TY - JOUR A1 - Schlick-Hasper, Eva A1 - Neitsch, Marcel A1 - Goedecke, Thomas T1 - Industrial leak testing of dangerous goods packagings N2 - The Dangerous Goods Regulations currently do not include limit leakage rates orsensitivity requirements for industrial leak testing procedures that are equivalent tothe bubble test, which is the prescribed test method for design type testing ofdangerous goods packagings. During series production of such packagings, variousmethods are used, which often do not meet the requirements of the bubble test withregard to important criteria.Sensitivity, flow direction, pressure level and automatability are particularly importantfactors when selecting a suitable industrial leak testing method.The following methods are in principle both suitable and equally effective as thebubble test: pressure rise test (vacuum chamber), ultrasonic bubble leak detectionand gas detection methods (pressure technique by accumulation and vacuumchamber technique).To ensure a uniform test level during design type testing and production line leaktesting and therefore a comparable safety level as required by the Dangerous GoodsRegulations, it is necessary to include a more precise specification in these regula-tions. This requires, on the one hand, information about the sensitivity of the bubbletest and, on the other hand, the inclusion of a list of suitable, equally effective indus-trial test methods with their specific boundary conditions. T2 - 22nd IAPRI World Packaging CY - Online meeting KW - Bubble test KW - Dangerous goods packagings KW - Industrial leak testing KW - Leakproofness test KW - Series production PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-507521 DO - https://doi.org/10.1002/pts.2502 SP - 1 EP - 14 PB - Wiley AN - OPUS4-50752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bethke, John A1 - Goedecke, Thomas A1 - Jahnke, Wolfgang T1 - Permeation through plastic dangerous goods packaging during transport in freight containers - Detection of potentially explosive mixtures in containers under normal conditions of carriage N2 - The key point within the scope of this research project was to find out whether there was a risk of creating an explosive atmosphere by permeation of flammable liquid compounds during transport of dangerous goods in freight containers under normal conditions of carriage. Therefore, all aspects that had an influence on the formation of such an atmosphere had to be considered. The most important influencing factors were permeation, air change in the freight container and ambient temperature. The first step was to investigate the permeation with different packaging materials, charge and temperatures. Furthermore, the air change rates of different freight containers were measured. A few climate tests with containers on ships, e.g. to Singapore, were performed to assess normal conditions of carriage. Another important point was measuring the solvent (toluene) concentration in the gas phase in a freight container loaded with plastic intermediate bulk containers (IBCs) filled with toluene. To confirm that the measured values were in the right range, the toluene concentration in the gas phase in a container was calculated with different packaging materials, air change rates and temperatures. The results of the measurements and calculations have shown that safety layers in the packaging wall, e.g. the copolymer of ethylene and vinyl alcohol (EVOH) and polyamide, can reduce the rate of permeation by more than a decimal power, but the lower explosive limit of toluene is easily reached within a few hours at 40°C charge temperature if there is no barrier. KW - Permeation KW - Air change KW - Dangerous goods KW - Lower explosive limit KW - Freight container PY - 2013 DO - https://doi.org/10.1002/pts.994 SN - 0894-3214 VL - 26 IS - 1 SP - 1 EP - 15 PB - Wiley CY - Chichester, UK AN - OPUS4-31075 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Goedecke, Thomas T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept N2 - Abstract: The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. T2 - IAPRI Member Conference 2021 CY - Online meeting DA - 15.06.2021 KW - Bags KW - Dangerous goods packagings KW - Sift-proofness KW - Particles KW - Leak PY - 2021 UR - https://whova.io/email/click/d11d7d6cf1c84dfdc8c12349468fe91c/c9af5bcf002312cff80d9b962d1014e4/ SN - 978-1-63821-160-0 SP - 390 EP - 405 PB - IAPRI CY - East Lansing, Michigan, USA AN - OPUS4-52786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Thomas, Goedecke T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept N2 - The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. KW - Bags KW - Dangerous goods packagings KW - Leak KW - Particles KW - Sift-proofness PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527287 DO - https://doi.org/10.1002/pts.2575 SN - 0894-3214 VL - 34 IS - 7 SP - 435 EP - 446 PB - Wiley AN - OPUS4-52728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Vogler, Nico A1 - Goedecke, Thomas T1 - Flow properties of powdery or granular filling substances of dangerous goods packagings - Comparison of the measurement of the angle of repose and the determination of the Hausner ratio N2 - To ensure safety when transporting dangerous goods, it is important to specify the flow properties of the respective solid filling substance of the packagings. For this purpose, the angle of repose is currently used for the UN approvals in Germany. Measurements were carried out on 12 powdery or granular substances applying the angle of repose measuring methods customary in the test centres. The results of the methods differ significantly from each other. In addition, some of the techniques cannot be applied for very cohesive or coarse-grained materials. The results for the angle of repose show a strong scatter for some constellations (coefficient of variation more than 20 %). Safety during transport of dangerous goods cannot be guaranteed with this currently practiced system of measuring the angle of repose. As a consequence, an alternative parameter to characterize the flow properties of bulk materials should be used in the recognized test centers for dangerous goods packagings, such as the Hausner ratio. This approach leads to more precise test results for the substances examined (maximum coefficient of variation 2.8 %). It also has advantages in terms of applicability and occupational safety. Since the flow properties are safety-relevant, both in terms of mechanical safety and safety against the release of dangerous substances, the testing practice in the recognized test labs should be improved and standardized. KW - Sift-proofness KW - Powders KW - Flowability KW - Flow properties KW - Angle of repose KW - Hausner ratio PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552990 DO - https://doi.org/10.1002/pts.2678 SP - 1 EP - 18 PB - Wiley online library AN - OPUS4-55299 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Goedecke, Thomas T1 - How To Measure The Angle of Repose of Hazardous Substances in the Test Centers for Dangerous Goods Packagings N2 - The flow properties of powdery or granular filling substances for dangerous goods packagings are safety-relevant parameters. To specify the flow behavior, the angle of repose is measured in the recognized test centers for dangerous goods packagings in Germany. Previous investigations performed on non-hazardous substances revealed that some of the methods currently used have disadvantages in application. Additionally, for occupational health and safety reasons, it was generally viewed critically to carry out measurements of the angle of repose for dangerous goods at all. Instead, the dimensionless Hausner ratio to describe the flow behavior was proposed. In this work, the investigations were extended to real hazardous substances to concretize the assessment. Five exemplary hazardous substances were tested for their angle of repose using the methods commonly applied in the test centers. The Hausner ratio was also determined. In addition, the influence of a different climatic preconditioning on the angle of repose measurement was examined using three selected non-hazardous bulk materials. The results show that the measurement of the angle of repose is not fundamentally excluded for dangerous goods. However, for reasons of applicability, repeatability and occupational health and safety, only the ISO method can be applied for dangerous filling substances. This method provides conservative results regarding a safety-related evaluation of flow properties for the transport of dangerous goods. In principle, both the ISO method and the determination of the Hausner ratio can be used for dangerous goods. It is also essential especially with finely powdered filling goods, to carry out controlled preconditioning. KW - Angle of repose KW - Flow properties KW - Flowability KW - Hausner ratio KW - Powders KW - Sift-proofness PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-576552 DO - https://doi.org/10.1002/pts.2756 SN - 0894-3214 SP - 1 EP - 20 PB - Wiley AN - OPUS4-57655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Sift-proofness of Dangerous Goods Packagings - An Incompletely Defined Requirement N2 - Sift-proofness is a requirement for different types of dangerous goods packagings for solid substances according to the international Dangerous Goods Regulations. In these regulations, a sift-proof packaging is defined as a packaging that is completely impermeable to dry contents. This means indirectly that absolutely no mass transport of solid substances is allowed. Moreover, this requirement applies both to the original filling substance and to fine solid material generated during transport. Further specifications, test conditions or tolerable limit values are not given. This is in contrast to physical principles and the usual practice in other fields of technology in which sift-proofness is relevant. This paper shows the necessary steps for how the requirements for sift-proofness of dangerous goods packagings can be defined more precisely. Physical basics of the term ‘sift-proofness’ are explained. A qualitative as well as a quantitative approach is possible. In any case, it is essential to carry out appropriate vibration tests to assess the siftproofness. There is a need for systematical investigations of the sift-proofness of dangerous goods packagings. KW - Dangerous goods packagings KW - Sift-proofness KW - Leak proofness KW - Dust KW - Particles PY - 2018 DO - https://doi.org/10.1002/pts.2307 SN - 0894-3214 SN - 1099-1522 VL - 31 IS - 5 SP - 235 EP - 245 PB - Wiley & Sons, Ltd. AN - OPUS4-44763 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Drousch, Björn A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Maximum gauge pressure in dangerous goods packagings under normal conditions of carriage - comparison of direct measurement and calculation N2 - The objective of this work was to determine the maximum gauge pressure in the vapour phase above the liquid in different design types of dangerous goods packagings under normal conditions of carriage. The design types investigated were steel and plastic packagings with a volume of approximately 6 l. Two different methods were applied. In method 1, the pressure inside the packaging filled with a certain filling substance (dichloromethane) was directly measured under simulated conditions of carriage (degree of filling: 90%; filling temperature: 15°C; temperature during storage: 31°C). The maximum measured gauge pressures were between 89 mbar for a light plastic jerrican and 336 mbar for a steel drum. In method 2, the gauge pressure was calculated. The consideration of a rigid packaging combined with the assumption of a vapour pressure of zero during filling and sealing can serve as a worst case scenario. The calculated gauge pressure is approximately 1061 mbar. This procedure leads to the highest safety factor and does not require any experimental investigations. For a more realistic approximation of the gauge pressure of a non-rigid packaging, a packaging-specific function of relative expansion can be used, which is determined by a hydraulic pressure test. The calculated values ranged from 105 to 347 mbar. Method 2 provides conservative results. No hazardous filling substance is needed, and it allows a prediction of gauge pressure for other temperatures, substances and filling degrees. Therefore, this method could serve as alternative to UN Model Regulations 6.1.5.5.4 (a). KW - Dangerous goods packagings KW - Gauge pressure KW - Overpressure KW - Relative expansion KW - Data loggers KW - Normal conditions of carriage KW - Gefahrgutverpackungen KW - Überdruck KW - Relative Ausdehnung KW - Datenlogger KW - Normale Beförderungsbedingungen PY - 2015 DO - https://doi.org/10.1002/pts.2111 SN - 0894-3214 VL - 28 IS - 5 SP - 437 EP - 460 PB - Wiley & Sons, Ltd. CY - Chichester, UK AN - OPUS4-33108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menrad, Andreas A1 - Goedecke, Thomas A1 - Wagner, M.H. T1 - Drop test of plastic packagings - Correlation with material parameters and change of packaging behaviour after impact of standard liquids N2 - A guided drop test was performed to achieve a defined and reproducible impact orientation of jerrycans. The drop heights where 50% of the jerrycans experienced a failure from a crack where fluid can escape (50% failure drop height) were compared among jerrycans made of four different materials, in their original state and preconditioned with standard liquids. To analyse the impact of only elevated temperatures, the packages were preconditioned for 21?days at 40°C without the use of chemicals. The 50% failure drop height was compared by using Young's modulus; the notched impact strength (NIS) of specimen cut from plates which were manufactured by compression moulding and the notched tensile impact strength of specimen cut-outs of the jerrycans' side walls. The NIS depends highly on the thermal preconditioning of the plates being manufactured by compression moulding. A trend can be seen that a higher Young's modulus, a higher NIS and a higher notched tensile impact strength result in a higher 50% failure drop height, but the values are spread. The influence of the wall thickness cannot be neglected. The change of the 50% failure drop height in regard to the preconditioning at 40°C with and without nitric acid was compared in terms of their resistance to molecular degradation, density and degree of crystallinity. The conditioning at elevated temperature causes post-crystallization. It was shown that the resistance to molecular degradation determined on pressed plates correlates with the change of the 50% failure drop height after pre-storage with nitric acid. KW - HDPE KW - Drop test KW - Notched impact strength KW - Tensile impact strength KW - Molecular degradation PY - 2014 DO - https://doi.org/10.1002/pts.2042 SN - 0894-3214 VL - 27 IS - 6 SP - 479 EP - 493 PB - Wiley CY - Chichester, UK AN - OPUS4-32640 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Stoppel, Markus A1 - Petrov, Sergej A1 - Hohendorf, Stefan A1 - Goedecke, Thomas T1 - Two application examples of RFID sensor systems - Identification and diagnosis of concrete components and monitoring of dangerous goods transports N2 - The combination of radio-frequency identification (RFID) tags with different types of sensors offers excellent potential for applications with regard to identification, diagnosis, and monitoring. This should be demonstrated by means of two examples of actual developments carried out by the Federal Institute for Materials Research and Testing (BAM). The Identification and diagnosis of concrete components is a major task in the maintenance of critical infrastructure, for instance concrete bridges with heavy traffic volume. A feasibility study investigates the application of RFID sensor systems for this task. The second example reviews the transportation of dangerous goods. Using modern technologies enables promising possibilities to reduce accidents and to avoid non-conformity with transportation regulations. Project results demonstrate an innovative technical solution for monitoring of dangerous goods transports with RFID sensor systems. T2 - 13th IMEKO TC10 Workshop on technical diagnostics CY - Warsaw, Poland DA - 26.04.2014 KW - RFID Sensor systems KW - Monitoring KW - Bridge components KW - Dangerous goods PY - 2014 SN - 978-92-990073-3-4 SP - ID 0019, 111 EP - 115 AN - OPUS4-30990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Jahnke, Wolfgang A1 - Drousch, Björn A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Experimental investigations concerning the sensitivity of the leakproofness test for dangerous goods packagings relating to the leak diameter N2 - The objective of this experiment was to verify that in regards to the leakproofness bubble test for packagings of dangerous goods, a reduction of the air overpressure from 0.2 to 0.1 bar can be compensated for by reducing the water surface tension to a value of approximately 33.2 mN/m by adding a wetting agent. It was experimentally proven that this method will yield the same leak diameters. This is important to avoid irreversible deformations during the leaktesting of intermediate bulk containers (IBCs) while using a test overpressure of 0.2 bar. Bubble test experiments were carried out on artificial borehole-shaped leaks manufactured of two different materials high density polyethylene (HDPE) and stainless steel by ultrashort pulse laser technology and with two different immersion test liquids (deionized water and a 0.1% Lutensol FSA fabric softener active 10 solution). The characteristic diameters of the boreholes investigated were from 11.5 to 30.3 µm in length. KW - Dangerous goods packaging KW - Leakproofness test KW - Bubble test KW - Leak KW - Ultrashort pulse laser PY - 2014 DO - https://doi.org/10.1002/pts.2029 SN - 0894-3214 VL - 27 IS - 4 SP - 327 EP - 339 PB - Wiley CY - Chichester, UK AN - OPUS4-30502 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - A general overview of the UN testing of packagings N2 - The presentation gives an overview about the testing of packagings according to the UN-Recommendations. After an introduction of the worldwide recommendations and the European regulations some packaging tests are presented. Examples of the current work of the UN Subcommittee on packaging testing and some on going research on packaging tests are presented. T2 - ISTA TransPack Forum 2016 CY - Orlando, USA DA - 21.03.2016 KW - Dangerous goods packagings KW - UN recommendations KW - Transport PY - 2016 AN - OPUS4-36897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Seidler, Oliver A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Measurement of helium leakage rates through closures of dangerous goods packagings for the assessment of potentially explosive mixtures in freight containers N2 - The objective was to find out whether an explosive atmosphere can be created in a freight container by gaseous leakage flow of vapour-air-mixture through leaks in the closures of dangerous goods packagings filled with hazardous liquids. Because of high temperatures during intercontinental carriage, there is a gauge pressure in the free vapour phase inside the packagings which can cause a gaseous leakage flow. Two different methods were applied: Helium limit leakage rates for 23 quantitatively important hazardous liquids concerning their lower explosion limit (LEL) were calculated for a worst case transport scenario (Method 1). Helium leakage rates of five closure types of dangerous goods packagings with volumes of approximately 6 l were measured using the pressure technique by accumulation (Method 2). All types of closures of steel packagings were uncritical. The maximum measured leakage was 33% of the limit leakage rate. The leakage rates of screw closures of plastic jerricans can exceed the LEL if there are production-related patterns such as non-concentricity of the closures and flashes on the neck. Especially for plastic packagings it is important to minimize gaseous leakage flow, because an explosive atmosphere can also be reached by permeation of the individual filling substance or by a combination of both effects. For the assessment of potentially explosive mixtures in freight containers, both mass transfer mechanisms have to be taken into account. KW - Gefahrgutverpackungen KW - Dichtheit KW - Leckagerate KW - Überdruck KW - Frachtcontainer KW - Untere Explosionsgrenze KW - Dangerous goods packagings KW - Leakproofness KW - Leakage rate KW - Gauge pressure KW - Leak testing KW - Lower explosion limit PY - 2015 DO - https://doi.org/10.1002/pts.2151 SN - 0894-3214 VL - 28 IS - 11 SP - 959 EP - 985 PB - Wiley & Sons, Ltd. CY - Chichester, UK AN - OPUS4-34967 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bartholmai, Matthias A1 - Stoppel, Markus A1 - Petrov, Sergej A1 - Hohendorf, Stefan A1 - Goedecke, Thomas T1 - Two application examples of RFID sensor systems-identification and diagnosis of concrete components and monitoring of dangerous goods transports N2 - The combination of RFID tags and energy efficient sensors offers promising potential for identification, diagnosis, and monitoring applications - particularly when it comes to objacts, which require continuous observation and which are difficult to access with conventional tools. This paper presents two examples as an outlook for RFID sensor systems in embedded structures and in mobile applications. KW - RFID sensors systems KW - Diagnosis of concrete components KW - Monitoring of dangerous goods PY - 2015 SN - 2221-870X VL - 4 IS - 2 SP - 85 EP - 89 CY - Braunschweig AN - OPUS4-33608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Investigations Concerning the Maximum Filling Degree of Dangerous Goods Packagings for Hazardous Liquids N2 - The dangerous goods regulations UN/ADR 6.1.5.5.4 (a) prescribe a maximum filling degree for determining the test pressure for the hydraulic pressure test by real measurements. The assumption is that the maximum filling degree of the liquid phase is the worst case concerning the gauge pressure. Therefore, the main objective of this study is to investigate the effect of the filling degree on the gauge pressure. Gauge pressure measurements and calculations for different substances were carried out at different filling degrees for a steel drum and a steel jerrican (heating up from 15°C to 55°C). The assumption that the maximum filling degree is the most critical is only valid for relatively rigid packagings: If the relative expansion of the packaging is smaller than the volume increase of the liquid phase due to heating up, the gauge pressure increases with increasing filling degree. But the opposite is true for relatively flexible packagings: If the relative expansion of the packaging exceeds the relative volume expansion of the liquid, the gauge pressure increases for decreasing filling degrees. The current regulations for the hydraulic test pressure determination at a maximum filing degree do not lead to the intended safety level. For a lower level than the maximum filling degree, the prescribed safety factor of 1.5 is not respected. Under transport conditions, it is possible that the inner gauge pressure exceeds the test pressure. This can result in a failure of the packaging. There is a need to reconsider the regulations. KW - Relative expansion KW - Dangerous Goods packagings KW - Filling degree KW - Gauge pressure KW - Overpressure PY - 2017 DO - https://doi.org/10.1002/pts.2209 SN - 0894-3214 VL - 30 IS - 8 SP - 461 EP - 475 PB - Wiley & Sons, Ltd. AN - OPUS4-41341 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilbert, F. A1 - Kuschke, Christian A1 - Goedecke, Thomas A1 - Neumeyer, Tino T1 - Drop testing of the NCS 45 T2 - PATRAM 2007, 15th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Miami, Florida, USA DA - 2007-10-21 KW - Drop tests KW - Scale model PY - 2007 SP - 1 EP - 8 PB - Institute of Nuclear Materials Management AN - OPUS4-18644 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Pettelkau, Alexander A1 - Hohendorf, Stefan A1 - Damm, David A1 - Bartholmai, Matthias A1 - Farahbakhsh, Mahin ED - Goedecke, T. T1 - Securing of dangerous goods transports by RFID-tags with sensor-functionality and integrated database "GEFAHRGUT" information (SIGRID) N2 - The project SIGRID investigates and assesses possibilities to enhance the safety and security of dangerous goods transports through the use of the latest RFID-technology. This technology can be used to greatly enhance the transparency of the supply chain and aid logistics companies in complying with regulations. In the context of SIGRID, customized RFID-Sensor-Tags have been developed that monitor dangerous goods during transport and help to prevent hazards by allowing timely countermeasures. In the case of a dangerous goods accident, the available information about the type, amount and condition of the dangerous goods can be used to accurately inform the relief forces. Unavailable or inaccurate information represents a significant problem for the relief forces. This often leads to a delay in the rescue operation, because relief forces must be aware of the substances involved to protect themselves effectively against them. SIGRID aims to close this information gap. To verify the practicability of the underlying concepts, a demonstrator will be build and tests of realistic scenarios will be conducted. T2 - 17th IAPRI World conference on packaging CY - Tianjin, China DA - 2010-10-12 KW - Dangerous goods KW - Sensors KW - Monitoring KW - RFID KW - WLAN KW - Electronic transport documents PY - 2010 SN - 978-1-935068-36-5 SP - 639 EP - 642 PB - Scientific research publishing AN - OPUS4-22313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Balke, Christian A1 - Probst, Ulrich T1 - Test Facilities on the Open-Air Test Site of the Federal Institute for Materials Research and Testing (BAM) T2 - Dimensions. 06, The International Forum on Transport Packaging CY - San Antonio, Texas, USA DA - 2006-04-18 KW - Test Facilities KW - Fire Tests PY - 2006 SP - 1 EP - 7 AN - OPUS4-18430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - The new drop test and bonfire test facilities on the open air test site of the Federal Institute for Materials Research and Testing (BAM) T2 - IAPRI Symposium 2005 CY - Campinas, Brazil DA - 2005-05-22 PY - 2005 AN - OPUS4-7618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Selective Testing of Plastic Packagings for the Transport of Dangerous Liquids T2 - Worldpak 2002, Michigan State University CY - Lansing, MI, USA DA - 2002-06-23 PY - 2002 AN - OPUS4-3486 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -