TY - CONF A1 - Plarre, Rüdiger ED - Trematerra, P. ED - Conti, B. T1 - Uninvited and welcomed guests in museums – biological management of clothes moths and woodworms N2 - In museums and historic houses clothes, moths (Tineola bisselliella, Tinea pellionella) and the furniture beetle (Anobium punctatum) are the most economically important pests on textiles or wooden artifacts, respectively. Their management is essential to protect cultural ethnological heritage and natural history collections for future generations. Pest management strategies have changed over time. Today, intensive knowledge on pest biology and overall material science are key cornerstones in IPM concepts - also for the Museum environment. The important first steps for sustainable pest management are risk assessment, early pest detection and identification of pathways of infestation. These steps are followed by physical and biological means of control, which have lately gained more importance than applying biocides. Several potentially effective biological enemies of clothes moths and woodworm have been known for a long time, but their promotion for pest control in Museums and historic houses is just beginning. This short review summarizes current concepts of pest life cycle interruption by applying good quarantine and very specific biological measures. The lessons learned from recent faunistic surveys, life-history studies as well as behavioral observations of parasitoids and predators of clothes moths and woodworm may supplement the pest management tool box. The need for further research in this field is addressed. T2 - Working Group Meeting "Integrated Protection of Stored Products" CY - Pisa, Italy DA - 03.09.2019 KW - Corynetes caeruleus KW - Biological control KW - Museum pests KW - Tineola bisselliella KW - Anobium punctatum KW - Apanteles carpatus KW - Baryscapus tineivorus PY - 2020 SN - 978-92-9067-333-0 VL - 148 SP - 266 EP - 273 AN - OPUS4-50543 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Palanti, S. A1 - Cragg, S. A1 - Plarre, Rüdiger T1 - Resistance against marine borers: About the revision of EN 275 and the attempt for a new laboratory standard for Limnoria N2 - Wood protection technology in the marine environment has changed over the last decades and will continue to do so. New active ingredients, newer formulations, and novel wood-based materials including physically- and chemically-modified wood, together with increasing concerns over environmental impacts of wood preservatives, urgently demand a major revision of EN 275 “Wood preservatives – Determination of the Protective Effectiveness against Marine Borers”, dated from 1992. This IRG document reports on the technical work in CEN TC 38 regarding the revision of this standard. A Task Group within WG 24 of CEN TC 38 was formed consisting of experts from different field of competence (e.g. wood preservatives industry, wood scientists, marine biologists, archaeologists and cultural heritage conservators). Starting by e-mail correspondence in 2014, and continuing with four physical meetings (Berlin 2x, Florence, Venice) with experts from Germany, Italy, Sweden, and UK were held so far. Significant items for revision in EN 275 were identified as: number of replicates, duration of the test, dimension of specimens, number of test sites, number of reference species, reference material including reference preservative, re-immersion of specimens after non-destructive periodical evaluation for longer periods of time vs higher number of replicates for successive destructive examinations without re-immersion, utilization of X- ray apparatus and specific software to ease evaluation, etc. Furthermore, the task group is working on a standardized lab test for time-saving evaluation of different wood qualities for their potential to resist attack by limnorids. The suitability of this lab test will be determined by round robin tests as soon as safe face-to-face collaboration permits. The outcome will be published as a CEN TR (Technical Report) document, with a view to eventual adoption within the revised standard. T2 - THE INTERNATIONAL RESEARCH GROUP ON WOOD PROTECTION CY - Online meeting DA - 10.06.2020 KW - Standardization KW - Marine borers KW - Bankia sp KW - Teredo sp KW - Limnoria spp KW - Durability PY - 2020 VL - 2020 SP - IRG/WP 20-20669-1 EP - IRG/WP 20-20669-11 CY - Stockholm AN - OPUS4-52064 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Laar, C. A1 - Baar, C. A1 - Plarre, Rüdiger A1 - McMahon, Dino Peter T1 - Genetic relationships of local infestations by Anobium punctatum, Xestobium rufovillosum and their associated predator Korynetes caeruleus from buildings in North-Eastern Germany N2 - Wood-destroying pests such as Anobium punctatum and Xestobium rufovillosum cause damage to art and cultural objects as well as to buildings. Monitoring population dynamics of pest species as well as of their naturally occurring counterparts are an essential part in the development of biological control measures as alternatives to conventional wood protection. Therefore, both the dispersal and homogeneity of pest and beneficial insect populations across multiple sites and buildings were investigated in the present study using DNA barcoding. Specifically, beetles of Anobium punctatum (de Geer 1774) (Coleoptera, Ptinidae), Xestobium rufovillosum (de Geer, 1974) (Coloeptera, Ptinidae), and Korynetes caeruleus (de Geer 1775) (Coleoptera, Cleridae) were collected from buildings at four different sites in Mecklenburg-Western Pomerania, North-Eastern Germany. DNA analysis was performed using mitochondrial cytochrome c oxidase subunit I (COI). For A. punctatum, low base pair variability was found in the gene segment studied (4-5 SNPs) within one building (Greven) and between four spatially separated sites. Conversely, in X. rufovillosum, the sequences from two sites studied were homogeneous within a site but differed between locations by nine base pair positions (SNPs). The main result of this study is that the pests A. punctatum and X. rufovillosum showed a higher variability in the investigated gene segment than the natural counterpart K. caeruleus. T2 - IRG52 Webinar on Wood Protection CY - Online meeting DA - 01.11.21 KW - Anobium punctatum KW - Xestobium rufovillosum KW - Korynetes caeruleus KW - DNA barcode PY - 2021 SN - 2000-8953 VL - 21 SP - 1 EP - 11 PB - The International Research Group on Wood Protection CY - Stockholm, Sweden AN - OPUS4-54197 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger A1 - Busweiler, Sabine A1 - Haustein, V. A1 - von Laar, C. A1 - Haustein, T. ED - Bueno-Mari, R. ED - Montalvo, T. ED - Robinson, W. H. T1 - Korynetes caeruleus (coleoptera: cleridae) for biological control of anobium punctatum (coleoptera, ptinidae) N2 - Larvae and adults of Korynetes caeruleus (de Geer 1775) (Coleoptera: Cleridae) were collected from old churches and reared in the laboratory on Anobium punctatum (de Geer 1774) (Coleoptera, Ptinidea, formerly Anobiidae). Breeding success of K. caeruleus was low, but basic parameters of this species’ developmental cycle were identified. At 21 °C and 75 % relative humidity and a four-month cold period at 4 °C, the development of K. caeruleus from egg to adult appearance lasted 2 years. The pupal stage may be reached and completed after one and a half years. Feeding on larvae of A. punctatum by larvae of K. caeruleus was observed and consisted of a combination of sucking haemolymph and consuming body parts. The sickle-like mandibles of larvae of K. caeruleus penetrate the cuticle of prey larvae followed by pumping and sucking body movements. Adult beetles of A. punctatum were not attacked by K. caeruleus larvae. Feeding behavior of adult K. caeruleus was not investigated. T2 - 10th International Conference on Urban Pests CY - Barcelona, Spain DA - 26.06.2022 KW - Cultural heritage KW - Biological pest control KW - Life history data KW - Wood protection PY - 2022 SN - 978-84-09-41424-6 SP - 34 EP - 44 AN - OPUS4-55170 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger A1 - Cabral, U. A1 - Querner, P. ED - Ryder, S. ED - Crossman, A. T1 - Screening of two plant-derived extracts from Sri Lanka for their potential to control the subterranean termite Coptotermes formosanus N2 - The tropical environment of Sri Lanka accelerates bio-deterioration of cultural objects. Termites are one of the most damaging insect pests destroying the cellulose components of historical artifacts. Herbal extracts obtained from resin of Vateria copallifera (Retzius) Alston and seeds of Madhuca longifolia (Konig) Macbride have been used for centuries to preserve e.g. palm leaf manuscripts from insect attack. Herbal extractions of these traditional products for palm leaf manuscript were tested for their effect against the termite species Coptotermes formosanus Shiraki, 1909. Natural and artificial aged herbal extractions were tested to obtain a repellent index. Resin oil of V. copallifera caused slightly higher repellencies than M. longifolia. Artificially aged samples produced lower repellencies than naturally aged samples. The results indicate that the active ingredients are volatile. The potential for barrier treatment was tested only with V. copallifera. Tunnelling-behavior of C. formosanus workers through sand in the presence of V. copallifera resin oil was largely reduced. T2 - Pest Odyssey The Next Generation CY - Online meeting DA - 20.09.2021 KW - IPM in museums KW - Termite control KW - Essential oils KW - Library pests PY - 2022 SN - 978-1-909492-83-7 SP - 56 EP - 62 PB - Archetyp Publication LTD CY - London AN - OPUS4-54736 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger A1 - Busweiler, Sabine A1 - Haustein, V. A1 - von Laar, C. A1 - Haustein, T. T1 - Eignung von Korynetes caeruleus (Coleoptera: Cleridae) zur biologischen Bekämpfung von Anobium punctatum (Coleoptera, Ptinidae) N2 - Larven und adulte Käfer von Korynetes caeruleus (DE GEER 1775) (Coleoptera: Cleridae) wurden in alten Kirchen gesammelt und im Labor auf Kulturen von Anobium punctatum (DE GEER 1774) (Coleoptera, Ptinidae, früher Anobiidae) aufgezogen. Der Bruterfolg von K. caeruleus war gering, aber es wurden grundlegende Parameter des Entwicklungszyklus dieser Art ermittelt. Bei 21 °C und 75 % relativer Luftfeuchtigkeit und einer viermonatigen Kälteperiode bei 4 °C dauerte die Entwicklung von K. caeruleus vom Ei bis zum erwachsenen Tier 2 Jahre. Das Puppenstadium kann nach eineinhalb Jahren erreicht und abgeschlossen werden. Die Larven von K. caeruleus ernährten sich von den Larven von A. punctatum. Die Nahrungsaufnahme ist eine Kombination aus Saugen von Hämolymphe und Verzehr von Körperteilen. Die sichelartigen Mandibeln der Larven von K. caeruleus durchdringen die Cuticula der Beutetierlarven, gefolgt von pumpenden und saugenden Körperbewegungen. Erwachsene Käfer von A. punctatum wurden von K. caeruleus-Larven nicht angegriffen. Das Fressverhalten von erwachsenen K. caeruleus wurde nicht untersucht. T2 - EIPOS Sachverständigentage CY - Dresden, Germany DA - 29.06.2023 KW - Anobium punctatum KW - Biologische Schädlingsbekämpfung KW - Holzschutz KW - Kulturguterhaltung KW - Korynetes caeruleus PY - 2023 SN - 976-3-7388-0827-8 SP - 99 EP - 115 PB - Faunhofer IRB Verlag CY - Stuttgart AN - OPUS4-57891 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baar, C A1 - Laar von, C A1 - Plarre, Rüdiger A1 - McMahon, Dino Peter T1 - Insektenmonitoring und genetisches Barcoding N2 - Die aus der Kirche in Greven entnommenen A. punctatum wiesen größere genetische Unterschiede auf als die aus der isolierten Zucht der BAM. Dies lässt vermuten, dass ein Austausch von zufliegenden oder eingeschleppten Individuen zu einer erhöhten genetischen Variabilität beiträgt. Die Ergebnisse der Sequenzanalysen vom Standort Greven zeigten, dass vier Variationen vorhanden waren. Die DNA-Barcodes aus der Datenbank NCBI (Frankreich, Finnland und Deutschland) besaßen nur SNPs, die bereits aus den Insekten der Kirche in Greven bekannt waren. Nach aktueller Datenlage für den betrachteten Genabschnitt sind diese Varianten (V2 bis V22) als repräsentativ für den mitteleuropäischen Raum anzunehmen. Potenzielle weitere Varianten lassen sich nur über eine größere Stichprobenanzahl entdecken/finden. Die Ergebnisse der Käferproben aus der isolierten Zucht der BAM sind deutlich homogener und entsprachen der Variante 1 aus Greven. Die Variante 1 wurde ebenfalls in vier französischen und einer deutschen Probe aus der NCBI-Datenbank nachgewiesen. Die Ergebnisse deuten auf zwei Hauptvariationen (Vx und V20) hin, wobei die eine (VJ homogener als die andere (V20) zu sein scheint. Da für den Räuber K. caeruleus keine Unterschiede in der COI gefunden wurden, gilt zu prüfen, ob der gewählte Genabschnitt für die Untersuchung repräsentativ ist. Dies ist mit einer höheren Probenzahl zu validieren. T2 - 32. Deutsche Holzschutztagung CY - Dresden, Germany DA - 25.04.2024 KW - Korynaetes caeruleus KW - Insektenmonitoring KW - Genetisches Barcoding KW - Anobium punctatum PY - 2024 SP - 244 EP - 252 AN - OPUS4-60027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger T1 - Termiten - Biologie, Vorkommen und Bekämpfung N2 - Der globale Handel mit Holz, als Rohware, Verpackungsholz, Mobiliar oder Kulturgut haben dazu beigetragen, dass einige Termitenarten eine weltweite Verbreitung erfahren haben. Ob sich eine Art in einem neuen Habitat erfolgreich etabliert, hängt dabei von vielen Faktoren ab. Für Termiten ist die Temperatur ein entscheidender Faktor. In Deutschland ist die Gefahr, dass Termiten ein regelmäßiger Bestandteil der Fauna werden, in naher Zukunft und trotz Klimawandels nicht zu erwarten. Es sind nicht die Jahresmitteltemperaturen, sondern die für Termiten extremen Minusgrade mit Bodenfrost im Winter – und sei es nur über ein paar Tage –, die ihr nachhaltiges Vorkommen verhindern. Nur unter bestimmten synanthropen Bedingungen treten Termiten gelegentlich in Deutschland in Erscheinung, wie die wenigen Beispiele zeigen T2 - 28. Weiterbildungstag des Deutschen Holzschutzfachverbandes Berlin Brandenburg CY - Berlin, Germany DA - 02.12.2017 KW - Klimawandel KW - Holzschutz KW - Materialschutz PY - 2017 SP - 1 AN - OPUS4-43257 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger ED - Müller, G. ED - Pospischil, R. ED - Robinson, W.H. T1 - Likelihood of infestations by Tineola Bisselliella (Lepidoptera: Tineidae) from natural reservoirs N2 - The webbing clothes moth Tineola bisselliella is economically the most import pest on wool, für, and feathers. The larvae cause damage in Stores, museums and households. Infestation can be through import of infested material or by new infestations out of natural reservoirs. Natural reservoirs are believed to be bird, rodent or insect nests. Rearing experiments with collected different nesting materials have shown that T. bisselliella is capable to breed in animal nests as well as on stored seeds. Outdoor trapping with pheromones for catching males or with attractive food for the larvae to catch females indicate that the presence of T. bisselliella outside buildings is very limited. Although the webbing clothes moth has the potential to survive in non-synanthropic environments, it does not frequently occur there. Intra-guild competition with other tineid moths prevents T. bisselliella from establishing sustainable outdoor population. New infestations from the field are unlikely and preventive control must focus on quarantine to avoid the pest’s introduction via contaminated material. Key words clothes moth, Invasion, animal nests, quarantine, out-door trapping. T2 - 8th ICUP 2014 - International conference on urban pests CY - Zurich, Switzerland DA - 20.07.2014 KW - Kleidermotte KW - Schädlingsbefall KW - Nester KW - Quarantäne KW - Freilandfallen PY - 2014 SN - 978-615-5270-10-9 SP - 345 EP - 352 PB - OOK-Press Kft. AN - OPUS4-31157 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertel, Horst A1 - Plarre, Rüdiger T1 - Incorporating insect behaviour in standard tests of wood preservatives - a possible way to reduce pesticide loadings T2 - 31th Annual Meeting of the International Research Group on Wood Preservation CY - Kona, HI, USA DA - 2000-05-14 KW - Standard test methods KW - Behavior KW - Wood preservatives KW - Hylotrupes bajulus PY - 2000 SP - Paper 20190, 1 EP - 10 PB - International Research Group on Wood Preservation CY - Stockholm AN - OPUS4-11822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger ED - Robinson, W.H. ED - De Carvalho Campos, A.E. T1 - Wood protection by interfering with insect behavior: adequacy of laboratory test designs N2 - Standardized test methods by which the efficacies of conventional Chemical wood preservatives against insects determine their toxic effects against larvae of wood boring beetles or their feeding prevention by termites. Although alternative control strategies to the application of biocides exist, such as interference with insect behavior during mating or when searching for suitable breeding and feeding sites, their acceptance, too, depends on efficacy evaluation. This is why new test set ups are needed which take behavior modifying control strategies into account. This paper will demonstrate how new laboratory tests must be designed or how existing Standards can be altered to reliably interpret insect behavior including its successful manipulation in a standardized format. T2 - 7th ICUP - International conference on urban pests CY - Ouro Preto, Brazil DA - 07.08.2011 KW - Standardized tests KW - IPM KW - Efficacy evaluation KW - Wood borers KW - Termites PY - 2011 SP - 23 EP - 26 PB - Instituto Biológico CY - Sao Paulo, Brazil AN - OPUS4-24295 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger A1 - Steinbach, S. A1 - Roland, U. A1 - Trommler, U. A1 - Hoyer, C. T1 - Thermische Bekämpfungsverfahren im Holzschutz mit elektromagnetischen Wellen N2 - Bekämpfungsverfahren gegen Organismen, die in Deutschland Bauholz wirtschaftlich bedeutend schädigen können, sind in der DIN 68800 Teil 4: 02/2012 „Holzschutz - Bekämpfungs- und Sanierungsmaßnahmen gegen Holz zerstörende Pilze und Insekten“ regeltechnisch zusammengefasst und gewichtet. Dabei wird je nach Verfahren und Schadorganismus zwischen Regelsanierung und Sondermaßnahmen unterschieden. So wird z. B. bei den thermischen Maßnahmen im Sinne der Norm das sogenannte Heißluftverfahren gegen Insekten als Regelsanierung bezeichnet, wogegen es gegen Pilze nicht als solche ausgewiesen ist. Gleiches gilt für elektrophysikalische Verfahren sowohl gegen Pilze als auch gegen Insekten. Dies begründet sich dadurch, dass bei Erstellung der Norm Zweifel bezüglich weitgehender Allgemeingültigkeit und Praxisbewährtheit elektrophysikalischer Verfahren, wie sie zur Erwärmung des befallenen Holzes eingesetzt werden, bestanden. Somit erklärt sich auch, dass die Rahmenbedingungen einer erfolgreichen Bekämpfung mittels z. B. Mikrowellen denen des Heißluftverfahrens gleichgesetzt wurden, nämlich die vollständige Erwärmung des befallenen Holzbauteils auf eine Mindesttemperatur von 55° C für eine Dauer von mindestens 60 min. Die physikalisch-chemischen Vorteile der zeitgleichen Wärmegeneration im gesamten Holzkörper durch elektromagnetische Felder im Vergleich zum sukzessiven Wärmeeintrag durch Konduktion fanden keine Berücksichtigung. T2 - 22. Tagung des Sächsischen Holzschutzverbandes - Modernes Bauen mit Holz CY - Dresden, Germany DA - 16.03.2013 KW - Holzschutz KW - Mikrowellentechnik KW - Radiowellentechnik KW - Normung PY - 2013 SN - 978-3-8167-9132-4 SN - 978-3-8167-9133-1 SP - 107 EP - 115 PB - Fraunhofer IRB Verl. AN - OPUS4-29721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Roland, U. A1 - Trommler, U. A1 - Hoyer, C. A1 - Pfütze, C. A1 - Plarre, Rüdiger A1 - Rabe, C. A1 - Höhlig, B. A1 - Holzer, F. A1 - Kraus, M. A1 - Schmidt, D. A1 - Kopinke, F.-D. T1 - Radio-frequency heating for pest control, decontamination and drying of timber and masonry N2 - A number of very relevant processes for protection and reconstruction of buildings can be supported by controlled heating: elimination of pests without using hazardous Chemicals, drying and decontamination of timber and many other building materials. For this purpose, radio-frequency (RF) dielectric heating is an advantageous Option because the materials and structures can be heated directly by energy absorption in the volume, homogeneously and, if required, relatively fast. Compared to microwaves, the penetration depths are usually much larger and the flexibility with respect to different materials is wider. Namely, heating can also be realized for dry materials because the dielectric loss is as not closely related to the presence of water as for microwave applications. T2 - 14th International conference on microwave and high frequency heating CY - Nottingham, UK DA - 16.09.2013 KW - Radio-frequency heating KW - Drying KW - Decontamination KW - Pest control KW - Timber KW - Masonry PY - 2013 SN - 978-0-85358-293-9 SP - 112 EP - 115 AN - OPUS4-29269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina A1 - Kutnik, M. A1 - Conti, E. A1 - Klamer, M. A1 - Nunes, L. A1 - van Acker, J. A1 - Plarre, Rüdiger T1 - Guidance on the European Biocidal Products Regulation concerning Efficacy of Wood Preservatives N2 - In Europe wood preservatives belong to Product Type 8 (PT8) of the Biocidal Products Regulation (BPR, EU n. 528/2012), which regulates the authorisation of biocidal active substances and products in the European market. The applicant, who aims to obtain authorization to place a product onto the European market, needs to submit data to substantiate the label claims for the intended uses. Label claims are a central issue in the assessment of efficacy. The aim of this paper is to raise awareness of the recently issued “Guidance on the Biocidal Products Regulation” concerning the evaluation of efficacy of wood preservatives. This guidance document is addressed to the applicants as well as to the competent authorities of the member states of Europe in charge of assessing efficacy data, and has been in the public domain, in its latest version, since February 2017. The CEN/Technical Committee 38 “Durability of wood and wood based products” / WG 22 "Performance, assessment and specification” decided to bring the Guidance to a wider audience with the aim of disseminating the information and to trigger discussion among the experts of IRGWP. An excerpt of the Guidance that is relevant to wood preservative products is presented in an Annex to this paper. Keywords: Biocidal Products Regulation, BPR, authorisation, Guidance, PT8, curative wood preservatives, preventive wood preservatives. T2 - IRG48 Scientific Conference on Wood Protection CY - Universität Ghent, Belgium DA - 04.06. 2017 KW - Preventive wood preservatives KW - Biocidal Products Regulation KW - BPR KW - Authorisation KW - Guidance KW - PT8 KW - Curative wood preservatives PY - 2017 SN - 2000-8953 SP - IRG/WP 17-20627-1 EP - 17 AN - OPUS4-40576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Landsberger, B. A1 - Frauendorf, H. A1 - Adler, C. A1 - Plarre, Rüdiger ED - Nilsen, L. ED - Rossipal, M. T1 - Capability and Limitations of Anoxic Treatments for Protecting Museum Collections N2 - Without precaution, insects may cause serious damage to museum collections. Quarantine of potentially infested objects can be logistically challenging. Anoxia under controlled Nitrogen atmosphere is a most gentle but also time-consuming method to eradicate insect pests in all kinds of different materials. Treatment results are usually affected by duration, temperature, humidity and residual oxygen content. During a two-year research project, 34 relevant pest insect species of all developmental stages were tested in different materials (wood, paper, wool) to monitor treatment success and to determine optimum treatment parameters. Duration of treatment ranged from one to three weeks at temperatures of 20–27 °C. As expected, results showed significant differences in mortality among tested species. Highest tolerance of hypoxic conditions was found in elder larvae of Hylotrupes bajulus. Although this species is an unlikely museum pest, it may serve as an overall most tolerant reference. Anobiids and other wood boring beetles are more often an issue related to cultural heritage. A combination of three weeks exposure time at maximum 0.5% residual oxygen and 24 °C, alternatively 1% residual oxygen and 27 °C are recommended for infested artefacts. Imbedding materials in general had no influence on mortality. This study was funded by Deutsche Bundesstiftung Umwelt (DBU). T2 - 4th International Conference Integrated Pest Management (IPM) for Cultural Heritage CY - Stockholm, Sweden DA - 21.05.2019 KW - Controlled atmosphere KW - Museum insect pest KW - Anoxia KW - Nitrogen PY - 2019 SN - 978-91-7209-845-9 SP - 202 EP - 210 AN - OPUS4-50349 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Plarre, Rüdiger ED - Militz, H. T1 - Reaktion von Hausbockkäfern auf Bauholz unterschiedlicher Qualitäten im Labor und Freiland N2 - In Labor- und Feldversuchen wurde das Verhalten von männlichen und weiblichen Hausbockkäfern bei der Holzsuche beobachtet. Die ermittelten Ergebnisse zusammen mit bereits publizierten Daten erlauben es, einen Regelkreis der Paarungsbiologie einschließlich der Substratwahl (Neubefall) aufzustellen. Den Männchen kommt dabei eine wesentliche Rolle bei der Holzauswahl zu. Die Attraktivität von Nadelholz ist dabei von der Holzart aber auch von dessen Vorbehandlung wie Trocknungsprozessen abhängig. Eine herbeigeführte grundsätzliche Immunität durch reduzierte Attraktivität konnte bei keiner der getesteten Nadelholzarten bzw. -qualitäten festgestellt werden. T2 - Deutsche Holzschutztagung 2012 - Trends und Chancen CY - Göttingen, Germany DA - 27.09.2012 KW - Holzschutz KW - Verhalten KW - Regelsetzung PY - 2012 SN - 978-3-95404-185-5 SP - 36 EP - 45 PB - Cuvillier AN - OPUS4-26687 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geburtig, Anja A1 - Gorbushina, Anna A1 - Plarre, Rüdiger A1 - Stephan, Ina T1 - Umweltsimulation an der BAM – Grundlegende Ansätze mit Beispielen aus der natürlichen Umwelt N2 - Drei grundlegend verschiedene Ansätze für Umweltsimulation werden an Beispielen illustriert: (i) Ganzheitlicher Ansatz - Nachstellen von Umweltmilieus im Labor Ziel ist hier das Nachstellen von (kombinierten) Umweltbedingungen im Labor; die Umweltparameter werden mit all ihren Wechselwirkungen aufgebracht. Hauptnutzen ist eine gegenüber der natürlichen Beanspruchung erhöhte Reproduzierbarkeit der Umweltbedingungen. Hat man sein Laborsetup entwickelt, ist es auf verschiedene Materialien anwendbar. Unter solchen Laborbedingungen ermittelte Lebensdauern sind dabei nicht auf die typischerweise sehr variablen Real-Umweltbedingungen übertragbar. (ii) Parametrisierter Ansatz - Ermittlung einzelner Materialempfindlichkeiten Hierbei werden im Labor die Wirkungen separater Umweltparameter auf Materialien nachgestellt. Für eine solche Separation der Einflussfaktoren ist insbesondere die Aufschlüsselung möglicher Wechselwirkungen der Umwelt-parameter (z.B. Mikroklima an bestrahlten Oberflächen) erforderlich. Einzelne (meist Alterungs-) Empfindlichkeiten können qualitativ nachgewiesen werden oder sogar – als Beanspruchungs-Wirkungs-Funktionen – quantifiziert werden, was einen wesentlichen Schritt in Richtung der Digitalisierung der Material¬prüfung darstellt. Insbesondere ist dann auch eine Lebensdauer-vorhersage für vorgegebene Zeitreihen der Beanspruchungs¬parameter umsetzbar. (iii) Rückwirkungen auf die Umwelt Umweltbeanspruchungen können zur Freisetzung von Schadstoffen in die Umwelt führen. Durch die Nachstellung kritischer, aber realitätsnaher Einsatzszenarien kann die Menge an freigesetzten Substanzen abgeschätzt werden. Egal, welcher Ansatz verfolgt wird – ein Vergleich mit der oder einer Real-beanspruchung ist unerlässlich, ebenso wie die Messdatenaufzeichnung (data logging) aller potenziell relevanten Beanspruchungsparameter während dieser Realbeanspruchung. Obwohl die naturnahe Umwelt – sowohl in der BAM als auch bei der GUS – gegenüber der technischen Umwelt eher untergeordnet auftritt, werden zur Illustration Beispiele aus der naturnahen Umwelt verwendet. T2 - 50. Jahrestagung der GUS CY - Online meeting DA - 23.03.2022 KW - Umweltsimulation PY - 2022 SN - 978-3-9818507-7-2 SP - 79 EP - 89 AN - OPUS4-55015 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -