TY - CONF A1 - Heckel, Thomas T1 - Akustische und elektromagnetische Prüfverfahren für verlegte Eisenbahnschienen N2 - In diesem Vortrag werden die aktuellen Techniken für die angewandte mechanisierte Schienenprüfung dargestellt und Perspektiven für die Zukunft der handgeführten und fahrzeuggeführten Prüftechnik aufgezeigt. Insbesondere wird hier die bildhafte Darstellung, der zusätzliche Nutzen von Arraysensoren sowie die Möglichkeiten der Simulation von Schienenfehlern vorgestellt. T2 - ZfP-Prüfertag 2019 im RB Südost CY - Halle, Germany DA - 13.11.2019 KW - Arraysensoren KW - Mechanisierte Schienenprüfung KW - Ultraschall KW - Wirbelstrom KW - Simulation PY - 2019 AN - OPUS4-49687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Gohlke, Dirk A1 - Völz, Uwe T1 - Analyseprüfung von Eisenbahnradsatzwellen mit Ultraschall T2 - DGZFP-Jahrestagung 2011 T2 - DGZFP-Jahrestagung 2011 CY - Bremen, Germany DA - 2011-05-30 PY - 2011 AN - OPUS4-25335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Büchler, Johannes T1 - Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung - Die Normenreihe DIN EN ISO 22232 ersetzt die DIN EN 12668 seit September 2021 N2 - Durch die Internationalisierung in der Standardisierung wurden die Regelwerke zur „Charakterisierung und Verifizierung der Ultraschall-Prüfausrüstung“, die bisher als europäische Regelwerke der DIN EN 12668 Reihe eingeordnet waren, überarbeitet und in internationale Regelwerke überführt. Die Regelwerke sind seit September 2021 als deutsche Übersetzung eingeführt als DIN EN ISO 22232 und ersetzen somit in Deutschland die bisher geltenden Regelwerke der DIN EN 12668 Reihe. Die drei Teile der Reihe beschäftigen sich in Teil 1 mit den Prüfgeräten, in Teil 2 mit den Prüfköpfen und in Teil 3 mit der Prüfausrüstung, die aus Prüfgerät, Prüfkopf und Kabel besteht. In dem Vortrag möchten wir neben dem historischen Werdegang darlegen, welche Gemeinsamkeiten und Unterschiede die Regelwerke aufweisen und worauf bei der Umstellung zu achten ist. T2 - Arbeitskreis Berlin der DGZfP – 431. Sitzung CY - Online meeting DA - 9.11.2021 KW - Ultraschall KW - Zerstörungsfreie Prüfung KW - Standardisierung KW - Gerätetechnik PY - 2021 AN - OPUS4-54308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Maierhofer, Christiane A1 - Gaal, Mate A1 - Schadow, Florian A1 - Brackrock, Daniel A1 - Blankschän, Michel A1 - Hosseini, Seyed A1 - Lodeiro, M. A1 - Segur, D. T1 - Comparison of the performance of ultrasonic non-destructive testing methods on inspection of fibre reinforced plastics N2 - In the last twenty years, components made of fibre-reinforced plastic became a prominently used material in safety-relevant structures. Periodic in-service inspection of these structures using reliable non-destructive testing methods became a relevant issue in the field. The goal of the EMRP-funded project VITCEA (Validated Inspection Techniques for Composites in Energy Applications) aims on the evaluation of the performance of various non-destructive testing methods on the inspection of fibre-reinforced plastics. In this talk the results of the comparison of different ultrasonic testing methods will be discussed. There are two challenges for the ultrasonic inspection of fibre-reinforced plastics. Firstly, different material properties of the fibre and the resin cause anisotropic acoustical behaviour of the material. Secondly, the physical layout of fibre layers leads to complex structures of fibre-reinforced plastic parts, and thus to a complex acoustical response. Both result in a reduction of the signal to noise ratio and make interpretation of measurement results rather extensive. During the VITCEA project, the acoustical behaviour of fibre-reinforced plate materials has been simulated. Specimens with artificial flaws for the evaluation of the detection thresholds have been designed and manufactured. Various mechanized ultrasonic testing methods including phased-array sensors, air-coupled transducers, immersion tank testing and contact technique have been evaluated on the specially designed specimen. Laboratory scale tests and a round robin test have been carried out. The probability of detection and the detection thresholds for each method have been estimated. T2 - ECNDT - European Conference on Non-Destructive Testing 2018 CY - Gothenburg, Sweden DA - 11.06.2018 KW - Comparison ndt methods FRP fibre reinforced plastics ultrasound PY - 2018 AN - OPUS4-47213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Die Gläserne Schiene T2 - DGZfP-Arbeitskreis München T2 - DGZfP-Arbeitskreis München CY - Munich, Germany DA - 2011-09-29 PY - 2011 AN - OPUS4-25297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Rühe, S. A1 - Fenger, S. T1 - Die Zukunft der automatisierten Schienenprüfung im Rahmen von Bahn 4.0 N2 - Die zerstörungsfreie Prüfung von Eisenbahnschienen wird mit Schienenprüfzügen durchgeführt. In den Prüfsystemen liegen alle Messdaten und Ortskoordinaten in digitaler Form vor. Mithilfe einer automatisierten Auswertung und Standardisierung der Datenformate ist eine Einbindung der Prüfergebnisse in Instandhaltungskonzepte möglich, die auf den Ideen von Industrie 4.0 bzw. Bahn 4.0 basieren. Für die Erhöhung der passiven Sicherheit der Komponente Schiene durch die automatisierte Klassifizierung von Anzeigen, deren Bewertung und Verortung kann eine moderne zerstörungsfreie Prüfung einen signifikanten Beitrag leisten. Dieser Grundgedanke wurde bereits bei der technischen Auslegung der Prüfsysteme in den Schienenprüfzügen berücksichtigt. In diesem Vortrag wird dargestellt, welche Möglichkeiten die installierte Technik bereits heute bereitstellt und welche Synergien mit einer automatisierten auf bildgebenden Methoden basierenden Bewertung in Zukunft möglich sind. T2 - RAIL-IT 2016 CY - München, Germany DA - 24.11.2016 KW - Schienenprüfung KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Industrie 4.0 KW - Signalverarbeitung KW - Sicherheit von Verkehrswegen KW - Instandhaltung PY - 2016 AN - OPUS4-39292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Zerbst, Uwe T1 - Einfluss von Save Life und Schadentoleranzkonzepten auf die ZfP von Eisenbahnradsatzwellen T2 - DGZfP-Jahrestagung T2 - DGZfP-Jahrestagung CY - Dresden, Germany DA - 2013-05-06 PY - 2013 AN - OPUS4-28576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Müller, Christina A1 - Sondermann, F. T1 - Einflussfaktoren auf die Prüfleistung bei der Wellenprüfung in der Ausbildung T2 - 8. Fachtagung Zerstörungsfreie Prüfung im Eisenbahnwesen T2 - 8. Fachtagung Zerstörungsfreie Prüfung im Eisenbahnwesen CY - Wittenberge, Germany DA - 2014-03-18 PY - 2014 AN - OPUS4-32215 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer T1 - Entwicklungstendenzen bei der Gruppenstrahlertechnik T2 - 4. Fachtagung ZfP im Eisenbahnwesen T2 - 4. Fachtagung ZfP im Eisenbahnwesen CY - Wittenberge, Germany DA - 2006-03-21 PY - 2006 AN - OPUS4-12247 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Preißel, M. A1 - Vrana, J. T1 - Ermittlung der Fehlerauffindwahrscheinlichkeit (POD) in Abhängigkeit von der Prüfrastergröße bei der Ultraschallprüfung großer Schmiedestücke mittels Simulation und Experiment T2 - DACH T2 - DACH CY - Salzburg DA - 2015-05-11 PY - 2015 AN - OPUS4-34021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Fachbereich 8.4 - Akustische Verfahren N2 - Die akustischen Verfahren der zerstörungsfreien Prüfung werden vorgestellt, die im Fachbereich 8.4 der BAM entwickelt werden. T2 - DGZfP Sitzung des Fachausschusses Luftfahrt CY - Berlin, Germany DA - 18.04.2019 KW - Ultraschall KW - Luftultraschall KW - Tauchtechnik KW - Geführte Wellen PY - 2019 AN - OPUS4-48069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Vahlsing, Thorsten A1 - Raum, Hanne A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Heckel, Thomas A1 - Beilken, D. A1 - Dilz, K. A1 - Rühe, S. T1 - FE-simulation of eddy current signals produced from basic model cracks for running surface rail defects N2 - Non-destructive testing for surface crack detection and head check depth quantification at the gauge corner of railway tracks can be achieved using eddy current methods. With the extension of the tested zone to the running surface, rail defect signal types other than head checks can be measured. Due to their mostly irregular shape, a quantitation based on a calibration against regular test cracks of varying depth may not be linear. Estimates of the expected influence of more complex crack patterns may be obtained by a finite element simulation of sufficiently simple limiting cases, like two displaced or intersecting cracks or a simply branched or flexed crack. As a first step, a 3D finite element model of the HC10 eddy current probe distributed by Prüftechnik Linke und Rühe (PLR), Germany was built and verified against measured results from an (easily fabricated) reference block with isolated long cracks. T2 - Railway Engineering 2019 CY - Edinburgh, UK DA - 03.07.2019 KW - Finite element analysis KW - Eddy current testing KW - Rail inspection PY - 2019 AN - OPUS4-48530 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Casperson, Ralf A1 - Gaal, Mate A1 - Pelkner, Matthias A1 - Prager, Jens T1 - Forschungsthemen im Bereich der ZfP mit akustischen und elektromagnetischen Methoden N2 - Die zerstörungsfreien Methoden zur Untersuchung und Charakterisierung von Materialien sowie zur Detektion von betriebsbedingten und herstellungsbedingten Fehlern mit akustischen und elektrischen Methoden werden vorgestellt. Schwerpunkt bilden die Ultraschall-, die Wirbelstrom- und die Streuflussprüfung. Die Verfahren werden anhand des Aufgabenspektrums des Fachbereiches 8.4 der BAM dargestellt. T2 - Lehrveranstaltung 0334 L 119 „Instrumentelle Analytik“ innerhalb des Moduls „Untersuchungsverfahren“ im Masterstudium des Studiengangs Werkstoffwissenschaften CY - BAM Berlin, Germany DA - 06.12.2019 KW - Ultraschallprüfung KW - Wirbelstromprüfung KW - Streuflussprüfung PY - 2019 AN - OPUS4-50014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Gohlke, Dirk A1 - Kotschate, Daniel T1 - High Resolutian Ultrasonic Measurements Using Immersion Technique T2 - ECNDT 2014 T2 - ECNDT 2014 CY - Prag (Tschechien) DA - 2014-10-06 PY - 2014 AN - OPUS4-31981 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Thomas, Hans-Martin A1 - Rühe, S. T1 - High Speed Non-Destructive Rail Testing with Advanced Ultrasound and Eddy-Current Testing Techniques T2 - 5th International Workshop Non-Destructive Testing in Progress T2 - 5th International Workshop Non-Destructive Testing in Progress CY - Prague, Czech Republic DA - 2009-10-12 PY - 2009 AN - OPUS4-20156 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Spruch, W. A1 - Jacob, S. T1 - Increasing the sensitivity of ultrasonic phased array wheel set axle inspection by using signal processing N2 - Der einwandfreie Zustand der Radsätze von Schienenfahrzeugen ist von größter Bedeutung für den sicheren Betrieb. Die Radsatzwellen werden durch eine große Zahl von Lastwechseln individuell unterschiedlich beansprucht. Dabei spielen viele Einflüsse wie äußere statische und dynamische Lasten, innere Lasten aufgrund von Unwuchten und inneren Spannungen und Umweltbedingungen entscheidende Rollen. Eine regelmäßige Prüfung ist daher obligatorisch. BTD entwickelt im Rahmen eines MNPQ-Projektes in Kooperation mit der BAM eine Phased Array Technik zur automatisierten Prüfung von Radsatzwellen im eingebauten Zustand. Die schwierigen Ankoppelbedingungen aufgrund der begrenzten Zugänglichkeit, der komplexen Geometrie sowie Farbschichten und Schmutz auf der Radsatzwelle stellen hierbei große Herausforderungen dar. Zu deren Bewältigung werden neben optimierten Prüfköpfen, einer in die Wasservorlaufstrecke integrierten akustischen Linse und einer speziellen Ankoppeltechnik auch Signalverarbeitungsalgorithmen eingesetzt. Die Darstellung der Signalverarbeitung ist der Schwerpunkt dieses Beitrages. Mit Hilfe von Messdatensätzen präparierter Testwellen werden verschiedene Algorithmen erprobt und hinsichtlich der Stabilität, dem Verhalten bezüglich der Ankoppelschwankungen und veränderter Wellengeometrien und der Fähigkeit zur automatischen Unterscheidung von Fehler- und Formanzeigen bewertet. Letztlich wird die beste Lösung im entwickelten Prüfsystem eingesetzt. T2 - 19th WCNDT - World Conference on Non Destructive Testing CY - München, Germany DA - 13.06.2016 KW - Ultrasound KW - Phased array KW - Wheelset KW - Railway KW - Signal processing PY - 2016 AN - OPUS4-37008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Müller, Christina A1 - Sondermann, F. T1 - Influencing factors on the inspection performance of wheel axle sets under training conditions T2 - 6th European-American Workshop on Reliability of NDE T2 - 6th European-American Workshop on Reliability of NDE CY - Minneapolis, USA DA - 2015-07-26 PY - 2015 AN - OPUS4-34588 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Müller, Christina A1 - Sondermann, F. T1 - Influencing factors on the inspection performance of wheel axle sets under training conditions T2 - QNDE T2 - QNDE CY - Minneapolis (USA) DA - 2015-07-25 PY - 2015 AN - OPUS4-34018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Is phased array the future in modern ultrasonic rail inspection? N2 - Compared to standard ultrasonic testing methods the application of phased arrays offers advantages and flexibility by the electronic steering possibilities to control the transmitted and received sound fields as well as the image based evaluation of the recorded scans. For more than one decade phased array systems have been introduced and used in the railway sector for the inspection of wheelsets in the workshops. Up to the present field applications of phased array systems in rail inspection are rather rare. On the other hand a lot of scientific work on rail testing using phased arrays has been carried out in the recent past. Mechanized ultrasonic rail inspection poses strong challenges e.g. due to the harsh environment, complex flaw types and high inspection speeds. Different tasks have to be carried out by non-destructive testing ranging from manufacturing inspection of thermite welds to in-service inspection for operational induced flaws in the rail head, rail web and rail foot as well as rolling contact fatigue. This work will give an overview and categorization of different present approaches for rail testing using phased array. Phased array systems typically offer digital image based inspection results. This make these systems become the perfect candidates to feed inspection data into a modern big data based workflow, using e.g. cloud computing, signal processing and data fusion for recording, positioning and tracking of flaws and artefacts in rails and to gain additional benefit. Evaluation of promising innovative approaches and solutions for phased array based ultrasonic rail inspection in the frame of “Industry 4.0” will be discussed. T2 - QNDE - Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Burlington, VT, USA DA - 15.07.2018 KW - Rail Inspection Phased Array Ultrasound PY - 2018 AN - OPUS4-47211 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Perez Alonso, M. T1 - Is there a need for a new standard for determination of steel cleanliness using high frequency ultrasonic testing? N2 - Increased use of high performance steel (HPS) for demanding applications calls for non-destructive ultrasonic testing methods which is covered by standards like SEP 1927 (1) and ASTM E588 (2). Here, an adaption of standards like increasing sensitivity and resolution of ultrasonic testing may be needed in order to improve determination of steel cleanliness. Modern requirements on standardization in that field have been evaluated during the INCAFAT project “A novel approach for rating fatigue-initiating inclusions in highly demanding steel” which was funded by the European Commission. Main results of this research show that an adapted standard should be open to different type of specimen due to the diversity in application. This includes a wide range from bars, rings and plates as well as different inspection sensitivities. An adapted standard should be open to the definition of the volume to be investigated and open to be selected by the user. Furthermore, for enhanced resolution the frequency range should be extended to higher frequencies. The use of focal beam probes shall be mandatory and probes should be selected according to the geometry of the specimen. Therefore, calibration procedures have to be improved significantly to allow proper sizing of indications. Indication height shall be directly transferred into an equivalent disc shaped reflector taking distance amplitude curves as well as signal amplitude distribution and signal travel time into account. A new standard draft proposal taking all these requirements into account has been filed in the frame of the INCAFAT project and is now on discussion. T2 - ECNDT - European Conference on Non-Destructive Testing 2018 CY - Gothenburg, Sweden DA - 11.06.2018 KW - Cleaniliness purity grade ultrasound non-destructive volumetric measurement standard PY - 2018 AN - OPUS4-47210 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Ist die Ultraschall-Phased-Array-Technik die Zukunft der mechanisierten Schienenprüfung im Zeitalter von Bahn 4.0? N2 - Die Ultraschall Phased-Array Technik bietet durch die variable elektronische Steuerung des Schallfeldes gegenüber konventioneller Prüftechnik Vorteile bei vielen Prüfaufgaben, sowohl bei der Datenaufnahme als auch der bildhaften Bewertung. Die mechanisierte Schienenprüfung stellt sehr hohe Anforderungen an die Prüftechnik insbesondere durch die hohen Prüfgeschwindigkeiten von bis zu 20 m/s. Im Rahmen dieses Vortrags wird evaluiert, welche Lösungsansätze auf Basis der Ultraschall Phased-Array Technik vielversprechend erscheinen für einen Einsatz im Umfeld von Bahn 4.0. T2 - 10. Fachtagung ZfP im Eisenbahnwesen CY - Wittenberge, Germany DA - 13.03.2018 KW - Eisenbahn KW - Phased Array KW - Ultraschall KW - Mechanisierte Schienenprüfung PY - 2018 AN - OPUS4-47214 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Prager, Jens A1 - Boehm, Rainer T1 - Neue Konzepte für die zerstörungsfreie Prüfung und die Zustandsüberwachung von Eisenbahnradsätzen mit Ultraschall N2 - Die regelmäßige Überprüfung von Eisenbahnradsatzwellen auf betriebsbedingte Schädigungen ist ein fester Bestandteil des Instandhaltungskonzeptes von Eisenbahnfahrzeugen. Insbesondere bei hohen Achslasten und hohen Rotationsgeschwindigkeiten ist eine detaillierte regelmäßige Prüfung notwendig. In den letzten Jahren wurden für diese Prüfaufgabe mechanisierte Ultraschallprüfsysteme entwickelt, erfolgreich eingeführt und etabliert. Für eine Weiterentwicklung dieser Technologie stehen die Themen Erhöhung der Auflösung, Reduzierung von Oberflächen- und Störeinflüssen, Verkürzung von Prüfzeiten, Verbesserung der POD, Verlängerung von Inspektionsintervallen, Vereinfachung der Auswertung und die Möglichkeit der Durchführung von Analyseprüfungen im Vordergrund. Es werden Ansätze und neue Konzepte zur Lösung dieser Herausforderungen vorgestellt. T2 - 9. Fachtagung Zerstörungsfreie Prüfung im Eisenbahnwesen CY - Wittenberge, Germany DA - 15.03.2016 KW - Zerstörungsfreie Prüfung KW - Eisenbahn KW - Radsatzwelle KW - Ultraschall KW - POD PY - 2016 AN - OPUS4-37006 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Rühe, S. A1 - Armbruster, R. A1 - Hintze, H. T1 - Neue Prüftechnik für den Schienenprüfzug, Erfahrungen, Fehlerbilder, Auswerttechniken T2 - DGZfP-Jahrestagung T2 - DGZfP-Jahrestagung CY - Münster, Germany DA - 2009-05-18 PY - 2009 AN - OPUS4-19527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Thomas, Hans-Martin T1 - New Developments for Non-Destructive Rail Testing T2 - Railway Engineering T2 - Railway Engineering CY - London, England DA - 2009-06-24 PY - 2009 AN - OPUS4-19585 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Perez Alonso, M. A1 - Dinkel, M. T1 - New standard propopsal for determination of steel cleanliness using high frequency ultrasonic testing N2 - Due to the market needs on steel for high demanding applications non-destructive methods for the determination of steel cleanliness using ultrasound have to be adapted to increase sensitivity respectively. The basic idea is that the new standard proposal should follow the basic line outs from SEP 1927 and ASTM E588. Additional to these relatives the standard should be open to different types of specimen and inspection frequencies to cover a wide range from bars, rings and plates as well as different inspection sensitivities. For an enhance in resolution the standard draft focuses on immersion focal beam probes which should be selected according to the geometry of the specimen. The selection should be proved with the aid of simulation tools. The frequency shall be at least 10 MHz. For specimen thicknesses of less than 6 mm a frequency of at least 25 MHz shall be used. Calibration procedures had to be improved significantly compared to the old standards to allow proper sizing of indications. Therefore calibration procedures shall take signal processing into account. For detailed evaluation of the amplitude dependency and for calibration a reference block with a sufficient number of reflectors has to be used. The recorded echo height shall be directly transferred into an equivalent disc shaped reflector EDSR by a distance amplitude curve. The novelty in this standard draft will be that based on 3D measurements and 3D evaluation the amplitude criterion of an indication becomes just one among some other criteria. This standard takes the signal amplitude, signal amplitude distribution and signal travel time for classification into account. The standard draft will be open to the definition of the volume to be investigated to be set by the user. This will make evaluation more comparable to other methods because the inspected area has to be user defined. We recommend CEN/TC 138 to decide on a work item for this proposal to become an EU and an ISO standard using Vienna agreement. The research leading to these results has received funding from the European Union's Research Fund for Coal and Steel (RFCS) research programme under grant agreement n° RFSR-CT-2013-00014. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Standardisation KW - Ultrasound KW - Steel cleanliness PY - 2017 AN - OPUS4-41148 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Zerbst, Uwe A1 - Carboni, M. T1 - Non-destructive testing and fracture mechanics T2 - QNDE T2 - QNDE CY - Minneapolis DA - 2015-07-25 PY - 2015 AN - OPUS4-34016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Brackrock, Daniel A1 - Gaal, Mate A1 - Gohlke, Dirk A1 - Hosseini, Seyed A1 - Schadow, Florian A1 - Riemer, Stefanie T1 - Non-Destructive ultrasonic investigations on FRP structures N2 - Components made of fibre-reinforced plastic are a prominently used material in modern safety-relevant structures. Periodic in-service non-destructive inspection of these structures is necesary. The EMRP-funded project VITCEA aims on the evaluation of the performance of various non-destructive testing methods on the inspection of fibre-reinforced plastics. The physical layout of fibre layers leads to complex structures of fibre-reinforced plastic parts. Furthermore different material properties of the fibre and the resin cause anisotropic behaviour of the material.This poses a challenge for ultrasonic NDT by causing a complex acoustical response. The acoustical behaviour of fibre-reinforced plate materials has been simulated. Specimens with artificial flaws for the evaluation of the detection thresholds have been designed and manufactured. Mechanized ultrasonic testing methods using phased-array sensors, air-coupled transducers, immersion tank testing and contact technique have been evaluated on the specimen. In this talk results of different ultrasonic testing methods will be compared and discussed. T2 - VITCEA Steakholder Workshop CY - NPL, London, UK DA - 7.6.2017 KW - FRP KW - Fiber reinforced platic KW - Ultrasound KW - Matrix array KW - ACUT KW - Air coupled KW - Non-destructive testing PY - 2017 AN - OPUS4-41153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Klinger, Christian A1 - Bettge, Dirk T1 - Outcome of the Cologne Accident Investigation T2 - WOLAXIM-Project Kickoff-Meeting T2 - WOLAXIM-Project Kickoff-Meeting CY - Cambridge, England DA - 2010-11-22 PY - 2010 AN - OPUS4-22816 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Prüfung von Eisenbahnschienen mit dem Schienenprüfzug bei hohen Geschwindigkeiten bis 20 m/s T2 - Bahntechnik-Symposium 2011 T2 - Bahntechnik-Symposium 2011 CY - Berlin, Germany DA - 2011-12-09 PY - 2011 AN - OPUS4-25255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Heckel, Thomas A1 - Spruch, Wolfgang A1 - Beggerow, Toni T1 - Schnelle Ultraschallprüfung von längsgebohrten Eisenbahnradsatzwellen mit Phased Array Rotationsscanner N2 - Im Rahmen des Europäischen Projektes RAAI* wird speziell für längsgebohrte Eisenbahnradsatzwellen von Hochgeschwindigkeitszügen eine Phased Array Technik angepasst, mit dem Ziel einer nahezu 100%igen Rissprüfung (Tiefe 2-3 mm) ohne die Demontage der Wellen und einer Prüfzeitreduzierung von 75%. Die Technik arbeitet mit einem Phased Array, bei dem die Schwingerelemente auf einem Kegelstumpf angeordnet sind. Für die Abtastung in Umfangsrichtung erlaubt das Phased Array die schnelle Rotation und zusätzlich das Fokussieren und Schwenken des Schallbündels. In Richtung der Achse wird das Prüfkopfsystem mechanisch bewegt. In vorangegangenen Projekten ist das Prinzip dieser Prüftechnik entwickelt und die Tauglichkeit gezeigt worden. Die jetzigen Arbeiten haben insbesondere die Optimierung der Sensortechnik an die o.g. Aufgabe zum Ziel. Wegen der ungewöhnlichen Geometrie des Arrays sind umfangreiche Simulationsrechnungen nötig, um die Auswirkung von zahlreichen Parametern auf die Schallfeldform und letztlich auf die Empfindlichkeit und die Ortsauflösung zu untersuchen und die Konstruktionsdaten zu bestimmen. Zur Validierung der Prüftechnik werden Tests an typischen Eisenbahnradsatz-wellen durchgeführt. Der Einsatz von unterstützenden Signalverarbeitungsalgorith-men bei der Auswertung der Prüfergebnisse zur sichereren Fehlererkennung ist u.a. wegen des möglichen geringen Messpunktabstandes für diese Prüftechnik besonders vielversprechend. Der Stand der Entwicklung wird gezeigt. T2 - DGZfP Jahrestagung 2017 CY - Koblenz, Germany DA - 22.05.2017 KW - Phased array KW - Radsatzwellen KW - Ultraschall KW - Kegelarray KW - Eisenbahnradsatz KW - Innenprüfung KW - ZfP KW - Bahn KW - Kegel KW - Innenbohrung KW - Prüfung PY - 2017 AN - OPUS4-41154 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Casperson, Ralf A1 - Rühe, Sven A1 - Mook, Gerhard T1 - Signal processing for non-destructive testing of railway tracks N2 - Increased speed, heavier loads, altered material and modern drive system concepts result in an increasing number of flaws in railways. Caused by the rapid change in damage mechanism by modern rolling stock the appearance of the flaws also alters. Hence, interpretation of non-destructive rail testing results may become difficult. Caused by the changed interplay between detection method and flaw the recorded signals will result in an unknown type for the rail flaws type classification. Methods for automatic rail inspection according to defect detection and classification have been developed continuously. Signal processing is a key technology to master the challenge of classification and maintain resolution and detection quality independently of operation speed. The basic ideas of signal processing based on the Glassy-Rail-Diagram for classification purposes will be presented. Examples for the detection of damages caused by rolling contact fatigue are given. Synergetic effects of combined evaluation of diverse inspection methods are shown. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Rail testing KW - Signal processing KW - Ultrasound PY - 2017 AN - OPUS4-41150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Wack, Yannick A1 - Mook, G. T1 - Simulation of an instrumented ultrasonic test run with a rail inspection train N2 - Rail inspection performed by ultrasonic rail inspection trains is a complex and challenging process. A large number of variables and parameters given by the environment, the track and the testing-system have an influence on the overall performance of the inspection and the inspection result. Typically the parameter vary in a combination depending on the track condition. To evaluate the individual influence of each relevant variable, simulation tools can be used. Therefore the entire inspection process has to be transferred into a model using combined modelling techniques. The goal of this work is to model an instrumented ultrasonic test run with a rail inspection train with the parameters varied by a script over a virtually driven distance. T2 - 46th Annual Review of Progress in Quantitative Nondestructive Evaluation- QNDE 2019 CY - Portland, OR, USA DA - 14.07.2019 KW - Simulation KW - Ultrasound KW - Rail inspection KW - Modelling PY - 2019 AN - OPUS4-49684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Boehm, Rainer A1 - Heckel, Thomas T1 - Simulation of sparse matrix array designs N2 - Matrix phased array probes become more and more prominent to be used in industrial applications. The main drawbacks, using probes incorporating a very large number of transducer elements, are the needs for an appropriate cabling and an ultrasonic device offering many parallel channels. Matrix arrays designed for extended functionality feature at least 64 or more elements. Typical arrangements are square matrices, e.g. 10 by 10 or 11 by 11 or rectangular matrices, e.g. 8 by 16 or 10 by 12 to fit a 128-channel phased array system. In some phased array systems, the number of simultaneous active elements is limited to a certain number, e.g. 32 or 64. Those setups do not allow to run the probe with all elements active which may cause a significant change in the directivity pattern of the resulting sound beam. When only a subset of elements is possible to use during a single acquisition, different strategies may be applied to collect enough data for rebuilding the missing information from the echo signal. Omission of certain elements may be one approach, overlay of subsequent shots with different active areas may be another one. This paper presents the influence of decreased number of active elements on the sound field and their distribution on the array. An example for 16 active elements out of 121 is given in Figure 1. The sound field divergence and its shape basically remain the same, while the sensitivity is reduced and the amplitudes of the speckle-like side lobes increase significantly. Solutions using subsets with different element activity patterns on matrix arrays and their advantages and disadvantages concerning the sound field are evaluated using semi-analytic simulation tools. Sound field criteria regarding the consequences for NDT test results and the system setup are discussed. T2 - QNDE 2017 CY - Provo, UT, USA DA - 17.07.2017 KW - Ultrasound KW - Sparse array KW - Simulation PY - 2017 AN - OPUS4-41149 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Simulation of Wave Propagation and Soundfield Pattern for Ultrasonic NDT Methods T2 - Inotesting Wildau T2 - Inotesting Wildau CY - Wildau DA - 2015-02-19 PY - 2015 AN - OPUS4-32713 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Gravenkamp, Hauke T1 - Simulation of Wave Propagation and Soundfield Pattern of Ultrasonic NDT Methods T2 - Innotesting T2 - Innotesting CY - Wildau DA - 2015-02-20 PY - 2015 AN - OPUS4-34020 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Wack, Yannick A1 - Mook, G. T1 - Simulation von mechanisierten Eisenbahnschienenprüfungen mit Ultraschall N2 - Bei der mechanisierten Prüfung von verlegten Eisenbahnschienen mit Schienenprüfzügen werden große Prüfdatenmengen mit einer komplexen Prüfkopfanordnung in kurzer Zeit bei hohen Prüfgeschwindigkeiten aufgenommen. Der Typ und der Zustand des Gleises kann während der Prüfung in schnellem Wechsel streckenabhängig variieren, z.B. unterschiedliche Schienentypen oder Abnutzung sowie beim Durchfahren von Weichenstraßen. Der logistische Aufwand diese Prüfung insgesamt durchzuführen ist dabei sehr hoch und eine Wiederholung der Prüfung in einem kurzen Zeitintervall nicht möglich. Es werden während der Prüfdatenaufnahme bereits Datenreduktionsverfahren, Rekonstruktionsverfahren und Online-Parametervariationen eingesetzt, um die Ergebnisdaten zum einen in Ihrer Menge zu begrenzen zum anderen auf die lokalen Geometrie- und Zustandsänderungen des Prüfobjektes Schiene zu reagieren. Im Regelwerk EN 16729-1 „Zerstörungsfreie Prüfung an Schienen im Gleis -Teil 1: Anforderungen an Ultraschallprüfungen und Bewertungsgrundlagen“ werden Bezugsreflektoren definiert, um die Leistung automatisierter Ultraschallsysteme für die Schienenprüfung zu verifizieren. Um die Einflüsse der komplexen Randbedingungen der mechanisierten Schienenprüfung auf das Prüfergebnis evaluieren zu können, wurde ein Softwarewerkzeug erarbeitet, mit dem eine Prüffahrt auf einer Schiene simuliert werden kann. Basierend auf der Datenaufnahme mit dem Glassy-Rail-Diagramm können alle relevanten Prüfparameter und Artefakte in Schienen sowie Störeinflüsse bei der Simulation berücksichtigt werden. T2 - DGZfP DACH Tagung 2019 CY - Friedrichshafen, Germany DA - 27.05.2019 KW - Eisenbahnschienen KW - Simulation KW - Zerstörungsfreie Prüfung KW - Ultraschall PY - 2019 AN - OPUS4-49682 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer T1 - TFM und FMC für die bildgebende Ultraschallprüfung mit Arrays N2 - Im Rahmen des Vortrages wird das Verfahren zur Total Focussing Methode (TFM) auf Basis des Full Matrix Captures (FMC) für Ultraschallarrayprüfköpfe erläutert und die Möglichkeiten der Anwendung für die Prüfung von Gussteilen diskutiert. Der Stand der Normung im Bereich Guss wird diskutiert. T2 - Sitzung des Fachausschusses Eisenguss des BDG CY - Berlin, Germany DA - 12.09.2019 KW - Standardisierung KW - Array KW - Ultraschall KW - TFM KW - MFC KW - Guss PY - 2019 AN - OPUS4-49688 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas T1 - Thema Validated Inspection Techniques for Composites in Energy Applications - Inspection technique Ultrasound T2 - VITCEA Workshop T2 - VITCEA Workshop CY - Berlin DA - 2015-02-17 PY - 2015 AN - OPUS4-34019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Boehm, Rainer A1 - Mook, G. T1 - Ultrasonic Rail inspection with array Probes N2 - For more than 60 years ultrasonic rail inspection is used as non-destructive testing method to ensure the safe operation of rail tracks. Constantly increasing traffic density and heavy loads have been the motor for the development of new test equipment from handheld devices to rail inspection trains. (Krull 2003)Up to the present most of the system solutions feature conventional ultrasonic transducers housed in wheel-type and slide-type probes. Different tasks have to be carried out during an in-service inspection for flaws in the rail head, rail web and rail foot as well as rolling contact fatigue (Heckel 2018). The more tasks the inspection system has to perform, the more probes are needed. Compared against standard ultrasonic testing methods the application of array probes offers advantages and flexibility by the electronic steering possibilities to control the transmitted and received sound fields. This allows to increase functionality by software while decreasing the number of probes needed in hardware in parallel. One drawback in application of phased array probes is that the repetition frequency of the subsequent measurements will be reduced by the number of virtual probe functions each phased array probe has to perform. This may limit the range of use for phased array probes in high speed applications. To overcome these limits special designs for array probes and signal processing are necessary. T2 - Railway Engineering 2019 CY - Edinburgh, UK DA - 03.07.2019 KW - High speed KW - Ultrasound KW - Rail inspection KW - Phased array probes PY - 2019 AN - OPUS4-49681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Brekow, Gerhard A1 - Mrasek, Heinz T1 - Ultrasonic testing with matrix arrays, applications in non-destructiv testing T2 - 9th European Conference on Non-Destructive Testing (ECNDT) T2 - 9th European Conference on Non-Destructive Testing (ECNDT) CY - Berlin, Germany DA - 2006-09-25 PY - 2006 AN - OPUS4-12633 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Maierhofer, Christiane T1 - Verbesserung der zerstörungsfreien Prüfung vor Ort durch den Einsatz bildgebender Verfahren T2 - Wissenschaft trifft Handwerk T2 - Wissenschaft trifft Handwerk CY - Leipzig, Germany DA - 2011-03-15 PY - 2011 AN - OPUS4-23498 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Maierhofer, Christiane T1 - Verbesserung der zerstörungsfreien Prüfung vor Ort durch den Einsatz bildgebender Verfahren T2 - Wissenschaft trifft Handwerk T2 - Wissenschaft trifft Handwerk CY - Berlin, Germany DA - 2010-09-22 PY - 2010 AN - OPUS4-23497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Bartholmai, Matthias A1 - Niederleithinger, Ernst A1 - Waske, Anja A1 - Bruno, Giovanni A1 - Krebber, Katherina A1 - Maierhofer, Christiane A1 - Kruschwitz, Sabine A1 - Bertovic, Marija A1 - Daum, Werner T1 - Zerstörungsfreie Prüfung @ BAM N2 - Die Schwerpunktthemen für die Forschung der BAM im Bereich der zerstörungsfreien Prüfung werden vorgestellt. Es stehen die aktuellen Forschungsprojekte der Fachbereiche 8.1 bis 8.7 der Abteilung 8 und des Arbeitsgebietes Probabilistische Sicherheits- und Zuverlässigkeitsanalysen von Frau Dr. Bertovic sowie der Nachwuchsgruppe von Frau JProf. Dr. Kruschwitz im Vordergrund. T2 - Young Professionals Aerospace 2019 CY - Wildau, Germany DA - 25.11.2019 KW - Zerstörungsfreie Prüfung KW - Sensorik KW - Bauwesen KW - Radiografie KW - Ultraschall KW - Wirbelstrom KW - Computertomografie KW - Faseropische Sensorik KW - Thermografie KW - Human Factors PY - 2019 AN - OPUS4-50013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -