TY - CONF A1 - Geißler, Peter A1 - Schwarz, Johannes A1 - Cuéllar, Pablo A1 - Hüsken, Götz A1 - Baeßler, Matthias A1 - Kühne, Hans-Carsten A1 - Morrone, C. T1 - Compaction grouting to improve the pile bearing capacity in non-cohesive soil T2 - Proceedings of the Twenty-ninth (2019) International Ocean and Polar Engineering Conference N2 - The aim of an ongoing research project is to develop a design approach for typical offshore driven piles (e.g. Jacket piles) based on the application of injections by compaction grouting directly at the pile shaft. The paper aims to present the results of laboratory and in-situ tests, which reveal the efficiency and the promising potential of the optimised foundation concept for a more economic dimensioning of pile foundations and to increase their bearing capacity in non-cohesive soil at any moment after installation. T2 - Twenty-ninth International Ocean and Polar Engineering Conference CY - Honolulu, HI, USA DA - 16.06.2019 KW - Offshore Pile Foundation KW - Compaction Grouting KW - Grout KW - Injection Sequence KW - Tensile Capacity PY - 2019 SN - 978-1-880653-85-2 SN - 1098-6189 VL - II SP - 2178 EP - 2184 PB - International Society of Offshore and Polar Engineers (ISOPE) CY - Cupertino, California, USA AN - OPUS4-48505 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yozgatli, Hakan-Peter A1 - Geißler, Heinz A1 - Zschunke, Adolf T1 - Erfahrungen aus dem Ringversuch des TC 14 der ICG zur Vergleichbarkeit IR-spektroskopischer Transmissionsmessungen an Gläsern T2 - Kurzreferate / 76. Glastechnische Tagung T2 - 76. Glastechnische Tagung CY - Bad Soden, Deutschland DA - 2002-05-27 PY - 2002 SP - 238 EP - 241 PB - DGG, Deutsche Glastechnische Gesellschaft e.V. CY - Frankfurt/M. AN - OPUS4-1502 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geißler, Peter A1 - Cuéllar, Pablo A1 - Hüsken, Götz A1 - Kühne, Hans-Carsten A1 - Baeßler, Matthias T1 - Insights into compaction grouting for offshore pile foundations T2 - Proceedings of the ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering OMAE 2018 N2 - The authors are currently investigating the possibility to apply compaction grouting for offshore pile foundations (Jacket piles as well as monopiles) as a possible retrofitting technique for an optimised foundation concept. In this research project, we are developing a design approach aiming to predict the ideal amount and properties of a grout for a specific soil situation and desired improvement of pile bearing capacity after Installation and during service time. Both numerical and experimental tests have been carried out to investigate the injection process during which a highly viscous grout is injected into the soil under high pressure to displace and compact the surrounding soil without fracturing it. The implicit Material Point Method (MPM) based on a mixed formulation is the numerical technique chosen to deal with the expected large deformations and the arbitrary shape of the developing grout bulb. The usage of MPM prevents both the need of remeshing and the numerical instability induced by extensive mesh distortion. For validation with experimental results, we have constructed a testing chamber with one transparent sidewall. This chamber enables us to observe the injection process directly at the transparent vertical window and to measure the in-plane soil displacements and strains by means of the Digital Image Correlation (DIC) technique. The results already reveal the interrelation of soil and grout properties for a successful usage of this common ground improvement technique. T2 - 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018) CY - Madrid, Spain DA - 18.06.2018 KW - Offshore pile foundation KW - Compaction grouting KW - Material Point Method (MPM) KW - Mixed formulation KW - Digital Image Correlation (DIC) PY - 2018 SN - 978-0-7918-5130-2 SN - 2153-4772 VL - 9 SP - V009T10A013, 1 EP - 9 AN - OPUS4-46004 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Geißler, Heinz A1 - Yozgatli, Hakan-Peter A1 - Zschunke, Adolf T1 - Richtigkeit und Präzision FT-IR-spektroskopischer Transmissionsmessungen an Gläsern T2 - Kurzreferate / 75. Glastechnische Tagung T2 - 75. Glastechnische Tagung CY - Wernigerode, Deutschland DA - 2001-05-21 PY - 2001 PB - DGG, Deutsche Glastechnische Gesellschaft e.V. CY - Frankfurt/M. AN - OPUS4-1070 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dutto, Paola A1 - Baeßler, Matthias A1 - Geißler, Peter T1 - Suction bucket foundations for wind energy turbines: a numerical study with FEM T2 - Conference on ocean, offshore and arctic engineering N2 - Suction Bucket Jackets (SBJ) are found as a suitable alternative to driven piles for the support of jacket or tripod foundations for offshore wind energy converters. Offshore wind energy turbines are characterized by a small self weight and they can be subjected to different load combinations. The work presented here aims to show the numerical investigation on the behavior of suction bucket foundations under different kind of loads as well as load combinations. In order to do so, a suitable numerical model is much needed. The theoretical basis of the model lies on the Swansea formulation of Biots equations of dynamic poroelasticity combined with a constitutive model that reproduces key aspects of cyclic soil behavior in the frame of the theory of generalized plasticity. An adequate FE formulation, the representation of appropriate soil-structure interfaces and the computational efficiency are key aspects in order to successfully model such complex systems. The 3D numerical simulation allows a special insight into the fundamental behavior of the founding of Suction Bucket Jackets such as the evolution of the pore water pressure or the occurrence of the so called soil liquefaction. T2 - OMAE 2016 - 35th ASME International Conference on Ocean, Offshore and Arctic Engineering CY - Busan, South Korea DA - 20.06.2016 KW - Suction bucket jacket KW - Finite Element KW - Offshore geotechnics PY - 2016 SN - 978-0-7918-4992-7 VL - 1 SP - Article UNSP V001T10A004, 1 EP - 8 PB - ASME AN - OPUS4-36688 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dutto, Paola A1 - Baeßler, Matthias A1 - Geißler, Peter T1 - Suction buckets behaviour under tensile loads: A numerical study with FEM T2 - ISOPE 2017 N2 - Suction Bucket Jackets (SBJ) are found as a suitable alternative to driven piles for the support of foundations for offshore wind energy converters. In the case of jackets or multipods, a predominant vertical load is to be expected. The effect of such a tensile loading is the generation of suction in the soil inside the bucket which leads to an increment of tensile capacity. This paper aims to study the bearing behaviour of a suction foundation by taking into account how the soil permeability and the loading rate influence the foundation behaviour. Moreover, after submitting the structure to a storm load, the bearing capacity is studied again, in order to see the effect of such a load on the bucket's bearing behaviour. This study is carried out by means of Finite Element numerical simulations based on the formulation of Biot's equations combined with a constitutive model that reproduces the key aspects of cyclic soil behaviour in the frame of Generalized Plasticity. T2 - International Ocean and Polar Engineering Conference CY - San Francisco, USA DA - 25/06/2017 KW - Finite element method KW - Offshore wind energy converter KW - Suction bucket KW - Generalized plasticity KW - Sand KW - Numerical simulation KW - Tensile capacity PY - 2017 SN - 978-1-880653-97-5 SP - 485 AN - OPUS4-41051 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -