TY - GEN A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Streicher, Doreen A1 - Kohl, C. ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Influence of concret properties on the calibration of radar, ultrasonics and active thermography T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Concrete KW - Radar KW - Ultrasonics KW - Active thermography KW - Velocity calibration PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 15 EP - 24 PB - RILEM Publications AN - OPUS4-18033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf T1 - Zerstörungsfreie Prüfung von Beton und Mauerwerk mit aktiver Thermografie - Einfluss von Oberflächen- und Volumeneigenschaften N2 - Ziel der hier vorgestellten Untersuchungen war es, die Einflüsse von variierenden thermischen Eigenschaften des Baustoffs sowie von unterschiedlichen Emissivitäten der Oberfläche auf die Ortung von Inhomogenitäten in Bauwerksstrukturen mit der aktiven Thermografie zu quantifizieren bzw. durch geeignete Auswerteverfahren zu reduzieren. Vorgestellt werden Ergebnisse von Untersuchungen an Betonprobekörpern mit unterschiedlichen Betonrezepturen und Oberflächenbeschichtungen und -modifikationen sowie an einem historischen Mauerwerksprobekörper mit aufsteigender Feuchte. Die Auswertung der Thermografiesequenzen erfolgte sowohl im Zeit- als auch im Frequenzbereich. KW - Aktive thermografie KW - Beton KW - Mauerwerk KW - Emissivität KW - Oberflächeneigenschaften KW - Thermische Materialeigenschaften PY - 2009 SN - 0025-5300 VL - 51 IS - 9 SP - 587 EP - 592 PB - Hanser CY - München AN - OPUS4-19920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf T1 - Einfluss von Oberflächen- und Volumeneigenschaften auf die Zerstörungsfreie Prüfung von Beton und Mauerwerk mit aktiver Thermografie T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Aktive Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Mauerwerk KW - Hohlstellen KW - Kiesnester KW - Oberflächeneigenschaften KW - Feuchte PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB 113 (Mi.4.A.3) SP - 1 EP - 8 AN - OPUS4-18358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Kreutzbruck, Marc ED - Thompson, D. O. ED - Chimenti, D. E. T1 - Influence of surface properties on the detection and quantification of voids in concrete structures using active thermography N2 - Impulse thermography is an active method for quantitative investigations of the near surface region of various structures. It has recently been applied and optimized to applications in civil engineering. For quantitative analysis of data recorded on the building site, the problems are manifold. Here, the influence of the different surface properties on the detection and characterization of voids and honeycombing simulated by polystyrene cubes and cubes prepared of porous concrete are demonstrated. T2 - 35th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Chicago, IL, USA DA - 2008-07-20 KW - Active thermography KW - Pulse phase thermography KW - Surface properties KW - Emissivity KW - Concrete KW - Voids KW - Honeycombing PY - 2009 SN - 978-0-7354-0629-2 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 1096 SP - 1505 EP - 1511 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-19438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Untersuchung von Betonstrukturen mit der Puls-Phasen-Thermografie T2 - Thermografie-Kolloquium 2003 CY - Stuttgart, Deutschland DA - 2003-09-25 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Impuls-Thermografie KW - Puls-Phasen Thermografie KW - Beton KW - Spaltklinker KW - Hohlstellen KW - Ablösungen PY - 2003 UR - http://www.ndt.net/search/docs.php3?date=2006-01&issue=1 SN - 3-931381-51-X N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 86-CD SP - 53 EP - 62 PB - DGZfP CY - Berlin AN - OPUS4-3158 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Structural investigation of concrete and masonry structures behind plaster by means of pulse phase thermography T2 - 7th International Conference on Quantitative Infrared Thermography (QIRT 2004) CY - Rhode-St-Genese, Belgien DA - 2004-06-05 KW - Pulse phase thermography KW - Nondestructive testing in civil engineering KW - Plaster KW - Concrete KW - Masonry KW - Delaminations KW - Voids PY - 2004 SP - I.3.1 EP - I.3.6 PB - Karman Institute for Fluid Dynamics CY - Rhode-St-Genese AN - OPUS4-4397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arndt, Ralf A1 - Hillemeier, B. A1 - Maierhofer, Christiane A1 - Rieck, C. A1 - Röllig, Mathias A1 - Scheel, H. A1 - Walther, A. T1 - Zerstörungsfreie Ortung von Fehlstellen und Inhomogenitäten in Bauteilen mit der Impuls-Thermografie KW - Impuls-Thermografie KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung KW - Ortung von Fehlstellen KW - Ablösungen und Verpressfehler PY - 2004 SN - 0005-6820 SN - 1437-0999 SN - 0341-1052 SN - 0932-6359 SN - 0932-8351 VL - 81 IS - 10 SP - 786 EP - 793 PB - Ernst CY - Berlin AN - OPUS4-4572 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Weritz, Friederike A1 - Wiggenhauser, Herbert T1 - Ortung von Putzablösungen auf Beton und Mauerwerk mit der Puls-Phasen-Thermografie N2 - Abstract In the recent years the application of infrared thermography and especially its active approaches lock-in thermography, impulse themography and pulse phase thermography (PPT) has gained more importance for non-destructive testing (NDT). In this paper it is demonstrated that PPT is very well suited for NDT in civil engineering. The method is based on pulse heating of the investigated specimen and on the observation of the cooling down process on its surface with an infrared camera. The transient behaviour is afterwards analysed with Fast Fourier Transformation, enabling the creation of phase and amplitude images with enhanced visualisation of the defects. Results of European and National (i.e. DFG) funded projects are presented, for example the detection of voids and inhomogeneities close to the surface and the localisation of delaminations on plastered concrete and masonry specimen. ZUSAMMENFASSUNG Im Rahmen eines von der Deutschen Forschungsgemeinschaft geförderten Vorhabens zur zerstörungsfreien Prüfung im Bauwesen wird in der Bundesanstalt für Materialforschung und -prüfung (BAM) in Zusammenarbeit mit der Technischen Universität Berlin (TUB) die Puls-Phasen-Thermografie (PPT) weiterentwickelt, bewertet und eingesetzt. Die durch die Impuls-Thermografie (IT) aufgenommenen Daten werden mittels Fast Fourier Transformation (FFT) bearbeitet. Die durch die FFT gewonnenen Phasenbilder reduzieren die Störeinflüsse von Oberflächeninhomogenitäten und ungleichmäßiger Erwärmung. Die dargestellten Ergebnisse zeigen deutlich, dass sich die PPT sehr gut zur zerstörungsfreien Prüfung im Bauwesen eignet. Insbesondere Inhomogenitäten im oberflächennahen Bereich, wie Ablösungen und Hohlstellen hinter Beschichtungen (Putz, CFK-Laminate etc.), aber auch Defekte in größeren Tiefen können zuverlässig geortet und bildgebend dargestellt werden. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Putz auf Beton und Mauerwerk KW - Ortung von Fehlstellen und Ablösungen PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v89/v89.htm SN - 3-931381-55-2 SP - 1(?) EP - 10(?) PB - DGZfP CY - Berlin AN - OPUS4-5285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weritz, Friederike A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert T1 - Investigation of concrete structures with pulse phase thermography N2 - The applicability of pulse phase thermography (PPT) for the investigation of structures is studied systematically on concrete test specimens and on a plastered sandstone column. In the test specimens, voids and delaminations are implemented in different depths and with different sizes, modelling real voids, honeycombing and debonding. Delaminations of plaster in concrete and masonry and behind tiles on concrete are investigated. PPT is based on the frequency analysis of the cooling down process of actively heated surfaces. Therefore, it is contactless and thus completely non-destructive (if overheating of the surface is prevented), fast and allows the inspection of large surface areas. The interpretation of amplitude and phase images gives semi-quantitative information about the observed defects. The phase images provide a deeper probing up to 10–15 cm in relation to the interpretation of the thermograms and to the amplitude images. In addition, the influence of surface inhomogeneities and non-uniform heating is reduced. KW - Pulse phase thermography KW - Impulse thermography KW - Concrete KW - Voids KW - Honeycombing PY - 2005 DO - https://doi.org/10.1007/BF02481657 SN - 1359-5997 SN - 1871-6873 VL - 38 IS - 9 SP - 843 EP - 849 PB - Springer CY - Dordrecht AN - OPUS4-12300 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Rieck, C. A1 - Walther, A. A1 - Scheel, H. A1 - Hillemeier, B. T1 - Application of impulse-thermography for non-destructive assessment of concrete structures N2 - Impulse-thermography is an active method for quantitative investigations of the near surface region of various structures. It has recently been applied and optimised to applications in civil engineering. By using either an internal or external heat source, parts of the structure under investigation are heated up and the transient heat flux is observed by recording the temperature change at the surface as a function of time. This method is very well suited for the detection of voids and honeycombing in concrete, up to concrete covers of 10 cm as well as for the location of delaminations in multi-layered systems (e.g. plaster on concrete, CFRP-laminates on concrete, asphalt on concrete). Also safety relevant defects like voids in tendon ducts and cracks in concrete could be recognised. KW - Non-destructive testing KW - Impulse-thermography KW - Concrete KW - CFRP-laminates KW - Delamination KW - Tendon duct KW - Voids KW - Compaction faults PY - 2006 DO - https://doi.org/10.1016/j.cemconcomp.2006.02.011 SN - 0958-9465 SN - 1873-393X VL - 28 IS - 4 SP - 393 EP - 401 PB - Elsevier CY - Barking, Essex AN - OPUS4-12359 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Hillemeier, B. A1 - Rieck, C. A1 - Scheel, H. A1 - Walther, A. T1 - Struktur- und Feuchteuntersuchungen von Bauteil- und Bauwerksoberflächen mit der Impuls-Thermografie T2 - Thermografie-Kolloquium der DGZfP CY - Stuttgart, Deutschland DA - 2005-09-22 KW - Impulse-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Mauerwerk PY - 2005 SN - 3-931381-68-4 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 98-CD SP - 1(?) EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-11491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Maierhofer, Christiane T1 - Quantitative Untersuchung von Fehlstellen in Beton mit der Impuls-Thermografie und der Puls-Phasen-Thermografie T2 - Thermographie-Kolloquium 2005 CY - Stuttgart, Deutschland DA - 2005-09-22 KW - Impulse-Thermografie KW - Puls-Phasen-Thermografie KW - Zerstörungsfreie Prüfung im Bauwesen KW - Beton KW - Fehlstellen PY - 2005 SN - 3-931381-68-4 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 98-CD SP - 1(?) EP - 13(?) PB - DGZfP CY - Berlin AN - OPUS4-11684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias T1 - Quantitative Pulse-Phase-Thermography for Masonry and Concrete Structures N2 - An advanced quantitative approach of pulse-phase-thermography for nondestructive testing in civil engineering is described in this contribution. The characteristic frequency of the maximum phase-contrast between defects and sound areas is used as a means for the characterization of its depth. The new approach is tested in the laboratory on concrete structures with defects of polystyrene. The surfaces of the structures were heated with IR-radiators for varying time periods. The presented investigations were funded by the Deutsche Forschungsgemeinschaft (DFG) and were carried out in co-operation with the Technical University of Berlin (TUB). T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Quantitative non-destructive investigation KW - Impulse-thermography KW - Pulse-phase-thermography KW - Blind / characteristic frequency KW - Concrete PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 8(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-13793 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Arndt, Ralf A1 - Helmerich, Rosemarie A1 - Maierhofer, Christiane A1 - Röllig, Mathias ED - Forde, M. T1 - Quantitative Pulse-Phase-Thermography for Composites and Concrete Structures N2 - The active approach for non-destructive-testing in Civil Engineering (NDT-CE) with infraredthermography (IR), developed at the Federal Institute for Materials Research and Testing (BAM), is described in part one of this contribution. The active IR-approach is based on the principles of impulse- (IT) and pulse-phase-thermography (PPT). The concept is a direct result of a research project at the BAM in cooperation with the Technical University of Berlin (TUB) and was funded by the Deutsche Forschungsgemeinschaft (DFG). In the second part results of the new thermography-scanning system (thermo-scanner) of BAM on debonding of multi-layered structures, especially carbon fibre reinforced plates (CFRP) on concrete are presented. Both, the thermo-scanner developed at BAM, and the investigations carried out, are part of the EU-Project Sustainable Bridges. In the third part of the paper the characteristic frequency of the optimum phase-contrast as a means for the characterization of defects’ depth in CE by means of PPT is introduced. A new quantitative approach is tested and discussed on concrete structures with defects of polystyrene and gas concrete. T2 - 11th International Conference and Exhibiton "Structural Faults and Repair - 2006" CY - Edinburgh, Scotland, UK DA - 2006-06-13 KW - Quantitative NDT KW - Impulse-thermography KW - Pulse-phase-thermography KW - Blind / characteristic frequency KW - Concrete KW - Thermo-scanner KW - CFRP-laminates KW - Debonding KW - Voids PY - 2006 SN - 0-947644-59-8 SP - 1(?) EP - 17(?) PB - Engineering Technics Pr., CY - Edingburgh AN - OPUS4-13794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias T1 - Aktive Thermografie zur zerstörungsfreien Ortung von Ablösungen und Fehlstellen in Beton und Mauerwerk T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Aktive Thermografie KW - Beton KW - Historisches Mauerwerk KW - Praktische Anwendungen PY - 2006 SN - 3-931381-71-4 SP - 1 EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-14120 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Borchardt, Kerstin A1 - Hasenstab, Andreas A1 - Röllig, Mathias A1 - Wöstmann, Jens ED - Radic, J. ED - Rajcic, V. ED - Zarnic, R. T1 - Structural assessment with radar and active thermography T2 - Conference and Brokerage Event "The Construction Aspects of the Heritage Protection" CY - Dubrovnik, Croatia DA - 2006-10-14 KW - Non-destructive testing in civil engineering KW - Radar KW - Active thermography KW - Historic structures KW - Masonry KW - Stone KW - Wood KW - Plaster PY - 2006 IS - CD-ROM SP - 77 EP - 86 PB - SECON (Structural Engineering Conferences) CY - Dubrovnik AN - OPUS4-14255 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Helmerich, Rosemarie A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Vielhaber, J. ED - Cruz, P. ED - Frangopol, D. T1 - Bond quality survey of loaded RC beams with CFRP-plate repair using impulse-thermography T2 - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost CY - Porto, Portugal DA - 2006-07-16 KW - Thermography KW - Quality control KW - Bonding KW - Carbon fibre KW - Concrete bridges KW - Repair KW - Strengthening PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 331-332 (Book)/ 9 pages (CD-ROM) PB - Taylor & Francis CY - London AN - OPUS4-14412 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Arndt, Ralf A1 - Röllig, Mathias A1 - Helmerich, Rosemarie A1 - Walther, A. A1 - Hillemeier, B. A1 - Rieck, C. T1 - Quantification of Voids and Elaminations in Real Concrete and Masonry Structures with Active Thermography: Case Studies T2 - 8th International Conference on Quantitative InfraRed Thermography (QIRT 2006) CY - Padova, Italy DA - 2006-06-28 KW - Non-destructive testing in civil engineering KW - Active thermography KW - Pulse-phase thermography KW - Plaster KW - Tiles KW - Asphalt KW - Numerical simulation PY - 2006 UR - http://qirt.gel.ulaval.ca/archives/qirt2006/papers/049.pdf SP - 49, 1 EP - 10 (?) CY - Padova, Italy AN - OPUS4-15710 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Arndt, Ralf A1 - Maierhofer, Christiane A1 - Röllig, Mathias A1 - Walsdorf-Maul, Manuela T1 - Quantitative Phasen- und Amplitudenauswertung im Frequenzbereich für aktive Thermografie mit Rechteckimpuls-Erwärmung N2 - Nach einer Einführung in die Puls-Phasen-Thermografie (PPT) wird ein neuer Ansatz für die Defekttiefenbestimmung im Frequenzraum mittels der sogenannten charakteristischen Frequenz des minimalen Phasen- und Amplitudenkontrastes zwischen Fehlstelle und ungestörtem Bereich entwickelt und anhand von systematischen Untersuchungen an Probekörpern der Bundesanstalt für Materialforschung und -prüfung und ergänzenden Simulationsrechnungen überprüft. Die mit Rechteckimpuls-Spektral-Thermografie (RST) bezeichnete Methode, die auch als eine Rechteckimpuls-Thermografie (RIT) im Frequenzbereich oder eine durch Amplitudenauswertung ergänzte PPT für Rechteckimpulserwärmung verstanden werden kann, soll die existierenden Ansätze ergänzen und bietet eine Alternative für die Tiefenbestimmung von Defekten bei Messungen mit langen Erwärmungs- und Beobachtungszeiten, wie sie bei Anwendung von aktiver Thermografie im Bauwesen häufig vorkommen. T2 - Thermografie-Kolloquium 2007 CY - Stuttgart, Deutschland DA - 2007-09-27 KW - Puls-Phasen-Thermografie KW - Rechteckimpuls-Erwärmung KW - Zerstörungsfreie Prüfung im Bauwesen KW - Quantitative Methode PY - 2007 SN - 978-3-940283-03-0 IS - 107-CD SP - 52 EP - 60 AN - OPUS4-16128 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weiser, M. A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Erdmann, B. T1 - Development and test of a numerical model for pulse thermography in civil engineering N2 - Pulse thermography of concrete structures is used in civil engineering for detecting voids, honeycombing and delamination. Quantitatively realistic numerical 3D simulation is difficult due to the arising boundary layer at the heated surface and unreliable information about material parameters and environmental conditions. We address both issues by a semi-analytic reformulation of the heat transport problem and by parameter identification. Numerical results are compared with measurements of a test specimen. PY - 2010 DO - https://doi.org/10.1007/s00231-010-0656-9 SN - 0947-7411 VL - 46 IS - 11-12 SP - 1419 EP - 1428 PB - Springer CY - Berlin AN - OPUS4-23973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -