TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Fallstudie einer Offshore-Windenergieanlage T2 - VDI Wissensforum: Bauwerksmonitoring CY - Hamburg, Germany DA - 2013-04-17 PY - 2013 AN - OPUS4-28110 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Verfahren der Lebenszykluskurven auf der Grundlage der Tragwerkszuverlässigkeit T2 - VDI Wissensforum: Bauwerksmonitoring CY - Hamburg, Germany DA - 2013-04-17 PY - 2013 AN - OPUS4-28112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Faber, M.H. ED - Deodatis, G. ED - Ellingwood, B.R. ED - Frangopol, D.M. T1 - Assessing the value of structural health monitoring N2 - Structural Health Monitoring (SHM) systems are designed for assisting owners and operators with information and forecasts concerning the fitness for purpose of structures and building systems. The benefit associated with the implementation of SHM may in some cases be intuitively anticipated or proven by past experiences but in general there appears to be no rational or systematic approach for assessing the value of SHM systems a-priory to their implementation. The present paper addresses the assessment of the value of SHM with basis in structural risk assessments and the Bayesian pre-posterior decision analysis. The quantification of the value of SHM builds upon the quantification of the value of information (VoI) or rather the benefit of monitoring. The suggested approach involves a probabilistic representation of the loads and environmental conditions acting on structures as well as their responses and performances over their life-cycle. In addition, the quality of monitoring and the performance of possible remedial actions triggered by monitoring results are modeled probabilistically.The consequences accounted for, in principle include all consequences associated with the performance of the structure over its life-cycle as well as the costs associated with monitoring and possible remedial actions. The suggested approach is illustrated through two case studies concerning the monitoring of welded details in steel structures subjected to fatigue loading. The case studies address the effect of the uncertainty associated with the performance of SHM on the value of SHM. Moreover, in order to illustrate the potential of the application of approach for monitoring of structural systems an optimal strategy for SHM is determined for a system comprised of three welded details. T2 - 11th International conference on structural safety and reliability - Safety, reliability, risk and life-cycle performance of structures and infrastructures CY - New York, USA DA - 16.06.2013 PY - 2013 SN - 978-1-138-00086-5 SN - 978-1-315-88488-2 SP - 1 EP - 8 PB - CRC Press CY - Leiden, The Netherlands AN - OPUS4-28728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Lanata, F. ED - Deodatis, G. ED - Ellingwood, B.R. ED - Frangopol, D.M. T1 - Risk and operation optimized damage detection and inspection systems T2 - 11th International conference on structural safety and reliability - Safety, reliability, risk and life-cycle performance of structures and infrastructures CY - New York, USA DA - 16.06.2013 PY - 2013 SN - 978-1-138-00086-5 SN - 978-1-315-88488-2 SP - 1 EP - 10 PB - CRC Press CY - Leiden, The Netherlands AN - OPUS4-28729 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Schneider, Ronald T1 - Reliability-based inspection planning with application to orthotropic bridge deck structures subjected to fatigue T2 - IRIS Final Conference CY - Vienna, Austria DA - 2012-03-19 PY - 2012 AN - OPUS4-25701 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Döhler, M. ED - Del Grosso, A.E. ED - Basso, P. T1 - Structural reliability updating with stochastic subspace damage detection information T2 - EACS 2012 - Smart structures - 5th European conference on structural control CY - Genoa, Italy DA - 2012-06-18 KW - Stochastic subspace KW - Structural reliability KW - Bayesian updating KW - Probability od detection PY - 2012 SN - 978-88-95023-13-7 IS - Paper #008 SP - 1 EP - 12 PB - Erredi Grafiche Editoriali AN - OPUS4-26181 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Döhler, M. T1 - Structural Reliability Updating with Stochastic Subspace Damage Detection Information T2 - EACS 2012: 5th European Conference on Structural Control CY - Genoa, Italy DA - 2012-06-17 PY - 2012 AN - OPUS4-26159 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Straub, D. A1 - Fischer, J. T1 - Intelligente Bauwerke - Zuverlässigkeitsbasierte Bewertung von Brückenbauwerken unter Berücksichtigung von Inspektions- und Überwachungsergebnissen T2 - Workshop Intelligente Bauwerke CY - Bergisch Gladbach, Germany DA - 2012-06-26 PY - 2012 AN - OPUS4-26160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner T1 - Optimierung des Managements der Tragwerksintegrität für Offshore-Windenergieanlagen N2 - Dieser Artikel enthält aktuelle Forschungsergebnisse im Bereich des überwachungsgestützten Managements der Tragwerksintegrität. Das Management der Tragwerksintegrität hat zum Ziel, die Funktionalität eines Tragwerks während des gesamten Lebenszyklus durch Einhaltung der Zielzuverlässigkeiten sicherzustellen. Ausgehend von Forschungsergebnissen über die Charakteristik von Überwachungsverfahren und -daten im Rahmen von Zuverlässigkeitsanalysen, wird ein Ansatz vorgestellt, wie die erwarteten Kosten für das Management der Tragwerksintegrität durch Überwachungsverfahren optimiert werden können. Dazu wird eine Kosten-Nutzen-Analyse für den Lebenszyklus einer Gründungstruktur von Offshore-Windenergieanlagen durchgeführt. Im Rahmen der Bayes'schen Entscheidungstheorie werden durch eine Prä-posteriori-Entscheidungsanalyse die optimalen Entscheidungsparameter für den Entwurf eines Überwachungssystems bestimmt. Als Fallstudie wird ein Überwachungssystem für die Gründungsstruktur eines Multibrid-M5000-Prototyps konzipiert und die mögliche Reduktion der Risiken und erwarteten Betriebskosten quantifiziert. -------------------------------------------------------------------------------------------------------------------------------------------------------------------- This paper contains recent research results in the field of monitoring supported structural integrity management. The structural integrity management aims at ensuring the functioning of a structure throughout the life cycle by compliance with the target reliabilities. Building upon research results concerning the characteristics of monitoring techniques and data within the framework of reliability analyses, an approach is introduced for the optimisation of the expected structural integrity management costs by monitoring information. For this aim, a life cycle cost benefit analysis for offshore wind turbine support structures is formulated. The optimal monitoring decision parameters are then assessed utilizing the Bayesian pre-posterior decision theory. As a case study a monitoring system for a Multibrid M5000 offshore wind turbine prototype support structure is designed and possible reductions of the risks and expected costs are quantified. KW - Management der Tragwerksintegrität KW - Messunsicherheit KW - Tragwerkszuverlässigkeit KW - Bayes'sche Aktualisierung KW - Kosten-Nutzen-Analyse KW - Lebenszyklus KW - Structural integrity management KW - Measurement uncertainty KW - Structural reliability KW - Bayesian updating KW - Cost-benefit analysis KW - Life cycle KW - Bauwerkserhaltung/Sanierung - Maintenance and Repair KW - Meerestechnik - Offshore engineering KW - Stahlbau - Steel construction PY - 2012 U6 - https://doi.org/10.1002/bate.201200021 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 89 IS - 8 SP - 525 EP - 532 PB - Ernst & Sohn CY - Berlin AN - OPUS4-26313 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner T1 - Ultimate limit state model basis for assessment of offshore wind energy converters N2 - This paper establishes the model basis regarding the ultimate limit state consisting of structural, loading, and probabilistic models of the support structure of offshore wind energy converters together with a sensitivity study. The model basis is part of a risk based assessment and monitoring framework and will be applied for establishing the 'as designed and constructed' reliability as prior information for the assessment and as a basis for designing a monitoring system. The model basis is derived considering the constitutive physical equations and the methodology of solving these which then in combination with the ultimate limit state requirements leads to the specific constitutive relations. As a result finite element models based on shell elements incorporating a structural and a loading model are introduced and described in detail. Applying these models the ultimate capacity of the support structure and the tripod structure are determined with a geometrically and materially nonlinear finite element analysis. The observed failure mechanisms are the basis for the definition of the ultimate limit state responses. A probabilistic model accounting for the uncertainties involved is derived on the basis of literature review and measurement data from a prototype Multibrid M5000 support structure. In combination with the developed structural and loading models, sensitivity analyses in regard to the responses are performed to enhance the understanding and to refine the developed models. To this end, as the developed models necessitate substantial numerical efforts for the probabilistic response analysis predetermined designs of numerical experiments are applied for the calculation of the sensitivities using the Spearman rank correlation coefficient. With this quantification of the sensitivity of the random variables on the responses including nonlinearity the refinement of the model is performed on a quantitative basis. KW - Condition monitoring KW - Failure analysis KW - Finite element analysis KW - Offshore installations KW - Probability KW - Risk analysis KW - Shells (structures) KW - Structural engineering KW - Wind power KW - Model basis KW - Offshore wind KW - Support structure KW - Sensitivity KW - Ultimate limit state PY - 2012 U6 - https://doi.org/10.1115/1.4004513 SN - 0892-7219 VL - 134 IS - 3 SP - 031904-1 - 031904-9 CY - Fairfield, NJ AN - OPUS4-26358 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Thöns, Sebastian T1 - Monitoring based condition assessment of offshore wind turbine support structures KW - Structural condition assessment KW - Monitoring KW - Offshore wind turbine KW - Measurement uncertainty KW - Cost benefit analysis KW - Structural integrity management PY - 2012 UR - http://e-collection.library.ethz.ch/eserv/eth:6828/eth-6828-01.pdf U6 - https://doi.org/10.3929/ethz-a-009753058 SN - 0257-6821 IS - 345 SP - 1 EP - 149 PB - vdf Hochschulverlag AG, Zürich CY - Basel AN - OPUS4-28280 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian T1 - Monitoring Supported Structural Integrity Management T2 - IRIS Summer Academy CY - Zell am See, Austria DA - 2011-09-04 PY - 2011 AN - OPUS4-24546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Überwachungssysteme zur Unterstützung des Managements der Bauwerksintegrität von Brücken T2 - Vortrag an der Bundesanstalt für Straßenwesen CY - Bergisch Gladbach, Germany DA - 2011-08-17 PY - 2011 AN - OPUS4-24547 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian T1 - Inspection and monitoring supported structural integrity management T2 - BAM-DTU Workshop on Design and maintenance of support structures for Offshore Wind Converters CY - Copenhagen, Denmark DA - 2011-10-25 PY - 2011 AN - OPUS4-24734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian T1 - Structural reliability assessment and integrity management optimisation T2 - BAM-DTU Workshop on Design and maintenance of support structures for Offshore Wind Converters CY - Copenhagen, Denmark DA - 2011-10-25 PY - 2011 AN - OPUS4-24735 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Grasse, Fabian A1 - Trappe, Volker A1 - Thöns, Sebastian A1 - Said, Samir ED - De Roeck, G. ED - Degrande, G. ED - Lombaert, G. ED - Müller, G. T1 - Structural health monitoring of wind turbine blades by strain measurement and vibration analysis N2 - Wind turbine blades have to withstand a high number of load cycles in mostly hard weather conditions over 20 years. In a research project BAM and several partners have designed, evaluated and tested a condition monitoring system for all parts of a wind turbine. At a rotorblade with a length of 58 m fibre bragg grating sensors were applied for in-service strain measurement. Additionally a complex test rig was designed to enable real biaxial loading conditions at a representative test rotor blade to simulate the mechanical loading conditions in the lab. In this test blade with a length of 8 m also fibre bragg grating sensors were implemented to determine their influences for the structure and the condition monitoring system. Vibration measurements were carried out at different test phases. The results were compared with finite element strain and modal analysis. T2 - EURODYN 2011 - 8th International conference on structural dynamics CY - Leuven, Belgium DA - 04.07.2011 KW - Rotor blade KW - Test blade KW - Modal analysis KW - Condition monitoring PY - 2011 SN - 978-90-760-1931-4 IS - MS25 Tue SP - 3490 EP - 3497 AN - OPUS4-25076 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rücker, Werner A1 - Lüddecke, Falk A1 - Thöns, Sebastian T1 - Tragverhalten von Offshore Gründungskonstruktionen - Rechnerische und messtechnische Untersuchungen N2 - Dieser Artikel enthält eine Zusammenfassung von Ergebnissen des Forschungsverbundvorhabens 'OGOWIN: Optimierung aufgelöster Gründungsstrukturen für Offshore-Windenergieanlagen hinsichtlich Materialeinsatz, Montageablauf und neuer Fertigungsverfahren'. Die Ergebnisse umfassen (1) eine Untersuchung des dynamischen Verhaltens der verschiedenen Gründungsvarianten Monopile, Tripod und Jacket, (2) die Ermittlung einer Wöhlerlinie für den Grundwerkstoff eines Stahlgussknotens, (3) die Ermittlung der Traglast eines Stahlgussknotens in einem 1:1-Versuch sowie (4) Berechnungen zur Form- und Materialoptimierung. Zur Überwachung der Gebrauchstauglichkeit während des Betriebes wurden relevante Parameter hinsichtlich ihres Einflusses auf die ersten Eigenfrequenzen der o. g. Gründungskonstruktionen rechnerisch untersucht. Untersuchungen der Ermüdungsfestigkeit und die erstmalige experimentelle Ermittlung der Traglast eines Gussknotens tragen zu einem optimierten Entwurf durch genaue Kenntnis des Materialverhaltens und der höchstbeanspruchten Bereiche bei. Darüber hinaus konnte gezeigt werden, dass eine geometrische Optimierung des Stahlgussknotens unter konstruktiven Randbedingungen zu einer Verringerung des Materialaufwandes bzw. zu einer Erhöhung der Traglast führen kann. -------------------------------------------------------------------------------------------------------------------------------------- This paper contains a summary of the joint research project 'OGOWIN: Optimisation of support structures for offshore wind turbines regarding the material consumption, the construction and production sequence as well as new production methodologies'. The results comprise (1) a modal analyses of various types of offshore wind turbine support structures, (2) the fatigue strength testing of the cast steel material, (3) a large scale ultimate capacity test of a cast steel tube connection and (4) an optimisation of the tube connection aiming at material and stress reduction. The sensitivity of the relevant parameters on the first natural frequencies was quantified and the most influencing parameters were identified. The analyses of the fatigue strength and of the ultimate capacity of the cast steel tube connection support an optimised design by precise knowledge of the failure mechanisms and material behaviour. Moreover, it is shown that optimising the cast steel node can reduce the material use and stress concentration. KW - Gussknoten KW - Ermüdung KW - Traglast KW - Optimierung KW - Cast steel tube connection KW - Fatigue KW - Ultimate capacity KW - Optimisation KW - Meerestechnik KW - Offshore engineering KW - Stahlbau KW - Steel construction KW - Neue Verfahren/Versuchstechnik KW - New Processes/Experimental Techniques PY - 2012 U6 - https://doi.org/10.1002/bate.201200022 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 89 IS - 12 SP - 821 EP - 830 PB - Ernst & Sohn CY - Berlin AN - OPUS4-27426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Rohrmann, Rolf A1 - Rücker, Werner A1 - Faber, M.H. T1 - Bewertung der Ermüdungsfestigkeit von Baustrukturen in Offshore-Windenergie-Anlagen N2 - Das Bauwerk einer Windenergieanlage dient der Sicherstellung der Energieproduktion. Eine entsprechende Zuverlässigkeit der Struktur und deren permanente Bewertung und Unterhaltung ist dazu notwendig. In diesem Beitrag werden Möglichkeiten der Bewertung des für die Struktur wichtigen Schädigungsmechanismus Ermüdung sowie dessen Überwachung in Zusammenhang mit Schädigungsindikatoren aufgezeigt. Dabei wird auf strukturmechanische, werkstoffmechanische und probabilistische Modelle sowie auf Messdaten eines Prototyps einer OWEA zurückgegriffen. Ausgehend von der gesamtdynamischen Berechnung wird die Zuverlässigkeit gemäß der Auslegung für den Schädigungsmechanismus Ermüdung durch ein Wöhlerlinienmodell berechnet. Damit werden ermüdungssensible Komponenten der Struktur identifiziert. Schädigungsindikatoren zur Überwachung der Ermüdungsfestigkeit werden auf Grundlage schädigungs-äquivalenter Dehnungen vorgestellt. Fatigue assessment of support structures for offshore wind energy converters. The structure of wind energy converters secures a reliable energy production. Hence an adequate reliability of the structure and additionally permanent assessment and maintenance is required. Within this paper methods for the assessment of the important damage mechanism fatigue in combination with monitoring of the fatigue reliability utilizing damage indicators are proposed. These methods comprise structural system, material degradation and probabilistic models as well as monitoring data of an offshore wind energy converter prototype. The structural reliability of the structure as designed is calculated based on an overall dynamic analysis using a SN-approach. Herewith fatigue sensitive components are identified. Damage indicators for monitoring the fatigue reliability based on damage equivalent strains are presented. KW - Bewertung KW - Offshore-Windenergie KW - Ermüdung KW - Strukturspannungskonzept KW - Zuverlässigkeit KW - Schadensindikatoren KW - Integrated Monitoring System KW - Damage Identification KW - Load Monitoring KW - Wind turbines PY - 2008 U6 - https://doi.org/10.1002/stab.200810076 SN - 0038-9145 SN - 1437-1049 SN - 0932-6375 VL - 77 IS - 9 SP - 630 EP - 638 PB - Ernst CY - Berlin AN - OPUS4-17977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner T1 - Anwendung stochastischer Methoden zur Zustandsbewertung von Offshore-Windenergieanlagen T2 - Vortrag am Fachgebiet Statik und Dynamik CY - Berlin, Germany DA - 2008-02-07 PY - 2008 AN - OPUS4-16512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rohrmann, Rolf A1 - Rücker, Werner A1 - Thöns, Sebastian T1 - Integrated Monitoring Systems for Offshore Wind Turbines T2 - 6th International Workshop on Structural Health Monitoring CY - Stanford, USA DA - 2007-09-11 KW - Integrated Monitoring System KW - Damage Identification KW - Load Monitoring KW - Wind turbines PY - 2007 SP - 1 EP - 8 AN - OPUS4-16280 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -