TY - CONF A1 - He, Yuxiang A1 - Robens-Radermacher, Annika A1 - Noda, S. A1 - Wolf, Christoph A1 - Unger, Jörg F. A1 - Mai, I. ED - Ferrara, L. ED - Muciaccia, G. ED - di Summa, D. T1 - Automated Workflows for Concrete Additive Manufacturing for Design, Optimization, and Fabrication of Parametrized Elements N2 - 3D concrete printing is an innovative new construction technology offering the potential to enable the efficient production of individual structures with less consumption of resources. The technology will mainly shape the future construction philosophy. From the design of a structure to the printed component, many individual steps based on different software are required, which must be repeated for each new or even slightly changed design. The geometry of the structure is created in a CAD program. The print path is defined in slicer software leading to the machine code for the printer to print the structure. A numerical model of the printed structure makes optimization in design and fabrication possible, by predicting the behaviour of the structure and reducing the number of test prints and costs. For that, additional steps like meshing the design and running a simulation are required. In order to work efficiently, an automated workflow is necessary, which runs all of the individual steps without interacting with each software program. Furthermore, changes in parameters or the exchange of parts (different designs or printers) must be simple. One way to develop such an automated workflow is presented within this paper. The interfaces are defined in a way that allows running the full chain of tools as well as individual steps. The workflow is demonstrated based on the example of a parametrized wall element for extrusion-based concrete. Furthermore, a test series of cubes is printed, and the influence of different infill structures is numerically and experimentally compared. T2 - RSCC 2024 - RILEM Spring Convention and Conference 2024 CY - Milano, Italy DA - 07.04.2024 KW - 3D concrete printing KW - Automation KW - Workflow KW - Innovative technologies PY - 2024 SN - 978-3-031-70280-8 SN - 978-3-03170281-5 SN - 978-3-031-70283-9 DO - https://doi.org/10.1007/978-3-031-70281-5_28 SN - 2211-0844 SN - 2211-0852 N1 - Serientitel: RILEM Bookseries – Series title: RILEM Bookseries VL - 56 IS - 2 SP - 247 EP - 254 PB - Springer CY - Cham AN - OPUS4-61608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Robens-Radermacher, Annika A1 - Saif-Ur-Rehman, A1 - Wolf, Christoph A1 - Kujath, Cezary A1 - He, Yuxiang A1 - Mezhof, Alexander A1 - Hüsken, Götz A1 - Jeyifous, Olubunmi Anthony A1 - Unger, Jörg F. ED - Rogge, Andreas ED - Meng, Birgit T1 - Modellierung und Simulation von 3D Betondruck – Design- und Prozessoptimierung N2 - Der 3D Betondruck ermöglicht die effiziente und ressourcenschonendere Herstellung maßgeschneiderter Betonstrukturen. Trotz des großen Potentials gibt es bisher keine einheitlichen Normen und Standards für den sicheren und robusten 3D Betondruck. Der Beitrag zeigt das Potential numerischer Methoden und Modelle zur effizienten und ressourcenschonenden Design- und Prozessoptimierung des 3D Betondrucks. Dazu werden die aktuellen Forschungsarbeiten im Bereich der Entwicklung robuster und zuverlässiger numerischer Zwillinge, geeigneter Optimierungstools sowie digitaler Workflows diskutiert. T2 - 11. Jahrestagung des DAfStb mit 63. Forschungskolloquium der BAM Green Intelligent Building CY - Berlin, Germany DA - 16.10.2024 KW - Modellierung KW - Simulation KW - 3D Betondruck KW - Designoptimierung KW - Prozessoptimierung PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-613023 SN - 978-3-9818564-7-7 SP - 132 EP - 137 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-61302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Unger, Jörg F. A1 - Robens-Radermacher, Annika A1 - Tamsen, Erik T1 - Data provenance - from experimental data to trustworthy simulation models and standards N2 - FAIR (findable, accessible, interoperable and reusable) data usage is one of the main principals that many of the research and funding organizations include in their strategic plans, which means that following the main principals of FAIR data is required in many research projects. The definition of data being FAIR is very general, and when implementing that for a specific application or project or even setting a standardized procedure within a working group, a company or a research community, many challenges arise. In this contribution, an overview about our experience with different methods, tools and procedures is outlined. We begin with a motivation on potential use cases for the applications of FAIR data with increasing complexity starting from a reproducible research paper over collaborative projects with multiple participants such as Round-Robin tests up to data-based models within standardization codes, applications in machine learning or parameter estimation of physics-based simulation models. In a second part, different options for structuring the data are discussed. On the one hand, this includes a discussion on how to define actual data structures and in particular metadata schema, and on the other hand, two different systems for storing the data are discussed. The first one is the openBIS system, which is an open-source Lab notebook and PostgreSQL based data management system. A second option are a semantic representations using RDF based ontologies for the domain of interest. In a third section, requirements for workflow tools to automate data processing are discussed and their integration into reproducible data analysis is presented with an outlook on required information to be stored as metadata in the database. Finally, the presented procedures are exemplarily demonstrated for the calibration of a temperature dependent constitutive model for additively manufactured mortar. Metadata schemata for a rheological measurement setup are derived and implemented in an openBIS database. After a short review of a potential numerical model predicting the structural build-up behaviour, the automatic workflow to use the stored data for model parameter estimation is demonstrated. T2 - 4th International Congress on Materials & Structural Stability CY - Rabat, Morocco DA - 08.03.2023 KW - Data provenance KW - Experimental data to trustworthy KW - Simulation models and Standards PY - 2023 UR - https://www.rsc-cmss23.asmatec.org/RILEM%20Committees%20Program.php SP - 1 EP - 9 CY - Rabat, Morocco AN - OPUS4-57349 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mezhov, Alexander A1 - Robens-Radermacher, Annika ED - Mezhov, Alexander ED - Robens-Radermacher, Annika ED - Zhang, Kun ED - Kühne, Hans-Carsten ED - Unger, Jörg F. ED - Schmidt, Wolfram T1 - Temperature Impact on the Structural Build-Up of Cementitious Materials - Experimental and Modelling Study N2 - With increasing focus on industrialized processing, investigating, understanding, and modelling the structural build-up of cementitious materials becomes more important. The structural build-up governs the key property of fresh printable materials -- buildability -- and it influences the mechanical properties after the deposition. The structural build-up rate can be adjusted by optimization of the mixture composition and the use of concrete admixtures. Additionally, it is known, that the environmental conditions, i.e. humidity and temperature have a significant impact on the kinetic of cement hydration and the resulting hardened properties, such as shrinkage, cracking resistance etc. In this study, small amplitude oscillatory shear (SAOS) tests are applied to examine the structural build-up rate of cement paste subject to different temperatures under controlled humidity. The results indicate significant influences of the ambient temperature on the intensity of the re-flocculation (Rthix) rate, while the structuration rate (Athix) is almost not affected. A bi-linear thixotropy model extended by temperature dependent parameters coupled with a linear viscoelastic material model is proposed to simulate the mechanical behaviour considering the structural build-up during the SAOS test T2 - Third RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2022) CY - Loughborough, UK DA - 27.06.2022 KW - Structural build-up KW - Rheological properties KW - Modelling PY - 2022 SN - 978-3-031-06116-5 DO - https://doi.org/10.1007/978-3-031-06116-5_49 VL - 37 SP - 330 EP - 336 PB - Springer International Publishing CY - Cham AN - OPUS4-55580 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Robens-Radermacher, Annika A1 - Unger, Jörg F. A1 - Mezhov, Alexander A1 - Schmidt, Wolfram ED - Biondini, F. ED - Frangopo, D. M. T1 - Temperature dependent modelling approach for early age behavior of printable mortars N2 - Structural build-up describes the stability and early-age strength development of fresh mortar used in 3D printing. lt is influenced by several factors, i.e. the composition of the print­ able material, the printing regime, and the ambient conditions. The existing modelling approaches for structural build-up usually define the model parameters for a specific material composition with­ out considering the influence of the ambient conditions. The goal of this contribution is to explicitly include the temperature dependency in the modelling approach. Temperature changes have signifi­ cant impact on the structural build-up process: an increase of the temperature leads to a faster dissol­ ution of cement phases and accelerates hydration. The proposed extended model includes temperature dependency using the Arrhenius theory. The new model parameters are successfully calibrated based on Viskomat measurement data using Bayesian inference. Furthermore, a higher impact of the temperature in the re-flocculation as in the structuration stage is observed. T2 - The Eighth International Symposium on Life-Cycle Civil Engineering (IALCCE 2023) CY - Milano, Italien DA - 02.07.2023 KW - 3D concrete printing KW - Material characterization KW - Structural build-up KW - Thixotropy KW - Model calibration PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-582175 SN - 978-1-003-32302-0 DO - https://doi.org/10.1201/9781003323020-146 SN - 978-1-003-32302-0 VL - 1st Edition SP - 1193 EP - 1200 PB - CRC Press AN - OPUS4-58217 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -