TY - CONF A1 - Herrmann, Ralf A1 - Hille, Falk A1 - Pitters, S. A1 - Ramasetti, Eshwar Kumar A1 - Schneider, Ronald A1 - Wedel, F. A1 - Hindersmann, I. ED - Rogge, Andreas ED - Meng, Birgit T1 - Föderiertes Datenmanagement von Monitoringdaten aus Structural Health Monitoring Anwendungen und daraus gewonnenen Trainingsdaten bei Spannbetonbrücken N2 - Beim Structural Health Monitoring entstehen eine Vielzahl von Daten, Metadaten und Modellen mit hohem Wert für die Beurteilung des Bauwerkszustands und der Prognose von Veränderungen. Kontinuierlich anwachsende Datenbestände müssen nachhaltig geteilt, genutzt und über die Bauwerkslebensdauer archiviert werden. Dabei stellen die Vielfalt der Messaufgaben, die Heterogenität der Daten, die dezentrale Erfassung und z. T. der Umfang eine Herausforderung für die beteiligten Akteure dar. Für den Datentransfer der Monitoringdaten zwischen der Straßenbauverwaltung und den Monitoringausführenden wird ein flexibles Abstimmungsverfahren vorgeschlagen und ein Lösungskonzept für ein föderiertes Datenmanagement skizziert. Eine weitere Herausforderung stellt die bauwerksübergreifende Zusammenstellung von Trainingsdaten für konkrete KI-Anwendungen dar. T2 - 11. Jahrestagung des DAfStb mit 63. Forschungskolloquium der BAM Green Intelligent Building CY - Berlin, Germany DA - 16.10.2024 KW - Structural Health Monitoring PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612902 SN - 978-3-9818564-7-7 SP - 178 EP - 185 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-61290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hille, Falk A1 - Herrmann, Ralf A1 - Pitters, S. A1 - Hindersmann, I. A1 - Schneider, Ronald A1 - Wedel, F. ED - Rogge, Andreas ED - Meng, Birgit T1 - Leitfaden für den strategischen Einsatz von Monitoring an Straßenbrücken N2 - Für die Anwendung von Structural Health Monitoring (SHM) im Rahmen des Managements von Straßenbrü-cken wurde zur Unterstützung von Straßenbauverwaltungen, Ingenieurbüros, Bauunternehmen und weiteren Akteuren die Erstellung eines Leitfadens initiiert. Dieser Leitfaden stellt typische Anwendungsfälle für Monito-ring vor und schlägt für diese bewährte Herangehensweisen vor. Darüber hinaus bietet der Leitfaden Empfeh-lungen für Ausschreibung und Vergabe von Monitoringleistungen, eine Anleitung zur Bewertung des wirt-schaftlichen Nutzens von SHM, Hinweise zur optimal einsetzbaren Messtechnik sowie einen Ansatz für das Datenmanagement zur Integration der Monitoringdaten in das Brückenmanagement. T2 - 11. Jahrestagung des DAfStb mit 63. Forschungskolloquium der BAM Green Intelligent Building CY - Berlin, Germany DA - 16.10.2024 KW - Leitfaden KW - Monitoring KW - Straßenbrücke PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-612931 SN - 978-3-9818564-7-7 SP - 186 EP - 191 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-61293 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simon, Patrick A1 - Helmrich, M. A1 - Herrmann, Ralf A1 - Schneider, Ronald A1 - Baeßler, Matthias A1 - Lorelli, S. A1 - Morgenthal, G. T1 - Maintalbrücke Gemünden: Bauwerksmonitoring und -identifikation aus einem Guss T1 - Maintalbrücke Gemünden – Integrated structural health monitoring and UAS diagnostics N2 - Die Infrastruktursysteme der Industriestaaten erfordern heute und in Zukunft ein effizientes Management bei alternder Bausubstanz, steigenden Lasten und gleichbleibend hohem Sicherheitsniveau. Digitale Technologien bieten ein großes Potenzial zur Bewältigung der aktuellen und künftigen Herausforderungen im Infrastrukturmanagement. Im BMBF-geförderten Projekt Bewertung alternder Infrastrukturbauwerke mit digitalen Technologien (AISTEC) wird untersucht, wie unterschiedliche Technologien und deren Verknüpfung gewinnbringend eingesetzt werden können. Am Beispiel der Maintalbrücke Gemünden werden ein sensorbasiertes Bauwerksmonitoring, bildbasierte Inspektion mit durch Kameras ausgestatteten Drohnen (UAS) und die Verknüpfung digitaler Bauwerksmodelle umgesetzt. Die aufgenommenen Bilder dienen u. a. als Grundlage für spätere visuelle Anomaliedetektionen und eine 3D-Rekonstruktion, welche wiederum für die Kalibrierung und Aktualisierung digitaler Tragwerksmodelle genutzt werden. Kontinuierlich erfasste Sensordaten werden ebenfalls zur Kalibrierung und Aktualisierung der Tragwerksmodelle herangezogen. Diese Modelle werden als Grundlage für Anomaliedetektionen und perspektivisch zur Umsetzung von Konzepten der prädiktiven Instandhaltung verwendet. Belastungsfahrten und historische Daten dienen in diesem Beitrag der Validierung von kalibrierten Tragwerksmodellen. N2 - Infrastructure systems of industrialised countries today and in the future require efficient management with an ageing stock, increasing loads while simultaneously maintaining a high level of safety. Digital technologies offer great potential for the current and future challenges in infrastructure management. The BMBF-funded project AISTEC is investigating how the individual technologies and their interconnection can be used beneficially. With the Maintalbrücke in Gemünden as an exemplary application, sensor-based structural monitoring, image-based inspection using unmanned aircraft systems (UAS) equipped with cameras and the integration of digital structural models are being implemented. The recorded images serve, among others, as basis for subsequent anomaly detection and a 3D reconstruction, which in turn are used for updating digital structural models. Continuously recorded sensor data is used to update the parameters of the structural models, which in turn provide the basis for predictive maintenance. Load tests are used to validate the models. KW - Bauwerksüberwachung KW - Strukturmonitoring KW - Structural Health Monitoring KW - Modell-Update KW - UAS KW - Belastungstest KW - Structural system identification KW - Structural health monitoring KW - Model update KW - UAS KW - Load tests PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-554924 DO - https://doi.org/10.1002/bate.202100102 SN - 0932-8351 VL - 99 IS - 3 SP - 163 EP - 172 PB - Ernst & Sohn CY - Berlin AN - OPUS4-55492 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, Ronald A1 - Thöns, S. A1 - Fischer, J. A1 - Bügler, M. A1 - Borrmann, A. A1 - Straub, D. T1 - A software prototype for assessing the reliability of a concrete bridge superstructure subjected to chloride-induced reinforcement corrosion N2 - A software prototype is developed for assessing and updating the reliability of single-cell prestressed concrete box girders subjected to chloride-induced reinforcement corrosion. The underlying system model consists of two integrated sub-models: a condition model for predicting the deterioration state of the box girder and a structural model for evaluating the overall system reliability. The condition model is based on a dynamic Bayesian network (DBN) model which considers the spatial variation of the corrosion process. Inspection data are included in the calculation of the system reliability through Bayesian updating on the basis of the DBN model. To demonstrate the effect of partial inspections, the software prototype is applied to a case study of a typical highway bridge with six spans. The case study illustrates that it is possible to infer the condition of uninspected parts of the structure due to the spatial correlation of the corrosion process. T2 - IALCCE 2014 - 4th International symposium on life-cycle civil engineering CY - Tokyo, Japan DA - 16.11.2014 PY - 2015 SN - 978-1-138-00120-6 SP - 846 EP - 853 PB - Taylor & Francis CY - London AN - OPUS4-32220 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nöther, N. A1 - Wang, S. A1 - Wosniok, Aleksander A1 - Glötzl, R. A1 - Schneider-Glötzl, J. ED - Xu, Y. L. ED - Zhu, S. ED - Xia, Y. ED - Ni, Y.Q. ED - Law, S.S. ED - Yin, J. H. ED - Su, Z.Q. T1 - Distributed Brillouin sensing in optical fibers: Soil displacement monitoring using sensor-equipped geogrids N2 - This paper reports on the application of distributed Brillouin fiber optic sensing to the monitoring of geotechnical structures. The presented approach to Brillouin sensing offers an alternative to the common pulse-based measurements by using the frequency domain analysis. The focus of the research and field-testing work is to collect reliable structural health monitoring data from large-scale structures while preserving the System’s versatility in terms of being suitable for different application environments (soil structures, foundations, concrete construction works, pipelines etc.) and its robustness in being well functioning in harsh environments. Upon reviewing the presented application test, it is concluded that Brillouin frequency domain based monitoring, when applied to geotechnical structures, is capable of providing accurate strain readings representing deformations of the soil body, and reliable temperature readings for generating temperature profiles of the entire structure. An overview of the frequency domain analysis of Brillouin sensing and its digital implementation is given, along with the experiences and insights drawn from an open field test of sensor-equipped geogrid mats. T2 - SHMII-6 - 6th International conference on structural health monitoring of intelligent infrastructure CY - Hong Kong, China DA - 09.12.2013 KW - Structural health monitoring KW - Distributed sensing KW - Fiber-optic sensing KW - Brillouin sensing KW - Strain and temperature measurements KW - Sensor-equipped geosynthetics PY - 2013 SN - 978-962-367-768-4 SP - 290 EP - 295 AN - OPUS4-29914 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Alte-Teigeler, R. A1 - Bergmann, F.-J. A1 - Gebhards, G. A1 - Grabe, W. A1 - Guse, J. A1 - Hartel, S. A1 - Huth, P. A1 - Jannicke, B. A1 - Lobach, T. A1 - Schneider, T. A1 - Sondermann, E. A1 - Vengels, D. A1 - Voß, M. A1 - Willand, E. ED - Roßbach, W. T1 - Technische Lieferbedingungen für Fugenfüllstoffe in Verkehrsflächen TL Fug-StB 15 N2 - Nach mehr als 15-jähriger Anwendung und mit der zwischenzeitlichen Einführung europäisch harmonisierter Normen für Fugenmaterialien war eine Anpassung Qualitäts- und Gütesicherungsanforderungen für Fugenfüllungen im Bundesfernstraßenbereich erforderlich. Hierbei ging es insbesondere darum, Maßnahmen und Verfahren zu entwickeln, um das nationale Qualitäts- und Gütesicherungsniveau weiter zu entwickeln und weiterhin sicher stellen zu können. Nach den Untersuchungserfahrungen im Labor und im Feld ging darum, neuartige Material- und Stoffkombinationen qualitätssicher dem Bauprozess zur Verfügung stellen zu können. Erforderliche Anforderungskriterien und zulässige Toleranzen der Lieferqualität wurden neu gefasst. Es wurde ein Verfahren entwickelt, europäische Bauprodukte qualitätsgesichert in den Bauprozess im Bundesfernstraßenbericht zu überführen. KW - Baustoffe KW - Fugenfüllsysteme KW - Anforderungs- und Leistungsrichtlinien PY - 2015 SN - 978-3-86446-163-7 SP - 1 EP - 39 PB - FGSV Verlag GmbH CY - Köln AN - OPUS4-37221 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hönig, D. A1 - Schneider, S. A1 - Domnick, R. A1 - Belzner, M. A1 - Beck, Uwe A1 - Hertwig, Andreas A1 - Stephanowitz, Ralph A1 - Weise, Matthias ED - Uhlmann, E. T1 - Ellipsometrische Codierung & Fabry-Perot Schichtsysteme mit offenen, versteckten und forensischen Merkmalen zur Produkt-Authentifizierung T2 - 3. Internationaler Kongress - Sichere Identität CY - Berlin, Deutschland DA - 2011-04-05 KW - Ellipsometric encoding KW - Fabry-Perot layer stacks KW - Product authentification PY - 2011 SP - 1 EP - 4(?) CY - Berlin AN - OPUS4-23306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Liang, S. A1 - Schneider, Rudolf T1 - Capillary zone electrophoresis of cowpea mosaic virus and peak identification KW - Cowpea mosaic virus KW - CZE KW - MALDI-TOF-MS KW - Peak identification KW - Two electrophoretic forms PY - 2009 DO - https://doi.org/10.1002/elps.200800468 SN - 0173-0835 VL - 30 IS - 9 SP - 1572 EP - 1578 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-19447 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Santos, S. A1 - Costa, C. A. E. A1 - Duarte, A. C. A1 - Scherer, H. W. A1 - Schneider, Rudolf A1 - Esteves, V. I. A1 - Santos, E. B. H. T1 - Influence of different organic amendments on the potential availability of metals from soil: A study on metal fractionation and extraction kinetics by EDTA N2 - The effects of long-term application of different organic amendments, as compared to mineral fertilizer, on Zn, Cu and Pb content and leachability in a luvisol derived from loess were assessed. The organic fertilizers, applied since 1962, were compost (COM) – from green organic household waste, sewage sludge (SLU) – from municipal water treatment facilities, farmyard manure (FYM) and the doses applied since 1997 were 90 t ha-1, 10 t ha-1 and 9 t ha-1, once in 3 years, respectively. The kinetics of metals extraction with 0.05 mol dm-3 EDTA at pH 6.0 has been studied. The two first-order reactions model was fitted to the kinetic data and allowed to distinguish two pools for each metal: a 'labile' fraction (Q1), quickly extracted with a rate constant k1, and a 'moderately labile' fraction (Q2), more slowly extracted, with a rate constant k2. Simultaneously, the pseudo-total metal contents in the soil samples were determined after digestion with aqua regia (3:1 HCl + HNO3). The obtained parameters Q1, k1, Q2, k2, for the kinetics of extraction of each metal in the three replicates of each fertilization mode, as well as the pseudo-total metal contents, were statistically analysed. COM and SLU application resulted in an increase of the total contents of Pb, Zn and Cu in soil. Further, the percentage of labile Zn and Pb also increased in consequence of the application of those amendments, particularly COM. The increase was more noticeable for Zn. FYM, despite not increasing the total content of Pb, Zn or Cu, did also have an effect on the leachability of Zn and Pb, increasing their labile fraction in soil. These results point to a potential risk of increasing metals mobility in soil, mainly Zn, associated to the use of organic amendments, particularly COM or SLU. KW - Compost KW - Sewage sludge KW - Soils KW - Metal mobility KW - EDTA KW - Kinetics PY - 2010 DO - https://doi.org/10.1016/j.chemosphere.2009.11.008 SN - 0045-6535 SN - 0366-7111 VL - 78 IS - 4 SP - 389 EP - 396 PB - Elsevier Science CY - Kidlington, Oxford AN - OPUS4-22187 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Otto, A.H. A1 - Schrader, S. A1 - Steiger, Thomas A1 - Schneider, M. T1 - Gas-phase deprotonation energies of sulfuric acid, perchloric acid, chlorosulfuric acid and fluorosulfuric acid PY - 1997 SN - 0956-5000 VL - 93 IS - 22 SP - 3927 EP - 3930 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-2679 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Almagro, J.-F. A1 - Busch, P. A1 - Gohil, D. D. A1 - Saunders, S. R. J. A1 - Sloof, W. G. A1 - Thiot, J.-F. A1 - Schneider, H. A1 - Whitwood, M. A1 - Wirth, Thomas T1 - Electron-Probe MICROanalysis of LighT Elements - Measurement Methods and Certified Reference Materials (MICROLITE) PY - 2000 IS - 266 SP - 1 EP - 35 PB - National Physical Laboratory CY - Teddington, Middlesex AN - OPUS4-6843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beck, Uwe A1 - Hönig, D. A1 - Schneider, S. A1 - Domnick, R. A1 - Belzner, M. A1 - Hertwig, Andreas A1 - Stephanowitz, Ralph A1 - Sahre, Mario A1 - Weise, Matthias T1 - Fabry-Perot-based layer stacks for ellipsometric encoding - Embedded public, hidden, and forensic information for product authentication N2 - Public, hidden, and forensic features either encoded or directly legible are used for authentication. Fabry-Perot layer stacks as information carriers in combination with imaging ellipsometry as optical read-out system provide all-in-one anti-counterfeiting capability that may establish the new security level 'encoded forensic'. Different layer designs are described with regard to all three security levels: public features (e.g. color and tilt effect) perceptible by the human eye, hidden features (e.g. spectroscopic response in the UV or IR), and forensic features (ellipsometric quantities Ψ and Δ as a function of wavelength λ and angle of incidence AOI). Physically uncloneable functions (PUF) could be realized as a result of a multi-material and a multi-parameter deposition approach as well as by means of specific design features of the Fabry-Perot layer stack. Hence, they are not subject to any reverse engineering strategies. Examples of stratified, micro-structured, and laser-modified Fabry-Perot layer systems are considered that may be used at all perception levels (e.g. human eye, bar code reader, and imaging ellipsometry) for authentication against product counterfeiting and related areas. -------------------------------------------------------------------------------------------------------------------- Zur Authentifizierung werden offene, versteckte und forensische Merkmale entweder codiert oder direkt auslesbar verwendet. Mit Fabry-Perot Schichtsystemen als Informationsträger in Kombination mit der abbildenden Ellipsometrie als optischem Auslesesystem steht ein 'all-in-one' Fälschungsschutz-System zur Verfügung, das ein neues Sicherheitsniveau 'kodiert-forensisch' darstellt. Es werden unterschiedliche Schichtdesigns beschrieben, mit denen alle drei Sicherheitsniveaus realisiert werden können: offene Merkmale (z.B. Farbe und Kippeffekt), die mit dem menschlichen Auge wahrnehmbar sind, versteckte Merkmale (z.B. die spektrale Antwort im Sichtbaren oder im IR) sowie forensische Merkmale (ellipsometrische Größen Ψ und Δ als Funktion der Wellenlänge λ und des Einfallswinkels AOI). Physikalisch nicht klonbare Funktionen (PUF) können im Ergebnis einer Multi-Material- und Multi-Parameter Beschichtungsstrategie sowie durch spezifische Design-Merkmale des Fabry-Perot Schichtsystems realisiert werden. Folglich sind solche Schichtsysteme dem 'reverse engineering' nicht zugänglich. Es werden Beispiele für lateral ausgedehnte, mikrostrukturierte und Laser modifizierte Schichtsysteme auf verschiedenen Ausleseniveaus (menschliches Auge, Barcode-Lesegerät, abbildendes Ellipsometer) vorgestellt, die zur Authentifizierung von Produkten und verwandte Gebiete geeignet sind. KW - Fabry-Perot Schichten KW - Ellipsometrie KW - Produkt- und Markenschutz PY - 2012 DO - https://doi.org/10.1002/vipr.201200494 SN - 0947-076X SN - 1522-2454 VL - 24 IS - 4 SP - 6 EP - 11 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-26180 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, S. T1 - Sustainability assessment for the recycling of masonry T2 - 6th Society & Materials International Conference SAM-6 CY - Leuven, Belgium DA - 2012-05-30 PY - 2012 AN - OPUS4-26151 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Beck, T. A1 - Flassenberg, G. A1 - Schneider, S. A1 - Eden, W. T1 - SIM Stoffkreislauf im Mauerwerksbau - Nachhaltigkeitsanalyse für das Mauerwerksrecycling T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2012-09-12 PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 2-1090 - 2-1097 AN - OPUS4-26540 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hönig, D. A1 - Schneider, S. A1 - Domnick, R. A1 - Belzner, M. A1 - Beck, Uwe A1 - Hertwig, Andreas A1 - Stephanowitz, Ralph A1 - Weise, Matthias T1 - Optical layer systems for product authentication: interference, scattering, light diffusion and ellipsometric encoding as public, hidden and forensic security features N2 - Embedding of information on surfaces is state of the art for identification testing in which public, hidden and forensic features are used. In many instances, the legal authentication of a product, a material or a document is required. Among the surface-based encoded labels, bar codes and data matrices are most frequently applied. They are publicly visible. The material itself is irrelevant, only a sufficient optical contrast is required. However, a strong material dependence of the label can be achieved by means of Fabry-Perot layer stacks. Stack designs are described with regard to all three security levels: public features (e.g. color and tilt effect) perceptible by the human eye, hidden features (e.g. optical response in a given spectral range) detectable by commonly available instruments and forensic features (ellipsometric quantities Ψ and Δ as a function of wavelength λ and angle of incidence AOI) only detectable by sophisticated instruments. Regarding material-correlated authentication, ellipsometric quantities Ψ and Δ are used as encoded forensic features for the first time. Hence, Fabry-Perot layer stacks as information carriers in combination with imaging ellipsometry as optical read-out system provide all-in-one anti-counterfeiting capabilities. T2 - PSE 2012 - 13th International conference on plasma surface engineering CY - Garmisch-Partenkirchen, Germany DA - 10.09.2012 KW - Fabry-Perot layers KW - Ellipsometry KW - Anti-counterfeiting PY - 2012 UR - http://www.pse-conferences.net/tl_files/pse2012/abstractupload/PSE2012-PO1001-ext.pdf SP - 1 EP - 4 AN - OPUS4-27304 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Herbst, Tristan A1 - Schneider, S. A1 - Beck, T. A1 - Flassenberg, G. T1 - Nachhaltigkeitsanalyse für das Mauerwerksrecycling PY - 2013 SN - 978-3-433-03017-2 SN - 978-3-433-60296-6 SN - 0170-4958 VL - 38 IS - Kap. 2.2.7 SP - 641 EP - 645 PB - Ernst & Sohn AN - OPUS4-28565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schneider, S. A1 - Herbst, Tristan A1 - Lenz, K. A1 - Wittstock, B. A1 - Bos, U. A1 - Sedlbauer, K. T1 - Recycling options for masonry - Identifying sustainable solutions N2 - Almost 15% of the average yearly waste accumulation in Germany originates from construction waste. It mainly comprises mineral materials such as concrete and different types of stonework, like lime-sandstone, red brick, aerated concrete and lightweight concrete. Due to the heterogeneous material composition, this kind of waste often ends up in landfill or can only be used for lower-level recycling. The AiF (German Federation of Industrial Research Association) funded the national research project "Sustainability Analysis for the Recycling of Masonry" in order to show different recycling opportunities for masonry as well as respective required technologies with regard to potential occurring mineral material mixtures. Technologies identified are for example such ones to break masonry into smaller grain sizes and technologies to separate the masonry into single material fractions. Furthermore, the project has the objective to assess the sustainability performance of various recycling options. These options and the related recycling routes are evaluated regarding environmental, economic and social aspects - all three pillars of sustainability - by using the methods of Life Cycle Assessment (LCA), Life Cycle Costing (LCC) and Life Cycle Working Environment (LCWE). The results are provided within a web-tool for operators of recycling facilities and for demolition companies. Its modular concept affords an individual sustainability assessment by several input options, like machine capacity, investment costs and achievable revenues. The tool enables the user to assess and compare different recycling opportunities concerning environmental, economic and social aspects in relation to identified material compositions and technologies applied. T2 - sb13 munich - Sustainable building conference CY - Munich, Germany DA - 24.04.2013 KW - Sustainability KW - LCA KW - LCC KW - LCWE KW - Recycling KW - Demolition material PY - 2013 SN - 978-3-8167-8965-9 SP - 387 EP - 388 PB - Fraunhofer IRB-Verl. AN - OPUS4-28639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Thieme-Hack, M. A1 - Berghaus, U. A1 - Brümmer, F. A1 - Elsner, U. A1 - Färber, C. A1 - Frank, D. A1 - Illgas, M. A1 - Kalbe, Ute A1 - Kathage, J. A1 - Leers, A. A1 - Müller, B. A1 - Röger-Göpfert, C. A1 - Russland, H.-J. A1 - Schnabel, B. A1 - Schneider, O. A1 - Schockmann, D. A1 - Schomakers, H. A1 - Schwalbe, D. A1 - Stegemann, D. A1 - van den Berg, T. A1 - Kramps, S. T1 - Fachbericht Kunststoffsportböden - Nachhaltige Kunststoffbelagsauswahl für Sportfreianlagen N2 - Kunststoff- und Kunststoffrasenflächen kommt bei intensiv genutzten Flächen als Allwetterbeläge eine große Bedeutung zu. Sie leisten einen wichtigen Beitrag zur Absicherung eines ganzjähriger Sportangebote. Gerade Kunststoffrasen ist aber in den letzten Jahren häufig in die Kritik geraten, insbesondere durch gefährliche Inhaltsstoffe und andere negative Einflüsse auf die Umwelt. Dies hat bei Bauherren zu einer Verunsicherung geführt und Fragen aufgeworfen, die erst teilweise beantwortet sind. Die Diskussionen rund um diesen Allwetterbelag haben bereits dazu geführt, dass von Seiten der Industrie viel verändert wurde und neue innovative Lösungen gefunden werden. Der Fachbericht stellt eine Handreichung für Fachleute und interessierte Laien dar, um mehr Klarheit besonders hinsichtlich der Umweltanforderungen zu erzielen. KW - Kunststoffsportbeläge KW - Kunstrasen KW - Umweltverträglichkeit KW - Schadstofftransfer KW - Mikroplastik PY - 2022 UR - https://shop.fll.de/de/fachbericht-kunststoffsportboeden-broschuere.html SP - 1 EP - 70 PB - Forschungsgesellschaft Landschaftsentwicklung Landschaftsbau (FLL) CY - Bonn AN - OPUS4-54390 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Recknagel, Christoph A1 - Alte-Teigeler, R. A1 - Bergmann, F.-J. A1 - Gebhards, G. A1 - Grabe, W. A1 - Guse, J. A1 - Hartel, S. A1 - Huth, P. A1 - Jannicke, B. A1 - Lobach, T. A1 - Schneider, T. A1 - Sondermann, E. A1 - Vengels, D. A1 - Voß, M. A1 - Willand, E. ED - Roßbach, W. T1 - Zusätzliche Technische Vertragsbedingungen und Richtlinien für Fugen in Verkehrsflächen ZTV Fug-StB 15 N2 - Unter Berücksichtigung praktischer und wissenschaftlich-technischer Erkenntnisse der letzten 15 Jahre - insbesondere auch auf der Basis verschiedener BAM-Forschungsergebnisse und Zulassungsverfahren - erfolgte eine Überarbeitung der Grundlagen, Bauprinzipien, Ausführungs- und Einbaukriterien sowie der Zulassungs- und Gütesicherungsmaßnahmen für insgesamt 4 Bauarten von Fugenfüllsystemen für hochbeanspruchte Verkehrsflächen. In diesem - für den Bundesfernstraßenbereich verbindlichen bautechnischen Regelwerk - finden insbesondere auch die Ergebnisse mehrerer wissenschaftlicher Vorhaben der BAM bezüglich labortechnischer Untersuchungen und Felduntersuchungen zum Funktionsverhalten und zur Dauerhaftigkeit erste baurechtliche Konsequenzen. Auf der Basis von Untersuchungen u.a. im Brückenbau wurden Regelungen für die Fugenausbildung in Asphalt und bei Befestigungskombinationen erarbeitet und umgesetzt. Damit konnten umfassende Regelungen für die maßgebenden Fahrbahnbeläge im Bundesfernstraßenbereich der Straßenbauverwaltung und ausführenden Industrieunternehmungen zur Verfügung gestellt werden. Die Neufassung dieser Regelungen dient darüber hinaus dem Ziel, den von der BAM vertretenen Wechsel hin zu einer performance-bezogenen Bewertungsmethodik, vorzubereiten. KW - Baustoffe KW - Fugen KW - Betonstraßen PY - 2015 SN - 978-3-86446-162-0 SP - 1 EP - 50 PB - FGSV Verlag GmbH CY - Köln AN - OPUS4-37220 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Anker, Andy S. A1 - Aspuru-Guzik, Alán A1 - Ben Mahmoud, Chiheb A1 - Bennett, Sophie A1 - Briling, Ksenia R. A1 - Changiarath, Arya A1 - Chong, Sanggyu A1 - Collins, Christopher M. A1 - Cooper, Andrew I. A1 - Crusius, Daniel A1 - Darmawan, Kevion K. A1 - Das, Basita A1 - David, Nicholas A1 - Day, Graeme M. A1 - Deringer, Volker L. A1 - Duarte, Fernanda A1 - Eardley-Brunt, Annabel A1 - Evans, Matthew L. A1 - Evans, Rob A1 - Fairlamb, Ian A1 - Franklin, Barnabas A. A1 - Frey, Jeremy A1 - Ganose, Alex M. A1 - Goulding, Mark A1 - Hafizi, Roohollah A1 - Hakkennes, Matthijs A1 - Hickey, Niamh A1 - James, Gillian A1 - Jelfs, Kim E. A1 - Kalikadien, Adarsh V. A1 - Kapil, Venkat A1 - Koczor-Benda, Zsuzsanna A1 - Krammer, Ferdinand A1 - Kulik, Heather J. A1 - Kumar, Vishank A1 - Kuttner, Christian A1 - Lam, Erwin A1 - Lou, Yuchen A1 - Mante, Eltjo A1 - Martin, Jennie A1 - Mroz, Austin M. A1 - Nematiaram, Tahereh A1 - Pare, Charles W. P. A1 - Patra, Sarbani A1 - Proudfoot, James A1 - Ruscic, Branko A1 - Ryder, Matthew R. A1 - Sakaushi, Ken A1 - Saßmannshausen, Jörg A1 - Savoie, Brett M. A1 - Schneider, Nadine A1 - Schwaller, Philippe A1 - Skjelstad, Bastian Bjerkem A1 - Sun, Wenhao A1 - Szczypiński, Filip T. A1 - Torrisi, Steven A1 - Ueltzen, Katharina A1 - Vishnoi, Shubham A1 - Walsh, Aron A1 - Wang, Xinwei A1 - Wilson, Chloe A1 - Wu, Ruiqi A1 - Zeitler, Jakob T1 - Discovering structure–property correlations: General discussion N2 - This article is a discussion of the paper "Web-BO: Towards increased accessibility of Bayesian optimisation (BO) for chemistry" by Austin M. Mroz, Piotr N. Toka, Ehecatl Antonio del Río Chanona and Kim E. Jelfs (Faraday discussions, 2025, 256, 221-234). KW - Materials design KW - Machine learning KW - Automation KW - Materials discovery PY - 2025 DO - https://doi.org/10.1039/d4fd90062f SN - 1359-6640 SN - 1364-5498 VL - 256 IS - Themed collection: Data-driven discovery in the chemical sciences SP - 373 EP - 412 PB - Royal Society of Chemistry (RSC) CY - Cambridge AN - OPUS4-62208 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -