TY - CONF A1 - Schmidt, Martin T1 - Holzkohlen im Seeverkehr - Selbstentzündung vermeiden, sichere Beförderungsbedingungen schaffen N2 - Mit der Abkehr von der Nutzung fossiler Rohstoffe rücken regenerative Energieträger immer weiter in den Focus. Neben klassischen Holz- und Pflanzenkohlen werden verstärkt so genannte Biokohlen produziert. Dieser Begriff findet Verwendung für mit Hilfe verschiedener Verfahren karbonisierte pflanzliche, tierische oder mikrobielle Ausgangsstoffe. Diese Kohlen werden zum Teil über weite Strecken zum Bestimmungsort transportiert (Überseetransporte) oder vor Verwendung für längere Zeit gelagert. Häufig zeigen diese Kohlen ein kritisches Selbstentzündungsverhalten, wobei Einstufungstests (UN N.4 Test) versagen können. Ein negatives Testergebnis des UN N.4 Tests führte dabei in der Vergangenheit zur Nichteinstufung als selbsterhitzungsfähiger Stoff; in der Praxis entzündeten sich aber bereits vergleichsweise kleine Schüttungen (einige m³), z. B. beim Seetransport in Containern. Ergebnisse eines Projektes zur systematischen Untersuchung verschiedener Pflanzenkohlen werden vorgestellt. T2 - Internationale Gefahrgut-Tage CY - Hamburg, Germany DA - 26.02.2024 KW - Holzkohlen KW - Pflanzenkohlen KW - Selbstentzündung KW - Gefahrguteinstufung KW - Schiffsbrände PY - 2024 AN - OPUS4-59599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin T1 - Modular production involving benchtop NMR - Current Application Examples Driven by Digitalization N2 - The demand for increasing product diversity in the chemical and pharmaceutical industry calls for new production processes that enable greater flexibility. Therefore, plants are needed which can be adapted to new processes in a fast manner and be scaled up and down easily to volatile market demands. Modular production techniques in combination with advanced process analytical technology (PAT) are considered as a promising solution able to fulfil these requirements. The success and acceptance of modular concepts in both new and existing plants is dependent of its reliability, easy applicability, and standardization. In recent past, enormous efforts were made to overcome existing barriers in a superordinate level, e.g. DEXPI, ENPRO, or MTP naming just a few. Here, we’d like to present a few, more hands-on, application examples which are shown in Figure 1 aiming to increase process flexibility and applicability. T2 - ProcessNET Jahrestagung 2022 Aachen CY - Aachen, Germany DA - 12.09.2022 KW - Process analytical technology KW - NMR spectroscopy KW - Digitization KW - Additive manufacturing PY - 2022 AN - OPUS4-55975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin T1 - Modular production involving benchtop NMR Current Application Examples Driven by Digitalization N2 - The demand for increasing product diversity in the chemical and pharmaceutical industry calls for new production processes that enable greater flexibility. Therefore, plants are needed which can be adapted to new processes in a fast manner and be scaled up and down easily to volatile market demands. Modular production techniques in combination with advanced process analytical technology (PAT) are considered as a promising solution able to fulfil these requirements. The success and acceptance of modular concepts in both new and existing plants is dependent of its reliability, easy applicability, and standardization. In recent past, enormous efforts were made to overcome existing barriers in a superordinate level, e.g. DEXPI, ENPRO, or MTP naming just a few. Here, we’d like to present a few, more hands-on, application examples which are shown in Figure 1 aiming to increase process flexibility and applicability. T2 - Achema 2022 CY - Frankfurt a.M., Germany DA - 22.08.2022 KW - Process analytical technology KW - NMR spectroscopy KW - Digitization PY - 2022 AN - OPUS4-55974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin A1 - Kromm, Arne A1 - Kannengießer, Thomas T1 - Eigenspannungsabbau mittels LTT – Schweißzusätzen unter Berücksichtigung der Nahtgeometrie N2 - Low Transformation Temperature (LTT)-Schweißzusätze sind ein innovativer Ansatz, um Eigenspannungen in Schweißnähten zu reduzieren. Dieser Vortrag behandelt neben den Einfluss der LTT-Schweißzusätze auch deren Naht-Ausführungen. Die unterschiedlichen LTT-Nahtgeometrien haben einen signifikanten Einfluss auf den Eigenspannungsabbau in der Schweißnaht und der Wärmeeinflusszone (WEZ). T2 - SFB 1120 Summer School CY - Steinfeld, Germany DA - 11.06.2024 KW - LTT (Low Transformation Temperature) KW - Eigenspannungen KW - Ermüdungsfestigkeit KW - Aufmischung PY - 2024 AN - OPUS4-60306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin T1 - Modular production involving benchtop NMR Current Application Examples Driven by Digitalization N2 - The demand for increasing product diversity in the chemical and pharmaceutical industry calls for new production processes that enable greater flexibility. Therefore, plants are needed which can be adapted to new processes in a fast manner and be scaled up and down easily to volatile market demands. Modular production techniques in combination with advanced process analytical technology (PAT) are considered as a promising solution able to fulfil these requirements. The success and acceptance of modular concepts in both new and existing plants is dependent of its reliability, easy applicability, and standardization. In recent past, enormous efforts were made to overcome existing barriers in a superordinate level, e.g. DEXPI, ENPRO, or MTP naming just a few. Here, we’d like to present a few, more hands-on, application examples which are shown in Figure 1 aiming to increase process flexibility and applicability. T2 - AK Prozessanalytik Jahrestagung 2022 CY - Amersfoort, The Netherlands DA - 19.09.2022 KW - Process analytical technology KW - NMR spectroscopy KW - Digitization KW - Additive manufacturing PY - 2022 AN - OPUS4-55976 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Habib, Abdel Karim T1 - Consequences of exposing cryogenic storage vessels containing liquid hydrogen to a fire load N2 - Within a research cooperation between BAM and Gexcon as part of the SH2IFT program, large scale experiments have been performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) to determine the hazards emerging from a vacuum insulated cryogenic storage vessel containing liquified hydrogen (LH2) is caught in a fire engulfing it. T2 - ELVHYS, 2nd Safety Workshop CY - Online meeting DA - 29.11.2023 KW - BLEVE KW - Cryoegenic storage vessel KW - Liquified hydrogen PY - 2023 AN - OPUS4-59021 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin T1 - Verbesserung der Ermüdungsfestigkeit von Längssteifen durch Low Transformation Temperature (LTT) Schweißzusätze N2 - In diesem Beitrag wird die gezielte Applikation zusätzlicher LTT-Schweißraupen zur Erhöhung der Ermüdungsfestigkeit in Schweißverbindungen erläutert. Der Einfluss der Eigenspannungen auf die Ermüdungsfestigkeit kann besonders durch Längssteifen verdeutlicht werden, da diese durch Verzugsbehinderungen oftmals hohe Eigenspannungen in der ermüdungskritischen Wärmeeinflusszone (WEZ) aufweisen. Daher wurden konventionell einlagig geschweißte Längssteifen aus hochfestem Baustahl mit LTT-Zusatzlagen an den Stirnseiten versehen, um lokal Druckeigenspannungen zu erzeugen, welche durch Schweißparametervariationen geometrisch variierten. Zusätzlich wurde als Kontrolle auch der Fall der zweilagig konventionell geschweißten Längssteife betrachtet. Die mittels XRD bestimmten Schweißeigenspannungen konnten in der WEZ durch die zusätzliche LTT-Naht reduziert werden. Je weiter weg die Nahtspitze der Zusatzlage ist, umso geringer sind die Schweißeigenspannungen in der WEZ. Bei konstanter Amplitudenlast und einem R-Verhältnis von 0,1 konnte die Ermüdungsfestigkeit der LTT-Proben deutlich verbessert werden. Die Ermüdungsfestigkeit bei 2 Millionen Lastwechsel beträgt für konventionelle Proben 87 MPa und für die LTT-Proben 156 bis 196 MPa. Auch eine Steigung der Zeitfestigkeitsgeraden konnte an den LTT-Proben beobachtet werden. Der Umfang dieser Steigerung war ähnlich bzw. höher als bei höherfrequenten gehämmerten Proben. Ein Zusammenhang zwischen der bestimmten Eigenspannung und der Ermüdungsfestigkeit konnte beobachtet werden, wenn auch nur im geringeren Umfang. LTT-Schweißzusätze können verwendet werden, um die Ermüdungsfestigkeit in Längssteifen zu erhöhen. T2 - 15. Vollversammlung des SFB 1120: Summer School 2025 CY - Kall, Germany DA - 08.07.2025 KW - Low transformation temperature (LTT) KW - Eigenspannungen KW - Ermüdungsfestigkeit KW - Längssteife PY - 2025 AN - OPUS4-63710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin T1 - Cryogenic LH2 storage vessels in a fire N2 - To investigate the hazards emanating from cryogenic LH2 storage Vessels in a fire, experiments have been performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) in Horstwalde, Germany. Three double-walled vacuum insulated vessels of 1 m3 volume, filled to approximately 35-40 Vol.% with LH2 were put in a fire. The cylindrical Vessels differed in orientation (horizontal or vertical) and the insulation material used (perlite or multi-layer insulation (MLI)). The fire load was provided by a propane fed burner-system positioned under the storage vessel and designed to give a homogeneous fire load. During the tests the conditions in the vessel (temperatures and pressure) as well as external effects (heat radiation, blast waves, flame ball development and fragmentation) were measured. The tests showed that the k-type thermocouples used are not suitable for measuring very low temperatures as for example the temperature of the hydrogen liquid phase when using the standard tabled values and conversion functions. An assessment of the measured temperatures could only be done by an own “recalibration” of the thermocouples for the very low temperature range. Bolometers were used to measure the heat radiation generated by a possible fireball/BLEVE. To measure blast generated by the vessel burst/BLEVEs blast pencils were positioned at up to three locations. Further several cameras were used to monitor the events: normal cameras, infrared (IR)-cameras, high-speed cameras also on board of a drone. Two of these vessels, a horizontal and a vertical vessel both insulated with perlite withstood the fire loading for 1 hour 20 minutes and 4 hours respectively without catastrophic failure, but partly showing leakages. The horizontal vessel insulated with MLI failed by bursting after 1 hour and 6 minutes resulting in a fireball, fragments, and blast wave. The test results as well as the detailed examination of the non destroyed vessels rose some interesting questions which type of insulation is better to protect a vessel not only during its normal operation but also under fire loading against a heat flux from the surroundings, as well as to the suitability of cryogenic (safety) equipment under fire loading. T2 - 18th EFCE International Symposium on Loss Prevention and Safety Promotion in the Process Industries CY - Bologna, Italy DA - 08.06.2025 KW - BLEVE KW - LH2 KW - Consequences KW - Cryogenic storage KW - Fire engulfment PY - 2025 AN - OPUS4-63700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - ChatGPT and EPICS: LLM-Enhanced Control Systems for Synchrotron Beamlines N2 - The document highlights ChatGPT-EPICS integration for synchrotron beamline automation, employing tools like motor records, PV naming systems, and LLM inference. It evaluates efficiency and challenges in implementing automated motor optimization and handling EPICS controls. T2 - BESSY science seminar CY - Online meeting DA - 22.11.2024 KW - Chatgpt KW - EPICS KW - BAMline PY - 2024 AN - OPUS4-61896 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - From Egypt to Hiddensee – Analysis of Gold with Synchrotron Radiation V N2 - Gold is one of the seven metals already known in antiquity and was used from time immemorial as a medium of exchange and for the production of jewelry because of its luster and rarity. In addition, it is easy to work and largely resistant to chemical influences. Investigations of gold using synchrotron radiation excited X-ray fluorescence analysis are non-destructive and provide information about the chemical elements present in the sample under investigation. The investigations presented here at BAMline focus on questions such as the origin, manufacturing process, and association of gold findings. The different questions are explained by a number of examples ranging from the Viking treasure from Hiddensee to the Nebra Sky Disk and finds from Egypt. The find from Bernstorf is discussed in detail. A Bayesian treatment of the authenticity is shown. T2 - Ringvorlesung Einführung in die Archäometrie CY - Berlin, Germany DA - 01.11.2024 KW - Gold KW - Synchrotron KW - XRF KW - BAMline KW - Bayes PY - 2024 AN - OPUS4-61699 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Decoding the Elemental Fingerprints of Ancient Gold: A Synchrotron-based Approach N2 - This contribution focuses on the application of synchrotron radiation X-ray fluorescence (SR XRF) for the analysis of ancient gold objects at the BAMline, showcasing several noteworthy examples. One prominent artifact is the Sky Disc of Nebra, which presented a relatively straightforward question to be addressed: Do the gold inlays belong together, and can we glean insights about their origin? In contrast, the analysis of the Bernstorf gold, an alleged Bronze Age treasure composed of exceptionally pure gold, posed a more intricate challenge. The debate surrounding its authenticity prompted an in-depth investigation utilizing SR XRF with different experimental conditions. This approach, involving the analysis of trace elements, played a pivotal role in elucidating the nature and age of the gold, offering valuable insights into its production Platinum emerges as a crucial trace element for gold analysis, given its typically low concentration in gold artifacts, often in the range of a few parts per million (ppm). Accurately measuring Platinum in the presence of overlapping emission lines from gold is arduous. To overcome this challenge, BAMline developed a wavelength dispersive set-up known as D2XRF, employing a pixelated energy-dispersive X-ray detector (pnCCD). This innovative approach enables the resolution of overlapping emission lines, leading to a remarkable detection limit of 1 ppm for Platinum in gold samples. Furthermore, the application of the pnCCD for imaging element distributions on a Phoenician ivory artifact will be showcased. This technique allows for the visualization and mapping of various elements, which opens the possibility to reconstruct the original appearance. The comprehensive analysis of ancient gold artifacts at BAMline has provided valuable insights into the craftsmanship, trade, and technological advancements of ancient civilizations. By unraveling the complex stories these artifacts carry, our studies contributed significantly to the fields of archaeology, history, and materials science. It underscores the importance of interdisciplinary approaches in piecing together the puzzle of human history, revealing the interconnectedness of cultures through the lens of non-destructive analysis. T2 - Denver X-ray Conference 2024 CY - Denver, CO, USA DA - 04.08.2024 KW - Gold KW - Synchrotron KW - XRF KW - BAMline PY - 2024 AN - OPUS4-61701 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Vergangenheit verifiziert: Datierung und Authentizität mittels Bayes’scher Methoden N2 - In der Archäologie ist die präzise Datierung von Funden und die Verifikation ihrer Authentizität von entscheidender Bedeutung, um Erkenntnisse über vergangene Zivilisationen zu gewinnen. Während traditionelle Methoden wie die Radiokarbon-Datierung bereits seit Jahrzehnten etabliert sind, hat die Anwendung der Bayes’schen Statistik in den letzten Jahren an Bedeutung gewonnen. Dieser Ansatz erlaubt es, vorhandene Unsicherheiten in archäologischen Daten systematisch zu berücksichtigen und bietet somit eine leistungsfähige Ergänzung zu herkömmlichen Methoden. Die Bayes’sche Theorie basiert auf der Aktualisierung von Wahrscheinlichkeiten anhand neuer Daten. Dies ist besonders nützlich in der Archäologie, wo neue Funde oft bestehende Theorien und Annahmen in Frage stellen. Durch die Kombination von Prior-Wissen mit neuen Daten ermöglicht die Bayes'sche Methode eine adaptive und flexible Datierung und Verifizierung. Ein Beispiel für die Anwendung dieser Methode ist die Radiokarbon-Datierung. Während die traditionelle Radiokarbon-Datierung einen geschätzten Zeitraum bietet, kann die Bayes'sche Analyse dazu verwendet werden, die Unsicherheit dieses Zeitraums zu quantifizieren und zu verfeinern. Dies ist besonders wertvoll bei der Datierung von Artefakten aus Zeiträumen, in denen mehrere historische Ereignisse stattfanden. Zudem ist die Bayes'sche Methode auch bei der Überprüfung der Authentizität von Funden nützlich. Durch die Kombination verschiedener Datenquellen, wie z.B. Inschriften, Materialanalysen und Kontextinformationen, können Archäologen die Wahrscheinlichkeit der Echtheit eines Artefakts bestimmen. Trotz ihrer Stärken ist die Anwendung der Bayes’schen Statistik in der Archäologie nicht ohne Herausforderungen. Die Wahl der Prior-Wahrscheinlichkeit kann subjektiv sein und die Methode erfordert eine sorgfältige Überlegung und Expertise. Die Bayes’sche Methode in der Archäologie ein leistungsfähiges Werkzeug, um Datierungen zu verfeinern und die Authentizität von Funden zu überprüfen. Während traditionelle Methoden weiterhin eine zentrale Rolle spielen, ermöglicht der Bayes’sche Ansatz eine nuanciertere und adaptivere Analyse, die das Potential hat, unser Verständnis der Vergangenheit zu vertiefen. T2 - NAHM workshop CY - Bonn, Germany DA - 18.10.2023 KW - Bayes KW - Bernstorf KW - Gold KW - Datierung KW - Herkunft KW - Suchtheorie PY - 2024 AN - OPUS4-61705 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - BAMline@BESSY2 - Advanced Techniques and Applications N2 - Synchrotron radiation sources offer a wide range of possibilities in materials research due to their unique properties in terms of intensity, polarization and adjustability. A basic introduction about the creation and special properties of synchrotron radiation will be given. Examples of current work at BAMline, the high-energy measuring facility of the Federal Institute for Materials Research and Testing at the synchrotron BESSY, are used to illustrate the possibilities and limitations of existing measuring methods.” T2 - GDCH Kolloquium CY - Clausthal-Zellerfeld, Germany DA - 17.11.2022 KW - Synchrotron KW - BAMline KW - XRF KW - XANES PY - 2022 AN - OPUS4-61706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -