TY - CONF A1 - Plarre, Rüdiger A1 - Steinbach, S. A1 - Roland, U. A1 - Trommler, U. A1 - Hoyer, C. T1 - Thermische Bekämpfungsverfahren im Holzschutz mit elektromagnetischen Wellen N2 - Bekämpfungsverfahren gegen Organismen, die in Deutschland Bauholz wirtschaftlich bedeutend schädigen können, sind in der DIN 68800 Teil 4: 02/2012 „Holzschutz - Bekämpfungs- und Sanierungsmaßnahmen gegen Holz zerstörende Pilze und Insekten“ regeltechnisch zusammengefasst und gewichtet. Dabei wird je nach Verfahren und Schadorganismus zwischen Regelsanierung und Sondermaßnahmen unterschieden. So wird z. B. bei den thermischen Maßnahmen im Sinne der Norm das sogenannte Heißluftverfahren gegen Insekten als Regelsanierung bezeichnet, wogegen es gegen Pilze nicht als solche ausgewiesen ist. Gleiches gilt für elektrophysikalische Verfahren sowohl gegen Pilze als auch gegen Insekten. Dies begründet sich dadurch, dass bei Erstellung der Norm Zweifel bezüglich weitgehender Allgemeingültigkeit und Praxisbewährtheit elektrophysikalischer Verfahren, wie sie zur Erwärmung des befallenen Holzes eingesetzt werden, bestanden. Somit erklärt sich auch, dass die Rahmenbedingungen einer erfolgreichen Bekämpfung mittels z. B. Mikrowellen denen des Heißluftverfahrens gleichgesetzt wurden, nämlich die vollständige Erwärmung des befallenen Holzbauteils auf eine Mindesttemperatur von 55° C für eine Dauer von mindestens 60 min. Die physikalisch-chemischen Vorteile der zeitgleichen Wärmegeneration im gesamten Holzkörper durch elektromagnetische Felder im Vergleich zum sukzessiven Wärmeeintrag durch Konduktion fanden keine Berücksichtigung. T2 - 22. Tagung des Sächsischen Holzschutzverbandes - Modernes Bauen mit Holz CY - Dresden, Germany DA - 16.03.2013 KW - Holzschutz KW - Mikrowellentechnik KW - Radiowellentechnik KW - Normung PY - 2013 SN - 978-3-8167-9132-4 SN - 978-3-8167-9133-1 SP - 107 EP - 115 PB - Fraunhofer IRB Verl. AN - OPUS4-29721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Roland, U. A1 - Trommler, U. A1 - Hoyer, C. A1 - Pfütze, C. A1 - Plarre, Rüdiger A1 - Rabe, C. A1 - Höhlig, B. A1 - Holzer, F. A1 - Kraus, M. A1 - Schmidt, D. A1 - Kopinke, F.-D. T1 - Radio-frequency heating for pest control, decontamination and drying of timber and masonry N2 - A number of very relevant processes for protection and reconstruction of buildings can be supported by controlled heating: elimination of pests without using hazardous Chemicals, drying and decontamination of timber and many other building materials. For this purpose, radio-frequency (RF) dielectric heating is an advantageous Option because the materials and structures can be heated directly by energy absorption in the volume, homogeneously and, if required, relatively fast. Compared to microwaves, the penetration depths are usually much larger and the flexibility with respect to different materials is wider. Namely, heating can also be realized for dry materials because the dielectric loss is as not closely related to the presence of water as for microwave applications. T2 - 14th International conference on microwave and high frequency heating CY - Nottingham, UK DA - 16.09.2013 KW - Radio-frequency heating KW - Drying KW - Decontamination KW - Pest control KW - Timber KW - Masonry PY - 2013 SN - 978-0-85358-293-9 SP - 112 EP - 115 AN - OPUS4-29269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Plarre, Rüdiger A1 - Brader, B. A1 - Lee, R.C. A1 - Burkholder, W. A1 - Kitto, G.B. A1 - Kao, Ch. A1 - Polston, L. A1 - Dorneanu, E. A1 - Szabo, I. T1 - A comparison of screening methods for insect contamination in wheat N2 - In collaboration with the United States Department of Agriculture and a number of major milling companies, the "Insect-Detect" immunoassay for analyzing insect contamination in grains has been compared with three more traditional methods, X-ray analysis, cracking and flotation, and the insect fragment test (IFT). Testing was carried out in blind fashion using clean wheat samples that were spiked with differing numbers of grain kernels infested with late instar larvae of the granary weevil (Sitophilus granarius (L.)). Three different laboratories analyzed the samples for each of the four methods. The collaborative trials showed that the insect immunoassay clearly provided the most accurate measurement of actual insect infestation, followed by X-ray analysis. While both cracking and flotation and IFT procedures provided a general measure of contamination, they showed much greater variability. KW - Immunoassay KW - Insect Infestation in Wheat KW - X-ray KW - Cracking and Flotation KW - Insect Fragment Test PY - 2002 DO - https://doi.org/10.1016/S0022-474X(01)00006-6 SN - 0022-474x VL - 38 IS - 1 SP - 75 EP - 86 PB - Pergamon Press CY - Oxford AN - OPUS4-1048 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plarre, Rüdiger A1 - Reichmuth, F. ED - Subramanyam, B. ED - Hagstrum, D. T1 - Impact KW - Prallmaschinen KW - Mechanische Schädlingsbekämpfung PY - 2000 SN - 0-7923-7976-4 PB - Kluwer Academic Publ. CY - Boston AN - OPUS4-904 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ueckerdt, Christiane A1 - Plarre, Rüdiger A1 - Hertel, Horst T1 - Attraktivität unterschiedlicher Bauholzqualitäten auf männliche Hausbockkäfer Hylotrupes bajulus (L.) (Coleoptera: Cerambycidae) N2 - Bei der Suche nach geeigneten Orten zur Paarung können männliche Hausbockkäfer verschiedene Holzarten und -Qualitäten anhand deren Eigenschaften diskriminieren. Da sich die Larven von Hylotrupes bajulus nur in Nadelholz entwickeln, ist es für Männchen dieser Art besonders attraktiv. In Verhaltensversuchen wurden die Reaktionen männlicher Hausbockkäfer auf fünf unterschiedliche Bauholzqualitäten (Holztypen) vergleichend und gegenüber Buchenholz untersucht. Darunter befanden sich Nadelholz in Form von Konstruktionsvollholz der Kiefer und der Fichte, schichtverleimtes Konstruktionsvollholz der Kiefer, kammergetrocknetes und luftgetrocknetes Kiefernholz sowie Buche als Laubholzvariante. Die Analyse des Verhaltens männlicher Hausbockkäfer ergab eine relative Reihung der Präferenz unterschiedlicher Bauholzqualitäten. Die Nadelhölzer wurden gegenüber dem Laubholz signifikant bevorzugt aufgesucht. Unter den Nadelholzvarianten wurde das Konstruktionsvollholz der Kiefer präferiert. Aufgrund dieser Ergebnisse ist davon auszugehen, dass die technische Trocknung von Kiefernholz zu Konstruktionsvollholz keine Widerstandsfähigkeit gegenüber einem Neubefall durch H. bajulus herbeiführt. KW - Hausbockkäfer KW - Orientierungsverhalten KW - Insektenresistente Bauholzqualität PY - 2012 SN - 0018-3881 VL - 53 IS - 1 SP - 18 EP - 23 PB - DRW-Verl. Weinbrenner CY - Leinfelden-Echterdingen AN - OPUS4-25352 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Plarre, Rüdiger A1 - Zocca, Andrea A1 - Spitzer, Andrea A1 - Benemann, Sigrid A1 - Gorbushina, Anna A1 - Li, Y. A1 - Waske, Anja A1 - Funk, Alexander A1 - Wilgig, Janka A1 - Günster, Jens T1 - Searching for biological feedstock material: 3D printing of wood particles from house borer and drywood termite frass N2 - Frass (fine powdery refuse or fragile perforated wood produced by the activity of boring insects) of larvae of the European house borer (EHB) and of drywood termites was tested as a natural and novel feedstock for 3D-printing of wood-based materials. Small particles produced by the drywood termite Incisitermes marginipennis and the EHB Hylotrupes bajulus during feeding in construction timber, were used. Frass is a powdery material of particularly consistent quality that is essentially biologically processed wood mixed with debris of wood and faeces. The filigree-like particles flow easily permitting the build-up of woodbased structures in a layer wise fashion using the Binder Jetting printing process. The Quality of powders produced by different insect species was compared along with the processing steps and properties of the printed parts. Drywood termite frass with a Hausner Ratio HR = 1.1 with ρBulk = 0.67 g/cm3 and ρTap = 0.74 g/cm3 was perfectly suited to deposition of uniformly packed layers in 3D printing. We suggest that a variety of naturally available feedstocks could be used in environmentally responsible approaches to scientific material sciences/additive manufacturing. KW - 3D printing KW - X-ray tomographic KW - SEM micrography KW - Drywood termite PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521517 DO - https://doi.org/10.1371/journal.pone.0246511 VL - 16 IS - 2 SP - e0246511 AN - OPUS4-52151 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steinbach, S. A1 - Plarre, Rüdiger A1 - Klutzny, Kerstin T1 - Untersuchungen zur Wirksamkeit von Mikrowellen zur Abtötung von 'echtem Hausschwamm' (Serpula lacrymans), 'Gemeinem Nagekäfer' (Anobium punctatum) und 'Hausbockkäfer' (Hylotrupes bajulus) N2 - Die Teilnehmer und auch Einsprecher der Arbeitsgruppe des DIN-Normenausschusses zum Teil 4 der DIN 68800 erinnern sich bestimmt an die geführten Diskussionen zu Punkt 10 „Elektrophysikalische Verfahren", hier speziell das Mikrowellenverfahren. Zum Zeitpunkt der Diskussion lagen zwar Untersuchungsberichte, die in Zusammenarbeit mit Materialprüfanstalten und verschiedener Mikrowellenanwender zur Bekämpfung von holzzerstörenden Insekten und Pilzen sowie eine Reihe von Veröffentlichungen nur waren diese nicht allen Mitgliedern des Normenausschusses bekannt. Obwohl dieses Verfahren in der Praxis seit mehreren Jahren erfolgreich eingesetzt wird, fehlte die wissenschaftliche Basis. PY - 2012 SN - 1615-4916 IS - September SP - 29 EP - 31 PB - DHBV GmbH CY - Köln AN - OPUS4-26571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stephan, Ina A1 - Kutnik, M. A1 - Conti, E. A1 - Klamer, M. A1 - Nunes, L. A1 - van Acker, J. A1 - Plarre, Rüdiger T1 - Guidance on the European Biocidal Products Regulation concerning Efficacy of Wood Preservatives N2 - In Europe wood preservatives belong to Product Type 8 (PT8) of the Biocidal Products Regulation (BPR, EU n. 528/2012), which regulates the authorisation of biocidal active substances and products in the European market. The applicant, who aims to obtain authorization to place a product onto the European market, needs to submit data to substantiate the label claims for the intended uses. Label claims are a central issue in the assessment of efficacy. The aim of this paper is to raise awareness of the recently issued “Guidance on the Biocidal Products Regulation” concerning the evaluation of efficacy of wood preservatives. This guidance document is addressed to the applicants as well as to the competent authorities of the member states of Europe in charge of assessing efficacy data, and has been in the public domain, in its latest version, since February 2017. The CEN/Technical Committee 38 “Durability of wood and wood based products” / WG 22 "Performance, assessment and specification” decided to bring the Guidance to a wider audience with the aim of disseminating the information and to trigger discussion among the experts of IRGWP. An excerpt of the Guidance that is relevant to wood preservative products is presented in an Annex to this paper. Keywords: Biocidal Products Regulation, BPR, authorisation, Guidance, PT8, curative wood preservatives, preventive wood preservatives. T2 - IRG48 Scientific Conference on Wood Protection CY - Universität Ghent, Belgium DA - 04.06. 2017 KW - Preventive wood preservatives KW - Biocidal Products Regulation KW - BPR KW - Authorisation KW - Guidance KW - PT8 KW - Curative wood preservatives PY - 2017 SN - 2000-8953 SP - IRG/WP 17-20627-1 EP - 17 AN - OPUS4-40576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schoknecht, Ute A1 - Plarre, Rüdiger A1 - Stephan, Ina ED - Lang, A. ED - Zimmer, J. T1 - Einführung in die biologische Wirksamkeitsprüfung von Bioziden im Materialschutz KW - Biozide KW - Materialschutz KW - Wirksamkeitsprüfung KW - Biocide KW - Material preservation KW - Efficiency test PY - 2015 SN - 9783861021940 SP - 48 EP - 50 PB - Deutsches Historisches Museum CY - Berlin AN - OPUS4-35411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Plarre, Rüdiger A1 - Stephan, Ina T1 - Neuerungen im Holzschutz durch angepasste Normungsarbeit N2 - Aufgrund einer dem modernen Holzschutz angepassten Normungsarbeit ergaben sich in den letzten Jahren zahlreiche Neuerungen. Diese betreffen sowohl die allgemeine Regelsetzung des Holzschutzes als auch spezielle Prüfstandards zur Wirksamkeitsbewertung von Holzschutzmitteln und -verfahren. KW - Normung KW - Holzschutz PY - 2011 SN - 0018-3881 VL - 52 IS - 2 SP - 50 EP - 51 PB - DRW-Verl. Weinbrenner CY - Leinfelden-Echterdingen AN - OPUS4-23358 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stephan, Ina A1 - Plarre, Rüdiger T1 - Biodeterioration-tests on wood/plastic composites N2 - The purpose of this article is to raise awareness about the possibilities for biodeterioration of wood/plastic composites (WPCs). It will introduce the European standards (EN) and technical specifications (TS) with which the durability of WPCs against microorganisms and termites can be tested. PY - 2008 SN - 0392-839X VL - 26 IS - 3 SP - 20 EP - 22 PB - TeknoScienze CY - Milano AN - OPUS4-17678 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -