TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Autonomous exploration of new alloy chemistries using a Material Acceleration Platform (MAP) N2 - The discovery and commercialization of new corrosion resistant alloys by conventional approaches and manual experimentation is a slow and expensive process. In the last few years, efforts have been dedicated internationally to design self-driving-laboratories, also called Material Acceleration Platforms (MAPs). MAPs integrate material synthesis, characterization and testing modules into circular workflows through automation and use artificial intelligence (AI) for efficient and autonomous experiment design, property prediction and data analysis. We have established a MAP for corrosion research by automating diverse liquid operations, electrochemical testing and data evaluation, where the test results are interpreted via a machine learning (ML)-based backend. The workflows of the electrochemistry module are configured for electrodeposition of different alloys and subsequently performing electrochemical corrosion testing. The platform uses the results of the electrochemical tests to determine the next set of deposition parameters in a continuous and autonomous loop until the user-defined objectives are met. In this project we used the MAP to design new multi-principal element alloys (MPEAs) as corrosion resistant electrode materials for H2O and CO2 electrolysis. One campaign contains a maximum of 144 runs. From each successful campaign top five leads and another five randomly selected materials proceed to upscaling either by electrodeposition at larger scale or as bulk ingots cast by means of arc-melting. With these samples, a detailed chemical and electrochemical characterization using surface analysis techniques was performed to validate the success of the MAP-based optimization. The presentation will give an overview of the design and build phases of our MAP, its modules and workflows. Moreover, we will summarize our results from the FeNiCrCuCoMo MPEA system. T2 - EUROCORR 2024 CY - Paris, France DA - 01.09.2024 KW - MAPs@BAM KW - Corrosion KW - Electrodeposition KW - Material Acceleration Platform KW - Electrochemistry PY - 2024 AN - OPUS4-62635 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meinderink, D. A1 - Kielar, C. A1 - Sobol, Oded A1 - Ruhm, L. A1 - Rieker, F. A1 - Nolkemper, K. A1 - Orive, A. G. A1 - Özcan Sandikcioglu, Özlem A1 - Grundmeier, G. T1 - Effect of PAA-induced surface etching on the adhesion properties of ZnO nanostructured films N2 - Zinc oxide - polymer interfaces are known to exhibit interesting properties regarding molecular adhesion. This work is aimed at the investigation of the effect of the morphology and surface chemistry on the macroscopic adhesion of a model epoxy-based adhesive to nanorod (ZnO NR) and nanocrystalline (ZnO NC) ZnO-modified surfaces. Both ZnO films have been prepared using hydrothermal synthesis on hot-dip galvanized steel (HDG) surfaces by varying the precursor chemistry in order to control the film morphology. Poly (acrylic acid) (PAA) was used to improve the interfacial adhesion by modifying the morphology and surface chemistry of ZnO nanostructured films. The strong interaction of PAA from a dilute and neutral aqueous solution with the ZnO nanocrystallites was shown to significantly improve the interfacial adhesion by means of a nanoetching process. It was shown that the wet peel-forces correlate well with the considered morphology and surface chemistry. KW - Interfacial stability KW - Morphology control KW - Poly(acrylic acid) KW - Adhesion by mechanical interlocking KW - ZnO films KW - ZnO nanorods Nanocrystalline PY - 2021 DO - https://doi.org/10.1016/j.ijadhadh.2021.102812 SN - 0143-7496 VL - 106 SP - 102812 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-52600 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - MAPz@BAM Material Acceleration Plattform Zentrum @ BAM N2 - Die Material Acceleration Platform der BAM (MAPz@BAM) bündelt unsere Automatisierungs-Expertise auf dem Gebiet der Materialwissenschaft und -prüfung. Wir entwickeln modulare Experimentmodule, automatische Prüf- und Auswerteverfahren und setzen künstliche Intelligenz für eine effiziente und autonome Versuchsplanung, - vorhersage und Datenanalyse ein. T2 - Kick off Meeting / EnerMAC ZIM Network CY - Berlin, Germany DA - 07.12.2023 KW - Material Acceleration Platforms (MAPs) KW - Self-driving-labs (SDLs) KW - MAPz@BAM PY - 2023 AN - OPUS4-59411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - MAPz@BAM Material Acceleration Plattform Zentrum @ BAM N2 - Die Material Acceleration Platform der BAM (MAPz@BAM) bündelt unsere Automatisierungs-Expertise auf dem Gebiet der Materialwissenschaft und -prüfung. Wir entwickeln modulare Experimentmodule, automatische Prüf- und Auswerteverfahren und setzen künstliche Intelligenz für eine effiziente und autonome Versuchsplanung, - vorhersage und Datenanalyse ein. T2 - TechConnect Adlershof: Grand Solutions CY - Berlin, Germany DA - 06.11.2023 KW - Material Acceleration Platforms (MAPs) KW - Self-driving-labs (SDLs) KW - MAPz@BAM PY - 2023 AN - OPUS4-59412 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pohl, K. A1 - Özcan Sandikcioglu, Özlem A1 - Voigt, M. A1 - Grundmeier, G. T1 - Adhesion and corrosive delamination of epoxy films on chemically etched ZnMgAl-alloy coatings N2 - The effect of alkaline and acidic pretreatment steps on the surface chemical composition and adhesion properties of ZnMgAl-alloy coated steel was investigated by means of spectroscopic methods, scanning Kelvin probe (SKP) and peel test measurements.The spectroscopic results indicate that the surface film composition can be adjusted by the wet-chemical treatment. To study the corresponding surface adhesive properties, the samples were coated with an epoxy amine adhesive. Peel tests under humid conditions indicated an increased interaction between the acidic pre-treated surface and the adhesive. The results of the SKP analysis show that the acidic cleaned substrates have the highest resistance to delamination, which can be explained by the shift of the interfacial electrode potential. KW - Corrosion KW - ZnMgAl-alloy coatings KW - XPS KW - Scanning Kelvin probe PY - 2016 DO - https://doi.org/10.1002/maco.201608968 SN - 0947-5117 SN - 1521-4176 VL - 67 IS - 10 SP - 1020 EP - 1026 AN - OPUS4-38196 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - In situ imaging of corrosion processes N2 - The presentation summarizes our recent results on the coupled electrochemical methods for high resolution corrosion studies. The combination of Scanning Electrochemical Microscopy (SECM) and multielectrode (MMA) based real-time corrosion monitoring was presented as a new method for achieving high time resolution in local electrochemical analysis. Correlative imaging by means of Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) was demonstrated as a tool for the investigation of local corrosion processes initiated by the intermetallic particles (IMPs) on AA2024-T3 aluminium alloy. T2 - BAM-IfW Workshop CY - Dresden, Germany DA - 28.03.2019 KW - MIC KW - Atomic Force Microscopy (AFM) KW - Corrosion monitoring KW - Corrosion PY - 2019 AN - OPUS4-50291 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Changes in passive film chemistry of stainless steels in the presence of iron reducing bacteria N2 - Summary of the results obtained at DELTA-Beamline 8 in 2018. T2 - DELTA User Treffen CY - Dortmund, Germany DA - 28.11.2018 KW - MIC KW - Corrosion KW - XANES PY - 2018 AN - OPUS4-50312 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kastanias, Elaine A1 - Özcan Sandikcioglu, Özlem T1 - Chemical and electrochemical interaction mechanisms of metal-reducing bacteria with gold surfaces N2 - Bacterial biofilms are considered one of the salient contributing factors to the deterioration of metals and their alloys, occurring in virtually all environments and across various industrial systems. Considering the sheer magnitude of detrimental effects, it is of pertinent interest to elucidate the interaction mechanisms of sessile bacteria with metal and metal oxide surfaces to facilitate the development of efficient antifouling strategies. A common constituent of microbial communities within aquatic and sedimentary settings, the Shewanella genus consists of facultatively aerobic, Gram-negative bacterium which exhibit exceptional plasticity in respiratory capacities. During aerobic conditions, Shewanella utilizes oxygen as a terminal electron acceptor; conversely, under anaerobic conditions, it is able to undertake respiration by reducing alternative terminal electron acceptors such as oxidized metals via extracellular electron transfer mechanisms not yet thoroughly discerned. The aim of this work is to explicate the mechanisms governing the initial bacterial adhesion and subsequent biofilm formation on metallic surfaces. To investigate this dynamic interplay, a combined approach has been followed which couples surface enhanced Raman spectroscopy (SERS) with electrochemical techniques using Shewanella sp. model biofilms. Gold nano-islands deposited on thin glass slides have been chosen as inert model substrates with good uniformity and high surface enhancement factor. Furthermore, the utilization of gold as substrate material not only allowed the differentiation of the sole effect of substrate polarization on bacterial attachment but also enabled a precise adjustment of the surface chemistry and surface energy by means of surface functionalization with organothiol self-assembled monolayers. The results present the correlation of the primary settlement rate of bacteria on metallic substrates with the environmental parameters such as electrolyte composition and pH as well as surface-related properties like hydrophobicity/hydrophilicity and polarization. With the overall strategic goal of transferring this methodology to technical systems the results provide the fundamental basis for the bottom-up design of anti-fouling surfaces. T2 - Electrochemistry 2016 CY - Goslar, Germany DA - 26.09.2016 KW - Biofilms KW - Electrochemistry KW - Microbiology KW - Bacterial Extracellular Electron Transfer Mechanisms KW - Surface Enhanced Raman Spectroscopy KW - Spectroelectrochemical Techniques KW - Biocorrosion PY - 2016 AN - OPUS4-47249 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Combined electrochemical techniques for the investigation of corrosion processes N2 - Short presentation of BAM, a summary of the methods available in FB 6.2 and recent results on MIC and high resolution corrosion studies T2 - Institute Seminar: Jerzy Haber Institute of Catalysis and Surface Chemistry CY - Cracow, Poland DA - 07.11.2018 KW - MIC KW - Corrosion KW - Atomic Force Microscopy (AFM) KW - Combined corrosive and mechanical load PY - 2018 AN - OPUS4-50313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Untersuchung lokaler Korrosionsprozesse mittels kombinierter elektrochemischer und mikroskopischer Methoden N2 - Forschungsarbeiten des Fachbereichs auf dem Gebiet "Methoden für die Analyse der lokalen Korrosionsprozesse". T2 - ProcessNet-Arbeitsausschuss Elektrochemische Prozesse (AA ECP) CY - DECHEMA, Frankfurt am Main, Germany DA - 21.01.2019 KW - Scanning electrochemical microscope (SECM) KW - Atomic Force Microscopy (AFM) KW - Multielectrode based sensors PY - 2019 AN - OPUS4-49751 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Merino, E. A1 - Cere, S. A1 - Özcan Sandikcioglu, Özlem A1 - Dimper, Matthias A1 - Sobrados, I. A1 - Durán, A. A1 - Castro, Y. T1 - Influence of the BF3·O(C2H5)2 on the corrosion resistance of hybrid silica sol-gel coatings deposited on flash-PEO-treated Mg alloy N2 - Achieving highly cross-linked sol-gel coatings to provide effective corrosion protection of Mg alloys remains a challenging task. The aim of this work is to evaluate the effect boron trifluoride diethyl etherate (BF3·O(C2H5)2) as catalyst to epoxy group in a GPTMS/TEOS/SiO2 sol and assesses its effect on the structure and corrosion resistance properties of Flash-PEO coated pre-treated Mg alloy. 29Si MAS NMR and 13C CPMAS-NMR demonstrated that (BF3·O(C2H5)2) efficiently promotes the epoxy polymerization of the GPTMS and the formation of a hybrid silica network. However, the amount of (BF3·O(C2H5)2) should be optimized to minimize the formation of undesirable byproducts such as ethyl ether terminal units. Therefore, GPTMS/TEOS/SiO2 sols containing different amounts of (BF3·O(C2H5)2) were synthesized and deposited onto the Flash-PEO coated Mg alloy, leading to bilayer systems with a total thickness of ⁓8 μm. The corrosion behavior of the bilayer coatings in 3.5 wt% NaCl solution was evaluated by electrochemical impedance spectroscopy (EIS) and Scanning Kelvin probe microscope (SKPFM). The results revealed that the barrier properties of the coatings with enhanced cross-linked structure showed impedance modulus (│Z│f:0.1 Hz) approximately four orders of magnitude higher than the bare magnesium alloy and two orders of magnitude higher than the F-PEO coated sample. A suitable compromise between (BF3·O(C2H5)2) amount and sol-gel film structure is required to obtain a more durable barrier coating capable to extend the protective lifespan of the magnesium alloy. KW - Sol-gel KW - Corrosion KW - AZ31B Mg alloy KW - Chemical structure KW - SKPFM PY - 2026 DO - https://doi.org/10.1016/j.surfcoat.2025.133055 SN - 0257-8972 VL - 522 SP - 1 EP - 13 PB - Elsevier B.V. AN - OPUS4-65416 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Exploration of Fe-Ni-Cr-X systems using diffusion couples for new alloy chemistries with improved mechanical and corrosion properties N2 - Multi-principal element alloys (MPEAs) are disrupting methodologies in conventional alloy design, characterized by a singular dominant element dictating composition. The traditional optimization of the functional properties of alloys primarily relies on microalloying techniques. The advent of MPEAs has significantly broadened the chemical landscape available for exploration, approaching near-infinite possibilities. Consequently, innovative methodologies are imperative for discovering new alloys that exhibit properties customized for specific applications, simultaneously mitigating dependence on critical minerals. One promising approach for rapid screening of possible alloy chemistries and exploring the hitherto untouched regions of ternary, quaternary or higher order phase diagrams is the use of diffusion couples and multiples. The present study focusses on the exploration of quaternary multi-principle-element alloys (MPEAs) using diffusion multiples. We established diffusion systems by combining an equimolar ternary alloy (FeNiCr) with single diffusing elements Mn, Mo and Ta. Using ThermoCalc® and DICTRA® simulations, we determined suitable parameters (temperature and diffusion time) that would lead to the formation of single-phase alloys and diffusion lengths (>50 μm) that suit the application of high-resolution characterization methods. Microstructural and compositional characterization was performed via scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), electron probe microanalyzer (EPMA) and correlated to local mechanical properties evaluated by means of nanoindentation. Selected compositions from the diffusion couples were recast and homogenized to obtain bulk samples for the assessment of high-temperature and aqueous corrosion properties. Our results indicate that the ThermoCalc simulations have a good predictive power for crystallographic phases for Mn and Mo containing MPEAs derived from the diffusion couples. Moreover, our data on FeCrNi-Ta system provides valuable experimental input for respective databases necessary for simulation of phase diagrams. The presentation will summarize our methodology using diffusion couples as an efficient tool for exploring compositional spaces of MPEAs in the search for novel alloy chemistries and the results of our correlative study on the mechanical and corrosion properties of the selected quaternary systems. T2 - EUROCORR 2024 CY - Paris, France DA - 01.09.2024 KW - CCMat KW - Corrosion KW - Diffusion couples KW - Multi-principal element alloys PY - 2024 AN - OPUS4-62634 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Untersuchung lokaler Korrosionsprozesse mittels kombinierter elektrochemischer und mikroskopischer Methoden N2 - Aktuelle Forschungsergebnisse - Korrosionseigenschaften von AA 2024-T3 und AM-316 unter gekoppelter korrosiv/mechanischer Beanspruchung. T2 - MPIE Düsseldorf, Sitzung der GfKORR Arbeitskreise Grundlagen und Simulation und Korrosionsuntersuchung und überwachung CY - Dusseldorf, Germany DA - 20.11.2019 KW - Corrosion KW - Atomic Force Microscopy (AFM) KW - Coupled corrosive/mechanical load PY - 2019 AN - OPUS4-50296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Nanotechnology at BAM N2 - The presentation gives a brief summary of the research activities of BAM in the field of nanotechnology. It was held at INERIS in the frame of a delegation meeting to identify topics for future collaborations. T2 - Kooperationstreffen mit INERIS CY - Verneuil-en-Halatte, France DA - 23.10.2017 KW - Nanotechnology KW - Nano Referenzmaterialien KW - Nanosafety PY - 2017 AN - OPUS4-43408 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Spektroelektrochemische Analyse der Korrosionsprozesse von eisenreduzierenden Mikroorganismen N2 - Der Vortrag ist eine Zusammenfassung der Forschungsaktivitäten im FB 6.2 im Rahmen des Themenfeldprojekts MIC (TF-Material). T2 - DECHEMA/GfKORR-Fachgruppe "Mikrobielle Materialzerstörung und Materialschutz" CY - Berlin, Germany DA - 04.10.2017 KW - Korrosion KW - Mikrobiell induzierte Korrosion (MIC) KW - Lokale Elektrochemie KW - Spektroelektrochemie KW - Oberflächenverstärkte Raman Spektroskopie (SERS) KW - XANES PY - 2017 AN - OPUS4-43462 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Material acceleration platforms (MAPs) - Global activities and developments at BAM N2 - Die Material Acceleration Platform der BAM (MAPz@BAM) bündelt unsere Automatisierungs-Expertise auf dem Gebiet der Materialwissenschaft und -prüfung. Wir entwickeln modulare Experimentmodule, automatische Prüf- und Auswerteverfahren und setzen künstliche Intelligenz für eine effiziente und autonome Versuchsplanung, - vorhersage und Datenanalyse ein. T2 - WPFM Expert Group on Structural Materials (EGSM) CY - Online meeting DA - 23.05.2023 KW - Material Acceleration Platforms (MAPs) KW - MAPz@BAM KW - Self-driving-labs PY - 2023 AN - OPUS4-59409 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pérez Blanes, H. A1 - Ghiasi, Pouria A1 - Sandkühler, J. A1 - Yesilcicek, Yasemin A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Prinz, Carsten A1 - Al-Sabbagh, Dominik A1 - Thünemann, Andreas A1 - Özcan Sandikcioglu, Özlem A1 - Witt, Julia T1 - High CO2 reduction activity on AlCrCoCuFeNi multi-principal element alloy nanoparticle electrocatalysts prepared by means of pulsed laser ablation N2 - Noble metal-free nanoparticles (NPs) based on multi-principal element alloys (MPEAs) were synthesized using a one-step pulsed laser ablation in liquids (PLALs) method for the electrochemical reduction of CO2. Laser ablation was performed in pure water or poly-(diallyldimethylammonium chloride) (PDADMAC)-containing an aqueous solution of Al8Cr17Co17Cu8Fe17Ni33 MPEA targets. Transmission electron microscopy (TEM) measurements combined with energy dispersive X-ray (EDX) mapping were used to characterize the structure and composition of the laser-generated MPEA nanoparticles (MPEA-NPs). These results confirmed the presence of a characteristic elemental distribution of a core-shell phase structure as the predominant NP species. The electrocatalytic performance of the laser-generated MPEA-NPs was characterized by linear sweep voltammetry (LSV) demonstrating an enhanced electrocatalytic CO2 activity for PDADMAC-stabilized NPs. The findings of these investigations indicate that MPEAs have great potential to replace conventional, expensive noble metal electrocatalysts. KW - Metals and Alloys KW - Surfaces KW - Biomaterials KW - Ceramics and Composites KW - Coatings and Films PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-588218 DO - https://doi.org/10.1016/j.jmrt.2023.05.143 SN - 2238-7854 VL - 24 SP - 9434 EP - 9440 PB - Elsevier B.V. AN - OPUS4-58821 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pérez Blanes, H. A1 - Ghiasi, P. A1 - Sandkühler, J. A1 - Yesilcicek, Yasemin A1 - Pentzien, Simone A1 - Conradi, Andrea A1 - Prinz, Carsten A1 - Al-Sabbagh, Dominik A1 - Thünemann, Andreas A1 - Özcan Sandikcioglu, Özlem A1 - Witt, Julia T1 - High CO2 reduction activity on AlCrCoCuFeNi multi-principal element alloy nanoparticle electrocatalysts prepared by means of pulsed laser ablation N2 - Noble metal-free nanoparticles (NPs) based on multi-principal element alloys (MPEAs) were synthesized using a one-step pulsed laser ablation in liquids (PLALs) method for the electrochemical reduction of CO2. Laser ablation was performed in pure water or poly-(diallyldimethylammonium chloride) (PDADMAC)-containing an aqueous solution of Al8Cr17Co17Cu8Fe17Ni33 MPEA targets. Transmission electron microscopy (TEM) measurements combined with energy dispersive X-ray (EDX) mapping were used to characterize the structure and composition of the laser-generated MPEA nanoparticles (MPEA-NPs). These results confirmed the presence of a characteristic elemental distribution of a core-shell phase structure as the predominant NP species. The electrocatalytic performance of the laser-generated MPEA-NPs was characterized by linear sweep voltammetry (LSV) demonstrating an enhanced electrocatalytic CO2 activity for PDADMAC-stabilized NPs. The findings of these investigations indicate that MPEAs have great potential to replace conventional, expensive noble metal electrocatalysts. KW - Multi-principal element alloys KW - Chemically Complex Materials KW - CCMat KW - Electrocatalysis KW - Carbon dioxide reduction KW - Pulsed laser ablation PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594018 DO - https://doi.org/10.1016/j.jmrt.2023.05.143 VL - 24 SP - 9434 EP - 9440 PB - Elsevier BV AN - OPUS4-59401 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Chemical and electrochemical interaction mechanisms of metal-reducing bacteria with gold surfaces N2 - Bacterial biofilms are considered one of the salient contributing factors to the deterioration of metals and their alloys, occurring in virtually all environments and across various industrial systems. Considering the sheer magnitude of detrimental effects, it is of pertinent interest to elucidate the interaction mechanisms of sessile bacteria with metal and metal oxide surfaces to facilitate the development of efficient antifouling strategies. A common constituent of microbial communities within aquatic and sedimentary settings, the Shewanella genus consists of facultatively aerobic, Gram-negative bacterium which exhibit exceptional plasticity in respiratory capacities. During aerobic conditions, Shewanella utilizes oxygen as a terminal electron acceptor; conversely, under anaerobic conditions, it is able to undertake respiration by reducing alternative terminal electron acceptors such as oxidized metals via extracellular electron transfer mechanisms not yet thoroughly discerned. The aim of this work is to explicate the mechanisms governing the initial bacterial adhesion and subsequent biofilm formation on metallic surfaces. To investigate this dynamic interplay, a combined approach has been followed which couples surface enhanced Raman spectroscopy (SERS) with electrochemical techniques using Shewanella sp. model biofilms. Gold nano-islands deposited on thin glass slides have been chosen as inert model substrates with good uniformity and high surface enhancement factor. Furthermore, the utilization of gold as substrate material not only allowed the differentiation of the sole effect of substrate polarization on bacterial attachment but also enabled a precise adjustment of the surface chemistry and surface energy by means of surface functionalization with organothiol self-assembled monolayers. The results present the correlation of the primary settlement rate of bacteria on metallic substrates with the environmental parameters such as electrolyte composition and pH as well as surface-related properties like hydrophobicity/hydrophilicity and polarization. With the overall strategic goal of transferring this methodology to technical systems the results provide the fundamental basis for the bottom-up design of anti-fouling surfaces. T2 - Electrochemistry 2016 CY - Göslar, Germany DA - 26.09.2016 KW - Biofilms KW - Electrochemistry KW - Biocorrosion KW - Surface enhanced Raman Spectroscopy KW - Bacteria KW - Microbiological induced corrosion KW - Microbiology PY - 2016 AN - OPUS4-47246 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Özcan Sandikcioglu, Özlem T1 - Effekt der Vorkonditionierung und Umweltparameter auf die Anheftung und Biofilmbildung N2 - Aktuelle Ergebnisse des Fachbereiches auf dem Gebiet MIC. T2 - Treffen der GfKORR/DECHEMA Fachgruppe MikroMatz CY - Berlin, Germany DA - 09.04.2019 KW - MIC KW - Korrosion KW - Korrosionsüberwachung KW - Biofilmbildung PY - 2019 AN - OPUS4-50292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gerrits, Ruben A1 - Stepec, Biwen An A1 - Bäßler, Ralph A1 - Becker, Roland A1 - Dimper, Matthias A1 - Feldmann, Ines A1 - Goff, Kira L. A1 - Günster, Jens A1 - Hofmann, Andrea A1 - Hesse, René A1 - Kirstein, Sarah A1 - Klein, Ulrich A1 - Mauch, Tatjana A1 - Neumann-Schaal, Meina A1 - Özcan Sandikcioglu, Özlem A1 - Taylor, Nicole M. A1 - Schumacher, Julia A1 - Shen, Yin A1 - Strehlau, Heike A1 - Weise, Matthias A1 - Wolf, Jacqueline A1 - Yurkov, Andrey A1 - Gieg, Lisa M. A1 - Gorbushina, Anna T1 - A 30-year-old diesel tank: Fungal-dominated biofilms cause local corrosion of galvanised steel N2 - The increased use of biodiesel is expected to lead to more microbial corrosion, fouling and fuel degradation issues. In this context, we have analysed the metal, fuel and microbiology of a fouled diesel tank which had been in service for over 30 years. The fuel itself, a B7 biodiesel blend, was not degraded, and—although no free water phase was visible—contained a water content of ~60 ppm. The microbial community was dominated by the fungus Amorphotheca resinae, which formed thick, patchy biofilms on the tank bottom and walls. The tank sheets, composed of galvanised carbon steel, were locally corroded underneath the biofilms, up to a depth of a third of the sheet thickness. On the biofilm-free surfaces, Zn coatings could still be observed. Taken together, A. resinae was shown to thrive in these water-poor conditions, likely enhancing corrosion through the removal of the protective Zn coatings. KW - Fungal biofilms KW - Biodiesel degradation mechanisms PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-655014 DO - https://doi.org/10.1038/s41529-025-00731-2 SN - 2397-2106 VL - 10 IS - 1 SP - 1 EP - 14 PB - Springer Science and Business Media LLC AN - OPUS4-65501 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wurzler, Nina A1 - Schutter, Jan David A1 - Wagner, R. A1 - Dimper, Matthias A1 - Lützenkirchen-Hecht, D. A1 - Özcan Sandikcioglu, Özlem T1 - Abundance of Fe(III) during cultivation affects the microbiologically influenced corrosion (MIC) behaviour of iron reducing bacteria Shewanella putrefaciens N2 - The effect of the presence of Fe(III) during the cultivation on the electrochemical activity and corrosion behaviour of dissimilatory iron reducing bacteria Shewanella putrefaciens was studied by means of ex situ and in situ X-ray absorption near-edge spectroscopy (XANES). Stainless steel AISI 304 and thin iron films were studied as substrates. XANES analysis indicated an accelerated iron dissolution and growth of an oxide/hydroxide film for the culture grown with Fe(III) in comparison to the culture grown in absence of Fe(III). Electrochemical Analysis indicated that the biofilm resulted in acceleration of the general corrosion but provides protection against local corrosion. KW - Stainless Steel KW - XANES KW - Iron KW - Cyclic Voltammetry KW - Microbiological Corrosion PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-513788 DO - https://doi.org/10.1016/j.corsci.2020.108855 VL - 174 SP - 108855 PB - Elsevier Ltd. AN - OPUS4-51378 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wurzler, Nina A1 - Schütter, Jan David A1 - Wagner, R. A1 - Dimper, Matthias A1 - Hodoroaba, Vasile-Dan A1 - Lützenkirchen-Hecht, D. A1 - Özcan Sandikcioglu, Özlem T1 - Preconditioning of AISI 304 stainless steel surfaces in the presence of flavins—Part II: Effect on biofilm formation and microbially influenced corrosion processes N2 - Biofilm formation and microbially influenced corrosion of the iron-reducing microorganism Shewanella putrefaciens were investigated on stainless steel surfaces preconditioned in the absence and presence of flavin molecules by means of XANES (X-ray absorption near-edge structure) analysis and electrochemical methods. The results indicate that biofilm formation was promoted on samples preconditioned in electrolytes containing minute amounts of flavins. On the basis of the XANES results, the corrosion processes are controlled by the iron-rich outer layer of the passive film. Biofilm formation resulted in a cathodic shift of the open circuit potential and a protective effect in terms of pitting corrosion. The samples preconditioned in the absence of flavins have shown delayed pitting and the samples preconditioned in the presence of flavins did not show any pitting in a window of −0.3- to +0.0-V overpotential in the bacterial medium. The results indicate that changes in the passive film chemistry induced by the presence of minute amounts of flavins during a mild anodic polarization can change the susceptibility of stainless steel surfaces to microbially influenced corrosion. KW - Biofilms KW - XANES KW - Microbially influenced corrosion (MIC) PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-528130 DO - https://doi.org/10.1002/maco.202012192 VL - 72 IS - 6 SP - 983 EP - 994 PB - Wiley AN - OPUS4-52813 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -