TY - CONF A1 - Reinsch, Stefan T1 - Herstellung von Gläsern mittlerer Wassergehalte T2 - 79. Glastechnische Tagung CY - Würzburg, Germany DA - 2005-05-23 PY - 2005 AN - OPUS4-7805 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Böcker, Wolfgang D. G. A1 - Bücker, Michael A1 - Reinsch, Stefan A1 - Unger, Brita T1 - Abschlussbericht zum Vorhaben Verbundwerkstoff - Mineralisiertes Holz - FKZ: 033 9829 - Förderschwerpunkt "Integrierter Umweltschutz im Bereich der Holzwirtschaft" des Bundesministeriums für Bildung, Wissenschaft, Forschung und Technologie, BMBF - Projektlaufzeit: 1.10.2000-30.9.2003 KW - Mineralisiertes Holz KW - Sol-Gel KW - Holz KW - Vakuumtränkung KW - Holzschutz KW - Biozide PY - 2004 SP - 1 EP - 94 CY - Berlin AN - OPUS4-12055 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan T1 - Development of wood-inorganic composites with enhanced properties and environmental stability T2 - 4th International Wood and Natural Fibre Composites Symposium CY - Kassel, Germany DA - 2002-04-10 PY - 2002 AN - OPUS4-12336 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan T1 - Glastransformationstemperatur wasserhaltiger Gläser T2 - 80. Glastechnische Tagung CY - Dresden, Germany DA - 2006-06-12 PY - 2006 AN - OPUS4-12485 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thiel, A. A1 - Eberstein, Markus A1 - Reinsch, Stefan A1 - Müller, Ralf A1 - Deubener, J. A1 - Schiller, Wolfgang Arno T1 - Viskosität von sinternden Glas/Kristallphasen-Kompositen T2 - 80. Glastechnische Tagung CY - Dresden, Deutschland DA - 2006-06-12 PY - 2006 SN - 3-921089-46-8 SP - 1(?) EP - 3(?) PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-14045 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Malz, Frank A1 - Pauli, Jutta A1 - Jäger, Christian A1 - Reinsch, Stefan A1 - Scholz, G. T1 - Aluminum speciation and thermal evolution of aluminas resulting from modified Yoldas sols N2 - Aluminas resulting from sols prepared via a modified Yoldas procedure were studied with differential thermal analysis (DTA), differential thermal gravimetrie (DTG), 27Al nuclear magnetic resonance (27Al MAS NMR) and X-ray diffraction (XRD) concerning their thermal properties, aluminum speciation and phase content. Hydrolysis of aluminum-sec-butoxide in aluminum nitrate solutions allowed to prepare stable sols with varying NO3-/Al molar ratios, solids contents and pH values. Resulting sols contained different aluminum species including also Al13 polycations. Sol preparation conditions also determined aluminum speciation in solid products obtained after thermal treatments of gels obtained from these sols. Al13 polycations and AlO5 species were found to play an important role for thermally induced transformation from amorphous products via eta-Al2O3 to alpha-Al2O3. Intermediately formed eta-Al2O3 promotes the phase transformation to alpha-Al2O3. KW - Alumina KW - Modified Yoldas sols KW - 27Al nuclear magnetic resonance KW - Differential thermal analysis KW - X-ray diffraction PY - 2007 DO - https://doi.org/10.1016/j.jssc.2007.06.018 SN - 0022-4596 SN - 1095-726X VL - 180 IS - 9 SP - 2409 EP - 2419 PB - Elsevier CY - San Diego, Calif. AN - OPUS4-16189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Unger, Brita A1 - Bücker, Michael A1 - Reinsch, Stefan A1 - Hübert, Thomas T1 - Chemical aspects of wood modification by sol-gel-derived silica N2 - It has been shown that tetraethoxysilane-derived precursors are suitable solutions for impregnating pine sapwood to improve its dimensional stability. Tailored sol–gel syntheses result in precursors with nano-scaled silica species which are able to penetrate into the cell walls of wood. The physical fixation of those species inside the cell walls was verified by ESEM/EDX investigations. There is evidence that the silica species are chemically bonded to wood components. Nonreacted alkoxy groups can exist in the wood composites after impregnation. The amount of these organic residues depends on the composition of the precursors, especially their condensation degree and reactivity. Treatments for finishing the composites after the impregnation step to get clean products and stable properties are discussed in this context. An explanation of the complex relationship between solids content in the impregnation solutions and percentage weight gain and bulking of the composites is given. It can be demonstrated that high WPG values (>20 %) are pre-conditions for an effective protection of the resulting composites but they only guarantee efficient improvements if connected with the incorporation of the inorganic component inside the cell walls. Therefore, the sol–gel syntheses have to be carried out in such a manner that very small (<2 nm) as well as reactive species are sufficiently available. This demands syntheses using sub-stoichiometric water contents (H2O/TEOS <4, better <2). KW - Silica-wood composites KW - Sol-gel derived precursors KW - Curing KW - Fixation of silica KW - Dimensional stability PY - 2013 DO - https://doi.org/10.1007/s00226-012-0486-7 SN - 0043-7719 SN - 1432-5225 VL - 47 IS - 1 SP - 83 EP - 104 PB - Springer CY - Berlin AN - OPUS4-26258 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Müller, Ralf A1 - Reinsch, Stefan ED - Bansal, N. P. ED - Boccaccini, A.R. T1 - Viscous-phase silicate processing KW - Viskoses Sintern KW - Oberflächenkeimbildung KW - Glaspulver KW - Sintermodelle KW - Sinterglaskeramik KW - Glasmatrixkomposit PY - 2012 SN - 978-0-470-55344-2 IS - Chapter 3 SP - 75 EP - 144 PB - Wiley AN - OPUS4-27054 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan T1 - Effects of milling on sinter-crystallization of alkaline earth silicate glass powders T2 - 23rd International Congress on Glass, ICG Prague 2013 CY - Prague, Czech Republic DA - 2013-07-01 PY - 2013 AN - OPUS4-28877 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan T1 - Processing and sinter-crystallization of alkaline earth silicate glass powders T2 - 11th ESG Conference CY - Maastricht, Netherlands DA - 2012-06-03 PY - 2012 AN - OPUS4-27417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böcker, Wolfgang D. G. A1 - Bücker, Michael A1 - Reinsch, Stefan A1 - Unger, Brita A1 - Britz, Roswitha T1 - Mineralisiertes Holz - Verbundwerkstoff mit verbesserten Eigenschaften PY - 2001 CY - München AN - OPUS4-1197 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bücker, Michael A1 - Böcker, Wolfgang D. G. A1 - Reinsch, Stefan A1 - Unger, Brita ED - Wielage, B. ED - Leonhardt, G. T1 - Entwicklung umweltverträglicher Holzverbundwerkstoffe mit verbesserter biologischer und Feuchtebeständigkeit T2 - Tagung "Verbundwerkstoffe und Werkstoffverbunde" CY - Chemnitz, Deutschland DA - 2001-09-05 PY - 2001 SN - 3-527-30319-7 SP - 463 EP - 467 PB - Wiley-VCH CY - Weinheim AN - OPUS4-1160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -