TY - JOUR A1 - Jakobs, Désirée A1 - Mathies, Helena A1 - Abraham, W.-R. A1 - Pritzkow, Wolfgang A1 - Stephan, Ina A1 - Noll, Matthias T1 - Biodegradation of a biocide (Cu-N-cyclohexyldiazenium dioxide) component of a wood preservative by a defined soil bacterial community N2 - The wood protection industry has refined their products from chrome-, copper-, and arsenate-based wood preservatives toward solely copper-based preservatives in combination with organic biocides. One of these is Cu-HDO, containing the chelation product of copper and N-cyclohexyldiazenium dioxide (HDO). In this study, the fate of isotope-labeled (13C) and nonlabeled (12C) Cu-HDO incorporated in wood sawdust mixed with soil was investigated. HDO concentration was monitored by high-pressure liquid chromatography. The total carbon and the δ13C content of respired CO2, as well as of the soil-wood-sawdust mixture, were determined with an elemental analyzer-isotopic ratio mass spectrometer. The concentration of HDO decreased significantly after 105 days of incubation, and after 24 days the 13CO2 concentration respired from soil increased steadily to a maximum after 64 days of incubation. Phospholipid fatty acid-stable isotope probing (PFA-SIP) analysis revealed that the dominant PFAs C19:0d8,9, C18:0, C18:1ω7, C18:2ω6,9, C17:1d7,8, C16:0, and C16:1ω7 were highly enriched in their δ13C content. Moreover, RNA-SIP identified members of the phylum Acidobacteria and the genera Phenylobacterium and Comamonas that were assimilating carbon from HDO exclusively. Cu-HDO as part of a wood preservative effectively decreased fungal wood decay and overall microbial respiration from soil. In turn, a defined bacterial community was stimulated that was able to metabolize HDO completely. KW - 16S rRNA KW - Biocide KW - PLFA KW - Stable isotope probing KW - Soil KW - Wood preservative PY - 2010 DO - https://doi.org/10.1128/AEM.01092-10 SN - 0099-2240 VL - 76 IS - 24 SP - 8076 EP - 8083 PB - American Society for Microbiology CY - Washington, DC [u.a.] AN - OPUS4-22688 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hübert, Thomas A1 - Tiebe, Carlo A1 - Stephan, Ina T1 - Detection of fungal infestations of wood by ion mobility spectrometry N2 - During their growth on wood many fungi produce characteristic volatile organic compounds as secondary metabolites. These microbial volatile organic compounds (MVOCs) can be used as indicators of fungal growth even when such growth is concealed. In order to investigate the formation of these volatile metabolites on building materials, specimens of pine sapwood on agar media colonized by the dry-rot fungus Serpula lacrymans and a mixture of six moulds were examined. MVOCs from this fungal growth were studied over a period of up to half a year by ion mobility spectrometry (IMS) headspace analysis using a sensitive, portable IMS mini-device. The IMS headspace spectra from the growing fungal specimens obtained during this time span are differed from non-incubated wood specimens and indicate the presence of a mixture of MVOCs. The composition and amount of volatile metabolites of the fungi changed during cultivation. This was confirmed by a principal component analysis (PCA). Identification of different MVOCs in the headspace according to drift time and the mobility of ionized gaseous species in reference to GC-MS investigations were proposed. It was concluded that IMS can be used as a rapid and sensitive on-site method to indicate actively growing fungi concealed within wood. KW - Dry rot KW - Serpula lacrymans KW - Moulds KW - Concealed infestation KW - Ion mobility spectrometry KW - Fungal detection PY - 2011 DO - https://doi.org/10.1016/j.ibiod.2011.03.008 SN - 0964-8305 VL - 65 IS - 5 SP - 675 EP - 681 PB - Elsevier CY - Barking AN - OPUS4-23994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Harrer, Andrea A1 - Nies, Daniel A1 - Pulz, Robert A1 - Kervalishvili, Guram N. A1 - Rehmer, Birgit A1 - Stephan, Ina A1 - Maierhofer, Christiane T1 - Untersuchung von Transport- und Schädigungsprozessen mittels lokal angeregter aktiver Thermografie N2 - Als schnelles und berührungsfreies Messverfahren kann die aktive Thermografie auch in-situ eingesetzt werden, d.h. während sich Materialeigenschaften aufgrund direkter oder indirekter Einflüsse ändern. In diesem Beitrag stellen wir die Methode der aktiven Thermografie mittels lokaler Laseranregung und deren Anwendung auf unterschiedliche Materialien wie Holz, Sandstein und Keramiken vor. Mit der im Folgenden beschriebenen Methode wurden der Einfluss von Holzschutzmitteln auf die thermischen Eigenschaften von Holz, Feuchtetransportprozesse in Naturstein sowie die thermischen Eigenschaften von Siliziumcarbid unterschiedlicher Dicke und von Hochtemperaturkeramiken nach zunehmender thermischer Belastung in-situ untersucht. Experimentelle Ergebnisse werden u. a. im Vergleich mit numerischen Simulationen vorgestellt. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P36) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21888 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina T1 - Anforderungen an die Wirksamkeitsbewertung von Materialschutzmitteln T2 - BAuA-Fachtagung Zulassung/Registrierung von Biozid-Produkten, Schwerpunkt; "Schutzmittel (Hauptgruppe 2 ohne PA 8)" CY - Dortmund, Germany DA - 2011-10-10 PY - 2011 AN - OPUS4-25305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina A1 - Nimz, H. A1 - Peek, R.-D. T1 - Detoxification of salt-impregnated wood by organic acids in a pulping process N2 - The paper descibes a novel method to detoxify pine wood (Pinus silvestris L.) treated with CCB-, CCF- CC-, and Cu-HDO-type salt preservatives. In the process of biological detoxification organic acids produced by strains of Antrodia vaillantii and other brown rot fungi are used for the dissolution of the previously fixed inorganic compounds. These findings are the basis for applying an acid pulping process (FORMACELL) developed by Nimz and Schone (1992) at the BFH, Hamburg, to detoxify salt impregnated wood waste with a mixture of acetic and formic acid. First results achieved with wood chips from treated poles after approximately 20 years of service life show that the obtained pulp contains less than 100 ppm of Cr and Cu. The pulp properties were neither influenced by the Cr and Cu ions nor by the age of the poles. The extracted quantities of Cr and Cu remain with the lignin whereas the acids are evaporated and recycled in the pulping process. T2 - 24th Annual meeting of the International Research Group on Wood Preservation CY - Orlando, FL, USA DA - 1993-05-16 KW - Detoxification KW - Wood waste KW - Disposal KW - Acidification KW - Pulping KW - CCB KW - CC KW - CCF KW - CuHDO PY - 1993 UR - http://www.irg-wp.com/irgdocs/details.aspx?id=d44a2d82-2c63-4a45-bfc3-193e23215b4f N1 - Serientitel: IRG WP – Series title: IRG WP IS - 93-50012 SP - 1 EP - 11 PB - IRG CY - Stockholm AN - OPUS4-4447 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina T1 - ISO 846 - Revision of Part C: Restance to Bacteria T2 - Meeting of International Biodeterioration Research Group CY - Prague, Czech Republic DA - 2013-04-16 PY - 2013 AN - OPUS4-28378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Bremser, Wolfram A1 - Stephan, Ina A1 - Klein-Hartwig, Karin A1 - Rasenko, Tatjana A1 - Koch, Matthias T1 - T-2 and HT-2 toxins in oat flakes: development of a certified reference material N2 - Trichothecene mycotoxins, with T-2 and HT-2 toxins being the main representatives of the type A subgroup, are naturally and worldwide occurring contaminants frequently found in grain-based food and feed. Due to the high consumption of these products and the potential health risk associated herewith, concerns about the safety and quality of food and feed have increased over the last decades at both governmental and consumer levels. Since it is not possible to avoid their occurrence, tremendous efforts have been performed to identify and monitor mycotoxins in food and feed to make their consumption safe. However, suitable certified reference materials (CRMs) intended for quality assurance and quality control purposes are still lacking for many mycotoxin-matrix combinations. Therefore, in the framework of a European Reference Material (ERM®) project, the first CRM for T-2 and HT-2 toxin in ground oat flakes (ERM®-BC720) was developed according to the requirements of ISO Guide 35. The whole process of ERM®-BC720 development, including sample preparation, homogeneity and stability studies and value assignment, is presented. The assignment of the certified mass fractions was based upon an in-house study using high-performance liquid chromatography isotope-dilution tandem mass spectrometry. Simultaneously, an interlaboratory comparison study involving 24 expert laboratories was conducted in order to support the in-house certification study. The certified values and their corresponding expanded uncertainties (k=2) for both T-2 and HT-2 toxin in ERM®-BC720, traceable to the international system of units, are (82±4) µg kg-1 and (81±4) µg kg-1, respectively. KW - Type A trichothecenes KW - Fusarium toxins KW - Isotope-dilution mass spectrometry KW - Food analysis KW - European Reference Material KW - Quality assurance PY - 2015 DO - https://doi.org/10.1007/s00216-014-8251-4 SN - 1618-2642 SN - 1618-2650 VL - 407 IS - 11 SP - 2997 EP - 3007 PB - Springer CY - Berlin AN - OPUS4-33073 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Naumann, Annette A1 - Seefeldt, Henrik A1 - Stephan, Ina A1 - Braun, Ulrike A1 - Noll, Matthias T1 - Material resistance of flame retarded wood-plastic composites against fire and fungal decay N2 - Flame retarded wood-plastic composites (WPCs) should allow safe application in areas of fire risk. Halogen-free flame retardants can contain high amounts of nitrogen, phosphorus or sulphur, which may serve as nutrition source for wood degrading fungi and accelerate wood decay. Therefore, the material resistance of WPCs with each of four flame retardants against both fire or fungal decay was examined in comparison to WPC without flame retardant. Expandable graphite showed the best performance against fire in cone calorimetry and radiant panel testing. Two ammonium polyphosphates and a third nitrogen-containing flame retardant were not as effective. Contrary to the possibility that flame retardants might enhance fungal decay of WPC, the opposite effect occurred in case of the wood-degrading fungi Trametes versicolor and Coniophora puteana according to determination of mass loss and decrease of bending modulus of elasticity. Only the surface mould Alternaria alternata slightly increased the degradation of WPCs with nitrogen-containing flame retardants compared to WPC without flame retardant according to mass loss data and FTIR-ATR analyses. Finally, WPC including expandable graphite as flame retardant was effective against both fire and fungal decay. KW - Wood-plastic composite (WPC) KW - Flame retardants KW - Fire behaviour KW - Fungal decay KW - Fourier transform infrared - attenuated total reflexion (FTIR-ATR) spectroscopy KW - Microscopy PY - 2012 DO - https://doi.org/10.1016/j.polymdegradstab.2012.03.031 SN - 0141-3910 SN - 1873-2321 VL - 97 IS - 7 SP - 1189 EP - 1196 PB - Applied Science Publ. CY - London AN - OPUS4-26058 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina T1 - Measuring soil respiration as a new approach to describe the interaction between wood (treated and untreated) and microbiologically active soil T2 - International Research Group on Wood Preservation CY - Tromsø, Norway DA - 2006-06-18 PY - 2006 AN - OPUS4-14187 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wachtendorf, Volker A1 - Schulz, Ulrich A1 - Geburtig, Anja A1 - Stephan, Ina T1 - Mildew growth on automotive coatings influencing the results of outdoor weathering N2 - As the results of a 14 weeks outdoor exposure of a series of automotive coatings in South Florida, the panels were found to be overgrown with an almost closed layer of mildew. Pinholes remained as permanent surface damage after removing the mildew mycelium. The extent of the damage differed in dependence of the kind of the coating. By tracing the images and profiles of the coating surfaces systematically over all phases of weathering and the subsequent cleaning procedure, a connection between formation of pinholes and mildew growth could be found. Outdoor weathering tests in other regions of Florida as well as in Europe and Australia showed that pinholes caused by mildew attack could also be found in all other locations, but always to a lower extent than in South Florida. The standardised mildew tests EN ISO 846 and MIL-STD 810F for laboratory exposure failed to reproduce the formation of pinholes. KW - Coatings KW - Mildew KW - Weathering KW - South Florida PY - 2012 DO - https://doi.org/10.1002/maco.201005784 SN - 0947-5117 SN - 1521-4176 VL - 63 IS - 2 SP - 140 EP - 147 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-25467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bandow, N. A1 - Aitken, M. D. A1 - Geburtig, Anja A1 - Kalbe, Ute A1 - Piechotta, Christian A1 - Schoknecht, Ute A1 - Simon, Franz-Georg A1 - Stephan, Ina T1 - Using Environmental Simulations to Test the Release of Hazardous Substances from Polymer-Based Products: Are Realism and Pragmatism Mutually Exclusive Objectives? N2 - The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented. KW - Environmental simulations KW - Polymer-based products KW - Artificial weathering KW - Degradation KW - Leaching KW - Soil contact PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509310 DO - https://doi.org/10.3390/ma13122709 SN - 1996-1944 VL - 13 IS - 12 SP - Paper 2709, 22 PB - MDPI CY - Basel, Switzerland AN - OPUS4-50931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Gorbushina, Anna A1 - Plarre, Rüdiger A1 - Stephan, Ina T1 - Umweltsimulation an der BAM – Grundlegende Ansätze mit Beispielen aus der natürlichen Umwelt N2 - Drei grundlegend verschiedene Ansätze für Umweltsimulation werden an Beispielen illustriert: (i) Ganzheitlicher Ansatz - Nachstellen von Umweltmilieus im Labor Ziel ist hier das Nachstellen von (kombinierten) Umweltbedingungen im Labor; die Umweltparameter werden mit all ihren Wechselwirkungen aufgebracht. Hauptnutzen ist eine gegenüber der natürlichen Beanspruchung erhöhte Reproduzierbarkeit der Umweltbedingungen. Hat man sein Laborsetup entwickelt, ist es auf verschiedene Materialien anwendbar. Unter solchen Laborbedingungen ermittelte Lebensdauern sind dabei nicht auf die typischerweise sehr variablen Real-Umweltbedingungen übertragbar. (ii) Parametrisierter Ansatz - Ermittlung einzelner Materialempfindlichkeiten Hierbei werden im Labor die Wirkungen separater Umweltparameter auf Materialien nachgestellt. Für eine solche Separation der Einflussfaktoren ist insbesondere die Aufschlüsselung möglicher Wechselwirkungen der Umwelt-parameter (z.B. Mikroklima an bestrahlten Oberflächen) erforderlich. Einzelne (meist Alterungs-) Empfindlichkeiten können qualitativ nachgewiesen werden oder sogar – als Beanspruchungs-Wirkungs-Funktionen – quantifiziert werden, was einen wesentlichen Schritt in Richtung der Digitalisierung der Material¬prüfung darstellt. Insbesondere ist dann auch eine Lebensdauer-vorhersage für vorgegebene Zeitreihen der Beanspruchungs¬parameter umsetzbar. (iii) Rückwirkungen auf die Umwelt Umweltbeanspruchungen können zur Freisetzung von Schadstoffen in die Umwelt führen. Durch die Nachstellung kritischer, aber realitätsnaher Einsatzszenarien kann die Menge an freigesetzten Substanzen abgeschätzt werden. Egal, welcher Ansatz verfolgt wird – ein Vergleich mit der oder einer Real-beanspruchung ist unerlässlich, ebenso wie die Messdatenaufzeichnung (data logging) aller potenziell relevanten Beanspruchungsparameter während dieser Realbeanspruchung. Obwohl die naturnahe Umwelt – sowohl in der BAM als auch bei der GUS – gegenüber der technischen Umwelt eher untergeordnet auftritt, werden zur Illustration Beispiele aus der naturnahen Umwelt verwendet. T2 - 50. Jahrestagung der GUS CY - Online meeting DA - 23.03.2022 KW - Umweltsimulation PY - 2022 SN - 978-3-9818507-7-2 SP - 79 EP - 89 AN - OPUS4-55015 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulz, Ulrich A1 - Stephan, Ina A1 - Wachtendorf, Volker A1 - Geburtig, Anja A1 - Slomko, R. A1 - Petzold, I. T1 - Mildew-caused Damage on Automotive Coatings T2 - European Coatings Conference "Novel Biocide Technology II" CY - Berlin, Germany DA - 2005-02-24 KW - Mildew KW - Fungi KW - Mould KW - Weathering KW - Coating KW - Pinholes KW - Damage PY - 2005 SP - 17 pages PB - Vincentz CY - Hannover AN - OPUS4-11223 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina T1 - Mould growth on automotive coatings influencing the results of outdoor weathering T2 - Smart and Functional Coatings CY - Turin, Italy DA - 2013-09-26 PY - 2013 AN - OPUS4-29249 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -