TY - CONF A1 - Rauchegger, Christian A1 - Schalau, Bernd A1 - Schmidt, Dirk A1 - Lohse, Volkmar A1 - Schröder, Volkmar A1 - Thévenin, D. T1 - Experimental results from heavy gas dispersions (R134a) N2 - Heavy gases in large quantities are used worldwide in various industries. Past incidents, such as the liquefied gas disaster in Viareggio (2009) have shown that these materials are difficult to handle in a safe manner. According to the German Hazardous Incident Ordinance (StörfallVO 2000 - 12. BIMSchV), plant operators with extended responsibilities must produce a report in which they verify that , in the event of an unintentional gas release, the surrounding area will not be aversely affected. Essential elements of this report are calculations of both the released mass flow and the gas dispersion. Using models such as the VDI guideline 3783 (state of the art in Germany) plant operators are able to predict the characteristics of likely gas dispersions. The presented experimental investigations were carried out at the BAM better understand heavy gas dispersion with high gas concentrations in the air (≥ 1 Vol.-%), as well as concentrations with approximately neutral density characteristics (≤ 3000ppm) in order to test the accuracy of the VDI guideline. The starting point for experimental trials was the heavy gas releases resulting from pipeline, vessel or standard gas bottle leaks, with mass flows of between 20 and 100 g s-1. Investigations on the gas-phase release process focused on the unsteady mass flow associated with releases from standard gas bottles. The experimental results will be used as comparative parameters for future simulations. The goal of these simulations is to develop a model with which calculation of the unsteady mass flow, based on the material characteristics for any gas, is possible. T2 - 7th Global congress on process safety - 2011 Spring meeting CY - Chicago, Illinois, USA DA - 13.03.2011 KW - Heavy gas KW - Gas releases KW - Dispersion KW - Measurement KW - VDI guideline 3783 PY - 2011 SP - 1 EP - 12 AN - OPUS4-23532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schalau, Bernd A1 - Rauchegger, Christian A1 - Schmidt, Dirk A1 - Thévenin, D. T1 - Einfluss der Quellhöhe auf die Ausbreitung schwerer Gase N2 - Im Rahmen von Störfallauswirkungsbetrachtungen werden oft Szenarien betrachtet, in denen Gase freigesetzt werden, die schwerer als Luft sind. Für die Berechnung der Gefährdungsbereiche wird in Deutschland oft die Richtlinie VDI 3783 eingesetzt. Die Methodik zur Bestimmung der Konzentrationsverteilung bei der Freisetzung eines Schwergases ist im Blatt 2 der Richtlinie dargestellt und basiert auf Windkanaluntersuchungen mit verschiedenen Ausbreitungsgebieten. Unter der Zielsetzung, eine möglichst konservative Abschätzung des Gefährdungsbereichs zu erhalten, erfolgte die Gasfreisetzung am Boden. In der Praxis sind aber immer wieder Szenarien zu untersuchen, bei denen die Gasfreisetzung aus Anlagenteilen über Bodenniveau erfolgt. Durch Freilandversuche sollen Anhaltswerte für die Bestimmung einer kritischen Quellhöhe, ab der eine Schwergasausbreitung nicht mehr zu betrachten ist, ermittelt werden. KW - Schwergas KW - VDI-Richtlinie 3783 KW - Gasausbreitung KW - Ausbreitungsmodelle KW - Störfallauswirkungsbetrachtungen PY - 2012 SN - 2191-0073 VL - 2 IS - 10 SP - 35 EP - 37 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-26736 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -