TY - CONF A1 - Munsch, Sarah Mandy T1 - Ermittlung der Porosität von Sandsteinen - Vergleich von Quecksilberporosimetrie, Tauchwägung und NMR N2 - Die Porosität sowie die Porengrößenverteilung (PSD) eines Baustoffs sind wichtige petrophysikalische Eigenschaften, die Transportprozesse im Material beeinflussen und im direkten Zusammenhang mit der Schadensanfälligkeit stehen (Frost-Tau-Schäden, Schäden durch Salzeinträge und sauren Regen). Verfahren zur Ermittlung der Porosität stellen die Quecksilberporosimetrie (MIP), das Prinzip der Tauchwägung nach Archimedes (triple weighing method, TWM) und die Nuklear Magnetische Resonanz (NMR) dar. Das Hauptziel dieser Arbeit ist der Vergleich der drei Methoden für die Porositätsbestimmung. Als Untersuchungsmaterial wurde Sandstein gewählt. Als Baustoff wird Sandstein trotz einer teilweise geringen Festigkeit, aber aufgrund seiner Farbvielfalt häufig für Kulturbauten, Gehwegmaterial und Fassaden eingesetzt. Sandsteine weisen zudem meist eine hohe effektive Porosität (bis zu ca. 30 %) und teilweise breite Porengrößenspektren auf, wodurch Feuchte- und Ioneneinträge begünstigt werden und zu z. B. langfristigen Verfärbungen an Sandsteinfassaden führen können. Im Rahmen dieser Arbeit werden die Porositäten von 10 verschiedenen Sandsteinen aus Deutschland und Tschechien bestimmt. Für die Untersuchungen mittels TWM und NMR wurden für jede Sandsteinart zwei zylinderförmige Proben unter Unterdruck mit Leitungswasser aufgesättigt. Beim Vergleich der Verfahren liegt der Fokus insbesondere auf NMR und der verwendeten Gerätetechnik, die mit einer minimalen Echozeit von 50 µs ein Wasserstoffsignal in Sandsteinen aus bis zu ca. 2 nm kleine Poren erfassen kann. Darüber hinaus wird das Auflösungsvermögen von MIP und NMR bezüglich der Poren- bzw. Poreneingangsgrößen diskutiert. Für den Vergleich von NMR und MIP werden an ausgewählten Sandsteinproben ebenfalls die zusätzlich ermittelten PSD in Korrelation zueinander gebracht. Erste Ergebnisse zeigen eine gute Korrelation von NMR- und TWM-Daten, aber teilweise starke Abweichungen zu den mit MIP bestimmten Porositäten. Ergebnisse zu den PSD zeigen teilweise nahezu identische Kurvenverläufe. Jedoch ist die Abschätzung des Umrechnungsfaktors für die NMR-Daten ohne Hinzuziehen von zusätzlichen Referenzverfahren wie Röntgen-Computer-Tomographie oder Spektral Induzierte Polarisation teilweise sehr schwierig. T2 - Bauwerksdiagnose CY - Berlin, Germany DA - 13.02.2020 KW - NMR KW - Porosität KW - Sandsteine KW - Quecksilberporosimetrie KW - Tauchwägung PY - 2020 N1 - Geburtsname von Munsch, Sarah Mandy: Nagel, S. M. - Birth name of Munsch, Sarah Mandy: Nagel, S. M. AN - OPUS4-50405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munsch, Sarah Mandy T1 - Ermittlung des Flüssigwasseranteils an voll- und teilgesättigten Sandsteinen mittels 1H-NMR und Hygrometrie N2 - Da Feuchte insbesondere in Form von Flüssigwasser ein hohes Schadenspotential für Baustoffe und Konstruktionen darstellt, finden zerstörungsfreie Verfahren wie die Kernspinresonanz (NMR) zunehmend Einsatz im Bauwesen. Auch wenn zur qualitativen Lokalisierung möglicher Schad- und Risikostellen bereits zahlreiche zerstörungsfreie Verfahren in der Praxis Anwendung finden, so besteht beispielweise bei der Porenraumcharakterisierung und dem Verständnis von Feuchtetransportmechanismen weiterhin Forschungsbedarf. Eine besondere Herausforderung stellt in diesem Zusammenhang die (ortsaufgelöste) Erfassung und Quantifizierung von Feuchteverteilungen bei Teilsättigung dar. Mittels 1H-NMR lassen sich der Wassergehalt sowie die Relaxationszeiten der Wasserstoffprotonen in Abhängigkeit von ihrer Bindungsart und der Porenumgebung messen. In vollgesättigten porösen Baustoffen kann somit das NMR-Signal als Porengrößenverteilung interpretiert werden. Da aber in der Praxis nur selten bis nie vollgesättigte Zustände vorliegen, befasst sich eine laufende Forschungsarbeit mit dem Verständnis der NMR-Signale teilgesättigter Porensysteme, die teilweise multimodale Porengrößenverteilungen aufweisen. Im Rahmen dieser Arbeit werden insgesamt 19 Sandsteine aus Deutschland, Tschechien und Italien sowohl im voll- als auch im teilgesättigten Zustand mit NMR untersucht. Definierte teilgesättigte Zustände werden durch Aufsättigen der Proben in Exsikkatoren mit verschiedenen relativen Luftfeuchten (z. B. 33 %, 75 %, 96%) erzeugt. Die Regulierung der Luftfeuchten erfolgt mit Hilfe von gesättigten Salzlösungen. Als Ergebnis wird die Veränderung der Signalamplitude und der T2-Relaxationszeitenverteilungen in Abhängigkeit von dem Feuchtezustand näher betrachtet. Des Weiteren erfolgt die Berechnung des Flüssigwasseranteils bzw. der adsorbierten Wasserfilmdicke einzelner Poren aus der mit Quecksilberporosimetrie bestimmten Porengrößenverteilung und der Annahme einer Porengeometrie (z.B. Schlitz-, Zylinderpore, etc.). Am Ende dieser Arbeit soll der Zusammenhang des NMR-Signals (Amplitude und Relaxationszeiten) mit dem Porensättigungsgrad in einem Porensystem mit multimodaler Porengrößenverteilung bei Teilsättigung aufgezeigt werden. T2 - Jahrestagung der Deutschen Geophysikalischen Gesellschaft CY - Online meeting DA - 18.05.2020 KW - NMR KW - Sandstein KW - Flüssigwasser KW - Teilsättigung KW - Hygrometrie PY - 2020 N1 - Geburtsname von Munsch, Sarah Mandy: Nagel, S. M. - Birth name of Munsch, Sarah Mandy: Nagel, S. M. AN - OPUS4-50861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munsch, Sarah Mandy T1 - Anwendung von KI für die Materialoptimierung im Bauwesen N2 - Diese Arbeit untersucht den Einsatz von Künstlicher Intelligenz (KI) in der Materialentwicklung für Beton, mit einem Fokus auf Karbonatisierungswiderstand, CO₂-Reduktion und Kostenoptimierung. Das KI-Tool SLAMD, das auf inverses Materialdesign setzt, konnte in Studien die Entwicklungszeit für Betonmischungen um bis zu 80 % verkürzen. Durch die Integration zusätzlicher 1H-Kernspinresonanz-Daten wurde der Prozess um weitere 40 % beschleunigt. Insgesamt zeigt sich, dass der Einsatz von KI die Effizienz und Nachhaltigkeit in der Materialentwicklung signifikant steigern kann. T2 - 11. Jahrestagung des DAfStb mit 63. Forschungskolloquium der BAM Green Intelligent Building CY - Berlin, Germany DA - 16.10.2024 KW - Cement & Concrete KW - SLAMD app KW - Nuclear magnetic KW - Resonance KW - Carbonation resistance PY - 2024 AN - OPUS4-61423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munsch, Sarah Mandy T1 - NMR zur Beobachtung von Trocknungsprozessen und Hydratationsverhalten an Baustoffen N2 - Im Rahmen der Arbeit soll die Anwendbarkeit des Verfahrens der Nuklear Magnetischen Resonanz (NMR) zur Charakterisierung von Porensystemen und Feuchtetransportmechanismen in Baustoffen untersucht werden. Ein Ziel ist dabei die Bestimmung des Flüssigwasseranteils bei Teilsättigung. Dazu wird die Porensättigung in Abhängigkeit der relativen Luftfeuchte im Porensystem berechnet, um erstmals eine Korrelation zwischen dem NMR-Signal und dem Porensättigungsgrad in einem multimodalen Porengrößensystem bei Teilsättigung vornehmen zu können. Derzeit erfolgen Aufsättigungsversuche an Referenzmaterialien (Sandsteine und Kalziumsilikatplatten). Bereits vorgenommene Untersuchungen bei Vollsättigung an Estrichen haben zunächst eine von der Literatur abweichende Oberflächenrelaxivität ergeben. Dieses Ergebnis legt den Verdacht nahe, dass ein hinreichender Ettringitgehalt, ein Hydratationsprodukt, Einfluss auf die resultierende Oberflächenrelaxivität in Baustoffen haben kann. Somit wird ein weiterer Forschungsschwerpunkt auf den Ettringitgehalt gelegt. Neben ersten Voruntersuchungen mit LIBS und NMR-Spektroskopie, zur Überprüfung der Nachweisbarkeit von Ettringit, sowie ersten Tests zur Steuerung der Ettringitbildung mittels Betonverflüssigern wurde bereits eine Messreihe geplant. Für diese und zukünftige Messungen soll dabei auch erstmals ein neu beschaffter und speziell angefertigter NMR-Tomograph (BAM-Größtgeräteinvestition 2016) Anwendung finden und neue Erkenntnisse ermöglichen. T2 - Doktorandenseminar der 8. Abteilung CY - Berlin, Germany DA - 15.10.2018 KW - NMR KW - Ettringit KW - Relative Luftfeuchte KW - Porenraumanalyse KW - Feuchte PY - 2018 N1 - Geburtsname von Munsch, Sarah Mandy: Nagel, S. M. - Birth name of Munsch, Sarah Mandy: Nagel, S. M. AN - OPUS4-46298 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munsch, Sarah Mandy A1 - Telong, Melissa A1 - Grobla, Lili A1 - Schumacher, Katrin A1 - Völker, Christoph A1 - Yared, Kaleb A1 - Kruschwitz, Sabine ED - Ferrara, Liberato ED - Muciaccia, Giovanni ED - di Summa, Davide T1 - Study on the Predictability of Carbonation Resistance of Cementitous Materials Based on NMR Features and the Use of SLAMD N2 - This study explores the acceleration of material design in the concrete industry, focusing on improving carbonation resistance, a key factor in the durability of concrete structures. Traditional tests for carbonation resistance are lengthy, but with the construction industry aiming for sustainable production, finding a balance between carbonation resistance and CO2 footprint is crucial. Our research employs two innovative methods: 1. Applying the Sequential Learning App for Materials Discovery (SLAMD), an AI materials design framework, to an extensive dataset of real-world concrete compositions to selectively test materials that meet market demands: maximum durability, optimal eco-durability, and the best cost-durability trade-off. 2. Investigating 1H Nuclear Magnetic Resonance (NMR) relaxometry as a quick alternative for characterizing carbonation behavior, as it saves time compared to traditional tests and assesses the complete material’s pore space. Specific NMR features are then integrated into the material design model, with the model’s performance compared against traditional approaches. The results of our study are compelling, demonstrating that materials can be precisely tailored to meet specific requirements with minimal data points. This marks a significant stride in the concrete industry, indicating thatNMR-based, lowfidelity surrogate characterizations, combined with a focused, data-driven design approach, can substantially accelerate the development of durable, sustainable concrete mixtures. T2 - 4 RILEM Spring Convention and Conference on advanced construction materials and processes for a carbon neutral society 2024 CY - Milano, Italy DA - 07.04.2024 KW - Nuclear magnetic resonance KW - carbonation resistance KW - cement and concrete KW - SLAMD app KW - predictability PY - 2024 DO - https://doi.org/10.1007/978-3-031-70281-5_49 VL - 2 SP - 435 EP - 442 PB - Springer CY - Cham, Switzerland AN - OPUS4-61692 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munsch, Sarah Mandy A1 - Strangfeld, Christoph A1 - Kruschwitz, Sabine T1 - Interpretation of NMR signals from partly saturated sandstones N2 - The development of prevention methods and the detection of moisture related damages in buildings and transport infrastructure at an early stage are current issues in the field of non-destructive testing in civil engineering. Especially the subject of partial saturation requires further research since it is more likely to occur than full saturation of the material. In fact, partial saturation in porous media is even more complicated because both fully and partly saturated pores (i.e. pores in which the surfaces are covered with thin water layers) are present. As the non-destructive method nuclear magnetic resonance (NMR) enables the measurement and quantification of relative low moisture contents, it is suitable for the investigation of partly saturated porous building materials. Nevertheless, the differentiation between partly and fully saturated pores is still a challenge. Therefore, in this study, we investigate two sandstones types (Bozanov and Schönbrunner sandstone) at various defined saturation states by using NMR. Furthermore, we measure the relative humidities within the samples and compute the water layer thicknesses (WLT) along the pore walls of all pore sizes to calculate the corresponding degree of pore saturation. To finally assign the NMR signals to pore sizes and to differentiate between partly and fully saturated pores, the water content distribution obtained from the WLT calculation is used for calibration of the relaxation-time distribution. In this extended abstract, selected results only for Schönbrunner sandstone are presented. T2 - ISEMA 2021 CY - Online meeting DA - 26.07.2021 KW - NMR KW - Relative humidity KW - Water layer thickness KW - Partial pore saturation KW - Pore-size distribution PY - 2021 SN - 978-1-7281-8736-5 VL - 2021 SP - 111 EP - 115 PB - IEEE AN - OPUS4-53045 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munsch, Sarah Mandy T1 - 1H NMR Relaxometry: A Reliable Tool for Predicting Durability Properties? N2 - Resistance to carbonation and chloride migration are critical durability properties in cementitious construction materials. The ingress of CO2 and chlorides can lead to concrete deterioration and reinforcement corrosion, underscoring the importance of ensuring high resistance to these durability-reducing factors. Traditional methods, such as determinating the carbonation coefficient using standard procedures, are time-consuming and resource-intensive. These tests typically require 42 days of preconditioning, followed by 70 days before the final results can be determined using a phenolphthalein test, for a total duration of 112 days. In addition, some test chambers can only accommodate four samples at a time. In this study, we investigate whether 1H NMR relaxometry can effectively predict not only the carbonation resistance, KAC,3%, but also the chloride migration coefficient, DRCM, and the compressive strength, fc, of concrete, providing a method that could potentially streamline and accelerate the material development process by directing us quickly to potentially well-suited formulations. We performed measurements on non-carbonated fully saturated concrete and mortar samples at 28, 56, and 92 days using the NMR tomograph at BAM (8.9 MHz). Notably, the NMR measurements taken at 28 days showed no significant differences, suggesting that this timeframe is sufficient for meaningful results. The samples analyzed were drill cores, each 70 mm in diameter and approximately 120 mm in height. The NMR features we focused on included the initial amplitude E0, the x and y values of the dominant T2 relaxation time, and the logarithmic mean of the T2 relaxation time distribution. Another key feature was the surface relaxivity, which was determined by comparing the NMR curves with results from mercury intrusion porosimetry. We examined the correlation of these NMR features with the aforementioned durability properties, which were determined in a laboratory on sister samples using standard procedures. No chloride migration tests were performed on the mortar samples, and the carbonation procedure was carried out unter atmospheric conditions. The preliminary results show that the correlation factors for the NMR features with the carbonation coefficients of concrete were particularly remarkable. The strongest correlations were observed for the dominant relaxation time and the logarithmic mean, with values approaching 1. The preliminary results also indicate that there are high correlations between the compressive strength and amplitude-related features. In contrast, no strong correlations are observed for the DRCM. Although the results related to the mortar samples are still being analyzed, these initial correlations suggest that 1H NMR relaxometry could be a valuable tool for early assessment of material properties. Furthermore, the rapid and non-destructive nature of NMR measurements, requiring only a few minutes per sample, suggests that this technique has the potential to significantly accelerate the process of evaluating durability properties in cementitious materials. This capability also paves the way for the use of NMR features as input for AI-driven predictive models. T2 - Magnetic Resonance in Porous Media 2024 CY - Tromso, Norway DA - 26.08.2024 KW - Nuclear magnetic resonance KW - SLAMD KW - Carbonation KW - Durability PY - 2024 AN - OPUS4-61058 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munsch, Sarah Mandy T1 - Study on the predictability of carbonation resistance of cementitous materials based on nmr features and the use of slamd N2 - This study explores the acceleration of material design in the concrete industry, focusing on improving carbonation resistance, a key factor in the durability of concrete structures. Traditional tests for carbonation resistance are lengthy, but with the construction industry aiming for sustainable production, finding a balance between carbonation resistance and CO2 footprint is crucial. Our research employs two innovative methods: 1. Applying the Sequential Learning App for Materials Discovery (SLAMD), an AI materials design framework, to an extensive dataset of real-world concrete compositions to selectively test materials that meet market demands: maximum durability, optimal eco-durability, and the best cost-durability trade-off. 2. Investigating 1H Nuclear Magnetic Resonance (NMR) relaxometry as a quick alternative for characterizing carbonation behavior, as it saves time compared to traditional tests and assesses the complete material's pore space. Specific NMR features are then integrated into the material design model, with the model's performance compared against traditional approaches. The results of our study are compelling, demonstrating that materials can be precisely tailored to meet specific requirements with minimal data points. This marks a significant stride in the concrete industry, indicating that NMR-based, low-fidelity surrogate characterizations, combined with a focused, data-driven design approach, can substantially accelerate the development of durable, sustainable concrete mixtures. T2 - Rilem Spring Convention & Conference CY - Milan, Italy DA - 10.04.2024 KW - Nuclear magnetic resonance KW - Carbonation resistance KW - Cement and concrete KW - SLAMD app KW - Predictability PY - 2024 AN - OPUS4-60000 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kruschwitz, Sabine A1 - Munsch, Sarah Mandy A1 - Strangfeld, Christoph A1 - Wöstmann, Jens A1 - Borchardt, Kerstin T1 - Eignung zerstörungsfreier Messtechnik für die Bestimmung der Belegreife von Estrichen N2 - Die Bestimmung der Belegreife von Estrichen erfolgt im Bauwesen meist unter Verwendung von zerstörenden Verfahren, die Probenentnahmen erfordern und nur punktuelle Daten liefern. Bei anhydritgebundenen Estrichen gelten 0,5 M% und bei zementgebundenen ca. 3,5 M% und höher als belegreifer Feuchtegehalt. Die Belegreife wird als Feuchtegehalt in Masseprozent (M%) bezogen auf die Trockenmasse des Baustoffes angegeben. Zur zerstörungsfreien Feuchtemessung existieren verschiedene einfach zu bedienende Handgeräte, die u. a. auf elektrischen, elektromagnetischen und kapazitiven Methoden beruhen. In dieser Arbeit wurden ein kapazitives (Kugelsonde), ein elektromagnetisches (Mikrowellensensoren) und ein elektrisches Messverfahren (Vierelektroden-Sonde) untersucht. Mit Ausnahme der Vierelektroden-Sonde weisen die Handgeräte keine ausreichende Sensitivität in Bereichen niedriger Feuchtegehalte unterhalb von 1 M% auf und scheinen somit nicht für anhydritgebundene Estriche geeignet zu sein. Für zementgebundene Estriche lassen sich hingegen mit allen getesteten Geräten Änderungen in dem Bereich der Belegreife erfassen. In dieser Arbeit wird zusätzlich die Wasserabgabe in g/m²/Tag als Bezugsgröße herangezogen. Die Wasserabgabe stellt ein geeigneteres Maß für die Schadensträchtigkeit dar und ermöglicht direkte Vergleiche unabhängig von der verwendeten Estrichart. Für alle getesteten Estriche konnte eine Wasserabgabe von ca. 8-10 g/m²/Tag als Belegreifegrenzwert bestimmt werden. N2 - The determination of the readiness for covering of screeds in the construction industry is usually carried out by using destructive methods, which require sampling and only provide punctual data. As non-destructive testing methods, various hand tools exist, which are based on electrical and capacitive methods and are easy to handle. In this study, a capacitive spherical probe, a 4-Electrode probe in Wenner configuration and microwave probes were tested. With the exception of the 4-Electrode probe, the hand instruments do not have sufficient sensitivity in ranges of low humidity below 1 M%, and therefore do not appear to be suitable for anhydrite-bound screeds with a readiness of covering at 0.5 M%. On the other hand, for cement-bound screeds, it is possible to record changes in the range of the readiness of covering. The readiness of covering is usually stated and determined in reference to the relative moisture content. For the purpose of really assessing the risk of damage, we suggest to rather use the “water loss” in g/m²/day. Our results show in direct comparisons that value of approximately 8-10 g/m²/day is a reliable indicator for the readiness for covering of all tested screed types. KW - Estrich KW - Feuchte KW - Zerstörungsfreie Prüfung KW - Calcium-Carbid-Methode KW - Mikrowellensensoren KW - Vierelektroden-Sonde KW - Kapazitive Kugelsonde KW - Screed KW - Moisture KW - Readiness for covering KW - Non-destructive testing KW - Calcium carbide method KW - Microwave KW - 4-electrode probe KW - Capacitive spherical probe PY - 2017 DO - https://doi.org/10.1002/bate.201700051 SN - 1437-0999 N1 - Geburtsname von Munsch, Sarah Mandy: Nagel, S. M. - Birth name of Munsch, Sarah Mandy: Nagel, S. M. VL - 95 IS - 4 SP - 265 EP - 274 PB - Ernst & Sohn AN - OPUS4-43169 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kruschwitz, Sabine A1 - Munsch, Sarah Mandy A1 - Wöstmann, Jens A1 - Strangfeld, Christoph T1 - Zerstörungsfreie Feuchtemessungen an Estrichen mittels der geophysikalischen Methoden Georadar und NMR N2 - Die Ermittlung der Belegreife von Fußbodenestrichen ist im Bauwesen von hoher Bedeutung, da es bei dem Verlegen von Parkett oder anderen Bodenbelägen auf Estrichen zu erheblichen feuchtigkeitsbedingten Schäden kommen kann, wenn diese noch nicht hinreichend getrocknet sind. Für die Messung des Feuchtegehalts wird üblicherweise auf zerstörende Methoden wie das Darr- und CM-Verfahren zurückgegriffen, die Probennahmen erfordern und nur punktuelle Informationen liefern. Ziel dieser Forschungsstudie ist die Untersuchung der Eignung und Anwendbarkeit des Georadars und der Kernspinresonanz (NMR) zur zerstörungsfreien und flächendeckenden Feuchtemessung von Estrichen. Dazu wurden Messungen mit beiden Verfahren an einer Gruppe zementgebundener (CT) und einer Gruppe anhydritgebundener (CA) Estriche während ihres Austrocknungsprozesses bei einem Konstant-Klima durchgeführt. Bei dem Radarverfahren werden Amplitude und Laufzeit elektromagnetischer Reflexionen, die durch den Wassergehalt beeinflusst werden, gemessen. Die Radarmessungen erfolgten auf jeder Probe entlang von zwei senkrechten Profilen mit einer 2GHz-Antenne. Die Kernspinresonanz steht aufgrund ihrer Abhängigkeit zur magnetischen Kernresonanz der 1H-Wasserstoffatomen in Relation mit dem Wassergehalt in dem Messvolumen der zu untersuchenden Probe. Die Untersuchungen erfolgten mit dem NMR MOUSE System in Aufsatztechnik. Dabei liegt die Eindringtiefe bei 24,8 mm. Bei den Untersuchungen lässt sich für CT-Estriche ein starker vertikaler Feuchtegradient feststellen. Die CA-Estriche weisen hingegen nur einen schwachen Feuchtegradienten bis nahezu konstante Amplituden über die gesamte Tiefe auf. Nach Erreichen einer Amplitude von ca. 5-8 lässt sich keine weitere Amplitudenveränderung registrieren bzw. sind ab diesen Zeitpunkt die Änderungen im Wassergehalt zu gering, um von der NMR aufgelöst zu werden. In den Ergebnissen des Radarverfahrens lässt sich ebenfalls ein von dem Feuchtegehalt abhängiges Verhalten der Messparameter beobachten. Mit zunehmender Trocknung kann man eine Abnahme der Laufzeit zwischen direkter und an der Rückwand reflektierter Welle messen. Die Amplituden beider Wellen hingegen nehmen während des Austrocknungsprozesses zu. Im Gegensatz zur NMR erhält man keine tiefenbezogenen Informationen. Es lassen sich aber Rückschlüsse auf den Feuchtegehalt im Gesamtvolumen ziehen. T2 - 77. Jahrestagung der Deutschen Geophysikalischen Gesellschaft CY - Potsdam, Germany DA - 27.03.2017 KW - Feuchtemessung KW - Estrich KW - Georadar KW - NMR PY - 2017 N1 - Geburtsname von Munsch, Sarah Mandy: Nagel, S. M. - Birth name of Munsch, Sarah Mandy: Nagel, S. M. AN - OPUS4-43245 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -