TY - CONF A1 - Hartmann, S. A1 - Shaporin, A. A1 - Hermann, S. A1 - Bonitz, J. A1 - Heggen, M. A1 - Meszmer, P. A1 - Sturm, Heinz A1 - Hölck, O. A1 - Blaudeck, T. A1 - Schulz, S. E. A1 - Mehner, J. A1 - Gessner, T. A1 - Wunderle, B. T1 - Towards nanoreliability of CNT-based sensor applications: Investigations of CNT-metal interfaces combining molecular dynamics simulations, advanced in situ experiments and analytics N2 - In this paper we present results of our recent efforts to understand the mechanical interface behaviour of single-walled carbon nanotubes (CNTs) embedded in metal matrices. We conducted experimental pull-out tests of CNTs embedded in Pd or Au and found Maximum forces in the range 10 - 102 nN. These values are in good agreement with forces obtained from molecular Dynamics simulations taking into account surface functional Groups (SFGs) covalently linked to the CNT material. The dominant failure mode in experiment is a CNT rupture, which can be explained with the presence of SFGs. To qualify the existence of SFGs on our used CNT material, we pursue investigations by means of fluorescence labeling of surface species in combination with Raman imaging. We also report of a tensile test system to perform pull-out tests inside a transmission electron microscope to obtain in situ images of CNT-metal interfaces under mechanical loads at the atomic scale. T2 - 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems CY - Budapest, Hungary DA - 20.4.2015 KW - Carbon nanotube CNT KW - Metal matrix KW - Pull-out test KW - Molecular dynamics simulation KW - Surface functional groups KW - Fluorescence labeling KW - Raman imaging KW - Tensile test inside a TEM PY - 2015 SN - 978-1-4799-9950-7 VL - 2015 SP - 1 EP - 8 PB - IEEE AN - OPUS4-37625 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulz, T. A1 - Reimann, T. A1 - Bochmann, A. A1 - Vogel, A. A1 - Capraro, B. A1 - Mieller, Björn A1 - Teichert, S. A1 - Töpfer, J. T1 - Sintering behavior, microstructure and thermoelectric properties of calcium cobaltite thickfilms for transversal thermoelectric multilayer generators N2 - The sintering behavior and the thermoelectric performance of Ca3Co4O9 multilayer laminates were studied, and a multilayer thermoelectric generator was fabricated. Compacts and multilayer samples with anisotropic microstructure and residual porosity were obtained after conventional sintering at 920 °C, whereas dense and isotropic multilayer samples were prepared by firing at 1200 °C and reoxidation at 900 °C. A hot-pressed sample has a dense and anisotropic microstructure. Samples sintered at 920 °C exhibit low electrical conductivity due to the low density, whereas the Seebeck coefficient is not sensitive to preparation conditions. However, thermal conductivity of multilayers is very low, and, hence acceptable ZT values are obtained. A ransversal multilayer thermoelectric generator (TMLTEG) was fabricated by stacking layers of Ca3Co4O9 green tapes, AgPd conductor printing, and co-firing at 920 °C. The TMLTEG has a power output of 3 mW at ΔT =200 K in the temperature interval of 25 °C to 300 °C. KW - Thermoelectric oxide KW - Calcium cobaltite KW - Pressure-assisted sintering KW - Multilayer PY - 2018 DO - https://doi.org/10.1016/j.jeurceramsoc.2017.11.017 SN - 0955-2219 SN - 1873-619X VL - 38 IS - 4 SP - 1600 EP - 1607 PB - Elsevier Ltd. AN - OPUS4-43983 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Orgzall, I. A1 - Emmerling, Franziska A1 - Schulz, B. A1 - Franco, O. T1 - High-pressure studies on molecular crystals - relations between structure and high-pressure behavior N2 - This paper summarizes attempts to understand structure–property relationships for a large class of aromatic diphenyl-1,3,4-oxadiazole molecules. Starting from the investigation of the crystal structure several common packing motifs as well as characteristic differences are derived. Many different molecules show a rather planar conformation in the solid state. A stronger intermolecular twist is only observed for compounds with substituents occupying the ortho-positions of the phenyl rings. Most crystal structures are characterized by the formation of stacks leading to intense π–π acceptor–donor interactions between oxadiazole and phenyl rings. High-pressure investigations result in a soft compression behavior typical for organic molecular crystals. The bulk behavior may be described by the Murnaghan equation of state with similar coefficients (bulk modulus and its pressure derivative) for nearly all investigated compounds but also for related substances. The compression shows a strong anisotropy resulting from the specific features and packing motifs of the crystal structure. This is clearly indicated by a corresponding strain analysis. Additionally to the crystal structure the Raman spectrum was also investigated under increasing pressure. The different pressure behavior of external and internal modes reflects the difference between intra- and intermolecular interactions. KW - Diphenyl-1,3,4-oxadiazole KW - Crystal structure KW - High pressure investigations KW - Equation of state KW - Strain analysis KW - Raman investigations PY - 2008 DO - https://doi.org/10.1088/0953-8984/20/29/295206 SN - 0953-8984 SN - 1361-648X VL - 20 SP - 295206-1 - 295206-15 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-17784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Díez, I. A1 - Emmerling, Franziska A1 - Malz, Frank A1 - Jäger, Christian A1 - Schulz, B. A1 - Orgzall, I. T1 - Origin of templating processes in polypyrrole synthesis N2 - The supermolecular mechanism of the template-mediated oxidative polymerization of pyrrole is investigated in detail. It is shown for the first time that 2,5-bis(pyrrol-2-yl)pyrrolidyl complexes with aromatic sulfonic acids such as %#946;-naphtalenesulfonic acid or para-toluenesulfonic acid are formed in the early polymerization step. The crystalline acid–base complexes are isolated and their crystal structures are analyzed. A 2,5-bis(pyrrol-2-yl)pyrrolidyl cation is common to both complexes and forms an inner salt with the sulfonic acid anion. As concluded from NMR investigations the synthesis using sulfonic acids results in a high stereo selectivity with respect to the trans conformation of the pyrrolidyl ring compared with the classical synthesis routine of this compound using hydrochloric acid. The needle-like crystals of the complexes act as hard templates during the next step of the polymerization and result in tubular morphologies of the polypyrrole. KW - Polypyrrole KW - Pyrrole complex PY - 2008 DO - https://doi.org/10.1016/j.matchemphys.2008.05.057 SN - 0254-0584 VL - 112 IS - 1 SP - 154 EP - 161 PB - Elsevier CY - Amsterdam AN - OPUS4-17859 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Leitner, M.B. A1 - Schinkel, G. A1 - Springer, J. A1 - Ruhmann, R. A1 - Schulz, Günter A1 - Niesel, F.T. T1 - Methacrylate copolymers containing azoanthraquinone units: synthesis by direct copolymerization and by polymer-analogous esterfication reaction PY - 1997 SN - 1381-5148 SN - 1873-166X VL - 33 SP - 137 PB - Elsevier CY - Amsterdam AN - OPUS4-2155 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -