TY - CONF A1 - Melzer, Michael T1 - Werkzeugkasten für die digitale Transformation der QI: eAttestation N2 - Für den internationalen Handel mit Waren und Dienstleistungen ist es entscheidend, dass sich Qualitätsaussagen schnell und verlässlich überprüfen lassen. Gleichzeitig müssen digitale Ergebnisberichte immer häufiger maschinenlesbar sein und vertrauensvoll in Anwendungen und Prozesse der Industrie 4.0 eingebunden werden. Aus diesen Gründen hat die DAkkS ein digitales Akkreditierungssymbol (d-AS) entwickelt. Dieser Impulsvortrag zeigt kurz die Entwicklung des d-AS von der analogen Form bis zur automatisierten digitalen Verifizierung und stellt seine Anwendung und Funktionalitäten auf einer eAttestation vor. T2 - QI-Digital Forum 2024 CY - Berlin, Germany DA - 09.10.2024 KW - eAttestation KW - Digital certificates KW - QI-Digital KW - Quality Infrastructure KW - Automation PY - 2024 UR - https://www.qi-digital.de/termine-und-veranstaltungen/meldung/rueckblick-auf-das-qi-digital-forum-2024-pressemitteilung AN - OPUS4-61897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - VIDEO A1 - Melzer, Michael T1 - Der DCC-Demonstrator erklärt N2 - In diesem Video erklärt Dr. Michael Melzer (Leiter des BAM-Kalibrierlabors) die notwendigen Entwicklungsschritte hin zu einer Praxistauglichkeit des DCCs und wie die „Metrologische Rückführung auf Knopfdruck“ funktioniert. Der digitale Kalibrierschein macht den Kalibrierprozess effizienter, sicherer und digital nachverfolgbar. Anhand eines Demonstrators zeigt er die Vorteile der metrologischen Digitalisierung und Automatisierung in der Anwendung – von der Reduzierung von Fehlerquellen bis hin zum wirtschaftlichen Nutzen im industriellen Messwesen. KW - Digital calibration certificate KW - QI-digital KW - Digital metrology KW - Calibration KW - Automation PY - 2024 UR - https://www.youtube.com/watch?v=0lfYypvTl9E&t=8s PB - YouTube, LLC CY - San Bruno, CA, USA AN - OPUS4-62076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Melzer, Michael T1 - Good Practice für DCCs von Temperatur- und Feuchtemessgrössen N2 - Der digitale Kalibrierschein (DCC) enthält alle Informationen eines herkömmlichen Kalibrierscheins in maschinenlesbarer und möglichst auch -interpretierbarer Form, um eine Automatisierung des Qualitätsmanagements und der metrologischen Rückführbarkeit in den Laboren und im industriellen Messwesen zu ermöglichen. Neben den allgemeinen Anforderungen, z.B. aus ISO/IEC 17025, gibt es messgrößen- und kalibrierverfahrensspezifische Anforderungen, die auch in digitalen Ergebnisberichten erfüllt sein müssen. Innerhalb des DKD Fachausschusses für Temperatur und Feuchte werden derzeit good practice Empfehlungen erarbeitet, um zu definieren, wie genau diese Anforderungen im Rahmen des DCC erfüllt werden sollten. Anhand der Temperaturskala des Kalibriermediums und der Angabe der Hysterese werden drei dieser good practices hier beispielhaft erläutert. T2 - TEMPERATUR 2024 CY - Berlin, Germany DA - 05.06.2024 KW - Digital Calibration Certificate KW - Digital certificates KW - QI-Digital KW - Digital Metrology KW - Calibration PY - 2024 UR - https://www.temperatur.ptb.de/startseite AN - OPUS4-61891 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nicolicea, Alberto A1 - Oliveros-Mata, E. S. A1 - Zabila, Y. A1 - Makarov, D. A1 - Melzer, Michael A1 - Pelkner, Matthias T1 - Flexible anisotropic magnetoresistive sensors for novel magnetic flux leakage testing capabilities N2 - Rigid magnetic field sensors such as anisot Hall sensors have been used for years and have become industry standard for electromagnetic non-destructive testing (NDT). Recent technological developments in the field of flexible electronics allow for the fabrication of reshapeable magnetic field sensors on flexible substrates via thin-film deposition or printing. The magnetic properties of these sensors have comparable characteristics to industry-standard rigid magnetic field sensors, with the added ability of adapting to the surface of complex components and scanning in contact with the sample surface. This improves defect detectability and magnetic signal strength by minimizing the scanning lift-off (LO) distance. In this article flexible AMR sensors mounted on a rotative mechanical holder were used to scan a semi-circular ferromagnetic sample with 3 reference defects via magnetic flux leakage (MFL) testing, thus demonstrating the applicability of this type of sensors for the scanning of curved samples. In order to benchmark the performance of these sensors in comparison to industry standard rigid magnetic field sensors, a ferromagnetic sample with 10 reference defects of different depths was scanned employing flexible AMR and rigid GMR sensors. Defects with depths ranging from 110 μm up to 2240 μm were detected with an signal-tonoise ratio (SNR) of 2.7 up to 27.9 (for flexible AMR sensors) and 6.2 up to 72.3 (for rigid GMR sensors), respectively. A 2D magnetometer mapping of the sample with a spatial scanning step of 10 × 50 μm2 (flexible AMR) and 16 × 100 μm2 (rigid GMR) was obtained. The results show that this type of sensor can be used for high-resolution and high-detail mapping of defects on the surface of planar and non-planar ferromagnetic samples since the scanning lift-off distance is equal to the substrate thickness of 20 μm for in-contact scanning. The SNR comparison between flexible and rigid sensors shows that the performance of the flexible AMR sensors employed is not very far behind the performance of the rigid GMR sensors used. KW - Flexible magnetic field sensors KW - Non-destructive testing KW - Magnetic flux leakage KW - Thin film sensor fabrication KW - Defect detection PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-603931 DO - https://doi.org/10.1016/j.ndteint.2024.103160 SN - 0963-8695 VL - 146 SP - 1 EP - 15 PB - Elsevier CY - Amsterdam AN - OPUS4-60393 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nicolicea, Alberto A1 - Oliveros-Mata, E. S. A1 - Makarov, D. A1 - Melzer, Michael A1 - Pelkner, Matthias T1 - Flexible anisotropic magnetoresistive sensors for novel eddy current testing applications N2 - The standard method for eddy current testing (ET) of conductive materials relies on using rigid coils. In recent years magnetoresistive (MR) sensors in combination with an excitation wire have become a promising candidate for this application since it would increase the spatial resolution. New developments in flexible electronics have enabled the production of flexible sensors with the novel capability of scanning samples in conformal contact with the surface. In this article flexible anisotropic magnetoresistive (AMR) sensors were used in combination with a thin induction wire to perform eddy current testing of a curved aluminum sample with several defects imprinted on its surface. To benchmark the performance of this new method, a flat sample with reference defects of various dimensions was also scanned using flexible AMR sensors, inductive coils and rigid giant magnetoresistive (GMR) sensors. The results show that this new method of using flexible magnetic field sensors coupled with an excitation wire can easily be applied to the scanning of curved samples, while in the benchmark test employing the flat sample, the performance is not far behind more conventional techniques, with defects with depths down to 30 μm and widths down to 400 μm being detectable with an SNR of 3 (signal magnitude) and 8 (signal phase shift) at the excitation frequency of 50 kHz, and defects with depths down to 30 μm and widths down to 600 μm being detectable with an SNR of 10 (signal magnitude) and 17 (signal phase shift) at 260 kHz. KW - Magnetic field sensors KW - Flexible magnetic field sensors KW - Flexible electronics KW - Non-destructive testing KW - Eddy current testing KW - Thin film sensor fabrication KW - Defect detection KW - Magnetism PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-634325 DO - https://doi.org/10.1016/j.measurement.2025.117340 SN - 1873-412X VL - 253, Part A SP - 1 EP - 15 PB - Elsevier CY - Amsterdam AN - OPUS4-63432 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Melzer, Michael T1 - The temperature DCC exposed N2 - The DAkkS-accredited calibration laboratory of the German Federal Institute for Materials Research and Testing (BAM) has established valid XML digital calibration certificates (DCCs) for calibrations of resistance thermometers within the scope of its accreditation. Hence, all necessary information according to ISO/IEC 17025 and the DKD-R 5-1 calibration rule is provided in a machine-readable and machine-interpretable form. Furthermore, we actively participate in the definition of general and community-specific good practice requirements for the DCC of temperature quantities as technical specifications, hosted by the German Calibration Service (DKD). In this contribution the entire XML source code of a DCC from a Pt 100 thermometer calibration will be exposed and discussed. The DCC was automatically generated using a self-implemented middleware that is compiling the metadata (i.e. customer-, order-, item- and method data) and combines it with the measured calibration data and influence conditions into a process- and lab-specific DCC template. Since it was issued as an accredited calibration certificate, the validated and authorized DCC is also equipped with the novel digital accreditation symbol to form an `eAttestation´. This advanced electronic seal with a qualified certificate was recently piloted with the German national accreditation body (DAkkS), and, after successful validation by the receiver, verifies the active accreditation status of the issuing body at the time of sealing (authorization). As it also provides all other functionalities of an electronic seal, (i.e. data integrity and authenticity), it can fully replace a digital signature on accredited DCCs. The presented temperature DCC architecture fully complies to the latest good practice definitions of the DKD and thus represents a level 4 DCC according to the utility model for machine interpretability of DCCs. This also includes basic and quantity-specific refType definitions that are linked to an online refType repository to harmonize these key semantic providing elements across other DCC-issuing laboratories. The work was performed within the national QI-Digital initiative of the German Federal Ministry for Economic Affairs and Climate Action. T2 - Deutsche Marktüberwachungskonferenz 2025 CY - Berlin, Germany DA - 17.09.2025 KW - Calibration KW - Digital Calibration Certificate KW - E-Attestation KW - Digital Metrology KW - QI-Digital PY - 2024 AN - OPUS4-64147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Melzer, Michael T1 - The digital accreditation symbol: verified trust in digital certificates N2 - This presentation provides a brief overview of the digital accreditation symbol, which is available for DAkkS-accredited bodies to proof their active accreditation on digital reports and certificates (eAttestations). The basic functionality, application and automatic verifycation is presented on PDF and XML based eAttestations. T2 - International Metrology Congress (CIM) 2025 CY - Lyon, France DA - 11.03.2025 KW - Akkreditation KW - Digital Calibration Certificate KW - E-Attestation KW - Digital Certificates KW - QI-Digital PY - 2025 AN - OPUS4-64174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Melzer, Michael T1 - The temperature DCC exposed N2 - The DAkkS-accredited calibration laboratory of the German Federal Institute for Materials Research and Testing (BAM) has established valid XML digital calibration certificates (DCCs) for calibrations of resistance thermometers within the scope of its accreditation. Hence, all necessary information according to ISO/IEC 17025 and the DKD-R 5-1 calibration rule is provided in a machine-readable and machine-interpretable form. Furthermore, we actively participate in the definition of general and community-specific good practice requirements for the DCC of temperature quantities as technical specifications, hosted by the German Calibration Service (DKD). In this contribution the entire XML source code of a DCC from a Pt 100 thermometer calibration will be exposed and discussed. The DCC was automatically generated using a self-implemented middleware that is compiling the metadata (i.e. customer-, order-, item- and method data) and combines it with the measured calibration data and influence conditions into a process- and lab-specific DCC template. Since it was issued as an accredited calibration certificate, the validated and authorized DCC is also equipped with the novel digital accreditation symbol to form an `eAttestation´. This advanced electronic seal with a qualified certificate was recently piloted with the German national accreditation body (DAkkS), and, after successful validation by the receiver, verifies the active accreditation status of the issuing body at the time of sealing (authorization). As it also provides all other functionalities of an electronic seal, (i.e. data integrity and authenticity), it can fully replace a digital signature on accredited DCCs. The presented temperature DCC architecture fully complies to the latest good practice definitions of the DKD and thus represents a level 4 DCC according to the utility model for machine interpretability of DCCs. This also includes basic and quantity-specific refType definitions that are linked to an online refType repository to harmonize these key semantic providing elements across other DCC-issuing laboratories. The paper and also its conference poster will not represent a general introduction and motivation for the DCC itself. It rather addresses more detailed aspects of good practice, especially for DCCs from temperature quantity calibrations and may stimulate in-depth discussions between DCC experts from the providing, utilizing and accrediting points of view. The work was performed within the national QI-Digital initiative of the German Federal Ministry for Economic Affairs and Climate Action, T2 - Global Industrie CY - Lyon, France DA - 11.03.2025 KW - Calibration KW - Digital Calibration Certificate KW - E-Attestation KW - Digital Metrology KW - QI-Digital PY - 2024 AN - OPUS4-64177 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Brunner, Nanine A1 - Melzer, Michael T1 - Digital Certificates: Enabling Automation in Quality Assurance and Metrological Traceability N2 - Automation in the metrological traceability of measurements bears high potential for a more effective quality management with less human interaction and reduced risks from manual data processing. For this purpose all metrological and administrative information in quality certificates must be provided in a fully machine-readable and machine-interpretable form. Following the well-established approach of dig-ital calibration certificates (DCCs) also other digital quality certificates are currently under development. T2 - SMSI 2025 Conference – Sensor and Measurement Science International CY - Nuremberg, Germany DA - 06.05.2025 KW - Digital metrology KW - Calibration KW - Quality assurance KW - Reference materials KW - Automation PY - 2025 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-641930 SN - 978-3-910600-06-5 DO - https://doi.org/10.5162/SMSI2025/C6.4 SP - 171 EP - 172 PB - AMA Service GmbH CY - Wunstorf AN - OPUS4-64193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Melzer, Michael T1 - Die Umsetzung maschinenlesbarer DCCs am Beispiel der Kraftkalibrierung nach DIN EN ISO 376 N2 - Dieser Vortrag stellt eine konkrete Umsetzung eines DCCs (Digitaler Kalibrierschein) einer Kraftkalibrierung nach nach DIN EN ISO 376 vor. Nach einer kurzen Zusammenfassung der Aspekte, die in der international gültigen Kalibriernorm geregelt sind und einer allgemeinen Vorstellung von gängigen Kalibriereinrichtungen und -gegenständen, wird zunächst auf die Besonderheiten hingewiesen, die in derartigen Kalibrierscheinen enthalten sind und bisher kaum in anderen DCCs umgesetzt wurden. Dies sind z.B. die Einbindung mehrerer Messreihen (auf- und abwärts) in teilweise unterschiedlichen Einbaupositionen, Klassifizierung, multiple relative Messunsicherheiten sowie Ausgleichsfunktionen mit mehreren Sätzen von Koeffizienten. Anschließen wird die konkrete Umsetzung dieser Angaben im DCC im Einzelnen aufgezeigt. Die präsentierten Lösungen wurden im gemeinsamen DCC Unterausschuss der DKD Fachausschüsse für Kraft und Beschleunigung sowie Drehmoment erarbeitet und werden in Kürze als pränormativer Expertenbericht erscheinen. Die Kalibrierung wurde innerhalb des akkreditierten Geltungsbereiches des BAM Kalibrierlabors durchgeführt. T2 - 329. PTB-Seminar "Berechnung der Messunsicherheit – Empfehlungen für die Praxis" CY - Berlin, Germany DA - 19.05.2025 KW - Calibration KW - Digital Calibration Certificate KW - Force Measurements KW - Digital Metrology KW - QI-Digital PY - 2025 UR - https://www.ptb.de/cms/fileadmin/internet/fachabteilungen/abteilung_8/8.4_mathematische_modellierung/8.42/329_PTB_Seminar/Tag1_S2/DCC-ISO376.pdf AN - OPUS4-64209 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - van de Kreeke, Johannes A1 - Melzer, Michael T1 - The Digital RM Document (DRMD) N2 - The Digital Reference Material Document (DRMD) is a machine-readable replacement of the usual PDF Certificate. We have developed a fully functional beta version that is already in use for selected BAM materials and publicly available from the COMAR database, which showcases its feasibility. T2 - Deutsche Marktüberwachungskonferenz 2025 CY - Berlin, Germany DA - 17.09.2025 KW - Reference materials KW - Certified reference materials KW - Digital zertificates KW - QI-Digital PY - 2025 AN - OPUS4-64148 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Melzer, Michael T1 - The Digital RM Certificate Derived from the DCC N2 - The digital calibration certificate (DCC), is based on an XML-schema, which defines its general data structure and terminology. This DCC-schema is maintained and hosted by the PTB. In oder to also provide reference material certificates in machine-readable formats, allowing its automated processing and administration, the DCC-Schema is adapted to meet the specific requirements of reference material documents. This video presentation highlights the differences and similarities of both quality documents in terms of digitalization and introduces a first attempt to a DRMC-schema. T2 - CCQM Online Workshop on Digital and FAIR Chemical and Biological Reference Data and Certificates: Challenges and Opportunities CY - Online meeting DA - 09.09.2024 KW - Reference materials KW - Digital certificates KW - QI-Digital KW - Digital reference material document KW - Digital Metrology PY - 2024 AN - OPUS4-61888 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -