TY - CONF A1 - Thöns, Sebastian A1 - Faber, M.H. ED - Deodatis, G. ED - Ellingwood, B.R. ED - Frangopol, D.M. T1 - Assessing the value of structural health monitoring N2 - Structural Health Monitoring (SHM) systems are designed for assisting owners and operators with information and forecasts concerning the fitness for purpose of structures and building systems. The benefit associated with the implementation of SHM may in some cases be intuitively anticipated or proven by past experiences but in general there appears to be no rational or systematic approach for assessing the value of SHM systems a-priory to their implementation. The present paper addresses the assessment of the value of SHM with basis in structural risk assessments and the Bayesian pre-posterior decision analysis. The quantification of the value of SHM builds upon the quantification of the value of information (VoI) or rather the benefit of monitoring. The suggested approach involves a probabilistic representation of the loads and environmental conditions acting on structures as well as their responses and performances over their life-cycle. In addition, the quality of monitoring and the performance of possible remedial actions triggered by monitoring results are modeled probabilistically.The consequences accounted for, in principle include all consequences associated with the performance of the structure over its life-cycle as well as the costs associated with monitoring and possible remedial actions. The suggested approach is illustrated through two case studies concerning the monitoring of welded details in steel structures subjected to fatigue loading. The case studies address the effect of the uncertainty associated with the performance of SHM on the value of SHM. Moreover, in order to illustrate the potential of the application of approach for monitoring of structural systems an optimal strategy for SHM is determined for a system comprised of three welded details. T2 - 11th International conference on structural safety and reliability - Safety, reliability, risk and life-cycle performance of structures and infrastructures CY - New York, USA DA - 16.06.2013 PY - 2013 SN - 978-1-138-00086-5 SN - 978-1-315-88488-2 SP - 1 EP - 8 PB - CRC Press CY - Leiden, The Netherlands AN - OPUS4-28728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner T1 - Ultimate limit state model basis for assessment of offshore wind energy converters N2 - This paper establishes the model basis regarding the ultimate limit state consisting of structural, loading, and probabilistic models of the support structure of offshore wind energy converters together with a sensitivity study. The model basis is part of a risk based assessment and monitoring framework and will be applied for establishing the 'as designed and constructed' reliability as prior information for the assessment and as a basis for designing a monitoring system. The model basis is derived considering the constitutive physical equations and the methodology of solving these which then in combination with the ultimate limit state requirements leads to the specific constitutive relations. As a result finite element models based on shell elements incorporating a structural and a loading model are introduced and described in detail. Applying these models the ultimate capacity of the support structure and the tripod structure are determined with a geometrically and materially nonlinear finite element analysis. The observed failure mechanisms are the basis for the definition of the ultimate limit state responses. A probabilistic model accounting for the uncertainties involved is derived on the basis of literature review and measurement data from a prototype Multibrid M5000 support structure. In combination with the developed structural and loading models, sensitivity analyses in regard to the responses are performed to enhance the understanding and to refine the developed models. To this end, as the developed models necessitate substantial numerical efforts for the probabilistic response analysis predetermined designs of numerical experiments are applied for the calculation of the sensitivities using the Spearman rank correlation coefficient. With this quantification of the sensitivity of the random variables on the responses including nonlinearity the refinement of the model is performed on a quantitative basis. KW - Condition monitoring KW - Failure analysis KW - Finite element analysis KW - Offshore installations KW - Probability KW - Risk analysis KW - Shells (structures) KW - Structural engineering KW - Wind power KW - Model basis KW - Offshore wind KW - Support structure KW - Sensitivity KW - Ultimate limit state PY - 2012 U6 - https://doi.org/10.1115/1.4004513 SN - 0892-7219 VL - 134 IS - 3 SP - 031904-1 - 031904-9 CY - Fairfield, NJ AN - OPUS4-26358 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner A1 - Rohrmann, Rolf ED - Martorell, S. ED - et al., T1 - Assessment and monitoring of reliability and robustness of offshore wind energy converters T2 - ESREL 2008 CY - Valencia, Spain DA - 2008-09-22 KW - Structural reliability KW - Robustness KW - Monitoring KW - Risk KW - Wind energy converter PY - 2008 SN - 978-0-415-48513-5 SP - 1567 EP - 1572 PB - Taylor & Francis CY - London, UK AN - OPUS4-18565 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner T1 - Life cycle cost optimized monitoring systems for offshore wind turbine structures N2 - Monitoring information should be utilized to support optimal decisions. In this sense monitoring systems should be designed such as to optimize expected Life Cycle Costs. PY - 2013 SN - 978-3-200-03179-1 IS - Chapter 4 SP - 75 EP - 90 CY - Vienna, Austria AN - OPUS4-29103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Rücker, Werner A1 - Faber, M.H. T1 - Support structure reliability of offshore wind turbines utilizing an adaptive response surface method T2 - OMAE 2010 - 29th International conference on ocean, offshore and arctic engineering CY - Shanghai, China DA - 2010-06-06 PY - 2010 IS - OMAE2010-20546 SP - 1 EP - 10 AN - OPUS4-21666 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner T1 - Fatigue and serviceability limit state model basis for assessment of offshore wind energy converters N2 - This paper develops the models for the structural performance of the loading and probabilistic characterization for the fatigue and the serviceability limit states for the support structure of offshore wind energy converters. These models and a sensitivity study are part of a risk based assessment and monitoring framework and will be applied for establishing the 'as designed and constructed' reliability as prior information for the assessment and the design of monitoring systems. The constitutive physical equations are introduced in combination with the fatigue and serviceability limit state requirements as the starting point for the development of the structural performance and loading models. With these models introduced in detail, several modeling aspects for both limit states are analyzed. This includes analyses of the influence on the hot spot stresses by applying a contact formulation for the pile guide brace connection and the application of a finite element formulation using solid elements. Further, the comparison of the natural frequencies of a discrete rotor model with a continuous rotor model is documented. To account for uncertainties associated with the structural and loading models, a probabilistic model is derived on the basis of literature review and measurement data from a prototype Multibrid M5000 support structure. The sensitivity study is based on the calculation of a nonlinear coefficient of correlation in conjunction with predetermined designs of experiments. This is conducted by a systematic analysis of the influence of the random variables on limit state responses and hence on the structural reliability. Integrating the analyses and sensitivity studies of the fatigue and serviceability limit state models developed in this paper as well as the ultimate limit state models in Thöns et al. ('Ultimate Limit State Model Basis for Assessment of Offshore Wind Energy Converters,' ASME J. Offshore Mech. Arct. Eng.), the model basis for the assessment is completed. The process of establishing and analyzing such a model basis contributes to a detailed understanding of the deterministic and probabilistic characteristics of the structure and provides valuable insights in regard to the significance of available data. KW - Fatigue KW - Finite element analysis KW - Rotors KW - Wind power PY - 2012 U6 - https://doi.org/10.1115/1.4004514 SN - 0892-7219 VL - 134 IS - 3 SP - 031905-1 - 031905-10 CY - Fairfield, NJ AN - OPUS4-26437 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Faber, M.H. A1 - Thöns, Sebastian ED - Miraglia, S. ED - Vrouwenvelder, A.C.W.M. ED - Steenbergen, R.D.J.M. ED - Van Gelder, P.H.A.J.M. T1 - On the value of structural health monitoring T2 - 22nd ESREL conference - Safety, reliability and risk analysis: Beyond the horizon CY - Amsterdam, The Netherlands DA - 2013-09-29 PY - 2014 SN - 978-1-138-00123-7 SP - 2535 EP - 2544 PB - Taylor & Francis AN - OPUS4-29894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thöns, Sebastian A1 - Faber, M.H. A1 - Rücker, Werner ED - Faber, M.H. ED - Köhler, J. ED - Nishijima, K. T1 - On the utilization of monitoring data in an ultimate limit state reliability analysis N2 - This paper describes a structural reliability analysis utilizing monitoring data in the ultimate limit state with consideration of the uncertainties of the monitoring procedure. For this purpose the uncertainties of the monitoring data are modeled utilizing a new framework for the determination of measurement uncertainties. The approach is based on a process equation and Statistical models of observations for the derivation of a posterior measurement uncertainty by Bayesian updating. This facilitates the quantification of a measurement uncertainty using all available data of the measurement process. For the reliability analysis in the ultimate limit state, monitoring data can be utilized as a loading model Information and as proof loading, i.e. resistance model Information. Both approaches are discussed with generic examples and it is shown that the modeling of monitoring data in a reliability analysis can result in a reduction of uncertainties and as a consequence in the reduction of the probability of failure. Furthermore, the proof loading concept is developed further to account for the uncertain characteristic of proof loading due to the measurement uncertainties which is consistent with the framework for the determination of measurement uncertainties. These approaches and findings can be utilized for the assessment of structures for life cycle extension and the design of monitoring Systems. T2 - ICASP 11 - 11th International conference on applications of statistics and probability in civil engineering CY - Zurich, Switzerland DA - 01.08.2011 PY - 2011 SN - 978-0-415-66986-3 SP - 1762 EP - 1769 PB - Taylor & Francis CY - London AN - OPUS4-24292 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -