TY - CONF A1 - Geburtig, Anja A1 - Goedecke, Thomas A1 - Wachtendorf, Volker ED - Reichert, T. T1 - A new irradiation device for medium scale plastic products N2 - A new irradiation device for the exposure of plastic products is presented. Developed in the BAM division 3.1 "Dangerous Goods Packaging" it can be used for artificial UV irradiation of plastic Containers filled with hazardous liquids. Present regulations and tests only investigate the exposure effects of UV and of media separately, but as the damaging effect is expected to be synergistic for at least some media, a combined test was looked for. A chamber of 60 cm by 60 cm base area and 1 m height gives space for up to 40 cm wide objects. Two fluorescent UV lamp arrays are arranged on opposite walls, separated from the chamber by quartz glass panes. By continuously rotating the exposure object by means of a rotary disc that the object is placed on, spatial irradiation homogeneity is achieved over the exposure duration. The spectral irradiance of the chosen UVA 340 nm lamps gives the best match of global solar radiation in the short wavelength ränge. The close arrangement of the UVA lamps (15 each side) results in 60 W m'2 UV irradiance. Constant temperature is adjusted to typically 40 °C by the control of the fan speed. This temperature is chosen, as it is the required temperature for three week storage of filled polyethylene Containers, for proving Chemical compatibility in the field of dangerous goods. To ensure homogeneity, an interiorfan provides for air circulation. T2 - 7th European weathering symposium - Natural and artificial ageing of polymers CY - Naples, Italy DA - 16.09.2015 KW - Weathering KW - UV irradiation PY - 2015 SN - 978-3-9816286-6-1 N1 - Serientitel: CEEES Publication – Series title: CEEES Publication IS - 17 SP - 91 EP - 96 AN - OPUS4-34353 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Goedecke, Thomas A1 - Kraume, M. ED - Ziegahn, K.-F. T1 - Dichtheitsprüfung unter Verwendung von Prüfgasen N2 - Ziel einer Dichtheitsprüfung ist es entweder, mit einem quantitativen Prüfverfahren integrale Leckageraten zu messen, oder mittels eines lokalisierenden Verfahrens den genauen Leckageort aufzuspüren. In einigen Fällen kann das Betriebsmedium gleichzeitig das Prüfmedium sein, wenn geeignete Sensorik zu Verfügung steht. In anderen Fällen kann dies aus unterschiedlichen Gründen nicht möglich sein. Daher ersetzt man bei der Verwendung von Prüfgasverfahren das Betriebsmedium durch ein spezifisch nachweisbares Prüfgas. Für die Interpretation eines quantitativen Messergebnisses ist es notwendig, die Ist-Leckagerate mit einer zuvor berechneten Grenzleckagerate (maximal zulässige Leckagerate) zu vergleichen. Entspricht das für die Dichtheitsprüfung verwendete Prüfgas nicht dem Betriebsmedium, so ist hierfür eine Umrechnung von Leckageraten notwendig. Es wird ein Überblick über für die Dichtheitsprüfung gängige Prüfgase, deren Eigenschaften sowie Vor- und Nachteile gegeben. Die grundlegenden Prinzipien bei der Umrechnung von Leckageraten (Druckumrechnung; Temperaturumrechnung; Umrechnung der Gasart bzw. des Mediums) werden vorgestellt. T2 - 45. Jahrestagung der Gesellschaft für Umweltsimulation (GUS) CY - Stutensee-Blankenloch, Germany DA - 16. März 2016 KW - Dichtheit KW - Dichtheitsprüfung KW - Prüfgase KW - Dichtheitsprüfverfahren PY - 2016 SN - 978-3-9816286-7-8 SP - 223 EP - 237 AN - OPUS4-36151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Goedecke, Thomas T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept N2 - Abstract: The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. T2 - IAPRI Member Conference 2021 CY - Online meeting DA - 15.06.2021 KW - Bags KW - Dangerous goods packagings KW - Sift-proofness KW - Particles KW - Leak PY - 2021 UR - https://whova.io/email/click/d11d7d6cf1c84dfdc8c12349468fe91c/c9af5bcf002312cff80d9b962d1014e4/ SN - 978-1-63821-160-0 SP - 390 EP - 405 PB - IAPRI CY - East Lansing, Michigan, USA AN - OPUS4-52786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Bethke, John A1 - Jahnke, Wolfgang A1 - Goedecke, Thomas A1 - Kraume, M. T1 - Normale Beförderungsbedingungen beim Gefahrguttransport im Frachtcontainer und ihr Einfluss auf den inneren Überdruck in Gefahrgutverpackungen N2 - Der innere Überdruck, der sich unter Beförderungsbedingungen im freien Dampfraum einer Gefahrgutverpackung bildet, die mit einer gefährlichen Flüssigkeit gefüllt ist, hängt von verschiedenen Faktoren ab: Den spezifischen Stoffeigenschaften des jeweiligen Füllguts, dem Füllgrad, der Nachgiebigkeit der Verpackungsbauart, der Befülltemperatur und der Temperatur bei Beförderungsbedingungen. Zu den normalen Beförderungsbedingungen von befüllten Gefahrgutverpackungen zählt der interkontinentale Transport in Frachtcontainern. Es werden die Ergebnisse einer Klimamessfahrt vorgestellt, die mit einem instrumentierten Frachtcontainer auf der Fahrt von Hamburg nach Singapur und zurück gewonnen wurden. Hierdurch lassen sich durchschnittliche und maximale Beförderungstemperaturen beim interkontinentalen Containertransport ermitteln. Es werden Modellgleichungen vorgestellt, mit denen sich für verschiedene Annahmen der sich einstellende Überdruck in einer Gefahrgutverpackung berechnen lässt. T2 - 44. Jahrestagung der GUS 2015 CY - Stutensee-Blankenloch, Germany DA - 25.03.2015 KW - Gefahrgutverpackungen KW - Frachtcontainer KW - Überdruck PY - 2015 SN - 978-3-9816286-4-7 SP - 179 EP - 193 AN - OPUS4-33072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Menrad, Andreas A1 - Gründer, Klaus-Peter ED - Ziegahn, K.-F. T1 - Vergleich Experiment und numerische Simulation bei der hydraulischen Innendruckprüfung von Kunststoffverpackungen N2 - Beim Transport von aggressiven und gefährlichen Gütern in Kunststoffverpackungen kann es zu unerwünschten Materialveränderungen kommen. Daher erfordert der Einsatz entsprechender Verpackungen eine genaue Kenntnis der verwendeten Werkstoffe. Zum Transport gefährliche Flüssigkeiten sind u.a. Verpackungen aus Kunststoff (z. B. Kanister) erlaubt, wenn diese geprüft und als Gefahrgutverpackungen zugelassen sind. Eine Zulassung gilt nur für die spezifische Verpackungsbauart, welche die notwendigen Bauartprüfungen bestanden hat. Für die Zulassung als Gefahrgutverpackung sind verschiedene experimentelle Prüfungen erforderlich. Dazu zählt die hydraulische Innendruckprüfung, Im Folgenden werden Untersuchungen an extrusionsblasgeformten Kanistern aus Polyethylen hoher Dichte (HDPE) verschiedener Typen vorgestellt. Ziel der Arbeiten war es, einen Eignungsnachweis bezüglich Behälterkonstruktion, Werkstoffeigenschaften und Einsatzbedingungen im Sinne einer sicherheitstechnischen Bauartzulassung zu führen. Außerdem wurden die Einflüsse unterschiedlich schädigender Flüssigkeiten auf die mechanischen Eigenschaften des HDPE-Werkstoffes untersucht. Für die Bauartprüfung zum Nachweis der chemischen Verträglichkeit ist eine sechsmonatige Vorlagerung der Verpackungen mit Originalfüllgut vorgeschrieben. Diese Vorlagerung kann durch den Einsatz spezieller Standardflüssigkeiten auf 21 Tage bei 40° C. verkürzt werden. Die eingesetzten Chemikalien sind die sogenannten Standardflüssigkeiten, die exemplarisch für zahlreiche Stoffe bestimmte Schädigungen auslösen: • Netzmittellösung - spannungsrissauslösend • Essigsäure - spannungsrissauslösend • n-Butylacetat - quellend • Kohlenwasserstoffgemisch (White Spirit) - quellend • Salpetersäure - oxidierend T2 - 43. Jahrestagung der GUS 2014 CY - Stutensee-Blankenloch, Germany DA - 26.03.2014 PY - 2014 SN - 978-3-9816286-0-9 SP - 91 EP - 100 AN - OPUS4-32747 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gründer, Klaus-Peter A1 - Goedecke, Thomas A1 - Kadoke, Daniel A1 - Müller, Karsten A1 - Münzenberger, Sven A1 - Protz, Christian T1 - Prüfung von Gefahrgutumschließungen mit optischen 3D-Messverfahren N2 - Der Beitrag konzentriert sich auf bildgebende Messverfahren, die der dreidimensionalen Bestimmung mechanischer, geometrischer und kinematischer Parameter von Materialien und Bauteilen dienen. Das sind hier insbesondere die Mehrbildfotogrammetrie sowie die Stereomessverfahren, die auf folgenden physikalisch-optischen Grundlagen beruhen: die zeit- und raumveränderliche Projektion von Lichtstreifensystemen, die Bildkorrelation mittels Grauwertmustern und die Verfolgung kontrastreich applizierter Punkttargets. Letztendlich werden aus den gemessenen Punktkoordinaten unterschiedlicher Dichte und Belastungszustände die gewünschten 3D-Parameter abgeleitet. Hierzu gehören z. B. die Oberflächengestalt und deren Verformung, approximierte 3D-Geometrielemente, veränderliche 6DoF-Starrkörperorientierungen, Vektorverschiebungsfelder, Oberflächendehnung, Koordinaten-Zeit-Funktionen, Geschwindigkeit und Beschleunigung. Diese Kenngrößen sind beispielsweise für die Ermittlung mechanischer Werkstoffeigenschaften und -kennwerte bis hin zur Form- und Verformungsmessung von Bauteilen in gezielt quasi-statisch oder dynamisch beanspruchenden Prüfeinrichtungen wichtig. Vorteilhaft für die praktische Anwendung dieser Verfahren ist insbesondere, dass sie berührungslos arbeiten, kombiniert werden können und skalierbar sind z. B. hinsichtlich Messvolumen, Auflösung, Genauigkeit und Koordinatensystemen der zu bestimmenden 3D-Punktkoordinaten an Materialoberflächen bzw. Komponenten. Ausgehend von der Beschreibung der messtechnischen Prinzipien dieser Verfahren sollen zwei Anwendungsbeispiele aus dem Bereich der Gefahrgutbehäl-terprüfung im Rahmen von Bauartzulassungen und der normungsbegleitenden Mate-rialforschung den Stand in der Anwendungspraxis aufzeigen und einen Eindruck hinsichtlich der flexiblen Einsatzmöglichkeiten dieser optischen 3D-Verfahren verdeutlichen. T2 - 4. Fachseminar Optische Prüf- und Messverfahren CY - Hamburg, Germany DA - 17.03.2015 KW - 3D-Messverfahren KW - Verformung KW - Dehnung KW - Bremsbeschleunigung PY - 2015 SP - Vortrag 9, 1 EP - 10 AN - OPUS4-32808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bartholmai, Matthias A1 - Stoppel, Markus A1 - Petrov, Sergej A1 - Hohendorf, Stefan A1 - Goedecke, Thomas T1 - Two application examples of RFID sensor systems - Identification and diagnosis of concrete components and monitoring of dangerous goods transports N2 - The combination of radio-frequency identification (RFID) tags with different types of sensors offers excellent potential for applications with regard to identification, diagnosis, and monitoring. This should be demonstrated by means of two examples of actual developments carried out by the Federal Institute for Materials Research and Testing (BAM). The Identification and diagnosis of concrete components is a major task in the maintenance of critical infrastructure, for instance concrete bridges with heavy traffic volume. A feasibility study investigates the application of RFID sensor systems for this task. The second example reviews the transportation of dangerous goods. Using modern technologies enables promising possibilities to reduce accidents and to avoid non-conformity with transportation regulations. Project results demonstrate an innovative technical solution for monitoring of dangerous goods transports with RFID sensor systems. T2 - 13th IMEKO TC10 Workshop on technical diagnostics CY - Warsaw, Poland DA - 26.04.2014 KW - RFID Sensor systems KW - Monitoring KW - Bridge components KW - Dangerous goods PY - 2014 SN - 978-92-990073-3-4 SP - ID 0019, 111 EP - 115 AN - OPUS4-30990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Wachtendorf, Volker A1 - Goedecke, Thomas ED - Ziegahn, K.-F. T1 - Beanspruchung von HDPE-Verpackungsproben durch UV-Strahlung und Salpetersäure N2 - Transport und Lagerung flüssiger Chemikalien erfolgen häufig in HDPE-Behältern. Diese Behälter müssen Bauteilprüfungen bestehen, die mechanische und chemische Beanspruchungen kombinieren. UV-Beanspruchungen sind kein Bestandteil der Zulassungsprüfungen; gefordert wird aber eine ausreichende UV-Stabilisierung. Inwiefern diese UV-Stabilisierung aber abhängig vom jeweiligen Füllgut ist, soll hier untersucht werden. Vorgestellt wird der experimentelle Aufbau zur kombinierten Beanspruchung von Kunststoffproben durch UV-Strahlung und flüssige Chemikalien. Aufgrund des Gefährdungspotenzials sind dabei entsprechende Sicherheitsvorgaben einzuhalten. Ziel ist die Bewertung synergistischer Effekte beider Einzelbeanspruchungen. Die Wirksamkeit verschiedener Stabilisierungskonzepte bei Beanspruchung durch 55 %-ige Salpetersäure wird beleuchtet. Es wird anschaulich gezeigt, dass nur pigmentiertes HDPE ausreichende Stabilität aufweist. T2 - 43. Jahrestagung der GUS 2014 CY - Stutensee-Blankenloch, Germany DA - 26.03.2014 PY - 2014 SN - 978-3-9816286-0-9 SP - Kap. V 5, 45 EP - 51 AN - OPUS4-31136 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Goedecke, Thomas A1 - Wachtendorf, Volker ED - Sek, M.A. ED - Rouillard, V. ED - Bigger, S.W. T1 - Outdoor weathering of HDPE containers filled with nitric acid N2 - Jerrycans made from three different types of high-density polyethylene (HDPE) were exposed outdoors, for one Berlin summer season. They were filled with a 55 percent nitric acid solution (HN03), pure water, or air, and half of them were protected from sunlight by an UV absorbing canvas. Thus, the separate effects of UV radiation and nitric acid could be compared to the combined impact. Combined impact was mainly affected by decomposition of nitric acid, resulting in presence of reactive nitrogen oxides, increased oxygen partial pressure, and UV radiation energy, simultaneously in vapour phase. To investigate the degradation effects after the outdoor exposure, jerrycans were exposed to a so called hydraulic internal pressure test, similar to an approval test for dangerous goods packaging. After combined impact of UV radiation and nitric acid, internal pressure tests showed very fast failures, whereas after separate impacts no remarkable deteriorations were observed, compared to unaged jerrycans. T2 - 19th IAPRI World conference on packaging CY - Melbourne, Australia DA - 15.06.2014 KW - High-density polyethylene HDPE KW - Nitric acid HNO3 KW - Outdoor exposure KW - UV radiation KW - Weathering PY - 2014 SN - 978-1-86272-699-4 SP - 556 EP - 560 AN - OPUS4-31222 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hilbert, F. A1 - Kuschke, Christian A1 - Goedecke, Thomas A1 - Neumeyer, Tino T1 - Drop testing of the NCS 45 T2 - PATRAM 2007, 15th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Miami, Florida, USA DA - 2007-10-21 KW - Drop tests KW - Scale model PY - 2007 SP - 1 EP - 8 PB - Institute of Nuclear Materials Management AN - OPUS4-18644 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Pettelkau, Alexander A1 - Hohendorf, Stefan A1 - Damm, David A1 - Bartholmai, Matthias A1 - Farahbakhsh, Mahin ED - Goedecke, T. T1 - Securing of dangerous goods transports by RFID-tags with sensor-functionality and integrated database "GEFAHRGUT" information (SIGRID) N2 - The project SIGRID investigates and assesses possibilities to enhance the safety and security of dangerous goods transports through the use of the latest RFID-technology. This technology can be used to greatly enhance the transparency of the supply chain and aid logistics companies in complying with regulations. In the context of SIGRID, customized RFID-Sensor-Tags have been developed that monitor dangerous goods during transport and help to prevent hazards by allowing timely countermeasures. In the case of a dangerous goods accident, the available information about the type, amount and condition of the dangerous goods can be used to accurately inform the relief forces. Unavailable or inaccurate information represents a significant problem for the relief forces. This often leads to a delay in the rescue operation, because relief forces must be aware of the substances involved to protect themselves effectively against them. SIGRID aims to close this information gap. To verify the practicability of the underlying concepts, a demonstrator will be build and tests of realistic scenarios will be conducted. T2 - 17th IAPRI World conference on packaging CY - Tianjin, China DA - 2010-10-12 KW - Dangerous goods KW - Sensors KW - Monitoring KW - RFID KW - WLAN KW - Electronic transport documents PY - 2010 SN - 978-1-935068-36-5 SP - 639 EP - 642 PB - Scientific research publishing AN - OPUS4-22313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Balke, Christian A1 - Probst, Ulrich T1 - Test Facilities on the Open-Air Test Site of the Federal Institute for Materials Research and Testing (BAM) T2 - Dimensions. 06, The International Forum on Transport Packaging CY - San Antonio, Texas, USA DA - 2006-04-18 KW - Test Facilities KW - Fire Tests PY - 2006 SP - 1 EP - 7 AN - OPUS4-18430 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Performance and frequency of leakproofness tests for dangerous goods packagings T2 - 14th IAPRI World Conference on Packaging CY - Lidingo, Sweden DA - 2004-06-13 KW - Leakproofness KW - Dangerous goods KW - Packagings PY - 2004 SP - 1(?) EP - 6(?) AN - OPUS4-4911 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Dichtheitsprüfung bei Bauartprüfung und Fertigung T2 - 6. Gefahrgut-Technik-Tage CY - Berlin, Deutschland DA - 2003-01-01 KW - Dichtheitsprüfung KW - Verpackungen KW - Gefahrgut KW - RID/ADR PY - 2003 VL - 6 SP - 1(?) EP - 5(?) PB - Storck CY - Hamburg AN - OPUS4-2839 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Martin, Carsten T1 - UHF RFID Three-dimensional performance analyzing system T2 - 18th IAPRI World packaging conference CY - San Luis Obispo, CA, USA DA - 2012-06-17 PY - 2012 SN - 978-1-60595-084-6 SP - 41 EP - 47 PB - DEStech Publications, Inc. CY - Lancaster, Pennsylvania, USA AN - OPUS4-29042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Loughery, Zachary Daniel A1 - Menrad, Andreas A1 - Goedecke, Thomas A1 - Goodwin, D. T1 - Positional tolerance of packagings while using guided and unguided compression N2 - The purpose of this article is to demonstrate how the position of a package affects the results in guided and unguided compression tests. Digital image correlation (DIC) shows how localized stresses occur. The positions of the jerricans were moved 1 cm in every direction from the center. The different positions showed how guided and unguided compression applied different loads to thejerrican. Furthermore, the guided and unguided compressions were compared directly using DIC to show how areas of stress concentrations formed and the localized stress changed. In general, when testing the jerricans with unguided compression, the swivel platen tilted backwards because the rear side of the jerrican was not as stiff as the front side with the lid. Guided and unguided compression tests will give different results because the stress concentrations are different. The position of the jerrican in the stacking test has drastic affects on the outcome of the fest. The stresses between the jerrican bottom and stacking plate were analyzed with a sensor mat and compared the guided and unguided loads. Guided and unguided compression tests were performed on jerricans and small and large corrugated fiberboard boxes. The different methods produced different results affecting whether the test was passed or failed. T2 - 26th IAPRI Symposium on packaging CY - Espoo, Finland DA - 10.06.2013 KW - Position KW - Compression KW - Unguided KW - Guided KW - UN stacking test KW - Digital image correlation PY - 2013 SN - 978-951-38-7434-6 SP - 98 EP - 107 AN - OPUS4-28962 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Loughery, Z. A1 - Goedecke, Thomas T1 - Analysis of UN/DOT for the stacking of dangerous goods N2 - The purpose of this paper Is to demonstrate how the different interpretatlons of test Standards can lead to different results. For this study the United Nations (UN) stacking recommendation was examined. The critlcal points in the UN/DOT recommendation studied were guided or unguided compression, and the use of the stacking fixture. Locallzed stresses were analyzed using Digital Imaging Correlation (DIC). The positional tolerance of a packaging was also studied during unguided compression. During unguided compression the posltions of the jerricans were moved 1 cm in each direction from the center. The different positlons showed that was possible for a change in the deflection by 1.3 cm dependlng on the position. The DIC test was used to Show how stress concentrations form and the changes in the locallzed stress with guided and unguided compression. The DIC revealed differences in where and when the areas of higher stress would form. A guided and unguided compression test will give different results and change how stress concentrations form. The Position of the jerrlcan whlle using unguided compression methods will change the overall deflection and the locallzed stresses. These different acceptable methods will produce different results whlch could mean the dlfference between a failure and a package survlving the test. T2 - ISTA TransPack Forum CY - Orlando, FL, USA DA - 25.03.2013 KW - Position KW - Compression KW - Unguided KW - Guided KW - UN stacking test KW - DIC PY - 2013 SP - 1 EP - 13 AN - OPUS4-28092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Umweltsimulation von Verpackungen in der BAM T2 - Symposium "Gefahrgutverpackungen aus Wellpappe" CY - Berlin, Deutschland DA - 2002-10-25 PY - 2002 AN - OPUS4-1775 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Stand der Normung T2 - AK-Prüfstellen der BAM CY - Unterlüß, Deutschland DA - 2002-10-08 PY - 2002 AN - OPUS4-1776 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas T1 - Testing of packagings for dangerous chemicals T2 - Conference on Chemical Safety CY - Portoroz, Slovenia DA - 2002-09-03 PY - 2002 AN - OPUS4-1777 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -