TY - CONF A1 - Sklorz, Christian A1 - Otremba, Frank A1 - Balke, Christian T1 - BLEVE - Sicherheit von Tanks unter auslegungsüberschreitenden Belastungen T2 - 11. Technische Informationsveranstaltung der VPI CY - Potsdam, Germany DA - 2013-06-20 PY - 2013 AN - OPUS4-28719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sklorz, Christian A1 - Otremba, Frank A1 - Balke, Christian T1 - Fire testing T2 - SOURCE TERM CHARACTERIZATION OF THE CONSEQUENCES OF STORAGE TANK AGRESSIONS CY - Brussels, Belgium DA - 2013-06-04 PY - 2013 AN - OPUS4-28666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sklorz, Christian A1 - Otremba, Frank A1 - Balke, Christian T1 - BLEVE performance of fire protection coating systems on dangerous goods tanks in a test fire N2 - How can the risk of a BLEVE be reduced? That is the main question based on different research projects. In various large scale fire tests fire protection coating systems were used of different manufacturers. The degree of the coating as well as the layer thickness and the processing were varied. These experimental configurations were partly tested with and without pressure relief valve. The pressure relief valves were not protected again the thermal Load from the test fire. The ambition is to find a minimum of the thickness from the fire protection coating witch delay a BLEVE up to 90 minutes. Here are given the most interested configurations of tanks in fire and a description of the test-rigs. KW - BLEVE KW - Fire protection coating KW - Isolation KW - Test rigs KW - Large scale fire test PY - 2013 DO - https://doi.org/10.12720/ijmse.1.2.90-93 SN - 2315-4527 VL - 1 IS - 2 SP - 90 EP - 93 PB - Engineering and technology publishing AN - OPUS4-30124 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sklorz, Christian A1 - Otremba, Frank A1 - Balke, Christian T1 - Beyond desingn loading conditions of tanks for dangerous goods T2 - Fire Scince CY - Berlin, Germany DA - 2013-11-29 PY - 2013 AN - OPUS4-30102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sklorz, Christian A1 - Otremba, Frank A1 - Balke, Christian T1 - BLEVE Performance of fire protection coating systems on dangerous goods tanks in a test fire T2 - International Conference on Petroleum and Petrochemical Engineering (ICPPE 2014) CY - Macau, China DA - 2014-01-24 PY - 2014 AN - OPUS4-30104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sklorz, Christian T1 - Fire testing N2 - The phenomenon whereby the tank fails in a fire is described as a BLEVE. BLEVE Stands for boiling liquid expanding vapour explosion. This describes the sudden Vaporisation of a boiling, liquid under pressure followed by ignition. BLEVE are very complex phenomena which are influenced by a number of factors. T2 - Source term characterization of the consequences of storage tank aggressions (STO-AVT-VKI Lecture series 2012/13 - AVT 219) CY - Brussels, Belgium DA - 04.06.2013 KW - BLEVE KW - Storage tank KW - Fire protection coating PY - 2013 N1 - Serientitel: STO-AVT-VKI Lecture Series 2012/13 – Series title: STO-AVT-VKI Lecture Series 2012/13 SP - 1 EP - 11 AN - OPUS4-28927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Iancu, O.T. A1 - Erhard, Anton A1 - Otremba, Frank A1 - Sklorz, Christian T1 - Consistency between analytical and finite element predictions for safety of cylindrical pressure vessels at higher temperatures N2 - Die Vorhersage der Beanspruchung bei plastischem Versagen von zylindrischen Druckbehältern wird häufig mittels Finite Elemente Berechnungen durchgeführt. Die Berechnung der zulässigen Beanspruchung erfordert ein elastisch-plastisches Werkstoffmodell und die Berücksichtigung von nichtlinearen geometrischen Effekten. Das plastische Versagen verursacht eine gesamte Strukturinstabilität und kann nicht direkt aus der Finite Elemente Analyse bestimmt werden. In dem vorliegenden Beitrag wird die Beanspruchung für plastisches Versagen eines zylindrischen Druckbehälters mittels eines analytischen Verfahrens basierend auf einem linear elastischen ideal-plastischen Materialmodell bestimmt. Wenn Plastizität auftritt, wird zum einen der Werkstoff als inkompressibel und zum anderen der Tensor der plastischen Dehnungen als parallel zum Spannungsabweichungstensor angenommen. In diesem Fall kann die Spannungs-Dehnungs-Beziehung von Henkel angewendet werden, um den Druck zu berechnen, bei dem plastisches Fließen und Versagen eintritt. Die analytischen Ergebnisse werden von den Finite Elemente Berechnungen vollkommen bestätigt. KW - Materials testing KW - FEM KW - Plastic instability KW - Limit load analysis KW - Pressure vessel KW - Analytical solution PY - 2014 SN - 0025-5300 VL - 56 IS - 4 SP - 274 EP - 278 PB - Hanser CY - München AN - OPUS4-30722 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konersmann, Rainer A1 - Sklorz, Christian T1 - Zur Früherkennung technischer Risiken N2 - Der Begriff 'Risiko' erzeugt selten positive Emotionen. Risiken mögen wir eigentlich nicht, denn sie können manchmal existenzgefährdend sein. Deshalb möchten wir Risiken so früh wie möglich entdecken. Das rechtzeitige Erkennen riskanter Entwicklungen und Zustände, so die Theorie, ermöglicht es, die 'Stellschrauben' für die Konsequenz und die Eintrittswahrscheinlichkeit, d. h. den beiden Faktoren der Risikoformel, so weit zurückzudrehen, bis uns das verbleibende Restrisiko akzeptabel erscheint. Es besteht aber der begründete Verdacht, dass es manchmal sehr schwierig ist, risikoträchtigen Entwicklungen rechtzeitig entgegen zu wirken, zumal sich Fehlerquellen oft nicht sofort zeigen. Es könnte aber auch sein, dass die Ursachenforschung – aufgrund wirtschaftlicher Erwägungen – nicht konsequent genug betrieben wird. So kann es passieren, dass einzelne Schadensereignisse als unerheblich bewertet werden und kostenintensive Nachbesserungen entbehrlich erscheinen. Der folgende Beitrag beschreibt einige Beispiele zu diesem Thema und versucht eine Antwort darauf zu finden, warum die Früherkennung technischer Risiken bislang so wenig erfolgreich war. KW - Risiko KW - Früherkennung KW - Vorsorgeprinzip PY - 2014 SN - 2191-0073 VL - 4 IS - 6 SP - 45 EP - 50 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-30868 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank A1 - Sklorz, Christian A1 - Simon, Sylvio T1 - A new tank design for Hazmat N2 - Initial studies have shown pre-deformed honeycomb structure pressure vessels to have comparable burst pressure to straight steel vessels. It was shown that honeycomp structured tanks have a higher energy absorption than straight steel tanks. Future studies will investigate optimization of the deformed plate, to determine if increased payloads or a reduced wall thickness can be achieved. T2 - ASME 2016 International Mechanical Engineering Congress and Exposition (ICME 2016) CY - Phoenix, Arizona, USA DA - 11.11.2016 KW - Hazmat KW - Tankdesign KW - Honeycomb structure PY - 2016 AN - OPUS4-38399 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sklorz, Christian A1 - Otremba, Frank A1 - Reich, Franziska T1 - Limit load analysis of pressurized containers N2 - Limit load analysis is a well known method to calculate the allowable design pressure of container components. A limit load of a pressurized container is achieved, when the stress of a wall and the flow stress are equal. In the following paper the transferability of limit load analysis from small scale tank containers up to large scale containers (railway tank) are investigated. Finite element calculations are carried out and compared with experimental results. It can be concluded that the limit load analysis works very well. Furthermore, the yield strength of the material should be used as flow stress. T2 - IMECE 2014 - ASME International mechanical engineering congress and exposition CY - Montreal, Quebec, Canada DA - 2014-11-14 PY - 2014 SN - 978-0-7918-4958-3 SP - Paper 36334, 1 EP - 5 AN - OPUS4-32316 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -