TY - JOUR A1 - Zientek, Nicolai A1 - Laurain, C. A1 - Meyer, Klas A1 - Paul, Andrea A1 - Engel, D. A1 - Guthausen, G. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Automated data evaluation and modelling of simultaneous F-19-H-1 medium-resolution NMR spectra for online reaction monitoring N2 - Medium-resolution nuclear magnetic resonance spectroscopy (MR-NMR) currently develops to an important analytical tool for both quality control and processmonitoring. In contrast to high-resolution onlineNMR (HR-NMR),MR-NMRcan be operated under rough environmental conditions. A continuous re-circulating stream of reaction mixture fromthe reaction vessel to the NMR spectrometer enables a non-invasive, volume integrating online analysis of reactants and products. Here, we investigate the esterification of 2,2,2-trifluoroethanol with acetic acid to 2,2,2-trifluoroethyl acetate both by 1H HR-NMR (500MHz) and 1H and 19F MRNMR (43MHz) as amodel system. The parallel online measurement is realised by splitting the flow,which allows the adjustment of quantitative and independent flow rates, both in the HR-NMR probe as well as in the MR-NMR probe, in addition to a fast bypass line back to the reactor. One of the fundamental acceptance criteria for online MR-MNR spectroscopy is a robust data treatment and evaluation strategy with the potential for automation. The MR-NMR spectra are treated by an automated baseline and phase correction using the minimum entropy method. The evaluation strategies comprise (i) direct integration, (ii) automated line fitting, (iii) indirect hard modelling (IHM) and (iv) partial least squares regression (PLS-R). To assess the potential of these evaluation strategies for MR-NMR, prediction results are compared with the line fitting data derived from the quantitative HR-NMR spectroscopy. Although, superior results are obtained from both IHM and PLS-R for 1H MR-NMR, especially the latter demands for elaborate data pretreatment, whereas IHM models needed no previous alignment. KW - NMR KW - 1H-NMR KW - 19F-NMR KW - Medium-resolution NMR KW - Online NMR KW - Quantitative NMR KW - Reaction monitoring KW - Data processing KW - Automation KW - Process analytical technology KW - IHM KW - Indirect hard modeling KW - Chemometrics KW - PLS-R KW - Partial least squares regression PY - 2016 UR - http://onlinelibrary.wiley.com/doi/10.1002/mrc.4216/abstract DO - https://doi.org/doi:10.1002/mrc.4216 VL - 54 SP - 513 EP - 520 PB - John Wiley & Sons, Ltd CY - Hoboken, New Jersey, USA AN - OPUS4-36135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Clever und Smart - Die neuen Prozess-Sensoren 4.0 N2 - Die gravierenden Veränderungen im Umfeld der Informations- und Kommunikationstechnik beeinflussen auch die Prozessautomation und sind zugleich eine Chance. Denn die Automatisierungskonzepte gemäß Industrie 4.0 sichern den Wettbewerbsvorteil einer Volkswirtschaft. Ein zentrales Element bilden dabei smarte Sensoren, die Dienste innerhalb eines Netzwerks bereitstellen und Information daraus nutzen. Die im November 2015 vorgestellte Technologieroadmap Prozess-Sensoren 4.0 [1] zeigt Anforderungen an smarte Prozess-Sensoren auf. Der Beitrag befasst sich mit den Fragen „Was kann der Prozess-Sensor zu Industrie 4.0 beitragen?“ und „Welchen Nutzen bringt Industrie 4.0 für den Prozess-Sensor?“ KW - Technologieroadmap KW - Prozess-Sensoren 4.0 KW - Industrie 4.0 KW - Prozessanalytik PY - 2016 SN - 0178-2320 VL - 58 IS - 3 SP - 28 EP - 35 PB - DIV Deutscher Industrieverlag CY - München AN - OPUS4-35717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - qNMR-Referenzmaterialien und "Indirect Hard Modeling" (IHM) als Integrationsmethode N2 - Resolving overlapping peaks of multiple components. Relative primary analytical method - Fundamental relationship of qNMR. T2 - 4. Sitzung der Next-NMR-Arbeitsgruppe CY - Karlsruhe, Germany DA - 08.12.2015 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - Indirect Hard Modeling (IHM) KW - Referenzmaterialien PY - 2015 AN - OPUS4-36138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Die neuen Prozess-Sensoren 4.0 - Selbstdiagnose, Selbstkalibrierung und Selbstkonfiguration stehen im Fokus N2 - Heute wie morgen müssen Prozess-Sensoren zuerst die Aufgabe des Messens und der Generierung von Prozessinformationen erfüllen. Die Mess-Signale gehen in der Regel auf physikalische oder chemische Größen zurück, werden durch eine Kennlinie repräsentiert und lassen sich kalibrieren. Heute muss man dazu einen großen Aufwand betreiben, denn die physikalischen oder chemischen Informationen werden in vielen Fällen nicht direkt gemessen, sondern verbergen sich in Rohdaten, z. B. in einem optischen Spektrum. Diese Kalibrierungen können für komplexe Sensoren teilweise mehr Kostenaufwand bedeuten, als das Messgerät selbst. KW - Prozess-Sensoren KW - Prozess-Sensoren 4.0 KW - Industrie 4.0 KW - Kommunikationsstandards KW - Technologie-Roadmap PY - 2016 SN - 0947-4188 IS - 7-8 SP - 16 EP - 16 PB - Wiley-VCH Verlag GmbH & Co. KGaA AN - OPUS4-35812 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Ostermann, Markus A1 - Schmid, Thomas T1 - Process analytical technology for resource analytics – The role of reference materials N2 - Resource Analytics with the help of process analytical technology and the use of online methods is becoming increasingly important for mining and processing technologies and for the recovery of raw materials from secondary raw materials. Current online analytical methods like laser-induced breakdown spectroscopy (LIBS), X-ray fluorescence analysis (RFA), or Raman spectroscopy for the characterization of primary and secondary raw materials are increasingly being used in close association with the technologies for exploration and extraction, mechanical and metallurgical processing, as well as for recycling. Because of the complex matrices such methods are a considerable challenge at the same time. The use of reference materials, which are derived from appropriate matrices, can considerably shorten calibration and method development times. As an example, the development of an online process control method for recovery of phosphorus from sewage sludge ashes is discussed. A combination of LIBS and RFA was developed for the determination of element contents in sewage sludge ashes and their products coming from a thermo-chemical reprocessing step, which removes pollutants. T2 - Analytica Conference CY - München, Germany DA - 10.05.2016 KW - Resource Analytics KW - Ressourcenanalytik KW - Prozessanalytik KW - Process Analytical Technology PY - 2016 AN - OPUS4-36043 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - „NMR-METRONOMIE“ Die quantitative NMR-Spektroskopie (qNMR) gibt den Takt an N2 - qNMR is a pelative primary analytical method: Overview on fundamental relationships of qNMR T2 - Festkolloquium NMR-Spektroskopie (zum 25 jährigen Jubiläum der Firma Spectral Service, Köln) CY - Köln, Germany DA - 18.09.2015 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - Metrologie PY - 2015 AN - OPUS4-36140 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Schmid, Thomas T1 - Möglichkeiten zur Sonderprobenanalytik - Gemeinsame Aktivitäten mit dem Salsa-Applikationslabor der Humboldt Universität zu Berlin N2 - Troubleshooting Samples Analytics: Impurities in products: unexpected & unwanted occurrence, unknown identity, analytical method unclear, often various analytical methods, necessary, short response time important (< 1 d), benefits: allocation of its source within hours safes cost • Investigations planned, coordinated and documented by TSA team • Variety of analytical methods available T2 - 3. Analytic-City-Forum Berlin Adlershof CY - Berlin, Germany DA - 08.10.2015 KW - Troubleshooting Samples Analytics KW - TSA KW - Sonderprobenanalytik KW - Salsa KW - Applikationslabor PY - 2015 AN - OPUS4-36139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zientek, Nicolai A1 - Meyer, Klas A1 - Kern, Simon A1 - Maiwald, Michael T1 - Quantitative online NMR spectroscopy in a nutshell N2 - Online NMR spectroscopy is an excellent tool to study complex reacting multicomponent mixtures and gain process insight and understanding. For online studies under process conditions, flow NMR probes can be used in a wide range of temperature and pressure. This paper compiles the most important aspects towards quantitative process NMR spectroscopy in complex multicomponent mixtures and provides examples. After NMR spectroscopy is introduced as an online method and for technical samples without sample preparation in deuterated solvents, influences of the residence time distribution, pre-magnetization, and cell design are discussed. NMR acquisition and processing parameters as well as data preparation methods are presented and the most practical data analysis strategies are introduced. KW - Prozessanalytik KW - Process analytical technology KW - Online NMR spectroscopy KW - Online monitoring PY - 2016 DO - https://doi.org/10.1002/cite.201500120 SN - 0009-286X VL - 88 IS - 6 SP - 698 EP - 709 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim, Germany AN - OPUS4-36333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Paul, Andrea A1 - Carl, Peter A1 - Westad, Frank A1 - Voss, J.-P. A1 - Maiwald, Michael T1 - Towards process spectroscopy in complex fermentation samples and mixtures N2 - Supernatants from a fermentation process of Pichia pastoris were investigated by Raman spectroscopy. Using partial least squares regression, the principal substrates glycerol and methanol could be predicted, however not the expressed protein. To gain further insight, a priori prepared calibration samples were studied by vibrational-, UV/Vis-, and fluorescence spectroscopy. For the quantification of glycerol and methanol, Raman spectroscopy was identified as the most sensitive technique, and superior to near-infrared spectroscopy, but not for protein contents below 1 g L–1. Both UV/Vis absorption and fluorescence spectroscopy are well suited for the quantification of protein, however, best results were obtained with UV/Vis absorption. KW - Fluorescence KW - NIR spectroscopy KW - Partial least squares regression KW - Pichia pastoris KW - Raman spectroscopy KW - UV/VIS spectroscopy PY - 2016 DO - https://doi.org/10.1002/cite.201500118 SN - 0009-286X SN - 1522-2640 VL - 88 IS - 6 SP - 756 EP - 763 PB - WILEY-VCH Verlag GmbH & Co. KGaA CY - Weinheim, Germany AN - OPUS4-36755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Resch-Genger, Ute A1 - Maiwald, Michael T1 - Analytical Sciences an der BAM N2 - Die Bundesanstalt für Materialforschung und -prüfung (BAM) ist eine wissenschaftlich technische Bundesoberbehörde im Geschäftsbereich des Bundesministeriums für Wirtschaft und Energie (BMWi), die über einen gesetzlichen Auftrag für die Sicherheit in Technik und Chemie verfügt und auf nahezu 150 Jahre zurückblicken kann. Vor diesem Hintergrund forscht, entwickelt, und prüft die BAM in den fünf Themenfeldern Energie, Infrastruktur, Umwelt, Material und Analytical Sciences mit einer unikalen Vielfalt an analytischen Methoden. KW - BAM KW - Analytik KW - Analytical Sciences PY - 2016 SN - 0939-0065 IS - 2 SP - 6 EP - 8 AN - OPUS4-36508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -