TY - GEN A1 - Müller, Christina A1 - Elagin, Mstislav A1 - Gaal, Mate A1 - Rosenthal, Martina A1 - Ewert, Uwe A1 - Osterloh, Kurt A1 - Wilrich, Peter-Th. T1 - Determination of reliability in demining and NDT N2 - The detection of defects in aircraft components or parts of a power plant or mines in the ground is connected with the task to distinguish between signals caused be the item searched for and noisy signals from other sources. The reliability of the system is the better the better the system is in detecting the wanted signal and avoiding false alarms caused by noise. It is usual to measure the reliability of diagnostic systems in terms of ROC-curves (Re-ceiver Operating Characteristics) and POD-curves (Probability of Detec-tion). The ROC curves describe the POD versus Probability of False Alarm with growing system sensitivity along the curve. POD curves describe the Probability of Detection for a fixed sensitivity for a variation of item sizes or depths. Reliability of the whole system is always a composition of the physics and technique, application influences and the human factors. For the scien-tific understanding and possibilities of improvement, decomposition accord-ing to a modular model is helpful. The authors present their experiences with the reliability evaluation of metal detectors for humanitarian demining and an NDT system of mechanized ultrasonic phased array testing of copper welds. The special concern in demining is the influence of soil types, detec-tors and the experiences of human beings. T2 - MATEST 2004 CY - Zagreb, Croatia DA - 2004-10-14 KW - Flaw Detection KW - Mine Detection KW - Prohability of Detection KW - Receiver Operating Characteristics KW - Metal Detector Test Trials PY - 2004 SN - 953-96225-9-X N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 183 EP - 201 AN - OPUS4-6047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Gaal, Mate A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Ewert, Uwe A1 - Lewis, A. A1 - Bloodworth, T. A1 - Wilrich, Peter-Th. A1 - Guelle, D. T1 - ITEP project 2.1.1.2 - Final report - Reliability model for test and evaluation of metal detectors N2 - Metal detectors used in demining have been tested within the frame of the International Test and Evaluation Programme project ITEP 2.1.1.2. Detection reliability tests were performed in accordance with the CEN workshop agreement describing specifications for test and evaluation (CWA 14747:2003). Results of these tests are aimed to verify and should help to optimise the proposed testing procedures. KW - Zuverlässigkeit der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2004 UR - http://www.itep.ws/pdf/Itep_no2.1.1.2_reliability_model.pdf N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 1 EP - 51 PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-6049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Christina A1 - Gaal, Mate A1 - Rosenthal, Martina A1 - Bär, Sylke A1 - Lewis, A. A1 - Bloodworth, T. A1 - Guelle, D. A1 - Wilrich, Peter-Th. T1 - ITEP-Test Trials for Detection Reliability Assessment of Metal Detectors N2 - The total reliability of a mine searching system is driven by the triple of intrinsic capability, which describes the physical-technical basis capability, the application and environmental factors and the human factors. Some of them can be determined in laboratory measurements but the human factor and a part of environment conditions and their interaction with the device need to be treated statistically. That is why the test & evaluation procedure described in CEN CWA 14747:2003, includes in addition to parameter tests of metal detectors also the reliability or blind field tests under local conditions with local personnel. A series of three big field trials had been accomplished in the ITEP-project 2.1.1.2 “Reliability Model for Test & Evaluation of Metal Detectors” to specify the optimum conditions for reliable trial results with affordable effort. For each set of specific working conditions, characterized in terms of a combination of one mine type in one soil with one detector handled by local personnel, the searching system will show up a working performance in mine detection rates as a function of mine depth and show up a certain overall false call rate. During the ITEP-trials in Benkovac and Oberjettenberg the authors learnt to determine this function separately for each mine type in each soil, which is especially important for low metal mines in uncooperative soil which will be illustrated for the mine PMA2 in different types of soil. The question of representativeness for field conditions on the one hand and necessary statistical set up for the possibility to distinguish between individual detector performances is still under discussion. KW - Zuverlässigkeit der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2005 UR - http://maic.jmu.edu/journal/8.2/rd/mueller.htm SN - 1533-9440 SN - 1533-6905 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. IS - 8.2 SP - 86 EP - 90 CY - Harrisonburg AN - OPUS4-6041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaal, Mate A1 - Müller, Christina A1 - Ewert, Uwe A1 - Wilrich, Peter-Th. A1 - Spyra, W. T1 - Trial Design for Testing and Evaluation of Metal Detectors Used in Humanitarian Landmine Clearance T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - Zuverlässigkeit in der Minensuche KW - Feldtests KW - Modulares Modell KW - Metalldetektor PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 10(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Elagin, Mstislav A1 - Rosenthal, Martina A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Schafer, Lloyd A1 - Wilrich, Peter-Th. T1 - Reliability Investigation of NDE Systems by Modular Analysis of Recorded Data N2 - During the second European-American Workshop on NDE Reliability, September 99 in Boulder, the term NDE reliability was defined as the degree that an NDT system is capable of achieving its purpose regarding detection, characterization and false calls. The most common – but also most expensive - way to determine this degree of capability in e.g. defect detection is to make just a performance demonstration using realistic test samples and to count the correct detections and false calls. For a more efficient way of reliability evaluation we propose to decompose the system into main modules e.g. according to the reliability formula set up on the first workshop: into f(IC) – a function of IC the intrinsic capability, determined by the physics and the technique of the NDE method representing an ideal upper bound of the reliability and g(AP) – a function of AP the industrial application factor like surface state or limited access to a component in general diminishing the ideal capability and finally h(HF) the function of the human factor which is in general also diminishing the ideal capability. The workshop proposed a rather plain mathematical shape for the formula R = f(IC) – g(AP) – h(HF) which should be considered merely as a “philosophical” expression but not as exact mathematical formula to be applied for evaluation of e.g. POD data. We propose to decompose the NDE system into modules in terms of functions of IC, AP and HF if appropriate or additional ones if necessary and then to analyze the mutual relationships of the terms via fault tree analysis. Finally the total reliability of the system is composed of the reliability of the subsystems via the rules of statistical systems theory. First trials for this approach of data analysis will be presented via examples from NDE systems in the aerospace industry. T2 - 8th ECNDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/428/428.htm N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. VL - 8 SP - 1(?) EP - 14(?) PB - European Federation for Non-Destructive Testing CY - Barcelona AN - OPUS4-2013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Rosenthal, Martina A1 - Wilrich, Peter-Th. A1 - Konchina, V. A1 - Markucic, D. A1 - Piscenec, Z. T1 - Proposals for Performance Demonstration and Modular Validation T2 - NDRF Summer Conference 2002 CY - Rosersberg, Sweden DA - 2002-08-28 PY - 2002 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 1(?) EP - 10(?) AN - OPUS4-2017 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Christina A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Völker, J. A1 - Schafer, Lloyd A1 - Wilrich, Peter-Th. T1 - Concepts in reliability measurement T2 - European-American Workshop 2002 CY - Berlin, BAM, Germany DA - 2002-09-11 PY - 2002 N1 - Geburtsname von Rosenthal, Martina: Scharmach, M. - Birth name of Rosenthal, Martina: Scharmach, M. SP - 1 EP - 9 AN - OPUS4-2018 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Christina A1 - Ewert, Uwe A1 - Rosenthal, Martina A1 - Bär, Sylke A1 - Schafer, Lloyd A1 - Völker, J. A1 - Wilrich, Peter-Th. T1 - Current status in the area of reliability of non-destructive testing and demining: Experience in Europe and USA T2 - Reliability and Diagnostics of Transport Structures and Means, Pardubice - Czech Republic CY - Pardubitz, Tschechische Republik DA - 2002-09-26 KW - Reliability of NDE Systems KW - Performance Demonstration KW - Essential Parameters KW - European Standards KW - Radiographic Testing KW - Film Digitalization KW - Austenitic Tube Welds KW - ROC KW - POD PY - 2002 SN - 80-7194464-5 SP - 1 EP - 14(?) PB - Univ. CY - Pardubice AN - OPUS4-2011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -