TY - CONF A1 - Bettge, Dirk A1 - Bohraus, Stephan A1 - Schmidt, Rüdiger A1 - Portella, Pedro Dolabella ED - Lohrmann, M. ED - Rettenmayr, P. T1 - Aufbau einer fraktographischen online-Datenbank N2 - Fraktographischen Daten aus Schadensanalysen, Vergleichsversuchen und Vorhaben könnten der Fachöffentlichkeit im Bereich Fraktographie zur Verfügung gestellt werden, sofern das Urheberrecht es zulässt und außerdem ein geeignetes Medium existiert. Ein solches Medium könnte eine offene fraktographische online-Datenbank sein. Eine solche wird im Rahmen der AG Fraktographie im DVM-DGM Gemeinschaftsausschuss "Rasterelektronenmikroskopie in der Materialprüfung" zurzeit erarbeitet. T2 - Metallographietagung 2013 CY - Friedrichshafen, Germany DA - 18.09.2013 KW - Datenbank KW - Fraktographie KW - Schadensanalyse PY - 2013 SN - 978-3-88355-398-6 VL - 45 SP - 19 EP - 24 PB - Inventum CY - Bonn AN - OPUS4-50598 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Failure analysis and prevention - an interdisciplinary approach N2 - The advent of the Industrial Revolution was accompanied by several accidents of dramatic dimensions. The analysis of these events was the fundament for the continuous improvement in the reliability of technical systems. In the year 1871 the Prussian state created a technical institution dedicated for this task – the origin of BAM. Failure analysis and prevention is until today a central objective of our institute; due to its complex nature an interdisciplinary task. In our talk we will present an overview of the activities of BAM in the area of failure analysis; especial attention will be given to the corrosion aspects in the analysis of these cases. T2 - INTERCORR 2016 CY - Búzios, RJ, Brazil DA - 16.05.2016 KW - Failure analysis KW - Failure prevention PY - 2016 AN - OPUS4-36235 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella A1 - Trappe, Volker T1 - Non-destructive characterization methods for polymer matrix composites N2 - The mechanical behavior of fiber reinforced composites with polymer matrix is governed by several mechanisms operating at different length scales. In this contribution we describe first non-destructive techniques which are adequate for the characterization of the fiber-matrix interphase at a microscopic level. In a second step we describe on a mesoscopic level the influence of manufacturing related elements on the mechanical properties of rotor blades for wind turbines. We concentrate on thermography, laminography and ultrasound in connection with mechanical testing systems. Finally we present methods for monitoring rotor blades by using embedded optical fibers. T2 - Universidade do Estado do Rio de Janeiro (UERJ), Nova Friburgo, RJ, Brasilien CY - Online meeting DA - 26.11.2020 KW - Polymer matrix composites PY - 2020 AN - OPUS4-52043 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Charakterisierung metallischer Werkstoffe für Anwendungen bei hohen Temperaturen N2 - In diesem Beitrag werden am Beispiel von Gasturbinen Verfahren zur Charakterisierung des werkstoff-mechanischen Verhaltens sowie der Gefügeentwicklung von Bauteilen für Anwendungen bei hohen Temperaturen aufgezeigt. Gasturbinen sind technisch gesehen sehr interessante Systeme, die in der Energietechnik und in der Luftfahrt von hoher wirtschaftlicher Relevanz sind. Seit Jahrzehnten gelten Gasturbinen als klassische Innovationstreiber, für ihre Entwicklung wurden bereits maßgebliche Erneuerungen im Bereich der Aerodynamik und der Werkstofftechnik hervorgebracht. T2 - Deutsche Physikalische Gesellschaft Senior Expert Netzwerk CY - Online meeting DA - 20.01.2021 KW - Superlegierungen KW - Gasturbinen PY - 2020 AN - OPUS4-52045 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella A1 - Krebber, Katerina T1 - Fiber Optic Sensors for SHM - From Laboratory to Industrial N2 - The paper highlights the research activities in Germany and Europe in the development of distributed fiber optic sensor for structural health monitoring (SHM) like the monitoring of geotechnical and civil infrastructures and presents selected results achieved within these projects. T2 - Conaendi & IEV 2021 CY - Online meeting DA - 09.03.2021 KW - Fiber KW - Optic KW - SHM PY - 2021 AN - OPUS4-52254 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schilling, Markus A1 - Bruns, Sebastian A1 - Bayerlein, Bernd A1 - Kryeziu, Jehona A1 - Schaarschmidt, Jörg A1 - Waitelonis, Jörg A1 - Dolabella Portella, Pedro A1 - Durst, Karsten T1 - Seamless Science: Lifting Experimental Mechanical Testing Lab Data to an Interoperable Semantic Representation N2 - The scientific landscape is undergoing rapid transformations with the advent of the digital age which revolutionizes research methodologies. In materials science and engineering, an adoption of modern data management techniques is desirable to maximize the efficiency and accessibility of research efforts. Traditional practices in testing laboratories are usually inadequate for efficient data acquisition and utilization as they lead to local storage and difficulty in publication and correlation with other results. Electronic laboratory notebooks (ELNs) are promising prospects in this respect. Semantic concepts and ontologies enhance interoperability by standardizing experimental data representation. An in‐laboratory pipeline seamlessly integrating an ELN with transformation scripts to convert experimental into interoperable data in a machine‐actionable format is created in this study as a proof of concept. Tensile test results and the corresponding tensile test ontology are used exemplary. Linking ELN data to semantic concepts enriches the stored information while improving interpretability and reusability. Involving undergraduate students builds a bridge between theory and practice during their training and promotes their digital skills. This study underscores the potential of ELNs and knowledge representations as beneficial means toward improved data management practices that enhance collaborative research and education while ensuring compatibility with evolving standards and technologies. KW - Semantic Data KW - Data Integration KW - Tensile Test Ontology KW - Electronic Lab Notebook KW - Wissensrepräsentation KW - Education PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-618251 DO - https://doi.org/10.1002/adem.202401527 SP - 1 EP - 13 PB - Wiley VHC-Verlag AN - OPUS4-61825 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Role of materials data N2 - In a general sense, data are the output of experimental research work. In this workshop we will present some basic ideas concerning the reliability of experimental data; this is a central issue both for individuals or labs producing results as well as for scientists working on theoretical models and engineers designing a machine. Digitalization accelerates enormously the data exchange between these communities; however, the required level of confidence on experimental results increases in the same way. We invite all the participants to reflect upon the value of materials data for their own work. T2 - DCMS Summerschool 2017 CY - Dresden, Germany DA - 11.09.2017 KW - Materials data KW - Experimental data KW - Reliability PY - 2017 AN - OPUS4-42263 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Failure analysis and prevention - an interdisciplinary approach N2 - The advent of the Industrial Revolution was accompanied by several accidents of dramatic dimensions. The analysis of these events was the fundament for the continuous improvement in the reliability of technical systems. In the year 1871 the Prussian state created a technical institution dedicated for this task – the origin of BAM. Failure analysis and prevention is until today a central objective of our institute; due to its complex nature an interdisciplinary task. In our talk we will present an overview of the activities of BAM in the area of failure analysis and prevention; especial attention will be given to the VDI Guide 3822. T2 - DCMS Summerschool 2017 CY - Dresden, Germany DA - 11.09.2017 KW - Reliability of technical systems KW - VDI Guide 3822 PY - 2017 AN - OPUS4-42264 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bettge, Dirk A1 - Portella, Pedro Dolabella T1 - Die Beiträge von Adolf Martens und Emil Heyn zur Werkstofftechnik (1880-1920) N2 - Die Grundlagen der Metallographie wurden in der zweiten Hälfte des 19. Jahrhunderts von Henry Clifton Sorby in England und Adolf Martens in Deutschland gelegt. Den verfügbaren Quellen nach erfolgten diese Arbeiten unabhängig voneinander. In diesem Beitrag werden die Beiträge von Adolf Martens und Emil Heyn zur Etablierung der Metallographie als ein eigenständiges Fach im Rahmen der Metallkunde dargestellt. Dabei werden Aspekte der Werkstoffprüfung, der Fraktographie und der Schadensanalyse einbezogen. Abschließend wird die führende Rolle dieser Pioniere der Metallkunde bei der Gründung der Deutschen Gesellschaft für Materialkunde (DGM) sowie des Deutschen Verbands für Materialforschung und -prüfung (DVM) gewürdigt. T2 - Metallographie-Tagung 2017 der DGM CY - Aalen, Germany DA - 13.9.2017 KW - Metallographie KW - Martens KW - Heyn KW - Geschichte PY - 2017 AN - OPUS4-42240 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Portella, Pedro Dolabella A1 - Helmerich, Rosemarie T1 - Adolf Martens and his contribution to materials engineering N2 - Adolf Martens (1850–1914) was a pioneer of materials engineering. After his studies in Berlin he joined a railway company being responsible for the technical equipment. His interest for the basic mechanisms of mechanical strength and fracture of metallic materials led him to the development of the basic concepts for metallography; his papers published between 1878 and 1889 laid the fundament of this technique. In 1880 Martens changed to the Royal Industrial Academy in Berlin and by 1884 he was designated as director of the Materials Testing Laboratory at the Technical University Berlin. Under his guidance this institution acquired an excellent reputation in all relevant areas of the German industry, forming the nucleus of the Bundesanstalt für Materialforschung und -prüfung (BAM) – the Federal Institute for Materials Research and Testing. Martens developed equipment in many different areas as mechanical testing of metallic materials and of paper, characterization of the wear behavior of materials and viscosity of lubricants. His overwhelming contribution to materials engineering was recognized as early as 1895 by Floris Osmond, who denominated martensite a metallographical constituent resulting from quenching of steels. In 2000 ISO designated the value obtained from the instrumented indentation method as Martens Hardness – HM. KW - Adolf Martens KW - Microscopy KW - Metallography KW - Mechanical testing KW - Quality assurance in materials testing PY - 2014 DO - https://doi.org/10.1016/j.engfailanal.2014.03.001 SN - 1350-6307 SN - 1873-1961 VL - 43 IS - Special Issue 'A Tribute to Prof. A. Martens' SP - 2 EP - 10 PB - Elsevier Science Publ. CY - Oxford AN - OPUS4-30865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Der Beitrag der BAM zur Sicherheitstechnik am Beispiel der Schadensanalyse von Eisenbahnenkomponenten T2 - Seminar im Fachbereich Maschinenbau/Sicherheitstechnik der Bergischen Universität Wuppertal CY - Wuppertal, Germany DA - 2010-06-07 PY - 2010 AN - OPUS4-21609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Der Beitrag der BAM zur Sicherheitstechnik am Beispiel der Schadensanalyse von Eisenbahnenkomponenten T2 - Seminar im Fachbereich Maschinenbau der Ruhr Universität Bochum CY - Bochum, Germany DA - 2010-06-16 PY - 2010 AN - OPUS4-21610 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Physical metallurgy of single crystalline nickel base superalloys T2 - AMT 2010, Plenary lecture CY - Zakopane, Poland DA - 2010-06-23 PY - 2010 AN - OPUS4-21611 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klingelhöffer, Hellmuth A1 - Epishin, A. A1 - Link, T. A1 - Portella, Pedro Dolabella ED - Portella, Pedro Dolabella ED - T. Beck, ED - M. Okazaki, T1 - Low cycle fatigue of the single crystal nickel-base superalloy CMSX-4: anisotropy and effect of creep damage T2 - 6th International Conference on Low Cycle Fatigue (LCF 6) CY - Berlin, Germany DA - 2008-09-08 KW - Anisotropy of mechanical properties KW - Effect of creep damage on LCF KW - Single-crystal nickel-base superalloys PY - 2008 SP - 403 EP - 408 AN - OPUS4-17914 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Der Beitrag der BAM zur Sicherheitstechnik am Beispiel der Schadensanalyse von Eisenbahnkomponenten T2 - Seminar im Fachbereich Maschinenbau/Sicherheitstechnik der Bergischen Universität Wuppertal CY - Wuppertal, Germany DA - 2010-06-07 PY - 2010 AN - OPUS4-20404 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Materialversagen, Risiko und unscharfe Grenzen T2 - Tagung "Unscharfe Grenzen im Umwelt- und Technikrecht" CY - Aachen, Germany DA - 2011-03-25 PY - 2011 AN - OPUS4-23440 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Offshore wind energy plants - problems and possible solutions T2 - Keynote paper, Wind energy Symposium, COTEQ 2011, 11a Conferencia de Tecnologia de Equipamentos ABENDI / ABCM CY - Ipojuca, Brazil DA - 2011-05-12 PY - 2011 AN - OPUS4-23704 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Schadensanalyse an Eisenbahnkomponenten T2 - 13. Internationale Metallographie-Tagung CY - Leoben, Austria DA - 2010-09-29 PY - 2010 AN - OPUS4-21931 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Nickel-Basis-Superlegierungen: Gefüge, mechanisches Verhalten bei Hoch-temperatur, Modellierung T2 - Kolloquium des Instituts für Werkstoffwissenschaften der Universität Erlangen-Nürnberg CY - Erlangen, Germany DA - 2002-05-28 PY - 2002 AN - OPUS4-6098 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Standard reference materials T2 - Encontro International INMETRO de Metrologia e Qualidade CY - Rio de Janeiro, Brazil DA - 2002-04-10 PY - 2002 AN - OPUS4-6099 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Reference materials and reference procedures - a necessary tool for the quality management T2 - Encontro International INMETRO de Metrologia e Qualidade CY - Rio de Janeiro, Brazil DA - 2002-04-10 PY - 2002 AN - OPUS4-6100 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Cyclic behaviour of single crystal superalloys T2 - Davidson Symposium on Fatigue, 131st Annual TMS-Meeting CY - Seattle, WA, USA DA - 2002-02-19 PY - 2002 AN - OPUS4-6101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Neue Verfahren der Elektronen-mikroskopie - Anwendungen in der Werkstofftechnik T2 - 12. Internationales Metallographisches Kolloquium CY - Linz, Austria DA - 2002-11-06 PY - 2002 AN - OPUS4-6102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Portella, Pedro Dolabella T1 - Microstructure of directionally solidified nickel-base superalloys: a comparison of Bridgman and Liquid Metal Cooling (LMC) process T2 - Werkstoffwoche 2002 CY - Munich, Germany DA - 2002-10-02 PY - 2002 AN - OPUS4-6103 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -