TY - CONF A1 - Reinsch, Martin T1 - Bestimmung von Ochratoxin A in Lebensmitteln mittels HPLC/MS T2 - Doktorandenseminar BAM / HUB CY - Berlin, Germany DA - 2003-02-01 PY - 2003 AN - OPUS4-3734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Pauli, Jutta A1 - Jäger, Christian A1 - Scholz, G. ED - Krämer, V. T1 - Phasentransformationen von anorganisch modifizierten Alumo-Xerogelen T2 - Jahrestagung der Gesellschaft für Thermische Analyse e.V. CY - Augsburg, Deutschland DA - 2003-09-15 PY - 2003 SP - 1 EP - 2 AN - OPUS4-2668 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas A1 - Töpfer, Antje A1 - Nehls, Irene T1 - Bestimmung von Ochratoxin A in Wein nach Reinigung an Anionenaustausch/Reversed Phase-Material mittels LC-MS/MS T2 - 33. Deutscher Lebensmittelchemikertag CY - Bonn, Germany DA - 2004-09-13 PY - 2004 AN - OPUS4-5474 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas A1 - Töpfer, Antje A1 - Nehls, Irene T1 - Vergleich von Extraktionstechniken zur Bestimmung von Ochratoxin A in Röstkaffee T2 - "Tag der Chemie", Universität Potsdam, Institut für Chemie CY - Potsdam, Germany DA - 2004-07-07 PY - 2004 AN - OPUS4-5476 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wondraczek, L. A1 - Reinsch, Stefan A1 - Gaber, Martin A1 - Deubener, J. A1 - Müller, Ralf A1 - Komatsu, T. T1 - Nano-crystalline germanate glass-ceramics T2 - 78. Glastechnische Tagung CY - Nürnberg, Deutschland DA - 2004-06-07 PY - 2004 SP - 37 EP - 40 PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-6953 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nofz, Marianne A1 - Sojref, Regine A1 - Dreßler, Martin A1 - Dörfel, Ilona A1 - Reinsch, Stefan A1 - Saliwan Neumann, Romeo T1 - Korundhaltige Aluminiumoxidschichten T2 - 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 2005-04-06 PY - 2005 UR - http://www.dgm.de/download/tg/706/706_85.pdf SP - 5 Seiten PB - DGM CY - Kassel AN - OPUS4-7522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reinsch, Martin A1 - Töpfer, Antje A1 - Lehmann, Andreas A1 - Nehls, Irene T1 - Determination of ochratoxin A in wine by liquid chromatography tandem mass spectrometry after combined anion-exchange/reversed-phase clean-up N2 - Ochratoxin A (OTA) is a mycotoxin produced by Aspergillus ochraceus and Penicillium verrucosum. It has been found and analysed in several foods and feeds. Owing to its toxicity and occurrence in food and feed, the European Community has issued directives and some countries have their own regulations for OTA contents in food, feed and beverages. This work describes a method for the determination of OTA in mulled and red wine. It is based on combined anion exchange/reversed-phase clean-up and was analysed by liquid chromatography coupled with tandem mass spectrometry (multiple reaction monitoring). The method was validated with natural contaminated and spiked wine samples with OTA contents from 1.34 to 3.48 g kg–1. Owing to its accuracy, good reproducibility and repeatability, this easy method is a good alternative to liquid chromatography–fluorescence detection methods. KW - Ochratoxin A KW - Wine KW - Tandem mass spectrometry KW - Solid-phase extraction KW - Anion exchange KW - Liquid chromatography PY - 2005 DO - https://doi.org/10.1007/s00216-005-3097-4 SN - 1618-2642 SN - 1618-2650 VL - 381 IS - 8 SP - 1592 EP - 1595 PB - Springer CY - Berlin AN - OPUS4-10306 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Malz, Frank A1 - Pauli, Jutta A1 - Jäger, Christian A1 - Reinsch, Stefan A1 - Scholz, G. T1 - Aluminum speciation and thermal evolution of aluminas resulting from modified Yoldas sols N2 - Aluminas resulting from sols prepared via a modified Yoldas procedure were studied with differential thermal analysis (DTA), differential thermal gravimetrie (DTG), 27Al nuclear magnetic resonance (27Al MAS NMR) and X-ray diffraction (XRD) concerning their thermal properties, aluminum speciation and phase content. Hydrolysis of aluminum-sec-butoxide in aluminum nitrate solutions allowed to prepare stable sols with varying NO3-/Al molar ratios, solids contents and pH values. Resulting sols contained different aluminum species including also Al13 polycations. Sol preparation conditions also determined aluminum speciation in solid products obtained after thermal treatments of gels obtained from these sols. Al13 polycations and AlO5 species were found to play an important role for thermally induced transformation from amorphous products via eta-Al2O3 to alpha-Al2O3. Intermediately formed eta-Al2O3 promotes the phase transformation to alpha-Al2O3. KW - Alumina KW - Modified Yoldas sols KW - 27Al nuclear magnetic resonance KW - Differential thermal analysis KW - X-ray diffraction PY - 2007 DO - https://doi.org/10.1016/j.jssc.2007.06.018 SN - 0022-4596 SN - 1095-726X VL - 180 IS - 9 SP - 2409 EP - 2419 PB - Elsevier CY - San Diego, Calif. AN - OPUS4-16189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reinsch, Stefan A1 - Gaber, Martin A1 - Müller, Ralf A1 - Schiller, Wolfgang Arno T1 - Rate controlled debindering of glass ceramic composites N2 - Green compacts of ceramics, glass ceramic composites and sinter glass ceramics contain different amounts of organic materials added as pressing aids or binders. Before sintering, these organics have to burn out completely. In oxidising atmospheres, the debindering process is mostly exothermic and therefore difficult to control. This uncontrolled heat production due to locally enhanced debindering and respective gas release may cause damages in the green compact microstructure. Therefore, debindering is usually operated with very low heating rates (< 3 K/min) which requires long processing times of many hours. In this paper, we will show that it is possible to reduce the processing time for debindering dramatically by using the decomposition rate of the organic binder, detected by the weight loss of the sample, as a control factor of the furnace. T2 - 9th ESG (European Society of Glass) Conference with the Annual Meeting of the ICG Glass - "The challenge for the 21st century" CY - Trencin, Slovakia DA - 2008-06-22 KW - Debindering KW - Thermo gravimetry KW - Glass ceramic composites PY - 2005 SN - 1022-6680 SN - 1662-8985 VL - 39-40 SP - 583 EP - 586 PB - Trans Tech Publ. CY - Zurich AN - OPUS4-17840 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas T1 - Untersuchung zur Herstellung Ochratoxin A belasteter Referenzmaterialien T2 - InCom CY - Düsseldorf, Germany DA - 2003-03-25 PY - 2003 AN - OPUS4-5857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas A1 - Töpfer, Antje A1 - Nehls, Irene T1 - Bestimmung von Ochratoxin A in Wein mittels LC-MS/MS nach kombiniertem Anionenaustauscher/Resersed Phase clean up T2 - ANAKON 2005 CY - Regensburg, Germany DA - 2003-03-15 PY - 2003 AN - OPUS4-5872 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas A1 - Töpfer, Antje A1 - Nehls, Irene T1 - Bestimmung von Ochratoxin A in Wein mittels LC-MS/MS nach kombiniertem Anionenaustauscher/Reversed Phase clean up T2 - ANAKON 2005 CY - Regensburg, Germany DA - 2005-03-15 PY - 2005 AN - OPUS4-11716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Reinsch, Stefan A1 - Schadrack, Reinhard A1 - Benemann, Sigrid T1 - Burnout behavior of ceramic coated open cell polyurethane (PU) sponges N2 - Open cell rigid foams made from polyurethane (PU) are frequently used in ceramic processing for preparation of porous ceramics by the so-called replica technique. This work presents data regarding the PU burnout, shrinkage characteristics as well as the morphology of the ceramic coated PU sponges during heating up. Shrinkage of the ceramic coated PU sponges closely follows the mass loss due to PU decomposition. Two temperatures (i) 267 °C and (ii) 380 °C were identified at which PU decomposition reaches local maxima. Shrinkage measurements on ceramic coated PU sponges reveal that both PU decomposition stages lead to similar extends of shrinkage in the ceramic coated PU sponge. Differential thermal analysis (DTA) showed that the two decomposition related temperatures (267 and 380 °C) differ concerning the energy release. While the low-temperature signal is endothermic, an exothermic signal was detected at 380 °C. The morphology of the ceramic coated PU sponges was investigated with scanning electron microscopy (SEM) which gave insight into the formation of hollow ceramic struts-a well known feature of ceramics being prepared by the replica technique. KW - Polyurethane (PU) KW - Porous ceramics KW - Mass spectrometry KW - Thermal analysis PY - 2009 DO - https://doi.org/10.1016/j.jeurceramsoc.2009.07.025 SN - 0955-2219 SN - 1873-619X VL - 29 IS - 16 SP - 3333 EP - 3339 PB - Elsevier CY - Oxford AN - OPUS4-20092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Klobes, Peter A1 - Dörfel, Ilona A1 - Reinsch, Stefan T1 - Differences between films and monoliths of sol-gel derived aluminas N2 - This work compares thin layers (films) and monoliths prepared from alumina sols with respect to their microstructure, thermal evolution, porosity and specific surface area. After heat treatment at similar temperatures, films and monoliths showed the same qualitative changes in porosity and specific surface area. However, some marked quantitative differences were detected. Film fragments had a lower open porosity, a lower specific surface area and a narrower pore size distribution. Furthermore, the thermal evolution showed a markedly different burnout of organic components between films and monoliths. The observed differences between films and monolith can be explained by the ageing history of the sols during sample preparation. KW - Sol-gel processing KW - Alumina KW - Phase transitions KW - Porosity PY - 2010 DO - https://doi.org/10.1016/j.tsf.2010.07.057 SN - 0040-6090 VL - 519 IS - 1 SP - 42 EP - 51 PB - Elsevier CY - Amsterdam AN - OPUS4-22606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -