TY - JOUR A1 - Gradt, Thomas A1 - Schneider, Thomas A1 - Lingertat, J. A1 - Hathiramani, D. A1 - Junghanns, P. A1 - Aßmus, Kristin A1 - Schauer, F. T1 - Cryogenic vacuum tests of scaled down narrow support elements for the W7-X coil system JF - Fusion engineering and design KW - Wendelstein 7-X KW - Magnet system KW - Narrow support elements KW - Friction KW - MoS2 PY - 2009 DO - https://doi.org/10.1016/j.fusengdes.2008.11.075 SN - 0920-3796 VL - 84 IS - 2-6 SP - 840 EP - 843 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-19662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brice, H. A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Frictional behavior of material couples in superconducting MRI magnet systems at 4.2 K JF - IEEE transactions on applied superconductivity N2 - Windings in superconducting magnets operating at 4.2 K are highly susceptible to quenching caused by small frictional heat inputs. Small movements in the magnet system are inevitable during ramping due to the increasing electromagnetic forces. Friction pairs of polymer based materials have been investigated at 4.2 K to gain an understanding of their sliding behavior in conditions representative of superconducting MRI systems. The results indicate that polymer-polymer pairs experience unstable sliding behavior with repeated stick-slip whereas polymer-aluminum couples have stable sliding behavior up to high contact pressures of 20 MPa. KW - Cryotribology KW - Friction KW - MRI magnets KW - Stick-slip PY - 2012 DO - https://doi.org/10.1109/TASC.2011.2175683 SN - 1051-8223 VL - 22 IS - 3 SP - 4400204-1 - 4400204-4 PB - Inst. CY - New York, NY, USA AN - OPUS4-26384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weihnacht, V. A1 - Makowski, S. A1 - Brückner, A. A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Tribologie und Anwendung trocken laufender ta-C-Schichten JF - Tribologie und Schmierungstechnik KW - Tribologie KW - Verschleißschutzschichten KW - ta-C KW - DLC KW - Reibung KW - Verschleiß KW - Trockenreibung KW - Vakuumtribologie KW - Friction KW - Wear KW - Dry-running condition KW - Vacuum tribology PY - 2012 SN - 0724-3472 VL - 59 IS - 6 SP - 41 EP - 44 PB - Expert Verlag CY - Renningen AN - OPUS4-28004 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Friction and wear of PEEK composites in vacuum environment JF - Wear N2 - The sliding performance of PEEK composites was investigated in vacuum environment. Tests were performed with carbon fibre reinforced PEEK composites filled with PTFE, and MoS2 or graphite as further solid lubricant. Polymer samples were tested in a pin-on-disc configuration continuously sliding against CrNi-steel. Depending on sliding speed and temperature, the MoS2 filled composites showed high wear resistance and friction coefficients as low as PVD coatings. KW - PEEK composites KW - Vacuum KW - Friction KW - Wear KW - MoS2 KW - Graphite PY - 2010 DO - https://doi.org/10.1016/j.wear.2010.04.007 SN - 0043-1648 VL - 269 IS - 3-4 SP - 278 EP - 284 PB - Elsevier CY - Amsterdam AN - OPUS4-22046 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Géraldine A1 - Gradt, Thomas T1 - Friction and wear behaviour of polymers in liquid hydrogen JF - Cryogenics N2 - The tribological behaviour of polymer composites were investigated in liquid hydrogen at -253°C and compared with previous results obtained in gaseous hydrogen at ambient temperature. KW - Polymers KW - Friction KW - Wear KW - Hydrogen KW - Cryogenic temperature PY - 2018 DO - https://doi.org/10.1016/j.cryogenics.2018.05.002 SN - 0011-2275 VL - 93 SP - 1 EP - 6 PB - Elsevier CY - Amsterdam AN - OPUS4-44886 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gradt, Thomas A1 - Scheuerlein, Ch. A1 - Lackner, F. A1 - Savary, F. T1 - Friction coefficient between the Ti6Al4V loading pole and the 316LN steel shims of the HL-LHC 11 T magnets JF - IEEE Transactions on Applied Superconductivity N2 - The paper deals with a tribosystem in the magnet system of the Large Hadron Collider High Luminosity upgrade (HL-LHC) project. KW - Accelerator magnets KW - Friction KW - Molybdenum disulphide KW - Solid lubricants KW - Superconducting magnets PY - 2018 DO - https://doi.org/10.1109/TASC.2018.2792469 VL - 28 IS - 3 SP - 4005703 PB - IEEE AN - OPUS4-44621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Friction and wear behaviour of graphite filled polymer composites in hydrogen environment JF - Tribology online N2 - High performance polymer composites have been intensively investigated for tribological applications in air, but rarely in hydrogen environment. Author's previous benchmark of composites in liquid hydrogen (LH2) showed that graphite filled polymers have beneficial friction behaviour in this extreme condition. Therefore, further investigations have been undertaken in hydrogen environment. This paper presents first results obtained with polyimide composites filled with different types (natural, synthetic) and amounts of graphite in air, vacuum and hydrogen environments. A particular attention is taken to the influence of hydrogen on graphite as well as on the polymer matrix. KW - Polymer composites KW - Polyimide KW - Graphite KW - Friction KW - Wear KW - Hydrogen environment KW - Vacuum PY - 2015 DO - https://doi.org/10.2474/trol.10.207 SN - 1881-2198 VL - 10 IS - 2 SP - 207 EP - 212 CY - Tokyo, Japan AN - OPUS4-33554 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Géraldine A1 - Gradt, Thomas T1 - Influence of counterface and environment on the tribological behaviour of polymer materials JF - Polymer Testing N2 - This paper focuses on the influence of the counterface materials on the sliding behaviour of polymer materials in hydrogen. Polyimide (PI), polyetheretherketone (PEEK) and Polytetrafluoroethylene (PTFE) materials were investigated against hardened 52100 martensitic bearing steel and 304 austenitic stainless steel with similar roughness (Ra = 0.2 μm). Results indicate that the friction and wear of PI and PEEK materials depend on the counterface material. This effect wasn’t observed for PTFE composites. While the tribological performance of polyimide is better against 52100 in hydrogen, improved sliding behaviour of PEEK materials is observed with 304 counterface, particularly at higher sliding speed. Surface analyses of the transfer film reveal that the influence of the counterface is primarily related to the chemical nature of the steel for PI and to the thermal conductivity of the disc for PEEK materials. KW - Friction KW - Wear KW - Polymers KW - Hydrogen Transfer Film PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-515483 DO - https://doi.org/10.1016/j.polymertesting.2020.106912 VL - 93 SP - 106912 PB - Elsevier Ltd. AN - OPUS4-51548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theiler, Géraldine A1 - Harsha, A. P. A1 - Gradt, Thomas T1 - On the sliding wear behavior of PEAK composites in vacuum environment JF - Journal of Tribology N2 - The tribological behavior of neat and filled PEEK and PEKK composites were compared in air and vacuum conditions. Very low friction and wear coefficient were obtained at low sliding speed while severe wear occurred at high speed. Experimental results are discussed by analysing the transfer film and wear debris. KW - PEAK KW - Composites KW - Wear KW - Friction KW - Vacuum PY - 2019 DO - https://doi.org/10.1115/1.4042271 SN - 0022-2305 SN - 0742-4787 VL - 141 IS - 4 SP - 044502-1 EP - 044502-7 PB - ASME AN - OPUS4-47298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hausberger, A. A1 - Major, Z. A1 - Theiler, Geraldine A1 - Gradt, Thomas T1 - Observation of the adhesive - and deformation - contribution to the friction and wear behaviour of thermoplastic polyurethanes JF - Wear N2 - In this study unfilled and graphite filled thermoplastic polyurethanes (TPU) were investigated in tribological pin-on-disc tests. KW - TPU KW - Friction KW - Wear KW - Adhesion KW - Deformation KW - Vacuum PY - 2018 DO - https://doi.org/10.1016/j.wear.2018.07.006 SN - 0043-1648 SN - 1873-2577 VL - 412-413 SP - 14 EP - 22 PB - Elsevier CY - Amsterdam AN - OPUS4-45897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -