TY - CONF A1 - Gildenhaar, Renate T1 - Preparation of Calcium Alkali Phosphate Implants by 3D-Printing T2 - The 22nd Int. Symp. on Cermics in Medicine (BIOCERAMICS 22) CY - Daegu, South Korea DA - 2009-10-26 PY - 2009 AN - OPUS4-19684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Symietz, Christian A1 - Lehmann, Erhard A1 - Gildenhaar, Renate A1 - Krüger, Jörg A1 - Berger, Georg T1 - Femtosecond laser induced fixation of calcium alkali phosphate ceramics on titanium alloy bone implant material N2 - Femtosecond lasers provide a novel method of attaching bioceramic material to a titanium alloy, thereby improving the quality of bone implants. The ultrashort 30 fs laser pulses (790 nm wavelength) penetrate a thin dip-coated layer of fine ceramic powder, while simultaneously melting a surface layer of the underlying metal. The specific adjustment of the laser parameters (pulse energy and number of pulses per spot) avoids unnecessary melting of the bioactive calcium phosphate, and permits a defined thin surface melting of the metal, which in turn is not heated throughout, and therefore maintains its mechanical stability. It is essential to choose laser energy densities that correspond to the interval between the ablation fluences of both materials involved: about 0.1-0.4 J cm-2. In this work, we present the first results of this unusual technique, including laser ablation studies, scanning electron microscopy and optical microscope images, combined with EDX data. KW - Bone implant KW - Bioceramic coating KW - Titanium KW - Calcium phosphate KW - Femtosecond laser PY - 2010 DO - https://doi.org/10.1016/j.actbio.2010.02.016 SN - 1742-7061 VL - 6 IS - 8 SP - 3318 EP - 3324 PB - Elsevier CY - Amsterdam AN - OPUS4-21446 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Winkler, T. A1 - Hoenig, E. A1 - Huber, G. A1 - Janssen, R. A1 - Fritsch, D. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Morlock, M.M. A1 - Schilling, A.F. T1 - Osteoclastic bioresorption of biomaterials: Two- and three-dimensional imaging and quantification N2 - Purpose: Bioresorbable materials have been developed in the hope that the body will replace them with newly formed tissue. The first step of this remodeling process in bone is the bioresorption of the material by osteoclasts. The aim of this study was to analyze osteoclastic resorption of biomaterials in vitro using the commonly used two-dimensional methods of light-microscopy (LM) and scanning electron microscopy (SEM) in comparison with infinite focus microscopy (IFM), a recently developed imaging method allowing for three-dimensional surface analysis. Methods: Human hematopoietic stem cells were cultivated in the presence of the cytokines M-CSF and RANK-L for 4 weeks directly on dentin and a calcium phosphate cement. Osteoclast development was surveyed with standard techniques. After removal of the cells, resorption was characterized and quantified by LM, SEM and IFM. Results: Osteoclast cultures on the biomaterials presented the typical osteoclast-specific markers. On dentin samples LM, SEM as well as IFM allowed for discrimination of resorption. Quantification of the resorbed area showed a linear correlation between the results (LM vs. SEM: r=0.996, p=0.004; SEM vs. IFM: r=0.989, p=0.011; IFM vs. LM: r=0.995). It was not possible to demarcate resorption pits on GB14 using LM or SEM. With IFM, resorption on GB14 could be visualized and quantified two- and three-dimensionally. KW - Biomaterial KW - Three-dimensional KW - IFM KW - Osteoclast KW - Dentin KW - Calcium phosphate PY - 2010 SN - 0391-3988 VL - 33 IS - 4 SP - 198 EP - 203 PB - Wichtig Ed. CY - Milano [u.a.] AN - OPUS4-21621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller-Mai, C.M. A1 - Berger, Georg A1 - Stiller, M. A1 - Gildenhaar, Renate A1 - Jörn, Daniela A1 - Ploska, Ute A1 - Houshmand, A. A1 - Bednarek, A. A1 - Koch, C. A1 - Knabe, C. T1 - Evaluation of degradable bone cements for percutaneous augmentation of bone defects KW - Bone defect KW - Bioactive bone cement KW - Calcium alkali orthophosphates KW - Histology KW - Histomorphometry KW - Knochendefekt KW - Bioaktiver Knochenzement KW - Calciumalkaliorthophosphat KW - Histologie KW - Histomorphometrie PY - 2010 DO - https://doi.org/10.1002/mawe.201000706 SN - 0933-5137 SN - 1521-4052 VL - 41 IS - 12 SP - 1040 EP - 1047 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Symietz, Christian A1 - Lehmann, Erhard A1 - Gildenhaar, Renate A1 - Krüger, Jörg A1 - Berger, Georg T1 - Fixierung resorbierbarer Knochenersatzkeramik auf Ti6Al4V-Implantatmaterial mittels Femtosekundenlaser T2 - 5. Thüringer Grenz- und Oberflächentage und 7. Thüringer Biomaterial-Kolloquium CY - Friedrichroda, Deutschland DA - 2009-09-15 KW - Metallprothese KW - Implantat KW - Knochenersatz KW - Bioaktives Material KW - Lasersintern KW - Femtosekundenlaser PY - 2009 SN - 978-3-00-028446-5 SP - 327 AN - OPUS4-20051 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dombrowski, Felix A1 - Ploska, Ute A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Stiller, M. A1 - Knabe, C. ED - Kim, Sukyoung T1 - Rheological investigations on degradable and figuline calcium alkaline phosphate cements T2 - 22nd International symposium on ceramics in medicine (Bioceramics 22) CY - Daegu, Korea DA - 2009-10-26 KW - Rheology KW - Calcium alkaline phosphate cement KW - Gelatine KW - Composite PY - 2009 SP - 863 EP - 866 AN - OPUS4-20287 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Lehmann, Erhard A1 - Spitzer, Andrea ED - Kim, Sukyoung T1 - Preparation of calcium alkali phosphate implants by 3D-printing T2 - 22nd International symposium on ceramics in medicine (Bioceramics 22) CY - Daegu, Korea DA - 2009-10-26 KW - Bone substitute material KW - Calcium alkali phosphate KW - Resorbable bioceramics KW - 3D-printing process KW - Bending strength PY - 2009 SP - 71 EP - 74 AN - OPUS4-20288 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Winkler, T. A1 - Hoenig, E. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Fritsch, D. A1 - Janssen, R. A1 - Morlock, M.M. A1 - Schilling, A.F. T1 - Volumetric analysis of osteoclastic bioresorption of calcium phosphate ceramics with different solubilities N2 - Commonly, to determine osteoclastic resorption of biomaterials only the resorbed area is measured. The depth of the resorption pit, however, may also be important for the performance of a material. To generate such data we used two calcium phosphate ceramics (Ca10 and Ca2). The solubility of the materials was determined according to DIN EN ISO 10993-14. They were scanned three-dimensionally using infinite focus microscopy and subsequently cultivated for 4 weeks in simulated body fluid without (control) or with human osteoclasts. After this cultivation period osteoclasts number was determined and surface changes were evaluated two- and three-dimensionally. Ca10 and Ca2 showed solubilities of 11.0 ± 0.5 and 23.0 ± 2.2 mg g-1, respectively. Both materials induced a significant increase in osteoclast number. While Ca10 did not show osteoclastic resorption, Ca2 showed an increased pit area and pit volume due to osteoclastic action. This was caused by an increased average pit depth and an increased number of pits, while the average area of single pits did not change significantly. The deduced volumetric osteoclastic resorption rate (vORR) of Ca2 (0.01–0.02 µm3 µm-2 day-1) was lower than the remodelling speed observed in vivo (0.08 µm3 µm-2 day-1), which is in line with the observation that implanted resorbable materials remain in the body longer than originally expected. Determination of volumetric indices of osteoclastic resorption might be valuable in obtaining additional information about cellular resorption of bone substitute materials. This may help facilitate the development of novel materials for bone substitution. KW - Biodegradation KW - Surface analysis KW - Simulated body fluid KW - Osteoclasts KW - Calcium phosphate ceramics PY - 2010 DO - https://doi.org/10.1016/j.actbio.2010.04.015 SN - 1742-7061 VL - 6 IS - 10 SP - 4127 EP - 4135 PB - Elsevier CY - Amsterdam AN - OPUS4-22554 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Quillard, S. A1 - Paris, M. A1 - Deniard, P. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Obadia, L. A1 - Bouler, J.-M. T1 - Structural and spectroscopic characterization of a series of potassium- and/or sodium-substituted beta-tricalcium phosphate N2 - In this paper, we report X-ray diffraction investigations as well as Raman and solid-state 31P and 23Na magic angle spinning nuclear magnetic resonance (NMR) characterization of three series of calcium orthophosphates. The general formulae of the studied compounds are Ca10.5-x/2Mx(PO4)7, where M = K or Na and x = 0, 0.25, 0.50, 0.75, 1.0; and Ca10KxNa1-x(PO4)7, where x = 0, 0.25, 0.5, 0.75, 1.0. These calcium orthophosphates are found to be isostructural with β-tricalcium phosphate (β-TCP, Ca3(PO4)2) with the substitution of some calcium sites by potassium and/or sodium cations. The unit cell parameters vary continuously with the level of substitution, a characteristic of these solid solutions. The Raman spectra show the different vibrational bands of the phosphate groups PO4, while the NMR chemical shifts are sensitive to the non-equivalent phosphorus and sodium ions present in these substituted samples. As both Raman and NMR spectroscopies are local probes, they offer tools to distinguish between these different phosphorus and phosphate groups, according to their structural site and local environment, especially the type of cation substituent. A convenient decomposition of the Raman and NMR spectra into Gaussian–Lorentzian components leads us to propose an assignment of the main observed bands of these substituted β-TCPs. KW - Bioceramics KW - Tricalcium phosphate KW - X-ray diffraction KW - Raman spectroscopy KW - Solid-state NMR spectroscopy PY - 2011 DO - https://doi.org/10.1016/j.actbio.2010.12.016 SN - 1742-7061 VL - 7 IS - 4 SP - 1844 EP - 1852 PB - Elsevier CY - Amsterdam AN - OPUS4-23405 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Symietz, Christian A1 - Lehmann, Erhard A1 - Gildenhaar, Renate A1 - Koter, Robert A1 - Berger, Georg A1 - Krüger, Jörg T1 - Fixation of bioactive calcium alkali phosphate on Ti6Al4V implant material with femtosecond laser pulses N2 - Bone implants made of metal, often titanium or the titanium alloy Ti6Al4V, need to be surface treated to become bioactive. This enables the formation of a firm and durable connection of the prosthesis with the living bone. We present a new method to uniformly cover Ti6Al4V with a thin layer of ceramics that imitates bone material. These calcium alkali phosphates, called GB14 and Ca10, are applied to the metal by dip coating of metal plates into an aqueous slurry containing the fine ceramic powder. The dried samples are illuminated with the 790 nm radiation of a pulsed femtosecond laser. If the laser fluence is set to a value just below the ablation threshold of the ceramic (ca. 0.4 J/cm²) the 30 fs laser pulses penetrate the partly transparent ceramic layer of 20–40 µm thickness. The remaining laser fluence at the ceramic–metal interface is still high enough to generate a thin metal melt layer leading to the ceramic fixation on the metal. The laser processing step is only possible because Ti6Al4V has a lower ablation threshold (between 0.1 and 0.15 J/cm²) than the ceramic material. After laser treatment in a fluence range between 0.1 and 0.4 J/cm², only the particles in contact with the metal withstand a post-laser treatment (ultrasonic cleaning). The non-irradiated rest of the layer is washed off. In this work, we present results of a successful ceramic fixation extending over larger areas. This is fundamental for future applications of arbitrarily shaped implants. KW - Bone implant KW - Bioceramic coating KW - Titanium KW - Calcium phosphate KW - Femtosecond laser PY - 2011 DO - https://doi.org/10.1016/j.apsusc.2010.10.046 SN - 0169-4332 SN - 1873-5584 VL - 257 IS - 12 SP - 5208 EP - 5212 PB - North-Holland CY - Amsterdam AN - OPUS4-23310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bernstein, A. A1 - Nöbel, D. A1 - Mayr, H.O. A1 - Göbel, F. A1 - Berger, Georg A1 - Ploska, Ute A1 - Gildenhaar, Renate A1 - Brandt, J. T1 - Inhibition of Mineralization by a Calcium Zirconium Phosphate Coating N2 - Bioactive ceramics used as coating materials combine the conductive properties of a bioceramic with the mechanical stability of the metal implant. We studied a calcium zirconium phosphate-containing coating material, FA-CZP [Ca5(PO4)3F, CaZr4(PO4)6], that is relatively insoluble in the biological milieu. The reaction of bone to this material was investigated histologically and histomorphometrically in an animal trial. Cylindrical Ti6Al4V specimens that had been coated with FA-CZP by plasma spraying were implanted in the femoral condyles of rabbits. The implants were left in place for 2, 4, 6, 12, and 14 weeks. FA-CZP led to impaired mineralization of the newly formed bone at the interface. Noncalcified osteoid was found throughout the whole study period. The layer seemed to become thicker with time. The mineralization disorder is evidently caused by zirconium ions. The presence of zirconium in the osteoid in contact with the implant was demonstrated by means of two different staining methods. KW - Mineralization KW - Toxicity KW - Coating(s) KW - Ceramic KW - Bone PY - 2008 DO - https://doi.org/10.1002/jbm.b.31037 SN - 1552-4973 SN - 1552-4981 VL - 86B IS - 2 SP - 422 EP - 429 PB - Wiley CY - Hoboken, NJ AN - OPUS4-17801 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bernstein, A. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Mayr, H.O. T1 - In vitro an in vivo behaviour of a ceramic with interconnected macroporosity KW - Ceramics KW - Porosity KW - Biomaterial KW - Bone KW - Biocompatibility KW - Surface reaction PY - 2009 SN - 1013-9826 VL - 396-398 SP - 19 EP - 22 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-17880 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jörn, Daniela A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Stiller, M. A1 - Knabe, C. T1 - Behaviour of calcium alkali orthophosphate cements under simulated implantation conditions KW - Calcium alkali orthophosphates KW - Calcium phosphate cement KW - Compressive strength KW - Setting times PY - 2009 SN - 1013-9826 VL - 396-398 SP - 213 EP - 216 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-17881 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krahl, Thoralf A1 - Gildenhaar, Renate A1 - Kenning, Hilke A1 - Berger, Georg A1 - Jäger, Christian ED - Kim, Sukyoung T1 - Predicting phase compositions of samples in the ternary system Ca2KNa(PO4)2-Ca3(PO4)2-Ca2P2O7 using 31P MAS NMR T2 - 22nd International symposium on ceramics in medicine (Bioceramics 22) CY - Daegu, Korea DA - 2009-10-26 KW - NMR KW - Bone substitute materials KW - Alkali calcium phosphates KW - TCP KW - Ca10(K,NA)(PO4)7 PY - 2009 SP - 11 EP - 14 AN - OPUS4-20656 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Ducheyne, P. A1 - Stiller, M. T1 - Novel, rapidly resorbable bioceramic bone grafts produce a major osteogenic effect - the pre-clinical evidence KW - Calcium phosphates KW - Bone substitute materials KW - Bioactive ceramics KW - Biodegradability PY - 2010 DO - https://doi.org/10.4028/www.scientific.net/AST.76.214 SN - 1662-0356 VL - 76 SP - 214 EP - 223 PB - Techna CY - Faenza AN - OPUS4-22028 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gildenhaar, Renate A1 - Bernstein, A. A1 - Berger, Georg A1 - Hein, W. T1 - In-vitro Surface Reactions of Bioceramic Materials KW - Ceramics KW - Coating KW - Biomaterial KW - Bone KW - Biocompatibility KW - Surface reaction PY - 2004 SN - 1013-9826 VL - 254-256 SP - 407 EP - 410 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-2749 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zreiqat, H. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Knabe, Ch. T1 - The Functional Expression of Human Bone-Derived Cells Grown on Rapidly Resorbable Calcium Phosphate Ceramics KW - Calcium phosphate ceramics KW - Human bone-derived cells KW - Cell-biomaterial interactions KW - Bone-substitutes KW - in situ hybridization PY - 2004 UR - http://www.scientific.net/1013-9826/ SN - 1013-9826 VL - 254-256 SP - 1059 EP - 1062 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-2750 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate T1 - The Functional Expression of Osteoblasts Grown on Rapid Resorbable Calcium Phosphates T2 - Key Engineering Materials / Bioceramics CY - Sydney, Australia DA - 2002-12-04 PY - 2002 AN - OPUS4-3083 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate T1 - Biocompatibility screening of different calcium phosphate ceramics T2 - Internationales Symposium "Interface Biology of Implants" CY - Rostock, Germany DA - 2003-05-14 PY - 2003 AN - OPUS4-4710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate T1 - In-vitro surface reaction of plasma sprayed bioceramics T2 - Internationales Symposium "Interface Biology of Implants CY - Rostock, Germany DA - 2003-05-14 PY - 2003 AN - OPUS4-4725 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate T1 - Neue Biokeramiken für den Plasmaspritzprozess T2 - 14. Symposium "Verbundwerkstoffe und Werkstoffverbunde" CY - Vienna, Austria DA - 2003-07-02 PY - 2003 AN - OPUS4-4726 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate T1 - Neue Biokeramiken für Implantatbeschichtungen T2 - Deutscher Orthopädiekongress 2003 CY - Berlin, Germany DA - 2003-11-13 PY - 2003 AN - OPUS4-4730 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate T1 - In-vitro surface reactions of bioceramic materials T2 - Bioceramics 16; 16th International Symposium on Ceramics in Medicine CY - Oporto, Portugal DA - 2003-11-06 PY - 2003 AN - OPUS4-4731 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Pauli, Jutta A1 - Marx, Heidi T1 - Preparation and Characterization of New Self-Setting Calcium Phosphate Cements Based on Alkali Containing Orthophosphates KW - P-31-NMR Investigation KW - Ca2KNa(PO4)2 KW - Calcium Alkali Orthophosphates KW - Calcium Phosphate Cement KW - Self-Setting Cement PY - 2005 SN - 1013-9826 VL - 284-286 SP - 121 EP - 124 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-5493 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ploska, Ute A1 - Gildenhaar, Renate A1 - Berger, Georg T1 - Resorbable Biomaterials Based on Calcium Phosphates: Determination of In Vitro Solubility Applying the ISO 10993-14 (First Experiences) KW - Calcium Phosphate KW - In Vitro Solubility KW - ISO Standard KW - Resorbable PY - 2005 SN - 1013-9826 VL - 284-286 SP - 485 EP - 488 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-5494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Bernstein, A. A1 - Lehmann, Erhard ED - Degischer, H.-P. T1 - Neue Biokeramiken für den Plasmaspritzprozess T2 - 14. Symposium Verbundwerkstoffe und Werkstoffverbunde CY - Wien, Österreich DA - 2003-07-02 PY - 2003 SN - 3-527-30762-1 SP - 732 EP - 737 PB - Wiley-VCH CY - Weinheim AN - OPUS4-5983 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bernstein, A. A1 - Brandt, J. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Hein, W. T1 - The Bone Reaction to Ceramic Coated Pins - Animal Study KW - Biocompatibility KW - Biomaterial KW - Bone KW - Ceramics KW - Coating KW - Surface Reaction KW - Biokeramik KW - Beschichtung KW - Knochenersatz KW - Biomompatibilität PY - 2005 SN - 1013-9826 VL - 284-286 SP - 179 EP - 182 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-5495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bernstein, A. A1 - Berger, Georg A1 - Brandt, J. A1 - Wenkel, R. A1 - Gildenhaar, Renate A1 - Zielezinski, T. A1 - Nöbel, D. T1 - Calciumtitanat (Ca4Ti3O10) - ein neues Material für Implantatbeschichtungen KW - Implantatbeschichtung KW - Calciumtitanat KW - Bioaktivität KW - Knochenkontakt KW - Biomaterial-bone-coating of an implant PY - 2004 SN - 1616-0177 SN - 0011-8656 VL - 5 IS - 4 SP - 242 EP - 248 PB - Verl. Neuer Merkur CY - München AN - OPUS4-6010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Howlett, C. R. A1 - Markovic, B. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Zreiqat, H. T1 - The Functional Expression of Osteoblasts Grown on Rapid Resorbable Calcium Phosphates T2 - 15th International Symposium on Ceramics in Medicine ; 15th Annual meeting of the International Society for Ceramics in Medicine ; 15th Bioceramics CY - Sydney, NSW, Australia DA - 2002-12-04 KW - Guided bone regeneration KW - Calcium alkali orthophosphates KW - Osteoblasts KW - Cell differentiation PY - 2003 SN - 1013-9826 VL - 240-242 SP - 679 EP - 682 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-2115 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Bernstein, A. A1 - Hein, W. T1 - In-Vitro Surface Reactions of Plasma Sprayed Bioceramics T2 - International Symposium "Interface Biology of Implants" CY - Rostock, Germany DA - 2003-05-15 PY - 2003 SN - 1616-0177 SN - 0011-8656 VL - 4 IS - 2 SP - 106 PB - Verl. Neuer Merkur CY - München AN - OPUS4-2595 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bernstein, A. A1 - Gildenhaar, Renate A1 - Nöbel, D. A1 - Berger, Georg T1 - Biocompatibility screening of different calcium phosphate ceramics PY - 2003 SN - 1616-0177 SN - 0011-8656 VL - 4 IS - 2 SP - 89 PB - Verl. Neuer Merkur CY - München AN - OPUS4-2596 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gross, U. A1 - Müller-Mai, C. A1 - Knabe, C. A1 - Berger, Georg A1 - Ploska, Ute A1 - Gildenhaar, Renate ED - Vincenzini, P. T1 - Animal experiments with biomaterials for direct bone contact displaying higher or lower solubility in comparison to TCP and HA products T2 - 10th International Ceramics Congress ; 3rd Forum on New Materials ; 10th CIMTEC 2002 CY - Florence, Italy DA - 2002-07-14 PY - 2004 SP - 369 EP - 376 PB - Techna CY - Faenza AN - OPUS4-3500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, Ch. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Klar, F. A1 - Zreiqat, H. T1 - The modulation of osteogenesis in vitro by calcium titanium phosphate coatings N2 - Calcium phosphate coated titanium and titanium alloy are widely used as dental and orthopaedic implants. This study examines the effect of novel calcium titanium and calcium titanium zirconium phosphates suitable for plasma-spraying onto titanium substrata on the expression of bone-related genes and proteins by human bone-derived cells (HBDC) and compares this behavior to that on native titanium and hydroxyapatite-coated titanium. Test materials were an acid etched and sand-blasted titanium surface (Ti-DPS), a plasma-sprayed hydroxyapatite coating (HA), and five materials which were created from CaTi4(PO4)6 (CTP) and CaZr4(PO4)6 (CZP): sintered CaTi4(PO4)6 (CTP-S1), sintered 46CaO·23TiO2·31P2O5 (CTP-S2), sintered CaTiZr3(PO4)6, (CTZP-S1), sintered 46CaO·23ZrO2·31P2O5 (CTZP-S2) and sintered 55CaO·20TiO2·31P2O5 (CTP-S3). HBDC were grown on the substrata for 3, 7, 14 and 21 d, counted and probed for various mRNAs and proteins (type I collagen, osteocalcin, osteopontin, osteonectin, alkaline phosphatase and bone sialoprotein). All substrates significantly affected cellular growth and the temporal expression of an array of bone-related genes and proteins. At 14 and 21 d, cells on CTP-S3 displayed significantly enhanced expression of all osteogenic mRNAs. Surfaces of CTP-S1 and CTP-S3 had the most effect on osteoblastic differentiation inducing a greater expression of an array of osteogenic markers than recorded for cells grown on Ti-DPS and HA, suggesting that these novel materials may possess a higher potency to enhance osteogenesis. KW - Calcium phosphate coatings KW - Osteoblast KW - In vitro test KW - In situ hybridization KW - Osteogenesis PY - 2004 DO - https://doi.org/10.1016/j.biomaterials.2004.01.059 SN - 0142-9612 VL - 25 IS - 20 SP - 4911 EP - 4919 PB - Elsevier CY - Oxford AN - OPUS4-3501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Meyer, J. A1 - Howlett, C. A1 - Markovic, B. A1 - Zreiqat, H. T1 - Effect of rapidly resorbable calcium phosphates and a calcium phosphate bone cement on the expression of bone-related genes and proteins in vitro N2 - The use of biodegradable bone substitutes is advantageous for alveolar ridge augmentation because it avoids second-site surgery for autograft harvesting. This study examines the effect of novel, rapidly resorbable calcium phosphates and a calcium phosphate bone cement on the expression of bone-related genes and proteins by human bone-derived cells (HBDCs) and compares this behavior to that of tricalciumphosphate (TCP). Test materials were -TCP, two materials with a crystalline phase Ca2KNa(PO4)2 and with a small amorphous portion containing either magnesium potassium phosphate (material denominated GB14) or silica phosphate (material denominated GB9), and a calcium phosphate bone cement (material denominated Biocement D). HBDCs were grown on the substrata for 3, 7, 14, and 21 days, counted, and probed for various mRNAs and proteins (type I collagen, osteocalcin, osteopontin, osteonectin, alkaline phosphatase, and bone sialoprotein). All substrates supported continuous cellular growth for 21 days. In the presence of GB14 and Biocement D specimens cell proliferation was reduced and cell differentiation increased. At day 21, the greatest number of cells was found on GB9 expressing significantly higher levels of bone-related proteins than cells grown on all other surfaces. Because all novel materials facilitated the expression of the osteoblastic phenotype at least as much as TCP and the polystyrene control, these biomaterials can be regarded as excellent candidate bone substitute materials. GB9 induced the highest proliferation and cellular differentiation after 21 days of incubation, suggesting that this material may possess a higher potency for enhancing osteogenesis than TCP. © 2004 Wiley Periodicals, Inc. J Biomed Mater Res 69A: 145-154, 2004 KW - Calcium phosphate ceramics KW - Human bone-derived cells KW - Cell-biomaterial interactions KW - Calcium phosphate cements KW - In situ hybridization PY - 2004 DO - https://doi.org/10.1002/jbm.a.20131 SN - 1549-3296 SN - 1552-4965 VL - 69 IS - 1 SP - 145 EP - 154 PB - Wiley CY - Hoboken, NJ AN - OPUS4-3502 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, Ch. A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Howlett, C.R. A1 - Markovic, B. A1 - Zreiqat, H. T1 - The functional expression of human bone-derived cells grown on rapidly resorbable calcium phosphate ceramics N2 - The use of biodegradable bone substitutes is advantageous for alveolar ridge augmentation, since it avoids second-site surgery for autograft harvesting. This study examines the effect of novel, rapidly resorbable calcium phosphates on the expression of bone-related genes and proteins by human bone-derived cells (HBDC) and compares this behavior to that of tricalciumphosphate (TCP). Test materials were a-TCP, and four materials which were created from ß-Rhenanite and its derivatives: R1-ß-Rhenanite (CaNaPO4); R1/M2 composed of CaNaPO4 and MgNaPO4; R1+SiO2 composed of CaNaPO4 and 9% SiO2 (wt%); and R17-Ca2KNa(PO4)2. HBDC were grown on the substrata for 3, 5, 7, 14 and 21 days, counted and probed for various mRNAs and proteins (Type I collagen, osteocalcin, osteopontin, osteonectin, alkaline phosphatase and bone sialoprotein). All substrata supported continuous cellular growth for 21 days. At day 21, surfaces of R1+SiO2 and R17 had the highest number of HBDC. At 14 and 21 days, cells on R1 and on R1+SiO2 displayed significantly enhanced expression of all osteogenic proteins. Since all novel calcium phosphates supported cellular proliferation together with expression of bone-related proteins at least as much as TCP, these ceramics can be regarded as potential bone substitutes. R1 and R1+SiO2 had the most effect on osteoblastic differentiation, thus suggesting that these materials may possess a higher potency to enhance osteogenesis than TCP. KW - Calcium phosphate ceramics KW - Human bone-derived cells KW - Cell-biomaterial interactions KW - Bone substitutes KW - In situ hybridization PY - 2004 DO - https://doi.org/10.1016/S0142-9612(03)00525-8 SN - 0142-9612 VL - 25 IS - 2 SP - 335 EP - 344 PB - Elsevier CY - Oxford AN - OPUS4-2957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Lehmann, Erhard A1 - Stiller, M. A1 - Koch, C. A1 - Ducheyne, P. A1 - Rack, A. A1 - Seligmann, H. A1 - Jonscher, S. A1 - Knabe, C. T1 - A comparative study of the biodegradability of calcium-alkali-orthophosphate ceramics in vitro and in vivo KW - Calcium-alkali-orthophosphate KW - Solubility KW - Biodegradability PY - 2007 SN - 1013-9826 VL - 330-332 SP - 63 EP - 66 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-14528 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bernstein, A. A1 - Nöbel, D. A1 - Mayr, H.O. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Ploska, Ute A1 - Brandt, J. T1 - Influence of Calcium Zirconium Phosphate Containing Coatings on Mineralization of Bone KW - Ceramics KW - Coating KW - Biomaterial KW - Bone KW - Biocompatibility KW - Surface reaction PY - 2008 SN - 1013-9826 VL - 361-363 SP - 641 EP - 644 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-15900 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Lehmann, Erhard A1 - Knabe, C. T1 - Development of Alkali Containing Calcium Phosphate Cements KW - Calcium phosphate cement KW - Calcium potassium sodium phosphate KW - Potassium containing apatite KW - Bone substitute materials PY - 2008 SN - 1013-9826 VL - 361-363 SP - 331 EP - 334 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-15902 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate T1 - Development of alkali containing calcium phosphate cements T2 - 20th Int. Symposium of Ceramics in Medicine (Bioceramics 20) CY - Nantes, France DA - 2007-10-24 PY - 2007 AN - OPUS4-15862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Houshmand, A. A1 - Berger, Georg A1 - Ducheyne, P. A1 - Gildenhaar, Renate A1 - Kranz, I. A1 - Stiller, M. T1 - Effect of rapidly resorbable bone substitute materials on the temporal expression of the osteoblastic phenotype in vitro N2 - Ideally, bioactive ceramics for use in alveolar ridge augmentation should possess the ability to activate bone formation and, thus, cause the differentiation of osteoprogenitor cells into osteoblasts at their surfaces. Therefore, in order to evaluate the osteogenic potential of novel bone substitute materials, it is important to examine their effect on osteoblastic differentiation. This study examines the effect of rapidly resorbable calcium-alkali-orthophosphates on osteoblastic phenotype expression and compares this behavior to that of β-tricalcium phosphate (TCP) and bioactive glass 45S5. Test materials were three materials (denominated GB14, GB9, GB9/25) with a crystalline phase Ca2KNa(PO4)2 and with a small amorphous portion containing either magnesium potassium phosphate (GB14) or silica phosphate (GB9 and GB9/25, which also contains Ca2P2O7); and a material with a novel crystalline phase Ca10[K/Na](PO4)7 (material denominated 352i). SaOS-2 human bone cells were grown on the substrata for 3, 7, 14, and 21 days, counted, and probed for an array of osteogenic markers. GB9 had the greatest stimulatory effect on osteoblastic proliferation and differentiation, suggesting that this material possesses the highest potency to enhance osteogenesis. GB14 and 352i supported osteoblast differentiation to the same or a higher degree than TCP, whereas, similar to bioactive glass 45S5, GB9/25 displayed a greater stimulatory effect on osteoblastic phenotype expression, indicating that GB9/25 is also an excellent material for promoting osteogenesis. KW - Bone substitute materials KW - Calcium-alkali-orthophosphate ceramics KW - SaOS-2 cells KW - Osteoblast differentiation KW - Bioactive glass PY - 2008 DO - https://doi.org/10.1002/jbm.a.31383 SN - 1549-3296 SN - 1552-4965 VL - 84A IS - 4 SP - 856 EP - 868 PB - Wiley CY - Hoboken, NJ AN - OPUS4-16658 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate T1 - Calcium alkaline phosphate scaffolds for bone regeneration 3D-fabricated by additive manufacturing T2 - 23rd Symp. and Annual Meeting of Intern. Soc. for Ceramics in Medicine (ISCM) CY - Istanbul, Turkey DA - 2011-11-04 PY - 2011 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. AN - OPUS4-24863 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gildenhaar, Renate A1 - Knabe, C. A1 - Wirth, Cynthia A1 - Linow, Ulf A1 - Houshmand, A. A1 - Berger, Georg T1 - Calcium alkaline phosphate scaffolds for bone regeneration 3D-fabricated by additive manufacturing N2 - Calcium alkaline phosphate granulates can be used for substitution of several bone defects but for the reconstruction of large skeletal parts in the maxillofacial and orthopaedic fields fitted scaffolds are preferable. Within the additive manufacturing methods, the 3D printing process offers exciting opportunities to generate defined porous scaffolds. We used a R1 printer from ProMetal Company, USA, for producing scaffolds directly from a ceramic powder. For this direct free form fabrication technology the powder has to possess a lot of specific properties both for the generation of a stable green body and also for the subsequent sintering preparation. For this printing process we prepared different granules in a fluidized bed process containing Ca2KNa(PO4)2 as main crystalline phase. Granules were characterized by different methods and several sieve fractions were used for preparing disc like and cylindrical parts. The suitability of granules for this printing process was determined by porosity and strength of produced bodies. Next to granules' performance both of these properties can be directly influenced by 3D printing process parameters. With knowledge of suitable process parameters scaffolds with different porosity in a respective desired design can be created. In this study, cylindrical scaffolds with graded porosity were produced for bone regeneration of segmental defects in maxillofacial surgery and dental implantology by tissue engineering. KW - 3D printing KW - Calcium alkaline phosphates KW - Ceramic scaffolds KW - Oral surgery PY - 2012 DO - https://doi.org/10.4028/www.scientific.net/KEM.493-494.849 SN - 1013-9826 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. VL - 493-494 SP - 849 EP - 854 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-24989 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Quillard, S. A1 - Mellier, C. A1 - Gildenhaar, Renate A1 - Hervelin, J. A1 - Deniard, P. A1 - Berger, Georg A1 - Bouler, J.-M. T1 - Raman and infrared studies of substituted ß-TCP N2 - Several substituted β-tricalcium phosphates have been prepared with different cations (monovalent, divalent and trivalent) and at various levels of substitution. Structural investigations have proved that fewer than ~10% wt substitution, the substituted compounds are isostructural to β-TCP, leading to solid solutions. These samples have been characterized by infrared and Raman spectroscopies. The vibrational spectra show mainly the bands related to the vibrations of PO43- tetrahedrons present in the structure. As Raman scattering and infrared absorption are local probes, the bands are sensitive to the local environment of the distinct tetrahedrons, related to the site of substitution and to the nature of the cations. KW - Tricalcium phosphates KW - Ionic substitution KW - Vibrational spectroscopies PY - 2012 DO - https://doi.org/10.4028/www.scientific.net/KEM.493-494.225 SN - 1013-9826 VL - 493-494 SP - 225 EP - 230 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-24954 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Zreiqat, H. T1 - The functional expression of human osteoblasts grown on resorbable calcium phosphates N2 - The use of biodegradable bone substitutes is advantageous for alveolar ridge augmentation, since it avoids second-site surgery for autograft harvesting. This study examines the effect of novel, rapidly resorbable calcium phosphates on the expression of bone-related genes and proteins by human bone derived cells (HBDC) and compares this behavior to that of tricalciumphosphate (TCP). Test materials were -TCP, a newly synthesized chemical Ca2KNa(PO4)2 (material denominated R17), two glassy crystalline materials with a crystalline phase Ca2KNa(PO4)2 and in addition a small amorphous portion containing either magnesium potassium phosphate (material denominated GB14) or silica phosphate (material denominated GB9). HBDC was grown on the substrates for 3, 5, 7, 14 and 21 days, counted and probed for various mRNAs and proteins (collagen type I, osteocalcin, osteopontin, osteonectin, alkaline phosphatase and bone sialoprotein). All substrates supported continuous cellular growth for 21 days. At day 21, R17, GB9, TCP and GB14. T2 - 15th International Symposium on Ceramics in Medicine CY - Sydney, NSW, Australia DA - 2002-12-04 PY - 2002 DO - https://doi.org/10.4028/www.scientific.net/KEM.240-242.679 SN - 1013-9826 VL - 240-242 SP - 679 EP - 682 PB - Trans Tech Publ. CY - Aedermannsdorf AN - OPUS4-1891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Reif, D. A1 - Zreiqat, H. T1 - The functional expression of human bone derived cells grown on resorbable bioactive glass ceramics T2 - 28th Annual Meeting & Exposition of the Society for Biomaterials CY - Tampa, FL, USA DA - 2002-04-23 PY - 2002 SP - 706 PB - Society for Biomaterials AN - OPUS4-1892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gross, U. A1 - Müller-Mai, C. A1 - Knabe, C. A1 - Berger, Georg A1 - Ploska, Ute A1 - Gildenhaar, Renate ED - Vincenzini, P. T1 - Animal experiments with biomaterials for direct bone contact which possess in comparison to TCP and HA products higher or lower solubility T2 - 10th International Ceramics Congress ; 3rd Forum on New Materials ; 10th CIMTEC 2002 CY - Florence, Italy DA - 2002-07-14 PY - 2003 PB - Techna CY - Faenza AN - OPUS4-1894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. A1 - Howlett, C.R. A1 - Markovic, B. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Zreiqat, H. T1 - Beeinflussung der Gen- und Proteinexpression von Osteoblasten durch bioaktive resorbierbare Glaskeramiken T2 - Bericht der 2. gemeinsamen Jahrestagung der Deutschen Gesellschaft für Implantologie im Zahn-, Mund- und Kieferbereich, der Österreichischen Gesellschaft für orale Chirurgie und Implantologie sowie der Schweizerischen Gesellschaft für orale Implantologie CY - München, Deutschland DA - 2002-12-05 PY - 2002 AN - OPUS4-1898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Klar, F. A1 - Zreiqat, H. T1 - The Effect of Different Dental Titanium and Calcium Phosphate Implant Surfaces on the Expression of Bone-Related Genes and Proteins in vitro T2 - 6th World Biomaterials Congress CY - Kamuela, Big Island, HI, USA DA - 2000-05-15 KW - Dental Implant Surfaces PY - 2000 VL - 1 SP - 238 PB - Society for Biomaterials CY - Minneapolis, Minn. AN - OPUS4-869 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Knabe, C. A1 - Howlett, C. A1 - Markovic, B. A1 - Reif, D. A1 - Zreiqat, H. T1 - The Functional Expression of Human Bone Derived Cells Grown on Rapidly Resorbable Calcium Phosphate Ceramics T2 - 6th World Biomaterials Congress CY - Kamuela, Big Island, HI, USA DA - 2000-05-15 KW - Calcium Phosphate Ceramics PY - 2000 SP - 970 PB - Society for Biomaterials CY - Minneapolis, Minn. AN - OPUS4-870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Ploska, Ute T1 - Rapid resorbable, glassy crystalline materials on the basis of calcium alkali orthophosphates KW - Keramik KW - Material kristallin, glasartig KW - Resorbtion KW - Knochenersatz PY - 1995 SN - 0142-9612 VL - 16 SP - 1241 EP - 1248 PB - Elsevier CY - Oxford AN - OPUS4-622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Berger, Georg A1 - Gildenhaar, Renate T1 - Resorbierbarer Knochenersatz auf der Basis von Calciumphosphaten N2 - Neben Hydroxylapatit (HAp) findet verstärkt auch Tricalciumphosphat (TCP) Anwendung als Knochenersatzmaterial. In der Literatur finden sich widersprüchliche Angaben zur Löslichkeit von TCP. Bedingt durch unterschiedliche Darstellungsverfahren ergeben sich verschiedenartige Materialbeschaffenheiten, die sich erst nach der Implantation durch ein differenziertes Resorptions-verhalten dokumentieren (partikulärer Abbau, chemischer Lösungsprozeß). Zur Klärung derartiger Zusammenhänge in vitro wurden 2 Methoden zur Bestimmung des Lösungsverhaltens untersucht. Dafür wurden TCP-Proben aus verschiedenen Rohstoffen dargestellt, nach unterschiedlichen Temperaturregimen behandelt und/oder einer Nachbehandlung mit Phosphorsäure unterzogen. Diese Materialien wurden vor allem mittels Röntgenpulverdiffraktometrie und Rasterelektronenmikroskopie charakterisiert. In anschließenden Löslichkeitsuntersuchungen wurden die optimalen Versuchsparameter (Lösungsmittel, Konzentration, Verhältnis Lösungsmittelmenge zur Lösungsoberfläche usw.) sowie geeignete Meßgrößen (Masseverlust, Ionenkonzentration) ermittelt. Die In-vitro-Löslichkeit erwies sich bei sorgfältiger Auswahl der Versuchsbedingungen als sehr wirkungsvolle Charakterisierungsmöglichkeit, die auf synthesebedingte chemische und morphologische Unterschiede sehr empfindlich reagiert. Translated Abstract Resorbable bone substitution on the basis of calcium phosphates Besides hydroxyapatite (HAp), tricalcium phosphate is increasingly being used as bone substitution material. In literature there are contradictory claims of the TCP solubility. As a result of are contradictory claims of the TCP solubility. As a result of different manufacturing processes there are altered material properties, which are documented by different resorption behaviour especielly after implantation (particle separation, chemical solvatation). To clarify of such in vitro connections two methods for determining the solubility were investigated. Especially for this case, TCP samples prepared from different raw materials were synthesized. These samples were given different heat treatments and/or posttreatments with phosphoric acid. The materials were characterized above all by using X-ray powder diffraction method and scanning electron microscopy. Following investigations of the solubility lead to optimized testing parameters (solvent, concentration, ratio of solvent's quantity to sample surface, etc.) as well as qualified test parameters (lost of weight, ion concentration). When the test conditions were carefully selected, the in vitro solubillity was proved to be a very effective possibility of materials characterisation which is also very sensitive regarding chemical differences caused by synthesizing or morphological differences. KW - Knochenersatz KW - Calciumphosphat PY - 1995 DO - https://doi.org/10.1002/mawe.19950260711 SN - 0933-5137 SN - 1521-4052 VL - 26 IS - 7 SP - 379 EP - 385 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-623 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Knabe, C. A1 - Gildenhaar, Renate A1 - Berger, R. A1 - Ostapowicz, W. A1 - Fitzner, R. A1 - Radlanski, R. A1 - Gross, U. A1 - Siebert, G. T1 - In vitro examination of novel calcium phosphates using osteogenic cultures T2 - 5th World Biomaterials Congress CY - Toronto, Canada DA - 1996-05-29 KW - In-vitro Untersuchung KW - Kalzium-Phosphat KW - Zahnersatz KW - Knochen PY - 1996 VL - 1 SP - 890 CY - Toronto AN - OPUS4-672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Ploska, Ute ED - Wilson, J. ED - Hench, L. T1 - Rapidly Resorbable Materials Based On A New Phase - CA2KNA(PO4)2 T2 - 8th International Symposium on Ceramics in Medicine CY - Ponte Vedra, FL, USA DA - 1995-11-01 KW - Material, resorbierbar KW - Knochensubstitut KW - Biomaterial PY - 1995 SN - 0-08-042677-8 VL - 8 SP - 453 EP - 456 PB - Elsevier Science CY - Oxford AN - OPUS4-603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Knabe, Christine A1 - Adel-Khattab, Doaa A1 - Rezk, Mohamed A1 - Cheng, Jia A1 - Berger, Georg A1 - Gildenhaar, Renate A1 - Wilbig, Janka A1 - Günster, Jens A1 - Rack, Alexander A1 - Heiland, Max A1 - Knauf, Tom A1 - Stiller, Michael T1 - Osteogenic Effect of a Bioactive Calcium Alkali Phosphate Bone Substitute in Humans N2 - (1) Background: The desire to avoid autograft harvesting in implant dentistry has prompted an ever-increasing quest for bioceramic bone substitutes, which stimulate osteogenesis while resorbing in a timely fashion. Consequently, a highly bioactive silicon containing calcium alkali orthophosphate (Si-CAP) material was created, which previously was shown to induce greater bone cell maturation and bone neo-formation than β-tricalcium phosphate (β-TCP) in vivo as well as in vitro. Our study tested the hypothesis that the enhanced effect on bone cell function in vitro and in sheep in vivo would lead to more copious bone neoformation in patients following sinus floor augmentation (SFA) employing Si-CAP when compared to β-TCP. (2) Methods: The effects of Si-CAP on osteogenesis and Si-CAP resorbability were evaluated in biopsies harvested from 38 patients six months after SFA in comparison to β-TCP employing undecalcified histology, histomorphometry, and immunohistochemical analysis of osteogenic marker expression. (3) Results: Si-CAP as well as β-TCP supported matrix mineralization and bone formation. Apically furthest away from the original bone tissue, Si-CAP induced significantly higher bone formation, bone-bonding (bone-bioceramic contact), and granule resorption than β-TCP. This was in conjunction with a higher expression of osteogenic markers. (4) Conclusions: Si-CAP induced higher and more advanced bone formation and resorbability than β-TCP, while β-TCP’s remarkable osteoconductivity has been widely demonstrated. Hence, Si-CAP constitutes a well-suited bioactive graft choice for SFA in the clinical arena. KW - Silicon release KW - Bioceramics KW - Calcium alkali orthophosphate materials KW - Bioactive bone grafting material KW - Bioactivity KW - Osteogenesis KW - Bone regeneration KW - Sinus floor augmentation PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-591015 DO - https://doi.org/10.3390/bioengineering10121408 VL - 10 IS - 12 SP - 1 EP - 15 PB - MDPI AN - OPUS4-59101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lopez-Heredia, M.A. A1 - Gildenhaar, Renate A1 - Berger, Georg A1 - Linow, Ulf A1 - Wirth, Cynthia A1 - Günster, Jens A1 - Houshmand, A. A1 - Stiller, M. A1 - Knabe-Ducheyne, C. T1 - Effect of stressed and unstressed cell culture environments on the viability of MC3T3 cells with calcium phosphates T2 - ISACB-6 - International symposium on apatite and correlative biomaterials CY - Nantes, France DA - 2013-06-05 KW - Cell culture media KW - Fetal bovine serum KW - Stressed KW - Unstressed KW - Calcium alkaline orthophosphates PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-299387 DO - https://doi.org/10.4172/2090-5025.S1-002 SN - 2090-5017 SN - 2090-5025 N1 - Geburtsname von Wirth, Cynthia: Gomes, C. M. - Birth name of Wirth, Cynthia: Gomes, C. M. SP - 1 EP - 3(?) PB - Ashdin AN - OPUS4-29938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Symietz, Christian A1 - Lehmann, Erhard A1 - Gildenhaar, Renate A1 - Hackbarth, Andreas A1 - Berger, Georg A1 - Krüger, Jörg T1 - Mechanical stability of Ti6Al4V implant material after femtosecond laser irradiation N2 - The surface of a titanium alloy (Ti6Al4V) implant material was covered with a bioactive calcium alkali phosphate ceramic with the aim to accelerate the healing and to form a stronger bond to living bone tissue. To fix the ceramic powder we used a femtosecond laser, which causes a thin surface melting of the metal. It is a requirement to prove that the laser irradiation would not reduce the lifetime of implants. Here we present the results of mechanical stability tests, determined by the rotating bending fatigue strength of sample rods. After describing the sample surfaces and their modifications caused by the laser treatment we give evidence for an unchanged mechanical stability. This applies not only to the ceramic fixation but also to a comparatively strong laser ablation. KW - Aluminium alloys KW - Bending strength KW - Bioceramics KW - Bone KW - Calcium compounds KW - Fatigue KW - Fatigue testing KW - High-speed optical techniques KW - Laser ablation KW - Melting KW - Orthopaedics KW - Prosthetics KW - Rods (structures) KW - Surface treatment KW - Titanium alloys KW - Vanadium alloys PY - 2012 DO - https://doi.org/10.1063/1.4737576 SN - 0021-8979 SN - 1089-7550 VL - 112 IS - 2 SP - 1 EP - 5 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-26200 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Dombrowski, Felix A1 - Simon, Ulla A1 - Börnstein, Julian A1 - Hodoroaba, Vasile-Dan A1 - Feigl, Michael A1 - Grunow, Sabrina A1 - Gildenhaar, Renate A1 - Neumann, Martin T1 - Influence of gelatine coatings on compressive strength of porous hydroxyapatite ceramics N2 - Porous ceramics prepared by the foam replication technique have a high porosity and low mechanical stability. It has been reported that coating such porous ceramics with gelatin allows for an improved compressive strength. Little details regarding the influence of important gelatin parameters such as concentration, temperature and drying conditions as well as bloom number which is a measure of the gel rigidity, on this toughening effect are available. This paper investigates the influence of these parameters on compressive strength of gelatin coated porous hydroxyapatite ceramics. It was found that concentration in the gelatin sols has a marked impact whereas sol temperature, bloom number and differing conditions during subsequent drying have only little influence on the compressive strength of the coated ceramics. KW - Films KW - Composites KW - Strength KW - Apatite KW - Biomedical application PY - 2011 DO - https://doi.org/10.1016/j.jeurceramsoc.2010.11.004 SN - 0955-2219 SN - 1873-619X VL - 31 IS - 4 SP - 523 EP - 529 PB - Elsevier Ltd. CY - Oxford AN - OPUS4-23216 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -