TY - GEN A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Streicher, Doreen A1 - Kohl, C. ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Influence of concret properties on the calibration of radar, ultrasonics and active thermography T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Concrete KW - Radar KW - Ultrasonics KW - Active thermography KW - Velocity calibration PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 15 EP - 24 PB - RILEM Publications AN - OPUS4-18033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf T1 - Zerstörungsfreie Prüfung von Beton und Mauerwerk mit aktiver Thermografie - Einfluss von Oberflächen- und Volumeneigenschaften N2 - Ziel der hier vorgestellten Untersuchungen war es, die Einflüsse von variierenden thermischen Eigenschaften des Baustoffs sowie von unterschiedlichen Emissivitäten der Oberfläche auf die Ortung von Inhomogenitäten in Bauwerksstrukturen mit der aktiven Thermografie zu quantifizieren bzw. durch geeignete Auswerteverfahren zu reduzieren. Vorgestellt werden Ergebnisse von Untersuchungen an Betonprobekörpern mit unterschiedlichen Betonrezepturen und Oberflächenbeschichtungen und -modifikationen sowie an einem historischen Mauerwerksprobekörper mit aufsteigender Feuchte. Die Auswertung der Thermografiesequenzen erfolgte sowohl im Zeit- als auch im Frequenzbereich. KW - Aktive thermografie KW - Beton KW - Mauerwerk KW - Emissivität KW - Oberflächeneigenschaften KW - Thermische Materialeigenschaften PY - 2009 SN - 0025-5300 VL - 51 IS - 9 SP - 587 EP - 592 PB - Hanser CY - München AN - OPUS4-19920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, A. A1 - Neumann, H.-H. A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Bluhm, J. T1 - Praktische Untersuchungen an Kulturgütern und Verkehrsbauten in der Baudenkmalpflege T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - ZfPBau KW - Kulturgüter KW - Fallstudien KW - Radar KW - Aktive Thermografie KW - Endoskopie PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Vortrag 11) SP - 1 EP - 14 CY - Berlin AN - OPUS4-21065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Hasenstab, A. A1 - Arndt, Ralf ED - Michaelsen, H. T1 - Mit Radar und Wärme - Zerstörungsfreie Untersuchung am Spindlerboden im Ovalen Kabinett KW - Parkett KW - Neues Palais KW - Radar KW - Aktive Thermografie PY - 2010 SN - 978-3-86568-462-2 SP - 245 EP - 250 PB - Michael Imhof AN - OPUS4-22356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf ED - Vladimir P. Vavilov, ED - Douglas D. Burleigh, T1 - Square pulse thermography in frequency domain N2 - In this paper a new approach for quantitative non-destructive testing (NDT) of near-surface structures in civil engineering (CE) with active thermography is presented. It adopts the method known as pulsed phase thermography (PPT) for the special requirements of NDT-CE and was developed in a German research project of the Federal Institute for Materials Research and Testing (BAM) in cooperation with the Technical University of Berlin. The new quantitative concept that might be understood as a square pulse thermography in frequency domain or an amplitude-expanded PPT with square pulse heating is based on the thermal diffusivity of the material and the characteristic frequency of the negative maximum phase and amplitude contrast. It aims at complementing the established approaches for defects depth calculation for measurements with long heating and observation times quite usual at active thermography in CE but is easily extendable to other fields of application. After an introduction to the basics of active thermography in CE and the thermography concept of BAM, qualitative results of several case studies will be presented. The main focus of the last section of this contribution is on applications of the new quantitative approach at test specimens of BAM to determine the concrete cover of artificially manufactured defects. KW - Square pulse heating KW - Civil engineering KW - Pulse phase thermography KW - Quantitative method KW - Frequency domain PY - 2008 SN - 978-0-8194-7179-6 DO - https://doi.org/10.1117/12.777697 SN - 0277-786X VL - 6939 IS - CD-ROM SP - 69390X-1 - 69390X-12 AN - OPUS4-17500 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Gaulke, A. ED - Vladimir P. Vavilov, ED - Douglas D. Burleigh, T1 - Thermography investigations and numerical analysis of turbulent and laminar flow at light weight structures N2 - Thermography (IR) allows global visualization of temperature distribution on surfaces with high accuracy. This potential can be used for visualization of fluid mechanics effects at the intersection of laminar and turbulent flows, where temperature jumps appear due to convection and friction i.e. for the optimization in the design of airplane geometries. In civil engineering too it is the aspiration of the modern engineer of light weight structures to meet singular loads like wind peaks rather by intelligent structures and materials than by massive structures. Therefore the "Institute of Conceptual and Structural Design" of the Technical University of Berlin (TUB) is working on the development of adaptive structures, optimized geometry and intelligent microstructures on surfaces of structural elements. The paper shows the potential of modern computational fluid dynamics (CFD) in combination with thermography (IR) to optimize structures by visualization of laminar-tumultuous border layer currents. Therefore CFD simulations and IR wind tunnel experiments will be presented and discussed. For simulations and experiments - artificial and structural elements of the cable-stayed Strelasund Bridge, Germany, are used. KW - Light weight structures KW - Civil engineering KW - Computational fluid dynamics KW - Micro structures KW - Wind tunnel thermography PY - 2008 SN - 978-0-8194-7179-6 DO - https://doi.org/10.1117/12.777709 SN - 0277-786X VL - 6939 IS - CD-ROM SP - 69390M-1 - 69390M-11 AN - OPUS4-17501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf T1 - Square pulse thermography in frequency domain T2 - Thermosense XXX 2008 as part of the SPIE DSS Symposium CY - Orlando, FL, USA DA - 2008-03-18 PY - 2008 AN - OPUS4-17478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf T1 - Thermography investigations and numerical analysis of turbulent and laminar flow at light weight structures T2 - Thermosense XXX 2008 as part of the SPIE DSS Symposium CY - Orlando, FL, USA DA - 2008-03-18 PY - 2008 AN - OPUS4-17479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf T1 - Einfluss von Oberflächen- und Volumeneigenschaften auf die Zerstörungsfreie Prüfung von Beton und Mauerwerk mit aktiver Thermografie T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Aktive Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Mauerwerk KW - Hohlstellen KW - Kiesnester KW - Oberflächeneigenschaften KW - Feuchte PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Mi.4.A.3) SP - 1 EP - 8 AN - OPUS4-18358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Kreutzbruck, Marc ED - Thompson, D. O. ED - Chimenti, D. E. T1 - Influence of surface properties on the detection and quantification of voids in concrete structures using active thermography N2 - Impulse thermography is an active method for quantitative investigations of the near surface region of various structures. It has recently been applied and optimized to applications in civil engineering. For quantitative analysis of data recorded on the building site, the problems are manifold. Here, the influence of the different surface properties on the detection and characterization of voids and honeycombing simulated by polystyrene cubes and cubes prepared of porous concrete are demonstrated. T2 - 35th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Chicago, IL, USA DA - 2008-07-20 KW - Active thermography KW - Pulse phase thermography KW - Surface properties KW - Emissivity KW - Concrete KW - Voids KW - Honeycombing PY - 2009 SN - 978-0-7354-0629-2 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 1096 SP - 1505 EP - 1511 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-19438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Untersuchung von Betonstrukturen mit der Puls-Phasen-Thermografie T2 - Thermografie-Kolloquium 2003 CY - Stuttgart, Deutschland DA - 2003-09-25 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Impuls-Thermografie KW - Puls-Phasen Thermografie KW - Beton KW - Spaltklinker KW - Hohlstellen KW - Ablösungen PY - 2003 UR - http://www.ndt.net/search/docs.php3?date=2006-01&issue=1 SN - 3-931381-51-X N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 86-CD SP - 53 EP - 62 PB - DGZfP CY - Berlin AN - OPUS4-3158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Structural investigation of concrete and masonry structures behind plaster by means of pulse phase thermography T2 - 7th International Conference on Quantitative Infrared Thermography (QIRT 2004) CY - Rhode-St-Genese, Belgien DA - 2004-06-05 KW - Pulse phase thermography KW - Nondestructive testing in civil engineering KW - Plaster KW - Concrete KW - Masonry KW - Delaminations KW - Voids PY - 2004 SP - I.3.1 EP - I.3.6 PB - Karman Institute for Fluid Dynamics CY - Rhode-St-Genese AN - OPUS4-4397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arndt, Ralf A1 - Hillemeier, B. A1 - Maierhofer, Christiane A1 - Rieck, C. A1 - Röllig, Mathias A1 - Scheel, H. A1 - Walther, A. T1 - Zerstörungsfreie Ortung von Fehlstellen und Inhomogenitäten in Bauteilen mit der Impuls-Thermografie KW - Impuls-Thermografie KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung KW - Ortung von Fehlstellen KW - Ablösungen und Verpressfehler PY - 2004 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 81 IS - 10 SP - 786 EP - 793 PB - Ernst CY - Berlin AN - OPUS4-4572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf T1 - Ortung von Putzablösungen auf Beton und Mauerwerk mit der Puls-Phasen-Thermografie T2 - DACH-Jahrestagung 2004: ZfP in Forschung, Entwicklung und Anwendung CY - Salzburg, Austria DA - 2004-05-17 PY - 2004 AN - OPUS4-4016 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf T1 - Structural investigation of concrete and masonry structures behind plaster by means of pulse phase thermography T2 - The 7th International Conference on Quantitative Infrared Thermography (QIRT) 2004, Karman Institute CY - Sint-Genesius-Rode, Belgium DA - 2004-07-05 PY - 2004 AN - OPUS4-4020 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Ortung von Putzablösungen auf Beton und Mauerwerk mit der Puls-Phasen-Thermografie N2 - Abstract In the recent years the application of infrared thermography and especially its active approaches lock-in thermography, impulse themography and pulse phase thermography (PPT) has gained more importance for non-destructive testing (NDT). In this paper it is demonstrated that PPT is very well suited for NDT in civil engineering. The method is based on pulse heating of the investigated specimen and on the observation of the cooling down process on its surface with an infrared camera. The transient behaviour is afterwards analysed with Fast Fourier Transformation, enabling the creation of phase and amplitude images with enhanced visualisation of the defects. Results of European and National (i.e. DFG) funded projects are presented, for example the detection of voids and inhomogeneities close to the surface and the localisation of delaminations on plastered concrete and masonry specimen. ZUSAMMENFASSUNG Im Rahmen eines von der Deutschen Forschungsgemeinschaft geförderten Vorhabens zur zerstörungsfreien Prüfung im Bauwesen wird in der Bundesanstalt für Materialforschung und -prüfung (BAM) in Zusammenarbeit mit der Technischen Universität Berlin (TUB) die Puls-Phasen-Thermografie (PPT) weiterentwickelt, bewertet und eingesetzt. Die durch die Impuls-Thermografie (IT) aufgenommenen Daten werden mittels Fast Fourier Transformation (FFT) bearbeitet. Die durch die FFT gewonnenen Phasenbilder reduzieren die Störeinflüsse von Oberflächeninhomogenitäten und ungleichmäßiger Erwärmung. Die dargestellten Ergebnisse zeigen deutlich, dass sich die PPT sehr gut zur zerstörungsfreien Prüfung im Bauwesen eignet. Insbesondere Inhomogenitäten im oberflächennahen Bereich, wie Ablösungen und Hohlstellen hinter Beschichtungen (Putz, CFK-Laminate etc.), aber auch Defekte in größeren Tiefen können zuverlässig geortet und bildgebend dargestellt werden. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Putz auf Beton und Mauerwerk KW - Ortung von Fehlstellen und Ablösungen PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v89/v89.htm SN - 3-931381-55-2 SP - 1(?) EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-5285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weritz, Friederike A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert T1 - Investigation of concrete structures with pulse phase thermography N2 - The applicability of pulse phase thermography (PPT) for the investigation of structures is studied systematically on concrete test specimens and on a plastered sandstone column. In the test specimens, voids and delaminations are implemented in different depths and with different sizes, modelling real voids, honeycombing and debonding. Delaminations of plaster in concrete and masonry and behind tiles on concrete are investigated. PPT is based on the frequency analysis of the cooling down process of actively heated surfaces. Therefore, it is contactless and thus completely non-destructive (if overheating of the surface is prevented), fast and allows the inspection of large surface areas. The interpretation of amplitude and phase images gives semi-quantitative information about the observed defects. The phase images provide a deeper probing up to 10–15 cm in relation to the interpretation of the thermograms and to the amplitude images. In addition, the influence of surface inhomogeneities and non-uniform heating is reduced. KW - Pulse phase thermography KW - Impulse thermography KW - Concrete KW - Voids KW - Honeycombing PY - 2005 DO - https://doi.org/10.1007/BF02481657 SN - 1359-5997 SN - 1871-6873 VL - 38 IS - 9 SP - 843 EP - 849 PB - Springer CY - Dordrecht AN - OPUS4-12300 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Rieck, C. A1 - Walther, A. A1 - Scheel, H. A1 - Hillemeier, B. T1 - Application of impulse-thermography for non-destructive assessment of concrete structures N2 - Impulse-thermography is an active method for quantitative investigations of the near surface region of various structures. It has recently been applied and optimised to applications in civil engineering. By using either an internal or external heat source, parts of the structure under investigation are heated up and the transient heat flux is observed by recording the temperature change at the surface as a function of time. This method is very well suited for the detection of voids and honeycombing in concrete, up to concrete covers of 10 cm as well as for the location of delaminations in multi-layered systems (e.g. plaster on concrete, CFRP-laminates on concrete, asphalt on concrete). Also safety relevant defects like voids in tendon ducts and cracks in concrete could be recognised. KW - Non-destructive testing KW - Impulse-thermography KW - Concrete KW - CFRP-laminates KW - Delamination KW - Tendon duct KW - Voids KW - Compaction faults PY - 2006 DO - https://doi.org/10.1016/j.cemconcomp.2006.02.011 SN - 0958-9465 SN - 1873-393X VL - 28 IS - 4 SP - 393 EP - 401 PB - Elsevier CY - Barking, Essex AN - OPUS4-12359 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf T1 - Quantitative pulse-phase-thermography for composites and concrete structures T2 - Structural Faults & Repair 2006 CY - Edinburgh, Scotland DA - 2006-06-13 PY - 2006 AN - OPUS4-12441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf T1 - Impuls-Thermografie und Puls-Phasen-Thermografie zur Qualitätssicherung von Beschichtungen T2 - Workshop zur Anwendung der Impuls-Thermografie im Bauwesen CY - Berlin, Germany DA - 2005-04-21 PY - 2005 AN - OPUS4-11288 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Hillemeier, B. A1 - Rieck, C. A1 - Scheel, H. A1 - Walther, A. T1 - Struktur- und Feuchteuntersuchungen von Bauteil- und Bauwerksoberflächen mit der Impuls-Thermografie T2 - Thermografie-Kolloquium der DGZfP CY - Stuttgart, Deutschland DA - 2005-09-22 KW - Impulse-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Mauerwerk PY - 2005 SN - 3-931381-68-4 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 98-CD SP - 1(?) EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-11491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -