TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Rohrmann, Rolf T1 - Messkonzept für die Strukturüberwachung der Multibrid M5000 T2 - InnoNet-Status-Seminar CY - Bremen, Germany DA - 2006-11-21 PY - 2006 AN - OPUS4-18628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohrmann, Rolf A1 - Rücker, Werner A1 - Thöns, Sebastian T1 - Integrated Monitoring Systems for Offshore Wind Turbines T2 - 6th International Workshop on Structural Health Monitoring CY - Stanford, USA DA - 2007-09-11 KW - Integrated Monitoring System KW - Damage Identification KW - Load Monitoring KW - Wind turbines PY - 2007 SP - 1 EP - 8 AN - OPUS4-16280 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - IMO-WIND - Tragwerkszuverlässigkeit in einem industrienahen Forschungsprojekt T2 - Vortrag an der TU Berlin CY - Berlin, Germany DA - 2007-01-29 PY - 2007 AN - OPUS4-18961 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Rohrmann, Rolf A1 - Rücker, Werner A1 - Faber, M.H. T1 - Bewertung der Ermüdungsfestigkeit von Baustrukturen in Offshore-Windenergie-Anlagen N2 - Das Bauwerk einer Windenergieanlage dient der Sicherstellung der Energieproduktion. Eine entsprechende Zuverlässigkeit der Struktur und deren permanente Bewertung und Unterhaltung ist dazu notwendig. In diesem Beitrag werden Möglichkeiten der Bewertung des für die Struktur wichtigen Schädigungsmechanismus Ermüdung sowie dessen Überwachung in Zusammenhang mit Schädigungsindikatoren aufgezeigt. Dabei wird auf strukturmechanische, werkstoffmechanische und probabilistische Modelle sowie auf Messdaten eines Prototyps einer OWEA zurückgegriffen. Ausgehend von der gesamtdynamischen Berechnung wird die Zuverlässigkeit gemäß der Auslegung für den Schädigungsmechanismus Ermüdung durch ein Wöhlerlinienmodell berechnet. Damit werden ermüdungssensible Komponenten der Struktur identifiziert. Schädigungsindikatoren zur Überwachung der Ermüdungsfestigkeit werden auf Grundlage schädigungs-äquivalenter Dehnungen vorgestellt. Fatigue assessment of support structures for offshore wind energy converters. The structure of wind energy converters secures a reliable energy production. Hence an adequate reliability of the structure and additionally permanent assessment and maintenance is required. Within this paper methods for the assessment of the important damage mechanism fatigue in combination with monitoring of the fatigue reliability utilizing damage indicators are proposed. These methods comprise structural system, material degradation and probabilistic models as well as monitoring data of an offshore wind energy converter prototype. The structural reliability of the structure as designed is calculated based on an overall dynamic analysis using a SN-approach. Herewith fatigue sensitive components are identified. Damage indicators for monitoring the fatigue reliability based on damage equivalent strains are presented. KW - Bewertung KW - Offshore-Windenergie KW - Ermüdung KW - Strukturspannungskonzept KW - Zuverlässigkeit KW - Schadensindikatoren KW - Integrated Monitoring System KW - Damage Identification KW - Load Monitoring KW - Wind turbines PY - 2008 U6 - https://doi.org/10.1002/stab.200810076 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 77 IS - 9 SP - 630 EP - 638 PB - Ernst CY - Berlin AN - OPUS4-17977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Anwendung stochastischer Methoden zur Zustandsbewertung von Offshore-Windenergieanlagen T2 - Vortrag am Fachgebiet Statik und Dynamik CY - Berlin, Germany DA - 2008-02-07 PY - 2008 AN - OPUS4-16512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner A1 - Rohrmann, Rolf T1 - Assessment and monitoring of reliability and robustness of offshore wind energy converters T2 - ESREL 2008 CY - Valencia, Spain DA - 2008-09-22 PY - 2008 AN - OPUS4-18076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Faber, M.H. T1 - Robustness of Offshore Wind Energy Converters T2 - ETH Zürich CY - Zurich, Switzerland DA - 2008-02-05 PY - 2008 AN - OPUS4-18077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner A1 - Rohrmann, Rolf ED - Martorell, S. ED - et al., T1 - Assessment and monitoring of reliability and robustness of offshore wind energy converters T2 - ESREL 2008 CY - Valencia, Spain DA - 2008-09-22 KW - Structural reliability KW - Robustness KW - Monitoring KW - Risk KW - Wind energy converter PY - 2008 SN - 978-0-415-48513-5 SP - 1567 EP - 1572 PB - Taylor & Francis CY - London, UK AN - OPUS4-18565 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohrmann, Rolf A1 - Rücker, Werner A1 - Thöns, Sebastian A1 - Said, Samir T1 - Design and operation of integrated monitoring systems for offshore wind turbines N2 - To ensure a high operational reliability of future generations of offshore wind conversion systems (OWEC) with economically acceptable repair and maintenance efforts, comprehensive diagnosis and supervision concepts are required. Automatic monitoring systems will be an essential part of such concepts. Because of the fact, that during operation there will be static and dynamic interaction between the components 'structure', 'machinery' and 'blades' it is necessary to develop the monitoring techniques in an overall concept. These monitoring systems are supposed to be applied for the design and testing as well as for the operation and maintenance phases. The used methods are focused on the design requirements for the structure, which are stated in the respective standards and certification guidelines. For the validation of the design, methods are specified which would be also applicable for SHM in the operating condition, e.g. for the evaluation of the structural conditon possibly after the occurrence of damages or changes. The further task consists in the realization of condition monitoring for all components, aiming at early damage detection and the observation of the damage development and its evaluation. Here the task consists of determining with assessment procedures the optimum time for maintenance actions to be carried out. T2 - DEWEK 2008 - 9th German wind energy conference CY - Bremen, Germany DA - 2008-11-26 KW - Integrated monitoring system KW - Offshore wind turbines KW - Assessment KW - Damage identification KW - Load monitoring PY - 2008 SP - 1 EP - 4(?) AN - OPUS4-19872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rohrmann, Rolf A1 - Rücker, Werner A1 - Thöns, Sebastian A1 - Said, Samir A1 - Schmid, Wolfgang T1 - Ergebnisse der Dauerüberwachung an einem Prototypen von Offshore-Windenergieanlagen T2 - 3. VDI-Fachtagung - Baudynamik CY - Kassel, Deutschland DA - 2009-05-14 KW - Integrated Monitoring System KW - Offshore wind turbines KW - Assessment KW - Damage identification KW - Load monitoring PY - 2009 SN - 978-3-18-092063-4 SN - 0083-5560 VL - 2063 SP - 455 EP - 466 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-19795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Hille, Falk A1 - Karabeliov, Krassimire A1 - Rücker, Werner T1 - Damage detection and risk estimation of bridge S101 T2 - IRIS Summer Academy CY - Zell am See, Austria DA - 2009-04-01 PY - 2009 AN - OPUS4-20495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian T1 - Buckling reliability of steel shells utilising the Eurocode 3 methodology T2 - JCSS workshop on FEM and reliability code requirements, TU Delft CY - Delft, Netherlands DA - 2009-12-01 PY - 2009 AN - OPUS4-20910 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rohrmann, Rolf A1 - Rücker, Werner T1 - Integral Monitoring System for Offshore Wind Turbines T2 - IRIS Summer Academy CY - Zell am See, Austria DA - 2009-04-01 PY - 2009 AN - OPUS4-20076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohrmann, Rolf A1 - Thöns, Sebastian A1 - Said, Samir A1 - Schmid, Wolfgang A1 - Rücker, Werner A1 - Bicker, S. T1 - Design-Verifikation von Offshore-Windenergieanlagen mit Hilfe integraler Überwachungssysteme T2 - Finales Statusseminar zum Forschungsvorhaben IMO-WIND CY - Berlin, Germany DA - 2009-10-01 PY - 2009 AN - OPUS4-20077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian T1 - Monitoring- und Risikoanalyseverfahren am Beispriel von Offshore-Windenergieanlagen T2 - BAM Kolloquium CY - Berlin, Germany DA - 2009-09-30 PY - 2009 AN - OPUS4-20078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Rohrmann, Rolf T1 - Probabilistische Zustandsbewertungsverfahren für Offshore-Windenergieanlagen T2 - IMO-WIND Statusseminar, BAM CY - Berlin, Germany DA - 2009-10-01 PY - 2009 AN - OPUS4-20079 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Faber, M.H. T1 - Support structure reliability of offshore wind turbines utilizing an adaptive response surface method T2 - OMAE 2010 - 29th International conference on ocean, offshore and arctic engineering CY - Shanghai, China DA - 2010-06-06 PY - 2010 IS - OMAE2010-20546 SP - 1 EP - 10 AN - OPUS4-21666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner T1 - Support Structure Reliability of Offshore Wind Turbines Utilizing an Adaptive Response Surface Method T2 - 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2010) CY - Shanghai, China DA - 2010-06-06 PY - 2010 AN - OPUS4-21650 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Faber, M.H. A1 - Thöns, Sebastian A1 - Narasimhan, H. A1 - Schubert, M. T1 - Risikobasierter Ansatz zur Bewertung der Robustheit von Bauwerken N2 - Ziel des vorliegenden Beitrages ist es, einen Überblick über die aktuellen Entwicklungen im Bereich der Bewertung und der Quantifizierung der Robustheit von Bauwerken zu geben. In diesem Sinne ist eine Zusammenstellung von Ansätzen und Ergebnissen aktueller Veröffentlichungen enthalten. Ein umfassender entscheidungstheoretischer Ansatz für die Berechnung und das Management der Robustheit wird vorgestellt. Dieser beinhaltet die Definition der Robustheit als eine Qualität eines Systems, welches das Bauwerk beinhaltet, d. h. eine Qualität, die auf der Grundlage einer Risikoanalyse bewertet werden kann. Um eine umfassende Risikoanalyse zu ermöglichen, wird ein szenarienbasierter Modellansatz eingeführt, welcher zwei Arten von Konsequenzen im System unterscheidet: direkte Konsequenzen (in Verbindung mit Schäden einzelner Komponenten des Systems) und indirekte Konsequenzen (in Verbindung mit einem Versagen des Systems). Die Definition des Systems spielt deshalb für die Risikoanalyse eine wichtige Rolle, und es wird diskutiert, wie die Robustheit für verschiedene Definitionen zu unterschiedlichen Ergebnissen und Erkenntnissen im Sinne des Managements der Integrität des Bauwerks im gesamten Lebenszyklus unter Berücksichtigung seiner Funktionalität führt. Weiterhin werden wichtige Aspekte der Standardisierung der Robustheitsanalyse, wie auch Anforderungen an die Robustheit, diskutiert und Vorschläge zum Umgang mit diesen Aspekten unterbreitet. Auf der Grundlage der vorgestellten Ansätze zur Berechnung der Robustheit eines Bauwerks wird beschrieben, wie Entscheidungen in Bezug auf den Entwurf, die Zustandsbewertung, auf Inspektionen und Wartung sowie in Bezug auf die Überwachung von Bauwerken, in Hinblick auf das Management der Risiken in allen Phasen des Lebenszyklus, optimiert werden können. KW - Qualität KW - Risikoanalyse KW - Modellansatz KW - Konsequenz KW - Direkt KW - Indirekt KW - Versagen KW - Schaden KW - Lebenszyklus KW - Hängebrücke KW - Quality KW - Risk assessment KW - Model approach KW - Consequence KW - Direct KW - Indirect KW - Failure KW - Damage KW - Life-cycle KW - Suspension bridge KW - Entwurf und Konstruktion KW - Berechnungs- und Bemessungsverfahren KW - Bestandssicherung und Erhaltung PY - 2010 U6 - https://doi.org/10.1002/stab.201001354 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 79 IS - 8 SP - 547 EP - 555 PB - Ernst CY - Berlin AN - OPUS4-21862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rohrmann, Rolf A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Integrated monitoring of offshore wind turbines - requirements, concepts and experiences N2 - Wind turbines on offshore sites (OWECs) are subjected to combined loads from wind and waves. These dynamic loads, with a frequency content within the range of the natural frequencies of the structures, cause fatigue-effective stresses in the substructures of wind turbines. Therefore, the examination of natural frequencies is an important part within the design process of wind turbines. The quality of the numerical models for such calculations is of great importance, since the certification guidelines permit only small uncertainties in modal analysis results. The accuracy of the parameters of the numerical model can only be achieved through a comparison of simulation results with corresponding test results. Therefore, it is necessary to measure the dynamic behaviour of all components of the wind turbines simultaneously. This is true not only for the design verification, but also for monitoring the OWECs in operation. The potential of integrated systems for monitoring-based maintenance optimisation should thus be used. KW - Offshore wind turbines KW - Integrated monitoring system KW - Structural assessment KW - Damage indicators KW - Dynamic loads KW - Data management PY - 2010 U6 - https://doi.org/10.1080/15732470903068706 SN - 1573-2479 SN - 1744-8980 VL - 6 IS - 5 SP - 575 EP - 591 PB - Taylor & Francis CY - London AN - OPUS4-21452 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -