TY - JOUR A1 - Karrasch, Stefan A1 - Simon, M. A1 - Herbig, Britta A1 - Langner, Jeanette A1 - Seeger, Stefan A1 - Kronseder, A. A1 - Peters, S. A1 - Dietrich-Gümperlein, G. A1 - Schierl, R. A1 - Nowak, D. A1 - Jörres, R.A. ED - Nazaroff, William T1 - Health effects of laser printer emissions: a controlled exposure study N2 - Ultrafine particles emitted from laser printers are suspected to elicit adverse health effects. We performed 75-minute exposures to emissions of laser printing devices (LPDs) in a standardized, randomized, cross- over manner in 23 healthy subjects, 14 mild, stable asthmatics, and 15 persons reporting symptoms associated with LPD emissions. Low-level exposures (LLE) ranged at the particle background (3000 cm−3) and High-level exposures (HLE) at 100 000 cm−3. Examinations before and after exp sures included spirometry, body plethysmography, transfer factors for CO and NO (TLCO, TLNO), bronchial and alveolar NO, cytokines in serum and nasal secretions (IL-1β, IL-5, IL-6, IL-8, GM-CSF, IFNγ, TNFα), serum ECP, and IgE. Across all participants, no statistically significant changes occurred for lung mechanics and NO. There was a decrease in volume-related TLNO that was more pronounced in HLE, but the difference to LLE was not significant. ECP and IgE increased in the same way after exposures. Nasal IL-6 showed a higher increase after LLE. There was no coherent pattern regarding the responses in the participant subgroups or single sets of variables. In conclusion, the experimental acute responses to short but very high-level LPD exposures were small and did not indicate clinically relevant effects compared to low particle number concentrations. KW - Emission KW - Exposure KW - Laser printer KW - Lung function KW - Respiratory health KW - Ultrafine particles PY - 2017 DO - https://doi.org/10.1111/ina.12366 SN - 1600-0668 VL - 27 IS - 4 SP - 753 EP - 765 PB - John Wiley & Sons Ltd. CY - London AN - OPUS4-42593 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan A1 - Böcker, Wolfgang D. G. A1 - Bücker, Michael A1 - Seeger, Stefan A1 - Unger, Brita ED - Specht, K. T1 - Development of wood-inorganic composites with enhanced properties and environmental stability T2 - 4th International Wood and Natural Fibre Composites Symposium CY - Kassel, Germany DA - 2002-04-10 PY - 2002 VL - 4 SP - 50-1-50-6 CY - Kassel AN - OPUS4-1365 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hieronymus, Hartmut A1 - Mitropetros, Constantinos A1 - Bender, Josef A1 - Seeger, Hansjörg A1 - Seifert, Stefan A1 - Wendler, Reinhold A1 - Plewinsky, Bodo T1 - Heterogene Explosionen PY - 2002 SN - 1434-9728 SN - 1436-4948 SN - 0372-2457 SN - 0376-1185 VL - 43 IS - 3 SP - 39 EP - 45 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-1309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mitropetros, Constantinos A1 - Fomine, Pavel A1 - Seeger, Hansjörg A1 - Bender, Josef A1 - Seifert, Stefan A1 - Steinbach, J. A1 - Plewinsky, B. A1 - Hieronymus, Hartmut T1 - Shock induced bubble explosion in a monodispersed organic liquid T2 - Plasma Physics and Short Time Scale Physics Spring Meeting CY - Aachen, Germany DA - 2003-03-24 PY - 2003 SN - 0420-0195 SN - 0372-5448 SN - 0343-9216 VL - 38-4 IS - K 5.9 SP - 22 CY - Bad Honnef AN - OPUS4-2743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mitropetros, Constantinos A1 - Fomine, Pavel A1 - Seeger, Hansjörg A1 - Bender, Josef A1 - Seifert, Stefan A1 - Steinbach, J. A1 - Plewinsky, B. A1 - Hieronymus, Hartmut T1 - Cavitation after shock wave propagation inside a chemically active organic bubbly liquid T2 - Plasma Physics and Short Time Scale Physics Spring Meeting CY - Aachen, Germany DA - 2003-03-24 PY - 2003 SN - 0420-0195 SN - 0372-5448 SN - 0343-9216 VL - 38-4 IS - K 5.10 SP - 22 CY - Bad Honnef AN - OPUS4-2744 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mitropetros, Constantinos A1 - Fomine, Pavel A1 - Seeger, Hansjörg A1 - Bender, Josef A1 - Seifert, Stefan A1 - Steinbach, J. A1 - Plewinsky, B. A1 - Hieronymus, Hartmut T1 - Detonation Wave Impact on the Surface of a Chemically Active Organic Bubbly Liquid T2 - Plasma Physics and Short Time Scale Physics Spring Meeting CY - Aachen, Germany DA - 2003-03-24 PY - 2003 SN - 0420-0195 SN - 0372-5448 SN - 0343-9216 VL - 38-4 IS - K 5.8 SP - 22 CY - Bad Honnef AN - OPUS4-2742 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Barthel, Mathias A1 - Seeger, Stefan A1 - Rothhardt, Monika A1 - Wilke, Olaf A1 - Horn, Wolfgang A1 - Juritsch, Elevtheria A1 - Hahn, Oliver A1 - Jann, Oliver T1 - Erfassung der Zahl feiner und ultrafeiner Partikel aus Bürogeräten während der Druckphase zur Entwicklung eines Prüfverfahrens für das Umweltzeichen Blauer Engel für Bürogeräte mit Druckfunktion (UFOPLAN 370895301) KW - Bürogeräte mit Laserdruckfunktion KW - Feine und ultrafeine Partikel KW - Chemische Emissionen KW - Blauer Engel PY - 2013 UR - http://www.umweltbundesamt.de/publikationen/erfassung-zahl-feiner-ultrafeiner-partikel-aus SN - 1862-4804 SN - 0722-186X IS - 74 SP - 1 EP - 189 PB - Umweltbundesamt CY - Dessau-Roßlau AN - OPUS4-27523 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan T1 - Beobachtung und Analyse komplexer Emissionsereignisse am Beispiel partikelförmiger und gasförmiger Emissionen aus Laserdruckern T2 - Seminar: Particle measurement from science to industry CY - Braunschweig, Germany DA - 2007-06-05 PY - 2007 AN - OPUS4-15029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Barthel, Mathias A1 - Seeger, Stefan A1 - Rothhardt, Monika A1 - Wilke, Olaf A1 - Horn, Wolfgang A1 - Juritsch, Elevtheria A1 - Hahn, Oliver A1 - Jann, Oliver T1 - Measurement of fine and ultrafine particles from office devices during printing in order to develop a test method for the Blue Angel ecolabel for office-based printing devices KW - Bürogeräte KW - Laserdrucker KW - Partikelemissionen PY - 2013 UR - http://www.umweltbundesamt.de/publikationen/measurement-of-fine-ultrafine-particles-from-office SN - 1862-4804 VL - 75 IS - UBA-FBNr: 001743/E / FKZ: 3708 95 301 SP - 1-142, Suppl.RAL-UZ-122 1-39 PB - Umweltbundesamt CY - Dessau-Roßlau AN - OPUS4-28987 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan A1 - Wilke, Olaf T1 - Aerosol- und Gasemissionen aus 3D-Druckern (Additive manufacturing) N2 - Kunststoffverarbeitende 3D-Drucker (FDM-Drucker) werden im Hobbybereich und in der beruflichen Ausbilldung immer beliebter und sind mittlerweile weit verbreitet. Es wird häufig noch nicht ausreichend beachtet, dass von diesen Geräten im Betrieb in erheblichen Mengen Gase und Partikel in die Umgebung emittiert werden. Der Vortrag berichtet über einen Vergleich des Emissions-verhaltens verschiedener Materialien für 3D-Drucker und stellt diese in Zusammenhang mit anderen Innenraum-Emissionsquellen. T2 - 30. Palas Aerosol Technologie Seminar CY - Karlsruhe, Germany DA - 19.09.2016 KW - 3D-Drucker KW - Additive manufacturing KW - Partikelemissionen KW - Fused deposition modeling (FDM) PY - 2016 AN - OPUS4-37684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan T1 - Instruments for Fine and Ultrafine Particle Emission Characterization N2 - An overview on instruments and methods for the measurement and chemical characterization of particulate emissions from local sources is presented T2 - BAM - JBMIA (Japan Business Machine and Information System Industries Association) Meeting, JBMIA Emissions Working Group Meeting CY - Tokyo, Japan DA - 04.05.2019 KW - Aerosol spectroscopy KW - Particulate emission KW - Chemical analysis KW - Total reflection X-ray spectroscopy KW - Calibration PY - 2019 AN - OPUS4-47816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Bresch, Harald A1 - Dörfel, Ilona A1 - Steinborn, Gabriele A1 - Krietsch, Arne A1 - Langner, Jeanette A1 - Schmidt, Martin A1 - Österle, Werner A1 - Seeger, Stefan T1 - Physical-chemical characterization of NM105(P25) N2 - NM 105, Ti02 (P25) could not be ignited as dust layer and dispersed in air as dust/air-mixture as well. This dust is not dust explosible and the burning behaviour corresponds to Burning Class 1 (no Ignition). The results have shown that the tested sample is thus not combustible at all, because it is already oxidized completely. KW - OECD KW - WPMN KW - TiO2 KW - NM105 KW - P25 KW - Sponsorship programme PY - 2012 SP - 1 EP - 18 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-27322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herbig, B. A1 - Jörres, R. A. A1 - Schierl, R. A1 - Simon, M. A1 - Langner, Jeanette A1 - Seeger, Stefan A1 - Nowak, D. A1 - Karrasch, S. T1 - Psychological and cognitive effects of laser printer emissions: A controlled exposure study N2 - The possible impact of ultrafine particles from laser printers on human health is controversially discussed although there are persons reporting substantial symptoms in relation to these emissions. A randomized, single-blinded, cross-over experimental design with two exposure conditions (high-level and low-level exposure) was conducted with 23 healthy subjects, 14 subjects with mild asthma, and 15 persons reporting symptoms associated with laser printer emissions. To separate physiological and psychological effects, a secondary physiologically based categorization of susceptibility to particle effects was used. In line with results from physiological and biochemical assessments, we found no coherent, differential, or clinically relevant effects of different exposure conditions on subjective complaints and cognitive performance in terms of attention, short-term memory, and psychomotor performance. However, results regarding the psychological characteristics of participants and their situational perception confirm differences between the participants groups: Subjects reporting symptoms associated with laser printer emissions showed a higher psychological susceptibility for adverse reactions in line with previous results on persons with multiple chemical sensitivity or idiopathic environmental intolerance. In conclusion, acute psychological and cognitive effects of laser printer emissions were small and could be attributed only to different participant groups but not to differences in exposure conditions in terms of particle number concentrations. KW - Cognitive performance KW - Exposure KW - Idiopathic environmental intolerance KW - Laser printer emission KW - Multiple chemical sensitivity KW - Subjective complaints PY - 2018 DO - https://doi.org/10.1111/ina.12429 SN - 1600-0668 SN - 0905-6947 VL - 28 IS - 1 SP - 112 EP - 124 PB - John Wiley & Sons, Inc. CY - 111 RIVER ST, HOBOKEN 07030-5774, NJ USA AN - OPUS4-43945 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Seeger, Stefan T1 - Auswertung durch anerkannte Prüfstellen nach dem Standard RAL-UZ 171, Anhang S-M durchgeführter Prüfungen der Partikelemissionen zur Fortentwicklung des Blauen Engel T1 - Evaluation of test reports on the particle emission from office equipment with printing function, based on the award criteria RAL-UZ 171, Annex SM, targeting to the development of the Blue Angel N2 - Mit der überarbeiteten Version der Vergabegrundlagen des Umweltzeichens Blauer Engel für Bürogeräte mit Druckfunktion (RAL-UZ 171:2012) wurde für die Partikelemission ein Prüfverfahren und ein Prüfwert eingeführt. Dies ergänzt die zahlreichen anderen Kriterien, die bereits Voraussetzungen für die Vergabe des Blauen Engels an Bürogeräte mit Druckfunktion waren. Die Anwendung des Prüfwertes für Partikelemissionen wurde von der Jury Umweltzeichen in 2012 zunächst nur für Geräte unterhalb 250 l Volumen - sogenannte Tischgeräte - beschlossen. Für größere Geräte (> 250 l, sogenannte Standgeräte) wurde eine Dokumentation des Messergebnisses im Rahmen des Prüfberichtes festgelegt. Ein Grund für diese Unterscheidung war die Tatsache, dass zu diesem Zeitpunkt für die Standgeräte keine für eine sinnvolle Festlegung eines Prüfwerts ausreichende Zahl an Messwerten und keine Erfahrungen aus entsprechenden Emissionsprüfungen vorlagen. Notwendig zur beabsichtigten Festlegung des Prüfwerts für die Partikelemission aus großen Bürogeräten war deshalb die systematische Erfassung und Bewertung der durch die anerkannten Prüfinstitute nach Inkrafttreten der RAL-UZ 171 ermittelten Ergebnisse. Dies wurde in diesem Forschungsprojekt durchgeführt. Das Forschungsprojekt befasste sich des Weiteren mit der Ermittlung und Beurteilung der Qualität der Partikelemissionsprüfungen auf Basis der zur Verfügung stehenden Prüfberichte in beiden Größenkategorien. Im Ergebnis stellte sich heraus, dass die Qualität der Prüfungen der Partikelemission insgesamt mit einer Fehlerquote von 3 % ungültiger Prüfungen sehr gut war. Ein weiteres Ergebnis ist, dass keine prüfmethodischen oder qualitätsrelevanten Gründe gegen die Anwendung des bestehenden Prüfwerts auf große Bürogeräte sprechen. N2 - With the revision of the award criteria RAL-UZ 171:2012 "Office Equipment with Printing Function (Printers, Copiers and Multifunction Devices)" an additional test guideline along with a criterion for the emission of particles was included. The environmental label jury decided that this criterion was assigned with a test value and is obligatory only for the category of printing devices with volumes below 250 liters. For the larger printing devices (> 250 liters) the particle emission has to be tested and declared in the test report. This reflects the fact that the insufficient knowledge on particle emissions from large printing devices at that time was not a good basis for the determination of a test value. It was considered necessary to systematically review the results on particle emissions in all valid test reports from acknowledged test laboratories after the new award criteria came into effect in 2013. It was intended to decide on a test value for large devices based on this review. This is the core of the present research project. Further, all test reports on particle emissions, registered as valid by RAL, were subjected to a quality check. It turned out that the failure rate of reports with major faults is at 3 % only. As a result there are no methodological or quality-related reasons against making the test criterion mandatory also for the large printing devices. KW - Bürogeräte mit Druckfunktion KW - Laserdrucker KW - Partikelemission KW - Blauer Engel KW - Vergaberichtlinie KW - RAL-UZ 171 KW - Office equipment with printing function KW - Laser printer KW - Particle emission KW - Award criteria KW - Blue Angel KW - RAL-UZ 171 PY - 2016 N1 - Forschungskennzahl 3712 95 338 2 - Project No. 3712 95 338 2 VL - Berichtsnummer UBA-FB 00 SP - 1 EP - 18 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-59858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Seeger, Stefan A1 - Wilke, Olaf A1 - Bücker, Michael A1 - Jann, Oliver T1 - Time- and Size-Resolved Characterization of Particle Emissions from Office Machines with Printing Function T2 - Healthy Buildings 2006 CY - Lisboa, Portugal DA - 2006-06-04 KW - Hard copy devices KW - Laserprinters KW - Toner KW - Particle emissions KW - Particles KW - Aerosols PY - 2006 SN - 978-989-95067-1-8 VL - 2 SP - 447 EP - 450 CY - Lissabon AN - OPUS4-14522 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan A1 - Gusovius, H.-J. A1 - Wallot, G. ED - Peukert, W. ED - Schreglmann, C. T1 - A new measurement method to evaluate length related properties of natural bast fibres T2 - PARTEC 2007 - International Congress on Particle Technology CY - Nuremberg, Germany DA - 2007-03-27 KW - Bast fibres KW - Natural fibres KW - Fibre length distribution KW - Image analysis PY - 2007 SP - 1 EP - 4 PB - Nürnberg Messe CY - Nürnberg AN - OPUS4-16099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan A1 - Bresch, Harald A1 - Bücker, Michael A1 - Hahn, Oliver A1 - Jann, Oliver A1 - Wilke, Olaf A1 - Böcker, Wolfgang D. G. T1 - Qualitative characterization of nanoparticle emissions from office machines with printing functions T2 - Ultrafine Particles in Urban Air - Abschlußkonferenz des EU-Projektes UFIPOLNET, Sächsisches Landesamt für Umwelt und Geologie LfUG CY - Dresden, Germany DA - 2007-10-23 PY - 2007 AN - OPUS4-16161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Wilke, Olaf A1 - Jann, Oliver A1 - Brödner, Doris A1 - Schneider, Uwe A1 - Krocker, Christian A1 - Kalus, Sabine A1 - Seeger, Stefan A1 - Bücker, Michael T1 - Prüfung von Emissionen aus Bürogeräten während der Druckphase zur Weiterentwicklung des Umweltzeichens Blauer Engel für Laserdrucker und Multifunktionsgeräte unter besonderer Berücksichtigung der Sicherung guter Innenraumluftqualität KW - Emissionen KW - Emissionsmesskammern KW - VOC KW - TVOC KW - Ozon KW - Staub KW - RAL-UZ 122 KW - Blauer Engel KW - Bürogerät KW - Laserdrucker KW - Partikel PY - 2008 UR - http://www.umweltbundesamt.de/publikationen/pruefung-von-emissionen-aus-buerogeraeten-waehrend SN - 1862-4804 VL - 35 IS - 8 SP - 1 EP - 164 PB - Umweltbundesamt CY - Dessau-Roßlau AN - OPUS4-18265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan A1 - Thurner, J. U. T1 - Erarbeitung von Prüfkriterien für die Emission ultrafeiner Partikel aus Hardcopy-Geräten und Laserdruckern T2 - 16. WaBoLu-Innenraumtage, Verein für Wasser-, Boden- und Lufthygiene e. V., UBA CY - Berlin, Germany DA - 2009-05-18 PY - 2009 AN - OPUS4-19508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seeger, Stefan T1 - Zeitaufgelöste Partikelemissionsmessungen an Bürogeräten mit Laserdruckfunktion T2 - 25. Aerosol Technologie Seminar, Fa. Palas GmbH CY - Karlsruhe, Germany DA - 2011-09-12 PY - 2011 AN - OPUS4-24380 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -