TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Dalles de verre - damage mechanisms, maintenance techniques and mortars for restoration N2 - The present article gives an insight into the research project BEGLARES. Main topics are the restoration “Dalles de Verre” Windows and the development of repair mortars and techniques. This project is executed in cooperation between Glasmalerei Peters GmbH, the University of York, and the BAM Federal Institute for Materials Research and Testing. It is funded by the Federal Ministry of Economics and Technology. The main mechanism of damage, Standards for protection and repair of concrete structures, and the development of repair mortar and special test specimens are presented. T2 - EWCHP-2011 - European workshop on cultural heritage preservation CY - Berlin, Germany DA - 26.09.2011 KW - Dalles de verre KW - Carbonation KW - Maintenance planning KW - Current state analysis KW - Repair techniques PY - 2011 SN - 978-3-8167-8560-6 SP - 289 EP - 293 AN - OPUS4-24560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Modular Repair Mortars for Natural Stone in Cultural Heritage T2 - International Conference on Advances in Cement and Concrete Technology in Africa, 28.01.2013 - 30.01.2013 CY - Johannesburg, South Africa DA - 2013-01-28 PY - 2013 AN - OPUS4-27672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Repair and Restoration of "Dalle de Verre" Concrete Windows T2 - ICCRRR 2012 - 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 2012-09-03 PY - 2012 AN - OPUS4-27673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Viefhues, Eva A1 - Ünal, Murat A1 - Hüsken, Götz A1 - Wellershoff, F. A1 - Mehdianpour, Milad T1 - Zementgebundenes Crashmaterial für Schutzbauteile in explosionsbeanspruchten Fassaden N2 - Die Forderung, für repräsentative Bauwerke wie Botschaften und Flughäfen auch außergewöhnliche Lasten aus Explosion zu berücksichtigen, wurde in jüngerer Vergangenheit zunehmend gestellt. Das aufgrund dieser Lasten zu erwartende Schadensausmaß kann durch den Einsatz von energiedissipierenden Schutzbauteilen in der Fassadenbefestigung begrenzt werden. Die Dissipation der Explosionsenergie in den Schutzbauteilen kann beispielsweise über ein Crashmaterial erfolgen. In diesem Aufsatz werden Untersuchungen an zementgebundenen Materialien, die diesem Zweck dienen sollen, vorgestellt. Der Einfluss unterschiedlicher Zusätze auf die für ein Crashmaterial maßgebenden Eigenschaften wird in einer Parameterstudie untersucht. Als besonders geeignet wird ein Material identifiziert, bei dem die Zugabe eines Gasbildners das Matrixgefüge im Hinblick auf das gewünschte Kraft-Verformungs-Verhalten positiv verändert. Dynamische Versuche mit diesem Material geben Aufschluss über dessen Komprimierungsverhalten bei hohen Stauchraten.----------------------------------------------------------------------------------------------------------------------------------------------- In the past few years public awareness of the need to protect structures against blast effects has risen. Energy dissipating protective components placed at the façade connectors allow protecting people in the building as well as the primary building structure from damage due to blast loads. One possibility to dissipate the blast energy is using protective components with crash material. This paper presents tests on cementitious crash materials studying the effect of different additives to the compression-behavior of the material. Additional experiments enable analyzing the material behavior under static and dynamic test conditions. KW - Explosionsbeanspruchung KW - Energiedissipation KW - Fassadenverankerung KW - Materialkennlinie KW - Crashmaterial KW - Crashkörper KW - Energy dissipation KW - Façade connector KW - Material behavior KW - Crash-material KW - Entwurf und Konstruktion KW - Baustoffe KW - Building materials KW - Conception and design KW - Blast loads PY - 2014 DO - https://doi.org/10.1002/bate.201400041 SN - 0932-8351 SN - 1437-0999 SN - 0005-6820 SN - 0341-1052 SN - 0932-6359 VL - 91 IS - 8 SP - 567 EP - 571 PB - Ernst & Sohn CY - Berlin AN - OPUS4-31343 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Development of a polymer-modified repair mortar for fair-faced lightweight concrete of a historical building T2 - International Conference on Sustainable Building Restoration and Revitalisation CY - Shanghai, China DA - 2013-09-25 PY - 2013 AN - OPUS4-30365 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Barthel, Maria T1 - Fördermöglichkeiten und Zusammenarbeit zwischen Industrie und Forschung - Pflastersteinprojekte an der BAM T2 - Entwicklungen und Trends im Betonwarenmarkt sowie Aktuelles zum technischen Stand CY - Feuchtwangen DA - 2014-12-04 PY - 2014 AN - OPUS4-32335 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Betonkorrosion und Betoninstandsetzung vor dem Hintergrund der DIN EN 1504 T2 - Bauen im Bestand CY - Hamburg/Seevetal DA - 2014-11-27 PY - 2014 AN - OPUS4-32425 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Betonkorrosion und Betoninstandsetzung vor dem Hintergrund der DIN EN 1504 T2 - Bauen im Bestand CY - Hannover DA - 2014-11-18 PY - 2014 AN - OPUS4-32426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Development of a polymer-modified lightweight mortar for the repair of exposed concrete facades on historic buildings T2 - XVII. ERMCO Congress 2015 European Ready Mixed Concrete Organization CY - Istanbul, Türkei DA - 2015-06-04 PY - 2015 AN - OPUS4-33558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Hüsken, Götz A1 - Kühne, Hans-Carsten T1 - Development of a polymer-modified lightweight mortar for the repair of exposed concrete facades on historic buildings N2 - Reinforced concrete buildings are frequently damaged by cracks, spalling and corroded reinforcement bars. The present article focuses on the damage analysis of one of the first buildings in Berlin that was constructed using reinforced lightweight concrete, which makes it historically important. The compressive strength, carbonation depth, location and diameter of reinforcement bars as well as moisture and salt profiles were determined. The carbonationinduced corrosion of the reinforcement bars represented the main damage of the building. Certified repair mortars with lightweight aggregates (LWA) do not exist on the German market. Therefore, an appropriate repair mortar was developed in accordance with DIN EN 1504 and the German guideline for the repair and protection of concrete structures (RL-SIB). On the one hand, historic preservation requirements, such as: colour of the mortar, possibilities of surface patterning, maximum preservation of the original substance and reversibility of any Intervention must be met. On the other hand, technical requirements of the relevant Standards must be achieved. The developed mix was designed to resist the identified causes of deterioration. Thermal strains within the repair mortar and between the repair mortar and the Substrate influence the crack formation and thus the durability. Therefore, special attention was paid to the bonding and shrinking behaviour of the concrete repair System. By using polymers, both hardened mortar properties and durability were influenced positively. T2 - XVII. ERMCO congress CY - Istanbul, Turkey DA - 2015-06-04 KW - Lightweight concrete KW - Repair mortar KW - Historic building KW - Architectural use KW - Polymers KW - Shrinkage PY - 2015 SN - 978-605-84253-0-9 SP - 306 EP - 314 AN - OPUS4-33607 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Entwicklung eines PCC-Leichtmörtels zur Instandsetzung einer denkmalgeschützten Sichtbetonfassade T2 - 19. Internationale Baustofftagung (ibausil) CY - Weimar DA - 2015-09-16 PY - 2015 AN - OPUS4-34496 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Hüsken, Götz A1 - Kühne, Hans-Carsten ED - Ludwig, H.-M. T1 - Entwicklung eines PCC-Leichtmörtels zur Instandsetzung einer denkmalgeschützten Sichtbetonfassade N2 - Der Schutz und Erhalt der Originalsubstanz stehen im Mittelpunkt jeglicher denkmalpflegerischer Instandhaltungsmaßnahmen. Das äußere Erscheinungsbild spielt hierbei - im Gegensatz zur klassischen Betoninstandsetzung - eine größere Rolle. Nichtsdestotrotz dürfen die technischen Belange auch hier nicht außer Acht gelassen werden. Die Ermittlung des Ist- und Sollzustands stellt die Grundlage einer dauerhaften Instandsetzung dar. Der vorliegende Beitrag zeigt Schäden und Schadensursachen an einem denkmalgeschützten Gebäude in Leichtbetonbauweise auf. Das Bauwerk wurde hinsichtlich seines Schädigungsgrads, -umfangs und der maßgeblichen Schadensursachen untersucht. Im Rahmen dieser Untersuchungen wurden gehäuft Risse, Abplatzungen und Bewehrungskorrosion festgestellt. Die durch eine Brettschalung strukturierte Sichtbetonfassade soll im Zuge der Instandsetzungsmaßnahme möglichst originalgetreu wiederhergestellt werden. Bei der Auswahl von geeigneten Instandsetzungsmethoden und -produkten konnte aufgrund fehlender Normen und Richtlinien für die Instandsetzung von denkmalgeschützten Leichtbetonbauten nicht auf bereits existierende Produkte und Methoden zurückgegriffen werden. Daher wurde in Anlehnung an die Richtlinie "Schutz und Instandsetzung von Betonbauteilen" (RL SIB) des DAfStB eine polymermodifizierte Betonergänzungsmasse mit leichter Gesteinskörnung entwickelt. Ausgehend von der Hauptschadensursache, der karbonatisierungsinduzierten Bewehrungskorrosion, wurden erforderliche Eigenschaften der Betonergänzungsmasse in enger Absprache mit der zuständigen Denkmalschutzbehörde und dem involvierten Fachplaner abgestimmt. Neben den grundlegenden mechanischen Eigenschaften spielen in diesem Anwendungsfall spezielle Eigenschaften wie z.B. farbliehe Anpassung der Betonergänzungsmasse, Möglichkeit der Oberflächenstrukturierung, Zeitfenster der Verarbeitbarkeit sowie die Modellierbarkeit eine wichtige Rolle. Der entwickelte PCC-Leichtmörtel berücksichtigt dabei auch den Einfluss einer geringen Schwind- und Quellneigung der Betonergänzungsmasse um Delaminierung infolge unterschiedlicher Längenänderungen zu vermeiden und somit eine dauerhafte Instandsetzung zu gewährleisten. Weiterhin wurde das Verbundverhalten des entwickelten PCCL Leichtmörtels für unterschiedliche Schichtaufbauten untersucht. T2 - 19. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 16.09.2015 KW - Concrete-glazing KW - Dalles de verres KW - Cathodic corrosion protection KW - Heritage KW - Restoration KW - Maintenance PY - 2015 SN - 978-3-00-050225-5 VL - 2 SP - 30-04, 2-125 - 2-132 AN - OPUS4-34876 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Restaurierung von Betonverglasungen: Instandsetzungstechniken und -mörtel T2 - 52. DAfStb-Forschungskolloquium, BAM CY - Berlin, Germany DA - 2011-11-07 PY - 2011 AN - OPUS4-25249 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kleine, M. T1 - Entwicklung von Betonergänzungsmassen und Instandsetzungsprinzipien zur Restaurierung von Betonglasfenstern des 20. Jahrhunderts T2 - Stained Glass After 1920: Technology and Conservation Forum for the Conservation of Stained-Glass Windows CY - Lisbon, Portugal DA - 2011-09-26 PY - 2011 AN - OPUS4-24732 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Entwicklung von Betonergänzungsmassen und Probekörpern zur Instandsetzung von Betonglasfenstern - Projektergebnisse Beglares - T2 - Kolloquium Betonglasrestaurierung CY - Paderborn, Germany DA - 2011-10-10 PY - 2011 AN - OPUS4-24797 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Untersuchungen zur Schadenssituation an Betonglasfenstern und Entwicklung von Betonersatzsystem zur Instandsetzung T2 - 18. Internationale Baustofftagung (IBAUSIL) CY - Weimar, Germany DA - 2012-09-12 PY - 2012 AN - OPUS4-26557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Restoration of Dalles de Verre Concrete Glass Windows with Polymer Modified Repair Mortatrs T2 - ASPIC 2012, 7th Asian Symposium on Polymers in Concrete CY - Istanbul, Turkey DA - 2012-10-03 PY - 2012 AN - OPUS4-26675 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Ramge, Peter A1 - Kühne, Hans-Carsten T1 - Restoration of dalles de verre concrete glass windows with polymer modified repair mortars N2 - On concrete glazings done in the so called ‘Dalles de Verre’ technique, damages occur frequently in form of cracks, Chips and corroded reinforcement Steel. These glazings, mostly dating back to the 20* Century, are often of art-historical importance. This article focuses on the analysis of occurring damages and their causes and on the development of special repair mortars and repair concepts for these glazings, which were done in a recent research project. On several reference buildings compressive strength, reinforcement location and diameter, carbonation depth as well as moisture and salt profiles were determined exemplarily. At the time of the concrete glass Windows’ construction generally no sufficient care was taken for an adequate concrete covering of the reinforcement. Carbonation-induced reinforcement corrosion is therefore the main cause of the occurring damage. Standards dealing specifically with the repair of Dalles de Verre do not exist. Therefore the polymer modified repair mortar was development according to the German guideline “Protection and Repair of Concrete Structures” (RL SIB, 2001). However due to the unique boundary conditions ofthe Dalles de Verre glazings, thespecifications of this guideline alone are not sufficient, they need to be altered and amended. In the article the individual requirements on repair mortars for different application tasks are described. Furthermore, the development of the mortars’ formulations and of a test specimen for performance tests under realistic conditions is shown. T2 - ASPIC 2012 - 7th Asian symposium on polymers in concrete CY - Istanbul, Turkey DA - 03.10.2012 KW - Rehabilitation of concrete structures KW - Polymer modified repair mortar KW - Special test specimens KW - Durability KW - Carbonation KW - Cultural heritage PY - 2012 SN - 978-975-561-427-4 SP - 397 EP - 404 AN - OPUS4-26774 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten A1 - Ramge, Peter T1 - Untersuchungen zur Schadenssituation an Betonglasfenstern und Entwicklung von Betonersatzsystemen zur Instandsetzung N2 - In den 50er Jahren des 20. Jahrhunderts entwickelten sich auch aufgrund kriegsbedingter Zerstörung von zahlreichen Gebäuden neue, experimentelle Formen in Kunst und Architektur. Insbesondere im Kirchenbau wurde besonderer Wert auf die Färb- und Lichtwirkung im Innenraum gelegt. In dieser künstlerischen Bewegung setzte sich auch aus Kostengründen die Idee der Betonverglasungen durch. Diese bestehen vorwiegend aus in Form gegossenen, geschlagenen oder geschnittenen Dickglasstücken, den sogenannten Dalles de Verre. Die Verbindung der einzelnen Elemente erfolgt nicht wie bei traditionellen Kirchenfenstern durch Bleiruten sondern durch Stahlbetoneinfassungen. Unterschieden werden dabei Betonverglasungen in Betonglasgusstechnik und in Formsteintechnik sowie Mischformen beider Techniken. Bedingt durch die Gestaltung der Betonverglasungen entstanden filigrane Bauteile mit geringen Betonüberdeckungen der Bewehrung. An diesen kunsthistorisch bedeutsamen Betonverglasungen treten daher gehäuft Schäden in Form von Rissen, Abplatzungen und korrodierter Bewehrung auf. Im Rahmen eines Forschungsvorhabens beschäftigte sich die BAM Bundesanstalt für Materialforschung und -prüfung mit der Analyse aktueller Schäden und Schadensursachen sowie der Entwicklung von geeigneten Instandsetzungskonzepten. Unter Beachtung sowohl technischer als auch kunsthistorischer Gesichtspunkte wurden Referenzobjekte zu genaueren Untersuchungen ausgewählt. Nach Rücksprache mit den zuständigen Denkmalschutzbehörden und Kirchengemeinden erfolgte eine Dokumentation der Bauwerks- und Schadenssituation der ausgewählten Referenzobjekte in Deutschland und dem europäischen Ausland. T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 12.09.2012 PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 904 EP - 911 AN - OPUS4-26668 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat A1 - Kühne, Hans-Carsten ED - Alexander, M. G. ED - Beushausen, H.-D. ED - Dehn, F. ED - Moyo, P. T1 - Repair and restoration of 'Dalle de Verre' concrete windows N2 - On historically important concrete glazing damages occur frequently in form of cracks, chipping and corroded reinforcement. The present article focuses on the analysis of current damages and causes for damage and the development of repair concepts. The observation of compressive strength, carbonation depth, reinforcement layer and diameter as well as moisture and salt content profiles were determined on several reference objects. The carbonation-induced corrosion of the reinforcement was determined as the main cause of the present damage. The frequent occurrence of carbonation-induced corrosion is well-founded by the low concrete cover of the reinforcement. It is caused by the specific manufacturing process in the production of concrete-glass windows. Standards dealing especially with the repair of concrete glazing do not exist. Therefore appropriate repair and maintenance techniques in accordance with DIN EN 1504 and German guidelines for repair and protection of concrete (RL SIB 2001) were developed. The requirements for a repair mortar for these specific applications are described. Furthermore, the basics of cathodic corrosion protection with zinc are presented. T2 - 3rd International conference on concrete repair, rehabilitation and retrofitting III CY - Cape Town, South Africa DA - 03.09.2012 KW - Repair mortar KW - Concrete repair KW - Dalles de verre KW - Cultural heritage KW - Concrete glazing KW - Cathodic protection PY - 2012 SN - 978-0-415-89952-9 IS - Theme 2 SP - 607 EP - 612 PB - CRC Press CY - London, UK AN - OPUS4-26507 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Ünal, Murat T1 - Entwicklung modularer Steinersatzmassen für Instandsetzung und Reprofilierung von Naturstein im denkmalgeschützten Bereich N2 - Der größtmögliche Erhalt von Originalsubstanz ist das Ziel restauratorischer Maßnahmen, besonders an Denkmälern aus Naturstein. Der überwiegende Anteil der Restaurierungsarbeiten erfolgt in enger Abstimmung mit Denkmalpflegern. Die Objekte mit ihren speziellen Problemstellungen und Schadensbildern stellen höchste Ansprüche an den Restaurator im Hinblick auf die Instandsetzung. Aus technischer Sicht wäre oft eine Vierung, das heißt der Ersatz des beschädigten Steins durch ein neues Steinelement, die technisch zu bevorzugende Lösung. Bei Arbeiten im denkmalgeschützten Bereich sind Reprofilierungstechniken mit Steinersatzmassen jedoch eine sinnvolle Alternative, um möglichst wenig Originalsubstanz zu zerstören oder die Ausbesserung ggf. auch wieder entfernen zu können. T2 - 18. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 12.09.2012 KW - Instandsetzungsmörtel KW - Steinersatzmasse KW - Naturstein KW - Steininstandsetzung KW - Reprofilierung KW - Modulares System KW - Denkmalschutz PY - 2012 SN - 978-3-00-034075-8 VL - 2 IS - 3.07 SP - 2-1123 EP - 2-1130 AN - OPUS4-26548 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Ünal, Murat A1 - Kühne, Hans-Carsten T1 - Polymer modified repair mortars for the restoration of natural stone in cultural heritage N2 - A research project dealing with the development and optimisation of modular repair mortars for natural stone is currently carried out at the BAM (Federal Institute of Materials Research and Testing). To provide the conservator with the best possible options to match colour, texture and technical requirements of the stone, the repairmortar System will be Setup on a modular basis. Different binder Systems are planned, which can be combined with different aggregate compositions and different pigments. The aim is to be able to modify the appearance of the mortar independent of ist mechanical properties. When working in the ränge of cultural heritäge, one specific demand is the Option of total reversibility of each repair task. In order to guarantee the reversibility and to ensure that the repair mortar does by no means induce any Damage to the original substance (e.g. by constraining forces), strength and stiffhess of the repairmortar have to be controlled and kept below the respective values of the original natural stone. On the other hand the mortar needs a certain abrasion resistance and durability. To accomplish all these requirements the use of polymer dispersions is very helpful, as they allow the production of low stiffhess mortars with at the same time relatively high flexural strength values. Also investigations on “alternative” modifications known from historical applications such as the use of casein are carried out. T2 - ASPIC 2012 - 7th Asian symposium on polymers in concrete CY - Istanbul, Turkey DA - 03.10.2012 KW - Repair mortar KW - Natural stone KW - Cultural heritage KW - Polymer cement mortar (PCC) KW - Stone restoration KW - Stone reprofiling KW - Casein PY - 2012 SN - 978-975-561-427-4 SP - 415 EP - 422 AN - OPUS4-26775 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ünal, Murat T1 - Instandsetzen von Rissen, Korrosion und Betonabtrag T2 - BMO-Fachtagung - Bauen mit Beton im Bestand und Betoninstandsetzung CY - Leipzig, Germany DA - 2012-11-27 PY - 2012 AN - OPUS4-27299 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Ünal, Murat A1 - Kühne, Hans-Carsten ED - Uzoegbo, H.C. ED - Schmidt, Wolfram T1 - Modular repair mortars for natural stone in cultural heritage N2 - For the protection of the world’s cultural heritage the restoration of listed buildings and monuments is an important task. In many cases the need to repair and reprofile natural stone elements occurs. Repair mortars for such applications have to match historico-cultural interests as well as durability related and constructive interests. Currently a research project dealing with the development and optimisation of such mortars is set up at the German Federal Institute of Materials Research and Testing (BAM). To provide the conservatorwith the best possible options to match the colour, texture and technical requirements of the stone, the repair mortar System will be setup on a modular basis. Different binder Systems are planned to be combined with different aggregate compositions and different pigments. By the modular setup the possibility of independent adjustment of mechanical properties and appearance is aimed. In order to guaranty the reversibility and to ensure that the repair mortar does not induce any damage to the original substance, strength and stiffness of the repair mortar have to be well controlled. The use of polymer dispersions is helpful here, as they allow the production of low stiffness mortars with at the same time relatively high flexural strength values. Also investigations on “alternative” modifications known from historical applications such as the use of casein are carried out. Despite the urgency of seemingly more important building tasks, there is also a great demand for natural stone repair in cultural heritage on the African continent. There is a wide ränge of different objects reaching from prehistoric monuments up to colonial architecture, all in different säte of preservations and subjected to a variety of individual environmental ant climatic conditions, which demand individual and adjustable restoration techniques and materials. T2 - ACCTA - International conference on advances in cement and concrete technology in Africa 2013 CY - Johannesburg, South Africa DA - 28.01.2013 KW - Repair mortar KW - Natural stone KW - Cultural heritage KW - Polymer cement mortar (PCC) KW - Stone restoration KW - Stone reprofiling PY - 2013 SN - 978-3-9815360-3-4 SP - 1089 EP - 1098 AN - OPUS4-27768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -