TY - CONF A1 - Kanzler, D. A1 - Rentala, V. K. A1 - Bertovic, Marija A1 - Heckel, Thomas A1 - Tkachenko, Viktoriya A1 - Given, Joseph A1 - Keßler, S. A1 - Dethof, F. A1 - Jüngert, A. A1 - Vrana, J. T1 - Lasst uns mal POD standardisieren! N2 - Seit beinahe 50 Jahren werden Zuverlässigkeitsbewertungen zerstörungsfreier Prüfverfahren erfolgreich in unterschiedlichen Industriebranchen eingesetzt. Dennoch gibt es weiterhin viele Vorbehalte, da die Bewertungsgrundlage nicht standardisiert ist und konkrete Handlungsanweisungen fehlen. Dem gegenüber steht die Anerkennung in der ZfP-Community. Es ist bisher nur Wenigen bekannt, dass dem Wissen über die Zuverlässigkeit eines zerstörungsfreien Prüfverfahren eineSchlüsselfunktion für die ZfP 4.0 zukommt. Im Vortrag wird die Notwendigkeit für eine Norm oder eine Richtlinie zum Thema Zuverlässigkeitsbewertungen aufgezeigt. Es wird darauf eingegangen, warum es bisher (in Deutschland) noch keine Richtlinie gab und gibt und was der:die Anwender:innen aus einer Richtlinie zur Zuverlässigkeitsbewertung von ZfP-Prüfverfahren erwarten kann. Es werden konkrete Schritte und Vorgehensweisen zur Bewertung der Zuverlässigkeit eines Verfahrens aufgezeigt; von der Definition eines Anwendungsfalls, über die Herstellung geeigneter Testkörper bis hin zur Durchführung und Bewertung von Prüfungen unter Einbeziehung von menschlichen Einflüssen. Die Beispiele umfassen sowohl Anwendungen aus dem Bauwesen als auch aus dem Maschinen- und Anlagenbau. Der Vortrag fasst die bisherigen und geplanten Arbeiten in dem WIPANO Projekt „Normung für die probabilistische Bewertung der Zuverlässigkeit für zerstörungsfreie Prüfverfahren“ zusammen. T2 - DGZfP Jahrestagung 2022 CY - Kassel, Germany DA - 23.05.2022 KW - Zuverlässigkeit KW - POD KW - Probability of detection KW - Reliability KW - Human Factors KW - Simulation PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-560113 SP - 1 EP - 10 AN - OPUS4-56011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Das, P. A1 - Chakraborty, Gouri A1 - Roeser, J. A1 - Vogl, S. A1 - Rabeah, J. A1 - Thomas, A. T1 - Integrating Bifunctionality and Chemical Stability in Covalent Organic Frameworks via One-Pot Multicomponent Reactions for Solar-Driven H2O2 Production N2 - Multicomponent reactions (MCRs) can be used to introduce different functionalities into highly stable covalent organic frameworks (COFs). In this work, the irreversible three-component Doebner reaction is utilized to synthesize four chemically stable quinoline-4-carboxylic acid DMCR-COFs (DMCR-1−3 and DMCR-1NH) equipped with an acid−base bifunctionality. These DMCR-COFs show superior photocatalytic H2O2 evolution (one of the most important industrial oxidants) compared to the imine COF analogue (Imine-1). This is achieved with sacrificial oxidants but also in pure water and under an oxygen or air atmosphere. Furthermore, the DMCR-COFs show high photostability, durability, and recyclability. MCR-COFs thus provide a viable materials’ platform for solar to chemical energy conversion. KW - Reactions KW - Bifunctionality KW - Postsynthetic modification KW - Multicomponent PY - 2022 DO - https://doi.org/10.1021/jacs.2c11454 SN - 0002-7863 VL - 145 IS - 5 SP - 2975 EP - 2984 PB - ACS Publications AN - OPUS4-56922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Unger, Wolfgang A1 - Schwarz, F. A1 - Heinrich, Thomas A1 - Kaufmann, J. O. A1 - Lippitz, Andreas A1 - Puttreddy, R. A1 - Rissanen, K. A1 - Schalley, C. A. T1 - Photocontrolled on-surface pseudorotaxane formation with well-ordered macrocycle multilayers N2 - The photoinduced pseudorotaxane formation between a photoresponsive axle and a tetralactam macrocycle was investigated in solution and on glass surfaces with immobilized multilayers of macrocycles. In the course of this reaction, a novel photoswitchable binding station with azobenzene as the photoswitchable unit and diketopiperazine as the binding station was synthesized and studied by NMR and UV/Vis spectroscopy. Glass surfaces have been functionalized with pyridine-terminated SAMs and subsequently withmultilayers of macrocycles through layer-by-layer self assembly. A preferred orientation of the macrocycles could be confirmed by NEXAFS spectroscopy. The photocontrolled Deposition of the axle into the surface-bound macrocycle-multilayers was monitored by UV/Vis spectroscopy and led to an increase of the molecular order, as indicated by more substantial linear dichroism effects in angle-resolved NEXAFS spectra. KW - Well-ordered macrocycle multilayers KW - XPS KW - NEXAFS PY - 2016 DO - https://doi.org/10.1002/chem.201603156 SN - 0947-6539 SN - 1521-3765 VL - 22 IS - 40 SP - 14383 EP - 14389 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-38270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Álvarez-García, J. A1 - Izquierdo-Roca, V. A1 - Pistor, P. A1 - Schmid, Thomas A1 - Pérez-Rodríguez, A. ED - Abou-Ras, D. ED - Kirchartz, T. ED - Rau, U. T1 - Raman spectroscopy on thin films for solar cells N2 - In the present chapter, the capabilities of Raman spectroscopy for the advanced characterisation of thin films for solar cells are reviewed. Raman spectroscopy is an optical, nondestructive technique based on the inelastic scattering of photons with elemental vibrational excitations in the material. The line shape and position of the Raman bands are determined by the crystalline structure and chemical composition of the measured samples, being sensitive to the presence of crystalline defects, impurities and strain. Presence of peaks characteristic of different phases also allows for the identification of secondary phases that are strongly related to the growth and process conditions of the films. All these aspects account for a strong interest in the analysis of the Raman spectra, providing a powerful nondestructive analytical tool for the structural and chemical assessment of the films. In addition, the combination of a Raman spectrometer with an optical microscope also allows for achieving a high spatial resolutions (of below 1 µm) when mapping surfaces and analyzing depth-resolved phase distributions in thin films. The present chapter is divided into four main sections: The two first ones are devoted to a revision of the Fundamentals of Raman spectroscopy (Section 17.2) and Vibrational modes in crystalline materials (Section 17.3). Section 17.4 deals with the main experimental considerations involved in the design and implementation of a Raman scattering setup. This is followed by a detailed description of the application of Raman scattering for the structural and chemico-physical analysis of thin film photovoltaic materials (Section 17.5), with the identification of crystalline structure and secondary phases, evaluation of film crystallinity, analysis of chemical composition of semiconductor alloys, characterisation of nanocrystalline and amorphous layers, stress effects and crystal orientations. This includes the description of corresponding state of the art and recent case examples that illustrate the capabilities of the Raman technique for the advanced characterisation of layers and process monitoring in thin-film photovoltaic technologies. KW - Thin-film solar cells KW - Polycrystalline materials KW - Raman spectroscopy KW - Raman microscopy PY - 2016 UR - http://eu.wiley.com/WileyCDA/WileyTitle/productCd-3527339922.html SN - 978-3-527-33992-1 SP - 469 EP - 499 PB - Wiley & Sons, Ltd. CY - Oxford, UK AN - OPUS4-37451 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kailasam, K. A1 - Mesch, M. B. A1 - Möhlmann, Lennart A1 - Baar, M. A1 - Blechert, S. A1 - Schwarze, M. A1 - Schröder, M. A1 - Schomäcker, R. A1 - Senker, J. A1 - Thomas, A. T1 - Donor–acceptor-type heptazine-based polymer networks for photocatalytic hydrogen evolution N2 - A heptazine-based polymer network (HMP-3) with a donor–acceptor (D–A) structure was prepared and tested as catalyst for photocatalytic hydrogen evolution from water. Compared to other heptazine-based materials, which are typically prepared at high temperatures and have recently received much interest as metal-free photocatalysts, the low-temperature protocol applied here allows the defined introduction of organic functional groups within the polymer backbone. The structure of HMP-3 contains alternating heptazine and benzothiadiazole moieties as electron acceptors connected by aminobenzene bridges as electron donors. The resulting material leads to enhanced hydrogen evolution compared to graphitic carbon nitride materials prepared at high temperatures (>500 8C) most probably because of the stabilization of photogenerated charge carriers in the D–A structure. KW - Photocatalysis KW - Water splitting KW - Water reduction KW - Carbon nitride PY - 2016 DO - https://doi.org/10.1002/ente.201500478 VL - 4 IS - 6 SP - 744 EP - 750 PB - Wiley AN - OPUS4-36915 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ermawati, F. U. A1 - Supardi, Z. A. I. A1 - Suasmoro, S. A1 - Hübert, Thomas T1 - Contribution of Relaxation Effect to the Permittivity of Mg1-xZnxTiO3 Ceramics N2 - This work reported the investigation on the effect of relaxation to the permittivity (epsilon' r ) characteristic of Mg1-x Zn x TiO3 ceramics for x = 0 – 0.5 (MZT0 – MZT0.5) measured from 1 Hz to 330 MHz. Within that frequency range, the relaxation effect that consists of the space charge (SC) and the dipolar (D) polarization mechanisms were identified. The contribution of the D relaxation in MZT0 – MZT0.2 systems extents overall from about 100 Hz to 330 MHz, while that in MZT0.3 – MZT0.5 systems is from 50 kHz to 330 MHz. The remaining frequencies, i.e. from 1 to 90 Hz for MZT0 – MZT0.2 and from 1 Hz to 50 kHz for MZT0.3 – MZT0.5, are attributed to the SC relaxation. The D polarization mechanism provides constant epsilon' r values which vary from (15.4 – 17.0) ± 0.3 throughout the samples. Contribution of the SC polarization mechanism to the characteristic is supported by the simultaneous presence of different content and level of resistivity of the secondary phase of (Mg1-αZnα)2TiO4 in MZT0 – MZT0.2 systems and of (Zn1-αMgα)2TiO4 in MZT0.3 – MZT0.5, along with the presence of the main Mg1-x Zn x TiO3 phase, as a result of the variation of zinc content in the systems. T2 - The 5th International Conference on Advanced Materials Sciences and Technology (ICAMST 2017) CY - Makassar, Indonesia DA - 19.09.2017 KW - Dielectric ceramic KW - dipolar polarization KW - Mg1-xZnxTiO3 KW - permittivity KW - space charge polarization PY - 2018 DO - https://doi.org/10.1088/1757-899X/367/1/012003 SN - 1757-8981 VL - 367 SP - 1 EP - 6 PB - IOP Publishing Ltd AN - OPUS4-45618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohrschneider, A. A1 - Heckel, Thomas A1 - Oelschlägel, T. A1 - Schöll, M. T1 - Innovative Optimierung der Ultraschallprüfung an Radsatzwellen N2 - Betriebsbedingte Belastungen und eventuelle Oberflächenschädigungen einer Radsatzwelle können zu deren Versagen führen. Daher besteht die Notwendigkeit zur vorbeugenden Prüfung mit Hilfe zerstörungsfreier Prüfverfahren. Zurzeit setzt die Deutsche Bahn AG mechanisierte Ultraschall-Prüfsysteme (HPS-Anlagen) bei Radsatzwellen mit Längsbohrung ein. Die Prüfung erfolgt an den im Fahrzeug eingebauten Radsatzwellen. Diese Prüfanlagen nutzen feste Einschallwinkel. Die Nachweisempfindlichkeit liegt bei 2 mm tiefen Vergleichsfehlern für die Querfehlerprüfung. Zur Detektion der Querfehler werden positionsabhängige Blenden im A-Bild eingesetzt. Physikalisch bedingt können aber auch Unregelmäßigkeiten in der Beschichtung, aufgepresste Komponenten und andere Einflüsse zu einer Blendenüberschreitung und somit zu einer Befundung der Radsatzwelle führen. Die konventionelle Prüftechnik erlaubt dabei keine Unterscheidung zwischen diesen sogenannten Scheinanzeigen und den Querfehlern. Ein Radsatztausch mit anschließender Demontage zur Ermittlung der Anzeigenursache ist in diesen Fällen daher derzeit unvermeidlich. Die von der DB Systemtechnik und Partnern untersuchte Phased-Array-Technik mit SAFT-Auswertealgorithmus (Synthetic Aperture Focussing Technique) soll helfen, die UT-Anzeigen besser bewerten zu können und den unnötigen Radsatzwechsel zu vermeiden. Das Ziel des UT-SAFT-Verfahrens ist es, die Tiefenkomponente von Rissen über das Rissspitzensignal zu detektieren und auswertbar zu machen. Durch eine nachgeschaltete UT-SAFT-Analyse soll an befundeten Radsatzwellen nachuntersucht werden, ob die Anzeigen der Reflektorpositionen innerhalb des Wellenvolumens, auf der Grenzfläche oder außerhalb des Wellenvolumens liegen. Es wird erwartet, dass durch die zeitnahe Bestimmung der Anzeigenursache die erforderlichen Radsatzwechsel deutlich reduziert werden. Dadurch ist eine Erhöhung der Fahrzeugverfügbarkeit und eine Kostenreduzierung (Reduzierung des Aufwandes für Radsatzausbau, Radsatztransport, Nachprüfung und Aufarbeitung der Radsätze) erreichbar. T2 - DGZfP-Jahrestagung 2013 CY - Dresden, Germany DA - 06.05.2013 PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-286171 SN - 978-3-940283-49-8 IS - Mi.1.A.3 SP - 1 EP - 10 PB - Deutsche Gesellschaft für zerstörungsfreie Prüfung e.V. (DGZfP) AN - OPUS4-28617 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steiger, Thomas A1 - Pradel, Rita A1 - Bremser, Wolfram A1 - Anchutina, E. A. T1 - COMAR - The international database for certified reference materials N2 - COMAR is the international database for certified reference niaterials. The article presents historical facts, the stnictutre, contents and niaintenance of the database, including the contribution of the data on certifed reference niaterials of Russian producers. KW - COMAR KW - CRM KW - RM KW - Database KW - Certified reference materials PY - 2014 SN - 2077-1177 IS - 1 SP - 71 EP - 80 AN - OPUS4-30943 LA - rus AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Karsten A1 - Favre, A. A1 - Hilbert, F. A1 - Quercetti, Thomas A1 - Neumeyer, Tino A1 - Weingart, Barbara T1 - Prototype testing of a protective structural packaging for 30B cylinder N2 - Three drop test campaigns have been performed with DN 30 Protective Structural Packaging (PSP) developed by DAHER NUCLEAR TECHNOLOGIES GmbH for the transport of natural, enriched and reprocessed uranium hexafluoride (up to 5 wt%) in 30B cylinders. The mechanical prototype testing is intended to demonstrate that the package DN30 complies with regulatory requirements under normal and hypothetical accident conditions of transport (NCT, ACT) relevant to IF, AF and B(U)F packages, respectively. The paper includes the results of the latest test campaign carried out in 2015-2016 at the drop test facility of BAM, Germany with new full scale prototypes of the DN30 PSP and 30B cylinders. Repetition of drop test sequences became necessary after changing to Polyisocyanurate foam as shock absorbing material with variable foam densities. Furthermore, the mechanical behavior of the UF6 content of the 30B cylinder is now simulated by a mixture of cement and steel grid as modified surrogate material; instead of small steel balls. The behavior of this new content simulation is assumed to be more realistic with respect to the properties of real UF6. T2 - PATRAM 2016, 18th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Kobe, Japan DA - 18.09.2016 KW - Drop test KW - Packaging KW - Radioactive material KW - Uranium hexafluoride PY - 2016 SP - Paper 1018, 1 EP - 11 PB - INMM CY - Deerfield, Illinois, USA AN - OPUS4-37568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Graf, Nora A1 - Yegen, E. A1 - Gross, Thomas A1 - Lippitz, Andreas A1 - Weigel, W. A1 - Krakert, S. A1 - Terfort, A. A1 - Unger, Wolfgang T1 - XPS and NEXAFS studies of aliphatic and aromatic amine species on functionalized surfaces N2 - The chemical constitution of functionalized supports is an important parameter that determines their performance in a broad range of applications, e.g. for immobilization of biomolecules. Supports with amino functionalized surfaces are also often used for DNA microarray experiments. However, spectral data which have been reported for surfaces with amino functionalities suffer from some inconsistencies. In this article a detailed XPS (X-ray photoelectron spectroscopy) and NEXAFS (Near edge X-ray absorption fine structure) database for amino functionalized surfaces is presented. Amino-terminated surfaces prepared from aliphatic and aromatic aminosilanes or aminothiols and a field sample are considered. Effects of aging in air and damage by radiation are addressed as well. KW - Near edge X-ray absorption fine structure (NEXAFS) KW - Self-assembled monolayers KW - Amino-functionalized surfaces KW - X-ray photoelectron spectroscopy (XPS) PY - 2009 DO - https://doi.org/10.1016/j.susc.2009.07.029 SN - 0039-6028 VL - 603 IS - 18 SP - 2849 EP - 2860 PB - Elsevier CY - Amsterdam AN - OPUS4-19832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -