TY - JOUR A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian T1 - Pulsed r.f. plasma for polymer film deposition with SEERS diagnostic T2 - 8th International Conference on Plasma Surface Engineering (PSE2002) CY - Garmisch-Partenkirchen, Germany DA - 2002-09-09 KW - C pulsed KW - C radio frequency KW - C plasma KW - D nitrogen KW - D oxygen KW - DX plasma deposition PY - 2002 SN - 0257-8972 SP - 405 PB - Elsevier Science CY - Lausanne AN - OPUS4-1615 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sickfeld, Jürgen A1 - Schulze, Rolf-Dieter A1 - Raabe, Hans-Joachim T1 - Messung von Spannungen in Tankinnenbeschichtungen - Quellverhalten mit organischen Medien KW - Beschichtung, organisch KW - Tank KW - Spannung KW - Epocidharz KW - Quellverhalten PY - 1996 SN - 0014-7699 VL - 102 IS - 2 SP - 49 EP - 55 PB - Vincentz CY - Hannover AN - OPUS4-661 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wagner, G. A1 - Tiede, U. A1 - Meisel, M. A1 - Schulze, Rolf-Dieter A1 - Mackrodt, Brigitte T1 - Examination of universal microhardness of hard reaction layers resulting from reactions of organic polymers with container glass surfaces and their use for low-friction protective layers KW - Glas KW - Universalmikrohärte KW - Polymer, organisch KW - Gleitschutzschicht PY - 1995 SN - 0946-7475 VL - 68 IS - 10 SP - 318 EP - 326 PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-592 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Altmann, Korinna A1 - Schulze, Rolf-Dieter A1 - Hidde, Gundula A1 - Friedrich, Jörg Florian T1 - Elektrospray-Ionisation (ESI) - Lochfreie elektrophoretische Abscheidung von ultra-dünnen Polymerschichten N2 - Die Elektrospray-Ionisations (ESI)-Vernebelung von Polymerlösungen wird analytisch zur massenspektrometrischen Bestimmung der Molmassen von Makromolekülen genutzt. Dabei werden die Polymermoleküle nach einem speziellen Mechanismus im Hochspannungsfeld unter Normaldruckbedingungen vereinzelt und in das Massenspektrometer überführt. Dieser Prozeß kann auch zur flächigen Abscheidung einzelner Polymermoleküle genutzt werden. Die Struktur und Zusammensetzung sowie die Molmassenverteilung der Polymere bleiben dabei erhalten. Schichten polarer oder ionischer Polymere der Dicke einer Quasi-Monolage bis hin zu mehreren 100 Nanometern können abgeschieden werden. Erwähnenswert ist, daß der ESI-Prozeß zu den elektrophoretischen Verfahren gehört, was die Ausbildung lochfreier Schichten auf elektrisch leitenden Substraten nicht nur auf der der Spraydüse zugewandten Seite ermöglicht, sondern auch auf der abgeschatteten Rückseite. Dieses Verhalten wurde zur vollständigen ESI-Umhüllung von dichtgepackten Kohlenstoff-Faser-Bündeln mit haftvermittelnden Polymerschichten ausgenutzt. PY - 2011 DO - https://doi.org/10.1002/vipr.201100471 SN - 0947-076X SN - 1522-2454 VL - 23 IS - 6 SP - 17 EP - 23 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-25392 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Altmann, Korinna A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian T1 - Polymer deposition morphology by electrospray deposition - Modifications through distance variation N2 - Electrospray deposition (ESD) of highly diluted polymers was examined with regard to the deposited surface structure. Only the flight distance (flight time) onto the resulting deposited surface was varied from 20 to 200 mm. An apparatus without any additional heating or gas flows was used. Polyacrylic acid (PAA) and polyallylamine (PAAm) in methanol were deposited on Si wafers. The polymer layers were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, derivatization reactions and Fourier transform infrared spectroscopy using a grazing incidence unit. SEM images illustrated the changing structures of PAA and PAAm. For PAA the deposited structure changed from a smooth film (20 mm) to a film with individual droplets on the coated surface (100 mm and 200 mm), while for PAAm individual droplets can be seen at all distances. The ESD process with cascades of splitting droplets slows down for PAA after distances greater than 40 mm. In contrast, the ESD process for PAAm is nearly stopped within the first flight distance of 20 mm. Residual solvent analysis showed that most of the solvent evaporated within the first 20 mm capillary-sample distance. KW - Electrospray ionization KW - Electrospray deposition KW - Ultra-thin layers KW - Capillary-sample distance KW - Residual solvent PY - 2014 DO - https://doi.org/10.1016/j.tsf.2014.06.020 SN - 0040-6090 VL - 564 SP - 269 EP - 276 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-31252 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Altmann, Korinna A1 - Schulze, Rolf-Dieter A1 - Hidde, Gundula A1 - Friedrich, Jörg-Florian T1 - Electrospray ionization for deposition of ultra-thin polymer layers – principle, electrophoretic effect and applications N2 - Nebulizing of polymer solutions, in a high-voltage field under atmospheric conditions by electrospray ionization (ESI), is a comfortable way to deposit ultra-thin layers of polar or ionic polymers onto any conductive substrate materials. The substrate is grounded and the polymer solution is sprayed through a powered capillary. The formed charged droplets shrink by solvent evaporation during their way to the grounded substrate, the charges close ranks and the droplets collapse consecutively by charge repulsion, thus forming finally charged single macromolecules. After their discharging at the grounded substrate, an ultrathin ‘quasi-monomolecular’ polymer layer is formed. It could be shown by imaging of scratches through the polymer layer by atomic force microscopy that the deposited polymer layers are dense at a thickness of about 10 nm. Carbon fibre bundles were coated with poly (allylamine) (PAAm) or poly(acrylic acid) (PAA) as potential adhesion-promoting layers in fibre–polymer composites. The polymer deposition is self-inhibiting after formation of a continuous coverage of about 200 nm for PAAm and 30 nm for PAA as result of surface charging. Continuous deposition onto such isolating layers or polymers without charging can be achieved by using current of alternating polarity. The film formation is self-healing because of the electrophoretic effect, i.e. the ion discharging occurs preferentially at noncoated areas. This electrophoretic effect of ESI was demonstrated by completely enwrapping all the carbon fibres of the roving within a distance of about 100 μm far from its outside and also at the backside of the fibre bundle with about 80% of the topside coverage, as measured by X-ray photoelectron spectroscopy and visualized using scanning electron microscopy. KW - Complete enwrapping of fibres KW - Ultra-thin polymer layers KW - Self-healing KW - Electrospray deposition KW - Carbon fibres KW - Electrophoretic effect PY - 2012 DO - https://doi.org/10.1080/01694243.2012.727170 SN - 0169-4243 VL - 27 IS - 9 SP - 988 EP - 1005 PB - Taylor & Francis CY - London AN - OPUS4-42631 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mix, Renate A1 - Gerstung, Vanessa A1 - Falkenhagen, Jana A1 - Schulze, Rolf-Dieter A1 - Friedrich, Jörg Florian T1 - Characterization of plasma-polymerized allyl alcohol polymers and copolymers with styrene KW - Plasma polymerization KW - Surface functionalization KW - Molar mass PY - 2007 SN - 0169-4243 SN - 1568-5616 VL - 21 IS - 5-6 SP - 487 EP - 508 PB - VNU Science Press CY - Utrecht AN - OPUS4-14765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate A1 - Retzko, Iris A1 - Gerstung, Vanessa A1 - Weidner, Steffen A1 - Schulze, Rolf-Dieter A1 - Unger, Wolfgang ED - Mittal, K. L. T1 - Plasma polymer adhesion promoters for metal-polymer systems T2 - 2nd International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications CY - Newark, NJ, USA DA - 2001-12-03 KW - r.f. pulsed plasma KW - Plasma polymers with functional groups KW - Copolymers KW - Adhesion promoting interlayers KW - Metal-polymer systems PY - 2003 SN - 90-6764-378-5 VL - 2 SP - 359 EP - 388 PB - VSP CY - Utrecht AN - OPUS4-6967 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mix, Renate A1 - Falkenhagen, Jana A1 - Schulze, Rolf-Dieter A1 - Gerstung, Vanessa A1 - Friedrich, Jörg Florian ED - K.L. Mittal, T1 - Plasma homo- and copolymerization of allyl alcohol and styrene KW - Plasma polymerization KW - Surface functionalization KW - Molar masses PY - 2009 SN - 978-90-04-16590-8 VL - 5 SP - 317 EP - 340 PB - Koninklijke Brill NV CY - Leiden, The Netherlands AN - OPUS4-19606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -