TY - CONF A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Ganzheitliche Bewertung der Einsatzmöglichkeiten von Sekundärrohstoffen in Beton T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 295 EP - 307 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25174 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Christian A1 - Fontana, Patrick A1 - Müller, Urs A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Entwicklung von C-S-H-Phasen in autoklaviertem Ultra-Hochleistungs-Beton (UHPC) T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 25 EP - 32 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vasilic, Ksenija A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Roussel, N. ED - Rogge, A. ED - Meng, B. T1 - Modelling of fresh SCC flow through reinforced sections T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 50 EP - 57 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Neue Erkenntnisse und Analysemethoden zum Phasenbestand und Gefüge des Zementsteins T2 - 52.DAfStb-Forschungskolloquium, BAM CY - Berlin, Germany DA - 2011-11-07 PY - 2011 AN - OPUS4-25226 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fontana, Patrick A1 - Meng, Birgit A1 - Hillemeier, B. T1 - Frühe autogene Verformungen von HPC - Beurteilung des plastischen Schwindens und spannungsinduzierender Verformungen durch Korrelation mit der Hydratationskinetik N2 - Der Einfluß der Mischungszusammensetzungen auf das frühe autogene Schwinden der Bindemittelmatrix von Hochleistungsbetonen wurde durch Korrelation mit der Hydratationskinetik untersucht. Durch die Analyse der Verformungsgeschwindigkeiten konnte eine Unterscheidung zwischen plastischen und spannungsinduzierenden Verformungen vorgenommen werden. T2 - 45. Forschungskolloquium des DAfStb CY - Wien, Österreich DA - 06.10.2005 KW - Hochleistungsbeton KW - Autogenes Schwinden KW - Hydratation KW - Porenstruktur PY - 2005 SN - 0005-9900 SN - 1437-1006 VL - 100 SP - 57 EP - 60 PB - Ernst CY - Berlin AN - OPUS4-11177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Maier, Bärbel A1 - Maultzsch, Matthias A1 - Meng, Birgit A1 - Meinhold, Uwe T1 - Verification of the suitability of shotcrete on low strength concrete surfaces T2 - 10th International Conference on Durability of Building Materials and Components (DBMC) CY - Lyon, France DA - 2005-04-17 KW - Hydraulic engineering structures KW - Low strength concrete KW - Repair systems KW - Performance tests PY - 2005 SP - 8 pages CY - Lyon AN - OPUS4-7413 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Pliett, H. A1 - Wenzel, F. A1 - Meng, Birgit T1 - A sustainable approach for the conservation of the Timur Shah Mausoleum in Kabul, Afghanistan T2 - 10th International Conference on Durability of Building Materials and Components (DBMC) CY - Lyon, France DA - 2005-04-17 PY - 2005 SP - 1 EP - 8(?) CY - Lyon AN - OPUS4-7411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Fontana, Patrick A1 - Meng, Birgit T1 - BAM-Division VII.1 Building Materials: Main Expertise/NANOCEM Partner Project T2 - Nanocem Open meeting CY - Morges, Switzerland DA - 2005-04-29 PY - 2005 AN - OPUS4-7420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Meng, Birgit A1 - Habel, Wolfgang A1 - Wagenknecht, E. A1 - Hillemeier, B. T1 - Measurement of viscoelastic properties of cement pastes with oscillation rheometry T2 - 24th conference on Cement and Concrete Science CY - Warwick, England, UK DA - 2004-09-16 KW - Cement paste KW - Oscillation rheometry KW - Viscoelastic properties PY - 2004 SP - 1(?) EP - 4(?) AN - OPUS4-11178 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Vermeidung stofflicher Probleme bei der Wärmebehandlung von Beton T2 - "Beton für alle Wetter" Fachseminar CY - Berlin, Germany DA - 2005-11-24 PY - 2005 AN - OPUS4-11473 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - MODINSYS modular systems for the protection and repair of concrete structures T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC KW - Repair mortar KW - Modular systems KW - Concrete rehabilitation PY - 2010 SN - 978-972-99179-4-3 SP - 697 EP - 704 CY - Funchal-Madeira, Portugal AN - OPUS4-20937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Müller, Urs A1 - Meng, Birgit A1 - Rübner, Katrin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Analysis of solid components and their ratios in reinforced concrete structures KW - Concrete analysis KW - Concrete petrography KW - Optical microscopy KW - Scanning electron microscopy KW - Micro X-ray fluorescence analysis PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 9 SP - 180 EP - 197 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21050 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Bürgisser, Philip A1 - Weise, Frank A1 - Meng, Birgit ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - The natural pozzolana 'Rhenish trass' and its effect on ASR in concrete T2 - CONSEC’10 - 6th International conference on concrete under severe conditions - Environment and loading CY - Mérida, Yucatán, México DA - 2010-06-07 KW - AKR KW - Beton KW - Natürliche Pozzolane PY - 2010 SN - 978-0-415-59316-8 SP - 313 EP - 320 PB - Taylor & Francis AN - OPUS4-21969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit ED - Brameshuber, W. T1 - Reactivity of mineral additions in autoclaved UHPC T2 - International Conference on Material Science and 64th RILEM Annual week CY - Aachen, Germany DA - 2010-09-06 KW - UHPC KW - Autoklavierung KW - Mikrostruktur KW - Festigkeit KW - Phasenzusammensetzung KW - Forschung und Entwicklung PY - 2010 SN - 978-2-35158-110-0 VL - III IS - PRO 77 SP - 69 EP - 77 PB - RILEM Publications AN - OPUS4-21970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Müller, Urs ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Investigating the original water content of concrete N2 - This chapter provides an overview of methods that are commonly used for the analysis of the original water content of fresh and hardened concrete. The methods consist of direct methods, which detect the water content or the water/cement ratio primarily, as well as indirect methods, which measure other material characteristics related to the water content. KW - Concrete analysis KW - Water content KW - Water/cement ratio KW - Pore structure analysis PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 11 SP - 217 EP - 241 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21814 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Jakubcová, Petra A1 - Schnell, A. A1 - Rübner, Katrin A1 - Müller, A. A1 - Meng, Birgit T1 - Nutzung von Bau- und Abbruchabfällen zur Herstellung von Recyclinggranulaten T2 - Tagung Bauchemie der GDCh-Fachgruppe Bauchemie 2010 CY - Dortmund, Deutschland DA - 2010-10-07 KW - Sekundärrohstoffe KW - Sekundäre Gesteinskörnung KW - Recycling PY - 2010 SN - 978-3-936028-65-2 VL - 42 SP - 129 EP - 136 AN - OPUS4-22444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit ED - Teipel, U. ED - Schmidt, R. T1 - Ganzheitliche Eignungsbewertung potenzieller Recyclingbereiche für Mauerwerksbruch N2 - Unsere Industriegesellschaft ist auf den ständigen Abbau und Verbrauch von Rohstoffen und Energie angewiesen. Der Bausektor zählt dabei zu den größten Verursachern von Stoffströmen in Deutschland. Zum einen ist das Bauen mit einem hohen Bedarf an materiellen und energetischen Ressourcen sowie finanziellen Aufwendungen verbunden. Zum anderen sind nahezu 50 % des deutschen Abfallaufkommens dem Bausektor zuzurechnen, Die Beschränktheit natürlicher Ressourcen, die zunehmenden negativen Umweltauswirkungen sowie die Verteuerung und Verknappung von Deponieraum führten in den letzten Jahren zu einem Umdenken in der Bau- und Abfallwirtschaft hin zu einer Kreislaufwirtschaft. Im Sinne einer nachhaltigen Kreislaufwirtschaft sind die im Bausektor anfallenden Restmassen zukünftig möglichst einem Recycling zuzuführen. Bei der Wahl der geeigneten Recyclingoption spielen technische, ökologische und ökonomische Fragestellungen eine Rolle. Für den Bereich Mauerwerksrecycling existiert bisher keine umfassende Methodik zur ganzheitlichen Eignungsbewertung (Technik, Ökologie, Ökonomie) mit einem vertretbaren Arbeitsaufwand. Grundlegende strukturierte und strukturierende Informationen für das Recycling von Mauerwerksbruch fehlen bislang. Aus diesem Grunde wird derzeit mit dem Ziel eines möglichst hochwertigen Mauerwerksrecyclings eine umfassende und praxisorientierte Methodik entwickelt. Diese Methodik soll eine ganzheitliche Eignungsbewertung unterschiedlicher potenzieller Recyclingbereiche für Mauerwerksbruch ermöglichen. Im vorliegenden Beitrag werden erste Ansätze dieser Bewertungsmethode vorgestellt. T2 - 2. Symposium "Rohstoffeffizienz und Rohstoffinnovationen" CY - Nürnberg, Germany DA - 10.02.2011 PY - 2011 SN - 978-3-8396-0222-5 VL - 2 SP - 153 EP - 165 PB - Fraunhofer Verlag AN - OPUS4-23255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Assessment-concept for the sustainable use of secondary aggregates in concrete T2 - International Conference (RILEM-Week) on Advances in Construction Materials through Science and Energineering CY - Hong Kong, China DA - 2011-09-05 PY - 2011 AN - OPUS4-24470 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Selleng, Christian A1 - Meng, Birgit A1 - Fontana, Patrick ED - Fehling, E. ED - Middendorf, B. ED - Thiemicke, J. T1 - Phase composition and strength of thermally treated UHPC N2 - Thermal treatment improves the excellent properties of UHPC. Recent studies have shown that an increase in compressive strength of more than 30 % is possible. However, the accurate conditions of thermal treatment for a maximal strength are considered as yet undetermined. A multitude of parameters can be varied: temperature, pressure, water saturation, and duration of the process steps. These parameters influence the phase development and in consequence the macroscopic properties of UHPC. The primary objective of the presented study was the optimisation of the conditions for thermal treatment, concerning compressive strength. It focuses on pre-storage time and duration of the treatment at defined temperatures and pressures (90 °C and 185 °C/1.1MPa). As expected, experimental results showed a fundamental change of phase composition in hydrothermally treated UHPC in comparison to standard cured UHPC: Ettringite decomposes at higher temperatures and is absent after thermal treatment; the amount of portlandite and clinker phases decreases. The change of phase composition is accompanied by increased compressive strength. Experimental studies of calcium-silicate-systems at hydrothermal conditions predict the formation of the crystalline C-S-H phase tobermorite. In fact, this is a typical phase occurring in other hydrothermally treated calcium-silicate-systems like Autoclaved Aerated Concrete (AAC). Commonly, high strength is attributed to the presence of tobermorite; however, in the presented study tobermorite was not detected in the hydrothermally treated UHPC. Therefore, tobermorite cannot be responsible for the increased strength of hydrothermally treated UHPC. In conclusion the development of phases and strength of UHPC at hydrothermal conditions differs fundamentally from AAC and the experimental studies with water saturation. Results of these systems cannot be transferred to UHPC. In thermally treated UHPC, the hydration of clinker is enhanced and the puzzolanic reaction is intensified. Hence, more C-S-H is formed that fills pores and cracks, leading to a denser structure and finally to higher strength. T2 - 4th International Symposium on Ultra-High Performance Concrete and High Performance Materials (HiPerMat) CY - Kassel, Germany DA - 09.03.2016 KW - Ultra-high performance concrete KW - Thermal treatment KW - Compressive strength KW - Tobermorite KW - C-S-H KW - Building Materials PY - 2016 SN - 978-3-7376-0094-1 VL - 27 SP - 7 EP - 8 PB - kassel university press GmbH CY - Kassel AN - OPUS4-36872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Pirskawetz, Stephan A1 - Meng, Birgit ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Application of innovative testing methods for the quasi non-destructive assessment of the material condition in hydraulic engineering structures T2 - First Internatonal RILEM Symposium "on Site Assessment of Concrete, Masonry and Timber Structures" (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Quasi non-destructive assessment KW - Hydraulic engineering structures KW - Radar KW - Ultrasonic and ray PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 1 EP - 10 PB - RILEM Publications AN - OPUS4-18356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Mikrostruktur und Dauerhaftigkeit zementgebundener Baustoffe T2 - 8. Münchener Baustoffseminar "Dauerhaftigkeit von Betonkonstruktionen - Von den Mechanismen zum Lebensdauermanagement" CY - München, Deutschland DA - 2008-10-10 KW - Beton KW - Gefüge KW - Zement KW - Dauerhaftigkeit PY - 2008 SP - 1 EP - 9 AN - OPUS4-18594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Gardei, André A1 - Massah, Sima A1 - Meng, Birgit T1 - Hydraulische Bindemittel KW - Bindemittel KW - Puzzolane KW - Hydraulisch KW - Beton KW - Denkmalpflege PY - 2008 SN - 978-3-86568-451-6 N1 - Serientitel: Berichte zu Forschung und Praxis der Denkmalpflege in Deutschland – Series title: Berichte zu Forschung und Praxis der Denkmalpflege in Deutschland IS - 16 SP - 9 EP - 21 PB - Michael Imhof AN - OPUS4-19087 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vasilic, Ksenija A1 - Meng, Birgit A1 - Kühne, Hans-Carsten T1 - Computational modelling of scc flow: reinforcement network modelled as a porous medium T2 - Rheo-Iceland 2009 3rd RILEM International Symposium on Rheology of Cement Suspensions Like Fresh Concrete CY - Reykjavik, Iceland DA - 2009-08-19 PY - 2009 AN - OPUS4-19403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichhorn, Michael A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Performance-Verbesserung bei Betonwerksteinen durch multi-funktionelle Nano-Additive T2 - 17. Internatiole Baustofftagung "ibausil" CY - Weimar, Germany DA - 2009-09-23 PY - 2009 AN - OPUS4-19556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Olafur H. Wallevik, ED - Stefan Kubens, ED - Sonja Oesterheld, T1 - Computational modelling of SCC flow: Reinforcement network modelled as porous medium T2 - 3rd International RILEM symposium on rheology of cement suspensions such as fresh concrete CY - Reykjavik, Iceland DA - 2009-08-19 KW - SCC KW - Modelling KW - CFD PY - 2009 SN - 978-2-35158-091-2 IS - PRO 68 SP - 148 EP - 154 PB - RILEM Publications AN - OPUS4-20238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bürgisser, Philip A1 - Müller, Urs A1 - Meng, Birgit A1 - Abart, R. ED - Leon Black, ED - Phil Purnell, T1 - Influence of natural pozzolans of mechansims of the alkali silica reaction (ASR) in concrete T2 - 29th Cement and concrete science conference CY - Leeds, UK DA - 2009-09-07 KW - AKR KW - Natürliche puzzolanische Zusatzstoffe KW - C-S-H Phasen PY - 2009 SN - 978-0-85316-281-0 SP - 143 EP - 146 AN - OPUS4-20249 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bürgisser, Philip A1 - Müller, Urs A1 - Meng, Birgit A1 - Abart, R. ED - Stark, J. T1 - Der Einfluss von natürlichen Puzzolanen vulkanischen Ursprungs auf die Alkali-Kieselsäurereaktion (AKR) im Beton T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - AKR KW - Natürliche puzzolanische Zusatzstoffe KW - C-S-H Phasen PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0687 - 2-0692 CY - Weimar AN - OPUS4-20298 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Eichhorn, Michael ED - Stark, J. T1 - Performance-Verbesserung bei Betonwerksteinen durch multi-funktionale Nano-Additive T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0675 - 2-0680 CY - Weimar AN - OPUS4-20302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Stark, J. T1 - Betoninstandsetzung mit modular zusammengesetzten PCC- und SPCC-Mörteln T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-0151 - 2-0156 CY - Weimar AN - OPUS4-20301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herbst, Tristan A1 - Hauer, B. A1 - Rübner, Katrin A1 - Meng, Birgit ED - Stark, J. T1 - Nachhaltiges Bauen mit Beton - Einsatz sekundärer Gesteinskörnungen T2 - 17. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2009-09-23 KW - Sekundärrohstoffe KW - Müllverbrennungsaschen KW - Sekundäre Gesteinskörnung PY - 2009 SN - 978-3-00-027265-3 VL - 2 SP - 2-1273 - 2-1278 CY - Weimar AN - OPUS4-20299 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Frank A1 - Meng, Birgit T1 - Charakterisierung von Schädigungsprozessen in Betonen mit innovativer Prüftechnik T2 - VDB-Fachtagung 2006 "Beton-Entwicklungen und Tendenzen" CY - Bergisch Gladbach, Germany DA - 2006-04-27 PY - 2006 AN - OPUS4-12372 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Meng, Birgit ED - Jensen, O. T1 - Influence of mix composition on early-age autogenous deformations of cement pastes T2 - International RILEM Conference on Volume Changes of Hardening Concrete: Testing and Mitigation CY - Lyngby, Denmark DA - 2006-08-20 KW - Autogenes Schwinden KW - Hochleistungsbeton KW - Hydratation KW - Porenstruktur KW - Zusatzstoffe KW - Zusatzmittel PY - 2006 SN - 2-351-58004-4 SP - 261 EP - 272 PB - RILEM Publications CY - Bagneux AN - OPUS4-12672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Österle, Werner A1 - Gardei, André ED - Stark, J. T1 - Characterization of granulated blast furnace slag by means of the combined application of the FIB/TEM technique T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 1 SP - 1-0189 - 1-0195 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Haamkens, Frank A1 - Maultzsch, Matthias A1 - Meinhold, Uwe A1 - Meng, Birgit ED - Stark, J. T1 - Instandsetzung von Beton mit geringen Festigkeiten T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 KW - Wasserbau KW - Beton mit geringer Festigkeit KW - Instandsetzung KW - Leistungsfähigkeit PY - 2006 SN - 3-00-018263-2 IS - Band 2 SP - 2-1173 - 2-1180 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-14475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Frank A1 - Meng, Birgit T1 - Identifikation von Schädigungsprozessen in Beton mit innovativen Prüftechniken T2 - Fachtagung des DAfStb "Neue Entwicklungen im Betonbau" CY - Berlin, Germany DA - 2007-03-08 PY - 2007 AN - OPUS4-14608 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Frank A1 - Pirskawetz, Stephan A1 - Müller, Urs A1 - Meng, Birgit T1 - Charakterisierung der Schädigungsprozesse in Betonen mit innovativen Prüftechniken KW - Beton KW - Schädigungsprozesse KW - Zerstörungsarme und zerstörungsfreie Prüfverfahren PY - 2006 SN - 0005-9846 VL - 56 IS - 6 SP - 268 EP - 275 PB - Verlag Bau + Technik CY - Erkrath AN - OPUS4-14403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Nanotechnologische Anwendungen in Baustoffen T2 - Fachgespräch "Nanotechnologie im Bauwesen (Nanoexture) CY - Düsseldorf, Germany DA - 2006-12-05 PY - 2006 AN - OPUS4-14526 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Pirskawetz, Stephan A1 - Weise, Frank A1 - Meng, Birgit T1 - Detection of early-age cracking due to restrained autogenous shrinkage T2 - Symposium "Advances in Construction Materials" (ACM) CY - Stuttgart DA - 2007-07-23 KW - Hochleistungsbetone KW - Autogenes Schwinden KW - Frühe Rissbildung KW - Schallemissionsanalyse PY - 2007 SN - 978-3-540-72447-6 SP - 489 EP - 496 PB - Springer CY - Stuttgart AN - OPUS4-15708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Nanotechnologie im Bauwesen T2 - Jährliche Fachveranstaltung des deutschen Beton- und Bautechnik-Vereins (DBV) - Hauptausschuss Betontechnologie Veranstalter:DBV, BAM -VII:1 CY - Berlin, Germany DA - 2007-06-20 PY - 2007 AN - OPUS4-14995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Nano-Gefügeanalytik als Optimierungsgrundlage für innovative Baustoffe T2 - Fachtagung "Nanotechnologie im Bauwesen - Nanooptimierte Hightech-Baustoffe" CY - Kassel, Germany DA - 2007-05-09 PY - 2007 AN - OPUS4-14851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit T1 - Wärmebehandlung und Autoklavierung von UHPC - Einfluss auf Mikrostruktur und mechanische Eigenschaften T2 - Feuerfestkolloquium 2011, Fachsymposium "Fertigteile aus UHPC - Fertigungspartner Feuerfestindustrie?" CY - Aachen, Germany DA - 2011-10-20 PY - 2011 AN - OPUS4-24745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. T1 - Influence of polypropylene fibres on the thermal strain of high strength concrete at high temperatures N2 - This paper presents the results of an experimental study on the influence of polypropylene (PP) fibres on the thermal strain of high strength concrete (HSC) at temperatures up to 750°C. Concerning this topic only few results can be found in the literature and systematic investigations are missing. However, basic knowledge is necessary to understand the internal damage processes as well as for structural design. To explain the differences in the thermal strain of HSC with and without addition of PP fibres the internal damage processes were investigated with acoustic emission (AE) analysis and ultrasound (US). Furthermore the weight loss was measured continuously during heating to monitor the drying of the specimen. This novel approach by combining these different methods with strain measurements at high temperatures allows the integral description of the internal damage processes. The results reveal significant differences in the thermal strain of HSC when PP fibres are added. Between 200°C and 250°C the thermal strain of HSC with PP fibres is superimposed by shrinkage caused by accelerated drying. Above 250°C it is lower than that of plain HSC without PP fibres. It is supposed that it is caused by a more homogeneous distribution of micro cracks whereby the fibre beds acting as defects in the concrete. Hence this paper gives a contribution to the general understanding of the impact of PP fibres in HSC at high temperatures and points out the influence of the fibres on the thermal strain of HSC. KW - High performance concrete KW - High temperatures KW - Polypropylene fibres KW - Thermal strain KW - Acoustic emission KW - Ultrasound PY - 2011 DO - https://doi.org/10.1260/2040-2317.2.3.173 SN - 2040-2317 VL - 2 IS - 3 SP - 173 EP - 179 PB - Multi-Science Publ. Co. CY - Brentwood AN - OPUS4-24817 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pistol, Klaus A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. ED - Koenders, E.A.B. ED - Dehn, F. T1 - The mode of action of polypropylene fibres in high performance concrete at high temperatures N2 - It has been shown in fire tests that polypropylene fibres reduce or avoid explosive spalling of high performance concrete. In the critical temperature ränge up to 300 °C the permeability of HPC increases by using polypropylene fibre. Due to this the water vapour, which is the main reason for explosive spalling, can escape. There exist different theories in the literature conceming the micro structural mechanisms, which cause an increase in the permeability. Within the framework of an internal research project at BAM an innovative methodology was developed for experimental verifying of existing theories and to get new insights into this problem The methodology used is unique and has been undertaken here for the first time. This consists of the combination of acoustic emission and ultrasonic measurement during temperature loading and the non-destructive micro structural analysis of cooled down samples with the aid of micro X-ray computed tomography. For the validation of the nondestructive test methods scanning electron microscopic images of prepared samples were undertaken. The results show that due to the thermal decomposition of the polypropylene fibres micro canals emerge. These are connected due to a simultaneous micro cack formation. T2 - 2nd International RILEM workshop on concrete spalling due to fire exposure CY - Delft, The Netherlands DA - 05.10.2011 KW - Spalling KW - Polypropylene fibres KW - High performance concrete KW - Acoustic emission KW - X-ray computed tomography KW - Scanning electron microscopy PY - 2011 SN - 978-2-35158-118-6 SP - 289 EP - 296 PB - RILEM Publications AN - OPUS4-24835 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Rogge, Andreas T1 - Wärmebehandlung und Autoklavierung von UHPC - Neue Perspektiven für die Betonfertigteilindustrie T1 - Heat curing and autoclaving of UHPC - New perspectives for the precast concrete industry N2 - Das Gefüge von UHPC ist durch eine dicht gepackte und fehlstellenarme Matrix gekennzeichnet. Eine zusätzliche Optimierung ist durch eine Wärmebehandlung bzw. hydrothermale Nachbehandlung (Autoklavierung) unter einem Wasserdampfsättigungsdruck möglich. Die Wärmebehandlung von Beton ist ein in der Betonfertigteilindustrie geläufiges Verfahren, um die Erstarrungszeit zu verkürzen und höhere Frühfestigkeiten zu erreichen. N2 - The structure of UHPC is characterized by a densely packed matrix with only a small number of voids; it can be enhanced further by heat curing or hydrothermal Treatment (autoclaving) subject to water vapor pressure. Heat curing of concrete is commonly applied in the precast industry in Order to shorten its setting time and achieve higher early strengths. KW - Ultrahochleistungsbeton KW - Stahlfasern KW - Nachbehandlung KW - Mikrostruktur KW - Festigkeit PY - 2011 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 77 IS - 10 SP - 46 EP - 47 PB - Bauverl. CY - Gütersloh AN - OPUS4-24838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Müller, Urs A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Schädigungsmechanismen in Beton T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Frost-Tausalz-Beanspruchung KW - Schrumpfrisse KW - Autogenes Schwinden KW - Plastisches Schwinden KW - Brand KW - Sulfatangriff KW - AKR PY - 2011 SN - 978-3-9814281-0-0 IS - D1 SP - 105 EP - 110 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vasilic, Ksenija A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Roussel, N. T1 - Flow of fresh concrete through steel bars: a porous medium analogy N2 - Although being a very promising area of concrete technology, computational modeling of fresh concrete flow is a comprehensive and time consuming task. The complexity and required computation time are additionally increased when simulating casting of heavily reinforced sections, where each single reinforcement bar has to be modeled. In order to improve the computation speed and to get closer to a practical tool for simulation of casting processes, an innovative approach to model reinforced sections is proposed here. The basic idea of this approach is to treat the reinforcement zone as a porous medium in which a concrete is propagating. In the present paper, the numerical implementation of this concept is described. A methodology allowing for the computation of the equivalent permeability of the steel bars network is suggested. Finally, this numerical technique efficiency is evaluated by a comparison with experimental results of model fluids casting in model formworks. KW - Fresh concrete (A) KW - Rheology (A) KW - Modeling (E) KW - Permeability (C) KW - Yield stress KW - Simulation KW - Flow of mortar KW - Flow of concrete PY - 2011 DO - https://doi.org/10.1016/j.cemconres.2011.01.013 SN - 0008-8846 SN - 1873-3948 VL - 41 IS - 5 SP - 496 EP - 503 PB - Pergamon Press CY - New York, NY AN - OPUS4-25532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. T1 - Transient strain of high strength concrete at elevated temperatures and the impact of polypropylene fibers N2 - This paper presents the results of an experimental study on the transient strain of high strength concrete (HSC) under heating up to 750 °C and the impact of polypropylene (PP) fibers. Concerning this topic only few results are available in the literature and systematic investigations are missing. However, basic knowledge is necessary for the understanding of the internal damage processes in the material as well as for heated structures. The transient strain during heating can be separated in two basic components: the free thermal strain and the mechanical strain. They were experimentally determined exemplarily for one HSC. For the determination of the mechanisms of transient strain and particularly the influence of PP fibers different techniques were applied. In this context the monitoring of the microcracking was done for the first time with acoustic emission analysis in combination with ultrasonic measurements. This new approach helps fundamentally to explain the impact of PP fibers on free thermal strain and mechanical strain during heating up. Furthermore weight loss measurements were carried out to characterize the moisture transport. It was shown that the PP fibers cause an acceleration of the moisture transport in the temperature range from 200 to 250 °C which leads to drying shrinkage in opposite direction to the free thermal strain. Hence this paper is a contribution to the general understanding of the impact of PP fibers in HSC at high temperatures and emphasizes the important influence of PP fibers on the thermal and mechanical induced strain of HSC. KW - High strength concrete KW - Polypropylene fibers KW - Elevated temperatures KW - Transient strain KW - Acoustic emission KW - Ultrasound PY - 2012 DO - https://doi.org/10.1617/s11527-011-9798-6 SN - 1359-5997 SN - 1871-6873 VL - 45 IS - 5 SP - 793 EP - 801 PB - Springer CY - Dordrecht AN - OPUS4-26029 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Hauer, B. A1 - Pierkes, R. A1 - Schäfer, S. A1 - Seidel, M. A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit T1 - Verbundforschungsvorhaben 'Nachhaltig Bauen mit Beton' - Potenziale des Sekundärstoffeinsatzes im Betonbau - Teilprojekt B N2 - Die Nutzung und Weiterverarbeitung von Sekundärstoffen kann in der Baustoffherstellung einen Beitrag zum nachhaltigen Bauen leisten. Im Rahmen des Teilprojekts B wurde die Bewertung dieser Potenziale anhand von Beispielen ausgebaut und verifiziert. Die Basis dieser Bewertungsgrundlage ist die Erfüllung der grundlegenden technischen Anforderungen (ökobilanzielle Indikatoren, vergleichende ökobilanzielle Betrachtung). Im Teilprojekt E geht es um die Freisetzung umweltrelevanter Stoffe aus zementgebundenen Baustoffen. Überprüft werden sollte die Übereinstimmung zwischen Laborergebnissen, Modellierungen und realen Grundwasserkonzentrationen. Es wurden Schlitzwände errichtet, die in den Grundwasserleiter einbinden und umweltrelevante Parameter bestimmt. Grundsätzlich hat sich selbst bei Großbaustellen nur eine geringe Beeinflussung der Grundwasserqualität durch Beton ergeben. KW - Sekundärstoff KW - Zement KW - Beton KW - Nachhaltigkeit KW - Bewertung KW - Recycling KW - Betonbrechsand KW - Müllverbrennungsasche KW - Kesselsand KW - Ökobilanz PY - 2011 SN - 978-3-410-65094-2 SN - 0171-7197 IS - 584 SP - 1 EP - 151 PB - Beuth CY - Berlin AN - OPUS4-25982 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wallau, Wilma A1 - Pirskawetz, Stephan A1 - Voland, K. A1 - Weise, Frank A1 - Meng, Birgit ED - De Schutter, G. ED - De Belie, N. ED - Janssens, A. ED - Van Den Bossche, N. T1 - Online monitoring of the expansion of alkali-silica reaction affected concrete prisms implemented to the accelerated concrete prism test at 60 °C N2 - The accelerated concrete prism test (ACPT-60 °C) facilitates testing of alkali-silica reactivity of aggregates within five months. Manual measurement is usually conducted to determine expansion of test specimen every 28 days. This conventional procedure gives only limited insight to expansion behaviour of ASR-affected prisms. Due to the large time intervals, expansion exceeding the critical value of 0.3 mm/m is likely to be noticed late. Continuous recording resolves this problem and delivers beneficial information on the shape of the expansion curve. Displacement transducers integrated into a special testing equipment developed at BAM put continuous measurement into practice. Additionally, ultrasonic velocity and acoustic emissions are measured in-situ and provide deeper insights into hydration and crack formation processes during the test. Aiming for an automated testing method close to the German guideline, the following technical and methodical challenges arise. Changing of the vertical orientation of the prisms with every manual measurement as standardised cannot be implemented. Furthermore, preliminary results already proved true that cooling and heating cycles, as necessarily associated with each manual measurement, can evoke additional expansion. Therefore, interrupted and continuously measured expansions reveal systematic differences, indicating the necessity to adjust the threshold expansion value for automated testing. Results presented in the paper: Different types of reactive aggregate have been tested applying continuous and manual expansion measurement to the concrete specimens. Development of continuously measured ultrasonic velocity and acoustic emissions of the aggregates tested diverge significantly while the expansion curves vary in shape and maximum strain. Prisms produced from a slowly reacting aggregate do not exhibit noticeable crack formation. It shows that comprehensive measuring helps describing and distinguishing ASR-damage mechanisms. Models of ASR-induced expansion, available in the open literature, so far are validated with discontinuous data hardly tracing the modelled curve. Continuous measurement improves validation and further model development. T2 - XIV DBMC - 14th International Conference on Durability of Building Materials and Components CY - Gent, Belgium DA - 29.05.2017 KW - Alkali-silica reaction KW - Accelerated concrete prism test KW - Continuous monitoring KW - Expansion modelling PY - 2017 SN - 978-2-35158-159-9 VL - PRO 107 SP - 1 EP - 11 PB - RILEM Publications S.A.R.L. AN - OPUS4-40499 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Wissensbasierte Digitalisierung von betontechnologischen Materialdaten N2 - Die sprunghaft zunehmende Wichtigkeit von FAIR- und Open-Data für die Qualitätssicherung, aber auch für die Nachnutzbarkeit von Daten und den Erkenntnisfortschritt führt zu enormem Flandlungsbedarf in Forschung und Entwicklung. Damit verbunden laufen derzeit vielfältige, ambitionierte Aktionen, z. B. bezüglich der Erstellung von Ontologien und Wissensgraphen. Das Knowhow entwickelt sich rasant, die Ansätze zur Implementation entstehen in verschiedenen Fachwelten bzw. mit unterschiedlichen Zielsetzungen parallel, so dass recht heterogene Herangehensweisen resultieren. Diese Veröffentlichung fokussiert auf Arbeiten, die derzeit als möglichst ganzheitlicher Ansatz für Materialdaten im Rahmen der Digitalisierungsinitiative „Plattform MaterialDigital" vorangetrieben werden. Die Autoren bearbeiten baustoffbezogene Aspekte im Verbundprojekt „LeBeDigital - Lebenszyklus von Beton". Zielsetzung ist die digitale Beschreibung des Materialverhaltens von Beton über den kompletten Herstellungsprozess eines Fertigteils mit einer Integration von Daten und Modellen innerhalb eines Workflows zur probabilistischen Material- und Prozessoptimierung. Es wird über die Vorgehensweise und die dabei gewonnenen Erfahrungen berichtet, nicht ohne den Blick auf die oft unterschätzte Komplexität der Thematik zu lenken. T2 - Ibausil 2023 CY - Weimar, Germany DA - 13.09.2023 KW - Beton KW - Digitalisierung KW - Datenmanagement KW - FAIR-Prinzip KW - Metadaten KW - Ontologie KW - Wissensgraph PY - 2023 AN - OPUS4-60964 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Dehn, F. A1 - Unger, Jörg F. A1 - Shepherd, D. A. A1 - Tamsen, Erik A1 - Pirskawetz, Stephan T1 - Wissensbasierte Digitalisierung von betontechnologischen Materialdaten N2 - Die sprunghaft zunehmende Wichtigkeit von FAIR- und Open-Data für die Qualitätssicherung, aber auch für die Nachnutzbarkeit von Daten und den Erkenntnisfortschritt führt zu enormem Flandlungsbedarf in Forschung und Entwicklung. Damit verbunden laufen derzeit vielfältige, ambitionierte Aktionen, z. B. bezüglich der Erstellung von Ontologien und Wissensgraphen. Das Knowhow entwickelt sich rasant, die Ansätze zur Implementation entstehen in verschiedenen Fachwelten bzw. mit unterschiedlichen Zielsetzungen parallel, so dass recht heterogene Herangehensweisen resultieren. Diese Veröffentlichung fokussiert auf Arbeiten, die derzeit als möglichst ganzheitlicher Ansatz für Materialdaten im Rahmen der Digitalisierungsinitiative „Plattform MaterialDigital" vorangetrieben werden. Die Autoren bearbeiten baustoffbezogene Aspekte im Verbundprojekt „LeBeDigital - Lebenszyklus von Beton". Zielsetzung ist die digitale Beschreibung des Materialverhaltens von Beton über den kompletten Herstellungsprozess eines Fertigteils mit einer Integration von Daten und Modellen innerhalb eines Workflows zur probabilistischen Material- und Prozessoptimierung. Es wird über die Vorgehensweise und die dabei gewonnenen Erfahrungen berichtet, nicht ohne den Blick auf die oft unterschätzte Komplexität der Thematik zu lenken. T2 - Internationale Baustofftagung (ibausil) CY - Weimar, Germany DA - 13.09.2023 KW - Beton KW - Digitalisierung KW - Materialdaten KW - Datenmanagement KW - FAIR-Prinzip KW - Metadaten KW - Ontologie KW - Wissengraph PY - 2023 UR - https://www.uni-weimar.de/de/bauingenieurwesen/institute/fib/ibausil/ VL - 2023 SP - 1 EP - 11 PB - Sonderausgabe des Online-Journals ce/papers von Wiley AN - OPUS4-58315 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Wolfram A1 - Brouwers, H.J.H. A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Wang, K. ED - Shah, S.P. ED - Khayat, K. T1 - Casting process improvement by optimization of mixture composition and high range water reducing agent modification N2 - Since its invention in the early 1990’s, self-consolidating concrete has never become well established in the ready-mix sectors worldwide. The reason for this can be mainly found in the fact that the sophisticated compositions are sensitive against changing environments. This lack of robustness can be attributed to the interaction between cement hydration reaction and high range water reducing agent (HRWRA). Understanding the relevant mechanisms that control the initial flow performance as well as the flow retention helps optimizing SCC mixtures that perform either steadily in one specific environment or that perform largely similarly at steadily changing environments. This paper depicts how HRWRAs interact with clinker and hydration phases and discusses the important role of the charge density of a polycarboxylic HRWRA in the way the rheology is affected. Based on rheometric results and observations of the Vicat setting times, it is shown that increasing charge densities of the HRWRA and decreasing water to powder ratios (w/p) reduce the flow retention and have lesser retarding effect on the setting. Based on the discussion, optimization procedures for the mixture composition and the HRWRA modification are suggested to achieve optimized performance for varying environmental situations or highest robustness for specific conditions. T2 - SCC 2013 - 5th North American conference on the design and use of self-consolidating concrete CY - Chicago, IL, USA DA - 12.05.2013 KW - Polycarboxylate KW - Cement hydration KW - Adsorption KW - Mixture composition KW - Environmental conditions PY - 2013 SP - 1 EP - 10 AN - OPUS4-28581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -