TY - CONF A1 - Kapoor, M. A1 - Sørensen, J. D. A1 - Ghosh, S. A1 - Thöns, Sebastian T1 - Decision theoretic approach for identification of optimal proof load with sparse resistance information N2 - Proof load testing may be performed to confirm the reliability of the bridge for an existing classification or to prove the reliability for a higher classification. In this paper, a probabilistic decision analysis approach is applied to the scenario for the evaluation of target proof load in the situation where information on the bridge resistance model is lacking. In this case, the resistance model is established by proof loading and taking very basic prior knowledge into account. The decision scenario is modelled in the context of the proof load test planner who shall choose the required load level for assessment of a bridge. The choice of the load level depends on the risks due to the testing and the expected benefit gain from the test. Information acquired about the loading response from monitoring during the proof load testing is modelled by taking basis in the model uncertainty formulation. The optimal proof load level for classification of a single lane, simply supported bridge of 8m span subjected to live load from very heavy (gross weight > 80 tons) transport vehicles was calculated. The optimal proof load level was identified as leading to a positive expected benefit gain to the decision maker while also satisfying target reliability criteria for remaining service life. The analysis was performed for the evaluation of bridge performance with respect to five classifications of very heavy transport vehicles with different vehicle weights and configurations. T2 - 10th International Conference on Bridge Maintenance, Safety and Management (IABMAS) CY - Sapporo, Japan DA - 11.04.2021 KW - Proof load testing KW - Probabilistic decision analysis KW - Bridge resistance model PY - 2021 SN - 978-0-429-27911-9 U6 - https://doi.org/10.1201/9780429279119-104 SP - 789 EP - 797 PB - CRC Press CY - Boca Raton, Florida AN - OPUS4-57879 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Faber, M.H. A1 - Thöns, Sebastian ED - Miraglia, S. ED - Vrouwenvelder, A.C.W.M. ED - Steenbergen, R.D.J.M. ED - Van Gelder, P.H.A.J.M. T1 - On the value of structural health monitoring T2 - 22nd ESREL conference - Safety, reliability and risk analysis: Beyond the horizon CY - Amsterdam, The Netherlands DA - 2013-09-29 PY - 2014 SN - 978-1-138-00123-7 SP - 2535 EP - 2544 PB - Taylor & Francis AN - OPUS4-29894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hu, Wei-Hua A1 - Thöns, Sebastian A1 - Said, Samir A1 - Rücker, Werner ED - Cunha, A. ED - Caetano, E. ED - Ribeiro, P. ED - Müller, G. T1 - Resonance phenomenon in a wind turbine system under operational conditions N2 - A prototype of wind turbines in 5 megawatt dass was built and tested at the first German offshore wind energy test fteld in the North Sea. In order to investigate dynamic behaviors under a complex state of loads, a continuous dynamic monitoring System was implemented by Federal Institute for Material Research and Testing (BAM). It recorded structural responses and environmental/operational variables from November 2007 to October 2009. This paper presents significant resonance phenomenon due to the interaction in the tower-nacelle System under operational conditions. Modal parameters are automatically estimated by the poly reference Least Square Complex Frequency domain (p-LSCF) method. Campbell plot demonstrates that a three-blade passage frequency and its multiples f3n match with the natural frequencies of the wind turbine System in several modal Orders. The damping estimates decrease and the Vibration amplitude increase significantly. A control System is necessary to minimize the excessive vibrations. T2 - EURODYN 2014 - 9th International conference on structural dynamics CY - Porto, Portugal DA - 30.06.2014 KW - Wind turbine KW - Tower-nacelle system KW - Resonance KW - Continuous dynamic monitoring KW - Automated operational modal analysis PY - 2014 SN - 978-972-752-165-4 SN - 2311-9020 SP - 3619 EP - 3626 AN - OPUS4-32970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Ronald A1 - Thöns, Sebastian A1 - Straub, D. ED - Strauss, A. ED - Frangopol, D.M. ED - Bergmeister, K. T1 - Probalistic fatigue crack growth modeling for reliability-based inspection planning N2 - The fatigue deterioration modeling for welded steel structures subjected to high cycle fatigue is presented in the current document. The aim of this paper is to formulate approaches based on actual Research results for the phases fatigue crack initiation, fatigue propagation and fatigue failure. The physical characteristics of the approaches are discussed in combination with the associated uncertainties and the probabilistic modeling of this time variant reliability problem. The fatigue deterioration modeling documented here serve as a basis for a reliability-based approach to inspection planning. T2 - 3rd International symposium on life-cycle civil engineering CY - Vienna, Austria DA - 03.10.2012 PY - 2012 SN - 978-0-415-62126-7 SP - 319 EP - 326 PB - CRC Press AN - OPUS4-27067 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Ronald A1 - Thöns, Sebastian A1 - Straub, D. ED - Strauss, A. ED - Frangopol, D.M. ED - Bergmeister, K. T1 - Reliability-based inspection planning with application to orthotropic bridge deck structures subjected to fatigue N2 - A reliability-based approach to inspection planning for welded steel structures subjected to high cycle fatigue is presented in the current document. Inspections are an effective means to control the Progress of fatigue deterioration and the presented approach allows to determine the minimum required inspection effort so that the considered structure complies with the given risk acceptance criteria in terms of target reliability throughout its service life. T2 - 3rd International symposium on life-cycle civil engineering CY - Vienna, Austria DA - 03.10.2012 PY - 2012 SN - 978-0-415-62126-7 SP - 311 EP - 318 PB - CRC Press AN - OPUS4-27068 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - McMillan, D. T1 - Condition monitoring benefit for offshore wind turbines T2 - PMAPS 2012 - 12th International conference on Probabilistic Methods Applied to Power Systems CY - Istanbul, Turkey DA - 2012-06-10 KW - Condition monitoring KW - Offshore wind KW - Operation KW - Risk KW - Life cycle KW - Cost KW - Cost benefit analysis KW - Offshore wind turbine KW - Operation management KW - Structural integrity management PY - 2012 SP - 37 EP - 42 AN - OPUS4-26117 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Risikobasierte Überwachungsverfahren zur Lebensdauerverlängerung von bestehenden und neuen Bauwerken T1 - Risk based condition monitoring for life cycle extension of structures N2 - Diese Veröffentlichung enthält Konzepte zur Lebensdauerverlängerung von Bauwerken auf der Grundlage der Tragwerkszuverlässigkeitstheorie. Es werden aktuelle Forschungsergebnisse aus nationalen und europäischen Forschungsvorhaben vorgestellt. Den Schwerpunkt bildet die Verwendung von Bauwerksüberwachungsdaten unter Berücksichtigung von Messunsicherheiten zur Bestimmung der Tragwerkszuverlässigkeit. Dazu wird ein neuer Ansatz zur Bestimmung der A-posteriori Messunsicherheit vorgestellt. Es wird gezeigt, aufgrund welcher Eigenschaften der verwendeten probabilistischen Modelle die Zuverlässigkeit im Grenzzustand der Ermüdung in Bezug auf eine Lebensdauerverlängerung beeinflusst werden kann. N2 - This paper contains approaches aiming at the life cycle extension of structures on the basis of the structural reliability theory. Actual research results are presented with the focusing on the utilisation of monitoring data for the structural reliability analysis. In this context a framework for the determination of the posterior measurement uncertainty applying Bayesian Updating the process equation based measurement uncertainty with the Observation based measurement uncertainty is introduced. The general concepts for the utilisation of monitoring data and inspection data for updating the structural reliability in the view of life cycle extension are outlined. The characteristics of monitoring data in the context of the structural reliability theory are shown in detail on the basis of an example. T2 - DVM-Tag 2011 - Bauteilzuverlässigkeit - Schäden und ihre Vermeidung CY - Berlin, Germany DA - 04.05.2011 KW - Lebensdauerverlängerung KW - Tragwerkszuverlässigkeit KW - Messunsicherheit KW - Bauwerksüberwachung KW - Life cycle extension KW - Structural reliability KW - Measurement uncertainty KW - Structural monitoring PY - 2011 SN - 0946-5987 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 678 SP - 1 EP - 10 AN - OPUS4-23720 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Faber, M.H. T1 - Support structure reliability of offshore wind turbines utilizing an adaptive response surface method T2 - OMAE 2010 - 29th International conference on ocean, offshore and arctic engineering CY - Shanghai, China DA - 2010-06-06 PY - 2010 IS - OMAE2010-20546 SP - 1 EP - 10 AN - OPUS4-21666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -