TY - JOUR A1 - Meyer, Klas A1 - Ruiken, J.-P. A1 - Illner, M. A1 - Paul, Andrea A1 - Müller, D. A1 - Esche, E. A1 - Wozny, G. A1 - Maiwald, Michael T1 - Process spectroscopy in microemulsions - setup and multi-spectral approach for reaction monitoring of a homogeneous hydroformylation process N2 - Reaction monitoring in disperse systems, such as emulsions, is of significant technical importance in various disciplines like biotechnological engineering, chemical industry, food science, and a growing number other technical fields. These systems pose several challenges when it comes to process analytics, such as heterogeneity of mixtures, changes in optical behavior, and low optical activity. Concerning this, online nuclear magnetic resonance (NMR) spectroscopy is a powerful technique for process monitoring in complex reaction mixtures due to its unique direct comparison abilities, while at the same time being non-invasive and independent of optical properties of the sample. In this study the applicability of online-spectroscopic methods on the homogeneously catalyzed hydroformylation system of 1-dodecene to tridecanal is investigated, which is operated in a mini-plant scale at Technische Universität Berlin. The design of a laboratory setup for process-like calibration experiments is presented, including a 500 MHz online NMR spectrometer, a benchtop NMR device with 43 MHz proton frequency as well as two Raman probes and a flow cell assembly for an ultraviolet and visible light (UV/VIS) spectrometer. Results of high-resolution online NMR spectroscopy are shown and technical as well as process-specific problems observed during the measurements are discussed. KW - Online-spectroscopy KW - Quantitative NMR spectroscopy KW - Process analytical technology KW - Microemulsions PY - 2017 DO - https://doi.org/10.1088/1361-6501/aa54f3 SN - 0957-0233 SN - 1361-6501 VL - 28 IS - 3 SP - 035501-1 EP - 035501-11 PB - IOP Publishing Ltd. AN - OPUS4-39091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Paul, Andrea A1 - Meyer, Klas A1 - Ruiken, Jan-Paul A1 - Illner, M. A1 - Müller, D.-N. A1 - Esche, E. A1 - Wozny, G. A1 - Westad, Frank A1 - Maiwald, Michael T1 - Process spectroscopy in microemulsions — Raman spectroscopy for online monitoring of a homogeneous hydroformylation process N2 - A major industrial reaction based on homogeneous catalysis is hydroformylation for the production of aldehydes from alkenes and syngas. Hydroformylation in microemulsions, which is currently under investigation at Technische Universität Berlin on a mini-plant scale, was identified as a cost efficient approach which also enhances product selectivity. Herein, we present the application of online Raman spectroscopy on the reaction of 1-dodecene to 1-tridecanal within a microemulsion. To achieve a good representation of the operation range in the mini-plant with regard to concentrations of the reactants a design of experiments was used. Based on initial Raman spectra partial least squares regression (PLSR) models were calibrated for the prediction of 1-dodecene and 1-tridecanal. Limits of predictions arise from nonlinear correlations between Raman intensity and mass fractions of compounds in the microemulsion system. Furthermore, the prediction power of PLSR models becomes limited due to unexpected by-product formation. Application of the lab-scale derived calibration spectra and PLSR models on online spectra from a mini-plant operation yielded promising estimations of 1-tridecanal and acceptable predictions of 1-dodecene mass fractions suggesting Raman spectroscopy as a suitable technique for process analytics in microemulsions. KW - Raman KW - Online KW - Chemometrics KW - Hydroformylation KW - Mini-plant KW - Microemulsion PY - 2017 DO - https://doi.org/10.1088/1361-6501/aa54f0 SN - 1361-6501 SN - 0957-0233 VL - 28 IS - 3 SP - 035502-1 EP - 035502-11 PB - IOP Publishing Ltd CY - UK AN - OPUS4-39032 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Andrea A1 - Müller, D. A1 - Esche, E. A1 - Wozny, G. A1 - Maiwald, Michael T1 - Chemometric modeling of on-line Raman spectra from miniplant operation N2 - The project InPROMPT aims to establish a robust hydroformylation reaction process of the alkene n-dodecene to the aldehyde n-tridecanal using a rhodium complex as catalyst in the presence of syngas. This industrial relevant production process demands further research for optimization and expansion. For that purpose, the fiber optic coupled probe of a process Raman spectrometer is directly introduced in the product stream, which enables the recording of spectra within short control intervals. T2 - 10. Kolloquium Arbeitskreis Prozessanalytik CY - Gerlingen, Germany DA - 25.11.2014 KW - Reaction monitoring KW - Chemometrics KW - Raman spectroscopy KW - Hydroformylation PY - 2014 UR - http://arbeitskreis-prozessanalytik.de/images/stories/Veranstaltungen/Kolloquien/10_kolloquium_2014/tagungsband_10_kolloquium_ak_prozessanalytik_2014_hq-druck_f.pdf SP - P12, 34 EP - 34 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-38361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Andrea A1 - Ruiken, J.-P. A1 - Meyer, Klas A1 - Westad, Frank A1 - Illner, M. A1 - Müller, D. A1 - Wozny, G. A1 - Maiwald, Michael T1 - Online spectroscopy in microemulsions – A process analytical approach for hydroformylation miniplant II - Calibration and prediction by Raman spectra N2 - The Collaborative Research Center InPROMPT aims to establish a novel process concept for the hydroformylation of long-chained olefins, using a rhodium complex as catalyst in the presence of syngas. Recently, the hydroformylation in micro-emulsions, which allows for the efficient recycling of the expensive rhodium catalyst, was found to be feasible. However, the temperature and concentration sensitive multi-phase system demands a continuous observation of the reaction to achieve an operational and economically feasible plant operation. For that purpose, we tested the potential of both NMR and Raman spectroscopy for process control assistance. The lab-scale experiments were supported by sampling for off-line GC-analysis as reference analytics. The results of the NMR experiments will be part of another contribution. T2 - 11. Kolloquium Arbeitskreis Prozessanalytik CY - Wien, Austria DA - 30.11.2015 KW - Prozessanalytik KW - Process analytical technology KW - Prozess-Spektroskopie KW - Emulsions KW - Hydroformylation KW - Reaction monitoring KW - Raman spectroscopy PY - 2015 SP - 66 EP - 67 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Es ist Arznei, nicht Gift, was ich dir reiche N2 - Der Artikel ist ein Editorial, der für die Herstellung eines grundlegenden Vertrauens in medizinische Produkte - insbesondere Impfstoffe - wirbt, um Skeptiker zu Unterstützern zu machen. Er wirbt nicht nur für die Impfstoffe, sondern auch für die Kultur der Pharmazie und Chemie und die Wissenschaft ganz allgemein und regt an, mehr erklärende Formate wie z. B. im Stil der Sendung mit der Maus für diese Dinge zu werben. Der Artikel geht auch auf den ungeheuren Reiz der seit gut zwanzig Jahren diskutierten risikobasierten Ansätze für pharmazeutische Entwicklung und Herstellung von Arzneimitteln auf Basis der Quality Guidelines ein. KW - Impfstoffe KW - Pharmazeutische Produktion KW - Qualitätssicherung KW - Wissenschaftskultur KW - Prozessanalytik KW - Quality by Design PY - 2021 UR - http://ojs.di-verlag.de/index.php/atp_edition/issue/archive SN - 2190-4111 VL - 63 IS - 3 SP - 1 EP - 1 PB - Vulkan-Verlag GmbH CY - Essen AN - OPUS4-52264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer, Klas A1 - Kraemer, B. A1 - Zientek, Nicolai A1 - Esche, E. A1 - Müller, D. A1 - Wozny, G. A1 - Maiwald, Michael T1 - Eine robuste Prozessanalytik für die Reaktivabsorption von CO2 aus industriellen Gasströmen basierend auf Online-NMR- und -Raman-Spektroskopie N2 - Die Abtrennung von CO2 aus industriellen Gasströmen ist eine großtechnisch wichtige Trennaufgabe. Neben der Aufarbeitung von Erdgas werden diese Verfahren zur Verminderung der CO2-Emission durch industrielle Rauchgase, insbesondere für alternativlose Prozesse wie die Stahl- und Zementproduktion diskutiert. T2 - 10. Kolloquium Arbeitskreis Prozessanalytik CY - Gerlingen, Germany DA - 25.11.2014 KW - Prozessanalytik KW - Quantitative NMR-Spektroskopie KW - Raman spectroscopy KW - CO2-Absorption KW - CCS PY - 2014 UR - http://arbeitskreis-prozessanalytik.de/images/stories/Veranstaltungen/Kolloquien/10_kolloquium_2014/tagungsband_10_kolloquium_ak_prozessanalytik_2014_hq-druck_f.pdf SP - P03, 23 EP - 23 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer, Klas A1 - Ruiken, J.-P. A1 - Illner, M. A1 - Müller, D. A1 - Esche, E. A1 - Paul, Andrea A1 - Wozny, G. A1 - Maiwald, Michael T1 - Online spectroscopy in microemulsions – A process analytical approach for hydroformylation miniplant I – Experimental setup and NMR reaction monitoring N2 - Hydroformylation represents an important homogeneous catalyzed process, which is widely used within chemical industry. Usually applied with simple alkenes like Propene and Butene aldehydes obtained from alkenes >C6 are relevant intermediates in production of plasticizers, surfactants and polymers. Today the active catalyst species is often based on valuable Rhodium complexes in aqueous solution. This implies the problem of limited water solubility of the reactands, which is acceptable for short chain lengths, but states a problem in case of higher alkenes. Along with that efficient separation and recycling of the catalyst becomes more complicated. There are different approaches tackling this problem, e.g., by using of salt formation in the BASF process or downstream distillation within the Shell process T2 - 11. Kolloquium Arbeitskreis Prozessanalytik CY - Wien, Austria DA - 30.11.2015 KW - Prozessanalytik KW - Process analytical technology KW - Emuslions KW - Hydroformylation KW - Online NMR spectroscopy KW - Reaction monitoring PY - 2015 SP - 51 EP - 51 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38845 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meyer, Klas A1 - Kern, Simon A1 - Zientek, Nicolai A1 - Guthausen, G. A1 - Maiwald, Michael T1 - Process control with compact NMR N2 - Compact nuclear magnetic resonance (NMR) instruments make NMR spectroscopy and relaxometry accessible in industrial and harsh environments for reaction and process control. An increasing number of applications are reported. To build an interdisciplinary bridge between “process control” and “compact NMR”,we give a short overviewon current developments in the field of process Engineering such as modern process design, integrated processes, intensified processes along with requirements to process control, model based control, or soft sensing. Finally, robust field integration of NMR systems into processes environments, facing explosion protection or Integration into process control systems, are briefly discussed. KW - Prozessanalytik KW - Quantitative NMR-Spektroskopie KW - Industrie 4.0 KW - Reaction monitoring KW - Process control KW - Online NMR spectroscopy KW - Compact NMR PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-373562 UR - http://www.sciencedirect.com/science/article/pii/S0165993616300073 DO - https://doi.org/10.1016/j.trac.2016.03.016 SN - 0165-9936 VL - 83 IS - Part A / SI SP - 39 EP - 52 PB - Elsevier AN - OPUS4-37356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Meyer, Klas A1 - Kern, Simon A1 - Guhl, Svetlana A1 - Gräßer, Patrick A1 - Wander, Lukas A1 - Paul, Andrea T1 - Man proposes, God disposes – The Way from Reaction Monitoring to Industrial Automation N2 - Compact nuclear magnetic resonance (NMR) instruments make NMR spectroscopy and relaxometry accessible in industrial and harsh environments for reaction and process control. An increasing number of applications are reported. Robust field integration of NMR systems have to face explosion protection or integration into process control systems with short set-up times. Tis paves the way for industrial automation in real process environments. Automated data preparation and analysis are cornerstones for a breakthrough of NMR techniques for process control. Particularly, robust chemometrics as well as automated signal processing methods have to be (further) developed especially for NMR spectroscopy in process control. This becomes even more important for so called “smart sensors” providing the basis for the future project “Industrie 4.0”, and Industrial Internet of Things (IIoT), along with current requirements to process control, model based control, or soft sensing. Data analysis techniques are available but currently mostly used for off-line data analysis to detect the causes of variations in the product quality. The talk presents current research activities towards process control with compact NMR and reflects “cultural differences” between the interdisciplinary parties involved. T2 - Symposium NMRPM - Quantitative NMR Methods for Reaction and Process Monitoring CY - Kaiserslautern, Germany DA - 19.01.2017 KW - Reaction Monitoring KW - Process Analytical Technology KW - Smart Sensors KW - Process Control KW - Industrie 4.0 KW - Online NMR Spectroscopy PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-389940 AN - OPUS4-38994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die Technologie-Roadmap „Prozess-Sensoren 4.0“ – Chancen für neue Automatisierungskonzepte und neue Geschäftsmodelle N2 - Die auf der NAMUR HS 2015 vorgestellte Technologie-Roadmap „Prozess-Sensoren 4.0“ zeigt die nötigen Anforderungen an Prozess-Sensoren sowie an deren Kommunikations-fähigkeiten auf. Wir berichten über den Stand der Diskussionen im Trialog zwischen Anwendern, Software- und Geräteherstellern sowie der Forschung. Ein wichtiger Schlüssel ist die Definition einer bedarfsgerechten und einheitlichen Topologie für solche smarten Sensoren, die in einem Arbeitskreis „Smarte-Sensorik“ ohne im wechselseitigen Austausch mit Geräte- und Softwareherstellern und Forschungseinrichtungen vorangetrieben werden soll. T2 - 1. Forum Embedded Spektroskopie CY - Berlin, Germany DA - 01.12.2016 KW - Roadmap KW - Prozess-Sensoren 4.0 KW - Prozessanalytik KW - Embedded spectroscopy PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-385611 AN - OPUS4-38561 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Guhl, Svetlana A1 - Meyer, Klas A1 - Kern, Simon A1 - Gräßer, Patrick A1 - Maiwald, Michael ED - Maiwald, Michael T1 - Process monitoring of an intensified continuous production unit with compact NMR spectroscopy N2 - Monitoring chemical reactions is the key to chemical process control. Today, mainly optical online methods are applied. NMR spectroscopy has a high potential for direct loop process control. Compact NMR instruments based on permanent magnets are robust and relatively inexpensive analyzers, which feature advantages like low cost, low maintenance, ease of use, and cryogen-free operation. Instruments for online NMR measurements equipped with a flow-through cell, possessing a good signal-to-noise-ratio, sufficient robustness, and meeting the requirements for integration into industrial plants (i.e., explosion safety and fully automated data analysis) are cur-rently not available off the rack. Recently, promising benchtop NMR instruments with acceptable performance came to market and process integrated sensors developed on basis of such laboratory instruments are on their way. T2 - 12. Kolloquium des Arbeitskreises Prozessanalytik CY - Berlin, Germany DA - 28.11.2016 KW - Online NMR spectroscopy KW - Modular production units KW - Low field NMR spectroscopy PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-383646 SP - P17, 75 EP - 77 AN - OPUS4-38364 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Peters, Claudia A1 - Meyer, Klas A1 - Kern, Simon A1 - Guhl, Svetlana A1 - Gräßer, Patrick A1 - Wander, Lukas T1 - How far does the light shine? A check-up of quantitative high and low field NMR spectroscopy N2 - The Royal Society of Chemistry NMR Discussion Group and Molecular Spectroscopy Group would like to invite you to the 2017 Spring Meeting, which will be held at GlaxoSmithKline (GSK), Stevenage. The theme for the meeting is “Low level detection and quantification by NMR” and different NMR technologies, including solution state NMR, solid state NMR and benchtop/low field NMR will be discussed. The presentations will cover a range of NMR related disciplines, including conventional low level detection and quantification, the use of cryoprobes, quantification of polymorphism using ssNMR and also methods for spectral simplification. Recent developments and applications of hyperpolarisation techniques, within both solution state and solid state NMR, will be presented in conjunction with the effect these sensitivity enhancements have with respect to quantification and limits of detection. T2 - NMR Discussion Group and Molecular Spectroscopy Group Spring Meeting: "Low Level Detection and Quantification by NMR Spectroscopy" CY - Stevenage, UK DA - 29.03.2017 KW - Online NMR Spectroscopy KW - Quantitative NMR Spectroscopy KW - qNMR KW - Indirect Hard Modeling KW - Limit of Detection KW - NMR Spectroscopy KW - Metrology PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-395936 AN - OPUS4-39593 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kern, Simon A1 - Maiwald, Michael T1 - Low field NMR spectroscopy for process control - robust automated data preparation and analysis as prerequisites T1 - Niederfeld NMR-Spektroskopie für die Prozesskontrolle – Robuste und automatisierte Datenvorbehandlung und Datenanalyse als Grundvoraussetzungen N2 - Berichtet wird über die automatisierte und spektral-modellgestützte Datenauswertung quantitativer Online-NMR-Spektren von technischen Systemen, die einen grundlegenden Beitrag zum Thematik Smart Sensors im Sinne kalibrierarmer bzw. kalibrierfreier Verfahren liefern. Die quantitative Online-NMR-Spektroskopie ist besonders reizvoll für diese Thematik: Sie kommt durch den direkten Nachweis der Kernspins ohne Kalibrierung aus und arbeitet auch in Konzentrationsrandbereichen äußerst linear. Als „absolute Vergleichsmethode“ (direkte Proportionalität der Signale zu den Stoffmengen innerhalb eines Spektrums) ist die NMR-Spektroskopie für die durchgeführten Grundlagenuntersuchungen im Zusammenhang mit spektralen Modellen prädestiniert. T2 - Seminar des Institut für Mathematik, Universität Rostock CY - Rostock, Germany DA - 12.07.2017 KW - Prozessanalytik KW - Prozess-Sensoren 4.0 KW - Online NMR Spektroskopie KW - Indirect Hard Modeling PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-409694 AN - OPUS4-40969 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Gräßer, Patrick A1 - Wander, Lukas A1 - Guhl, Svetlana A1 - Meyer, Klas A1 - Kern, Simon T1 - Sensor Roadmap 4.0 – Prospects towards a uniform topology for process control and smart sensor networks N2 - Smart functions of sensors simplify their use and enable plug-and-play, even though they are more complex. This is particularly important for, self-diagnostics, self-calibration and self-configuration/parameterization. Intelligent field devices, digital field networks, Internet Protocol (IP)-enabled connectivity and web services, historians, and advanced data analysis software are providing the basis for the future project “Industrie 4.0” and Industrial Internet of Things (IIoT). Important smart features include connectivity and communication ability according to a unified protocol (OPC-UA currently most widely discussed), maintenance and operating functions, traceability and compliance, virtual description to support a continuous engineering, and well as interaction capabilities between sensors. This is a prerequisite for the realization of Cyber Physical Systems (CPS) within these future automation concepts for the process industry. Therefore, smart process sensors enable new business models for users, device manufacturers, and service providers. The departure from current automation to smart sensor has already begun. Further development is based on the actual situation over several steps. Possible perspectives will be via additional communication channels to mobile devices, bidirectional communication, integration of the cloud and virtualization. The integration of virtual runtime environments can provide a more flexible topology for process control environments. The talk summarizes the currently discussed requirements to process sensors 4.0 and introduces an online NMR sensor as an example, which was developed in the EU project CONSENS. T2 - Swiss Chemical Society Fall Meeting, Symposium on PAT & Industry 4.0 CY - Bern, Switzerland DA - 21.08.2017 KW - Process Monitoring KW - Smart Sensors KW - Reaction Monitoring KW - Indirect Hard Modeling KW - Online NMR Spectroscopy KW - Industrie 4.0 PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-414683 AN - OPUS4-41468 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Using Smart Sensors and Modular Production Units for Sustainable and Flexible Production of High Quality Chemicals and Pharmaceuticals N2 - The talk reflects how PAT could be applied in future developments ofpharma manufacturing. It shows the benefits, increase quality, size and increasing speed of production with significant reduction of quality costs, which are possible. Using Smart Sensors and model based data evaluation methods are the key to reduce set-up times and costs. Industry 4.0 will help shape the Pharmaceutical industry of tomorrow. This is demonstrated by an example using modular production units for Continuous Manufacturing. The development of a smart online NMR analyser is shown. T2 - Pharma Talk 2017 CY - Berlin, Germany DA - 08.06.2017 KW - Process Monitoring KW - CONSENS KW - Online NMR Spectroscopy KW - Continuous Manufacturing KW - Pharmaceutical Production PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-405039 AN - OPUS4-40503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Gräßer, Patrick A1 - Wander, Lukas A1 - Zientek, Nicolai A1 - Guhl, Svetlana A1 - Meyer, Klas A1 - Kern, Simon T1 - Strangers in the Night—Smart Process Sensors in Our Current Automation Landscape N2 - The departure from the current automation landscape to next generation automation concepts for the process industry has already begun. Smart functions of sensors simplify their use and enable plug-and-play integration, even though they may appear to be more complex at first sight. Smart sensors enable concepts like self-diagnostics, self-calibration, and self-configuration/parameterization whenever our current automation landscape allows it. Here we summarize the currently discussed general requirements for process sensors 4.0 and introduce a smart online NMR sensor module as example, which was developed for an intensified industrial process funded by the EU’s Horizon 2020 research and innovation programme (www.consens-spire.eu). T2 - Eurosensors 2017 Conference CY - Paris, France DA - 03.09.2017 KW - Process Monitoring KW - Smart Sensors KW - CONSENS KW - Online NMR Spectroscopy KW - Mini-plant PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-415772 UR - http://www.mdpi.com/2504-3900/1/4/628 DO - https://doi.org/10.3390/proceedings1040628 VL - 1 SP - 628 EP - 631 PB - MDPI CY - Basel AN - OPUS4-41577 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Guhl, Svetlana A1 - Kern, Simon A1 - Meyer, Klas A1 - Wander, Lukas A1 - Gräßer, Patrick T1 - Design and validation of a compact NMR analyser N2 - Monitoring chemical reactions is the key to chemical process control. Today, mainly optical online methods are applied. NMR spectroscopy has a high potential for direct loop process control. Compact NMR instruments based on permanent magnets are robust and inexpensive analysers, which feature advantages like low maintenance, ease of use, and cryogen-free operation. Instruments for online NMR measurements equipped with a flow-through cell, possessing a good signal-to-noise-ratio, robustness, and meeting the requirements for integration into industrial plants (i.e., explosion safety and fully automated data analysis) are currently not available off the rack. Intensified continuous processes are in focus of current research. Flexible (modular) chemical plants can produce different products using the same equipment with short down-times between campaigns and quick introduction of new products to the market. In continuous flow processes online sensor data and tight closed-loop control of the product quality are mandatory. Otherwise there is a huge risk of producing large amounts of out-of-spec (OOS) products. This is addressed in the European Union’s Research Project CONSENS by development and integration of smart sensor modules for process monitoring and control within such modular plant setups. The presented NMR module is provided in an explosion proof housing with a module size of 57 x 57 x 85 cm and involves a compact 43.5 MHz NMR spectrometer together with an acquisition unit and a programmable logic controller for automated data preparation (phasing, baseline correction) and evaluation. Indirect Hard Modeling (IHM) was selected for data analysis of the low-field NMR spectra. A set-up for monitoring continuous reactions in a thermostated 1/8” tubular reactor using automated syringe pumps was used to validate the IHM models by using high-field NMR spectroscopy as analytical reference method. T2 - ANAKON 2017 CY - Tübingen, Germany DA - 03.04.2017 KW - Online NMR spectroscopy KW - Low-Field NMR spectroscopy KW - Modular production plants KW - Process analytical technology PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-396960 AN - OPUS4-39696 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Kneipp, Janina T1 - IR-Aktivitäten an der BAM - Anwendungen für die Prozessanalytik T2 - Fokusseminar "Infrarot: Quellen, Detekoren, Anwendungen" OpTecBB Berlin CY - Berlin, Germany DA - 2008-09-25 PY - 2008 AN - OPUS4-18506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Reaktions- und Prozeßmonitoring mit Online-NMR-Spektroskopie T2 - Wissenschaftl. Kolloquium Leibnitz-Institut für Katalyse e.V. Universität Rostock CY - Berlin, Germany DA - 2008-11-06 PY - 2008 AN - OPUS4-18503 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Reaktions- und Prozessmonitoring mit Online-NMR-Spektroskopie T2 - Fachgespräch Molekülspektroskopie, Wacker Chemie AG CY - Burghausen, Germany DA - 2009-03-23 PY - 2009 AN - OPUS4-19236 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Online-NMR-Spektroskopie in der Prozessanalytik T2 - Jahreskolloquium 2008 "Sensorik und Prozessanalytik" CY - Berlin, Germany DA - 2008-11-10 PY - 2008 AN - OPUS4-18504 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozeßanalytik mit Online-NMR-Spektroskopie - geht das? T2 - Bruker Anwendertreffen CY - Ettlingen, Germany DA - 2008-11-12 PY - 2008 AN - OPUS4-18518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Chancen der Prozessanalytik T2 - Fachgespräch Analytik CY - Visp, Switzerland DA - 2009-03-25 PY - 2009 AN - OPUS4-19235 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Maiwald, Michael A1 - Steinhof, O. A1 - Sleigh, C. A1 - Bernstein, M. A1 - Hasse, H. ED - Ulrike Holzgrabe, ED - Iwona Wawer, ED - Bernd Diehl, T1 - Quantitative high-resolution online NMR spectroscopy in pharmaceutical reaction and process monitoring KW - On-line technique KW - PAT KW - Hyphenation KW - Residence time PY - 2008 SN - 978-0-444-53173-5 IS - Chapter 8 SP - 471 EP - 491 PB - Elsevier AN - OPUS4-19343 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttinger, W. A1 - Maiwald, Michael A1 - Hasse, H. ED - Renon, H. T1 - Online NMR spectroscopic study of species distribution in MEA-H2O-CO2 and DEA-H2O-CO2 KW - Amine KW - MEA KW - DEA KW - NMR KW - Speciation PY - 2008 DO - https://doi.org/10.1016/j.fluid.2007.09.017 SN - 0378-3812 VL - 263 IS - 2 SP - 131 EP - 143 PB - Elsevier CY - Amsterdam AN - OPUS4-19359 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böttinger, W. A1 - Maiwald, Michael A1 - Hasse, H. T1 - Online NMR spectroscopic study of species distribution in MDEA-H2O-CO2 and MDEA-PIP-H2O-CO2 PY - 2008 DO - https://doi.org/10.1021/ie800914m SN - 0888-5885 SN - 1520-5045 VL - 47 IS - 20 SP - 7917 EP - 7926 PB - American Chemical Society CY - Washington, DC AN - OPUS4-19360 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Hergeth, W.-D. T1 - Trends in der Prozessanalytik: Von der Forschung zur industriellen Anwendung T2 - ProcessNet Jahrestagung CY - Mannheim, Germany DA - 2009-09-08 PY - 2009 AN - OPUS4-19378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die aktualisierte Technologie-Roadmap Prozess-Sensorik 2015+ T2 - eingeladener Vortrag NAMUR Hauptsitzung 2009 CY - Bad Neuenahr, Germany DA - 2009-11-04 PY - 2009 AN - OPUS4-20024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Schiwon, R. A1 - Mühlhaus, R. T1 - Das ideale Informationsmanagement für Labor und Produktion T2 - ANAKON CY - Berlin, Germany DA - 2009-03-17 PY - 2009 AN - OPUS4-19506 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessverständnis mit quantitativer NMR-Spektroskopie T2 - Symposium "10 Jahre NMR im Chemieingenieurwesen" CY - Karlsruhe, Germany DA - 2009-07-02 PY - 2009 AN - OPUS4-19557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Quantitative Online-NMR-Spektroskopie für die Prozessanalytik T2 - Tag der Chemie CY - Potsdam, Germany DA - 2009-06-04 PY - 2009 AN - OPUS4-19280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Chancen der Prozessanalyitk T2 - Kolloquium, Wacker Chemie AG CY - Burghausen, Germany DA - 2009-03-23 PY - 2009 AN - OPUS4-19237 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Technologie-Roadmap Prozess-Sensoren 2015+ N2 - Die Wettbewerbsfähigkeit der Chemisch-Pharmazeutischen Industrie basiert auf der Sicherung der geforderten Produktqualität bei einer optimalen Nutzung von Anlagen, Rohstoffen und Energie. Eine gute Prozessführung unter Einsatz zuverlässiger Prozessautomation sichert hier den globalen Wettbewerbsvorteil. Initiiert von NAMUR und GMA und unter Mitwirkung der Unternehmen ABB, BASF, BTS, BIS Prozesstechnik, E+H, Siemens und der BAM entstand jetzt die grundlegend aktualisierte und überarbeitete Technologie-Roadmap "Prozess-Sensoren 2015+", die im November 2009 veröffentlicht wurde. KW - Roadmap KW - Prozess-Sensoren KW - Prozessanalytik KW - Process sensors KW - Process analytics PY - 2010 SN - 0178-2320 VL - 52 IS - 1-2 SP - 40 EP - 45 PB - Oldenbourg-Industrieverl. CY - München AN - OPUS4-20916 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Maiwald, Michael A1 - Gasch, A. A1 - Gerlach, M. A1 - Kaiser, U. A1 - Kloska, M. A1 - Matalla, N. A1 - Morr, W. A1 - Panzke, R. A1 - Stieler, S. A1 - Westerkamp, D. T1 - Prozess-Sensoren 2015+ - Technologie-Roadmap für Prozess-Sensoren in der chemisch-pharmazeutischen Industrie PY - 2009 SP - 1 EP - 71 AN - OPUS4-20699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hergeth, W.-D. A1 - Maiwald, Michael T1 - Trends in der Prozessanalytik: Von der Forschung zur industriellen Anwendung KW - Prozessanalytik KW - Produktqualität PY - 2009 DO - https://doi.org/10.1002/cite.200950241 SN - 0009-286X SN - 1522-2640 VL - 81 IS - 8 SP - 1098 EP - 1099 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-20258 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hergeth, W.-D. A1 - Maiwald, Michael T1 - Trends in der Prozessanalytik - Von der Forschung zur industriellen Anwendung KW - Prozessanalytik KW - Sensoren KW - Polymerisation KW - Raman-Spektroskopie PY - 2009 SN - 0947-4188 IS - 22 SP - 16 PB - GIT-Verl. CY - Darmstadt AN - OPUS4-20523 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessverständnis mit quantitativer NMR-Spektroskopie T2 - Zentralabteilung für chemische Analysen, Arbeitskolloquium CY - Jülich, Germany DA - 2009-12-04 PY - 2009 AN - OPUS4-20591 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die aktualisierte Technologie - Roadmap "Prozess-Sensoren 2015+" T2 - Arbeitskreis Prozessanalytik CY - Göttingen, Germany DA - 2009-11-20 PY - 2009 AN - OPUS4-20305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik 2009 - Stand und Tendenzen T2 - Spectaris Laborforum 2009 "Quo vadis Prozessanalytik" CY - Frankfurt am Main, Germany DA - 2009-11-10 PY - 2009 AN - OPUS4-20157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Die Sensorik von morgen N2 - Damit Prozesssensoren fit für die Zukunft werden, müssen sie robuster, genauer und dazu noch inlinefähig werden. Welche Anforderungen die Anwender noch an die Sensorik haben, geht aus der Technologie-Roadmap Prozess-Sensoren 2015+ hervor. PY - 2010 SN - 0344-1733 SN - 1610-8256 VL - 34 IS - Juni SP - 34 EP - 36 PB - Vogel CY - Würzburg AN - OPUS4-21873 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Vision oder Mission?- Wie die neue Technologie aus der Technologie- Roadmap Prozess-Sensoren 2015+ entsteht T2 - ProcessNet jahrestagung 2010 und 28. DECHAMA- Jahrestagung der Biotechnologen CY - Aachen, Germany DA - 2010-09-21 PY - 2010 AN - OPUS4-22666 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die überarbeitete Technologie-Roadmap Prozess-Sensoren 2015+ (eingeladen) T2 - Endress+Hauser Entwickler-Treffen CY - Maulburg, Germany DA - 2010-04-30 PY - 2010 AN - OPUS4-22921 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Daum, Werner T1 - Die aktualisierte Technologie-Roadmap "Prozess-Sensoren 2015+" T2 - Messe "Sensor+Test 2010" CY - Nuremberg, Germany DA - 2010-05-18 PY - 2010 AN - OPUS4-21575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Vision oder Mission? - Wie neue Technologie aus der Technologie-Roadmap Prozess-Sensoren 2015+ entsteht PY - 2010 SN - 1436-2597 VL - 13 IS - 11 SP - 21 EP - 24 PB - GIT-Verl. CY - Darmstadt AN - OPUS4-22384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Die Sensorik von morgen - Anforderungen und Entwicklungsziele zeigt die Technologie-Roadmap Prozess-Sensoren 2015+ PY - 2010 SN - 0946-2856 VL - 17 IS - 3 SP - 54 EP - 56 PB - Vogel CY - Würzburg AN - OPUS4-21043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik - Stand und Tendenzen T2 - 4. Doktorandentagung GDCh CY - Attendorn, Germany DA - 2010-02-21 PY - 2010 AN - OPUS4-22920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik - Stand und Tendenzen (eingeladen) T2 - RWTH Aachen und Aixcape CY - Aachen, Germany DA - 2010-01-27 PY - 2010 AN - OPUS4-22919 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael A1 - Daum, Werner T1 - Trends in der prozessanalytischen Messtechnik N2 - Eine gleich bleibend effektive Nutzung von Anlagen, Rohstoffen und Energie in Verbindung mit der optimalen Prozessführung sind die wichtigsten Voraussetzungen für globale Wettbewerbsvorteile der Prozessindustrie. Unternehmen aus den Bereichen Chemie, Pharmazie, Petrochemie, Gasverarbeitung, Lebensmittel-, Zellstoff-, Papier-, Glas-, Stahl- und Zementherstellung sowie ihren Zulieferern haben den Einsatz zuverlässiger Prozessautomation für eine gute Prozessführung erkannt. Überlegene Verfahren stützen sich zunehmend auf prozessanalytische Messtechnik zur Kontrolle und präventiven Sicherstellung der geforderten Produktqualität. Gleichzeitig ermöglicht sie eine ständige Verbesserung des Wissens über den Prozess und erhöhen die Prozess- und Anlagensicherheit. PY - 2011 DO - https://doi.org/10.1524/teme.2011.9026 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 78 IS - 12 SP - 547 EP - 548 PB - Oldenbourg CY - München AN - OPUS4-25262 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Daliltz, F. A1 - Cudaj, M. A1 - Maiwald, Michael A1 - Guthausen, G. T1 - Process and reaction monitoring by low-field NMR spectroscopy KW - Process analysis KW - Low-field NMR spectroscopy KW - Flow-NMR KW - Data analysis PY - 2012 DO - https://doi.org/10.1016/j.pnmrs.2011.11.003 SN - 0079-6565 SN - 1873-3301 VL - 60 SP - 52 EP - 70 PB - Elsevier CY - Amsterdam AN - OPUS4-25439 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik: Konzepte und Strategien Prozessanalytik in Flüssigkeiten (Hardwareüberblick) T2 - Prozessanalytik: Konzepte und Strategien CY - Frankfurt am Main, Germany DA - 2011-10-19 PY - 2011 AN - OPUS4-24979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Online NMR-Spektroskopie in der Prozessanalytik T2 - Seminar des Institutes für technische Chemie ( eingeladener Vortrag), Universität Stuttgart CY - Stuttgart, Germany DA - 2011-07-05 PY - 2011 AN - OPUS4-24103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - On-line NMR -Spektroskopie in der Prozessanalytik T2 - Moderne Methoden der NMR-Spektroskopie, Universität Tübingen CY - Tübingen, Germany DA - 2011-10-10 PY - 2011 AN - OPUS4-25153 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - On-line NMR-Spektroskopie in der prozessanalytik T2 - Moderne Methoden der NMR-Spektroskopie, Universität Tübingen CY - Tübingen, Germany DA - 2011-10-10 PY - 2011 AN - OPUS4-24980 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Guthausen, G. A1 - Dalitz, F. T1 - Investigations of Flow in Quantitative NMR T2 - EUROMAR2011 CY - Frankfurt am Main, Germany DA - 2011-08-21 PY - 2011 AN - OPUS4-24303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zientek, Nicolai A1 - Batzdorf, Lisa A1 - Kraume, M. A1 - Emmerling, Franziska A1 - Maiwald, Michael T1 - Online-NMR-Methoden zur Analyse des Auflösungsverhaltens von pharmazeutischen Cokristallen T2 - 8. Kolloquium Arbeitskreis Prozessanalytik CY - Berlin, Germany DA - 2012-12-03 KW - Quantitative Online-NMR-Spektroskopie KW - Cokristalle KW - Auflösungskinetik PY - 2012 SN - 978-3-9815360-1-0 N1 - Geburtsname von Batzdorf, Lisa: Tröbs, L. - Birth name of Batzdorf, Lisa: Tröbs, L. IS - P12 SP - 40 AN - OPUS4-28267 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik: Konzepte und Strategien - Prozessanalytik in Flüssigkeiten T2 - GDCh-PAT-Weiterbildungsmodul "Konzepte und Strategien" 2012 CY - Frankfurt am Main, Germany DA - 2012-10-23 PY - 2012 AN - OPUS4-27028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Prozessanalytik 2012 Stand&Tendenzen T2 - Teilchengrößenanalytik in Prozessen: Messtechniken für Emulsionen und Suspensionen CY - Potsdam, Germany DA - 2012-10-10 PY - 2012 AN - OPUS4-27029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael A1 - Bremser, Wolfram A1 - Ostermann, Markus A1 - Paul, Andrea A1 - Zientek, Nicolai T1 - Wissen über die gesamte Prozesskette N2 - Um ressourcenschonend und sicher zu produzieren, ist es erforderlich, chemische Prozesse entlang der gesamten Wertschöpfungskette zu verfolgen. Prozessanalytik muss bereits bei den Rohstoffen einsetzen und sämtliche Schritte prüfen. Dies erfordert neue Methoden und verfeinerte Messtechnik. PY - 2013 DO - https://doi.org/10.1002/nadc.201390052 SN - 1439-9598 SN - 1521-3854 VL - 61 IS - 2 SP - 149 EP - 152 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-28268 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Guthausen, G. A1 - Dalitz, F. A1 - Zientek, Nicolai A1 - Nirschl, H. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Applikationen der Medium-Resolution-NMR-Spektroskopie in der Prozessanalytik: Potenzial und Herausforderungen KW - Medium-Resolution-NMR-Spektroskopie KW - Prozessanalytik PY - 2012 SN - 0009-286X SN - 1522-2640 VL - 84 IS - 8 SP - 1364 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-28269 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Meyer, Klas A1 - Kipphardt, Heinrich T1 - Quantitative NMR spectroscopy for Gas Analysis T2 - Gas 2013 Konferenz CY - Rotterdam, Netherlands DA - 2013-06-05 PY - 2013 AN - OPUS4-29305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kloska, M. A1 - Maiwald, Michael T1 - Scharfe Überwachung der Zusammensetzung - Die Prozessanalysentechnik (PAT) feiert in diesem Jahr 100. Geburtstag N2 - Vor 100 Jahren, am 22. Mai 1913, erhielt Dr. Paul Gmelin, Mitarbeiter im physikalischen Laboratorium der Badischen Anilin und Soda Fabrik in Ludwigshafen das erste Patent auf ein Prozessanalysenmessgerät. Dieses Jubiläum würdigt CITplus mit diesem Beitrag, in dem die Autoren nicht nur die vergangene sondern auch eine mögliche künftige Entwicklung der Prozessanalysentechnik (PAT) Revue passieren lassen. PY - 2013 SN - 1436-2597 SN - 1439-0663 VL - 16 IS - 11 SP - 6 EP - 8 PB - GIT-Verl., Wiley-VCH CY - Weinheim AN - OPUS4-29600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Paul, Andrea A1 - Bremser, Wolfram A1 - Bräuer, Bastian A1 - Witting, Marcus T1 - Determination of methanol in FAME by Near Infrared Spectroscopy (NIRS) and qNMR T2 - Gas 2013 Konferenz CY - Rotterdam, Netherlands DA - 2013-06-05 PY - 2013 AN - OPUS4-29306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - 100 Jahre Prozessanalytik - Vom Pfeifenanalysator zur wissensbasierten Produktion T2 - PRORA 2013 Fachtagung Prozessnahe Röntgenanalytik CY - Berlin, Germany DA - 2013-11-21 PY - 2013 AN - OPUS4-29602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zientek, Nicolai A1 - Laurain, Clement A1 - Meyer, Klas A1 - Kraume, M. A1 - Guthausen, G. A1 - Maiwald, Michael T1 - Simultaneous 19F-1H medium resolution NMR spectroscopy for online reaction monitoring N2 - Medium resolution nuclear magnetic resonance (MR-NMR) spectroscopy is currently a fast developing field, which has an enormous potential to become an important analytical tool for reaction monitoring, in hyphenated techniques, and for systematic investigations of complex mixtures. The recent developments of innovative MR-NMR spectrometers are therefore remarkable due to their possible applications in quality control, education, and process monitoring. MR-NMR spectroscopy can beneficially be applied for fast, non-invasive, and volume integrating analyses under rough environmental conditions. Within this study, a simple 1/16'' fluorinated ethylene propylene (FEP) tube with an ID of 0.04'' (1.02 mm) was used as a flow cell in combination with a 5 mm glass Dewar tube inserted into a benchtop MR-NMR spectrometer with a 1H Larmor frequency of 43.32 MHz and 40.68 MHz for 19F. For the first time, quasi-simultaneous proton and fluorine NMR spectra were recorded with a series of alternating 19F and 1H single scan spectra along the reaction time coordinate of a homogeneously catalysed esterification model reaction containing fluorinated compounds. The results were compared to quantitative NMR spectra from a hyphenated 500 MHz online NMR instrument for validation. Automation of handling, pre-processing, and analysis of NMR data becomes increasingly important for process monitoring applications of online NMR spectroscopy and for its technical and practical acceptance. Thus, NMR spectra were automatically baseline corrected and phased using the minimum entropy method. Data analysis schemes were designed such that they are based on simple direct integration or first principle line fitting, with the aim that the analysis directly revealed molar concentrations from the spectra. Finally, the performance of 1/16'' FEP tube set-up with an ID of 1.02 mm was characterised regarding the limit of detection (LOQ (1H) = 0.335 mol L-1 and LOQ (19F) = 0.130 mol L-1 for trifluoroethanol in D2O (single scan)) and maximum quantitative flow rates up to 0.3 mL min-1. Thus, a series of single scan 19F and 1H NMR spectra acquired with this simple set-up already presents a valuable basis for quantitative reaction monitoring. KW - NMR KW - 1H KW - 19F KW - Medium-resolution NMR KW - Online NMR KW - Quantitative NMR KW - Reaction monitoring KW - Data processing KW - Process analytical technology PY - 2014 DO - https://doi.org/10.1016/j.jmr.2014.10.007 SN - 1090-7807 SN - 0022-2364 VL - 249 SP - 53 EP - 62 PB - Elsevier CY - San Diego, Calif. AN - OPUS4-32008 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Zientek, Nicolai A1 - Albrecht, Marit A1 - Meyer, Klas A1 - Tröbs, L. A1 - Paul, Andrea T1 - Multi-spectroscopic approach for the analysis of dissolution profiles of pharmaceuticals T2 - EuroPACT 2014, 3rd European Conference on Process Analytics and Control Technology CY - Barcelona, Spanien DA - 2014-05-06 PY - 2014 AN - OPUS4-31889 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Reich, O. A1 - Hass, R. T1 - "Particle size monitoring using various techniques" T2 - EuroPACT 2014, 3rd European Conference on Process Analytics and Control Technology CY - Barcelona, Spanien DA - 2014-05-06 PY - 2014 AN - OPUS4-31890 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zientek, Nicolai A1 - Maiwald, Michael A1 - Guthausen, G. T1 - NMR-Spektroskopie im Feld? Monitoring chemischer Reaktionen in der Prozesskontrolle N2 - In der Forschung wird die Kernspinresonanzspektroskopie (NMR-Spektroskopie von englisch: nuclear magnetic resonance) für die Strukturaufklärung und Quantifizierung genutzt. Eine Arbeitsgruppe an der Berliner Bundesanstalt für Materialforschung und -prüfung (BAM) und am Karlsruher Institut für Technologie (KIT) hat die Möglichkeiten untersucht, die NMR-Spektroskopie auch als Online-Methode für das Monitoring chemischer Reaktionen in der Prozesskontrolle einsetzbar zu machen. PY - 2014 SN - 1436-2597 VL - 17 IS - 12 SP - 25 EP - 26 PB - GIT-Verl. CY - Darmstadt AN - OPUS4-32434 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zientek, Nicolai A1 - Meyer, Klas A1 - Dalitz, F. A1 - Kraume, M. A1 - Guthausen, G. A1 - Maiwald, Michael T1 - Neue Möglichkeiten für die Prozessanalytik mit gekoppelter 1H- und 19F-Medium-Resolution-NMR-Spektroskopie N2 - Die Entwicklung innovativer Medium-Resolution-NMR-Spektrometer eröffnet eine Reihe bemerkenswerter Applikationen für die Qualitätskontrolle, die akademische Ausbildung und die Prozessanalytik. Die Verwendung von Permanentmagneten erlaubt den Einsatz der NMR-Spektroskopie in industriellen Prozessumgebungen. KW - NMR KW - 1H KW - 19F KW - Medium-resolution NMR KW - Online NMR KW - Quantitative NMR KW - Reaction monitoring KW - Data processing KW - Process analytical technology KW - IHM KW - PLS PY - 2014 DO - https://doi.org/10.1002/cite.201450687 SN - 0009-286X SN - 1522-2640 VL - 86 IS - 9 SP - 1575 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-32560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Zientek, Nicolai A1 - Meyer, Klas A1 - Paul, Andrea T1 - Quantitative - Online- NMR Spectroscopy: Three good arguments for a comprensive processes understanding T2 - 1. Symposium NMRPM " Quantiative NMR Methods for Reaction and Process Monitoring" CY - Kaiserslautern DA - 2015-01-15 PY - 2015 AN - OPUS4-33133 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die neue Technologie-Roadmap „Prozess-Sensoren 4.0“ – Chancen für neue Automationskonzepte N2 - Derzeit finden gravierende Veränderungen im Umfeld der Informations- und Kommunikationstechnik statt, die eine große Chance für die optimierte Prozessführung und Wertschöpfung mit darauf abgestimmten vernetzt kommunizierenden Sensoren bieten. Diese Art „smarte“ Sensoren stellen Dienste innerhalb eines Netzwerks bereit und nutzen Informationen daraus. Dieses ist die Voraussetzung für die Realisierung von Cyber Physical Systems (CPS) innerhalb zukünftiger Automatisierungskonzepte für die Prozessindustrie, wie sie auch durch das Zukunftsprojekt „Industrie 4.0“ adressiert werden. Initiiert von NAMUR und VDI/GMA und unter Mitwirkung der Unternehmen ABB, BASF, BTS, Bilfinger Maintenance, Endress+Hauser, Evonik, Festo, Krohne, Lanxess, Siemens, des Fraunhofer ICT, der HS Reutlingen und der BAM (Projektleitung) entstand jetzt die grundlegend aktualisierte und überarbeitete Technologie-Roadmap „Prozess-Sensoren 4.0“, die am 06. November 2015 auf der NAMUR-Hauptsitzung in Bad Neuenahr wurde. T2 - Sitzung des fms/ProcessNet-Gemeinschafts-Ausschusses „Sensoren und Sensorsysteme“ CY - Frankfurt am Main, Germany DA - 28.01.2016 KW - Roadmap KW - Prozess-Sensoren 4.0 KW - Sensoren KW - Industrie 4.0 PY - 2016 AN - OPUS4-35715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die neue Technologie-Roadmap "Prozess-Sensoren 4.0" - Chancen für neue Automationskonzepte N2 - Vorstellung der neuen Technologie-Roadmap "Prozess-Sensoren 4.0" T2 - Sitzung des AMA-Wissenschaftsrates CY - Saarbrücken, Germany DA - 16.03.2016 KW - Roadmap KW - Prozess-Sensoren 4.0 KW - Sensoren KW - Industrie 4.0 PY - 2016 AN - OPUS4-35716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Meyer, Klas A1 - Ruiken, Jan-Paul A1 - Paul, Andrea A1 - Kern, Simon T1 - Online NMR spectroscopy as an essential tool in a multi-spectral reaction understanding approach T2 - Panle Discussion and Workshop "Reaction Monitoring with NMR Spectroscopy" SMASH 2015 CY - Baveno, Italy DA - 2015-09-24 PY - 2015 AN - OPUS4-35162 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die neue Technologie-Roadmap "Prozess-Sensoren 4.0" - Chancen für neue Automationskonzepte T2 - ms/ProcessNet-Gemeinschafts-Ausschuss "Sensoren und Sensorsysteme" (DECHEMA) CY - Frankfurt a. M (Germany) DA - 2016-01-28 PY - 2016 AN - OPUS4-35311 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Pötter, Th. T1 - Einführung von Industrie 4.0 in der Prozessindustrie und Umsetzung der Technologie-Roadmap "Prozess-Sensoren 4.0" T2 - NAMUR Hauptsitzung 2015 CY - Bad Neuenahr, Germany DA - 2015-11-05 PY - 2015 AN - OPUS4-35161 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - Die neue Technologie-Roadmap "Prozess-Sensoren 4.0" T2 - 11. Kolloquium Prozessanalytik CY - Wien, Autria DA - 2015-11-30 PY - 2015 AN - OPUS4-35160 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zientek, Nicolai A1 - Laurain, C. A1 - Meyer, Klas A1 - Paul, Andrea A1 - Engel, D. A1 - Guthausen, G. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Automated data evaluation and modelling of simultaneous F-19-H-1 medium-resolution NMR spectra for online reaction monitoring N2 - Medium-resolution nuclear magnetic resonance spectroscopy (MR-NMR) currently develops to an important analytical tool for both quality control and processmonitoring. In contrast to high-resolution onlineNMR (HR-NMR),MR-NMRcan be operated under rough environmental conditions. A continuous re-circulating stream of reaction mixture fromthe reaction vessel to the NMR spectrometer enables a non-invasive, volume integrating online analysis of reactants and products. Here, we investigate the esterification of 2,2,2-trifluoroethanol with acetic acid to 2,2,2-trifluoroethyl acetate both by 1H HR-NMR (500MHz) and 1H and 19F MRNMR (43MHz) as amodel system. The parallel online measurement is realised by splitting the flow,which allows the adjustment of quantitative and independent flow rates, both in the HR-NMR probe as well as in the MR-NMR probe, in addition to a fast bypass line back to the reactor. One of the fundamental acceptance criteria for online MR-MNR spectroscopy is a robust data treatment and evaluation strategy with the potential for automation. The MR-NMR spectra are treated by an automated baseline and phase correction using the minimum entropy method. The evaluation strategies comprise (i) direct integration, (ii) automated line fitting, (iii) indirect hard modelling (IHM) and (iv) partial least squares regression (PLS-R). To assess the potential of these evaluation strategies for MR-NMR, prediction results are compared with the line fitting data derived from the quantitative HR-NMR spectroscopy. Although, superior results are obtained from both IHM and PLS-R for 1H MR-NMR, especially the latter demands for elaborate data pretreatment, whereas IHM models needed no previous alignment. KW - NMR KW - 1H-NMR KW - 19F-NMR KW - Medium-resolution NMR KW - Online NMR KW - Quantitative NMR KW - Reaction monitoring KW - Data processing KW - Automation KW - Process analytical technology KW - IHM KW - Indirect hard modeling KW - Chemometrics KW - PLS-R KW - Partial least squares regression PY - 2016 UR - http://onlinelibrary.wiley.com/doi/10.1002/mrc.4216/abstract DO - https://doi.org/doi:10.1002/mrc.4216 VL - 54 SP - 513 EP - 520 PB - John Wiley & Sons, Ltd CY - Hoboken, New Jersey, USA AN - OPUS4-36135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Clever und Smart - Die neuen Prozess-Sensoren 4.0 N2 - Die gravierenden Veränderungen im Umfeld der Informations- und Kommunikationstechnik beeinflussen auch die Prozessautomation und sind zugleich eine Chance. Denn die Automatisierungskonzepte gemäß Industrie 4.0 sichern den Wettbewerbsvorteil einer Volkswirtschaft. Ein zentrales Element bilden dabei smarte Sensoren, die Dienste innerhalb eines Netzwerks bereitstellen und Information daraus nutzen. Die im November 2015 vorgestellte Technologieroadmap Prozess-Sensoren 4.0 [1] zeigt Anforderungen an smarte Prozess-Sensoren auf. Der Beitrag befasst sich mit den Fragen „Was kann der Prozess-Sensor zu Industrie 4.0 beitragen?“ und „Welchen Nutzen bringt Industrie 4.0 für den Prozess-Sensor?“ KW - Technologieroadmap KW - Prozess-Sensoren 4.0 KW - Industrie 4.0 KW - Prozessanalytik PY - 2016 SN - 0178-2320 VL - 58 IS - 3 SP - 28 EP - 35 PB - DIV Deutscher Industrieverlag CY - München AN - OPUS4-35717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - qNMR-Referenzmaterialien und "Indirect Hard Modeling" (IHM) als Integrationsmethode N2 - Resolving overlapping peaks of multiple components. Relative primary analytical method - Fundamental relationship of qNMR. T2 - 4. Sitzung der Next-NMR-Arbeitsgruppe CY - Karlsruhe, Germany DA - 08.12.2015 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - Indirect Hard Modeling (IHM) KW - Referenzmaterialien PY - 2015 AN - OPUS4-36138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maiwald, Michael T1 - Die neuen Prozess-Sensoren 4.0 - Selbstdiagnose, Selbstkalibrierung und Selbstkonfiguration stehen im Fokus N2 - Heute wie morgen müssen Prozess-Sensoren zuerst die Aufgabe des Messens und der Generierung von Prozessinformationen erfüllen. Die Mess-Signale gehen in der Regel auf physikalische oder chemische Größen zurück, werden durch eine Kennlinie repräsentiert und lassen sich kalibrieren. Heute muss man dazu einen großen Aufwand betreiben, denn die physikalischen oder chemischen Informationen werden in vielen Fällen nicht direkt gemessen, sondern verbergen sich in Rohdaten, z. B. in einem optischen Spektrum. Diese Kalibrierungen können für komplexe Sensoren teilweise mehr Kostenaufwand bedeuten, als das Messgerät selbst. KW - Prozess-Sensoren KW - Prozess-Sensoren 4.0 KW - Industrie 4.0 KW - Kommunikationsstandards KW - Technologie-Roadmap PY - 2016 SN - 0947-4188 IS - 7-8 SP - 16 EP - 16 PB - Wiley-VCH Verlag GmbH & Co. KGaA AN - OPUS4-35812 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Ostermann, Markus A1 - Schmid, Thomas T1 - Process analytical technology for resource analytics – The role of reference materials N2 - Resource Analytics with the help of process analytical technology and the use of online methods is becoming increasingly important for mining and processing technologies and for the recovery of raw materials from secondary raw materials. Current online analytical methods like laser-induced breakdown spectroscopy (LIBS), X-ray fluorescence analysis (RFA), or Raman spectroscopy for the characterization of primary and secondary raw materials are increasingly being used in close association with the technologies for exploration and extraction, mechanical and metallurgical processing, as well as for recycling. Because of the complex matrices such methods are a considerable challenge at the same time. The use of reference materials, which are derived from appropriate matrices, can considerably shorten calibration and method development times. As an example, the development of an online process control method for recovery of phosphorus from sewage sludge ashes is discussed. A combination of LIBS and RFA was developed for the determination of element contents in sewage sludge ashes and their products coming from a thermo-chemical reprocessing step, which removes pollutants. T2 - Analytica Conference CY - München, Germany DA - 10.05.2016 KW - Resource Analytics KW - Ressourcenanalytik KW - Prozessanalytik KW - Process Analytical Technology PY - 2016 AN - OPUS4-36043 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - „NMR-METRONOMIE“ Die quantitative NMR-Spektroskopie (qNMR) gibt den Takt an N2 - qNMR is a pelative primary analytical method: Overview on fundamental relationships of qNMR T2 - Festkolloquium NMR-Spektroskopie (zum 25 jährigen Jubiläum der Firma Spectral Service, Köln) CY - Köln, Germany DA - 18.09.2015 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - Metrologie PY - 2015 AN - OPUS4-36140 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Schmid, Thomas T1 - Möglichkeiten zur Sonderprobenanalytik - Gemeinsame Aktivitäten mit dem Salsa-Applikationslabor der Humboldt Universität zu Berlin N2 - Troubleshooting Samples Analytics: Impurities in products: unexpected & unwanted occurrence, unknown identity, analytical method unclear, often various analytical methods, necessary, short response time important (< 1 d), benefits: allocation of its source within hours safes cost • Investigations planned, coordinated and documented by TSA team • Variety of analytical methods available T2 - 3. Analytic-City-Forum Berlin Adlershof CY - Berlin, Germany DA - 08.10.2015 KW - Troubleshooting Samples Analytics KW - TSA KW - Sonderprobenanalytik KW - Salsa KW - Applikationslabor PY - 2015 AN - OPUS4-36139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zientek, Nicolai A1 - Meyer, Klas A1 - Kern, Simon A1 - Maiwald, Michael T1 - Quantitative online NMR spectroscopy in a nutshell N2 - Online NMR spectroscopy is an excellent tool to study complex reacting multicomponent mixtures and gain process insight and understanding. For online studies under process conditions, flow NMR probes can be used in a wide range of temperature and pressure. This paper compiles the most important aspects towards quantitative process NMR spectroscopy in complex multicomponent mixtures and provides examples. After NMR spectroscopy is introduced as an online method and for technical samples without sample preparation in deuterated solvents, influences of the residence time distribution, pre-magnetization, and cell design are discussed. NMR acquisition and processing parameters as well as data preparation methods are presented and the most practical data analysis strategies are introduced. KW - Prozessanalytik KW - Process analytical technology KW - Online NMR spectroscopy KW - Online monitoring PY - 2016 DO - https://doi.org/10.1002/cite.201500120 SN - 0009-286X VL - 88 IS - 6 SP - 698 EP - 709 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim, Germany AN - OPUS4-36333 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Paul, Andrea A1 - Carl, Peter A1 - Westad, Frank A1 - Voss, J.-P. A1 - Maiwald, Michael T1 - Towards process spectroscopy in complex fermentation samples and mixtures N2 - Supernatants from a fermentation process of Pichia pastoris were investigated by Raman spectroscopy. Using partial least squares regression, the principal substrates glycerol and methanol could be predicted, however not the expressed protein. To gain further insight, a priori prepared calibration samples were studied by vibrational-, UV/Vis-, and fluorescence spectroscopy. For the quantification of glycerol and methanol, Raman spectroscopy was identified as the most sensitive technique, and superior to near-infrared spectroscopy, but not for protein contents below 1 g L–1. Both UV/Vis absorption and fluorescence spectroscopy are well suited for the quantification of protein, however, best results were obtained with UV/Vis absorption. KW - Fluorescence KW - NIR spectroscopy KW - Partial least squares regression KW - Pichia pastoris KW - Raman spectroscopy KW - UV/VIS spectroscopy PY - 2016 DO - https://doi.org/10.1002/cite.201500118 SN - 0009-286X SN - 1522-2640 VL - 88 IS - 6 SP - 756 EP - 763 PB - WILEY-VCH Verlag GmbH & Co. KGaA CY - Weinheim, Germany AN - OPUS4-36755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Resch-Genger, Ute A1 - Maiwald, Michael T1 - Analytical Sciences an der BAM N2 - Die Bundesanstalt für Materialforschung und -prüfung (BAM) ist eine wissenschaftlich technische Bundesoberbehörde im Geschäftsbereich des Bundesministeriums für Wirtschaft und Energie (BMWi), die über einen gesetzlichen Auftrag für die Sicherheit in Technik und Chemie verfügt und auf nahezu 150 Jahre zurückblicken kann. Vor diesem Hintergrund forscht, entwickelt, und prüft die BAM in den fünf Themenfeldern Energie, Infrastruktur, Umwelt, Material und Analytical Sciences mit einer unikalen Vielfalt an analytischen Methoden. KW - BAM KW - Analytik KW - Analytical Sciences PY - 2016 SN - 0939-0065 IS - 2 SP - 6 EP - 8 AN - OPUS4-36508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kern, Simon A1 - Meyer, Klas A1 - Paul, Andrea A1 - Maiwald, Michael T1 - Ugly Spectra and Lousy interfaces – Challenges for Compact NMR Spectroscopy in Process Control N2 - With the introduction of advanced process analytical technology, the closeness of key process variables to their limits can be directly controlled and the product can be classified or even released in real time. Compact NMR instruments can make NMR spectroscopy accessible in industrial and harsh environments for process control. T2 - ProcessNet-Jahrestagung und 32. DECHEMA-Jahrestagung der Biotechnologen 2016 CY - Aachen, Germany DA - 12.09.2016 KW - Online NMR Spectroscopy KW - Smart Sensors KW - Industrie 4.0 KW - Reaction Monitoring PY - 2016 UR - http://onlinelibrary.wiley.com/doi/10.1002/cite.201650243/full DO - https://doi.org/10.1002/cite.201650243 SN - 1522-2640 VL - 88 SP - 1304 EP - 1317 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-37317 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael T1 - qNMR metrology and "primary" references N2 - qNMR provides the most universally applicable form of direct purity determination without need for reference materials of impurities or the calculation of response factors but only exhibiting suitable NMR properties. The development of CRMs addressing qNMR specific measurement issues will give analysts compounds ideally suited for the analytical method and also provide full characterisation of qNMR related parameters to enable more realistic uncertainty budgets. These materials will give users the tools to exploit qNMR more easily and enable them to speed up analytical method development and reduce the time and financial burden of multiple analytical testing. T2 - First qNMR Foundation Meeting CY - Köln, Germany DA - 10.06.2016 KW - qNMR KW - Quantitative NMR-Spektroskopie KW - purity KW - Referenzmaterialien KW - Reference Material PY - 2016 AN - OPUS4-36450 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer, Klas A1 - Ruiken, J.-P. A1 - Illner, M. A1 - Paul, Andrea A1 - Müller, D. A1 - Esche, E. A1 - Repke, J.-U. A1 - Maiwald, Michael T1 - Prozessanalytik für die moderne Verfahrenstechnik – Online-NMR- und -Raman-Spektroskopie im mizellaren Stoffsystem N2 - Homogen katalysierte Reaktionen sind wichtige Werkzeuge der chemischen Industrie. Milde Reaktionsbedingungen und hohe Selektivitäten führen zu einer energie- und ressourcenschonenden Produktion. Ein bedeutender Prozessschritt ist die Hydroformylierung. Hier kommen Kobalt- und Rhodiumkomplexe mit mehrzähnigen Liganden zum Einsatz, die zumeist in wässriger Lösung vorliegen. Die Anwendbarkeit beschränkt sich demnach auf kurzkettige Edukte mit hinreichender Wasserlöslichkeit. T2 - ProcessNet-Jahrestagung und 32. DECHEMA-Jahrestagung der Biotechnologen 2016 CY - Aachen, Germany DA - 12.09.2016 KW - Hydroformylierung KW - Prozessanalytik KW - Prozess-Spektroskopie KW - NMR-Spektroskopie KW - Raman-Spektroskopie KW - Mizellen PY - 2016 UR - http://onlinelibrary.wiley.com/doi/10.1002/cite.201650219/epdf DO - https://doi.org/10.1002/cite.201650219 SN - 1522-2640 VL - 88 SP - 1304 EP - 1317 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-37316 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Askar, Enis A1 - Günzel, Stephan A1 - Holtappels, Kai A1 - Mair, Georg A1 - Orellana Pérez, Teresa A1 - Sobol, Oded A1 - Tiebe, Carlo T1 - Competence Centre H2Safety@BAM – Safeguarding the Quality Infrastructure in the Hydrogen Economy N2 - Hydrogen is a central component of the energy transition and the European Green Deal for a climate-neutral Europe. To achieve the goals defined for 2050, the EU and the German government have developed a framework for action and are making long-term investments in research, development, and the rapid implementation of innovative hydrogen technologies. With the Competence Centre "H2Safety@BAM", BAM is creating the safety-related prerequisites for the successful implementation of hydrogen technologies at national as well as European level. To this end, BAM conducts research, testing and consulting in a holistic and inter-disciplinary manner under one roof – in the Competence Centre H2Safety@BAM. The activities of the competence centre focus on ensuring the safety of infra-structures, plants, and processes as well as innovative hydrogen transport and storage systems based on digital quality testing and the experimental testing of components and systems. It thus creates the prerequisites for the implementation and adaptation of legal framework conditions as well as for standardization. Closely related to this are investigations into the properties and compatibility of metallic materials and polymers as well as friction systems for the safe operation of components, plants, processes, and systems. This interdisciplinary and holistic approach is complemented by the development of gas analytics and suitable sensors, online measurements of gas properties in process control, test scenarios under real conditions as well as impact assessments of accidents and risk assessments and risk management systems derived from them. With its portfolio of tasks and competences, BAM builds trust in the safety and reliability of technical system solutions for hydrogen. T2 - 772. WE-Heraeus-Seminar - Metrology and Process Safety for Hydrogen Technologies & Applications CY - Bad Honnef, Germany DA - 10.10.2022 KW - H2Safety@BAM KW - Hydrogen KW - Competence Center KW - Hydrogen Strategy KW - Green Deal KW - Safety KW - Risk Assessment KW - Quality Infrastructure PY - 2022 UR - https://www.we-heraeus-stiftung.de/veranstaltungen/metrology-and-process-safety-for-hydrogen-technologies-and-applications/ AN - OPUS4-55986 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Emmerling, Franziska A1 - Villajos Collado, José Antonio A1 - Maierhofer, Christiane A1 - Thiel, Erik A1 - Altenburg, Simon T1 - Already producing or still assembling? – Perspectives towards modular production and quality control in a digitized process industry N2 - The CLEAN ENERGY Flagship is an initiative designed to utilize recent game changing developments in digital, materials and manufacturing technologies to catalyze a radical paradigm shift towards clean, reliable, efficient and cost-optimal energy. Unifying and drastically accelerating radically new energy material design, processing and integration across the entire value chain addressing energy production, conversion, storage and systems. CLEAN ENERGY participants are all distinguished research organisations that each benefit from their own industry networks and contacts with regions and state-level activities and have a long history of collaborating with each other (for 10 years now under the umbrella of EERA) within a European collaborative framework. Through EERA, CLEAN ENERGY aims to become a crucial partner in the SET-Plan, supporting long-lasting approaches through its established networks and internal collaborations. T2 - Clean Energy Workshop on Autonomous Materials Development Platforms CY - Brussels, Belgium DA - 02.10.2018 KW - Digitization KW - Energy production KW - Energy storage KW - Energy systems KW - Clean energy technology PY - 2018 AN - OPUS4-46135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tiebe, Carlo A1 - Mieller, Björn A1 - Maiwald, Michael A1 - Kipphardt, Heinrich A1 - Tuma, Dirk A1 - Prager, Jens A1 - Schukar, Marcus A1 - Strohhäcker, J. T1 - Sensoren und Analytik für Sicherheit und Prozesskontrolle in Wasserstofftechnologien N2 - Die Nutzung von Sensortechnologien, insbesondere im Bereich der Gasdetektion mit einem Schwerpunkt auf Wasserstoff, spielt eine entscheidende Rolle in verschiedenen Anwendungsbereichen der Wasserstofftechnologie. Sicherheitsüberwachung, Leckdetektion und Prozesskontrolle gehören zu den prominenten Anwendungsgebieten dieser Sensortechnologien. Ein zentrales Ziel ist die Erkennung von freigesetztem Wasserstoff sowie die genaue Bestimmung des Wasserstoff-Luftverhältnisses mithilfe von Gassensoren. Dies ist von entscheidender Bedeutung, um potenzielle Gefahren frühzeitig zu erkennen und angemessene Maßnahmen zu ergreifen. Ein weiterer Schwerpunkt dieses Beitrags liegt auf der Analytik und der Verwendung zertifizierter Referenzmaterialien in Verbindung mit Metrologie für die Wasserstoffspeicherung. Dies gewährleistet eine präzise und zuverlässige Charakterisierung von Wasserstoff und unterstützt die Entwicklung sicherer Speichertechnologien. Im Rahmen des Euramet-Vorhabens Metrology for Advanced Hydrogen Storage Solutions (MefHySto) wird eine Kurzvorstellung präsentiert. Der Vortrag stellt zwei zerstörungsfreie Prüfverfahren zum strukturellen Zustandsüberwachung (Structural Health Monitoring, SHM) für Wasserstofftechnologien vor. Insbesondere die Fehlstellenerkennung mittels geführter Ultraschallwellen spielt eine bedeutende Rolle bei der Lebensdauerüberwachung von Wasserstoffspeichern. Ein weiterer Aspekt ist die Anwendung faseroptischer Sensorik zur Schadensfrüherkennung von Wasserstoffspeichern. Diese zerstörungsfreien Prüfverfahren ermöglichen eine präzise und frühzeitige Identifizierung von Schäden, was die Sicherheit und Effizienz von Wasserstoffspeichersystemen entscheidend verbessert. T2 - DVGW Kongress H2 Sicherheit CY - Online meeting DA - 15.11.2023 KW - H2Safety@BAM KW - Gassensorik KW - Metrologie KW - zertifizierte Referenzmaterialien KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Faseroptik PY - 2023 AN - OPUS4-59230 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - van der Hout, J. W. A1 - van der Veen, A. M. H. A1 - Ziel, P. R. A1 - Kipphardt, Heinrich A1 - Tuma, Dirk A1 - Maiwald, Michael A1 - Fernández, T. E. A1 - Gómez, C. A1 - Cieciora, D. A1 - Ochman, G. A1 - Dias, F. A1 - Silvino, V. A1 - Macé, T. A1 - Sutour, C. A1 - Marioni, F. A1 - Ackermann, A. A1 - Niederhauser, B. A1 - Fükő, J. A1 - Büki, T. A1 - Szilágyi, Z. N. A1 - Tarhan, T. A1 - Engin, E. T1 - International Comparison Euramet.QM-K111 – Propane in Nitrogen N2 - This key comparison aims to assess the core capabilities of the participants in gas analysis. Such competences include, among others, the capabilities to prepare Primary Standard gas Mixtures (PSMs), perform the necessary purity analysis on the materials used in the gas mixture preparation, the verification of the composition of newly prepared PSMs against existing ones, and the capability of calibrating the composition of a gas mixture. According to the Strategy for Key Comparisons of the Gas Analysis Working Group, this key comparison is classified as an RMO track A key comparison. The artefacts were binary mixtures of propane in nitrogen at a nominal amount-of-substance fraction level of 1000 μmol/mol. The values and uncertainties from the gravimetric gas mixture preparation were used as key comparison reference values (KCRVs). Each transfer standard had its own KCRV. The results are generally good. All results are within ± 1 % of the KCRV. KW - EURAMET.QM-K111 KW - Propane in nitrogen PY - 2017 DO - https://doi.org/10.1088/0026-1394/54/1A/08020 SN - 0026-1394 VL - 54 IS - Technical Supplement SP - 08020, 1 EP - 34 PB - IOP Science AN - OPUS4-44471 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kipphardt, Heinrich A1 - Tuma, Dirk A1 - Khanipour, Peyman A1 - Maiwald, Michael T1 - Voll normal - Normen in der Gasanalytik N2 - In dieser Arbeit werden die Grundlagen der Normung, die Entstehung einer Norm und die für die Gasanalytik relevanten Normungsgremien kurz dargestellt. Dazu werden die wichtigsten Normen zur Gasanalytik entlang des analytischen Prozesses gruppiert und aufgeführt. Schließlich wird als Anwendungsbeispiel aus der eigenen Praxis der Prozess von der Herstellung bis zur Zertifizierung eines Kalibriergases beschrieben. KW - Zertifikat KW - Regel- und Messtechnik KW - Normung KW - Gasanalytik KW - Gasgualität KW - Gasreinheit PY - 2022 SN - 2366-9594 VL - 10 SP - 73 EP - 80 PB - Vulkan Verlag CY - Essen AN - OPUS4-56083 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Michalik-Onichimowska, Aleksandra A1 - Kern, Simon A1 - Riedel, Jens A1 - Panne, Ulrich A1 - King, R. A1 - Maiwald, Michael T1 - ‘‘Click” analytics for ‘‘click” chemistry – A simple method for calibration–free evaluation of online NMR spectra N2 - Driven mostly by the search for chemical syntheses under biocompatible conditions, so called "click" chemistry rapidly became a growing field of research. The resulting simple one-pot reactions are so far only scarcely accompanied by an adequate optimization via comparably straightforward and robust analysis techniques possessing short set-up times. Here, we report on a fast and reliable calibration-free online NMR monitoring approach for technical mixtures. It combines a versatile fluidic system, continuous-flow measurement of 1H spectra with a time interval of 20 s per spectrum, and a robust, fully automated algorithm to interpret the obtained data. As a proof-of-concept, the thiol-ene coupling between N-boc cysteine methyl ester and allyl alcohol was conducted in a variety of non-deuterated solvents while its time-resolved behaviour was characterized with step tracer experiments. Overlapping signals in online spectra during thiol-ene coupling could be deconvoluted with a spectral model using indirect hard modeling and were subsequently converted to either molar ratios (using a calibrationfree approach) or absolute concentrations (using 1-point calibration). For various solvents the kinetic constant k for pseudo-first order reaction was estimated to be 3.9 h-1 at 25 °C. The obtained results were compared with direct integration of non-overlapping signals and showed good agreement with the implemented mass balance. KW - Online NMR Spectroscopy KW - Reaction Monitoring KW - Automated Data Evaluation KW - Thiol-ene click chemistry KW - Click Chemistry KW - Process Analytical Technology PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-393232 UR - http://www.sciencedirect.com/science/article/pii/S1090780717300575 DO - https://doi.org/10.1016/j.jmr.2017.02.018 VL - 277 SP - 154 EP - 161 PB - Elsevier Inc. CY - Oxford AN - OPUS4-39323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meyer, Klas A1 - Rademann, K. A1 - Panne, Ulrich A1 - Maiwald, Michael T1 - Quantitative NMR spectroscopy for gas analysis for production of primary reference gas mixtures N2 - Due to its direct correlation to the number of spins within a sample quantitative NMR spectroscopy (qNMR) is a promising method with absolute comparison abilities in complex systems in technical, as well as metrological applications. Most of the samples studied with qNMR are in liquid state in diluted solutions, while gas-phase applications represent a rarely applied case. Commercially available NMR equipment was used for purity assessment of liquid and liquefied hydrocarbons serving as raw materials for production of primary reference gas standards. Additionally, gas-phase studies were performed within an online NMR flow probe, as well as in a high-pressure NMR setup to check feasibility as verification method for the composition of gas mixtures. KW - Quantitative NMR spectroscopy KW - Gas-phase NMR spectroscopy KW - Primary reference gas mixtures PY - 2017 UR - http://www.sciencedirect.com/science/article/pii/S1090780716302518 DO - https://doi.org/10.1016/j.jmr.2016.11.016 SN - 1090-7807 SN - 1096-0856 VL - 275 SP - 1 EP - 10 AN - OPUS4-38803 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zientek, Nicolai A1 - Meyer, Klas A1 - Panne, Ulrich A1 - Kraume, M. A1 - Maiwald, Michael T1 - Untersuchung der Auflösungskinetik von pharmazeutischen Cokristallen mittels Onlilne-NMR-Spektroskopie N2 - Bei der Entwicklung pharmazeutischer Wirkstoffe werfen Substanzen mit einer geringen Löslichkeit, Auflösungsrate und damit einhergehend schlechten Bioverfügbarkeit immer größere Probleme auf. Diese Eigenschaften und nicht etwa toxikologische Eigenschaften oder schlechte Wirksamkeit sorgen dafür, dass es weniger als 1 % aller Wirkstoffe bis in die Markteinführung schaffen. Eine Reihe von Ansätzen zur Verbesserung der schlechten Wasserlöslichkeit konnten bereits etabliert werden. Hierunter zählen die gezielte Salzbildung bzw. Salzscreening, Solubilisierung mit Cosolventien oder die Nutzung von Polymeren als mögliche Transportwege. Eine weitere Möglichkeit bietet die Bildung verschiedener polymorpher Formen, sowohl der Einzelkomponente als auch von den verschiedenen Mehrkomponentenverbindungen. T2 - 7. Interdisziplinäres Doktorandenseminar CY - Berlin, Germany DA - 24.02.2013 KW - Quantitative Online-NMR-Spektroskopie KW - Pharmazeutische Cokristalle PY - 2013 SN - 978-3-9815360-9-6 SP - 9 EP - 11 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) AN - OPUS4-28266 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Oudwater, R. J. A1 - van Wijk, J. I. T. A1 - Persijn, S. A1 - Wessel, R. M. A1 - van der Veen, A. M. H. A1 - Mace, T. A1 - Sutour, C. A1 - Couette, J. A1 - Milton, M. A1 - Harling, A. A1 - Vargha, G. A1 - Uprichard, I. A1 - Haerri, H.-P. A1 - Niederhauser, B. A1 - Tuma, Dirk A1 - Maiwald, Michael A1 - Boissière, Claudia T1 - Final report on EURAMET QM-S8: Analysis of impurities in pure and balance gases used to prepare primary standard gas mixtures by the gravimetric method N2 - This project concerns the purity analysis of nitrogen as used in reference gas mixture preparation. This project was carried out without adding impurities to the gas used for this comparison, and is therefore more representative to evaluate the analysis of CO, CO2, CH4, O2, Ar and H2O impurities in high purity nitrogen. The analysis of the amount–of–substance fraction water was optional. Two 50 litre high purity nitrogen cylinders were purchased from a well-qualified supplier of specialty gases. The listed components were expected to be present in the pure nitrogen at the target levels as a result of the purification of the nitrogen. From the start of this comparison it was clear that the comparison may not lead to reference values for the constituents analysed. The results indicate that analyses of high purity gases are often limited by the limits of detection of analytical equipment used. The reports of the participating laboratories also indicate that there is no agreed method of determination of the uncertainty on a detection Limit value. The results provide useful information on the Performance of participants. For all analysed components there is reasonable agreement in results for LNE, VSL, Metas and NPL. For BAM only the Argon result is in agreement. KW - Gas analysis KW - Nitrogen KW - Purity analysis PY - 2013 DO - https://doi.org/10.1088/0026-1394/50/1A/08023 SN - 0026-1394 SN - 1681-7575 VL - 50 IS - 08023 SP - 1 EP - 58 PB - Institute of Physics Publishing CY - Bristol AN - OPUS4-35896 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kern, Simon A1 - Michalik-Onichimowska, Aleksandra A1 - Riedel, Jens A1 - Panne, Ulrich A1 - King, R. A1 - Maiwald, Michael T1 - “Click” analytics for “click” chemistry – a simple method for calibration-free evaluation of online NMR spectra N2 - Currently research in chemical manufacturing moves towards flexible plug-and-play approaches focusing on modular plants, capable of producing small scales ondemand with short down-times between individual campaigns. This approach allows for efficient use of hardware, a faster optimization of the process conditions, and thus, an accelerated introduction of new products to the market. Driven mostly by the search for chemical syntheses under biocompatible conditions, so-called “click” chemistry rapidly became a growing field of research. The resulting simple one-pot reactions are so far only scarcely accompanied by an adequate optimization via comparably straightforward and robust analysis techniques. Here we report on a fast and reliable calibration-free online high field NMR monitoring approach for technical mixtures. It combines a versatile fluidic system, continuous-flow measurement with a time interval of 20 s per spectrum, and a robust, automated algorithm to interpret the obtained data. All spectra were acquired using a 500 MHz NMR spectrometer (Varian) with a dual band flow probe having a 1/16 inch polymer tubing working as a flow cell. Single scan 1H spectra were recorded with an acquisition time of 5 s, relaxation delay of 15 s. As a proof-of-concept, the thiol-ene coupling between N-boc cysteine methyl ester and allyl alcohol was conducted in non-deuterated solvents while its time-resolved behaviour was characterised with step tracer experiments Through the application of spectral modeling the signal area for each reactant can be deconvoluted in the online spectra and thus converted to the respective concentrations or molar ratios. The signals which were suitable for direct integration were used herein for comparison purposes of both methods. T2 - 4th European Conference on Process Analytics and Control Technology (EuroPACT 2017) CY - Potsdam, Germany DA - 10.05.2017 KW - Online NMR Spectroscopy KW - Process Analytical Technology KW - Click Chemistry KW - Reaction Monitoring KW - Process control KW - Indirect Hard Modeling KW - Spectral Modeling PY - 2017 SP - 156 EP - 157 CY - Frankfurt a. M. AN - OPUS4-40232 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Bornemann-Pfeiffer, Martin A1 - Guhl, Svetlana A1 - Kern, Simon A1 - Meyer, Klas A1 - Panne, Ulrich A1 - Riedel, Jens A1 - Wander, Lukas T1 - Integrated and networked systems and processes – A perspective for digital transformation of our chemical and pharmaceutical production N2 - Chemical and pharmaceutical companies have to find new paths to survive successfully in a changing environment, while also finding more flexible ways of product and process development to bring their products to market more quickly – especially high-quality high-end products like fine chemicals or pharmaceuticals. The potential of digital technologies belongs to these. A current approach uses flexible and modular chemical production units, which can produce different high-quality products using multi-purpose equipment with short downtimes between campaigns and reduce the time to market of new products. At the same time, we need to move towards knowledge-based production that takes into account all essential equipment, process and control data from plants and laboratories and makes valuable expertise available and transferable. The potential of data from production together with its contextual information is often not yet consistently used today for a comprehensive understanding of production. By giving examples this paper outlines a possible more holistic approach to digitalisation and the use of machine-based methods in the production of specialty chemicals and pharmaceuticals through the introduction of integrated and networked systems and processes. T2 - GDCh Science Forum 2021 - GDCh Wissenschaftsforum 2021 CY - Online meeting DA - 29.08.2021 KW - Process analytical technology KW - Online NMR spectroscopy KW - Process industry KW - Industry 4.0 KW - Digital transformation KW - Autonomous chemistry PY - 2021 AN - OPUS4-53171 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maiwald, Michael A1 - Heine, Hans-Joachim A1 - Hedrich, Martina A1 - Panne, Ulrich T1 - Referenzgase für die Analytik - zwischen Referenzmaterial und Klimawandel T2 - ANAKON 2009 CY - Berlin, Germany DA - 2009-03-17 PY - 2009 AN - OPUS4-20679 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -