TY - JOUR A1 - Berger, J. A1 - Zahedi-Azad, S. A1 - Voss, H. A1 - Ernst, O.C. A1 - Hammerschmidt, R. A1 - Boeck, T. A1 - Martin, J. A1 - Bonse, J. A1 - Krüger, J. A1 - Schmid, M. T1 - CuInSe2-based micro-concentrator solar cells fabricated from In islands grown by laser-assisted MO-CVD N2 - Micro-concentrator solar cells offer a promising route for reducing material usage in photovoltaics. For Cu(In,Ga)Se2, multiple micro-concentrator manufacturing methods have already been evaluated. All of them involve either high preparation complexity or post-processing to recycle unused precursor or absorber materials. In this work, a new method using laser-assisted metal-organic chemical vapor deposition (LA-MOCVD) was applied to directly grow arrays of indium micro-islands. These arrays are examined and further processed to CuInSe2 micro-solar cell arrays. The geometry and morphology of the islands were investigated and compared before and after absorber formation. The investigation shows that the absorber growth is limited to the vertical direction normal to the substrate surface and that the starting morphology is preserved. Furthermore, the absorber island arrays are processed into micro-modules and operational solar cells are achieved as a proof of principle. These not yet optimized arrays reach a conversion efficiency of 0.65% under 1 sun illumination. Under 17 suns of light concentration, the efficiency gain is between 60 and 250%. This work demonstrates the method's viability for the fabrication of micro-solar cell arrays, with clear potential for achieving higher conversion efficiencies through future optimization. KW - Micro-concentrator solar cells KW - Laser-assisted chemical vapor deposition KW - CISe KW - Bottom-up fabrication KW - Resource efficiency PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656711 DO - https://doi.org/10.1016/j.solmat.2026.114284 SN - 0927-0248 VL - 301 SP - 1 EP - 10 PB - Elsevier B.V. AN - OPUS4-65671 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stähler, S.C. A1 - Sens-Schönfelder, C. A1 - Niederleithinger, Ernst T1 - Monitoring stress changes in a concrete bridge with coda wave interferometry N2 - Coda wave interferometry is a recent analysis method now widely used in seismology. It uses the increased sensitivity of multiply scattered elastic waves with long travel-times for monitoring weak changes in a medium. While its application for structural monitoring has been shown to work under laboratory conditions, the usability on a real structure with known material changes had yet to be proven. This article presents experiments on a concrete bridge during construction. The results show that small velocity perturbations induced by a changing stress state in the structure can be determined even under adverse conditions. Theoretical estimations based on the stress calculations by the structural engineers are in good agreement with the measured velocity variations. KW - Bridges (structures) KW - Concrete KW - Interferometry KW - Structural acoustics PY - 2011 DO - https://doi.org/10.1121/1.3553226 SN - 0001-4966 SN - 1520-8524 VL - 129 IS - 4 SP - 1945 EP - 1952 PB - AIP CY - Melville, NY, USA AN - OPUS4-28588 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -