TY - JOUR A1 - Friedrich, Jörg Florian A1 - Kühn, Gerhard A1 - Mix, Renate A1 - Hoffmann, Katrin A1 - Resch-Genger, Ute T1 - Tailoring of polymer surfaces with monotype functional groups of variable density using chemical and plasma chemical processes N2 - Polymer surfaces were modified in low-pressure glow discharge plasmas for introduction of monotype functional groups of different type and density. For this purpose three ways are selected, (i) oxygen plasma treatment followed by wet-chemical reduction of O functional groups to OH groups, (ii) plasma bromination for introducing C - Br groups and (iii) coating by deposition of thin plasma (co-) polymerized layers of functional groups-bearing monomers with OH, NH2, COOH, epoxy etc. functionalities. Subsequently, these groups were used as anchoring points for chemical grafting of spacer molecules, oligomers, prepolymers, fluorescent labels, ionic and nucleic acid residues, employing different chemical routes. The yield in monosort functional groups at polymer surfaces ranged from 10–14 (process i), 20–40 (process ii) and 18–31 groups per 100 C atoms (process iii) as measured by XPS after derivatization. The consumption of functional groups amounted to 40–90% of all functionalities present at the surface and depended on the dimensions of grafted molecules. For infinitely variably tuning the number of functional groups process iii was performed as copolymerization of a functional group-carrying comonomer with a non-functionalized (“chain-extending”) comonomer. KW - Introduction of functional groups KW - Plasma modification KW - Reactions at Polymer surfaces PY - 2006 SN - 0340-255x SN - 1437-8027 VL - 132 SP - 62 EP - 71 PB - Springer CY - Berlin AN - OPUS4-12515 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoffmann, Katrin A1 - Resch-Genger, Ute A1 - Mix, Renate A1 - Friedrich, Jörg Florian T1 - Fluorescence Spectroscopic Studies on Plasma-Chemically Modified Polymer Surfaces with Fluorophore-Labeled Functionalities N2 - Molecular engineering of polymer surfaces that includes the attachment of functional molecules to existing or previously generated reactive chemical groups like e.g., - OH, - NH2, or - CHO requires simple strategies and tools for the controlled generation of surface functionalities and their derivatization as well as for their identification and eventually quantification. Here, we systematically investigate the plasma-chemical surface modification of polypropylene films in combination with dansyl labeling chemistry and conventional, yet costly, XPS and highly sensitive fluorescence spectroscopy for the detection of surface groups. Based on these results, the potential of and requirements on the fluorometric characterization and quantification of surfaces functionalities are discussed. KW - Fluorescence spectroscopy KW - Surface functionalization KW - Covalent labeling of polymer surfaces KW - Plasma modification KW - Fluorescent probe PY - 2006 U6 - https://doi.org/10.1007/s10895-006-0076-x SN - 1053-0509 SN - 1573-4994 VL - 16 IS - 3 SP - 441 EP - 448 PB - Plenum Publ. Corp. CY - New York, NY AN - OPUS4-12560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mix, Renate A1 - Hoffmann, Katrin A1 - Buschmann, H.-J. A1 - Friedrich, Jörg Florian A1 - Resch-Genger, Ute T1 - Anbindung von Fluoreszenzfarbstoffen an plasmachemisch funktionalisierte und Cucurbituril-modifizierte Oberflächen N2 - Plasmapolymerisierte Allylaminschichten (50 nm) wurden auf Polypropylenfolien abgeschieden. Die auf diese Weise generierte NH2-funktionalisierte Polymeroberfläche wurde mit Xanthen-Fluorophoren chemisch umgesetzt. Da die Farbstoff-gekoppelten Folien nur geringe Fluoreszenz aufwiesen, wurden zwei Wege zur möglichen Entkopplung der Farbstoffe von der Oberfläche und damit zur Erhöhung der Fluoreszenzintensität getestet. Als erstes wurde ein Spacer durch die Umsetzung der primären Aminogruppen mit Glutaraldehyd und der nachfolgenden Kettenverlängerung mit Diaminohexan eingeführt. Diese nachfolgende Reaktion ergab eine spacergebundene NH2-Oberfläche, die analog der Allylaminschicht mit den Farbstoffen umgesetzt wurde. Als weiterer Weg wurde der Zusatz einer geeigneten Käfigverbindung, des Cucurbit[6]urils, getestet. Die spacergebundenen und zusätzlich mit Cucurbituril modifizierten aminofunktionellen Oberflächen zeigten nach der Farbstoffankopplung eine verbesserte Fluoreszenzintensität. KW - Fluoreszenz KW - Spacer KW - Cucurbituril PY - 2007 U6 - https://doi.org/10.1002/vipr.200700329 SN - 0947-076X SN - 1522-2454 VL - 19 IS - 5 SP - 31 EP - 37 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-16000 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoffmann, Katrin A1 - Mix, Renate A1 - Resch-Genger, Ute A1 - Friedrich, Jörg Florian T1 - Monitoring of Amino Functionalities on Plasma-Chemically Modified Polypropylene Supports with a Chromogenic and Fluorogenic Pyrylium Reporter N2 - A straightforward strategy toward the sensitive fluorometric detection of primary amino groups on plasma-chemically modified polypropylene supports is presented, exploiting the transformation of the sterically nonhindered pyrylium dye Py-1 into its pyridinium counterpart. The reaction-induced blue-shifted absorption and emission bands and an increased fluorescence quantum yield provide the basis for the spectroscopic distinction between covalently bound and free, that is, nonspecifically adsorbed label molecules. With this label, for the first time, plasma-chemically introduced amino functionalities could be monitored on the surface of a polymer film employing fluorescence spectroscopy and confocal laser scanning microscopy. KW - Fluorescence spectroscopy KW - Surface characterization KW - Covalent labeling KW - Plasma modification KW - Fluorescent label PY - 2007 UR - http://pubs.acs.org/cgi-bin/abstract.cgi/langd5/2007/23/i16/abs/la7004908.html SN - 0743-7463 SN - 1520-5827 VL - 23 IS - 16 SP - 8411 EP - 8416 PB - American Chemical Society CY - Washington, DC AN - OPUS4-15717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoffmann, Katrin A1 - Mix, Renate A1 - Resch-Genger, Ute A1 - Friedrich, Jörg Florian T1 - Fluorescence Measurements on Functionalized Polymer Surfaces - Problems and Troubleshooting KW - Fluorescence spectroscopy KW - Polymer functionalization KW - Surface labeling KW - Pyrylium label PY - 2008 U6 - https://doi.org/10.1196/annals.1430.015 SN - 0077-8923 SN - 1749-6632 SN - 0094-8500 VL - 1130 SP - 28 EP - 34 PB - New York Academy of Sciences CY - New York, NY AN - OPUS4-17567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoffmann, Katrin A1 - Mix, Renate A1 - Friedrich, Jörg Florian A1 - Buschmann, H.-J. A1 - Resch-Genger, Ute T1 - Anchoring of Fluorophores to plasma-chemically modified polymer surfaces and the effect of Cucurbit[6]uril on dye emission N2 - Polypropylene supports were functionalized by plasma-deposition of polymeric allylamine layers. The surface amino groups generated were wet-chemically reacted with xanthene dyes resulting in fluorescent polymer films. The effect of polymer-attachment of the dyes on their emission features was studied fluorometrically and different methods were tested to improve the fluorescence properties of the films. Modification with cucurbit[6]uril (CB6) yields a moderately enhanced fluorescence as well as an improved photostability. The observed effect is most likely due to CB6-induced rigidization of the linker molecules which seems to reduce fluorescence quenching dye–dye and fluorophore–surface interactions. KW - Fluorescence KW - Cucurbituril KW - Surface modification KW - Plasma functionalization KW - Polymer surface KW - Xanthene dyes PY - 2009 U6 - https://doi.org/10.1007/s10895-008-0407-1 SN - 1053-0509 SN - 1573-4994 VL - 19 SP - 229 EP - 237 PB - Plenum Publ. Corp. CY - New York, NY AN - OPUS4-19154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -