TY - RPRT A1 - Culleton, L.P. A1 - Brown, A. A1 - Murugan, A. A1 - Van der Veen, A. A1 - Van Osselen, D. A1 - Ziel, P. R. A1 - Li, J. A1 - Tuma, Dirk A1 - Schulz, Gert A1 - Näther, Stephanie A1 - Arrhenius, K. A1 - Kühnemuth, D. A1 - Beránek, J. A1 - Fuko, J. A1 - Val'ková, M. T1 - Results of an international comparison on the analysis of real nonconventional energy gases N2 - The requirement for a metrological infrastructure to ensure the interchangability of 'nonconventional’ energy gases within existing European infrastructure1 was the driving force behind the work undertaken in the three-year EMRP Characterisation of energy gases project EMRP ENG01 (June 2010 - May 2013). As part of work package one of the project, Standards and methods were used to perform composition and impurity measurements on samples of real energy gases collected from around Europe. The aim of this study was to compare the results obtained from different labs, and thereby provide an evaluation of the labs’ capabilities and provide insight into the feasibility of different analytical methodologies for use with future measurements. KW - Energy gases KW - Real samples KW - Sampling KW - Analysis PY - 2013 SN - 1754-2928 IS - July SP - 1 EP - 28 PB - Queen's Printer and Controller of HMSO CY - Teddington, Middlesex, UK AN - OPUS4-29449 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Traulsen, C. H.-H. A1 - Kunz, V. A1 - Heinrich, Thomas A1 - Richter, S. A1 - Holzweber, Markus A1 - Schulz, A. A1 - von Krbek, L. K. S. A1 - Scheuschner, U. T. J. A1 - Poppenberg, J. A1 - Unger, Wolfgang A1 - Schalley, C. A. T1 - Synthesis and coordinative layer-by-layer deposition of pyridine-functionalized gold nanoparticles and tetralactam macrocycles on silicon substrates N2 - Coordination chemistry was applied to deposit pyridine-functionalized gold nanoparticles on silicon substrates. The particles were synthesized through the Brust/Schiffrin route with a subsequent ligand exchange reaction yielding well-defined particles of two different sizes. Multilayer deposition was carried out on a pyridine-terminated SAM, anchored on a hydroxyl-terminated silicon surface. Analogously, Hunter/Vögtle-type tetralactam macrocycle multilayers were deposited as well as mixed layers containing both either in an alternating sequence or as a macrocycle multilayer with a terminating nanoparticle layer. These composite layers were examined with respect to their ability to bind squaraine axles in the macrocycle cavities. The amount of guest bound is higher for the composite layer with alternating macrocycles and nanoparticles. KW - Layer-by-layer deposition KW - Functionalized Au nanoparticles KW - SEM KW - TEM KW - DLS KW - XPS KW - NEXAFS KW - ToF-SIMS KW - IR KW - UV-vis PY - 2013 DO - https://doi.org/10.1021/la403222x SN - 0743-7463 SN - 1520-5827 VL - 29 IS - 46 SP - 14284 EP - 14292 PB - American Chemical Society CY - Washington, DC AN - OPUS4-29699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Habib, Abdel Karim A1 - Bonow, G. A1 - Kroll, A. A1 - Hegenberg, J. A1 - Schmidt, L. A1 - Barz, T. A1 - Schulz, D. T1 - Forschungsprojekt RoboGasInspector: Gaslecksuche mit autonomen mobilen Robotern N2 - Im Rahmen des Förderprogramms AUTONOMIK des Bundesministeriums für Wirtschaft und Technologie wurde in einem Konsortium aus neun Projektpartnern der Prototyp eines autonomen mobilen Roboters zur Gaslecksuche in ausgedehnten Industrieanlagen entwickelt. Anhand verschiedenartiger Sensorik zur Selbstlokalisation und Navigation wurde die autonome Beweglichkeit des Systems für beliebige Anlagen realisiert, mit der Option anhand von Teleoperation manuell in den Prozess einzugreifen. Ausgestattet mit Video- und Gasfernmesstechnik ist der Roboter imstande, Inspektionsaufgaben in Industrieanlagen durchzuführen, ohne in mögliche Gefahrenbereiche direkt einfahren zu müssen und ohne, dass ein Mensch vor Ort anwesend ist. Der Roboter kann zur routinemäßigen Inspektion von Anlagen oder zur gezielten Untersuchung spezifischer Anlagenteile eingesetzt werden. Dank der verwendeten Fernmesstechnik können auch Anlagenteile inspiziert werden, die aufgrund ihrer beschränkten Zugänglichkeit mittels herkömmlicher Messtechnik nur schwer zu inspizieren sind. KW - Lecksuche KW - Roboter KW - Gasausbreitung KW - Simulation PY - 2013 SN - 2191-0073 VL - 3 IS - 5 SP - 10 EP - 15 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-29586 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -