TY - CONF A1 - Küttenbaum, Stefan A1 - Maack, Stefan T1 - Nutzung von ZfP-Daten bei der Nachrechnung von Spannbetonbrücken N2 - Der Vortrag umfasst methodische Ansätze sowie Fallbeispiele zur Nachrechnung von Betonbrücken unter Einbeziehung von gütebewerteten, zerstörungsfreien Inspektionsergebnissen. T2 - Seminar "Zerstörungsfreie Prüfung" der Technischen Universität München CY - Online meeting DA - 09.07.2020 KW - ZfPStatik KW - Ultraschall KW - Radar KW - Nachrechnung PY - 2020 AN - OPUS4-50999 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Maack, Stefan T1 - ZfP Statik – Zuverlässigkeitsbewertung von Bestandsbauwerken mit ZfP-Ergebnissen N2 - Messen heißt wissen. Dieses Wissen spiegelt die Realität wider und soll den Statiker eines bestehenden Bauwerkes bei der Entscheidungsfindung über die Sicherheit und Zuverlässigkeit der Konstruktion unterstützen. Gegenüber dem Neubauentwurf können bei der Bewertung von bestehender Bausubstanz Sicherheitsreserven genutzt werden, da Unsicherheiten, die beim Bau auftreten können, besser bekannt oder nicht mehr vorhanden sind. Können solche Unsicherheiten genauer bewertet werden, z. B. durch die Feststellung der genauen Lage der Spannglieder bei einer Spannbetonbrücke, so können Sicherheitsbeiwerte reduziert werden, ohne dass es dabei zu Auswirkungen auf das normativ festgelegte Zuverlässigkeitsniveau kommt. Mittlerweile sind Prüfmethoden an Bauwerken wirtschaftlich einsetzbar und auch so leistungsfähig, dass die für die Tragfähigkeit und Gebrauchstauglichkeit wesentlichen Parameter identifiziert werden können. Ein wesentlicher Punkt ist hierbei die Integration derartiger Messergebnisse in Rechenmodelle, die für die Nachrechnung des Bauwerks verwendet werden. Dies können sowohl semiprobabilistische Rechenmodelle als auch vollprobabilistische Modelle sein. Bei semiprobabilistischen Methoden können aus den Messergebnissen Teilsicherheitsbeiwerte berechnet und abgeleitet werden, die dann in den bekannten Nachweisformaten gemäß den Eurocodes und der Nachrechnungsrichtlinie berücksichtigt werden. Bei vollprobabilistischen Nachweisen können die Messdaten in Form von Verteilungsdichtefunktionen mit gemessenen Variationskoeffizienten direkt in das Rechenmodell eingehen. T2 - Abteilungsseminar der Abteilung 8 CY - Online meeting DA - 28.04.2021 KW - Bestandsbauwerke KW - Zuverlässigkeitsbewertung KW - Nachrechnung KW - Zerstörungsfreie Prüfung KW - Messunsicherheit PY - 2021 AN - OPUS4-52531 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Taffe, A. A1 - Braml, T. A1 - Maack, Stefan T1 - Non-Destructive Testing: A valuable source of information for reliability assessments N2 - The reassessment of bridges is becoming increasingly important. The basic requirement for analyses of structural safety is reliable knowledge about individual structures. This paper introduces the new approach to evaluate the quality of measured data gained from non-destructive testing (NDT) to provide reliable, objective, and relevant information about existing bridges. The purpose is to relate this validated knowledge to probabilistic analyses. Bridging the gap between NDT and numerical reassessments indicates reduced numerical uncertainties and residual service time extensions. This paper deals with an application of this approach using measurement data collected by ultrasonic technique at a prestressed concrete bridge. T2 - IABSE Symposium 2019 CY - Guimarães, Portugal DA - 27.03.2019 KW - NDT KW - Measurement KW - Structural safety KW - Concrete bridges KW - Eexisting structures PY - 2019 AN - OPUS4-47714 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Maack, Stefan T1 - Zerstörungsfreie Prüfung im Bauwesen - eine zuverlässige Informationsquelle N2 - Inhalt der Präsentation: - Einführung in das Prinzip der Laufzeitmessung - Vorteile bei der Anwendung von Volumenverfahren an Spannbetonbrücken - Möglichkeiten zur Beurteilung der Leistungsfähigkeit von ZfP-Verfahren und zur Verwendung der Messergebnisse in probabilistischen Nachweisen von Bestandstragwerken T2 - Fachtagung ZfPStatik 2020 CY - Munich, Germany DA - 18.02.2020 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Messunsicherheit KW - Nachrechnung KW - Beurteilung von Bestandstragwerken PY - 2020 AN - OPUS4-50417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Taffe, A. A1 - Braml, T. A1 - Maack, Stefan T1 - Reliability assessment of existing bridges based on NDT-results N2 - The non-destructive testing methods available for civil engineering (NDT-CE) enable the measurements of quantitative parameters, which realistically describe the characteristics of existing buildings. In the past, methods for quality evaluation and concepts for validation expanded into NDT-CE to improve the objectivity of measured data. Thereby, a metrological foundation was developed to collect statistically sound and structurally relevant information about the inner construction of structures without destructive interventions. More recently, the demand for recalculations of structural safety was identified. This paper summarizes a basic research study on structural analyses of bridges in combination with NDT. The aim is to use measurement data of nondestructive testing methods as stochastic quantities in static calculations. Therefore, a methodical interface between the guide to the expression of uncertainty in measurement and probabilistic approximation procedures (e.g. FORM) has been proven to be suitable. The motivation is to relate the scientific approach of the structural analysis with real information coming from existing structures and not with those found in the literature. A case study about the probabilistic bending proof of a reinforced concrete bridge with statistically verified data from ultrasonic measurements shows that the measuring results fulfil the requirements concerning precision, trueness, objectivity and reliability. T2 - 5th ICCRRR 2018 - International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 19.11.2018 KW - NDT KW - Concrete KW - Stochastic model KW - Reassessment KW - Reliability PY - 2018 AN - OPUS4-46768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Braml, T. A1 - Maack, Stefan T1 - Refining stochastic models for the reassessment of bridges using NDT-methods N2 - Increasing requirements on the infrastructure caused by more and heavier traffic coincide with both the aging and the progressive degradation of bridge constructions. These exemplary issues lead to a non-negligible need for reassessments of existing bridges. Compared to the new building design, safety reserves can be used in the evaluation of such existing structures, since uncertainties that may arise during the design, construction and previous Service time are better known or no longer present. Uncertainties can be evaiuated more precisely by measurements. In the meantime, the application of advanced NDT-methods on concrete structures have become so capable, that crucial structure Parameters like certain material properties or geometrical dimensions can be quantified without significant destructive interventions. The measured data can be explicitly incorporated into the probabilistic computation models used for the bridge reassessment in form of random variables. Therewith, a previously insufficient model can be refined to achieve a higher level of approximation. This contribution emphasises two fundamental steps of the measured data based probabilistic reassessment: The sensitivity analyses to identify the cruciai Parameters and the needed accuracy of the related information as well as the comparison with expected uncertainties of non-destructively measured Parameters. T2 - 17th International Probabilistic Workshop CY - Edinburgh, UK DA - 11.09.2019 KW - Measurement KW - Reassessment KW - Structural safety KW - Concrete bridges KW - NDT PY - 2019 AN - OPUS4-48999 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Maack, Stefan A1 - Taffe, A. T1 - Structural safety referring to ultrasound on concrete bridges N2 - Measuring means knowing. The structural engineer’s Knowledge about structures is vitally important for the assessment of their structural safety. This contribution shows, how non-destructive testing methods can be used to collect valuable Information about existing structures. This value is expressed in this paper by the usability in probabilistic assessments and thus by the reliability of the information. The development of non-destructive testing methods in civil-engineering allows the realistic measurement and visualization of inner constructions of concrete components with a minimum of destructive interventions. The evaluation of the quality of measurement data is of fundamental importance for quantitative measurements in order to ensure the objectivity of testing and evaluation and to assess the reliability of the knowledge acquired. Both systematic and random deviations must be identified, quantified and taken into account to obtain statistically sound data. The Focus of this contribution is on the methodical path, how displayed measurement data can be processed into reliable knowledge. It is not about developing assessment methods but about providing necessary knowledge to increase their operational usability. T2 - 16th International Probabilistic Workshop CY - Vienna, Austria DA - 12.09.2018 KW - NDT KW - Reassessment KW - Probabilistic KW - Non-destructive testing in civil engineering KW - Existing bridges PY - 2018 AN - OPUS4-46144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Braml, T. A1 - Taffe, A. A1 - Maack, Stefan T1 - From uncertainty in measurement to certainty in bridge assessment N2 - In this contribution, an approach is outlined to process non-destructively gath-ered measurement data in a comparable way in order to include the measured information in probabilistic reliability assessments of existing structures. An es-sential part is the calculation of measurement uncertainties. The effect of incor-porating evaluated NDT-results is demonstrated by means of a prestressed con-crete bridge and GPR measurements conducted on this bridge as a case-study. The bridge is assessed regarding SLS Decompression using the NDT-results. T2 - 1st Conference of the European Association on Quality Control of Bridges and Structures – EUROSTRUCT2021 CY - Padova, Italy DA - 29.08.2021 KW - Reliability KW - Assessment KW - Existing structures KW - NDT KW - Concrete PY - 2021 AN - OPUS4-53173 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan T1 - Validierung von ZfP-Verfahren für die Nachrechnung von Brücken N2 - Vortrag über die Bewertung der Zuverlässigkeit von bestehenden Brücken mit gezielt am Bauwerk erhobenen ZfP-Ergebnissen im Rahmen der Verleihung des DGZfP-Nachwuchspreises 2021 auf der Jahrestagung der DGZfP. T2 - DGZfP-Jahrestagung 2021 CY - Online meeting DA - 10.05.2021 KW - Zuverlässigkeit KW - Messunsicherheit KW - Reliability assessment KW - Existing structures PY - 2021 AN - OPUS4-52630 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan T1 - Relevant, abgesichert, vergleichbar – ZfP-Ergebnisse bei der Zuverlässigkeitsbewertung von Bauwerken N2 - Die Nachrechnung, d. h. die Zuverlässigkeitsbewertung von bestehenden Brücken, ist aufgrund der alternden Infrastruktur und sich verändernden Anforderungen an die Bauwerke eine fortwährend große Herausforderung in Wissenschaft, Praxis und Standardisierung. Ein wesentlicher Vorteil bei der Nachrechnung besteht gegenüber dem Neubauentwurf in der Möglichkeit, Informationen über den tatsächlichen Zustand der Bauwerke zu erheben – im Idealfall ohne wesentliche destruktive Eingriffe in die Bausubstanz. Deren Verwendung bei der Zuverlässigkeitsanalyse dient der Zuschärfung von Berechnungsmodellen und ermöglicht realitätsnähere Bauwerksbeurteilungen. Die Einbeziehung von Messdaten bei der Zuverlässigkeitsbewertung setzt jedoch voraus, dass die Qualität der gemessenen Informationen bekannt und deren Vergleichbarkeit sichergestellt ist. Darüber hinaus sollte die Relevanz der messbaren Informationen beziffert werden, um wirtschaftliche Inspektionen am Bauwerk gezielt durchführen zu können. In diesem Beitrag wird am Beispiel von Ultraschall- und Radarmessungen an einer Spannbetonbrücke gezeigt, wie ZfP-Ergebnisse bei der Zuverlässigkeitsbewertung von Bestandsbauwerken mit probabilistischen Methoden genutzt werden können. Betrachtet werden innere geometrische Abmessungen wie die Lage der Bewehrung oder von Spanngliedern. Die Relevanz der messbaren Informationen wird anhand von Sensitivitätsanalysen beziffert. Messunsicherheitsbetrachtungen dienen der Bezifferung der Qualität der gemessenen Informationen und der Gewährleistung deren Vergleichbarkeit. Abschließend werden die möglichen Auswirkungen der Berücksichtigung von ZfP-Ergebnissen auf die Bauwerkszuverlässigkeit in einem Nachweis einer Spannbetonbrücke gemäß Eurocode demonstriert. T2 - Fachtagung Bauwerksdiagnose 2024 CY - Berlin, Germany DA - 29.02.2024 KW - ZfPStatik KW - Nachrechnung KW - Zuverlässigkeitsbewertung KW - Bestandsbauwerke KW - Betonbrücke PY - 2024 AN - OPUS4-59585 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Kainz, C. A1 - Braml, T. T1 - Reliability reassessment of bridges with geometrical NDT results N2 - This presentation summarizes recent developments within the scope of the national pre-standardization project “ZfPStatik”, which aims to prepare a guideline about NDT-supported structural analyses. The focus is on the purposeful and explicit utilization of geometrical tendon and reinforcement bar positions measured on-site in reliability analysis — shown by means of a prestressed concrete bridge as case study. T2 - 13th German Japanese Bridge Symposium CY - Osaka, Japan DA - 28.08.2023 KW - Existing structures KW - Probabilistic methods KW - Data-supported assessment PY - 2023 AN - OPUS4-58268 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan T1 - Guideline on NDT-supported reliability assessment of existing structures N2 - The presentation summarizes the idea and the methodology of the ZfPStatik project and gives insight into three case studies, showing how non-destructive testing results can be utilized beneficially in the recalculation of existing prestressed concrete and reinforced concrete bridges. T2 - 2nd Conference of the European Association on Quality Control of Bridges and Structures – EUROSTRUCT2023 CY - Vienna, Austria DA - 26.09.2023 KW - Reliability KW - Assessment KW - Existing structures KW - Non-destructive testing PY - 2023 AN - OPUS4-58485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Maack, Stefan A1 - Aßmann, Norman A1 - Feistkorn, S. T1 - Ways to unlock the potential of NDT for the reliability assessment of existing structures N2 - Vortrag über die Berechnung von Messunsicherheiten und die POD-Analyse zur Aufbereitung von ZfP-Ergebnissen für die Zuverlässigkeitsbewertung bestehender Bauwerke. T2 - 8th International Workshop on Reliability of NDT/NDE @ SPIE Smart Structures + NDE CY - Los Angeles, CA, USA DA - 12.03.2023 KW - Probability of Detection KW - Measurement uncertainty KW - Reliability assessment PY - 2023 AN - OPUS4-57192 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Taffe, A. T1 - Imaging of results in NDT-CE: Strength and limitations in the use of Radar vs. Ultrasonic Echo N2 - Presentation on behalf of the co-author specified in BAM-Publica. Study on capabilities of volume methods (GPR, Ultrasonic Echo) regarding lateral and depth localisation of reinforcement and tendons in concrete components. Varied boundary conditions: spacing and diameter of both the near surface rebars of the mesh, and the reflectors of interest, as well as component thickness and concrete cover. Please find corresponding references on slide 2. T2 - 6th International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR2022) CY - Cape Town, South Africa DA - 03.10.2022 KW - Reinforcement KW - Tendon duct KW - Concrete KW - NDT KW - Localisation PY - 2022 AN - OPUS4-55987 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Maack, Stefan A1 - Taffe, A. T1 - On the accuracy of tendon localization in concrete using ultrasound N2 - Approaches to the development of a (GUM-) measurement model for the calculation of measurement uncertainties in the localization of tendons in concrete structures using the ultrasonic echo method including demonstration were presented. T2 - 6th International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2022) CY - Cape Town, South Africa DA - 03.10.2022 KW - Reliability KW - Measurement Uncertainty KW - Non-Destructive Testing KW - Existing Concrete Structures PY - 2022 AN - OPUS4-55991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Maack, Stefan A1 - Taffe, A. A1 - Braml, T. T1 - On the Treatment of Measurement Uncertainty in Stochastic Modeling N2 - Measurement uncertainty calculations in stochastic moddeling of time-independent, NDT-based random variables to be used in refined assessment of existing structures T2 - International Probabilistic Workshop 2022 (IPW2022) CY - Stellenbosch, South Africa DA - 08.09.2022 KW - Reliability KW - Assessment KW - Existing structures KW - Measurement uncertainty PY - 2022 AN - OPUS4-55657 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Küttenbaum, Stefan A1 - Maack, Stefan A1 - Taffe, A. A1 - Braml, T. T1 - Towards NDT supported decisions on the reliability of existing bridges N2 - 1) Concept for the NDT-supported assessment of existing structures 2) Demonstration: Shear force analysis of a prestressed concrete bridge T2 - ICOSSAR 2021-2022,13th International Conference on Structural Safety & Reliability CY - Online meeting DA - 13.09.2022 KW - Nachrechnung KW - Zuverlässigkeitsbewertung KW - Messunsicherheit KW - Querkraftnachweis PY - 2022 AN - OPUS4-55796 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -