TY - JOUR A1 - Nandish, Ranjith A1 - Knaust, Christian A1 - Zehfuß, J. T1 - Numerical investigations of a large fire exposure crib test - presenting different pyrolysis modelling methodologies and numerical results N2 - The need for numerical-based approaches to investigate the fire behaviour in buildings with combustible components is growing due to the increasing use of timber by the construction industry in order to meet the "Climate Action Plan 2050". This requires consideration of the complex kinetic processes that take place during the burning of the wood in the numerical models. This is accomplished by using computational fluid dynamics (CFD) to numerically model the material pyrolysis and combustion processes. This paper presents three different approaches for simulating the behaviour of a wood crib fire using the Fire Dynamics Simulator (FDS). These approaches are based on either prescribing the burning rate of the wood directly from the physical experiments or using the kinetic parameters to govern the underlying processes, such as pyrolysis. Wooden crib fire experiments carried out by the RISE research institute in Sweden inside the combustion chamber were used to validate all the methods. The numerical results from the method, which utilized the experimentally determined burning rate, were in good agreement with the experimental results, with a maximum deviation of 6% in the case of HRR. On the other hand, the model that needs kinetic parameters as its input has shown maximum discrepancies of 12% and 33% compared to experimental results. These methods are sensitive to the input parameters and the extent of dependency needs to be investigated. KW - Wooden buildings KW - Ppyrolysis KW - Wood combustion KW - Wood fire loads PY - 2024 SN - 1099-1018 SP - 1 EP - 25 PB - John Wiley & Sons Ltd. AN - OPUS4-62253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nandish, Ranjith A1 - Knaust, Christian A1 - Zehfuß, Jochen T1 - Numerical Investigations of a Large Fire Exposure Crib Test—Presenting Different Pyrolysis Modelling Methodologies and Numerical Results N2 - ABSTRACTThe need for numerical‐based approaches to investigate the fire behaviour in buildings with combustible components is growing due to the increasing use of timber by the construction industry to meet the ‘Climate Action Plan 2050’. This requires consideration of the complex kinetic processes that take place during the burning of the wood in the numerical models. This is accomplished by using computational fluid dynamics (CFD) to numerically model the material pyrolysis and combustion processes. This article presents three different approaches for simulating the behaviour of a wood crib fire using the fire dynamics simulator (FDS). These approaches are based on either prescribing the burning rate of the wood directly from the physical experiments or using the kinetic parameters to govern the underlying processes, such as pyrolysis. Wooden crib fire experiments carried out by the RISE Research Institute in Sweden inside the combustion chamber that were used to validate all the methods. The numerical results from the method, that utilised the experimentally determined burning rate, were in good agreement with the experimental results, with a maximum deviation of 6% in the case of HRR. On the other hand, the model that needs kinetic parameters as its input has shown maximum discrepancies of 12% and 33% compared to experimental results. These methods are sensitive to the input parameters and the extent of dependency needs further investigation. KW - Pyrolysis KW - Wood combustion KW - Wood fire loads KW - Wooden buildings PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-626567 DO - https://doi.org/10.1002/fam.3287 SN - 1099-1018 VL - 49 IS - 4 SP - 371 EP - 387 PB - John Wiley & Sons Ltd. AN - OPUS4-62656 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nandish, Ranjith A1 - Knaust, Christian A1 - Hofmann-Böllinghaus, Anja A1 - Gnutzmann, Tanja A1 - Zehfuß, Jochen T1 - Simulation of wood pyrolysis with component-based mechanism N2 - This paper presents a comprehensive fire simulation study that models the pyrolysis process of beech wood using kinetic parameters with the Fire Dynamics Simulator (FDS). The kinetic methodology is based on the application of these kinetic parameters to govern the underlying pyrolysis reactions. The primary objective was to numerically model the pyrolysis process for beech wood using both single-component (single-step, single reaction scheme) and multi-component (single-step, multi-reaction scheme) kinetic reaction schemes. The accuracy of the numerical model was validated by comparing FDS simulation results with experimental data obtained from thermogravimetric analysis (TGA) and cone calorimeter tests. This approach aids in identifying reliable kinetic reaction input parameters for modelling wood fires. A case study was included to demonstrate the implementation of the kinetic reaction schemes. Numerical results from the TGA simulations for the small-scale pure cellulose test using the single-component approach exhibit consistency with the experimental data. Furthermore, the results demonstrated that the multi-component approach more accurately replicates the shape of the experimental curve for beech wood compared to the single-component approach. However, discrepancies in the tail regions of the curves obtained from the FDS simulations showed the need for further improvement in the modelling approach, particularly regarding the exclusion of char oxidation reactions, which needs to be investigated further. KW - Simulation KW - Wood PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-639272 DO - https://doi.org/10.1007/s00231-025-03571-7 SN - 0947-7411 VL - 61 IS - 6 SP - 1 EP - 14 PB - Springer Science and Business Media LLC AN - OPUS4-63927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -