TY - CONF A1 - Portella, Pedro Dolabella T1 - Werkstoffaspekte bei der Auslegung von Windenergietürmen T2 - VDI-Fachkonferenz "Turm und Fundament von Windenergieanlagen" CY - Hamburg, Germany DA - 2011-10-12 PY - 2011 AN - OPUS4-24667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Schadensanalyse an Eisenbahnkomponenten T2 - Seminarvortrag am Institut für Werkstofftechnik, Universität Kassel CY - Kassel, Germany DA - 2011-01-27 PY - 2011 AN - OPUS4-24668 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Mit Sicherheit innovativ: Der Beitrag der Werkstofftechnik T2 - Ehrenkolloquium für Prof. Bernhard Wielage, Technische Universität Chemnitz CY - Chemnitz, Germany DA - 2011-09-01 PY - 2011 AN - OPUS4-24669 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Aerogeradores offshore: problems e possíveis soluções T2 - Plenarvortrag, Dia dos Materiais 2011 CY - Lisbon, Portugal DA - 2011-11-02 PY - 2011 AN - OPUS4-24674 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - De Araújo, A. A1 - Panossian, Z. A1 - Portella, Pedro Dolabella A1 - Bäßler, Ralph T1 - Monitoramento da corrosao em estruturas de concreto: sensor galvânico N2 - O monitoramento das estruturas de concreto possibilita que o risco de corrosão seja estimado ao longo dos anos de sua utilização. Com o conhecimento desse risco, intervenções de prevenção da corrosão ou de controle da corrosão já estabelecida podem ser programadas e realizadas em períodos adequados. Na prática, o risco de corrosão é avaliado por meio da verificação periódica do estado da armadura e das alterações nas propriedades do concreto. Isso pode ser feito por meio do embutimento no concreto de cobrimento de sensores de aquisição contínua de dados. Há diferentes tipos de sensores de aquisição contínua de dados. Um dos mais conhecidos é o sensor galvânico que consta de um conjunto de barras de aço-carbono, eletricamente isoladas. Com o embutimento do sensor, essas barras ficam posicionadas em diferentes e conhecidas profundidades do concreto de cobrimento da armadura. O risco de corrosão da armadura é monitorado com a periódica medição da corrente galvânica em cada uma das barras do sensor. Essa medição, dentre outras informações do sensor galvânico foram abordadas em artigo anterior. Além do sensor galvânico, destacam-se o sensor de umidade e o de taxa de corrosão, que monitoram parâmetros importantes relacionados ao estabelecimento e evolução de processo corrosivo das armaduras. A seguir esses sensores são apresentados, bem como o sensor de fibra óptica, o qual apresenta algumas vantagens em relação aos demais mencionados, embora ainda seja de uso restrito. KW - Sensor da corrosao PY - 2013 SN - 0104-1053 VL - 194 IS - Maio SP - 62 EP - 66 PB - PINI AN - OPUS4-29403 LA - por AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - The contribution of the Platform MaterialDigital (PMD) in building up a Materials Data Space - Application to glass design and manufacturing N2 - Suitable material solutions are of key importance in designing and producing components for engineering systems – either for functional or structural applications. Materials data are generated, transferred, and introduced at each step along the complete life cycle of a component. A reliable materials data space is therefore crucial in the digital transformation of an industrial branch. A great challenge in establishing a materials data space lies in the complexity and diversity of materials science and engineering. It must be able to handle data from different knowledge areas over several magnitudes of length scale. The Platform MaterialDigital (PMD) is expected to network a large number of repositories of materials data, allowing the direct contact of different stakeholders as materials producers, testing labs, designers and end users. Following the FAIR principles, it will promote the semantic interoperability across the frontiers of materials classes. In the frame of a large joint initiative, PMD works intensively together with currently near 20 research consortia in promoting this exchange (www.material-digital.de). In this presentation we will describe the status of our Platform MaterialDigital. We will also present in more detail the activities of GlasDigital, one of the joint projects mentioned above dealing with the digitalization of glass design and manufacturing. (https://www.bam.de/Content/EN/Projects/GlasDigital/glasdigital.html) T2 - Onto Commons Workshop CY - Berlin, Germany DA - 04.04.2023 KW - Ontology KW - Data space PY - 2023 AN - OPUS4-58732 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jiao, Feng A1 - Österle, Werner A1 - Portella, Pedro Dolabella A1 - Ziebs, Josef T1 - Cyclic hardening of alloy 800h under biaxial loading T2 - International Congress Stainless Steels '96 ; 2nd European congress CY - Düsseldorf and Neuss, Germany DA - 1996-06-03 KW - Hochtemperaturtechnik KW - Beanspruchung, zyklisch KW - Stahl, austenitisch KW - Legierung 800 H PY - 1996 SN - 3-514-00601-6 SP - 292 EP - 293 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-695 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Frenz, Holger A1 - Kinder, Joachim A1 - Klingelhöffer, Hellmuth A1 - Portella, Pedro Dolabella ED - Petit, J. T1 - Fracture of single crystal superalloys under cyclic loading at high temperatures T2 - 11th Biennial European Conference on Fracture (ECF) CY - Poitiers-Futuroscope, France DA - 1996-09-03 KW - Einkristall KW - Superlegierung KW - Hochtemperaturverhalten KW - Turbine PY - 1996 SN - 0-947817-92-1 VL - 2 SP - 1207 EP - 1213 PB - EMAS CY - Warley, West Midlands AN - OPUS4-699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Frenz, Holger A1 - Gruhn, B. A1 - Dietrich, C. A1 - Lehmann, J. A1 - Krämer, E. A1 - Glaubitz, Steffen A1 - Wimmer, J. A1 - Rehmer, Birgit A1 - Kühn, Hans-Dieter A1 - Breitkreutz, Konrad A1 - Portella, Pedro Dolabella A1 - Hoffmann, E. A1 - Ziebs, Josef T1 - Sphäroguß als Werkstoff für Behälter zur Beförderung, Zwischen- und Endlagerung radioaktiver Stoffe; Untersuchung zu alternativen Eignungsnachweisen - Fachband 3: Werkstoffuntersuchungen, 1989 - 1992 N2 - Gußeisen mit Kugelgraphit und ferritischer bzw. ferritisch-perlitischer Matrix gehören zu einer Werkstoffgruppe, die ausreichende Festigkeiten mit hohen Duktilitäten verbindet. Mit der vorliegenden Arbeit wurden die Kenntnisse über die Zusammenhänge zwischen der chemischen Zusammensetzung, der Gefügeausbildung und den mechanischen Eigenschaften erweitert. Dabei wurden sowohl unterschiedliche Gießverfahren (Sand- und Kokillenguß) in der Herstellung, als auch die Auswirkungen von Umwandlungsprozessen im Gefüge infolge von Wärmebehandlungen diskutiert. Die statistische Auswertung von Einzelergebnissen aus der qualitätssichernden Begutachtung von Lager- und Transportbehältern für radioaktive Stoffe wurden durch mechanische und bruchmechanische Untersuchungen an 24 Werkstoffsorten aus Gußeisen mit Kugelgraphit ergänzt. KW - Eignungsnachweis KW - Endlagerung KW - Lagerbehälter KW - Radioaktiver Stoff KW - Sphäroguß (GGG-40) KW - Transportbehälter KW - Zwischenlagerung PY - 1992 N1 - Das Projekt wurde gefördert vom Bundesminister für Forschung und Technologie (BMFT); Förderkennzeichen: KWA 79052. SP - 1 EP - 178 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-59950 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - High power laser hybrid welding for ship building T2 - Welding Symposium, COTEQ 2011, 11a Conferencia de Tecnologia de Equipamentos CY - Ipojuca, Brazil DA - 2011-05-12 PY - 2011 AN - OPUS4-24673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Frenz, Holger A1 - Kinder, Joachim A1 - Klingelhöffer, Hellmuth A1 - Portella, Pedro Dolabella T1 - Microstructural evolution and fracture mechanisms of single crystal superalloys under cyclic loading at high temperatures T2 - 17. Tagung des DVM-Arbeitskreises Rastermikroskopie in der Materialprüfung CY - Halle (Saale), Deutschland DA - 1996-03-27 KW - Einkristall KW - Superlegierung KW - Hochtemperatur PY - 1996 N1 - Serientitel: Tagung des DVM-Arbeitskreises Rastermikroskopie in der Materialprüfung – Series title: Tagung des DVM-Arbeitskreises Rastermikroskopie in der Materialprüfung IS - 17 SP - 275 EP - 280 PB - DVM, Geschäftsstelle CY - Berlin AN - OPUS4-665 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Portella, Pedro Dolabella A1 - Frenz, Holger A1 - Kinder, Joachim A1 - Bertram, Albrecht A1 - Fahlbusch, Erec ED - Lütjering, G. T1 - Cyclic behaviour of the single crystal superalloy SRR99 at 980 degrees C T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 KW - Einkristall KW - Superlegierung KW - Hochtemperatur PY - 1996 SN - 0-08-042268-3 VL - 2 IS - 2 SP - 795 EP - 800 PB - Pergamon CY - Oxford AN - OPUS4-667 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Österle, Werner A1 - Portella, Pedro Dolabella A1 - Ziebs, Josef A1 - Jiao, Feng ED - Lütjering, G. T1 - Mechanical behaviour of alloy 800h under cyclic biaxial loading T2 - 6th International Fatigue Congress CY - Berlin, Germany DA - 1996-05-06 KW - Legierung KW - Belastung, zyklisch KW - Beanspruchung, mechanisch PY - 1996 SN - 0-08-042268-3 VL - 2 IS - 2 SP - 989 EP - 994 PB - Pergamon CY - Oxford AN - OPUS4-669 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kannengießer, Thomas A1 - Rethmeier, Michael A1 - Portella, Pedro Dolabella A1 - Ewert, Uwe A1 - Redmer, Bernhard T1 - Assessment of hot cracking behaviour in welds N2 - Hot crack assessment during production and processing of metallic materials is an essential prerequisite for the safety of welded structures. The hot cracking investigations presented here were carried out as part of a study aimed at the development of Cr/Ni low transformation temperature filler materials. Low transformation temperature alloys open up the possibility for welding high strength steels. The externally loaded Modified Varestraint Transvarestraint hot cracking test was employed in the experiments described. The hot cracking resistance was evaluated with the help of light microscopy applied at the specimen surface. The proportionality between hot cracking susceptibility and Cr/Ni alloy content was explained by the altered solidification kinetics and by the enlarged solidification interval. The internal crack paths and the three-dimensional structure of the crack net in the material volume were examined using X-ray computer tomography. The total crack lengths for different material depths and circumjacent rectangular volumes, respectively, were be determined. An increasing hot cracking susceptibility with increasing Cr/Ni alloy content was also be established for the specimen volume. KW - Hot cracking KW - Low transformation temperature (LTT) alloy KW - Modified varestraint transvarestraint (MVT) hot cracking test KW - X-ray computer tomography PY - 2011 DO - https://doi.org/10.3139/146.110545 SN - 1862-5282 VL - 102 IS - 8 SP - 1001 EP - 1006 PB - Carl Hanser CY - München AN - OPUS4-24400 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella A1 - Ulbricht, Alexander A1 - Evans, Alexander A1 - Altenburg, Simon A1 - Ehlers, Henrik A1 - Hilgenberg, Kai A1 - Mohr, Gunther T1 - Monitoring additive manufacturing processes by using NDT methods N2 - In this presentation we discuss the online monitoring of metallic AM parts produced by the Laser Powder Bed Fusion (LPBF) process by using optical, thermographic and electromagnetic methods. In a first approach we present the detection of defects generated during the process and discuss how to improve these methods for the optimization of design and production of metallic AM parts. T2 - ABENDI - Workshop CY - Online meeting DA - 19.11.2020 KW - Additive Fertigung PY - 2020 AN - OPUS4-52042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Monitoring additive manufacturing N2 - Additive manufacturing (AM) processes allow a high level of freedom in designing and producing components for complex structures. They offer the possibility of a significant reduction of the process chain. However, the large number of process parameters influence the structure and the behavior of AM parts. A thorough understanding of the interdependent mechanisms is necessary for the reliable design and production of safe AM parts. In this presentation we discuss the online monitoring of metallic AM parts produced by the Laser Powder Bed Fusion (LPBF) process by using optical, thermographic and electromagnetic methods. In a first approach we present the detection of defects generated during the process and discuss how to improve these methods for the optimization of design and production of metallic AM parts. T2 - Conaendi&IEV 2021 CY - Online meeting DA - 10.03.2021 KW - Additive Fertigung PY - 2021 AN - OPUS4-52241 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Andrade Silva, F. A1 - Williams, J. J. A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Portella, Pedro Dolabella A1 - Chawla, N. T1 - Three-dimensional microstructure visualization of porosity and Fe-rich inclusions in SiC particle-reinforced Al alloy matrix composites by X-ray synchrotron tomography N2 - Microstructural aspects of composites such as reinforcement particle size, shape, and distribution play important roles in deformation behavior. In addition, Fe-rich inclusions and porosity also influence the behavior of these composites, particularly under fatigue loading. Three-dimensional (3-D) visualization of porosity and Fe-rich inclusions in three dimensions is critical to a thorough understanding of fatigue resistance of metal matrix composites (MMCs), because cracks often initiate at these defects. In this article, we have used X-ray synchrotron tomography to visualize and quantify the morphology and size distribution of pores and Fe-rich inclusions in a SiC particle-reinforced 2080 Al alloy composite. The 3-D data sets were also used to predict and understand the influence of defects on the deformation behavior by 3-D finite element modeling. KW - Synchrotron radiation KW - X-ray tomography KW - X-ray refraction KW - Analyser based imaging KW - Metal matrix composite (MMC) KW - Fatigue PY - 2010 DO - https://doi.org/10.1007/s11661-010-0260-0 SN - 1073-5623 SN - 1543-1940 VL - 41 IS - 8 SP - 2121 EP - 2128 PB - The Minerals, Metals and Materials Society CY - Warrendale AN - OPUS4-21629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Materials testing - How to put the right question and get the right answers T2 - MSE 2010, Keynote lecture CY - Darmstadt, Germany DA - 2010-08-24 PY - 2010 AN - OPUS4-21953 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Fiber reinforced titanium matrix composites: production, mechanical testing and damage characterization T2 - Materials Science & Technology 2007 Conference & Exhibition CY - Detroit, MI, USA DA - 2007-09-16 PY - 2007 AN - OPUS4-14959 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - High temperature fatigue of nickel-base superalloys single crystals T2 - Materials Science & Technology 2007 Conference & Exhibition CY - Detroit, MI, USA DA - 2007-09-16 PY - 2007 AN - OPUS4-14960 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - LCF and TMF behavior of a Ti-6242/SCS-6 titanium matrix composite T2 - Fatigue sous sollicitations thermiques, SF2M CY - Paris, France DA - 2007-05-23 PY - 2007 AN - OPUS4-14958 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -