TY - JOUR A1 - Recknagel, Sebastian A1 - Koch, Matthias A1 - Wise, S. A. A1 - Panne, Ulrich T1 - Fifteenth international symposium on biological and environmental reference materials (BERM-15) N2 - The 15th International Symposium on Biological and Environmental Reference Materials (BERM-15), organized by BAM, took place at in Berlin in September 2018. An overview on main topics of the conference is given. KW - BERM KW - Reference materials PY - 2019 DO - https://doi.org/10.1007/s00769-019-01377-9 SN - 1432-0517 SN - 0949-1775 VL - 24 IS - 3 SP - 249 EP - 250 PB - Springer Verlag AN - OPUS4-48203 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kotthoff, Lisa A1 - Lisec, Jan A1 - Schwerdtle, T. A1 - Koch, Matthias T1 - Prediction of transformation products of monensin by electrochemistry compared to microsomal assay and hydrolysis N2 - The knowledge of transformation pathways and identification of transformation products (TPs) of veterinary drugs is important for animal health, food, and environmental matters. The active agent Monensin (MON) belongs to the ionophore antibiotics and is widely used as a veterinary drug against coccidiosis in broiler farming. However, no electrochemically (EC) generated TPs of MON have been described so far. In this study, the online coupling of EC and mass spectrometry (MS) was used for the generation of oxidative TPs. EC-conditions were optimized with respect to working electrode material, solvent, modifier, and potential polarity. Subsequent LC/HRMS (liquid chromatography/high resolution mass spectrometry) and MS/MS experiments were performed to identify the structures of derived TPs by a suspected target analysis. The obtained EC-results were compared to TPs observed in metabolism tests with microsomes and hydrolysis experiments of MON. Five previously undescribed TPs of MON were identified in our EC/MS based study and one TP, which was already known from literature and found by a microsomal assay, could be confirmed. Two and three further TPs were found as products in microsomal tests and following hydrolysis, respectively. We found decarboxylation, O-demethylation and acid-catalyzed ring-opening reactions to be the major mechanisms of MON transformation. KW - Transformation products KW - Monensin KW - Veterinary drugs KW - Electrochemistry KW - Hydrolysis KW - LC/HRMS PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-485689 DO - https://doi.org/10.3390/molecules24152732 SN - 1420-3049 VL - 24 IS - 15 SP - 2732, 1 EP - 12 PB - MDPI CY - Basel AN - OPUS4-48568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kotthoff, Lisa A1 - Keller, Julia A1 - Lörchner, Dominique A1 - Mekonnen, Tessema F. A1 - Koch, Matthias T1 - Transformation products of organic contaminants and residues - Overview of current simulation methods N2 - The formation of transformation products (TPs) from contaminants and residues is becoming an increasing focus of scientific community. All organic compounds can form different TPs, thus demonstrating the complexity and interdisciplinarity of this topic. The properties of TPs could stand in relation to the unchanged substance or be more harmful and persistent. To get important information about the generated TPs, methods are needed to simulate natural and manmade transformation processes. Current tools are based on metabolism studies, photochemical methods, electrochemical methods, and Fenton's reagent. Finally, most transformation processes are based on redox reactions. This review aims to compare these methods for structurally different compounds. The groups of pesticides, pharmaceuticals, brominated flame retardants, and mycotoxins were selected as important residues/contaminants relating to their worldwide occurrence and impact to health, food, and environmental safety issues. Thus, there is an increasing need for investigation of transformation processes and identification of TPs by fast and reliable methods. KW - Transformation product KW - Electrochemistry KW - Photochemistry KW - Fenton’s reagent PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-474108 DO - https://doi.org/10.3390/molecules24040753 SN - 1420-3049 VL - 24 IS - 4 SP - 753, 1 EP - 23 PB - MDPI CY - Basel AN - OPUS4-47410 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Keller, Julia A1 - Borzekowski, Antje A1 - Koch, Matthias T1 - Mykotoxine in Lebensmitteln - Zearalenon und seine Transformationsprodukte N2 - Mykotoxine in Lebensmitteln stellen weltweit Probleme dar, Zearalenon in Speiseöl ist ein solches. Neue Hydrazinbasierte Analyseverfahren können jetzt helfen, den EU-Grenzwert besser zu kontrollieren. Aber auch die Strukturaufklärung von Transformationsprodukten und verlässliche Kalibrierstandards sind aktuelle Herausforderungen. KW - Analyseverfahren KW - Hydrazin KW - Speiseöle KW - Transformationsprodukte PY - 2019 IS - 03 SP - 34 EP - 36 AN - OPUS4-47858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Borzekowski, Antje A1 - Anggriawan, R. A1 - Auliyati, M. A1 - Kunte, Hans-Jörg A1 - Koch, Matthias A1 - Rohn, S. A1 - Karlovsky, P. A1 - Maul, Ronald T1 - Formation of Zearalenone Metabolites in Tempeh Fermentation N2 - Tempeh is a common food in Indonesia, produced by fungal fermentation of soybeans using Rhizopus sp., as well as Aspergillus oryzae, for inoculation. Analogously, for economic reasons, mixtures of maize and soybeans are used for the production of so-called tempeh-like products. For maize, a contamination with the mycoestrogen zearalenone (ZEN) has been frequently reported. ZEN is a mycotoxin which is known to be metabolized by Rhizopus and Aspergillus species. Consequently, this study focused on the ZEN transformation during tempeh fermentation. Five fungal strains of the genera Rhizopus and Aspergillus, isolated from fresh Indonesian tempeh and authentic Indonesian inocula, were utilized for tempeh manufacturing from a maize/soybean mixture (30:70) at laboratory-scale. Furthermore, comparable tempeh-like products obtained from Indonesian markets were analyzed. Results from the HPLC-MS/MS analyses show that ZEN is intensely transformed into its metabolites alpha-zearalenol (alpha-ZEL), ZEN-14-sulfate, alpha-ZEL-sulfate, ZEN-14-glucoside, and ZEN-16-glucoside in tempeh production. alpha-ZEL, being significantly more toxic than ZEN, was the main metabolite in most of the Rhizopus incubations, while in Aspergillus oryzae fermentations ZEN-14-sulfate was predominantly formed. Additionally, two of the 14 authentic samples were contaminated with ZEN, alpha-ZEL and ZEN-14-sulfate, and in two further samples, ZEN and alpha-ZEL, were determined. Consequently, tempeh fermentation of ZEN-contaminated maize/soybean mixture may lead to toxification of the food item by formation of the reductive ZEN metabolite, alpha-ZEL, under model as well as authentic conditions. KW - Modified mycotoxins KW - Zearalenone sulfate KW - a-zearalenol KW - Food fermentation KW - Rhizopus and Aspergillus oryzae PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-491126 DO - https://doi.org/10.3390/molecules24152697 VL - 24 IS - 15 SP - 2697 PB - MDPI AN - OPUS4-49112 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Temgoua, Ranil C. T. A1 - Lisec, Jan A1 - Koch, Matthias T1 - Breaking down phenylurea herbicides: advanced electrochemical approaches for environmental degradation and remediation N2 - Phenylurea herbicides (PUHs) represent one of the most extensively used herbicide families in agriculture worldwide. While effective for weed control, their environmental persistence, bioaccumulation potential, and formation of toxic metabolites raise significant environmental concerns. This review examines current electrochemical strategies for degrading phenylurea herbicides, with special emphasis on electrochemical oxidation (EC), photoelectrochemical processes (PEC), electro-Fenton (ECF) and photo-electro-Fenton (PECF), with particular attention to the various reactor configurations and their operational mechanisms. A critical innovation of this review lies in its systematic parameter assessment framework, which categorizes nine key operational parameters across all electrochemical degradation methods: electrode material, catalyst type, cell configuration, radiation source, operating conditions (pH, current density, temperature), removal efficiency, mineralization rate, degradation kinetics, identified intermediates, and Energy consumption. For each technique, we highlight which parameters are essential, important, critical, or non� applicable, providing a structured framework to guide future experimental design. Selected case studies are presented to illustrate practical applications and performance outcomes. The review concludes with acritical analysis of current knowledge gaps and future research avenues that could enhance the sustainability, efficiency, and scalability of electrochemical remediation technologies. This work is intended as a comprehensive resource for environmental chemists, analytical scientists, and remediation engineers committed to addressing phenylurea herbicide contamination. KW - Mass Spectrometry KW - Phenylurea herbicides KW - Electrochemistry PY - 2026 DO - https://doi.org/10.1039/D5EW00809C SN - 2053-1400 VL - 12 IS - 1 SP - 72 EP - 92 PB - Royal Society of Chemistry (RSC) AN - OPUS4-64822 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Andrae, K. A1 - Merkel, Stefan A1 - Durmaz, V. A1 - Fackeldey, K. A1 - Köppen, Robert A1 - Weber, M. A1 - Koch, Matthias T1 - Investigation of the ergopeptide epimerization process N2 - Ergopeptides, like ergocornine and a-ergocryptine, exist in an S- and in an R-configuration. Kinetic experiments imply that certain configurations are preferred depending on the solvent. The experimental methods are explained in this article. Furthermore, computational methods are used to understand this configurational preference. Standard quantum chemical methods can predict the favored configurations by using minimum energy calculations on the potential energy landscape. However, the explicit role of the solvent is not revealed by this type of methods. In order to better understand its influence, classical mechanical molecular simulations are applied. It appears from our research that 'folding' the ergopeptide molecules into an intermediate state (between the S- and the R-configuration) is mechanically hindered for the preferred configurations. KW - Ergopeptide KW - Epimerization KW - Hybrid monte carlo KW - Molecular dynamics KW - Conformation KW - Quantum mechanics PY - 2014 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-324632 DO - https://doi.org/10.3390/computation2030102 SN - 2079-3197 VL - 2 IS - 3 SP - 102 EP - 111 PB - MDPI CY - Basel AN - OPUS4-32463 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Junge, Florian A1 - Wittwer, Philipp A1 - Sommerfeld, Thomas A1 - Gehrenkemper, Lennart A1 - Zoister, Christian A1 - Nickl, Philip A1 - Koch, Matthias A1 - Meermann, Björn A1 - Haag, Rainer T1 - Adsorber Charge Dominates over Hydrophobic or Fluorophilic Functionalization in Influencing Adsorption of PFCA onto Polystyrene Resins N2 - A systematic series of industrial-relevant polystyrene-based anion exchange resins that are functionalized with hydro- or fluorocarbon chains are compared regarding their adsorption behavior toward perfluorocarboxylic acids (PFCA) in respect to their charge, chain length, and type of chain. The results clearly show the dominance of electrostatic interactions in the adsorption process as uncharged adsorber materials showed no adsorption at all. In contrast, the charged adsorber materials showed in general a PFCA removal of 80% to 30% over the experiment depending on effluent fraction. Unexpectedly, for perfluorobutanoic acid (PFBA) the highest removal rate is found with consistently >90%. Despite observing significant benefits in the adsorption of PFCA for fluoroalkylated adsorbers in comparison to their non-fluorinated counterparts, this effect of fluoroalkylation is comparatively small and can not be clearly attributed to fluorophilic interactions between the fluoroalkyl chains. These findings help clarifying that the introduction of fluorocarbon moieties in adsorber materials is not necessary in order to remove fluorocarbon molecules from the environment. KW - PFAS KW - Remediation KW - Adsorption KW - Fluorophilic interactions PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601883 DO - https://doi.org/10.1002/admi.202400199 SN - 2196-7350 SP - 1 EP - 10 PB - John Wiley & Sons CY - Hoboken, New Jersey, USA AN - OPUS4-60188 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Merkel, Stefan A1 - Köppen, Robert A1 - Koch, Matthias A1 - Emmerling, Franziska A1 - Nehls, Irene T1 - Ergotaminine N2 - The title compound {systematic name: (6aR,9S)-N-[(2R,5S,10aS,10bS)-5-benzyl-10b-hydroxy-2-methyl-3,6-dioxooctahydro-8H-oxazolo[3,2-a]pyrrolo[2,1-c]pyrazin-2-yl]-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide}, C33H35N5O5, was formed by an epimerization reaction of ergotamine. The non-aromatic ring (ring C of the ergoline skeleton) directly fused to the aromatic rings is nearly planar [maximum deviation = 0.317 (4) Å] and shows an envelope conformation, whereas ring D, involved in an intramolecular N–H···N hydrogen bond exhibits a slightly distorted chair conformation. The structure displays chains running approximately parallel to the diagonal of bc plane that are formed through N–H···O hydrogen bonds. PY - 2012 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-254528 DO - https://doi.org/10.1107/S1600536812003674 SN - 1600-5368 VL - 68 IS - 3 SP - o610-o611, sup1-sup11 PB - Munksgaard CY - Copenhagen AN - OPUS4-25452 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Merkel, Stefan A1 - Köppen, Robert A1 - Koch, Matthias A1 - Emmerling, Franziska A1 - Nehls, Irene T1 - Lysergol monohydrate N2 - In the title compound [systematic name: (7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3,2-fg]quinoline-9-yl)methanol monohydrate], C16H18N2O·H2O, the non-aromatic ring (ring C of the ergoline skeleton) directly fused to the aromatic rings is nearly planar, with a maximum deviation of 0.659 (3) Å, and shows an envelope conformation. In the crystal, hydrogen bonds between the lysergol and water molecules contribute to the formation of layers parallel to (10-2). PY - 2012 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-254015 DO - https://doi.org/10.1107/S1600536812002632 SN - 1600-5368 VL - 68 IS - 2 SP - o523, sup1 EP - sup8 PB - Munksgaard CY - Copenhagen AN - OPUS4-25401 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Resch-Genger, Ute A1 - Meermann, Björn A1 - Koch, Matthias A1 - Weller, Michael G. T1 - Editorial: Analytical methods and applications in materials and life sciences N2 - Current trends in materials and life sciences are flanked by the need to push detection limits to single molecules or single cells, enable the characterization of increasingly complex matrices or sophisticated nanostructures, speed up the time of analysis, reduce instrument complexity and costs, and improve the reliability of data. This requires suitable analytical tools such as spectroscopic, separation and imaging techniques, mass spectrometry, and hyphenated techniques as well as sensors and their adaptation to application-specific challenges in the environmental, food, consumer product, health sector, nanotechnology, and bioanalysis. Increasing concerns about health threatening known or emerging pollutants in drinking water, consumer products, and food and about the safety of nanomaterials led to a new awareness of the importance of analytical sciences. Another important driver in this direction is the increasing demand by legislation, particularly in view of the 17 sustainable development goals by the United Nations addressing clean energy, industry, and innovation, sustainable cities, clean water, and responsible consumption and production. In this respect, also the development of analytical methods that enable the characterization of material flows in production processes and support recycling concepts of precious raw materials becomes more and more relevant. In the future, this will provide the basis for greener production in the chemical industry utilizing recycled or sustainable starting materials. This makes analytical chemistry an essential player in terms of the circular economy helping to increase the sustainability of production processes. In the life sciences sector, products based on proteins, such as therapeutic and diagnostic antibodies, increase in importance. These increasingly biotechnologically produced functional biomolecules pose a high level of complexity of matrix and structural features that can be met only by highly advanced methods for separation, characterization, and detection. In addition, metrological traceability and target definition are still significant challenges for the future, particularly in the life sciences. However, innovative reference materials as required for the health and food sector and the characterization of advanced materials can only be developed when suitable analytical protocols are available. The so-called reproducibility crisis in sciences underlines the importance of improved measures of quality control for all kinds of measurements and material characterization. This calls for thorough method validation concepts, suitable reference materials, and regular interlaboratory comparisons of measurements as well as better training of scientists in analytical sciences. The important contribution of analytical sciences to these developments is highlighted by a broad collection of research papers, trend articles, and critical reviews from these different application fields. Special emphasis is dedicated to often-overlooked quality assurance and reference materials. T2 - 150 years BAM: Science with impact CY - Berlin, Germany DA - 01.01.2021 KW - Analysis KW - Life sciences KW - Analytical sciences KW - Quality assurance KW - Reference material KW - Fluorescence KW - Nanoparticle KW - Sensor KW - Material sciences KW - Pollutant KW - Environment KW - Method KW - Limit of detection KW - 150th anniversary KW - ABC KW - BAM KW - Collection KW - Editorial KW - Special issue KW - Bundesanstalt für Materialforschung und -prüfung KW - Jahrestag PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550720 DO - https://doi.org/10.1007/s00216-022-04082-8 SN - 1618-2642 SN - 1618-2650 VL - 414 IS - Topical collection: Analytical methods and applications in the materials and life sciences SP - 4267 EP - 4268 PB - Springer CY - Berlin AN - OPUS4-55072 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ghiringhelli, Luca M. A1 - Baldauf, Carsten A1 - Bereau, Tristan A1 - Brockhauser, Sandor A1 - Carbogno, Christian A1 - Chamanara, Javad A1 - Cozzini, Stefano A1 - Curtarolo, Stefano A1 - Draxl, Claudia A1 - Dwaraknath, Shyam A1 - Fekete, Ádám A1 - Kermode, James A1 - Koch, Christoph T. A1 - Kühbach, Markus A1 - Ladines, Alvin Noe A1 - Lambrix, Patrick A1 - Himmer, Maja-Olivia A1 - Levchenko, Sergey V. A1 - Oliveira, Micael A1 - Michalchuk, Adam A1 - Miller, Ronald E. A1 - Onat, Berk A1 - Pavone, Pasquale A1 - Pizzi, Giovanni A1 - Regler, Benjamin A1 - Rignanese, Gian-Marco A1 - Schaarschmidt, Jörg A1 - Scheidgen, Markus A1 - Schneidewind, Astrid A1 - Sheveleva, Tatyana A1 - Su, Chuanxun A1 - Usvyat, Denis A1 - Valsson, Omar A1 - Wöll, Christof A1 - Scheffler, Matthias T1 - Shared metadata for data-centric materials science N2 - The expansive production of data in materials science, their widespread sharing and repurposing requires educated support and stewardship. In order to ensure that this need helps rather than hinders scientific work, the implementation of the FAIR-data principles (Findable, Accessible, Interoperable, and Reusable) must not be too narrow. Besides, the wider materials-science community ought to agree on the strategies to tackle the challenges that are specific to its data, both from computations and experiments. In this paper, we present the result of the discussions held at the workshop on “Shared Metadata and Data Formats for Big-Data Driven Materials Science”. We start from an operative definition of metadata, and the features that a FAIR-compliant metadata schema should have. We will mainly focus on computational materials-science data and propose a constructive approach for the FAIRification of the (meta)data related to ground-state and excited-states calculations, potential-energy sampling, and generalized workflows. Finally, challenges with the FAIRification of experimental (meta)data and materials-science ontologies are presented together with an outlook of how to meet them. KW - Library and Information Sciences KW - Statistics, Probability and Uncertainty KW - Computer Science Applications KW - Education KW - Information Systems KW - Statistics and Probability PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-584846 DO - https://doi.org/10.1038/s41597-023-02501-8 VL - 10 IS - 1 SP - 1 EP - 18 PB - Springer Science and Business Media LLC AN - OPUS4-58484 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Drzymala, Sarah A1 - Kraus, Werner A1 - Emmerling, Franziska A1 - Koch, Matthias T1 - (3S)-14,16-Dihydroxy-3-methyl-3,4,5,6,9,10,11,12-octa-hydro-1H-2-benzoxacyclotetradecine-1,7(8H)-dione (zearalanone) monohydrate N2 - The absolute configuration of the title compound, C18H24O5·H2O, was not been determined by anomalous-dispersion effects, but has been assigned by reference to an unchanging chiral centre in the synthetic procedure. Intramolecular O—H···O hydrogen bonds stabilize the molecular conformation. In the crystal, O—H···O hydrogen bonds link the main molecules and the water molecules, forming an infinite three-dimensional network. KW - Zearalanone KW - Crystal structure PY - 2012 DO - https://doi.org/10.1107/S1600536812018168 SN - 1600-5368 VL - 68 IS - 5 SP - o1577, sup1 EP - sup7 PB - Munksgaard CY - Copenhagen AN - OPUS4-25832 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Emmerling, Franziska A1 - Koch, Matthias T1 - rac-1-(2-aminocarbonyl-2-bromoethyl)-pyridinium bromide N2 - In the crystal structure of the title compound, C8H10BrN2O+·-Br–, intermolecular N—H···Br hydrogen bonds link the molecules into infinite chains along [001]. The inclined angle between the pyridine ring plane and the plane defined by the acid amide group is 63.97 (4)°. PY - 2012 DO - https://doi.org/10.1107/S1600536812019721 SN - 1600-5368 VL - 68 IS - 6 SP - o1666, sup1 EP - sup5 PB - Munksgaard CY - Copenhagen AN - OPUS4-25894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kittler, Katrin A1 - Schreiner, M. A1 - Krumbein, A. A1 - Manzei, S. A1 - Koch, Matthias A1 - Rohn, S. A1 - Maul, Ronald T1 - Uptake of the cyanobacterial toxin cylindrospermopsin in brassica vegetables N2 - Toxin-producing cyanobacterial species are increasingly being found in freshwater systems. However, literature on the impact of many cyanobacterial toxins on plants is scarce. Cylindrospermosin (CYN), a secondary metabolite of cyanobacteria such as Cylindrospermopsis and Aphanizomenon species, is a potent hepatotoxin and protein synthesis inhibitor. Worryingly, CYN is increasingly found in surface and drinking water worldwide causing human and animal intoxications. Further, exposure of crop plants to CYN by irrigation with contaminated water has already been shown. Therefore, in this study, horticulturally important and highly consumed Brassica species were investigated to determine the level of CYN in the leaves after exposure of the roots to the toxin. Treatment of Brassica oleracea var. sabellica, Brassica juncea, and Sinapis alba under varying experimental conditions showed significant CYN uptake, with CYN levels ranging from 10% to 21% in the leaves compared to the CYN concentration applied to the roots (18–35 µg/l). In seedlings, CYN concentrations of up to 49 µg/g fresh weight were observed. Thus, crop plants irrigated with CYN-containing water may represent a significant source of this toxin within the food chain. KW - Cylindrospermopsin KW - Plant systemic availability KW - Cyanobacterial toxin KW - Brassicaceae KW - Exposure source PY - 2012 DO - https://doi.org/10.1016/j.foodchem.2012.01.107 SN - 0308-8146 VL - 133 IS - 3 SP - 875 EP - 879 PB - Elsevier CY - Amsterdam [u.a.] ; Jena AN - OPUS4-25730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siegel, David A1 - Koch, Matthias A1 - Emmerling, Franziska A1 - Nehls, Irene T1 - Deacetyl tenuazonic acid KW - Deacetyl tenuazonic acid KW - X-ray single crystal diffraction KW - Crystal structure PY - 2009 DO - https://doi.org/10.1107/S1600536809015372 SN - 1600-5368 VL - 65 IS - 6 SP - o1201 PB - Munksgaard CY - Copenhagen AN - OPUS4-19429 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Köppen, Robert A1 - Emmerling, Franziska A1 - Koch, Matthias T1 - rac-2,3-Dibromopropionamide N2 - The racemic title compound, C3H5Br2NO, was crystallized from methanol. In the crystal, adjacent molecules are linked through N–H···O hydrogen bonds, forming chains along the c-axis direction. These chains are linked through N–H···O hydrogen bonds, forming an undulating two-dimensional network lying parallel to the bc plane. There are also short Br···Br contacts present [3.514 (3) Å]. PY - 2013 DO - https://doi.org/10.1107/S160053681205132X SN - 1600-5368 VL - 69 IS - Part 2 SP - o151, sup-1 EP - sup-5 PB - Munksgaard CY - Copenhagen AN - OPUS4-27574 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Merkel, Stefan A1 - Köppen, Robert A1 - Koch, Matthias A1 - Emmerling, Franziska A1 - Nehls, Irene T1 - Ergometrinine N2 - The absolute configuration of ergometrinine, C19H23N3O2 {systematic name: (6aR,9S)-N-[(S)-1-hydroxypropan-2-yl]-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide}, was established based on epimerization reaction of ergometrine, which was followed by preparative HPLC. The non-aromatic ring (ring C of the ergoline skeleton) directly fused to the aromatic rings is nearly planar [maximum deviation = 0.271 (3) Å] and shows an envelope conformation, whereas ring D, involved in an intramolecular N-HN hydrogen bond, exibits a slightly distorted chair conformation. The structure displays undulating layers in the ac plane formed by O-H...O and N-H...O hydrogen bonds. KW - Ergometrinine KW - Ergometrine KW - Ergot alkaloids KW - Indole alkaloids KW - Crystal structure KW - Epimerization PY - 2010 DO - https://doi.org/10.1107/S1600536810030825 SN - 1600-5368 VL - 66 IS - 9 SP - o2275, sup-1 - sup-9 PB - Munksgaard CY - Copenhagen AN - OPUS4-21806 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Siegel, David A1 - Blaske, Franziska A1 - Koch, Matthias A1 - Emmerling, Franziska A1 - Nehls, Irene T1 - Deacetyl tenuazonic acid p-toluenesulfonylhydrazone KW - Deacetyl tenuazonic acid KW - Toluenesulfonylhydrazine KW - Hydrazone KW - Crystal structure PY - 2009 DO - https://doi.org/10.1107/S1600536809048958 SN - 1600-5368 VL - E65 IS - 12 SP - o3136 Sup-1 - o3136 Sup-8 PB - Munksgaard CY - Copenhagen AN - OPUS4-20608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Drzymala, Sarah A1 - Kraus, Werner A1 - Emmerling, Franziska A1 - Koch, Matthias T1 - (3S,7R)-7,14,16-trihydroxy-3-methyl-3,4,5,6,7,8,9,10,11,12-decahydro-1H-2-benzoxacyclotetradecin-1-one N2 - The asymmetric unit of the title compound, C18H26O5, which is known as α-zearalanol, contains two molecules having the same conformation, with a r.m.s. deviation of less than 0.03 Å for all non-H atoms. In each independent molecule, an intramolecular O—H···O hydrogen bond stabilizes the molecular conformation. In the crystal, O—H···O hydrogen bonds link the molecules, forming infinite chains along [110] and [1¯10]. KW - Alpha-zearalanol KW - Zearalenon KW - Estrogen KW - Growth promoter KW - Ralgro PY - 2012 DO - https://doi.org/10.1107/S1600536812041141 SN - 1600-5368 VL - 68 IS - 11 SP - o3071, sup-1 - sup-11 PB - Munksgaard CY - Copenhagen AN - OPUS4-26771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scholl, Juliane A1 - Scharpmann, Philippa A1 - Bagheri, Abbas A1 - Lisec, Jan A1 - Meiers, Emelie A1 - Jaeger, Carsten A1 - Leonhardt, Robert A1 - Haase, Hajo A1 - Koch, Matthias T1 - Beyond the lab: Real-world composition of commercial Li-ion battery electrolytes N2 - This study presents a systematic, characterization of electrolytes from commercial lithium-ion batteries (LIB), encompassing 90 batteries from leading global manufacturers across diverse formats and application sectors. An integrated, complementary mass spectrometric workflow combining LC–MS/MS, GC–MS, and high-resolution MS was employed. To ensure robust structural annotation, molecular identifications were assigned confidence levels following Schymanski et al. (2014). Across all formats, PF6− was confirmed as the dominant Li+ counterion, frequently coexisting with BF4−, PO2F2−, and bis(fluorosulfonyl)imide (FSI−), forming binary and ternary salt systems optimized for both conductivity and safety. Solvent systems revealed the widespread use of propylene carbonate (PC) combined with diverse carbonate mixtures, demonstrating trends in performance optimization specific to cell format. A variety of additives were identified, reflecting a clear shift towards multifunctional, synergistic additive packages and the gradual replacement of fluorinated species with environmentally safer alternatives. Cycling studies demonstrated that electrolyte degradation mechanisms are strongly influenced by electrode composition and additive chemistry, with oxidative degradation pathways dominating. Together, these findings provide rare empirical insight into the evolving formulation strategies of electrolytes in commercial LIB, still employing classic carbonates and LiPF6, but highlighting a trend toward safer, more robust, and sustainable electrolyte architectures by using synergistic multifunctional systems. KW - Mass Spectrometry KW - Lithium-ion batteries KW - Electrolyte degradation PY - 2026 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-656254 DO - https://doi.org/10.1016/j.jpowsour.2026.239739 SN - 0378-7753 VL - 673 SP - 1 EP - 13 PB - Elsevier B.V. AN - OPUS4-65625 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -