TY - JOUR A1 - Otremba, Frank A1 - Romero-Navarrete, José A. A1 - Lozano Guzmán, A. A. T1 - Modelling of a Partially Loaded Road Tanker during a Braking-in-a-Turn Maneuver N2 - This paper describes a theoretical model to simulate the effects of a sloshing cargo on the safety performance of a vehicle that performs a braking-in-a-turn maneuver when travels at a partial fill level. The fundamental assumption of the model consists of the superposition of the effects of two simplified mechanical-analogy models that represent a liquid cargo on a vehicle, including one for the roll motion and another one for the pitch motion. The distinctive characteristics of the mechanical models, however, is that they are based upon a validated formulation to establish the properties of the pendulum (length). The results suggest a small effect of the sloshing cargo on the braking efficiency of the cargo, while the load transfer is moderately affected. However, such results should be put into a perspective, according to which such small variations can represent the avoidance of a rear-end crash or a rollover. In this respect, a specialized ABS system could be considered to improve the performance of such kind of vehicles when performing such maneuvers. Validation of the proposed methodology should be performed as a continuation of this research effort. KW - ABS KW - Braking-in-a-turn maneuver KW - Cargo sloshing KW - Road tankers KW - Load transfer KW - Simulation KW - Turning maneuvers PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-456908 DO - https://doi.org/10.3390/act7030045 VL - 7 IS - 45 SP - 1 EP - 14 PB - MDPI CY - Basel AN - OPUS4-45690 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Romero-Navarrete, José A. A1 - Otremba, Frank A1 - Lozano Guzman, A. A. T1 - Estimation of the effect of the driving style on pollutants emission by heavy trucks N2 - Different approaches have been attempted so far to reduce fuel consumption and linked pollutants, including vehicle equipment and design, with rational driving style being recognized as a potential source of fuel savings. However, no specific methodology had been suggested so far to assess fuel economy of driving other than the fuel consumed itself. In this paper, the Standard deviation of driving acceleration has been found to be directly associated to fuel consumption, so that the less dispersion of the driving acceleration, produces the lower fuel consumptions and emissions. Such metric could be thus used to assess driving style. KW - Driving style KW - Fuel consumption KW - Stored energy KW - GPS data KW - Simulation KW - Particle emissions PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-511540 UR - https://www.iaras.org/iaras/home/caijes/estimation-of-the-effect-of-the-driving-style-on-pollutants-emission-by-heavy-trucks SN - 2367-8941 VL - 5 SP - 220 EP - 226 PB - IARAS CY - Sofia AN - OPUS4-51154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Otremba, Frank A1 - Romero-Navarrete, José A. T1 - A simplified model to simulate the pitch instability of a partially filled tank trailer N2 - Singular situation of pitch instability, modeled through simplified models. More analysis is required to proposed vehicle design improvements. T2 - IMECE 2017 CY - Tampa, FL, USA DA - 03.11.2017 KW - Pitch instability KW - Tank trailer KW - Simulation PY - 2017 AN - OPUS4-42851 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Romero-Navarrete, José A. T1 - Simulation of liquid cargo - vehicle intearction under lateral and longitudinal accelerations N2 - A nonlinear relationship between the magnitude of the radius and the maximum value reached for the selected performance measure. The dispersion in the travelling speed also represents significant variations in the vehicle performance, when it runs along a winding road. T2 - The 9th International Conference on Computational Methods (ICCM2018) CY - Rom, Italy DA - 06.08.2018 KW - Simulation KW - Liquid cargo KW - Vehicle KW - Acceleration PY - 2018 AN - OPUS4-45705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -