TY - CONF A1 - Landsberger, Petra A1 - Boenke, Viola A1 - Gorbushina, Anna A1 - Rodenacker, K. A1 - Pierce, B.F. A1 - Kratz, K. A1 - Lendlein, A. T1 - Bacterial attachment on poly[acrylonitrile-co-(2-methyl-2-propene-1-sulfonic acid)] surfaces N2 - The influence of material properties on bacterial attachment to surfaces needs to be understood when applying polymer-based biomaterials. Positively charged materials can kill adhered bacteria when the charge density is sufficiently high but such materials initially increase the adherence of some bacteria such as Escherichia coli. On the other hand, negatively charged materials have been shown to inhibit initial bacterial adhesion, but this effect has only been demonstrated in relatively few biomaterial classes and needs to be evaluated using additional systems. Gradients in surface charge can impact bacterial adhesion and this was tested in our experimental setup. Moreover, the evaluation of bacterial adhesion to biomaterials is required to assess their potential for biological applications. Here, we studied the bacterial adhesion of E. coli and Bacillus subtilis on the surfaces of acrylonitrile-based copolymer samples with different amounts of 2-methyl-2-propene-1-sulfonic acid sodium salt (NaMAS) comonomer. The content related to NaMAS based repeating units nNaMAS varied in the range from 0.9 to 1.5 mol%. We found a reduced colonized area of E. coli for NaMAS containing copolymers in comparison to pure PAN materials, whereby the bacterial colonization was similar for copolymers with different nNaMAS amounts. A different adhesion behavior was obtained for the second tested organism B. subtilis, where the implementation of negative charges into PAN did not change the overall adhesion pattern. Furthermore, it was observed that B. subtilis adhesion was significantly increased on copolymer samples that exhibited a more irregular surface roughness. T2 - MRS Spring meeting 2013 CY - San Francisco, CA, USA DA - 01.04.2013 KW - Biomaterial KW - Biological KW - Polymer PY - 2013 DO - https://doi.org/10.1557/opl.2013.832 VL - 1569 IS - MRSS13-1569-NN15-13.R1 SP - 1 EP - 6 AN - OPUS4-30161 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lukowiak, M.C. A1 - Wettmarshausen, Sascha A1 - Hidde, Gundula A1 - Landsberger, Petra A1 - Boenke, Viola A1 - Rodenacker, K. A1 - Braun, Ulrike A1 - Friedrich, Jörg Florian A1 - Gorbushina, Anna A1 - Haag, R. T1 - Polyglycerol coated polypropylene surfaces for protein and bacteria resistance N2 - Polyglycerol (PG) coated polypropylene (PP) films were synthesized in a two-step approach that involved plasma bromination and subsequently grafting hyperbranched polyglycerols with very few amino functionalities. The influence of different molecular weights and density of reactive linkers were investigated for the grafted PGs. Longer bromination times and higher amounts of linkers on the surface afforded long-term stability. The protein adsorption and bacteria attachment of the PP-PG films were studied. Their extremely low amine content proved to be beneficial for preventing bacteria attachment. PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-325406 DO - https://doi.org/10.1039/c4py01375a SN - 1759-9954 SN - 1759-9962 VL - 6 IS - 8 SP - 1350 EP - 1359 AN - OPUS4-32540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, C. A1 - Schwibbert, Karin A1 - Achazi, K. A1 - Landsberger, Petra A1 - Gorbushina, Anna A1 - Haag, R. T1 - Active antibacterial and antifouling surface coating via a facile one-step enzymatic cross-linking N2 - Prevention of microbial contamination of surfaces is one of the biggest challenges for biomedical applications. Establishing a stable, easily produced, highly antibacterial surface coating offers an efficient solution but remains a technical difficulty. Here, we report on a new approach to create an in situ hydrogel film-coating on glass surfaces made by enzymatic cross-linking under physiological conditions. The cross-linking is catalyzed by horseradish peroxidase (HRP)/glucose oxidase (GOD)-coupled cascade reactions in the presence of glucose and results in 3D dendritic polyglycerol (dPG) scaffolds bound to the surface of glass. These scaffolds continuously release H2O2 as long as glucose is present in the system. The resultant polymeric coating is highly stable, bacterial-repellent, and functions under physiological conditions. Challenged with high loads of bacteria (OD540 = 1.0), this novel hydrogel and glucose-amended coating reduced the cell viability of Pseudomonas putida (Gram-negative) by 100% and Staphylococcus aureus (Gram-positive) by ≥40%, respectively. Moreover, glucose-stimulated production of H2O2 by the coating system was sufficient to kill both test bacteria (at low titers) with >99.99% Efficiency within 24 h. In the presence of glucose, this platform produces a coating with high effectiveness against bacterial adhesion and survival that can be envisioned for the applications in the glucose-associated medical/oral devices. KW - Antifouling KW - Surface coating KW - Biofilm KW - Bacterial adhesion PY - 2017 DO - https://doi.org/10.1021/acs.biomac.6b01527 SN - 1525-7797 SN - 1526-4602 VL - 18 IS - 1 SP - 210 EP - 216 AN - OPUS4-39003 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -