TY - JOUR A1 - Rücker, Werner A1 - Lüddecke, Falk A1 - Thöns, Sebastian T1 - Tragverhalten von Offshore Gründungskonstruktionen - Rechnerische und messtechnische Untersuchungen N2 - Dieser Artikel enthält eine Zusammenfassung von Ergebnissen des Forschungsverbundvorhabens 'OGOWIN: Optimierung aufgelöster Gründungsstrukturen für Offshore-Windenergieanlagen hinsichtlich Materialeinsatz, Montageablauf und neuer Fertigungsverfahren'. Die Ergebnisse umfassen (1) eine Untersuchung des dynamischen Verhaltens der verschiedenen Gründungsvarianten Monopile, Tripod und Jacket, (2) die Ermittlung einer Wöhlerlinie für den Grundwerkstoff eines Stahlgussknotens, (3) die Ermittlung der Traglast eines Stahlgussknotens in einem 1:1-Versuch sowie (4) Berechnungen zur Form- und Materialoptimierung. Zur Überwachung der Gebrauchstauglichkeit während des Betriebes wurden relevante Parameter hinsichtlich ihres Einflusses auf die ersten Eigenfrequenzen der o. g. Gründungskonstruktionen rechnerisch untersucht. Untersuchungen der Ermüdungsfestigkeit und die erstmalige experimentelle Ermittlung der Traglast eines Gussknotens tragen zu einem optimierten Entwurf durch genaue Kenntnis des Materialverhaltens und der höchstbeanspruchten Bereiche bei. Darüber hinaus konnte gezeigt werden, dass eine geometrische Optimierung des Stahlgussknotens unter konstruktiven Randbedingungen zu einer Verringerung des Materialaufwandes bzw. zu einer Erhöhung der Traglast führen kann. -------------------------------------------------------------------------------------------------------------------------------------- This paper contains a summary of the joint research project 'OGOWIN: Optimisation of support structures for offshore wind turbines regarding the material consumption, the construction and production sequence as well as new production methodologies'. The results comprise (1) a modal analyses of various types of offshore wind turbine support structures, (2) the fatigue strength testing of the cast steel material, (3) a large scale ultimate capacity test of a cast steel tube connection and (4) an optimisation of the tube connection aiming at material and stress reduction. The sensitivity of the relevant parameters on the first natural frequencies was quantified and the most influencing parameters were identified. The analyses of the fatigue strength and of the ultimate capacity of the cast steel tube connection support an optimised design by precise knowledge of the failure mechanisms and material behaviour. Moreover, it is shown that optimising the cast steel node can reduce the material use and stress concentration. KW - Gussknoten KW - Ermüdung KW - Traglast KW - Optimierung KW - Cast steel tube connection KW - Fatigue KW - Ultimate capacity KW - Optimisation KW - Meerestechnik KW - Offshore engineering KW - Stahlbau KW - Steel construction KW - Neue Verfahren/Versuchstechnik KW - New Processes/Experimental Techniques PY - 2012 U6 - https://doi.org/10.1002/bate.201200022 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 89 IS - 12 SP - 821 EP - 830 PB - Ernst & Sohn CY - Berlin AN - OPUS4-27426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner T1 - Fatigue and serviceability limit state model basis for assessment of offshore wind energy converters N2 - This paper develops the models for the structural performance of the loading and probabilistic characterization for the fatigue and the serviceability limit states for the support structure of offshore wind energy converters. These models and a sensitivity study are part of a risk based assessment and monitoring framework and will be applied for establishing the 'as designed and constructed' reliability as prior information for the assessment and the design of monitoring systems. The constitutive physical equations are introduced in combination with the fatigue and serviceability limit state requirements as the starting point for the development of the structural performance and loading models. With these models introduced in detail, several modeling aspects for both limit states are analyzed. This includes analyses of the influence on the hot spot stresses by applying a contact formulation for the pile guide brace connection and the application of a finite element formulation using solid elements. Further, the comparison of the natural frequencies of a discrete rotor model with a continuous rotor model is documented. To account for uncertainties associated with the structural and loading models, a probabilistic model is derived on the basis of literature review and measurement data from a prototype Multibrid M5000 support structure. The sensitivity study is based on the calculation of a nonlinear coefficient of correlation in conjunction with predetermined designs of experiments. This is conducted by a systematic analysis of the influence of the random variables on limit state responses and hence on the structural reliability. Integrating the analyses and sensitivity studies of the fatigue and serviceability limit state models developed in this paper as well as the ultimate limit state models in Thöns et al. ('Ultimate Limit State Model Basis for Assessment of Offshore Wind Energy Converters,' ASME J. Offshore Mech. Arct. Eng.), the model basis for the assessment is completed. The process of establishing and analyzing such a model basis contributes to a detailed understanding of the deterministic and probabilistic characteristics of the structure and provides valuable insights in regard to the significance of available data. KW - Fatigue KW - Finite element analysis KW - Rotors KW - Wind power PY - 2012 U6 - https://doi.org/10.1115/1.4004514 SN - 0892-7219 VL - 134 IS - 3 SP - 031905-1 - 031905-10 CY - Fairfield, NJ AN - OPUS4-26437 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -