TY - JOUR A1 - Kubeil, M. A1 - Zarschler, K. A1 - Pietzsch, J. A1 - Kraus, Werner A1 - Comba, P. A1 - Stephan, H. T1 - Copper(II) cyclam complexes with N-propionic acid pendant arms N2 - Four cyclam (1,4,8,11-tetraazacyclotetradecane) ligands with different numbers of N-substituted propionic acid groups lead to pentacoordinate copper(II) complexes that adopt trans-I configurations (4+1 geometry), that is, the complexes have a dx2-y2 ground state with significant rhombic distortion. From the structural data (X-ray diffraction analysis and electron paramagnetic resonance, UV/Vis and IR spectroscopy), as the number of secondary amine groups of the macrocyclic ring substituted with propionic acid groups increases, the distortion from square pyramidal to trigonal bipyramidal increases, and this is expected to lead to relatively low complex stabilities. This is confirmed by in vitro studies with superoxide dismutase (SOD) and human serum challenge experiments as well as by biodistribution data with the 64Cu-labelled complexes. The 64Cu-labelled complexes with cyclam monopropionic and dipropionic acid show high in vitro and in vivo stabilities, and the latter provides a comparable biodistribution profile to that of 64Cu–TETA (TETA = 1,4,8,11-tetraazacyclotetradecane-1,4,8,11-tetraacetic acid). KW - Copper KW - Chelates KW - Macrocyclic ligands KW - Radiopharmaceuticals KW - Diagnostic and therapy KW - Copper complexes PY - 2015 DO - https://doi.org/10.1002/ejic.201500510 SN - 1434-1948 SN - 1099-0682 IS - 24 SP - 4013 EP - 4023 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-33993 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pirskawetz, Stephan A1 - Trattnig, H. A1 - Boehm, C. ED - Rogge, Andreas ED - Meng, Birgit T1 - Spanndrahtbrüche und ihr digitaler akustischer Zwilling N2 - Die Planung eines Monitorings von Spanndrahtbrüchen mit Schallemissionsanalyse erfordert viel Erfahrung und setzt eine akustische Analyse der Spannbetonstruktur voraus. Eine akustische Simulation der Struktur unterstützt die Optimierung der Sensoranordnung und erhöht die Zuverlässigkeit der Drahtbrucherkennung durch die Fusion von Simulations- und Messergebnissen in einer Datenbank. Künftig können Baulastträger und Monitoringanbieter von standardisierten – FAIR-en – akustischen Daten profitieren. T2 - 11. Jahrestagung des DAfStb mit 63. Forschungskolloquium der BAM Green Intelligent Building CY - Berlin, Germany DA - 16.10.2024 KW - Spanndrahtbruch KW - Digitaler akustischer Zwilling PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-613038 SN - 978-3-9818564-7-7 SP - 224 EP - 229 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-61303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Budnik, J. A1 - Betz, T. A1 - Fromm, A. A1 - Gerdes, A. A1 - Gerlach, J. A1 - Götz, M. A1 - Hintzen, W. A1 - Hüttl, R. A1 - Kämpfer, W. A1 - König, A. A1 - Kühner, S. A1 - Lohaus, L. A1 - Meng, Birgit A1 - Neumann, T. A1 - Patzer, M. A1 - Schaab, A. A1 - Schauerte, J. A1 - Siebert, B. A1 - Stephan, D. A1 - Tebbe, H. A1 - Wagner, J.-P. ED - Siebert, B. T1 - Chemischer Angriff auf Betonbauwerke - Bewertung des Angriffsgrads und geeignete Schutzprinzipien N2 - In verschiedenen Bereichen des Betonbaus ist Beton einem chemischen Angriff von außen ausgesetzt, der die Dauerhaftigkeit des betreffenden Bauteils bzw. des gesamten Bauwerks beeinträchtigen kann. Für einen chemischen Angriff in natürlichen Böden und Grundwässern bestehen normative Vorgaben in DIN 4030-1 [R10] bzw. DIN 1045-2 [R19], um den Angriffsgrad anhand der Art und Konzentration der angreifenden Stoffe in Expositionsklassen XA1 (schwach angreifend) bis XA3 (stark angreifend) einzustufen. Hinsichtlich weiterer maßgeblicher Einflussfaktoren wird an dieser Stelle nicht näher differenziert, ob und inwieweit die Regelungen für Böden und Grundwässer auch auf andere Bereiche mit chemischem Angriff auf Beton zu übertragen sind, ist stets im Einzelfall zu überprüfen. Ebenfalls sind die zu treffenden Maßnahmen über die Vorgaben der DIN EN 206-1/DIN 1045-2 [R19] hinaus anwendungsspezifisch festzulegen. Der Hauptausschuss Baustofftechnik (HABT) des DBV hat daher den Arbeitskreis "Chemischer Angriff auf Beton" beauftragt, dieses Merkblatt zu erarbeiten, das Hilfestellung bei der Bewertung einer projektspezifischen chemischen Angriffssituation auf Beton sowie bei der Planung und Ausführung von Schutzprinzipien leisten soll. KW - Beton KW - Betonangriff KW - Dauerhaftigkeit KW - Säureangriff KW - Sulfatangriff PY - 2014 SP - 1 EP - 101 PB - Eigenverlag Deutscher Beton- und Bautechnik-Verein e. V. CY - Berlin AN - OPUS4-44662 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Budnik, J. A1 - Betz, T. A1 - Brameshuber, W. A1 - Fromm, A. A1 - Gerdes, A. A1 - Gerlach, J. A1 - Götz, M. A1 - Hart, R. A1 - Heese, C. A1 - Hintzen, W. A1 - Hüttl, R. A1 - Kämpfer, W. A1 - König, A. A1 - Kühner, S. A1 - Lohaus, L. A1 - Meng, Birgit A1 - Neumann, T. A1 - Remus, R. A1 - Schaab, A. A1 - Schäffel, P. A1 - Schauerte, J. A1 - Schönborn, A. A1 - Siebert, B. A1 - Stephan, D. A1 - Tebbe, H. A1 - Wagner, J.-P. ED - Siebert, B. T1 - Chemischer Angriff auf Beton - Empfehlungen zur Prüfung und Bewertung N2 - ln den letzten Jahren wurden diverse Prüfverfahren und Methoden entwickelt, um die Leistungsfähigkeit von Beton bzw. Bindemittel hinsichtlich des Widerstands gegenüber betonaggressiven Einwirkungen beurteilen zu können. Ein wesentliches Ziel von Prüfverfahren zur Beurteilung der Dauerhaftigkeit von Baustoffen ist, die im Laufe der Nutzungsdauer zu erwartenden Einwirkungen auf den Baustoff realitätsnah abzubilden. Dazu sind die Prüfparameter auf die im jeweiligen Anwendungsbereich vorherrschenden Umgebungs- und Randbedingungen anzupassen. Daneben sind auch die Bewertungskriterien individuell unter Berücksichtigung der im Einzelfall geforderten Nutzungsdauer eines Bauwerks festzulegen. Eine systematische Zuordnung von adäquaten Prüfverfahren bzw. Prüfparametem und Bewertungskriterien für die verschiedenen Anwendungsbereiche im Betonbau, in denen betonaggressive Einwirkungen auftreten, ist mit Ausnahme von Einzelfällen bislang nicht vorhanden. Daneben stellt sich in der Praxis immer wieder das Problem, das Angriffspotenzial der Umgebung eines Bauwerks (prüftechnisch) zu erfassen und zu bewerten. Der Hauptausschuss Baustofftechnik des DBV hat daher den Arbeitskreis „Chemischer Angriff auf Beton“ beauftragt, dieses Merkblatt zu erarbeiten, das auf Basis von einschlägigen Erfahrungen der Baupraxis und wissenschaftlichen Erkenntnissen Grundsätze und bewährte Methoden zur Beurteilung der Einwirkungs- und Widerstandsseite beim chemischen Angriff auf Beton aufzeigt und diesbezüglich Hinweise für verschiedene Anwendungsbereiche im Betonbau liefert. KW - Beton KW - Betonangriff KW - Dauerhaftigkeit KW - Säureangriff PY - 2017 SP - 1 EP - 65 PB - Eigenverlag Deutscher Beton- und Bautechnik-Verein e. V. CY - Berlin AN - OPUS4-44663 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tian, H. A1 - Voigt, Marieke A1 - Lehmann, C. A1 - Meng, Birgit A1 - Stephan, D. ED - Middendorf, B. ED - Fehling, E. T1 - Composition and microstructure stability of cement compound under cyclic hydrothermal condition N2 - There have been many researches focused on the performance improvement of ultra-high performance concrete (UHPC) by autoclaving treatment. The goal of autoclaving is to increase the pozzolanic reaction, and to densify the cement stone and the transition zone which originates from the incorporation of supplementary cementitious materials (SCMs), such as silica fume, fly ash and blast furnace slag. Due to the superior properties, UHPC can also be utilized under high mechanical load and aggressive condition, for example, the fabrication of water tanks for thermal storage which is of great significance for saving energy and reducing CO2 emission. It is known that mineral stability of the hydration products of an inorganic binder is highly related to the temperature and pressure of the environment. A certain stable composition at room temperature, however, may undergo a phase transformation at high temperature and the performance decrease under this severe condition will generally be more severe. In this way, the rationale behind this deterioration under long-term hydrothermal condition involving many cycles and long duration has to be clarified, and then appropriate optimizing methods will be performed in order to obtain a kind of construction with high durability under aggressive environment. For this purpose, different types and amounts of SCMs are introduced into the standard mixture of UHPC and the phase compositions after autoclaving at 200 °C and 15.5 bar are determined by combined X-ray diffraction and scanning electron microscope. Mercury intrusion porosimeter is used to characterise the microstructure of the samples. In order to establish the relationship between microstructure and macroscopic properties, compressive and flexural strength are also investigated. T2 - HiPerMat 2020 CY - Kassel, Germany DA - 11.03.2020 KW - Hydrothermal treatment KW - UHPC KW - Composition PY - 2020 SN - 978-3-7376-0828-2 VL - 23 SP - 87 EP - 88 PB - Kassel University Press CY - Kassel AN - OPUS4-52375 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stephan, H. A1 - Walther, M. A1 - Fähnemann, S. A1 - Ceroni, P. A1 - Molloy, J.K. A1 - Bergamini, G. A1 - Heisig, F. A1 - Müller, C.E. A1 - Kraus, Werner A1 - Comba, P. T1 - Bispidines for dual imaging N2 - The efficient transformation of the hexadentate bispidinol 1 into carbamate derivatives yields functional bispidines enabling convenient functionalization for targeted imaging. The BODIPY-substituted bispidine 3 combines a coordination site for metal ions, such as radioactive 64CuII, with a fluorescent unit. Product 3 was thoroughly characterized by standard analytical methods, single crystal X-ray diffraction, radiolabeling, and photophysical analysis. The luminescence of ligand 3 was found to be strongly dependent on metal ion coordination: CuII quenches the BODIPY fluorescence, whereas NiII and ZnII ions do not affect it. It follows that, in imaging applications with the positron emitter 64CuII, residues of its origin from enriched 64Ni and the decay products 64NiII and 64ZnII, efficiently restore the fluorescence of the ligand. This allows for monitoring of the emitted radiation as well as the fluorescence signal. The stability of the 64CuII–3 complex is investigated by transmetalation experiments with ZnII and NiII, using fluorescence and radioactivity detection, and the results confirm the high stability of 64CuII–3. In addition, metal complexes of ligand 3 with the lanthanide ions TbIII, EuIII, and NdIII are shown to exhibit emission of the BODIPY ligand and the lanthanide ion, thus enabling dual emission detection. KW - Bispidines KW - Chelates KW - Imaging agents KW - Lanthanides KW - Radiolabeling KW - Nuclear medical application KW - Radioactive labelling KW - SPECT PY - 2014 DO - https://doi.org/10.1002/chem.201404086 SN - 0947-6539 SN - 1521-3765 VL - 20 IS - 51 SP - 17011 EP - 17018 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-32320 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Juran, S. A1 - Walther, M. A1 - Stephan, H. A1 - Bergmann, R. A1 - Steinbach, J. A1 - Kraus, Werner A1 - Emmerling, Franziska A1 - Comba, P. T1 - Hexadentate Bispidine derivatives as versatile bifunctional chelate agents for Copper(II) radioisotopes PY - 2009 DO - https://doi.org/10.1021/bc800461e SN - 1043-1802 SN - 1520-4812 VL - 20 IS - 2 SP - 347 EP - 359 CY - Washington, DC AN - OPUS4-19068 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kraus, Werner A1 - Stephan, H. A1 - Röllich, A. A1 - Matejka, Z. A1 - Reck, Günter T1 - K6H2[TiW11CoO40].13H2O, with a monotitanoundecatungstocobaltate(II) anion N2 - Hexapotassium dihydrogen monotitanoundeca­tungsto­cobalt­ate(II) trideca­hydrate, K6H2[TiW11CoO40]·13H2O, crystallizes from aqueous solution in the cubic space group P 3m. The structure was refined as an inversion twin. The [TiW11CoO40]8- anion has a Keggin structure with one W-atom site occupied by titanium and a central tetra­hedral CoO4 group. PY - 2005 DO - https://doi.org/10.1107/S1600536805005180 SN - 1600-5368 VL - 61 IS - 3 SP - i35 EP - i37 PB - Munksgaard CY - Copenhagen AN - OPUS4-7043 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kraus, Werner A1 - Stephan, H. A1 - Reck, Günter T1 - Käfigstrukturen für den Einschluss von Pertechnetat und Perrhenat PY - 2004 SN - 0930-486X VL - 21 SP - 70 PB - Oldenbourg CY - München AN - OPUS4-3489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gloede, J. A1 - Ozegowski, S. A1 - Keitel, I. A1 - Buttge, K. A1 - Gruner, M. A1 - Costisella, B. A1 - Pritzkow, Wolfgang A1 - Stephan, H. A1 - Bartoschek, M. T1 - Zweifach und dreifach intramolekular verbrückte p-tert-Butylcalix[8]aren-triphosphate - Synthese, Struktur und Stereochemie [1] N2 - The phosphorylation of p-tert-butylcalix[8]arene (1) with phosphorus pentachloride and hydrolysis gives intramolecular bridging tert-butylcalix[8]arene triphosphates. The reactivity (esterification, dehydratisation, complexation), the structure (nmr and x-ray), and the stereochemical behaviour of the phosphates will be discussed. KW - Calix[8]arenes KW - Phosphates KW - Heterocycles KW - Stereochemistry PY - 2006 DO - https://doi.org/10.1002/zaac.200500203 SN - 0044-2313 SN - 1521-3749 SN - 0372-7874 SN - 0863-1786 SN - 0863-1778 VL - 632 IS - 1 SP - 123 EP - 132 PB - Wiley-VCH CY - Weinheim AN - OPUS4-13201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Rethmeier, Michael A1 - Weber, Gert A1 - Gaul, H. A1 - Brauser, Stephan T1 - Untersuchungen zur Ermüdungsfestigkeit von Widerstandspunktschweißverbindungen aus hochfesten Mehrphasenstählen unter Berücksichtigung fertigungsspezifischer Einflüsse N2 - Unter den rauen Bedingungen in der Automobilrohkarosseriefertigung lassen sich schweißbedingte Imperfektionen wie Risse beim Widerstandspunktschweißen von hochfesten Stählen nicht immer vermeiden. Für die sichere Auslegung ist die Kenntnis über den Einfluss solcher Risse von erheblicher Bedeutung. PY - 2011 SN - 978-3-942541-04-6 VL - P 802 SP - 1 EP - 86 PB - Verlag und Vertriebsgesellschaft mbH CY - Düsseldorf AN - OPUS4-25450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ruedrich, J. A1 - Rieffel, Y. A1 - Pirskawetz, Stephan A1 - Alpermann, H. A1 - Joksch, U. A1 - Gengnagel, C. A1 - Weise, Frank A1 - Plagge, R. A1 - Zhao, J. A1 - Siegesmund, S. T1 - Development and assessment of protective winter covers for marble statuaries of the Schlossbrücke, Berlin (Germany) N2 - The present study documents the results of an inter-disciplinary model project that was planned with the aim of developing an innovative winter covering system for marble statuaries located on the Schlossbru¨cke (Berlin). Such a system would need to fulfil the various requirements for structural stability, aesthetics, climate and practical use. This applied research represents the first complex scientific study of the sustainability of a winter covering system. The study is characterised by the use of complex scientific instruments such as special laboratory analysis and numerical simulation tools. The interaction between the environment and the artefacts in connection with the innovative winter covering structures were studied by extensive climatic monitoring. KW - Marble sculptures KW - Marble weathering KW - Winter cover KW - Climate data KW - Numerical simulations PY - 2011 DO - https://doi.org/10.1007/s12665-010-0765-2 SN - 1866-6280 SN - 1866-6299 VL - 63 IS - 7-8 SP - 1823 EP - 1848 PB - Springer CY - Berlin; Heidelberg AN - OPUS4-22363 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -