TY - CONF A1 - Schneider, Thomas T1 - On the tribological behaviour of a-C:H coatings under oscillatory sliding against ceramic and metallic counter bodies T2 - EUROMAT 2005 CY - Prague, Czech Republic DA - 2005-09-05 PY - 2005 AN - OPUS4-10965 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Thomas T1 - Optimierte MoS2-PVD-Schichten für wechselnde Umgebungsbedingungen T2 - Tribologie-Fachtagung 2012 CY - Göttingen, Germany DA - 2012-09-24 PY - 2012 AN - OPUS4-26578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Thomas T1 - Tribological behavior of MoS2 in hydrogen environment T2 - 5. World Tribology Congress CY - Turin, Italy DA - 2013-09-08 PY - 2013 AN - OPUS4-28904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Österle, Werner A1 - Dmitriev, A.I. A1 - Orts Gil, Guillermo A1 - Schneider, Thomas A1 - Ren, H. A1 - Sun, X. T1 - Verification of nanometre-scale modelling of tribofilm sliding behaviour N2 - A model based on movable cellular automata has been applied to study the sliding behaviour of tribofilms formed during automotive braking. Since it is not possible yet to determine the composition of real tribofilms quantitatively, final verification of modelling results is needed. This was done by preparing artificial third bodies with compositions and nanostructures matching the ones assumed for modelling. Pin-on-disc tests were performed while applying the artificial third bodies to the contact. The results revealed that not only the structure of the third body but also the amount of the applied normal pressure determines the COF obtained by modelling and that much better correlation between experimental and modelling results was obtained while assuming high normal pressures at asperity contacts. KW - Automotive braking KW - Third body KW - Modelling KW - Sliding simulation PY - 2013 DO - https://doi.org/10.1016/j.triboint.2013.02.018 SN - 0301-679X VL - 62 SP - 155 EP - 162 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-27946 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Thomas A1 - Meine, Kerstin A1 - Spaltmann, Dirk T1 - Influence of Hydrogen Adsorption on the Friction of Silicon T2 - WE-Heraeus Seminar Integrating Friction and Wear Research CY - Ilmenau, Germany DA - 2002-05-27 PY - 2002 SP - 63 AN - OPUS4-1450 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meine, Kerstin A1 - Schneider, Thomas A1 - Spaltmann, Dirk A1 - Santner, Erich T1 - The influence of roughness on friction - Part I: The influence of a single step KW - Tribology KW - Roughness KW - Friction force KW - Elastic deformation PY - 2002 SN - 0043-1648 VL - 253 SP - 725 EP - 732 PB - Elsevier CY - Amsterdam AN - OPUS4-1580 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meine, Kerstin A1 - Schneider, Thomas A1 - Spaltmann, Dirk A1 - Santner, Erich T1 - The influence of roughness on friction - Part II: The influence of multiple steps KW - Tribology KW - Roughness KW - Friction force KW - Elastic deformation PY - 2002 SN - 0043-1648 VL - 253 SP - 733 EP - 738 PB - Elsevier CY - Amsterdam AN - OPUS4-1581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Witke, Klaus A1 - Klaffke, Dieter A1 - Schneider, Thomas A1 - Schreckenbach, J.P. T1 - Laser-damaging as a useful tool for materials characterization by Raman microscopy KW - Raman-Mikroskopie KW - Raman-Laser KW - Laserstrahlbearbeitung PY - 1999 SN - 0169-4332 SN - 1873-5584 VL - 151 IS - 1-2 SP - 33 EP - 39 PB - North-Holland CY - Amsterdam AN - OPUS4-709 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dorgerloh, Ute A1 - Becker, Roland A1 - Freeling, Finnian A1 - Scheurer, Marco A1 - Gökçe, Emine A1 - Strack, Katrin A1 - Sommerfeld, Thomas A1 - Sauer, Andreas A1 - Schneider, Jonas A1 - Härtel, Christoph A1 - Valkov, Vassil A1 - Moser, Lukas A1 - Geiß, Sabine A1 - Junginger, Sabine A1 - Schlittenbauer, Linda A1 - Suess, Elke A1 - Ruth, Katinka T1 - Standardising the quantification of trifluoroacetic acid in water: Interlaboratory validation trial using liquid chromatography-mass spectrometric detection (LC–MS/MS) N2 - The concentration of trifluoroacetic acid in surface and groundwaters and drinking water is subject of increasing concern. Since there is no standardised procedure available, German standardisation body DIN has initiated the first draft standard using liquid chromatography with tandem mass spectrometry (LC–MS/MS) after direct injection for the concentration range between ≥ 0.1 and 3 µg/L. Herein, the interlaboratory comparison as final validation step involving 12 expert laboratories from Germany and Switzerland is described. Two groundwaters, two surface waters, a drinking water, a rainwater, and two fortified groundwater samples displayed relative repeatability standard deviations between 3 and 7% and relative reproducibility standard deviation between 6 and 20% and were included in the draft standard DIN 38407-53. KW - TFA Trifluoroacetic acid KW - LC/MS-MS KW - Validation trial PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-632376 DO - https://doi.org/10.1007/s00769-025-01640-2 SN - 0949-1775 SP - 1 EP - 4 PB - Springer CY - Berlin AN - OPUS4-63237 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schneider, Thomas A1 - Santner, Erich T1 - Mikrotribologie: Stand der Forschung und Anwendungsmöglichkeiten - Literaturübersicht N2 - Aus der Literatur zusammengefasste experimentelle Untersuchungen mit der Methodik der Oberflächenphysik sowie den aufgeführten neuen Verfahren bilden den zentralen Teil, Ergänzend hierzu werden einige grundlegende theoretische Modelle sowie Simulationsrechnungen aus jüngerer Zeit vorgestellt. Ziel dieser Arbeit ist es, Werkstoffwissenschaftlern, Ingenieuren und Physikern eine Einführung in das relativ neue Forschungsgebiet " Mikrotribologie" zu geben und in einem größeren Kontext seinen Zusammenhang mit der (Makro-)Tribologie aufzuzeigen. T3 - BAM Forschungsberichtreihe - 187 PY - 1992 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-2635 SN - 978-3-89429-216-4 SN - 0938-5533 VL - 187 SP - 1 EP - 142 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -