TY - RPRT A1 - Vollertsen, F. A1 - Grünenwald, S. A1 - Rethmeier, Michael A1 - Gumenyuk, Andrey A1 - Reisgen, U. A1 - Olschock, S. T1 - Welding thick steel plates with fibre lasers and GMAW T2 - IIW Document N2 - The results of a collaborative research project on laser beam weldability of carbon steels of high sheet thickness are presented. That includes single and multiple pass welding of 16 mm and 20 mm thick plates, as well as the investigation of acceptable tolerances i.e. gap bridgeability and edge misalignment. For the welding experiments fibre lasers with 8 kW, 20 kW laser power and different MAG-techniques were used in various applications. With the 20 kW fibre laser 16 mm plates could be welded with a single pass, 20 mm required a seam preparation or alternatively preheating of the material. For multi pass welding with 8 kW laser power a joint preparation with a single V-butt joint with a broad root face (Ygroove) was applied. The root pass was always welded with a hybrid process, the filler passes with a hybrid process as well as a MAG process which produced the best results. T2 - 61th IIW Annual Assembly CY - Graz, Austria DA - 2008-07-06 KW - Hybrid Welding KW - Carbon Steels KW - Single pass welding KW - Multi pass welding PY - 2008 IS - IV-965-08 SP - 1 EP - 14 PB - International Institute of Welding CY - Paris AN - OPUS4-18678 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -