TY - GEN A1 - Schneider, M. A1 - Meng, Birgit T1 - Ressourcenschonung bei der Zementherstellung am Beispiel des Einsatzes von Hüttensand PY - 2002 SN - 3-7640-0426-6 SP - 10 EP - 14 PB - Verlag Bau + Technik CY - Düsseldorf AN - OPUS4-2069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schießl, P. A1 - Meng, Birgit A1 - Adam, G. A1 - Rößler, G. A1 - Schröder, P. A1 - Schwamborn, B. A1 - Wallner, B. A1 - Wiegrink, K. ED - Zilch, K. ED - Diederichs, C. J. T1 - Baustoffe PY - 2002 SN - 3-540-65760-6 IS - Kap. 3.1 SP - 3-3-3-60 PB - Springer CY - Berlin AN - OPUS4-2070 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Maultzsch, Matthias A1 - Wolff, L. A1 - Meng, Birgit A1 - Raupach, M. ED - Maultzsch, M. T1 - Long-term performance of surface protection systems for concrete T2 - 11th International Congress on Polymers in Concrete (ICPIC `04) CY - Berlin, Germany DA - 2004-06-02 KW - Surface protection system KW - Concrete KW - Weathering KW - Water uptake KW - Freezethaw resistance KW - Chloride ingress KW - Carbonation KW - Hydrophobic treatment PY - 2004 SN - 3-00-013706-8 SP - 417 EP - 428 PB - BAM CY - Berlin AN - OPUS4-3602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kühne, Hans-Carsten A1 - Maier, Bärbel A1 - Maultzsch, Matthias A1 - Meng, Birgit A1 - Meinhold, Uwe T1 - Verification of the suitability of shotcrete on low strength concrete surfaces T2 - 10th International Conference on Durability of Building Materials and Components (DBMC) CY - Lyon, France DA - 2005-04-17 KW - Hydraulic engineering structures KW - Low strength concrete KW - Repair systems KW - Performance tests PY - 2005 SP - 8 pages CY - Lyon AN - OPUS4-7413 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Fontana, Patrick A1 - Meng, Birgit T1 - BAM-Division VII.1 Building Materials: Main Expertise/NANOCEM Partner Project T2 - Nanocem Open meeting CY - Morges, Switzerland DA - 2005-04-29 PY - 2005 AN - OPUS4-7420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Pliett, H. A1 - Wenzel, F. A1 - Meng, Birgit T1 - A sustainable approach for the conservation of the Timur Shah Mausoleum in Kabul, Afghanistan T2 - 10th International Conference on Durability of Building Materials and Components (DBMC) CY - Lyon, France DA - 2005-04-17 PY - 2005 SP - 1 EP - 8(?) CY - Lyon AN - OPUS4-7411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fontana, Patrick A1 - Meng, Birgit A1 - Hillemeier, B. T1 - Frühe autogene Verformungen von HPC - Beurteilung des plastischen Schwindens und spannungsinduzierender Verformungen durch Korrelation mit der Hydratationskinetik N2 - Der Einfluß der Mischungszusammensetzungen auf das frühe autogene Schwinden der Bindemittelmatrix von Hochleistungsbetonen wurde durch Korrelation mit der Hydratationskinetik untersucht. Durch die Analyse der Verformungsgeschwindigkeiten konnte eine Unterscheidung zwischen plastischen und spannungsinduzierenden Verformungen vorgenommen werden. T2 - 45. Forschungskolloquium des DAfStb CY - Wien, Österreich DA - 06.10.2005 KW - Hochleistungsbeton KW - Autogenes Schwinden KW - Hydratation KW - Porenstruktur PY - 2005 SN - 0005-9900 SN - 1437-1006 VL - 100 SP - 57 EP - 60 PB - Ernst CY - Berlin AN - OPUS4-11177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Meng, Birgit A1 - Habel, Wolfgang A1 - Wagenknecht, E. A1 - Hillemeier, B. T1 - Measurement of viscoelastic properties of cement pastes with oscillation rheometry T2 - 24th conference on Cement and Concrete Science CY - Warwick, England, UK DA - 2004-09-16 KW - Cement paste KW - Oscillation rheometry KW - Viscoelastic properties PY - 2004 SP - 1(?) EP - 4(?) AN - OPUS4-11178 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Österle, Werner A1 - Gardei, André ED - Stark, J. T1 - Characterization of granulated blast furnace slag by means of the combined application of the FIB/TEM technique T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 PY - 2006 SN - 3-00-018263-2 VL - 1 SP - 1-0189 - 1-0195 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-13717 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Weise, Frank A1 - Onel, Yener T1 - Feuchtemessung in kapillarporösen Baustoffen T2 - DAfStb Fachtagung "Betonbauten als Dichtkonstruktionen" CY - Berlin, Germany DA - 2004-03-12 PY - 2004 AN - OPUS4-5382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Herbst, Tristan A1 - Meng, Birgit T1 - Ganzheitliche Eignungsbewertung potenzieller Recyclingwege für Mauerwerksrestmassen PY - 2013 SN - 978-3-433-03017-2 SN - 978-3-433-60296-6 SN - 0170-4958 VL - 38 IS - Kap. 2.2.6 SP - 637 EP - 641 PB - Ernst & Sohn AN - OPUS4-28564 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. T1 - Transient strain of high strength concrete at elevated temperatures and the impact of polypropylene fibers N2 - This paper presents the results of an experimental study on the transient strain of high strength concrete (HSC) under heating up to 750 °C and the impact of polypropylene (PP) fibers. Concerning this topic only few results are available in the literature and systematic investigations are missing. However, basic knowledge is necessary for the understanding of the internal damage processes in the material as well as for heated structures. The transient strain during heating can be separated in two basic components: the free thermal strain and the mechanical strain. They were experimentally determined exemplarily for one HSC. For the determination of the mechanisms of transient strain and particularly the influence of PP fibers different techniques were applied. In this context the monitoring of the microcracking was done for the first time with acoustic emission analysis in combination with ultrasonic measurements. This new approach helps fundamentally to explain the impact of PP fibers on free thermal strain and mechanical strain during heating up. Furthermore weight loss measurements were carried out to characterize the moisture transport. It was shown that the PP fibers cause an acceleration of the moisture transport in the temperature range from 200 to 250 °C which leads to drying shrinkage in opposite direction to the free thermal strain. Hence this paper is a contribution to the general understanding of the impact of PP fibers in HSC at high temperatures and emphasizes the important influence of PP fibers on the thermal and mechanical induced strain of HSC. KW - High strength concrete KW - Polypropylene fibers KW - Elevated temperatures KW - Transient strain KW - Acoustic emission KW - Ultrasound PY - 2012 DO - https://doi.org/10.1617/s11527-011-9798-6 SN - 1359-5997 SN - 1871-6873 VL - 45 IS - 5 SP - 793 EP - 801 PB - Springer CY - Dordrecht AN - OPUS4-26029 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pistol, Klaus A1 - Weise, Frank A1 - Meng, Birgit T1 - Polypropylen-Fasern in Hochleistungsbetonen - Wirkungsmechanismen im Brandfall N2 - Bauteile bzw. Tragwerke aus Hochleistungsbetonen müssen in der Regel gegen brandinduzierte Abplatzungen mit geeigneten Maßnahmen geschützt werden, um einen ausreichenden Feuerwiderstand im Brandfall zu gewährleisten. Die bisher wirtschaftlich und technologisch sinnvollste Methode zur Verhinderung von explosionsartigen Betonabplatzungen im Brandfall ist die Zugabe von Polypropylen-Fasern. Die Wirksamkeit der Fasern konnte zwar empirisch gezeigt werden, es stellt sich allerdings die Frage, welche Mechanismen zur Verhinderung der Abplatzungen führen. Der vorliegende Beitrag fasst bisherige Theorien zur Wirkungsweise von Polypropylen-Fasern in brandbeanspruchten Hochleistungsbetonen zusammen und stellt eine innovative Methodologie zur Erforschung der mikrostrukturellen Prozesse vor. Die Ergebnisse zeigen, dass die nach dem Schmelzen und Zersetzen der Polypropylen-Fasern frei werdenden Mikrokanäle durch eine gleichzeitig einsetzende Mikrorissbildung netzartig verbunden werden. Die Mikrorissbildung ermöglicht somit den Abbau von Eigen- und Zwangsspannungen im Beton (mechanischer Effekt) und die Entstehung eines Transportwegesystems für den ausströmenden Wasserdampf (Permeationseffekt).--------------------------------------------------------------------------- Structural members and bearing structures of high performance concrete generally have to be protected against explosive spalling due to fire exposure to guarantee a sufficient fire resistance. Up to now, the economically and technologically most worthwhile method to prevent explosive spalling is the addition of polypropylene fibres. Though the effectiveness of the fibres could be shown empirically, the mechanisms preventing explosive spalling are still debatable. The present article summarizes the existing theories concerning the mode of action of polypropylene fibres in fire exposed high performance concretes and presents an innovative methodology for analysing the micro structural processes. The results show that due to the thermal decomposition of the polypropylene fibres micro channels are created and simultaneously connected due to a netlike micro crack formation. This enables the relief of internal stresses (mechanical effect) and the formation of a permeable transport system for the escaping water vapour (permeation effect). KW - Polypropylen-Fasern KW - Brandschutz KW - Structural fire protection KW - Computertomographie KW - Computed tomography KW - Hochleistungsbeton KW - High performance concrete KW - Messtechnik KW - Mikrorisse KW - Micro cracks KW - Polypropylen-Fasern KW - Polypropylene fibres KW - PP-Fasern KW - Prüfmethoden KW - Rasterelektronenmikroskopie KW - Scanning electron microscopy KW - Risse KW - Schallemissionsanalyse KW - Acoustic emission KW - UHPC KW - Baustoffe KW - Brandschutz KW - Versuche PY - 2012 DO - https://doi.org/10.1002/best.201200024 SN - 0005-9900 SN - 1437-1006 VL - 107 IS - 7 SP - 476 EP - 483 PB - Ernst CY - Berlin AN - OPUS4-26174 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Hauer, B. ED - Bager, D. H. ED - Silfwerbrand, J. T1 - Sustainable evaluation - concept to assess the applicability of secondary aggregates in concrete T2 - fib Symposium Stockholm 2012 'Concrete structures for a sustainable community' CY - Stockholm, Sweden DA - 2012-06-11 KW - Sustainability KW - Sustainable evaluation KW - Secondary aggregates KW - Concrete PY - 2012 SN - 978-91-980098-1-1 SP - 441 EP - 444 PB - Royal Institute of Technology CY - Stockholm AN - OPUS4-26316 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Herbst, Tristan A1 - Meng, Birgit A1 - Rübner, Katrin T1 - Ganzheitliche Eignungsbewertung von Sekundärrohstoffen für den Einsatz in Beton N2 - Der Einsatz von Sekundärrohstoffen im Betonbau kann einen wesentlichen Beitrag zu einer nachhaltigen Ressourcenwirtschaft im Bauwesen leisten. Sekundärrohstoffe (Recycling-Baustoffe, RC-Baustoffe) finden bereits Anwendung als Roh- bzw. Brennstoffe in der Portlandzementklinkerherstellung, als Zementbestandteile, als Betonzusatzstoffe sowie als sekundäre Gesteinskörnungen in Beton. In einem Teilprojekt des DAfStb/BMBF-Verbundforschungsvorhabens 'Nachhaltig Bauen mit Beton' wurde das Einsatzpotenzial von Sekundärrohstoffen in Beton untersucht. Hierbei spielen sowohl technische als auch ökologische und ökonomische Fragestellungen eine wichtige Rolle. Vor diesem Hintergrund wurde eine Bewertungsgrundlage mit ganzheitlicher Betrachtung von Nachhaltigkeitsaspekten (Technik, Ökologie, Ökonomie) ausgearbeitet. Dieses Bewertungskonzept umfasst die vier Bewertungsschritte: I. Grundsätzliche Überlegungen, II. Vorteile für das nachhaltige Bauen, III. Alternative Bewertungswege und IV. Sensitivitätsanalysen. Das Bewertungskonzept wurde am Beispiel der bereits im Betonbau eingesetzten rezyklierten Gesteinskörnungen entwickelt.---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Nowadays there are several applications of secondary mineral materials and residues. In the framework of the German research project 'Sustainable Building with Concrete', a concept to assess the applicability of already used and new secondary materials in concrete has been developed. It considers sustainability aspects and includes the following four assessment steps: I. Basic considerations, II. Advantages for sustainable construction, III. Alternative paths of application, and IV. Sensitivity analysis. Depending on changing technical, ecological and economic aspects, the assessment has to be performed for changed technical, ecological and economic conditions as necessity arises. KW - Nachhaltigkeit KW - Baustoffe KW - Betontechnologie KW - Sustainability KW - Sustainable evaluation KW - Holistic concept KW - Secondary materials KW - Secondary aggregates KW - Concrete KW - Allgemeines PY - 2012 DO - https://doi.org/10.1002/best.201200025 SN - 0005-9900 SN - 1437-1006 VL - 107 IS - 8 SP - 533 EP - 539 PB - Ernst CY - Berlin AN - OPUS4-26337 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Meng, Birgit A1 - Müller, Urs A1 - Garcia, O. A1 - Malaga, Katarina T1 - Performance of a new anti-graffiti agent used for immovable cultural heritage objects N2 - Cultural Heritage objects are in many cases invaluable and irrecoverable, therefore their protection is a prior goal. One threat arises by intentionally defacing such objects with graffiti. One possibility to face the imminent threat is the application of a surface protection in form of anti-graffiti systems (AGS). However, the knowledge about the performance and durability of AGS on substrates used for historical buildings is still fragmented. The goal of the presented study was to investigate the performance of a newly developed agent in comparison to a selection of commercial anti-graffiti agents on different substrates, which were used for historical buildings. Four commercial anti-graffiti agents with different chemical formulations were selected and tested with the new agent on different stone and brick substrates. The results showed clearly that AGS based on dense, water vapour impermeable coatings are not suitable to porous substrates such as sandstone, brick or porous limestone due to their impair of the hygric properties and the visual appearance of a substrate. The new agent could not completely reach the cleaning efficacy of the dense coatings but exhibited a much lower impact on the properties of the substrate and was therefore better compatible to historical surfaces. KW - Graffiti KW - Cultural Heritage KW - Anti-graffiti agent KW - Performance KW - Stone KW - Brick KW - Cleaning efficacy KW - Compatibility PY - 2014 DO - https://doi.org/10.1080/15583058.2012.747116 SN - 1558-3058 SN - 1558-3066 VL - 8 IS - 6 SP - 820 EP - 834 PB - Taylor & Francis CY - Philadelphia, Pa., USA AN - OPUS4-28605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Repair mortars for the restoration and reprofiling of natural stone elements in cultural heritage N2 - For the protection of the world's cultural heritage the restoration of listed buildings and monuments is an important task. In many cases the need to repair and reprofile natural stone elements occurs. Repair mortars for such applications have to match historicocultural interests as well as durability related and constructive interests. Currently a research project dealing with the development and optimisation of such mortars is set up at the BAM. Special focus is laid on the possibility of a modular adaption to match a vast variety of stone properties. Besides the development and lab scale testing of the mortar system, an in-situ application will be planned and executed. T2 - EWCHP-2011 - European workshop on cultural heritage preservation CY - Berlin, Germany DA - 26.09.2011 KW - Repair mortar KW - Natural stone KW - Stone restoration KW - Stone reprofiling KW - Modular system KW - Listed buildings and monuments PY - 2011 SN - 978-3-8167-8560-6 SP - 281 EP - 288 AN - OPUS4-24561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Hauer, B. T1 - Assessment concept for the sustainable use of secondary aggregates in concrete N2 - Nowadays there are several applications of mineral recycling materials and residues. At present an assessment method for the use of secondary raw materials, which considers sustainability aspects, does not exist. In the framework of the German DAfStb/BMBF research project 'Sustainable Building with Concrete' an assessment concept was developed. It includes the following four assessment steps: I. Basic considerations, II. Advantages for sustainable construction, III. Alternative paths for application, and IV. Sensitivity analysis. The concept was developed on the basis of recycled concrete aggregates, which are already used according to German standards. Afterwards, it was applied and verified by the evaluation of the utilisation of municipal solid waste incinerator bottom ashes. T2 - International RILEM conference on advances in construction materials through science and engineering CY - Hong Kong, China DA - 05.09.2011 KW - Sustainability KW - Assessment KW - Secondary aggregates KW - Concrete PY - 2011 SN - 978-2-35158-116-2 VL - PRO 79 IS - Chapter 10 / Study of sustainable use... SP - 1 EP - 8 PB - RILEM Publications AN - OPUS4-24564 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Grantham, M. ED - Mechtcherine, V. ED - Schneck, U. T1 - Influence of selected aspects of the mixture proportioning on the performance of repair mortars T2 - Concrete solutions 2011 - 4th International conference on concrete repair CY - Dresden, Germany DA - 2011-09-26 KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2012 SN - 978-0-415-61-622-5 SP - 451 EP - 459 PB - Taylor & Francis CY - London AN - OPUS4-24567 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Müller, Urs A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Schädigungsmechanismen in Beton T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Frost-Tausalz-Beanspruchung KW - Schrumpfrisse KW - Autogenes Schwinden KW - Plastisches Schwinden KW - Brand KW - Sulfatangriff KW - AKR PY - 2011 SN - 978-3-9814281-0-0 IS - D1 SP - 105 EP - 110 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25141 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Müller, Urs A1 - Fontana, Patrick T1 - Neue Erkenntnisse und Analysemethoden zum Phasenbestand und Gefüge des Zementsteins T2 - 52.DAfStb-Forschungskolloquium, BAM CY - Berlin, Germany DA - 2011-11-07 PY - 2011 AN - OPUS4-25226 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Rheologie von Instandsetzungsmörteln - aktuelle Untersuchungen mit dem Würpelgerät T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 58 EP - 66 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25192 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vasilic, Ksenija A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Roussel, N. ED - Rogge, A. ED - Meng, B. T1 - Modelling of fresh SCC flow through reinforced sections T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 50 EP - 57 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lehmann, Christian A1 - Fontana, Patrick A1 - Müller, Urs A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Entwicklung von C-S-H-Phasen in autoklaviertem Ultra-Hochleistungs-Beton (UHPC) T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 25 EP - 32 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Müller, Urs A1 - Fontana, Patrick ED - Rogge, A. ED - Meng, B. T1 - Neue Erkenntnisse und Analysemethoden zum Phasenbestand und Gefüge des Zementsteins T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Baustoffe KW - Zement KW - Mörtel KW - Mineralogische Zusammensetzung PY - 2011 SN - 978-3-9814281-0-0 SP - 11 EP - 17 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25198 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Voland, Katja A1 - Weise, Frank A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Untersuchung des Einflusses der Gefügedichte von Betonen auf die AKR mit neuartiger Prüftechnik T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Alkali-Kieselsäure-Reaktion KW - Nebelkammerlagerung bei 40° C KW - 60° C-Betonversuch KW - Dehnungsmessung KW - Schallemissionsanalyse KW - Ultraschallgeschwindigkeit KW - mu-3D-CT PY - 2011 SN - 978-3-9814281-0-0 SP - 86 EP - 95 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Huismann, Sven A1 - Korzen, Manfred A1 - Weise, Frank A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Betonabplatzungen unter Feuerangriff und der Einfluss von Polypropylenfasern auf die Mikrorissbildung T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 163 EP - 171 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25185 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Urs A1 - Meng, Birgit A1 - Bürgisser, Philip ED - Rogge, A. ED - Meng, B. T1 - Das natürliche Puzzolan 'Rheinischer Trass' und dessen Einfluss auf eine Alkali-Kieselsäure-Reaktion (AKR) in Beton T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 PY - 2011 SN - 978-3-9814281-0-0 SP - 141 EP - 150 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25187 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pistol, Klaus A1 - Weise, Frank A1 - Meinel, Dietmar A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Zur Wirkungsweise von Polypropylen-Fasern in brandbeanspruchten Hochleistungsbetonen T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Deutschland DA - 2011-11-07 KW - Polypropylen-Fasern KW - Hochfester Beton KW - Schallemissionsanalyse KW - Röntgen 3D-Computertomographie KW - Rasterelektronenmikroskopie PY - 2011 SN - 978-3-9814281-0-0 SP - 134 EP - 140 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Ganzheitliche Bewertung der Einsatzmöglichkeiten von Sekundärrohstoffen in Beton T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 295 EP - 307 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-25174 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rübner, Katrin A1 - Herbst, Tristan A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Ressourcenschonung durch Reststoffverwertung im Betonbau T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 283 EP - 294 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25175 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - Entwicklung von modularen Instandsetzungsmörteln für den Einsatz an denkmalgeschützten Natursteinbauwerken T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 247 EP - 255 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25177 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Rogge, A. ED - Meng, B. T1 - MODINSYS - Entwicklung und Modifikation von Instandsetzungsmörteln für Beton- und Stahlbetonkonstruktionen T2 - 52. DAfStb-Forschungskolloquium CY - Berlin, Germany DA - 07.11.2011 PY - 2011 SN - 978-3-9814281-0-0 SP - 238 EP - 246 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-25178 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. KW - Instandsetzungsmörtel KW - Betoninstandsetzung KW - Instandsetzungssysteme KW - Polymer-Zement Beton (PCC) KW - Polymer-Zement Spritzbeton (SPCC) KW - Repair mortar KW - Concrete rehabilitation KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2011 SN - 1864-7251 SN - 0947-4498 VL - 17 IS - 3/4 SP - 169 EP - 180 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-24479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Hauer, B. T1 - Assessment-concept for the sustainable use of secondary aggregates in concrete T2 - International Conference (RILEM-Week) on Advances in Construction Materials through Science and Energineering CY - Hong Kong, China DA - 2011-09-05 PY - 2011 AN - OPUS4-24470 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Rogge, Andreas T1 - Wärmebehandlung und Autoklavierung von UHPC - Einfluss auf Mikrostruktur und mechanische Eigenschaften T2 - Feuerfestkolloquium 2011, Fachsymposium "Fertigteile aus UHPC - Fertigungspartner Feuerfestindustrie?" CY - Aachen, Germany DA - 2011-10-20 PY - 2011 AN - OPUS4-24745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pistol, Klaus A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. ED - Koenders, E.A.B. ED - Dehn, F. T1 - The mode of action of polypropylene fibres in high performance concrete at high temperatures N2 - It has been shown in fire tests that polypropylene fibres reduce or avoid explosive spalling of high performance concrete. In the critical temperature ränge up to 300 °C the permeability of HPC increases by using polypropylene fibre. Due to this the water vapour, which is the main reason for explosive spalling, can escape. There exist different theories in the literature conceming the micro structural mechanisms, which cause an increase in the permeability. Within the framework of an internal research project at BAM an innovative methodology was developed for experimental verifying of existing theories and to get new insights into this problem The methodology used is unique and has been undertaken here for the first time. This consists of the combination of acoustic emission and ultrasonic measurement during temperature loading and the non-destructive micro structural analysis of cooled down samples with the aid of micro X-ray computed tomography. For the validation of the nondestructive test methods scanning electron microscopic images of prepared samples were undertaken. The results show that due to the thermal decomposition of the polypropylene fibres micro canals emerge. These are connected due to a simultaneous micro cack formation. T2 - 2nd International RILEM workshop on concrete spalling due to fire exposure CY - Delft, The Netherlands DA - 05.10.2011 KW - Spalling KW - Polypropylene fibres KW - High performance concrete KW - Acoustic emission KW - X-ray computed tomography KW - Scanning electron microscopy PY - 2011 SN - 978-2-35158-118-6 SP - 289 EP - 296 PB - RILEM Publications AN - OPUS4-24835 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Drochytka, R. ED - Bohus, S. T1 - Natural stone reprofiling in cultural heritage with modular repair mortars N2 - Whenever the preservation of original substance obtains priority in a restoration task, reprofiling techniques using repair mortars are a welcome solution. For ordinary concrete repair aesthetic aspects are of minor importance whereas for the restoration of natural stone elements they come to the fore. Especially for listed buildings and monuments, historico-cultural and aesthetical interests become the ruling Parameters for planning and execution of restoration tasks. Nevertheless the technical and constructive requirements have to be considered and deterioration processes have to be understood to ensure sustainability and durability of the repair task. Due o differences in the Chemical and mineralogical composition, natural stone provides a vast variety of texture and colour. Also the range of different mechanical and durability related properties is far wider than found with concrete for example. A research project dealing with the development of a modular repair mortar System for natural stone is currently set up at the BAM. To provide the conservator with the best possible options to match colour, texture and technical requirements, the System will be setup on a modular basis. Several different binder Systems on basis of cement, lime and sodium Silicate as well as polymer based Systems are planned, which can be combined with different aggregate compositions and different pigments. To evaluate the mortar performance, test procedures will be defined for tests on mortar samples and on composite specimens. In the paper the experimental Programme will be explained and first results will be presented and discussed. T2 - 2nd WTA - Internaitonal PhD Symposium - Building materials and buidling technology to preserve the built heritage CY - Brno, Czech Republic DA - 06.10.2011 PY - 2011 SN - 978-3-937066-21-9 SN - 0947-6830 N1 - Serientitel: WTA-Schriftenreihe – Series title: WTA-Schriftenreihe IS - 36 SP - 208 EP - 216 PB - WTA Publications AN - OPUS4-24837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Kühne, Hans-Carsten A1 - Meng, Birgit A1 - Rogge, Andreas T1 - Wärmebehandlung und Autoklavierung von UHPC - Neue Perspektiven für die Betonfertigteilindustrie T1 - Heat curing and autoclaving of UHPC - New perspectives for the precast concrete industry N2 - Das Gefüge von UHPC ist durch eine dicht gepackte und fehlstellenarme Matrix gekennzeichnet. Eine zusätzliche Optimierung ist durch eine Wärmebehandlung bzw. hydrothermale Nachbehandlung (Autoklavierung) unter einem Wasserdampfsättigungsdruck möglich. Die Wärmebehandlung von Beton ist ein in der Betonfertigteilindustrie geläufiges Verfahren, um die Erstarrungszeit zu verkürzen und höhere Frühfestigkeiten zu erreichen. N2 - The structure of UHPC is characterized by a densely packed matrix with only a small number of voids; it can be enhanced further by heat curing or hydrothermal Treatment (autoclaving) subject to water vapor pressure. Heat curing of concrete is commonly applied in the precast industry in Order to shorten its setting time and achieve higher early strengths. KW - Ultrahochleistungsbeton KW - Stahlfasern KW - Nachbehandlung KW - Mikrostruktur KW - Festigkeit PY - 2011 SN - 0373-4331 SN - 1865-6528 N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 77 IS - 10 SP - 46 EP - 47 PB - Bauverl. CY - Gütersloh AN - OPUS4-24838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. T1 - Influence of polypropylene fibres on the thermal strain of high strength concrete at high temperatures N2 - This paper presents the results of an experimental study on the influence of polypropylene (PP) fibres on the thermal strain of high strength concrete (HSC) at temperatures up to 750°C. Concerning this topic only few results can be found in the literature and systematic investigations are missing. However, basic knowledge is necessary to understand the internal damage processes as well as for structural design. To explain the differences in the thermal strain of HSC with and without addition of PP fibres the internal damage processes were investigated with acoustic emission (AE) analysis and ultrasound (US). Furthermore the weight loss was measured continuously during heating to monitor the drying of the specimen. This novel approach by combining these different methods with strain measurements at high temperatures allows the integral description of the internal damage processes. The results reveal significant differences in the thermal strain of HSC when PP fibres are added. Between 200°C and 250°C the thermal strain of HSC with PP fibres is superimposed by shrinkage caused by accelerated drying. Above 250°C it is lower than that of plain HSC without PP fibres. It is supposed that it is caused by a more homogeneous distribution of micro cracks whereby the fibre beds acting as defects in the concrete. Hence this paper gives a contribution to the general understanding of the impact of PP fibres in HSC at high temperatures and points out the influence of the fibres on the thermal strain of HSC. KW - High performance concrete KW - High temperatures KW - Polypropylene fibres KW - Thermal strain KW - Acoustic emission KW - Ultrasound PY - 2011 DO - https://doi.org/10.1260/2040-2317.2.3.173 SN - 2040-2317 VL - 2 IS - 3 SP - 173 EP - 179 PB - Multi-Science Publ. Co. CY - Brentwood AN - OPUS4-24817 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Herbst, Tristan A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Hauer, B. T1 - Sustainable evaluation - concept to assess the applicability of secondary aggregates in concrete N2 - Nowadays there are several applications of mineral recycling materials and residues. At present an assessment method for the use of secondary raw materials, which considers sustainability aspects, does not exist. In the framework of the German DAfStb/BMBF research project “Sustainable Building with Concrete” an assessment concept was developed. It includes the following four assessment steps: I. Basic considerations, II. Advantages for sustainable construction, III. Alternative paths for application, and IV. Sensitivity analysis. The concept was developed on the basis of recycled concrete aggregates, which are already used according to German standards. Afterwards, it was applied and verified by the evaluation of the utilisation of municipal solid waste incinerator bottom ashes (referred to MSWI bottom ashes). T2 - 2011 Helsinki world sustainable building conference CY - Helsinki, Finland DA - 18.10.2011 KW - Sustainable building KW - Sustainability aspects KW - Secondary materials KW - Secondary aggregates in concrete KW - Energy and material resources KW - Assessment concept PY - 2011 SN - 978-951-758-534-7 SN - 0356-9403 SP - 1 EP - 8 AN - OPUS4-24781 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vasilic, Ksenija A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Roussel, N. T1 - Flow of fresh concrete through steel bars: a porous medium analogy N2 - Although being a very promising area of concrete technology, computational modeling of fresh concrete flow is a comprehensive and time consuming task. The complexity and required computation time are additionally increased when simulating casting of heavily reinforced sections, where each single reinforcement bar has to be modeled. In order to improve the computation speed and to get closer to a practical tool for simulation of casting processes, an innovative approach to model reinforced sections is proposed here. The basic idea of this approach is to treat the reinforcement zone as a porous medium in which a concrete is propagating. In the present paper, the numerical implementation of this concept is described. A methodology allowing for the computation of the equivalent permeability of the steel bars network is suggested. Finally, this numerical technique efficiency is evaluated by a comparison with experimental results of model fluids casting in model formworks. KW - Fresh concrete (A) KW - Rheology (A) KW - Modeling (E) KW - Permeability (C) KW - Yield stress KW - Simulation KW - Flow of mortar KW - Flow of concrete PY - 2011 DO - https://doi.org/10.1016/j.cemconres.2011.01.013 SN - 0008-8846 SN - 1873-3948 VL - 41 IS - 5 SP - 496 EP - 503 PB - Pergamon Press CY - New York, NY AN - OPUS4-25532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs A1 - Kühne, Hans-Carsten T1 - Nanotechnologie im Bauwesen T2 - Jährliche Fachveranstaltung des deutschen Beton- und Bautechnik-Vereins (DBV) - Hauptausschuss Betontechnologie Veranstalter:DBV, BAM -VII:1 CY - Berlin, Germany DA - 2007-06-20 PY - 2007 AN - OPUS4-14995 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wiens, U. A1 - Meng, Birgit A1 - Fontana, Patrick T1 - Mikrorissbildung in Hochleistungsbeton - Vom Modell zu den Auswirkungen auf Betoneigenschaften KW - Hochleistungsbeton KW - Silikastaub KW - Mikrorissbildung PY - 2007 SN - 0005-9846 VL - 57 IS - 6 SP - 256 EP - 265 PB - Verlag Bau + Technik CY - Erkrath AN - OPUS4-15009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Meng, Birgit ED - Jürgen Berger, ED - Fischer, Andreas ED - Stefan Himburg, ED - Michael Kramp, T1 - Einsatz innovativer Verfahren der Bauwerksdiagnose für die Bestandserfassung - ausgewählte Fallbeispiele T2 - Berliner Hoch- und Ingenieurbaukolloquium BHIK 07 "Bauen im Bestand - Innovationen aus Wissenschaft und Praxis" CY - Berlin, Deutschland DA - 2007-11-23 KW - Bauwerksdiagnose KW - Zerstörungsfreie Prüfung KW - Radar KW - Ultraschall KW - Röntgen-Computertomografie PY - 2007 SN - 978-3-8322-6723-0 SN - 0945-067X SP - 27 EP - 46 PB - Shaker CY - Aachen AN - OPUS4-16325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bahlmann, Stefanie A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Hauer, B. A1 - Klein, H. A1 - Müller, C. A1 - Ruppert, J. A1 - Schäfer, S. A1 - Spanka, G. A1 - Wassing, W. A1 - Zunzer, U. T1 - Potenziale des Sekundärstoffeinsatzes im Betonbau - Teilprojekt B1 KW - Nachhaltigkeit KW - Sekundäre Gesteinskörnung KW - Rezyklierte Gesteinskörnung KW - Betonbrechsand KW - Müllverbrennungsasche PY - 2007 SN - 978-3-410-65772-9 SN - 0171-7197 N1 - Geburtsname von Bahlmann, Stefanie: Ramolla, S. - Birth name of Bahlmann, Stefanie: Ramolla, S. IS - 572 SP - 131 EP - 222 PB - Beuth AN - OPUS4-16361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs T1 - Nanotechnologie im Beton - Entwicklungsstand und Innovationschancen KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2008 SN - 978-3-7625-3624-6 VL - 56 SP - 186 EP - 190 PB - Bauverlag BV CY - Gütersloh AN - OPUS4-16316 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Meng, Birgit A1 - Kühne, Hans-Carsten A1 - Nemecek, J. A1 - Fontana, Patrick ED - E. Fehling, ED - Schmidt, M. ED - S. Stürwald, T1 - Micro texture and mechanical properties of heat treated and autoclaved Ultra High Performance Concrete (UHPC) KW - Ultra high performance concrete KW - Micro texture KW - Mechanical strength KW - Secondary cemetitious materials PY - 2008 SN - 978-3-89958-376-2 IS - 10 SP - 213 EP - 220 CY - Kassel AN - OPUS4-16726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Müller, Urs A1 - Maier, Bärbel T1 - Vermeidung stofflicher Probleme bei der Wärmebehandlung von Beton T2 - "Beton für alle Wetter" Fachseminar CY - Berlin, Germany DA - 2005-11-24 PY - 2005 AN - OPUS4-11473 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Meng, Birgit ED - Jensen, O. T1 - Influence of mix composition on early-age autogenous deformations of cement pastes T2 - International RILEM Conference on Volume Changes of Hardening Concrete: Testing and Mitigation CY - Lyngby, Denmark DA - 2006-08-20 KW - Autogenes Schwinden KW - Hochleistungsbeton KW - Hydratation KW - Porenstruktur KW - Zusatzstoffe KW - Zusatzmittel PY - 2006 SN - 2-351-58004-4 SP - 261 EP - 272 PB - RILEM Publications CY - Bagneux AN - OPUS4-12672 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs T1 - Nano-Gefügeanalytik als Optimierungsgrundlage für innovative Baustoffe T2 - Fachtagung "Nanotechnologie im Bauwesen - Nanooptimierte Hightech-Baustoffe" CY - Kassel, Germany DA - 2007-05-09 PY - 2007 AN - OPUS4-14851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Bahlmann, Stefanie A1 - Rübner, Katrin A1 - Meng, Birgit T1 - Untersuchungen zur Verwertung industrieller Reststoffe als Primärrohstoffsubstitut in Mörtel und Beton T2 - GDCh-Fachtagung Bauchemie CY - Siegen, Deutschland DA - 2007-09-27 KW - Verwertungspotential KW - Industrielle Reststoffe KW - Filterrückstand KW - Papierasche KW - Biomasseasche KW - Edelstahlschlacke KW - Zumahlstoff KW - Betonzusatzstoff PY - 2007 SN - 3-936028-50-8 N1 - Geburtsname von Bahlmann, Stefanie: Ramolla, S. - Birth name of Bahlmann, Stefanie: Ramolla, S. VL - 37 SP - 237 EP - 244 AN - OPUS4-16095 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Urs A1 - Meng, Birgit A1 - Fontana, Patrick T1 - Nano-Gefügeanalytik - Die Optimierung von Baustoffen KW - Nanotechnologie KW - Baustoffe PY - 2008 SN - 1618-7881 VL - 1 IS - 1 SP - 18 EP - 21 PB - GIT Verl. CY - Darmstadt AN - OPUS4-17438 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brockmann, T. A1 - Fontana, Patrick A1 - Meng, Birgit A1 - Müller, Urs T1 - Nanotechnologie im Bauwesen N2 - Zu den Zielen der Nanotechnologie gehört die Entwicklung, Produktion und Anwendung von Materialien und Werkstoffen mit völlig neuartigen Leistungsspektren. Für die Baupraxis und die Materialforschung lassen sich über den Einsatz der Nanotechnologie Ziele wie die Optimierung von Baustoffeigenschaften, Vermeidung von Schäden und neue Funktionalitäten definieren. Der vorliegende Beitrag gibt einen Überblick über mögliche Anwendungsbereiche der Nanotechnologie im Bausektor, wie z. B. zementgebundene Baustoffe, Außen- und Dachfassaden, Fenster und Verglasungen, Brandschutz, Inneneinrichtung und Infrastrukturbau. Zudem werden aktuelle Forschungsarbeiten mit nanowissenschaftlichem und nanotechnologischem Schwerpunkt im Bereich baustoffbezogener Materialien der Bundesanstalt für Materialforschung und -prüfung (BAM) in Berlin vorgestellt. Die Forschungstätigkeiten beziehen sich zum einen auf die Modifikation der Hydratphasen in Ultra-Hochleistungsbeton (UHPC) und zum anderen auf die Weiterentwicklung von Anti-Graffiti-Systemen. KW - Nanotechnologie KW - Forschung und Entwicklung KW - UHPC KW - Anti-Graffiti PY - 2008 DO - https://doi.org/10.1002/best.200800624 SN - 0005-9900 SN - 1437-1006 VL - 103 IS - 7 SP - 446 EP - 454 PB - Ernst CY - Berlin AN - OPUS4-17731 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Weise, Frank A1 - Pirskawetz, Stephan A1 - Meng, Birgit ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Application of innovative testing methods for the quasi non-destructive assessment of the material condition in hydraulic engineering structures T2 - First Internatonal RILEM Symposium "on Site Assessment of Concrete, Masonry and Timber Structures" (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Quasi non-destructive assessment KW - Hydraulic engineering structures KW - Radar KW - Ultrasonic and ray PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 1 EP - 10 PB - RILEM Publications AN - OPUS4-18356 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs A1 - Kühne, Hans-Carsten T1 - Nanotechnologische Anwendungen im Baustoffbereich T2 - Nanotechnologie und Bauwesen (NanoTecture) CY - Düsseldorf DA - 2006-12-05 KW - Nanotechnologie KW - Analytik KW - Gefüge KW - Zement KW - Beton PY - 2006 SP - 13 EP - 27 CY - Düsseldorf AN - OPUS4-15703 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Fontana, Patrick A1 - Pirskawetz, Stephan A1 - Weise, Frank A1 - Meng, Birgit T1 - Detection of early-age cracking due to restrained autogenous shrinkage T2 - Symposium "Advances in Construction Materials" (ACM) CY - Stuttgart DA - 2007-07-23 KW - Hochleistungsbetone KW - Autogenes Schwinden KW - Frühe Rissbildung KW - Schallemissionsanalyse PY - 2007 SN - 978-3-540-72447-6 SP - 489 EP - 496 PB - Springer CY - Stuttgart AN - OPUS4-15708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Frank A1 - Pirskawetz, Stephan A1 - Müller, Urs A1 - Meng, Birgit T1 - Charakterisierung der Schädigungsprozesse in Betonen mit innovativen Prüftechniken KW - Beton KW - Naturstein KW - Schadensanalyse KW - Innovative Prüftechnik PY - 2007 IS - 13 SP - 14 EP - 20 AN - OPUS4-15715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Frank A1 - Pirskawetz, Stephan A1 - Müller, Urs A1 - Meng, Birgit T1 - Charakterisierung der Schädigungsprozesse in Betonen mit innovativen Prüftechniken KW - Beton KW - Schädigungsprozesse KW - Zerstörungsarme und zerstörungsfreie Prüfverfahren PY - 2006 SN - 0005-9846 VL - 56 IS - 6 SP - 268 EP - 275 PB - Verlag Bau + Technik CY - Erkrath AN - OPUS4-14403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühne, Hans-Carsten A1 - Haamkens, Frank A1 - Maultzsch, Matthias A1 - Meinhold, Uwe A1 - Meng, Birgit ED - Stark, J. T1 - Instandsetzung von Beton mit geringen Festigkeiten T2 - 16. Ibausil - Internationale Baustofftagung CY - Weimar, Germany DA - 2006-09-20 KW - Wasserbau KW - Beton mit geringer Festigkeit KW - Instandsetzung KW - Leistungsfähigkeit PY - 2006 SN - 3-00-018263-2 IS - Band 2 SP - 2-1173 - 2-1180 PB - Bauhaus-Univ. CY - Weimar AN - OPUS4-14475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs A1 - Kühne, Hans-Carsten T1 - Nanotechnologische Anwendungen in Baustoffen T2 - Fachgespräch "Nanotechnologie im Bauwesen (Nanoexture) CY - Düsseldorf, Germany DA - 2006-12-05 PY - 2006 AN - OPUS4-14526 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Frank A1 - Meng, Birgit T1 - Identifikation von Schädigungsprozessen in Beton mit innovativen Prüftechniken T2 - Fachtagung des DAfStb "Neue Entwicklungen im Betonbau" CY - Berlin, Germany DA - 2007-03-08 PY - 2007 AN - OPUS4-14608 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Müller, Urs T1 - Nanotechnologische Anwendungen im Baustoffbereich T2 - Branchendialog "Nanotechnologie in der Bauwirtschaft" Bundesmininsterium f. Wirtschaft u. Technologie CY - Berlin, Germany DA - 2007-11-02 PY - 2007 AN - OPUS4-16172 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Weise, Frank T1 - Einsatz innovativer Verfahren der Bauwerksdiagnose für die Bestandserfassung - ausgewählte Beispiele T2 - Berliner Hoch- und Ingenieurbaukolloquium BHK 07 "Bauen im Bestand" CY - Berlin, Germany DA - 2007-11-23 PY - 2007 AN - OPUS4-16443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit T1 - Mikrostruktur und Dauerhaftigkeit zementgebundener Baustoffe T2 - 8. Münchener Baustoffseminar "Dauerhaftigkeit von Betonkonstruktionen - Von den Mechanismen zum Lebensdauermanagement" CY - Munich, Germany DA - 2008-10-10 PY - 2008 AN - OPUS4-18201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Frank A1 - Meng, Birgit A1 - Pirskawetz, Stephan A1 - Müller, Urs T1 - Charakterisierung von Schädigungsprozessen in Betonen mit innovativer Prüftechnik T2 - VDB-Fachtagung 2006 "Beton-Entwicklungen und Tendenzen" CY - Bergisch Gladbach, Germany DA - 2006-04-27 PY - 2006 AN - OPUS4-12372 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Olafur H. Wallevik, ED - Stefan Kubens, ED - Sonja Oesterheld, T1 - Computational modelling of SCC flow: Reinforcement network modelled as porous medium T2 - 3rd International RILEM symposium on rheology of cement suspensions such as fresh concrete CY - Reykjavik, Iceland DA - 2009-08-19 KW - SCC KW - Modelling KW - CFD PY - 2009 SN - 978-2-35158-091-2 IS - PRO 68 SP - 148 EP - 154 PB - RILEM Publications AN - OPUS4-20238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Rübner, Katrin A1 - Meng, Birgit A1 - Müller, Urs ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Investigating the original water content of concrete N2 - This chapter provides an overview of methods that are commonly used for the analysis of the original water content of fresh and hardened concrete. The methods consist of direct methods, which detect the water content or the water/cement ratio primarily, as well as indirect methods, which measure other material characteristics related to the water content. KW - Concrete analysis KW - Water content KW - Water/cement ratio KW - Pore structure analysis PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 11 SP - 217 EP - 241 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21814 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Development of a modular system for the protection and repair of concrete structures KW - Repair mortar KW - Repair systems KW - Polymer cement concrete (PCC) KW - Sprayed polymer cement concrete (SPCC) PY - 2010 SN - 1864-7251 SN - 0947-4498 VL - 16 IS - 4/5 SP - 387 EP - 400 PB - Aedificatio Publ. CY - Freiburg AN - OPUS4-22773 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Lehmann, Christian A1 - Fontana, Patrick A1 - Meng, Birgit T1 - Effects of autoclaving on the nano structure and phase composition of ultra high performance concrete T2 - 12th Euroseminar on microscopy applied to building materials CY - Dortmund, Germany DA - 2009-09-15 KW - UHPC KW - Micro structure KW - Autoclaving KW - Phase stability KW - C-S-H PY - 2009 SN - 978-3-00-028697-1 SP - 351 EP - 359 AN - OPUS4-20622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Aguiar, J. B. ED - Jalali, S. ED - Camoes, A. ED - Ferreira, R.M. T1 - MODINSYS modular systems for the protection and repair of concrete structures T2 - 13th International Congress on polymers in concrete - ICPIC 2010 CY - Funchal-Madeira, Portugal DA - 2010-02-11 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - SPCC KW - PCC KW - Repair mortar KW - Modular systems KW - Concrete rehabilitation PY - 2010 SN - 978-972-99179-4-3 SP - 697 EP - 704 CY - Funchal-Madeira, Portugal AN - OPUS4-20937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Meng, Birgit A1 - Müller, Urs A1 - Rübner, Katrin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Components in concrete and their impact on quality: an overview KW - Concrete KW - Cement KW - Aggregate KW - Microstructure KW - Durability PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 5 SP - 82 EP - 93 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Müller, Urs A1 - Meng, Birgit A1 - Rübner, Katrin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Analysis of solid components and their ratios in reinforced concrete structures KW - Concrete analysis KW - Concrete petrography KW - Optical microscopy KW - Scanning electron microscopy KW - Micro X-ray fluorescence analysis PY - 2010 SN - 978-1-84569-560-6 VL - 1 IS - Chapter 9 SP - 180 EP - 197 PB - Woodhead Publishing Ltd CY - Oxford AN - OPUS4-21050 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vasilic, Ksenija A1 - Roussel, N. A1 - Meng, Birgit A1 - Kühne, Hans-Carsten ED - Khayat, K.H. ED - Feys, D. T1 - Computational modeling of SCC flow through reinforced sections N2 - Computational modeling of fresh SCC flow is a comprehensive and time consuming task. The computational time is additionally increased when simulating casting of reinforced sections, where each single reinforcement bar has to be modeled. In order to deal with this issue and to decrease the computational time, an innovative approach of treating a reinforcement network as a porous medium is applied. This contribution presents the model for concrete flow through reinforced sections, based on Computational Fluid Dynamics (CFD), coupling a single-phase flow model for SCC and a continuum macroscopic model for porous medium. In the last part of this paper, numerical simulations are compared with experimental results obtained on model fluids. T2 - SCC2010 - Design, production and placement of self-consolidating concrete CY - Montreal, Canada DA - 2010-09-26 PY - 2010 SN - 978-90-481-9663-0 DO - https://doi.org/10.1007/978-90-481-9664-7_16 N1 - Serientitel: RILEM bookseries – Series title: RILEM bookseries VL - 1 IS - 5 SP - 187 EP - 195 PB - Springer AN - OPUS4-22277 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Littmann, K. T1 - Parameterstudien zum Einfluss von Rezepturveränderungen auf Schwindverhalten, Rissneigung und Steifigkeit mineralischer Instandsetzungsmörtel T2 - 7. Internationales Kolloquium Industrieböden 2010 CY - Ostfildern, Deutschland DA - 2010-12-14 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Haftverbund KW - SPCC KW - PCC PY - 2010 SN - 3-924813-85-X IS - Kap. 2.6 SP - 191 EP - 200 AN - OPUS4-22845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ramge, Peter A1 - Kühne, Hans-Carsten A1 - Meng, Birgit ED - Raupach, M. T1 - Einfluss ausgewählter Modifikationen der Mischungszusammensetzung auf die Eigenschaften von Instandsetzungsmörteln N2 - Trotz der zahlreichen Möglichkeiten zur Beeinflussung der Mörteleigenschaften durch Mischungsmodifikationen ist es nahezu unmöglich, einzelne Eigenschaften unabhängig von anderen zu verändern. Bei einer Mischungsoptimierung muss im Einzelfall immer entschieden werden, welcher der gewünschten Eigenschaften die höchste Priorität zukommt. Anhand von Parameterstudien wird im vorliegenden Artikel verdeutlicht, wie es für bestimmte Anwendungen sinnvoll sein kann, die Verschlechterung einzelner Eigenschaften zu akzeptieren, wenn dadurch eine für den speziellen Einsatzfall essenzielle Eigenschaft verbessert werden kann. Die komplexen Wechselwirkungen der einzelnen Bestandteile fuhren dazu, dass auch scheinbar widersprüchliche Kombinationen von Zusatzmitteln im Einzelfall erforderlich werden können. Zur Anpassung der meisten Mörteleigenschaften gibt es verschiedene Möglichkeiten der Zielerreichung mit jeweils unterschiedlichen Nebeneffekten. Frisch- und Festmörteleigenschaften sind dabei gleichermaßen zu beachten. T2 - 2. Kolloquium "Erhaltung von Bauwerken" CY - Ostfildern/Stuttgart, Germany DA - 25.01.2011 KW - Betoninstandsetzung KW - Instandsetzungsmörtel KW - Modulare Systeme KW - Polymer cement mortar (PCC) KW - Sprayed polymer cement mortar (SPCC) PY - 2011 SN - 3-924813-87-6 SP - 213 EP - 221 AN - OPUS4-23218 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Maier, Bärbel T1 - Vermeidung stofflicher Probleme bei der Wärmebehandlung von Beton T2 - BMO-Fachtagung "Beton für alle Wetter", BAM CY - Berlin, Germany DA - 2012-11-22 PY - 2012 AN - OPUS4-27110 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Fontana, Patrick A1 - Maier, Bärbel T1 - Vermeidung stofflicher Probleme bei der Wärmebehandlung von Beton T2 - Fachtagung 'Beton für alle Wetter' CY - Berlin, Germany DA - 2012-11-22 PY - 2012 SP - 109 EP - 116 AN - OPUS4-27175 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schießl, P. A1 - Meng, Birgit A1 - Rößler, G. A1 - Schröder, P. A1 - Schwamborn, B. A1 - Spengler, A. A1 - Wallner, B. ED - Zilch, K. ED - Diederichs, C.J. ED - Katzenbach, R. ED - Beckmann, K. J. T1 - Konstruktiver Ingenieurbau und Hochbau KW - Baustoffe KW - Beton KW - Bindemittel KW - Zement PY - 2012 SN - 978-3-642-14449-3 IS - Kap. 3.1 SP - 966 EP - 1038 PB - Springer ET - 2. Aufl. AN - OPUS4-25844 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pistol, Klaus A1 - Weise, Frank A1 - Meng, Birgit ED - Roussel, N. ED - Bessaies-Bey, H. T1 - High temperature behaviour of self-compacting concrete with limestone powder N2 - Although concrete in general is a non-combustible material, the fire resistance of concrete structures depends, to a large extent, on the mechanical material behaviour. Fire tests have shown that SCC is often susceptible to explosive spalling due to fire exposure, in a similar manner to HPC. But there are hardly any studies available that report properties of specimens at high temperatures. T2 - 7th RILEM International conference on self-compacting concrete and of the 1st RILEM international conference on rheology and processing of construction materials CY - Paris, France DA - 02.09.2013 KW - Fire resistance KW - Stress-strain-relation KW - Compressive strenght KW - Polypropylene fibres KW - Self-compacting concrete KW - Thermo mechanical behaviour KW - Fire safety design PY - 2013 SN - 978-2-35158-137-7 SN - 978-2-35158-138-4 SP - 221 EP - 228 PB - RILEM Publications CY - Bagneux, France AN - OPUS4-29985 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pirskawetz, Stephan A1 - Weise, Frank A1 - Meng, Birgit A1 - Rogge, Andreas T1 - Vom Baustoff zum sicheren Bauwerk: Einsatz der Schallemissionsanalyse in der Bauabteilung der BAM N2 - Seit 2006 wird die Schallemissionsanalyse (SEA) in der Abteilung 7 Bauwerkssicherheit der BAM genutzt, um Gefügeveränderungen in Betonen zu untersuchen. Dabei haben sich bis heute im Wesentlichen folgende vier Forschungsbereiche herauskristallisiert: Hydratation Während der Hydratation von Beton ist eine ausgeprägte Schallemissionsaktivität zu beobachten, anhand derer der Hydratationsverlauf nachvollzogen werden kann. Zur Aufklärung der Quellmechanismen der Schallemissionen besteht noch weiterer Forschungsbedarf. Des Weiteren kann mit Hilfe der SEA die frühe Rissbildung in Betonen, hervorgerufen durch autogenes oder plastisches Schwinden, analysiert werden. Alkali-Kieselsäure-Reaktion (AKR) Bei der AKR handelt es sich um eine Reaktion alkaliempfindlicher Gesteinskörnungen mit den Alkalien des Betons bzw. mit extern, z.B. durch Tausalze, zugeführten Alkalien. Dabei werden um die oder in der Gesteinskörnung quellfähige Gele gebildet, die zu einer völligen Zerstörung des Gefüges führen können. Mit der SEA können die Rissbildung detektiert und somit die Schädigungsphasen im Verlauf der AKR identifiziert werden. Brandverhalten Unter Brandeinwirkung platzt die Oberfläche gefügedichter Hochleistungsbetone explosionsartig ab. Um dies zu verhindern und somit den Feuerwiderstand von Bau-teilen aus Hochleistungsbeton zu erhöhen, werden dem Beton Polypropylenfasern beigemischt. Das Schmelzen der Fasern bei einer Temperaturerhöhung trägt zu einer erhöhten Mikrorissbildung bei, die einen Spannungsabbau ermöglicht. Die SEA konnte erfolgreich eingesetzt werden, um diesen Wirkmechanismus der Fasern nachzuweisen und weiter aufzuklären. Ermüdungsverhalten Durch die hohen zyklischen Lasten, für die Türme und Fundamente von Windkraft-anlagen ausgelegt werden müssen, gewinnen gesicherte Kenntnisse über das Ermüdungsverhalten von Betonen an Bedeutung. Mit der SEA ist es bei hochzyklischen Belastungsversuchen an Betonen möglich, den Schädigungsgrad im Verlauf der Beanspruchung zu bestimmen. Die Schallemissionsaktivität eignet sich als Kriterium, um die Versuche bei vorab definierten Schädigungsgraden zu unterbrechen und so Proben für weitergehende Untersuchungen zu gewinnen. Diese Ergebnisse sollen perspektivisch für Überwachungssysteme für Betonbauwerke unter zyklischer Beanspruchung genutzt werden. T2 - 19. Kolloquium Schallemission - Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse CY - Augsburg, Germany DA - 12.09.2013 KW - Bauwerkssicherheit KW - Schallemissionsprüfung KW - Beton KW - Hydratation KW - Alkali-Kieselsäure-Reaktion KW - Brandverhalten KW - Ermüdungsverhalten PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-300290 SN - 978-3-940283-51-1 N1 - Serientitel: DGZfP-Berichtsband – Series title: DGZfP-Berichtsband IS - 142 SP - 1 EP - 12 (Beitrag 10) PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-30029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weise, Frank A1 - von Werder, Julia A1 - Manninger, Tanja A1 - Maier, Bärbel A1 - Fladt, Matthias A1 - Simon, Sebastian A1 - Gardei, Andre A1 - Höhnel, Desirée A1 - Pirskawetz, Stephan A1 - Meng, Birgit T1 - A multiscale and multimethod approach to assess and mitigate concrete damage due to alkali-silica reaction N2 - Alkali-silica reaction (ASR) is a chemical reaction within concrete which can lead over time to cracking and spalling. Due to the complexity of the problem, it still causes damage to concrete constructions worldwide. The publication aims to illustrate the interdisciplinary research of the German Federal Institute for Materials Research and Testing (BAM) within the last 20 years, considering all aspects of ASR topics from the macro to the micro level. First, methods for characterization and assessment of ASR risks and reaction products used at BAM are explained and classified in the international context. Subsequently the added value of the research approach by combining different, preferably nondestructive, methods across all scales is explained using specific examples from a variety of research projects. Aspects covered range from the development of new test-setups to assess aggregate reactivity, to analysis of microstructure and reaction products using microscopical, spectroscopical and X-ray methods, to the development of a testing methodology for existing concrete pavements including in-depth analysis of the visual damage indicator and the de-icing salt input using innovative testing techniques. Finally, research regarding a novel avoidance strategy that makes use of internal hydrophobization of the concrete mix is presented. KW - Mitigation strategies KW - Concrete KW - Damage analysis KW - Alkali silica reaction KW - Road pavement KW - Accelerated testing KW - Non-destructive testing KW - Microstructure PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:101:1-2022052515100075090235 DO - https://doi.org/10.1002/adem.202101346 SN - 1527-2648 VL - 24 IS - 6 SP - 1 EP - 36 PB - Wiley-VCH CY - Weinheim AN - OPUS4-54951 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krütt, Enno A1 - Pirskawetz, Stephan A1 - Wallau, Wilma A1 - Meng, Birgit T1 - Development of an automated 60 °C Concrete Prism Test N2 - ln most of the ASR-test procedures, the expansion of concrete or mortar specimens is used as an indicator to assess the ASR-potential of an aggregate or a specific concrete mix. For these tests, the specimens are stored in an ASR-provoking environment, where the reaction is accelerated by elevated temperature and humidity. To measure the length change, the storage must be interrupted for at least a few minutes. Düring the 60 °C Concrete Prism Test (60 °C-CPT), the specimens are cooled down to 20 °C for 24 hours, to ensure the same hygrothermal conditions for every measurement. This limits the number of measurements during the test period and may lead to additional effects, that probably influence the expansion development. With a recently developed device, it is possible to continuously monitor the expansion ofprisms without interrupting the ASR-provoking storage. Due to the dense database of this automated test, the results can contribute to a better understanding of the ASR-process. This study compares results of the automated and conventional 60 °C-CPT. Tests of different aggregates showed, that the results of the automated and conventional test are consistent, but the expansions during the conventional test are generally higher. Preliminary results led to the conclusion, that the cooling for the measurements leads to additional expansions. Therefore, a modified threshold should be discussed for the automated 60 °C-CPT. T2 - 16th International Conference on Alkali-Aggregate Reaction in Concrete CY - Lisboa, Portugal DA - 31.05.2022 KW - 60 °C-CPT KW - ASR expansion monitoring KW - Automated testing PY - 2021 SN - 978-972-49-2315-4 VL - 1 SP - 789 EP - 799 AN - OPUS4-54553 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Gehlen, C. A1 - Kränkel, T. A1 - Meng, Birgit A1 - Osterminski, K. A1 - Meyer, F. A1 - Schröder, P. ED - Zilch, K. T1 - Baustoffe im Betonbau N2 - In dem Kap. „Baustoffe im Betonbau“ werden zunächst die Baustoffe vorgestellt, die für die Herstellung von Stahlbeton- und Spannbetonbauwerken erforderlich sind (im Wesentlichen Beton, Betonstahl und Spannstahl). Herstellungsbedingte, typische Eigenschaftsprofile der Baustoffe werden aufgezeigt und ein Bezug zu entsprechenden Anwendungsgebieten hergestellt. KW - Betontechnik KW - Bindemittel KW - Betonstahl KW - Spannstahl KW - Herstellungsprozesse KW - Eigenschaften KW - Anwendungsbeispiele PY - 2019 SN - 978-3-658-21749-5 DO - https://doi.org/10.1007/978-3-658-21749-5_15-1 SP - 1 EP - 63 PB - Springer Fachmedien Wiesbaden GmbH AN - OPUS4-54173 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von Werder, Julia A1 - Simon, Sebastian A1 - Meng, Birgit T1 - Internal sulfate resistance of concrete N2 - If the amount of sulfate within the mix design for concrete is not balanced, ettringite formation which first controls solidification continues while the concrete is hardening. Ettringite forms by reaction of sulfate contained in the cement or in some admixture with calcium aluminate (C3A) as cement component. The “late primary ettringite formation” promotes an increase in volume within the hardened concrete leading to cracks. To analyze the effect of substituting part of ordinary Portland cement (OPC) by a treated brown coal fly ash mortar bars were tested according to ASTM C452. This test method was originally developed to extrapolate from the internal to external sulfate attack and is based on the idea that by testing a concrete mixture containing sulfate the process of deterioration is accelerated because it does not have to diffuse into the concrete before reaction first. In addition to the samples prescribed in ASTM C452 further samples in the size of the German SVA procedure were tested also designed for accessing the external sulfate resistance. The results show that while the replacement of 25 % of cement by brown coal fly ash leads to length changes around the limit defined by ASTM, the substitution of 50 % cement exceeded the limit by a multiple. The progress of expansion is the very similar for the two geometries tested. In-situ XRD measurements confirmed that while for pastes made of OPC the formation of ettringite is completed after 20 hours, this is not true for the mixtures containing the brown coal fly ash. In a different study the effect of hydrothermal treatment on the phase composition of ultra-high-performance concrete was analyzed. The results show that the sulfate and aluminate resulting from the decomposition of ettringite are bound into new phases. If this binding is permanent this might allow the larger use of sulfate bearing raw materials. T2 - EuroCoalAsh 2021 Conference CY - Online meeting DA - 02.11.2021 KW - Brown coal fly ash KW - Ettringite KW - Internal sulfate resistance KW - Test methods KW - In-situ XRD KW - Hydrothermal treatment PY - 2021 SP - 131 EP - 137 CY - Thessaloniki AN - OPUS4-54133 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schraut, Katharina A1 - Adamczyk, Burkart A1 - Adam, Christian A1 - Stephan, D. A1 - Meng, Birgit A1 - Simon, Sebastian A1 - von Werder, Julia T1 - Synthesis and characterisation of alites from reduced basic oxygen furnace slags N2 - Basic oxygen furnace slags (BOFS) are by-products of the steelmaking process. Several researchers have studied the production of Portland cement clinker and metallic iron from BOFS via a reductive treatment. In this study, we applied a carbothermal reduction of BOFS in a technical-scale electric arc furnace and characterised the clinker-like products. Those clinker-like non-metallic products (NMPs) had a chemical and mineralogical composition comparable to clinker for ordinary Portland cement (OPC) and contained large elongated alite crystals as major component. The pure NMPs reacted more slowly and achieved a lower degree of hydration compared with commercial OPC. If the reactivity of the products can be further increased by employing specific adaptations, it can be used as a full clinker substitute for OPC. Nevertheless, it is also an option to use the material without further modifications as a cement component or concrete addition, which contributes to the strength development in both cases. KW - BOFS KW - Hydration products KW - Thermal analysis KW - X-ray diffraction PY - 2021 DO - https://doi.org/10.1016/j.cemconres.2021.106518 SN - 0008-8846 VL - 147 SP - 6518 PB - Elsevier Ltd. AN - OPUS4-52939 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bahlmann, Stefanie A1 - Rübner, Katrin A1 - Meng, Birgit T1 - Untersuchungen zur Verwertung industrieller Reststoffe als Ersatz von Primärrohstoffen in Mörtel und Beton N2 - Um den Abbau primärer Rohstoffe zu reduzieren, wurden deponierte oder niederwertig eingesetzte industrielle Reststoffe hinsichtlich einer höherwertigen Verwendung im Betonbau untersucht. Zur Bewertung des Einsatzpotentials als Zementbestandteil oder Betonzusatzstoff erfolgte zunächst eine chemisch-mineralogische und betontechnologische Charakterisierung der Materialien. Reststoffe, die die normativen Anforderungen hinsichtlich der Zementzusammensetzung erfüllen, wurden anschließend zu verschiedenen Anteilen als Zementsubstitut in Mörtel eingesetzt. In vergleichenden Untersuchungen erfolgte die Ermittlung der Frisch- und Festmörteleigenschaften. Kalorimetrische Untersuchungen sollten die Auswirkungen der Reststoffe auf die Zementhydratation zeigen. Ausgewählte Untersuchungsergebnisse an Reststoffen aus der Industrieabwasseraufbereitung, dem Altpapierrecycling, der Biomasseverbrennung und der Metallurgie werden vorgestellt. T2 - 17. Internationale Baustofftagung IBAUSIL 2009 CY - Weimar, Germany DA - 23.09.2009 KW - Industrieabwasseraufbereitung KW - Altpapierrecycling KW - Biomasseverbrennung KW - Metallurgie PY - 2009 AN - OPUS4-36516 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Weise, Frank A1 - Meng, Birgit A1 - Pirskawetz, Stephan A1 - Voland, K. T1 - Influence of simultaneous cyclic loading and external alkali supply on the alkali-silica reaction in concrete pavements N2 - In recent years the German motorway network has seen an increase in the occurrence of damage to concrete road surfaces which can be attributed to the alkali-silica reaction (ASR). In view of the often drastically reduced life expectancy of road surfaces due to ASR, research activity in this field has notably increased. Alongside preventative measures in concrete technology, the main research focus up to now has been the development of performance-oriented testing procedures for ASR prevention. This included more specifically the accelerated simulation of climatic effects and external alkali penetration on road surfaces. The effects of mechanical pre-damage resulting from cyclic traffic loading and climatic impact had previously not been taken into consideration. Since 2011, the five-partner research group 1498 sponsored by the German Research Foundation (DFG) has been pursuing research on how simultaneous cyclic loading and external alkali penetration impacts destructive ASR in road surface concretes. The depiction of the myriad degradation and transport processes necessary for an understanding of these effects requires close interaction between experiments and their multi-scale modelling. This paper aims to focus on the aforementioned experiments by means of innovative testing techniques. The research is founded on a series of cyclic fatigue tests performed on large-format beams, both with and without previous application of a sodium chloride (NaCl) solution, with simultaneous tracking of crack development. Subsequently, smaller test specimens were extracted from the pre-damaged beams for further experiments. These included the spatial visualization and quantification of fatigue-induced cracks using micro X-ray 3D-computed tomography (3D-CT). Additionally, the effects of fatigue-induced cracks on alkali transport were investigated using Laser-Induced Breakdown Spectroscopy (LIBS). Subsequent storage of the small-format test specimens, with and without cyclic pre-damage, in an ASR-conducive environment then provided initial findings on the influence of fatigue-induced predamage on the ASR. T2 - 15th International Conference on Alkali-Aggregate reaction (ICAAR 2016) CY - Sao Paulo, Brazil DA - 03.07.2016 KW - concrete pavements KW - alkali-silica-reaction KW - fatigue KW - damage monitoring PY - 2016 SP - Paper 191 AN - OPUS4-37142 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werner, Daniel A1 - Meng, Birgit A1 - Weise, Frank T1 - Influence of aggregate size on the damage potential of alkali-silica reaction N2 - The susceptibility of different aggregate types used in concrete to ASR is strongly associated with their petrography. The aim of this study is to assess the influence of the aggregate size on the ASR potential, in particular applied to the sand fractions in the size range of 0.125-4 mm. The investigation concept is based on the hypothesis that at a specific particle size reactive aggregates could change their characteristic influence in mitigating ASR instead of promoting it. For the study of the size dependent behaviour mortars are prepared, considering aggregates of different reactivity, including very reactive, slow-late and quasi non-reactive types. The analysis is based on a stepwise substitution concept, in which mortars with a constant overall grain size distribution are compared, while only one size fraction of the non-reactive base aggregate is substituted by a reactive aggregate type of this specific size fraction. For the expansion experiments an accelerated mortar bar test (80°C, immersed in NaOH solution) was applied. The results show that the slow-late reactive greywacke yielded a strong reduction of the expansion below an aggregate size in the range of 0.5-1 mm. On the other side with the very reactive borosilicate glass, the expansions increased steadily with decreasing size. To validate if the acquired expansions were caused by ASR, thin sections were analysed. Mainly, higher expansion values were consistent with extensively more amounts of ASR indicators. T2 - 15th International Conference on Alkali-Aggregate Reaction (ICAAR 2016) CY - Sao Paulo, Brazil DA - 03.07.2016 KW - alkali-silica-reaction KW - building materials KW - concrete KW - durability PY - 2016 SP - Paper 194 AN - OPUS4-37143 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Selleng, Christian A1 - Meng, Birgit A1 - Fontana, Patrick ED - Fehling, E. ED - Middendorf, B. ED - Thiemicke, J. T1 - Phase composition and strength of thermally treated UHPC N2 - Thermal treatment improves the excellent properties of UHPC. Recent studies have shown that an increase in compressive strength of more than 30 % is possible. However, the accurate conditions of thermal treatment for a maximal strength are considered as yet undetermined. A multitude of parameters can be varied: temperature, pressure, water saturation, and duration of the process steps. These parameters influence the phase development and in consequence the macroscopic properties of UHPC. The primary objective of the presented study was the optimisation of the conditions for thermal treatment, concerning compressive strength. It focuses on pre-storage time and duration of the treatment at defined temperatures and pressures (90 °C and 185 °C/1.1MPa). As expected, experimental results showed a fundamental change of phase composition in hydrothermally treated UHPC in comparison to standard cured UHPC: Ettringite decomposes at higher temperatures and is absent after thermal treatment; the amount of portlandite and clinker phases decreases. The change of phase composition is accompanied by increased compressive strength. Experimental studies of calcium-silicate-systems at hydrothermal conditions predict the formation of the crystalline C-S-H phase tobermorite. In fact, this is a typical phase occurring in other hydrothermally treated calcium-silicate-systems like Autoclaved Aerated Concrete (AAC). Commonly, high strength is attributed to the presence of tobermorite; however, in the presented study tobermorite was not detected in the hydrothermally treated UHPC. Therefore, tobermorite cannot be responsible for the increased strength of hydrothermally treated UHPC. In conclusion the development of phases and strength of UHPC at hydrothermal conditions differs fundamentally from AAC and the experimental studies with water saturation. Results of these systems cannot be transferred to UHPC. In thermally treated UHPC, the hydration of clinker is enhanced and the puzzolanic reaction is intensified. Hence, more C-S-H is formed that fills pores and cracks, leading to a denser structure and finally to higher strength. T2 - 4th International Symposium on Ultra-High Performance Concrete and High Performance Materials (HiPerMat) CY - Kassel, Germany DA - 09.03.2016 KW - Ultra-high performance concrete KW - Thermal treatment KW - Compressive strength KW - Tobermorite KW - C-S-H KW - Building Materials PY - 2016 SN - 978-3-7376-0094-1 VL - 27 SP - 7 EP - 8 PB - kassel university press GmbH CY - Kassel AN - OPUS4-36872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Simon, Sebastian A1 - Meng, Birgit A1 - Selleng, Christian T1 - A new sample holder for fast xrd investigation on UHPC N2 - A new sample holder is described in this poster. It was developed in BAM for fast XRD investigation on UHPC (ultra high performance concrete). Results measuring solid, i.e. not pulverized, samples are shown. T2 - GeoBerlin 2015 CY - Berlin, Germany DA - 04.10.2015 KW - Building Materials KW - UHPC KW - X-ray diffractometry PY - 2015 AN - OPUS4-36949 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pistol, Klaus A1 - Weise, Frank A1 - Meng, Birgit A1 - Diederichs, U. T1 - Polypropylene fibres and micro cracking in fire exposed concrete N2 - Though, concrete in general is a non-combustible building material, modern High Performance Concrete (HPC) is very susceptible to violent explosive spalling during a fire attack. This requires protective measures for fire safety design of concrete structures. The current most worthwhile method to prevent explosive spalling is the addition of monofilament Polypropylene fibres (PP-fibres). However, since it has become common knowledge that PP-fibres are suitable for fire safety design, a variety of theories concerning the mode of action of PP-fibres have been suggested. The present article summarizes the most important hypothesis and presents an innovative method for the analysis of micro structural processes in heated specimens. The results show that due to the thermal decomposition of PP-fibres capillary channels are created. Simultaneously, a netlike micro crack formation occurs, which connects these capillary channels. This enables the relief of internal stresses (mechanical effect) and the formation of a permeable transport system for the escaping water vapour (permeation effect). KW - Concrete KW - Fire Spalling KW - Micro-Crack KW - Polypropylene Fibres PY - 2014 DO - https://doi.org/10.4028/www.scientific.net/AMR.897.284 SN - 1022-6680 SN - 1662-8985 VL - 897 SP - 284 EP - 289 PB - Trans Tech Publ. CY - Zurich AN - OPUS4-30383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stroh, Julia A1 - Schlegel, Moritz-Caspar A1 - Irassar, E.F. A1 - Meng, Birgit A1 - Emmerling, Franziska T1 - Applying high resolution SyXRD analysis on sulfate attacked concrete field samples N2 - High resolution synchrotron X-ray diffraction (SyXRD) was applied for a microstructural profile analysis of concrete deterioration after sulfate attack. The cement matrices consist of ordinary Portland cement and different amounts of supplementary cementitious materials, such as fly ash, natural pozzolana and granulated blast furnace slag. The changes of the phase composition were determined along the direction of sulfate ingress. This approach allows the identification of reaction fronts and zones of different phase compositions and conclusions about the mechanisms of sulfate attack. Two reaction fronts were localized in the initial 4 mm from the sample surface. The mechanism of deterioration caused by the exposition in the sulfate-bearing soil is discussed. SyXRD is shown to be a reliable method for investigation of cementitious materials with aggregates embedded in natural environments. KW - X-ray diffraction (B) KW - High resolution KW - Degradation (C) KW - Sulfate attack (C) KW - Concrete (E) PY - 2014 DO - https://doi.org/10.1016/j.cemconres.2014.07.015 SN - 0008-8846 SN - 1873-3948 VL - 66 SP - 19 EP - 26 PB - Pergamon Press CY - New York, NY AN - OPUS4-31253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Pirskawetz, Stephan A1 - Weise, Frank A1 - Meng, Birgit ED - Nothnagel, R. ED - Twelmeier, H. T1 - Zwangsinduzierte Rissbildung in Hochleistungsbeton durch autogenes Schwinden N2 - In diesem Beitrag werden Untersuchungsergebnisse vorgestellt, die den Einfluss von Mikrosilica auf die Selbstaustrocknung und das damit verbundene autogene Schwinden der Bindemittelmatrix von Hochleistungsbetonen beschreiben. Die dadurch hervorgerufenen Schädigungsprozesse wurden mit Hilfe von zerstörungsfreien Prüfmethoden verfolgt. Dabei zeigte sich, dass eine durch äußeren Zwang bedingte Mikrorissbildung durch Schallemissionsanalyse detektiert werden kann. KW - Beton KW - Verformung KW - Rissbildung KW - Zusatzstoffe PY - 2013 SN - 978-3-642-29573-7 DO - https://doi.org/10.1007/978-3-642-29573-7_34 SP - 343 EP - 350 PB - Springer CY - Berlin Heidelberg AN - OPUS4-31758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meng, Birgit A1 - Meschke, Günther T1 - Ausmaß von Vorschädigungen, Transportprozesse in vorgeschädigtem Betongefüge T2 - AKR unter kombinierter Einwirkung CY - Weimar, Deutschland DA - 2014-10-21 PY - 2014 AN - OPUS4-31705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eichhorn, Michael A1 - Kühne, Hans-Carsten A1 - Meng, Birgit T1 - Performance-Verbesserung bei Betonwerksteinen durch multi-funktionelle Nano-Additive T2 - 17. Internatiole Baustofftagung "ibausil" CY - Weimar, Germany DA - 2009-09-23 PY - 2009 AN - OPUS4-19556 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Huismann, Sven A1 - Weise, Frank A1 - Meng, Birgit A1 - Schneider, U. ED - Kodur, V. ED - Franssen, J.-M. T1 - Influence of polypropylene fibres on the thermal strain of high strength concrete at high temperatures T2 - 6th International conference "Structures in fire" CY - East Lansing, Michigan, USA DA - 2010-06-02 KW - High performance concrete KW - High temperatures KW - Polypropylene fibres KW - Thermal strain KW - Acoustic emission KW - Ultrasound PY - 2010 SN - 978-1-60595-027-3 SP - 719 EP - 726 PB - DEStech Publications, Inc. CY - Lancaster, PA, USA AN - OPUS4-21563 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Bürgisser, Philip A1 - Weise, Frank A1 - Meng, Birgit ED - Castro-Borges, P. ED - Moreno, E.I. ED - Sakai, K. ED - Gjorv, O.E. ED - Banthia, N. T1 - The natural pozzolana 'Rhenish trass' and its effect on ASR in concrete T2 - CONSEC’10 - 6th International conference on concrete under severe conditions - Environment and loading CY - Mérida, Yucatán, México DA - 2010-06-07 KW - AKR KW - Beton KW - Natürliche Pozzolane PY - 2010 SN - 978-0-415-59316-8 SP - 313 EP - 320 PB - Taylor & Francis AN - OPUS4-21969 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fontana, Patrick A1 - Lehmann, Christian A1 - Müller, Urs A1 - Meng, Birgit ED - Brameshuber, W. T1 - Reactivity of mineral additions in autoclaved UHPC T2 - International Conference on Material Science and 64th RILEM Annual week CY - Aachen, Germany DA - 2010-09-06 KW - UHPC KW - Autoklavierung KW - Mikrostruktur KW - Festigkeit KW - Phasenzusammensetzung KW - Forschung und Entwicklung PY - 2010 SN - 978-2-35158-110-0 VL - III IS - PRO 77 SP - 69 EP - 77 PB - RILEM Publications AN - OPUS4-21970 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Herbst, Tristan A1 - Hauer, B. A1 - Rübner, Katrin A1 - Meng, Birgit T1 - Einsatzpotentzial und nachhaltige Verwertung von Hausmüllverbrennungsaschen als Gesteinskörnungen im Beton T2 - GDCh-Fachtagung Bauchemie 2009 CY - Freiberg, Deutschland DA - 2009-10-08 KW - Sekundärrohstoffe KW - Müllverbrennungsaschen KW - Sekundäre Gesteinskörnung PY - 2009 SN - 978-3-936028-61-4 VL - 41 SP - 237 EP - 240 AN - OPUS4-22951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -