TY - CONF A1 - Schröder, Hartmut A1 - Munz, Martin A1 - Böhning, Martin A1 - Lorenz, Edelgard A1 - Kneip, Gisela T1 - New method for testing the resistance to oxidation - Application and Evaluation: Polyolefinic Products T2 - EUROCORR 2006 - Manuscripts T2 - EUROCORR 2006 CY - Maastricht, The Netherlands DA - 2006-09-25 PY - 2006 N1 - Serientitel: EFC-Event – Series title: EFC-Event IS - 280 SP - 1 EP - 8 PB - European Federation of Corrosion CY - Maastricht AN - OPUS4-13706 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schröder, Hartmut A1 - Munz, Martin A1 - Böhning, Martin T1 - A new method for testing and evaluating the long-time resistance to oxidation of polyolefinic products JF - Polymers & Polymer composites N2 - A report is presented on the development of a test for determining the long-term oxidation resistance of polyolefin materials, which is accelerated not only by elevated temperatures but also by increased oxygen pressure and a stirred aqueous medium. The method permits durability tests to be carried out at markedly lower temperatures with reasonable testing durations and significantly reduced diffusion limited oxidation effects and allows for physical and chemical impacts of aqueous media. Oxidative durability can be assessed by autoclave immersion exposures at three different temperatures (60, 70 and 80 degrees C) and 50 bar oxygen pressure and at 80 degrees C and two different oxygen pressures (usually 10 and 20 bar). Accelerated test data are evaluated by modified Arrhenius equations with the application of a three-dimensional regression analysis. The application of the test method to various materials, including PP non-woven materials and geosynthetics is demonstrated. 10 refs. KW - Polyolefin KW - Testing KW - Oxidation KW - Durability KW - Geosynthetics PY - 2008 SN - 0967-3911 SN - 1478-2391 VL - 16 IS - 1 SP - 71 EP - 79 PB - RAPRA Technology Ltd. CY - Shrewsbury AN - OPUS4-17187 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schröder, Hartmut A1 - Munz, Martin A1 - Böhning, Martin T1 - A new method for testing and evaluating the long-tIme resistance to oxidation of polyolefinic products T2 - Addcon World 2007 T2 - 13th International Plastics Additives and Compounding Conference "Addcon World 2007" CY - Frankfurt/M. DA - 2007-09-05 PY - 2007 SN - 978-1-84735-018-3 IS - Paper 7 SP - 1 EP - 10 CY - Shawbury AN - OPUS4-15762 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Gräfe, Boris A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Friese, Martin A1 - Wiggenhauser, Herbert A1 - Mayer, K. ED - M.G. Alexander, ED - H.-D. Beushausen, ED - F. Dehn, ED - P. Moyo, T1 - Ultrasonic imaging of post-tensioned concrete elements: New techniques for reliable localization of grouting defects T2 - Proceedings of the international conference on concrete repair, rehabilitation and retrofitting II T2 - 2nd International Conference on Concrete Repair, Rehabilitation and Retrofitting CY - Cape Town, South Africa DA - 2008-11-24 KW - Post-tensioned concrete KW - Ultrasonic echo KW - Phase evaluation KW - Air-coupled ultrasound PY - 2009 SN - 978-0-415-46850-3 SP - 521 EP - 527 PB - CRC Press CY - Boca Raton AN - OPUS4-20651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mayer, K. A1 - Friese, Martin A1 - Milmann, Boris A1 - Mielentz, Frank A1 - Ballier, G. ED - Odile Abraham, ED - Dérobert, Xavier T1 - Progress in ultrasonic tendon duct imaging T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering (Proceedings) T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Reconstruction calculation KW - SAFT KW - EFIT Modelling KW - Prestressed concrete structures PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 147 EP - 154 AN - OPUS4-20652 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Dombrowski, Felix A1 - Simon, Ulla A1 - Börnstein, Julian A1 - Hodoroaba, Vasile-Dan A1 - Feigl, Michael A1 - Grunow, Sabrina A1 - Gildenhaar, Renate A1 - Neumann, Martin T1 - Influence of gelatine coatings on compressive strength of porous hydroxyapatite ceramics JF - Journal of the European Ceramic Society N2 - Porous ceramics prepared by the foam replication technique have a high porosity and low mechanical stability. It has been reported that coating such porous ceramics with gelatin allows for an improved compressive strength. Little details regarding the influence of important gelatin parameters such as concentration, temperature and drying conditions as well as bloom number which is a measure of the gel rigidity, on this toughening effect are available. This paper investigates the influence of these parameters on compressive strength of gelatin coated porous hydroxyapatite ceramics. It was found that concentration in the gelatin sols has a marked impact whereas sol temperature, bloom number and differing conditions during subsequent drying have only little influence on the compressive strength of the coated ceramics. KW - Films KW - Composites KW - Strength KW - Apatite KW - Biomedical application PY - 2011 DO - https://doi.org/10.1016/j.jeurceramsoc.2010.11.004 SN - 0955-2219 SN - 1873-619X VL - 31 IS - 4 SP - 523 EP - 529 PB - Elsevier Ltd. CY - Oxford AN - OPUS4-23216 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Martin A1 - Mayer, K. A1 - Friese, Martin A1 - Milmann, Boris A1 - Mielentz, Frank A1 - Ballier, G. T1 - Progress in ultrasonic tendon duct imaging JF - European journal of environmental and civil engineering N2 - Ultrasonic imaging of tendon ducts enables the precise localisation of grouting faults in many cases. Additionally to well known criteria for detecting grouting faults in tendon ducts recently new possibilities were developed. Two main effects influence the complex behaviour of wave propagation and reflection: a) different arrangement and number of strands or internal rebars; b) superposition of reflecting signals and different wave modes propagating into the interface region around the tendon duct. In order to understand the experimental results, EFIT modelling is performed (EFIT: Elastodynamic Finite Integration Technique). KW - Ultrasonic imaging KW - Prestressed concrete structures KW - Reconstruction calculation KW - SAFT KW - EFIT modelling PY - 2011 DO - https://doi.org/10.3166/ejece.15.461-485 SN - 1964-8189 VL - 15 IS - 4 SP - 461 EP - 485 PB - Lavoisier CY - Paris AN - OPUS4-23853 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gradt, Thomas A1 - Martin, Martin A1 - Gleim, Tobias T1 - Reibungszahlen von Holz-Holz- und Holz-Stahl-Kontakten für Stoßdämpfer von CASTOR-Behältern T2 - Tagungsband der 63. Tribologie Fachtagung N2 - Holz wird vielfach in Stoßdämpfern von Transportbehältern für radioaktives Material eingesetzt. Dafür wird oftmals Fichtenholz verwendet, das in mehreren Lagen und senkrecht zueinander liegender Faserrichtung zwischen einer inneren und einer äußeren Stahlhülle eingebaut wird. Die Reibung zwischen den dabei entstehenden Grenzflächen ist von entscheidender Bedeutung für die Stoß- und Energieabsorption, z. B. bei einem Aufprall des Behälters auf eine harte Unterlage. Um detaillierte Informationen für entsprechende numerische Simulationen zu bekommen, wurden in dieser Arbeit die Reibungszahlen von Holz-Holz- und Holz-Stahl-Paarungen bei für derartige Behälter relevanten Beanspruchungsbedingungen im Temperaturbereich zwischen -40°C und 90°C gemessen. Die Ergebnisse zeigen eine gleichmäßige, mit steigender Temperatur abfallende Reibung, wobei die Werte für Holz-Stahl-Paarungen zwischen 0,43 bei -40°C und 0,22 bei 90°C sowie für Holz-Holz-Kontakte zwischen 0,3 bei -40°C und 0,24 bei 90°C liegen. T2 - 63. Tribologie-Fachtagung 2022 CY - Göttingen, Germany DA - 26.09.2022 KW - Reibung KW - Holz-Holz-Kontakte KW - Holz-Stahl-Kontakte KW - CASTOR-Behälter KW - Stoßdämpfer PY - 2022 SN - 978-3-9817451-7-7 SP - 23/1 EP - 23/4 AN - OPUS4-56021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Röllig, Mathias A1 - Schmidt, Martin A1 - Maturilli, A. A1 - Helbert, J. T1 - Temperature distribution in powder beds during 3D printing JF - Rapid prototyping journal N2 - Purpose – This purpose of this paper is to report about the temperature distribution in metal and ceramic powder beds during 3D printing. The differing powders are thoroughly characterized in terms of thermal conductivity, thermal diffusivity, emissivity spectra and density. Design/methodology/approach – The temperature distribution was measured in a 3D printing appliance (Prometal R1) with the help of thin thermocouples (0.25 mm diameter) and thermographic imaging. Temperatures at the powder bed surface as well as at differing powder bed depths were determined. The thermal conductivity, thermal diffusivity and emissivity spectra of the powders were measured as well. Numerical simulation was used to verify the measured temperatures. Findings – The ceramic powder heated up and cooled down more quickly. This finding corresponds well with numerical simulations based on measured values for thermal conductivity and thermal diffusivity as well as emissivity spectra. An observed color change at the metal powder has only little effect on emissivity in the relevant wavelength region. Research limitations/implications – It was found that thermocouple-based temperature measurements at the powder bed surface are difficult and these results should be considered with caution. Practical implications – The results give practitioners valuable information about the transient temperature evolution for two widely used but differing powder systems (metal, ceramic). The paramount importance of powder bed porosity for thermal conductivity was verified. Already small differences in thermal conductivity, thermal diffusivity and hence volumetric heat capacity lead to marked differences in the transient temperature evolution. Originality/value – The paper combines several techniques such as temperature measurements, spectral emissivity measurements, measurements of thermal conductivity and diffusivity and density measurements. The obtained results are put into a numerical model to check the obtained temperature data and the other measured values for consistency. This approach illustrates that determinations of surface temperatures of the powder beds are difficult. KW - Rapid prototypes KW - Printers KW - Heat transfer KW - Powders KW - Ceramics KW - Metals PY - 2010 DO - https://doi.org/10.1108/13552541011065722 SN - 1355-2546 VL - 16 IS - 5 SP - 328 EP - 336 PB - MCB University Press CY - Bradford AN - OPUS4-22002 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Milmann, Boris A1 - Feldmann, Rüdiger A1 - Friese, Martin A1 - Wöstmann, Jens A1 - Zoëga, Andreas A1 - Sodeikat, C. T1 - Thickness measurement & quality assurance of floor slabs & diaphragm walls T2 - Structural faults & repair 2010 - International conference and exhibition (Proceedings) T2 - Structural faults & repair 2010 - International conference and exhibition CY - Edinburgh, Scotland, UK DA - 2010-06-15 KW - Ultrasonic echo KW - Radar KW - Impact-echo KW - Synthetic aperture focusing technique (SAFT) KW - Compaction faults PY - 2010 SN - 0-947644-67-9 SP - 1 EP - 9 PB - Engineering Technics Press CY - Edinburgh, Scotland AN - OPUS4-22897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mayer, K. A1 - Ballier, G. A1 - Friese, Martin A1 - Mielentz, Frank A1 - Milmann, Boris T1 - Darstellung des Verpresszustandes von Spannkanälen mit 3D-Ultraschallechoverfahren: Modellierung und Experiment T2 - DGZfP-Jahrestagung 2010 T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Ultraschallecho KW - Rekonstruktionsrechnung KW - SAFT KW - Spannkanäle PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mi.3.B.1) SP - 1 EP - 12 CY - Berlin AN - OPUS4-22900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ewert, Uwe A1 - Martin Tschaikner, Martin A1 - Hohendorf, Stefan A1 - Bellon, Carsten A1 - Haith, M. I. A1 - Huthwaite, P. A1 - Lowe, M. J. S. T1 - Corrosion monitoring with tangential radiography and limited view computed tomography T2 - 42nd Annual Review of Progress in Quantitative Nondestructive Evaluation N2 - Accurate and reliable detection of subsea Pipeline corrosion is required in order to verify the integrity of the pipeline. A laboratory trial was conducted with a representative pipe sample. The accurate measurement of the wall thickness and corrosion was performed with high energy X-rays and a digital detector array. A 7.5 MV betatron was used to penetrate a stepped pipe and a welded test pipe of 3 m length and 327 mm outer diameter, with different artificial corrosion areas in the 24 mm thick steel wall. The radiographs were taken with a 40 x 40 cm² digital detector array, which was not large enough to cover the complete pipe diameter after magnification. A C-arm based geometry was tested to evaluate the potential for automated inspection in field. The primary goal was the accurate measurement of wall thickness conforming to the standard. The same geometry was used to explore the ability of a C-arm based scanner in asymmetric mode for computed tomography (CT) measurement, taking projections covering only two thirds of the pipe diameter. The technique was optimized with the modelling Software aRTist. A full volume of the pipe was reconstructed and the CT data set was used for reverse engineering, providing a CAD file for further aRTist simulations to explore the technique for subsea inspections. T2 - 42nd Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Minneapolis, Minnesota, USA DA - 26.07.2015 KW - Corrosion monitoring KW - Tangential radiography KW - Computed tomography PY - 2016 SN - 978-0-7354-1353-5 DO - https://doi.org/10.1063/1.4940574 SN - 0094-243X VL - 1706 SP - 110003-1 EP - 110003-8 PB - AIP Publishing AN - OPUS4-37555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin-Sanchez, Pedro Maria A1 - Miller, A. Z. A1 - Garcia-Sanchez, A. M. A1 - Martin-Sanchez, Pedro Maria A1 - F.C. Pereira, M. A1 - Afonso, M. J. A1 - Saiz-Jimenez, C. A1 - Spangenberg, J. E. A1 - Jurado, V. A1 - Dionísio, A. A1 - Chaminé, H. I. A1 - Hermosin, B. T1 - Origin of abundant moonmilk deposits in a subsurface granitic environment JF - Sedimentology N2 - Subsurface granitic environments are scarce and poorly investigated. A multi-disciplinary approach was used to characterize the abundant moonmilk deposits and associated microbial communities coating the granite walls of the 16th Century Paranhos spring water tunnel in Porto city (north-west Portugal). It is possible that this study is the first record of moonmilk in an urban subsurface granitic environment. The morphology and texture, mineralogical composition, stable isotope composition and microbial diversity of moonmilk deposits have been studied to infer the processes of moonmilk formation. These whitish secondary mineral deposits are composed of very fine needle fibre calcite crystals with different morphologies and density. Calcified filaments of fungal hyphae or bacteria were distinguished by field emission scanning electron microscopy. Stable isotope analysis revealed a meteoric origin of the needle fibre calcite, with an important contribution of atmospheric CO2, soil respiration and HCO3 − from weathering of Ca-bearing minerals. The DNA-based analyses revealed the presence of micro-organisms related to urban contamination, including Actinobacteria, mainly represented by Pseudonocardia hispaniensis, Thaumarchaeota and Ascomycota, dominated by Cladosporium. This microbial composition is consistent with groundwater pollution and contamination sources of the overlying urban area, including garages, petrol stations and wastewater pipeline leakage, showing that the Paranhos tunnel is greatly perturbed by anthropogenic activities. Whether the identified micro-organisms are involved in the formation of the needle fibre calcite or not is difficult to demonstrate, but this study evidenced both abiotic and biogenic genesis for the calcite moonmilk in this subsurface granitic environment. KW - Biomineralization KW - Carbonate precipitation KW - Granite KW - Moonmilk KW - Needle fibre calcite PY - 2017 UR - https://onlinelibrary.wiley.com/doi/full/10.1111/sed.12431 DO - https://doi.org/10.1111/sed.12431 SN - 1365-3091 VL - 65 IS - 2 SP - 1482 EP - 1503 PB - Wiley AN - OPUS4-43622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feigl, Michael A1 - Nofz, Marianne A1 - Sojref, Regine A1 - Dressler, Martin A1 - Pulz, Robert A1 - Rehmer, Birgit A1 - Feldmann, Ines A1 - Sabel, Martin T1 - Aluminiumoxidschichten für den Oxidationsschutz von Hochtemperaturlegierungen N2 - Effektive Al2O3-Keramik-Schutzschichten könnten die Verwendung preiswerterer Legierungen für Hochtemperaturanwendungen ermöglichen. Die Anforderungen an diese Schichten sind eine gute Haftung, chemische Stabilität und Dichtheit gegen die Umgebungsatmosphäre. T2 - DKG-Jahrestagung/Symposium Hochleistungskeramik CY - Aachen, Germany DA - 23.03.2009 KW - Schichtherstellung KW - Schichttestung KW - Hochtemperaturanwendungen PY - 2009 AN - OPUS4-35836 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Feldkamp, Martin A1 - Linnemann, Konrad A1 - Wille, Frank T1 - Transport of HLW canisters on sea vessels T2 - Proceedings of RAMTrans 2024 N2 - Germany had been transporting spent fuel to the reprocessing plant in Sellafield and La Hague for decades until around 2005. Resulting from the obligation to take back the vitrified high-level waste from reprocessing six CASTOR® HAW28M filled with 168 canisters with radioactive waste in vitrified form were transported from Sellafield to the interim storage facility Biblis in 2020. Rail wagons were used for the transport to the port in Barrow-in-Furness, where they were loaded into a dedicated seagoing vessel, certified as INF Class 3 according to the INF Code. This was the first time that vitrified high level waste with considerable heat load was transported under a German design approval certificate. BAM was involved in the authority assessment of the conditions for the sea transport. For the first transport BAM required among others, assessment of temperature distribution during transport, logging of temperatures of cargo bays and graphical imaging of temperatures of the bay with the cask in order to ensure compliance with temperature specifications, e.g. maximal neutron absorber and gasket temperatures. Special interest was taken in the identification of possible events exceeding the specified temperatures considering the different philosophies of IMDG code and its supplement INF code regarding temperature control of hatches. Results show compliance with assumed conditions. T2 - RAMTrans 2024 CY - London, United Kingdom DA - 14.05.2024 KW - Transport KW - Spent nuclear fuel KW - Ship KW - Sea KW - High level waste PY - 2024 SP - 1 EP - 8 AN - OPUS4-60092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tuma, Dirk A1 - Lozano-Martín, D. A1 - Vega-Maza, D. A1 - Moreau, A. A1 - Martín, M. C. A1 - Segovia, J. J. T1 - Speed of sound data, derived perfect-gas heat capacities, and acoustic virial coefficients of a calibration standard natural gas mixture and a low-calorific H2-enriched mixture JF - Journal of Chemical Thermodynamics N2 - This work aims to address the technical aspects related to the thermodynamic characterization of natural gas mixtures blended with hydrogen for the introduction of alternative energy sources within the Power-to-Gas framework. For that purpose, new experimental speed of sound data are presented in the pressure range between (0.1 up to 13) MPa and at temperatures of (260, 273.16, 300, 325, and 350) K for two mixtures qualified as primary calibration standards: a 11 component synthetic natural gas mixture (11 M), and another low-calorific H2-enriched natural gas mixture with a nominal molar percentage x(H2) = 3 %. Measurements have been gathered using a spherical acoustic resonator with an experimental expanded (k = 2) uncertainty better than 200 parts in 106 (0.02 %) in the speed of sound. The heat capacity ratio as perfect-gas gammapg, the molar heat capacity as perfect-gas Cp,m pg, and the second betaa and third gammaa acoustic virial coefficients are derived from the speed of sound values. All the results are compared with the reference mixture models for natural gas-like mixtures, the AGA8-DC92 EoS and the GERG-2008 EoS, with Special attention to the impact of hydrogen on those properties. Data are found to be mostly consistent within the model uncertainty in the 11 M synthetic mixture as expected, but for the hydrogen-enriched mixture in the limit of the model uncertainty at the highest measuring pressures. KW - Natural gas mixtures KW - Speed-of-sound measurements KW - Equations of state KW - Acoustic virial coefficients PY - 2021 DO - https://doi.org/10.1016/j.jct.2021.106434 SN - 0021-9614 VL - 158 SP - 106434 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-52292 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lozano-Martín, D. A1 - Tuma, Dirk A1 - Vega-Maza, D. A1 - Martín, M. C. A1 - Chamorro, C. R. T1 - Thermodynamic characterization of the (CO2+ O2) binary system for the development of models for CCS processes: Accurate experimental (p, rho, T) data and virial coefficients JF - The Journal of Supercritical Fluids N2 - Continuing our study on (CO2 + O2) mixtures, this work reports new experimental (p, rho, T) data for two oxygen-rich mixtures with mole fractions x(O2) = (0.50 and 0.75) mol·mol−1, in the temperature range T = (250–375) K and pressure range p = (0.5–20) MPa, using a single-sinker densimeter. Experimental density data were compared to two well-established equation-of-state models: EOS-CG and GERG-2008. In the p, T-range investigated, the EOS-CG gave a better reproduction for the equimolar mixture (x(O2) = 0.5), whereas the GERG-2008 performed significantly better for the oxygen-rich mixture (x(O2) = 0.75). The EOS-CG generally overestimates the density, while the GERG-2008 underestimates it. This complete set of new experimental data, together with previous measurements, is used to calculate the virial coefficients B(T, x) and C(T, x), as well as the second interaction virial coefficient B12(T) for the (CO2+ O2) system. KW - Binary mixtures CO2 + O2 KW - Density measurements KW - Equations of state KW - Virial coefficients PY - 2021 DO - https://doi.org/10.1016/j.supflu.2020.105074 SN - 0896-8446 VL - 169 SP - 5074 PB - Elsevier B. V. CY - Amsterdam AN - OPUS4-51670 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lozano-Martín, D. A1 - Martín, M. C. A1 - Chamorro, C. R. A1 - Tuma, Dirk A1 - Segovia, J. J. T1 - Speed of sound for three binary (CH4 + H2) mixtures from p = (0.5 up to 20) MPa at T = (273.16 to 375) K JF - International Journal of Hydrogen Energy N2 - Speed of sound is one of the thermodynamic properties that can be measured with least uncertainty and is of great interest in developing equations of state. Moreover, accurate models are needed by the H2 industry to design the transport and storage stages of hydrogen blends in the natural gas network. This research aims to provide accurate data for (CH4 + H2) mixtures of nominal (5, 10, and 50) mol-% of hydrogen, in the p = (0.5 up to 20) MPa pressure range and with temperatures T = (273.16, 300, 325, 350, and 375) K. Using an acoustic spherical resonator, speed of sound was determined with an overall relative expanded (k = 2) uncertainty of 220 parts in 10^6 (0.022%). Data were compared to reference equations of state for natural gas-like mixtures, such as AGA8-DC92 and GERG-2008. Average absolute deviations below 0.095% and percentage deviations between 0.029% and up to 0.30%, respectively, were obtained. Additionally, results were fitted to the acoustic virial equation of state and adiabatic coefficients, molar isochoric heat capacities and molar isobaric heat capacities as perfect-gas, together with second and third acoustic virial coefficients were estimated. Density second virial coefficients were also obtained. KW - Speed of sound KW - Acoustic resonator KW - Heat capacity PY - 2020 DO - https://doi.org/10.1016/j.ijhydene.2019.12.012 SN - 0360-3199 VL - 45 IS - 7 SP - 4765 EP - 4783 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-50454 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Segovia, J. J. A1 - Tuma, Dirk A1 - Lozano-Martín, D. A1 - Moreau, A. A1 - Martín, M. C. A1 - Vega-Maza, D. T1 - Speed of sound data and acoustic virial coefficients of two binary (N2 + H2) mixtures at temperatures between (260 and 350) K and at pressures between (0.5 and 20) MPa JF - Journal of Chemical Thermodynamics N2 - This work aims to address the technical concerns related to the thermodynamic characterization of gas mixtures blended with hydrogen for the implementation of hydrogen as a new energy vector. For this purpose, new experimental speed of sound measurements have been done in gaseous and supercritical phases of two binary mixtures of nitrogen and hydrogen using the most accurate technique available, i.e., the spherical acoustic resonator, yielding an experimental expanded (k = 2) uncertainty of only 220 parts in 106 (0.022%). The measurements cover the pressure range between (0.5 and 20) MPa, the temperature range between (260 and 350) K, and the composition range with a nominal mole percentage of hydrogen of (5 and 10) mol%, respectively. From the speed of sound data sets, thermophysical properties that are relevant for the characterization of the mixture, namely the second βa and third γa acoustic virial coefficients, are derived. These results are thoroughly compared and discussed with the established reference mixture models valid for mixtures of nitrogen and hydrogen, such as the AGA8-DC92 EoS, the GERG-2008 EoS, and the recently developed adaptation of the GERG-2008 EoS, here denoted GERG-H2_improved EoS. Special attention has been given to the effect of hydrogen concentration on those properties, showing that only the GERG-H2_improved EoS is consistent with the data sets within the experimental uncertainty in most measuring conditions. KW - Speed of sound KW - Acoustic resonance KW - Binary gas mixture PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-551482 DO - https://doi.org/10.1016/j.jct.2022.106791 SN - 0021-9614 VL - 171 SP - 1 EP - 13 PB - Elsevier B. V. CY - Amsterdam AN - OPUS4-55148 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Munz, Martin T1 - Zur nanomechanischen Charakterisierung der Interphase verstärkter Polymere N2 - In der vorliegenden Arbeit wurden mittels eines Rasterkraftmikroskopes (Scanning Force Microscope, SFM) nanomechanische Experimente zur Charakterisierung des Grenzbereiches (Interphase) zwischen einer polymeren Matrix und anorganischen Verstärkungskomponenten durchgeführt. Ziel der Untersuchungen war es, mit Hilfe einer sinusförmigen Modulation der Auflagekraft zwischen SFM-Spitze und Probe innerhalb der polymerseitigen Interphase vorhandene Steifigkeitsgradienten zu detektieren sowie ihren Verlauf zu charakterisieren. Es konnte gezeigt werden, dass die Steifigkeitsmessung im SFM die Möglichkeit bietet, Grenzphasen über die lokalen Änderungen im Elastizitätsmodul quantitativ zu charakterisieren. T3 - BAM Forschungsberichtreihe - 241 PY - 2003 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-2094 SN - 978-3-89701-524-2 SN - 0938-5533 VL - 241 SP - 1 EP - 80 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-209 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Thomas, Hans-Martin T1 - Zur Anwendung des Impuls-Wirbelstromverfahrens in der zerstörungsfreien Materialprüfung N2 - Diese Publikation berichtet einführend über Grundlagen der Wirbelstromprüfung, um dann die derzeit geläufigen Verfahren zu erörtern. Es folgen die Prüfergebnisse der Impuls- Wirbelstromprüfung, wobei nur reine Fehlersignale ohne Einfluss von Störparametern untersucht werden. Ergänzungen durch Beispiele aus dem Bereich der kerntechnischen Qualitätssicherung. T3 - BAM Forschungsberichtreihe - 124 KW - Austenitischer Stahl KW - Impuls-Wirbelstromverfahren PY - 1986 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-3262 SN - 978-3-88314-538-6 SN - 0938-5533 VL - 124 SP - 1 EP - 120 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schickert, Gerald A1 - Krause, Martin A1 - Wiggenhauser, Herbert T1 - Studie zur Anwendung zerstörungsfreier Prüfverfahren bei Ingenieurbauwerken - ZfPBau-Kompendium N2 - Dieses Kompendium enthält in Form einer jederzeit ergänzbaren Loseblattsammlung folgende Abschnitte: Vorwort, Hinweise zur Benutzung, Verzeichnis und Klassifizierung der Geräte und Verfahren, Geräte und Verfahren, Verzeichnis von Lieferanten und Herstellern, Literaturverzeichnis, Index. T3 - BAM Forschungsberichtreihe - 177 PY - 1991 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-2735 SN - 0938-5533 VL - 177 SP - 1 EP - 235 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-273 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Aurich, Dietmar A1 - Martin, Erich T1 - Untersuchungen über die Korngrößenbestimmung mit Ultraschall zur Entwicklung einer für die Praxis geeigneten zerstörungsfreien Meßmethode N2 - Die Ultraschallschwächung in Abhängigkeit von der Frequenz und der Korngröße wurde an Reineisen, St 37, Fe-30 Ni, 100 Cr 6, 18 CrNi 8 und AlZnMg 3 untersucht. Die Korngrößen wurden so gewählt, daß im verfügbaren Frequenzbereich 1\. > 21{D war. Durch Ausgleichsrechnung wurde die Absorptions- und die Streukonstante bestimmt. Bei einphasigen Metallen oder Legierungen mit geringer Heterogenität ist eine Korngrößenbestimmung mit Ultraschall möglich. Die Übereinstimmung zwischen der Theorie der Streuung und dem Experiment ist im Bereich der Rayleighstreuung quantitativ. Das Streuverhalten heterogener Legierungen wird ebenfalls durch die Korngröße, z. B. Größe der Perlitinseln, bestimmt. Ein zusätzlicher Einfluß der Heterogenität besteht. Eingehendere Untersuchungen sind hierzu notwendig. Eine Charakterisierung der Gefügeparameter heterogener Legierungen ist jedenfalls möglich. Die Streukonstante martensitischer Phasen ist von den linearen Abmessungen der Ursprungsphase, bzw. vermutlich von der Länge der Martensitplatten abhängig. Auch zu diesem Problem sind noch weitere Untersuchungen durchzuführen. Die Ultraschallabsorption ist nicht zu vernachlässigen. Bei niedrigen Frequenzen kann sie der Hauptanteil der Schwächung sein. Bei ferromagnetischen Werkstoffen ist die Absorption hauptsächlich auf ferromagnetische Relaxation zurückzuführen. Entmischungsvorgänge können die Absorptionskonstante erheblich beeinflussen. Die Absorptionskonstante kann u. U. weitere Informationen über den Gefügezustand liefern. T3 - BAM Forschungsberichtreihe - 10 PY - 1972 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-4407 SN - 0938-5533 VL - 10 SP - 1 EP - 49 PB - Bundesanstalt für Materialprüfung (BAM) CY - Berlin AN - OPUS4-440 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Neumann, Martin T1 - Untersuchung des Verhaltens stoßdämpfender Bauteile von Transportbehältern für radioaktive Stoffe in Bauartprüfung und Risikoanalyse N2 - Transportbehälter für radioaktive Stoffe mit einer Typ-B-Versandstückzulassung müssen auch bei schweren Unfallbeanspruchungen sicherstellen, dass das radioaktive Inventar sicher umschlossen, eine unterkritische Anordnung gewährleistet und ionisierende Strahlung ausreichend abgeschirmt ist. Bei der Bewertung von Transportbehältern für radioaktive Stoffe im Rahmen der Bauartprüfung sowie für Risikoanalysen beim Transport radioaktiver Stoffe ist eine Simulation des Verhaltens holzgefüllter, stoßdämpfender Bauteile von Transportbehältern von großem Interesse, da diese in einer Unfallsituation einen Großteil der Aufprallenergie aufnehmen und damit die maximale Stoßkraft deutlich verringern. Damit haben die stoßdämpfenden Bauteile maßgeblichen Einfluss auf die Einhaltung der vom Versandstück zu gewährleistenden Schutzziele. Das Verhalten stoßdämpfender Bauteile wird von einer Vielzahl von Parametern wie Stoßdämpferkonstruktion, Materialeigenschaften und Beanspruchungsrandbedingungen beeinflusst. Es bestehen Unsicherheiten bei der Anwendung von vereinfachten numerischen Verfahren zur Berechnung derartiger Bauteile. Für die Simulation mit Hilfe von komplexen numerischen Verfahren wie dynamische Finite-Elemente-Methoden (FEM) ist bisher keine Modellbildung für die Kompression von Holz in axialer Richtung bei großen Deformationen erfolgt. Die in dieser Arbeit durchgeführten Untersuchungen haben sich daher auf die Modellbildung sowie die Untersuchung der Anwendbarkeit verschiedener Modellierungsformen konzentriert. Auf Basis von Erkenntnissen aus der Analyse stoßdämpfender Bauteile von Prototypen von Brennelementtransportbehältern nach einer 9-m-Fallprüfung auf ein unnachgiebiges Fundament und von in dieser Arbeit durchgeführten Stoßversuchen auf Holzproben wurde ein Modell für das Verhalten von Holz bei axialer Beanspruchung und großen Deformationen entwickelt. Das Modell beschreibt die bei der axialen Druckbeanspruchung von Holz auftretende Entfestigung als Funktion der seitlichen Dehnungsbehinderung. Die Energie, die vom Holz absorbiert werden kann, ist umso größer, je größer die seitliche Dehnungsbehinderung ist. Für das stoßdämpfende Bauteil resultiert daraus, dass die Energieabsorptionsfähigkeit des Stoßdämpfers von der Fähigkeit der äußeren Blechstruktur, ein Ausweichen der hoch belasteten Holzpakete zu verhindern, abhängt. Damit wurde ein Modell für das Verhalten von holzgefüllten Stoßdämpfern abgeleitet. Holz muss, um signifikant Energie zu absorbieren, durch starre Behälter- oder Stoßdämpferstrukturen lagestabilisierend abgedeckt sein. Für einen realistischen Vergleich zwischen gemessener und berechneter Stoßdämpferdeformation ist zu der gemessenen Verformung noch eine elastische Rückfederung des stoßdämpfenden Bauteils nach dem Aufprall zu addieren. Das optische, zur Vermessung von dreidimensionalen Objekten entwickelte Messverfahren der Streifenprojektion wurde erstmalig für die Vermessung von stoßdämpfenden Bauteilen von Transportbehältern für radioaktive Stoffe eingesetzt. Das Verfahren ermöglicht die Aufnahme der genauen Objektgeometrie vor und nach dem Versuch und eignet sich somit sehr gut für eine Schadens- und Verformungsdokumentation der stoßdämpfenden Bauteile von in Fallversuchen untersuchten Prüfmustern. Es wurde gezeigt, dass für Behälter mit großen, relativ zueinander beweglichen Massen das verbreitete Bewertungsschema der Begrenzung der Starrkörperverzögerung für eine Beanspruchungsermittlung an den Komponenten des Versandstücks nicht geeignet ist, da das System nicht mehr als Starrkörper aufgefasst werden kann. Es wurde das vereinfachte numerische Verfahren „ImpactCalc“', mit dem Starrkörperverzögerungen und Stoßdämpferdeformationen ermittelt werden können, entwickelt und bewertet. Das Verfahren kann für mechanische Nachweise der Einhaltung der Schutzziele für Versandstücke mit radioaktiven Stoffen in der Bauartprüfung zielführend eingesetzt werden, wenn das Versandstück exklusive der Stoßdämpfer als Starrkörper betrachtet werden kann und ein entsprechender Sicherheitsfaktor angewendet wird. Für die Risikoanalyse können auf einfache und kostengünstige Weise Beanspruchungen durch verschiedene Unfallsituationen, beispielsweise der Aufprall auf reale Fundamente, abgeschätzt und mit dem Aufprall auf das unnachgiebige Prüfstandsfundament verglichen werden. Für Finite-Elemente-Verfahren wurde aufbauend auf den Schlussfolgerungen zum Verhalten von Holz bei Kompression unter großen Deformationen ein kontinuumsmechanisches Ersatzmodell vorgeschlagen, das die seitliche Dehnungsbehinderung als Mehrachsigkeit des Spannungszustandes im Ersatzkontinuum in Betracht zieht. Mit Hilfe des kommerziellen Finite-Elemente-Programms LS-DYNA wurde die Anwendbarkeit verschiedener Materialmodelle auf dieses Ersatzmodell sowie weitere vorgeschlagene Modellierungsformen untersucht. Mit keiner der untersuchten Kombinationen ist es gelungen, global das Verhalten von Holz im Nachbruchbereich inkl. Entfestigung zu modellieren. Durch Simulation eines Fallversuchs mit einer behälterähnlichen Ersatzmasse und stoßdämpfenden Bauteilen wurden verschiedene Modellierungsformen und Detaillierungsgrade für stoßdämpfende Bauteile von Transportbehältern für radioaktive Stoffe untersucht und bewertet. Kann eine weitreichende Verifikation mit experimentellen Methoden vorausgesetzt werden, lässt sich die FEM in Bauartprüfung und Risikoanalyse zielführend für die Beanspruchungsermittlung anwenden. Durch eine experimentelle Verifikation muss das Simulationsmodell an die im Versuch herrschenden Randbedingungen bezüglich der seitlichen Stützung des Holzes angepasst werden. N2 - Transport casks for radioactive materials with a Type-B package certificate have to ensure that even under severe accident scenarios the radioactive content remains safely enclosed, in an undercritical arrangement and that ionising radiation is sufficiently shielded. The impact limiter absorbs in an accident scenario the major part of the impact energy and reduces the maximum force applied on the cask body. Therefore the simulation of the behaviour of impact limiting devices of transport casks for nuclear material is of great interest for the design assessment in the package approval as well as for risk analysis in the field of transport of radioactive materials. The behaviour of the impact limiter is influenced by a number of parameters like impact limiter construction, material properties and loading conditions. Uncertainties exist for the application of simplified numerical tools for calculations of impact limiting devices. Uncertainties exist when applying simplified numerical tools. A model describing the compression of wood in axial direction of wood under large deformations for simulation with complex numerical procedures like dynamic Finite Element Methods has not been developed yet. Therefore this thesis concentrates on deriving a physical model for the behaviour of wood and analysing the applicability of different modelling techniques. A model describing the compression of wood in axial direction under large deformations was developed on the basis of an analysis of impact limiter of prototypes of casks for radioactive materials after a 9-m-drop-test and impact tests with wooden specimens. The model describes the softening, which wood under large deformation exhibits, as a function of the lateral strain constraint. The larger the lateral strain restriction, the more energy wood can absorb. The energy absorption capacity of impact limiter depends therefore on the ability of the outer steel sheet structure to prevent wood from evading from the main absorption zone. This constitutes a model for the compression of impact limiters. In order to absorb significantly energy, wood must be stabilised by stiff cask or impact limiter structures. An elastic recovery has to be added to after the drop test measured deformations. The Projected Fringe Method for the 3-dimensional surface digitalisation was applied successfully for the first time. The method allows determining and charting the surface of the impact limiter in advance and after the test. Therefore it is suitable for a damage and deformation documentation of impact limiting devices subjected to a drop test. A simplified numerical tool for the calculation of rigid body decelerations and impact limiter deformations was developed. This tool can be applied purposefully in the design assessment of transport casks for radioactive materials under certain limitations. For a risk analysis different accident scenarios, for instance the impact on real targets, can be evaluated and compared to the regulatory impact in a simple and cost-efficient way. A full scale model of the CONSTOR V/TC was subjected to a 9-m-drop-test. The rigid-body- deceleration as an evaluation scheme, which is widely used up to now is not suited for an assessment of the loading of the package under accident conditions for casks like the CONSTOR V/TC with large, relative to each other movable masses. The cask can not be treated as a rigid body. A substitute model on the basis of conclusions from impact limiter analysis and wooden specimen impact tests was developed for the axial compression of wood. The substitute model takes the lateral strain constraint as triaxiality of the stress field into account. The applicability of different material formulations for the substitute model as well as further modelling techniques was analysed. Of the proposed combinations none could simulate the behaviour of wood under large deformations in an acceptable manner. Different modelling strategies for impact limiter of radioactive materials transport packages analysed and evaluated. The Finite Element Method can by applied purposeful in type assessment and in risk analysis. Prerequisite is an extensive verification with experimental methods, where the boundary conditions of the simulation have to be adjusted to the conditions in the impact limiter concerning lateral strain restriction. T3 - BAM Dissertationsreihe - 45 KW - Simulation KW - Holz KW - stoßdämpfende Bauteile KW - Transportbehälter KW - radioaktive Stoffe KW - Simulation KW - wood KW - impact limiter KW - transport casks KW - radioactive material PY - 2009 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1135 SN - 978-3-9812354-8-7 SN - 1613-4249 VL - 45 SP - 1 EP - 205 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-113 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Martin, Tina T1 - Anwendung des komplexen elektrischen Widerstandsverfahrens an Eichen (Quercus spp.) N2 - Die Nachfrage nach zerstörungsfreien Prüfungen an Bäumen steigt stetig. Dank neuer Methoden und Messgeräte, entwickelten sich die Möglichkeiten zur Baumdiagnostik in den letzten Jahren immer weiter. Seit kurzem werden auch tomographische elektrische Widerstandsverfahren eingesetzt. Das Ziel dieser Arbeit war es, die Anwendungsmöglichkeiten und Grenzen der Messung des komplexen elektrischen Widerstands an stehenden Bäumen aufzuzeigen und weiterzuentwickeln. Die zusätzliche Erfassung der Phasenverschiebung bietet dabei neue Möglichkeiten zur Detektion von Materialarten und -zustand. Nach vorbereitenden, systematischen Untersuchungen an einem künstlichen, zylindrischen Probekörper wurden spektrale Labormessungen durchgeführt. An Eichenholzproben wurde gezeigt, dass sich die Anisotropie des Holzes stark auf die elektrischen Messungen auswirkt, ebenso wie die Holzfeuchte. Auch Pilzbefall, der in zwei Langzeitversuchen an Eichenkernholz untersucht wurde, zeigte gravierende Auswirkungen auf das elektrische Verhalten, insbesondere auf die Phasenverschiebung. Dadurch war es im Labor möglich, Pilzbefall durch Messungen des komplexen elektrischen Widerstands an Holz nachzuweisen. Bei der tomographischen Anwendung des Verfahrens an stehenden Eichen konnte zunächst gezeigt werden, wie sich der Aufbau gesunder Eichen in den Tomogrammen des spezifischen Widerstands und der Phasenverschiebung widerspiegelt. Dabei wurde eine Abhängigkeit von der Messfrequenz, der Jahreszeit und des Baumalters festgestellt. Bei den anschliessenden Messungen an pilzbefallenen Eichen konnte dann nachgewiesen werden, dass die Detektion von Fäuleschäden an Bäumen mit dem komplexen elektrischen Widerstandsverfahren möglich ist. Allerdings ist die zusätzliche Information der Phasenverschiebung nur bei sehr niedrigen Frequenzen < 1 Hz nutzbar, da dort die im Labor nachgewiesenen Phasenkontraste am größten sind. Die Messungen bei niedrigen Frequenzen haben jedoch eine Erhöhung der Messdauer zur Folge. Das Nutzen-Zeit-Verhältnis für diese zusätzliche spektrale Erfassung der Phase ist gegenüber dem spezifischen Widerstand derzeit jedoch noch gering. Um das Verfahren als alleinstehende Untersuchungsmethode zur Baumdiagnostik zu nutzen, sind weitgehende Untersuchungen für andere Baumarten nötig. In Kombination mit weiteren Verfahren, wie die in dieser Arbeit ebenfalls genutzten Schalltomographie, kann es jedoch bereits jetzt sinnvoll eingesetzt werden. N2 - Non-destructive testing of standing trees has been steadily developed over the past years. Electric measurement methods can make a contribution to tomography investigation methods. The aim of this thesis was to show the possibilities and limitations of using the Spectral Induced Polarisation (SIP) method in standing trees with the help of Complex Resistivity (CR). First, investigations were carried out on an artificial, cylindrical test body to identify the most sensitive electrode material and configuration for the measurements. Another important point was the determination of the resolution in the tomograms. Laboratory measurements on oak samples have shown that wood anisotropy and moisture (saturation) strongly affect the electrical behaviour. Fungi infection, which was simulated in two long-term tests on oaken heartwood, also showed serious effects on the electrical behaviour, in particular on phase shift. The first tomographic use of the SIP method on standing trees took place on healthy oaks to show the characteristic structures in resistivity and phase shift tomograms. The dependence of frequency, the effect of seasons and the differences in the age of the tree were investigated in particular. The previously obtained results were applied and verified in subsequent measurements on standing, fungi-infected oaks. Results on three tree samples, which were cut off after the measurements, were compared to the results of other methods such as acoustic tomography and mechanical drilling. Direct comparison of tomography measurement data with laboratory data obtained afterwards was part of the field measurements. The conclusion of this thesis is that phase effects can provide information on the wood cell structure, as clearly demonstrated by the laboratory measurements. Complex resistivity is suitable for tomographical measurements in field applications but the additional phase Information cannot yet be satisfactorily used because of some practical electrode problems. Due to the wide variety of tree species and the very different electrical behaviour, the SIP method cannot yet be recommended as an exclusive non-destructive test method. Therefore, more investigation is needed. But as an additional tool, for instance in combination with acoustic tomography, the SIP method can already be used. T3 - BAM Dissertationsreihe - 54 KW - Holz KW - Baumuntersuchung KW - Tomographie KW - Pilze KW - SIP PY - 2009 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1042 SN - 978-3-9813346-0-9 SN - 1613-4249 VL - 54 SP - 1 EP - 182 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Ritter, Martin T1 - A landmark-based method for the geometrical 3D calibration of scanning microscopes N2 - Die Arbeit stelle eine neue Strategie und ein daraus abgeleitetes Verfahren zur geometrischen Kalibrierung von 3D Messgeräten im Mikrobereich vor. Das Verfahren beruht auf der Anwendung von räumlichen Kalibrierstrukturen mit Nanomessmarken (Nanomarker). Es konnte erfolgreich für die 3D Kalibrierung von Rasterkraftmikroskopen (SPM) und konfokalen Lasermikroskopen (CLSM) eingesetzt werden. Im Rahmen von vergleichbaren Untersuchungen werden die 3D Kalibrierstrukturen ebenfalls für die photogrammetrische Selbstkalibrierung im Rasterelektronenmikroskop (SEM) verwendet. N2 - This thesis presents a new strategy and a spatial method for the geometric calibration of 3D measurement devices at the micro-range, based on spatial reference structures with nanometer-sized landmarks (nanomarkers). The new method was successfully applied for the 3D calibration of scanning probe microscopes (SPM) and confocal laser scanning microscopes (CLSM). Moreover, the spatial method was also used for the photogrammetric self-calibration of scanning electron microscopes (SEM). In order to implement the calibration strategy to all scanning microscopes used, the landmark-based principle of reference points often applied at land survey or at close-range applications has been transferred to the nano- and micro-range in the form of nanomarker. In order to function as a support to the nanomarkers, slopeshaped step pyramids have been developed and fabricated by focused ion beam (FIB) induced metal deposition. These FIB produced 3D microstructures have been sized to embrace most of the measurement volume of the scanning microscopes. Additionally, their special design allows the homogenous distribution of the nanomarkers. The nanomarkers were applied onto the support and the plateaus of the slope-step pyramids by FIB etching (milling) as landmarks with as little as several hundreds of nanometers in diameter. The nanomarkers are either of point-, or ring-shaped design. They are optimized so that they can be spatially measured by SPM and CLSM, and, imaged and photogrammetrically analyzed on the basis of SEM data. The centre of the each nanomarker serves as reference point in the measurement data or images. By applying image processing routines, the image (2D) or object (3D) coordinates of each nanomarker has been determined with subpixel accuracy. In contrast to the spatial reference structures applied for the spatial calibration method introduced here, present calibration methods for scanning microscopes use sequential measurements of 2D lattice and height step structures. This means that the determination of the scale factor for the height measurement yields an average value for the full scan area. Thus, the height scale factor remains independent of the lateral scanning position, and, therefore, it will be impossible to determine the coupling of the lateral coordinate axes and the z-axis as a shear factor with the sequential calibration method. On this account, an affine geometrical model has been used here, that allows for scale factors in all space directions, and, for coupling between all coordinate axes. With the help of the correlative analysis of the measurement data of all measurement methods applied (SPM, CLSM and photogrammetric SEM), for the first time, all scale factors, as well as the linear coupling of the probes used for the height measurement could be determined dependent on the lateral scanning position. It could be shown that the scanning movement of the SPM and the CLSM is erroneous. Due to hysteresis effects and guidance errors of the scanning generators, due to errors and peculiarities of the control cycle, and because of misaligned attachment of the probe with respect to the scanning plane, the measurement coordinate system is not identical to the ideal reference coordinate system. Scale and orthogonality of the measurement coordinate system have to be calibrated and corrected, in order to maintain the traceability to the SI-unit meter, and, therefore, to allow for quantitative dimensional 3D measurements. However, the correlative analysis of the SPM, CLSM and photogrammetric SEM measurement data after 3D calibration resulted in mean residues in the measured coordinates of as little as 13 nm. Without the coupling factors the mean residues are up to 6 times higher. By taking into account the orthogonality of the measurement coordinate axes when performing a 3D calibration, a comparative and quantitative analysis of 3D scanning microscopy has been made possible. T3 - BAM Dissertationsreihe - 21 KW - landmark-based method KW - scanning microscopes KW - geometrical 3D calibration PY - 2007 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1373 SN - 978-3-86509-630-2 SN - 1613-4249 VL - 21 SP - 1 EP - 141 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Wolf, Martin T1 - Zur Phänomenologie der Heißrissbildung beim Schweißen und Entwicklung aussagekräftiger Prüfverfahren N2 - Zur Ermittlung der Heißrissresistenz beim Schweißen metallischer Werkstoffe können Heißrisstests eingesetzt werden. Obwohl bislang zahlreiche Heißrisstestverfahren entwickelt wurden, kann eine unerwartete Heißrissbildung während der Durchführung von Bauteilschweißungen oftmals nicht verhindert werden. Dies ist einerseits darauf zurückzuführen, dass sich die Bedingungen im Heißrisstest von den thermomechanischen Beanspruchungen einer Bauteilschweißung zu sehr unterscheiden. Andererseits erfolgt die Auswertung der meisten Heißrissversuche mit Hilfe empirischer Parameter, mit denen die eigentlichen Mechanismen der Heißrissentstehung jedoch nur unzureichend quantifiziert werden können. Ein wesentliches Ziel war es daher, aussagekräftige Methoden zur Quantifizierung des Heißrissverhaltens beim Schweißen zu entwickeln und damit einen Beitrag zur Erhöhung der Heißrisssicherheit geschweißter Bauteile zu leisten. N2 - For determining the hot cracking resistance of materials during welding of metallic materials it is possible to employ hot cracking tests. Despite numerous hot cracking tests have been developed till now, unexpected hot cracking during welding cannot always be avoided. This is on the one hand ascribed to the fact that the conditions prevalent in hot cracking testing differ too strongly from the thermomechanical loads imposed during component welding. On the other hand, evaluation of most hot cracking tests is carried out using empiric parameters which, however, fall short of adequate quantification of the actual hot cracking mechanism. A key aim of this study was therefore to develop convincing methods for quantifying the hot cracking behaviour during welding, and thus to make a contribution towards improving the hot cracking resistance of welded components. As a prerequisite, the Modified Varestraint Transvarestraint-Test (MVT-Test) was first upgraded with a view to varying the specimen loading rate over a very wide range up to quasi-instantaneous loading. As test material, Alloy 602 CA was chosen which exhibits a pronounced dependence of hot cracking resistance on the respective shielding gas. With the use of Ar 4.8 and Ar + 1% N2 as shielding gases, hot crack-critical as well as hot crack-uncritical material behaviour could be investigated. For further elucidation of the solidification cracking mechanism, a combined model was first developed which can be used to demonstrate that the solidification crack-critical limiting temperature TER and the solidification crack-critical strain rate (dε/dt)krit are largely independent of each other and must be determined using various test concepts. Numerical temperature calculations with first implementation of the reproduced real weld pool geometries helped to determine the solidification crack-critical limiting temperature for Alloy 602 CA as a function of different welding parameters and of the investigated shielding gases. It is demonstrated that the solidification crack-critical limiting temperature rises significantly with the use of Ar + 1% N2. In addition to this, the solidification crack-critical limiting temperature is significantly dependent on the applied welding parameters. The MVTTest was also used to conduct experiments with variable specimen loading rate in both the Varestraint and the Transvarestraint mode. Various hot cracking parameters determined in these experiments were evaluated quantitatively. With regard to exclusively qualitative determination of the hot cracking resistance of materials it was found that the measurable differences are more distinct in the Varestraint mode than in the Transvarestraint mode. For hot cracking test transferability investigations, the very critical specimen loading rates at which solidification cracking does not occur yet, were experimentally determined in MVTTests. Using the obtained results in conjunction with thermomechanical simulations, the local critical strain rates in the immediate vicinity of the weld pool were calculated. It is shown that the local critical strains and strain rates constitute a crack criterion for the transferability to the newly developed Controlled Tensile Weldability Test (CTW-Test). Keywords: Solidification cracking, liquation cracking, global strain, local strain, transferability, Modified Varestraint Transvarestraint Test, weld pool geometry, hot cracking parameter, Controlled Tensile Weldability Test, Alloy 602 CA. T3 - BAM Dissertationsreihe - 19 KW - Phänomenologie Heißrissbildung KW - Schweißen und Entwicklung aussagekräftiger Prüfverfahren PY - 2006 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1395 SN - 978-3-86509-599-2 SN - 1613-4249 VL - 19 SP - 1 EP - 218 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Leitfaden zur Brandvermeidung bei der Lagerung von Biomasse N2 - Die Menge an genutztem, verarbeitetem und gelagertem Holz steigt von Jahr zu Jahr. In der Folge konnte in den letzten fünf Jahren eine deutlich gestiegene Zahl von Bränden in Holzlagern und -halden festgestellt werden. Viele dieser Brände sind durch Selbstentzündung des Materials verursacht worden. Sind die Ursachen der Selbstentzündung bekannt, kann die Brandentstehung durch geeignete Maßnahmen vermieden werden. Die Fachgruppe II.2 „Reaktionsfähige Stoffe und Stoffsysteme“ der Bundesanstalt für Materialforschung und -prüfung hat in diesem Leitfaden das Thema aufgegriffen und die derzeit vorliegenden Erkenntnisse zusammenfassend dargestellt. Ziel des Leitfadens ist es, die Grundlagen der Selbstentzündung von Biomasse am Beispiel von Holz in übersichtlicher Form darzustellen und daraus praktische Hinweise zur Vermeidung der Selbstentzündung von Holzhalden abzuleiten, um so einen Weg für einen sicheren und nachhaltigen Umgang mit diesem Rohstoff zu ebnen. Dem Leitfaden liegen Ergebnisse des Forschungsvorhabens „Brandvermeidung bei der Lagerung von biogenen Brennstoffen“ zugrunde. Das Projekt wurde innerhalb der Fördermaßnahme „klimazwei – Forschung für den Klimaschutz und Schutz vor Klimawirkungen“ des Bundesministeriums für Bildung und Forschung finanziell gefördert (Förderkennzeichen 01LS05079). Für diese Förderung möchten die Autoren sich bedanken. T3 - BAM Forschungsberichtreihe - 284 PY - 2009 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1678 SN - 978-3-9812354-1-8 SN - 0938-5533 VL - 284 SP - 1 EP - 22 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-167 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Bothe, Martin T1 - Shape Memory and Actuation Behavior of Semicrystalline Polymer Networks N2 - Formgedächtnispolymere (FGPe) können unter Einwirkung eines geeigneten Stimulus ihre Form verändern. Um dieses Verhalten zu ermöglichen, wird eine Deformation mittels ‘Programmierungs’- Verfahren fixiert, wobei das FGP eine stabile, temporäre Form einnimmt. In thermoresponsiven FGPen löst anschließendes Erwärmen entropieelastische Rückstellung in die ursprüngliche Form aus. Um thermoreversible Zweiwege-Aktuation zu realisieren, kann eine zusätzliche Formänderung beim Abkühlen durch ein Kristallisationsphänomen hervorgerufen werden. Mittels zyklischer thermomechanischer Messungen wurden (1) die Formgedächtniseigenschaften (FGEen) und (2) das thermoreversible Aktuationsverhalten sowohl unter konstanter Auflast als auch unter spannungsfreien Bedingungen quantifiziert. Sternförmige Hybridpolymernetzwerke, chemisch quervernetzt durch polyedrisches oligomeres Silsesquioxan und Polyurethan (SPOSSPU) und physikalisch quervernetzte Poly(ester urethan)-Blockcopolymere (PEUe) wurden im Bereich der Schmelz- und Kristallisationstemperaturen ihrer Polyesterweichsegmente untersucht. (1) Insbesondere die SPOSS-PUs mit hoher Quervernetzungsdichte zeigten Formfixier- und Formrückstellbarkeiten von nahezu 100%, während PEUs ausgeprägte FGEen bei hohem eichsegmentanteil aufwiesen. In zweifach programmierten SPOSS-PUs ließen sich darüber hinaus zwei thermisch separierte Rückstellungen induzieren. Selbst eine Einschnürung, die sich während der Verformung von SPOSS-PUs mit hohem Weichsegmentanteil gebildet hatte, war reversibel. (2) Global orientierte Kristallisation führte bei Abkühlung zur Expansion der PEU-Proben, vor allem bei hohem Weichsegmentanteil und nach dem Aufbringen einer starken Deformation. Schmelzen revidierte die Orientierung; die PEU-Probe kontrahierte und komplettierte damit den thermoreversiblen Aktuationszyklus. Unter Auflast konnten multiple Phasenübergänge im polymorphen Weichsegment zwei aufeinander folgende Expansions- und Kontraktionsschritte auslösen, während spannungsfrei verschiedene Formänderungen, z.B. die Zu- und Abnahme von Probenlänge und -dicke sowie Ver- und Entdrehen einer Probe experimentell belegt werden konnten. Die vorgestellte Aktuatortechnologie ermöglicht völlig neue Anwendungen, die bidirektionale, organische Bewegungen nachahmen und wiederholen können. N2 - Shape memory polymers (SMPs) can change their shape on application of a suitable stimulus. To enable such behavior, a ‘programming’ procedure fixes a deformation, yielding a stable temporary shape. In thermoresponsive SMPs, subsequent heating triggers entropy-elastic recovery of the initial shape. An additional shape change on cooling, i.e. thermoreversible two-way actuation, can be stimulated by a crystallization phenomenon. In this thesis, cyclic thermomechanical measurements systematically determined (1) the shape memory and (2) the actuation behavior under constant load as well as under stress-free conditions. Chemically cross-linked, star-shaped polyhedral oligomeric silsesquioxane polyurethane (SPOSS-PU) hybrid polymer networks and physically cross-linked poly(ester urethane) (PEU) block copolymers were investigated around the melting and crystallization temperatures of their polyester soft segments. (1) The SPOSS-PUs showed excellent shape fixities and recoverabilities of almost 100% at high cross-linking density, while PEUs exhibited pronounced shape memory properties at increased soft segment content. Furthermore, two-fold programmed SPOSS-PU specimens were able to recover their initial shape in two thermally separated events. Even a neck, which formed during deformation of SPOSS-PUs with high soft segment content, was reversed. (2) In PEUs, globally oriented crystallization on cooling drove expansion of the sample, in particular at high soft segment content and after application of a strong deformation. Melting reversed that orientation; the PEU sample contracted and thereby completed the thermoreversible actuation cycle. Under load, multiple polymorphic phase transitions enabled two successive expansion and contraction steps, while under stress-free conditions various geometric shape changes, including the increase and decrease of PEU sample length and thickness as well as twisting and untwisting could be experimentally witnessed. Such actuation technology allows for entirely new applications, enabling mimicry of reversible, bidirectional and repeated organic movements. T3 - BAM Dissertationsreihe - 121 KW - Shape Memory Polymers KW - Polymorphism KW - Semicrystalline KW - Actuation KW - Training PY - 2014 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-372 SN - 978-3-9816668-1-6 SN - 1613-4249 VL - 121 SP - 1 EP - 139 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Bärmann, R. A1 - Frielinghaus, R. A1 - Kreschmar, F. A1 - Krogge, O. A1 - Langenberg, K. A1 - Maierhofer, Christiane A1 - Müller, W. A1 - Neisecke, J. A1 - Schickert, M. A1 - Schmitz, V. A1 - Wiggenhauser, Herbert A1 - Wollbold, F. ED - Schickert, G. T1 - Comparison of pulse-echo-methods for testing concrete T2 - Proceedings - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 1995-09-26 KW - Beton KW - Radar KW - Aufprallecho KW - Ultraschall KW - Prüfung PY - 1995 SN - 3-931381-02-1 N1 - Serientitel: BB / DGZfP – Series title: BB / DGZfP SP - 281 EP - 295 PB - DGZfP, Dt. Ges. für Zerstörungsfreie Prüfung e.V. CY - Berlin AN - OPUS4-593 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Ewert, Uwe T1 - Prüfung von bewehrtem Beton mit Radar, Ultraschall-Impulsecho und Durchstrahlverfahren (Erweitertes Abstract) T2 - Tagungsband des ersten franz.-dt. Seminars für zerstörungsfreie Prüfung T2 - Erstes franz.-dt. Seminar für zerstörungsfreie Prüfung CY - Metz, Frankreich DA - 1995-10-12 KW - Beton, bewehrt KW - Prüfung KW - Radar KW - Ultraschall-Impulsecho KW - Durchstrahlungsverfahren PY - 1995 CY - Metz AN - OPUS4-594 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rösch, A. A1 - Hillemeier, B. A1 - Porzig, Ekkehard A1 - Krause, Martin A1 - Maierhofer, Christiane ED - Schickert, G. T1 - Air voids, poor compaction and areas of low concrete strength detection in concrete by pulse velocity measurements T2 - Proceedings - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 1995-09-26 KW - Beton, Stabilität KW - Ultraschall KW - Fehlstelle KW - Hohlraum PY - 1995 SN - 3-931381-02-1 N1 - Serientitel: BB / DGZfP – Series title: BB / DGZfP VL - 2 SP - 895 EP - 902 PB - DGZfP, Dt. Ges. für Zerstörungsfreie Prüfung e.V. CY - Berlin AN - OPUS4-595 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zhang, Yue A1 - Martin, A. A1 - Wolf, G.-U. A1 - Rabe, S. A1 - Worzala, H. A1 - Lücke, B. A1 - Meisel, M. A1 - Witke, Klaus T1 - Structural transformations of VOHPO4.1/2H2O in the Presence of Ammonia JF - Chemistry of materials KW - Vanadium KW - Ammoniak KW - Phosphat KW - Phyrophosphorsäure PY - 1996 SN - 0897-4756 SN - 1520-5002 VL - 8 IS - 5 SP - 1135 EP - 1140 PB - American Chemical Society CY - Washington, DC AN - OPUS4-684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stadthaus, Meinhard A1 - Thomas, Hans-Martin A1 - König, W. A1 - Baugatz, J. A1 - Migoun, N. A1 - Gnusin, A. T1 - Ermittlung der Eignung von Prüfmitteln für die Eindring- und Magnetpulverprüfung nach dem europäischen Normwerk T2 - ZfP in Anwendung, Entwicklung und Forschung - Jahrestagung 2001 T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2001 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/p39/p39.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD PB - DGZfP CY - Berlin AN - OPUS4-1302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Rühe, S. A1 - Krull, R. T1 - Weiterentwicklung der Wirbelstromhandprüftechnik für Schienenfehler T2 - ZfP in Anwendung, Entwicklung und Forschung - Jahrestagung 2001 T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2001 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/p35/p35.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD, CD-ROM PB - DGZfP CY - Berlin AN - OPUS4-1305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Pohl, Rainer T1 - Bewertung von Oberflächenschädigungen an Schienen mittels Wirbelstromverfahren T2 - ZfP in Anwendung, Entwicklung und Forschung - Jahrestagung 2001 T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2001 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/v52/v52.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD PB - DGZfP CY - Berlin AN - OPUS4-1306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Achim A1 - Ecker, Klaus A1 - Görner, Wolf A1 - Merchel, Silke A1 - Procop, Mathias A1 - Radtke, Martin A1 - Riesemeier, Heinrich T1 - X-ray fluorescence analysis at the BAMline T2 - BESSY highlights - annual report 2001 PY - 2002 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2001.pdf#page=253 SN - 0179-4159 SP - 253 EP - 254 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-1322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Reiche, I. A1 - Riederer, J. T1 - A closer look at Albrecht Dürer's drawings (1471-1528) T2 - BESSY highlights 2001 PY - 2002 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/infos/bessy/highlights2001.pdf#page=32 SN - 0179-4159 SP - 32 EP - 33 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-1323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Reiche, I. A1 - Riederer, J. T1 - Non-destructive investigations of Dürer's silver point drawings by Sy-XRF T2 - BESSY highlights - annual report 2001 PY - 2002 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2001.pdf#page=292 SN - 0179-4159 SP - 292 EP - 293 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-1324 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kautek, Wolfgang A1 - Martin, Sven A1 - Krüger, Jörg A1 - Lenzner, Matthias A1 - Fiedler, A. ED - Meunier, M. T1 - Femtosecond laser multi-pulse interaction with optical filters and fabrics T2 - Physics and chemistry of advanced laser materials processing N2 - Optical filters and fabrics are important parts of laser safety equipment such as goggles and curtains. A choice of these materials with varying absorption spectra is investigated with respect to their resistance to Ti:sapphire femtosecond laser radiation (800 nm wavelength, 1 kHz repetition rate). Pulse durations down to 30 fs and multiple-pulse irradiation conditions are employed to evaluate technically relevant damage thresholds. The ablation threshold fluences of the absorbing filters are comparable to those observed for transparent materials with 30-fs-pulses. These investigations together with scanning electron microscopy of the surface morphology after laser treatment provide insight into the interaction mechanism of the short pulses with the materials. T2 - Symposium D - European Materials Research Society CY - Strasbourg, France DA - 2002-06-18 PY - 2002 UR - http://www.emrs-strasbourg.com/files/pdf/2002_SPRING/02_Prog_Dv2.pdf N1 - Serientitel: Applied surface science – Series title: Applied surface science VL - 208/209.2003,1 IS - 1 SP - 1(?) PB - Elsevier CY - Amsterdam AN - OPUS4-1730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Krause, Martin A1 - Wiggenhauser, Herbert A1 - Krieger, J. T1 - Materialtechnische Untersuchung beim Abbruch der Talbrücke Haiger - Durchführung von Ultraschall- und Impakt-Echo-Messungen T2 - Berichte der Bundesanstalt für Straßenwesen, Reihe B (Brücken- und Ingenieurbau) PY - 2002 SN - 0943-9293 IS - 38 SP - 1 EP - 111 PB - Wirtschaftsverl. NW CY - Bremerhaven AN - OPUS4-2217 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Spickermann, J. A1 - Martin, K. A1 - Räder, H.J. A1 - Müllen, K. A1 - Schlaad, H. A1 - Müller, A. H. E. A1 - Krüger, Ralph-Peter T1 - Quantitative analysis of broad molecular weight distributions obtained by MALDI-TOF mass spectrometry JF - European journal of mass spectrometry PY - 1996 SN - 1469-0667 SN - 1356-1049 SN - 1365-0718 IS - 2 SP - 161 EP - 165 PB - IM Publications CY - Chichester AN - OPUS4-2153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Pohl, Rainer T1 - Bewertung von Oberflächenschädigungen an Schienen mittels Wirbelstromverfahren T2 - DGZfP-Jahrestagung 2001: Zerstörungsfreie Materialprüfung - ZfP in Anwendung, Entwicklung und Forschung T2 - DGZfP-Jahrestagung 2001: Zerstörungsfreie Materialprüfung - ZfP in Anwendung, Entwicklung und Forschung CY - Berlin, Germany DA - 2001-05-21 PY - 2001 AN - OPUS4-3397 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin T1 - Automated Evaluation of Eddy Current Measurements T2 - NDT in progress, Meeting of NDT-Experts T2 - NDT in progress, Meeting of NDT-Experts CY - Trest', Czech Republic DA - 2001-06-20 PY - 2001 AN - OPUS4-3380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Rühe, S. T1 - Automatische Auswertung von Wirbelstrombildern T2 - DGZfP-Jahrestagung 1999: 10 Jahre Vereinigung der ZfP in Deutschland T2 - DGZfP-Jahrestagung 1999: 10 Jahre Vereinigung der ZfP in Deutschland CY - Celle, Germany DA - 1999-05-10 PY - 1999 AN - OPUS4-3382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin T1 - Bestimmung von Ochratoxin A in Lebensmitteln mittels HPLC/MS T2 - Doktorandenseminar BAM / HUB T2 - Doktorandenseminar BAM / HUB CY - Berlin, Germany DA - 2003-02-01 PY - 2003 AN - OPUS4-3734 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schröder, Volkmar A1 - Kluge, Martin A1 - Becker, F. T1 - Explosionsgrenzen von Radiolysegas/Wasserdampf-Gemischen JF - Chemie - Ingenieur - Technik KW - Gasgemische KW - Sicherheitstechnik KW - Kernkraftwerk KW - Radiolysegas KW - Gasexplosion KW - Explosionsgrenzen KW - Explosionsschutz PY - 2004 DO - https://doi.org/10.1002/cite.200403405 SN - 0009-286X SN - 1522-2640 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 76 IS - 7 SP - 942 EP - 945 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-3722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Rühe, S. A1 - v. Hornhardt, A. A1 - Krull, R. T1 - Wirbelstrom-Handprüfsystem für Eisenbahnschienen T2 - ZfP im Übergang zum 3. Jahrtausend (Berichtsband / Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. 73 N2 - Besonders in beweglichen Weichenteilen, wie z.B. Zungen und beweglichen Herzstückspitzen ist die Detektion von Rissen, die zum Bruch des Bauteils führen können, von außerordentlicher Bedeutung. Wegen der komplizierten geometrischen Randbedingungen muß der Schienenprüfzug hier seinen Prüfkopfträger anheben. Aus diesem Grund werden diese Bereiche regelmäßig durch eine manuelle Ultraschallprüfung überwacht. Da auch sehr kleine Anrisse im Oberflächenbereich interessant sind, soll das bereits vorhandene Prüfverfahren durch ein Wirbelstrom-Handprüfsystem so erweitert werden, daß eine sichere Detektion in den gefährdeten Bereichen möglich ist. Aufbau und Wirkungsweise des Wirbelstrom-Handprüfsystems werden erläutert. KW - Wirbelstrom-Handprüfsystem KW - Eisenbahnschienen PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/96.htm SN - 3-931381-32-3 VL - 73-2 IS - 2 SP - 883 EP - 889 PB - DGZfP CY - Berlin AN - OPUS4-879 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Rühe, S. T1 - Automatische Auswertung von Wirbelstrombildern T2 - 10 Jahre Vereinigung der ZfP in Deutschland (Berichtsband ... / Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. 68) N2 - Die Wirbelstromprüftechnik ist eine hochempfindliche Prüfmethode, mit der kleinste Materialschäden in metallischen Prüfkörpern nachgewiesen werden können. Die Prüfung kann berührungslos und bei sehr hohen Prüfgeschwindigkeiten durchgeführt werden. Dies sind beste Voraussetzungen für den Einsatz in automatischen Produktionsanlagen. Die Wirbelstromprüfung kann vielfach direkt in die Produktionslinie von Halbzeugen integriert werden. Zur Abdeckung der gewünschten Prüffläche werden je nach geforderter Prüfempfindlichkeit Durchlaufsensoren, Anordnungen von mehreren Tastsonden oder rotierende Sensoren eingesetzt. Die Entscheidung über das Vorhandensein einer unzulässigen Inhomogenität wird durch das Überschreiten einer festgelegten Signalschwelle festgestellt, wonach eine Aussortierung ausgelöst werden kann. Dieses einfache Kriterium versagt jedoch, wenn durch das Prüfteil Anzeigen hervorgerufen werden, die nach ihrer Herkunft unterschieden werden müssen. Beispielsweise könnte eine Prüfaufgabe so gestellt sein, daß in einem Prüfteil Poren geduldet werden, während rißartige Inhomogenitäten unzulässig sind. Anhand von Beispielen wird gezeigt, wie durch den Einsatz von speziellen Computeralgorithmen an flächenhaft gewonnenen Wirbelstrombildern eine Unterscheidung der Anzeigentypen durchgeführt werden kann. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Wirbelstrombilder PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/17.htm SN - 3-931381-27-7 VL - 1 IS - 68 SP - 163 EP - 171 PB - DGZfP CY - Berlin AN - OPUS4-833 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Junger, M. A1 - Krull, R. T1 - Das Wirbelstromverfahren auf die Schiene gebracht - Prüfung betriebsbedingter Schädigungen an Eisenbahnschienen mit Wirbelstrom-Verfahren T2 - 10 Jahre Vereinigung der ZfP in Deutschland (Berichtsband ... / Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. 68) N2 - Das Streckennetz der Deutschen Bahn unterliegt einer permanenten Überwachung. Nach der deutschen Vereinigung hat es sich in seinem zusammenhängenden Umfang nochmals deutlich vergrößert. - Grund genug, nach neuen und verbesserten Prüfverfahren zu suchen, um einerseits die größtmögliche Sicherheit des Schienenverkehrs zu erreichen und andererseits den Unterhalt des Schienennetzes möglichst wirtschaftlich zu gestalten. Seit vielen Jahren werden ZfP-Verfahren zur Prüfung eingebauter Schienen eingesetzt, wie zum Beispiel Ultraschall-Verfahren. Relativ jung ist dagegen der Einsatz von Wirbelstrom-Verfahren, der zur Zeit in großem Umfang in Laborversuchen erprobt wird. Hierbei ist die Bewertung betriebsbedingter Schädigungen hinsichtlich der Schadenstiefe und des Schädigungs-Schweregrades besonders wichtig. Es wird über die Untersuchungen an typischen Schädigungen (wie Headchecks und Squats) berichtet und die Möglichkeiten, mit speziell angepaßten Wirbelstrom-Sensoren und Wirbelstrom-Verfahren eine möglichst gute Zuordnung zu Schadenstiefe und Schädigungs-Schweregrad vorzunehmen. Anhand der erreichten Ergebnisse wird außerdem über die eingesetzten bildgebenden Auswerteverfahren und intelligenten Signalverarbeitungsmethoden berichtet. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Wirbelstrom-Verfahren PY - 1999 UR - http://www.ndt.net/abstract/dgzfp99/data/20.htm SN - 3-931381-27-7 VL - 1 IS - 68 SP - 189 EP - 197 PB - DGZfP CY - Berlin AN - OPUS4-834 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert A1 - Krause, Martin A1 - Krieger, J. ED - Medlock, R. T1 - Tests and assessments of NDT methods for concrete bridges T2 - Structural materials technology III N2 - A research project is described involving a comparison of different non-destructive test methods for concrete bridges. A cooperative test series was started with the aim to compare and evaluate the performance and benefits of the latest technical developments in this field. For this purpose test specimens with localized defects were produced. Different modifications of radar, ultrasonic-echo and impact-echo methods were investigated. Including two- and three- dimensional reconstruction models. The experiments were accompanied by numerical simulation of the propagation of sound waves and microwaves. The results showed that the radar and the ultrasonic methods were efficient tools to locate the tendon ducts accurately if the reinforcing bars were not to narrowly spaced. The ultrasonic imaging methods were capable of identifying injection and compaction faults in a blind test. The good performance of the impact-echo method with regard to locating tendon ducts which was claimed in several publications could not be validated in the present investigations. The simulation models provided valuable information on how to improve the experimental test program and its evaluation. T2 - Structural materials technology III CY - San Antonio, TX, USA DA - 1998-03-31 KW - Non-destructive testing in civil engineering KW - concrete bridges KW - tendons KW - ducts KW - injection faults KW - compaction faults KW - round robin test KW - ultrasonic testing KW - pulse radar KW - impact-echo KW - reconstruction calculation KW - synthetic aperture focusing technique (SAFT) KW - magnetic stray field KW - ruptures in prestressing reinforcement PY - 1999 SN - 0-8194-2849-3 DO - https://doi.org/10.1117/12.300098 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series VL - 3400 SP - 258 EP - 269 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-829 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Junger, M. A1 - Krull, R. T1 - Wirbelstromprüfung betriebsbedingter Schädigungen an Eisenbahnschienen JF - Stahl und Eisen KW - Wirbelstromprüfung KW - Schienenfehler PY - 1999 SN - 0340-4803 SN - 0340-479x N1 - Sprachen: Deutsch/Englisch - Languages: German/English VL - 119 IS - 12 SP - 107 EP - 110 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-816 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Hofmann, Martin T1 - Auswirkungen von Hindernissen auf Oberflächenexplosionen N2 - Um Oxidationsprozesse in der chemischen Industrie zu optimieren, wird verstärkt versucht, Luftsauerstoff durch reinen Sauerstoff zu ersetzen und den Prozessdruck zu erhöhen. Dadurch werden weitergehende sicherheitstechnische Betrachtungen notwendig. Bisherige Untersuchungen an Systemen bestehend aus einer glatten, ruhenden brennbaren Flüssigkeit unter einer Gasphase aus reinem Sauerstoff bei erhöhtem Anfangsdruck zeigten, dass in solchen Systemen nicht nur deflagrativ verlaufende Reaktionen, sondern auch detonative Reaktionen, sogenannte Oberflächendetonationen, auftreten. Bis dato wurde bei diesen Versuchsreihen hauptsächlich untersucht, unter welchen Anfangsbedingungen Oberflächendetonationen auftreten. Im Rahmen der vorliegenden Arbeit wurden die Vorgänge in einem heterogenen System, bestehend aus Toluol und Sauerstoff, systematisch untersucht. Dabei wurde eine Einteilung der gesamten Verbrennungsreaktion in unterschiedliche Stadien vorgenommen. Diese Stadien sind die Zündung, der Abbrand, die Oberflächendeflagration und die Oberflächendetonation. Mit Experimenten in einem 50 l Kugelautoklav konnte nachgewiesen werden, dass sich die Mechanismen bei einer solchen Oberflächenexplosion grundlegend von den Abläufen bei Explosionen in einem homogenen System unterscheiden. Darüber hinaus konnte nachgewiesen werden, dass Oberflächendetonationen im Gegensatz zu bisherigen Vermutungen über den gesamten untersuchten Druckbereich auftreten können. Ein weiteres Ziel der vorliegenden Arbeit war eine Untersuchung, ob mit einfachen, mechanischen Hindernissen ein sicherheitstechnisches Konzept zur Vermeidung von Oberflächendetonationen möglich ist. Dies muss nach den Ergebnissen der vorliegenden Arbeit verneint werden. Die Versuchsreihen mit unterschiedlichen Hindernissen erbrachten jedoch weitere Informationen über die Mechanismen von Oberflächenexplosionen. Diese Informationen führten zur Formulierung einer neuen Hypothese. Diese Hypothese diskutiert den Einfluss des Energieeintrags von der Flamme in die Flüssigkeit und einen sich daraus ergebenden selbstbeschleunigenden Prozessverlauf. KW - Brennbare Flüssigkeit KW - Sauerstoff KW - Verbrennung KW - Detonation PY - 2001 SP - 1 EP - 121 PB - Technische Universität CY - Berlin AN - OPUS4-1495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Plewinsky, Bodo A1 - Hieronymus, Hartmut A1 - Rockland, Ulrike A1 - Henschen, Philipp A1 - Hofmann, Martin ED - Kreysa, G. T1 - Heterogene Detonationen T2 - Chemische Reaktionen T2 - 35. Tutzing-Symposion CY - Tutzing, Deutschland DA - 1997-03-10 PY - 1997 SN - 3-926959-89-4 SN - 0934-4969 N1 - Serientitel: Praxis der Sicherheitstechnik – Series title: Praxis der Sicherheitstechnik IS - 4 SP - 95 EP - 109 PB - DECHEMA CY - Frankfurt am Main AN - OPUS4-1486 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Colla, Camilla A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Höhberger, H.-J. A1 - Sommer, H. T1 - Combination of NDT techniques for site investigation of non-ballasted railway tracks JF - NDT & E international N2 - Today's civil engineering NDT needs are for quantitative, fast to apply and easy to interpret methods. They are required on site both for evaluation of existing structures/infrastructure and for quality control in new construction. With this purpose, BAM has carried out in-situ feasibility studies, using radar, impact-echo and ultrasonic-echo methods. Two examples are given of their combined application on different railway slab–track constructions, using high frequency radar, scanning impact-echo and ultrasonic array methods. The aim was to evaluate limitations and advantages, comparability and complementarity of these methods. The on-site measurements demonstrated the possibility to investigate, with good accuracy via NDT, the bonding conditions between sleepers and slab, to locate voids and measure layer thickness. The acoustic and electromagnetic methods used, were found to be complementary. KW - Concrete KW - NDT KW - Impact echo KW - Ultrasonics KW - Radar KW - Railway PY - 2002 DO - https://doi.org/10.1016/S0963-8695(01)00033-0 SN - 0963-8695 VL - 35 SP - 95 EP - 105 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-1858 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mielentz, Frank A1 - Krause, Martin A1 - Wüstenberg, Hermann A1 - Wiggenhauser, Herbert ED - Green, R. E. ED - Djordjevic, B. B. ED - Hentschel, M. P. T1 - Development of a phased array transmitting equipment for ultrasonic testing of concrete T2 - Nondestructive characterization of materials XI T2 - 11th International Symposium on Nondestructive Characterization of Materials CY - Berlin, Germany DA - 2002-06-24 PY - 2002 SN - 3-540-40154-7 SP - 605 EP - 613 PB - Springer CY - Berlin AN - OPUS4-1859 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mielentz, Frank A1 - Krause, Martin A1 - Wüstenberg, Hermann T1 - Entwicklung einer Gruppenstrahler-Sendeeinheit für Ultraschalluntersuchungen von Betonbauteilen T2 - ZfP in Anwendung, Entwicklung und Forschung - Jahrestagung 2002 N2 - Zusammenfassung Die Ultraschall Phased-Array-Technik oder auch Gruppenstrahlertechnik wird erfolgreich in der zerstörungsfreien Werkstoffprüfung an Metallen und Kunststoffen eingesetzt. Mit dieser Technik kann durch zeitlich gesteuerte Anregung der einzelnen Wandlerelemente des Arrays das Schallbündel im Probekörper verschoben, geschwenkt und/oder fokussiert werden. Der für Beton anwendbare Frequenzbereich liegt in der Regel von 50 kHz bis 200 kHz. Die Erzeugung der notwendigen Verzögerungen der Sendespannungen für die Schallbündelsteuerung kann in diesem Frequenzbereich durch kommerziell erhältliche Komponenten der Rechnertechnik erreicht werden. Die Hardware-Entwicklung beschränkt sich somit nur auf die Leistungssendestufen und das Interface zwischen dem Steuerrechner und dem Leistungsteil. Die Phased-Array-Sendeapparatur besteht aus einem Steuerrechner mit eingebauten Timerbaugruppen und einem externen Leistungsteil mit 10 eingebauten Sendern für die Ultraschallprüfköpfe. Als Kompromiss zwischen Schaltungsaufwand und bestmöglicher Anregung werden z. Zt. Rechtecksendestufen mit einstellbarer Impulsbreite verwendet. Durch die variable Impulsbreite kann, je nach verwendeten Prüfköpfen, die Anregung optimiert werden. Orientierende Messungen wurden an einem 50 cm dicken Betonprobekörper mit einem Größtkorn von 8 mm durchgeführt. Die Möglichkeiten des Fokussierens und des Schwenkens des Schallbündels sind in Durchschallung überprüft worden. Es erfolgte danach ein Vergleich der Ergebnisse mit einer Modellrechnung auf Grundlage der Punktquellensynthese. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - Ultraschall KW - Beton KW - Ultraschallsender KW - Phased-Array-Technik PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v44/v44.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1860 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eltanany, G. A1 - Munz, Martin T1 - Investigation of interphases between thermoplastic and thermosetting polymers - an AFM approach T2 - Polydays 2002 T2 - Polydays 2002 CY - Berlin, Germany DA - 2002-09-30 PY - 2002 SP - P 6.9 AN - OPUS4-1842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kautek, Wolfgang A1 - Hertwig, Andreas A1 - Martin, Sven A1 - Krüger, Jörg A1 - Lenzner, Matthias A1 - Spielmann, C. A1 - Lenner, M. A1 - Bunte, J. A1 - Puester, T. A1 - Burmester, T. A1 - Fiedler, A. A1 - Heberer, E. A1 - Brose, M. A1 - Stingl, A. A1 - Kiehl, P. A1 - Hönigsmann, H. A1 - Trautinger, F. A1 - Grabner, G. T1 - Safety in Femtosecond Laser Technology - Recent Results of a European Research Project (406) T2 - Conference proceedings & program of the International Laser Safety Conference T2 - International Laser Safety Conference 2003 ; ILSC 2003 CY - Jacksonville, FL, USA DA - 2003-03-10 PY - 2003 SN - 0-912035-38-2 SP - 1(?) EP - 10(?) PB - Laser Institute of America CY - Orlando, Fla. AN - OPUS4-2259 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Harder, Ulrike A1 - Geißler, Heinz A1 - Gaber, Martin A1 - Hähnert, Manfred A1 - Dersch, O. A1 - Rauch, F. T1 - Determination of the water content of alkali lime silica glasses by IR spectroscopy using nuclear reaction analysis for calibration JF - Glass science and technology PY - 1998 SN - 0927-4472 VL - 71 IS - 1 SP - 12 EP - 18 PB - Elsevier CY - Amsterdam AN - OPUS4-2309 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kühbacher, M. A1 - Weseloh, G. A1 - Bertelsmann, H. A1 - Özaslan, M. A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Kyriakopoulos, A. A1 - Behne, D. T1 - Analysis of metal- and metalloid-containing proteins by SRXRF at the BAMline T2 - BESSY highlights - annual report 2002 N2 - Pilot studies have been carried out at the BAMline at BESSY II in collaboration with the Bundesanstalt für Materialforschung und -prüfung (BAM) on metal- and metalloid-containing compounds in biological samples after electrophoretic protein separation. After sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE) and transfer onto a blotting membrane the distribution of selenium among the proteins of testis homogenate of a rat and a wallaby was determined. The comparison with the autoradiogram of 75Se-labeled proteins separated in the same way showed that of nine seleniumcontaining proteins found in rat testis homogenate by autoradiography four could be detected by synchrotron radiation X-ray fluorescence analysis (SRXRF). PY - 2003 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2002.pdf#page=333 SN - 0179-4159 SP - 333 EP - 335 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-2495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Berger, Achim A1 - Buck, St. A1 - Görner, Wolf A1 - Ketelsen, Th. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich T1 - BAMline meets Dürer and van Eyck - Multi-disciplinary investigation of Renaissance silver point drawings by µ-SR-XRF T2 - BESSY highlights - annual report 2002 N2 - - http://www.bessy.de/publications/05.annual_reports/files/AnnualReport2002.pdf - PY - 2003 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2002.pdf#page=416 SN - 0179-4159 SP - 416 EP - 418 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-2496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilde, L. A1 - Schneider, M. A1 - Herein, D. A1 - Riesemeier, Heinrich A1 - Radtke, Martin T1 - XAS measurements on vanadium based compounds at the BAMline T2 - BESSY highlights - annual report 2002 PY - 2003 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2002.pdf#page=215 SN - 0179-4159 SP - 215 EP - 217 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-2490 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Procop, Mathias A1 - Radtke, Martin A1 - Riesemeier, Heinrich T1 - SY-XRF in certification of a reference material at the BAMline T2 - BESSY highlights - annual report 2002 PY - 2003 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2002.pdf#page=311 SN - 0179-4159 SP - 311 EP - 312 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-2492 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Goering, Harald A1 - Hao, Ning A1 - Mach, Reinhard A1 - Oleszak, Franz A1 - Schönhals, Andreas T1 - Molecular Mobility and Gas Transport Properties of Polycarbonate-Based Nanocomposites JF - Reviews on advanced materials science PY - 2003 UR - http://www.ipme.ru/e-journals/RAMS/no_3503/bohning/bohning.html SN - 1606-5131 VL - 5 SP - 155 EP - 159 PB - Advanced Study Center CY - St. Petersburg AN - OPUS4-2884 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Rieck, C. A1 - Hillemeier, B. T1 - Use of Low Frequency Ultrasound Echo Technique to Determine Cavities in Wooden Construction Composites T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p051/p051.htm SN - 3-931381-49-8 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-3230 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin ED - Cziesielski, E. T1 - Ultraschallechoverfahren an Holz T2 - Bauphysik-Kalender 2004 PY - 2004 SN - 3-433-01705-0 SP - 52 EP - 58 PB - Ernst CY - Berlin AN - OPUS4-3145 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Rieck, C. A1 - Hillemeier, B. A1 - Hasenstab, A. T1 - Hohlstellenortung in Holzbalken mit dem Ultraschallverfahren T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung N2 - Zusammenfassung: Sehr klares Echo - der Rückwand - der künstlich eingebrachten Fehlstellen - der Schäden in Faserrichtung (Kernfäulenachbildung) T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 06.05.2002 KW - Kernfäule KW - Standsicherheit KW - Schadenserkennung PY - 2002 AN - OPUS4-3883 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Wiggenhauser, Herbert A1 - Krieger, J. T1 - NDE of a Post Tensioned Concrete Bridge Girder Using Ultrasonic Pulse Echo and Impact Echo T2 - Structural Materials Technology V (SMT): NDE/NDT for Highways and Bridges Topical Conference T2 - Structural Materials Technology V (SMT): NDE/NDT for Highways and Bridges Topical Conference CY - Cincinnati, OH, USA DA - 2002-09-10 PY - 2002 AN - OPUS4-3885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Streicher, Doreen A1 - Krause, Martin A1 - Kroggel, O. A1 - Schickert, M. A1 - Müller, W. T1 - Ultraschallecho an Beton - Definition von Kenngrößen zur Beurteilung der Leistungsfähigkeit von bildgebenden Verfahren T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung N2 - Für die Strukturaufklärung von Betonbauteilen existieren mehrere bildgebende Ultraschallecho-Verfahren, u. a. mit Nutzung des Prinzips der synthetischen Apertur. Die Ergebnisse werden mit unterschiedlichen Verfahren, mit oder ohne Anwendung von Rekonstruktionsrechnungen, ausgewertet und in der Regel als B- bzw. C-Bilder dargestellt. Ziel ist es, die unterschiedlichen Verfahren anhand von Messreihen an Testkörpern mit bekannten Prüfobjekten in Hinblick auf Ihre Leistungsfähigkeit quantitativ zu fassen und zu vergleichen, um den Einsatz der Prüfverfahren bei Untersuchungen unbekannter Objekte zu optimieren. Dazu wurden drei Kenngrößen definiert. Als erster Schritt erfolgte die Anwendung der Definitionen auf vorliegende Messergebnisse zu einer in einem 50 cm dicken Betontestkörper parallel zur Messfläche eingebrachten Bohrung. T2 - DGZfP-Jahrestagung 2002: ZfP in Anwendung, Entwicklung und Forschung CY - Weimar, Germany DA - 06.05.2002 KW - Strukturaufklärung KW - Rekonstruktionsrechnungen KW - Betontestkörper PY - 2002 AN - OPUS4-3896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Junger, M. A1 - Hintze, H. A1 - Krull, R. A1 - Rühe, S. T1 - Pioneering inspection of railroad rails with eddy currents JF - The e-journal of nondestructive testing & ultrasonics N2 - Using a rail-inspection train, the Deutsche Bahn's system of railroads is continuously checked for traffic-induced defects. Until now, only ultrasonic inspection was used. In addition, eddy-current inspection could successfully and efficiently be used to detect and evaluate certain surface cracks - so-called head checks. There have already been reports about laboratory tests which proved the general suitability of this test method [1,2]. The next step - described here - consisted of practical trials under real-life conditions. A test system which is able to fulfil the strict requirements (test speeds of up to 100 km/h, complex probe guidance, suppression of electrical and mechanical interference, recording of data, filtering and evaluation of data) was developed. As part of the rail-inspection train and as a manual system, this inspection system was successfully tested on the Deutsche Bahn's system of railroads under real-life conditions. T2 - 15th World Conference on Non-Destructive Testing (WCNDT) CY - Roma, Italy DA - 2000-10-15 KW - Schienenprüfung PY - 2000 UR - http://www.ndt.net/article/wcndt00/papers/idn796/idn796.htm SN - 1435-4934 VL - 5 IS - 11 SP - 1 EP - 6(?) PB - NDT.net CY - Kirchwald AN - OPUS4-1010 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Krull, R. A1 - Rühe, S. T1 - Prüfung und Analyse von Oberflächenanrissen an verlegten Eisenbahnschienen mit Wirbelstrom T2 - Vorträge des Seminars ZfP zur Anlagenüberwachung T2 - Querschnittseminar. ZfP zur Anlagenüberwachung ; Seminar ZfP zur Anlagenüberwachung CY - Berlin, Deutschland DA - 2000-11-06 KW - Schienenprüfung KW - Wirbelstromprüfung PY - 2000 SN - 3-931381-33-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 74 SP - 31 EP - 38 PB - DGZfP CY - Berlin AN - OPUS4-1011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin T1 - Wirbelstromprüfung an verlegten Eisenbahnschienen T2 - 5. DELTA TEST Fachtagung T2 - 5. DELTA TEST Fachtagung CY - Celle, Deutschland DA - 2000-11-01 KW - Schienenprüfung PY - 2000 SP - 4-1-4-8 AN - OPUS4-1012 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf A1 - Brzezinka, Klaus-Werner A1 - Peuker, Christel A1 - Langer, A. T1 - Analyse von Wasserstoff in Quarzglas T2 - Kurzreferate / 76. Glastechnische Tagung T2 - 76. Glastechnische Tagung CY - Bad Soden, Deutschland DA - 2002-05-27 PY - 2002 SP - 242 EP - 245 PB - DGG, Deutsche Glastechnische Gesellschaft e.V. CY - Frankfurt/M. AN - OPUS4-1636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Wiggenhauser, Herbert A1 - Krieger, J. T1 - NDE of a Post Tensioned Concrete Bridge Girder Using Ultrasonic Pulse Echo and Impact Echo T2 - Structural materials technology V T2 - 5th Structural Materials Technology NDT Conference CY - Cincinnati, OH, USA DA - 2002-09-10 PY - 2002 SN - 1-571-17094-4 VL - 5 SP - 386 EP - 395 PB - American Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-1978 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Berger, Achim A1 - Ecker, Klaus A1 - Görner, Wolf A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Segebade, Christian T1 - Strahlenverfahren in Kombination - ein Werkzeug für Analyse und Zertifizierung von Feststoffen T2 - 12. Jahreskolloquium "Analyse von Feststoffen unterschiedlicher Materialien aus Industrie und Umwelt" T2 - 12. Jahrescolloquium "Analyse von Feststoffen unterschiedlicher Materialien aus Industrie und Umwelt" CY - Berlin, Deutschland DA - 2002-11-19 PY - 2002 SP - 1(?) AN - OPUS4-2025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schönhals, Andreas A1 - Goering, Harald A1 - Böhning, Martin A1 - Fritz, Andreas A1 - Rübner, J. T1 - Structure Analysis of Polymeric Nanomaterials by Relaxation Spectroscopy T2 - Polydays 2002 T2 - Polydays 2002 CY - Berlin, Germany DA - 2002-09-30 PY - 2002 SP - 1(?) AN - OPUS4-2044 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Goering, Harald T1 - Herstellung und Charakterisierung von Nanopartikel/Polymer Composites T2 - BAM-Seminar der Abteilung VI "Funktion von Polymeren" T2 - BAM-Seminar der Abteilung VI "Funktion von Polymeren" CY - Berlin, BAM, Deutschland DA - 2002-09-19 PY - 2002 AN - OPUS4-2040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Goering, Harald A1 - Hao, Ning A1 - Schönhals, Andreas T1 - Gas Transport in Polymer based Nanocomposite Systems T2 - Workshop "Glasübergang" im Sonderforschungsbereich "Heterogene Polymersysteme" der Universität Halle T2 - Workshop "Glasübergang" CY - Rostock, Germany DA - 2002-12-16 PY - 2002 AN - OPUS4-2054 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krull, R. A1 - Hintze, H. A1 - Thomas, Hans-Martin A1 - Heckel, Thomas T1 - ZfP an Schienen heute und in der Zukunft T2 - Werkstoffe für die Systemtechnik Bahn T2 - DVM-Tag 2003 CY - Berlin, Deutschland DA - 2003-05-07 KW - Schienenprüfung KW - Wirbelstromprüfung KW - Ultraschall KW - Head Checks KW - Gruppenstrahlertechnik PY - 2003 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 670 SP - 141 EP - 151 PB - DVM CY - Berlin AN - OPUS4-2522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Görner, Wolf A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riesemeier, Heinrich T1 - Schwefelbestimmung in Kraftstoffen mittels SYRFA T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2003 N2 - Orientierende Versuche zur Schwefelbestimmung in Kraftstoffen haben gezeigt, dass die Röntgenbeamline der BAM bei BESSY II geeignet ist, Schwefel auch in kleinen Konzentrationen zu bestimmen. Da das Verfahren der synchrotronstrahlungsinduzierten Röntgenfluoreszenzanalyse (SYRFA) für den Vor-Ort-Einsatz nicht geeignet ist, ist das Ziel der Untersuchungen, durch Variation von Anregungsenergie und -geometrie mögliche Quellen für systematische Fehler zu untersuchen. Durch geeignete Korrekturfaktoren kann dann die Richtigkeit der Analyseergebnisse gewährleistet werden. Das Verfahren soll dann als Alternative bzw. Ergänzung zu zerstörenden Verfahren der Schwefelanalyse Anwendung finden. Damit wird ein Beitrag zur künftigen Herstellung zertifizierter Referenzmaterialien (ZRM) geleistet. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 2003-05-26 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/p05/p05.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD PB - DGZfP CY - Berlin AN - OPUS4-2558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Riesemeier, Heinrich A1 - Riederer, J. A1 - Reiche, I. T1 - Spatial resolved trace analysis of Dürer's silver point drawings by means of SR-XRF T2 - EDXRS 2002 - European Conference on Energy Dispersive X-Ray Spectrometry T2 - EDXRS 2002 - European Conference on Energy Dispersive X-Ray Spectrometry CY - Berlin, Germany DA - 2002-06-16 PY - 2002 AN - OPUS4-2993 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Merchel, Silke A1 - Riesemeier, Heinrich A1 - Görner, Wolf T1 - Erste Erfahrungen mit der Röntgenfluoreszenzspektrometrie an der BAMline beim Elektronenspeicherring BESSY II T2 - 9. Anwendertreffen Röntgenfluoreszenz- und Funkenmissionsspektrometrie T2 - 9. Anwendertreffen Röntgenfluoreszenz- und Funkenmissionsspektrometrie CY - Dortmund, Germany DA - 2002-03-04 PY - 2002 AN - OPUS4-2990 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Instrumentation for the BESSY micriprobe T2 - Workshop on "An Application of Microfocus X-Ray Sourses in Material- Enviromental-, Life-Science and Archeometry" T2 - Workshop on "An Application of Microfocus X-Ray Sourses in Material- Enviromental-, Life-Science and Archeometry" CY - Berlin, Germany DA - 2002-09-03 PY - 2002 AN - OPUS4-2991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Mayer, K. A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - 3D-Visualisation of NDT-Data using Data Fusion Technique T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) N2 - Non-destructive testing (NDT) of concrete structures is performed using pulse-echo methods. According to the type of the applied waves it can be classified as acoustic (Impact-Echo, Ultrasonics) and electromagnetic methods (Radar). The results are visualised through different imaging processes. This work is performed in the frame of a research project promoted by Deutsche Forschungsgemeinschaft (FOR384).The objective of data fusion is to use the complementary information of the different methods. Radar can detect metallic reflectors in concrete (metallic ducts and concrete reinforcement) very well. This method is not able to locate defects behind these reflectors (injecting defects, defects behind close concrete reinforcement), because the electromagnetic waves are completely reflected at metals. The acoustic methods are able to compensate this deficit i.e. acoustic waves can penetrate through metal. But acoustic waves in the ultrasonic range are completely reflected by air layers. Air layers have smaller influence on radar propagation, so that both methods complement each other.In order to be able to combine the NDT-data from several methods records at the same volume, the different data setsmodes of signals must be adapted. The ultrasonic and radar data have to be reconstructed with programs based on the Synthetic Aperture Focusing Technique (SAFT) before data fusion. Subsequently, a conversion of the data into a uniform format has to be carried out. This is a prerequisite in order to keep the data exchange between the project partners as simple as possible. After the data sets are imported and transferred into a common reference system, they can be processed with operations according to the purpose of the investigation. Results, which have been achieved in concrete test specimen with radar and ultrasonics, will be presented and will show the feasibility of the data fusion method. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Radar KW - Ultrasonic KW - Data Fusion PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v023/v023.htm SN - 3-931381-49-8 SP - 1 EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-3053 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohl, Christoph A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Streicher, Doreen A1 - Wiggenhauser, Herbert ED - Mazal, P. T1 - Data fusion of complementary NDT methods applied in civil engineering T2 - NDT in progress : IInd International Workshop of NDT Experts, October 06 - 08, 2003, Prague, Czech Republic, Proceedings T2 - 2nd International Workshop of NDT Experts CY - Prague, Czech Republic DA - 2003-10-06 KW - Non-destructive testing in civil engineering KW - Data fusion KW - Radar KW - Ultrasonics KW - Concrete PY - 2003 SN - 80-2142475-3 SP - 1 EP - 11(?) PB - Univ. of Technology CY - Brno AN - OPUS4-3054 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Altantsog, Pagvajav A1 - Ojunbileg, L. A1 - Tserenshimed, M. A1 - Chadraabal, Shgdariin A1 - Müller, Ralf A1 - Nofz, Marianne A1 - Gaber, Martin A1 - Batdemberel, G. A1 - Sangaa, D. T1 - Some experimental results of glass melting by using sands from Buir nuur JF - Transactions of the construction & architecture corporation PY - 2002 VL - 1 SP - 103 EP - 118 AN - OPUS4-3113 LA - mon AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chadraabal, Shgdariin A1 - Gaber, Martin A1 - Müller, Ralf A1 - Altantsog, Pagvajav A1 - Tserenshimed, M. A1 - Ojunbileg, L. T1 - Degassing features of quartz crystals from the Mongolian pegmatite deposite Gorkhi JF - Proceedings of the institute of physics and technology PY - 2001 VL - 28 SP - 76 EP - 83 AN - OPUS4-3114 LA - mon AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Ralf A1 - Gaber, Martin A1 - Gottschling, Peter T1 - Water release from silicate glass powders JF - Glass science and technology = Glastechnische Berichte PY - 2002 SN - 0946-7475 SP - 92 EP - 97 PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-3117 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Altantsog, Pagvajav A1 - Ojunbileg, L. A1 - Palam, B. A1 - Tserenshimed, M. A1 - Chadraabal, Shgdariin A1 - Müller, Ralf A1 - Nofz, Marianne A1 - Gaber, Martin T1 - Some experimental results of glass melting by using sands from Buir nuur JF - Journal of the Mongolian association of to Wani N2 - We have carried out some laboratory experiments to establish possibilities to melt 16Na2O*10CaO*74SiO2 glasses from consisting of mainly quarz sands of Buir nuur lake. When the sands used directly, the formed glasses had slight blue colour, the origin of which may be connected with aluminium and iron impurities in the sands. Presence of these impurities is confirmed by chemical analyse and ESR study data. Allso have been studied liquid gas extraction phenomena in the sands and melted glass samples and determined some physical properties of them. PY - 2002 VL - 17 SP - 107 EP - 115 AN - OPUS4-3118 LA - mon AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gottschling, Peter A1 - Gaber, Martin A1 - Müller, Ralf T1 - Numerische Simulation von Gasabgabeprozessen aus Glaspulvern T2 - Kurzreferate / 77. Glastechnische Tagung T2 - 77. Glastechnische Tagung CY - Leipzig, Deutschland DA - 2003-05-26 PY - 2003 VL - 77 SP - 140 EP - 143 PB - DGG CY - Offenbach AN - OPUS4-3122 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Gardei, André A1 - Kohl, Christoph A1 - Wiggenhauser, Herbert T1 - Improvement and combination of echo methods for NDT of concrete elements T2 - 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures T2 - 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures CY - Paris, France DA - 2003-05-05 PY - 2003 AN - OPUS4-3069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Eltanany, G. T1 - Investigation of interphases between thermoplastic and thermosetting polymers - an AFM approach T2 - Polydays 2002 T2 - Polydays 2002 CY - Berlin, Germany DA - 2002-09-30 PY - 2002 AN - OPUS4-3135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen A1 - Müller, W. T1 - Ultrasonic Imaging of Concrete Elements: State of the Art Using 2D Synthetic Aperture T2 - Proceedings of NDT-CE 2003, Non-Destructive Testing in Civil Engineering (NDT-CE) T2 - Proceedings of NDT-CE 2003, Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 AN - OPUS4-3090 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf A1 - Peuker, Christel A1 - Brzezinka, Klaus-Werner A1 - Langer, A. T1 - Analyse von Wasserstoff in Quarzglas T2 - 76. Glastechnische Tagung T2 - 76. Glastechnische Tagung CY - Bad Soden, Germany DA - 2002-05-27 PY - 2002 AN - OPUS4-3290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Riesemeier, Heinrich A1 - Reiche, I. A1 - Riederer, J. A1 - Roth, M. T1 - BAMline meets Dürer and Van Eyck: Spatialy resolved SR-XRF analyses of silver point drawings and thier mysterious inscriptions T2 - ICXOM: 17th International Congress on X-ray Optics and Microanalysis T2 - ICXOM: 17th International Congress on X-ray Optics and Microanalysis CY - Chamonix, France DA - 2003-09-22 PY - 2003 AN - OPUS4-3794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin T1 - Beispiele für erfolgreiche ZfPBau-Anwendungen aus der Praxis T2 - Forschergruppe 384, 2. Workshop - Klausursitzung, MFPA Weimar T2 - Forschergruppe 384, 2. Workshop - Klausursitzung, MFPA Weimar CY - Weimar, Germany DA - 2002-09-17 PY - 2002 AN - OPUS4-3861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Hattwig, Martin T1 - Auswirkung von Druckentlastungsvorgängen auf die Umgebung N2 - Es wurde untersucht, wie Druckwelle und Rückstoßkraft von bekannten und leicht bestimmbaren Einflussgrößen abhängen. Die Ergebnisse der Untersuchung gestatten es, den maximal zu erwartenden Oberdruck in der Druckwelle an einer gegebenen Stelle außerhalb des Behälters abzuschätzen. T3 - BAM Forschungsberichtreihe - 66 PY - 1980 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-3842 SN - 0938-5533 VL - 66 SP - 1 EP - 40 PB - Bundesanstalt für Materialprüfung (BAM) CY - Berlin AN - OPUS4-384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Krause, Martin A1 - Müller, W. A1 - Crail, S. T1 - Zerstörungsfreie Risscharakterisierung in Betonbauteilen mit Ultraschall T2 - DGZfP-Berichtsband N2 - Die Risstiefenbestimmung in Festen Fahrbahnen ist hinsichtlich der Dauerhaftigkeit der Konstruktion von wesentlichem Interesse. Im Rahmen eines gemeinsamen Forschungsvorhabens mit der DB AG wurden aus der Literatur bekannte Ansätze bewertet und darauf aufbauend ein Verfahren zur bildgebenden Rissdarstellung entwickelt. Rissüberbrückende Bewehrung sowie Kontaktstellen zwischen den Rissflanken wirken als Schallbrücken und erschweren die Risscharakterisierung, wie bei einem Einsatz an einer Betriebserprobungsstrecke festgestellt wurde. Ein aus der Literatur bekanntes Verfahren der einfachen Laufzeitmessung erwies sich für die Tiefenbestimmung von realen verunreinigten Rissen als ungeeignet. T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen CY - Leipzig, Germany DA - 25.10.2001 PY - 2001 VL - 76-CD SP - 1 EP - 10 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-1188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mittag, Kornelia A1 - Colla, Camilla A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Schneider, Gerhard A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - Zerstörungsfreie Messungen zur Beurteilung des inneren Zustandes fester Fahrbahnen der Deutschen Bahn AG: Vergleichsmessungen an Probeaufbauten im Labor T2 - DGZfP-Berichtsband N2 - Im Rahmen eines FE-Projektes “Inspektion Fester Fahrbahnen“ der BAM und der Deutschen Bahn AG geht es um die Anwendung und weitere Entwicklung zerstörungsfreier Messverfahren zur Beurteilung des Zustandes Fester Fahrbahnen. Nach ersten Versuchsreihen direkt im Gleis wurden für verschiedene Bauarten die charakteristischen Herstellungsbedingungen simuliert und systematisch untersucht. Die kombinierte Anwendung der drei Messverfahren Ultraschall-Array-, Impakt-Echo- und Impuls-Radar-Verfahren wird hier an dem Beispiel “Betonschwelle in Betoneinbettung” dargestellt. T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen CY - Leipzig, Germany DA - 25.10.2001 KW - Impakt-Echo-Messverfahren KW - Impuls-Radar-Messverfahren KW - Ultraschall-Array-Messverfahren PY - 2001 VL - 76-CD SP - 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-1201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hieronymus, Hartmut A1 - Hofmann, Martin A1 - Bender, Josef A1 - Henschen, Philipp A1 - Wendler, Reinhold A1 - Plewinsky, Bodo A1 - Steinbach, J. T1 - Characterization of surface explosions JF - Archivum combustionis PY - 2001 SN - 0208-4198 VL - 21 IS - 2 SP - 117 EP - 125 PB - Wydawn. Naukowe PWN CY - Warszawa AN - OPUS4-1213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krüger, Jörg A1 - Lenzner, Matthias A1 - Martin, Sven A1 - Lenner, M. A1 - Spielmann, C. A1 - Fiedler, A. A1 - Kautek, Wolfgang ED - Phipps, C. R. T1 - Femtosecond laser induced damage in absorbing filters used for laser protection T2 - High-power laser ablation IV N2 - Damage experiments of absorbing filters (Schott BG18 and BG36) were performed with Ti:sapphire laser pulses with durations from 30 fs to 340 fs (800 nm, 1 kHz) in air. The direct focusing technique was employed under single- and multi-pulse irradiation conditions. Ablation threshold fluences were determined from a semi-logarithmic plot of the ablation crater diameter vs. laser fluence. The damage threshold fluence decreases for shorter pulse durations. In the investigated pulse duration range, the measured multi-pulse ablation threshold fluences are practically similar to those of undoped glass material (~1 Jcm-2). That means that the multi-pulse ablation threshold is independent on the doping level of the filters. For more than 100 pulses per spot and all pulse durations applied, the threshold fluence saturates. This leads to technically relevant damage threshold values in the femtosecond laser pulse duration domain. T2 - 4th SPIE's International Conference on High-Power Laser Ablation CY - Taos, NM, USA DA - 2002-04-22 KW - Ablation KW - Damage KW - Eye protection KW - Femtosecond pulse laser KW - Incubation KW - Laser safety KW - Threshold fluence PY - 2002 SN - 0-8194-4524-X DO - https://doi.org/10.1117/12.482109 SN - 1605-7422 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series VL - 1 IS - 4760 SP - 398 EP - 405 PB - SPIE CY - Bellingham, Wash. AN - OPUS4-1550 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pohl, Rainer A1 - Erhard, Anton A1 - Montag, Hans-Joachim A1 - Thomas, Hans-Martin A1 - Wüstenberg, Hermann ED - Forde, M. C. T1 - NDT techniques for railroad wheel and gauge corner inspection T2 - Railway engineering 2002 T2 - 5th Railway Engineering Conference CY - London, England, UK DA - 2002-07-03 KW - Non-destructive testing method KW - Ultrasonic and eddy current techniques KW - Railway track and wheel inspection PY - 2002 SN - 0-947644-49-0 SP - 1 EP - 14(?) PB - Engineering Technics Press CY - Edingburgh AN - OPUS4-1561 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kautek, Wolfgang A1 - Krüger, Jörg A1 - Lenzner, Matthias A1 - Martin, Sven A1 - Lenner, M. A1 - Spielmann, C. A1 - Fiedler, A. ED - Meunier, M. T1 - Single- and multi-pulse femtosecond laser ablation of optical filter materials T2 - Physics and chemistry of advanced laser materials processing N2 - Commercially available absorption filters (Schott BG18 and BG36) were investigated with respect to their single- and multi-pulse ablation threshold using laser pulses from a Ti:Sapphire laser in the range between 30 and 340 fs. It could be observed, that the threshold fluence decreases for shorter pulse durations. The similarity of the measured multi-pulse threshold fluences with those of undoped glass material (around 1 J/cm^2 for a pulse duration of 30 fs) suggests that, for very short pulses, the threshold is independent on the doping level and therefore, linear absorption does not significantly contribute to laser-induced damage. For >100 pulses per spot and all pulse durations applied, the threshold fluences saturate. This independence on the number of applied pulses leads to technically relevant damage threshold values. T2 - Symposium D - European Materials Research Society CY - Strasbourg, France DA - 2002-06-18 PY - 2002 UR - http://www.emrs-strasbourg.com/files/pdf/2002_SPRING/02_Prog_Dv2.pdf N1 - Serientitel: Applied surface science – Series title: Applied surface science VL - 208/209.2003,1 IS - 1 SP - 1(?) PB - Elsevier CY - Amsterdam AN - OPUS4-1588 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Radtke, Martin A1 - Berger, Achim A1 - Ecker, Klaus A1 - Merchel, Silke A1 - Procop, Mathias A1 - Riesemeier, Heinrich A1 - Görner, Wolf A1 - Reiche, I. T1 - Synchrotron induced X-ray fluorescence for trace element analysis T2 - Hamburg Workshop T2 - Hamburg Workshop CY - Hamburg, Germany DA - 2002-09-16 PY - 2002 SN - 3-924330-53-0 SP - 1(?) PB - Gesellschaft Deutscher Chemiker AN - OPUS4-1525 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stadthaus, Meinhard A1 - Thomas, Hans-Martin A1 - Migoun, N. A1 - Porkhorenko, P. A1 - Gnusin, A. ED - Thompson, D. T1 - On the Reliability of the Quantitative Evaluation of Penetrant Systems Quality T2 - Review of progress in quantitative nondestructive evaluation, volume 21 N2 - The market of the penetrant systems is increasing every year. A sensitivity of the penetrant systems is one of the main criteria for a customer. Therefore the importance of reliable result of the determination of penetrant systems sensitivity is increasing as well. It was established in our experiments that repeating the procedure of type testing in accordance with ISO EN 3452-2, in many cases one can obtain rather variable results for the sensitivity level. The goal of our investigations was to establish the principal factors, influencing upon the result of penetrant system type testing. Our results show that the values of the duration of such penetrant inspection technological stages as penetrant and developer applications may be considerably lower than the values recommended by ISO EN 3452-2 for the type testing. At the same time the character of the procedure's realisation of excess penetrant removal and developer application strongly influences upon the type testing results. Some recommendations for obtaining more reliable results of the determination of penetrant system sensitivity are worked out and proposed. ©2002 American Institute of Physics. T2 - 28th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Brunswick, ME, USA DA - 2001-07-29 PY - 2001 SN - 0-7354-0061-X DO - https://doi.org/10.1063/1.1473037 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 615 SP - 1991 EP - 1996 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-1531 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Lohrer, Christian T1 - Der Einfluss des Sauerstoffgehaltes auf das Selbstzündungsverhalten von Staubschüttungen T2 - Tagungsband der 6. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 6. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2002-11-07 PY - 2002 VL - 6 IS - Abschnitt P04 SP - 1(?) EP - 5(?) PB - GVC CY - Düsseldorf AN - OPUS4-2121 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reiche, I. A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich T1 - Dürer's chemischer Fingerprint - Untersuchungen mittels Synchrotron-induzierter Röntgenfluoreszenzanalyse T2 - 5. Erfurter Fachtage für Konservierung und Restaurierung (rescon) T2 - 5. Erfurter Fachtage für Konservierung und Restaurierung CY - Erfurt, Germany DA - 2002-11-28 PY - 2002 AN - OPUS4-2123 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hofmann, Martin A1 - Bender, Josef A1 - Plewinsky, Bodo A1 - Hieronymus, Hartmut A1 - Steinbach, J. T1 - Influence of Obstacles on Surface Detonations T2 - Proceedings of the 2nd Internet Conference on Process Safety T2 - 2nd Internet Conference on Process Safety CY - --- DA - 2000-03-20 PY - 2000 AN - OPUS4-2125 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goering, Harald A1 - Böhning, Martin A1 - Turky, Gamal A1 - Hao, Ning A1 - Schönhals, Andreas T1 - Molecular Dynamics in Polymer Nanocomposites T2 - Workshop "Glasübergang" im Sonderforschungsbereich "Heterogene Polymersysteme" der Universität Halle T2 - Workshop "Glasübergang" CY - Rostock, Germany DA - 2002-12-16 PY - 2002 AN - OPUS4-2061 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krull, R. A1 - Hintze, H. A1 - Thomas, Hans-Martin A1 - Heckel, Thomas T1 - Zerstörungsfreie Prüfung an Schienen heute und in der Zukunft JF - ZEVrail PY - 2003 SN - 1618-8330 VL - 127 IS - 06-07 SP - 286 EP - 296 PB - Siemens CY - Berlin AN - OPUS4-2644 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Bradley, D. ED - Drysdale, D. ED - Molkov, V. T1 - Smouldering Fires of Dusts at Reduced Ambient Oxygen - Experiments and Modelling T2 - 4th International seminar on fire and explosion hazards (Proceedings) T2 - 4th International Seminar on Fire and Explosion Hazards CY - Londonderry, Northern Ireland, UK DA - 2003-09-08 PY - 2004 SN - 1-85923-186-1 VL - 4 PB - FireSERT, University of Ulster CY - Newtonabbey AN - OPUS4-2605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen A1 - Müller, W. T1 - Ultrasonic Imaging of Concrete Elements - State of the Art Using 2D Synthetic Aperture T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) N2 - Since several years ultrasonic imaging techniques are used for testing concrete elements. Combined with a reconstruction calculation they lead to an acoustic imaging of scatterers and reflectors from the inside of the concrete element. For several testing problems it is an advantage to use a two dimensional synthetic aperture and to combine it with a three-dimensional reconstruction calculation (3D-SAFT, Synthetic Aperture Focussing Technique). This enables the analysis of the tested volume by means of B-scans in two directions and C-scans (projections parallel to the surface), respectively. Using the 2D-scanning technique, especially the disturbing influence of the reinforcing rebars can be minimised. In this contribution the state of the art of this method is demonstrated and analysed. Examples of the application are presented, concerning Localisation of honeycombing and compaction faults Characterisation of cracks (especially measuring the crack depth) Investigation of tendon ducts The results presented are obtained in the frame of a research initiative Non-destructive Evaluation of Concrete Structures Using Acoustic and Electromagnetic Echo-Methods supported by the German Science Council (FOR 384 of DFG, Deutsche Forschungsgemeinschaft). The methods are assessed and improved in cooperation with the partners participating in the project. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v051/v051.htm SN - 3-931381-49-8 PB - DGZfP CY - Berlin AN - OPUS4-2606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Gardei, André A1 - Kohl, Christoph A1 - Wiggenhauser, Herbert ED - Naus, D. J. T1 - Improvement and combination of echo methods for NDT of concrete elements T2 - 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures (RILEM proceedings : PRO 29) T2 - 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures CY - Paris, France DA - 2003-05-05 PY - 2003 SN - 2-912143-36-5 IS - 29 SP - 137 EP - 147 PB - RILEM Publications CY - Bagneux AN - OPUS4-2621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Merchel, Silke A1 - Berger, Achim A1 - Görner, Wolf A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Vogl, Jochen A1 - Frisch, A. A1 - Reiche, I. T1 - Kunst- und Kulturgüter unter "Beschuss" T2 - Jahrestagung der Fachgruppe Nuklearchemie und 19. Seminar Aktivierungsanalyse T2 - GDCh-Jahrestagung Chemie 2003 ; Jahrestagung der Fachgruppe Nuklearchemie ; 19. Seminar Aktivierungsanalyse CY - München, Deutschland DA - 2003-10-06 PY - 2003 SN - 3-936028-14-1 N1 - Serientitel: Kurzreferate / GDCh-Jahrestagung Chemie 2003 – Series title: Kurzreferate / GDCh-Jahrestagung Chemie 2003 IS - 5 SP - 68 PB - Gesellschaft Deutscher Chemiker CY - Frankfurt am Main AN - OPUS4-2686 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reiche, I. A1 - Berger, Achim A1 - Merchel, Silke A1 - Riesemeier, Heinrich A1 - Görner, Wolf A1 - Riederer, J. A1 - Roth, M. ED - Simionovici, A. T1 - BAMline meets Dürer and Van Eyck - Spatially resolved SR-XRF analyses of silver point drawings and their mysterious inscriptions T2 - 17th International Conference on X-Ray Optics and Microanalysis T2 - 17th International Conference on X-Ray Optics and Microanalysis ; 17th ICXOM CY - Chamonix, France DA - 2003-09-22 PY - 2003 N1 - Serientitel: Spectrochimica acta : Part B, Atomic spectroscopy – Series title: Spectrochimica acta : Part B, Atomic spectroscopy IS - 59.2004,10/11 SP - 48 PB - Elsevier CY - Amsterdam AN - OPUS4-2690 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pohl, Rainer A1 - Erhard, Anton A1 - Montag, Hans-Joachim A1 - Thomas, Hans-Martin A1 - Wüstenberg, Hermann T1 - NDT techniques for railroad wheel and gauge corner inspection JF - NDT & E international N2 - The development of non-destructive techniques (NDT) techniques for the in-service inspection of railroad wheels and gauge corners was the main activity of the NDT division VIII. 4 at BAM over the last 2 years. For such different components, two different inspection techniques were fundamentally chosen in order to fulfil the end-user requirements. Firstly the inspection of the wheels—rim and disk—should be carried out without dismantling the wheels and using ultrasonic techniques. On the other hand, the inspection of the railroad track surface at a train speed of about 70 km/h should be guaranteed using eddy current techniques. The above-mentioned tasks were a challenge for the lab staff. The accessibility for the wheel inspection was limited due to several impassable barriers such as sand tubes, etc. Eddy current application focused mainly on the detection of head check defects occurring at the gauge corner of the rail. Investigations carried out also showed, that other types of surface defects (e.g. Belgrospis, wheel burns, short-pitch corrugations, etc.) could easily be detected. Some aspects of the inspection system as well as an overview of test results are presented in the current contribution. KW - Ultraschall- und Wirbelstromprüfung KW - Radsätze von Personenverkehrszügen und Schienen KW - Non-destructive testing method KW - Ultrasonic and eddy current techniques KW - Railway track and wheel inspection PY - 2004 DO - https://doi.org/10.1016/j.ndteint.2003.06.001 SN - 0963-8695 VL - 37 IS - 2 SP - 89 EP - 94 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-2655 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich T1 - Silberstiftzeichnungen - Zerstörungsfreie Spurenanalyse mit Synchrotronstrahlung JF - PapierRestaurierung T2 - 10. IADA-Kongress (Internationale Arbeitsgemeinschaft der Archiv-, Bibliotheks- und Graphikrestauratoren) CY - Göttingen, Deutschland DA - 2003-09-21 PY - 2003 SN - 1563-2628 VL - 4 PB - Foto Text Verl. CY - Stuttgart AN - OPUS4-2663 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Stefan A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Pauli, Jutta A1 - Jäger, Christian A1 - Scholz, G. ED - Krämer, V. T1 - Phasentransformationen von anorganisch modifizierten Alumo-Xerogelen T2 - Jahrestagung der Gesellschaft für Thermische Analyse T2 - Jahrestagung der Gesellschaft für Thermische Analyse e.V. CY - Augsburg, Deutschland DA - 2003-09-15 PY - 2003 SP - 1 EP - 2 AN - OPUS4-2668 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kanngießer, B. A1 - Malzer, W. A1 - Fuentes Rodriguez, A. A1 - Reiche, I. A1 - Voigt, F. A1 - Radtke, Martin T1 - 3D micro X-ray fluorescence spectroscopy - combining elemental analysis with chemical speciation T2 - BESSY highlights - annual report 2003 PY - 2004 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2003.pdf#page=495 SN - 0179-4159 SP - 495 EP - 497 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-3513 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Achim A1 - Calligaro, T. A1 - Duval, A. A1 - Görner, Wolf A1 - Guerra, M.-F. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Reiche, I. A1 - Riesemeier, Heinrich A1 - Roth, M. T1 - Study of Ag and Au based historical and archaeological objects by high energy Sy-XRF T2 - BESSY highlights - annual report 2003 KW - Synchrotron KW - XRF analysis KW - Drawings KW - Archaeometry KW - Gold KW - Röntgenfluoreszenzanalyse KW - RFA KW - Zeichnungen KW - Archäometrie KW - Albrecht Dürer KW - gold PY - 2004 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2003.pdf#page=544 SN - 0179-4159 SP - 544 EP - 546 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-3507 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilde, L. A1 - Radnik, J. A1 - Schneider, M. A1 - Herein, D. A1 - Riesemeier, Heinrich A1 - Radtke, Martin T1 - In situ TEY cell for XAS measurements at the BAMline T2 - BESSY highlights - annual report 2003 PY - 2004 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2003.pdf#page=283 SN - 0179-4159 SP - 283 EP - 285 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-3508 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Görner, Wolf A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich T1 - Metallstiftzeichnungen Albrecht Dürers JF - PapierRestaurierung KW - Synchrotron KW - XRF analysis KW - Drawings KW - Archaeometry KW - Röntgenfluoreszenzanalyse (RFA) KW - Zeichnungen KW - Archäometrie KW - Albrecht Dürer PY - 2004 SN - 1563-2628 VL - 5 IS - 2 SP - 30 EP - 38 PB - Foto Text Verl. CY - Stuttgart AN - OPUS4-3570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schröder, Volkmar A1 - Kluge, Martin T1 - Zündgrenzen von Wasserstoff-Sauerstoff-Wasserdampfgemischen unter SWR-typischen Randbedingungen T2 - Tagungsbericht der Jahrestagung Kerntechnik 2004 T2 - Jahrestagung Kerntechnik 2004 ; Annual Meeting on Nuclear Technology 2004 CY - Düsseldorf, Deutschland DA - 2004-05-25 PY - 2004 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 75 EP - 84 PB - INFORUM-Verl. u. Verwaltungsges. CY - Berlin AN - OPUS4-3590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Stadthaus, Meinhard A1 - Thomas, Hans-Martin A1 - Migoun, N.P. A1 - Gnusin, A.B. A1 - Baugatz, J. A1 - König, W. T1 - Sensitivity of penetrant and magnetic particle testing - Performance testing of detection media for penetrant and magnetic particle testing (PT and MT) JF - Materialprüfung = Materials testing N2 - Die Empfindlichkeit von Eindring- und Magnetpulverprüfungen (PT, MT) hängt unter anderem von der Eignung und der Qualität der Prüfmittel ab (für PT bezeichnet als Eindringsystem). Die Ermittlung der Empfindlichkeit erfolgt an Kontrollkörpern mit natürlichen und künstlichen Inhomogenitäten durch Ermittlung der Anzeigenerkennbarkeit als Maß für die Eignung. Die europäischen Normen spezifizieren die Anforderungen an die Prüfmittel für Typen-, Chargen- und Betriebsprüfungen nach pr EN ISO 3452-2 für PT und EN ISO 9934-2 für MT. Dieser Beitrag beschreibt die Ermittlung der Empfindlichkeit von Prüfmitteln sowie deren Qualifizierung bei der Typenprüfung. Die vorgeschlagenen Verfahren wurden durch experimentelle Untersuchungen validiert, bei denen ein Bildverarbeitungssystem zur Ermittlung der Anzeigenerkennbarkeit verwendet wurde. Im Hinblick auf die Qualifizierung der Prüfmittel wird die Zuverlässigkeit der Verfahren diskutiert. PY - 2004 DO - https://doi.org/10.3139/120.100591 SN - 0025-5300 VL - 46 IS - 6 SP - 320 EP - 326 PB - Carl Hanser Verlag CY - München AN - OPUS4-3574 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Wiggenhauser, Herbert A1 - Müller, W. A1 - Schmitz, V. T1 - Ultrasonic imaging of concrete members using an array system JF - NDT & E international KW - Ultrasonic echo KW - Array technique KW - SAFT (Synthetic Aperture Focusing Technique) KW - Tunnels KW - Reinforced concrete KW - Prestressing ducts PY - 2001 SN - 0963-8695 VL - 34 SP - 403 EP - 408 PB - Butterworth-Heinemann CY - Oxford AN - OPUS4-1082 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Stadthaus, Meinhard A1 - Thomas, Hans-Martin A1 - Baugatz, J. A1 - König, W. A1 - Migoun, N. A1 - Gnusin, A. T1 - Performance testing of detection media for magnetic particle and penetrant testing following the European standards T2 - Contrôles non destructifs T2 - Congrès COFREND 2001 CY - Reims, France DA - 2001-04-24 PY - 2001 SP - 1(?) EP - 6(?) PB - COFREND CY - Paris AN - OPUS4-1123 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin T1 - Automated evaluation of eddy current measurements T2 - NDT in progress : Meeting of NDT-Experts, June 20 - 22, 2001, Castle Trest', Czech Republic, Proceedings T2 - Meeting of NDT-Experts CY - Trest', Czech Republic DA - 2001-06-20 PY - 2001 SN - 80-2387263-X SP - 199 EP - 207 PB - Czech Society for Non-Destructive Testing CY - Trest' AN - OPUS4-1124 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Krull, R. A1 - Hintze, H. ED - Edel, K.-O. T1 - Moderne Methoden der zerstörungsfreien Werkstoffprüfung im Oberbau T2 - Tagungsbericht des Internationalen Symposiums "Schienenfehler" (Hochschulforum / FH Brandenburg : Brandenburger Tagungsberichte / FH Brandenburg) T2 - Internationales Symposium "Schienenfehler" 2000 CY - Brandenburg, Deutschland DA - 2000-11-16 PY - 2000 SP - 3-1-3-16 PB - Fachhochsch., Der Rektor CY - Brandenburg AN - OPUS4-1102 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Junger, M. A1 - Krull, R. A1 - Rühe, S. T1 - Erste Erfahrungen beim Einsatz der Wirbelstromprüfung an Eisenbahnschienen T2 - ZfP im Übergang zum 3. Jahrtausend (Berichtsband / Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. 73 N2 - Das Streckennetz der Deutschen Bahn wird mit Hilfe eines Schienenprüfzuges ständig auf betriebsbedingte Schädigungen überwacht. Bisher wurde hier ausschließlich das Ultraschallprüfverfahren eingesetzt. In Ergänzung dazu könnte die Wirbelstromprüfung für den Nachweis und die Bewertung spezieller Oberflächenrisse - sog. Head Checks - erfolgreich und wirtschaftlich sinnvoll eingesetzt werden. Über Laboruntersuchungen, die die grundsätzliche Eignung dieser Prüftechnik zeigten, wurde bereits berichtet. Der nächste Entwicklungsschritt besteht in der praktischen Erprobung unter realen Einsatzbedingungen. Hierbei stellen die hohen Prüfgeschwindigkeiten von bis zu 28 m/s (entsprechend 100 km/h Fahrgeschwindigkeit des Prüfzuges) eine besondere Herausforderung dar. Es gibt zahlreiche Probleme zu bewältigen. Diese betreffen beispielsweise die Sondenführung, die Signalfilterung, die Datenerfassung und die Unterdrückung von Störeinflüssen. Über erste Erfahrungen wird berichtet. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Schienenprüfzug KW - Head checks PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/61.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 617 EP - 624 PB - DGZfP CY - Berlin AN - OPUS4-1107 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Pohl, Rainer T1 - Wirbelstromsonde für die Prüfung von Eisenbahn-Radscheiben T2 - ZfP im Übergang zum 3. Jahrtausend (Berichtsband / Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. 73 N2 - Die Betriebsüberwachung der Radscheiben von Schienenfahrzeugen kann besonders wirt-schaftlich durchgeführt werden, wenn die Prüfung im eingebauten Zustand erfolgen kann. Hierzu kann z. B. eine Oberflächenprüfung nach dem Wirbelstromverfahren eingesetzt werden. Als Optimierungskriterien für die Sondenkonstruktion werden eine sehr hohe Prüfempfindlichkeit gegenüber kleinen Rissfehlern und eine gute Handhabbarkeit bei erschwerter Zugänglichkeit der Prüffläche gefordert. Hierzu wurde eine neuartige Wirbel-stromprüfsonde entwickelt. Die Besonderheit besteht darin, dass der Nachweis von sehr kurzen Rissen bei einer gleichzeitig großen Sensorspurbreite möglich ist. Der Zeitaufwand für die Radscheibenprüfung wird damit gegenüber dem bisherigen Stand der Technik um 2/3 reduziert. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Betriebsüberwachung von Radscheiben KW - Wirbelstromprüfung PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/97.htm SN - 3-931381-32-3 VL - 73-2 IS - 2 SP - 891 EP - 896 PB - DGZfP CY - Berlin AN - OPUS4-1108 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Geißler, Heinz A1 - Peuker, Christel A1 - Brzezinka, Klaus-Werner A1 - Gaber, Martin A1 - Kohl, Anka T1 - OD bands in the IR spectra of a deuterated soda-lime-silica glass JF - Glass science and technology = Glastechnische Berichte PY - 2001 SN - 0946-7475 VL - 74 IS - 7 SP - 210 EP - 214 PB - Verl. d. Dt. Glastechn. Ges. CY - Offenbach AN - OPUS4-1146 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hieronymus, Hartmut A1 - Henschen, Philipp A1 - Hofmann, Martin A1 - Bender, Josef A1 - Wendler, Reinhold A1 - Plewinsky, Bodo A1 - Steinbach, J. ED - Pasman, H. T1 - Hazards of surface explosions T2 - Loss prevention and safety promotion in the process industries T2 - 10th International Conference: Loss prevention and safety promotion in the process industries ; 620th Event of the European Federation of Chemical Engineering CY - Stockholm, Sweden DA - 2001-06-19 PY - 2001 SN - 0-444-50699-3 N1 - Serientitel: EFCE event – Series title: EFCE event IS - 620 SP - 897 EP - 908 PB - Elsevier CY - Amsterdam AN - OPUS4-1156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Krull, R. A1 - Hintze, H. A1 - Luke, M. A1 - Rühe, S. A1 - Junger, M. T1 - Einsatz der Wirbelstromprüfung zur Detektion von Head Checks an Fahrkanten von Schienen JF - Stahl PY - 2002 SN - 0941-0821 IS - 2 SP - 46 EP - 49 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-1405 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Krull, R. A1 - Hintze, H. A1 - Rühe, S. T1 - Erfahrungen beim Einsatz der Wirbelstromprüfung an Schienen T2 - ZfP in Anwendung, Entwicklung und Forschung - Jahrestagung 2002 N2 - Kurzfassung Es wurde eine Prüftechnologie basierend auf dem Wirbelstromverfahren entwickelt, mit der es möglich ist, oberflächennahe Fehler in Schienen zu detektieren und zu bewerten. Die bisherigen Untersuchungen haben gezeigt, dass Fahrkantenfehler (Head Checks) mit Risstiefen bis zu 10 mm bewertet werden können. Darüber hinaus werden weitere Inhomogenitäten und Fehler wie z. B. Schleuderstellen, Belgrospi's und Squats detektiert. Für die Anwendung der Prüftechnologie kommen 4 Anwendungsgebiete in Frage: Ausrüstung von Schienenprüfzügen, Manuelle Schienenprüfung, Ausrüstung von Schienenschleifzügen, Ausrüstung von stationären Schienenprüfständen. Die Prüftechnik befindet sich zur Zeit in der Erprobungsphase. Der Schienenprüfzug der Deutschen Bahn AG wird in Kürze mit einem achtkanaligen Prüfsystem ausgerüstet. Ebenfalls im Erprobungseinsatz befindet sich ein Handprüfsystem zur manuellen Schienenprüfung. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/v36/v36.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mittag, Kornelia A1 - Gardei, André A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert A1 - Giertz, M. T1 - Verfahrensentwicklung zur Qualitätssicherung Fester Fahrbahnen mit zerstörungsfreien Prüfverfahren T2 - Tagungsband des Symposiums Feste Fahrbahn 2002 T2 - Symposium Feste Fahrbahn CY - Berlin, Deutschland DA - 2002-06-12 PY - 2002 SN - 3-9809335-3-9 SP - 1(?) EP - 10(?) PB - IFV Bahntechnik CY - Berlin ET - 2 AN - OPUS4-1395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Stadthaus, Meinhard A1 - Baugatz, J. A1 - König, W. A1 - Migoun, N. P. A1 - Prokhorenko, P. P. A1 - Gnusin, A. B. T1 - Reproducibility Problem for the Procedure of Type Testing of Liquid Penetrants T2 - Proceedings of the 8th ECNDT N2 - Apparently that the type testing procedure should be conducted under the conditions ensuring reproducibility of its outcomes. We investigated various factors effecting upon the reproducibility. To obtain quantitative characteristics of indication’s visibility the image-processing hard-and software were used. It was established that there are two main groups of these factors. The first depends on the differences between various test panels, which are used for type testing. The second one concerns the reproducibility of some stages of penetrant testing procedure (excess penetrant removing and developer application). The recommendations to increase the reproducibility of type testing are developed and illustrated experimentally. The determination of penetrant system sensitivity as a part of type testing should be conducted ensuring reproducibility of the result. We investigated some factors effecting the reproducibility. To obtain quantitative characteristics of indication’s visibility, an image processing system was used [1]. We used 3 different sets of reference blocks (rb1, rb2, rb3) corresponding to type 1 of EN ISO 3452-3 [2]. Two fluorescent penetrants with different sensitivities and the same wet solvent developer were used. It was established that the reproducibility of type testing is influenced by mainly two principal factors. First there are the differences between reference blocks. Second one concerns the reproducibility of penetrant testing procedure, especially excess penetrant removal and developer application. According to EN ISO 3452-3 a reference block for determination of sensitivity level of fluorescent penetrants consists of a set of three nickel-chrome plated panels with 10, 20 and 30 µm plating thickness. Transverse cracks are made in each panel by stretching the panels in the longitudinal direction and width to depth ratio of the cracks should be approximately 1/20. Each panel presents a certain sensitivity level, which is characterised by the level of visibility of the indication. The highest level 3 corresponds to the panel with 10 µm thickness plating. Each panel is cut longitudinally (perpendicular to the crack) so that 2 sheets (panels A and B) with nearly the same cracks will be produced. These panels A and B of a reference block are used for relative evaluation, for example to compare sensitivities of two penetrants. It is considered that the application of the same penetrant to both panels with subsequent adequate development results in the same visibility of the indications on these panels. Quantitative correlations between the abilities of the reference blocks used for determining of the sensitivity were obtained in our investigations. We used the relations between the measured values of light-fluxes from the indications of similar comparing areas on two panels. These indications correspond to certain cracks’ parts of the same total length on both comparing areas. The relations of the steps between the panel are responsible for the definition of the sensitivity groups. From our investigations it follows that the steps of the different sets are different. Besides it was established that the indication‘s visibility for the same penetrant applied on different reference blocks might have a considerable difference depending on the penetrant sensitivity: the higher penetrant’ sensitivity, the smaller is such a difference between the steps 30/20 and 20/10. For example, for rb3 the relations 30/20 and 20/10 for lower sensitive penetrant (I1) reached factor 3 comparing with factor 2 for higher sensitive penetrant (I2). Some results of the comparison between the 3 sets (rb1, rb2, rb3) investigations are summarised in Table 1 with rb1 as a reference. T2 - 8th ECNDT CY - Barcelona, Spain DA - 2002-06-17 PY - 2002 UR - http://www.ndt.net/article/ecndt02/199/199.htm VL - 8 SP - 1(?) EP - 5(?) PB - European Federation for Non-Destructive Testing CY - Barcelona AN - OPUS4-1396 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Reiche, I. A1 - Riederer, J. A1 - Riesemeier, H. T1 - Spatial Resolved Trace Analysis of Dürer's Silver Point Drawings by Means of SR-XRF T2 - Proceedings of the European Conference on Energy Dispersive X-Ray Spectrometry T2 - European Conference on Energy Dispersive X-Ray Spectrometry (EDXRS) CY - Berlin, Germany DA - 2002-06-16 PY - 2002 SP - 158 AN - OPUS4-1397 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Merchel, Silke A1 - Berger, Achim A1 - Görner, Wolf A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Reiche, I. A1 - Riederer, J. A1 - Duval, A. A1 - Guicharnaud, H. T1 - Non-Destructive Investigations of Dürer's Silver Point Drawings by Pixe and SY-XRF T2 - Proceedings of the 7th International Conference on Non-destructive testing and Microanalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage T2 - 7th International Conference on Non-destructive testing and Microanalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage ; art 2002 CY - Antwerp, Belgium DA - 2002-06-02 PY - 2002 UR - http://srs.dl.ac.uk/arch/publications/reiche/reiche_fullcorr.pdf SP - 82 AN - OPUS4-1400 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Rieck, C. A1 - Hillemeier, B. A1 - Krause, Martin T1 - Hohlstellenortung in Holzbalken mit dem Ultraschallverfahren T2 - ZfP in Anwendung, Entwicklung und Forschung - Jahrestagung 2002 N2 - Zusammenfassung Die Anwendung des Ultraschallecho-Verfahrens zur Hohlstellenortung in Holzbalken wird beschrieben. An Hand der Versuchsergebnisse wird der Einfluss der Anisotropie des Holzes auf die Messkopfanordnung und Schallgeschwindigkeit dargestellt. Mit der optimierten Messanordnung ist die erfolgreiche Detektierung von Nachbildungen von Minderdicken und Kernfäule möglich. Besonders klar sind Schäden in Faserrichtung (Kernfäulenachbildung) nachzuweisen. Die sehr guten Ergebnisse zeigen die Anwendbarkeit des Ultraschallecho-Verfahrens an Holz. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2002 CY - Weimar, Deutschland DA - 2002-05-06 KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschallecho-Experimente an Probekörpern PY - 2002 UR - http://www.ndt.net/article/dgzfp02/papers/p32/p32.htm SN - 3-931381-39-0 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 80-CD PB - DGZfP CY - Berlin AN - OPUS4-1937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmitz, V. A1 - Müller, W. A1 - Krause, Martin A1 - Wiggenhauser, Herbert T1 - Improved Detection of Tendon Ducts and Defects in Concrete Structures Using Ultrasonic Imaging T2 - The Evaluation of Defects, Repair Criteria & Methods of Repair for Concrete Structures on Nuclear Power Plants N2 - At the beginning of the 90s the general opinion was, that ultrasonic inspection methods using pulse-echo technique were not suitable for the inspection of concrete because of the inhomogeneity and the strong scattering behavior of the embedded aggregates. In the meantime the progress in the development of new equipment and inspection strategies in connection with ultrasonic imaging techniques turns the pulse-echo technique into a powerful tool to solve problems related to concrete materials. These imaging techniques - developed for the inspection of homogenous materials like steel of aluminum - could be adopted to the very low frequencies needed for concrete inspections. T2 - Workshop on the Evaluation of Defects, Repair Criteria & Methods of Repair for Concrete Structures on Nuclear Power Plants CY - Berlin, Germany DA - 2002-04-10 PY - 2002 UR - http://publica.fraunhofer.de/documents/N-15451.html VL - 2 SP - 125 EP - 132 PB - NEA CY - Issy-les-Moulineaux AN - OPUS4-1921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Görner, Wolf A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Roth, M. ED - Röhrs, S. T1 - Auf den Spuren Albrecht Dürers - Zerstörungsfreie Untersuchung von Silberstiftzeichnungen mittels Mikro-PIXE und Synchrotron-induzierter Mikro-RFA T2 - Archäometrie und Denkmalpflege (Jahrestagung ... / AK Archäometrie in der GDCh 2003) T2 - Jahrestagung 2003 im Ethnologischen Museum Berlin-Dahlem CY - Berlin, Deutschland DA - 2003-03-12 PY - 2003 SN - 3-00-014223-1 SN - 0949-4057 SP - 118 EP - 120 CY - [Frankfurt am Main] AN - OPUS4-2356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Langenberg, K. J. A1 - Marklein, R. A1 - Mayer, K. A1 - Krylow, T. A1 - Ampha, P. A1 - Streicher, Doreen A1 - Krause, Martin ED - Pinto, I. M. T1 - Wavefield inversion in nondestructive testing T2 - Electromagnetics in a complex world T2 - Workshop/Minisymposium on "Electromagnetics in a Complex World: Challenges and Perspectives" CY - Benevento, Italy DA - 2003-02-20 PY - 2003 SN - 3-540-20235-8 SN - 0930-8989 N1 - Serientitel: Springer proceedings in physics – Series title: Springer proceedings in physics IS - 96 SP - 1 EP - 10(?) PB - Springer CY - Berlin AN - OPUS4-2357 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Denker, A. A1 - Hahn, Oliver A1 - Kanngießer, B. A1 - Malzer, W. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Röhrs, S. A1 - Reiche, I. A1 - Stege, H. T1 - Chemie der Kunst - Zerstörungsfreie Analyse von Kunst- und Kulturgütern JF - Materialprüfung = Materials testing N2 - Naturwissenschaftliche Informationen, insbesondere die chemische Zusammensetzung der Objekte, können Hinweise auf die Hintergründe der Objektherstellung liefern, die der alleinigen kunsthistorischen Begutachtung verborgen blieben. Es können nicht nur Fragen nach dem Prozess, Zeitpunkt und Ort der Herstellung beantwortet werden. Die chemische Analyse gibt auch Hinweise auf Ereignisse und Veränderungen, die erst nach der Fertigstellung des Objektes erfolgten. So werden Alterungsphänomene oder historische Überarbeitungen und Restaurierungen aufgedeckt, aber auch Konservierungsstrategien zur Erhaltung der Kunstwerke unterstützt. Durch den technologischen Fortschritt im Bereich der röntgenanalytischen Methoden, die berührungsfrei, ohne Probennahme und ohne Schädigung für das Untersuchungsobjekt arbeiten, erschließen sich dem Analytiker erstmalig Möglichkeiten, auch sehr wertvolle und fragile Objekte zerstörungsfrei zu untersuchen. PY - 2003 DO - https://doi.org/10.1515/mt-2003-0003 SN - 0025-5300 VL - 45 IS - 11-12 SP - 485 EP - 503 PB - Carl Hanser Verlag CY - München AN - OPUS4-2745 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Krause, Martin A1 - Kohl, Christoph A1 - Schickert, M. A1 - Kroggel, O. A1 - Müller, W. T1 - Parameters for the Quantitative Assessment of Ulrasonic Imaging for Concrete Elements T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) N2 - Ultrasonic investigation is an established non-destructive testing method for detection of defects and material characterisation. In the last years scanning ultrasonic echo methods were developed especially for the application in civil engineering. The different scanning ultrasonic echo methods are modified with respect to the type of the transducer applied, the number and the arrangement of transducers and the frequency used. Also different algorithms are used to analyse the measured data, for instance SAFT (Synthetic Aperture Focusing Technique) reconstruction. The results are typically presented as B- and C-scans, obtained from raw data or the SAFT reconstructed data. Since 2001 several German research institutes co-operate within the scope of the research initiative Non-destructive Evaluation of Concrete Structures Using Acoustic and Electromagnetic Echo-Methods (FOR 384) supported by the Deutsche Forschungsgemeinschaft (DFG). One of the tasks is to investigate these ultrasonic echo methods for special applications like the detection of cavities in concrete structures or faults in tendon ducts. Concrete test specimens with intentional faults have been manufactured and investigated. Parameters were defined to assess the results more objectively. Currently three parameters -signal/noise-ratio, lateral edge resolution and uniformity- are considered. For the first time results of different working groups on the same imaged objects are compared quantitatively. It should help to get more knowledge about the ultrasonic inspection of typical faults in civil engineering structures. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/p050/p050.htm SN - 3-931381-49-8 SP - 1(?) EP - 12(?) PB - DGZfP CY - Berlin AN - OPUS4-2751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schickert, M. A1 - Krause, Martin A1 - Müller, W. T1 - Ultrasonic Imaging of Concrete Elements Using Reconstruction by Synthetic Aperture Focusing Technique JF - Journal of materials in civil engineering N2 - Ultrasonic reconstruction by the synthetic aperture focusing technique (SAFT) has a great potential to image concrete elements and detect embedded objects. Its algorithm focuses ultrasonic signals received at many aperture points by coherent superposition, yielding a high-resolution image of the region of interest. Using this approach, several problems caused by the strongly inhomogeneous structure of concrete are diminished, where scattering of transmitted pulses leads to disturbing phenomena such as attenuation and structural noise. This contribution is intended to review the work of the writers on the application of SAFT reconstruction to concrete testing. First, consequences of scattering of ultrasonic waves in concrete are qualitatively explained. Then the use of SAFT is discussed in comparison to traditional A-scan and B-scan techniques. Different reconstruction algorithms and implementations are presented for one-, two-, and three-dimensional SAFT. Pulse-echo measurement systems are described, which are able to acquire large sets of data on linear and planar apertures employing single transducer, transducer array, and scanning laser Doppler vibrometer arrangements. To illustrate the application of the SAFT techniques, examples from laboratory and field experiments are described comprising imaging of back walls, tendon ducts containing faults, layers, and reinforcement in concrete elements. KW - Imaging techniques KW - Concrete KW - Acoustic detection PY - 2003 DO - https://doi.org/10.1061/(ASCE)0899-1561(2003)15:3(235) SN - 0899-1561 SN - 1943-5533 IS - May/June SP - 235 EP - 246 PB - American Society of Civil Engineers CY - New York, NY AN - OPUS4-2752 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Martin A1 - Schobbert, Helmut A1 - Hoffmann, Th. T1 - Aktuelle Entwicklung beim Schweiß von Nickelbasiswerkstoffen unter Berücksichtigung des Schutzgaseinflusses auf die Heißrissresistenz T2 - Große Schweißtechnische Tagung T2 - Große Schweißtechnische Tagung CY - Berlin, Germany DA - 2003-09-17 PY - 2003 AN - OPUS4-4017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Martin T1 - Heißrissprüfung für das Lichtbogen und Laserstrahlschweißen T2 - DVS - Bezirksverband Berlin T2 - DVS - Bezirksverband Berlin CY - Berlin, Germany DA - 2003-04-30 PY - 2003 AN - OPUS4-4018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin ED - Cziesielski, E. T1 - Ultraschallechoverfahren an Betonbauteilen T2 - Bauphysik-Kalender 2004 PY - 2004 SN - 3-433-01705-0 SP - 341 EP - 352 PB - Ernst CY - Berlin AN - OPUS4-5481 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rühe, S. A1 - Dilz, K. A1 - Thomas, Hans-Martin A1 - Zösch, A. T1 - Untersuchungen an lasergeschweißten Blechverbindungen mit Wirbelstrom T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2004 T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Wirbelstrom KW - Laserschweißnaht KW - Karosserieteile PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p27/p27.htm SN - 3-931381-55-2 SP - 1(?) EP - 2(?) PB - DGZfP CY - Berlin AN - OPUS4-5487 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas A1 - Töpfer, Antje A1 - Nehls, Irene T1 - Bestimmung von Ochratoxin A in Wein nach Reinigung an Anionenaustausch/Reversed Phase-Material mittels LC-MS/MS T2 - 33. Deutscher Lebensmittelchemikertag T2 - 33. Deutscher Lebensmittelchemikertag CY - Bonn, Germany DA - 2004-09-13 PY - 2004 AN - OPUS4-5474 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas A1 - Töpfer, Antje A1 - Nehls, Irene T1 - Vergleich von Extraktionstechniken zur Bestimmung von Ochratoxin A in Röstkaffee T2 - "Tag der Chemie", Universität Potsdam, Institut für Chemie T2 - "Tag der Chemie", Universität Potsdam, Institut für Chemie CY - Potsdam, Germany DA - 2004-07-07 PY - 2004 AN - OPUS4-5476 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Köhler, B. A1 - Schubert, F. A1 - Algernon, Daniel A1 - Gardei, André A1 - Mielentz, Frank A1 - Krause, Martin ED - Thompson, D. O. T1 - Experimental study of elastic waves in concrete for NDE in civil engineering T2 - Review of progress in quantitative nondestructive evaluation, volume 24 N2 - Laser vibrometric contactless sound field measurements at a concrete test block are presented. Both excitation by an ultrasonic probe and by an impactor were used. The wave modes can be identified by their geometric wave forms and propagation velocities. Additionally, numerical simulation of the experimental situation is used to support this interpretation. Possible applications of the presented technique are discussed. ©2005 American Institute of Physics T2 - 31th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Golden, CO, USA DA - 2004-07-25 KW - Ultraschall KW - Impact-Echo KW - Wellenausbreitung KW - Visualisierung KW - Modellierung PY - 2005 SN - 0-7354-0245-0 DO - https://doi.org/10.1063/1.1916840 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings IS - 760 SP - 1439 EP - 1445 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-5480 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Schulz, Eckhard A1 - Sturm, Heinz T1 - On the use of harmonically modulated lateral force microscopy (HM-LFM) and force modulation microscopy (FMM) for the study of reinforced polymers T2 - 4th International Conference on the Development and Technical Application of Scanning Probe Methods (SXM4) T2 - 4th International Conference on the Development and Technical Application of Scanning Probe Methods (SXM4) CY - Münster, Germany DA - 2000-09-26 PY - 2000 AN - OPUS4-6507 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Harmonically modulated lateral force microscopy (HM-LFM) as a tool for the analysis of heterogeneous polymer systems T2 - Berliner Polymerentage 2000 T2 - Berliner Polymerentage 2000 CY - Berlin, Germany DA - 2000-10-09 PY - 2000 AN - OPUS4-6510 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Schulz, Eckhard A1 - Sturm, Heinz T1 - Reliability of Polymer Materials - the Nanoscopic View on Interphases T2 - Uni San Sebastian T2 - Uni San Sebastian CY - San Sebastián, Spain DA - 2002-08-07 PY - 2002 AN - OPUS4-6533 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mero, M. A1 - Clapp, B. A1 - Jasapara, J.C. A1 - Rudolph, W. A1 - Ristau, D. A1 - Starke, K. A1 - Krüger, Jörg A1 - Martin, Sven A1 - Kautek, Wolfgang T1 - On the damage behavior of dielectric films when illuminated with multiple femtosecond laser pulses JF - Optical engineering N2 - The physical effects reducing the damage threshold of dielectric films when exposed to multiple femtosecond pulses are investigated. The measured temperature increase of a Ta2O5 film scales exponentially with the pulse fluence. A polarized luminescence signal is observed that depends quadratically on the pulse fluence and is attributed to twophoton excitation of self-trapped excitons that form after band-to-band excitation. The damage fluence decreases with increasing pulse number, but is independent of the repetition rate from 1 Hz to 1 kHz at a constant pulse number. The repetition rate dependence of the breakdown threshold is also measured for TiO2 , HfO2, Al2O3, and SiO2 films. A theoretical model is presented that explains these findings. KW - Laser-induced damage KW - Laser materials KW - Ultrafast phenomena KW - Coatings PY - 2005 DO - https://doi.org/10.1117/1.1905343 SN - 0892-354X VL - 44 IS - 5 SP - 051107-1-051107-7 PB - Dekker CY - New York, NY AN - OPUS4-7406 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Breitenbach, Martin A1 - Oberröder, Christa T1 - Die Coulometrie als absolute Möglichkeit für die Zertifizierung von Referenzmaterial T2 - Tag der Chemie am 8. Juni 2005, Freie Universität Berlin T2 - Tag der Chemie am 8. Juni 2005, Freie Universität Berlin CY - Berlin, Germany DA - 2005-06-08 PY - 2005 AN - OPUS4-7456 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schlosser, S. A1 - Radtke, Martin A1 - Pernicka, E. T1 - Vultures hit by beam T2 - BESSY highlights - annual report 2004 PY - 2005 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2004.pdf#page=497 SN - 0179-4159 SP - 497 EP - 499 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-7385 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Armbruster, B. A1 - Eilbracht, H. A1 - Grüger, A. A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Reiche, I. T1 - The Vikings in Berlin: SR-XRF analyses of the Hiddensee gold jewellery T2 - BESSY highlights 2004 PY - 2005 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/infos/bessy/highlights2004.pdf#page=32 SN - 1611-6127 SP - 32 EP - 33 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-7386 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Jörg A1 - Martin, Sven A1 - Mädebach, Heinrich A1 - Urech, L. A1 - Lippert, T. A1 - Wokaun, A. A1 - Kautek, Wolfgang T1 - Femto- and nanosecond laser treatment of doped polymethylmethacrylate JF - Applied surface science N2 - Femto- and nanosecond laser ablation of polymethylmethacrylate (PMMA) and PMMA doped with a linear absorber was investigated in the infrared spectral region. Ablation thresholds were determined and incubation phenomena were identified. The ‘degree’ of incubation was calculated employing a phenomenological model. The influence of the pulse duration on the machining quality of the polymers was examined. The presence of an absorbing chromophore is not a prerequisite for a controllable fs-laser structuring in contrast to the ns-treatment. Surface swelling always accompanied ablation. KW - Laser ablation KW - Laser beam machining KW - Doping thin films KW - Polymers-radiation effects PY - 2005 DO - https://doi.org/10.1016/j.apsusc.2005.01.078 SN - 0169-4332 SN - 1873-5584 VL - 247 SP - 406 EP - 411 PB - North-Holland CY - Amsterdam AN - OPUS4-7470 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Becker, Günther T1 - Aufnahme, Eindringstiefe und quantitative Verteilung eines Chrom-Flour-Arsen-Schutzsalzgemisches in Fichten- und Kiefermasten nach Kesseldruckverfahren JF - Holz als Roh- und Werkstoff N2 - Anlaß und Aufgabe der Untersuchungen — Versuchsausführung: Holzauswahl; Tränkung, Verwiegen; Lagerung der getränkten Maste; Probenentnahme; Bestimmung der Fluorid-Eindringtiefen; Bestimmung des Schutzsalz-Gehaltes und seiner Verteilung; Statistische Auswertungsverfahren — Aufnahme an Schutzsalz-Lösung — Fluorid-Eindringtiefe : Fichte; Kiefer — Mengen-Verteilung von Fluor und Chrom: Fichte; Kiefer — Folgerungen aus den Ergebnissen: Einfluß von Holzart und Holzeigenschaften; Bemerkungen zum Tränkerfolg; Gesichtspunkte für eine Gütekontrolle — Zusammenfassung — Schrifttum. PY - 1965 SN - 0018-3768 VL - 23 IS - 9 SP - 369 EP - 381 PB - Springer CY - Berlin AN - OPUS4-10428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pfender, Max A1 - Martin, Erich A1 - Amedick, Egon A1 - Mundry, Eberhard T1 - Schweißung von dynamisch beanspruchten starkwandigem Stahlguß im Schiffsmaschinenbau JF - Jahrbuch der Schiffbautechnischen Gesellschaft PY - 1964 SN - 0374-1222 VL - 58 SP - 341 EP - 355 PB - Springer CY - Berlin AN - OPUS4-10399 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Erich T1 - Prüfung schwerer Schmiedestücke JF - Stahl und Eisen PY - 1965 SN - 0340-4803 SN - 0340-479x VL - 85 IS - 19 SP - 1173 EP - 1182 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-10400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Meyer, Roswitha T1 - Das Vorkommen von Moderfäule in Holzmasten JF - Holz als Roh- und Werkstoff PY - 1964 SN - 0018-3768 VL - 22 IS - 2 SP - 42 EP - 47 PB - Springer CY - Berlin AN - OPUS4-10344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin A1 - Nofz, Marianne T1 - Alumina coatings on Ni-base superalloy T2 - Junior-DGM-Tag T2 - Junior-DGM-Tag CY - Berlin, Germany DA - 2006-06-07 PY - 2006 AN - OPUS4-12488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Heuchel, M. T1 - Gas Transport Characterisation and Molecular Modelling - Possible Corelations and Methodological Extensions T2 - Workshop Glasübergang T2 - Workshop Glasübergang CY - Berlin, Germany DA - 2003-12-14 PY - 2003 AN - OPUS4-4197 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Krause, Ulrich A1 - Schmidt, Martin T1 - Einflussparameter auf den Ablauf von druckentlasteten Gasexplosionen T2 - Tagungsband der 6. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 6. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2002-11-07 PY - 2002 IS - Abschnitt P04 SP - C01-1-C01-11 PB - GVC CY - Düsseldorf AN - OPUS4-5071 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Ralf A1 - Gaber, Martin A1 - Gottschling, Peter T1 - Water release and crystallisation of glass powders JF - European journal of glass science and technology / B T2 - Physics and Chemistry of Glasses / VII Symposium on Crystallization in Glasses in Liquids CY - Sheffield, England, UK DA - 2004-07-06 PY - 2004 SN - 1753-3562 SN - 0017-1050 SN - 0031-9090 SN - 1750-6697 VL - 45 IS - 2 SP - 1 EP - 5 PB - Society of Glass Technology CY - Sheffield AN - OPUS4-6237 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Helms, Rolf A1 - Kühn, Hans-Joachim A1 - Martin, Erich T1 - Einfluß des Feuerverzinkens auf die mechanischen Eigenschaften von Baustahl und das Sprödbruchverhalten gestanzter Teile JF - Archiv für das Eisenhüttenwesen PY - 1974 SN - 0003-8962 VL - 45 IS - 2 SP - 117 EP - 125 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-7952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hattwig, Martin T1 - Verfahren zur Bestimmung der Explosionskennzahlen T2 - Vorträge zum Kolloquium Druckentlastung von Staubexplosionen T2 - Kolloquium Druckentlastung von Staubexplosionen CY - Düsseldorf, Deutschland DA - 1975-06-05 PY - 1975 SP - 91 EP - 101 AN - OPUS4-8428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Theden, Gerda A1 - Gersonde, Martin T1 - Streichen und Sprühen von Holzschutzmitteln JF - Holz-Zentralblatt PY - 1955 SN - 0018-3792 VL - 81 IS - 2 SP - 332 EP - 333 PB - DRW-Verl. Weinbrenner CY - Leinfelden-Echterdingen AN - OPUS4-9778 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Römer, A. A1 - Völkel, W. T1 - Untersuchungen zur zerstörungsfreien Bestimmung des Hohlraumgehaltes von Asphaltschichten T2 - Fachtagung Bauwerksdiagnose 2006 - Praktische Anwendungen Zerstörungsfreier Prüfungen T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Asphalt KW - Hohlraumgehalt KW - Zerstörungsfreie Prüfung KW - Ultraschallverfahren KW - Ultraschall-Rückstreuung KW - Radarverfahren PY - 2006 SN - 3-931381-71-4 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-12116 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Chung, Jae Un A1 - Stark, Wolfgang A1 - Inaki, Mondragon T1 - Concentration and Stiffness Mapping of Epoxy Interphases. T2 - "Polydays 2004", Universität Potsdam, Campus "Am Neuen Palais" veranstaltet vom Berlin-Brandenburgischen Verband für Polymerforschung (BVP) T2 - "Polydays 2004", Universität Potsdam, Campus "Am Neuen Palais" veranstaltet vom Berlin-Brandenburgischen Verband für Polymerforschung (BVP) CY - Potsdam, Germany DA - 2004-10-04 PY - 2004 AN - OPUS4-4441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Stark, Wolfgang T1 - Concentration gradients at the thermoset/thermoplastic interface of amine-cured epoxy/poly(vinylpyrrolidone) T2 - "Polydays 2004", Universität Potsdam, Campus "Am Neuen Palais" veranstaltet vom Berlin-Brandenburgischen Verband für Polymerforschung (BVP) Poster T15 (Poster Session 05.10.2004) T2 - "Polydays 2004", Universität Potsdam, Campus "Am Neuen Palais" veranstaltet vom Berlin-Brandenburgischen Verband für Polymerforschung (BVP) Poster T15 (Poster Session 05.10.2004) CY - Potsdam, Germany DA - 2004-10-04 PY - 2004 AN - OPUS4-4438 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Sven A1 - Hertwig, Andreas A1 - Krüger, Jörg A1 - Kautek, Wolfgang T1 - Spot-size dependence of femtosecond laser ablation of dielectrics T2 - European Conference on Lasers and Electro-Optics (CLEO-EUROPE 2003) T2 - European Conference on Lasers and Electro-Optics (CLEO-EUROPE 2003) CY - Munich, Germany DA - 2003-06-27 PY - 2003 AN - OPUS4-4362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf T1 - Bestimmung von Diffusionskoeffizienten mit der VHE-Pulvermethode T2 - Workshop Wasser im Glas T2 - Workshop Wasser im Glas CY - Berlin, Germany DA - 2004-12-08 PY - 2004 AN - OPUS4-5732 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Görner, Wolf A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Roth, M. ED - Marabelli, M. ED - Tabaso, M. T1 - Spatially resolved SR-XRF analyses of complex drawings of the Holbein family T2 - Proceedings of the 8th International Conference on "Non-Destructive Investigations and Microanalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage" T2 - 8th International Conference on "Non-Destructive Investigations and Microanalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage" CY - Lecce, Italy DA - 2005-05-15 KW - X-ray spectrometry KW - XRF KW - Röntgenfluoreszenzanalyse KW - RFA KW - Silverpoint drawing KW - Silberstiftzeichnung PY - 2005 SP - 7 pages PB - Italian Society of Non Destructive Testing CY - Lecce AN - OPUS4-7677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - A study on the influence of liquid water and water vapour on the self-ignition of lignite coal-experiments and numerical simulations JF - Journal of loss prevention in the process industries N2 - The current paper presents experimental investigations as well as numerical simulations on the influence of water and humidity on the self-ignition of combustible bulk materials. It is well known, that bulk materials may undergo self-ignition if stored under specific conditions. In some cases, large amounts of these materials are exposed to a humid surrounding, e.g. dried coal in a moist atmosphere. Due to the effects of condensation and adsorption of water, additional heat is generated and transported into the bulk material. If the pile is stored slightly below its self-ignition temperature, the bulk material can become supercritical and an ignition occurs. Experiments were carried out for German lignite coal sampled in two different particle size fractions. They showed, that subcritical deposits turned to supercritical behaviour if the relative humidity in the surrounding was suddenly increased or water was poured on the surface of the sample. Besides the experiments, a numerical model was established to describe the effects of self-heating until ignition of the deposit, including the transportation of moisture. Simulations with this model led to satisfying results when compared to the experiments. KW - Self-ignition KW - Combustion KW - Moisture transfer KW - Numeric modelling KW - Lignite coal KW - Selbstentzündung KW - Feuchtigkeitstransport KW - Simulationen PY - 2005 DO - https://doi.org/10.1016/j.jlp.2005.03.006 SN - 0950-4230 SN - 1873-3352 VL - 18 IS - 3 SP - 167 EP - 177 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-7693 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Selbstentzündung von Stäuben und Schüttgütern bei vermindertem Sauerstoffgehalt T2 - DECHEMA-Jahrestagung T2 - DECHEMA-Jahrestagung CY - Wiesbaden, Germany DA - 2002-06-11 PY - 2002 AN - OPUS4-7684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eichelbaum, M. A1 - Rademann, K. A1 - Müller, Ralf A1 - Radtke, Martin A1 - Görner, Wolf T1 - Zur Chemie des Goldes in Silicatgläsern: Untersuchungen zum nicht-thermisch aktivierten Wachstum von Goldclustern JF - Angewandte Chemie KW - Glas KW - Goldcluster KW - Nanophotonik PY - 2005 DO - https://doi.org/10.1002/ange.200502174 SN - 0044-8249 SN - 0932-2140 SN - 1521-3757 VL - 117 IS - 48 SP - 8118 EP - 8122 PB - Wiley-VCH CY - Weinheim AN - OPUS4-7691 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Gersonde, Martin T1 - Preservation of Wood-based Panels against Fungi and Insects and Testing its Efficiency JF - Holz-Forschung, Holz-Verwertung T2 - World Consultation on Wood-based Panels CY - New Delhi, India DA - 1975-02-06 PY - 1976 SN - 0018-3849 VL - 28 IS - 1 SP - 12 EP - 15 PB - Österreich. Agrarverl. CY - Wien AN - OPUS4-8469 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Kerner-Gang, Waltraut T1 - A review of information available for development of a method for testing wood preservatives with soft rot fungi JF - International biodeterioration bulletin PY - 1976 SN - 0020-6164 VL - 12 SP - 5 EP - 13 CY - Birmingham AN - OPUS4-8481 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Erich A1 - Helms, Rolf T1 - Verarbeitbarkeit und Sprödbruchempfindlichkeit; einige vergleichende Untersuchungen an Blechen aus allgemeinem Baustahl St 37 (DIN 17100) JF - Mitteilungen der Deutschen Forschungsgesellschaft für Blechverarbeitung und Oberflächenbehandlung PY - 1967 SN - 0720-0951 VL - 18 SP - 237 EP - 253 CY - Düsseldorf AN - OPUS4-10561 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Erprobung der Wirkungsdauer von Schutzmitteln für Bauholz im Schwammkeller-Versuch JF - Material und Organismen = Materials and organisms = Matériaux et organismes PY - 1967 SN - 0025-5270 VL - 2 IS - 4 SP - 249 EP - 261 PB - Duncker & Humblot CY - Berlin AN - OPUS4-10596 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hölck, Ole A1 - Heuchel, M. A1 - Siegert, M. T1 - Investigation of swollen polymer/gas-systems: atomistic packing models based on experimental properties T2 - Frühjahrstagung der Deutschen Physikalischen Ges. / AKF Condensed Matter T2 - Frühjahrstagung der Deutschen Physikalischen Ges. / AKF Condensed Matter CY - Dresden, Germany DA - 2006-03-26 PY - 2006 AN - OPUS4-11316 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Hillemeier, B. A1 - Krause, Martin ED - Bröker, F. T1 - Defect localisation in wood with low frequency ultrasonic echo technique T2 - Proceedings of the 14th International Symposium on Nondestructive Testing of Wood T2 - 14th International Symposium on Nondestructive Testing of Wood CY - Eberswalde, Germany DA - 2005-05-02 PY - 2005 SN - 3-8322-3949-9 SP - 331 EP - 336 PB - Shaker CY - Aachen AN - OPUS4-11307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Lutz, J. A1 - Hillemeier, B. A1 - Rieck, C. T1 - Niederfrequente Ultraschall-Echo-Verfahren und Bohrwiderstandsmessung zur Untersuchung von Holzbauteilen T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2005 T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschallecho-Experimente an Probekörpern KW - Ultraschall-Echo KW - Fäulnis KW - Bauwesen PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-11960 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Hillger, w. A1 - Bühling, L. A1 - Ilse, D. A1 - Hillemeier, B. A1 - Rieck, C. T1 - Luftultraschall und Ultraschall-Echo-Technik an Holz T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2005 T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschallecho-Experimente an Probekörpern KW - Ultraschall-Echo KW - Fäulnis KW - Bauwesen KW - Luftultraschall PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 15(?) PB - DGZfP CY - Berlin AN - OPUS4-11961 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Riesemeier, Heinrich A1 - Ecker, Klaus A1 - Görner, Wolf A1 - Müller, Bernd R. A1 - Radtke, Martin A1 - Krumrey, M. T1 - Layout and first XRF Applications of the BAMline at BESSY II+ JF - X-ray spectrometry N2 - The first hard x-ray beamline at BESSY II has been installed by BAM and PTB at a superconducting 7 T wavelength shifter. The main optical elements of the beamline are a double-multilayer monochromator and a double-crystal monochromator. Depending on the application, the two devices are used separately or in-line. The main applications of the monochromatic radiation with photon energies up to 60 keV are x-ray fluorescence analysis, micro computed tomography, x-ray topography, detector calibration and reflectometry. Calculable undispersed radiation up to 200 keV is available for radiometric applications. KW - BAMline KW - XRF PY - 2005 DO - https://doi.org/10.1002/xrs.750 SN - 0049-8246 VL - 34 IS - 2 SP - 160 EP - 163 PB - Wiley CY - Chichester AN - OPUS4-11929 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hertwig, Andreas A1 - Martin, Sven A1 - Krüger, Jörg A1 - Spielmann, C. A1 - Lenner, M. A1 - Kautek, Wolfgang ED - Dausinger, F. ED - Lichtner, F. ED - Lubatschowski, H. T1 - Primary hazards and reliability of protective materials T2 - Femtosecond technology for technical and medical applications N2 - Femtosecond laser pulses are close to industrial use. The advantages of ultrashort laser pulses for micromachining applications especially in the case of dielectric and biological samples down to pulse durations of 5 fs have been established. The current international standards of laser safety are primarily concerned with CW and pulsed lasers down to the nanosecond range. Therefore, human tissue and laser-protection equipment was investigated with respect to its resistance and protection performance for femtosecond laser illumination down to 30 fs. This included filter glasses for laser protection eyewear, polymer and textile materials used in curtains and guards. Bulk absorber filters can provide enough protection against laser radiation, give a sufficiently broad absorption spectrum. Materials are damaged more easily by femtosecond laser radiation. The need for sufficient spectral broadness as well as the different damage thresholds have to be included in international laser safety standards. This work should trigger the development of novel eye-protection devices that are lighter and ergonomically more acceptable than present commercial models. KW - Lasersicherheit KW - Kurzpulslaser KW - Femtosekunden KW - Lasertechnik KW - Materialbearbeitung PY - 2004 SN - 3-540-20114-9 DO - https://doi.org/10.1007/b96440 SN - 0303-4216 N1 - Serientitel: Topics in applied physics – Series title: Topics in applied physics IS - 96 SP - 287 EP - 307 PB - Springer CY - Berlin AN - OPUS4-4661 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Breitenbach, Martin A1 - Oberröder, Christa T1 - Die Coulometrie als absolute Methode für die Zertifizierung von Referenzmaterial T2 - Aushang im Zweiggelände Adlershof der BAM, Haus 8.15, Flur, 6.Etage T2 - Aushang im Zweiggelände Adlershof der BAM, Haus 8.15, Flur, 6.Etage CY - Berlin, Germany DA - 2004-09-24 PY - 2004 AN - OPUS4-4623 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin A1 - Friemel, W. T1 - Die Azetonverluste aus Dissousgasflaschen bei der Gasentnahme in verschiedenen Entnahmestellen JF - Die Berufsgenossenschaft PY - 1960 SN - 0340-9481 VL - 12 IS - 8 SP - 301 EP - 304 PB - Schmidt CY - Berlin AN - OPUS4-7874 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin A1 - Friemel, W. T1 - Die Entstehung und Fortpflanzung von detonationsartigen Stoßwellen des reinen Azetylens in Rohren JF - Arbeitsschutz PY - 1960 SN - 0003-7788 IS - 11 SP - 276 EP - 280 PB - Kohlhammer CY - Stuttgart AN - OPUS4-7875 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Gersonde, Martin T1 - Ergebnisse vergleichender Untersuchungen über den Nachschutz von Holzmasten mit Salzen JF - Elektrizitätswirtschaft PY - 1960 SN - 0013-5496 VL - 59 IS - 24 SP - 854 EP - 864 PB - VWEW-Energieverl. CY - Frankfurt, M. AN - OPUS4-7863 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Windkanal für zeitraffende Prüfung der Verdunstbarkeit von Holzschutzmitteln JF - Materialprüfung = Materials testing PY - 1960 SN - 0025-5300 VL - 2 IS - 8 SP - 307 EP - 308 PB - Carl Hanser Verlag CY - München AN - OPUS4-7868 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Becker, Günther A1 - Gersonde, Martin T1 - Preservation of Wood-Based Panels against Fungi and Insects and Testing its Efficiency T2 - World Consultation on Wood Based Panels T2 - World Consultation on Wood Based Panels (background paper) CY - New Delhi, India DA - 1975-02-06 PY - 1975 IS - 114 SP - i-iii, 1-11 CY - New Delhi, India AN - OPUS4-8271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Deppe, Hans-Joachim A1 - Gersonde, Martin T1 - Zur Situation des chemischen Schutzes von Holzwerkstoffen gegen Fäulnis JF - Holz als Roh- und Werkstoff PY - 1975 SN - 0018-3768 VL - 33 IS - 3 SP - 124 EP - 128 PB - Springer CY - Berlin AN - OPUS4-8280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hattwig, Martin T1 - Stabilität industriell angewendeter einfacher Chlorkohlenwasserstoffe JF - Die Berufsgenossenschaft PY - 1975 SN - 0340-9481 VL - 27 SP - 126 EP - 127 PB - Schmidt CY - Berlin AN - OPUS4-8242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hattwig, Martin T1 - Ein vereinfachtes Verfahren zur Beurteilung der Stabilität sonderstabilisierter Chlorkohlenwasserstoffe in Gegenwart von Aluminium JF - Die Berufsgenossenschaft PY - 1975 SN - 0340-9481 VL - 27 SP - 127 EP - 128 PB - Schmidt CY - Berlin AN - OPUS4-8243 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin T1 - Versuche zur Frage, ob das Ventil einer Azetylenflasche nach Eintreten eines Azetylenzerfalls geöffnet oder geschlossen werden soll JF - Arbeitsschutz PY - 1957 SN - 0003-7788 IS - 6 SP - 114 EP - 115 PB - Kohlhammer CY - Stuttgart AN - OPUS4-9941 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin A1 - Voigtsberger, Paul T1 - Mechanisch erzeugte Funken als Zündquelle für Azetylen / Luft-Gemische JF - Arbeitsschutz PY - 1957 SN - 0003-7788 IS - 11 SP - 214 EP - 220 PB - Kohlhammer CY - Stuttgart AN - OPUS4-9942 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Einfluss von Feuchte und Konvektionsströmung auf das Selbstentzündungsverhalten von Feststoffschüttungen JF - Chemie - Ingenieur - Technik KW - Selbstentzündung KW - Konvektion KW - Feuchte PY - 2005 DO - https://doi.org/10.1002/cite.200590078 SN - 0009-286X SN - 1522-2640 VL - 77 IS - 8 SP - 1141 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-10847 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Breitenbach, Martin T1 - Ergebnisse und Trends in der Elektrochemie in der AG I.12 T2 - Seminar der BAM-Abteilung I T2 - Seminar der BAM-Abteilung I CY - Berlin, Germany DA - 2006-01-30 PY - 2006 AN - OPUS4-11689 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Görner, Wolf A1 - Matschat, Ralf A1 - Riesemeier, Heinrich A1 - Eichelbaum, M. A1 - Rademann, K. T1 - XANES Measurements On Glass Samples at the BAMline T2 - PRORA-Fachtagung "Prozessnahe Röntgenanalytik" T2 - PRORA-Fachtagung "Prozessnahe Röntgenanalytik" CY - Berlin, Germany DA - 2005-11-24 PY - 2005 AN - OPUS4-11651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Scheer, C. T1 - Zerstörungsfreie Integritätsprüfung von Holz mit dem Ultraschallecho-Verfahren T2 - Forschungskolloquium "Holzbau Forschung + Praxis" T2 - Forschungskolloquium "Holzbau Forschung + Praxis" CY - Stuttgart, Deutschland DA - 2006-02-23 PY - 2006 SP - 33 EP - 40 PB - Technische Universität Stuttgart CY - Stuttgart AN - OPUS4-12242 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Heckel, Thomas A1 - Hanspach, G. T1 - Verbesserung der Prüfaussage bei der Schienenprüfung durch Verknüpfung von Ultraschall und Wirbelstrom T2 - 4. Fachtagung ZfP im Eisenbahnwesen N2 - Vor einigen Jahren wurden zwei Ultraschall-Schienenprüfzüge mit einer zusätzlichen Wirbelstromprüftechnik nachgerüstet. In jüngster Zeit wurde ein neuer Schienenprüfzug fertig gestellt, der von vornherein für die Verwendung beider Prüftechniken entwickelt wurde. Die Wirbelstromprüftechnik ist speziell auf die Erkennung und Bewertung von Rollkontaktermüdungsschäden ausgerichtet, während die Ultraschallprüftechnik das für den Wirbelstrom unerreichbare Schienenvolumen prüft. Aus den Erfahrungen im Prüfbetrieb kann abgeleitet werden, dass die Kombination der Anzeigen beider Prüftechniken entscheidende Verbesserungen für die Schienenprüfung bringt. Beispielsweise können Fehler der Gruppe 2 durch die zusätzliche Anzeige von Head Checking mit Wirbelstrom sofort mit dem Zusatz "in besonderer Lage" versehen werden. Sie sind nach dem Regelwerk der DB damit der Fehlergruppe 1 gleichzustellen. Aber auch andere, in der Vergangenheit problematische Fälle, wie die Entscheidung, ob eine Laschenkammer mit Schweißung oder Schienenstoß vorhanden ist, lassen sich durch die zusätzlich verfügbaren Informationen der Wirbelstromsignale zuverlässig entscheiden. Beispiele anhand von realen Prüfergebnissen werden gezeigt. T2 - 4. Fachtagung ZfP im Eisenbahnwesen CY - Wittenberge, Germany DA - 2006-03-21 PY - 2006 AN - OPUS4-12248 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wendrich, Astrid A1 - Trela, Christiane A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Milmann, Boris ED - Mazal, P. T1 - Application of ultrasonic and radar tomography for the investigation of the internal structure of masonry T2 - NDT in progress : IIIrd International Workshop of NDT Experts, October 10 - 12, 2005, Prague, Czech Republic, Proceedings T2 - 3rd International Workshop of NDT Experts CY - Prague, Czech Republic DA - 2005-10-10 KW - Masonry KW - Tomography KW - Ultrasonic KW - Radar KW - Non-destructive testing PY - 2005 SN - 80-2142996-8 SP - 299 EP - 313 PB - Univ. of Technology CY - Brno AN - OPUS4-12273 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - König, S. A1 - Diersch, R. A1 - Lührmann, A. A1 - Müller, Karsten A1 - Neumann, Martin A1 - Quercetti, Thomas A1 - Droste, Bernhard T1 - Full-Scale Drop Testing of the CONSTOR®, V/TC Package Program, and Preliminary Results JF - Journal of nuclear materials management KW - Drop test KW - Package KW - Spent fuel cask KW - Transport PY - 2005 SN - 0893-6188 VL - 33 IS - 3 SP - 4 EP - 10 PB - Institute of Nuclear Materials Management CY - Northbrook, Ill. AN - OPUS4-12269 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gräfe, Boris A1 - Krause, Martin T1 - Basic investigation with air-coupled ultrasonic echo for concrete elements T2 - NDE Conference on Civil Engineering T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Air-coupled ultrasound KW - Ultrasonic echo KW - Concrete PY - 2006 SN - 1-57117-148-7 SP - 480 EP - 487 PB - ASTM CY - St. Louis AN - OPUS4-13762 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Hanspach, G. T1 - Schienenprüfzüge mit Ultraschall- und Wirbelstromverfahren: Was bringt die kombinierte Auswertung? T2 - DGZfP, Arbeitskreis Berlin, BAM T2 - DGZfP, Arbeitskreis Berlin, BAM CY - Berlin, Germany DA - 2006-10-17 PY - 2006 AN - OPUS4-13788 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Streicher, Doreen A1 - Wiggenhauser, Herbert A1 - Haardt, P. A1 - Holst, R. ED - Alampalli, S. T1 - Non-destructive Testing of a Post tensioned Concrete Bridge Applying an Automated Measuring System T2 - Structural materials technology VI T2 - 6th NDT Conference: Structural Materials Technology CY - Buffalo, NY, USA DA - 2004-09-14 KW - Ultrasonic-echo KW - Impact-echo KW - Impulse radar KW - Tendon ducts KW - Automated measuring KW - Imaging PY - 2004 SN - 1-571-17150-9 VL - 6 SP - 488 EP - 495 PB - American Society for Nondestructive Testing CY - Columbus, Ohio AN - OPUS4-5229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Martin T1 - Influence of the Weld Pool Geometry on Solidification Crack Formation T2 - Hot Cracking Phenomena in Welds T2 - Hot Cracking Phenomena in Welds CY - Berlin, Germany DA - 2004-03-04 PY - 2004 AN - OPUS4-5236 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schröder, Volkmar A1 - Kluge, Martin A1 - Becker, F. T1 - Explosion Limits of Radiolysis Gas/Steam Mixtures JF - Chemical engineering & technology KW - Nuclear Power Plant KW - Gas Explosion KW - Explosion Limits KW - Radiolysis Gas KW - Explosion Protection PY - 2005 DO - https://doi.org/10.1002/ceat.200500033 SN - 0930-7516 SN - 1521-4125 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 28 IS - 6 SP - 668 EP - 672 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-7571 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hattwig, Martin T1 - Die VDI-Richtlinie 3673 "Druckentlastung von Staubexplosionen" und besondere Probleme bei ihrer praktischen Anwendung T2 - Sichere Handhabung brennbarer Stäube 1977 T2 - Kolloquium Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 1977-10-12 PY - 1978 SN - 3-18-090304-X SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 304 SP - 117 EP - 126 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-8893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dengel, Jörg A1 - Wendler, Reinhold A1 - Denzer, Wolfgang A1 - Buchholz, Joachim A1 - Kluge, Martin A1 - Steinbach, J. A1 - Plewinsky, Bodo A1 - Hieronymus, Hartmut T1 - Explosions Near the Surface of Organic Liquids JF - Process safety and environmental protection KW - Heterogeneous explosions KW - Detonation KW - Deflagration KW - Explosion ranges PY - 2005 SN - 0957-5820 SN - 1744-3598 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 83 IS - B5 SP - 452 EP - 458 PB - Elsevier CY - Amsterdam AN - OPUS4-11176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Ulrich A1 - Schmidt, Martin A1 - Lohrer, Christian T1 - Computations on the coupled heat and mass transfer during fires in bulk materials, coal deposits and waste dumps T2 - Tagungsband der 1. FEMLAB Konferenz T2 - I. FEMLAB Konferenz CY - Frankfurt am Main, Deutschland DA - 2005-11-02 PY - 2005 SP - 74 EP - 79 PB - FEMLAB CY - Göttingen AN - OPUS4-11189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hao, Ning A1 - Schönhals, Andreas T1 - Gas transport and molecular mobility in polymer/POSS nanocomposites T2 - Euromembrane 2006 T2 - Euromembrane 2006 CY - Taormina, Italy DA - 2006-09-24 PY - 2006 AN - OPUS4-11214 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Radtke, Martin A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Riesemeier, Heinrich A1 - Bevers, H. T1 - Spatially resolved synchrotron radiation induced X-ray fluorescence analyses of rare Rembrandt silverpoint drawings JF - Applied physics A N2 - New analyses of a series of very rare silverpoint drawings that were executed by Rembrandt Harmensz. van Rijn (1606–1669) which are kept today in the Kupferstichkabinett (Museum of Prints and Drawings) of the State Museums of Berlin are reported here. Analysis of these drawings requires particular attention because the study has to be fully non-destructive and extremely sensitive. The metal alloy on the paper does not exceed some hundreds of µg/cm². Therefore, synchrotron radiation induced X-ray fluorescence (SR-XRF) is – together with external micro-proton-induced X-ray emission – the only well-suited method for the analyses of metalpoint drawings. In some primary work, about 25 German and Flemish metalpoint drawings were investigated using spatially resolved SR-XRF analysis at the BAMline at BESSY. This study enlarges the existing French–German database of metalpoint drawings dating from the 15th and 16th centuries, as these Rembrandt drawings originate from the 17th century where this graphical technique was even rarer and already obsolete. It also illustrates how SR-XRF analysis can reinforce art historical assumptions on the dating of drawings and their connection. KW - X-ray spectrometry KW - XRF KW - Röntgenfluoreszenzanalyse KW - RFA KW - Silverpoint drawing KW - Silberstiftzeichnung PY - 2006 DO - https://doi.org/10.1007/s00339-006-3505-4 SN - 0947-8396 VL - 83 IS - 2 SP - 169 EP - 173 PB - Springer CY - Berlin AN - OPUS4-12532 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin A1 - Nofz, Marianne T1 - Ceramic bond coats T2 - JuniorEuroMat T2 - JuniorEuroMat CY - Lausanne, Switzerland DA - 2006-09-04 PY - 2006 AN - OPUS4-13727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hölck, Ole A1 - Böhning, Martin A1 - Heuchel, M. A1 - Siegert, M.R. T1 - Gas-induced structural changes in polymeric membrane materials combining experiment, phenomenological models and simulation JF - Desalination KW - Polymer KW - Gas transport KW - Dilation KW - Plasticization KW - Free volume molecular modelling PY - 2006 DO - https://doi.org/10.1016/j.desal.2006.03.283 SN - 0011-9164 VL - 200 IS - 1-3 SP - 166 EP - 168 PB - Elsevier CY - Amsterdam AN - OPUS4-13730 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Hao, Ning A1 - Schönhals, Andreas T1 - Gas transport and molecular mobility in polymer/POSS nanocomposites JF - Desalination PY - 2006 DO - https://doi.org/10.1016/j.desal.2006.03.127 SN - 0011-9164 VL - 200 IS - 1-3 SP - 142 EP - 143 PB - Elsevier CY - Amsterdam AN - OPUS4-13707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heuchel, M. A1 - Böhning, Martin A1 - Hölck, Ole A1 - Siegert, M.R. A1 - Hofmann, D. T1 - Atomistic packing models for experimentally investigated swelling states induced by CO2 in glassy polymers JF - Desalination KW - Glassy polymers KW - Sorption KW - Swelling KW - Molecular Modelling PY - 2006 DO - https://doi.org/10.1016/j.desal.2006.03.100 SN - 0011-9164 VL - 199 IS - 1-3 SP - 443 EP - 444 PB - Elsevier CY - Amsterdam AN - OPUS4-13708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Gräfe, Boris T1 - Basic investigation with air-coupled ultrasonic echo for concrete elements T2 - NDE Conference on Civil Engineering 2006 T2 - NDE Conference on Civil Engineering 2006 CY - St. Louis, MO, USA DA - 2006-08-14 PY - 2006 AN - OPUS4-13748 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Eltanany, Gehan A1 - Schulz, Eckhard T1 - Concentration gradients at thermoset-thermoplastic interfaces - the case of epoxypoly(vinylpyrrolidone) T2 - 7th European Adhesion Conference "EURADH2004", veranstaltet von der DECHEMA T2 - 7th European Adhesion Conference "EURADH2004", veranstaltet von der DECHEMA CY - Freiburg, Germany DA - 2004-09-06 PY - 2004 AN - OPUS4-4156 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Eltanany, Gehan A1 - Chung, Jae Un A1 - Schulz, Eckhard A1 - Sturm, Heinz T1 - Mapping Epoxy Interphases T2 - 7th European Adhesion Conference "EURADH2004", veranstaltet von der DECHEMA T2 - 7th European Adhesion Conference "EURADH2004", veranstaltet von der DECHEMA CY - Freiburg, Germany DA - 2004-09-06 PY - 2004 AN - OPUS4-4158 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Görner, Wolf A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich T1 - Traces of Albrecht Dürer: Non-destructive analyses of Renaissance silverpoint drawings T2 - Analytical applications of nuclear techniques KW - Nuclear industry KW - Nuclear medicine PY - 2004 SN - 92-0-114703-1 SN - 0074-1876 IS - 1181 SP - 138 EP - 142 PB - IAEA CY - Vienna AN - OPUS4-5548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Schröder, Volkmar T1 - Inertisierung von Wasserstoff-Sauerstoff-Wasserdampf-Gemischen T2 - DECHEMA-Veranstaltung "Sicherheitstechnische Kenngrößen" T2 - DECHEMA-Veranstaltung "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2004-05-10 PY - 2004 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-5510 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wolf, Martin A1 - Böllinghaus, Thomas A1 - Schobbert, Helmut ED - Böllinghaus, T. ED - Herold, H. T1 - Influence of the Weld Pool Geometry on Solidification Crack Formation T2 - Hot cracking phenomena in welds N2 - Numerous externally loaded as well as self-restraint hot cracking test procedures have been developed over the years to evaluate soldidification crack phenomena. But the interpretation and the subsequent transfer of test results towards component weldments has still to be regarded as a decisive challenge. Some progress has been achieved by hypothesizing crack / no crack criteria referring to uniform and uniaxial loading of the solidification front during welding. But, as the present results show, solidification cracking significantly depends on the geometry of the solidification front, which has so far not been considered in the respective criteria. In this contribution, the position of solidification cracks is correlated with the positiondependent strain rates along the solidification front and with the positiondependent curvature of the weld pool. Especially at positions of high curvature, an increased rate of shrinkage can be predicted on the basis of a geometrical Rate of Feeding (ROF) Rate of Shrinkage (ROS) model, corresponding to the measured positions of the solidification cracks. The assumption of position-dependent strain and strain rates along the solidification front during Varestraint-Testing has been confirmed by means of numerical simulations. T2 - International Workshop "Hot Cracking Phenomena in Welds" CY - Berlin, Germany DA - 2004-03-04 PY - 2005 SN - 3-540-22332-0 DO - https://doi.org/10.1007/b139103 SP - 245 EP - 268 PB - Springer CY - Berlin AN - OPUS4-7275 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schobbert, Helmut A1 - Böllinghaus, Thomas A1 - Wolf, Martin ED - David, S. A. T1 - Hot Cracking Resistance of Laser and Hybrid Welded Austenitic Stainless Steels T2 - Trends in welding research - Proceedings of the 6th international conference T2 - 6th International Conference on Trends in Welding Research (TWR) CY - Pine Mountain, GA, USA DA - 2002-04-15 KW - Heißrisse KW - Nichtrostende Stähle PY - 2003 SN - 0-87170-780-2 SP - 76 EP - 81 PB - ASM international CY - Materials Park, Ohio AN - OPUS4-7283 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Petersohn, Dieter A1 - Neumann, Martin T1 - Untersuchungen zur Kathodolumineszenz von Leuchtstoffen und bedampften Objekten. Vermessung der spektralen Transmission dünner Schichten JF - Beiträge zur elektronenmikroskopischen Direktabbildung von Oberflächen T2 - 10. Kolloquium des Arbeitskreises für Elektronenmikroskopische Direktabbildung und Analyse von Oberflächen (EDO) CY - Münster, Deutschland DA - 1977-09-04 PY - 1979 SN - 0340-3815 VL - 10 SP - 639 EP - 646 PB - Remy CY - Münster, Westf. AN - OPUS4-9157 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Taffe, Alexander A1 - Gardei, André A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert T1 - Automatisierung zerstörungsfreier Prüfverfahren für das Bauwesen JF - Materialprüfung = Materials testing N2 - In der BAM wurde als Gemeinschaftsvorhaben der Fachgruppe „Zerstörungsfreie Schadensdiagnose und Umweltmessverfahren“ ein rechnergesteuerter Messabtaster für Bauwerksteile (Baustellenscanner) entwickelt. Es handelt sich um ein auf Schienen verfahrbares modulares System mit einem multifunktionalen Messkopf für mehrere zerstörungsfreie Prüfverfahren. Mit dem Baustellenscanner können Objekte wie Brücken oder Fundamentplatten schneller und genauer als bisher bei gleichzeitig reduziertem Personalaufwand untersucht werden. PY - 2004 DO - https://doi.org/10.1515/mt-2004-0397 SN - 0025-5300 VL - 46 IS - 7-8 SP - 397 EP - 403 PB - Carl Hanser Verlag CY - München AN - OPUS4-4401 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Ralf A1 - Gaber, Martin A1 - Gottschling, Peter T1 - Volatile concentration and diffusivity determined by vacuum hot extraction T2 - Proceedings / XX International Congress on Glass, T2 - XX. International Congress on Glass CY - Kyoto, Japan DA - 2004-09-26 KW - Silicate glass KW - Water KW - Hydrogen KW - Degassing KW - Diffusion coefficient PY - 2004 SP - 6 pages PB - Ceramic Society of Japan CY - Tokio AN - OPUS4-6951 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gottschling, Peter A1 - Müller, Ralf A1 - Gaber, Martin T1 - Finite-Differenzen-Berechnung der Abgabe von Gasen aus Glaspulvern T2 - Kurzreferate / 78. Glastechnische Tagung T2 - 78. Glastechnische Tagung CY - Nürnberg, Deutschland DA - 2004-06-07 KW - Finite Differenzen KW - Diffusion KW - Pulvermethode PY - 2004 SP - 25 EP - 29 PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-6952 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wondraczek, L. A1 - Reinsch, Stefan A1 - Gaber, Martin A1 - Deubener, J. A1 - Müller, Ralf A1 - Komatsu, T. T1 - Nano-crystalline germanate glass-ceramics T2 - Kurzreferate / 78. Glastechnische Tagung T2 - 78. Glastechnische Tagung CY - Nürnberg, Deutschland DA - 2004-06-07 PY - 2004 SP - 37 EP - 40 PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-6953 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Gütesicherung imprägnierter Holzmaste JF - Holz als Roh- und Werkstoff PY - 1975 SN - 0018-3768 VL - 33 IS - 3 SP - 113 EP - 115 PB - Springer CY - Berlin AN - OPUS4-8285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin A1 - Scheruhn, Willi T1 - Dichtwerkstoffe für den Hochdruckteil von Sauerstoffdruckminderern JF - Die Berufsgenossenschaft PY - 1959 SN - 0340-9481 VL - 11 SP - 411 EP - 414 PB - Schmidt CY - Berlin AN - OPUS4-10037 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Beeinträchtigung eines Randschutzes von Bauholz durch Regen JF - Holz als Roh- und Werkstoff PY - 1959 SN - 0018-3768 VL - 17 SP - 10 EP - 18 PB - Springer CY - Berlin AN - OPUS4-10028 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Erich T1 - Neuester Stand der zerstörungsfreien Werkstoffprüfung und Beurteilung ihrer Befunde JF - Materialprüfung = Materials testing PY - 1959 SN - 0025-5300 VL - 1 IS - 3 SP - 93 EP - 100 PB - Carl Hanser Verlag CY - München AN - OPUS4-10052 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Streicher, Doreen A1 - Algernon, Daniel A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wiggenhauser, Herbert ED - Cruz, P. ED - Frangopol, D. T1 - Development and combined application of NDT echo-methods for the investigation of post tensioned concrete bridges T2 - Bridge maintenance, safety, management, life-cycle performance and cost T2 - 3rd International Conference on Bridge Maintenance, Safety and Management - "Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost" CY - Porto, Portugal DA - 2006-07-16 KW - Brückenuntersuchung KW - ZfP-Bau-Verfahren PY - 2006 SN - 0-415-40315-4 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 1 EP - 8(?) PB - Taylor & Francis CY - London AN - OPUS4-13866 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ecker, Klaus A1 - Wätjen, U. A1 - Berger, Achim A1 - Persson, L. A1 - Pritzkow, Wolfgang A1 - Radtke, Martin A1 - Riesemeier, Heinrich T1 - RBS, SY-XRF, INAA and ICP-IDMS of antimony implanted in silicon - A multi-method approach to characterize and certify a reference material JF - Nuclear instruments and methods in physics research B N2 - A layer of Sb atoms, implanted with an energy of 400 keV and a nominal dose of 5×1016 atoms/cm2 into a high purity silicon wafer, was certified for its areal density (atoms/cm2) using Rutherford backscattering spectrometry (RBS), instrumental neutron activation analysis (INAA) and inductively coupled plasma isotope dilution mass spectrometry (ICP-IDMS) and for its isotope ratio using INAA and ICP-IDMS. Excellent agreement between the results of the different independent methods was found. In the present work, the measurements of the homogeneity of the areal density of Sb, previously determined with RBS in spots having 1 mm diameter, are improved with synchrotron X-ray fluorescence analysis: Higher precision in even smaller sample spots allows to estimate a reduced inhomogeneity of the whole batch of samples of the order of only 0.4%. Thus the uncertainty of the certified value can further be reduced. Down to fractions of a chip with 0.3×0.4 mm2 area, the areal density is now certified as (4.81±0.06)×1016 Sb atoms/cm2, where the expanded uncertainty 0.06 (coverage factor k=2) corresponds to only 1.2%. The relative merits of the different analytical methods are discussed. KW - Certified reference material KW - RBS KW - INAA KW - ICP-IDMS KW - XRF KW - SY-XRF PY - 2002 DO - https://doi.org/10.1016/S0168-583X(01)01038-2 SN - 0168-583X SN - 1872-9584 VL - 188 IS - 1-4 SP - 120 EP - 125 PB - Elsevier CY - Amsterdam AN - OPUS4-13870 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kannengießer, Thomas A1 - Wolf, Martin A1 - Schobbert, Helmut T1 - Recent developments in nickel base material welding considering the influence of shielding gas on the hot cracking resistance T2 - Conference papers - Stainless Steel World America 2004 Conference & Expo T2 - Stainless Steel World America 2004 Conference & Expo CY - Houston, TX, USA DA - 2004-10-20 KW - Nickel base material KW - Welding KW - Shielding gas KW - Hot cracking resistance PY - 2004 SN - 90-73168-23-6 SP - 156 EP - 167 PB - KCI Publ. BV CY - Zutphen AN - OPUS4-4581 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Mayer, K. A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - 3D-visualisation of NDT data using a data fusion technique JF - Insight KW - Non-destructive testing KW - Radar KW - Ultrasonic KW - Data fusion KW - SAFT PY - 2003 SN - 0007-1137 VL - 45 IS - 12 SP - 800 EP - 808 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-4585 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin T1 - Head Checks, Belgrospi's & Co. - betriebsbedingte Schienenfehler mit Wirbelstrom prüfen T2 - DGZfP-Arbeitskreis T2 - DGZfP-Arbeitskreis CY - Berlin, Germany DA - 2004-03-30 PY - 2004 AN - OPUS4-4527 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin T1 - Head Checks, Belgrospi's & Co. - betriebsbedingte Schienenfehler mit Wirbelstrom prüfen T2 - DGZfP-Arbeitskreis T2 - DGZfP-Arbeitskreis CY - Magdeburg, Germany DA - 2005-03-16 PY - 2005 AN - OPUS4-4530 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Breitenbach, Martin T1 - Absoluter Anschluss der Stoffmenge an die SI-Einheiten Masse, Zeit und Stromstärke T2 - Aushang im Zweiggelände Adlershof der BAM, Haus 8.15, Flur - 5. Etage T2 - Aushang im Zweiggelände Adlershof der BAM, Haus 8.15, Flur - 5. Etage CY - Berlin, Germany DA - 2004-09-24 PY - 2004 AN - OPUS4-4519 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wöstmann, Jens A1 - Wiggenhauser, Herbert T1 - Datenfusion komplementärer Impuls-Echo Verfahren zur zerstörungsfreien Untersuchung von Betonbauteilen T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2004 T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Zerstörungsfreie Prüfung im Bauwesen KW - Radar KW - Ultraschall KW - Impact-Echo KW - Datenfusion KW - SAFT PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p37/p37.htm SN - 3-931381-55-2 SP - 1 EP - 15(?) PB - DGZfP CY - Berlin AN - OPUS4-5603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Reinsch, Stefan A1 - Sojref, Regine T1 - Alumina coatings prepared from aqueous sols T2 - JuniorEuroMat T2 - JuniorEuroMat CY - Lausanne, Switzerland DA - 2004-09-01 PY - 2004 AN - OPUS4-5634 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Procop, Mathias A1 - Radtke, Martin A1 - Krumrey, M. A1 - Hasche, K. A1 - Schädlich, S. A1 - Frank, W. T1 - Electron probe microanalysis (EPMA) measurement of thin-film thickness in the nanometre range JF - Analytical and bioanalytical chemistry N2 - The thickness of thin films of platinum and nickel on fused silica and silicon substrates has been determined by EPMA using the commercial software STRATAGEM for calculation of film thickness. Film thickness ranged in the order 10 nm. An attempt was made to estimate the confidence range of the method by comparison with results from other methods of analysis. The data show that in addition to the uncertainty of the spectral intensity measurement and the complicated fitting routine, systematic deviation caused by the underlying model should be added. The scattering in the results from other methods does not enable specification of a range of uncertainty, but deviations from the real thickness are estimated to be less than 20%. KW - Electron probe microanalysis KW - EPMA KW - Thin films KW - Thickness measurement KW - X-rays PY - 2002 DO - https://doi.org/10.1007/s00216-002-1514-5 SN - 1618-2642 SN - 1618-2650 VL - 374 SP - 631 EP - 634 PB - Springer CY - Berlin AN - OPUS4-7090 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böhning, Martin A1 - Goering, Harald A1 - Hao, Ning A1 - Mach, Reinhard A1 - Schönhals, Andreas ED - Cassidy, P. T1 - Polycarbonate/SiC nanocomposites - Influence of nanoparticle dispersion on molecular mobility and gas transport T2 - 7th International Symposium on Polymers for Advanced Technologies T2 - 7th International Symposium on Polymers for Advanced Technologies CY - Fort Lauderdale, FL, USA DA - 2005-09-21 KW - Nanocomposites KW - Nanoparticles KW - Polycarbonates KW - Dielectric properties KW - Gas permeation PY - 2005 VL - 16 IS - 2-3 SP - 262 EP - 268 PB - Wiley CY - Chichester AN - OPUS4-7062 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hattwig, Martin T1 - Investigations on the recoil of vented vessels T2 - Loss Prevention and Safety Promotion in the Process Industries - proceedings of the 3rd international symposium T2 - 3rd International Symposium on Loss Prevention and Safety Promotion in the Process Industrie CY - Basel, Switzerland DA - 1980-09-15 PY - 1980 N1 - Serientitel: Event / European Federation of Chemical Engineering – Series title: Event / European Federation of Chemical Engineering IS - 228 SP - 968 EP - 978 CY - Basel AN - OPUS4-9326 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hattwig, Martin T1 - Detonationsanlaufstrecken von Gasgemischen in Rohren großen Durchmessers JF - Amts- und Mitteilungsblatt der Bundesanstalt für Materialprüfung PY - 1980 SN - 0340-7551 VL - 10 IS - 4 SP - 274 EP - 278 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Kottlors, Christoph T1 - Vergleich von Verfahren zur quantitativen Bestimmung von Fluor-Verbindungen in Holz JF - Holz als Roh- und Werkstoff PY - 1961 SN - 0018-3768 VL - 19 SP - 346 EP - 352 PB - Springer CY - Berlin AN - OPUS4-10113 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Buchta, H. A1 - Konschak, Martin T1 - Vereisungen von Suerstoff-Druckminderern, ihre Ursachen und ihre Vermeidung JF - Die Berufsgenossenschaft PY - 1961 SN - 0340-9481 VL - 13 SP - 315 EP - 318 PB - Schmidt CY - Berlin AN - OPUS4-10133 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin A1 - Voigtsberger, Paul T1 - Untersuchungen über die elektrostatische Aufladung von Gasen JF - Arbeitsschutz PY - 1961 SN - 0003-7788 IS - 8 SP - 196 EP - 204 PB - Kohlhammer CY - Stuttgart AN - OPUS4-10134 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Stelling, Karen A1 - Böllinghaus, Thomas A1 - Wolf, Martin A1 - Schöler, Annett A1 - Burkert, Andreas A1 - Isecke, Bernd ED - Böllinghaus, T. ED - Herold, H. T1 - Hot cracks as stress corrosion cracking initiation sites in laser welded corrosion resistant alloys T2 - Hot cracking phenomena in welds N2 - Although hot cracks at weld surfaces of corrosion resistant alloys (CRAs) might provide access to respective aggressive media and thus, might provide the conditions for a local potential and pH drop, the interaction between hot cracking and corrosion phenomena has not been investigated up to the present. This particularly concerns the initiation of stress corrosion cracking inside such crevices. As a first approach to clarify the influence of hot cracks on corrosion resistance, considering particularly stress corrosion cracking, hot crack afflicted laser welds of three different CRAs have been subjected to a series of different corrosion tests. Besides the fact that the Drop Evaporation (DE) Test represents a more realistic procedure than standard immersion tests it turned out that hot cracks can obviously represent an initiation site of stress corrosion cracking in the austenitic stainless steel AISI 309 (German No. 1.4828). The susceptibility of such hot crack afflicted laser welds to stress corrosion cracking (SCC) significantly depends on temperature and chloride concentration of the test environment In comparison, the high nitrogen austenitic stainless steel AISI S 34565 (German No. 1.4565) did not exhibit any stress corrosion cracking associated with hot cracking. This material exhibited pitting corrosion and stress corrosion only in the base material. The Alloy 50 (German No. 2.4850), a Nickel based material, was susceptible to pitting corrosion, but showed no tendency towards stress corrosion cracking at all. T2 - International Workshop "Hot Cracking Phenomena in Welds" CY - Berlin, Germany DA - 2004-03-04 KW - Ni-Base Alloy KW - Stress corrosion Cracking KW - Hot Cracking KW - Laser Welding KW - Austenitic Stainless Steel KW - Drop Evaporation Test PY - 2005 SN - 3-540-22332-0 DO - https://doi.org/10.1007/3-540-27460-X_10 SP - 165 EP - 182 PB - Springer CY - Berlin AN - OPUS4-11852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Ralf A1 - Gottschling, Peter A1 - Gaber, Martin T1 - Water concentration and diffusivity in silicates obtained by vacuum extraction JF - Glass science and technology KW - Silicate glasses and crystals KW - Water KW - Degassing KW - Diffusion coefficient PY - 2005 SN - 0927-4472 VL - 78 IS - 2 SP - 76 EP - 89 PB - Elsevier CY - Amsterdam AN - OPUS4-11836 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gaber, Martin A1 - Müller, Ralf T1 - Thermal induced release of hydrogen from fused silica T2 - Programm und Referate / 79. Glastechnische Tagung T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 PY - 2005 SN - 3-921089-43-3 SP - 4 pages PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-11837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heller, I. A1 - Behrens, H. A1 - Gaber, Martin A1 - Müller, Ralf T1 - Wasserdiffusion in Floatglas T2 - Programm und Referate / 79. Glastechnische Tagung T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 PY - 2005 SN - 3-921089-43-3 SP - 4 Seiten PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-11838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Heckel, Thomas A1 - Hanspach, G. T1 - Advantage of a combined ultrasonic and eddy current examination for railway inspection trains T2 - ECNDT Berlin 2006, 9. Europäische ZfP-Konferenz N2 - Some years ago two railway inspection trains (RIT) already equipped with ultrasound, had additional advanced eddy current techniques installed. Recently a new RIT, was equipped with a system that was designed, from the beginning, to employ a combination of these two techniques for non-destructive rail inspection. The eddy current technique has been developed to enable identification and evaluation of rolling contact fatigue (RCF) defects. The ultrasound technique is aimed at measurements in the rail bulk volume, which are not feasible using the eddy current technique. Experience gained from application has shown that clear improvement on rail inspection can be achieved. For example, following DB AG guideline defects which are classified as group 2 using ultrasound testing can be further labeled as "distinguished positions" if for example head checking can be identified in the same position using the eddy current technique i.e. the new technique is capable of identifying two fundamentally different types of defects occurring at the same location. Such defects can then be then classified as Group 1 equivalent according to the DB AG guideline. Furthermore,- problem cases in the past, such as the decision whether a weld or rail joint is present for a fishing table can be reliably determined using additional information from the eddy current technique. In this presentation examples will be provided to demonstrate application. T2 - ECNDT Berlin 2006, 9. Europäische ZfP-Konferenz CY - Berlin, Germany DA - 2006-09-25 PY - 2006 AN - OPUS4-11839 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Osterloh, Kurt A1 - Hasenstab, Andreas A1 - Ewert, Uwe A1 - Krause, Martin A1 - Goebbels, Jürgen T1 - Mobile radiographische Untersuchung von Holz und Bäumen T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2005 T2 - DGZfP Jahrestagung CY - Rostock, Deutschland DA - 2005-05-02 KW - Digitale Radiographie KW - Mobiles Röntgen PY - 2005 SN - 3-931381-64-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 94-CD SP - 1(?) EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-11866 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Ulrich A1 - Schmidt, Martin A1 - Lohrer, Christian T1 - A numerical model to simulate smouldering fires in bulk materials and dust deposits JF - Journal of loss prevention in the process industries N2 - A numerical model is presented which consists of a set of partial differential equations for the transport of heat and mass fractions of eight chemical species to describe the onset of self-ignition and the propagation of smouldering fires in deposits of bulk materials or dust accumulations. The chemical reaction sub-model includes solid fuel decomposition and the combustion of char, carbon monoxide and hydrogen. The model has been validated against lab-scale self-ignition and smouldering propagation experiments and then applied to predictions of fire scenarios in a lignite coal silo. Predicted reaction temperatures of 550 K and propagation velocities of the smouldering front of about 6 mm/h are in good agreement with experimental values derived from lab-scale experiments. KW - Self-ignition KW - Combustible dust KW - Bulk materials KW - Smouldering fires KW - Numerical modelling PY - 2006 DO - https://doi.org/10.1016/j.jlp.2005.03.005 SN - 0950-4230 SN - 1873-3352 VL - 19 IS - 2-3 SP - 218 EP - 226 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-11832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schobbert, Helmut A1 - Böllinghaus, Thomas A1 - Wolf, Martin ED - Herlach, D. M. T1 - Metastable Primary Solidification Modes in the Fe-Cr-Ni System During Laser Welding T2 - Solidification and crystallization T2 - 8th EUROMAT 2003 CY - Lausanne, Switzerland DA - 2003-01-01 PY - 2004 SN - 3-527-31011-8 VL - 8 SP - 213 EP - 226 PB - Wiley-VCH CY - Weinheim AN - OPUS4-4988 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Selbstentzündung von Stäuben und Schüttgütern bei vermindertem Sauerstoffgehalt JF - Chemie - Ingenieur - Technik PY - 2002 UR - http://www3.interscience.wiley.com/journal/91014775/issue SN - 0009-286X SN - 1522-2640 VL - 74 IS - 12 SP - 1 EP - 6 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-5993 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Self-ignition of dust at reduced volume fractions of ambient oxygen JF - Journal of loss prevention in the process industries N2 - Experiments were performed to investigate the self-ignition behaviour of accumulations of four different technical dusts at oxygen volume fractions ranging from 1.3 to 21%. For this purpose a laboratory oven used for hot storage testing was modified to allow flushing with the pre-mixed oxygen/nitrogen mixture of the desired composition. It was found that for all sample volumes investigated the self-ignition temperatures were higher the lower was the oxygen volume fraction. In addition, the type of reaction changed obviously, since the apparent activation energy significantly decreased at oxygen volume fractions below 6%. However, it was still possible to observe exothermic effects at oxygen volume fractions as low as 1.3%. A numerical model was established to simulate the process of self-ignition including the coupled heat and mass transfer within the dust accumulation using a finite element solver. The model consists of six balance equations for the heat transfer and the transport of five chemical species. It shows that the model reflects self-ignition in dust accumulations with satisfying accuracy, as long as the input data generated by preceding experiments are reliable. KW - Self-ignition KW - Self-ignition temperatures KW - Dust KW - Numerical modelling PY - 2003 DO - https://doi.org/10.1016/S0950-4230(02)00095-5 SN - 0950-4230 SN - 1873-3352 VL - 16 SP - 141 EP - 147 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-5995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bär, S. A1 - Huber, G. A1 - Gonzalo, J. A1 - Perea, A. A1 - Munz, Martin T1 - Pulsed laser deposition of EU - Y2O3 thin films on (0001) alpha-Al2O3 JF - Applied physics A N2 - This paper focuses on the preparation and characterization of crystalline thin films of rare-earth-doped sesquioxides (Y2O3, Lu2O3) grown by pulsed laser deposition on single-crystal (0001) sapphire substrates. X-ray diffraction measurements show that the films with thicknesses between 1 nm and 500 nm were highly textured along the 111 direction. Using Rutherford backscattering analysis, the correct stoichiometric composition of the films was established. The emission and excitation spectra of europium-doped films with a thickness 100 nm look similar to those of the corresponding crystalline bulk material, whereas films with a thickness 20 nm show a completely different emission behavior. KW - Pulsed laser deposition KW - Integrated optical devices KW - X-ray diffraction KW - Atomic force microscopy KW - Luminescence PY - 2004 UR - http://www.sciencedirect.com/science/journal/0926860X DO - https://doi.org/10.1007/s00339-004-3029-8 SN - 0947-8396 VL - 80 IS - 2 SP - 209 EP - 216 PB - Springer CY - Berlin AN - OPUS4-5990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hattwig, Martin T1 - Selected aspects of explosion venting T2 - Loss prevention and safety promotion in the process industries - 2 T2 - 2nd International Symposium on Loss and Safety Promotion in the Process Industries CY - Heidelberg, Germany DA - 1977-09-06 PY - 1977 AN - OPUS4-8689 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Kottlors, Christoph T1 - Verteilung von Steinkohlenteeröl in Kiefernmasten nach Kesseldrucktränkung JF - Holz als Roh- und Werkstoff PY - 1977 SN - 0018-3768 VL - 35 SP - 113 EP - 116 PB - Springer CY - Berlin AN - OPUS4-8724 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Horn, J. A1 - Dohle, H. A1 - Gersonde, Martin T1 - Schutzsalzverteilung in mechanisch vorbehandelten Fichtenmasten nach Kesseldrucktränkung JF - Holz als Roh- und Werkstoff PY - 1977 SN - 0018-3768 VL - 35 SP - 67 EP - 73 PB - Springer CY - Berlin AN - OPUS4-8725 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin A1 - Haupt, W. T1 - Über die Nutzung poröser und körniger Materialien zur Entwicklung von Sicherungen zum Schutz gegen das Fortschreiten des explosiblen Azetylenzerfalls JF - Die Berufsgenossenschaft PY - 1962 SN - 0340-9481 VL - 14 PB - Schmidt CY - Berlin AN - OPUS4-10213 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Prüfung von vorbeugenden chemischen Schutzbehandlungen des Bauholzes im "Schwammkeller"-Versuch JF - Berichte aus der Bauforschung PY - 1962 SN - 0409-1108 VL - 26 SP - 55 EP - 65 PB - Ernst CY - Berlin AN - OPUS4-10199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bunte, J. A1 - Barcikowski, S. A1 - Burmester, T. A1 - Püster, T. A1 - Hertwig, Andreas A1 - Kautek, Wolfgang A1 - Krüger, Jörg A1 - Martin, Sven A1 - Spielmann, C. A1 - Lenner, M. A1 - Brose, M. T1 - Sicherer Umgang mit Ultrakurzpuls-Lasern, Teil 2: Sekundäre Gefährdungen JF - Laser-Magazin PY - 2005 SN - 0945-8875 IS - 4 SP - 13 EP - 18 PB - Magazin-Verl. CY - Bad Nenndorf AN - OPUS4-11002 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hertwig, Andreas A1 - Martin, Sven A1 - Krüger, Jörg A1 - Kautek, Wolfgang T1 - Interaction area dependence of the ablation threshold of ion-doped glass JF - Thin solid films N2 - The laser ablation behaviour of ion-doped glass filter materials under irradiation with femtosecond laser pulses was investigated with respect to spot size and repetition rate. The damage threshold fluence of Schott BG18 depends on the size of the irradiated area. The effect is discussed in terms of a defect-site model. KW - Femtosecond KW - Laser KW - Materials processing KW - Ablation KW - Threshold KW - Glass PY - 2004 DO - https://doi.org/10.1016/j.tsf.2003.11.131 SN - 0040-6090 VL - 453-454 SP - 527 EP - 530 PB - Elsevier CY - Amsterdam AN - OPUS4-11046 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hertwig, Andreas A1 - Martin, Sven A1 - Krüger, Jörg A1 - Kautek, Wolfgang T1 - Surface damage and color centers generated by femtosecond pulses in borosilicate glass and silica JF - Applied physics A N2 - Color center generation by femtosecond laser pulses (30 fs) is observed in a fluence range below the damage threshold in an alkali-free barium borosilicate (BBS) glass, and in a thin layer of SiO2 on a fused silica substrate. The color centers are characterized spectroscopically. The optical density of the color centers in BBS glass is by two orders of magnitude higher than that in silica. A healing process with a time constant of about 30 h can be found. PY - 2004 UR - http://www.sciencedirect.com/science/journal/0926860X DO - https://doi.org/10.1007/s00339-004-2634-x SN - 0947-8396 VL - 79 SP - 1075 EP - 1077 PB - Springer CY - Berlin AN - OPUS4-11047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Chung, Jae Un T1 - Epoxid-Grenzschichten nanomechanisch betrachtet T2 - Sitzung des Fachausschusses "Gefüge und Eigenschaften von Polymerwerkstoffen" der Deutschen Gesellschaft für Materialforschung (DGM) T2 - Sitzung des Fachausschusses "Gefüge und Eigenschaften von Polymerwerkstoffen" der Deutschen Gesellschaft für Materialforschung (DGM) CY - Vienna, Austria DA - 2005-10-13 PY - 2005 AN - OPUS4-10998 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bunte, J. A1 - Barcikowski, S. A1 - Burmester, T. A1 - Püster, T. A1 - Hertwig, Andreas A1 - Kautek, Wolfgang A1 - Krüger, Jörg A1 - Martin, Sven A1 - Spielmann, C. A1 - Lenner, M. A1 - Brose, M. T1 - Sicherer Umgang mit Ultrakurzpuls-Lasern, Teil 1: Primäre Gefährdungen JF - Laser-Magazin PY - 2005 SN - 0945-8875 IS - 2 SP - 6 EP - 11 PB - Magazin-Verl. CY - Bad Nenndorf AN - OPUS4-11001 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hao, Ning A1 - Goering, Harald A1 - Turky, Gamal A1 - Schönhals, Andreas T1 - Gas Transport and Molecular Mobility in Polymer Based Nanocomposite Systems T2 - 1st International Conference on Advanced Materials and their application, National Research Centre, Physics Division T2 - 1st International Conference on Advanced Materials and their application, National Research Centre, Physics Division CY - Cairo, Egypt DA - 2005-12-12 PY - 2005 AN - OPUS4-10976 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina T1 - Komplexe Widerstandstomografie an Bäumen T2 - Treffen der Arbeitsgruppe Magnetotellurik der Freien Universität Berlin, Technischen Universität Berlin, Universität Potsdam und GeoForschungszentrum Potsdam an der Freien Universität Berlin, Institut für Geologische Wissenschaften T2 - Treffen der Arbeitsgruppe Magnetotellurik der Freien Universität Berlin, Technischen Universität Berlin, Universität Potsdam und GeoForschungszentrum Potsdam an der Freien Universität Berlin, Institut für Geologische Wissenschaften CY - Berlin, Germany DA - 2006-01-31 PY - 2006 AN - OPUS4-12048 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Schröder, Volkmar T1 - Sicherheitstechnische Charakterisierung der Zerfallsreaktion von Tetrafluorethylen - Motivation und Hintergrund T2 - Vortragsreihe der TU Berlin im Fachgebiet "Anlagen- und Sicherheitstechnik", TU T2 - Vortragsreihe der TU Berlin im Fachgebiet "Anlagen- und Sicherheitstechnik", TU CY - Berlin, Germany DA - 2006-01-18 PY - 2006 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-11997 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Nehrig, Marko A1 - Bletzer, Claus Wilhelm A1 - Wille, Frank T1 - Pressure build-up during the fire test in type B(U) packages containing water - 13280 T2 - WM2013 Conference (Proceedings) T2 - WM2013 Conference CY - Phoenix, Arizona, USA DA - 2013-02-24 KW - Fire test KW - B(U) KW - Thermal test KW - Pressure KW - Water PY - 2013 SN - 978-0-9836186-2-1 SP - 1 EP - 12(?) CY - Phoenix, Arizona, USA AN - OPUS4-27997 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Wehrstedt, Klaus-Dieter A1 - Bulin, Michael T1 - Aufnahme sicherheitstechnischer Kenngrößen von Stäuben in den Gemeinsamen Stoffdatenpool Bund/Länder - Gruppierung vorhandener Daten und Ableiten bewerteter Bandbreiten JF - techn N2 - Staubexplosionen können in nahezu allen Branchen auftreten, in denen brennbare Schüttgüter und Stäube gehandhabt werden oder entstehen können, vor allem dort, wo Stäube in aufgewirbelter Form vorkommen. Abgelagerte Stäube können bei starker Erwärmung zur Entzündung gelangen. Die Beurteilung daraus entstehender Gefahren und das Auslegen von vorbeugenden und konstruktiven Schutzmaßnahmen erfolgt über sog. sicherheitstechnische Kenngrößen (STK). Im Rahmen eines vom Bundesland Sachsen geförderten Projekts sind von der Bundesanstalt für Materialforschung und -prüfung (BAM) STK brennbarer Stäube zu Staubgruppen zusammengefasst und in den Gemeinsamen Stoffdatenpool Bund/Länder (GSBL) integriert worden. Grundlage für die Staubgruppen waren zahlreiche Datensätze, die in der Datenbank GESTIS-STAUB-EX des Instituts für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung (IFA) veröffentlich sind. Angegeben werden allerdings nicht mehr die dort enthaltenen Kenngrößen einzelner Stäube, sondern Bandbreiten, innerhalb derer sich die STK der in den Staubgruppen zusammengefassten Stäube bewegen können. Je nach Datenlage wurden die sicherheitsrelevanten Grenzen dieser Bandbreiten mit einem Ranking versehen. KW - Sicherheitstechnische Kenngrößen KW - Stäube KW - Staubexplosionen KW - Datenbank PY - 2013 SN - 2191-0073 VL - 3 IS - 4 SP - 10 EP - 14 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-28064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bletzer, Claus Wilhelm A1 - Nehrig, Marko A1 - Feldkamp, Martin A1 - Wille, Frank A1 - Völzke, Holger T1 - Druckaufbau in Behältern mit feuchtem Inventar T2 - KONTEC 2013 - 11. Internationales Symposium 'Konditionierung radioaktiverBetriebs- und Stilllegungsabfälle' (Proceedings) T2 - KONTEC 2013 - 11. Internationales Symposium 'Konditionierung radioaktiverBetriebs- und Stilllegungsabfälle' CY - Dresden, Germany DA - 2013-03-13 KW - Druckaufbau KW - Radioaktive Abfälle KW - Endlager PY - 2013 IS - Sektion 4 / Vortrag 031 SP - 1 EP - 11(?) AN - OPUS4-28094 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lenke, Karoline A1 - Schmidt, R. A1 - Märtin, J. A1 - Hoffmann, G. A1 - Cherif, C. T1 - Simulation of the yarn transportation dynamics in a warp knitting machine JF - Textile Research Journal N2 - To date, in the textile manufacturing process of warp knitting, trouble-shooting and process optimization mainly rely on empirical knowledge and experiments. This factor limits the achievable increase in productivity and quality. On the other hand, using simulations, different phenomena that affect the quality of the knitted fabric and the knitting process can be clarified in the run-up of the experiments. Consequently, an increase in quality and flexibility can be reached with reduced experimental effort. This paper presents a process simulation of the warp thread dynamics in the thread feeding system of a warp knitting machine. For this purpose, a continuum model of the warp thread that includes the spatial dynamics of the thread and the axial transport movement has been developed. KW - Simulation of yarn transportation KW - Yarn transportation model KW - Warp knitting machine KW - Continuum model KW - Process optimization KW - Knitting PY - 2013 DO - https://doi.org/10.1177/0040517512470197 SN - 0040-5175 N1 - Geburtsname von Lenke, Karoline: Metzkes, K. - Birth name of Lenke, Karoline: Metzkes, K. VL - 83 IS - 12 SP - 1251 EP - 1262 PB - Sage Publ. CY - London AN - OPUS4-28381 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Meyer-Scherf, Ronald A1 - Kluge, Martin A1 - Schröder, Volkmar A1 - Spoormaker, T. T1 - Study of the spontaneous ignition of stoichiometric tetrafluoroethylene-air mixtures at elevated pressures JF - Journal of loss prevention in the process industries N2 - The Ignition Temperature (IT) of stoichiometric tetrafluoroethylene–air mixtures on hot walls was determined in a 3-dm³-reactor. Tests at elevated pressure conditions were performed, namely at 5, 15 and 25 bar(a), showing a decrease of the IT with the initial pressure. Furthermore, the measured ignition temperatures of stoichiometric tetrafluoroethylene–air mixtures were lower than the ignition temperatures required for the decomposition pure tetrafluoroethylene (Minimum Ignition Temperature of Decomposition, MITD) reported in previous works. Equations from the Semenov thermal explosion theory on spontaneous ignition were used to identify approximate combustion kinetics of tetrafluoroethylene from the experimental results. The determined kinetics was used for the prediction of the IT of stoichiometric tetrafluoroethylene-air by simplified calculation methods. A very good agreement with the experimental results was observed. KW - Tetrafluoroethylene KW - Combustion KW - Ignition KW - Self-ignition PY - 2013 DO - https://doi.org/10.1016/j.jlp.2013.02.008 SN - 0950-4230 SN - 1873-3352 N1 - Geburtsname von Meyer-Scherf, Ronald: Meyer, R. - Birth name of Meyer-Scherf, Ronald: Meyer, R. VL - 26 IS - 4 SP - 759 EP - 765 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-28548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Zeps, Robert A1 - Kluge, Martin A1 - Schröder, Volkmar A1 - Spoormaker, T. ED - Pierucci, S. ED - Klemes, J.J. ED - De Rademaeker, E. ED - Fabiano, B. ED - Buratti, S.S. T1 - The explosive decomposition of tetrafluoroethylene: large scale tests and simulations T2 - Proceedings of the 14th EFCE symposium on loss prevention and safety promotion in the process industries N2 - There is a lack of data on the self-ignition behaviour of tetrafluoroethylene (TFE) in industrial sized equipment. In order to assess the tendency of TFE for decomposition in large scale vessels, , a facility was designed and constructed. Tests were carried out in a cylindrical reactor with a volume of 100 L with initial pressures of 5 and 10 bar(a). The effect of the reacto r adjustment (vertical or horizontal) was taken into account. The current work describes the test set up and summarizes the experimental results achieved. Furthermore, this paper reports on a numerical model for the prediction of the self -heating of TFE in closed vessels, which was previously developed for small scale reactors and has been here validated for larger dimensions with the experiments performed in the new facility. T2 - 14th International symposium on loss prevention and safety promotion in the process industries CY - Florence, Italy DA - 2013-05-12 KW - Tetrafluoroethylene KW - Self-heating KW - Large-scale reactor KW - Numerical simulation PY - 2013 SN - 978-88-95608-22-8 SN - 1974-9791 N1 - Serientitel: Chemical engineering transactions – Series title: Chemical engineering transactions IS - 31 SP - 1 EP - 6(?) PB - AIDIC, Associazione Italiana di Ingegneria Chimica CY - Milano AN - OPUS4-28549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Wehrstedt, Klaus-Dieter A1 - Bulin, Michael T1 - Erweiterung der GSBL-Datenbank um sicherheitstechnische Kenngrößen brennbarer Stäube T2 - 13. BAM-PTB Kolloquium T2 - 13. BAM-PTB Kolloquium CY - Braunschweig, Germany DA - 2013-06-18 PY - 2013 AN - OPUS4-28713 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter A1 - Kunath, K. A1 - Uhlig, S. T1 - Ergebnisse und Ausblick Interlaboratory test 2010/11 DIN EN 15188:2007 T2 - 60. Sitzung des Arbeitskreises "Brennbare Stäube", BG-RCI Heidelberg T2 - 60. Sitzung des Arbeitskreises "Brennbare Stäube", BG-RCI Heidelberg CY - Heidelberg, Germany DA - 2013-06-12 PY - 2013 AN - OPUS4-28718 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Interlaboratory test 2010/11 "EN 15188:2007 - Self-ignition temperature": Ergebnisse Ringversuch Teilschritt 1 T2 - ProcessNet AA "Sicherheitstechnische Kenngrößen" T2 - ProcessNet AA "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2012-03-21 PY - 2012 AN - OPUS4-25653 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zier, M. A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Radtke, Martin A1 - Munnik, F. T1 - Accurate stopping power determination of 15N ions for hydrogen depth profiling by a combination of ion beams and synchrotron radiation JF - Nuclear instruments and methods in physics research B N2 - Hydrogen analysis is of particular importance in thin film technology and it is often necessary to obtain a depth profile. The method with the best depth resolution is NRA using the 6385 keV resonance of the 1H(15N,αγ)12C nuclear reaction. The correct quantification of the depth and concentration scales in the measured hydrogen profiles relies on accurate stopping power values. We present a method to deduce these values from a combination of two techniques: NRA and X-ray reflectometry (XRR). This method is applied to the determination of the stopping power of ~6.4 MeV 15N ions in H-containing amorphous Si-layers (a-Si:H). Density-independent stopping powers at different H concentrations are determined by combining the results from NRA and XRR with an overall uncertainty of 3.3%, showing good agreement with SRIM values. This work shows exemplary the methodology for future evaluation of stopping powers for quality assurance in NRA. KW - Nuclear reaction analysis KW - Hydrogen depth profiling KW - Stopping cross section KW - Linear energy transfer KW - Synchrotron radiation KW - XRR PY - 2012 DO - https://doi.org/10.1016/j.nimb.2011.07.027 SN - 0168-583X SN - 1872-9584 VL - 273 SP - 18 EP - 21 PB - Elsevier CY - Amsterdam AN - OPUS4-25722 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin T1 - Gas transport in glassy polymers and PNCs - experiment, analysis, modeling of diffusion, sorption and dilation T2 - Workshop: Polymers, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Laboratory for Non-Metals T2 - Workshop: Polymers, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Laboratory for Non-Metals CY - Zagreb, Croatia DA - 2012-05-23 PY - 2012 AN - OPUS4-25969 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolff, Dietmar A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Böhning, Martin T1 - Performance of neutron radiation shielding material (U)HMW-PE influenced by gamma radiation T2 - PSAM 11 ESREL 2012 - 11th International probabilistic safety assessment and management conference & The annual european safety and reliability conference (Proceedings) T2 - PSAM 11 ESREL 2012 - 11th International probabilistic safety assessment and management conference & The annual european safety and reliability conference CY - Helsinki, Finland DA - 2012-06-25 KW - (U)HMW-PE KW - Gamma irradiation KW - Shielding material KW - Cask for storage and transport of radioactive materials PY - 2012 SP - 1 EP - 8(?) AN - OPUS4-26176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Günther, U. A1 - Ballheimer, Viktor A1 - Linnemann, Konrad A1 - Wille, Frank A1 - Droste, Bernhard T1 - Experiences by German authority with safety case approach for welding seams as part of SNF transport package containments T2 - RAMTRANSPORT 2012 - 9th International Conference on the Radioactive Materials Transport and Storage (Proceedings) N2 - Federal Institute for Materials Research and Testing (BAM) is the responsible authority for the assessment of mechanical and thermal safety as well as quality issues within the licensing procedure for transport casks for radioactive materials. The assessment includes a brittle fracture analysis of all relevant cask components. For cask bodies where a steel bottom is welded to a steel shell, specimens for testing of sufficient fracture resistance can normally not be extracted directly from the welding seam area of the cask. Therefore, a methodology has to be developed to ensure compliance with the safety analysis considerations and the approved design specification. This paper describes such a methodology including brittle fracture analysis and de-termination of required material properties as well as aspects of quality assurance during manufacturing. T2 - RAMTRANSPORT 2012 - 9th International Conference on the Radioactive Materials Transport and Storage CY - London, UK DA - 2012-05-22 PY - 2012 IS - Session 4.2 RAM 18 SP - 1 EP - 6 AN - OPUS4-26344 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Sterthaus, Jens A1 - Schubert, Sven A1 - Wille, Frank T1 - Material Characterization and modeling within safety analysis of packages for transport of radioactive material T2 - ASME 2012 Pressure Vessels & Piping Division Conference T2 - ASME 2012 Pressure Vessels & Piping Division Conference CY - Toronto, Canada DA - 2012-07-15 PY - 2012 AN - OPUS4-26328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Günther, Uve A1 - Ballheimer, Viktor A1 - Wille, Frank T1 - Experiences by german authority with safety case approach for welding seams as part of SNF transport package containments T2 - RAMTRANSPORT 2012 T2 - RAMTRANSPORT 2012 CY - London, England DA - 2012-05-22 PY - 2012 AN - OPUS4-26332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Vogl, Jochen A1 - Lambacher, L. T1 - Blei-Isotopenanalysen an Pilgerzeichen T2 - Pilgerzeichenforschung Neue Ergebnisse und neue Aufgaben, Abendsymposium des Kunstgewerbemuseums (SMB) T2 - Pilgerzeichenforschung Neue Ergebnisse und neue Aufgaben, Abendsymposium des Kunstgewerbemuseums (SMB) CY - Berlin, Germany DA - 2013-03-14 PY - 2013 AN - OPUS4-27896 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wolff, Dietmar A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Böhning, Martin A1 - Goering, Harald ED - Yamamoto, T. T1 - (U)HMWPE as neutron radiation shielding materials: impact of gamma radiation on structure and properties T2 - Effects of radiation on nuclear materials N2 - Due to their extreme high hydrogen contents, high molecular weight (HMW-) and ultra-high molecular weight (UHMW-) polyethylene (PE) are a comprehensible choice as neutron radiation shielding material in casks for storage and transport of radioactive materials. But as a direct consequence of inserting radioactive material in such casks, gamma radiation occurs. Hence, the impact of gamma radiation on the molecular structure of polyethylene has to be taken into consideration. Consequently, PE has to withstand any type of gamma radiation induced degradation affecting safety relevant aspects in order to be applicable for long term neutron radiation shielding purposes during the whole storage period (in Germany, for instance, up to 40 years). The scope of our investigation comprises an estimation of the impact of gamma radiation and temperature on the molecular and supra molecular structure of the two types of PE used as neutron radiation shielding cask components. A further point which is worth exploring is to what extent these changes are detectable by conventional analysis methods. Therefore, thermoanalytical measurements were performed such as differential scanning calorimetry (DSC), thermo mechanical analysis (TMA), dynamic mechanical analysis (DMA), and thermo gravimetric analysis (TGA). Additionally optical and weighing methods were applied. With those methods it is possible to detect structural changes in polyethylene induced by exposure to gamma radiation. The observed amounts of changes of the irradiated material are not safety relevant for the application of polyethylene as neutron radiation shielding material; moreover, some properties actually improve via irradiation. KW - HMW-PE KW - UHMW-PE KW - Gamma irradiation KW - Neutron radiation shielding material PY - 2013 SN - 978-0-8031-7533-4 DO - https://doi.org/10.1520/STP103980 N1 - Serientitel: STP – Series title: STP VL - 25 IS - STP 1547 SP - 211 EP - 227 AN - OPUS4-27931 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Deubel, Jan A1 - Werrel, Martin A1 - Krüger, Simone A1 - Krause, U. T1 - Experimentelle Untersuchungen zum Einfluss von Brandbeschleuniger auf den Verlauf von Raumbränden T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 2013-03-21 KW - Brandbeschleuniger KW - Raumbrand PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 9(?) AN - OPUS4-27989 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Raspe, Tina A1 - Fettig, Ina A1 - Berger, Anka T1 - Brandtechnologische und chemisch-analytische Untersuchungen zum Einfluss von Brandbeschleunigern bei Zimmerbränden T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop N2 - Anhand von 5 verschiedenen Zimmerbrandversuchen wurde der Einfluss von Brandbeschleunigern auf den Brandverlauf experimentell untersucht. Es wurden verschiedene brandtechnologische Kennwerte, wie der Massenverlust des gesamten Brandraums, Brandraumtemperaturen, die Wärmefreisetzungen sowie die Rauchgasemissionen ermittelt und beurteilt. Die Rauchgasanalyse erfolgte im Schlot, im Brandraum sowie in der Brandraumöffnung mittels Fourier Transformierte Infrarot-FTIR-Spektroskopie. Neben diesen brandtechnologischen Untersuchungen erfolgten auch chemisch-analytische Untersuchungen nach dem Brand, mit dem Ziel, den eingesetzten Brandbeschleuniger nachzuweisen. Im Anschluss an die jeweiligen Zimmerbrandversuche wurden verschiedene Brandrückstandsproben aus dem Brandschutt, Wischproben von den Wänden und den übriggebliebenen Gegenständen sowie Proben in Form von Adsorbensmaterialien und Tenax-Röhrchen genommen und mit Hilfe der HSSPME-GC-MS-Methode (Headspace-Solid Phase Micro Extraction-Gas Chromatographie-Massenspekrometrie) in Hinblick eines möglichen Brandbeschleunigernachweis analysiert. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Analytik KW - Brandbeschleuniger KW - Raumbrand PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 10 AN - OPUS4-27991 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Nehrig, Marko A1 - Bletzer, Claus Wilhelm A1 - Wille, Frank T1 - Pressure Build-up During the Fire Test in Type B(U) Packages Containing Residual Water T2 - Waste Management Symposia 2013 T2 - Waste Management Symposia 2013 CY - Phoenix, AZ, USA DA - 2013-02-24 PY - 2013 AN - OPUS4-27944 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Kunath, K. A1 - Lüth, Peter A1 - Schmidt, Martin A1 - Simon, K. A1 - Uhlig, S. T1 - Evaluation of the interlaboratory test 2010-2011 on the method DIN EN15188:2007 'Determination of the spontaneous ignition behaviour of dust accumulations' N2 - For the classification and safe handling and use of the chemicals, special standardized testing proce-dures have been developed and are used world-wide. Safety experts must be able to fully rely on the precise execution of the respective laboratory tests and assessments. In this context interlaboratory tests (round robin tests, interlaboratory comparisons / intercomparisons) are a crucial element of a laboratory's quality system. Participation in interlaboratory tests is explicitly recommended by the standard ISO/IEC 17025. The present document reports on the results of the interlaboratory test 2010/2011 on the test method DIN EN 15188:2007 “Determination of the spontaneous ignition behaviour of dust accumulations” [1] which was organized by the Center for Quality Assurance for Testing of Dangerous Goods and Haz-ardous Substances. The test method DIN EN 15188:2007 is applied to characterize the self-ignition behaviour of combus-tible dusts. The experimental basis for describing the self-ignition behaviour of a given dust is the de-termination of the self-ignition temperatures (TSI) of differently-sized volumes of the dust sample by isoperibolic hot storage experiments (storage at constant oven temperatures) in commercially availa-ble ovens. The results thus measured reflect the dependence of self-ignition temperatures upon dust volume [1]. Several internal investigations and interlaboratory comparisons in the past have shown significant differences between the lab-specific results of hot storage tests. Figure 2-1 shows the Pseudo-Arrhenius plot of hot storage tests of eight different laboratories (Round Robin Test 2002, BAM). The dust under this investigation was Lycopodium powder (spores). The par-ticipants of this interlaboratory test used different laboratory ovens (size, ventilation) as well as differ-ent sample baskets (shape, mesh size, single- and double-walled). Figure 2-1 shows clearly that this test failed to produce reasonable reproducibility of the TSI between the different laboratories. As possible reasons for the deviations have been identified lab-specific dif-ferences, e.g.: - oven ventilation (enforced, natural convection), - oven size, - sample baskets, - radiation effects, - measuring precision (temperature difference between tests with ignition and no ignition), - minimum sample size. To reduce the differences between the labs it was necessary to ameliorate the testing method and to improve the execution of the method by the lab. From there, the installation of an inner chamber into the laboratory oven was suggested as experimental set-up in EN 15188:2007 to provide more repro-ducible test conditions. The aappropriateness of this set-up has not been verified yet. The current interlaboratory test 2010-2011 focuses on the use of a special mesh wire screen and spe-cial volumes of the sample baskets (cubes) to normalise/harmonise the test conditions in the different labs. In preparation for the interlaboratory test a joint program between Syngenta and BAM has been initiated in 2009. As a result of these investigations a modified set-up ( chapter 3) has been identi-fied to be probably more appropriate than the suggested set-up in DIN EN-15188:2007. Due to the time-consuming test procedure and to optimize the workflow for the laboratories this in-terlaboratory test should be performed stepwise as a multi-level test ( chapter 5.4) on one typical test sample. KW - Interlaboratory test KW - Self-ignition KW - Spontaneous ignition PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-282978 SN - 978-3-9815748-4-5 IS - Final Report SP - 1 EP - 113 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-28297 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kaiser, J. A1 - Szczerba, Wojciech A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe A1 - Radtke, Martin A1 - Albrecht, M. A1 - Lu, Y. A1 - Ballauff, M. T1 - The structure of AuPd nanoalloys anchored on spherical polyelectrolyte brushes determined by x-ray absorption spectroscopy JF - Faraday discussions N2 - Well-defined and facetted bimetallic gold–palladium nanoalloys have been synthesized and anchored in spherical polyelectrolyte brushes (SPB) as composite particles (AuPd@SPB). These particles are better catalysts in aqueous phase than the pure metals. The atomistic arrangement of these nanoalloys has been analysed by extended X-ray absorption fine structure (EXAFS) spectroscopy at the Au–L3 and the Pd–K absorption edge. The samples with high amounts of gold appear as almost statistically mixed random alloys. Alloy compositions with less gold show slight enrichment of Pd at the surface of the particle. In addition, signals of non-metallic palladium appear at the Pd–K edge which indicate the presence of the Pd2+ species in addition to metallic palladium. The relation of these structural features to the catalytic activity is discussed. KW - EXAFS KW - Nanoalloys KW - Gold KW - Palladium KW - K-edge KW - L3-edge KW - HR-TEM KW - Synchrotron radiation KW - BAMline PY - 2013 DO - https://doi.org/10.1039/c3fd20132e SN - 1359-6640 SN - 1364-5498 VL - 162 SP - 45 EP - 55 PB - Soc. CY - Cambridge [u.a.] AN - OPUS4-28300 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Raspe, Tina T1 - Welche stofflichen und energetischen Gefahren gehen von Wohnzimmerbränden aus? T2 - Vfdb 2013 - 61. Jahresfachtagung N2 - Welche stofflichen und energetischen Gefahren während und nach einem Wohnzimmerbrand auftreten können, werden im Rahmen dieses Vortrages vorgestellt. Im Mittelpunkt stehen dabei die Rauchgasentwicklung, die Wärmefreisetzung, die entstehenden Rauchgastemperaturen sowie die Rauchgaszusammensetzung. In den Einrichtungen der Gesellschaft für Materialforschung und Prüfungsanstalt für das Bauwesen Leipzig mbH (MFPA) wurden dazu fünf verschiedene Wohnzimmerbrandversuche durchgeführt. Die Modell-Zimmer wurden jeweils mit dem gleichen Mobiliar ausgestattet. Als Brandbeschleuniger kamen Benzin und Diesel als Gemisch zum Einsatz. Bei den Versuchen zeigte sich unter anderem, dass der Brandbeschleuniger deutlich die Zeit bis zum Flashover verkürzt. Aus den ermittelten Kennwerten zur Wärmefreisetzung und den Rauchgastemperaturen können Rückschlüsse auf die energetischen Gefahren abgeleitet werden. Die quantitative Erfassung toxischer Rauchgaskomponenten erfolgte mit Hilfe der Fourier-Transformations- Infrarot-(FTIR)-Spektroskopie. Die qualitative und quantitative Rauchgaszusammensetzung wurde dabei in der Brandraummitte, an der Brandraumöffnung, unter der Brandraumdecke und im Schlot ermittelt. Aus der Massenverlustrate und der quantitativen Rauchgasanalyse können Aussagen zur Rauchgastoxizität getroffen werden und die stofflichen Gefahren beurteilt werden. Das Wissen über die Bildung von energetischen und stofflichen Brandprodukten ermöglicht somit eine risikogerechte Beurteilung der Brandgefahren bei Raumbränden, auch in Hinblick auf die unterschiedlichen Brandphasen. T2 - Vfdb 2013 - 61. Jahresfachtagung CY - Weimar, Germany DA - 27.05.2013 KW - Brand KW - Rauchgasanalytik PY - 2013 SP - 771 EP - 787 CY - Altenberge AN - OPUS4-28628 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wolf, Martin A1 - Kannengießer, Thomas A1 - Böllinghaus, Thomas ED - Carl E. Cross, ED - John C. Lippold, ED - Böllinghaus, T. ED - Herold, H. T1 - Determination of critical strain rate for solidification cracking by numerical simulation T2 - Hot cracking phenomena in welds II PY - 2008 SN - 978-3-540-78627-6 IS - Part I SP - 77 EP - 92 PB - Springer CY - Berlin AN - OPUS4-24488 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ordavo, I. A1 - Ihle, S. A1 - Arkadiev, V. A1 - Scharf, Oliver A1 - Soltau, H. A1 - Bjeoumikhov, A. A1 - Bjeoumikhova, S. A1 - Buzanich, Günter A1 - Gubzhokov, R. A1 - Günther, A. A1 - Hartmann, R. A1 - Holl, P. A1 - Kimmel, N. A1 - Kühbacher, M. A1 - Lang, M. A1 - Langhoff, N. A1 - Liebel, A. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Schaller, G. A1 - Schopper, F. A1 - Strüder, L. A1 - Thamm, C. A1 - Wedell, R. T1 - A new pnCCD-based color X-ray camera for fast spatial and energy-resolved measurements JF - Nuclear instruments and methods in physics research A N2 - We present a new high resolution X-ray imager based on a pnCCD detector and a polycapillary optics. The properties of the pnCCD like high quantum efficiency, high energy resolution and radiation hardness are maintained, while color corrected polycapillary lenses are used to direct the fluorescence photons from every spot on a sample to a corresponding pixel on the detector. The camera is sensitive to photons from 3 to 40 keV with still 30% quantum efficiency at 20 keV. The pnCCD is operated in split frame mode allowing a high frame rate of 400 Hz with an energy resolution of 152 eV for Mn Kα (5.9 keV) at 450 kcps. In single-photon counting mode (SPC), the time, energy and position of every fluorescence photon is recorded for every frame. A dedicated software enables the visualization of the elements distribution in real time without the need of post-processing the data. A description of the key components including detector, X-ray optics and camera is given. First experiments show the capability of the camera to perform fast full-field X-Ray Fluorescence (FF-XRF) for element analysis. The imaging performance with a magnifying optics (3×) has also been successfully tested. KW - X-ray CCD camera KW - pnCCD KW - Fast X-ray imaging KW - XRF KW - Full-field X-ray fluorescence KW - Elemental analysis KW - High quantum efficiency KW - High energy resolution KW - Polycapillary optics PY - 2011 DO - https://doi.org/10.1016/j.nima.2011.05.080 SN - 0168-9002 SN - 0167-5087 VL - 654 SP - 250 EP - 257 PB - North-Holland CY - Amsterdam AN - OPUS4-24370 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Goering, Harald A1 - von der Ehe, Kerstin A1 - Robertson, Daniela A1 - Wolff, Dietmar T1 - Characterization of structural changes in irradiated UHMWPE T2 - 11. Schwarzheider Kunststoffkolloquium T2 - 11. Schwarzheider Kunststoffkolloquium CY - Schwarzheide, Germany DA - 2011-09-21 PY - 2011 AN - OPUS4-24423 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schröder, Volkmar T1 - Numerical analysis of the effect of the electrode distance during the determination of the flammability limits of gases T2 - COMSOL Conference 2011 (Proceedings) N2 - COMSOL Multiphysics® was used as a tool for the better understanding of the evolution of flow patterns during the induced ignition of gases. A simplified model was developed for the scope, by coupling the weakly compressible Navier Stokes module and the convection and conduction module. The current paper presents the results of the performed simulations. T2 - COMSOL Conference 2011 CY - Ludwigsburg, Germany DA - 26.10.2011 KW - Spark ignition KW - Gas flow KW - Temperature PY - 2011 SN - 978-0-9839688-0-1 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 1 EP - 7 CY - Stuttgart AN - OPUS4-24700 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Spoormaker, T. T1 - Der Stoff, aus dem die Zukunft ist JF - Economic engineering N2 - Beim begehrten Kunststoff Teflon führt kein Weg an einem komplexen Herstellungsprozess vorbei, der aufgrund der besonderen Eigenschaften des Ausgangsstoffes spezieller sicherheitstechnischer Anforderungen bedarf. Comsol Multiphysics unterstützte Wissenschaftler in der Auslegung der Produktionsanlagen bei der Identifizierung von Gefahrenquellen. KW - Tetrafluorethylen KW - Selbstentzündung KW - Numerisches Modell PY - 2011 SN - 1866-5004 SN - 1436-3348 SN - 0939-5504 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 6 SP - 64 EP - 66 PB - Göller CY - Baden-Baden AN - OPUS4-24706 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Kreißig, Michael A1 - Hensel, Christina A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - Preventing the explosion of acetylene cylinders involved in fire with help of numerical modeling JF - Journal of loss prevention in the process industries N2 - The current paper describes a mathematical model, which was developed to simulate the heat transfer in acetylene cylinders during exposure to a fire. The cases of a direct engulfment of the cylinder in the flames and of exposure to a distant fire were considered. Furthermore, the model was also applied to the prediction of the heat transfer during the cooling with water of heated acetylene cylinders, in order to assess the effectiveness of this procedure as a measure to prevent the burst of the cylinder. To provide data for the definition and validation of the model a total of 13 bonfire tests with 8.9-, 10- and 50-dm³-cylinders were performed, where pressure and temperature measurements in the samples were performed. During 5 experiments the fire was extinguished before the expected cylinder burst and a cooling with water was applied. In the paper a short description of the experimental set-up and of the test results is given. Finally, a comparison with the model predictions is provided, showing reasonable agreement. KW - Acetylene cylinders KW - Fire KW - Explosion KW - Cooling KW - Numerical model PY - 2012 DO - https://doi.org/10.1016/j.jlp.2011.10.006 SN - 0950-4230 SN - 1873-3352 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 25 IS - 2 SP - 364 EP - 372 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-25137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Spoormaker, T. A1 - Schröder, Volkmar T1 - On the minimum ignition temperature for the explosive decomposition of tetrafluoroethylene on hot walls: Experiments and calculations JF - Journal of loss prevention in the process industries N2 - The Minimum Ignition Temperature of Decomposition (MITD) of tetrafluoroethylene in a partially heated pipe was analyzed for different initial pressures (5, 10 and 15 bara). The pipe used had an internal length of 1 m, an internal diameter of 30 mm with a volume of about 0.7 dm³ and was vertically oriented. Pressure at the pipe top and temperature at four different locations along the pipe axis were measured. Tetrafluoroethylene was found to decompose at lower temperatures for increasing initial pressures, in agreement with previous tests with reactors with fully heated walls. A complete passive quenching in the non-heated part of the pipe was observed only for an initial pressure of 5 bara, while for higher initial pressures, the decomposition propagated completely along the test pipe. Moreover, the test results on the MITD were compared with data from previous experiments in fully heated 0.2 and 3 dm³ cylindrical reactors and showed a decrease of the MITD with the heated volume through heated surface ratio of the vessel. Furthermore, the prediction of the MITD of tetrafluoroethylene by simplified calculation methods was attempted, showing a good agreement with the experimental results. KW - Tetrafluoroethylene KW - Decomposition KW - Self-ignition PY - 2012 DO - https://doi.org/10.1016/j.jlp.2011.11.005 SN - 0950-4230 SN - 1873-3352 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 25 IS - 2 SP - 293 EP - 301 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-25138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - The Color X-Ray Camera: Basics, Applications and Perspectives T2 - Third Joint BER II and BESSY II Users´ Meeting T2 - Third Joint BER II and BESSY II Users´ Meeting CY - Berlin, Germany DA - 2011-11-30 PY - 2011 AN - OPUS4-25127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Wolff, Dietmar A1 - Böhning, Martin A1 - Goering, Harald T1 - Radiation induced structural changes of (U)HMW polyethylene with regard to its application for radiation shielding T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials (Proceedings) N2 - The special properties of high molecular weight polyethylene (HMW-PE) and ultra high molecular weight polyethylene (UHMW-PE) result basically from their extreme chain lengths and their high degree of crystallinity. As high-performance polymers, they are used for a variety of applications. UHMW-PE in particular is often utilized for endoprothesis (due to its excellent slip and wear properties) and due to its high hydrogen content as a neutron moderator in casks for storage and transport of radioactive materials. To prepare the material for instance for its use as a total joint replacement, it is exposed to radiation for several reasons, such as sterilization and crosslinking, leading to partial improvement of the mechanical properties (e.g. fracture toughness, crack propagation resistance, wear resistance) and better chemical stability. To be applicable for long term radiation shielding purposes for instance over a period of 40 years, PE has to withstand any type of degradation affecting safety relevant aspects. The scope of our investigation comprises an estimation of the radiation impact on the molecular and supra molecular structure of two types of PE and to what extent these changes are detectable by thermo-analytical (TA) methods, such as Differential Scanning Calorimetry (DSC), Thermo Mechanical Analysis (TMA), Dynamic Mechanical Analysis (DMA) and Thermo Gravimetric Analysis (TGA). Additionally FT-IR spectroscopy as well as density and gas sorption measurements were carried out. Due to the poor solubility of HMW-PE and UHMW-PE, some classical analytical techniques are not applicable. But TA-methods represent a feasible approach to detect structural and morphological features of these materials as well as changes caused by external influences, such as thermal treatment and/or irradiation. With the combination of the applied TA-techniques it is possible to distinguish between crosslinking and degradation. T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 PY - 2010 SP - 1 EP - 8 (T25/Paper 173) AN - OPUS4-24621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rodrigues, M. A1 - Schreiner, M. A1 - Melcher, M. A1 - Guerra, M. A1 - Salomon, J. A1 - Radtke, Martin A1 - Alram, M. A1 - Schindel, N. T1 - Characterization of the silver coins of the Hoard of Becin by x-ray based methods JF - Nuclear instruments and methods in physics research B N2 - Four hundred sixteen silver coins stemming from the Ottoman Empire (16th and 17th centuries) were analyzed in order to confirm the fineness of the coinage as well as to study the provenance of the alloy used for the coins. As most of the coins showed the typical green patina on their surfaces due to corrosion processes which have led to the depletion of copper in the near-surface domains of the silver coins in comparison to their core composition, small samples by cutting splinters from the coins had to be taken, embedded in synthetic resin and cross-sectioned in order to investigate the true-heart metal composition. The type of the alloy was investigated as well as if coins minted in different locations demonstrated homogeneous traits concerning the predominant impurities which could suggest a common ore. Several X-ray based techniques (µ-XRF, µ-SRXRF and µ-PIXE) could be applied in order to determine the silver contents as well as the minor and trace elements. Finally, SEM/EDX was applied in order to study the homogeneity/heterogeneity of the coins and the presence of surface enrichments. In general, the silver content of the analyzed specimen varies between 90% and 95%. These outcomes have not supported the historical interpretations, which predict that during the period studied a debasement of approximately 44% of the silver content of the coins should have occurred. KW - PIXE KW - SRXRF KW - SEM/EDX KW - Silver coins PY - 2011 DO - https://doi.org/10.1016/j.nimb.2011.04.068 SN - 0168-583X SN - 1872-9584 VL - 269 IS - 24 SP - 3041 EP - 3045 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-25289 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Tina T1 - Complex resistivity measurements on oak JF - European journal of wood and wood products N2 - In this paper complex electrical resistivity measurements on oak samples are described. They were performed to study the effect of anisotropy, moisture content and fungi-infection. The laboratory results indicate that anisotropy of wood affects not only the electrical resistivity but also the phase shift. The results can be explained by the macro- and microstructure of wood. The moisture experiment showed that resistivity and phase behave differently. As expected, resistivity decreases with increasing moisture. In contrast, phase and the imaginary part of conductivity first increase with rising moisture content but then start to decrease again at higher moisture level. The experiment involving fungi-infected wood proved particularly important. Its results suggest that phase can be used as an indicator for the structural damage of wood cells.-----------------------------------------------------------------------------------------------------------------------------------------------------------In diesem Artikel werden die Ergebnisse von Messungen des komplexen elektrischen Widerstands an Eichenholz gezeigt. Mit dem Verfahren der Spektral Induzierten Polarisation (SIP) wurden Untersuchungen zur Anisotropie, zum Wassersättigungsverhalten und zum Pilzbefall an Eichenkernholzproben durchgeführt. Diese Laborergebnisse zeigen, dass die Anisotropie des Holzes nicht nur Einfluss auf den elektrischen spezifischen Widerstand hat, sondern auch auf die Phasenverschiebung zwischen Strom- und Spannungssignal. Beim hier gezeigten Sättigungsversuch zeigte sich auch, dass sich Phase und spezifischer Widerstand verschieden verhalten. Während der Widerstand mit zunehmender Holzfeuchte kontinuierlich abnimmt, steigt die Phase bis zu einem bestimmten Holzfeuchtegehalt an und nimmt danach erst ab. Weitreichende Konsequenzen hatten die Experimente, bei denen gesundes Eichenkernholz mit dem braunfäuleerregenden Pilz Daedalea Quercina infiziert wurde. Aus diesen Ergebnissen lässt sich schließen, dass sich der komplexe elektrische Widerstand als Diagnosemethode für Pilzbefall eignen kann. KW - Spectral induced polarisation (SIP) KW - Anisotropy KW - Moisture KW - Daedalea Quercina KW - Electrical measurements PY - 2012 DO - https://doi.org/10.1007/s00107-010-0493-z SN - 0018-3768 VL - 70 IS - 1-3 SP - 45 EP - 53 PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-25272 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - El-Hasan, T. A1 - Szczerba, Wojciech A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Kersten, M. T1 - Cr(VI)/Cr(III) and As(V)/As(III) ratio assessments in Jordanian spent oil shale produced by aerobic combustion and anaerobic pyrolysis JF - Environmental science & technology N2 - With the increase in the awareness of the public in the environmental impact of oil shale utilization, it is of interest to reveal the mobility of potentially toxic trace elements in spent oil shale. Therefore, the Cr and As oxidation state in a representative Jordanian oil shale sample from the El-Lajjoun area were investigated upon different lab-scale furnace treatments. The anaerobic pyrolysis was performed in a retort flushed by nitrogen gas at temperatures in between 600 and 800 °C (pyrolytic oil shale, POS). The aerobic combustion was simply performed in porcelain cups heated in a muffle furnace for 4 h at temperatures in between 700 and 1000 °C (burned oil shale, BOS). The high loss-on-ignition in the BOS samples of up to 370 g kg–1 results from both calcium carbonate and organic carbon degradation. The LOI leads to enrichment in the Cr concentrations from 480 mg kg–1 in the original oil shale up to 675 mg kg–1 in the ≥850 °C BOS samples. Arsenic concentrations were not much elevated beyond that in the average shale standard (13 mg kg–1). Synchrotron-based X-ray absorption near-edge structure (XANES) analysis revealed that within the original oil shale the oxidation states of Cr and As were lower than after its aerobic combustion. Cr(VI) increased from 0% in the untreated or pyrolyzed oil shale up to 60% in the BOS ash combusted at 850 °C, while As(V) increased from 64% in the original oil shale up to 100% in the BOS ash at 700 °C. No Cr was released from original oil shale and POS products by the European compliance leaching test CEN/TC 292 EN 12457-1 (1:2 solid/water ratio, 24 h shaking), whereas leachates from BOS samples showed Cr release in the order of one mmol L–1. The leachable Cr content is dominated by chromate as revealed by catalytic adsorptive stripping voltammetry (CAdSV) which could cause harmful contamination of surface and groundwater in the semiarid environment of Jordan. KW - Trace-elements KW - Fly-ash KW - Speciation KW - Chromium KW - Sediments KW - Behavior KW - Metals KW - Xanes KW - Cr KW - Transformation PY - 2011 DO - https://doi.org/10.1021/es200695e SN - 0013-936X SN - 1520-5851 VL - 45 IS - 22 SP - 9799 EP - 9805 PB - ACS Publ. CY - Washington, DC AN - OPUS4-25290 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bothe, Martin A1 - Mya, K.Y. A1 - Lin, E.M.J. A1 - Yeo, C. C. A1 - Lu, X. A1 - He, C. A1 - Pretsch, Thorsten T1 - Triple-shape properties of star-shaped POSS-polycaprolactone polyurethane networks JF - Soft matter N2 - Here, we present an investigation of the triple-shape properties of star-shaped polyhedral oligomeric silsesquioxane-poly(ε-caprolactone) polyurethanes (SPOSS-PUs), which have three-dimensional network structures. In a typical 'triple-shape functionalization process', mostly consisting of two tensile deformations at different temperatures, chain immobilization of the polymer network component poly(ε-caprolactone) (PCL) was successfully realized first through crystallization and then through vitrification. Subsequently, large parts of the respective strains were released under stress-free recovery conditions. The two-fold fixed ('programmed') specimens responded to heating with two independent length contractions (switching steps); the first shape change was associated with PCL devitrification and the second one with the melting of hitherto crystalline PCL. It was revealed that the triple-shape properties of SPOSS-PU networks considerably depend on PCL network chain length. When applying exactly the same 'triple-shape creation procedure', larger strain releases were detected in the first transition for polymers with a higher PCL network chain length, whereas the second transition was more accentuated for SPOSS-PU networks with a shorter PCL chain length. In the course of thermo-mechanical cycling, the formation of a neck during the second tensile deformation was repeatedly detected for SPOSS-PUs with higher PCL network chain length; in the subsequent recovery process the specimens even exhibited the highest total strain recoverability. Finally, gradual strain release could be achieved at temperatures below the PCL melting transition through the selection of up to four temperature holding steps, at which every time stable shapes were formed. KW - Shape memory polymer KW - Active polymer KW - Triple-shape polymer KW - Hybrid star-shaped polymer KW - POSS-polycaprolactone polyurethanes KW - Thermo-mechanical properties PY - 2012 DO - https://doi.org/10.1039/c1sm06474f SN - 1744-683X VL - 8 IS - 4 SP - 965 EP - 972 PB - RSC Publ. CY - Cambridge AN - OPUS4-25260 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Scharf, Oliver A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Arkadiev, V. A1 - Wedell, R. A1 - Bjeoumikhov, A. A1 - Langhoff, N. A1 - Ihle, S. A1 - Soltau, H. A1 - Ordavo, I. T1 - The Colour X-Ray Camera: Basics, Applications and Perspectives T2 - Third Joint BER II and Bessy II User`s Meeting T2 - Third Joint BER II and Bessy II User`s Meeting CY - Berlin, Germany DA - 2011-11-30 PY - 2011 AN - OPUS4-25269 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisenacher, Germar A1 - Scheidemann, Robert A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard T1 - Approach for a finite element material model for wood for application in mechanical safety cases of transport packages T2 - 52nd INMM Annual meeting (Proceedings) N2 - BAM Federal Institute for Materials Research and Testing is the competent authority for mechanical safety assessment of transport packages for radioactive material in Germany. The further development of state-of-the-art technology concerning assessment methods is essential for a qualified work of involved designers and authority experts. The paper gives an example of current development done to improve understanding and modeling capabilities of wood filled impact limiter. In order to reduce the loads applied to the package containment, which result from regulatory drop tests, most packages are protected by energy dissipating impact limiter. Wood, encapsulated by steel sheets, is one of the materials typically used for energy dissipation in these impact limiter. Very often, mechanical safety cases regarding the 9 m drop test are performed computationally, where it is essential to use reliable and verified computational methods and models. In this context, the paper presents an approach for a finite element material model for wood. Thereby, the mechanical behavior of wood under compression loading is the focus of the development work. Additionally, material orientation as well as strain rate, temperature and lateral constraint may vary. A large number of experiments, particularly compression tests, was designed and performed to establish an adequate experimental database for modeling verification. The experimental results enabled the derivation of necessary requirements: The material model has to take into account strain rate and temperature dependencies as well as the anisotropic characteristics of the material, a proper yield criterion, flow rule and hardening law. Such a material model is currently not available in established commercial dynamic finite element codes. Thus it is necessary to create a user-defined material model considering the mentioned requirements. A first step was done by determining a yield surface as well as detecting flow and hardening mechanisms from experimental force-deflection curves. In a next step the LS-DYNA material model MAT_75 was altered according to conclusions of former BAM development work, regarding the modeling of post-peak softening as a function of lateral constraint. Future research will contain the further development, implementation and verification of a material model for wood. T2 - 52nd INMM Annual meeting CY - Palm Desert, CA, USA DA - 17.07.2011 KW - Impact limiter KW - Material model wood KW - Transport package PY - 2011 SP - 1 EP - 8 AN - OPUS4-24236 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Robertson, Daniela A1 - Böhning, Martin A1 - Schröder, Hartmut A1 - Brummermann, K. A1 - Kaudinya, I. A1 - Saathoff, F. T1 - Möglichkeiten der Abschätzung der Langzeitbeständigkeit von Kunststoffdichtungsbahnen (KDB) auf Polyolefinbasis für den Tunnelbau T2 - 12. Informations- und Vortragstagung über "Kunststoffe in der Geotechnik" N2 - Im Rahmen eines von der Bundesanstalt für Straßenwesen (BASt) initiierten Forschungsvorhabens (15.449/2007/ERB: „Prüfverfahren zur Beurteilung der Lebensdauer von Kunststoffdichtungsbahnen für Straßentunnel“) wurden anhand von Untersuchungen an Kunststoffdichtungsbahnen (KDB) auf Basis von Polyolefinwerkstoffen die Möglichkeiten der Beurteilung der oxidativen Langzeitbeständigkeit sondiert. Im Mittelpunkt stand die Erprobung des Autoklaventests in Anlehnung an DIN EN ISO 13438 (Methode C1/C2) an ausgewählten, für den Tunnelbau repräsentativen marktüblichen KDB-Produkten. Die Untersuchungen im Autoklaven bei erhöhten Temperaturen (60 °C, 70 °C und 80 °C) und Sauerstoffdrücken (11, 21 und 51 bar) wurden durch vergleichende Versuche im Wärmeschrank (Ofen) bei erhöhter Temperatur (85 °C) in Anlehnung an DIN EN 14575 ergänzt. Die KDBProdukte wurden außerdem einer eingehenden Materialcharakterisierung (Zugprüfung, DMA, DSC) unterzogen. Weiterhin wurden Bauwerksdaten recherchiert und auf ihre Nutzbarkeit zur Bewertung und Prüfbarkeit der Langzeitbeständigkeit von KDB in Tunneln betrachtet. Ziel war auch, die Anwendbarkeit des bisher vorgeschlagenen Extrapolationsmodells zur Auswertung der Ergebnisse von Autoklaventests an im Tunnelbau marktüblichen Produkten für Nutzungsdauern über 25 Jahre zu überprüfen und zur Entwicklung eines geeigneten Prüfverfahrens beizutragen. Der Beitrag geht auf Ergebnisse des Vorhabens ein und zeigt erste Schlussfolgerungen und weiteren Untersuchungsbedarf auf. Die Ergebnisse werden in den „Empfehlungen zu Dichtungssystemen im Tunnelbau EAG-EDT“ des Arbeitskreises 5.1 „Kunststoffe in der Geotechnik und im Wasserbau“ berücksichtigt, deren 2. Auflage in Vorbereitung ist. Aspekte des thermischen Verhaltens der eingesetzten Werkstoffe sowie mögliche Anpassungen der Prüfrandbedingungen für die Autoklaventests werden ergänzt und Hinweise zur Interpretation von Prüfergebnissen gegeben. Außerdem wurden inzwischen ausgehend von den Ergebnissen des Forschungsvorhabens erste Autoklaven-Ringversuche in drei Prüfinstitutionen initiiert. T2 - 12. Informations- und Vortragstagung über "Kunststoffe in der Geotechnik" CY - Munich, Germany DA - 03.03.2011 KW - Kunststoffdichtungsbahnen auf Polyolefinbasis KW - Oxidative Langzeitbeständigkeit KW - Autoklaventest - beschleunigte Alterung KW - DSC KW - DMA PY - 2011 SN - 978-3-940476-26-5 IS - Geotechnik Sonderheft 2011 SP - 35 EP - 42 AN - OPUS4-24399 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sabel, Martin A1 - Feldmann, Ines A1 - Bücker, Michael A1 - Gorbushina, Anna T1 - SEM investigations of biofilms: Environmental-SEM vs. sample drying and low temperature SEM T2 - Microscopy Conference 2011 T2 - Microscopy Conference 2011 CY - Kiel, Germany DA - 2011-08-28 PY - 2011 AN - OPUS4-24378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Jaunich, Matthias A1 - Braun, Ulrike A1 - Stark, Wolfgang T1 - Curing behavior of EVA-based encapsulants for photovoltaic applications T2 - 11. Schwarzheider Kunststoffkolloquium T2 - 11. Schwarzheider Kunststoffkolloquium CY - Schwarzheide, Germany DA - 2011-09-21 PY - 2011 AN - OPUS4-24936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reimund, Verena A1 - Pelkner, Matthias A1 - Neubauer, Andreas A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc T1 - Automatische Detektion von Rissen in Stahlbauteilen unter Verwendung von GMR-Sensoren bei der magnetischen Streuflussprüfung T2 - DGZfP-Jahrestagung 2011 N2 - GMR-Sensor Arrays ermöglichen eine örtlich hoch aufgelöste Messung magnetischer Streufeldamplituden an Stahlbauteilen, bei der abhängig von der Größe der zu prüfenden Oberfläche erhebliche Datenmengen erzeugt werden. Eine automatische Detektion von Rissen kann anschließend mittels digitaler Bildverarbeitung erreicht werden, welche hauptsächlich auf einer Kantenerkennung basiert. Diese wurde anhand einer Magnetometer-Messung getestet, die an einem zylindersymmetrischem Bauteil mit funkenerosiv eingebrachten Rissen geringer Tiefe durchgeführt wurde. Die erzielte Selektion der Defekte wird für eine angestrebte Rekonstruktion der Defektgeometrie benötigt. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Deutschland DA - 30.05.2011 KW - GMR-Sensor KW - Streuflussprüfung PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-253451 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (Mo.3.C.4) SP - 1 EP - 7 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25345 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Pelkner, Matthias A1 - Neubauer, Andreas A1 - Blome, Mark A1 - Reimund, Verena A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc ED - Chady, T. ED - Gratkowski, S. ED - Takagi, T. ED - Udpa, S.S. T1 - Flux leakage measurements for defect characterization using NDT adapted GMR sensors T2 - Electromagnetic nondestructive evaluation (XIV) N2 - High-precision magnetic field sensors are of increasing interest in non destructive testing (NDT). In particular GMR-sensors (giant magneto resistance) are qualified because of their high sensitivity, high signal-to-noise ratio and high spatial resolution. We performed magnetic flux leakage measurements of artificial cracks with a GMR-gradiometer and a 3-axes GMR-magnetometer. Cracks of a depth of 44 μm still could be detected with a sufficient high signal-to-noise ratio. A semi-analytic magnetic dipole model was used for swiftly predicting magnetic stray fields. The reliable reconstruction based on measurements of artificial rectangular-shaped defects is demonstrated. KW - GMR KW - NDT KW - Magnetic flux leakage KW - Reconstruction PY - 2011 SN - 978-1-60750-749-9 SN - 1383-7281 N1 - Serientitel: Studies in applied electromagnetics and mechanics – Series title: Studies in applied electromagnetics and mechanics VL - 35 SP - 217 EP - 224 PB - IOS Press CY - Amsterdam, The Netherlands AN - OPUS4-25374 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina A1 - Trela, Christiane A1 - Kind, Thomas A1 - Gil, Magdalena A1 - Wöstmann, Jens T1 - Detection of granite landmarks in soil with GPR T2 - GPR 2010 - 13th International conference on ground penetrating radar (Proceedings) T2 - 13th International conference on ground penetrating radar CY - Lecce, Italy DA - 2010-06-21 KW - Ground penetrating radar (GPR) KW - Granite landmarks PY - 2010 SN - 978-1-4244-4605-6 IS - IEEE Catalog Number: CFP10538 SP - 478 EP - 482 AN - OPUS4-25323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Berger, Anka A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Krause, Ulrich T1 - Leitfaden zur Brandvermeidung durch Selbstentzündung bei der Lagerung von Recycling- und Deponiestoffen KW - Selbstentzündungsgefährdung KW - Recycling- und Deponiestoffe KW - Brandschutzmaßnahmen PY - 2010 SP - 1 EP - 16 PB - MUGV Brandenburg - Referat Presse- und Öffentlichkeitsarbeit CY - Potsdam AN - OPUS4-25391 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Chinta, P.K. A1 - Mayer, K. A1 - Effner, Ute A1 - Müller, Sabine T1 - NDT of Structural Timber Members by means of 3D Ultrasonic Imaging Techniques and Modelling T2 - NDTMS 2011 T2 - NDTMS 2011 CY - Istanbul, Turkey DA - 2011-05-15 PY - 2011 AN - OPUS4-24801 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Baytekin, H. Tarik A1 - Oran, Umut A1 - Theisen, J. A1 - Schmidt, Martin A1 - Unger, Wolfgang ED - Weckenmann, A. T1 - Validierte Messverfahren für die nichtgeometrische Größe Hydrophilie - Anwendung in der Mikrofluidik T2 - Abschlussbericht DFG Schwerpunktprogramm 1159 - Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen T2 - Abschlusskolloquium DFG Schwerpunktprogramm 1159 - Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen CY - Erlangen, Deutschland DA - 2010-10-06 PY - 2011 SN - 978-3-8440-0358-1 SN - 0945-0769 SP - 163 EP - 172 PB - Shaker Verlag GmbH AN - OPUS4-24827 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, U. T1 - Validierung von formalkinetischen Größen aus der adiabatischen Warmlagerung KW - Selbstentzündung KW - Adiabate Warmlagerung KW - Reaktionskinetik PY - 2011 SP - 1 EP - 57 ET - Abschlussbericht Forschungsvorhaben AN - OPUS4-25012 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Fischer, C. A1 - Schmidt, Martin A1 - Meyer, U. A1 - Barth, Uli A1 - Drebenstedt, C. A1 - Wuttke, M. W. T1 - Innovative Technologien für die Erkundung, Löschung und Beobachtung von Kohlebränden - Phase B - N2 - Aufbauend auf den Erkenntnissen der Phase A, die sich auf das grundlegende Verständnis von Kohlebränden, sowie der Voraussetzung und des prinzipiellen Ablaufs der physikalischchemischen Brandprozesse konzentriert haben, erfolgte in Phase B eine Fokussierung auf Methoden zur Vermeidung von Kohlebränden, sowie der Löschung und Überwachung von Kohlebrandzonen, um einen Beitrag zur Verminderung von C02-Emissionen und zum Erhalt der nutzbaren Energieressourcen leisten zu können. Diese Arbeiten erfolgten insbesondere mit Bezug zu den „Clean Development Mechanisms“ (CDM), die im Rahmen des Kyoto-Protokolls entwickelt worden sind. Eine Zertifizierung von Löschaktivitäten im Rahmen des Kyoto-Protokolls setzt dabei eine nachvollziehbare Ermittlung der kohlebrandbezogenen C02-Emissionen und eine belastbare Abschätzung der durch die Löschung verringerten Emissionsmengen voraus. Wesentliche Arbeiten konzentrierten sich auf die Entwicklung von Verfahren, die eine solche Abschätzung gewährleisten können. Dazu wurden unterschiedliche Ansätze entwickelt und anhand der erhobenen Felddaten überprüft. Die untersuchten Ansätze konzentrierten sich dabei auf Verfahren, die eine Ermittlung des vorhandenen Kohlevolumens, die Erfassung der emittierten Gase und die durch die Kohlebrände verursachten Temperaturanomalien an der Tagesoberfläche ermöglichen. Die direkten Arbeiten zum Thema CDM wurden dabei in einem Arbeitspaket unter Federführung der BGR gebündelt. Die deutsche Initiative zur Erforschung der Kohlenbrände in der V.R. China leistete zweifelsfrei signifikante Beiträge zu den oben genannten Zielen. Durch die inventiven Ansätze im Bereich der Brandbewältigung konnte darüber hinaus auch in Teilen die ökonomischen Chancen für ein Engagement deutscher Unternehmen aufgezeigt werden. KW - Kohlebrände KW - Brandbekämpfung KW - Branderkundung PY - 2011 DO - https://doi.org/10.2314/GBV:664529690 SP - 1 EP - 39 AN - OPUS4-25013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina T1 - Spektrale Induzierte Polarisation (SIP) – Anisotropienachweis an Holz T2 - 68. Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) T2 - 68. Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) CY - Freiberg, Germany DA - 2008-03-03 PY - 2008 AN - OPUS4-25017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Interlaboraty test 2010/11 "EN 15188:2007 - Self-Ignition temperature" - Präsentation der Zwischenergebnisse Oktober 2011 - T2 - ProcessNet-Arbeitsausschuss "Sicherheitstechnische Kenngrößen" T2 - ProcessNet-Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2011-10-26 PY - 2011 AN - OPUS4-25045 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Raedel, Martina A1 - Sabel, Martin A1 - Bücker, Michael A1 - Unger, Brita ED - Meeks, N. ED - Cartwright, C. ED - Meek, A. ED - Mongiatti, A. T1 - ESEM-EDX analyses for the characterisation and reproduction of nineteenth-century gold tesserae T2 - Historical technology, materials and conservation - SEM and microanalysis N2 - Environmental scanning electron microscopy with energy dispersive X-ray analysis (ESEM-EDX) is a versatile working tool for the examination of gold tesserae as well as for the selection of suitable materials for their reproduction. In this paper, the ESEM-EDX analyses of original gold tesserae and their damage types are presented. These analytical results form the basis for further calculations of glass properties and experiments. These calculated values enable the determination of the relevant glass properties and allow us to choose the appropriate type of modern glass for further experiments. Subsequent experiments convert this knowledge into practice. By comparing the analytical results from the original glasses and the replicas the accuracy and precision will be shown. KW - Gold mosaics KW - Tesserae KW - ESEM-EDX KW - Glass analyses KW - Damage mechanism PY - 2012 SN - 978-1-904982-65-4 SP - 107 EP - 113 PB - Archetype publications Ltd. AN - OPUS4-27641 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hölck, Ole A1 - Böhning, Martin A1 - Heuchel, M. A1 - Siegert, M.R. A1 - Hofmann, D. T1 - Gas sorption isotherms in swelling glassy polymers - detailed atomistic simulations JF - Journal of membrane science N2 - Detailed atomistic simulations were carried out for swelling polymer/gas systems related to experimental sorption and dilation data for CO2 and CH4 in three glassy polymers (polysulfone PSU, the polyimide 6FDA-TrMPD, and a polymer of intrinsic microporosity PIM-1) at 308 K (35 °C) and pressures up to 50 bar. Corresponding experiments were performed with a gravimetric sorption balance and a dilatometer based on a capacitance distance sensor. For each polymer/gas system molecular packing models were prepared and equilibrated for two reference states: the pure polymer is taken as reference for the respective 'unswollen' state and similarly the state of the highest penetrant pressure reached in the corresponding experiment is taken to represent the 'swollen' state. Models for the latter were constructed in agreement with experimental data (pressure, temperature, gas concentration and volume dilation). Concentration–pressure isotherms of each polymer/gas system were obtained using Grand Canonical Monte Carlo (GCMC) simulations for both reference states (depleted of gas molecules), which are in good agreement with the experimental data in the respective pressure range. As expected these isotherms – due to the simulation technique used, merely based on hole-filling in a static host matrix – do not represent the sorption behavior over a broader range of gas pressures which may involve significant structural rearrangements as well as swelling and relaxational phenomena. Nevertheless, a linear combination of the two GCMC-isotherms allows the interpolation in order to describe the nonlinear gas sorption in the glassy polymers under investigation covering the penetrant pressure range between the reference states in good agreement with the experimental results. KW - Gas sorption KW - Dilation KW - Molecular modeling KW - Polysulfone KW - Polyimide KW - Polymer of intrinsic microporosity (PIM-1) PY - 2013 DO - https://doi.org/10.1016/j.memsci.2012.10.023 SN - 0376-7388 SN - 1873-3123 VL - 428 SP - 523 EP - 532 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-27599 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eisenacher, Germar A1 - Scheidemann, Robert A1 - Neumann, Martin A1 - Droste, Bernhard A1 - Völzke, Holger T1 - Dynamic crushing characteristics of spruce wood under large deformations JF - Wood science and technology N2 - An extensive series of large deformation crushing tests with spruce wood specimens was conducted. Material orientation, lateral constraint and loading rate were varied. Regarding material orientation, a reduction in the softening effect and the general force level was observed with a higher fiber-load angle. A comparison with characteristics gained by application of Hankinson's formula showed discrepancies in compression strength and the beginning of the hardening effect. Lateral constraint of the specimens caused a multiaxial stress state in the specimens, which was quantified with the applied measuring method. Further, a higher force level compared to specimens without lateral constraint and significant hardening effect at large deformations resulted. Thus, the influence of a multiaxial stress state on the force level could be determined. An increase in the loading rate led to higher force levels at any displacement value and material orientation. KW - Crushing test KW - Dynamic crushing characteristics KW - Spruce wood KW - Lateral constraint KW - Multiaxial stress state KW - Hankinson's formula PY - 2013 DO - https://doi.org/10.1007/s00226-012-0508-5 SN - 0043-7719 SN - 1432-5225 VL - 47 IS - 2 SP - 369 EP - 380 PB - Springer CY - Berlin AN - OPUS4-27743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Fettig, Ina A1 - Raspe, Tina A1 - Piechotta, Christian T1 - Experimental studies on the effect of fire accelerant during living room fires T2 - Fire and materials 2013 - 13th International conference and exhibition (Proceedings) N2 - The influence of fire accelerants on the fire behavior during living room fires was experimentally investigated by performing 5 different room fire scenarios. During the tests flre-technological quantities were determined as well as chemical-analytical studies were carried out. The focus was on the detection of smoke gases and the proof of used fire accelerants. The evaluation of traceable fire accelerants and the reconstruction of the fire development are based on a precise Chemical analysis of the combustion products. In this work an innovative methodology was developed to combine available analyticai techniques to draw conclusions from solid, liquid and gaseous fire residues about the fire process. Each ofthe fire rooms was equipped with the same living room inventory. The location and amount of fire accelerant (a mixture of diesel/gasoline) differed in 4 of 5 tests. Orte room fire experiment was carried out without fire accelerant. The following fire technological characteristics were determined during the room fire experiments: mass loss (of the complete room), temperatures (at several locations in the room), heat release and smoke gas emission (measured at three different locations: in the chimney, in the fire room and at the door opening). While the smoke gases were analysed by using Fourier Transform Infrared spectroscopy, the fire residues and swipe samples (particles) were examined by Headspace-Solid Phase Microextraction- Gaschromatography-Mass spectrometry. These procedures make it possible to detect low concentrations of volatile components of the fire accelerants. The Chemical analyticai results of the fire accelerant detection are presented. T2 - Fire and materials 2013 - 13th International conference and exhibition CY - San Francisco, CA, USA DA - 28.01.2013 KW - Accelerant KW - Chemical analysis KW - Toxicity PY - 2013 SP - 729 EP - 743 PB - Interscience Communications CY - London, UK AN - OPUS4-27708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Meyer-Scherf, Ronald A1 - Kluge, Martin A1 - Schröder, Volkmar A1 - Spoormaker, T. T1 - Self-ignition of tetrafluoroethylene induced by rapid valve opening in small diameter pipes JF - Journal of loss prevention in the process industries N2 - This work investigates the ignition of tetrafluoroethylene induced by the adiabatic compression that can arise by activating a high speed valve separating two portions of a pipeline with a high pressure difference. In the tests performed the high pressure zone contained tetrafluoroethylene at pressures between 15 and 30 bar. For the low pressure zone, experiments with nitrogen, air and tetrafluoroethylene were carried out. The pressure range in the low pressure zone was comprised between 0.05 and 1 bar. The pipe diameters analyzed were 15 and 20 mm. For the analyzed geometries, special conditions were required in order to reach reproducible ignitions, namely air at temperatures of at least 105 °C had to be present in the compression pipe. Furthermore, a minimum length of the compression pipe had to be used. The current work describes the experimental setup employed for the tests and discusses the achieved results. Numerical simulations were performed in order to clarify unexpected findings. KW - Tetrafluoroethylene KW - Decomposition KW - Self-ignition KW - Adiabatic compression PY - 2013 DO - https://doi.org/10.1016/j.jlp.2012.10.006 SN - 0950-4230 SN - 1873-3352 N1 - Geburtsname von Meyer-Scherf, Ronald: Meyer, R. - Birth name of Meyer-Scherf, Ronald: Meyer, R. VL - 26 IS - 1 SP - 177 EP - 185 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-27685 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werrel, Martin A1 - Deubel, Jan A1 - Hofmann-Böllinghaus, Anja A1 - Antonatus, E. A1 - Krüger, Simone T1 - Use ande Benefit of a Controlled-atmosphere Cone Calorimeter T2 - Fire and Materials Conference 2013 T2 - Fire and Materials Conference 2013 CY - San Francisco, CA, USA DA - 2013-01-28 PY - 2013 AN - OPUS4-27689 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rodrigues, M. A1 - Schreiner, M. A1 - Melcher, M. A1 - Guerra, M. A1 - Salomon, J. A1 - Radtke, Martin A1 - Alram, M. A1 - Schindel, N. T1 - Analysis of the hoard of Becin using X-ray-based techniques JF - X-ray spectrometry N2 - Four hundred and sixteen silver coins stemming from the Ottoman Empire (16th and 17th centuries) were analyzed to confirm the fineness of the coinage as well as to study the provenance of the alloy used for the coins. As most of the coins showed the typical green patina on their surfaces due to corrosion processes that have led to the depletion of copper in the near surface domains of the silver coins in comparison to their core composition, small samples had to be taken, embedded in synthetic resin, and cross sectioned to investigate the true-heart metal composition. µ-synchrotron micro X-ray fluorescence analysis and µ-proton-induced X-ray emission were applied to determine the silver contents as well as the minor and trace elements. The type of the alloy was investigated as well as if coins minted in different locations demonstrated homogeneous traits concerning the predominant impurities (Au and Bi), which could suggest a common ore. Finally, energy-dispersive microanalysis in a scanning electron microscope was applied to study the homogeneity/heterogeneity of the coins and the presence of surface enrichments and to explain differences between the µ-synchrotron micro X-ray fluorescence analysis and µ-proton-induced X-ray emission measurements concerning the main component. In general, the silver content of the analyzed specimen varies between 90 and 95%. These outcomes have not supported the historical interpretations, which predict that during the period studied, a debasement of approximately 44% of the silver content of the coins should have occurred. KW - SRXRF KW - Silber KW - BAMline PY - 2012 DO - https://doi.org/10.1002/xrs.2415 SN - 0049-8246 VL - 41 IS - 6 SP - 416 EP - 424 PB - Wiley CY - Chichester AN - OPUS4-27723 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rigo, E. A1 - Rosner, Martin A1 - Vogl, Jochen T1 - Herkunftsbestimmung von Kalken T2 - GDCh-Fachtagung Bauchemie 2011 N2 - Analytische Methoden zur Feststellung der Herkunft eines Baustoffes sind bislang kaum entwickelt worden. In Deutschland gibt es eine Reihe von Kalkiagerstätten, die in unterschiedlichen geologischen Formationen Kalk oder Dolomit enthalten. Das unterschiedliche geologische Alter von Kalken sowie die ursprüngliche mineralische Zusammensetzung und die geologische Historie spiegeln sich im 87Sr/88Sr-lsotopenverhältnis weder. Mittels der Thermionen-Massenspektrometrie kann dieses Verhältnis ermittelt und somit zur Herkunftsbestimmung eines Kalkes herangezogen werden. T2 - GDCh-Fachtagung Bauchemie 2011 CY - Hamburg-Harburg, Deutschland DA - 06.10.2011 KW - Isotopenverhältnisse KW - Kalke KW - Herkunft KW - TIMS PY - 2011 SN - 978-3-936028-69-0 N1 - Serientitel: GDCh-Monographien – Series title: GDCh-Monographien VL - 44 SP - 282 EP - 284 CY - Frankfurt/M. AN - OPUS4-25576 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone T1 - Vitiated Cone Calorimeter - eiin Modell zur szenarioabhängigen Beurteilung von Brandgefahren? T2 - Doktorandentag des Lehrstuhles Anlagentechnik und Anlagensicherheit der OvGU CY - Magdeburg, Germany DA - 09.12.2011 PY - 2011 AN - OPUS4-25569 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Holtappels, Kai A1 - Kluge, Martin A1 - Ferrero, Fabio A1 - Schmidtchen, Ulrich T1 - Acetylenflaschen im Feuer JF - Technische Sicherheit - Brandschutz N2 - Acetylen ist eines der wichtigsten technischen Gase und findet insbesondere Anwendung beim Schweißen und Schneiden verschiedener Werkstoffe. Damit Acetylen in entsprechenden Mengen vor Ort zur Verfügung gestellt werden kann, wird es in Druckgasbehälter abgefüllt. Im Falle eines Brandes stehen Acetylenflaschen im Verdacht, jederzeit – auch nach Löschen des Feuers – aufgrund einer möglicherweise initiierten Zerfallsreaktion zu bersten. Um insbesondere Personenschäden zu vermeiden, evakuieren und sperren die Rettungskräfte einen Sicherheitsbereich mit einem Radius von mindestens 200 m um die verdächtige Flasche ab. Gleichzeitig wird umgehend mit der Kühlung der Flasche begonnen. Wie lange muss aber eine Acetylenflasche gekühlt werden, bis sie sicher abtransportiert werden kann, und wie lange muss der Sicherheitsbereich mit dem großen Radius aufrecht erhalten werden? Diesen Fragen ist die BAM in den vergangenen Jahren im Rahmen verschiedener Untersuchungen und Projekte nachgegangen. KW - Acetylen KW - Druckbehälter KW - Poröses Material KW - Lösungsmittel PY - 2012 SN - 2191-0073 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 2 IS - 4 SP - 19 EP - 25 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-25902 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisenacher, Germar A1 - Kuschke, Christian A1 - Schubert, Sven A1 - Neumann, Martin A1 - Sterthaus, Jens A1 - Nitz, Thilo A1 - Wille, Frank T1 - Moisture content of wood - influence on mechanical behavior of wood filled impact limiter and importance for quality surveillance during manufacturing T2 - RAMTRANSPORT 2012 - 9th International Conference on the Radioactive Materials Transport and Storage (Proceedings) N2 - The moisture content of wood is known to have a significant influence on the wood’s mechanical properties. Using wood as an energy absorber in impact limiter of packages for the transport of radioactive material, it is of particu-lar importance to ensure the moisture content and thus relevant mechanical properties to be in specified limits. The paper surveys the influence of wood moisture content on the mechanical properties of wood. Different measuring methods are discussed with respect to in-situ applicability, accuracy and effort. The results of an experimental ana-lysis of the accuracy of hand-held moisture meters using the electrical resistance method are discussed. Conclu-sions are drawn regarding the measurement of moisture content of wood upon delivery as well as of complete im-pact limiter assemblies. Requirements for quality surveillance during manufacturing of wood filled impact limiter are derived and it is exemplified how to meet them. Construction, manufacturing and inspection of impact limiter encapsulation with regard to leak-tightness are addressed. T2 - RAMTRANSPORT 2012 - 9th International Conference on the Radioactive Materials Transport and Storage CY - London, UK DA - 2012-05-22 KW - Mechanical behavior of wood KW - Moisture content KW - Impact limiter PY - 2012 IS - 4.4 RAM 30 SP - 1 EP - 11 AN - OPUS4-26241 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogl, Jochen A1 - Rosner, Martin T1 - Production and certification of a unique set of isotope and delta reference materials for Boron isotope determination in geochemical, environmental and industrial materials JF - Geostandards and geoanalytical research N2 - Isotopic reference materials are essential to enable reliable and comparable isotope data. In the case of boron only a very limited number of such materials is available, thus preventing adequate quality control of measurement results and validation of analytical procedures. To address this situation a unique set of two boron isotope reference materials (ERM-AE102a and -AE104a) and three offset δ11B reference materials (ERM-AE120, -AE121 and -AE122) were produced and certified. The present article describes the production and certification procedure in detail. The isotopic composition of all the materials was adjusted by mixing boron parent solutions enriched in 10B or 11B with a boron parent solution having a natural isotopic composition under full gravimetric control. All parent solutions were analysed for their boron concentration as well as their boron isotopic composition by thermal ionisation mass spectrometry (TIMS) using isotope dilution as the calibration technique. For all five reference materials the isotopic composition obtained on the basis of the gravimetric data agreed very well with the isotopic composition obtained from different TIMS techniques. Stability and homogeneity studies that were performed showed no significant influence on the isotopic composition or on the related uncertainties. The three reference materials ERM-AE120, ERM-AE121 and ERM-AE122 are the first reference materials with natural δ11B values not equal to 0‰. The certified δ11B values are -20.2‰ for ERM-AE120, 19.9‰ for ERM-AE121 and 39.7‰ for ERM-AE122, each with an expanded uncertainty (k = 2) of 0.6‰. These materials were produced to cover about three-quarters of the known natural boron isotope variation. The 10B enriched isotope reference materials ERM-AE102a and ERM-AE104a were produced for industrial applications utilising 10B for neutron shielding purposes. The certified 10B isotope abundances are 0.29995 for ERM-AE102a and 0.31488 for ERM-AE104a with expanded uncertainties (k = 2) of 0.00027 and 0.00028, respectively. Together with the formerly certified ERM-AE101 and ERM-AE103 a unique set of four isotope reference materials and three offset δ11B reference materials for boron isotope determination are now available from European Reference Materials. KW - Boron isotope variations KW - Delta-scale KW - Stable isotopes KW - Isotope reference materials KW - Delta reference materials KW - Metrology in chemistry KW - Absolute isotope abundance PY - 2012 DO - https://doi.org/10.1111/j.1751-908X.2011.00136.x SN - 1639-4488 SN - 1751-908X VL - 36 IS - 2 SP - 161 EP - 175 PB - Blackwell CY - Oxford AN - OPUS4-26260 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Sterthaus, Jens A1 - Schubert, Sven A1 - Eisenacher, Germar A1 - Wille, Frank T1 - Material characterization and modeling within safety analysis of packages for transport of radioactive material T2 - PVP2012 - Proceedings of the ASME 2012 Pressure vessels & piping division conference T2 - ASME 2012 Pressure vessels & piping division conference CY - Toronto, Ontario, Canada DA - 2012-07-15 PY - 2012 SP - PVP2012-78297, 1-6 PB - American Society of Mechanical Engineers CY - New York AN - OPUS4-26271 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Würth, Christian A1 - Resch-Genger, Ute A1 - Hyppänen, I. A1 - Soukka, T. T1 - Upconversion nanoparticles as new class of fluorescent reporters – Tools to characterize their signal-relevant optical properties T2 - Biosensor Symposium T2 - Biosensor Symposium CY - Wildau, Germany DA - 2013-03-10 PY - 2013 AN - OPUS4-27809 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Streicher, Doreen A1 - Wiggenhauser, Herbert A1 - Haardt, P. A1 - Holst, R. T1 - Non-destructive Testing of a Post tensioned Concrete Bridge Applying an Automated Measuring System T2 - Structural Materials Technology (SMT), NDE/NDT for Highways and Bridges 2004 T2 - Structural Materials Technology (SMT), NDE/NDT for Highways and Bridges 2004 CY - Buffalo, NY, USA DA - 2004-09-14 PY - 2004 AN - OPUS4-5213 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Rieck, C. A1 - Hillemeier, B. T1 - Materialuntersuchung an Holz mit niederfrequenter Ultraschall-Echotechnik T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2004 N2 - Kurzfassung Die Anwendung niederfrequenter Ultraschall-Echotechnik mit Longitudinal- und Transversalwellen für die Materialuntersuchung von Holzbauteilen wird beschrieben. Weiterhin wird der Einfluss der Holzfasern auf die Schallgeschwindigkeiten und Oberflächenwellen an Hand von Messergebnissen aufgezeigt. Die Leistungsfähigkeit des Ultraschall-Echoverfahrens an ungeschädigten Holzkörpern und Körpern mit eingebrachten Bohrungen in Faserrichtung (Kernfäulnissimulation) wird dargestellt. Es ist zudem möglich, bei koppelmittelfreier Ankopplung mit Transversalwellen indirekt Fäulnis von der ungeschädigten Bauteilseite aus zu orten. Als Referenzverfahren werden die Bohrwiderstandsmethode oder die Röntgendurchstrahlung eingesetzt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v87/v87.htm SN - 3-931381-55-2 SP - 1(?) EP - 9(?) PB - DGZfP CY - Berlin AN - OPUS4-5216 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Osterloh, Kurt A1 - Robbel, Joachim A1 - Krause, Martin A1 - Ewert, Uwe A1 - Hillemeier, B. T1 - Mobile Röntgenblitzröhren zum Auffinden von Holzschäden T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2004 N2 - In diesem Beitrag wird die Anwendung von Radiographiesystemen zum Auffinden von Holzschäden beschrieben. Die Anlage besteht aus einer mobilen Röntgenblitzröhre und einem digitalen Radiographiesystem mit Speicherfolie oder einem Flachdetektor. An Hand der durchgeführten Versuche an Laub- und Nadelbäumen sowie an Eichenbalken der Marienkirche der Lutherstadt- Wittenberg wird die Detektion innerer Schäden gezeigt. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p15/p15.htm SN - 3-931381-55-2 SP - 1(?) EP - 8(?) PB - DGZfP CY - Berlin AN - OPUS4-5217 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Haardt, P. A1 - Krause, Martin A1 - Streicher, Doreen A1 - Krause, H.-J. ED - Watanabe, E. ED - Frangopol, D. T1 - Scanning NDT-Methods for the Inspection of Highway Structures T2 - Bridge maintenance, safety, management and cost T2 - 2nd International Conference on Bridge Maintenance, Safety and Management CY - Kyoto, Japan DA - 2004-10-19 KW - ZfPBau KW - Ingenieurbauwerke KW - Automatisierung KW - Laserscanner KW - Ultraschallecho KW - Impuls Radar KW - Impact-Echo PY - 2004 SN - 90-5809-680-7 SP - 8 pages PB - Balkema CY - Leiden AN - OPUS4-5201 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Sven A1 - Hertwig, Andreas A1 - Lenzner, Matthias A1 - Krüger, Jörg A1 - Kautek, Wolfgang T1 - Spot-size dependence of the ablation threshold in dielectrics for femtosecond laser pulses JF - Applied physics A N2 - The multi-pulse ablation threshold of barium borosilicate glass was measured using 30-fs pulses of a high repetition rate (1 kHz) laser system. The threshold fluence was found to decrease with increasing beam radius ranging from 20 to 400 m. Two existing models are applied by considering thermal accumulation and point defects, respectively . PY - 2003 DO - https://doi.org/10.1007/s00339-003-2213-6 SN - 0947-8396 VL - 77 IS - 7 SP - 883 EP - 884 PB - Springer CY - Berlin AN - OPUS4-6317 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin ED - Becker, G. T1 - Untersuchungen über den Einfluß von Holzart, Grundschutzbehandlung und Nachschutzmittel auf die Eindringgeschwindigkeit von Nachschutzsalzen in den Mast T2 - Grundlegende Untersuchungen über den Nachschutz von Holzmasten mit Salzen PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 10 EP - 18 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7756 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Becker, Günther A1 - Gersonde, Martin ED - Becker, G. T1 - Quantitative Untersuchungen über das Eindringen von Fluorid aus Modellbandagen in Holzmaste T2 - Grundlegende Untersuchungen über den Nachschutz von Holzmasten mit Salzen PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 34 EP - 44 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7757 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin A1 - Becker, Günther ED - Becker, G. T1 - Untersuchungen über das Eindringen von Fluorid aus Handelsbandagen in Holzmaste T2 - Grundlegende Untersuchungen über den Nachschutz von Holzmasten mit Salzen PY - 1958 SN - 0417-2000 N1 - Serientitel: Mitteilungen der Deutschen Gesellschaft für Holzforschung – Series title: Mitteilungen der Deutschen Gesellschaft für Holzforschung IS - 42 SP - 44 EP - 53 PB - Dt. Gesellschaft f. Holzforschung CY - Stuttgart AN - OPUS4-7758 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin T1 - Die Prüfung poröser Massen für Azetylenflaschen im Hinblick auf die Grenzen ihrer Sichernden Wirkung JF - Arbeitsschutz PY - 1958 SN - 0003-7788 IS - 4 SP - 72 EP - 74 PB - Kohlhammer CY - Stuttgart AN - OPUS4-7775 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Becker, Günther T1 - Prüfung von Holzschutzmitteln für den Hochbau auf Wirksamkeit gegen Pilze an praxisgemäßen Holzproben ("Schwammkeller"- Versuche) - Testing of Wood Preservatives against Fungi in buildings under Semipractical Conditions JF - Holz als Roh- und Werkstoff PY - 1958 SN - 0018-3768 VL - 16 IS - 9 SP - 346 EP - 357 PB - Springer CY - Berlin AN - OPUS4-7762 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Über die Giftempfindlichkeit verschiedener Stämme holzzerstörender Pilze - The Sensitivity to Toxicity of Different Strains of Wood-Destroying Fungi JF - Holz als Roh- und Werkstoff PY - 1958 SN - 0018-3768 VL - 16 IS - 6 SP - 221 EP - 226 PB - Springer CY - Berlin AN - OPUS4-7763 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Untersuchungen über die Giftempfindlichkeit verschiedener Stämme von pilzarten der Gattungen Coniophora, Poria, merulius und Lentinus - I. Coniphora cereballa (Pers.) Duby JF - Holzforschung PY - 1958 SN - 0018-3830 SN - 1437-434X VL - 12 IS - 1 SP - 11 EP - 19 PB - De Gruyter CY - Berlin AN - OPUS4-7764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Untersuchungen über die Giftempfindlichkeit verschiedener Stämme von Pilzarten der Gattungen Coniophora, Poria, merulius und Lentinus - I. Coniphora cereballa (Pers.) Duby - Fortsetzung aus H. 1, Bd. 12 (1958) S.11-19 JF - Holzforschung PY - 1958 SN - 0018-3830 SN - 1437-434X VL - 12 IS - 3 SP - 73 EP - 83 PB - De Gruyter CY - Berlin AN - OPUS4-7765 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Untersuchungen über die Giftempfindlichkeit verschiedener Stämme von Pilzarten der Gattungen Coniophora, Poria, merulius und Lentinus - II. Poria Vailantii (D.C.) Fr. JF - Holzforschung PY - 1958 SN - 0018-3830 SN - 1437-434X VL - 12 IS - 4 SP - 104 EP - 114 PB - De Gruyter CY - Berlin AN - OPUS4-7766 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Untersuchungen über die Giftempfindlichkeit verschiedener Stämme von Pilzarten der Gattungen Coniophora, Poria, merulius und Lentinus - III. Merulius laccrymans (Wulf.) Fr. und Merulius silvester Falck JF - Holzforschung PY - 1958 SN - 0018-3830 SN - 1437-434X VL - 12 IS - 6 SP - 167 EP - 175 PB - De Gruyter CY - Berlin AN - OPUS4-7767 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hattwig, Martin ED - Becker, Gerhard Wilhelm T1 - Fortpflanzung von Flammen und Detonationen in Gemischen von Chlorkohlenwasserstoffdämpfen mit 02 und N2 T2 - Wissenschaftliche Berichte aus der Arbeit der Bundesanstalt für Materialprüfung (BAM) - Berlin PY - 1973 SP - 293 EP - 296 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9636 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin ED - Becker, Gerhard Wilhelm T1 - Untersuchungen über das Tränken von Bauholz durch Kurztauchen, Tauchen und Trogtränken T2 - Wissenschaftliche Berichte aus der Arbeit der Bundesanstalt für Materialprüfung (BAM) - Berlin PY - 1973 SP - 365 EP - 368 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9654 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gersonde, Martin A1 - Kerner-Gang, Waltraut ED - Becker, Gerhard Wilhelm T1 - Forschungsarbeiten über holzzerstörende Pilze T2 - Wissenschaftliche Berichte aus der Arbeit der Bundesanstalt für Materialprüfung (BAM) - Berlin PY - 1973 SP - 373 EP - 376 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-9656 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Aurich, Dietmar A1 - Martin, Erich T1 - Abhängigkeit der Streckgrenze und der Übergangstemperatur der Kerbschlagzähigkeit von der Abschreckalterung von baustählen im vergleich mit der Theorie des Sprödbruches JF - Archiv für das Eisenhüttenwesen PY - 1969 SN - 0003-8962 VL - 40 IS - 11 SP - 875 EP - 880 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-10721 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Erich A1 - Aurich, Dietmar T1 - Untersuchungen über die Korngrößenbestimmung in Blechen mit Ultraschall zur Entwicklung einer für die Praxis geeigneten zerstörungsfreien Meßmethode JF - Mitteilungen der Deutschen Forschungsgesellschaft für Blechverarbeitung und Oberflächenbehandlung PY - 1967 SN - 0720-0951 VL - 18 SP - 253 EP - 272 CY - Düsseldorf AN - OPUS4-10722 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Deppe, Hans-Joachim A1 - Gersonde, Martin T1 - Herstellung und Prüfung von geschützten Holzspanplatten JF - Material und Organismen = Materials and organisms = Matériaux et organismes / Beihefte PY - 1969 SN - 0375-9318 IS - 2 SP - 123 EP - 136 PB - Duncker & Humblot CY - Berlin AN - OPUS4-10788 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Böhning, Martin A1 - Goering, Harald A1 - Hao, Ning A1 - Schönhals, Andreas T1 - Polymer-based Nanocomposites - Particle Dispersion and Physical Properties T2 - Nanofair 2005 - New Ideas for Industry T2 - Nanofair 2005 CY - Dresden, Germany DA - 2005-11-29 KW - Polymerbasierte Nanokomposite PY - 2005 SN - 3-18-091920-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 1920 SP - 263 EP - 267 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-11589 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kohl, Christoph A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Wöstmann, Jens T1 - 2D- and 3D-visualisation of NDT-data using data fusion technique JF - Materials and structures N2 - Non-destructive testing (NDT) of concrete structures is performed using pulse-echo methods. According to the type of the applied waves it can be classified as acoustic (Impact-Echo, Ultrasonics) and electromagnetic methods (Radar). The results are visualised through different imaging processes. This work is performed in the frame of a research project promoted by Deutsche Forschungsgemeinschaft (FOR384). The objective of data fusion is to use the complementary information of the different methods. Radar can detect metallic reflectors in concrete (metallic ducts and concrete reinforcement) very well. This method is not able to locate defects behind these reflectors (injecting defects, defects behind close concrete reinforcement), because the electromagnetic waves are completely reflected at metals. The acoustic methods are able to compensate this deficit i.e. Acoustic waves can penetrate through metal. But acoustic waves in the ultrasonic range are completely reflected by air layers. Air layers have smaller influence on radar propagation, so that both methods complement each other. In order to be able to combine the NDT-data from several methods records at the same volume, the different data setsmodes of signals must be adapted. The ultrasonic and radar data have to be reconstructed with programs based on the Synthetic Aperture Focusing Technique (SAFT) before data fusion. Subsequently, a conversion of the data into a uniform format has to be carried out. This is a prerequisite in order to keep the data exchange between the project partners as simple as possible. After the data sets are imported and transferred into a common reference system, they can be processed with operations according to the purpose of the investigation. Results, which have been achieved in concrete test specimen with radar and ultrasonics, will be presented and will show the feasibility of the data fusion method. KW - Non-destructive testing KW - Radar KW - Ultrasonic KW - Impact-echo KW - Data fusion KW - SAFT PY - 2005 SN - 1359-5997 SN - 1871-6873 VL - 38 IS - 283 SP - 817 EP - 826 PB - Springer CY - Dordrecht AN - OPUS4-11591 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hertwig, Andreas A1 - Martin, S. A1 - Kautek, Wolfgang A1 - Krüger, Jörg ED - Maruray, L. T1 - Ultra-short Pulse Laser Safety - a Challenge to Materials Science T2 - Optical design and engineering II N2 - In this paper, safety-related experiments with ultra-short laser pulses (down to 30 fs) on various components (goggles, curtains) for laser protection are presented. The damage and failure behaviour of protective devices has been investigated dependent on practical conditions such as pulse duration, laser .uence, pulse number, and repetition rate. The e.ects of laser-irradiation on materials can be roughly divided into transient ones like laserinduced transmission (LIT) or short-lived colour centres and permanent damages like the stable colour centres and ablation. The former e.ects are particularly important for transparent devices like laser goggles. To obtain a complete overview on laser safety issues and the prevention of failure there are two important .elds of investigation: 1. the e.ects of laser radiation on human eyes and skin, and 2. on the possible protection materials. Both .elds have been addressed during the recently .nished German project SAFEST (safety aspects in femtosecond technology). The amount of safety data available in the ultrashort pulse region has been increased remarkably. This allows for a re-evaluation of known laser protection materials for this region of pulse durations and for the evaluation of new designs that promise high protection levels while being light-weight and convenient to use. T2 - Optical design and engineering II CY - Jena, Germany DA - 2005-09-13 PY - 2005 N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 5962 SP - 59622J-1 - 59622J-10 PB - SPIE CY - Bellingham AN - OPUS4-11593 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Jörg A1 - Lenzner, Matthias A1 - Martin, Sven A1 - Lenner, M. A1 - Spielmann, Ch. A1 - Fiedler, A. A1 - Kautek, Wolfgang T1 - Single- and multi-pulse femtosecond laser ablation of optical filter materials JF - Applied surface science N2 - Ablation experiments employing Ti:sapphire laser pulses with durations from 30 to 340 fs (centre wavelength 800 nm, repetition rate 1 kHz) were performed in air. Absorbing filters (Schott BG18 and BG36) served as targets. The direct focusing technique was used under single- and multi-pulse irradiation conditions. Ablation threshold fluences were determined from a semi-logarithmic plot of the ablation crater diameter versus laser fluence. The threshold fluence decreases for a shorter pulse duration and an increasing number of pulses. The multi-pulse ablation threshold fluences are similar to those of undoped glass material (~1 J cm-2). That means that the multi-pulse ablation threshold is independent on the doping level of the filters. For more than 100 pulses per spot and all pulse durations applied, the threshold fluence is practically constant. This leads to technically relevant ablation threshold values. KW - Damage KW - Femtosecond laser ablation KW - Filter KW - Incubation KW - Laser safety KW - Threshold PY - 2003 DO - https://doi.org/10.1016/S0169-4332(02)01389-2 SN - 0169-4332 SN - 1873-5584 VL - 208-209 SP - 233 EP - 237 PB - North-Holland CY - Amsterdam AN - OPUS4-11545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Sven A1 - Krüger, Jörg A1 - Hertwig, Andreas A1 - Fiedler, A. A1 - Kautek, Wolfgang T1 - Femtosecond laser interaction with protection materials JF - Applied surface science N2 - Textile, aluminium and polyethylene used as components in laser protection curtains were investigated with respect to their ablation behaviour. Employing 33-fs pulses (800 nm wavelength, 1 kHz repetition rate), ex situ geometrical measurements of the ablation cavities and in situ acoustic investigations with a microphone were performed to determine the ablation thresholds in the single- and multi-pulse cases. The acoustical method proved advantageous for complex surface morphologies and/or single laser pulse interactions. Incubation phenomena can be observed for all the materials studied. Technically relevant multi-pulse ablation thresholds are presented and are compared with the single-pulse (1-on-1) irradiation. KW - Damage KW - Femtosecond laser ablation KW - Laser safety KW - Threshold KW - Aluminium KW - Textile PY - 2003 DO - https://doi.org/10.1016/S0169-4332(02)01392-2 SN - 0169-4332 SN - 1873-5584 VL - 208-209 SP - 333 EP - 339 PB - North-Holland CY - Amsterdam AN - OPUS4-11546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hao, Ning A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Gas Transport Properties of Polymeric Nanocomposites Based on Polyhedral Oligomeric Silsesquioxanes JF - PMSE preprints PY - 2007 SN - 0743-0515 VL - 97 SP - 444 EP - 445 PB - Division of Polymeric Materials Science and Engineering, American Chemical Society CY - Washington, DC AN - OPUS4-15846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hao, Ning A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Structure Property Relationships of Polymeric Nanocomposites based on Polyhedral Oligomeric Silsesquioxanes JF - PMSE preprints PY - 2007 SN - 0743-0515 VL - 97 SP - 789 EP - 790 PB - Division of Polymeric Materials Science and Engineering, American Chemical Society CY - Washington, DC AN - OPUS4-15848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ritter, Martin A1 - Dziomba, T. A1 - Hemmleb, M. A1 - Koenders, L. A1 - Kranzmann, Axel T1 - A 3D-Calibration Method for the Quantitative SPM Measurement of Hardness Indenters JF - MAPAN - Journal of metrology society of India KW - 3D Calibration KW - SPM KW - Hardness Indenter PY - 2007 SN - 0970-3950 VL - 22 IS - 3 SP - 167 EP - 175 PB - Metrology Society of India CY - New Delhi AN - OPUS4-16357 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ritter, Martin A1 - Dziomba, T. A1 - Kranzmann, Axel A1 - Koenders, L. T1 - A landmark-based 3D calibration strategy for SPM JF - Measurement science and technology N2 - We present a new method for the complete three-dimensional (3D) calibration of scanning probe microscopes (SPM) and other high-resolution microscopes, e.g., scanning electron microscopes (SEM) and confocal laser scanning microscopes (CLSM), by applying a 3D micrometre-sized reference structure with the shape of a cascade slope-step pyramid. The 3D reference structure was produced by focused ion beam induced metal deposition. In contrast to pitch featured calibration procedures that require separate lateral and vertical reference standards such as gratings and step height structures, the new method includes the use of landmarks, which are well established in calibration and measurement tasks on a larger scale. However, the landmarks applied to the new 3D reference structures are of sub-micrometre size, the so-called 'nanomarkers'. The nanomarker coordinates are used for a geometrical calibration of the scanning process of SPM as well as of other instrument types such as SEM and CLSM. For that purpose, a parameter estimation routine involving three scale factors and three coupling factors has been developed that allows lateral and vertical calibration in only one sampling step. With this new calibration strategy, we are able to detect deviations of SPM lateral scaling errors as well as coupling effects causing, e.g., a lateral coordinate shift depending on the measured height position of the probe. KW - Scanning probe microscopy KW - Focused ion beam KW - Calibration KW - 3D standards KW - Parameter estimation KW - Spatial coupling KW - Distortions KW - SPM KW - Landmarks KW - Nanomarker KW - Coupling KW - 3D calibration PY - 2007 DO - https://doi.org/10.1088/0957-0233/18/2/S12 SN - 0957-0233 SN - 1361-6501 VL - 18 SP - 404 EP - 414 PB - IOP Publ. Ltd. CY - Bristol AN - OPUS4-16358 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ritter, Martin A1 - Dziomba, T. A1 - Xu, M. A1 - Koenders, L. A1 - Kranzmann, Axel T1 - Eine neue 3D Kalibrierstrategie für Mikro- und Nanomessverfahren T2 - VDI-Berichte / "Messtechnik für Mikro- und Nano-Engineering", Tagung 29.- 30.11.2006 T2 - Tagung "Messtechnik für Mikro- und Nano-Engineering" CY - Erlangen, Deutschland DA - 29.11.2006 KW - 3D Kalibrierung KW - Rastermikroskopie KW - Nanomarker PY - 2006 SN - 3-18-091950-7 IS - 1950 SP - 15 EP - 24 AN - OPUS4-16359 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin T1 - Analytical and numerical impact limiter calculation methods; recent research results T2 - BAM - U.S. NRC Meeting T2 - BAM - U.S. NRC Meeting CY - Rockville, MD, USA DA - 2007-10-18 PY - 2007 AN - OPUS4-16295 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wessling, S. A1 - Kessels, W. A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Investigating dynamic underground coal fires by means of numerical simulation JF - Geophysical journal international N2 - Uncontrolled burning or smoldering of coal seams, otherwise known as coal fires, represents a worldwide natural hazard. Efficient application of fire-fighting strategies and prevention of mining hazards require that the temporal evolution of fire propagation can be sufficiently precise predicted. A promising approach for the investigation of the temporal evolution is the numerical simulation of involved physical and chemical processes. In the context of the Sino-German Research Initiative ‘Innovative Technologies for Detection, Extinction and Prevention of Coal Fires in North China,’ a numerical model has been developed for simulating underground coal fires at large scales. The objective of such modelling is to investigate observables, like the fire propagation rate, with respect to the thermal and hydraulic parameters of adjacent rock. In the model, hydraulic, thermal and chemical processes are accounted for, with the last process complemented by laboratory experiments. Numerically, one key challenge in modelling coal fires is to circumvent the small time steps resulting from the resolution of fast reaction kinetics at high temperatures. In our model, this problem is solved by means of an ‘operator-splitting’ approach, in which transport and reactive processes of oxygen are independently calculated. At high temperatures, operator-splitting has the decisive advantage of allowing the global time step to be chosen according to oxygen transport, so that time-consuming simulation through the calculation of fast reaction kinetics is avoided. Also in this model, because oxygen distribution within a coal fire has been shown to remain constant over long periods, an additional extrapolation algorithm for the coal concentration has been applied. In this paper, we demonstrate that the operator-splitting approach is particularly suitable for investigating the influence of hydraulic parameters of adjacent rocks on coal fire propagation. A study shows that dynamic propagation strongly depends on permeability variations. For the assumed model, no fire exists for permeabilities k < 10-10 m2, whereas the fire propagation velocity ranges between 340 m a-1 for k = 10-8 m2, and drops to lower than 3 m a-1 for k = 5 × 10-10 m2. Additionally, strong temperature variations are observed for the permeability range 5 × 10-10 m2 < k < 10-8 m2. KW - Numerical solutions KW - Underground coal fires KW - Hydrothermal systems PY - 2008 DO - https://doi.org/10.1111/j.1365-246X.2007.03568.x SN - 0956-540X SN - 1365-246X VL - 172 IS - 1 SP - 439 EP - 454 PB - Blackwell CY - Oxford AN - OPUS4-16649 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Droste, Bernhard A1 - Wille, Frank T1 - Using Scale Model Impact Limiter in the Type Assessment of Transport Casks for Radioactive Material T2 - PATRAM 2007 - 15th International symposium on the packaging and transportation of radioactive materials (Proceedings) T2 - PATRAM 2007, 15th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Miami, Florida, USA DA - 2007-10-21 KW - Impact limiter KW - Similarity KW - Scaling PY - 2007 IS - (Abstract # 86) SP - 1 EP - 8 PB - Institute of Nuclear Materials Management AN - OPUS4-17495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Wille, Frank T1 - Estimation of cask deceleration and impact limiter deformation under 9m drop test conditions using the calculation tool “ImpactCalc” T2 - PATRAM 2007 - 15th International symposium on the packaging and transportation of radioactive materials (Proceedings) T2 - PATRAM 2007, 15th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Miami, Florida, USA DA - 2007-10-21 KW - Impact limiter KW - Calculation KW - Maximum deceleration KW - Maximum deformation PY - 2007 SP - 1 EP - 8 PB - Institute of Nuclear Materials Management AN - OPUS4-17496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard T1 - Scale model impact limiter in type assessment of radioactive material transport packages JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) KW - Impact limiter KW - Shock absorber KW - Scaling KW - Radioactive KW - Material KW - Transport KW - Cask PY - 2008 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 19 IS - 1 SP - 53 EP - 57 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-17498 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Martin A1 - Wille, Frank A1 - Ballheimer, Viktor T1 - Approximation of package deceleration and shock absorber deformation under 9 m drop test conditions using simplified numerical tool ImpactCalc JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) KW - Impact limiter KW - Calculation KW - Maximum deceleration KW - Maximum deformation PY - 2008 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 19 IS - 1 SP - 35 EP - 40 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-17499 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Hölck, Ole A1 - Heuchel, M. A1 - Hofmann, D. T1 - Characterization of gas sorption in glassy polymers combining experimental and molecular modeling techniques JF - PMSE preprints KW - Glassy Polymers KW - Gas Sorption KW - Molecular Modelling KW - Diffusion PY - 2008 SN - 0743-0515 VL - 98 SP - 875 EP - 876 PB - Division of Polymeric Materials Science and Engineering, American Chemical Society CY - Washington, DC AN - OPUS4-17485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Pohl, Rainer A1 - Heyder, R. A1 - Krull, R. A1 - Dilz, K. T1 - Früherkennung von Rollkontakt-Ermüdung (RCF) in Eisenbahnschienen T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung, 28.- 30.4.2008, St. Gallen, Schweiz N2 - Infolge der Betriebsbeanspruchung unterliegen Eisenbahnschienen an ihrer Fahrkante sog. Rollkontakt-Ermüdung. Diese entsteht bevorzugt in Bögen durch eine Kaltverformung des Schienenstahls und zeigt sich anfänglich in einer erhöhten Verfestigung des kontaktbeanspruchten Oberflächenbereichs. Im weiteren Verlauf entstehen zahlreiche, flach in das Schieneninnere verlaufende Risse –sog. Head Checks. Diese Risse neigen ab einem gewissen Stadium dazu, in das Innere der Schiene abzukippen, was im Endstadium zu einem Schienenbruch führen kann. Seit einigen Jahren wird in Deutschland bei der DB AG das Wirbelstromverfahren erfolgreich zur zerstörungsfreien Prüfung der Schädigungstiefe von Head Checks eingesetzt. Hiermit wurde u. A. angestrebt, zuverlässige Planungsgrößen für den Einsatz von Instandhaltungsmaßnahmen zu erhalten, durch deren gezielten Einsatz ein weiteres Risswachstum wirkungsvoll unterbunden werden kann. Bereits bei einem der ersten systematischen Einsätze der Wirbelstromprüfung an einer Bogenstrecke mit hohem Betriebsaufkommen wurde auffällig, dass die Ermüdungsrisse nicht gleichmäßig entlang des Bogens verteilt auftraten, sondern sich auf kurze Distanzen Anhäufungen von Rissbefall mit intakten, unbefallenen Abschnitten abwechselten. Solch wellenförmiges Auftreten von Head Checks wurde auch in den nachfolgenden Prüfergebnissen der Wirbelstromprüfung vielerorts beobachtet. Aus der Literatur war bekannt, dass sich die Ermüdungsrisse bevorzugt in verfestigten Materialzonen bilden. Mit Hilfe von Härtemessungen konnte an verlegten und befahrenen Schienen gezeigt werden, dass die unbefallenen Zonen etwa die Grundhärte des Schienenwerkstoffes aufwiesen, während die mit Ermüdungsrissen befallenen Zonen um ca. 10 – 25% erhöhte Härtewerte aufwiesen. Die Wirbelstromprüfung reagiert sehr empfindlich auf Veränderungen der Materialeigenschaften. Somit lassen sich Verfestigungen der o. g. Art leicht auch ohne jedes Vorhandensein von Ermüdungsrissen bereits nachweisen. Im Zuge einer längerfristigen Beobachtung einer neu gebauten Strecke konnte herausgefunden werden, dass sich nach einer gewissen Betriebszeit wellenförmig verteilte Zonen mit Prüfsignalen, die auf Verfestigungen schließen lassen auftraten. Im weiteren zeitlichen Ablauf bildeten sich Ermüdungsrisse tatsächlich in den vorher bestimmten Stellen mit Verfestigung, während die Zonen ohne diese Prüfsignale weitgehend rissfrei blieben. Diese Ergebnisse zeigen, dass die Wirbelstromprüfung das Potential besitzt, mögliche Orte der Entstehung von Ermüdungsrissen in einem extrem frühzeitigen Stadium nachzuweisen. T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Head Checks KW - Eisenbahnschiene KW - Kaltverfestigung PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Mi.3.A.1.) SP - 501 EP - 510 AN - OPUS4-17982 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dey, Anika A1 - Pohl, Rainer A1 - Thomas, Hans-Martin A1 - Meierhofer, R. T1 - Optimierte Schieneninstandhaltung durch Wirbelstromprüfung T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung, 28.- 30.4.2008, St. Gallen, Schweiz N2 - Betriebsbedingte Oberflächenschäden an Schienen, insbesondere rissartige Ungänzen wie Head Checks, Squats und Belgrospis spielen bei der Gewährleistung der Sicherheit des Fahrbetriebes eine zunehmend wichtige Rolle. Bei ungehindertem Wachstum können diese Schäden bis zum Schienenbruch führen. Um dies zu verhindern, werden diese Oberflächenschädigungen im Anfangsstadium durch Abarbeiten der Schienen beseitigt. Häufig werden hierfür Schienenschleifzüge eingesetzt. Für die effektive Planung dieser Instandhaltungsmaßnahmen wurde ein Wirbelstromprüfsystem entwickelt, welches in der Lage ist, speziell für den Fehlertyp Head Checks, eine Risstiefenbestimmung durchzuführen. Dieses wird seit einiger Zeit bei der manuellen Prüfung (WPG – Wirbelstromprüfgerät) und bei der Prüfung mit Schienenprüfzügen erfolgreich eingesetzt. Das Wirbelstromprüfsystem wurde so modifiziert, dass es in einem Schleifzug der Firma SPENO INTERNATIONAL SA integriert werden konnte. Hierüber wurde bereits berichtet (u.a. DACH-Tagung 2004 in Salzburg; ECNDT 2006 Berlin). Der Betrieb im Schleifzug ist für die Weiterentwicklung des Prüfsystems von herausgehobener Bedeutung, da anhand des tatsächlich erzeugten Materialabtrages eine laufende Verifikation der Prüfaussagen erfolgen kann. Für die Instandhaltungsmaßnahme ergibt sich durch das integrierte Prüfsystem der Vorteil, während bzw. unmittelbar nach Abschluss der Arbeiten eine objektive Dokumentation über das erzielte Schleifergebnis erstellen zu können. Inzwischen sind einige Schleifzüge mit dem System ausgerüstet worden. Anhand von Ergebnissen ausgewählter Schleifeinsätze werden die Aspekte für die Optimierung der Schieneninstandhaltungsmaßnahmen, sowie auch für die Weiterentwicklung des Prüfsystems selbst vorgestellt. T2 - DACH-Jahrestagung 2008 - Zerstörungsfreie Materialprüfung, ZfP in Forschung, Entwicklung und Anwendung CY - St. Gallen, Schweiz DA - 2008-04-28 KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Head Checks KW - Eisenbahnschiene KW - Schieneninstandhaltung PY - 2008 SN - 978-3-940283-09-2 IS - DGZfP-BB-113 (Poster P7) SP - 618 EP - 622 AN - OPUS4-17987 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Beutel, R. A1 - Reinhardt, H.-W. A1 - Grosse, C.U. A1 - Glaubitt, A. A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Algernon, Daniel A1 - Wiggenhauser, Herbert A1 - Schickert, M. T1 - Comparative performance tests and validation of NDT methods for concrete testing JF - Journal of nondestructive evaluation N2 - Validation of non-destructive testing methods is necessary to create a common basis where different systems can be compared and their applications and limitations be identified. This can be achieved through comparing the measurements taken by several systems used for a common diagnostic purpose under practical but controlled testing conditions. Well-designed small and large laboratory or field specimens promise such conditions. The special concrete specimen (LCS) at BAM was constructed for validation purposes, in particular, to be used for evaluating the performance of echo methods. The thickness of the specimen is varying and it contains carefully designed built-in faults, such as voids, honeycombs and tendon ducts with various degrees of grouting defects. Since the geometry and condition of the defects are known, it can be used to compare the performance of radar, ultrasonic, impact-echo. The research was conducted within the Research group FOR384, sponsored by the German Research Society DFG. KW - Performance demonstration KW - Non-destructive testing KW - Concrete KW - Radar KW - Ultrasound KW - Impact-echo PY - 2008 DO - https://doi.org/10.1007/s10921-008-0037-1 SN - 0195-9298 SN - 1573-4862 VL - 27 IS - 1-3 SP - 59 EP - 65 PB - Plenum Press CY - New York, NY AN - OPUS4-17925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mayer, K. A1 - Langenberg, K.-J. A1 - Krause, Martin A1 - Milmann, Boris A1 - Mielentz, Frank T1 - Characterization of reflector types by phase-sensitive ultrasonic data processing and imaging JF - Journal of nondestructive evaluation N2 - Ultrasonic and radar imaging techniques are limited in resolution by the wavelength in the material, yet information beyond those limits is hidden in complex frequency dependent reflection coefficients. The analysis of the phase of complex reflection coefficients together with the properties of imaging algorithms can help to characterize and to classify indications of defects in concrete buildings. This paper describes a method to extract phase information from measurements and SAFT reconstructed images. The influencing factors like material properties, transducer characteristics, and imaging algorithms based on Born or Physical Optics approximations are elaborated. Simulated and experimental results are briefly discussed. KW - NDT KW - Imaging KW - Flaw characterization KW - Tendon ducts KW - Phase analysis KW - Ultrasonic echo KW - SAFT KW - FT-SAFT KW - EFIT-modeling KW - Modellierung KW - EFIT KW - Spannbeton KW - Ultraschallecho KW - Spannkanäle KW - Verpressfehler KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfP-Bau PY - 2008 DO - https://doi.org/10.1007/s10921-008-0035-3 SN - 0195-9298 SN - 1573-4862 VL - 27 IS - 1-3 SP - 35 EP - 45 PB - Plenum Press CY - New York, NY AN - OPUS4-17926 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Martin A1 - Milmann, Boris A1 - Mielentz, Frank A1 - Streicher, Doreen A1 - Redmer, Bernhard A1 - Mayer, K. A1 - Langenberg, K.-J. A1 - Schickert, M. T1 - Ultrasonic Imaging Methods for Investigation of Post-tensioned Concrete Structures: A Study of Interfaces at Artificial Grouting Faults and Its Verification JF - Journal of nondestructive evaluation N2 - This paper presents the progress of successful location of grouting faults in tendon ducts with ultrasonic imaging. The examples were obtained in the research group FOR 384 funded by DFG (German Research Foundation). The co-operation of experimental research and modeling allowed imaging and identification of grouted and ungrouted areas of tendon ducts (including strands) in a large test specimen (40 m²). In addition to the criteria for indicating grouting faults in post-tensioned ducts known until now the phase evaluation of reflected ultrasonic pulses is described. Experiments and modeling of wave propagation are presented for reflections at metal plates in concrete (thickness range 0.5 mm to 40 mm) and for tendon ducts including strands. The main part of the progress was achieved by automated measurements using dry contact transducers, 3D-SAFT reconstruction including phase evaluation and modeling considering wave propagation for typical elastic parameters and exact experimental site conditions. The results for shear waves as well as for pressure waves are compared in the frequency range from 50 kHz to 120 kHz. KW - Non-destructive testing KW - Tendons KW - Prestressed concrete bridges KW - Ultrasonic echo KW - Reconstruction calculation KW - 3D-SAFT KW - Modeling (EFIT) PY - 2008 DO - https://doi.org/10.1007/s10921-008-0033-5 SN - 0195-9298 SN - 1573-4862 VL - 27 IS - 1-3 SP - 67 EP - 82 PB - Plenum Press CY - New York, NY AN - OPUS4-17922 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank T1 - Simulation of crushing of wood filled impact limiter of packages for radioactive material T2 - 9th International Conference on Computational Structures Technology (CST) 2008 T2 - 9th International Conference on Computational Structures Technology (CST) 2008 CY - Athens, Greece DA - 2008-09-01 PY - 2008 AN - OPUS4-17911 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Robertson, Daniela A1 - Schröder, Hartmut T1 - Autoclave testing - a new approach for the evaluation of oxidative long-term resistance of geosynthetics T2 - 4th European Geosynthetics Conference T2 - 4th European Geosynthetics Conference CY - Edinburgh, Scotland DA - 2008-09-07 PY - 2008 AN - OPUS4-18295 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Noll, Matthias A1 - Schmidt, Bernd A1 - Malow, Marcus A1 - Schmidt, Martin T1 - Experimentelle und numerische Analyse des Selbstentzündungsverhalten von Holzhalden T2 - 9. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Brandvermeidung KW - Biomasse KW - Lagerung KW - Schüttgüter KW - Selbstentzündung PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 21 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Milmann, Boris A1 - Krause, Martin A1 - Mielentz, Frank A1 - Mayer, K. T1 - Ultraschallecho-Verfahren für Spannbeton: Signifikanter Nachweis von Verpressfehlern mit Phasenauswertung T2 - Praktische Anwendungen Zerstörungsfreier Prüfungen und Zukunftsaufgaben - Tagungsband der Fachtagung Bauwerksdiagnose 2008 T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2008-02-21 KW - Ultraschallecho KW - Spannbeton KW - Verpressfehler KW - Modellierung KW - Polarimetrische Abbildungsverfahren PY - 2008 SN - 978-3-940283-08-5 N1 - Serientitel: Berichtsband der Deutschen Gesellschaft für Zerstörungsfreie Prüfung – Series title: Berichtsband der Deutschen Gesellschaft für Zerstörungsfreie Prüfung IS - 112 SP - 1 EP - 11 (Beitrag 11) PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-18280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Saliwan Neumann, Romeo A1 - Dörfel, Ilona A1 - Griepentrog, Michael T1 - Sol-gel derived alumina layers on nickel-base superalloy Inconel-718 (IN-718) JF - Thin solid films N2 - Modified Yoldas sols can be used to prepare crack-free well adherent layers on different substrate materials such as soda–lime glass, corundum and metal (IN-718). These layers having thicknesses of 0.6 µm are strain tolerant and withstand thermal cycling between 810 °C and room temperature. Introducing alpha-Al2O3 filler particles into modified Yoldas sols allows the preparation of thicker layers of 1.6 µm, which as well can be thermally cycled without noticeable delaminations. Chemical bonding seems to be the predominant layer bonding mechanism. KW - Sol-gel KW - Alumosol KW - Filler particles KW - Inconel-718 KW - Scanning electron microscopy PY - 2008 DO - https://doi.org/10.1016/j.tsf.2008.08.124 SN - 0040-6090 VL - 517 IS - 2 SP - 786 EP - 792 PB - Elsevier CY - Amsterdam AN - OPUS4-18263 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wiggenhauser, Herbert A1 - Gardei, André A1 - Kohl, Christoph A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Streicher, Doreen ED - Watanabe, E. ED - Frangopol, D. T1 - Development and Application of Echo-Methods for NDE of Post Tensioned Concrete Bridges T2 - Bridge maintenance, safety, management and cost T2 - 2nd International Conference on Bridge Maintenance, Safety and Management CY - Kyoto, Japan DA - 2004-10-19 KW - ZfPBau KW - Spannbetonbrücken KW - Ultraschall Echo KW - Impact-Echo KW - Impuls Radar PY - 2004 SN - 90-5809-680-7 PB - Balkema CY - Leiden AN - OPUS4-4739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin T1 - Wasser und Wasserstoff in Quarzgläsern T2 - Betriebskolloquium der Fa. Heraeus T2 - Betriebskolloquium der Fa. Heraeus CY - Hanau, Germany DA - 2002-11-14 PY - 2002 AN - OPUS4-6196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Martin A1 - Schobbert, Helmut A1 - Böllinghaus, Thomas T1 - Hot Cracking Resistance of Laser and Hybrid Welded Austenitic Steels T2 - Trends in Welding Research, Callaway Gardens T2 - Trends in Welding Research, Callaway Gardens CY - Pine Mountain, GA, USA DA - 2002-04-16 PY - 2002 AN - OPUS4-7176 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Chung, Jae Un A1 - Kalinka, Gerhard ED - Possart, W. T1 - Mapping Epoxy Interphases T2 - Adhesion : current research and applications T2 - 7th European Conference on Adhesion ; 7th EURADH CY - Freiberg, Germany DA - 2004-09-01 KW - Interface KW - Interphase KW - Epoxy KW - Copper (Cu) KW - Polyvinylpyrrolidone (PVP) KW - AFM/SFM KW - DSI KW - EDX/EDS KW - Stiffness KW - Modulus KW - Interdiffusion PY - 2005 SN - 3-527-31263-3 VL - 7 SP - 103 EP - 123 PB - Wiley-VCH CY - Weinheim AN - OPUS4-10894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ritter, Martin A1 - Hemmleb, Matthias A1 - Hohenberg, H. ED - Luhmann, T. T1 - Kalibrierung unterschiedlicher 3D-Messmethoden mit einem vielseitig einsetzbaren Kalibrierobjekt T2 - Photogrammetrie - Laserscanning - optische 3D-Messtechnik T2 - 4. Oldenburger 3D-Tage CY - Oldenburg, Deutschland DA - 2005-02-02 KW - 3D-Mikroskopie KW - AFM KW - SEM KW - CLSM KW - Kalibrierung PY - 2005 UR - http://www.m2c-calibration.com/veroeff/O3D2005_Ritter.pdf SN - 3-87907-420-8 VL - 4 SP - 66 EP - 73 PB - Wichmann CY - Heidelberg AN - OPUS4-11474 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Dörfel, Ilona T1 - Oxidation protection of metals by sol-gel derived alumina coatings T2 - EUROMAT 2007 T2 - EUROMAT 2007 CY - Nuremberg, Germany DA - 2007-09-10 PY - 2007 AN - OPUS4-15493 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Zacher, Gerhard A1 - Wöstmann, Jens A1 - Krause, Martin A1 - Streicher, Doreen A1 - Milmann, Boris T1 - Bewertung von Radar- und Ultraschalldaten mit Hilfe der Datenfusion T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2007 T2 - DGZfP-Jahrestagung 2007 CY - Fürth, Deutschland DA - 2007-05-14 KW - ZfPBau KW - Stahlbeton KW - Spannbetonbrücken KW - Bewehrung KW - Spannglieder KW - Radar KW - Ultraschall KW - Datenfusion PY - 2007 SN - 978-3-931381-98-1 SP - 1 EP - 8 PB - DGZfP CY - Berlin AN - OPUS4-15991 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard T1 - Using scale model impact limiter in the type assessment of transport casks for radioactive material T2 - PATRAM 2007 The 15th International Symposium on the Packaging and Transportation of Radioactive Material T2 - PATRAM 2007 The 15th International Symposium on the Packaging and Transportation of Radioactive Material CY - Miami, FL, USA DA - 2007-10-21 PY - 2007 AN - OPUS4-16013 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Ballheimer, Viktor T1 - Estimation of cask deceleration and impact limiter deformation under 9m drop test conditions using the calculation tool "Impactcalc" T2 - PATRAM 2007 The 15th International Symposium on the Packaging and Transportation of Radioactive Material T2 - PATRAM 2007 The 15th International Symposium on the Packaging and Transportation of Radioactive Material CY - Miami, FL, USA DA - 2007-10-21 PY - 2007 AN - OPUS4-16015 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hao, Ning A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Dielectric Properties of Nanocomposites Based on Polystyrene and Polyhedral Oligomeric Phenethyl-Silsesquioxanes JF - Macromolecules N2 - Nanocomposites were prepared by solution blending of polyhedral oligomeric silsesquioxane with phenethyl substituents (PhenethylPOSS) into polystyrene (PS). The prepared materials were investigated by dielectric spectroscopy, differential scanning calorimetry (DSC), and density measurements. Additional FTIR investigations were carried out. Pure polystyrene shows two relaxation processes, an intermediate β*-process at lower and the α-relaxation at higher temperatures, the latter corresponding to segmental dynamics (dynamic glass transition). The molecular assignment of the β*-process needs further investigation. PhenethylPOSS can be incorporated into PS up to about 40 wt % without any indication of phase separation. With increasing PhenethylPOSS content, the α-relaxation of the composites shifts to lower temperatures and the loss peak broadens. Thus, the main effect of the nanofiller in the polystyrene matrix is to enhance the segmental dynamics, i.e., plasticization. The incorporation of approximately 40 wt % (approximately 5 mol %) PhenethylPOSS shifts the glass transition temperature Tg by 50 K to lower temperatures. The obtained results for polystyrene are discussed together with those reported recently for polycarbonate where a phase-separated morphology is observed for higher concentrations of PhenethylPOSS. The different behavior of PhenethylPOSS in polystyrene and polycarbonate is interpreted in terms of the different interaction of the phenyl rings within the POSS substituents with the phenyl rings of the polymers. For polystyrene, the interaction is stronger than for polycarbonate which probably leads to the enhanced miscibility of PhenethylPOSS into polystyrene. A detailed analysis of the temperature dependence of the dielectric relaxation strengths points also to additional interactions in the nanocomposites when compared to pure polystyrene. The broadening of the loss peak with increasing concentration is discussed in the framework of composition fluctuations. KW - Polyhedral oligomeric silsesquioxane (POSS) KW - Polymer-based nanocomposites KW - Broadband dielectric spectroscopy KW - Polystyrene PY - 2007 DO - https://doi.org/10.1021/ma071777g SN - 0024-9297 SN - 1520-5835 VL - 40 IS - 26 SP - 9672 EP - 9679 PB - American Chemical Society CY - Washington, DC AN - OPUS4-16492 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Einflussgrößen auf die Selbstentzündung von Schüttgütern und Stäuben T2 - Sichere Handhabung brennbarer Stäube 2008 T2 - Sichere Handhabung brennbarer Stäube : Tagung CY - Nürnberg, Deutschland DA - 2008-03-11 KW - Selbstentzündung KW - Schüttgüter KW - Kohle KW - Biomasse PY - 2008 SN - 978-3-18-092024-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2024 SP - 201 EP - 216 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Lohrer, Christian T1 - Numerische Simulation von Selbstentzündungsvorgängen, Modell und Praxisbeispiele T2 - Sichere Handhabung brennbarer Stäube 2008 KW - Selbstentzündung KW - Schüttgüter KW - Kohle KW - Biomasse KW - Numerische Simulation PY - 2008 SN - 978-3-18-092024-5 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2024 SP - 315 EP - 328 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-17189 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hölck, Ole A1 - Heuchel, M. A1 - Hofmann, D. T1 - Characterization of gas sorption in glassy polymers combining experimental and molecular modeling techniques T2 - American Chemical Society (ACS) Spring Meeting T2 - American Chemical Society (ACS) Spring Meeting CY - New Orleans, LA, USA DA - 2008-04-06 PY - 2008 AN - OPUS4-17402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Guerra, M. F. A1 - Radtke, Martin A1 - Reiche, I. A1 - Riesemeier, Heinrich A1 - Strub, Erik T1 - Analysis of trace elements in gold alloys by SR-XRF at high energy at the BAMline JF - Nuclear instruments and methods in physics research B N2 - Measuring in a non-destructive way the characteristic trace elements of the metal allows following the circulation of gold in the past. The aim of this work is to probe the possibilities of X-ray fluorescence with high energy synchrotron radiation (SR-XRF) at the BAMline at BESSY II to determine the concentration of Pt in ancient gold alloys. A HP-Ge detector was used to measure the Pt K-lines excited with an incident energy of 79.5 keV. Data processing was done by subtraction of a Pt free gold standard spectrum from the spectrum of the sample. Depending on the sample composition, the MDL ranges between 40 and 90 ppm. The first results obtained for a small set of gold alloys of different thickness, size and composition showed that high energy SR-XRF is a significant method for the non-destructive determination of Pt in gold. KW - SR-XRF KW - Gold KW - Provenancing KW - Trace elements PY - 2008 DO - https://doi.org/10.1016/j.nimb.2008.03.008 SN - 0168-583X SN - 1872-9584 VL - 266 IS - 10 SP - 2334 EP - 2338 PB - Elsevier CY - Amsterdam AN - OPUS4-17735 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Bugoi, R. A1 - Cojocaru, V. A1 - Radtke, Martin A1 - Calligaro, T. A1 - Salomon, J. A1 - Pichon, L. A1 - Röhrs, S. A1 - Ceccato, D. A1 - Oberländer-Târnoveanu, E. T1 - Micro-SR-XRF and micro-PIXE studies for archaeological gold identification - The case of Carpathian (Transylvanian) gold and of Dacian bracelets JF - Nuclear instruments and methods in physics research B N2 - Trace-elements are more significant for provenancing archaeological metallic artifacts than the main components. For gold, the most promising elements are platinum group elements (PGE), Sn, Te, Sb, Hg and Pb. Several small fragments of natural Transylvanian gold – placer and primary – were studied by using micro-PIXE technique at the Legnaro National Laboratory AN2000 microbeam facility, Italy and at the AGLAE accelerator, C2RMF, Paris, France and by using micro synchrotron radiation X-ray fluorescence (micro-SR-XRF) at BESSY synchrotron, Berlin, Germany. The goal of the study was to identify the trace-elements, especially Sn, Sb and Te. A spectacular application to five Dacian gold bracelets authentication is presented (Sn and Sb traces). KW - Micro-PIXE KW - Micro-SR-XRF KW - Gold KW - Dacian bracelets KW - Transylvania PY - 2008 DO - https://doi.org/10.1016/j.nimb.2008.03.054 SN - 0168-583X SN - 1872-9584 VL - 266 IS - 10 SP - 2325 EP - 2328 PB - Elsevier CY - Amsterdam AN - OPUS4-17736 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hao, Ning A1 - Böhning, Martin A1 - Wohlrab, Sebastian A1 - Schönhals, Andreas T1 - Polymer Based Nanocomposites with PhenethylPOSS as Nanofilter Investigated by Dielectric Spectroscopy and Gas Transport Measurements JF - Macromolecular symposia N2 - Polyhedral oligomeric silsesquioxane with phenethyl substituents (PhenethylPOSS) as nanofiller was incorporated within Poly(bisphenol A carbonate) (PBAC) as matrix. Dielectric spectroscopy proved an almost complete miscibility of PhenethylPOSS up to 7 wt. %. At higher concentrations phase separation yields composites with a PBAC-rich matrix and POSS-rich domains which posses well shaped interfaces. The nanocomposites were also investigated with respect to their gas transport behaviour. An increase of the gas permeability was found at higher PhenethylPOSS concentrations, which is due to the phase separated structure. KW - Dielectric measurements KW - Nanocomposites KW - Permeation KW - Polycarbonates KW - Polyhedral oligomeric silsesquioxanes PY - 2008 DO - https://doi.org/10.1002/masy.200850712 SN - 1022-1360 SN - 0258-0322 SN - 1521-3900 VL - 267 IS - 1 SP - 69 EP - 73 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-17751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosner, Martin A1 - Wiedenbeck, M. A1 - Ludwig, T. T1 - Composition-induced variations in SIMS instrumental mass fractionation during boron isotope ratio measurements of silicate glasses JF - Geostandards and geoanalytical research N2 - An analytical artefact is reported here related to differences in instrumental mass fractionation between NIST SRM glasses and natural geological glasses during SIMS boron isotope determinations. The data presented demonstrated an average 3.4‰ difference between the NIST glasses and natural basaltic to rhyolitic glasses mainly in terms of their sputtering-induced fractionation of boron isotopes. As no matrix effect was found among basaltic to rhyolitic glasses, instrumental mass fractionation of most natural glass samples can be corrected by using appropriate glass reference materials. In order to confirm the existence of the compositionally induced variations in boron SIMS instrumental mass bias, the observed offset in SIMS instrumental mass bias has been independently reproduced in two laboratories and the phenomenon has been found to be stable over a period of more than one year. This study highlights the need for a close match between the chemical composition of the reference material and the samples being investigated. Nous montrons l'existence d'un artefact analytique reliéà différents fractionnements de masse instrumentaux, observés sur les verres NIST SRM et des verres naturels durant des mesures des isotopes de bore par SIMS. Les données montrent une différence d'environ 3.4‰ entre les verres NIST et les verres naturels, de composition variant de basaltique à rhyolitique, en termes de fractionnement des isotopes du bore principalement induit par le phénomène de dispersion. Comme aucun effet de matrice n'a été observé entre les verres basaltiques et les verres rhyolitiques, le fractionnement de masse instrumental de la plupart des verres naturels peut être corrigé en utilisant des verres de références appropriés. Dans le but de confirmer l'existence de biais de masse liéà la composition lors de mesure du bore par SIMS, nous avons reproduit indépendamment le décalage observé entre deux laboratoires et ce phénomène s'est révélé stable sur une période de plus d'un an. Cette étude met en lumière le besoin d'ajuster précisément les compositions chimiques des matériaux de référence et des échantillons à analyser. KW - Boron isotopes KW - SIMS KW - Matrix effect KW - Glass reference materials KW - Instrumental mass fractionation KW - Isotope du bore KW - Effet de matrice KW - Matériaux vitreux de référence KW - Fractionnement de masse instrumental PY - 2008 DO - https://doi.org/10.1111/j.1751-908X.2008.00875.x SN - 1639-4488 SN - 1751-908X VL - 32 IS - 1 SP - 27 EP - 38 PB - Blackwell CY - Oxford AN - OPUS4-17783 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin A1 - Nofz, Marianne T1 - Hochtemperatur Oxidationsschutz von INCONEL-718 T2 - Hannover Messe T2 - Hannover Messe CY - Hanover, Germany DA - 2008-04-25 PY - 2008 AN - OPUS4-18097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin A1 - Nofz, Marianne T1 - Keramische Schichten für den Oxidationsschutz T2 - EuroMold 2008 T2 - EuroMold 2008 CY - Frankfurt am Main, Germany DA - 2008-12-03 PY - 2008 AN - OPUS4-18099 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Pohl, Rainer T1 - Früherkennung von Rollkontaktermüdung (RCF) in Eisenbahnschienen T2 - Delta Test Tagung 2008 T2 - Delta Test Tagung 2008 CY - Celle, Germany DA - 2008-11-12 PY - 2008 AN - OPUS4-18169 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Retzlaff, J. A1 - Bronstein, Z. A1 - Müller-Rochholz, J. A1 - Böhning, Martin A1 - Robertson, Daniela A1 - Schröder, Hartmut T1 - Oxidative resistance of geosynthetics: practical aspects and developments of testing at elevated temperature and oxygen pressure T2 - EuroGeo4, 4th European Geosynthetics Conference, September 7-10, 2008, Edinburgh, UK N2 - Service life of geosynthetics made of polyolefin materials is mainly limited by oxidative degradation. Durability of polyolefin products depend on formulation, morphology resulting from manufacturing, design and particularly on the antioxidants used. Although the fundamental oxidative reactions are known, the complex effect of geosynthetic characteristics and external influences mean that durability assessments require practical tests. The assessment of oxidative durability involves exposure to accelerating conditions as well as the material characterisation with respect to the state of stabilisation and/or degradation (e.g. by tensile testing and/or oxidation induction time). The autoclave test developed by BAM for durability assessments of polyolefin geosynthetics is based on the simultaneous application of moderately elevated temperatures (up to 80 degrees Celsius) and elevated oxygen pressures (up to 5.0 MPa) in combination with a surrounding aqueous medium. Thus this test method provides several advantages in comparison to conventional oven testing, especially with respect to test duration, impact of surrounding environment and the potential to differentiate and rank oxidative resistance between products of very different dimensions (surface/volume) and stabilisation. In view of the increasing demand for durability assessments of geosynthetic products with lifetimes significantly exceeding 25 years, the contribution is focused on practical aspects concerning implementation and optimisation of test procedures, conditions and evaluation of results. Furthermore, advanced approaches based on multiple exposure conditions will also be included and corresponding calculations of expected service life in typical applications will be evaluated with respect to significance and repeatability. Thereby involved standards and recommendations - such as EN ISO 13438, Part C or EAG-EDT - are considered. T2 - EuroGeo4, 4th European Geosynthetics Conference CY - Edinburgh, UK DA - 2008-09-07 KW - Ageing KW - Degradation KW - HDPE KW - Laboratory test KW - Oxidation KW - Polypropylene PY - 2008 IS - Paper 178 SP - 1 EP - 4 AN - OPUS4-18423 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Robertson, Daniela A1 - Schröder, Hartmut T1 - Autoclave testing: a new approach for the evaluation of oxidative long-term resistance of geosynthetics T2 - EuroGeo4, 4th European Geosynthetics Conference, September 7-10, 2008, Edinburgh, UK N2 - Oxidative long time resistance is essential for many polyolefin based products, especially if repair or exchange is not possible as encountered in many building and geotechnical applications. Current regulations and recommendations for geosynthetics cover mainly the needs of a maximum lifetime of 25 years, though many applications require longer lifetimes up to 100 years and more. Reliable testing of the long time oxidation resistance is complicated by the complex interplay of physicochemical processes and reactions in combination with the need of relatively short testing durations, usually not exceeding 12 months. Thus for conventional atmospheric oven testing, the use of temperatures higher than 100 °C is inevitable, making conclusive Arrhenius extrapolations often questionable. Practical assessments of oxidative durability consist of exposures under accelerated ageing conditions with subsequent characterization of exposed material samples with respect to their residual stabilization and/or their mechanical properties. The autoclave test combines exposures at elevated temperatures with higher oxygen pressures and is performed with material samples immersed in a well defined aqueous medium representing critical environments in geosynthetic applications and including extraction of additives. Under these conditions meaningful results can be obtained within reasonable testing durations at only moderately elevated temperatures up to 80 °C. Application of different physicochemical methods, such as tensile testing, OIT /HP-OIT and analysis of residual antioxidant content (ICOT), in order to determine the time dependent degradation behaviour, reveal valuable information about mechanisms and effectiveness of the used antioxidants. Corresponding results for exposures at different temperatures and oxygen pressures are the basis for a 3D-extrapolation in order to estimate the expected service life. Different empirical models are presented and discussed with respect to their practical impact. T2 - EuroGeo4, 4th European Geosynthetics Conference CY - Edinburgh, UK DA - 2008-09-07 KW - Ageing KW - Degradation KW - Geotextiles KW - Polyolefin KW - Polypropylene KW - Oxidative resistance KW - Lifetime prediction PY - 2008 IS - Paper 143 SP - 1 EP - 8 AN - OPUS4-18424 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Retzlaff, J. A1 - Müller-Rochholz, J. A1 - Klapperich, H. A1 - Böhning, Martin T1 - The behaviour of geosynthetics under cyclic load T2 - EuroGeo4, 4th European Geosynthetics Conference, September 7-10, 2008, Edinburgh, UK N2 - Whenever geosynthetics are used to reinforce or stabilise infrastructural elements such as road- and railways, bridge abutments, run- and taxiways on airports or to protect coastlines of canals and other steep slopes they may be exposed to cyclic loads. Therefore, a reduction factor for dynamic effects on the geosynthetic tensile strength has been included into the calculation of the Long Term Design Strength (LTDS). An approach to assess the behaviour of geosynthetics is to adopt Woehler- or Smith graphs and Haigh-diagrams for polymers. This is because an endurance limit for polymers, which defines an infinite life under a defined cyclic load, has not been seen so far. A huge amount of mechanical testing is needed to predict the behaviour of geosynthetics against this particular background. To reduce these efforts while getting an indication of the cyclic effect on geosynthetics, a combined method of mechanical and chemical analysis has been developed. The pure tensile strength tests to determine the residual strength after cyclic stress has been amended by IR-spectroscopy and Differential Scanning Calorimetry (DSC). In this context the chain change model of PET has been proven as valid for cyclic loads as well, which helps to define the endurance limit of materials made out of PET. For polyolefins such as PP and PE, a limit for the maximum alternating load has been identified at the point of the stress strain graph where the actual and the numerical stress of a material diverge from each other. Cyclic tensile strength tests have been carried out in a hydraulic test frame. The test parameters have been set to simulate the service life of a railway bed trafficked by high speed trains (ICE). T2 - EuroGeo4, 4th European Geosynthetics Conference CY - Edinburgh, UK DA - 2008-09-07 KW - Cyclic load KW - Dynamic loads KW - Laboratory test KW - Reduction factor KW - Reinforcement KW - Stiffness PY - 2008 IS - Paper 179 SP - 1 EP - 7 AN - OPUS4-18425 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Validierung von formalkinetischen Größen aus der adiabaten Warmlagerung T2 - 9. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 9. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2008-11-06 KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz PY - 2008 SN - 978-3-89746-099-7 SP - 1 EP - 3 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-18427 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dey, Anika A1 - Thomas, Hans-Martin A1 - Pohl, Rainer T1 - The important role of eddy current testing in railway track maintenance T2 - 17th World Conference on Non-Destructive Testing (Proceedings) T2 - 17th World Conference on Non-Destructive Testing CY - Shanghai, China DA - 2008-10-25 KW - Eddy current testing KW - Rolling contact fatigue KW - Head checking KW - Rail maintenance KW - Grinding train PY - 2008 IS - Paper 393 SP - 1 EP - 4 PB - International Committee for Non-Destructive Testing CY - Shanghai AN - OPUS4-18433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ritter, Martin A1 - Kranzmann, Axel T1 - Analysis of multimodal 3D microscopy measurements T2 - EMC T2 - EMC CY - Aachen, Germany DA - 2008-09-01 PY - 2008 AN - OPUS4-18437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Heyder, R. A1 - Krull, R. T1 - Prüfverfahren zur Früherkennung von Rollkontaktermüdung in Schienen JF - Der Eisenbahningenieur N2 - Ständige Betriebsbeanspruchungen der Eisenbahnschienen führen an den Rad-Schiene-Kontaktflächen zu Ermüdungserscheinungen des Materials. Infolgedessen entstehen unter anderem an bogenäußeren Schienenfahrkanten Rollkontaktermüdungsrisse, auch genannt Head Checks. Zur frühzeitigen zerstörungsfreien Prüfung der Ermüdungsrisse wird das Wirbelstromverfahren eingesetzt. Neben der Detektion von Rissen, reagiert die Wirbelstromprüfung außerdem sehr empfindlich auf Veränderungen von Materialeigenschaften, wodurch sich Verfestigungen auch ohne jedes Vorhandensein von Ermüdungsrissen nachweisen lassen. Längerfristige Beobachtungen haben gezeigt, dass die Wirbelstromprüfung das Potential besitzt, mögliche Orte der Entstehung von Ermüdungsrissen in einem extrem frühzeitigen Stadium nachzuweisen. KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Head Checks KW - Eisenbahnschienen KW - Kaltverfestigung PY - 2008 SN - 0013-2810 IS - 11 SP - 27 EP - 33 PB - Eurailpress Tetzlaff-Hestra CY - Hamburg AN - OPUS4-18381 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Rockland, U. T1 - Brandgefahren bei der Schüttgutlagerung - Einfluss von Inertgasen und Feuchte T2 - Tagungsband des 10. Kolloquiums zu Fragen der chemischen und physikalischen Sicherheitstechnik N2 - Seit langer Zeit ist bekannt, dass ungünstige Lagerungsbedingungen bei brennbaren Schüttgütern und Stäuben zur Selbstentzündung führen können. Die meisten Studien zu diesem Thema beziehen sich allerdings auf Umgebungsbedingungen (d. h. mit einem Sauerstoff-Volumenanteil von 21 % in der Schüttungsumgebung). In einigen technischen Anwendungen jedoch wird brennbares Schüttgut oder Staub unter einer Gasatmosphäre mit reduziertem Sauerstoff- Volumenanteil gelagert und verarbeitet (Inertisierung). Dabei ist zunächst nicht klar, bis zu welchem Ausmaß der Sauerstoff- Volumenanteil reduziert werden muss, um bei einer vorgegebenen Lagerungstemperatur Selbstentzündung auszuschließen. Neben dem Sauerstoffvolumenanteil können auch der Feuchtegehalt der Schüttung sowie die relative Luftfeuchtigkeit in der Schüttungsumgebung den Vorgang der Selbstentzündung beeinflussen. Die hier vorgestellten experimentellen Untersuchungen beschreiben zum einen den Einfluss des Sauerstoff-Volumenanteils auf die Selbstentzündungstemperatur (SET) von Schüttgütern und Stäuben. Es wurde beobachtet, dass die SET mit abnehmendem Sauerstoff-Volumenanteil in der Schüttungsumgebung anstieg. Jedoch traten auch bei sehr kleinem Sauerstoff-Volumenanteil noch signifikante Temperaturerhöhungen in den untersuchten Proben auf. Zum zweiten wurde der Einfluss der Feuchte auf die SET untersucht. Dabei konnte gezeigt werden, dass unterkritisch gelagerte Schüttungen durch Kondensation von Wasserdampf oder Zugabe von Wasser auf die Oberfläche der Schüttung in einen überkritischen Zustand gebracht werden konnten. Neben den experimentellen Untersuchungen wurde ein numerisches Modell entwickelt, mit dessen Hilfe sich der Selbsterwärmungsprozess bis hin zur Zündung von Schüttgütern berechnen lässt. Anwendungen findet dieses Modell für die Lagerung von Schüttgütern, Stäuben, Feststoffen sowie Abfällen. T2 - 10. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2004-06-17 PY - 2004 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-48437 SP - 19 EP - 23 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-4843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Eichelbaum, M. A1 - Rademann, K. A1 - Müller, Ralf A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Görner, Wolf T1 - Vom Atom zum Nanodraht: Kontrolliertes Wachstum von Edelmetall-Nanokristalliten in Kalk-Natron-Silikatglas T2 - Programm und Referate / 79. Glastechnische Tagung T2 - 79. Glastechnische Tagung CY - Würzburg, Deutschland DA - 2005-05-23 KW - Glas KW - Metallnanocluster KW - Optische Eigenschaften PY - 2005 SN - 3-921089-43-3 SP - 15 Seiten PB - Deutsche Glastechnische Gesellschaft CY - Offenbach AN - OPUS4-7558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nofz, Marianne A1 - Sojref, Regine A1 - Dreßler, Martin A1 - Dörfel, Ilona A1 - Reinsch, Stefan A1 - Saliwan Neumann, Romeo T1 - Korundhaltige Aluminiumoxidschichten T2 - Tagungsband des 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde T2 - 15. Symposium: Verbundwerkstoffe und Werkstoffverbunde CY - Kassel, Germany DA - 2005-04-06 PY - 2005 UR - http://www.dgm.de/download/tg/706/706_85.pdf SP - 5 Seiten PB - DGM CY - Kassel AN - OPUS4-7522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Chung, Jae Un T1 - Epoxy interphases from the mechanical point of view. T2 - Mitarbeiterseminar der AG von Frau Prof. Dr. F. Faupel, Lehrstuhl für Materialverbunde T2 - Mitarbeiterseminar der AG von Frau Prof. Dr. F. Faupel, Lehrstuhl für Materialverbunde CY - Kiel, Germany DA - 2005-05-27 PY - 2005 AN - OPUS4-7523 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, Günther A1 - Gersonde, Martin T1 - Die Fluorid-Verteilung aus Nachschutz-Modelbandagen in Holzmasten T1 - Distribution of Fluoride from Prototype Bandages for After-Treatment in Wooden Poles JF - Holz als Roh- und Werkstoff N2 - Aufgabe der Untersuchung — Versuchsausführung — Ergebnisse von Eindringtiefen-Messungen: Radiale und axiale Tiefenverteilung des Fluorids; Von Fluorid durchsetzte Holzmassen; Über die Streuung der Eindringtiefe des Nachschutz-Fluorids — Ergebnisse quantitativer Fluor-Analysen: Mengenmäßige Fluorid-Verteilung nach ljähriger Versuchsdauer; Mengenmäßige Fluorid-Verteilung nach gjähriger Versuchsdauer; Erklärung von Besonderheiten der mengenmäßigen Fluorid-Verteilung; Veränderungen zwischen 1- und gjähriger Versuchsdauer und ihre Ursachen; Reichweite einer sicheren Wirksamkeit des Nachschutz-Fluorids nach 5 Jahren; Gesamtmengen an Nachschutz-Fluorid in den Masten — Zusammenfassung — Schrifttum. PY - 1963 SN - 0018-3768 VL - 21 IS - 12 SP - 482 EP - 492 PB - Springer CY - Berlin AN - OPUS4-10275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Becker, Günther T1 - Die Verteilung von Nachschutz-Salzen aus Bandagen-Typen des Handels in Holzmasten JF - Elektrizitätswirtschaft PY - 1963 SN - 0013-5496 VL - 62 IS - 23 SP - 886 EP - 894 PB - VWEW-Energieverl. CY - Frankfurt, M. AN - OPUS4-10276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reinsch, Martin A1 - Töpfer, Antje A1 - Lehmann, Andreas A1 - Nehls, Irene T1 - Determination of ochratoxin A in wine by liquid chromatography tandem mass spectrometry after combined anion-exchange/reversed-phase clean-up JF - Analytical and bioanalytical chemistry N2 - Ochratoxin A (OTA) is a mycotoxin produced by Aspergillus ochraceus and Penicillium verrucosum. It has been found and analysed in several foods and feeds. Owing to its toxicity and occurrence in food and feed, the European Community has issued directives and some countries have their own regulations for OTA contents in food, feed and beverages. This work describes a method for the determination of OTA in mulled and red wine. It is based on combined anion exchange/reversed-phase clean-up and was analysed by liquid chromatography coupled with tandem mass spectrometry (multiple reaction monitoring). The method was validated with natural contaminated and spiked wine samples with OTA contents from 1.34 to 3.48 g kg–1. Owing to its accuracy, good reproducibility and repeatability, this easy method is a good alternative to liquid chromatography–fluorescence detection methods. KW - Ochratoxin A KW - Wine KW - Tandem mass spectrometry KW - Solid-phase extraction KW - Anion exchange KW - Liquid chromatography PY - 2005 DO - https://doi.org/10.1007/s00216-005-3097-4 SN - 1618-2642 SN - 1618-2650 VL - 381 IS - 8 SP - 1592 EP - 1595 PB - Springer CY - Berlin AN - OPUS4-10306 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Neumann, F. T1 - Untersuchung des Entzündungs- und Brandverhaltens von Steinkohlen unter dem Gesichtspunkt des Ex-Schutzes JF - VGB PowerTech KW - Explosionsschutz KW - Steinkohle KW - Mahlanlagen KW - Selbstentzündung PY - 2007 SN - 1435-3199 VL - 87 IS - 7 SP - 67 EP - 72 PB - VGB PowerTech e.V. CY - Essen AN - OPUS4-15711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Frunza, L. A1 - Schönhals, Andreas A1 - Frunza, S. A1 - Parvulescu, V.I. A1 - Cojocaru, B. A1 - Carriazo, D. A1 - Martín, C. A1 - Rives, V. T1 - Rotational Fluctuations of Water Confined to Layered Oxide Materials - Nonmonotonous Temperature Dependence of Relaxation Times JF - The journal of physical chemistry / A N2 - The rotational molecular dynamics of water confined to layered oxide materials with brucite structure was studied by dielectric spectroscopy in the frequency range from 10-2 to 107 Hz and in a broad temperature interval. The layered double hydroxide samples show one relaxation process, which was assigned to fluctuations of water molecules forming a layer, strongly adsorbed to the oxide surface. The temperature dependence of the relaxation rates has an unusual saddlelike shape characterized by a maximum. The model of Ryabov et al. (J. Phys. Chem. B 2001, 105, 1845) recently applied to describe the dynamics of water molecules in porous glasses is employed also for the layered materials. This model assumes two competing effects: rotational fluctuations of water molecules that take place simultaneously with defect formation, allowing the creation of free volume necessary for reorientation. The activation energy of rotational fluctuations, the energy of defect formation, a pre-exponential factor, and the defect concentration are obtained as main parameters from a fit of this model to the data. The values of these parameters were compared with those found for water confined to nanoporous molecular sieves, porous glasses, or bulk ice. Several correlations were discussed in detail, such as the lower the value of the energy of defect formation, the higher the number of defects. The pre-exponential factor increases with increasing activation energy, as an expression of the compensation law, and indicates the cooperative nature of the motional process. The involvement of the surface OH groups and of the oxygen atoms of the interlayer anions in the formation of hydrogen bonds was further discussed. For the birnessite sample, the relaxation processes are probably overlaid by a dominating conductivity contribution, which is analyzed in its frequency and temperature dependence. It is found that the conductivity of birnessite obeys the characteristics of semiconducting disordered materials. Especially the Barton/Nakajima/Namikawa relationship is fulfilled. Analyzing the temperature dependence of the direct current (dc) conductivity σ0 in detail gives some hint that σ0(T) has also an unusual saddlelike form. PY - 2007 DO - https://doi.org/10.1021/jp0717140 SN - 1089-5639 SN - 1520-5215 VL - 111 IS - 24 SP - 5166 EP - 5175 PB - Soc. CY - Washington, DC AN - OPUS4-15718 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hölck, Ole A1 - Heuchel, M. A1 - Böhning, Martin A1 - Hofmann, D. T1 - Simulation of Experimentally Observed Dilation Phenomena During Integral Gas Sorption in Glassy Polymers JF - Journal of polymer science B, polymer physics N2 - A molecular modeling investigation of dilation effects induced by sorbed gas molecules in two glassy polymers is presented. As experimental reference, integral sorption of CO2 and CH4 was measured for polysulfone (PSU) and a polyimide (6FDA-TrMPD, PI4) at 308 K and a pressure of 10 bar. Simultaneously, the gas induced swelling effect was measured with a dilatometer based on a capacitive distance sensor recorded. The experimental evidence of the (on the observed time scale and concentration levels) elastic nature of the gas induced dilation is supported by the dilation and contraction behavior observed in molecular dynamics (MD) simulations of respective detailed atomistic packing models. These models were constructed in accordance with gas concentration levels obtained from the experimental sorption results. Quantitative deviations between simulated and measured dilations are discussed as a consequence of an anelastic response of the polymer matrix which is too fast to be resolved in the experiments whose kinetics is dominated by diffusional processes. In the simulation, the initial insertion of penetrant molecules into equilibrated packing models circumvents the slow diffusional process of the experiment and allows a reasonable representation of the dilation process as well as a closer investigation. Our simulation approach reveals a different behavior for PSU and PI4 on the corresponding time scale. Most likely, the different chain mobility of the two polymers is responsible for the respective response to the inserted amount of gas molecules which is discussed in terms of the different chain mobilities of the two polymers. KW - Diffusion KW - Dilation KW - Gas sorption KW - Molecular modeling KW - Poly(ether sulfones) KW - Polyimides KW - Swelling PY - 2008 DO - https://doi.org/10.1002/polb.21342 SN - 0887-6266 SN - 1099-0488 VL - 46 IS - 1 SP - 59 EP - 71 PB - Wiley CY - Hoboken, NJ AN - OPUS4-16206 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich ED - Thomas Stolz, ED - Heino Bothe, T1 - Vorhersage von Brandszenarien bei der Lagerung von Schüttgütern T2 - 11. BAM /PTB-Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik, 26.- 27.6.2007, Braunschweig (PTB-Bericht: Chemische Physik und Explosionsschutz - PTB-Ex-1) KW - Selbstentzündung KW - Schüttgüter KW - Kohle KW - Biomasse KW - Numerische Simulation PY - 2007 SN - 978-3-86509-700-2 SP - 90 EP - 101 PB - Wirtschaftsverl. NW, Verl. für Neue Wiss. CY - Braunschweig AN - OPUS4-16277 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Untersuchung des Verhaltens von Steinkohlen unter dem Gesichtspunkt des Explosionsschutzes T2 - VGB-Konferenz "Kraftwerke im Wettbewerb 2007" T2 - VGB-Konferenz "Kraftwerke im Wettbewerb 2007" CY - Hamburg, Germany DA - 2007-04-25 PY - 2007 AN - OPUS4-16227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus T1 - Maßnahmen des Explosionsschutzes in Steinkohle-Mahlanlagen T2 - Erfahrungsaustausch Kraftwerksingenieure T2 - Erfahrungsaustausch Kraftwerksingenieure CY - Herne, Germany DA - 2007-03-21 PY - 2007 AN - OPUS4-16228 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Selbstentzündung brennbarer Schüttgüter: Gefahren-Beurteilung-Maßnahmen T2 - Führungskräfteseminar der Berufsfeuerwehren Brandenburg T2 - Führungskräfteseminar der Berufsfeuerwehren Brandenburg CY - Eisenhüttenstadt, Germany DA - 2007-05-04 PY - 2007 AN - OPUS4-16229 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Vorhersage von Brandszenarien bei der Lagerung von Schüttgütern T2 - BAM-PTB-Kolloquien T2 - BAM-PTB-Kolloquien CY - Braunschweig, Germany DA - 2007-06-26 PY - 2007 AN - OPUS4-16232 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Untersuchungen zum Explosionsschutz in Steinkohle-Mahlanlagen T2 - Sitzung des Arbeitskreises "Explosionsschutz" des Fachausschusses "Chemie", BG Chemie T2 - Sitzung des Arbeitskreises "Explosionsschutz" des Fachausschusses "Chemie", BG Chemie CY - Heidelberg, Germany DA - 2007-11-08 PY - 2007 AN - OPUS4-16233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strub, Erik A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Reznikova, E. T1 - Measurements with compound refractive lenses at the "BAMline" JF - Nuclear instruments and methods in physics research B N2 - A set of compound refractive lenses (CRLs), mounted on a silicon wafer, was obtained from the Institut für Mikrostrukturtechnik Karlsruhe. The CRLs were characterized at the BAMline at the synchrotron BESSYII in Berlin. It could be demonstrated that beam diameters below 1 µm can be obtained. The beam size accepted by the lenses is (140 × 140) µm2, thus the intensity gain in the micrometer spot, including absorption, is about 15,000. It is possible to switch between different beam energies within a few minutes. First results of scans and the application of the lenses for MicroXANES (X-ray absorption near-edge structure) measurements are presented in this paper. Also, the possibility of MicroEXAFS (extended X-ray absorption fine structure) measurements is discussed. KW - X-ray optics KW - XANES KW - EXAFS KW - XAS KW - XRF KW - Speciation PY - 2008 DO - https://doi.org/10.1016/j.nimb.2008.02.057 SN - 0168-583X SN - 1872-9584 VL - 266 IS - 10 SP - 2165 EP - 2168 PB - Elsevier CY - Amsterdam AN - OPUS4-17554 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strub, Erik A1 - Plarre, Rüdiger A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Schoknecht, Ute A1 - Urban, Klaus A1 - Jüngel, P. T1 - Determination of Cr(VI) in wood specimen: A XANES study at the Cr K edge JF - Nuclear instruments and methods in physics research B N2 - The content of chromium in different oxidation states in chromium-treated wood was studied with XANES (X-ray absorption near-edge structure) measurements at the Cr K absorption edge. It could be shown that wood samples treated with Cr(VI) (pine and beech) did still contain a measurable content of Cr(VI) after four weeks conditioning. If such wood samples were heat exposed for 2 h with 135 °C prior conditioning, Cr(VI) was no longer detected by XANES, indicating a complete reduction to chromium (III). KW - X-ray spectroscopy KW - XANES KW - XAS KW - XRF KW - Specifikation KW - Reduction PY - 2008 DO - https://doi.org/10.1016/j.nimb.2008.03.011 SN - 0168-583X SN - 1872-9584 VL - 266 IS - 10 SP - 2405 EP - 2407 PB - Elsevier CY - Amsterdam AN - OPUS4-17555 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Influence of environmental parameters on the self-ignition behavior of coal T2 - Spontaneous coal seam fires - mitigating a global disaster T2 - International Conference "Spontaneous Coal Seam Fires: Mitigating a Global Disaster" CY - Beijing, P.R. China DA - 2005-11-29 KW - Self-ignition KW - Coal KW - Influence parameters PY - 2008 SN - 978-7-302-17140-9 N1 - Serientitel: ERSEC ecological book series – Series title: ERSEC ecological book series IS - 4 SP - 210 EP - 232 PB - Tsinghua University Press CY - Beijing, China AN - OPUS4-17610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Ulrich A1 - Schmidt, Martin A1 - Lohrer, Christian T1 - Computation of real-scale coal fire scenarios based on linking lab-scale experiments with a numerical heat and mass transfer model T2 - Spontaneous coal seam fires - mitigating a global disaster T2 - International Conference "Spontaneous Coal Seam Fires: Mitigating a Global Disaster" CY - Beijing, P.R. China DA - 2005-11-29 KW - Self-ignition KW - Numerical simulations PY - 2008 SN - 978-7-302-17140-9 N1 - Serientitel: ERSEC ecological book series – Series title: ERSEC ecological book series IS - 4 SP - 485 EP - 512 PB - Tsinghua University Press CY - Beijing, China AN - OPUS4-17611 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Wöstmann, Jens A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Streicher, Doreen A1 - Kohl, C. ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Influence of concret properties on the calibration of radar, ultrasonics and active thermography T2 - 1st International RILEM Conference - on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008), Proceedings T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Concrete KW - Radar KW - Ultrasonics KW - Active thermography KW - Velocity calibration PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 15 EP - 24 PB - RILEM Publications AN - OPUS4-18033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Lohrer, Christian T1 - Brennbare Schüttgüter und Stäube - Brand- und Explosionsgefahren richtig bewerten T2 - DECHEMA Weiterbildungskurs "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" T2 - DECHEMA Weiterbildungskurs "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" CY - Frankfurt am Main, Germany DA - 2008-10-22 PY - 2008 AN - OPUS4-18006 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mayer, K. A1 - Gräfe, Boris A1 - Milmann, Boris T1 - Features for ultrasonic imaging of concrete elements: Phase evaluation and air coupled ultrasound T2 - 12th International Conference Structural Faults and Repair 2008 T2 - 12th International Conference Structural Faults and Repair 2008 CY - Edinburgh, Scotland DA - 2008-06-10 PY - 2008 AN - OPUS4-18065 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ritter, Martin A1 - Kranzmann, Axel A1 - Koenders, L. A1 - Dziomba, T. A1 - Friedrich, Andreas T1 - Accuracy estimation of SPM 3D-Calibration by Error separation T2 - Nanoscale 2008 T2 - Nanoscale 2008 CY - Turin, Italy DA - 2008-09-22 PY - 2008 AN - OPUS4-18446 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ritter, Martin A1 - Dziomba, T. A1 - Xu, M. A1 - Dai, G. A1 - Koenders, L. T1 - Systematic analytics of non-linear deviations by established standards and a new generation of 3D standards T2 - Nanoscale 2008 T2 - Nanoscale 2008 CY - Turin, Italy DA - 2008-09-22 PY - 2008 AN - OPUS4-18447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - The use of Synchrotron Radiation induced X-Rax Fluorescence for the Chracterization of Ancient Gold objects T2 - AURUM: workshop on authentication and analysis of gold work T2 - AURUM: workshop on authentication and analysis of gold work CY - Paris, France DA - 2009-05-11 PY - 2009 AN - OPUS4-18532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Görner, Wolf A1 - Eichelbaum, Maik A1 - Matschat, Ralf A1 - Rademann, K. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Non-destructive investigation of composition, chemical properties and structure of materials by synchrotron radiation JF - Insight PY - 2006 SN - 0007-1137 VL - 48 IS - 9 SP - 540 EP - 544 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-14186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Görner, Wolf A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Roth, M. ED - Denker, A. ED - Adriaens, A. ED - Dowsett, M. ED - Giumlia-Mair, A. T1 - Synchrotron radiation and protons on the traces of famous artists - Non-destructive analyses of silverpoint drawings by Albrecht Dürer T2 - COST Action G8 KW - X-ray spectrometry KW - XRF KW - Röntgenfluoreszenzanalyse KW - RFA KW - Silverpoint drawing KW - Silberstiftzeichnung PY - 2006 SN - 3-8167-7178-5 SP - 91 EP - 101 PB - Fraunhofer-IRB-Verl. CY - Stuttgart AN - OPUS4-14190 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Milmann, Boris A1 - Schickert, M. A1 - Mayer, K. T1 - Investigation of tendon ducts by means of ultrasonic echo methods: a comparative study T2 - 9th European Conference on NDT T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 PY - 2006 AN - OPUS4-14122 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen A1 - Mayer, K. T1 - Ultrasonic reflection properties at interfaces between concrete, steel and air: imaging and modelling T2 - 2006 NDE Conference on Civil Engineering T2 - 2006 NDE Conference on Civil Engineering CY - St. Louis, MO, USA DA - 2006-08-14 PY - 2006 AN - OPUS4-14155 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hasenstab, Andreas A1 - Krause, Martin T1 - Ultraschall-Echo-Technik zur Ortung von Minderdicken und Schäden in Holzbauteilen T2 - Fachtagung Bauwerksdiagnose 2006 - Praktische Anwendungen Zerstörungsfreier Prüfungen T2 - DGZfP-Fachtagung Bauwerksdiagnose "Praktische Anwendungen Zerstörungsfreier Prüfungen" CY - Berlin, Deutschland DA - 2006-02-22 KW - Zerstörungsfreie Prüfung KW - Holz KW - Ultraschallecho KW - ZfP an Holzbauteilen KW - Fehlstellen KW - Minderdicken KW - Ultraschall-Echo KW - Fäulnis KW - Bauwesen PY - 2006 SN - 3-931381-71-4 SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-14233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - von Bohlen, A. A1 - Hergenröder, R. A1 - Sternemann, C. A1 - Paulus, M. A1 - Radtke, Martin A1 - Riesemeier, Heinrich T1 - Wavelenght Dispersive Synchrotron Microprobe Used for Material Analysis JF - Instrumentation science & technology N2 - Synchrotron radiation (SR) has been used in recent years as an excellent excitation source for X-ray fluorescence spectrometry. SR offers, in contrast to conventional X-ray sources, highly brilliant polychromatic, polarized radiation with which micro-domain X-ray fluorescence spectrometry becomes possible. A feasibility study of utility, conducted at BESSY (Berlin) and at DELTA (Dortmund), both synchrotron facilities of the third generation, to evaluate the use of wavelength dispersive X-ray fluorescence spectrometry in combination with synchrotron radiation is presented. First results for material analysis, obtained by combining the synchrotron radiation and a commercially available spectrometer commonly attached to a scanning electron microscope, are presented. The spectrometer, of the linear type, uses curved focusing Bragg-crystals of the Johann type which leads to a high spectral resolution up to 3 eV. Examples of micro-domain analyses are presented and compared with those obtained by synchrotron radiation induced energy dispersive X-ray fluorescence. KW - Synchrotron radiation KW - WDXRF KW - EDXRF KW - Micro analysis KW - Material analysis PY - 2005 DO - https://doi.org/10.1081/CI-200048048 SN - 1073-9149 SN - 1525-6030 VL - 33 IS - 2 SP - 137 EP - 150 PB - Dekker CY - New York, NY AN - OPUS4-14235 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Guerra, M. F. A1 - Calligaro, T. A1 - Radtke, Martin A1 - Reiche, I. A1 - Riesemeier, Heinrich T1 - Fingerprinting ancient gold by measuring Pt with spatially resolved high energy Sy-XRF JF - Nuclear instruments and methods in physics research B N2 - Trace elements of ancient gold such as Pt, give fundamental information on the circulation of the metal in the past. In the case of objects from the cultural heritage, the determination of trace elements requires non-destructive point analysis in general. These conditions and the need of good detection limits restrain the number of applicable analytical techniques. After the development of a PIXE set-up with a selective Cu or Zn filter of 75 µm and of a PIXE-XRF set-up using a primary target of As, we tested the possibilities of spatially resolved Sy-XRF to determine Pt in gold alloys. With a Zn filter, PIXE showed a detection limit of 1000 ppm in gold while PIXE-XRF lowers this detection limit down to 80 ppm. This last value being constrained by the resonant Raman effect produced on gold. In order to improve the detection limit of Pt keeping the non-destructiveness and access to point analysis, we developed an analytical protocol for XRF with synchrotron radiation at BESSY II, using the BAMline set-up. The L-lines of Pt were excited by a beam of energy above and below 11.564 keV and measured using a Si(Li) detector with a 50 µm Cu filter. A µ-beam of 100–250 µm2 was used according to the size of the sample. The determination of the Pt content in the samples was carried out by Monte-Carlo simulation and subtraction of Au and Pt spectra obtained on pure standards. The limit of detection for Pt of 20 ppm was determined by using certified standards. The detection limits of a small set of other characteristic elements of gold were also measured using an incident energy of 33 keV. KW - PIXE-XRF KW - Sy-XRF KW - Pt KW - Ancient gold KW - Fingerprinting PY - 2005 DO - https://doi.org/10.1016/j.nimb.2005.06.150 SN - 0168-583X SN - 1872-9584 VL - 240 IS - 1-2 SP - 505 EP - 511 PB - Elsevier CY - Amsterdam AN - OPUS4-14236 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen A1 - Mayer, K. T1 - Ultrasonic Reflection Properties at Interfaces Between Concrete Steel and Air: Imaging and Modelling T2 - NDE Conference on Civil Engineering T2 - NDE Conference on Civil Engineering CY - St. Louis, Missouri, USA DA - 2006-08-14 KW - Ultrasonic echo KW - Concrete PY - 2006 SN - 1-57117-148-7 SP - 472 EP - 479 PB - ASTM CY - St. Louis AN - OPUS4-14239 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Milmann, Boris A1 - Schickert, M. A1 - Mayer, K. T1 - Investigation of Tendon Ducts by Means of Ultrasonic Echo Methods - A Comparative Study T2 - 9th European Conference on NDT T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - NDT-CE KW - Concrete KW - Tendon ducts KW - Ultrasonic echo KW - Ultrasonic imaging KW - Grouting faults PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 12(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14224 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mayer, K. A1 - Langenberg, K.-J. A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Milmann, Boris A1 - Kohl, Christoph T1 - Characterization of ultrasonic and radar reflector types in concrete by phase evaluation of the signal and the reconstructed image T2 - 9th European Conference on NDT T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - NDT-CE KW - Ultrasonic echo KW - Radar KW - Phase evaluation KW - Modeling of wave propagation KW - Reconstruction calculation PY - 2006 SN - 3-931381-86-2 SP - 1 EP - 8(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14225 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolff, Timo A1 - Hahn, Oliver A1 - Merchel, Silke A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Denker, A. T1 - Four non-destructive X-Ray methods analyzing corroded coins: A self-critical comparison T2 - Workshop Synchrotron Radiation in Art and Archaeology 2006 T2 - Workshop Synchrotron Radiation in Art and Archaeology 2006 CY - Berlin, Germany DA - 2006-09-27 PY - 2006 AN - OPUS4-14229 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Brzezinka, Klaus-Werner T1 - Analysis of hydrogen in glass - different methodological aspects T2 - Forum "Water and Sulfur in Glass" des TC14 der Int. Comm. on Glass T2 - Forum "Water and Sulfur in Glass" des TC14 der Int. Comm. on Glass CY - Dresden, Germany DA - 2006-06-12 PY - 2006 AN - OPUS4-14242 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina T1 - Spektral induzierte Polarisation an stehenden Bäumen T2 - 1. Symposium Impedanzspektroskopie, Grundlagen und Anwendungen T2 - 1. Symposium Impedanzspektroskopie, Grundlagen und Anwendungen CY - Essen, Germany DA - 2006-05-16 PY - 2006 AN - OPUS4-14246 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Mayer, K. T1 - Objektabbildung mit scannenden Ultraschallecho-Verfahren T2 - Verkehrsbauten - Flächentragwerke (Beton-Kalender 2007) KW - ZfPBau KW - Ultraschallecho KW - Betonbauteile KW - Spannkanäle KW - Phased Array KW - Rekonstruktionsrechnung KW - Modellierung elastischer Wellen PY - 2006 SN - 978-3-433-01833-0 SN - 0342-7617 VL - 1 IS - Kap. V / Abschnitt 8 SP - 543 EP - 554 PB - Ernst CY - Berlin AN - OPUS4-14272 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Beutel, R. A1 - Reinhardt, H.-W. A1 - Grosse, C. U. A1 - Glaubitt, A. A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Algernon, Daniel A1 - Wiggenhauser, Herbert A1 - Schickert, M. T1 - Performance Demonstration of Non-Destructive Testing Methods T2 - 9th European Conference on NDT T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - NDT-CE KW - Concrete KW - Ultrasonic echo KW - Impact-echo KW - Radar KW - Concrete cover of tendon ducts KW - Thickness measurement KW - Concrete slabs PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 9(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14382 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Tina T1 - Spektrale Induzierte Polarisation (SIP) an stehenden Bäumen JF - Technische Mitteilungen KW - Impedanzspektroskopie KW - Spektrale Induzierte Polarisation KW - SIP KW - Bäume KW - Tomographie KW - Pilzbefall PY - 2006 SN - 0040-1439 VL - 99 IS - 1/2 SP - 274 EP - 279 PB - Haus d. Technik CY - Essen AN - OPUS4-14377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Beutel, R. A1 - Reinhardt, H.-W. A1 - Große, C. A1 - Krause, Martin A1 - Algernon, Daniel A1 - Streicher, Doreen A1 - Maierhofer, Christiane A1 - Glaubitt, A. T1 - Quantitativer Verfahrensvergleich T2 - Verkehrsbauten - Flächentragwerke (Beton-Kalender 2007) KW - ZfPBau KW - Ultraschallecho KW - Radar KW - Impact-Echo KW - Dickenmessung KW - Betondeckung KW - Hüllrohrortung KW - Betonbauteile PY - 2006 SN - 978-3-433-01833-0 SN - 0342-7617 VL - 1 IS - Kap. V / Abschnitt 11 SP - 567 EP - 573 PB - Ernst CY - Berlin AN - OPUS4-14379 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Osterloh, Kurt T1 - Testing Of Wooden Construction Elements with Ultrasonic Echo Technique and X-Ray T2 - 9th European Conference on NDT T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 KW - NDT of Wood PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 8(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14422 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hölck, Ole A1 - Siegert, M.R. A1 - Heuchel, M. A1 - Böhning, Martin T1 - CO2 Sorption Induced Dilation in Polysulfone: Comparative Analysis of Experimental and Molecular Modeling Results JF - Macromolecules N2 - Experimental sorption and dilation data of the polysulfone/CO2 system at 308 K and pressures up to 50 bar were measured utilizing a gravimetric sorption balance and a dilatometer based on a capacitive distance sensor. The data of this glassy polymer/gas system were subjected to a thorough kinetic analysis on the basis of a viscoelastic model, which allows the separation of the diffusive/elastic fraction of the sorption/dilation process from the slower relaxational part. The results were interpreted in terms of the common dual mode sorption model and the site distribution model of Kirchheim. Detailed atomistic packing models of the same polymer/gas system were created for two reference states with regard to concentration and swelling. The CO2 sorption isotherms of the packing models corresponding to these two swelling states, calculated using GCMC simulations, could be combined in order to interpolate the gas uptake over the intermediate pressure range with good agreement to the experimental data. The elastic part of the gas induced dilation is successfully described by MD simulations and derived partial molar volumes are in satisfying agreement with experimental findings. Finally, the free volume of the packing models is probed and the obtained size distribution of the free volume elements is compared to the results of the analysis of experimental data according to the site distribution model. KW - Sorption KW - Dilation KW - Dual mode sorption model KW - Site distribution model KW - Molecular modelling KW - Polysulfone PY - 2006 SN - 0024-9297 SN - 1520-5835 VL - 39 IS - 26 SP - 9590 EP - 9604 PB - American Chemical Society CY - Washington, DC AN - OPUS4-14405 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Eine verbesserte Methode zur Bestimmung der Selbstentzündungstemperaturen brennbarer Stäube T2 - Tagungsunterlagen der 8. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 8. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Deutschland DA - 2006-11-09 KW - Selbstentzündung KW - Brennbare Schüttgüter KW - Sicherheitstechnische Kenngrößen PY - 2006 SN - 3-936415-48-X SP - 1 EP - 13 PB - VDI, Hallescher Bezirksverein CY - Halle AN - OPUS4-14478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin T1 - Zerstörungsfreie Prüfung im Bauwesen - Aus der Tätigkeit der Bundesanstalt für Materialforschung und -prüfung T2 - Forum Praxis Altbau 07 im Rahmen der Bau 2007, Thema: Forschung und Wissenschaft T2 - Forum Praxis Altbau 07 im Rahmen der Bau 2007, Thema: Forschung und Wissenschaft CY - Munich, Germany DA - 2007-01-15 PY - 2007 AN - OPUS4-14553 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Algernon, Daniel A1 - Gardei, André A1 - Gräfe, Boris A1 - Kohl, Christoph A1 - Lausch, Regine A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen A1 - Zacher, Gerhard T1 - Grundlagen kombinierter zerstörungsfreier Prüfverfahren zur Untersuchung von Betonbauteilen T2 - Bericht vom Forschergruppe 384 Abschlusskolloquium T2 - Forschergruppe 384 Abschlusskolloquium CY - Bergisch Gladbach, Deutschland DA - 2007-05-03 PY - 2007 SP - 23 EP - 44 PB - BAM CY - Berlin AN - OPUS4-14805 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wolf, Martin A1 - Kannengießer, Thomas T1 - Modern Test Methods for Assessing the Hot Cracking Resistance During Welding of High-Alloyed Steels and Nickel Base Alloys JF - Soldagem & Inspecao KW - Hot cracks KW - MVT-Test KW - Alloy 602 CA (Material No.: 2.4633, NiCr25FeAlY) KW - Specimen loading speed PY - 2007 SN - 0104-9224 SN - 1980-6973 VL - 12 IS - 1 SP - 73 EP - 77 PB - Associação Brasileira de Soldagem, ABS CY - Rio de Janeiro AN - OPUS4-14797 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hao, Ning A1 - Böhning, Martin A1 - Goering, Harald A1 - Schönhals, Andreas T1 - Nanocomposites of Polyhedral Oligomeric Phenethylsilsesquioxanes and Poly(bisphenol A carbonate) as Investigated by Dielectric Spectroscopy JF - Macromolecules N2 - Nanocomposites were prepared by solution blending of polyhedral oligomeric silsesquioxane with phenethyl substituents (PhenethylPOSS) into poly(bisphenol A carbonate) (PBAC). The nanocomposites were investigated by dielectric spectroscopy, differential scanning calorimetry (DSC) and density measurements. PhenethylPOSS shows one relaxation process, the α-relaxation, confirmed by DSC investigations. PBAC shows a β-relaxation at lower and an α-relaxation at higher temperatures. With increasing PhenethylPOSS content the α-relaxation of the composites shifts to lower temperatures. Thus, incorporation of PhenethylPOSS leads to a plasticization of PBAC due to a decrease of the packing density which is rationalized by density measurements. For higher concentrations of PhenethylPOSS (>10 wt %) the α-relaxation of the polycarbonate matrix splits into two peaks. Moreover, close to the α-relaxation of PhenethylPOSS a third process is observed. These results indicate a phase separation into a PBAC matrix with a few percents of molecularly solved POSS and POSS-rich domains. These POSS-rich domains are surrounded by an interfacial layer of PBAC having a higher concentration of POSS than the matrix. A phase diagram is deduced providing a miscibility criterion. For the phase separated nanocomposites an interfacial polarization phenomena is observed. Using a simplified model the time constant of this process is correlated with the size of the PhenethylPOSS-rich domains and theire increasing size with the increase of the concentration of POSS. KW - Polyhedral oligomeric silsesquioxane (POSS) KW - Polymer-based nanocomposites KW - Broadband dielectric spectroscopy KW - Interfacial polarisation PY - 2007 SN - 0024-9297 SN - 1520-5835 VL - 40 IS - 8 SP - 2955 EP - 2964 PB - American Chemical Society CY - Washington, DC AN - OPUS4-14768 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Krause, Ulrich A1 - Neumann, F. T1 - Untersuchung des Verhaltens von Steinkohlen unter dem Gesichtspunkt des Ex-Schutzes T2 - Tagungsband - VGB-Konferenz "Kraftwerke im Wettbewerb 2007, Neue Kraftwerke N2 - Die Kenntnis des Brenn- und Explosionsverhaltens von Stäuben ermöglicht die Festlegung geeig-neter Explosionsschutzmaßnahmen. Am Beispiel von Steinkohle- Mahlanlagen werden Untersu-chungen zur Bestimmung sicherheitstechnischer Kenngrößen (STK) von Stäuben vorgestellt. Hier-bei erfolgt zunächst die auf den Anwendungsfall abgestimmte Auswahl geeigneter Untersuchungs-verfahren und deren Anpassung an vorliegende Randbedingungen. Aufbauend auf die gewonnenen Erkenntnisse werden Schlussfolgerungen für den sicheren Betrieb von Steinkohle- Mahlanlagen getroffen. T2 - VGB-Konferenz "Kraftwerke im Wettbewerb 2007, Neue Kraftwerke - mit Erfahrung und Innovation die Zukunft gestalten" CY - Hamburg, Deutschland DA - 2007-04-25 KW - Explosionsschutz KW - Steinkohle KW - Mahlanlagen KW - Selbstentzündung PY - 2007 IS - CD-ROM SP - 15 Seiten PB - VGB PowerTech e.V. CY - Hamburg AN - OPUS4-14785 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Heckel, Thomas A1 - Hanspach, G. T1 - Advantage of a combined ultrasonic and eddy current examination for railway inspection trains JF - Insight N2 - Some years ago, two railway inspection trains (RIT) already equipped with ultrasound, had additional advanced eddy current techniques installed. Recently, a new RIT was equipped with a system that was designed, from the beginning, to employ a combination of these two techniques for non-destructive rail inspection. The eddy current technique has been developed to enable identification and evaluation of rolling contact fatigue (RCF) defects. The ultrasound technique is aimed at measurements in the rail bulk volume, which are not feasible using the eddy current technique. Experience gained from application has shown that clear improvement on rail inspection can be achieved. For example, following Deutsche Bahn DB (German Rail) AG guideline, defects which are classified as group 2 using ultrasound testing can be further labelled as 'distinguished positions' if, for example, head checking can be identified in the same position using the eddy current technique. In other words, the new technique is capable of identifying two fundamentally different types of defects occurring at the same location. Such defects can then be classified as Group 1, equivalent according to the DB AG guideline. Furthermore, problem cases in the past, such as the decision whether a weld or rail joint is present for a fishing table, can be reliably determined using additional information from the eddy current technique. In this paper, examples will be provided to demonstrate application. KW - Eddy Current KW - Ultrasonic KW - Rail Inspection KW - Detection of Rail Defects PY - 2007 DO - https://doi.org/10.1784/insi.2007.49.6.341 SN - 0007-1137 VL - 49 IS - 6 SP - 341 EP - 344 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-16127 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Malz, Frank A1 - Pauli, Jutta A1 - Jäger, Christian A1 - Reinsch, Stefan A1 - Scholz, G. T1 - Aluminum speciation and thermal evolution of aluminas resulting from modified Yoldas sols JF - Journal of solid state chemistry N2 - Aluminas resulting from sols prepared via a modified Yoldas procedure were studied with differential thermal analysis (DTA), differential thermal gravimetrie (DTG), 27Al nuclear magnetic resonance (27Al MAS NMR) and X-ray diffraction (XRD) concerning their thermal properties, aluminum speciation and phase content. Hydrolysis of aluminum-sec-butoxide in aluminum nitrate solutions allowed to prepare stable sols with varying NO3-/Al molar ratios, solids contents and pH values. Resulting sols contained different aluminum species including also Al13 polycations. Sol preparation conditions also determined aluminum speciation in solid products obtained after thermal treatments of gels obtained from these sols. Al13 polycations and AlO5 species were found to play an important role for thermally induced transformation from amorphous products via eta-Al2O3 to alpha-Al2O3. Intermediately formed eta-Al2O3 promotes the phase transformation to alpha-Al2O3. KW - Alumina KW - Modified Yoldas sols KW - 27Al nuclear magnetic resonance KW - Differential thermal analysis KW - X-ray diffraction PY - 2007 DO - https://doi.org/10.1016/j.jssc.2007.06.018 SN - 0022-4596 SN - 1095-726X VL - 180 IS - 9 SP - 2409 EP - 2419 PB - Elsevier CY - San Diego, Calif. AN - OPUS4-16189 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Gemeinert, Marion T1 - Rheology, UV-vis transparency and particle size of modified Yoldas sols JF - Journal of sol gel science and technology N2 - Alumina sols were prepared using a modified Yoldas procedure, thus resulting in sols with high solids content, excellent long term stability and small particle size. PH-value ranged between 3.7 and 0.6. Sols were characterised using rheological, UV-vis transmission and particle size measurements. Depending on NO3-/Al molar ratio as well as solids content, sols vary. Analysis of reduced viscosities indicate the formation of chainlike polymeric species above a critical solids fraction. KW - Alumo-sol KW - Rheology KW - UV-vis-transparency PY - 2006 DO - https://doi.org/10.1007/s10971-006-6634-5 SN - 0928-0707 SN - 1573-4846 VL - 38 IS - 3 SP - 261 EP - 269 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-16192 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Berger, Achim A1 - Duval, A. A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Schäfer, D. A1 - Simon, R. T1 - SY-XRF study of Hans Baldung Grien silverpoint drawings and the silver stylus from the 'Karlsruhe sketchbook' JF - X-ray spectrometry N2 - We performed spatially resolved synchrotron-induced x-ray fluorescence analyses (SY-XRF) of five silverpoint drawings from the famous `Karlsruhe sketchbook´ and a silverpoint, which is assumed to be an original one used by the Renaissance artist Hans Baldung Grien (1484-1545) himself. The silverpoint, one out of a very small number of ancient styli conserved nowadays, is fixed on the so-called `Karlsruhe sketchbook´. Measurements were executed at the FLUO-TOPO beamline at the electron storage ring ANKA. It has been shown, that SY-XRF at this beamline is nondestructive and sensitive enough for the analysis of minor and major elements in the silver strokes. This study provides new insights into this graphical technique and ancient drawing instruments: results are that three drawings have been created with a common type of silverpoint containing about (10.4 ± 0.7) wt% of Cu. In all the cases, Hg at a 10% level by weight was identified in the strokes. Presence of Hg is not due to the original silver alloy, but is a result of a general alteration phenomenon of silverpoint drawings. This fact is confirmed by the analysis of the original silverpoint, which contains only small traces of Hg. The result for the copper content of the silverpoint (10.4 ± 1.7) wt% is in good agreement with that of these three drawings. It is supposable that the silverpoint found attached today served for the creation of the corresponding drawings. Moreover, the graphical technique of Baldung is found to be continual over three decades. Only one very late drawing dated to 1543 was probably realized with another silverpoint, containing about 3 wt% of Cu. This difference in the chemical composition of drawings from the late period might be used as a more precise dating indicator of Baldung drawings that are not clearly attributed to a certain period. KW - Synchrotron KW - XRF analysis KW - Drawings KW - Silver stylus PY - 2007 DO - https://doi.org/10.1002/xrs.963 SN - 0049-8246 VL - 36 IS - 3 SP - 173 EP - 177 PB - Wiley CY - Chichester AN - OPUS4-16150 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Strub, Erik A1 - Guerra, M. F. A1 - Reiche, I. T1 - Analysis of trace elements in gold alloys by SR-XRF at high energy at the BAMline T2 - Ecaart 9 (European conference on accelerators in applied research and technology) T2 - Ecaart 9 (European conference on accelerators in applied research and technology) CY - Florence, Italy DA - 2007-09-03 PY - 2007 AN - OPUS4-16399 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eichelbaum, M. A1 - Rademann, K. A1 - Weigel, W. A1 - Löchel, B. A1 - Radtke, Martin A1 - Müller, Ralf T1 - Gold-Ruby Glass in a New Light: On the Microstructuring of Optical Glasses with Synchrotron Radiation JF - Gold Bulletin KW - Nanoparticles KW - Glasses KW - Synchrotron radiation KW - X-ray lithography KW - Surface plasmon resonance KW - Luminescence PY - 2007 SN - 0017-1557 VL - 40 IS - 4 SP - 1 EP - 5 CY - London AN - OPUS4-16432 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Numerische Simulation von Selbstentzündungsvorgängen, Modell und Praxisbeispiele T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Nuremberg, Germany DA - 2008-03-11 PY - 2008 AN - OPUS4-17325 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lohrer, Christian A1 - Krause, Ulrich T1 - Einflussgrößen auf die Selbstentzündung von Schüttgütern und Stäuben T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Nuremberg, Germany DA - 2008-03-11 PY - 2008 AN - OPUS4-17326 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Dilz, Karsten A1 - Krull, R. A1 - Heyder, R. T1 - Früherkennung von Rollkontakt-Ermüdung (RCF) in Eisenbahnschienen T2 - DGZfP-Dachtagung T2 - DGZfP-Dachtagung CY - St. Gallen, Switzerland DA - 2008-04-28 PY - 2008 AN - OPUS4-17704 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin T1 - Bioceramics with bone-morphology T2 - bone tech 2008 T2 - bone tech 2008 CY - Hanover, Germany DA - 2008-11-07 PY - 2008 AN - OPUS4-17638 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Musolff, André A1 - Müller, Karsten A1 - Neumann, Martin A1 - Kadji, Arsène Brice A1 - Droste, Bernhard T1 - Drop Test Results of the Full-scale CONSTOR V/TC Prototype T2 - PATRAM 2007 - 15th International symposium on the packaging and transportation of radioactive materials (Proceedings) T2 - PATRAM 2007, 15th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Miami, Florida, USA DA - 2007-10-21 PY - 2007 IS - Abstract #65 SP - 1 EP - 7 PB - Institute of Nuclear Materials Management AN - OPUS4-17838 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reinsch, Stefan A1 - Gaber, Martin A1 - Müller, Ralf A1 - Schiller, Wolfgang Arno T1 - Rate controlled debindering of glass ceramic composites JF - Advanced materials research N2 - Green compacts of ceramics, glass ceramic composites and sinter glass ceramics contain different amounts of organic materials added as pressing aids or binders. Before sintering, these organics have to burn out completely. In oxidising atmospheres, the debindering process is mostly exothermic and therefore difficult to control. This uncontrolled heat production due to locally enhanced debindering and respective gas release may cause damages in the green compact microstructure. Therefore, debindering is usually operated with very low heating rates (< 3 K/min) which requires long processing times of many hours. In this paper, we will show that it is possible to reduce the processing time for debindering dramatically by using the decomposition rate of the organic binder, detected by the weight loss of the sample, as a control factor of the furnace. T2 - 9th ESG (European Society of Glass) Conference with the Annual Meeting of the ICG Glass - "The challenge for the 21st century" CY - Trencin, Slovakia DA - 2008-06-22 KW - Debindering KW - Thermo gravimetry KW - Glass ceramic composites PY - 2005 SN - 1022-6680 SN - 1662-8985 VL - 39-40 SP - 583 EP - 586 PB - Trans Tech Publ. CY - Zurich AN - OPUS4-17840 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Pauli, Jutta A1 - Jäger, Christian T1 - Influence of polyvinylpyrrolidone (PVP) on alumina sols prepared by a modified Yoldas procedure JF - Journal of sol gel science and technology N2 - Al13 polycations containing alumina sols, prepared by a modified Yoldas procedure were mixed with polyvinylpyrrolidone (PVP). Although Al speciation in freshly prepared sols was not affected by PVP addition the decay rate of Al13 polycations was slightly decreased in PVP-containing sols. PVP does not show any influence on particle size and particle growth. The influence of PVP addition on viscosity and flow behavior of modified Yoldas sols depends on their solids content and NO3-/Al molar ratio. KW - ModifiedYoldas sols KW - PVP KW - NMR KW - Rheology KW - Particle size KW - Aging PY - 2008 DO - https://doi.org/10.1007/s10971-008-1798-9 SN - 0928-0707 SN - 1573-4846 VL - 47 IS - 3 SP - 260 EP - 267 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-17854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Dörfel, Ilona A1 - Saliwan Neumann, Romeo T1 - Influence of sol-gel derived alumina coatings on oxide scale growth of nickel-base superalloy Inconel-718 JF - Surface and coatings technology N2 - Alumina coatings with differing phase compositions were deposited on Inconel-718 (IN-718) Ni-base superalloy substrates using sol–gel processing. Mass gain measurements served for studying the oxidation behavior of coated metal surfaces if exposed to 800°C and 900°C for up to 4000 h in static air. Itwas found, that alumina coatings significantly reduce the oxidation related mass gain of IN-718 even after heating to 900°C for 4000 h. Transmission electron microscopy (TEM) studies revealed diffusion of elements from the metal substrate (IN-718) into the alumina coatings and — to a much lower degree — from the coating into the substrate. These diffusion processes are greatly influenced by the phase composition of the coatings, especially by the presence of alpha-alumina. KW - Oxide scale growth KW - Inconel-718 KW - Alumina coating KW - TEM PY - 2008 DO - https://doi.org/10.1016/surfcoat.2008.07.018 SN - 0257-8972 VL - 202 SP - 6095 EP - 6102 PB - Elsevier Science CY - Lausanne AN - OPUS4-17857 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Thomas Böllinghaus, ED - Masaki Kitagawa, ED - Teruo Kishi, ED - Jürgen Lexow, T1 - Computational modelling of the self-ignition process to achieve safe storage of biomass T2 - 1st World Materials Research Institutes Forum (WMRIF) - Workshop for young materials scientists, July 22-25, 2008, Tsukuba, Ibaraki, Japan (Proceedings) T2 - 1st World Materials Research Institutes Forum (WMRIF) - Workshop for young materials scientists CY - Tsukuba, Ibaraki, Japan DA - 2008-07-22 KW - Self-ignition KW - Fire prevention KW - Storage KW - Biomass KW - Bulk materials PY - 2008 SN - 978-4-9900563-3-9 SP - XXII 1 EP - 16 CY - Tsukuba, Ibaraki, Japan AN - OPUS4-17861 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Constantinescu, B. A1 - Bugoi, R. A1 - Cojocaru, V. A1 - Calligaro, Th. A1 - Salomon, J. A1 - Pichon, L. A1 - Roehrs, St. A1 - Ceccato, D. T1 - Micro-SR-XRF and Micro-PIXE studies for archaeological gold identification - The case of Carpathian (Transylvanian) gold and of Dacian bracelets T2 - Ecaart 9 T2 - Ecaart 9 CY - Florence, Italy DA - 2007-09-03 PY - 2007 AN - OPUS4-17862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Martin A1 - Wille, Frank ED - Topping, B. H. V. ED - M. Papadrakakis, T1 - Simulation of the Crushing of Wood Filled Impact Limiters for Packages of Radioactive Material T2 - 9th International Conference on Computational Structures Technology, September 2-5, 2008, Athens, Greece (Proceedings) N2 - Mechanical and thermal safety assessment of packages for transport of radioactive material in Germany is carried out by the Federal Institute for Materials Research and Testing (BAM). Both experimental and computational (analytical, numerical) methods combined with material and/or component tests are the basis for the state of the art safety assessment concept at BAM. The required mechanical tests according to IAEA regulations include, among others, a 9-m-drop-test on an unyielding target. Impact limiting components, which are attached to the cask at both ends, limit forces applied on the cask body and lid system by absorbing a major part of the impact energy. In Germany, impact limiters of packages for transport of radioactive materials are typically of steel-wood-sandwich construction, combining a relatively stiff steel structure bolted to the cask body, outer steel plates and different types of wood. By crushing the wood-steel-sandwich-structure between an unyielding target and the cask, the kinetic energy of a 9-m-free-fall is absorbed. The main energy absorber is wood under a high level of deformation. Wood under large deformations exhibits destruction of the fibre matrix. By analysing compression of the impact limiter wood after the drop tests with prototype casks for radioactive material, underlying mechanisms of wood crushing and corresponding energy absorption under large deformations are identified. Softening occuring at compression of the wood is a function of the lateral strain restriction of wood. Against the background of continuum mechanics an analogous model for compression of the fibre bundle is presented. The model takes the lateral strain restriction as triaxiality of the stress state into account. Further modelling possibilities for wood with a continuum approach are described. Different material laws in the explicit finite element code LS-DYNA are analysed for possible application using the analogous model for the fibre bundle. Small scale compression tests with wooden specimens are modelled in order to evaluate the ability of different modelling techniques to simulate softening. Although modelling of the compression of wood under large deformations is possible, softening could not be simulated purposefully. A drop test of a cask with impact limiting devices similar to existing impact limiters is simulated with different material laws for wood. The behaviour of impact limiting devices could not be simulated universally including the influence of the lateral strain restriction; nevertheless loading of the cask by crushing of the impact limiter could be simulated purposefully. Verification with experimental results is essential. T2 - 9th International Conference on Computational Structures Technology CY - Athens, Greece DA - 2008-09-02 KW - Radioactive material KW - Transport KW - Impact limiter KW - Simulation KW - FEM PY - 2008 SN - 978-1-905088-22-5 IS - Paper 22 SP - 1 EP - 21 PB - Civil Comp Press CY - Stirlingshire, Scotland, UK AN - OPUS4-17891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Strub, E. A1 - Guerra, M.-F. A1 - Reiche, I. T1 - SR-XRF analysis of trace amounts of Pt in gold alloys T2 - European Conference on X-ray Spectrometry T2 - European Conference on X-ray Spectrometry CY - Dubrovnik, Croatia DA - 2008-06-16 PY - 2008 AN - OPUS4-17845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Marklein, R. A1 - Mayer, K. A1 - Zimmer, A. A1 - Krause, Martin T1 - Ganzheitliche Methoden zur zerstörungsfreien Prüfung von Betonbauteilen - Modellierung, Abbildung und Charakterisierung von Verpressfehlern in Hüllrohren JF - Technisches Messen N2 - Für die zerstörungsfreie Prüfung großer Betonbauwerke unter dem Aspekt der Analyse von Spannkanälen hat sich die Ultraschalltechnik in den letzten Jahren als geeignete Methode herausgestellt, da sowohl die Messtechnik – insbesondere die Ultraschallwandler – als auch die numerischen Auswerteverfahren in einem Stadium sind, das es erlaubt, größere Messflächen und damit größere Volumina zu beschallen und abzubilden. Mit Hilfe der Modellierung der Ausbreitung elastischer Wellen in komplexen Medien können praxisrelevante Problemstellungen untersucht werden, auch unter dem Aspekt, Testkörper zu planen oder gar zu ersetzen. Durch die Auswertung der Phase der Rekonstruktion eines Streuvorgangs können Fehlstellen klassifiziert und damit Aussagen über die Bauwerkssicherheit signifikant objektiviert werden. Die Methoden werden, im Hinblick auf eine ganzheitliche Sichtweise von skalaren und polarimetrischen Abbildungsverfahren mit Unterstützung der Modellierung und der anschließenden Klassifizierung durch Phasenanalyse, an ausgewählten Beispielen erläutert. For nondestructive testing of concrete buildings under the aspect of tendon duct analysis, ultrasonic testing has proven to be a suitable method, as both the measuring technique – in particular the acoustic sensors – and the numerical methods allow the insonification and imaging of larger surfaces and volumes. With the aid of numerical modelling of elastic wave propagation in complex media real life problems can be examined with the goal to design or even to replace test specimen. By determination of the phase of an imaged scattering event, defects can be classified, and the prediction of the integrity of buildings can be significantly objectified. The methods are explained for selected examples in an integral way with respect to scalar and polarimetric imaging algorithms supported by modelling and subsequent classification through phase analysis. KW - Elastische Wellenausbreitung KW - Numerische Modellierung KW - Polimetrische Abbildungsverfahren KW - Phasenauswertung KW - Beton KW - Spannkanäle KW - Verpressfehler KW - Elastic wave propagation KW - Numerical modelling KW - Polarimetric imaging KW - Phase analysis KW - Concrete KW - Tendon ducts KW - Grouting defects PY - 2008 DO - https://doi.org/10.1524/teme.2008.0868 SN - 0340-837X SN - 0178-2312 SN - 0171-8096 VL - 75 IS - 6 SP - 376 EP - 389 PB - Oldenbourg CY - München AN - OPUS4-18235 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Urs A1 - Riedl, Martin ED - Jadwiga W. Lukaszewicz, ED - Piotr Niemcewicz, T1 - Volcanic tuff from Ettringen, Germany and its interaction with agents used for stone conservation T2 - 11th International Congress on Deterioration and Conservation of Stone, September 15-20, 2008, Torun, Poland (Proceedings) T2 - 11th International Congress on Deterioration and Conservation of Stone CY - Torun, Poland DA - 2008-09-15 KW - Volcanic tuff KW - Consolidation KW - Ethyl silicate KW - Swelling reducer KW - Hygric expansion PY - 2008 SN - 978-83-231-2237-1 VL - II SP - 1001 EP - 1009 PB - Nicolaus Copernicus University Press CY - Torun, Poland AN - OPUS4-18175 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Berechnung des Wärme- und Stofftransportes bei Schüttgutbränden T2 - Tagungsunterlagen, CD mit Manuskripten und PowerPoint-Präsentationen / 7. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 7. Fachtagung Arbeits-, Anlagen- und Umweltsicherheit CY - Köthen, Deutschland DA - 2004-11-04 PY - 2004 PB - VDI-Verl. CY - Halle AN - OPUS4-4906 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lohrer, Christian A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Bewertungskriterien für die Selbstentzündung von Schüttgütern, Stäuben und porösen Feststoffen JF - Chemie - Ingenieur - Technik KW - Selbstentzündung KW - Warmlagerung KW - Schüttgut KW - Brennbarer Staub PY - 2004 DO - https://doi.org/10.1002/cite.200400072 SN - 0009-286X SN - 1522-2640 VL - 76 IS - 7 SP - 936 EP - 940 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-4907 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Mielentz, Frank A1 - Streicher, Doreen A1 - Milmann, Boris A1 - Gardei, André A1 - Kohl, Christoph A1 - Wiggenhauser, Herbert T1 - Complementary application of radar, impact-echo and ultrasonics for testing concrete structures and metallic tendon ducts T2 - Proceedings of the 83rd Annual Meeting Transportation Research Board of the National Academies T2 - 83rd Annual Meeting Transportation Research Board of the National Academies CY - Washington, D. C., USA DA - 2004-01-11 KW - Non-destructive testing KW - Tendon duct KW - Concrete bridge KW - Radar KW - Ultrasonic KW - Impact-echo PY - 2004 SP - 18 pages CY - Washington AN - OPUS4-4909 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Starke, K. A1 - Ristau, D. A1 - Martin, Sven A1 - Hertwig, Andreas A1 - Krüger, Jörg A1 - Allenspacher, P. A1 - Riede, W. A1 - Meister, S. A1 - Theiss, C. A1 - Sabbah, A. A1 - Rudolph, W. A1 - Raab, V. A1 - Grigonis, R. A1 - Rakickas, T. A1 - Sirutkaitis, V. ED - Exarhos, G. J. T1 - Results of a round-robin experiment in multiple-pulse LIDT measurement with ultrashort pulses T2 - Laser-induced damage in optical materials - 2003 T2 - 35th Annual Boulder Damage Symposium ; 35th Annual Symposium on Optical Materials for High-Power Lasers CY - Boulder, CO, USA DA - 2003-09-22 KW - Multiple-pulse damage KW - ISO 11254-2 KW - S on 1-LIDT KW - Round-robin experiment KW - CHOCLAB PY - 2004 SN - 0-8194-5163-0 DO - https://doi.org/10.1117/12.525135 SN - 0038-7355 N1 - Serientitel: Proceedings of SPIE – Series title: Proceedings of SPIE IS - 5273 SP - 388 EP - 395 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-4948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Martin T1 - Numerische Simulation von Heißrisstests T2 - 4. Berliner Gemeinschaftskolloquium "Innovative Fügetechnik aus der Forschung für die industrielle Anwendung" T2 - 4. Berliner Gemeinschaftskolloquium "Innovative Fügetechnik aus der Forschung für die industrielle Anwendung" CY - Berlin, Germany DA - 2004-05-18 PY - 2004 AN - OPUS4-4926 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Martin T1 - Fremdbeanspruchter Heißrisstest T2 - Sitzung des DIN AA5.1/NMP/AGQ4 T2 - Sitzung des DIN AA5.1/NMP/AGQ4 CY - Berlin, Germany DA - 2004-12-11 PY - 2004 AN - OPUS4-4939 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas T1 - Untersuchung zur Herstellung Ochratoxin A belasteter Referenzmaterialien T2 - InCom T2 - InCom CY - Düsseldorf, Germany DA - 2003-03-25 PY - 2003 AN - OPUS4-5857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas A1 - Töpfer, Antje A1 - Nehls, Irene T1 - Bestimmung von Ochratoxin A in Wein mittels LC-MS/MS nach kombiniertem Anionenaustauscher/Resersed Phase clean up T2 - ANAKON 2005 T2 - ANAKON 2005 CY - Regensburg, Germany DA - 2003-03-15 PY - 2003 AN - OPUS4-5872 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hattwig, Martin A1 - Krause, Ulrich A1 - Proust, C. ED - Steen, H. T1 - Explosionsdruckentlastung T2 - Handbuch des Explosionsschutzes PY - 2000 SN - 3-527-29848-7 SP - 577 EP - 618 PB - Wiley-VCH CY - Weinheim AN - OPUS4-6894 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hattwig, Martin A1 - Krause, Ulrich A1 - Proust, C. ED - Hattwig, M. T1 - Explosion Venting T2 - Handbook of explosion prevention and protection PY - 2004 SN - 3-527-30718-4 SP - 493 EP - 530 PB - Wiley-VCH CY - Weinheim AN - OPUS4-6896 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Görner, Wolf A1 - Berger, Achim A1 - Merchel, Silke A1 - Pernicka, E. A1 - Radtke, Martin A1 - Reiche, I. A1 - Reinholz, Uwe A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Wunderlich, C. H. T1 - Kunst- und Kulturgüter unter "Beschuss" T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2004 T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - SY-RFA KW - PIXE KW - PIGE KW - PAA KW - Zerstörungsfreie Analyse KW - Silberstiftzeichnungen KW - Himmelsscheibe von Nebra KW - Indische Moghulmalereien PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/p46/p46.htm SN - 3-931381-55-2 SP - 1(?) EP - 11(?) PB - DGZfP CY - Berlin AN - OPUS4-6897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Denker, A. A1 - Hahn, Oliver A1 - Merchel, Silke A1 - Radtke, Martin A1 - Kanngießer, B. A1 - Malzer, W. A1 - Röhrs, S. A1 - Reiche, I. A1 - Stege, H. T1 - Röntgenanalytik für Kunstwerke und Kulturgüter JF - Nachrichten aus der Chemie N2 - Naturwissenschaftler arbeiten mit Archäologen, Kunsthistorikern und Restauratoren zusammen, um Materialinformationen über Kunstwerke mit den Erkenntnissen aus Altertumsforschung, Kunstgeschichte und Denkmalpflege zu verbinden. Röntgenfluoreszenz und Röntgenemission sind die Methoden der Wahl, wenn wertvolle und fragile Objekte zerstörungsfrei zu untersuchen sind. KW - Synchrotron KW - XRF analysis KW - Drawings KW - Paintings KW - Ink KW - Art objects KW - Archaeometry KW - Röntgenfluoreszenzanalyse (RFA) KW - Zeichnungen KW - Gemälde KW - Tinten KW - Kunstobjekte KW - Archäometrie PY - 2005 SN - 1439-9598 SN - 1521-3854 VL - 53 IS - 2 SP - 118 EP - 123 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-6898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - König, S. A1 - Diersch, R. A1 - Lührmann, A. A1 - Müller, Karsten A1 - Neumann, Martin A1 - Quercetti, Thomas A1 - Droste, Bernhard T1 - Full-scale Drop Testing of the CONSTOR V/TC Package - Program and Preliminary Results JF - Journal of nuclear materials management KW - Fallversuche KW - Transportbehälter für radioaktive Stoffe PY - 2005 SN - 0893-6188 VL - 33 IS - 3 SP - 4 EP - 10 PB - Institute of Nuclear Materials Management CY - Northbrook, Ill. AN - OPUS4-6875 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Deppe, Hans-Joachim A1 - Gersonde, Martin T1 - Zur Herstellung geschützter Holzwerkstoffe des Typs "100 G" JF - Holz-Zentralblatt PY - 1980 SN - 0018-3792 VL - 106 IS - 9 SP - 139 EP - 141 PB - DRW-Verl. Weinbrenner CY - Leinfelden-Echterdingen AN - OPUS4-9361 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Kerner-Gang, Waltraut T1 - Fachgruppe "Biologische Materialprüfung" in der Bundesanstalt für Materialprüfung in Berlin-Dahlem - Porträt JF - Forum Mikrobiologie PY - 1980 SN - 0170-8244 IS - 3 SP - 149 EP - 151 PB - Giebeler CY - Darmstadt AN - OPUS4-9368 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Naseband, Klaus A1 - Martin, Erich A1 - Helms, Rolf T1 - Einfluss der Probenform auf das Ergebnis des Kerbschlagbiegeversuches T2 - Forschungsberichte des Landes Nordrhein-Westfalen PY - 1968 SN - 0367-2492 IS - 1908 SP - 1 EP - 50 PB - Westdt. Verl. CY - Köln AN - OPUS4-10626 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin T1 - Schutzbehandlung von Fichtenholzmasten durch Saftverdrängungsverfahren JF - Holz-Zentralblatt PY - 1968 SN - 0018-3792 VL - 94 IS - 39 SP - 599 EP - 601 PB - DRW-Verl. Weinbrenner CY - Leinfelden-Echterdingen AN - OPUS4-10672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Deppe, Hans-Joachim T1 - Möglichkeiten und verfahrenstechnische Vorraussetzungen einer Schutzbehandlung von Holzspanplatten gegen holzzerstörende Pilze JF - Holz-Zentralblatt PY - 1968 SN - 0018-3792 VL - 94 IS - 60 SP - 876 EP - 877 PB - DRW-Verl. Weinbrenner CY - Leinfelden-Echterdingen AN - OPUS4-10673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Kerner-Gang, Waltraut T1 - Untersuchungen an Moderfäule-Pilzen aus Holzstäben nach Freilandversuchen JF - Material und Organismen = Materials and organisms = Matériaux et organismes PY - 1968 SN - 0025-5270 VL - 3 IS - 3 SP - 199 EP - 212 PB - Duncker & Humblot CY - Berlin AN - OPUS4-10674 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ritter, Martin A1 - Dziomba, T. A1 - Kranzmann, Axel A1 - Koenders, L. T1 - A landmark based 3D calibration strategy for SPM T2 - Nanoscale 2006, METAS T2 - Nanoscale 2006, METAS CY - Wabern, Switzerland DA - 2006-04-24 PY - 2006 AN - OPUS4-12174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina T1 - Komplexe Widerstandstomografie an stehenden Bäumen T2 - Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) an der Universität Bremen T2 - Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) an der Universität Bremen CY - Bremen, Germany DA - 2006-03-06 PY - 2006 AN - OPUS4-12166 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Berger, Achim A1 - Görner, Wolf A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Roth, M. T1 - Following the traces of Albrecht Dürer: analysis of silverpoint drawings by spatially resolved synchrotron-induced X-ray fluorescence analysis JF - Nuclear instruments and methods in physics research B N2 - Spatially resolved X-ray fluorescence analysis using synchrotron radiation (SR-XRF) at the wavelength shifter beamline, BAMline, at BESSY was used to investigate Renaissance silverpoint drawings as it is extremely sensitive, non-destructive and can be carried out in air using an excitation spot in the hundred micrometer range. This paper deals with first results of the study of silverpoint drawings of Albrecht Dürer (1471–1528) belonging to the sketchbook that Albrecht Dürer used during a travel to the Netherlands in 1520/21. These results are compared to a PIXE study performed on drawings from the same sketchbook. The minor element composition of the silverpoint used for the drawings in the sketchbook was (10.6 ± 3.5) wt.% of Cu and traces of Zn. Mercury was found in the marks but does not belong to the initial composition of the silverpoint as it is attributed to an alteration phenomenon. One drawing of the sketchbook represents an exception. It consists of silver marks containing an additional minor element, Zn, in the marks and was, therefore, created with another silverpoint, probably at a different time than the other drawings. KW - Synchrotron KW - SR-XRF analysis KW - Drawing KW - Silverpoint KW - Albrecht Dürer PY - 2004 DO - https://doi.org/10.1016/j.nimb.2004.03.081 SN - 0168-583X SN - 1872-9584 VL - 226 IS - 1-2 SP - 83 EP - 91 PB - Elsevier CY - Amsterdam AN - OPUS4-4574 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Radtke, Martin A1 - Berger, Achim A1 - Görner, Wolf A1 - Ketelsen, T. A1 - Merchel, Silke A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Roth, M. T1 - Spatially resolved synchrotron-induced X-ray fluorescence analyses of metal point drawings and their mysterious inscriptions JF - Spectrochimica acta B N2 - Synchrotron-induced X-ray fluorescence (Sy-XRF) analysis was used to study the chemical composition of precious Renaissance silverpoint drawings. Drawings by famous artists such as Albrecht Dürer (1471–1528) and Jan van Eyck (approximately 1395–1441) must be investigated non-destructively. Moreover, extremely sensitive synchrotron- or accelerator-based techniques are needed since only small quantities of silver are deposited on the paper. New criteria for attributing these works to a particular artist could be established based on the analysis of the chemical composition of the metal points used. We illustrate how analysis can give new art historical information by means of two case studies. Two particular drawings, one of Albrecht Dürer, showing a profile portrait of his closest friend, “Willibald Pirckheimer” (1503), and a second one attributed to Jan van Eyck, showing a “Portrait of an elderly man”, often named “Niccolò Albergati”, are the object of intense art historical controversy. Both drawings show inscriptions next to the figures. Analyses by Sy-XRF could reveal the same kind of silverpoint for the Pirckheimer portrait and its mysterious Greek inscription, contrary to the drawing by Van Eyck where at least three different metal points were applied. Two different types of silver marks were found in this portrait. Silver containing gold marks were detected in the inscriptions and over-subscriptions. This is the first evidence of the use of gold points for metal point drawings in the Middle Ages. KW - Sy-XRF analysis KW - Drawing KW - Metal point KW - Albrecht Dürer KW - Jan van Eyck KW - Renaissance PY - 2004 DO - https://doi.org/10.1016/j.sab.2004.07.023 SN - 0584-8547 SN - 0038-6987 VL - 59 IS - 10-11 SP - 1657 EP - 1662 PB - Elsevier CY - Amsterdam AN - OPUS4-4575 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - Der Kompilanz-Modus als Methode zur Charakterisierung der Interphase faserverstärkter Polymere T2 - 2. Workshop Raster-Sonden-Mikroskopie an Polymeren im Rahmen des Jahreskolloquiums des SFB 239 T2 - 2. Workshop Raster-Sonden-Mikroskopie an Polymeren im Rahmen des Jahreskolloquiums des SFB 239 CY - Ulm, Germany DA - 1996-11-22 PY - 1996 AN - OPUS4-6401 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Reiche, I. A1 - Berger, Achim A1 - Bevers, H. A1 - Dupuis, G. A1 - Duval, A. A1 - Görner, Wolf A1 - Guicharnaud, H. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Riederer, J. A1 - Riesemeier, Heinrich A1 - Roth, M. T1 - Spatially resolved SR-XRF analyses of complex drawings by the Holbein family and silverpoint drawings by Rembrandt T2 - BESSY highlights - annual report 2004 KW - X-ray spectrometry KW - XRF KW - Röntgenfluoreszenzanalyse KW - RFA KW - Silverpoint drawing KW - Silberstiftzeichnung PY - 2005 UR - http://www.helmholtz-berlin.de/media/media/oea/web/pr_webseite/druckschriften/berichte/bessy/annualreport2004.pdf#page=491 SN - 0179-4159 SP - 491 EP - 493 PB - Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung CY - Berlin AN - OPUS4-7380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin T1 - Small Molecules in Polymers and Polymer based Nanocomposites - Molecular Probes for Material Characterization and Design T2 - Polydays 2004 (Berliner Polymerentage); Universität Potsdam, Campus "Am Neuen Palais" T2 - Polydays 2004 (Berliner Polymerentage); Universität Potsdam, Campus "Am Neuen Palais" CY - Potsdam, Germany DA - 2004-10-04 PY - 2004 AN - OPUS4-7297 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf T1 - Thermisch induzierte Wasserstoffabgabe aus Quarzgläsern T2 - 79. Glastechnische Tagung T2 - 79. Glastechnische Tagung CY - Würzburg, Germany DA - 2005-05-23 PY - 2005 AN - OPUS4-11780 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Reinsch, Martin A1 - Lehmann, Andreas A1 - Töpfer, Antje A1 - Nehls, Irene T1 - Bestimmung von Ochratoxin A in Wein mittels LC-MS/MS nach kombiniertem Anionenaustauscher/Reversed Phase clean up T2 - ANAKON 2005 T2 - ANAKON 2005 CY - Regensburg, Germany DA - 2005-03-15 PY - 2005 AN - OPUS4-11716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kroggel, O. A1 - Krause, Martin A1 - Schickert, M. A1 - Langenberg, K.-J. T1 - Moderne Verfahren der Bauwerksdiagnose, Entwicklung und Anwendung - Die DFG-Forschergruppe FOR384 stellt ihre Ergebnisse vor - Ultraschall T2 - Fachtagung des Deutschen Ausschusses für Stahlbeton 2005 - Zerstörungsfreie Prüfverfahren und Bauwerksdiagnose im Betonbau T2 - Fachtagung 2005 des Deutschen Ausschusses für Stahlbeton in Zusammenarbeit mit der Bundesanstalt für Materialforschung und -prüfung "Zerstörungsfreie Prüfverfahren und Bauwerksdiagnose im Betonbau" CY - Berlin, Deutschland DA - 2005-03-10 KW - Ultraschallecho-Verfahren KW - Beton KW - Fundamente KW - Erhärtungsverhalten KW - Tomographie PY - 2005 SP - A5 EP - A10 PB - BAM CY - Berlin AN - OPUS4-11718 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wolf, Martin A1 - Kannengießer, Thomas T1 - Moderne Prüfverfahren zur Bestimmung der Heißrisssicherheit beim Schweißen von hochlegierten Stählen und Nickelbasislegierungen / Modern test methods for assesing the hot crack resistance during welding of high-alloyed steels and nickel base alloys T2 - Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung - Tagungsband Werkstoffprüfung 2005 T2 - DVM-Tagung "Werkstoffprüfung 2005" CY - Berlin, Deutschland DA - 2005-12-01 KW - Heißrisse KW - Probenbeanspruchungsgeschwindigkeit KW - MVT-Test KW - Alloy 602 CA (Werkstoff-Nr.: 2.4633, NiCr25FeAlY) KW - Hot cracks KW - Test velocity KW - MVT-Test KW - Alloy 602 CA (material-No.: 2.4633, NiCr25FeAlY) PY - 2005 SN - 1861-8154 N1 - Serientitel: DVM-Bericht – Series title: DVM-Bericht IS - 641 SP - 419 EP - 426 PB - DVS-Verl. CY - Berlin AN - OPUS4-11726 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heuchel, M. A1 - Böhning, Martin A1 - Hölck, Ole A1 - Siegert, M.R. A1 - Hofmann, D. T1 - Atomistic Packing Models for Experimentally Investigated Swelling States Induced by CO2 in Glassy Polysulfone and Poly(ether sulfone) JF - Journal of polymer science B, polymer physics N2 - Atomistic packing models have been created, which help to better understand the experimentally observed swelling behavior of glassy polysulfone and poly (ether sulfone), under CO2 gas pressures up to 50 bar at 308 K. The experimental characterization includes the measurement of the time-dependent volume dilation of the polymer samples after a pressure step and the determination of the corresponding gas concentrations by gravimetric gas-sorption measurements. The models obtained by force-field-based molecular mechanics and molecular dynamics methods allow a detailed atomistic analysis of representative swelling states of polymer/gas systems, with respect to the dilation of the matrix. Also, changes of free volume distribution and backbone mobility are accessible. The behavior of gas molecules in unswollen and swollen polymer matrices is characterized in terms of sorption, diffusion, and plasticization. KW - Molecular modeling KW - Volume dilation KW - Gas sorption KW - Poly(ether sulfones) KW - Free volume KW - Swelling KW - Molecular dynamics KW - Diffusion KW - Plasticization PY - 2006 DO - https://doi.org/10.1002/polb.20844 SN - 0887-6266 SN - 1099-0488 VL - 44 IS - 13 SP - 1874 EP - 1897 PB - Wiley CY - Hoboken, NJ AN - OPUS4-12398 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Urech, L. A1 - Lippert, T. A1 - Wokaun, A. A1 - Martin, Sven A1 - Mädebach, Heinrich A1 - Krüger, Jörg T1 - Removal of doped poly(methylmetacrylate) from tungsten and titanium substrates by femto- and nanosecond laser cleaning JF - Applied surface science N2 - The influence of different laser pulse lengths on the removal of a polymer layer from metal substrates was investigated. As model systems, doped poly(methylmetacrylate) (PMMA) on titanium and tungsten substrates were selected. The ablation threshold and irradiation spot morphology of titanium and tungsten were compared for femtosecond (fs) and nanosecond (ns) laser irradiation and different pulse numbers. Nanosecond laser treatment resulted in a non-homogeneous surface morphology for both titanium and tungsten substrates. Femtosecond irradiation of tungsten revealed a homogeneous ablation spot with little changes in the surface morphology. For titanium, the formation of columnar structures within the irradiation spot was observed. Two different dopant concentrations were used for PMMA to achieve an equal linear absorption coefficient for the femto- and nanosecond laser wavelengths of 790 and 1064 nm. The best results were achieved for the removal of doped PMMA by femtosecond laser irradiation, where only a minimal modification of the metal surface was detected. In the case of nanosecond laser exposure, a pronounced change of the structure was observed, suggesting that damage-free cleaning of the selected metal may only be possible using femtosecond laser pulses. Different experimental parameters, such as laser fluence, pulse repetition rate and sample speed were also investigated to optimize the cleaning quality of doped PMMA from tungsten substrates with femtosecond laser pulses. KW - Poly(methylmetacrylate) KW - Laser treatment KW - Tungsten KW - Titanium KW - Femtosecond PY - 2006 DO - https://doi.org/10.1016/j.apsusc.2005.07.109 SN - 0169-4332 SN - 1873-5584 VL - 252 IS - 13 SP - 4754 EP - 4758 PB - North-Holland CY - Amsterdam AN - OPUS4-12368 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nofz, Marianne A1 - Pauli, Jutta A1 - Dreßler, Martin A1 - Jäger, Christian A1 - Altenburg, Wolfgang T1 - 27Al NMR Study of Al-Speciation in Aqueous Alumina-Sols JF - Journal of sol gel science and technology N2 - A new method of preparing concentrated alumo-sols, the hydrolysis of Al-tri-sec-butylate in acidic aqueous media at 85°C, was studied in detail by varying the H2O/Al- and NO3 -/Al-ratios in wide ranges. The components of the sols were characterized by 27Al NMR spectroscopy. The pH-value depends on both the chosen H2O/Al- and NO3 -/Al-ratio and on the aging time of the sols and reflects the composition of the sols. Al13 polycations were detected in sols with a pH-value between 3.0 and 3.7. As a new result its presence was shown by NMR below 3.4. The Al13 content of the sols increased with pH and the maximum fraction of Al13 polycations was detected in the sol with the highest pH (3.7). Nearly 65% of the entire aluminium content of this solution is bound in the Al13 polycations. Hence, a new synthetic method for the preparation of Al13 ions containing sols was developed. Aging studies of the sols showed, that the Al13 polycations were more stable in solutions with higher pH-value. Al13 polycations were detected after an aging time of four months only in sols with a pH-value of 3.7. Tempering the aged sols at 40° to 80°C caused formation of Al13 and also of Al30 polycations. KW - Alumo-sol KW - Al13 polycations KW - Al-27 NMR spectroscopy PY - 2006 SN - 0928-0707 SN - 1573-4846 VL - 38 IS - 1 SP - 25 EP - 35 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-12350 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Munz, Martin T1 - Evidence for a three-zone interphase with complex elastic-plastic behaviour - nanoindentation study of an epoxy/thermoplastic composite JF - Journal of physics D N2 - A detailed study of the mechanical interphase (IP) between an amine-cured epoxy and the amorphous thermoplastic polyvinylpyrrolidone (PVP) was performed. The amine curing agent was diaminodiphenylsulphone (DDS). With 170 °C, the curing temperature was close to the glass transition temperature of PVP. Using a depth-sensing indentation setup equipped with a Berkovich indenter, force penetration curves were measured at different positions on the cross-section of an epoxy/PVP/epoxy sandwich specimen. Profiles of the sample Young's modulus, Es, the hardness, H, and the plasticity index, ψ, were analysed as a function of the distance from the epoxy/PVP interface. Each of these quantities showed significant variations. Furthermore, the profile of the ratio between the reduced modulus of the tip–sample contact, Er, and the hardness is shown to reflect the profile of the plasticity index, that is the relative amount of plastic indentation work. A relationship is presented that allows the calculation of the plasticity index from the ratios Er/H and hf/hc, where hf and hc denote the final depth and the contact depth, respectively. Although the Young's modulus shows strong variations, the hardness appears to be the most sensitive parameter for IP property variations. Three different zones can be identified from the hardness profile, with respective widths of ~21.3, 52.5 and 160.9 µm, which add up to a total IP width of ~234.7 µm. Zone Z1 is located next to the PVP layer. The outer edge of zone Z2 is located at a position similar to the one of the amine depletion zone. The latter was detected by means of energy-dispersive analysis of x-rays and its width is ~71 µm. Inspection of the residual imprints shows a larger plastic deformation for zone Z1, in agreement with the high values of the plasticity index and of the creep deformations. From these grounds, the different IP zones are discussed in terms of the diffusion processes taking place during the epoxy curing procedure. Zone Z1 is associated with bi-directional interdiffusion across the initial interface. Zone Z3 can be attributed to long-ranging effects reaching far beyond the amine depletion zone. KW - Interphase KW - Epoxy/thermoplastic composite KW - PVP KW - DDS KW - AFM KW - EDX KW - Polymer interdiffusion PY - 2006 DO - https://doi.org/10.1088/0022-3727/39/18/016 SN - 0022-3727 SN - 1361-6463 VL - 39 IS - 18 SP - 4044 EP - 4058 PB - IOP Publ. CY - Bristol AN - OPUS4-13134 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wendrich, Astrid A1 - Trela, Christiane A1 - Krause, Martin A1 - Maierhofer, Christiane A1 - Effner, Ute A1 - Wöstmann, Jens T1 - Location of voids in masonry structures by using radar and ultrasonic traveltime tomography T2 - 9th European Conference on NDT T2 - 9th European Conference on NDT CY - Berlin, Germany DA - 2006-09-25 PY - 2006 SN - 3-931381-86-2 SP - 1(?) EP - 6(?) PB - European Federation for Non-Destructive Testing CY - Berlin AN - OPUS4-14015 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kluge, Martin A1 - Krause, Heike A1 - Schröder, Volkmar A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Study of a self heating process of tetrafluoroethylene by the exothermic dimerization reaction to octafluorocyclobutane T2 - COMSOL Conference, November 4-6, 2008, Hannover, Germany (Proceedings) T2 - COMSOL Conference CY - Hannover, Germany DA - 2008-11-04 KW - Self heating KW - Free convection KW - Reactive flow KW - Gas reaction PY - 2008 SN - 978-09766792-8-8 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 1 EP - 7 AN - OPUS4-18611 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Meyer-Scherf, Ronald A1 - Kluge, Martin A1 - Ferrero, Fabio A1 - Grasse, Dennis ED - Beyer, M. ED - Stolz, T. T1 - Zündung zerfallsfähiger Gase wie Acetylen und Tetrafluorethen durch adiabate Kompression T2 - 13. BAM/PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik N2 - Die adiabate Kompression stellt insbesondere für zerfallsfähige Gase eine potentielle Zündquelle sowohl bei Herstellungsprozessen als auch beim Umgang in weiter-verarbeitenden Betrieben oder beim Endnutzer dar. Unter bestimmten Bedingungen kann hier eine explosionsartige Zerfallsreaktion auch in Abwesenheit eines Oxidators initiiert werden. Zur systematischen Untersuchung des Zündverhaltens von Zerfallsreaktionen wurde eine Rohrapparatur mit einem schnell öffnenden Kugelhahn aufgebaut, um praxisnahe Vorgänge darstellen zu können. Am Beispiel Tetrafluorethen (TFE) wurden umfangreiche Untersuchungen mit unterschiedlichen Rohrdurchmessern und –längen durchgeführt. Neben der Kompression von homogenen Gasphasen wurden außerdem Kompressionsvorgänge von heterogenen Gasen durchgeführt. Dabei war das Gas im Niederdruckteil unterschiedlich zum Gas im Hochdruckteil. Für den Hochdruckteil wurde Stickstoff, Acetylen und TFE verwendet. Im Niederdruckteil kamen TFE, Stickstoff und Luft zum Einsatz. Zudem wurden das Kompressionsverhältnis sowie die Absolutdrücke im Hochdruck- und Kompressionsteil variiert. Für TFE wurde ein Druckbereich bis 30 bar absolut untersucht. Versuche mit Acetylen wurden zur apparativen Validierung durchgeführt. Es zeigte sich, dass in der verwendeten Apparatur reproduzierbare Zündvorgänge nur im Bereich sehr enger Anfangsparameter möglich sind. Die Kompression von Luft durch ein zerfallsfähiges Gas stellt dabei den sicherheitstechnisch kritischsten Fall dar. T2 - 13. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 18.06.2013 PY - 2013 SN - 978-3-95606-062-5 SN - 1868-5838 N1 - Geburtsname von Meyer-Scherf, Ronald: Meyer, R. - Birth name of Meyer-Scherf, Ronald: Meyer, R. SP - 1 EP - 10 AN - OPUS4-29021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosemann, P. A1 - Müller, Thoralf A1 - Babutzka, Martin A1 - Heyn, Andreas ED - J. Grosch, ED - E.J. Mittemeijer, T1 - Qualitätsbewertung von Schneidwaren durch Kurzzeit-Korrosionsprüfung JF - HTM - journal of heat treatment and materials N2 - Bei der Qualitätsbewertung von Schneidwaren aus nichtrostenden martensitischen Chrom-Stählen stellt die Überprüfung der Korrosionsbeständigkeit ein wichtiges Kriterium dar. Allgemein üblich sind Wechseltauchversuche mit relativ hohem zeitlichem und auswertungsbedingtem Aufwand, die noch dazu zerstörend sind und teilweise fragwürdige Ergebnisse liefern. In den letzten Jahren wurden neue Ansatze der Prüfung geschaffen, die eine nahezu zerstörungsfreie Kurzzeit-Korrosionsprüfung erlauben. Es wird gezeigt, dass mit dem elektrochemischen Rauschen sehr empfindlich Einflüsse des Härtens und der Oberflächenbehandlung auf die Korrosionsbeständigkeit nachgewiesen werden können, wodurch eine schnelle und objektive Qualitätsbewertung innerhalb des Fertigungsprozesses und der Endkontrolle von Produkten möglich ist. Das für die Prüfmethodik ausgenutzte Phänomen des elektrochemischen Rauschens zielt darauf ab, den Beginn der Korrosion empfindlich und schnell zu detektieren, ohne die Prüfbedingungen maßlos zu verschärfen und Produkte damit zu zerstören. Neben der Funktionalität der Prüfung stehen aber auch die Anwenderfreundlichkeit und somit die Akzeptanz bei den Herstellern im Vordergrund. Aus diesem Grund wurde zusätzlich ein Indikatortest (KorroPad) als praxistaugliche Alternative zum elektrochemischen Rauschen angewendet. Die Ergebnisse zeigen eine gute Übereinstimmung beider Methoden und ermöglichen eine effektive betriebliche Qualitätsüberwachung von Schneidwaren. KW - Schneidwaren KW - Nichtrostender Stahl KW - Korrosion KW - Prüfmethoden KW - Qualitätskontrolle KW - Cutlery KW - Stainless steel KW - Corrosion KW - Testing methods KW - Quality control PY - 2013 DO - https://doi.org/10.3139/105.110195 SN - 1867-2493 VL - 68 IS - 5 SP - 224 EP - 235 PB - Hanser CY - München AN - OPUS4-29341 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Effner, Ute A1 - Müller, Sabine A1 - Nowak, Thomas Rudolf A1 - Vergin, Dirk T1 - 3D-SAFT Imaging von Streuern in Brettschichtholz T2 - DGZfP-Jahrestagung 2013 N2 - Aktuell wird die Ultraschallechotechnik für Holzbauteile genutzt, indem aus der Abschattung eines ansonsten stabilen Rückwandechos auf Auffälligkeiten im Holzbauteil geschlossen wird. Dabei werden Transversalwellen (Mittenfrequenz 50 kHz) mit der Polarisationsrichtung in Faserrichtung (L) angewendet. In einem 2012 abgeschlossenen Forschungsvorhaben wurde nun die direkte Abbildung von Streuern durch anisotrope SAFT-Rekonstruktion entwickelt. Dazu werden flächig aufgenommene Ultraschallmessdaten mit automatisiert scannenden Druck- und Scherwellenköpfen erzeugt und auf Basis anisotroper Geschwindigkeitsverteilungen rekonstruiert. Benutzt werden die auch häufig für Beton eingesetzten trocken ankoppelnden Punktkontakt-Prüfköpfe. Da damit auch intensive Wellen an der Oberfläche erzeugt werden, entstehen im Material zusätzliche Kopfwellen, die ebenfalls bei der Rekonstruktion berücksichtigt werden. Da die Wellengeschwindigkeiten in Holz individuell stark schwanken, wird eine interaktive Auswertetechnik zur Ermittlung der Materialkonstanten benutzt. Für die Messungen werden Druckwellen sowie Scherwellen in zwei Polarisationsrichtungen verwendet. Die Messungen erfolgen sowohl mit automatischen Scannersystemen als auch mit einem linearen Prüfkopf-Array (kommerziell erhältlicher multistatischer Messkopf). Gezeigt werden Ergebnisse an Bauteilen mit künstlichen und realen Fehlstellen. Das Forschungsprojekt wurde gefördert vom Bundesamt für Bau- und Raumordnung (BBR, Zukunft Bau). T2 - DGZfP-Jahrestagung 2013 CY - Dresden, Germany DA - 06.05.2013 KW - Holz KW - Ultraschallecho KW - Anisotropie KW - Rekonstruktionsrechnung KW - Fehlstellenortung PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-293509 SN - 978-3-940283-49-8 IS - Poster 8 SP - 1 EP - 9 AN - OPUS4-29350 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, Andreas A1 - Rosemann, P. T1 - A user-friendly method to determine the pitting corrosion behavior of cutlery products made of martensitic stainless steels T2 - EUROCORR 2013 T2 - EUROCORR 2013 CY - Estoril, Portugal DA - 2013-09-01 PY - 2013 AN - OPUS4-29047 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, Andreas T1 - Corrosion Education 2.0 T2 - EUROCORR 2013 T2 - EUROCORR 2013 CY - Estoril, Portugal DA - 2013-09-01 PY - 2013 AN - OPUS4-29048 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Everard, C.D. A1 - Finnan, J. A1 - McDonnell, K.P. A1 - Schmidt, Martin T1 - Evaluation of self-heating in Miscanthus x giganteus energy crop clamps and the implications for harvesting time JF - Energy N2 - Miscanthus x giganteus energy crop grown in Ireland was harvested on 21st of February and 28th of March 2012 to examine the effects of harvesting time on self-heating during storage of Miscanthus chips in clamps (98 m³) under weather sheltered conditions. There was a relatively large difference in moisture content, of 21.4%, between Miscanthus crop harvested in February and March (41.6 and 20.2%, respectively). Temperature evolution over a storage period of up to 125 days was monitored at different heights and distances from the centre within the clamps. Maximum temperature in the February constructed clamp reached 69 °C compared to 28 °C in the March constructed clamp. Microbial activity was monitored via carbon dioxide and oxygen gas measurements. The high moisture clamp showed higher microbial activity and a volume yield loss of 4.3% due to decomposition in the top section of the clamp. Quality indices post-storage were also assessed. Calorific values from Miscanthus sampled 1 m below the top surface were similar after storage for both February and March constructed clamps, i.e. 18.52 and 18.70 MJ kg-1, respectively. A reliable assessment of self-heating in Miscanthus chip clamps has important consequences for both self-ignition risk and biomass quality. KW - Self-heating KW - Miscanthus x giganteus KW - Biomass storage KW - Self-ignition KW - Biomass quality PY - 2013 DO - https://doi.org/10.1016/j.energy.2013.06.022 SN - 0360-5442 VL - 58 SP - 350 EP - 356 PB - Elsevier CY - Amsterdam [u.a.] AN - OPUS4-29054 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Martin A1 - Mayer, K. A1 - Chinta, P.K. A1 - Effner, Ute T1 - Ultrasonic imaging of defects in building elements made from timber JF - Advanced materials research N2 - There is a great demand for non-destructive testing methods for quality assurance and to assess the safety and durability of wooden structures. Ultrasonic echo technique with shear waves in the frequency range of 50 kHz is one of those promising methods and is already frequently applied for usual and glued laminated timber. The article describes the development and first results for an imaging method for this purpose. The highly anisotropic properties of the ultrasonic velocity have to be considered. A 3D-SAFT (Synthetic Aperture Focusing Technique) imaging scheme is developed initially for synthetic data resulting from modelling the elastic wave propagation. The main part of the paper describes the experimental validation of this evaluation technique by experimental studies applying automated ultrasonic scanning techniques. 3D ultrasonic imaging results are described for test specimens made from pine and spruce wood. Another object of investigation was a pedestrian bridge made from siberian larch. KW - Ultrasonic echo KW - Imaging KW - SAFT reconstruction calculation KW - Anisotropic wave propagation KW - EFIT modelling KW - Glued-laminated timber (glulam) PY - 2013 DO - https://doi.org/10.4028/www.scientific.net/AMR.778.312 SN - 1022-6680 SN - 1662-8985 VL - 778 SP - 312 EP - 320 PB - Trans Tech Publ. CY - Zurich AN - OPUS4-29088 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Wanke, C. A1 - Krause, U. T1 - Determination of measurement uncertainties in adiabatic hot-storage experiments for reactive dusts JF - Chemical engineering & technology N2 - The formal kinetics of self-ignition of solid bulk materials theoretically can be derived from just one single adiabatic hot-storage test. The question arises how uncertainties in the measurements can be quantified and how these uncertainties affect the results of the subsequent predictions. Adiabatic and isoperibolic hot-storage basket tests were performed for samples of lignite coal, black coal, cork dust, a polymer dust, and wax-coated silicid acid. In the adiabatic experiments, the starting temperature and the temperature control of the oven were varied systematically to study the uncertainty margin of adiabatic tests. The apparent activation energy and the pre-exponential factor of the lumped reaction were derived from the adiabatic tests including average values and standard deviations and compared to isoperibolic experiments performed according to the European standard EN 15188. It could be shown that with a precise temperature control of the adiabatic oven combined with an automated computation of the maximum rate of temperature rise the uncertainty of the apparent activation energy can be limited to less than 10%. KW - Adiabatic test KW - Bulk materials KW - Hot-storage test KW - Reactive dust KW - Self-ignition PY - 2013 DO - https://doi.org/10.1002/ceat.201300068 SN - 0930-7516 SN - 1521-4125 VL - 36 IS - 10 SP - 1 EP - 10 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-29036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Goedecke, Thomas A1 - Martin, Carsten T1 - UHF RFID Three-dimensional performance analyzing system T2 - 18th IAPRI World packaging conference T2 - 18th IAPRI World packaging conference CY - San Luis Obispo, CA, USA DA - 2012-06-17 PY - 2012 SN - 978-1-60595-084-6 SP - 41 EP - 47 PB - DEStech Publications, Inc. CY - Lancaster, Pennsylvania, USA AN - OPUS4-29042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Hao, Ning A1 - Schönhals, Andreas T1 - Correlation of activation energies of gas diffusivity and local matrix mobility in polycarbonate/POSS nanocomposites JF - Journal of polymer science B, polymer physics N2 - According to basic phenomenological models describing the solution-diffusion based mechanism of penetrant diffusion in dense polymers, a connection between the diffusive transport of gas molecules in a polymeric matrix and the molecular mobility of that matrix on a certain length scale is, in principle, established for a long time. However, experimental data directly showing this correlation are rare. The investigation of a series of nanocomposites based on a polyhedral oligomeric silsesquioxane (POSS) and a polycarbonate matrix allows a systematic change of the molecular mobility on a local length scale (β-relaxation) and of the corresponding activation energy EA, both determined by broadband dielectric spectroscopy. Independently, activation energies of penetrant diffusion (ED) of these nanocomposites were determined for N2, O2, CO2, and CH4 and a clear linear correlation between the two activation energies was established for the first time. KW - Broadband dielectric spectroscopy KW - Diffusion KW - Dielectric properties KW - Gas permeation KW - Molecular mobility KW - Nanocomposites KW - Polyhedral oligomeric silsesquioxane (POSS) KW - Relaxation KW - Beta-relaxation PY - 2013 UR - http://onlinelibrary.wiley.com/doi/10.1002/polb.23381/full DO - https://doi.org/10.1002/polb.23381 SN - 0887-6266 SN - 1099-0488 VL - 51 IS - 22 SP - 1593 EP - 1597 PB - Wiley CY - Hoboken, NJ AN - OPUS4-29284 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Eisenacher, Germar A1 - Kuschke, Christian A1 - Schubert, Sven A1 - Neumann, Martin A1 - Sterthaus, Jens A1 - Nitz, Thilo A1 - Wille, Frank T1 - Moisture content of wood: influence on mechanical behaviour of wood filled impact limiters and importance for quality surveillance during manufacturing JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - The moisture content of wood is known to have a significant influence on the wood's mechanical properties. Using wood as an energy absorber in impact limiters of packages for the transport of radioactive material, it is of particular importance to ensure the moisture content and thus relevant mechanical properties to be in specified limits. The paper surveys the influence of wood moisture content on the mechanical properties of wood. Different measuring methods are discussed with respect to in situ applicability, accuracy and effort. The results of an experimental analysis of the accuracy of hand held moisture metres using the electrical resistance method are discussed. Conclusions are drawn regarding the measurement of moisture content of wood upon delivery as well as of complete impact limiter assemblies. Requirements for quality surveillance during manufacturing of wood filled impact limiters are derived and it is exemplified how to meet them. Construction, manufacturing and inspection of impact limiter encapsulation with regard to leak tightness are addressed. KW - Electrical resistance method KW - Impact limiter KW - Moisture content KW - Moisture metre KW - Wood PY - 2012 DO - https://doi.org/10.1179/1746510913Y.0000000023 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 23 IS - 3-4 SP - 179 EP - 185 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-29243 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Effner, Ute A1 - Müller, Sabine A1 - Nowak, Thomas Rudolf A1 - Vergin, Dirk A1 - Mayer, K. A1 - Chinta, P.K. T1 - 3D-SAFT Imaging von Streuern in Brettschichtholz T2 - DGZfP Jahrestagung T2 - DGZfP Jahrestagung CY - Dresden, Germany DA - 2013-05-06 PY - 2013 AN - OPUS4-29292 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Würth, Christian A1 - Resch-Genger, Ute T1 - Tools for the characterization of the signal-relevant properties of upconversion nanoparticles as new class of fluorescent reporters T2 - ANAKON 2013 T2 - ANAKON 2013 CY - Essen, Germany DA - 2013-03-04 PY - 2013 AN - OPUS4-29232 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Wehrstedt, Klaus-Dieter A1 - Bulin, Michael T1 - Bandbreiten sicherheitstechnischer Kenngrößen brennbarer Stäube im Gemeinsamen Stoffdatenpool Bund / Länder (GSBL) T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - Die Beurteilung des Gefahrenpotentials brennbarer Stäube erfolgt üblicherweise mit Hilfe so genannter sicherheitstechnischer Kenngrößen (STK). Häufig werden hierfür in Datenbanken bereitgestellte Werte in der Vergangenheit untersuchter Stäube herangezogen. Insbesondere aufgrund stofflicher Unterschiede der untersuchten Stäube sind erhebliche Streuungen der ermittelten STK in Datenbanken enthaltener namentlich identischer Stäube festzustellen. Die Verwendung der Daten von Einzelstäuben kann daher zu unsicheren Einschätzungen hinsichtlich des Brand- und Explosionsschutzes führen. Vorgestellt wird ein Konzept, Stäube zu praxisrelevanten Gruppen zusammenzufassen und bewertete Bandbreiten sicherheitstechnischer Kenngrößen anzugeben. Die im Rahmen eines vom Sächsischen Landesamt für Umwelt, Landwirtschaft und Geologie, Dresden geförderten Vorhabens generierten Staubgruppen und zugehörigen Bandbreiten der STK stehen in der Datenbank GSBLpublic für die freie Nutzung zur Verfügung. T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2013 KW - Sicherheitstechnische Kenngrößen KW - Stäube KW - Staubexplosionen KW - Datenbank PY - 2013 SN - 978-3-86011-058-4 IS - P-03 SP - 1 EP - 11 AN - OPUS4-29532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Scheid, Marc A1 - Schmidt, Martin A1 - Krause, U. T1 - Wie brand- und explosionsgefährlich sind Nanostäube? T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - Die Nanotechnologie gilt als die Wachstumsbranche der nächsten Jahrzehnte. Nicht zuletzt ist diese Entwicklung der veränderten Eigenschaften der Materialien im Nanometerbereich zuzuschreiben. Das andersgeartete Verhalten solcher Stoffe und die daraus ableitbare Unkenntnis über die Interaktion dieser Materialien mit ihrer Umgebung erfordert eine intensive Auseinandersetzung mit der Thematik zur Risikoabschätzung. Deshalb wurden und werden z.B. die gesundheitlichen Wirkungen von nanoskaligen Materialien auf den menschlichen Organismus bereits in zahlreichen Studien und Forschungsvorhaben untersucht. Fundierte Erfahrungen und Erkenntnisse über Brand- und Explosionsgefahren bei der Herstellung und Handhabung von nanoskalig hergestellten brennbaren Materialien bzw. von Stoffen mit Partikelgrößen < µlpm liegen hingegen bisher kaum vor. Aufgrund von Erfahrungen mit Stäuben mit Partikelgrößen im Mikrometerbereich ist jedoch bekannt, dass Stoffe mit abnehmender Partikelgröße kritischer einzustufen sind, da beispielsweise ihre Explosionsheftigkeit und Zündempfmdlichkeit zunehmen. Die Explosionseigenschaften brennbarer Stäube werden durch sicherheitstechnische Kenngrößen beschrieben. Die Bestimmung sicherheitstechnischer Kenngrößen von Nanostäuben - welche die Grundlage für eine Gefährdungsbeurteilung und das Auslegen von Schutzmaßnahmen für Anlagen bilden - erfolgte bislang nur in geringem Umfang. Diese Untersuchungen wurden zudem großteils in Analogie zu den genormten Verfahren für Mikrostäube durchgeführt. Es wurde dabei jedoch nicht überprüft, ob die für Mikrostäube etablierten Prüfverfahren für eine sichere Bewertung des Brenn- und Explosionsverhaltens geeignet sind. Darüber hinaus kann es durch aus den Prüfapparaturen freigesetzten Staub zu einer Gesundheitsgefährdung der Mitarbeiter kommen. Da bisherige Untersuchungen zum Brand- und Explosionsverhalten von Nanostäuben den Oxidationsgrad der Proben nicht berücksichtigt haben, bestand die Vermutung, dass das Gefahrenpotential von Nanostäuben bislang unterschätzt werden könnte. Deshalb wurde ein modifizierter Prüfaufbau der Prüfapparatur 20-L Kugel entwickelt, um Nanostäube und deren Gefahrenpotential richtig einschätzen und der Kernfrage im Titel dieses Beitrages näher auf den Grund gehen zu können. Insbesondere metallische Nanostäube wurden bei den ersten Tests zur Bestimmung des Brand- und Explosionsverhaltens untersucht. Bei entsprechenden Stäuben ist zu erwarten, dass sich eine mögliche Oberflächenoxidation bzw. Passivierung besonders stark auf das Explosionsverhalten auswirken könnte. Darüber hinaus ist bekannt, dass metallische Stäube pyrophor reagieren oder sich aufgrund der hohen Scherkräfte bereites beim Eindüsen in die Versuchsapparatur entzünden können. Dies kommt gelegentlich bei Metallstäuben mit Medianwerten von wenigen Mikrometern vor. Da bei nanoskaligen Stäuben theoretisch wesentlich größere Oberflächen auftreten, ist davon auszugehen, dass sich dieses Verhalten bei solchen Stäuben verstärken könnte. Dies wurde von Wu et al. in für nanoskalige Eisen und Titanpartikel nachgewiesen. T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2013 PY - 2013 SN - 978-3-86011-058-4 IS - P-17 SP - 1 EP - 10 AN - OPUS4-29533 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zeps, Robert A1 - Askar, Enis A1 - Ferrero, Fabio A1 - Kluge, Martin T1 - Zündtemperatur von Gasen/ Gasgemischen bei erhöhten Anfangsdrücken in Abhängigkeit vom Behältervolumen T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - Zur Einschätzung der Wirksamkeit einer heißen Oberfläche als Zündquelle für ein Gas oder ein Gasgemisch werden in der Praxis Zündtemperaturen experimentell bestimmt. Die Zündtemperatur gemäß dem europäischen Standardverfahren EN 14522 wird bei Atmosphärendruck bestimmt und ist vor allem dazu geeignet die Wirksamkeit einer heißen Oberfläche als Zündquelle bei einem unerwünschten Stoffaustritt aus einer geschlossenen Anlage einzuschätzen. Eine Aussage bzgl. der der Zündfähigkeit an heißen Oberflächen innerhalb einer geschlossenen Anlage, z. B. in größeren Behältern bei bestimmten Gemischzusammensetzungen und höheren Anfangsdrücken, kann anhand der Zündtemperatur gemäß EN 14522 nicht getroffen werden. Die Bestimmung nach dem europäischen Standard erfolgt in einem offenen System, bei atmosphärischem Druck und in Luft als Oxidationsmittel. T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2013 KW - Sicherheitstechnische Kenngrößen KW - Chemisch instabile Gase KW - Zerfallsfähige Gase KW - Explosion KW - Ethylenoxid KW - Tetrafluorethylen KW - Acetylen PY - 2013 SN - 978-3-86011-058-4 IS - F-02 SP - 1 EP - 14 AN - OPUS4-29534 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Klippel, Alexander A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Krause, U. T1 - Staubexplosionsschutz - Einfluss des Staubungsverhaltens auf druckentlastete Staubexplosionen T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2013-11-07 PY - 2013 SN - 978-3-86011-058-4 IS - P-18 SP - 1 AN - OPUS4-29546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Wehrstedt, Klaus-Dieter A1 - Bulin, Michael T1 - Bandbreiten sicherheitstechnischer Kenngrößen brennbarer Stäube im gemeinsamen Stoffdatenpool Bund/Länder (GSBL) T2 - 11. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" T2 - 11. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 2013-11-07 PY - 2013 AN - OPUS4-29497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Rosemann, Paul A1 - Heyn, Andreas T1 - Eine neue Methode zur Untersuchung der Chromverarmung an Karbiden in martensitischen nichtrostenden Stählen T2 - Jahrestagung der Gesellschaft für Korrosionsschutz e.V. 2013 T2 - Jahrestagung der Gesellschaft für Korrosionsschutz e.V. 2013 CY - Frankfurt am Main, Germany DA - 2013-11-12 PY - 2013 AN - OPUS4-29589 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Rosemann, Paul A1 - Müller, Thoralf A1 - Heyn, Andreas T1 - Qualitätsbeurteilung von Schneidwaren durch Kurzzeit-Korrosionsprüfung T2 - Härtereikongress 2013 T2 - Härtereikongress 2013 CY - Wiesbaden, Germany DA - 2013-10-09 PY - 2013 AN - OPUS4-29590 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Effner, Ute A1 - Nowak, Thomas Rudolf A1 - Vergin, Dirk A1 - Mayer, K. A1 - Chinta, P.K. A1 - Ballier, G. T1 - Ultrasonic Imaging of a Footbridge made from Timber T2 - COST Action FP 1101: Assessment, Reinforcement and Monitoring of Timber Structures, Workshop WG3 T2 - COST Action FP 1101: Assessment, Reinforcement and Monitoring of Timber Structures, Workshop WG3 CY - Trento, Italy DA - 2013-09-02 PY - 2013 AN - OPUS4-29639 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bothe, Martin A1 - Pretsch, Thorsten T1 - Bidirectional actuation of a thermoplastic polyurethane elastomer JF - Journal of materials chemistry A N2 - Herein, we report on how to teach a thermoplastic polyurethane elastomer completely stress-free, bidirectional motion. Briefly spoken, we applied training, consisting of extensive tensile deformation in the specimen's viscoelastic state, initiating deformation-induced crystallization. Once unloaded, thermo-reversible specimen expansion and contraction could be detected. Following the microstructural evolution of such a trained specimen by in situ wide-angle X-ray scattering gave evidence for progressive growth of oriented crystallites during cooling. Upon heating, crystallite melting resulted in structural disorder. Beyond this, modification of the training method was used to introduce a geometrically more complex crystalline order. Here, actuation in the form of a decrease and an increase in sample thickness and specimen twisting and untwisting were witnessed. The novel semi-crystalline polymer actuator highlights an enormous potential for realizing versatile reversible shape changes in elastomers. KW - Bidrectional actuation KW - Thermoplastic polyurethane elastomer KW - Shape memory polymer KW - Training KW - Reversible shape changes KW - In situ wide-angle X-ray scattering KW - Hermann's orientation function KW - Mechanical properties KW - Phase change KW - Polymorphism KW - Poly(ester urethane) KW - Poly(1,4-butylene adipate) KW - Semi-crystallinity KW - Stimuli-sensitive polymer KW - Two-way actuator KW - Two-way shape memory KW - Microscopic model PY - 2013 DO - https://doi.org/10.1039/c3ta13414h SN - 2050-7496 SN - 2050-7488 VL - 1 IS - 46 SP - 14491 EP - 14497 PB - RSC CY - London [u.a.] AN - OPUS4-29641 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mayer, K. A1 - Milmann, Boris A1 - Krause, Martin A1 - Mielentz, Frank T1 - Methode zum Nachweis von Verpressfehlern in Spannbeton durch Phasenauswertung bei Ultraschallecho-Verfahren JF - ZfP-Zeitung KW - Ultraschall-Echo-Verfahren KW - Verpressfehler KW - Spannbeton KW - Hüllrohr KW - Brücken PY - 2008 SN - 1616-069X SN - 0948-5112 VL - 112 IS - 12 SP - 37 EP - 40 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-18685 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erhard, Anton A1 - Thomas, Hans-Martin T1 - Prüfung der Plattierung mit Impuls-Wirbelstrom- und Ultraschallverfahren JF - Materialprüfung = Materials testing PY - 1996 SN - 0025-5300 VL - 38 IS - 11-12 SP - 474 EP - 478 PB - Carl Hanser Verlag CY - München AN - OPUS4-18768 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Adamczyk, Burkart A1 - Feldmann, Ines A1 - Bessau, Martin A1 - Brenneis, Rudolf A1 - Kühn, M. A1 - Mudersbach, D. T1 - Rückgewinnung von Chrom aus Edelstahlschlacken im elektrischen Lichtbogenofen JF - Chemie - Ingenieur - Technik N2 - Für die vollständige Rückgewinnung des in Edelstahlschlacken enthaltenen Chroms wird eine reduzierende Schmelzbehandlung im Elektro-Lichtbogenofen vorgeschlagen. Dabei wird das in der Schlacke enthaltene Cr2O3 zum Metall reduziert und in der schmelzflüssigen Phase separiert. Die Effektivität der Reduktion wird entscheidend durch die Fahrweise des Lichtbogenofens bestimmt. Mit optimalen Bedingungen lassen sich mehr als 90 % des enthaltenen Chroms als metallische Legierung zurückgewinnen KW - Edelstahlschlacken KW - Lichtbogenofen KW - Stahlherstellung KW - Chrom KW - Edelstahl KW - Verwertung KW - Recycling KW - Rückgewinnung KW - Schmelzreduktion PY - 2009 DO - https://doi.org/10.1002/cite.200800187 SN - 0009-286X SN - 1522-2640 VL - 81 IS - 4 SP - 479 EP - 488 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-19243 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank T1 - Modelling of compression of wood filled impact limiter of casks for transportation of radioactive material T2 - Radioactive Materials Transport Conference 2009 T2 - Radioactive Materials Transport Conference 2009 CY - Manchester, England DA - 2009-05-12 PY - 2009 AN - OPUS4-19219 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Torge, Manfred A1 - Sabel, Martin A1 - Oidtmann, S. A1 - Maintz, H. ED - Hauptmann, Andreas ED - Heike Stege, T1 - Analytische Untersuchungen zur Provenienzbestimmung von Goldmosaiken im Aachener Dom JF - Metalla T2 - Jahrestagung Archäometrie und Denkmalpflege CY - München, Deutschland DA - 2009-03-25 KW - Goldmosaik KW - Glaszusammensetzung PY - 2009 SN - 0947-6229 SP - 131 EP - 133 PB - Deutsches Bergbau-Museum CY - Bochum AN - OPUS4-19230 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Materialforschung an der BAMline T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin CY - Vienna, Austria DA - 2009-01-28 PY - 2009 AN - OPUS4-19183 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina T1 - Complex Resisitivity (CR) of Wood and Standing Trees T2 - NDTCE 2009 T2 - NDTCE 2009 CY - Nantes, France DA - 2009-06-30 PY - 2009 AN - OPUS4-19649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai A1 - Kluge, Martin A1 - Gebauer, Marek A1 - Grüneberg, Miriam A1 - Müller, Ralf A1 - Eliezer, D. T1 - Pressure resistance of glass capillaries for hydrogen storage T2 - Workshop "Materials challenges for clean enery" im Rahmen des 3rd World Materials Research Institute Forum, NIST T2 - Workshop "Materials challenges for clean enery" im Rahmen des 3rd World Materials Research Institute Forum, NIST CY - Washington, D.C., USA DA - 2009-06-22 PY - 2009 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-19677 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin T1 - Herstellung von Biokeramik mittels rapid prototyping T2 - Kooperationsforum "Generative Fertigungs-technologien" T2 - Kooperationsforum "Generative Fertigungs-technologien" CY - Berlin, Germany DA - 2009-04-29 PY - 2009 AN - OPUS4-19679 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank T1 - Modelling of compression of wood filled impact limiter of casks for transportation of radioactive material T2 - RAMTRANSPORT 09 - 8th International Conference on radioactive materials transport 2009 (Proceedings) N2 - Impact limiters of packages for transport of radioactive materials are in Germany typically steel-wood-sandwich-constructions, combining a relatively stiff steel structure bolted to the cask body, outer steel plates and different types of wood. By crushing the wood-steel-sandwich-structure between unyielding target and cask, kinetic energy of 9-m-free-fall is absorbed. Main energy absorber is wood under a high level of deformation. Wood under large deformations exhibits destruction of the fibre matrix. By analysing compression of impact limiter wood after drop tests with prototype casks for radioactive material, underlying mechanisms of wood crushing and corresponding energy absorption under large deformations are identified. Softening occurring at compression of wood is a function of lateral strain restriction of wood. Against the background of continuum mechanics an analogous model for compression of fibre bundle is presented. The model takes lateral strain restriction as triaxiality of stress state into account. Further modelling possibilities for wood with a continuum approach are described. Different material laws in the explicit Finite Element code LS-DYNA are analysed for possible application on the analogous model for the fibre bundle. Small scale compression tests with wooden specimens were modelled in order to evaluate the ability of different modelling techniques to simulate softening. Although modelling of compression of wood under large deformations is possible, softening could not be simulated purposefully. A drop test of a cask with impact limiting devices similar to existing impact limiters is simulated with different material laws for wood. Behaviour of impact limiting devices could not be simulated universally including influence of lateral strain restriction; nevertheless loading of the cask by crushing of impact limiter could be simulated purposefully. Verification with experimental results is compulsory. T2 - Ramtransport 09 - 8th International Conference on radioactive materials transport 2009 CY - Manchester, Great Britain DA - 2009-05-12 KW - Radioactive material KW - Transport KW - Impact limiter KW - Simulation KW - FEM PY - 2009 IS - PAP31 SP - 1 EP - 20 AN - OPUS4-19751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Martin, Tina ED - Odile Abraham, ED - Dérobert, Xavier T1 - Complex resistivity (CR) of wood and standing trees T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering (Proceedings) N2 - Complex resistivity (CR) has been used to investigate the properties and the extent of damage in wood and standing trees. Our laboratory experiments have proved that wood´s anisotropy influences its electrical behaviour. It is a well-established fact that wood exhibits the lowest resistivity amplitudes in the axial direction compared to that in tangential and radial directions. It has been shown that anisotropy affects not only the amplitude but also the phase. Phase values are the highest in the axial direction, particularly in the lower frequency range. The changes in resistivity due to fungi-induced damage were investigated in a long-term laboratory test. With progressing damage, both resistivity and phase decrease. The phase also shows sensitivity to the changes in the structure of wood cell. CR Tomography (CRT) has been employed in the field to detect fungi-infected zones in fallen trees. A number of factors such as the type and age of the tree, and the season seem to influence the CRT results. Among those, the effect of seasonal changes has been demonstrated here. Furthermore CRT can be used to characterise fungi-infected zones in the tree. T2 - NDTCE `09 - 7th international symposium on non destructive testing in civil engineering CY - Nantes, France DA - 2009-06-30 KW - Tree investigation KW - Complex resistivity tomography KW - Wood anisotropy KW - Fungi KW - Oak PY - 2009 SN - 978-2-7208-2542-5 SN - 1628-4704 IS - Paper 77 SP - 963 EP - 968 AN - OPUS4-19707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nofz, Marianne A1 - Sojref, Regine A1 - Dreßler, Martin A1 - Hünert, Daniela A1 - Dörfel, Ilona A1 - Saliwan Neumann, Romeo T1 - Sol-gel alumina coatings for high-temperature corrosion protection of Ni-base alloy SC16 in water vapour containing atmosphere JF - Interceram N2 - Alumosols in combination with well dispersed corundum were successfully used to form up to 2.5 ìm thick coatings on the Ni-base alloy SC16. These coatings withstood heat treatments at 700 °C in a water vapour containing atmosphere. The heat treatment caused formation of delta-alumina in the coating and diffusion of chromium and titanium into the coating. KW - Alumina KW - Coating KW - Sol-gel KW - Corrosion KW - Protection PY - 2009 SN - 0020-5214 VL - 58 IS - 4 SP - 192 EP - 195 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-19726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bentrup, U. A1 - Radnik, J. A1 - Armbruster, U. A1 - Martin, A. A1 - Leiterer, Jork A1 - Emmerling, Franziska A1 - Brückner, A. T1 - Linking simultaneous in situ WAXS/SAXS/Raman with Raman/ATR/UV-vis spectroscopy: comprehensive insight into the synthesis of molybdate catalyst precursors JF - Topics in catalysis N2 - A new setup is presented which enables simultaneous wide- and small-angle X-ray scattering (WAXS/SAXS) and Raman spectroscopic experiments during the synthesis of Mo-based mixed oxide catalyst precursors at the µ-spot beamline at the Berliner Elektronenspeicherring-Gesellschaft für Synchrotronstrahlung (BESSY). Furthermore, we report about the separate monitoring of the same reactions under comparable conditions by simultaneous combined ATR/UV–vis/Raman spectroscopic measurements. For testing the performance of both experimental setups two syntheses were described comprising the precipitation of metal molybdates by mixing solutions of metal nitrates and ammonium heptamolybdate. Additionally, the effect of H3PO4 admixture on precipitation was investigated. The combined evaluation of spectroscopic and WAXS/SAXS data allows the discrimination between different molybdate species appearing in solution and precipitate. Furthermore, these molybdate species could be assigned to separate phases of different crystallinity. KW - In situ KW - WAXS/SAXS KW - Raman KW - ATR KW - UV-vis KW - Mixed oxide catalyst KW - Synthesis PY - 2009 DO - https://doi.org/10.1007/s11244-009-9309-y SN - 1022-5528 VL - 52 IS - 10 SP - 1350 EP - 1359 PB - Springer Science + Business Media CY - Dordrecht AN - OPUS4-19794 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin T1 - Generative Fertigungstechniken für die Biokeramik T2 - Tagung des AK Keramikbearbeitung am Institut für Werkzeugmaschinen und Fabrikbetrieb, Fachgebiet Werkzeugmaschinen und Fertigungstechnik der TU Berlin T2 - Tagung des AK Keramikbearbeitung am Institut für Werkzeugmaschinen und Fabrikbetrieb, Fachgebiet Werkzeugmaschinen und Fertigungstechnik der TU Berlin CY - Berlin, Germany DA - 2009-10-01 PY - 2009 AN - OPUS4-20203 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin T1 - Erfahrungen und Vorgehensweise bei chemisch/ physikalischen Materialprüfungen T2 - Veranstaltungsreihe "Risikobasierte biologische Beurteilung und Sicherheitsprüfungen von Medizinprodukten" T2 - Veranstaltungsreihe "Risikobasierte biologische Beurteilung und Sicherheitsprüfungen von Medizinprodukten" CY - Potsdam, Germany DA - 2009-10-15 PY - 2009 AN - OPUS4-20204 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin T1 - Resorbable ceramics scaffolds with bone-like morphology T2 - Rapid Prototyping in Regenerative Medicine at the 4th Fraunhofer Life Science Symposium T2 - Rapid Prototyping in Regenerative Medicine at the 4th Fraunhofer Life Science Symposium CY - Leipzig, Germany DA - 2009-10-29 PY - 2009 AN - OPUS4-20205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosner, Martin T1 - Geochemical and instrumental fundamentals for accurate and precise strontium isotope data of food samples: comment on "determination of the strontium isotope ration by ICP-MS ginseng as a tracer of regional origin" (Choi et al., 2008) JF - Food chemistry N2 - The strontium isotope composition of food samples has been successfully used to trace the provenance of both herbal and animal agricultural products. Adequately accurate and precise 87Sr/86Sr ratios, however, are key to unravel environmental and anthropogenic strontium contributions of specific growing areas. In a recently published analytical method in Food Chemistry by Choi et al. (2008) a demonstrably inadequate protocol for the determination of 87Sr/86Sr ratios of ginseng is presented. Based on well established geological and analytical fundamentals the 87Sr/86Sr ratios presented by Choi et al. (2008) are too inaccurate and imprecise to be used to trace the origin of the ginseng. Appropriate wet chemical separation techniques and mass spectrometric instrumentation enables the generation of 87Sr/86Sr data with very low expanded uncertainties (<0.05%, k = 2). Those high quality data allow the identification of even small strontium contributions of source reservoirs or physical and anthropogenic processes if diagnostic isotope compositions are present. KW - Strontium isotopes KW - Food provenance studies KW - TIMS KW - ICP-MS KW - Analytical accuracy KW - Mass spectrometry PY - 2010 DO - https://doi.org/10.1016/j.foodchem.2010.01.019 SN - 0308-8146 VL - 121 IS - 3 SP - 918 EP - 921 PB - Elsevier CY - Amsterdam [u.a.] ; Jena AN - OPUS4-21325 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - Modeling the heat transfer in acetylene cylinders during and after the exposure to fire JF - Journal of loss prevention in the process industries N2 - In this paper two different approaches for predicting the heating-up of an acetylene cylinder involved in a fire and the afterward cooling with water are presented. In the simulations polynomial functions were used to describe the temperature dependency of the thermal properties of the cylinder interior, which is a complex system composed by a solid porous material, a solvent (typically acetone) and acetylene dissolved in it. Model equations covered heat conduction in the cylinder interior and at its walls. In the first approach the cylinder surroundings were simulated as a further domain constituted by CO2, during the fire exposure, and for water, during the cooling. In this domain the coupled heat transfer (convection and conduction) and the momentum equation (Navier-Stokes) were solved. In the second approach no further domain was considered but boundary conditions were set directly on the cylinder walls. Results of the calculations performed with both approaches are presented. This work could prove helpful in predicting to which extent the interior of an acetylene cylinder exposed to fire reaches temperatures capable of initiating the decomposition of acetylene and to determine how long a water cooling should be applied, so that the system is brought again under non-critical conditions. KW - Safety KW - Acetylene KW - Heat transfer KW - Fire KW - Water cooling PY - 2010 DO - https://doi.org/10.1016/j.jlp.2010.06.012 SN - 0950-4230 SN - 1873-3352 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 23 SP - 654 EP - 661 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-21808 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hao, N. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - CO2 gas transport properties of nanocomposites based on polyhedral oligomeric phenethyl-silsesquioxanes and poly(bisphenol A carbonate) JF - Macromolecules N2 - Polymer-based nanocomposites were prepared by solution blending of polyhedral oligomeric silsesquioxane with phenethyl substituents (PhenethylPOSS) into poly(bisphenol A carbonate) (PBAC). First investigations focused on structure, morphology and dynamics, addressed mainly by dielectric relaxation spectroscopy are substantially extended in this study by the investigation of the CO2 gas transport behavior of these materials, i.e., permeation experiments using the time-lag technique as well as gravimetric gas sorption measurements. The nanocomposite materials were prepared with nanofiller contents ranging from 0 to about 40 wt % by solution blending and films of about 50-100 µm thickness were cast from this solution and used for the investigation of gas transport properties after drying and annealing. From the time-lag measurements the permeability and an effective diffusion coefficient for CO2 is obtained in dependence of POSS concentration and temperature. As main results, both, the permeability and the diffusivity, increase whereas the solubility decreases with increasing POSS concentration. These findings are discussed in the framework of a microphase separated morphology of the nanocomposite systems for POSS concentrations greater than a value cPOSScrit of ca. 7 wt % consisting of a polycarbonate-rich matrix and POSS-rich domains which are surrounded by an interfacial layer. The experimental solubility data suggest that the POSS-rich domains are more or less impermeable for CO2. On the basis of this assumption a quantitative model is provided to correct the solubility data for the phase separated morphology. Moreover the importance of the interfacial layer between the POSS particles or its domains for the properties of nanocomposites especially for the gas transport behavior is addressed by analyzing the sorption isotherms. Also, for the first time results from gas transport measurements and dielectric spectroscopy were quantitatively related to each other by taking the activation energies of CO2 diffusion and of the dielectric β-relaxation into consideration. The obtained clear correlation indicates that the CO2 gas transport is due to localized molecular fluctuations. As a further result, the diffusion coefficient obtained from time-lag and gas sorption measurements is in good agreement with respect to both their absolute values and in their concentration dependence. PY - 2010 DO - https://doi.org/10.1021/ma101463m SN - 0024-9297 SN - 1520-5835 VL - 43 IS - 22 SP - 9417 EP - 9425 PB - American Chemical Society CY - Washington, DC AN - OPUS4-22378 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Hensel, Christina A1 - Kreißig, Michael A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - Unterfeuerung von Acetylendruckgasbehältern T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Sicherheit KW - Acetylen KW - Feuer KW - Wasserkühlung KW - Wärmeübertragung PY - 2010 SN - 978-3-89746-119-2 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. IS - Paper N-02 SP - 1 EP - 20 CY - Frankfurt/M. AN - OPUS4-22351 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hodoroaba, Vasile-Dan A1 - Radtke, Martin A1 - Vincze, L. A1 - Rackwitz, Vanessa A1 - Reuter, Dirk T1 - X-ray scattering in X-ray fluorescence spectra with X-ray tube excitation - Modelling, experiment, and Monte-Carlo simulation JF - Nuclear instruments and methods in physics research B N2 - X-ray scattering may contribute significantly to the spectral background of X-ray fluorescence (XRF) spectra. Based on metrological measurements carried out with a scanning electron microscope (SEM) having attached a well characterised X-ray source (polychromatic X-ray tube) and a calibrated energy dispersive X-ray spectrometer (EDS) the accuracy of a physical model for X-ray scattering is systematically evaluated for representative samples. The knowledge of the X-ray spectrometer efficiency, but also of the spectrometer response functions makes it possible to define a physical spectral background of XRF spectra. Background subtraction relying on purely mathematical procedures is state-of-the-art. The results produced by the analytical model are at least as reliable as those obtained by Monte-Carlo simulations, even without considering the very challenging contribution of multiple scattering. Special attention has been paid to Compton broadening. Relevant applications of the implementation of the analytical model presented in this paper are the prediction of the limits of detection for particular cases or the determination of the transmission of X-ray polycapillary lenses. KW - X-ray scattering KW - X-ray fluorescence KW - Spectral background KW - Modelling KW - Monte-Carlo simulation PY - 2010 DO - https://doi.org/10.1016/j.nimb.2010.09.017 SN - 0168-583X SN - 1872-9584 VL - 268 IS - 24 SP - 3568 EP - 3575 PB - Elsevier CY - Amsterdam AN - OPUS4-22357 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Ferrero, Fabio T1 - Brandgefahr: Selbstentzündung von Biomassehalden T2 - 1. C.A.R.M.E.N. Forschungs-Kolloquium "Nachwachsende Rohstoffe" T2 - 1. C.A.R.M.E.N. Forschungs-Kolloquium "Nachwachsende Rohstoffe" CY - Straubing, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22367 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bothe, Martin A1 - Khine, Y. A1 - Chaobin, H. A1 - Pretsch, Thorsten T1 - SPOSS-PU Triple-shape Properties and Actuation T2 - Synthesis and Integration Group Seminar, Institute of Materials Research and Engineering (IMRE) T2 - Synthesis and Integration Group Seminar, Institute of Materials Research and Engineering (IMRE) CY - Singapore DA - 2011-04-27 PY - 2011 AN - OPUS4-23562 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter A1 - Scheid, Marc A1 - Böhme, Thilo T1 - Projektstatusbericht 03/2011: GSBL Datenbank "Bandbreiten von Stäuben" und Interlaboratory test 2011/11 "EN 15188:2007 - Self-ignition temperature" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2011-03-31 PY - 2011 AN - OPUS4-23574 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Wiedenbeck, M. A1 - Ludwig, T. T1 - Determination of true boron isotope compositions of silicate glasses by SIMS: NIST SRM glasses and composition-induced variations in SIMS instrumental mass fractionation T2 - Jahrestagung Deutsche Mineralogische Gesellschaft 2008 T2 - Jahrestagung Deutsche Mineralogische Gesellschaft 2008 CY - Berlin, Deutschland DA - 2008-09-14 KW - SIMS KW - Boron isotopes KW - Instrumental mass bias PY - 2008 SP - 1 CY - Berlin AN - OPUS4-20786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Eilbracht, H. A1 - Armbruster, B. A1 - Reichen, I. T1 - Das Hiddensee-Projekt T2 - Kulturgut durchleutet - Strahlung trifft Kulturgut (Symposium) T2 - Kulturgut durchleutet - Strahlung trifft Kulturgut (Symposium) CY - Berlin, Germany DA - 2009-11-04 PY - 2009 AN - OPUS4-20771 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Von der Bronzezeit ins 21. Jahrhundert - Materialcharakterisierung mit SyXRF an der BAMline T2 - 17. Sitzung des Fachausschusses Zerstörungsfreie Materialcharakterisierung, DGZFP T2 - 17. Sitzung des Fachausschusses Zerstörungsfreie Materialcharakterisierung, DGZFP CY - Berlin, Germany DA - 2009-11-10 PY - 2009 AN - OPUS4-20772 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Peucker-Ehrenbrink, B. A1 - Bach, W. T1 - Osmium isotope and PGE variations in oceanic core complexes: Atlantis Massif, a typical crustal section formed at a MAR T2 - Jahrestagung Deutsche Mineralogische Gesellschaft 2008 T2 - Jahrestagung Deutsche Mineralogische Gesellschaft 2008 CY - Berlin, Deutschland DA - 2008-09-14 KW - Oceanic core complexes KW - Atlantis Massif KW - Osmium isotopes PY - 2008 SP - 1 CY - Berlin AN - OPUS4-20784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heckel, Thomas A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc A1 - Rühe, S. T1 - High speed non-destructive rail testing with advanced ultrasound and eddy-current testing techniques T2 - NDE 2009 (Proceedings) N2 - Today the rails face increased exposure to heavy loads, higher speeds and a very dense overall traffic. A continued development of testing methods for the rail inspection trains became necessary to match the modern needs for a fast detection and detailed classification of defects. To guarantee the safe operation of rail traffic non-destructive inspection techniques with combined ultrasound and eddy current testing methods are used to detect damages on rails. One of the main actual challenges of automated rail testing is the high inspection speed which is very close to the physical limits. To overcome these limits digital signal processing algorithms have to be used which maintain resolution and detection quality independent of operation speed. This paper presents a recently developed state of the art rail inspection system which uses advanced ultrasonic and eddy current testing techniques. Testing results are shown in a newly developed so called Glassy-Rail-Diagram which is capable to present data with a fixed resolution independent of inspection speed. T2 - NDE 2009 CY - Tiruchirappalli, India DA - 2009-12-10 KW - Non-destructive testing (NDT) KW - Rail inspection KW - Ultrasound KW - Eddy current KW - Signal processing PY - 2009 SP - 261 EP - 265 AN - OPUS4-20883 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Qiao, Linan A1 - Neumann, Martin A1 - Komann, Steffen A1 - Ballheimer, Viktor T1 - Dynamic and quasi-static FE calculation of impact from 9 metre drop of spent fuel transport cask JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - The drop from 9 m height onto a rigid target is one of the required proofs of safety for packages of radioactive materials. Direct dynamic finite element method (FEM) calculations and combined two step analytical quasi-static finite element (FE) calculations are both applied for the simulation of a 9 m drop test. This paper gives a comparative example of both approaches for the 9 m side drop simulation of the spent fuel transport cask with wood filled impact limiter. The model for dynamic FEM consists of cask body and impact limiter. Detailed material properties and geometry descriptions from each component of the impact limiter are required. The results (stress fields in the cask body) are obtained directly from the calculation. The combined method provides as intermediate results the force-deformation characteristic of impact limiter. The maximum impact limiter force determined by the law of energy conservation during the drop is then - in a second step - applied on the cask body in a quasi-static FE model in order to calculate the stresses. In this paper, the rigid body deceleration and the maximum stress in the middle of the cask body are used for the comparison between the dynamic FEM and the combined method. Similar maximum rigid body deceleration-time curves were obtained by both methods for the horizontal 9 m free fall. Concerning the stress in the cask body the dynamic FEM results oscillate about values calculated by the combined quasi-static approach. If the combined quasi-static approach is used in the safety assessment of a cask, a suitable factor has to be applied on its results to take into account the additional dynamic effects. KW - Drop test KW - Spent fuel transport cask KW - Finite element calculation KW - Dynamic simulation KW - Impact limiter KW - Wood PY - 2009 DO - https://doi.org/10.1179/174650909X12553336148026 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 20 IS - 4 SP - 174 EP - 178 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-20819 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Qiao, Linan A1 - Ballheimer, Viktor A1 - Komann, Steffen T1 - Simulation of Impact Limiter Crushing of RAM Packages under 9 m Drop Test Conditions T2 - Waste Management 2010 T2 - Waste Management 2010 CY - Phoenix, AZ, USA DA - 2010-03-06 PY - 2010 AN - OPUS4-20804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Suhendra, Suhendra A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Underground coal fire extinction model using coupled reactive heat and mass transfer model in porous media T2 - COMSOL Conference 2009 (Proceedings) T2 - COMSOL Conference 2009 CY - Milan, Italy DA - 2009-10-14 KW - Reactive heat - mass transfer KW - Underground coal fire KW - Porous media PY - 2009 SN - 978-0-9825697-0-2 SP - 1 EP - 6 AN - OPUS4-20833 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Simons, C. A1 - Mans, C. A1 - Hanning, S. A1 - Janßen, A. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Ostermann, Markus A1 - Michaelis, Matthias A1 - Wienold, Julia A1 - Alber, D. A1 - Kreyenschmidt, M. T1 - Study on microscopic homogeneity of polymeric candidate reference materials BAM H001-BAM H010 by means of synchrotron µ-XRF and LA-ICP-MS JF - Journal of analytical atomic spectrometry N2 - In this study the microscopic homogeneity of the newly developed plastic reference materials BAM H001-BAM H010 was investigated. The materials consist of an acrylonitryle-butadien-styrene terpolymer, doped with different amounts of the elements Br, Cd, Cr, Hg and Pb. For the quantitative determination of the degree of homogeneity, a procedure proposed by Kempenaers et al. (Fresenius J. Anal. Chem., 2001, 369, 733-737) was used. On every sample an extensive number of different points were analyzed and standard deviation for every element mentioned above was used to calculate a minimal sampling mass that is necessary to reach a certain level of uncertainty caused by inhomogeneity (mmin,5%). The experiments were taken out with synchrotron µ-XRF (SR µ-XRF) at BESSYII in Berlin and by laser ablation inductively coupled plasma mass spectroscopy (LA-ICP-MS). The calculated values for mmin,5% of both techniques showed comparable results for all elements. It could be shown that the materials are suitable for calibration of micro analytic techniques if at least 64 µg are used. KW - XRF KW - LA-ICP-MS KW - RoHS KW - CRM PY - 2010 DO - https://doi.org/10.1039/b917008a SN - 0267-9477 SN - 1364-5544 VL - 25 SP - 40 EP - 43 PB - Royal Society of Chemistry CY - London AN - OPUS4-20938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Friese, Martin A1 - Taffe, Alexander A1 - Wöstmann, Jens A1 - Zoëga, Andreas T1 - Zerstörungsfreie Untersuchungen am Brückenbauwerk A1 Hagen/Schwerte T2 - Berichte der Bundesanstalt für Straßenwesen - Brücken- und Ingenieurbau KW - Ultraschallecho KW - Impakt-Echo KW - Radar KW - Zerstörungsfreie Prüfung KW - Brücke KW - Hagen KW - Scannende Systeme KW - Spannglied KW - Bildgebende Darstellung PY - 2009 SN - 0943-9307 IS - B 65 SP - 1 EP - 52 PB - Wirtschaftsverlag NW - Verlag für neue Wissenschaft GmbH CY - Bremerhaven AN - OPUS4-20958 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Maack, Stefan A1 - Krause, Martin T1 - Ultraschall-Echoverfahren zur Integritätsprüfung von Holzbauteilen beim Bauen im Bestand PY - 2009 SN - 978-3-8167-8156-1 IS - F 2537 SP - 1 EP - 86 PB - Fraunhofer IRB Verl. CY - Stuttgart AN - OPUS4-20983 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina A1 - Trela, Christiane A1 - Kind, Thomas A1 - Gil, Magdalena A1 - Wöstmann, Jens T1 - Untersuchungen zur Detektion von Granitgrenzsteinen mit Georadar T2 - 70. Jahrestagung der Deutschen Geophysikalischen Gesellschaft DGG T2 - 70. Jahrestagung der Deutschen Geophysikalischen Gesellschaft DGG CY - Bochum, Germany DA - 2010-03-15 PY - 2010 AN - OPUS4-21062 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Robertson, Daniela A1 - Schröder, Hartmut A1 - Brummermann, K. A1 - Kaundinya, I. A1 - Saathoff, F. T1 - Möglichkeiten der Abschätzung der Langzeitbeständigkeit von Kunststoffdichtungsbahnen (KDB) auf Polyolefinbasis für den Tunnelbau T2 - Fachtagung der Kompetenzplattformen "Life Cycle Assessment (LCA)" neuer Kunststoffe der FH Münster und "Polymere Materialien" der FH Aachen T2 - Fachtagung der Kompetenzplattformen "Life Cycle Assessment (LCA)" neuer Kunststoffe der FH Münster und "Polymere Materialien" der FH Aachen CY - Münster, Germany DA - 2010-02-25 PY - 2010 AN - OPUS4-21019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Vasilescu, A. A1 - Constantinescu, B. A1 - Bugoi, R. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Simon, R. ED - Denecke, M. ED - Walker, C. T1 - Gold provenance studies for Romanian archaeological objects using micro-SR-XRF T2 - 20th International congress on X-ray optics and microanalysis (Proceedings) N2 - Studies by Synchrotron Radiation-X-Ray Fluorescence (SR-XRF) for the search of the presence of trace elements like Sb, Sn, Te and Pb in archaeological metallic objects found on the territory of Romania-old coins and Bronze Age jewelry, aimed to determine the provenance of the gold used in their manufacture. The results are compared with the detailed elemental composition of alluvial or primary gold samples, obtained by the same technique. This work attempted to establish the origin of the gold used for the mint of two different types of koson coins. We found that the kosons with monogram are made of refined gold, while the one used for the kosons without monogram is mainly alluvial. The gold used in the manufacture of the Calarasi Vulchitrun-type disk and the Tauteu hair ring is also of alluvial origin. T2 - 20th International congress on X-ray optics and microanalysis CY - Karlsruhe, Germany DA - 2009-09-14 KW - Provenance KW - Gold KW - SR-XRF KW - Trace elements PY - 2010 UR - http://link.aip.org/link/?APCPCS/1221/139/1 SN - 978-0-7354-0764-0 DO - https://doi.org/10.1063/1.3399240 SN - 0094-243X SP - 139 EP - 143 PB - American Institute of Physics AN - OPUS4-21182 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Weber, Mike A1 - Qiao, Linan A1 - Droste, Bernhard T1 - Static and dynamic calculation approaches for mechanical design assessment of type B packages for radioactive material transport - 10193 T2 - WM2010 Conference (Proceedings) T2 - WM2010 Conference CY - Phoenix, Arizona, USA DA - 2010-03-07 KW - Mechanische Bewertung KW - Radioaktives Material KW - Numerische Analyse KW - Typ B(U)-Verpackung PY - 2010 SP - 1 EP - 9 AN - OPUS4-21240 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Characterization of precious metal objects with SRXRF at the Bamline T2 - Synchrotron Radiation in Art & Archaeology (SR2A-2010) T2 - Synchrotron Radiation in Art & Archaeology (SR2A-2010) CY - Amsterdam, Netherlands DA - 2010-11-07 PY - 2010 AN - OPUS4-21244 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Munnik, F. A1 - Lehmann, B. A1 - Cabral, A. R. T1 - Spatially-resolved detection of iodine in natural platinum-palladium nuggets: a comparison of PIXE and XRF T2 - European Conference on X-ray Spectrometry T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21201 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Scharf, Oliver A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Riesemeier, Heinrich A1 - Langhoff, N. A1 - Gubzhokov, R. A1 - Bjeoumikova, S. A1 - Wedell, R. A1 - Ihle, S. A1 - Soltau, H. T1 - X-ray camera with high energy and spital resolution: Sterography with a colour X-ray camera T2 - European Conference on X-ray Spectrometry T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21205 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brücher, M. A1 - von Bohlen, A. A1 - Jacob, P. A1 - Franzke, J. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Müller, Bernd R. A1 - Scharf, Oliver A1 - Hergenröder, R. T1 - The charge of solid-liquid interfaces measured by X-ray standing waves and streaming current JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - Measurements of ion distributions at a charged solid–liquid interface using X-ray standing waves (XSW) are presented. High energy synchrotron radiation (17.48 keV) is used to produce an XSW pattern inside a thin water film on a silicon wafer. The liquid phase is an aqueous solution containing Br and Rb ions. The surface charge is adjusted by titration. Measurements are performed over a pH range from 2.2–9, using the native Si oxide layer and functional (amine) groups as surface charge. The Debye length, indicating the extension of the diffuse layer, could be measured with values varying between 1–4 nm. For functionalized wafers, the pH dependent change from attraction to repulsion of an ion species could be detected, indicating the isoelectric point. In combination with the measurement of the streaming current, the surface charge of the sample could be quantified. KW - Interfacial charge KW - Solid/liquid interfaces KW - Surface analysis KW - Surface functionalization KW - X-ray spectrometry KW - X-ray KW - Standing waves KW - XSW KW - Streaming current KW - Synchrotron radiation PY - 2010 DO - https://doi.org/10.1002/cphc.201000166 SN - 1439-4235 SN - 1439-7641 VL - 11 IS - 10 SP - 2118 EP - 2123 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-22057 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Robertson, Daniela A1 - Schröder, Hartmut T1 - Oxidationsbeständigkeit von Geokunststoffen T2 - 10. Schwarzheider Kunststoffkolloquium T2 - 10. Schwarzheider Kunststoffkolloquium CY - Schwarzheide, Germany DA - 2010-09-08 PY - 2010 AN - OPUS4-22103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hölck, O. A1 - Heuchel, M. A1 - Hofmann, D. T1 - Charakterization of gas sorption in glassy polymers using experimental and molecular modeling techniques T2 - 14th International Conference "Polymeric Materials" T2 - 14th International Conference "Polymeric Materials" CY - Halle (Saale), Germany DA - 2010-09-15 PY - 2010 AN - OPUS4-22104 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Böhme, Thilo T1 - Statusbericht GSBL Datenbank Bandbreiten der Brenn- und Explosionskenngrößen von Stäuben T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22300 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schoßig, Jörg A1 - Schmidt, Martin T1 - Forschungsvorhaben "Adiabate Warmlagerung" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter A1 - Malow, Marcus A1 - Schoßig, Jörg T1 - Isoperibole Warmlagerung Einfluss der Streuung experimentell ermittelter Selbstentzündungstemperaturen auf die Übertragung in den technischen Maßstab T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2010-11-04 PY - 2010 AN - OPUS4-22302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Interlaboratory test 2010/11 "EN 15188:2007 - Self-ignition temperature" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, Ulrich T1 - Ergebnisse des Forschungsvorhabens "Adiabate Warmlagerung" T2 - Arbeitsausschuss "Brennbare Stäube" T2 - Arbeitsausschuss "Brennbare Stäube" CY - Freiberg, Germany DA - 2010-06-23 PY - 2010 AN - OPUS4-22304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schickert, M. A1 - Krause, Martin ED - Maierhofer, C. ED - Reinhardt, H.-W. ED - Dobmann, G. T1 - Ultrasonic techniques for evaluation of reinforced concrete structures T2 - Non-destructive evaluation of reinforced concrete structures - Volume 2: Non-destructive testing methods KW - Ultrasonics KW - Elastic wave propagation KW - Flaw detection KW - SAFT reconstruction KW - Post-tensioned concrete structures PY - 2010 SN - 978-1-84569-950-5 VL - 2 IS - Chapter 22 SP - 490 EP - 530 PB - Woodhead Publ. AN - OPUS4-22546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friese, Martin A1 - Helmerich, Rosemarie A1 - Effner, Ute A1 - Mielentz, Frank ED - Frangopol, D. ED - Sause, R. ED - Kusko, C. T1 - Capabilities of non-destructive testing of RC structures - quality assurance for crack repair using ultrasonic echo T2 - IABMAS 2010 - Bridge maintenance, safety, management and life-cycle optimization (Proceedings) T2 - IABMAS 2010 - Bridge maintenance, safety, management and life-cycle optimization CY - Philadelphia, PA, USA DA - 2010-07-11 KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Risse KW - Erfolgskontrolle Rissinjektion PY - 2010 SN - 978-0-415-87786-2 SP - 1524 EP - 1531 PB - CRC Press AN - OPUS4-22548 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friese, Martin A1 - Roder, C. A1 - Effner, Ute A1 - Mielentz, Frank T1 - Quality control for crack repair - a new approach using ultrasonic imaging T2 - NDE/NDT for highways and bridges - Structural materials technology (Proceedings) T2 - NDE/NDT for highways and bridges - Structural materials technology CY - New York, NY, USA DA - 2010-08-16 KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Risse KW - Erfolgskontrolle Rissinjektion PY - 2010 SN - 978-1-57117-211-2 SP - 374 EP - 382 AN - OPUS4-22549 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Friese, Martin A1 - Effner, Ute A1 - Nowak, Thomas Rudolf A1 - Mielentz, Frank T1 - Erfolgskontrolle von Rissinjektionen durch Ultraschallmessungen T2 - Fachtagung Bauwerksdiagnose 2010 - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen zerstörungsfreier Prüfungen und Zukunftsaufgaben CY - Berlin, Deutschland DA - 2010-02-18 KW - Zerstörungsfreie Prüfung KW - Ultraschall KW - Risse KW - Erfolgskontrolle Rissinjektion PY - 2010 SN - 978-3-940283-24-5 IS - DGZfP-BB 121 (Poster 05) SP - 1 EP - 10 CY - Berlin AN - OPUS4-22550 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Malow, Marcus A1 - Ferrero, Fabio T1 - Vermeidung der Brandentstehung bei der Lagerung von Biomasse T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Nuremberg, Germany DA - 2010-11-16 PY - 2010 AN - OPUS4-22557 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friese, Martin A1 - Helmerich, Rosemarie A1 - Effner, Ute A1 - Mielentz, Frank T1 - Capabilities of non-destructive testing of RC structures - quality assurance for crack repair using ultrasonic echo T2 - IABMAS2010, Bridge Maintenance, Safety, Management and Life-Cycle Optimization T2 - IABMAS2010, Bridge Maintenance, Safety, Management and Life-Cycle Optimization CY - Philadelphia, PA, USA DA - 2010-07-11 PY - 2010 AN - OPUS4-22558 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friese, Martin A1 - Roder, C. A1 - Effner, Ute A1 - Mielentz, Frank T1 - Quality Control for Crack Repair - A New Approach Using Ultrasonic Imaging T2 - NDE/NDT for Highway & Bridges: SMT 2010 T2 - NDE/NDT for Highway & Bridges: SMT 2010 CY - New York City, NY, USA DA - 2010-08-16 PY - 2010 AN - OPUS4-22559 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Friese, Martin A1 - Effner, Ute A1 - Nowak, Thomas Rudolf A1 - Mielentz, Frank T1 - Erfolgskontrolle von Rissinjektionen durch Ultraschallmessungen T2 - Fachtagung Bauwerksdiagnose T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-22560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Vogl, Jochen T1 - Three new offset delta-11-B isotope reference materials T2 - 22. ICP-MS Anwendertreffen T2 - 22. ICP-MS Anwendertreffen CY - Berlin, Germany DA - 2010-09-06 PY - 2010 AN - OPUS4-22565 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Scheid, Marc A1 - Schmidt, Martin A1 - Lohrer, Christian T1 - Sichere Handhabung brennbarer Stäube - Übersichtsvortrag - Explosionsschutz bei Stäuben T2 - Seminar "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" der DECHEMA T2 - Seminar "Grundlagen und rechtliche Anforderungen des Explosionsschutzes" der DECHEMA CY - Frankfurt am Main, Germany DA - 2010-11-02 PY - 2010 AN - OPUS4-22579 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dreßler, Martin A1 - Dombrowski, Felix A1 - Simon, Ulla A1 - Börnstein, Julian A1 - Hodoroaba, Vasile-Dan A1 - Feigl, Michael A1 - Grunow, Sabrina A1 - Gildenhaar, Renate T1 - Toughening of porous ceramics T2 - CellMat 2010 T2 - CellMat 2010 CY - Dresden, Germany DA - 2010-10-27 PY - 2010 AN - OPUS4-22523 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Friese, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Mayer, K. A1 - Ballier, G. T1 - Darstellung des Verpresszustandes von Spannkanälen mit 3D-Ultraschallechoverfahren: Modellierung und Experiment T2 - DGZfP-Jahrestagung T2 - DGZfP-Jahrestagung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-22847 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin T1 - Zerstörungsfreie Prüfung von Betonbauteilen mit bildgebenden Ultraschallecho-Verfahren T2 - DGZfP-Arbeitskreis Dresden T2 - DGZfP-Arbeitskreis Dresden CY - Dresden, Germany DA - 2010-06-22 PY - 2010 AN - OPUS4-22850 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Raedel, Martina A1 - Sabel, Martin A1 - Bücker, Michael A1 - Reimann, M. A1 - Haber, G. A1 - Baldauf, T. T1 - Korrosionsschutz für farbig gefasste Eisen- und Gusseisenobjekte T2 - Farbig gefasstes Metall, Herstellung - Schäden - Restaurierung T2 - Farbig gefasstes Metall, Herstellung - Schäden - Restaurierung CY - Kassel, Germany DA - 2010-09-30 PY - 2010 AN - OPUS4-22791 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Milmann, Boris A1 - Feldmann, Rüdiger A1 - Friese, Martin A1 - Wöstmann, Jens A1 - Zoëga, Andreas A1 - Sodeikat, Ch. T1 - Thickness Measurement and Quality Assurance of Floor Slabs and Diaphragm Walls T2 - Structural Faults & Repair 2010, 13th International Conference and Exhibition, The University of Edinburgh T2 - Structural Faults & Repair 2010, 13th International Conference and Exhibition, The University of Edinburgh CY - Edinburgh, Scotland DA - 2010-06-15 PY - 2010 AN - OPUS4-22861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Synchrotron radiation induced X-ray fluorescence for the characterization of ancient gold objects JF - ArcheoSciences KW - Gold KW - Hiddensee treasure KW - Nebra sky disc KW - Non-destructive testing KW - Silver point drawings KW - Synchrotron KW - X-ray fluorescence KW - Or KW - Trésor d´Hiddensee KW - Disque déleste de Nebra KW - Analyse non-destructive KW - Dessins à pointe d´argent KW - Synchrotron KW - Fluorescence à rayons X PY - 2009 SN - 0399-1237 VL - 33 SP - 39 EP - 44 PB - Groupe CY - Rennes AN - OPUS4-23219 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Radtke, Martin A1 - Reinholz, Uwe T1 - A study on gold and copper provenance for Romanian prehistoric objects using micro-SR XRF JF - Journal of analytical atomic spectrometry N2 - This study intends to clarify the metal provenance of gold archaeological items using the variation of the Au–Ag ratio and the presence of trace elements as Sn, Sb, Te, and Pb, concentrating on gold Dacian Koson coins, recovered recently. It also extends the area of our investigations to the copper provenance of Bronze Age artifacts—axes, sickles, and celts—found on Romanian territory. The experiments were performed by micro-SR XRF at BESSY Berlin, at the BAM-line facility. Two types of coins (Koson, with and without monogram) were analysed. The conclusions we reached were that most of the monogram coins are made from refined gold (3–5% Ag, less than 0.5% Cu), while the without monogram coins are made from native Transylvanian gold (9–20% Ag, 0.5–2% Cu), of alluvial origin, proved by the presence of Sn, Sb and Te embedded in the gold. The problem of provenance for prehistoric Romanian copper and bronze objects consists in linking their elemental compositional patterns to the ones of the Bronze Age regional mines from Bulgaria, Serbia or Transylvania, most likely used as ore sources for their manufacture. The studied samples present relevant traces of As, Ag, Sb, and Co, suggesting the most probable use of copper from Serbia or northern Bulgaria for their manufacture. KW - X-ray fluorescence KW - Synchrotron radiation KW - Proton induced X-ray emission KW - Archaeometry KW - Gold PY - 2011 DO - https://doi.org/10.1039/c0ja00215a SN - 0267-9477 SN - 1364-5544 VL - 26 IS - 5 SP - 917 EP - 921 PB - Royal Society of Chemistry CY - London AN - OPUS4-23191 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grunewald, Christian A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Riesemeier, Heinrich T1 - SRXRF-measurements at non-planar objects: automatic determination of the angle of incidence of the exciting X-ray JF - Journal of analytical atomic spectrometry N2 - For quantitative SRXRF measurements the angle of incidence of the incoming X-ray beam is an important factor. When the sample is focused by a long-range-microscope, the determination of the angle can be automatized using a simple algorithm. This was developed to improve the orientation of especially round or ornate samples. As a side effect the three dimensional surface can be reconstructed, too. KW - X-ray fluorescence KW - Synchrotron radiation KW - Long-range microscope PY - 2011 DO - https://doi.org/10.1039/c0ja00237b SN - 0267-9477 SN - 1364-5544 VL - 26 IS - 5 SP - 1088 EP - 1089 PB - Royal Society of Chemistry CY - London AN - OPUS4-23193 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ried, Peter A1 - Gaber, Martin A1 - Beyer, Katrin A1 - Müller, Ralf A1 - Kipphardt, Heinrich A1 - Kannengießer, Thomas T1 - Thermo Analytic Investigation of Hydrogen Effusion Behavior - Sensor Evaluation and Calibration JF - Steel research international N2 - The well established carrier gas analysis (CGA) method was used to test different hydrogen detectors comprising a thermal conductivity detector (TCD) and a metal oxide semiconducting (MOx) sensor. The MOx sensor provides high hydrogen sensitivity and selectivity, whereas the TCD exhibits a much shorter response time and a linear hydrogen concentration dependency. Therefore, the TCD was used for quantitative hydrogen concentration measurements above 50?µmol/mol. The respective calibration was made using N2/H2 gas mixtures. Furthermore, the hydrogen content and degassing behaviour of titanium hydride (TiH2-x) was studied. This material turned out to be a potential candidate for a solid sample calibration. Vacuum hot extraction (VHE) coupled with a mass spectrometer (MS) was then calibrated with TiH2-x as transfer standard. The calibration was applied for the evaluation of the hydrogen content of austenitic steel samples (1.4301) and the comparison of CGA-TCD and VHE-MS. KW - Hydrogen KW - Steel KW - Vacuum hot extraction KW - Carrier gas analysis KW - Titanium hydride KW - Gas calibration PY - 2011 DO - https://doi.org/10.1002/srin.201000237 SN - 1611-3683 SN - 0177-4832 VL - 82 IS - 1 SP - 14 EP - 19 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-23202 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Oberländer-Târnoveanu, E. A1 - Bugoi, R. A1 - Cojocaru, V. A1 - Radtke, Martin T1 - The Sarmizegetusa bracelets JF - Antiquity N2 - We present the authentication and analysis of these beautiful Dacian bracelets of the first century BC, originally pillaged by treasure hunters and recovered thanks to an international crime chase. They were originally fashioned from gold panned from the rivers or dug from the mines of Transylvania and hammered into the form of coiled snakes. The lack of context is the greatest loss, but a votive purpose is likely given their proximity to the great sacred centre at Sarmizegetusa Regia. KW - Romania KW - Sarmizegetusa KW - Dacian KW - First century BC KW - Gold KW - Bracelets KW - Hoard KW - Sacred centre KW - World heritage site PY - 2010 UR - http://antiquity.ac.uk/ant/084/ant0841028.htm SN - 0003-598x VL - 84 SP - 1028 EP - 1042 PB - Univ. Press CY - Oxford AN - OPUS4-23169 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rodrigues, M. A1 - Schreiner, M. A1 - Mäder, M. A1 - Melcher, M. A1 - Guerra, M. A1 - Salomon, J. A1 - Radtke, Martin A1 - Alram, M. A1 - Schindel, N. T1 - The hoard of Becin - non-destructive analysis of the silver coins JF - Applied physics A N2 - We report the results of an analytical investigation on 416 silver-copper coins stemming from the Ottoman Empire (end of 16th and beginning of 17th centuries), using synchrotron micro X-ray fluorescence analysis (SRXRF). In the past, analyses had already been conducted with energy dispersive X-ray fluorescence analysis (EDXRF), scanning electron microscopy with energy dispersive X-ray spectrometry (SEM/EDX) and proton induced X-ray emission spectroscopy (PIXE).With this combination of techniques it was possible to confirm the fineness of the coinage as well as to study the provenance of the alloy used for the coins. For the interpretation of the data statistical analysis (principal component analysis—PCA) has been performed. A definite local assignment was explored and significant clustering was obtained regarding the minor and trace elements composing the coin alloys. KW - SRXRF KW - Silber KW - Archaeometrie PY - 2010 DO - https://doi.org/10.1007/s00339-010-5627-y SN - 0947-8396 VL - 99 IS - 2 SP - 351 EP - 356 PB - Springer CY - Berlin AN - OPUS4-23170 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Bugoi, R. A1 - Cojocaru, V. A1 - Radtke, Martin A1 - Calligaro, T. A1 - Salomon, J. A1 - Pichon, L. A1 - Röhrs, S. A1 - Ceccato, D. A1 - Oberländer-Târnoveanu, E. A1 - Ionescu, C. A1 - Pop, D. T1 - Dacian bracelets and Transylvanian gold: ancient history and modern analyses JF - ArcheoSciences KW - SRXRF KW - Gold KW - Archaeometrie KW - Authentication KW - Provenance KW - XRF KW - Micro-PIXE KW - Micro SR-XRF KW - Or KW - Authentification KW - FX PY - 2009 SN - 0399-1237 VL - 33 SP - 221 EP - 225 PB - Groupe CY - Rennes AN - OPUS4-23172 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cabral, A.R. A1 - Radtke, Martin A1 - Munnik, F. A1 - Lehmann, B. A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Tupinambá, M. A1 - Kwitko-Ribeiro, R. T1 - Iodine in alluvial platinum-palladium nuggets: evidence for biogenic precious-metal fixation JF - Chemical geology N2 - Synchrotron radiation-induced X-ray fluorescence (SR-XRF) spectrometry was applied to determine iodine concentrations in alluvial Pt–Pd aggregates with delicate morphological features from Córrego Bom Sucesso, Minas Gerais, Brazil. The millimetre-sized botryoidal and rod-shaped grains of alluvial Pt–Pd–Hg intermetallic compounds have surprisingly high concentrations of iodine, in the range from 10 to ~ 120 μg/g. Because iodine is a strongly biophile element, known to be enriched in peatlands and plant remains in soils by microbial activity, its concentration in the Pt–Pd nuggets suggests biogenic precious-metal fixation in the aqueous alluvial milieu. Biogenic and inorganic processes, such as bioreduction and electrochemical metal accretion, could mutually have contributed to the growth of nanoparticles, formed on organic templates, to millimetric Pt–Pd nuggets. KW - Lodine KW - Pt-Pd nuggets KW - Córrego Bom Sucesso KW - Minas Gerais KW - Brazil PY - 2011 DO - https://doi.org/10.1016/j.chemgeo.2010.12.003 SN - 0009-2541 SN - 1872-6836 VL - 281 IS - 1-2 SP - 125 EP - 132 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-23174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kluge, Martin A1 - Ferrero, Fabio T1 - Modeling helps improve safety in the production of teflon JF - Comsol news KW - Self ignition KW - Numerical simulation KW - MITD KW - TFE PY - 2011 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 44 EP - 45 AN - OPUS4-23831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank T1 - Rechnerische Simulation des mechanischen Verhaltens von holzgefüllten Stoßdämpfern von Transportbehältern für radioaktive Stoffe T2 - Jahrestagung Kerntechnik 2011 (Proceedings) N2 - Basierend auf Fallversuchen mit Transportbehältern für radioaktive Stoffe sowie auf einem Versuchsprogramm mit Holzproben wurden die Energieabsorptionsmechanismen identifiziert und ein Modell für das Verhalten von Fichtenholz bei axialer Belastung entwickelt. Das Modell zieht für die Kompression von Holz die seitliche Dehnungsbehinderung – im kontinuumsmechanischen Zusammenhang wäre das die Mehrachsigkeit des Spannungszustandes im Kontinuum – in Betracht. Die Energie, die vom Holz absorbiert werden kann, ist umso größer, je größer die seitliche Dehnungsbehinderung ist. Für die Modellierung mit Finite Elemente Methoden wurden verschiedene Modellierungsstrategien untersucht, keine der vorgeschlagenen Modellierungsstrategien war in der Lage, dass Verhalten von Holz bei Druckbeanspruchung und großen Deformationen inkl. der Entfestigung zu modellieren. Bei Verwendung einer entfestigenden Fließkurve zeigt das Modell ausgeprägte Netzabhängigkeiten und numerischen Instabilitäten. Für die Modellierung der Entfestigung mit Hilfe einer von der Mehrachsigkeit des Spannungszustandes gesteuerten Fließflächenevolution ist kein geeignetes Materialmodell vorhanden. Anhand der Simulation eines Fallversuchs mit einem Behälterkörper und stoßdämpfenden Bauteilen im Maßstab 1:2 wurde gezeigt, dass zwar eine vollständige Modellierung des Stoßdämpferverhaltens inkl. Entfestigung nicht möglich war, aber das Stoßdämpferverhalten mit einer nicht-entfestigenden Fließkurve sinnvoll modelliert werden konnte. Eine Verifikation des Modellierungsansatzes am real zu modellierenden Bauteil ist zwingend erforderlich. Wenn signifikante Änderungen zwischen Verifikations- und Simulationsobjekt auftreten, ist die Zuverlässigkeit der Rechenergebnis als gering zu bewerten. Nur wenn die auftretenden Kompressionsmechanismen durch eine Analyse des Stoßdämpferholzes bestimmt werden können, ist eine zuverlässige Ermittlung von Stoßdämpferkräften- und verformungen möglich. T2 - Jahrestagung Kerntechnik 2011 CY - Berlin, Germany DA - 17.05.2011 KW - Radioaktive Stoffe KW - Transport KW - Stoßdämpfende Bauteile KW - FEM KW - Simulation PY - 2011 SP - 1 EP - 6 AN - OPUS4-23851 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Raedel, Martina A1 - Unger, Brita A1 - Bücker, Michael A1 - Sabel, Martin A1 - Feldmann, Ines T1 - Gold mosaics - material composites and glass-chemical characteristics T2 - GLASSAC 11 - 3rd GLASSAC Conference 'Glass science in art and conservation' N2 - In this study gold mosaics front the past 130 years are reviewed and analysed. Characteristic glass properties and technological specifics are observed and provide important Information on the production process. The insights gained are used for replicas with improved glass properties. T2 - GLASSAC 11 - 3rd GLASSAC Conference 'Glass science in art and conservation' CY - Wertheim, Bronnbach Monastery, Germany DA - 01.05.2011 KW - Erfassung von Goldmosaiken der letzten 130 Jahre mit Aufbau einer Datenbank KW - Herstellungstechnik und Besonderheiten KW - Schichtaufbau mit Glaszusammensetzung und EDX-analysen KW - Glas-chemische Charakteristika verschiedener Goldmosaiktypen KW - Reproduktion PY - 2011 SN - 978-3-8396-0255-3 SP - 51 EP - 54 PB - Fraunhofer Verlag AN - OPUS4-23842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, Andreas A1 - Bender, S. T1 - Electrochemical noise measurements in aqueous paint suspensions T2 - Eurocorr 2012 T2 - Eurocorr 2012 CY - Istanbul, Turkey DA - 2012-09-09 PY - 2012 AN - OPUS4-26587 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hölck, O. T1 - Kinetic analysis of gas sorption and gas induced dilation and relaxation behaviour of PIM-1 compared to other glassy polymers T2 - Euromembrane 2012 T2 - Euromembrane 2012 CY - London, England DA - 2012-09-23 PY - 2012 AN - OPUS4-26630 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hölck, O. A1 - Heuchel, M. T1 - Gas transport in glassy polymers and PNCs - experiment, analysis, modeling of diffusion, sorption and dilation T2 - Workshop: Nanostructured and Nanocomposite Membranes for Gas und Vapour Separation T2 - Workshop: Nanostructured and Nanocomposite Membranes for Gas und Vapour Separation CY - Cetraro, Italy DA - 2012-05-15 PY - 2012 AN - OPUS4-26631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Schönhals, Andreas A1 - Hao, Ning T1 - Correlation of gas diffusivity and local chain mobility in polycarbonate/POSS nanocomposites as determined by broadband dielectric relaxation spectroscopy T2 - Euromembrane 2012 T2 - Euromembrane 2012 CY - London, England DA - 2012-09-23 PY - 2012 AN - OPUS4-26629 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Meyer-Scherf, Ronald A1 - Kluge, Martin A1 - Schröder, Volkmar T1 - A parametric study of shock wave simulations with help of COMSOL multiphysics T2 - COMSOL Conference 2012 (Proceedings) N2 - Adiabatic compression of gases can work as an ignition source and is still one of the main causes of accidents in chemical plants processing tetrafluoroethylene (Reza and Christiansen, 2007). The ignition of tetrafluoroethylene induced by adiabatic compression has been studied experimentally with a setup which allowed for the rapid opening of a high speed valve connecting two portions of a pipeline at different initial pressures. Due to the fast opening time and to the high pressure difference, a shock wave in the pipeline was generated. The propagation of the shock wave and its reflection at the end of the pipeline caused pressure and temperature increase. This led to some ignitions in the experiments performed. Nonetheless, in some test an ignition was not achieved, even if this was expected according to the theoretical temperatures predicted by the Rankine-Hugoniot equations. In order to understand the discrepancy between the experimental results and the theoretical predictions, shock wave simulations have been carried out with COMSOL Multiphysics. The 'High Mach Flow' interface was used, since it solves the heat and impulse equations for fast flows. Figure 1 and Figure 2 show, respectively, the velocity and temperature distribution over time for a simulation in a 0.2 m pipeline of 20 mm in diameter with the following settings: - high pressure section: nitrogen initially at 20 bar; - low pressure section: nitrogen initially at 1 bar; - initial temperature of the system: 20 °C; - adiabatic walls with slip condition for the flow; - laminar flow. As from Figure 1 and Figure 2 the shock wave generation and propagation has been properly computed and the physical properties of the shock wave reflected the prediction of the Rankine-Hugoniot equation. Nonetheless, divergence problem occurred when trying to add turbulence to the system and strange temperature and profiles after the shock wave reflection were achieved if the no slip condition at the walls was chosen. Despite these limitations, it was possible to perform a parametric study and to analyze the effect of the pipe diameter and length on the shock wave evolution. Here simulations with constant wall temperature were carried out, in order to account for the heat losses to the pipe surroundings. Figure 3 shows that the temperature of the reflected wave is maintained for a longer time, if the pipe diameter is larger, due to minor heat losses. On the other hand, Figure 4 shows that higher average temperatures are achieved and maintained for a longer time if the pipe length increases. These results suggest that in the experiments performed by Meyer (2009) the pipe geometry was probably not optimal for the achievement/conservation of high temperatures and might explain the difficulty in inducing ignitions by adiabatic compression. T2 - COMSOL Conference 2012 CY - Milan, Italy DA - 2012-10-10 KW - Adiabatic compression KW - Shock wave KW - Numerical simulation PY - 2012 SN - 978-0-9839688-7-0 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. N1 - Geburtsname von Meyer-Scherf, Ronald: Meyer, R. - Birth name of Meyer-Scherf, Ronald: Meyer, R. SP - 1 EP - 6 AN - OPUS4-26785 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ferrero, Fabio A1 - Zeps, Robert A1 - Kluge, Martin A1 - Schröder, Volkmar A1 - Spoormaker, T. T1 - Analysis of the self-heating process of tetrafluoroethylene in a 100-dm³-reactor JF - Journal of loss prevention in the process industries N2 - There is a lack of data on the self-ignition behaviour of tetrafluoroethylene in industrial sized equipment. Therefore, a facility was designed and constructed for the determination of the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene in a cylindrical reactor with a volume of 100 dm3. Tests with initial pressures of 5 and 10 bar(a) were performed. The Minimum Ignition Temperature of Decomposition of tetrafluoroethylene was observed to decrease with the initial pressure, in agreement with previous experiments with small scale cylindrical vessels. This paper describes the test set-up und gives an overview of the achieved experimental results. In particular the effect of the reactor orientation (vertical or horizontal) is discussed. Furthermore, simplified equations from the Semenov thermal explosion theory are used to attempt extrapolations of previous and current data on the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene to other vessel volumes or initial pressures. Moreover, the experimental data are plotted together against the heated volume to heated surface ratio, which should provide a better extrapolation to other vessel dimensions by taking into account that the efficiency of the dispersion of the heat generated by the reaction is different for two reactors with the same volume but different diameter. Finally, simplified methods for predicting the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene presented previously by the authors are validated for large scale reactors with the experimental data collected within the current work. KW - Tetrafluoroethylene KW - Decomposition KW - Self-ignition KW - Large-scale reactor PY - 2012 DO - https://doi.org/10.1016/j.jlp.2012.06.001 SN - 0950-4230 SN - 1873-3352 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 25 IS - 6 SP - 1010 EP - 1017 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-26786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Guilherme, A. A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Coroado, J. A1 - Dos Santos, J.M.F. A1 - Carvalho, M.L. T1 - Synchrotron micro-XRF with compound refractive lenses (CRLs) for tracing key elements on Portuguese glazed ceramics JF - Journal of analytical atomic spectrometry N2 - Several glazed ceramic fragments (XVIth to XVIIIth centuries) from two production centers in Portugal (Coimbra and Lisbon) were the object of this study. The ones from Coimbra comprise two sets of samples: faiences and tiles. The ones from Lisbon are only tiles (azulejos, in Portuguese). The three main divisions of such pieces are the ceramic support (body), glaze and surface decoration. The system decoration/glaze is not easy to investigate, due to the high heterogeneity resulting from the mixing procedures and firing temperatures used. Moreover, the ability of the pigment to diffuse into the base glaze varies depending on the composition of both the pigment and the glaze in terms of fusibility. In order to raster these effects, high resolution techniques are required. In this work, synchrotron micro-X-ray fluorescence (µ-XRF) analysis was performed to monitor the profiles of the characteristic elements from the colors used and the glaze in well prepared cross-sections of the samples. Key elements are: Co for blue, Mn for purple, Cu for green, Sb for yellow, Pb for the glaze and Fe for the body. The major difference observed is that faiences have glaze thicknesses between 150 and 200 µm and tiles have glaze thicknesses between 350 and 400 µm. Furthermore, in faiences all the pigments except the yellow ones are well dispersed into the glassy matrix, while in tiles, all of them are just partially diffused throughout the glaze. However, differences between the tiles from Coimbra and Lisbon were observed. In the samples from Lisbon, a higher intake from the pigment throughout the glaze is observed. KW - Synchrotron micro-XRF KW - Compound refractive lenses (CRLs) KW - Portuguese glazed ceramics PY - 2012 DO - https://doi.org/10.1039/c2ja30030c SN - 0267-9477 SN - 1364-5544 VL - 27 IS - 6 SP - 966 EP - 974 PB - Royal Society of Chemistry CY - London AN - OPUS4-26789 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Streli, C. T1 - Micro-X-ray absorption spectroscopy with compound refractive lenses JF - Journal of analytical atomic spectrometry N2 - A study regarding the possibility to use compound refractive lenses (CRLs) for X-ray absorption spectroscopy (XAS) was conducted. For XAS measurements the energy of the monochromatic incident beam has to be tuned over an energy range which is broader than the energy bandwidth of a CRL. To prove that µ-XAS with compound refractive lenses is possible, it had to be investigated how changes in the energy influence the beam parameters. This was done by tuning the energy around the nominal energy of the lens and recording images with a high resolution X-ray imaging setup. To investigate the changes in the spot size the scintillator was placed at the nominal focal distance and scans along the beam axis were performed. The effect on the photon flux of the incident beam due to absorption in the lens was investigated by performing XANES measurement on different reference materials with and without CRL. The results of these measurements using a CRL designed for 9 keV are shown and discussed. KW - Micro-XAS KW - Compound refractive lens PY - 2012 DO - https://doi.org/10.1039/c2ja30130j SN - 0267-9477 SN - 1364-5544 VL - 27 IS - 10 SP - 1803 EP - 1808 PB - Royal Society of Chemistry CY - London AN - OPUS4-26790 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hoffmann, Martin T1 - Entwicklung und Validierung einer Race Track Probe (RT P) Development and validation of a racetrack specimen T2 - Materialica 2012 T2 - Materialica 2012 CY - Munich, Germany DA - 2012-10-23 PY - 2012 AN - OPUS4-26894 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Reinholz, Uwe A1 - Pichon, L. A1 - Pacheco, C. A1 - Oberländer-Tarnoveanu, E. T1 - SR-XRF and Micro-PIXE Studies on Ancient Metallurgy of Twelve Dacian Gold Bracelets T2 - SR2A 2012 T2 - SR2A 2012 CY - New York City, NY, USA DA - 2012-06-05 PY - 2012 AN - OPUS4-26920 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Pacheco, C. A1 - Pichon, L. A1 - Oberländer-Târnoveanu, E. T1 - SR XRF and micro-PIXE studies on ancient metallurgy of thirteen Dacian gold bracelets JF - Applied physics A N2 - A thorough microscopic investigation by SR XRF and micro-PIXE brings insight into the probable techniques used in the manufacture of thirteen Dacian gold bracelets, one of the most spectacular archaeological finds ever on the territory of Romania. KW - Micro-SR-XRF KW - Micro-PIXE KW - Archaeometry KW - Gold KW - Romania PY - 2012 DO - https://doi.org/10.1007/s00339-012-7306-7 SN - 0947-8396 VL - 109 IS - 2 SP - 395 EP - 402 PB - Springer CY - Berlin AN - OPUS4-26902 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - The colour Xray camera: basics, applications and perspectives T2 - Analytik 2012 T2 - Analytik 2012 CY - Beijing, China DA - 2012-03-23 PY - 2012 AN - OPUS4-26922 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Praktische Anwendung der Atomtheorie T2 - Galileo Gymnasium T2 - Galileo Gymnasium CY - Berlin, Germany DA - 2012-08-30 PY - 2012 AN - OPUS4-26923 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - First experiences with the combination of polycapillary optics and an energy dispersive pn- CCD detector at BAMline at Bessy T2 - X-ray micro-fluorescence spectroscopy at the PETRA III extension: second user workshop T2 - X-ray micro-fluorescence spectroscopy at the PETRA III extension: second user workshop CY - Hamburg, Germany DA - 2011-09-27 PY - 2011 AN - OPUS4-26924 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - The colour Xray camera: basics, application and perspectives T2 - EXRS 2012 T2 - EXRS 2012 CY - Vienna, Austria DA - 2012-06-18 PY - 2012 AN - OPUS4-26925 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Röntgenfluoreszenzanalyse mit Synchrotronstrahlung an der Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin T2 - Seminar: "Strahlenphysikalische Anwendungen in Technik und Medizin" T2 - Seminar: "Strahlenphysikalische Anwendungen in Technik und Medizin" CY - Vienna, Austria DA - 2011-11-23 PY - 2011 AN - OPUS4-26926 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Die Himmelsscheibe von Nebra: Vermutungen und Fakten T2 - Schul- und Volkssternwarte T2 - Schul- und Volkssternwarte CY - Dahlewitz, Germany DA - 2012-03-09 PY - 2012 AN - OPUS4-26927 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Wehrstedt, Klaus-Dieter A1 - Bulin, Michael T1 - Bandbreiten sicherheitstechnischer Kenngrößen von Stäuben - Erarbeitung von Staubgruppen und zugehöriger Bandbreiten sicherheitstechnischer Kenngrößen auf der Grundlage vorhandener Daten zur Aufnahme in den Gemeinsamen Stoffdatenpool Bund / Länder T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube / 2012 T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Germany DA - 2012-11-06 KW - Sicherheitstechnische Kenngrößen KW - Brennbare Stäube KW - Brandschutz KW - Explosionsschutz PY - 2012 SN - 978-3-18-092182-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte VL - 2182 SP - 37 EP - 50 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-26973 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Stan, D. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Ceccato, D. A1 - Oberländer-Târnoveanu, E. T1 - Studies on archaeological gold items found in Romanian territory using X-ray-based analytical spectrometry JF - Journal of analytical atomic spectrometry N2 - This paper is an overview of the work developed by our group in the investigations of museum objects and alluvial gold, reflected in a series of studies published between 2000–2011, supplemented with new results, unpublished up-to-date. The X-ray based spectrometric techniques employed range from various X-Ray Fluorescence (XRF) investigations to ion beam analysis, including synchrotron radiation XRF and micro-Particle Induced X-ray Emission. The gold objects discussed are mainly part of the Sarmizegetusa Dacian hoards—spiraled bracelets (armbands) and coins. After obtaining in 2011 the permission of the Romanian authorities to take very small (1–2 mg) samples from the most 'unimportant' areas of the Dacian bracelets and several Koson staters, to analyze them by micro-SR-XRF at BESSY, in February 2012, the investigation of several micro-areas of 17 stater and 28 bracelet samples revealed important micro-structural inhomogeneity, especially in Sn and Cu. The same inhomogeneous micro-structure has been seen in Transylvanian alluvial gold. The analyses revealed details on the fingerprint of geological gold deposits and also the main characteristics of ancient gold metallurgy procedures used by the Dacians: a relatively low temperature (lower than Au melting point) and hammering during heating to obtain an ingot through sintering. The use of the sintering procedure was proved for the spiraled bracelets and the Koson without monogram coins, a tradition starting in the Bronze Age in Transylvanian gold processing. The existence of micro-inclusions of Ta-minerals in alluvial gold was also detected, explaining Ta trace presence in the artifacts from the Pietroasa hoard. KW - Micro-SR-XRF KW - Micro-PIXE KW - Archaeometry KW - Gold KW - Romania PY - 2012 DO - https://doi.org/10.1039/c2ja30158j SN - 0267-9477 SN - 1364-5544 VL - 27 IS - 12 SP - 2076 EP - 2081 PB - Royal Society of Chemistry CY - London AN - OPUS4-26991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Bulin, Michael A1 - Wehrstedt, Klaus-Dieter T1 - Bandbreiten sicherheitstechnischer Kenngrößen von Stäuben: Erarbeitung von Staubgruppen und zugehöriger Bandbreiten sicherheitstechnischer Kenngrößen auf Grundlage vorhandener Daten zur Aufnahme in den gemeinsamen Stoffdatenpool Bund/Länder T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Nuremberg, Germany DA - 2012-11-06 PY - 2012 AN - OPUS4-27036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, Andreas A1 - Rosemann, P. T1 - Qualitätsbeurteilung von Schneidwaren mittels KorroPad T2 - GfKORR-Jahrestagung 2012 T2 - GfKORR-Jahrestagung 2012 CY - Frankfurt am Main, Germany DA - 2012-11-06 PY - 2012 AN - OPUS4-27049 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bothe, Martin A1 - Pretsch, Thorsten T1 - Two-way shape changes of a shape-memory poly(ester urethane) JF - Macromolecular chemistry and physics N2 - Phase-segregated PEU exhibits two-way shape changes under various constant stresses. Most distinct actuation (expansion on cooling and contraction on heating) can be detected between +60 and -20 °C when the maximum stress applied during a thermo-mechanical pretreatment approached the point where deformation-induced crystallization of the PBA soft segment sets in. The driving forces for the strain-related two-way shape changes consist of PBA crystallization and PBA melting-induced entropy elasticity. At low constant stresses (<1.5 MPa), entropy elasticity also contributes to specimen expansion on cooling. The results of multiple- cycling experiments imply that PEU is an appropriate candidate for the fabrication of thermoresponsive actuators working under constant stress conditions. KW - Actuation KW - Entropy elasticity KW - Mechanical properties KW - Phase change KW - Polymorphism KW - Poly(ester urethane) KW - Poly(1,4-butylene adipate) KW - Semi-crystallinity KW - Shape memory polymers KW - Stimuli-sensitive polymers KW - Stress KW - Two-way actuator KW - Two-way shape memory PY - 2012 DO - https://doi.org/10.1002/macp.201200096 SN - 1022-1352 SN - 1521-3935 VL - 213 IS - 22 SP - 2378 EP - 2385 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-27074 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Würth, Christian A1 - Resch-Genger, Ute A1 - Kynast, U. A1 - Vorsthove, M. T1 - Optische Eigenschaften von der Cer-dotierten Yttrium Aluminium Granat (YAG:Ce) Nanopatikeln T2 - Arbeitsgruppenseminar AG Hoffmann (TU-Berlin) T2 - Arbeitsgruppenseminar AG Hoffmann (TU-Berlin) CY - Berlin, Germany DA - 2012-01-10 PY - 2012 AN - OPUS4-27075 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Würth, Christian A1 - Resch-Genger, Ute A1 - Kynast, U. A1 - Felbeck, T. A1 - Vorsthove, M. T1 - Luminescence Properties of Cer-dotierten Yttrium-Aluminium-Garnet (YAG:Ce) Nanoparticles T2 - Upcore Joint Seminar T2 - Upcore Joint Seminar CY - Regensburg, Germany DA - 2012-08-30 PY - 2012 AN - OPUS4-27076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Resch-Genger, Ute A1 - Würth, Christian A1 - Kynast, U. A1 - Felbeck, T. A1 - Vorsthove, M. T1 - Inflluence of the Particle Size on the Optical Properties of YAG:Ce T2 - Photochemie Tagung T2 - Photochemie Tagung CY - Potsdam, Germany DA - 2012-10-08 PY - 2012 AN - OPUS4-27077 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Resch-Genger, Ute A1 - Würth, Christian A1 - Kynast, U. A1 - Felbeck, T. A1 - Vorsthove, M. T1 - Inflluence of the Particle Size on the Optical Properties of YAG:Ce T2 - Fachtagung Nano-Additive T2 - Fachtagung Nano-Additive CY - Berlin, Germany DA - 2012-11-19 PY - 2012 AN - OPUS4-27078 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Resch-Genger, Ute A1 - Würth, Christian A1 - Kynast, U. A1 - Felbeck, T. A1 - Vorsthove, M. T1 - Luminescence Properties of Cer-dotierten Yttrium-Aluminium-Garnet (YAG:Ce) Nanoparticles - Absolute Quantum Yields and Influence of Particle Size T2 - DPG Frühlingstagung T2 - DPG Frühlingstagung CY - Berlin, Germany DA - 2012-03-29 PY - 2012 AN - OPUS4-27079 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zeps, Robert A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schröder, Volkmar A1 - Spoormaker, T. T1 - Experimental investigation on the self-heating and decomposition of tetrafluoroethylene in a 100-dm³-reactor T2 - Hazards XXIII Symposium N2 - In the industry there is a lack of data on the Minimum Ignition Temperature of decomposition of tetrafluoroethylene in industrial sized equipment. In order to determine the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene in large scale vessels, a facility was designed and constructed. Tests were carried out in a cylindrical reactor with a volume of 100 dm³ with initial pressures of 5 and 10 bar(a). In agreement with previous experiments with small scale cylindrical vessels, the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene was observed to decrease with the initial pressure. The current paper describes the test setup and summarizes the experimental results achieved. The effect of the reactor adjustment (vertical or horizontal) is discussed. Moreover, simplified equations from the Semenov thermal explosion theory are used to attempt extrapolations of previous and current data on the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene to other initial pressures and vessel volumes. T2 - Hazards XXIII Symposium CY - Southport, UK DA - 2012-11-12 KW - Tetrafluoroethylene KW - Self-heating KW - Large-scale reactor PY - 2012 SN - 978-0-85295-557-4 N1 - Serientitel: Symposium Series – Series title: Symposium Series N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 158 IS - Paper 08 SP - 48 EP - 55 AN - OPUS4-27056 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Dörfel, Ilona A1 - Saliwan Neumann, Romeo T1 - Diffusion of Cr, Fe, and Ti ions from Ni-base alloy inconel-718 into a transition alumina coating JF - Thin solid films N2 - Heat treating metals at high temperatures trigger diffusion processes which may lead to the formation of oxide layers. In this work the diffusion of Cr, Fe and Ti into an alumina coating applied to Inconel-718 is being investigated. Mass gain measurements, UV–vis spectroscopy and transmission electron microscopy were applied in order to study the evolution of the diffusion process. It was found that mainly Cr as well as minor amounts of Fe and Ti are being incorporated into the alumina coating upon prolonged heat treatment at 700 °C. It could be shown that alumina coatings being void of Cr have the same oxidation related mass gain as uncoated samples. However, incorporation of Cr into the alumina coating decreased their mass gain below that of uncoated substrates forming a Cr oxide scale only. KW - Diffusion KW - UV–vis spectroscopy KW - Transmission electron microscopy KW - Alumina coatings KW - Sol-gel deposition PY - 2012 DO - https://doi.org/10.1016/j.tsf.2012.02.006 SN - 0040-6090 VL - 520 IS - 13 SP - 4344 EP - 4349 PB - Elsevier CY - Amsterdam AN - OPUS4-25830 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Mütterlein, Rainer A1 - Wehrstedt, Klaus-Dieter A1 - Scheid, Marc A1 - Böhme, Thilo A1 - Bulin, Michael A1 - Seifert, Alexander T1 - Brenn- und Explosionskenngrößen von Stäuben - Erarbeitung von Bandbreiten und Integration in den GSBL T2 - Behörden-Erfahrungsaustausch T2 - Behörden-Erfahrungsaustausch CY - Berlin, Germany DA - 2012-04-23 PY - 2012 AN - OPUS4-25811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Böhme, Thilo A1 - Bulin, Michael A1 - Scheid, Marc A1 - Schmidt, Martin A1 - Seifert, Alexander A1 - Wehrstedt, Klaus-Dieter T1 - Festlegung relevanter sicherheitstechnischer Kenngrößen von Stäuben für den Explosionsschutz und Erarbeitung der zugehörigen Bandbreiten auf der Grundlage vorhandener Daten zur Aufnahme in den GSBL N2 - Ziel des F&E-Vorhabens des GSBL (BAM Vh 2520) war die Erarbeitung von Datensätzen auf der Grundlage bereits bestehender Staubdaten (für Datenbasis siehe Abschnitt 4) und die Übergabe der erarbeiteten Datensätze in elektronischer Form an den GSBL bis spätestens 31.05.2011. Der entsprechende Forschungs- und Entwicklungsvertrag trat am 01.08.2009 in Kraft. Für die Erarbeitung der Datensätze mussten neuartige Konzepte entwickelt werden (siehe Abschnitt 3.5; Abschnitt 3.3 gibt eine Einführung in das Staub-Fachgebiet und behandelt die Besonderheit von Stäuben). Aufgrund von Schwierigkeiten bei der Auswertung und bei der Zusammenstellung der Daten, die erst im Verlaufe des Projekts erkannt wurden, hat es beträchtliche Verzögerungen bei der Erstellung der Datensätze gegeben. Dies führte zu der Feststellung, dass eine Laufzeitverlängerung des Projekts notwendig war. Im Mai 2011 wurde daher ein entsprechender Antrag beim Auftraggeber gestellt. Der Antrag auf kostenneutrale Laufzeitverlängerung führte schließlich zu einer Änderung des ursprünglichen Forschungs- und Entwicklungsvertrags. Der Änderungsvertrag sah eine Verlängerung des Projekts bis zum 30.04.2012 vor. Um die Datensätze im GSBL abbilden zu können, war es auch erforderlich, eine adäquate Datenstruktur zu entwerfen und diese im GSBL zu implementieren. Die Bekanntgabe der zur Abbildung der Datensätze notwendigen Struktur erfolgte am 11.01.2011 per E-Mail (EXCELDatei gsbldbdir3_23_0029)2. Veränderungen bzw. Präzisierungen dieser Datenstruktur wurden dem GSBL am 19.01.2011 und am 28.01.2011 mitgeteilt, ebenfalls per E-Mail3. Am 19.10.2011 erfolgte eine weitere Änderung, die die sogenannte Nachschlagetabelle betrifft: Der Textinhalt der Tabelle T_STAUBM lautet nun "Auswertung vorhandener Datenkollektive durch Experten-Team." (ursprünglicher Wortlaut: "Auswertung vorhandener Datenkollektive durch Experten"). Die Änderung geht auf einen Wunsch des GSBL-Begleitkreises zurück, der am 07.10.2011 auf der in der BAM stattgefundenen Besprechung vorgebracht wurde. KW - Sicherheitstechnische Kenngrößen von Stäuben KW - Bandbreiten KW - Explosionsschutz KW - GSBL KW - Datenbank PY - 2012 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-260765 SN - 978-3-9815134-0-0 IS - Abschlussbericht SP - 1 EP - 129 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-26076 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Auswertung und Diskussion Ringversuch "EN 15188:2007 Self-ignition temperature" Teilschritte 1 und 2 T2 - 59. Sitzung des Industriearbeitskreises "Brennbare Stäube" T2 - 59. Sitzung des Industriearbeitskreises "Brennbare Stäube" CY - Leverkusen, Germany DA - 2012-06-14 PY - 2012 AN - OPUS4-26097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Williams, S. H. A1 - Hilger, A. A1 - Kardjilov, N. A1 - Manke, I. A1 - Strobl, M. A1 - Douissard, P.A. A1 - Martin, T. A1 - Riesemeier, Heinrich A1 - Banhart, J. T1 - Detection system for microimaging with neutrons JF - Journal of Instrumentation N2 - A new high-resolution detector setup for neutron imaging has been developed based on infinity-corrected optics with high light collection, combined with customized mounting hardware. The system can easily be installed, handled and fitted to any existing facility, avoiding the necessity of complex optical systems or further improved electronics (CCD). This is the first time optical magnification higher than 1:1 has been used with scintillator-based neutron detectors, as well as the first implementation of infinity corrected optics for neutron imaging, achieving the smallest yet reported effective pixel size of 3.375 µm. A novel transparent crystal scintillator (GGG crystal) has been implemented with neutrons for the first time to overcome limitations of traditional powder scintillators (Li6/ZnS, Gadox). The standardized procedure for resolution measurements with the Modulation Transfer Function (MTF) is summarized to facilitate comparison between instruments and facilities. Using this new detector setup, a resolution of 14.8 µm with a field of view of 6 mm × 6 mm has been achieved while maintaining reasonable count times. These advances open a wide range of new possible research applications and allow the potential for additional future developments. KW - Instrumentation for neutron sources KW - Neutron radiography KW - Neutron detectors (cold, thermal, fast neutrons) PY - 2012 DO - https://doi.org/10.1088/1748-0221/7/02/P02014 SN - 1748-0221 VL - 7 IS - P02014 SP - 1 EP - 26 PB - Inst. of Physics Publ. CY - London AN - OPUS4-26433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Komann, Steffen A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Weber, Mike A1 - Qiao, Linan A1 - Droste, Bernhard T1 - Mechanical assessment within type B packages approval: application of static and dynamic calculation approaches JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) N2 - This paper demonstrates exemplarily how numerical and experimental approaches can be combined reasonably in mechanical assessment of package integrity according to the IAEA regulations. The paper also concentrates on the question about how static mechanical approaches can be applied, and what their problems are in relation to dynamic calculation approaches. Under defined impact tests, which represent accident transport conditions, the package has to withstand impact loading, e.g. resulting from a 9 m free drop onto an unyielding target in sequence with a 1 m puncture drop test. Owing to the local character of the interaction between the puncture bar and the cask body, it is possible to develop a dynamic numerical model for the 1 m puncture drop which allows an appropriate simulation of the interaction area. Results from existing experimental drop tests with prototype or small scale cask models can be used for verification and validation of applied analysis codes and models. The link between analysis and experimental drop testing is described exemplarily by considering a regulatory 1 m puncture bar drop test onto the cask body of a recently approved German high level waste transport package. For the 9 m drop test of the package, it is difficult to develop a dynamic numerical model of the package due to the complexity of the interaction between cask body, impact limiters and unyielding target. Dynamic calculations require an extensive verification with experimental results. The simulation of a 9 m drop of a package with impact limiters is thereby often more complex than the simulation of a 1 m puncture drop onto the cask body. A different approximation method can be applied for the consideration of dynamic effects on the impact loading of the package. In a first step, maximum impact force and rigid body deceleration of the cask body during the impact process can be calculated with simplified numerical tools. This rigid body deceleration can subsequently be applied on a verified static numerical model. Dynamic effects, which cannot be covered by the static numerical analysis, have therefore to be considered by using an additional dynamic factor. The paper describes this approach exemplarily for a 9 m horizontal drop of a typical spent fuel cask design. KW - Package assessment KW - Package KW - Packaging KW - Structural analysis PY - 2011 DO - https://doi.org/10.1179/1746510911Y.0000000012 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 22 IS - 4 SP - 179 EP - 183 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-26448 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Robertson, Daniela A1 - Schröder, Hartmut A1 - Böhning, Martin A1 - Brummermann, K. A1 - Kaundinya, I. A1 - Saathoff, F. T1 - Test method for the assessment of the service life of polymeric geosynthetic barriers (GBR-P) for road tunnels T2 - Euro GEO 5 - 5th European geosynthetics congress (Proceedings) T2 - Euro GEO 5 - 5th European geosynthetics congress CY - Valencia, Spain DA - 2012-09-16 KW - Durability KW - Oxidation KW - Acceleration ageing KW - GBR-P PY - 2012 SN - 978-0415-64340-5 VL - 1 IS - Topic: Transport SP - 150 EP - 154 AN - OPUS4-27312 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Selbstentzündungsvorgänge in Schüttgütern - Grundlagen, Bestimmungsmethoden, Einflussgrößen, numerische Simulationen T2 - Kolloquium Anlagetechnik und Anlagesicherheit T2 - Kolloquium Anlagetechnik und Anlagesicherheit CY - Mannheim, Germany DA - 2012-11-28 PY - 2012 AN - OPUS4-27369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mielentz, Frank A1 - Feller, Viktor A1 - Krause, Martin A1 - Orglmeister, R. A1 - Mayer, K. T1 - Schallfeldmodellierung von Ultraschall-Transversalwellen-Prüfköpfen - Modellierung von Prüfkopfarrays mit der Elastodynamischen Finiten Integrationstechnik und der Punktquellensynthese JF - Materials Testing N2 - Ultraschallmessverfahren werden seit Langem erfolgreich für Prüfaufgaben, wie zum Beispiel die Ermittlung von Bauteilgeometrien, im Bauwesen eingesetzt. Um die Schallbündelung der Prüfköpfe zu verbessern, werden oft mehrere Prüfköpfe in einem Array angeordnet. Für die Entwicklung der Prüfkopfarrays ist es zweckmäßig, mithilfe von Modellierungen den Einfluss der Arraygröße, der Anordnung der Einzelprüfköpfe im Array und der Prüffrequenz auf das Schallfeld zu untersuchen. Dazu werden in der Praxis erfolgreich Modellierungen auf der Basis der Elastodynamischen Finiten Integrationstechnik (EFIT) und der Punktquellensynthese angewendet. Beim Aufbau der Arrays kommen zurzeit immer häufiger Transversal-Punktkontaktprüfköpfe zur Anwendung. Daher wird bei der Beschreibung der Schallfeldberechnung insbesondere auf die der Transversalwellenprüfköpfe eingegangen und mithilfe von Modellierungen und Experimenten gezeigt, wie sich die Prüfkopfpositionierung auf die Richtcharakteristik auswirkt. KW - Ultraschall KW - Beton KW - Transversalwellen KW - Modellierung KW - Punktquellensynthese KW - Elastodynamische Finite Integrationstechnik KW - EFIT PY - 2013 DO - https://doi.org/10.3139/120.110510 SN - 0025-5300 VL - 55 IS - 11-12 SP - 856 EP - 864 PB - Hanser CY - München AN - OPUS4-29685 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Würth, Christian A1 - Resch-Genger, Ute T1 - Luminescence Properties of Upconverting NaYF4(Yb,Er) Nanoparticles in water and heavy water T2 - 13th Conference on Methods and Applications of Fluorescence (MAF 13) T2 - 13th Conference on Methods and Applications of Fluorescence (MAF 13) CY - Genoa, Italy DA - 2013-09-08 PY - 2013 AN - OPUS4-29635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Würth, Christian A1 - Resch-Genger, Ute A1 - Hyppänen, I. A1 - Soukka, T. T1 - Integration Sphere Setup for the Absolute Determination of Upconversion Quantum Yields of Rare Earth Doped Nanoparticles T2 - iNOW2013 International Nano Optoelectronics Workshop T2 - iNOW2013 International Nano Optoelectronics Workshop CY - Cargese, France DA - 2013-08-20 PY - 2013 AN - OPUS4-29748 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Würth, Christian A1 - Resch-Genger, Ute A1 - Hyppänen, I. A1 - Soukka, T. T1 - Absolute Photoluminescence Quantum Yield of Hexagonal NaYF4:Er3+,Yb3+ Upconversion Nanoparticles T2 - DPG Frühlingstagung T2 - DPG Frühlingstagung CY - Regensburg, Germany DA - 2013-03-13 PY - 2013 AN - OPUS4-29749 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Seifert, Alexander A1 - Böhme, Thilo A1 - Wehrstedt, Klaus-Dieter A1 - Bulin, Michael ED - Beyer, M. ED - Stolz, T. T1 - Erweiterung der GSBL-Datenbank um sicherheitstechnische Kenngrößen brennbarer Stäube - Erstellung von Staubgruppen und Ableiten bewerteter Bandbreiten T2 - 13. BAM/PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik N2 - Die Beurteilung des Gefahrenpotentials brennbarer Stäube erfolgt üblicherweise mit Hilfe so genannter sicherheitstechnischer Kenngrößen (STK). Häufig werden hierfür in Datenbanken bereitgestellte Werte in der Vergangenheit untersuchter Stäube herangezogen. Insbesondere aufgrund stofflicher Unterschiede der untersuchten Stäube sind erhebliche Streuungen der ermittelten STK in Datenbanken enthaltener namentlich identischer Stäube festzustellen. Die Verwendung der Daten von Einzelstäuben kann daher zu unsicheren Einschätzungen hinsichtlich des Brand- und Explosionsschutzes führen. Vorgestellt wird ein Konzept, Stäube zu praxisrelevanten Gruppen zusammenzufassen und bewertete Bandbreiten sicherheitstechnischer Kenngrößen anzugeben. Die im Rahmen eines vom Sächsischen Landesamt für Umwelt, Landwirtschaft und Geologie, Dresden, geförderten Vorhabens generierten Staubgruppen und zugehörigen Bandbreiten der STK stehen in der Datenbank GSBLpublic für die freie Nutzung zur Verfügung. T2 - 13. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 18.06.2013 KW - Sicherheitstechnische Kenngrößen KW - Stäube KW - Staubexplosionen KW - Datenbank KW - Brand- und Explosionsgefahren PY - 2013 SN - 978-3-95606-062-5 DO - https://doi.org/10.7795/210.20130801U SN - 1868-5838 SP - 170 EP - 177 AN - OPUS4-29822 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schulze, S. A1 - Mayer, K. A1 - Krause, Martin T1 - Spannbetonuntersuchung mit bildgebenden Ultraschallecho-Verfahren JF - Beton- und Stahlbetonbau N2 - Beim Einsatz von Ultraschallecho-Methoden in der zerstörungsfreien Prüfung im Bauwesen stellt die Untersuchung von Spannbetonkonstruktionen eine der anspruchsvollsten Aufgaben für Wissenschaft und Technik dar. Das inhomogene Gefüge aus Beton, schlaffer Bewehrung und – aus Hüllrohr, Spannlitzen und Verpressmörtel bestehenden – Spanngliedern erfordert eine Optimierung von Messtechnik und Auswertesoftware, um verwertbare Aussagen zum Verpresszustand der Hüllrohre zu erhalten. Der vorliegende Beitrag beschreibt die Grundlagen der bildgebenden Darstellung von US-Echo-Daten, die Untersuchung und Datenauswertung an Probekörpern sowie ein Fallbeispiel aus der Praxis. Dabei erweist sich insbesondere die Phasenauswertung zur qualitativen Unterscheidung von Reflektoren als nützlich. Das Prinzip wird erläutert, und es werden Teile eines interaktiven, auf der SAFT-Methode basierenden Softwarepakets vorgestellt. Mit dieser Software können die großflächig gewonnenen Ultraschalldaten auf herkömmlichen PCs oder mobilen Computern zu zwei- und dreidimensionalen Rekonstruktionen berechnet, analysiert und visualisiert werden. Ausgewertet wurden Daten, die mit automatisierten Messsystemen an kleinformatigen Laborprobekörpern und großen Testwänden gewonnen wurden. Im Rahmen der praktischen Anwendung konnten unter Verwendung der vorgestellten Verfahren an einem Spannglied die Lage eines Hüllrohrverstopfers lokalisiert und die Ausdehnung der Blockadestelle eingegrenzt werden.---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Investigation of prestressed concrete using the imaging ultrasonic echo method – Application of phase evaluation for the distinction of reflectors: The application of ultrasound methods for the non-destructive assessment of pre-stressed concrete members is one of the biggest challenges in the field of non-destructive testing in civil engineering. The inhomogeneous composition of concrete, reinforcement and tendons, which itself consist of ducts, steel wires and grouting material, requires an optimisation of measuring technique and analysis software to gain reliable information about the grouting condition of the ducts. This article describes the fundamentals of the visualisation of ultrasound echo data, the investigation and data analysis at specimen and a case study. Here especially the phase evaluation proves to be very useful for the distinction of reflectors. The basic principle is explained and parts of an interactive software module, which is based on the SAFT method, is presented. With this software it is possible to calculate, analyse and visualise 2D and 3D reconstructions of large ultrasound data sets with conventional PCs or mobile computers. Data has been analysed, which were recorded with automatic measurement systems at small scale laboratory specimens and a large scale testing wall. In the frame of the practical application it was possible to localise the position and extent of a blockade within a duct. KW - Ultraschallecho KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Ultraschallecho-Methode KW - Bildgebende Auswertung KW - SAFT-Rekonstruktion KW - Phasenauswertung KW - Spannbeton KW - Verpresszustand KW - Rekonstruktionssoftware KW - Non-destructive testing in civil engineering (NDT-CE) KW - Ultrasound echo method KW - Imaging methods KW - SAFT reconstruction KW - Phase evaluation KW - Pre-stressed concrete KW - Grouting condition KW - Reconstruction software KW - Bauwerkserhaltung/Sanierung PY - 2013 DO - https://doi.org/10.1002/best.201300062 SN - 0005-9900 SN - 1437-1006 VL - 108 IS - 12 SP - 845 EP - 853 PB - Ernst CY - Berlin AN - OPUS4-29838 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Linnemann, Konrad A1 - Schubert, Sven A1 - Ballheimer, Viktor A1 - Sterthaus, Jens A1 - Droste, Bernhard T1 - Reflection on BAM design assessment of TN24E spent fuel transport package T2 - PATRAM 2013 T2 - PATRAM 2013 CY - San Francisco, CA, USA DA - 2013-08-18 PY - 2013 AN - OPUS4-29764 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Curado, Jessica A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Scharf, O. T1 - Slicing - A New Method For Non Destructive 3D Elemental Sensitive Characterization Of Materials T2 - International Congress on X-Ray Optics and Microanalysis T2 - International Congress on X-Ray Optics and Microanalysis CY - Hamburg, Germany DA - 2013-09-02 PY - 2013 AN - OPUS4-29897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Menzel, Michael A1 - Fittschen, U.E.A. A1 - Scharf, Oliver T1 - ABSORBTION OF THE PRIMARY BEAM IN SR-TXRF ANALYSIS: EXPERIMENTAL VISUALIZATION USING A COLOR X-RAY CAMERA T2 - International Congress on X-Ray Optics and Microanalysis T2 - International Congress on X-Ray Optics and Microanalysis CY - Hamburg, Germany DA - 2013-09-02 PY - 2013 AN - OPUS4-29898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Scharf, O. T1 - The Color X-Ray Camera: Imaging and Beyond T2 - ANKA/KNMF User Meeting 2013 T2 - ANKA/KNMF User Meeting 2013 CY - 76646 Bruchsal, Deutschland DA - 2013-09-26 PY - 2013 AN - OPUS4-29900 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Menzel, Michael A1 - Fittschen, U.E.A. A1 - Scharf, O. T1 - ABSOPTION OF THE PRIMARY BEAM IN SR-TXRF ANALYSIS: EXPERIMENTAL VISUALIZATION USING A COLOR X-RAY CAMERA T2 - Fifth Joint BER II User Meeting T2 - Fifth Joint BER II User Meeting CY - Berlin, Germany DA - 2013-12-04 PY - 2013 AN - OPUS4-29901 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Curado, Jessica A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Guttler, R.A.S. A1 - Rizzutto, M.A. T1 - u-SRXRF characterization of Brazilian emeralds T2 - Fifth Joint BER II and BESSY II User Meeting T2 - Fifth Joint BER II and BESSY II User Meeting CY - Berlin, Germany DA - 2013-12-04 PY - 2013 AN - OPUS4-29902 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Fittschen, U.E.A. A1 - Menzel, M. A1 - Scharf, O. A1 - Horntrich, C. A1 - Streli, C. A1 - Montoya, V. A1 - Havrilla, G.J. A1 - McIntosh, K. T1 - THE IDEAL SPECIMENT FOR TOTAL REFLECTION X-RAY FLUORESCENCE (TKRF) ANALYSIS:RESULTS FROM SIMULATIONS AMD EXPERIMENTAL EVALUATION T2 - Fifth Joint BER II and BESSY II User Meeting T2 - Fifth Joint BER II and BESSY II User Meeting CY - Berlin, Germany DA - 2013-12-04 PY - 2013 AN - OPUS4-29903 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Curado, Jessica A1 - Riesemeier, Heinrich A1 - Scharf, O. T1 - Slicing - A New Method For Non Destructive 3D Elemental Sensitive Characterization Of Materials T2 - Fifth Joint BER II and BESSY II User Meeting T2 - Fifth Joint BER II and BESSY II User Meeting CY - Berlin, Germany DA - 2013-12-04 PY - 2013 AN - OPUS4-29904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Guerra, M. F. A1 - Reiche, I. T1 - Between the Eurasien steppes and China: provenancing the Xiongnu gold by IBA and SRXRF T2 - Fifth Joint BER II and BESSY II User Meeting T2 - Fifth Joint BER II and BESSY II User Meeting CY - Berlin, Germany DA - 2013-12-04 PY - 2013 AN - OPUS4-29905 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bothe, Martin A1 - Emmerling, Franziska A1 - Pretsch, Thorsten T1 - Poly(ester urethane) with varying polyester chain length: Polymorphism and shape-memory behavior JF - Macromolecular chemistry and physics N2 - The swelling, viscoelastic, and mechanical behavior of phase-segregated poly(ester urethane) (PEU) block copolymers, composed of 4,4'-methylenediphenyl diisocyanate, 1,4-butanediol as a chain extender, and crystallizable poly(1,4-butylene adipate) (PBA) with molecular weights between 1330 and 4120 g mol-1, are investigated. Wide-angle X-ray scattering (WAXS) is employed to study the overall PEU crystallinity, which increases from 8.6 to 13.6% at higher PBA contents. The existence of two crystalline, polymorphic PBA phases, a thermodynamically stable α phase and a metastable β phase, is confirmed by further WAXS measurements. Calorimetric and thermomechanical investigations give evidence for controllable PBA polymorphic behavior. The crystallization conditions, like the cooling rate, affect the emerging polymorphic mixture, whereas the storage conditions either promote or inhibit the polymorphic (β to α) transition. The introduced concepts represent a new approach for gaining control over programmable thermo­responsiveness, which may be transferable to other shape-memory polymers with polymorphic switching segments. KW - Shape-memory polymers KW - Stimuli-sensitive polymers KW - Poly(ester urethane) KW - Polymorphism PY - 2013 DO - https://doi.org/10.1002/macp.201300464 SN - 1022-1352 SN - 1521-3935 VL - 214 IS - 23 SP - 2683 EP - 2693 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-29892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Fittschen, U.E.A A1 - Menzel, M. A1 - Scharf, O. A1 - Horntrich, C. A1 - Montoya, V. A1 - McIntosh, K. A1 - Havrilla, G.J. A1 - Streli, C. T1 - THE IDEAL SPECIMENT FOR TOTAL REFLECTION X-RAY FLUORESCENCE (TXRF) ANALYSIS: RESULTS FROM SIMULATIONS AND EXPERIMENTAL EVALUATION T2 - Denver X-Ray Conference T2 - Denver X-Ray Conference CY - Westminster, CO, USA DA - 2013-08-05 PY - 2013 AN - OPUS4-29869 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Fittschen, U.E.A. A1 - Menzel, M. A1 - Scharf, O. A1 - Horntrich, C. A1 - Streli, C. A1 - Montoya, V. A1 - McIntosh, K. A1 - Havrilla, G.J. T1 - THE IDEAL SPECIMENT FOR TOTAL REFLECTION X-RAY FLUORESCENCE (TXRF) ANALYSIS: RESULTS FROM SIMULATIONS AND EXPERIMENTAL EVALUATION T2 - International Congress on X-Ray Optics and Microanalysis T2 - International Congress on X-Ray Optics and Microanalysis CY - Hamburg, Germany DA - 2013-09-02 PY - 2013 AN - OPUS4-29871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Fittschen, U.E.A A1 - Menzel, M. A1 - Scharf, Oliver A1 - Horntrich, C. A1 - Montoya, V. A1 - McIntosh, K. A1 - Havrilla, G.J. T1 - Evaluation of total reflection X-ray fluorescence (TXRF) analysis using a color X-ray camera (CXC) T2 - 15th International Conference on Total Reflection X-Ray Fluorescence Analysis and Related Methods (TXRF2013) T2 - 15th International Conference on Total Reflection X-Ray Fluorescence Analysis and Related Methods (TXRF2013) CY - Osaka, Japan DA - 2013-09-23 PY - 2013 AN - OPUS4-29859 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Röntgenfluoreszenzanalyse mit Synchrotronstrahlung an der Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin T2 - Seminar: "Strahlenphysikalische Anwendungen in Technik und Medizin" T2 - Seminar: "Strahlenphysikalische Anwendungen in Technik und Medizin" CY - Vienna, Austria DA - 2013-01-16 PY - 2013 AN - OPUS4-29861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - "Golden Past and Future" - Applications of Synchrotron Radiation for Cultural Heritage T2 - 1st INTERNATIONAL CONFERENCE ON INNOVATION IN ART RESEARCH AND TECHNOLOGY INART´13 T2 - 1st INTERNATIONAL CONFERENCE ON INNOVATION IN ART RESEARCH AND TECHNOLOGY INART´13 CY - Evora, Portugal DA - 2013-07-10 PY - 2013 AN - OPUS4-29862 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Krämer, M. A1 - Dietsch, R. A1 - Falkenberg, G. A1 - Beckhoff, B. A1 - Hönicke, P. A1 - Fittschen, U.E.A. A1 - Simon, R. T1 - NEW INVESTIGATIONS WITH NANOGRAM MULTI-ELEMENT REFERENCE SAMPLES FOR XRF AND TXRF ANALYSIS T2 - Denver X-Ray Conference T2 - Denver X-Ray Conference CY - Westminster, CO, USA DA - 2013-08-05 PY - 2013 AN - OPUS4-29864 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konschak, Martin A1 - Scheruhn, Willi T1 - Gasrücktrittsicherungen, ihr Wert bei Schweiß- u. Schneidarbeiten JF - Mitteilungen der BEFA PY - 1953 VL - 5 IS - 9 SP - 1 EP - 4 PB - Beratungsstelle für Autogentechnik CY - Hürth AN - OPUS4-30021 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Zeps, Robert T1 - Simulation and experimental determination of the self-ignition of tetrafluoroethylene in a 100-dm³-autoclave T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 2013-11-07 PY - 2013 SN - 978-3-86011-058-4 IS - P-15 SP - 1 EP - 7 AN - OPUS4-30026 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Ferrero, Fabio A1 - Zeps, Robert A1 - Kreißig, Michael A1 - Steinhübel, Marco T1 - Untersuchung des Zündverhaltens von Tetrafluorethylen/Luft-Gemischen durch Kompressionsvorgänge im Pilot- und Industriemaßstab T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - Die adiabate Kompression stellt insbesondere für zerfallsfähige Gase eine potentielle Zündquelle sowohl bei Herstellungsprozessen als auch beim Umgang in weiterverarbeitenden Betrieben oder beim Endnutzer dar. So kam es in der Vergangenheit etwa in TFE-verarbeitenden Anlagen wiederholt zu Störfällen durch Adiabate Kompressionsvorgänge des Monomers. Unter dem Begriff „zerfallsfähige Gase“ oder auch „chemisch-instabile Gase“ versteht man Gase, bei denen es auch in Abwesenheit eines Oxidators nach einer Zündung zu einem explosionsartigem Reaktionsverlauf kommen kann, wie es etwa beim Tetrafluorethylen (TFE) der Fall ist. Die Zerfallsreaktion von TFE ist in Gleichung dargestellt. Sobald eine Zündquelle die Zerfallsreaktion initiiert, kann diese bei bestimmten Anfangsbedingungen von Druck und Temperatur explosionsartig verlaufen. Die schnelle Reaktionsrate zusammen mit der hohen Exothermie der Reaktion kann zur Bildung von heftigen Explosionen führen, wie sie sonst nur bei Brenngas/Oxidator-Gernischen üblich sind. T2 - 11. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2013 PY - 2013 SN - 978-3-86011-058-4 IS - P-14 SP - 1 EP - 6 AN - OPUS4-30027 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fettig, Ina A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Raspe, Tina A1 - Piechotta, Christian T1 - Evaluation of a headspace solid-phase microextraction method for the analysis of ignitable liquids in fire debris JF - Journal of forensic sciences N2 - The chemical analysis of fire debris represents a crucial part in fire investigations to determine the cause of a fire. A headspace solid-phase microextraction (HS-SPME) procedure for the detection of ignitable liquids in fire debris using a fiber coated with a mixture of three different sorbent materials (Divinylbenzene/Carboxen/Polydimethylsiloxane, DVB/CAR/PDMS) is described. Gasoline and diesel fuel were spiked upon a preburnt matrix (wood charcoal), extracted and concentrated with HS-SPME and then analyzed with gas chromatography/mass spectrometry (GC/MS). The experimental conditions—extraction temperature, incubation and exposure time—were optimized. To assess the applicability of the method, fire debris samples were prepared in the smoke density chamber (SDC) and a controlled-atmosphere cone calorimeter. The developed methods were successfully applied to burnt particleboard and carpet samples. The results demonstrate that the procedure that has been developed here is suitable for detecting these ignitable liquids in highly burnt debris. KW - Forensic science KW - Arson analysis KW - Fire debris KW - Ignitable liquids KW - Solid-phase microextraction KW - Smoke density chamber KW - Cone calorimeter PY - 2013 UR - http://onlinelibrary.wiley.com/doi/10.1111/1556-4029.12342/full DO - https://doi.org/10.1111/1556-4029.12342 SN - 0022-1198 SN - 1556-4029 VL - 59 IS - 3 SP - 743 EP - 749 PB - Wiley CY - Hoboken, NJ, USA AN - OPUS4-30038 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Niebergall, Ute A1 - Adam, Adeline A1 - Stark, Wolfgang T1 - Impact of biodiesel sorption on mechanical properties of polyethylene JF - Polymer Testing N2 - The time-dependent sorption of biodiesel in a typical polyethylene for container applications is investigated in comparison to conventional diesel fuel at three different temperatures. In this context, the desorption behavior is also addressed. Subsequently, the effects of both penetrants on mechanical properties are characterized in terms of impact strength and dynamic-mechanical analysis. The discussion of property changes is firstly based on the sorption kinetics of biodiesel and diesel, which is determined by immersion experiments allowing for the calculation of respective diffusion coefficients. Changes in impact strength as determined by the Charpy method are further characterised in more detail by analyzing the fracture surfaces, and correlated with results of dynamic-mechanical analysis. KW - Biodiesel KW - Fuel sorption KW - Desorption KW - Impact strength KW - Dynamic-mechanical analysis KW - PE-HD PY - 2014 DO - https://doi.org/10.1016/j.polymertesting.2013.12.003 SN - 0142-9418 VL - 34 SP - 17 EP - 24 PB - Elsevier Science CY - Amsterdam [u.a.] AN - OPUS4-30096 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Aurich, Dietmar A1 - Martin, Erich T1 - Werkstoffe, Baustoffe einschließlich Prüfverfahren und Prüfeinrichtungen - Metallische Werkstoffe JF - VDI-Zeitschrift PY - 1964 SN - 0372-543X VL - 106 IS - 27 SP - 1365 EP - 1372 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-30148 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Löhberg, Karl A1 - Martin, Erich A1 - Veith, Helmut T1 - Zum Spannung-Dehnung-Verhalten von Baustählen bei Wechselbeanspruchung JF - Archiv für das Eisenhüttenwesen PY - 1972 SN - 0003-8962 VL - 43 IS - 10 SP - 789 EP - 796 PB - Verl. Stahleisen CY - Düsseldorf AN - OPUS4-30190 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nehrig, Marko A1 - Feldkamp, Martin A1 - Bletzer, Claus Wilhelm A1 - Wille, Frank T1 - Thermal test driven pressure build-up inside type-B packages containing wet radioactive waste T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials (Proceedings) N2 - In recent years several German approval procedures for ductile cast iron transport containers containing wet intermediate level waste were conducted. BAM, as one of the German competent authorities, was involved in the complex design assessment work with this specific issue. Thermal analysis is one part of the authority assessment work done by BAM in Germany. The radioactive contents of package designs which were not dried, only drained, consist of saturated ion exchange resin and a small amount of free water. Compared to the safety assessment of packages with dry content, attention must be paid to some more specific points. The most interesting point, however, is the pressure build-up inside the package due to vaporization. This could be caused by radiolysis of the liquid and must be taken into account for the storage period. The inner pressure of the package leads to mechanical loads to the package body, the lid and the lid bolts. Thus, the pressure is the driving force on the gasket system regarding the activity release and a possible loss of tightness. The paper deals primarily with the pressure build-up inside the package caused by the transport regulatory thermal test (30 min at 800 °C) as part of the cumulative test scenario under accident conditions of transport. The pressure build-up is estimated by calculation in a very conservative way regarding conduction and heat radiation. Furthermore the paper discusses a conservative approach for the estimation of the resulting pressure depending on the percentage of water inside the cask. To get trustworthy results without an exact specification of the content, experimental fire tests should be conducted. However, this paper shows the difficulties of assessing casks containing wet content. From the authority assessment point of view, drying of the content could be an effective way to avoid the above described pressure build-up and the associated difficulties for the safety assessment. T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials CY - San Francisco, CA, USA DA - 18.08.2013 KW - Type-B KW - Wet content KW - Pressure build-up KW - Radioactive waste KW - Thermal test PY - 2013 SP - Paper 108, 1 EP - 10 PB - Omnipress AN - OPUS4-30197 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Scheid, Marc A1 - Schmidt, Martin A1 - Krause, U. T1 - Untersuchung des Explosionsverhaltens von Nano-Stäuben T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop N2 - Dieser Beitrag beschreibt einen modifizierten Versuchsaufbau für die Prüfapparatur 20-L Kugel, der es ermöglicht, die zu untersuchenden Staubproben bis kurz vor deren Entzünden unter Ausschluss von Sauerstoff zu handhaben. Dieser modifizierte Aufbau wurde entwickelt, um die Bestimmung Sicherheitstechnischer Kenngrößen von möglichst unpassivierten Nanostäuben zu gewährleisten. Das Ziel dieser Modifikationen ist es, festzustellen, ob es bei der Standardapparatur und -prüfverfahren zu einer Unterschätzung der Explosionsheftigkeit und Zündempfindlichkeit durch Passivierung von Nanonstäuben vor der eigentlichen Untersuchung kommen könnte. Zu diesem Zweck wurden zwei verschiedene Methoden (das sogenannte Inertisierungsverfahren und das modifizierte Verfahren mit Verteilerschale) verwendet. Beide Methoden sind in diesem Artikel beschrieben. Er umfasst experimentelle Ergebnisse von Mikrostäuben, welche zur Validierung verwendet worden und darüber hinaus erste Ergebnisse mit Eisen und Aluminium Nanostäuben, die bis kurz vor dem Entzünden unter inerten Bedingungen gehandhabt worden. Das getestete Nano Eisen reagiert pyrophor, sobald es mit Luft in Kontakt kam, während bei dem untersuchten Nano Aluminium solches Verhalten nicht generell beobachtet werden konnte. Die Versuche mit Nano Aluminium und dem Inertisierungsverfahren zeigten einen höheren Druckanstieg im Vergleich zum Standard-Prüfverfahren. Dies könnte auf einen unterschiedlichen Grad der Passivierung hindeuten. Um diese Beobachtung näher zu untersuchen, sind weitere Versuche mit einer größeren Anzahl an Stäuben notwendig. T2 - 3. Magdeburger Brand- und Explosionsschutztag / vfdb-Workshop CY - Magdeburg, Germany DA - 21.03.2013 KW - Explosion KW - Brennbare Stäube KW - Nanostäube PY - 2013 SN - 978-3-00-041601-9 SP - 1 EP - 11 AN - OPUS4-28849 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Deubel, Jan A1 - Werrel, Martin A1 - Krüger, Simone A1 - Raspe, Tina T1 - Raumbrände - Teil 1: Versuchsaufbau und brandtechnologische Untersuchungen T2 - BAM Innovationsoffensive - Projekt Brandspurenanalytik N2 - Dieser Bericht behandelt die Durchführung, Auswertung und Ergebnisse einer Versuchsserie zu Raumbränden. Diese wurde zur Untersuchung von Fragestellungen zum Einfluss von Brandbeschleuniger auf den Brandverlauf sowie zu den Möglichkeiten des Nachweises des Brandbeschleunigers in kriminaltechnischen Ermittlungen durchgeführt. Die Versuche haben im Rahmen des Forschungsprojekts Brandspurenanalytik der Bundesanstalt für Materialforschung und -prüfung im Jahr 2012 an der Brandprüfstelle Laue der Gesellschaft für Materialforschung und Prüfungsanstalt für das Bauwesen Leipzig mbH stattgefunden. Im Forschungsprojekt wurden verschiedene Materialien und ihr Brandverhalten in Kombination mit flüssigen Brandbeschleunigern in der Rauchdichtekammer (DIN EN ISO 5659-2), dem Cone Calorimeter (ISO 5660-1) und dem Single Burning Item Test (DIN EN 13823) untersucht. Die Untersuchungen hatten zwei Schwerpunkte. Einerseits wurde im Anschluss an die Versuche der Brandrückstand mit analytischen Methoden mit dem Ziel des Nachweises des Brandbeschleunigers untersucht. Andererseits dienen die gemessenen Größen wie Massenverlustrate, Wärmefreisetzungsrate und Temperaturen innerhalb der Proben als Vergleichsgrößen bei der Validierung numerischer Simulationen und der genutzten Materialmodelle. Ergänzend zu den kleinskaligen Versuchen wurden die selben Materialien in den in diesem Bericht vorgestellten Raumbränden verwendet, um das Brandverhalten im Originalmaßstab zu untersuchen. Der gesamte Bericht gliedert sich in drei Teile. Der hier vorliegende Teil 1 thematisiert den Aufbau, die Durchführung und die brandtechnologische Auswertung der Versuche und diskutiert Untersuchungsergebnisse zum Brandverlauf. In Teil 2 werden die analytischen Methoden zum Nachweis des Brandbeschleunigers in den Brandrückständen vorgestellt und ausgewertet und in Teil 3 werden Empfehlungen zur Probenahme von Proben zum Brandbeschleunigernachweis auf Basis der gewonnen Erkenntnisse im Forschungsprojekt gegeben sowie die Ergebnisse der in diesem Bericht vorgestellten Versuche vorgestellt. Die hier beschriebenen Versuche bildeten einen typischen Wohnzimmerbrand ab. In einem Brandraum mit einer Fläche von 20m² wurden verschiedene Einrichtungsgegenstände, wie Sofas, Regale, ein Esstisch, vier Stühle und ein Couchtisch, als Brandlast angeordnet. Insgesamt wurden fünf Versuche bei identischer Brandlast durchgeführt. Beim ersten Versuch erfolgte die Zündung mit einem Feuerzeug an einem der Sofas. Bei den vier weiteren Versuchen wurde mit einem Benzin-Diesel-Gemisch als Brandbeschleuniger an jew. unterschiedlichen Positionen im Brandraum gezündet. Während dem Versuch wurden die Temperaturen im Brandraum mit Mantelthermoelementen, Wärmeströme auf Oberflächen mit Plattenthermometern, die Konzentration verschiedener Gasspezies, der globale Massenverlust, der Fluidmassenstrom durch die Zuluftöffnung und die Wärmefreisetzungsrate gemessen. Im Anschluss an den Versuch wurden Brandschutt- und Rußwischproben genommen. Diese wurden mit dem Ziel des Nachweises der verwendeten Brandbeschleuniger analysiert. Die Zündung mit Brandbeschleuniger führte primär zu einer erhöhten Brandentwicklungsgeschwindigkeit. Der Flashover trat bei allen Versuchen, die mit Brandbeschleuniger gezündet wurden, wesentlich früher auf, als bei dem ersten Versuch, der mit einem Feuerzeug gezündet wurde. Die erreichten Maximalwerte der brandtechnologischen Kenngrößen, wie beispielsweise die Temperaturen im Brandraum oder die Wärmefreisetzungsrate, waren jedoch bei allen fünf Versuchen in der gleichen Größenordnung. Die gewonnen Daten zum Brandverlauf können als Vergleichswerte für numerische Simulationen verwendet werden. KW - Raumbrände KW - Rauchgase KW - Wärmefreisetzung KW - Rauchgastemperaturen KW - Analytik PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-294517 SN - 978-3-9815944-2-3 SN - 0938-5533 SP - 1 EP - 278 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-29451 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mensinger, M. A1 - Fischer, O. A1 - Oberhaidinger, F. A1 - Stimmelmayer, L. A1 - Ebell, Gino A1 - Babutzka, Martin T1 - Grouted joint for integral composite frame bridges suitable for hot dip galvanizing N2 - Due to the corrosion resistance of carbon steel, bridge constructions are currently protected against corrosion by applied coating systems. These coating systems need to be renewed after approximately 25 50 years. Galvanized constructions without any welding areas at the construction site could be prepared as grouted joints and can be used without any renewing for about 100 years. T2 - Intergalva 2022 CY - Rome, Italy DA - 20.06.2022 KW - Corrosion KW - Galvanized steel KW - Bridge PY - 2022 AN - OPUS4-55096 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, Dejian A1 - Schmidt, Martin A1 - Huang, W. A1 - Wei, A. A1 - Krause, U. A1 - Wu, W. T1 - Inhibition effect of N2/CO2 blends on the minimum explosion concentration of agriculture and coal dusts JF - Powder Technology 399 (2022) 117195 N2 - Minimum explosion concentration (MEC) of three agriculture dusts and two coal dusts was studied via a 20-L explosion chamber to reveal the role of gaseous inhibitors. Both active method (CO2 diluting air) and passive method (CO2 replacing O2) were used. The TG and DTG thermal analysis tests were conducted to study the pyrolysis and combustion characteristics of dust samples. An alternative explosion criterion based on combustion duration time was used to determine MEC, and compared with the standardized overpressure method. Under 10-kJ ignition condition, as oxygen mole fraction (XO2) decreased from 21% to 10%, MEC of agriculture dusts and coal dusts respectively increased by around 5 times and 2 times. The active inerting method with a lower N2/CO2 ratio was found to have a better suppression effect on the explosion of the five carbonaceous dusts because the blend has a higher specific heat and a lower oxygen diffusion rate. KW - CO2/N2 ratio KW - Explosion criterion KW - Combustion kinetics KW - Inerting effect KW - Explosion characteristics PY - 2022 DO - https://doi.org/10.1016/j.powtec.2022.117195 SN - 0032-5910 VL - 399 SP - 1 EP - 12 PB - Elsevier B.V. AN - OPUS4-55013 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Babutzka, Martin A1 - et al., T1 - Exposure Site Catalogue - Catalogue of atmospheric corrosion field exposure sites in Europe N2 - Exposure sites and outdoor exposure have always been a part of atmospheric corrosion research providing the “final answer”, although at the cost of long exposure times. Individual exposure programs such as ISOCORRAG, MICAT and ICP Materials have resulted in collaborative networks of exposure sites. So far, however, there has been no collective effort to put together currently active sites in a comprehensive manner and across programs and nations. The information collected in the catalogue is possible thanks to the work of all individual site managers listed as contact persons, efforts of members of Working Party 25 (WP25) Atmospheric Corrosion of the European Federation of Corrosion (EFC) and financial support of the EFC. With this Catalogue you can both get a general overview of what is available and be guided if you are looking for a particular environment with certain characteristics. KW - Atmospheric Corrosion KW - Atmosphärische Korrosion KW - Corrosion KW - Korrosion KW - Exposure KW - Auslagerungsversuche PY - 2022 UR - https://efcweb.org/Scientific+Groups/WP25_+Atmospheric+Corrosion/Current+Activities/_/Exposure%20site%20catalogue%20EFC%20lores.pdf SP - 1 EP - 56 PB - European Federation of Corrosion, EFC AN - OPUS4-55284 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lilensten, L. A1 - Provost, K. A1 - Perrière, L. A1 - Fonda, E. A1 - Couzinié, J. A1 - Amman, F. A1 - Radtke, Martin A1 - Dirras, G. A1 - Guillot, I. T1 - Experimental investigation of the local environment and lattice distortion in refractory medium entropy alloys JF - Scripta Materialia N2 - EXAFS analysis of pure elements, binary and ternary equiatomic refractory alloys within the Nb-Zr-Ti-Hf- Ta system is performed at the Nb and Zr K-edges to analyze the evolution of the chemical local environ- ment and the lattice distortion. A good mixing of the elements is found at the atomic scale. For some compounds, a distribution of distances between the central atom and its neighbors suggests a distortion of the structure. Finally, analysis of the Debye-Waller parameters shows some correlation with the lat- tice distortion parameter δ², and allows to quantify experimentally the static disorder in medium entropy alloys. KW - BAMline KW - Refractory alloys KW - EXAFS KW - Debye-Waller parameter PY - 2022 DO - https://doi.org/10.1016/j.scriptamat.2022.114532 SN - 1359-6462 VL - 211 SP - 1 EP - 6 PB - Elsevier Ltd. AN - OPUS4-55287 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Margreiter, R. A1 - Baumann, J. A1 - Mantouvalou, I. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Strub, E. T1 - Investigations on fire-gilding JF - Archaeometry N2 - Fire-gilding is a historic technique for the application of golden layers on a number of different base materials utilizing a gold amalgam. This technique leaves a significant amount of Hg in the golden layer, giving archeometrists a reliable indicator to identify firegildings. Recent findings on presumably fire-gilded objects have shown in several cases significantly lower Hg content than previously studied objects. This prompted a synchrotron-based X-ray fluorescence investigation into the Hg distribution along the material–gilding interface, as well as a series of measurements regarding the Hg content development in fire-gilded samples during artificial aging. This work presents findings on laboratory-prepared fire-gildings, indicating an Hg enrichment at the interface of firegilded silver samples. Notably, such an enrichment is missing in fire-gilded copper samples. Further, it is confirmed that fire-gilded layers typically do not undercut an Hg bulk content of 5%. In this light, it seems improbable that ancient samples that contain <5% Hg are fire-gilded. The results presented in this study might lead to a non-destructive method to identify the Hg enrichment at the interface. This might be obtained by a combination of different non-destructive measurements and might also work unambiguously in samples in which the gold top layer is altered. KW - BAMline KW - X-Ray Fluorescence KW - Gilding KW - Depth profile KW - Archaeometry PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-552885 DO - https://doi.org/10.1111/arcm.12797 SN - 0003-813X SP - 1 EP - 14 PB - Wiley online library AN - OPUS4-55288 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Babutzka, Martin A1 - Valet, Svenja A1 - Kotula, Stefan A1 - Burkert, Andreas A1 - Gümmer, K. A1 - Bender, S. A1 - Huckshold, M. T1 - Normentwurf für ein Prüfverfahren zur Bestimmung von Deckschichtwiderständen an Zinküberzügen mittels gelartiger Elektrolyte T2 - GAV-Berichte N2 - Das Grundproblem der heute verfügbaren und normativ geregelten Prüfverfahren für Zinküberzüge besteht neben den realitätsfernen Prüfbedingungen vor allem in der subjektiv geprägten Auswertung der Prüfergebnisse. Die systematische Betrachtung der Entwicklungen der letzten Jahre zeigt, dass die üblichen Verfahren den aktuellen Anforderungen damit schon vom Ansatz her nicht gerecht werden können und auch die bisher betriebene, fortlaufende Variation und Anpassung von Prüfbedingungen keinen grundlegend neuen Lösungsansatz bieten können. Ein solcher ergibt sich nur, wenn die Zinküberzüge hinsichtlich der kinetischen Eigenschaften der Deckschichtbildung und -auflösung umfassend beschrieben werden können, was nur durch den Einsatz elektrochemischer Untersuchungsmethoden mittels Gelelektrolyten möglich ist. Aus diesem Grund wurde im Verbundforschungsvorhaben GELELEK auf der Basis elektrochemischer Methoden unter Verwendung eines Gelelektrolyten ein Normenvorschlag für eine Prüfnorm erarbeitet und zur Normungsreife geführt, welcher den Anforderungen an ein Messsystem für Feldanwendungen entspricht. Im Verbundforschungsvorhaben GELELEK wurde eine gezielte Kombination von Laboruntersuchungen mit Untersuchungen im Feld und Bauteilen unter realen Einsatzbedingungen angestrebt. Randbedingungen für eine gesicherte Messung von atmosphärisch bewitterten Zinküberzügen unter Einsatz von Gelelektrolyten wurden erarbeitet und im Normenvorschlag festgeschrieben. Darüber hinaus wurde ein mobiles Messgerät für Messungen mit Gelelektrolyten an realen Bauteilen entwickelt. Nach Abschluss des Forschungsvorhabens steht Industrievertretern und Prüfinstituten ein wissenschaftlich gesichertes Messverfahren basierend auf Kennwerten zur Verfügung, um Zinküberzüge und deren momentane Schutzwirkung unter praxisrelevanten Bedingungen einschätzen und normativ geregelt prüfen zu können. Der vorliegende Forschungsbericht gibt einen Überblick über die Motivation zur Durchführung des Forschungsvorhabens, wichtige Arbeitsschritte, Details zur entwickelten Prüfmethode sowie Einsatzmöglichkeiten für Prüfinstitute und Unternehmen. KW - Normung KW - Zink KW - Korrosion KW - Deckschichtbildung KW - Atmosphärische Korrosion KW - Korrosionsprüfung PY - 2022 UR - https://www.gav-verzinken.de/forschung/wissenspool SP - 1 EP - 24 AN - OPUS4-54947 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epperlein, Martin T1 - Eine digital gestützte Qualitätssicherung für die additive Fertigung N2 - Die additive Fertigung (ugs. „3D-Druck“) ist bei der Herstellung von hochkomplexen metallischen Bauteilen, bionisch inspiriertem Leichtbau oder Prototypen nicht mehr wegzudenken. Für die konventionelle Fertigung hat sich das bestehende System der Qualitätsinfrastruktur (QI) bewährt. Die additive Fertigung vergrößert den gestalterischen Spielraum von möglichen Bauteilgeometrien und Prozessfehlern jedoch erheblich. Hier gerät die QI an ihre Grenzen, sodass die Fertigung und Zulassung sicherheitsrelevanter Bauteile sehr zeit- und kostenintensive Versuche erfordern. Eine moderne digitale QI erlaubt eine effizientere Qualitätssicherung für additiv gefertigte Bauteile. Dies erfordert eine durchgängig digitale Abbildung des physischen Materialflusses. T2 - Werner-von-Siemens Centre for Industry and Science - AM Querschnittstreffen CY - Online meeting DA - 21.06.2022 KW - Additive Fertigung KW - Qualitätssicherung KW - Digitalisierung PY - 2022 AN - OPUS4-55127 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - New findings on the formation of corrosion product layers on zinc in the atmosphere N2 - The presentation shows systematic investigations to describe the corrosion and corrosion product formation processes of pure zinc under the climatic conditions currently prevailing in the Federal Republic of Germany. The investigations in their entirety aim at questioning current and establishing new ways of looking at the formation of corrosion products of pure zinc under atmospheric corrosion conditions. Thus, they make a significant contribution in understanding corrosion protection by zinc and zinc coatings. In particular, the focus is placed on the initial stage of the corrosion product formation. A systematic investigation of this time range, which is characterized by very reactive corrosion products, is only made possible by using gel-type electrolytes. The short periods of time at the beginning of weathering is now measurable and their influence on the formation of corrosion products and the kinetics of layer formation describable. By combining the new electrochemical approach with gravimetric, microscopic and analytical methods, new insights could be gained both on a methodic and scientific level. T2 - 26th International Galvanizing Conference and Exhibition CY - Rome, Italy DA - 20.06.2022 KW - Atmospheric Corrosion KW - Corrosion KW - Corrosion products KW - Gel-type electrolytes KW - Zinc PY - 2022 AN - OPUS4-55113 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thuy, Maximilian A1 - Pedragosa-Rincon, M. A1 - Niebergall, Ute A1 - Oehler, H. A1 - Alig, I. A1 - Böhning, Martin T1 - Environmental Stress Cracking of High-Density Polyethylene Applying Linear Elastic Fracture Mechanics JF - Polymers N2 - The crack propagation rate of environmental stress cracking was studied on high-density polyethylene compact tension specimens under static loading. Selected environmental liquids are distilled water, 2 wt% aqueous Arkopal N100 solution, and two model liquid mixtures, one based on solvents and one on detergents, representing stress cracking test liquids for commercial crop protection products. The different surface tensions and solubilities, which affect the energetic facilitation of void nucleation and craze development, are studied. Crack growth in surface-active media is strongly accelerated as the solvents induce plasticization, followed by strong blunting significantly retarding both crack initiation and crack propagation. The crack propagation rate for static load as a function of the stress intensity factor within all environments is found to follow the Paris–Erdogan law. Scanning electron micrographs of the fracture surface highlight more pronounced structures with both extensive degrees of plasticization and reduced crack propagation rate, addressing the distinct creep behavior of fibrils. Additionally, the limitations of linear elastic fracture mechanisms for visco-elastic polymers exposed to environmental liquids are discussed. KW - Crack propagation KW - Environmental stress cracking KW - Fracture toughness KW - Crop protection products KW - High-density polyethylene KW - Craze–crack mechanism KW - Linear elastic fracture mechanics KW - Stress intensity factor PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-550476 DO - https://doi.org/10.3390/polym14122415 SN - 2073-4360 VL - 14 IS - 12 SP - 1 EP - 21 PB - MDPI CY - Basel AN - OPUS4-55047 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Gödde, M. A1 - Salg, S. A1 - Erdt, René T1 - Self-ignition Behaviour of Bulk Materials: How Reliable is the Extrapolation of Laboratory Tests? T2 - Chemical Engineering Transactions N2 - The self-ignition behaviour of bulks is usually determined with the aid of isoperibolic or adiabatic hot storage tests; the sample volumes here are typically in the range of approx. 100 cm³ to several litres. The extrapolation to technically relevant volumes holds, however, considerable uncertainties. To reduce these uncertainties, a test stand was set up that allows to investigation sample sizes of up to 1000 dm³. These allow the study of selfignition behavior closer to the conditions that prevail in practice. The suitability (or unsuitability) of the established methods (including dangerous goods classification tests) were to be demonstrated and influencing variables that cannot be measured on a laboratory scale were to be determined. In addition, various analytical methods were used for the determination of reaction kinetic data of solid bulk materials and to predict the self-ignition behaviour of large storages. These are thermal analyses such as differential scanning calorimetry DSC, simultaneous thermal analysis STA as well as microcalorimetry for highprecision measurement of heat flows. Complete test series using all mentioned test methods will be presented for crosslinked polyvinyl-pyrrolidone (PVP) and conclusions regarding the applicability of the extrapolation methods will be discussed. Hot storage tests up to semi-industrial scale and their combination with various thermoanalytical methods allow a much more precise prediction of the self-ignition behaviour of large bulks. A further promising approach to estimate their heat release rates, and hence, the risk of self-ignition under technical conditions, is the use of microcalorimetric methods. T2 - Loss Prevention 2022 CY - Prag, Czechia DA - 05.06.2022 KW - Self-ignition KW - Kinetic data KW - Semi-technical tests KW - Thermoanalytical methods PY - 2022 SN - 978-88-95608-88-4 DO - https://doi.org/10.3303/CET2290049 SN - 2283-9216 VL - 90 SP - 289 EP - 294 PB - AIDIC AN - OPUS4-55079 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Erdt, René A1 - Gödde, M. A1 - Salg, S. T1 - Self-ignition Behaviour of Bulk Materials: How Reliable is the Extrapolation of Laboratory Tests? N2 - The self-ignition behaviour of bulks is usually determined with the aid of isoperibolic or adiabatic hot storage tests; the sample volumes here are typically in the range of approx. 100 cm³ to several litres. The extrapolation to technically relevant volumes holds, however, considerable uncertainties. To reduce these uncertainties, a test stand was set up that allows to investigation sample sizes of up to 1000 dm³. These allow the study of selfignition behavior closer to the conditions that prevail in practice. The suitability (or unsuitability) of the established methods (including dangerous goods classification tests) were to be demonstrated and influencing variables that cannot be measured on a laboratory scale were to be determined. In addition, various analytical methods were used for the determination of reaction kinetic data of solid bulk materials and to predict the self-ignition behaviour of large storages. These are thermal analyses such as differential scanning calorimetry DSC, simultaneous thermal analysis STA as well as microcalorimetry for highprecision measurement of heat flows. Complete test series using all mentioned test methods will be presented for crosslinked polyvinyl-pyrrolidone (PVP) and conclusions regarding the applicability of the extrapolation methods will be discussed. Hot storage tests up to semi-industrial scale and their combination with various thermoanalytical methods allow a much more precise prediction of the self-ignition behaviour of large bulks. A further promising approach to estimate their heat release rates, and hence, the risk of self-ignition under technical conditions, is the use of microcalorimetric methods. T2 - Loss Prevention 2022 CY - Prague, Czech Republic DA - 05.06.2022 KW - Self-ignition KW - Kinetic data KW - Semi-technical tests KW - Thermoanalytical methods PY - 2022 AN - OPUS4-55080 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Iro, M. A1 - Ingerle, D. A1 - Radtke, Martin A1 - de Oliveira Guilherme Buzanich, Ana A1 - Kregsamer, P. A1 - Streli, C. T1 - Investigation of polycapillary half lenses for quantitative confocal micro-X-ray fluorescence analysis JF - Journal of synchrotron radiation N2 - The use of polycapillary optics in confocal micro-X-ray fluorescence analysis (CMXRF) enables the destruction-free 3D investigation of the elemental composition of samples. The energy-dependent transmission properties, concerning intensity and spatial beam propagation of three polycapillary half lenses, which are vital for the quantitative interpretation of such CMXRF measurements, are investigated in a monochromatic confocal laboratory setup at the Atominstitut of TU Wien, and a synchrotron setup on the BAMline beamline at the BESSY II Synchrotron, Helmholtz-Zentrum-Berlin. The empirically established results, concerning the intensity of the transmitted beam, are compared with theoretical values calculated with the polycap software package and a newly presented analytical model for the transmission function. The resulting form of the newly modelled energy-dependent transmission function is shown to be in good agreement with Monte Carlo simulated results for the complete energy regime, as well as the empirically established results for the energy regime between 6 keV and 20 keV. An analysis of possible fabrication errors was conducted via pinhole scans showing only minor fabrication errors in two of the investigated polycapillary optics. The energy-dependent focal spot size of the primary polycapillary was investigated in the laboratory via the channel-wise evaluation of knife-edge scans. Experimental results are compared with data given by the manufacturer as well as geometric estimations for the minimal focal spot size. Again, the resulting measurement points show a trend in agreement with geometrically estimated results and manufacturer data. KW - BAMline KW - Synchrotron KW - Capillary KW - confocal PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-562430 DO - https://doi.org/10.1107/S1600577522009699 SN - 1600-5775 VL - 29 SP - 1376 EP - 1384 PB - International Union of Crystallography CY - Chester AN - OPUS4-56243 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de O. Primo, J. A1 - Horsth, D.F. A1 - de S. Correa, J. A1 - Das, A. A1 - Bittencourt, C. A1 - Umek, P. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Yusenko, Kirill A1 - Zanetta, C. A1 - Anaissi, F.J. T1 - Synthesis and Characterization of Ag/ZnO Nanoparticles for Bacteria Disinfection in Water JF - Nanomaterials N2 - n this study, two green synthesis routes were used for the synthesis of Ag/ZnO nanoparticles, using cassava starch as a simple and low-cost effective fuel and Aloe vera as a reducing and stabilizing agent. The Ag/ZnO nanoparticles were characterized and used for bacterial dis- infection of lake water contaminated with Escherichia coli (E. coli). Characterization indicated the formation of a face-centered cubic structure of metallic silver nanoparticles with no insertion of Ag into the ZnO hexagonal wurtzite structure. Physicochemical and bacteriological analyses described in “Standard Methods for the Examination of Water and Wastewater” were used to evaluate the efficiency of the treatment. In comparison to pure ZnO, the synthesized Ag/ZnO nanoparticles showed high efficiencies against Escherichia coli (E. coli) and general coliforms present in the lake water. These pathogens were absent after treatment using Ag/ZnO nanoparticles. The results indicate that Ag/ZnO nanoparticles synthesized via green chemistry are a promising candidate for the treatment of wastewaters contaminated by bacteria, due to their facile preparation, low-cost synthesis,and disinfection efficiency. KW - Synchrotron KW - BAMline PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-562440 DO - https://doi.org/10.3390/nano12101764 SN - 2079-4991 VL - 12 IS - 10 SP - 1 EP - 18 PB - MDPI CY - Basel AN - OPUS4-56244 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Cakir, Cafer Tufan T1 - Big to Small - Getting Smarter@BAMline N2 - In this talk an overview about artificial intelligence/machine learning applications @BAMline is given. In the first part, the use of neural networks for the quantification of XRF measurements and the decoding of coded-aperture measurements are shown. Then it is shown how Gaussian processes and Bayesian statistics can be used to achieve an optimal alignment of the set-up and in general for optimization of measurements. T2 - Forschungsseminar Institut für Optik und Atomare Physik TU Berlin CY - Berlin, Germany DA - 25.10.2022 KW - Artificial Inelligence KW - Machine Learning KW - Bayesian Statistics KW - Gaussian process KW - Neural network KW - BAMline KW - Synchrotron PY - 2022 AN - OPUS4-56249 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Cakir, Cafer Tufan A1 - de Oliveira Guilherme Buzanich, Ana T1 - Getting more efficient – The use of Bayesian optimization and Gaussian processes at the BAMline N2 - For more than 20 years, BAM is operating the BAMline at the synchrotron BESSY II in Berlin Adlershof. During this time, the complexity of the setup and the amount of data generated have multiplied. To increase the effectiveness and in preparation for BESSY III, algorithms from the field of machine learning are increasingly used. In this paper, several examples in the areas of beamline alignment and measurement time optimization based on Bayesian optimization (BO) with Gaussian processes (GP) are presented. BO is a method for finding the global optimum of a function using a probabilistic model represented by a GP. The advantage of this method is that it can handle high-dimensional problems, does not depend on the initial estimate, and also provides uncertainty estimates. After a short introduction to BO and GP, the first example is the automatic alignment of our double multilayer monochromator (DMM). To achieve optimal performance, up to three linear and two angular motor positions have to be optimized. To achieve this with a grid scan, at least 100^5 measurement points would be required. Assuming that all positions can be aligned independently, 100*5 points are still necessary. We show that with BO and GP less than 100 points are sufficient to achieve equal or better results. The second example is the optimization of measurement time in XRF scanning. Here we will show the advantage of the BO GP approach over point-by-point scanning. As can be seen in Fig. 1, the number of points required and thus the measurement time can be reduced by a factor of 50, while the loss in image quality is acceptable. The advantages and limitations of this approach will be discussed. T2 - European Conference on X-ray Spectrometry 2022 CY - Bruges, Belgium DA - 26.06.2022 KW - Artificial Inelligence KW - Machine Learning KW - Bayesian Statistics KW - Gaussian process KW - Neural network KW - BAMline KW - Synchrotron PY - 2022 AN - OPUS4-56251 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - From Egypt to Hiddensee – Analysis of Gold with Synchrotron Radiation IV N2 - Gold is one of the seven metals already known in antiquity and was used from time immemorial as a medium of exchange and for the production of jewelry because of its luster and rarity. In addition, it is easy to work and largely resistant to chemical influences. Investigations of gold using synchrotron radiation excited X-ray fluorescence analysis are non-destructive and provide information about the chemical elements present in the sample under investigation. The investigations presented here at BAMline focus on questions such as the origin, manufacturing process, and association of gold findings. The different questions are explained by a number of examples ranging from the Viking treasure from Hiddensee to the Nebra Sky Disk and finds from Egypt. The find from Bernstorf is discussed in detail. A Bayesian treatment of the authenticity is shown. T2 - Ringvorlesung Einführung in die Archäometrie CY - Berlin, Germany DA - 04.11.2022 KW - Synchrotron KW - BAMline KW - Bayesian Statistics KW - Gold KW - Röntgenfluoreszenz PY - 2022 AN - OPUS4-56252 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - News from the BAMline N2 - A presentation of recent measurements at the BAMline with focus on AI and ML applications T2 - Seminar: Strahlenphysikalische Anwendungen in Technik und Medizin CY - Vienna, Austria DA - 18.05.2022 KW - Synchrotron KW - BAMline KW - Bayesian Statistics KW - Gold KW - X-ray fluorescence PY - 2022 AN - OPUS4-56253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Cakir, Cafer Tufan A1 - de Oliveira Guilherme Buzanich, Ana T1 - Getting more efficient – The use of Bayesian optimization and Gaussian processes at the BAMline N2 - For more than 20 years, BAM is operating the BAMline at the synchrotron BESSY II in Berlin Adlershof. During this time, the complexity of the setup and the amount of data generated have multiplied. To increase the effectiveness and in preparation for BESSY III, algorithms from the field of machine learning are increasingly used. After a short introduction to BO and GP, the first example is the automatic alignment of our double multilayer monochromator (DMM). The second example is the optimization of measurement time in XRF scanning. T2 - SNI2022 conference CY - Berlin, Germany DA - 05.09.2022 KW - Artificial Inelligence KW - Machine Learning KW - Bayesian Statistics KW - Gaussian process KW - X-ray fluorescence KW - BAMline PY - 2022 AN - OPUS4-56255 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epperlein, Martin T1 - Eine digital gestützte Qualitätssicherung für die additive Fertigung N2 - Die Digitalisierung der Qualitätsinfrastruktur (QI) am Beispiel der Additiven Fertigung. Der Vortrag erörtert, wie die Elemente einer digitalen QI zur Qualitätssicherung und Zertifizierung in der Additiven Fertigung beitragen können. T2 - Treffen der Arbeitsgemeinschaft Additive Fertigung des VDMA CY - Coburg, Germany DA - 27.10.2022 KW - Qualitätsinfrastruktur KW - Additive Fertigung KW - Digitalisierung PY - 2022 AN - OPUS4-56165 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Valet, Svenja A1 - Kotula, Stefan A1 - Burkert, Andreas T1 - Vorstellung des WIPANOVerbundforschungsvorhabens GELELEK: Forschungsziele und Ergebnisse N2 - Der Vortrag stellt das WIPANO-Forschungsvorhaben GELELEK vor und fasst die wichtigsten erzielten Ergebnisse zusammen. T2 - Sitzung des GfKORR Arbeitskreises „Korrosion und Korrosionsschutz von Eisen und Stahl“ CY - Online meeting DA - 08.12.2022 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosionsuntersuchungen KW - Normung KW - Ringversuch KW - WIPANO KW - Zink KW - Korrosion PY - 2022 AN - OPUS4-56502 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Gleim, Tobias A1 - Gradt, Thomas T1 - Friction coefficients for wood-wood and wood-steel contacts N2 - The friction at the interfaces between pieces of wood and steel is of crucial importance for the impact and energy absorption in impact limiters of transport casks for radioactive material. Here, the friction coefficient for the combinations wood-wood and wood-steel was measured in the temperature range between -40°C and 90°C. Results show decreasing friction with increasing temperature, ranging from 0.43 at -40°C to 0.22 for 90°C for wood-steel combinations and from 0.3 at -40°C to 0.24 at 90°C for a wood-wood combination. T2 - Sandia-BAM Workshop CY - Berlin, Germany DA - 21.11.2022 KW - Wood KW - Friction KW - Transport cask PY - 2022 AN - OPUS4-56342 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gröke, Carsten A1 - Neumann, Martin A1 - Komann, Steffen A1 - Wille, Frank T1 - Anforderungen an die Bauartprüfung und Maßnahmen zur Qualitätssicherung für nicht zulassungspflichtige Versandstücke T2 - Kontec 2019 Tagungsband - Proceedings N2 - Überblick über die Regelwerksanforderungen an die Bauarten von nicht zulassungspflichtigen Versandstücken, sowie die zu erfüllenden Maßnahmen zur Qualitätssicherung für die Auslegung, die Herstellung und den Betrieb. T2 - KONTEC 2019 CY - Dresden, Germany DA - 27.03.2019 KW - Radioaktiv KW - Beförderung KW - IP-2 KW - IP-3 KW - Typ A KW - Anerkennung KW - Bauartprüfung PY - 2019 SP - 136 EP - 142 AN - OPUS4-56343 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Stainless steels: Fundamentals and causes for corrosion defects N2 - The presentation gives an overview about the fundamentals on stainless steels. The mechanism of passive layer formation is explained and strategies for securing corrosion protection are given. The influence of a grinding process on corrosion resistance is discussed. T2 - Tech-Day Mettler Toledo CY - Online meeting DA - 23.11.2022 KW - Corrosion KW - Stainless steel KW - Grinding KW - KorroPad KW - Surface PY - 2022 AN - OPUS4-56370 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epperlein, Martin A1 - Poka, Konstantin A1 - Hilgenberg, Kai T1 - QI-Digital - Qualitätssicherung für die Additive Fertigung N2 - Für die konventionelle Fertigung hat sich das bestehende System der Qualitätsinfrastruktur (QI) bewährt. Die additive Fertigung vergrößert den gestalterischen Spielraum von möglichen Bauteilgeometrien und Prozessfehlern jedoch erheblich. Hier gerät die QI an ihre Grenzen, sodass die Fertigung und Zulassung sicherheits-relevanter Bauteile sehr zeit- und kostenintensive Versuche erfordern. Eine moderne digitale QI erlaubt eine effizientere Qualitätssicherung für additiv gefertigte Bauteile. Dies erfordert eine durchgängig digitale Abbildung des physischen Materialflusses. T2 - QI-Forum CY - Berlin, Germany DA - 11.10.2022 KW - Additive Fertigung KW - Qualitätssicherung KW - Digitalisierung PY - 2022 AN - OPUS4-56382 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epperlein, Martin T1 - Digitalisierung der Qualitätsinfrastruktur am Beispiel der Additiven Fertigung N2 - Die Digitalisierung der Qualitätsinfrastruktur (QI) am Beispiel der Additiven Fertigung. Der Vortrag erörtert, wie man mit Elementen einer digitalen QI (DPP, DCoC, Smart Standard, DCC, etc.) aktuelle Herausforderungen in der Qualitätssicherung additiv gefertigter Bauteile adressieren kann. T2 - FORUM Qualitätssicherung in der additiven Fertigung – Quality Engineering CY - Online meeting DA - 13.09.2022 KW - Additive Fertigung KW - Qualitätssicherung KW - Digitalisierung KW - Qualitätsinfrastruktur PY - 2022 AN - OPUS4-56383 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Kulow, A. A1 - Reinholz, Uwe A1 - de Oliveira Guilherme Buzanich, Ana A1 - Emmerling, Franziska A1 - Streli, C. A1 - Fittschen, U. E. A. A1 - Hampel, S. T1 - Energy Resolved Imaging with Coded Apertures N2 - Our aim is to develop a simple and inexpensive method for full field X-ray fluorescence imaging.We combine an energydispersive array detector with a coded aperture to obtain high resolut ion images. To obtain the information from the recorded image a reconstruction step is necessary. The reconstruction methods we have developed, were tested on simulated data and then applied to experimental data. The first tests were carried out at the BAMline @BESSY II. This method enables the simultaneous detection of multiple elements,which is important e.g. in the field of catalysis. T2 - SRI 2021 CY - Online meeting DA - 28.3.2022 KW - Synchrotron KW - BAMline KW - Machine Learning KW - Coded Aperture PY - 2022 AN - OPUS4-56298 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kulow, Anicó A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe A1 - Emmerling, Franziska A1 - Hampel, S. A1 - Fittschen, UEA A1 - Streli, C. A1 - Radtke, Martin T1 - Reconstruction for coded aperture full-field x-ray fluorescence imaging JF - Advances in x-ray analysis N2 - X-ray fluorescence imaging is a well-established tool in materials characterization. In this work, we present the adaption of coded aperture imaging to full-field X-ray fluorescence imaging at the synchrotron. Coded aperture imaging has its origins in astrophysics, and has several advantages: Coded apertures are relatively easy to fabricate, achromatic, allow a high photon throughput, and high angular acceptance. Coded aperture imaging is a two-step-process, consisting of the measurement process and a reconstruction step. Different programs have been written, for the raytracing/forward projection and the reconstruction. Experiments with coded aperture in combination with a Color X-ray Camera and an energy-dispersive area detector, have been conducted at the BAMline. Measured samples were successfully reconstructed, and gave a 9.1-fold increase in count rate compared to a polycapillary optic. KW - Synchrotron KW - BAMline KW - Coded Aperture PY - 2022 SN - 1097-0002 VL - 65 SP - 57 EP - 70 PB - Cambridge University Press CY - Cambridge AN - OPUS4-56350 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Field exposure study under sheltered and open exposure conditions at different test sites in Germany: First‐year corrosion rate and atmospheric corrosivity JF - Materials and Corrosion N2 - The corrosivity of atmospheres in Europe has changed significantly in recent decades. For the Federal Republic of Germany, no current values for the corrosion rate based on 1‐year atmospheric exposure of standard specimens can be found in the scientific literature after 2000. This paper presents results from a field exposure study in the Berlin metropolitan area and Helgoland in 2016. Based on standard specimens, values for the corrosion rate and the corresponding atmospheric corrosivity category are determined for open exposure and indirect weathering in a ventilated enclosure as sheltering after 1 year of exposure. The results prove that determined corrosivity categories are material‐specific. Sheltered exposure is a typical atmospheric situation for many building components. It allows statements on the effect of the concentration of airborne substances on the corrosivity beyond the normative requirements. KW - Atmospheric corrosion KW - Corrosivity category KW - ISO 9223 KW - Mass loss KW - Atmosphärische Korrosion PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-565099 DO - https://doi.org/10.1002/maco.202213582 SN - 0947-5117 (print) SN - 1521-4176 (online) SP - 1 EP - 15 PB - Wiley-VCH GmbH CY - Weinheim AN - OPUS4-56509 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schönhals, Andreas A1 - Böhning, Martin A1 - Szymoniak, Paulina ED - Schönhals, Andreas ED - Szymoniak, Paulina T1 - (Nano)Composite Materials—An Introduction T2 - Dynamics of Coposite Materials N2 - The chapter gives a brief introduction to (nano)compositecomposite materials having the focus on polymer-based nanocomposites. The different dimensionalities of nanoparticles are introduced, along with their distribution in the matrix. Different application fields of polymer-based nanocomposites, like flame retardancy, filled rubbers, nanofilled thermosets and thermoplastics, separation membranes and nanodielectrics, are considered in greater detail. KW - Polymer-based nanocomposites KW - Nanoparticle KW - Distribution of nanoparticles KW - Filled rubbers KW - Filled thermosets and plastics KW - Separation membranes KW - Nanodielectrics PY - 2022 DO - https://doi.org/10.1007/978-3-030-89723-9_1 SP - 1 EP - 31 PB - Springer CY - Cham, Switzerland AN - OPUS4-54565 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Haacke, Nasrin T1 - Forschungsprojekt RUNOFF: "Neubewertung der Dauerhaftigkeit von Dach- und Fassadenmaterialien und des Eintrags von Schwermetall-Ionen in die Umwelt hervorgerufen durch Runoff„ N2 - Bei Betrachtungen zur Lebensdauer von Metallbauteilen im Bauwesen müssen Korrosions- und Runoff-Vorgänge an der Atmosphäre als verschiedene Reaktionen unterschieden werden. Korrosion ist der Prozess, der von elektrochemischen Reaktionen an der Grenzfläche Metall/Patina kontrolliert wird. Runoff dagegen wird durch chemische Reaktionen an der Grenzfläche Patina/Atmosphäre begünstigt. Mit zunehmender Bewitterungszeit nimmt die Korrosionsgeschwindigkeit stetig ab, während postuliert wird, dass die Geschwindigkeit des Runoffs über die gesamte Zeit konstant bleibt. Dieses Verhalten des Runoffs muss aber zunehmend bezweifelt werden. Die Gesamtmenge an abgezehrtem Metall beinhaltet zwei Bestandteile. Ein Teil wird in die Schicht aus Korrosionsprodukten eingebaut, der andere wird aufgrund von Niederschlägen aus der Patina gelöst. Aus diesem Grund ist die Menge an Zink-Runoff stark abhängig von den Eigenschaften der Korrosionsprodukt- bzw. Patinaschicht und nicht anhand der Zusammensetzung des Metalls abschätzbar. Vorhandene Modelle können die Menge an Runoff, und damit verbunden die Abzehrung einer Schicht aus Zink und Kupfer, sowie den resultierenden Eintrag von Schwermetallionen in die Umwelt nicht mehr darstellen und erklären. Um den Korrosionsschutz an Bauwerken zum einen dauerhaft unter Beachtung von Kostenaspekten und Ressourcenschonung und zum anderen unter ökologischen Gesichtspunkten auslegen zu können, müssen deshalb neue wissenschaftliche Grundlagen erarbeitet und die Mechanismen beschrieben werden. Das BAM-Forschungsvorhaben RUNOFF widmet sich den Fragestellungen. Der Vortrag gibt einen kurzen Überblick zum Forschungsvorhaben. T2 - 19. Projektetage der Bauforschung CY - Online meeting DA - 22.03.2022 KW - Runoff KW - Zink KW - Korrosion KW - Kupfer PY - 2022 AN - OPUS4-54580 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zorn, R. A1 - Szymoniak, Paulina A1 - Kolmangadi, Mohamed Aejaz A1 - Malpass-Evans, R. A1 - McKeown, N. A1 - Tyagi, M. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Low frequency vibrations and diffusion in disordered polymers bearing an intrinsic microporosity as revealed by neutron scattering JF - Crystals N2 - The microscopic diffusion and the low frequency density of states (VDOS) of PIM-EATB(CH3) are investigated by inelastic and quasi-elastic neutron scattering where also the demethylated counterpart of PIM-EA-TB(H2) is considered. These intrinsic microporous polymers are characterized by large BET surface area values of several hundred m2/g and pore sizes between 0.5 and 2 nm. Detailed comparison is made to the archetype of polymers of intrinsic microporosity, PIM-1, and polynorbornenes also bearing a microporosity. Due to the wavelength of neutrons, the diffusion and vibrations can be addressed on microscopic length and time scales. From the inelastic neutron scattering experiments the low frequency density of states (VDOS) is estimated which shows excess contributions to the Debye-type VDOS known as Boson peak. It was found that the maximum frequency of the Boson peak decreases with increasing microporosity characterized by the BET surface area. However, besides the BET surface area, additional factors such as the backbone stiffness govern the maximum frequency of the Boson peak. Further the mean squared displacement related to microscopic motions was estimated from elastic fixed window scans. At temperatures above 175 K, the mean squared displacement PIM-EA-TB(CH3) is higher than that for the demethylated counterpart PIM-EA-TB(H2). The additional contribution found for PIM-EATB(CH3) is ascribed to the rotation of the methyl group in this polymer because the only difference between the two structures is that PIM-EA-TB(CH3) has methyl groups where PIM-EA-TB(H2) has none. A detailed comparison of the molecular dynamics is also made to that of PIM-1 and the microporous polynorbornene PTCNSi1. The manuscript focuses on the importance of vibrations and the localized molecular mobility characterized by the microscopic diffusion on the gas Transport in polymeric separation membranes. In the frame of the random gate model localized fluctuations can open or close bottlenecks between pores to enable the diffusion of gas molecules. KW - Polymer of intrisic microporosity KW - Neutron scattering KW - Boson peak KW - Methyl group rotation PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-538490 DO - https://doi.org/10.3390/cryst11121482 VL - 11 IS - 12 SP - 1 EP - 16 PB - MDPI CY - Basel AN - OPUS4-53849 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kolmangadi, Mohamed Aejaz A1 - Szymoniak, Paulina A1 - Zorn, R. A1 - Böhning, Martin A1 - Wolff, M. A1 - Zamponi, M. A1 - Schönhals, Andreas T1 - Molecular mobility in high-performance polynorbornenes:A combined broadband dielectric, advanced calorimetry,and neutron scattering investigation JF - Polymer Engineering and Science N2 - The molecular dynamics of two addition type polynorbornenes, exo-PNBSiand PTCNSi1, bearing microporosity has been investigated by broadbanddielectric spectroscopy, fast scanning calorimetry, and neutron scattering. Bothpolymers have the same side groups but different backbones. Due to theirfavorable transport properties, these polymers have potential applications inseparation membranes for gases. It is established in literature that molecularfluctuations are important for the diffusion of small molecules through poly-mers. For exo-PNBSi, two dielectric processes are observed, which are assignedto Maxwell/Wagner/Sillars (MWS) process due to blocking of charge carriersat internal voids or pore walls. For PTCNSi1, one MWS-polarization process isfound. This points to a bimodal pore-size distribution for exo-PNBSi. A glasstransition for exo-PNBSi and for PTCNSi1 could be evidenced for the first timeusing fast scanning calorimetry. For Tgand the corresponding apparent activa-tion energy, higher values were found for PTCNSi1 compared to exo-PNBSi.For both polymers, the neutron scattering data reveal one relaxation process.This process is mainly assigned to methyl group rotation probably overlayedby carbon–carbon torsional fluctuations. KW - Advanced calorimetry KW - Dielectric spectroscopy KW - Neutron scattering KW - Polynorbornenes PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-547086 DO - https://doi.org/10.1002/pen.25995 SN - 0032-3888 VL - 62 IS - 7 SP - 2143 EP - 2155 PB - Wiley AN - OPUS4-54708 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - C. Pardo Pérez, L. A1 - Arndt, A. A1 - Stojkovikj, S. A1 - Y. Ahmet, I. A1 - T. Arens,, J. A1 - Dattila, F. A1 - Wendt, R. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Davies, V. A1 - Höflich, K. A1 - Köhnen, E. A1 - Tockhorn, P. A1 - Golnak, R. A1 - Xiao, J. A1 - Schuck, G. A1 - Wollgarten, M. A1 - López, N. A1 - T. Mayer, M. T1 - Determining Structure-Activity Relationships in Oxide Derived CuSn Catalysts During CO2 Electroreduction Using X-Ray Spectroscopy JF - Advanced Energy Materials N2 - The development of earth-abundant catalysts for selective electrochemical CO2 conversion is a central challenge. Cu-Sn bimetallic catalysts can yield selective CO2 reduction toward either CO or formate. This study presents oxide-derived Cu-Sn catalysts tunable for either product and seeks to understand the synergetic effects between Cu and Sn causing these selectivity trends. The materials undergo significant transformations under CO2 reduction conditions, and their dynamic bulk and surface structures are revealed by correlating observations from multiple methods—X-ray absorption spectroscopy for in situ study, and quasi in situ X-ray photoelectron spectroscopy for surface sensitivity. For both types of catalysts, Cu transforms to metallic Cu0 under reaction conditions. However, the Sn speciation and content differ significantly between the catalyst types: the CO-selective catalysts exhibit a surface Sn content of 13 at. % predominantly present as oxidized Sn, while the formate-selective catalysts display an Sn content of ≈70 at. % consisting of both metallic Sn0 and Sn oxide species. Density functional theory simulations suggest that Snδ+ sites weaken CO adsorption, thereby enhancing CO selectivity, while Sn0 sites hinder H adsorption and promote formate production. This study reveals the complex dependence of catalyst structure, composition, and speciation with electrochemical bias in bimetallic Cu catalysts. KW - Electrochemical CO2 conversion KW - Cu catalysts KW - X-ray absorption spectroscopy PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-547116 DO - https://doi.org/10.1002/aenm.202103328 SN - 1614-6832 VL - 12 IS - 5 SP - 2103328 PB - Wiley-VCH GmbH AN - OPUS4-54711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, Dejian A1 - Tan, X. A1 - Wei, A. A1 - Duan, Q. A1 - Huang, W. A1 - Schmidt, Martin T1 - Ignition temperature and mechanism of carbonaceous dust clouds: The roles of volatile matter, CH4 addition, O2 mole fraction and diluent gas JF - Journal of hazardous materials N2 - Minimum ignition temperature of dust clouds (MITC) was studied experimentally and theoretically in different atmospheres. Three carbonaceous dusts were tested in both air and O2/CO2 atmospheres with CH4 mole fraction from 0 to 2%. Results showed that the ignition risk of the three dusts significantly increases (decrease of MITC by ~100 ℃) with increasing XO2 from 21% to 50%, but significantly decreases replacing N2 in air with CO2. The inhibition effect of CO2 on MITCs could be diminished by increasing XO2 or adding CH4. The addition of small amount of CH4 has different effects on the MITCs of different dust samples, following the opposite order of volatile matter content: anthracite>bituminous coal>starch. Two modified steady-state ignition models, considering the density of mixture gas and dust cloud, XO2 and its diffusivity, were developed to interpret the experimental observations. The analysis revealed that the global heterogeneous ignition model suits well for the hybrid mixtures of anthracite or bituminous coal dusts. In contrast, the proposed global homogeneous ignition model was found to be only valid for the pure starch dust, and the extra CH4 addition could strongly affect the ignition process of starch, particularly in O2/CO2 atmospheres with higher XO2. KW - Dust explosions KW - Gas explosions KW - Minimum ignition temperature KW - Hybrid mixtures PY - 2021 DO - https://doi.org/10.1016/j.jhazmat.2020.124189 SN - 0304-3894 SN - 1873-3336 VL - 405 SP - 1 EP - 10 PB - Elsevier CY - Amsterdam AN - OPUS4-53838 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gruskovà, J. A1 - Martin, G. A1 - Kresten, O. A1 - Mitthoff, F. A1 - Kaska, K. A1 - Hofmann, C. A1 - Kreuzer, W. A1 - Phelps, M. A1 - Boydston, K. A1 - Easton Jr., R. L. A1 - Knox, K. T. A1 - Kelbe, D. A1 - Kasotakis, D. A1 - Christens-Barry, W. A. A1 - Stewart, D. A1 - Rabin, Ira A1 - Hahn, Oliver A1 - Glaser, L. A1 - Garrevoet, J. A1 - Shevchuk, I. A1 - Klumpp, S. A1 - Deckers, D. A1 - Buck, J. ED - Cronier, M. ED - Mondrain, B. T1 - Insights-into-the-Digital-Recovery-of-the-Scythica-Vindobonesia T2 - Collège de France – CNRS Centre de recherche d'histoire et civilisation de Byzance N2 - The Scythica Vindobonensia, the new fragments on Gothic incursions into Roman provinces in the Balkans in the middle of the third century AD that were revealed some years ago in a Greek palimpsest at the Austrian National Library in Vienna (ÖNB), are commonly considered as one of the most important additions of the last decades to the corpus of texts from classical Antiquity. Tere is a high degree of confdence among scholars in supposing that the fragments come from the lost work Scythica written in Greek by the third-century historian P. Herennius Dexippus (Δέξιππος) of Athens. The new fragments have hence also been called Dexippus Vindobonensis. In his Scythica, Dexippus recorded wars of the Romans with the Goths (and other tribes) whom he called Scythians. The work had been hitherto known only from excerpts and quotes by later authors. Eight pages of a Byzantine manuscript copy of the ancient text have survived hidden underneath the visible surface of the last four parchment folios of the Vienna manuscript Historicus graecus 73, f. 192r -195v4. The copy is written in a Greek calligraphic minuscule which has been estimated by palaeographers to be of the middle or the second half of the eleventh century. In the thirteenth century, the text (on each of the eight pages arranged in one column, with 30 lines per page) was washed of the parchment and the valuable material made from animal skin was re-used for Christian texts. The new writing largely covered the faded remnants of the original text. It thus became hidden from the human eye for more than seven hundred years. Its discovery by Jana Grusková, a classical philologist specialized in the transmission of Greek texts, resulted from a systematic review of all Greek palimpsests kept at the Austrian National Library in Vienna at the beginning of the twenty-first century and a detailed examination of the four folios in 2007-20097. KW - Scythica Vindobonensia, KW - Gothic incursions KW - A Greek palimpsest KW - Antiquity KW - Byzantine manuscript KW - Vienna manuscript PY - 2020 SN - 978-2-916716-81-7 SN - 0577-1471 VL - 2020 IS - 24/1 SP - 945 EP - 967 PB - Association des Amis du Centre d’Histoire et Civilisation de Byzance CY - Paris ET - 1 AN - OPUS4-53843 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Update nach 10 Jahren Bewitterung - Langzeitkorrosionsverhalten nichtrostender Stähle in maritimer Atmosphäre N2 - Durch Fortführung der Untersuchungen aus einem Forschungsvorhaben wurden neun verschiedene Stahllegierungen unter maritimen Umgebungsbedingungen über zehn Jahre ausgelagert und deren Korrosionsverhalten untereinander verglichen und bewertet. Anhand der Ergebnisse der Auslagerungsprüfungen konnten Rückschlüsse auf die Einflüsse der Legierungszusammensetzung, der Oberfächenausführung und der Auslagerungszeit unter maritimen Auslagerungsbedingungen gewonnen werden. Die Proben der drei untersuchten Duplexwerkstoffe zeigten über den Auslagerungszeitraum von zehn Jahren sowohl mit als auch ohne Spaltgeometrie die beste Korrosionsbeständigkeit. Ebenso konnte der molybdänlegierte Ferrit 1.4521 eine vergleichbar gute Korrosonsbeständigkeit erzielen, wie die klassischen austenitischen Werkstoffe 1.4301 und 1.4404. T2 - Korrosionsschutz in der maritimen Technik 2022 CY - Online meeting DA - 27.01.2022 KW - Auslagerungsversuche KW - Korrosionsschutz KW - Korrosion KW - Nichtrostende Stähle PY - 2022 AN - OPUS4-54276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kolmangadi, Mohamed Aejaz A1 - Szymoniak, Paulina A1 - Smales, Glen Jacob A1 - Bermeshev, M. A1 - Schönhals, Andreas A1 - Böhning, Martin T1 - Molecular mobility of polynorbornenes with trimethylsiloxysilyl side groups: Influence of the polymerization mechanism JF - Journal of membrane science and research N2 - We report dielectric and calorimetric studies on metathesis and addition-type polytricyclononenes, both based on the same monomer bearing three pendant OSiMe3 groups. For the addition-type polymer, dielectric spectroscopy reveals a β*-process related to the microporosity, whereas for its metathesis counterpart, the segmental dynamics manifests as an α-process related to a glass transition. Besides active dielectric processes, a significant conductivity contribution is detected for both samples which for the microporous additiontype polymer is three orders of magnitude greater than for the metathesis polymer. The broadband dielectric spectroscopy is complemented by detailed calorimetric investigations, comprising DSC, FSC, and TMDSC. The calorimetric methods detected the glass transition for the metathesis polymer in agreement with the observed dielectric α-process. Furthermore, the already reported gas transport properties for both polymers are compared, setting them in correlation with the observed molecular mobility and conductivity behavior. The discussed results reflect significant differences in molecular mobility of the two polymers affecting the appearance of microporosity which strongly determines the gas transport properties. KW - Microporous polymers KW - Molecular mobility KW - Electrical conductivity KW - Membrane polymers KW - Gas separation PY - 2022 DO - https://doi.org/10.22079/JMSR.2021.538060.1495 SN - 2476-5406 VL - 8 IS - 3 SP - 1 EP - 9 PB - Membrane Processes Research Laboratory (MPRL) CY - Tehran AN - OPUS4-54303 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babutzka, Martin A1 - Grabowski, Sven A1 - Sahrhage, H. A1 - Lampke, T. T1 - Electrochemical corrosion investigations on binary and ternary zinc alloy coatings using gel electrolytes JF - Advanced engineering materials N2 - Novel agar-based test electrolytes are used to perform electrochemical corrosion investigations on ZnFe and ZnNi binary as well as ZnFeMo ternary zinc coatings. The objectives of the electrochemical investigations include the characterization of the corrosion behavior, the description of the protective effect of the coatings as well as the investigation of the layer formation and degradation under artificial aging. ZnFe and ZnFeMo coatings are applied with varying iron content as well as an additional passivation layer, respectively, to study the effect on corrosion resistance. The results show that the protective effect of the coatings is not negatively influenced by different iron contents or the addition of molybdenum. Additional passivation of the ZnFe-containing coatings by means of a passivating agent leads to a significant improvement in the protective effect. Artificial aging leads to slight degradation of the additional passivation layer whereas coatings without post-treatment enhance their protective effect by the formation of corrosion product layers. KW - Binary zinc alloys KW - Ternary zinc alloys KW - Corrosion testing KW - Gel electrolytes KW - Corrosion PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-543013 DO - https://doi.org/10.1002/adem.202101336 SN - 1438-1656 SP - 1 EP - 14 PB - Wiley-VCH CY - Weinheim AN - OPUS4-54301 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Yusenko, Kirill A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin T1 - Studies of high-entropy alloys using x-ray absorption fine structure at the bamline N2 - BAM line is multipurpose high-energy beamline. To extend studies of multicomponent alloys using EXAFS we perform own research and user experiments requiring multiedge spectroscopy, high-temperature and chemically aggressive sample environments. Our study of multicomponent alloys and high-entropy alloys open new perspectives in understanding their reactivity, corrosion, phase transformations and local ordering. T2 - SPP2006: large scale facilities CY - Online meeting DA - 02.11.2021 KW - Synchrotron studies KW - High-entropy alloys KW - EXAFS PY - 2021 AN - OPUS4-54016 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Zekhnini, Khalid T1 - BAM-Meerwassercontainer – Konzept und zukünftige Forschungsideen N2 - Dieser Vortrag gibt einen Einblick in das Konzept und den Aufbau des BAM-Meerwassercontainers. Es werden Ergebnisse aus laufenden Messreihen gezeigt. T2 - Sitzung der DECHEMA/GfKORR-Fachgruppe "Mikrobielle Materialzerstörung und Materialschutz" CY - Online meeting DA - 10.11.2021 KW - Korrosionsprüfung KW - Kathodischer Korrosionsschutz KW - Mariner Bewuchs PY - 2021 AN - OPUS4-53730 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Valet, Svenja A1 - Kotula, Stefan A1 - Burkert, Andreas T1 - Vorstellung des WIPANOVerbundforschungsvorhabens GELELEK: Forschungsziele und Ergebnisse N2 - Der Vortrag stellt das WIPANOForschungsvorhaben GELELEK vor und fasst die wichtigsten erzielten Ergebnisse zusammen. T2 - 13. Sitzung des GfKORR Arbeitskreises „Korrosionsuntersuchung und -überwachung“ CY - Online meeting DA - 08.12.2021 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosionsuntersuchungen KW - Normung KW - Ringversuch KW - Zink KW - WIPANO PY - 2021 AN - OPUS4-53946 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zhao, P. A1 - Schmidt, Martin A1 - Krause, U. A1 - Duan, Q. A1 - Krietsch, Arne A1 - Wu, Dejian T1 - Experimental study on the minimum explosion concentration of anthracite dust: The roles of O2 mole fraction, inert gas and CH4 addition JF - Jounal of Loss Prevention in the Process Industries N2 - The explosion characteristics of anthracite coal dust with/without small amount of CH4 (1.14 vol %) were investigated by using a 20 L spherical explosion apparatus with an emphasis on the roles of oxygen mole fraction and inert gas. Two methods based on overpressure and combustion duration time were used to determine the minimum explosion concentration (MEC) or the lower explosion limit (LEL) of the pure anthracite coal dust and the hybrid coal-methane mixtures, respectively. The experiment results showed that increasing oxygen mole fraction increases the explosion risk of coal dust: with increasing oxygen mole fraction, the explosion pressure (Pex) and the rate of explosion pressure rise ((dp/dt)ex)) increase, while MEC decreases. The explosion risk of anthracite dust was found to be lower after replacing N2 with CO2, suggesting that CO2 has a better inhibition effect on explosion mainly due to its higher specific heat. However, the addition of 1.14% CH4 moderates the inhibition effect of CO2 and the promotion effect of O2 on anthracite dust explosion for some extent, increasing explosion severity and reducing the MEC of anthracite dust. For hybrid anthracite/CH4 mixture explosions, Barknecht’s curve was found to be more accurate and conservative than Chatelier’s line, but neither are sufficient from the safety considerations. The experimental results provide a certain help for the explosion prevention and suppression in carbonaceous dust industries. KW - Lower explosion limit KW - Minimun explosion concentration KW - Explosion charasteristics KW - Hybrid mixture KW - Explosion regimes PY - 2021 DO - https://doi.org/10.1016/j.jlp.2021.104490 VL - 2021 SP - 1 EP - 10 PB - Elsevier Ltd. ET - 71 AN - OPUS4-54074 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - ML@BAMLINE N2 - An overview of the machine learning methods used at BAMline. Examples of automatic alignment and optimisation based on Gaussian processes are discussed. Quantification of XRF measurements and reconstruction for coded aperture imaging based on neural networks are also presented. T2 - Machine Learning Workshop BAM CY - Online meeting DA - 18.03.2021 KW - Artificial Intelligence KW - Machine learning KW - Bayesian Optimization KW - Gaussian process KW - Neural Network PY - 2021 AN - OPUS4-54142 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lutz, C. A1 - Hampel, S. A1 - Beuermann, S. A1 - Turek, T. A1 - Kunz, U. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Fittschen, U. E. A. T1 - Investigation on Vanadium Species Distribution in Nafion™ 117 after Cyclization in a Vanadium Redox Flow Battery JF - Advances in X-Ray Analysis N2 - The vanadium redox flow battery (VRFB) is currently a potential candidate for stationary energy storage. A major challenge is the unintended vanadium transport through the separator, which results in a fade of capacity. To overcome this issue, it is necessary to understand the transport processes in the membrane on a more fundamental level. In this work, the vanadium species distribution in Nafion™ 117 after cyclization was investigated. Two membranes, one from a charged VRFB and another from a discharged VRFB, were analyzed using ultraviolet–visible spectroscopy (UV/VIS) and X-ray absorption near edge structure spectroscopy (XANES). Little difference between the two membranes was recognizable according to the UV/VIS results. In comparison, the XANES results showed that the membrane from the charged VRFB contains more V3+ than VO2+, whereas for the discharged case, more VO2+ is present in the membrane. KW - Synchrotron KW - BAMline KW - XANES KW - Vanadium redox flow battery PY - 2021 VL - 64 SP - 1 EP - 8 AN - OPUS4-54144 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe T1 - Das goldene Zeitalter war damals Analyse von Gold mit Synchrotronstrahlung N2 - Gold ist eines der sieben bereits in der Antike bekannten Metalle und wurde wegen seines Glanzes und seiner Seltenheit seit jeher als Tauschmittel und zur Herstellung von Schmuck verwendet. Außerdem ist es leicht zu bearbeiten und weitgehend resistent gegen chemische Einflüsse. Die Analyse von Gold mit der durch Synchrotronstrahlung angeregten Röntgenfluoreszenzanalyse ist zerstörungsfrei und liefert Informationen über die in der untersuchten Probe vorhandenen chemischen Elemente. Im Mittelpunkt der hier vorgestellten Untersuchungen an der BAMline stehen Fragen nach der Herkunft, dem Herstellungsprozess und der Zugehörigkeit von Goldfunden. Die verschiedenen Fragestellungen werden anhand einer Reihe von Beispielen erläutert, die vom Wikingerschatz von Hiddensee über die Himmelsscheibe von Nebra bis hin zu Funden aus Ägypten reichen. Darüber hinaus werden die heute am Synchrotron verfügbaren modernen Messmethoden vorgestellt. T2 - WISSENSCHAFT MIT WIRKUNG: Workshop Kulturguterhaltung – vom Dampfkessel zu Nanomaterialien CY - Berlin, Germany DA - 17.11.2021 KW - Gold KW - Synchrotron KW - Bernstorf KW - Nebra KW - XRF PY - 2021 AN - OPUS4-54139 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Machine learning for direct quantification of XRF measurements N2 - In this talk I’ll describe the use of artificial neural networks (ANN) for quantifying X-ray fluorescence (XRF) measurements. The main idea of this talk is to give an overview of the process needed to generate a model that can then be applied to a specific problem. In XRF, a sample is excited with X-rays and the resulting characteristic radiation is detected to determine elements quantitatively and qualitatively. This is traditionally done in several time-consuming steps. I’ll show the possibilities and problems of using a neural network to realise a "one-click" quantification. This includes generating training data using Monte Carlo simulation and augmenting the existing data set with an ANN to generate more data. The search for the optimal hyperparameters, manually and automatically, is also described. For the case presented, we were able to train a network with a mean absolute error of 0.1% by weight for the synthetic data and 0.7% by weight for a set of experimental data obtained with certified reference materials. T2 - Seminar series: Artificial Intelligence applied to X-ray / synchrotron techniques CY - Online meeting DA - 24.06.2021 KW - Artificial intelligence KW - Machine learning KW - Synchrotron KW - XRF PY - 2021 AN - OPUS4-54140 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, W. A1 - Wei, A. A1 - Huang, W. A1 - Zhao, Peng A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Wu, Dejian T1 - Experimental and theoretical study on the inhibition effect of CO2/N2 blends on the ignition behavior of carbonaceous dust clouds JF - Process Safety and Environmental Protection N2 - Gaseous inhibitors are used in many industries for the explosion prevention of combustible dusts, mitigating the potential hazard to humans, properties and environments. This work experimentally and theoretically studied the inerting effect of gaseous inhibitors on the ignition process of dust clouds in O2/N2/CO2 atmospheres, with an emphasis on the role of the CO2/N2 ratio. 10 different combustible carbonaceous dusts were selected, including grain dust, biomass dust and coal dust. Experimental results showed that the inhibition effect of CO2/N2 is closely related to the ignition mechanism of dust clouds. Specifically, a higher ratio of CO2/N2 yields a stronger inhibition effect on the ignition process of dust samples with relatively low volatile matter contents predominated by heterogeneous ignition. In addition, two novel steady-state ignition mechanism models were developed to interpret the experimental observations. Maxwell-Stefan equations were used to describe the diffusivity in the ternary O2/N2/CO2 gas mixtures. The analytical results were in good agreement with the experimental data of the minimum ignition temperature of dust cloud (MITC) in oxygen-lean atmospheres. The mechanism modelling can be used to estimate the critical ignition temperature of all carbonaceous dust clouds with a wide range of volatile matter content under different inert atmospheres, which will provide a reference for the explosion hazard assessment of dust posed by a hot surface in the process industries. KW - CO2/N2 ratio KW - Inerting effect KW - Volatile matter content KW - MITC KW - Mechanism model PY - 2021 DO - https://doi.org/10.1016/j.psep.2021.07.005 SN - 0957-5820 VL - 153 SP - 1 EP - 10 PB - Elsevier B.V. AN - OPUS4-53662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lutz, C. A1 - Breuckmann, M. A1 - Hampel, S. A1 - Kreyenschmidt, M. A1 - Ke, X. A1 - Beuermann, S. A1 - Schafner, K. A1 - Turek, T. A1 - Kunz, U. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Fittschen, U. E. A. T1 - Characterization of Dimeric Vanadium Uptake and Species in Nafion™ and Novel Membranes from Vanadium Redox Flow Batteries Electrolytes JF - Membranes N2 - A core component of energy storage systems like vanadium redox flow batteries (VRFB) is the polymer electrolyte membrane (PEM). In this work, the frequently used perfluorosulfonic-acid (PFSA) membrane Nafion™ 117 and a novel poly (vinylidene difluoride) (PVDF)-based Membrane are investigated. A well-known problem in VRFBs is the vanadium permeation through the membrane. The consequence of this so-called vanadium crossover is a severe loss of capacity. For a better understanding of vanadium transport in membranes, the uptake of vanadium ions from electrolytes containing Vdimer(IV–V) and for comparison also V(II), V(III), V(IV), and V(V) by both membranes was studied. UV/VIS spectroscopy, X-ray absorption near edge structure spectroscopy (XANES), total reflection X-ray fluorescence spectroscopy (TXRF), inductively coupled plasma optical emission spectrometry (ICP-OES), and micro X-ray fluorescence spectroscopy (microXRF) were used to determine the vanadium concentrations and the species inside the membrane. The results strongly support that Vdimer(IV–V), a dimer formed from V(IV) and V(V), enters the nanoscopic water-body of Nafion™ 117 as such. This is interesting, because as of now, only the individual ions V(IV) and V(V) were considered to be transported through the membrane. Additionally, it was found that the Vdimer(IV–V) dimer partly dissociates to the individual ions in the novel PVDF-based membrane. The Vdimer(IV–V) dimer concentration in Nafion™ was determined and compared to those of the other species. After three days of equilibration time, the concentration of the dimer is the lowest compared to the monomeric vanadium species. The concentration of vanadium in terms of the relative uptake λ = n(V)/n(SO3 ) are as follows: V(II) [λ = 0.155] > V(III) [λ = 0.137] > V(IV) [λ = 0.124] > V(V) [λ = 0.053] > Vdimer(IV–V) [λ = 0.039]. The results show that the Vdimer(IV–V) dimer Needs to be considered in addition to the other monomeric species to properly describe the transport of vanadium through Nafion™ in VRFBs. KW - MicroXRF KW - VRFB KW - PVDF-based membrane KW - UV/VIS KW - XANES KW - TXRF KW - ICP-OES PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-530676 DO - https://doi.org/10.3390/membranes11080576 VL - 11 IS - 8 SP - 576 PB - MDPI AN - OPUS4-53067 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grengg, C. A1 - Koraimann, G. A1 - Ukrainczyk, N. A1 - Rudic, O. A1 - Luschnig, S. A1 - Gluth, Gregor A1 - Radtke, Martin A1 - Dietzel, M. A1 - Mittermayr, F. T1 - Cu- and Zn-doped alkali activated mortar – Properties and durability in (bio)chemically aggressive wastewater environments JF - Cement and concrete research N2 - Metakaolin-based alkali activated mortars (AAM) - with and without CuSO4·5H2O and ZnO addition (mass ratio Mn+/solid binder 0.08% to 1.7%) - were casted and exposed within an extensive long-term field campaign over the period of 20 months to a sewer basin, strongly affected by biogenic acid corrosion. (Un-)exposed AAM were tested regarding their physicochemical and microstructural properties, bioreceptivity and overall durability. Metal addition led to a retarding effect during alkali-activation reaction, as well as to an increase in open porosity of up to 3.0% and corresponding lower compressive strength of up to 10.9%. Reduced microbial colonization and diversity were observed on AAM with Cu, while Zn addition led to increased biodiversity. We propose that the observed higher durability of Cu-doped AAM is due to antibacterial effects and associated reduction of biogenic acid production, superseding overall negative effects of metal-dosage on physical material properties. Observed lower durability of Zn-doped AAM was related to combined negative physicochemical and microbial effects. KW - Microbially induced corrosion KW - Alkali-activated materials KW - Biogenic acid corrosion KW - Biogene Schwefelsäurekorrosion KW - MIC PY - 2021 DO - https://doi.org/10.1016/j.cemconres.2021.106541 SN - 0008-8846 VL - 149 SP - 1 EP - 15 PB - Elsevier CY - Oxford AN - OPUS4-53070 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilke, Marco A1 - Röder, Bettina A1 - Paul, Martin A1 - Weller, Michael G. T1 - Sintered Glass Monoliths as New Supports for Affinity Columns T2 - Preprints N2 - A novel stationary phase for affinity separations is presented. This material is based on sintered borosilicate glass readily available as semi-finished filter plates with defined porosity and surface area. The material shows fast binding kinetics and excellent long-term stability under real application conditions due to lacking macropores and high mechanical rigidity. The glass surface can be easily modified with standard organosilane chemistry to immobilize selective binders or other molecules used for biointeraction. In this paper, the manufacturing of the columns and their respective column holders by 3D printing is shown in detail. The model system protein A/IgG was chosen as an example to examine the properties of such monolithic columns under realistic application conditions. Several specifications, such as (dynamic) IgG capacity, pressure stability, long-term performance, productivity, non-specific binding, and peak shape, are presented. It could be shown that due to the very high separation speed, 250 mg antibody per hour and column can be collected, which surpasses the productivity of most standard columns of the same size. The total IgG capacity of the shown columns is around 4 mg (5.5 mg/mL), which is sufficient for most tasks in research laboratories. The cycle time of an IgG separation can be less than 1 minute. Due to the glass material's excellent pressure resistance, these columns are compatible with standard HPLC systems. This is usually not the case with standard affinity columns, limited to manual use or application in low-pressure systems. The use of a standard HPLC system also improves the ability for automation, which enables the purification of hundreds of cell supernatants in one day. The sharp peak shape of the elution leads to an enrichment effect, which might increase the concentration of IgG by a factor of 3. The final concentration of IgG can be around 7.5 mg/mL without the need for an additional nanofiltration step. The purity of the IgG was > 95% in one step and nearly 99% with a second polishing run. KW - Affinity Chromatography KW - Glass KW - Purification KW - Antibodies KW - Solid support KW - HPLC KW - FPLC KW - Separation PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-529117 DO - https://doi.org/10.20944/preprints202103.0298.v1 SP - 1 PB - MDPI CY - Basel AN - OPUS4-52911 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schönhals, Andreas A1 - Szymoniak, Paulina A1 - Kolmangadi, Mohamed Aejaz A1 - Böhning, Martin A1 - Zamponi, M. A1 - Frick, B. A1 - Appel, M. A1 - Günther, G. A1 - Russina, M. A1 - Alentiev, D. A1 - Bermeshev, M. A1 - Zorn, R. T1 - Microscopic dynamics of highly permeable super glassy polynorbornenes revealed by quasielastic neutron scattering JF - Journal of Membrane Science N2 - The molecular dynamics of addition-type poly(tricyclononenes) with Si-substituted bulky side groups has been investigated by a combination of neutron time-of-flight and neutron backscattering spectroscopy methods on a time scale from 0.1 ps to ca. 3 ns. The investigated poly(tricyclononenes) PTCNSi1 and PTCNSi2g both bear a high microporosity which makes them promising candidates for active separation layers for gas separation membranes. At least for larger gas molecules it is assumed that the pathways for diffusion require an enlargement of pre-existing micropores in terms of an activated zone. A low temperature relaxation process was found for both polymers by the performed neutron scattering experiments. This process was assigned to the methyl group rotation. It was analysed in terms of a jump diffusion in a three-fold potential. The analysis of the dependence of the elastic incoherent structure factor on the scattering vector yields the number of methyl groups which might be immobilized. For PTCNSi1 (3 methyl groups in the monomeric unit) it was found that all methyl groups take part in the methyl group rotation whereas for PTCNSi2g (6 methyl groups in monomeric unit) a considerable number of methyl groups are blocked in their rotation. This immobilization of methyl groups is due to the sterically demanding arrangement of the methyl groups in PTCNSi2g. This conclusion is further supported by the result that the activation energy for the methyl group rotation is three times higher for PTCNSi2g than that of PTCNSi1. KW - Highly permeably polynorbornenes KW - Polymers of intrinsic microporosity KW - Gas separation membranes KW - Quasielastic neutron scattering PY - 2021 DO - https://doi.org/10.1016/j.memsci.2021.119972 SN - 0376-7388 VL - 642 PB - Elesevier B.V. AN - OPUS4-53508 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schilling, Markus A1 - Niebergall, Ute A1 - Marschall, Niklas A1 - Alig, I. A1 - Böhning, Martin T1 - A phenomenological criterion for an optical assessment of PE-HD fracture surfaces obtained from FNCT JF - Polymer Testing N2 - The full-notch creep test (FNCT) is a common test method to evaluate the environmental stress cracking (ESC) behavior of high-density polyethylene (PE-HD), e.g. for container materials. The test procedure as specified in ISO 16770 provides a comparative measure of the resistance against ESC using the time to failure of PE-HD specimens under constant mechanical load in a well-defined liquid test environment. Since the craze-crack damage mechanism underlying the ESC phenomenon is associated with brittle failure, the occurrence of a predominantly brittle fracture surface is a prerequisite to consider an FNCT measurement as representative for ESC, i.e. a time to failure dominated by craze-crack propagation. The craze-crack propagation continuously reduces the effective residual cross-sectional area of the specimen during the test, which results in a corresponding increase of the effective mechanical stress. Thus, a transition to ductile shear deformation is inevitable at later stages of the test, leading usually to a pronounced central ligament. Therefore, an optical evaluation of FNCT fracture surfaces concerning their brittleness is essential. An enhanced imaging analysis of FNCT fracture surfaces enables a detailed assessment of craze-crack Propagation during ESC. In this study, laser scanning microscopy (LSM) was employed to evaluate whether FNCT fracture surfaces are representative with respect to craze-crack propagation and ESC. Based on LSM height data, a phenomenological criterion is proposed to assess the validity of distinct FNCT measurements. This criterion is supposed to facilitate a quick evaluation of FNCT results in practical routine testing. Its applicability is verified on a sample basis for seven different commercial PE-HD container materials. KW - Environmental stress cracking (ESC) KW - Full notch creep test (FNCT) KW - Laser scanning microscopy (LSM) KW - Fracture surfaces KW - Optical criterion of brittleness PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-521012 DO - https://doi.org/10.1016/j.polymertesting.2020.107002 VL - 94 SP - 107002 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-52101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Neue Erkenntnisse zur Deckschichtbildung von Zink an der Atmosphäre N2 - Die Untersuchungen und Ausführungen im Vortrag belegen, dass verfügbare Modellvorstellungen zur Beschreibung der Deckschichtbildung und Korrosion von Zink unter aktuellen atmosphärischen Bedingungen in Europa nicht mehr gültig sind und neu bewertet werden müssen. So können beispielsweise bisher verfügbare Prognosemodelle den Korrosionsfortschritt nicht mehr ausreichend beschreiben, da durch die Verringerung des Schwefeldioxidgehaltes der Luft veränderte Mechanismen vorliegen. T2 - Sitzung des Forschungsbeirats des Gemeinschaftsausschuss Verzinken e.V. CY - Online Meeting DA - 07.10.2021 KW - Atmosphärische Korrosion KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Zink PY - 2021 AN - OPUS4-53478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Valet, Svenja A1 - Kotula, Stefan A1 - Burkert, Andreas T1 - Vorstellung des WIPANO-Vorhabens GELELEK N2 - Der Vortrag stellt das WIPANO-Forschungsvorhaben GELELEK vor und fasst die wichtigsten erzielten Ergebnisse zusammen. T2 - Sitzung des Forschungsbeirats des Gemeinschaftsausschuss Verzinken e.V. CY - Online meeting DA - 07.10.2021 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosionsuntersuchungen KW - Normung KW - Ringversuch KW - Zink PY - 2021 AN - OPUS4-53479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Neue Erkenntnisse zur Deckschichtbildung von Zink an der Atmosphäre N2 - Die Untersuchungen und Ausführungen im Vortrag belegen, dass verfügbare Modellvorstellungen zur Beschreibung der Deckschichtbildung und Korrosion von Zink unter aktuellen atmosphärischen Bedingungen in Europa nicht mehr gültig sind und neu bewertet werden müssen. So können beispielsweise bisher verfügbare Prognosemodelle den Korrosionsfortschritt nicht mehr ausreichend beschreiben, da durch die Verringerung des Schwefeldioxidgehaltes der Luft veränderte Mechanismen vorliegen. T2 - Sitzung des GfKORR Arbeitskreises „Zink und Zinküberzügel“ CY - Online meeting DA - 28.09.2021 KW - Atmosphärische Korrosion KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Zink PY - 2021 AN - OPUS4-53410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Investigation of the salinization in marine and offshore environment - test methods and challenges N2 - Salinization and contamination of metal surfaces by chloride-containing aerosols is of great importance with regard to corrosion phenomena in the maritime sector and in offshore applications. The evaluation of the scientific literature and regulatory guidelines has shown that there are still many open questions regarding the contamination of metal surfaces by chlorides. This contribution will discuss how salinization of metal surfaces is evaluated and monitored according to current standards and guidelines. T2 - 3rd Task Group Meeting TC124 WG4-TC 250 SC5 Task Group Corrosion CY - Online Meeting DA - 19.05.2021 KW - Maritime atmosphere KW - Salinization KW - Corrosion PY - 2021 AN - OPUS4-52677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Goedecke, Thomas T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept T2 - Proceedings of IAPRI Member Conference 2021 N2 - Abstract: The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. T2 - IAPRI Member Conference 2021 CY - Online meeting DA - 15.06.2021 KW - Bags KW - Dangerous goods packagings KW - Sift-proofness KW - Particles KW - Leak PY - 2021 UR - https://whova.io/email/click/d11d7d6cf1c84dfdc8c12349468fe91c/c9af5bcf002312cff80d9b962d1014e4/ SN - 978-1-63821-160-0 SP - 390 EP - 405 PB - IAPRI CY - East Lansing, Michigan, USA AN - OPUS4-52786 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Musolff, André A1 - Gleim, Tobias A1 - Nehrig, Marko A1 - Wille, Frank T1 - Fire Testing - Current Activities N2 - The presentation gives an overview over three current fire testing activities for testing transport packages for the transport of high-level radioactive material. Packages for the transport of high-level radioactive material must withstand severe hypothetical accidents. Regulatory test conditions shall cover these severe accident conditions and consist of mechanical tests and a following thermal test. To withstand the mechanical tests heavy weight packages are often designed with impact limiters consisting of wood encapsulated in steel sheets. The thermal test is defined precisely in the IAEA-regulations as a 30 minute fully engulfing 800 °C fire. After the fire phase a pre-damaged impact limiter might continue burning or smoldering and influence the cask thermal behavior with its energy release. The energy transferred from the impact limiter to the cask is of importance for the safety of transport packages. A full-scale fire test with an impact limiter of 2.3 m in diameter and filled with spruce wood was designed and performed. The impact limiter continued burning for 3 days. Energy transfer and temperature measurements were performed. A new test is designed to examine pressure build up and possible mechanical failures in an undamaged impact limiter with a diameter of 1.9 m. The test is designed to measure heat flux from the impact limiter in case of its ignition and burning. To furthermore examine the burning behavior of steel encapsulated wood piles, tests are prepared with wood fire containers and an infrared ignition source. A fire reference package for calorimetric tests was designed. The fire reference package design consists of a closed steel sheet cylinder with a length of 1,500 mm, an exterior diameter of 1,050 mm, and a wall thickness of 10 mm. The cylinder was filled with refractory insulation material and instrumented with thermocouples distributed all over the cylinder. The measured local steel sheet temperatures allow the determination of local as well as overall integral heat fluxes versus time and versus surface temperature. Currently, tests are planned with a new and relatively small fire reference package design. The new design will have a steel sheet cylinder with a length of 182 mm, an exterior diameter of 120 mm. Additionally heat flux sensors will be used in the new fire reference package test design. The propane gas fire will be adjusted with respect to the outcome of the fire tests to meet the requirements of the IAEA-fire. T2 - Technical Exchange IRSN – BAM Transport & Storage of Packages for Radioactive Material CY - Berlin, Germany DA - 08.09.2021 KW - Heat flux sensor KW - Propane gas fire KW - Wood fire PY - 2021 AN - OPUS4-53242 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schubert, Sven A1 - Reichardt, Adrian A1 - Wille, Frank A1 - Komann, Steffen A1 - Neumann, Martin T1 - Introduction of an ageing management approach for packages for the transport of radioactive materials T2 - Proceedings of the INMM & ESARDA Joint Annual Meeting N2 - With integration of the new para 613A into SSR-6 [1] the consideration of ageing mechanisms is now obligatory for the design of packages and their approval. In addition, para 809(f) of SSR-6 [1] requires consideration of the effects of storage on ageing mechanisms, safety analyses and operation and maintenance instructions. German competent authorities Bundesanstalt für Materialforschung und -prüfung (BAM) and Bundesamt für die Sicherheit der nuklearen Entsorgung (BASE) are considering the aspect of ageing in approval procedures. Ageing assessment is mainly focused on dual purpose casks (DPC) package designs which are long-term stored in interim storage facilities. For these package designs, the evaluation of ageing management is now mandatory for the maintenance of the package design approvals with a validity period of 5 years and beyond. The ageing management includes amongst others a gap analysis, the assessment of ageing effects and operational experiences during operation and interim storage. BAM works on the compilation of a guideline for implementation of paras 613A, 809(f) and 809(k) for packages requiring competent authority approval at the application procedure in Germany. The paper describes essential items of ageing mechanisms and will give a foresight to the ageing management evaluation by BAM. T2 - INMM & ESARDA Joint Annual Meeting CY - Online meeting DA - 30.08.2021 KW - Dual purpose casks KW - Ageing KW - SSR-6 KW - Interim storage KW - Ageing mechanisms KW - Transport of radaioactive materials PY - 2021 UR - https://www.abstractsonline.com/pp8/#!/10383/presentation/964 SP - 1 EP - 6 PB - Institute of Nuclear Materials Management (INMM) CY - Mount Laurel, NJ AN - OPUS4-53180 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Valet, Svenja A1 - Kotula, Stefan A1 - Burkert, Andreas T1 - Vorstellung des Forschungsvorhabens GELELEK N2 - Der Vortrag stellt das Forschungsvorhaben GELELEK im Rahmen der Ad hoc Gruppe "GELELEK" des DIN-Normenausschusses Materialprüfung (NMP) vor. T2 - Sitzung der Ad hoc Gruppe "GELELEK" im DIN-Normenausschuss Materialprüfung (NMP) CY - Online Meeting DA - 21.04.2021 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosionsuntersuchungen KW - Zink PY - 2021 AN - OPUS4-52541 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Neue Erkenntnisse zur Deckschichtbildung von Zink an der Atmosphäre N2 - Die Untersuchungen und Ausführungen im Vortrag belegen, dass verfügbare Modellvorstellungen zur Beschreibung der Deckschichtbildung und Korrosion von Zink unter aktuellen atmosphärischen Bedingungen in Europa nicht mehr gültig sind und neu bewertet werden müssen. So können beispielsweise bisher verfügbare Prognosemodelle den Korrosionsfortschritt nicht mehr ausreichend beschreiben, da durch die Verringerung des Schwefeldioxidgehaltes der Luft veränderte Mechanismen vorliegen. T2 - Sitzung des GfKORR Arbeitskreises „Korrosion und Korrosionsschutz von Eisen und Stahl“ CY - Online meeting DA - 22.06.2021 KW - Atmosphärische Korrosion KW - Gelartige Elektrolyte KW - Deckschichtbildung KW - Zink PY - 2021 AN - OPUS4-52843 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schlick-Hasper, Eva A1 - Bruchno, Martin A1 - Thomas, Goedecke T1 - Release of Powdery or Granular Substances from Intact Dangerous Goods Bags During Road Transport - Analysis of the Causes and Development of a Test Concept JF - Packaging Technology And Science N2 - The leaks of dangerous goods from actually intact bags detected in the years 2018 to 2020 tend to be at an almost constant high level. These releases of powdery or granular dangerous goods represent violations of the sift-proofness required in the dangerous goods regulations. This article first analyzes the causes. The components of the bags that are affected by leaks are micro-perforations, joins and closures, in particular internal sleeve valves. A distinction must be made between bags closed in conformity with or contrary to the manufacturer's instructions. The particle release is determined by a number of influencing factors of the filling substance, the packaging and other boundary conditions. Therefore, a comprehensive test concept is developed in this work, which takes all these factors into account. The application of this test concept facilitates the planning of the test setup and the experiments. On this basis, the complex mechanisms involved in the release of solid substances can be systematically investigated in the test laboratory. To prevent releases of powdery or granular substances from intact bags, it is necessary that the user has access to the closing instructions and the relevant properties of the test substance used for the design type approval. Further experimental investigations are needed to assess whether filling substances change their properties during transport and whether this enables them to escape. KW - Bags KW - Dangerous goods packagings KW - Leak KW - Particles KW - Sift-proofness PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527287 DO - https://doi.org/10.1002/pts.2575 SN - 0894-3214 VL - 34 IS - 7 SP - 435 EP - 446 PB - Wiley AN - OPUS4-52728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - New findings on the formation of corrosion product layers on zinc in the atmosphere N2 - The presentation shows systematic investigations to describe the corrosion and corrosion product formation processes of pure zinc under the climatic conditions currently prevailing in the Federal Republic of Germany. The investigations in their entirety aim at questioning current and establishing new ways of looking at the formation of corrosion products of pure zinc under atmospheric corrosion conditions. Thus, they make a significant contribution in understanding corrosion protection by zinc and zinc coatings. In particular, the focus is placed on the initial stage of the corrosion product formation. A systematic investigation of this time range, which is characterized by very reactive corrosion products, is only made possible by using gel-type electrolytes. The short periods of time at the beginning of weathering is now measurable and their influence on the formation of corrosion products and the kinetics of layer formation describable. By combining the new electrochemical approach with gravimetric, microscopic and analytical methods, new insights could be gained both on a methodic and scientific level. T2 - 2nd Task Group Meeting TC124 WG4-TC 250 SC5 Task Group Corrosion CY - Online Meeting DA - 06.05.2021 KW - Zinc KW - Corrosion products KW - Gel-type electrolytes KW - Corrosion KW - Atmospheric corrosion PY - 2021 AN - OPUS4-52604 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Valet, Svenja A1 - Burkert, Andreas A1 - Ebell, Gino A1 - Babutzka, Martin T1 - Determination of the corrosion product layer resistance on zinc and electrolytically galvanized steel samples by using gel electrolytes JF - Electrochimica Acta N2 - Although zinc and zinc coatings have been widely used for corrosion protection for decades new zinc coatings are constantly being developed. Characterizing the corrosion protectiveness of these new coatings, however, should not be underestimated. While exposure tests are time intensive, cyclic tests can only be used for a very limited field of application. Thus, electrochemical measurements provide both an efficient and an effective alternative. Conventional aqueous bulk electrolytes influence the surface layers of a tested zinc coating and are therefore not reliable. Gel electrolytes, however, have evolved over the last few years, are minimally invasive and provide reliable results. This work describes experiments with gel electrolytes made of agar. Unlike previous work, it proposes a composition of gel electrolyte for minimally invasive description of the protective power of naturally formed oxide layers on zinc and zinc coatings. Therefore, as a first part, the gel electrolyte made of agar is verified as a method for zinc and zinc-coated samples. Afterwards, this paper introduces the corrosion product layer resistance RL as a promising parameter to evaluate the protective power of zinc coatings. Results are verified with EIS and FTIR measurements. An example on a representative zinc coating demonstrates the practical application. KW - Gel electrolytes KW - Agar KW - Zinc coatings KW - Atmospheric exposure KW - Corrosion PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-526053 DO - https://doi.org/10.1016/j.electacta.2021.138191 SN - 0013-4686 VL - 385 SP - 138191 PB - Elsevier Ltd. AN - OPUS4-52605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lüth, Peter A1 - Uhlig, S. A1 - Frost, K. A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Zakel, Sabine T1 - CEQAT-DGHS interlaboratory tests for chemical safety: Validation of laboratory test methods by determining the measurement uncertainty and probability of incorrect classification including so-called “Shark profiles” JF - Journal of Loss Prevention in the Process Industries N2 - Laboratory test results are of vital importance for correctly classifying and labelling chemicals as “hazardous” as defined in the UN Globally Harmonized System (GHS) / EC CLP Regulation or as “dangerous goods” as defined in the UN Recommendations on the Transport of Dangerous Goods. Interlaboratory tests play a decisive role in assessing the reliability of laboratory test results. Interlaboratory tests performed over the last 10 years have examined different laboratory test methods. After analysing the results of these interlaboratory tests, the following conclusions can be drawn: 1. There is a need for improvement and validation for all laboratory test methods examined. 2. To avoid any discrepancy concerning the classification and labelling of chemicals, the use of validated laboratory test methods should be state of the art, with the results accompanied by the measurement uncertainty and (if applicable) the probability of incorrect classification. This paper addresses the probability of correct/incorrect classification (for example, as dangerous goods) on the basis of the measurement deviation obtained from interlaboratory tests performed by the Centre for quality assurance for testing of dangerous goods and hazardous substances (CEQAT-DGHS) to validate laboratory test methods. This paper outlines typical results (e.g. so-called “Shark profiles” – the probability of incorrect classification as a function of the true value estimated from interlaboratory test data) as well as general conclusions and steps to be taken to guarantee that laboratory test results are fit for purpose and of high quality. T2 - 13th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2020) CY - Brunswick, Germany DA - 27.07.2020 KW - Dangerous goods KW - Hazardous substances KW - Interlaboratory test KW - Test method KW - Validation KW - Quality assurance KW - Measurement uncertainty KW - Incorrect classification KW - Shark profiles PY - 2021 DO - https://doi.org/10.1016/j.jlp.2021.104532 SN - 0950-4230/ VL - 72 SP - 104532 PB - Elsevier Ltd. AN - OPUS4-52751 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wilke, Marco A1 - Röder, Bettina A1 - Paul, Martin A1 - Weller, Michael G. T1 - Sintered glass monoliths as supports for affinity columns JF - Separations N2 - A novel stationary phase for affinity separations is presented. This material is based on sintered borosilicate glass readily available as semi-finished filter plates with defined porosity and surface area. The material shows fast binding kinetics and excellent long-term stability under real application conditions due to lacking macropores and high mechanical rigidity. The glass surface can be easily modified with standard organosilane chemistry to immobilize selective binders or other molecules used for biointeraction. In this paper, the manufacturing of the columns and their respective column holders by 3D printing is shown in detail. The model system protein A/IgG was chosen as an example to examine the properties of such monolithic columns under realistic application conditions. Several specifications, such as (dynamic) IgG capacity, pressure stability, long-term performance, productivity, non-specific binding, and peak shape, are presented. It could be shown that due to the very high separation speed, 250 mg antibody per hour and column can be collected, which surpasses the productivity of most standard columns of the same size. The total IgG capacity of the shown columns is around 4 mg (5.5 mg/mL), which is sufficient for most tasks in research laboratories. The cycle time of an IgG separation can be less than 1 min. Due to the glass material’s excellent pressure resistance, these columns are compatible with standard HPLC systems. This is usually not the case with standard affinity columns, limited to manual use or application in low-pressure systems. The use of a standard HPLC system also improves the ability for automation, which enables the purification of hundreds of cell supernatants in one day. The sharp peak shape of the elution leads to an enrichment effect, which might increase the concentration of IgG by a factor of 3. The final concentration of IgG can be around 7.5 mg/mL without the need for an additional nano-filtration step. The purity of the IgG was > 95% in one step and nearly 99% with a second polishing run. KW - Affinity Chromatography KW - Affinity Extraction KW - Affinity Separation KW - Protein Purification KW - Down Stream Processing KW - Antibody Purification KW - Diagnostic Antibodies KW - Therapeutic Antibodies KW - Automated Purification KW - HPLC KW - FPLC KW - IgG determination KW - Concentration step KW - Monoclonal Antibodies KW - Polyclonal Antibodies KW - Human Plasma KW - Glass Support KW - Borosilicate Glass KW - Monolith KW - Sintered Material KW - Additive Manufacturing KW - Column holder KW - Construction KW - Open Science KW - Citizen Science KW - Protein A KW - Regeneration KW - High-Speed Separations KW - Robustness PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-527581 DO - https://doi.org/10.3390/separations8050056 SN - 2297-8739 VL - 8 IS - 5 SP - 1 EP - 16 PB - MDPI CY - Basel AN - OPUS4-52758 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thuy, Maximilian A1 - Niebergall, Ute A1 - Oehler, H. A1 - Alig, I. A1 - Böhning, Martin T1 - Evaluation of the damaging effect of crop protection formulations on high density polyethylene using the Full Notch Creep Test JF - Polymer N2 - Four typical high-density polyethylene container materials were used to investigate damage or stress cracking behavior in contact with model liquids for crop protection products. These model liquids are established in German regulations for the approval of dangerous goods containers and consist of typical admixtures used for crop protection products but without biological active ingredients. This study is performed with the standardized method of Full Notch Creep Test, adapting the media temperature to 40 °C according to the usual conditions where these test liquids are applied. The two model liquids differ into a water-based solution and a composition based on different organic solvents which are absorbed by the material up to significant levels. Therefore, extensive sorption measurements are performed. The fracture surfaces obtained are analyzed in detail not only by light microscopy, but also by laser scanning microscopy as well as scanning electron microscopy. Influence of pre-saturation and applied stress are addressed by respective systematic series of experiments. KW - Polyethylene KW - Full Notch Creep Test KW - Environmental Stress Cracking KW - Fracture PY - 2021 DO - https://doi.org/10.1016/j.polymer.2021.123853 SN - 0032-3861 VL - 228 SP - 123853 PB - Elsevier Ltd. AN - OPUS4-52686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - New findings on the formation of corrosion product layers on zinc in the atmosphere N2 - The presentation shows systematic investigations to describe the corrosion and corrosion product formation processes of pure zinc under the climatic conditions currently prevailing in the Federal Republic of Germany. The investigations in their entirety aim at questioning current and establishing new ways of looking at the formation of corrosion products of pure zinc under atmospheric corrosion conditions. Thus, they make a significant contribution in understanding corrosion protection by zinc and zinc coatings. In particular, the focus is placed on the initial stage of the corrosion product formation. A systematic investigation of this time range, which is characterized by very reactive corrosion products, is only made possible by using gel-type electrolytes. The short periods of time at the beginning of weathering is now measurable and their influence on the formation of corrosion products and the kinetics of layer formation describable. By combining the new electrochemical approach with gravimetric, microscopic and analytical methods, new insights could be gained both on a methodic and scientific level. T2 - EUROCORR 2021 CY - Online meeting DA - 20.09.2021 KW - Atmospheric Corrosion KW - Corrosion KW - Corrosion products KW - Gel-type electrolytes KW - Zinc PY - 2021 AN - OPUS4-53332 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, Dejian A1 - Schmidt, Martin A1 - Krietsch, Arne A1 - Krause, U. T1 - Effect of oxygen concentration, inert gas and CH4/H2 addition on the minimum ignition energy of coal dusts JF - Journal of Loss Prevention in the Process Industries 77 (2022) 104772 N2 - MIKE III apparatus tests were conducted to investigate the minimum ignition energy (MIE) of coal dusts in air and O2/CO2 atmospheres with and without small amount of CH4/H2. The O2 mole fraction (XO2) in the gas mixtures varied from 21% to 50% with the CH4/H2 mole fraction from 0 to 2%. Experimental result showed that MIE of coal dusts significantly decreases even by three orders of magnitude in mJ with increasing XO2 and the addition of CH4/H2. Compared with CH4, H2 had a relatively strong promotion effect on the spark ignition of coal dusts. The inhibiting effect of CO2 was found to be much stronger than N2, but this inhibiting effect of CO2 could be eliminated by 9% increment of XO2. The effect on MIE of coal dusts thus followed by the order: 9% increment of XO2 > CO2 replacing N2 > 2% CH4 or H2 addition. Moreover, two empirical models were used to estimate the MIE of hybrid dust-gas mixture (HMIE), and the results showed that calculated data can well reflect the promoting effect of elevated XO2 and flammable gas addition, and the inhibiting effect of inert gas KW - Ignition energy KW - Hybrid mixture KW - Oxygen rich KW - Inerting effect KW - Empirical model PY - 2022 DO - https://doi.org/10.1016/j.jlp.2022.104772 SN - 0950-4230 VL - 77 SP - 1 EP - 10 PB - Elsevier Ltd. AN - OPUS4-55888 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Emamverdi, Farnaz A1 - Yin, Huajie A1 - Smales, Glen Jacob A1 - Harrison, W. J. A1 - Budd, P. M. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Polymers of intrinsic microporosity - Molecular mobility and physical aging revisited by dielectric spectroscopy and X‑ray scattering JF - Macromolecules N2 - Polymers of intrinsic microporosity (PIMs) are promising candidates for the active layer in gas separation membranes due to their high permeability and reasonable permselectivity. These appealing properties originate from a microporous structure as a result of inefficient segment packing in the condensed state due to a combination of a ladder-like rigid backbone and sites of contortion. However, this class of polymers suffers from a significant decrease in the permeability with time due to physical aging, whereby typically, the permselectivity increases. The initial microporous structures approach a denser state via local rearrangements, leading to the reduction of the permeability. Hence, a detailed characterization of the molecular mobility in such materials can provide valuable information on physical aging. In this work, the dielectric behavior of PIM-1 films and their behavior upon heating (aging) were revisited by isothermal frequency scans during different heating/cooling cycles over a broad temperature range between 133 and 523 K (−140 to 250 °C). In addition, the obtained results were compared with data of samples that were annealed at ambient temperatures over different time scales. Multiple dielectric processes were observed: several relaxation processes due to local fluctuations and a Maxwell−Wagner−Sillars polarization effect related to the microporosity. The temperature dependence of the rates of all processes follows the Arrhenius law where the estimated activation energy depends on the nature of the process. The influence of the thermal history (aging) on the processes is discussed in detail. KW - Polymers of intrinsic microporosity PY - 2022 DO - https://doi.org/10.1021/acs.macromol.2c00934 VL - 55 SP - 7340 EP - 7350 PB - American Chemical Society CY - Washington, DC AN - OPUS4-55485 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Müller, Thoralf T1 - Field exposure studies under sheltered and unsheltered conditions at different test sites in northern and eastern Germany: Update after 5 years of exposure N2 - A series of field exposure tests according to ISO 9223 up to 9226 was carried out at different locations to determine the corrosivity and the corrosion progress of different test sites throughout northern and eastern Germany. Standard test specimens of steel, zinc, copper and aluminium were exposed to rural, city and marine atmosphere at test sites of the Bundesanstalt für Materialforschung und -prüfung (BAM). Test sites at city atmosphere comprised exposure on a rooftop, next to a highly frequented road and directly at a motorway. Exposure under marine conditions was carried out at Heligoland in the North Sea. The specimens were stored under sheltered and unsheltered conditions on each test site, respectively. Corrosion rates after the first year of field exposure were determined and used for the classification of the atmospheres and the test sites regarding the corrosivity category. Results after the first year of exposure were presented at the EUROCORR 2018 in Cracow. The current presentation will present an update of results of the systematic study after five years of exposure. The corrosion progress and the mass loss of the standard metals steel, zinc, copper and aluminium will be presented and discussed with respect to the atmospheric conditions and the time of wetness at the test sites. In addition, the difference between sheltered and unsheltered conditions will be discussed. T2 - EUROCORR 2022 CY - Berlin, Germany DA - 28.08.2022 KW - Atmospheric Corrosion KW - Atmosphärische Korrosion KW - Korrosionsuntersuchungen KW - Corrosion testing PY - 2022 AN - OPUS4-55602 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Maximilian, Thuy A1 - Spyrantis, Alexander A1 - Böhning, Martin A1 - Niebergall, Ute A1 - Maaß, Robert T1 - Spatially resolved roughness exponent in polymer fracture JF - Physical review materials N2 - The fracture surface of slow and continuous crack propagation during environmental stress cracking of a semicrystalline polyethylene exhibits isotropic roughness exponents at the local scale but resolved across the macroscopic fracture surface a clear position dependence is found. The spatially resolved roughness exponent admits values in the range between 0.1 and 0.4, demonstrating nontrivial exponents in the small length-scale regime. Instead, they vary across the fracture surface according to the stress-state distribution, which suggests that the exponents are intimately linked to the locally dominating dissipation processes during craze cracking. KW - Plasticity KW - Fracture KW - Material failure KW - Mechanical deformation PY - 2022 DO - https://doi.org/10.1103/PhysRevMaterials.6.L090601 VL - 6 IS - 9 SP - 1 EP - 7 PB - American Physical Society CY - USA, Maryland AN - OPUS4-55797 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Gleim, Tobias A1 - Wille, Frank T1 - Temperature and Heat Flux Measurements in Fire Testing N2 - Packages for the transport of Spent Nuclear Fuel and high active radioactive waste are designed to withstand severe accidents. Specific mechanical and thermal tests are defined in the IAEA Regulations for the Safe Transport of Radioactive Materials in order to cover these hypothetical severe accidents. The thermal test mainly consists of a 30 minute fully engulfing fire. Components such as the package impact limiters can lead to supplementary energy release during the thermal test as they might continue burning after the fire phase. Local heat flux into the package can occur. Measurement of heat flux into the package is of importance to evaluate component temperatures and review their acceptance. The usability of heat flux sensors and temperature measurement equipment has to be tested to apply them in impact limiter fire testing. Further questions arise such as :“Is the infrared camera a useful tool to determine heat flux at the boundary surface?” T2 - Technical Exchange IRSN – BAM Transport & Storage of Packages for Radioactive Material CY - Berlin, Germany DA - 08.09.2021 KW - Heat flux sensor PY - 2021 AN - OPUS4-55659 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Habib, Abdel Karim A1 - van Wingerden, K. T1 - Consequences of exposing cryogenic storage vessels containing liquid hydrogen to a fire load N2 - Experiments have been performed to determine whether a storage vessel containing LH2 and caught in a fire engulfing the vessel can result in a BLEVE (Boiling Liquid Expanding Vapour Explosion) and if so its effects. The tests were performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) in Horstwalde, Germany. Three tests were performed using double-walled vacuum insulated vessels of 1 m3 volume. The cylindrical Vessels differed in orientation (horizontal or vertical) and the insulation material used (perlite or multi-layer insulation (MLI)). The degree of filling of the vessels was approximately 35-40 % in each of the tests performed. The fire load was provided by a propane fed burner positioned under the storage vessel and designed to give a homogeneous fire load. The conditions in the vessel (temperatures and pressure) as well as external effects (heat radiation, blast waves, flame ball development and fragmentation) were measured. All vessels were equipped with K-type thermocouples at several locations: inside the inner vessel in the gas phase and the liquid phase, on the inner and outer side of the inner vessel and on the inner and outer side of the outer vessel. The pressure inside the inner vessel (both in liquid, as a level indicator, and gaseous phase), and in the space between the inner and outer vessels (vacuum pressure) was measured. Bolometers were used to measure the heat radiation generated by both the propane fire and that generated by a possible fireball/BLEVE. To measure blast generated by the vessel burst/BLEVEs blast pencils were positioned at three locations in two directions. Weather conditions were monitored at two weather stations. Further several cameras were used to monitor the events: normal cameras, infrared (IR)-cameras, high-speed cameras also on board of a drone. Two of these vessels, a horizontal and a vertical vessel both insulated with perlite withstood the fire loading for 1 hour 20 minutes and 4 hours respectively without catastrophic failure. A horizontal vessel insulated with MLI failed by bursting after 1 hour and 6 minutes resulting in a fireball, fragments, and blast waves. T2 - 14th International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions (ISHPMIE) CY - Braunschweig, Germany DA - 11.07.2022 KW - Liquid Hydrogen KW - LH2 KW - BLEVE KW - Cryogenic Tank PY - 2022 AN - OPUS4-55355 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gleim, Tobias A1 - Neumann, Martin A1 - Linnemann, Konrad A1 - Komann, Steffen A1 - Wille, Frank T1 - Fracture Mechanical Analyses of a Welding Seam of a Thick-Walled Transport Package T2 - Proceedings of the ASME 2022 Pressure Vessels & Piping Conference N2 - Transport packages shall satisfy various safety criteria regarding mechanical, thermal and radiation phenomena. Typical requirements focusing mechanical aspects are usually drop tests in accordance with IAEA regulations. The drop tests are usually carried out experimentally and, as an additional measure, finite element analyses (FEA) are performed. A specific part of the investigations presented is the evaluation of the welding seam connecting cask shell and cask bottom. Experimental results and FEA are presented and compared. The evaluation of the welding seam performed includes a variety of aspects. In addition to the experimental and analytical stresses determined, different standards are used to investigate a possible crack initiation. Several destructive and non-destructive tests are performed for quality assurance in the manufacturing process as well as for different input parameters. The necessary monitoring and non-destructive measurement methods to define the boundary conditions of the standards are introduced. Taking into account all required parameters, the welding seam is examined and evaluated using the failure assessment diagrams (FAD) of the respective standards. It can be shown under the given boundary conditions that considering the experimental data, the welding seam is in the context of crack initiation below the enveloping curve in the acceptable region. More critical drop tests to be conducted are proposed and need to be investigated in future work. T2 - Pressure Vessels & Piping Conference® 2022 CY - Las Vegas, NV, USA DA - 17.07.2022 KW - Transport package KW - Drop test KW - Fracture initiation PY - 2022 SP - 1 EP - 9 AN - OPUS4-55375 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thuy, Maximilian A1 - Niebergall, Ute A1 - Oehler, H. A1 - Alig, I. A1 - Böhning, Martin T1 - Damaging effect of admixtures used in crop protection products on high density polyethylene packaging material JF - Polymer Testing N2 - The phenomenon of environmental stress cracking is still a major issue in materials engineering as well as from a scientific perspective. Especially in the case of packaging materials made of high-density polyethylene, assessing the potential of premature damage due to environmental stress cracking is complex because of the large number of components in possible liquid filling goods. As a first guideline, the well-known effect of detergents and dispersants is usually considered, but the interplay with other components, such as organic solvents is often unknown. Particularly challenging in this respect are crop protection products, consisting of several different admixtures in addition to the biologically active ingredients. This study is based on two model liquids representing these admixtures that were established for testing in this context. The model liquids as well as their constituting components were used as liquid media in the Full Notch Creep Test to characterize the environmental stress cracking behavior of a typical high-density polyethylene. Complementary to the time-to failure of a notched specimen obtained from these tests, the crack opening was monitored optically, and the fracture surface was analyzed post-failure by laser scanning microscopy as well as scanning electron microscopy. Based on the results, the effect of various surfactants as well as the influence of organic solvents on environmental stress cracking are discussed. KW - Environmental stress cracking KW - High-density polyethylene KW - Crop protection products KW - Full notch creep test KW - Fracture surface analysis KW - Crack opening displacement PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-554631 DO - https://doi.org/10.1016/j.polymertesting.2022.107672 SN - 0142-9418 VL - 114 SP - 1 EP - 16 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-55463 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - van Wingerden, K. A1 - Kluge, Martin A1 - Habib, Abdel Karim A1 - Ustolin, F. A1 - Paltrinieri, N. ED - Pierucci, S. ED - Klemes, J. J. T1 - Medium-scale tests to investigate the possibility and effects of BLEVEs of storage vessels containing liquified hydrogen JF - CEt - Chemical Engineering Transactions N2 - Experiments have been performed to determine the consequences of a storage vessel containing liquified hydrogen (LH2) is engulfed by a fire. The tests were performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) in Germany within a research cooperation between BAM and Gexcon as part of the SH2IFT program. Three tests were performed using double-walled vacuum insulated vessels of 1 m3 volume varying the orientation of the vessel and the effect of the insulation material used (perlite or multi-layer insulation (MLI)). The degree of filling of the vessel was approximately 35 % in each of the tests performed. The fire load was provided by a propane fed burner positioned under the storage vessel and designed to give a homogeneous fire load. In one of the tests a rupture of the storage vessel occurred causing a blast, a fireball and fragments. Apart from measuring these consequences, the conditions in the vessel (e.g. temperatures and pressure) during the heating process were monitored in all three tests. The work described was undertaken as part of the project Safe Hydrogen fuel handling and Use for Efficient Implementation (SH2IFT). T2 - 17th EFCE International Symposium on Loss Prevention and Safety Promotion in Process Industries CY - Prague, Czech Republic DA - 05.06.2022 KW - Liquid hydrogen KW - LH2 KW - BLEVE KW - Cryogenic tank PY - 2022 DO - https://doi.org/10.3303/CET2290092 SN - 2283-9216 VL - 90 SP - 547 EP - 552 PB - AIDIC CY - Milano AN - OPUS4-55323 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - van Wingerden, K. A1 - Kluge, Martin A1 - Habib, Abdel Karim A1 - Skarsvag, H. L. A1 - Ustolin, F. A1 - Paltrinieri, N. A1 - Odsaeter, L. H. ED - Pierucci, S. ED - Klemes, J. J. T1 - Experimental Investigation into the Consequences of Release of Liquified Hydrogen onto and under Water JF - CEt - Chemical Engineering Transactions N2 - Large-scale experiments have been performed to investigate the possible consequences of realistic amounts of liquified hydrogen (LH2) encountering water. The experiments aimed at simulating an accidental release of LH2 onto water, for instance during the fuelling of a ship. For liquified natural gas (LNG), it has been demonstrated that physical explosions may occur when it is spilled onto water. These phenomena are referred as rapid phase transitions (RPTs). It cannot be excluded that RPTs are also possible in the case of LH2. The tests were performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) in Horstwalde, Germany. The tests were performed in a 10 m x 10 x 1.5 m basin filled with water. LH2 releases of up to about 1 kg/s were established releasing directly from a trailer carrying LH2. The releases occurred from a height of 50 cm above the water surface pointing downwards, 30 cm under the water surface pointing downwards and 30 cm under the water surface pointed along the water surface. All release configurations resulted in a very chaotic LH2-water mixing zone, causing considerable evaporation and resulting in minor over pressures. No RPTs were observed. The main phenomenon to be observed is, however, an ignition of the released gas cloud resulting in significant blast wave overpressures and heat radiation to the surroundings. The ignition occurred in all under-water releases and in about 90 % of the releases above the water surface. T2 - 17th EFCE International Symposium on Loss Prevention and Safety Promotion in Process Industries CY - Prague, Czech Rebpublic DA - 05.06.2022 KW - Liquid Hydrogen KW - LH2 KW - Release KW - RPT KW - Rapid Phase Transition PY - 2022 DO - https://doi.org/10.3303/CET2290091 SN - 2283-9216 VL - 90 SP - 541 EP - 546 PB - AIDIC CY - Milano AN - OPUS4-55324 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Vorstellung des Konzeptes und der Ziele des Arbeitskreises „Atmosphärische Korrosion“ N2 - Der Vortrag wurde im Rahmen der konstituierenden Sitzung des Arbeitskreises "Atmosphärische Korrosion" der GfKORR - Gesellschaft für Korrosionsschutz e.V. gehalten. Er stellt die zur Diskussion stehenden Fragestellungen und Herausforderungen im Bereich der atmosphärischen Korrosion zusammen, denen sich der neue Arbeitskreis widmen wird. T2 - Konstituierende Sitzung des GfKORR-Arbeitskreises „Atmosphärische Korrosion“ CY - Frankfurt a. M., Germany DA - 19.09.2022 KW - Atmosphärische Korrosion KW - Korrosion KW - Korrosionsschutz PY - 2022 AN - OPUS4-55772 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Ferrero, Fabio A1 - Zeps, Robert T1 - Simulation and experimental determination of the self ignition of tetrafluoroethylene in a 100-dm³-autoclave N2 - The gaseous TFE is a monomer which is used to form PTFE, also known as Teflon®, by a polymerisation process at elevated conditions of temperature and pressure. TFE belongs to the group of chemically instable gases which are able to decompose under specific conditions releasing a huge amount of heat comparable to a gas explosion of flammable gases. Due to several incidents in PTFE – production plants the investigation of the safety related properties of TFE at elevated condition was necessary and resulted in a research project at BAM which is subsidized by the PlasticsEurope association. In a first stage the pressure dependence of the Minimum Ignition Temperature for Decomposition (MITD) was determined in the range of 0.5 MPa - 3 MPa in small autoclaves with volumes of 0.2 dm³ and 3 dm³. These results were used to validate the numerical model and were found to correlate quite well with the simulated values. Nevertheless the applicability had to be confirmed for larger volumes as well. Therefore a heat able 100-dm³-autoclave was constructed and build to determine the MITD in the range of 0.5 MPa to 1.1 MPa. T2 - 8th European Congress of Chemical Engineering CY - Berlin, Germany DA - 25.09.2011 KW - Ignition temperature KW - Self decomposition KW - MITD KW - TFE KW - Tetrafluoroehtylene PY - 2011 N1 - Das Poster hat den Adolf-Martens-Preis im Bereich "Safety Engineering" erhalten. - The poster was awarded the Adolf Martens Prize in the section "Safety Engineering". N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-55754 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Krause, Martin A1 - Wiggenhauser, Herbert T1 - Praxiseinsatz eines Ultraschall-Verfahrens zur Strukturuntersuchung von Betonbauteilen N2 - Einsatzbereiche des Meßsystems: - Ortung von Strukturelementen oder Verdichtungsmängeln in Beton - Dickenbestimmung von Bauteilen bei einseitiger Zugänglichkeit - Messung des Haftverbundes bei mehrschichtigen Bauteilen Auswerteverfahren: - Prinzip der laufzeitkorrigierten Überlagerung Vorteile: - Automatischer Meßablauf durch Array-Technik - Flexibler Einsatz durch lange Kabelverbindungen zwischen Prüfkopfarray und Meßapparatur T2 - Fachtagung Bauwerksdiagnose - Praktische Anwendungen Zerstörungsfreier Prüfungen CY - Munich, Germany DA - 21.01.1999 KW - Dickenmessung KW - Sohlplatte KW - Leerrohre PY - 1999 AN - OPUS4-36521 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zeps, Robert A1 - Rosenow, B. A1 - Kluge, Martin A1 - Blanchard, R. A1 - Holtappels, Kai T1 - Druckentlastungsvorgänge in großvolumigen Behältern T2 - 14. Kolloquium zur chemischen und physikalischen Sicherheitstechnik (BAM-PTB-Kolloquium) N2 - Es wurden Druckentlastungsvorgänge in einem 5 m³ Autoklav mit einem L/D-Verhältnis von 1,14 nach der Zündung von Methan-Luft-Gemischen untersucht. Schwerpunkt der Arbeit war die Bestimmung der Explosionsdrücke, der zeitlichen Druckanstiege bzw. der KG-Werte und der reduzierten Explosionsdrücke in Abhängigkeit der Methankonzentration. Im geschlossenen Behälter wurden die Explosionsdrücke und zeitlichen Druckanstiege für Methan-Luft-Gemische mit Methankonzentrationen von 5,9 Vol-% bis 13,5 Vol-% ermittelt. Die Ergebnisse zeigen gute Übereinstimmung mit den Literaturwerten. Weiter wurden Druckentlastungsversuche mit einer kreisrunden Entlastungsfläche von 0,011 m² und einer Druckentlastungsfolie mit einem statischen Ansprechdruck von 1,94 bar durchgeführt. Hierbei wurden Gemische mit Methankonzentrationen von 5,9 Vol-% bis 14,3 Vol-% untersucht. Dabei zeigte sich, dass die vergleichsweise kleine Entlastungsfläche nur dann zu reduzierten Explosionsdrücken gleich dem statischen Ansprechdruck der Berstfolie führte, wenn die Methankonzentration ≤ 5,9 Vol-% oder ≥ 14,0 Vol-% betrug. Bei allen anderen untersuchten Methankonzentrationen führten die durch die Druckentlastung induzierten Turbulenzen zu einer Beschleunigung der Verbrennungsreaktion und zu Explosionsdrücken vergleichbar denen im geschlossenen Behälter. T2 - 14. Kolloquium zur chemischen und physikalischen Sicherheitstechnik (BAM-PTB-Kolloquium) CY - Berlin, Germany DA - 14.06.2016 KW - Druckentlastung KW - Up-Scale KW - Deflagration KW - Sicherheitstechnik PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 VL - 2016 SP - 21 EP - 28 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-37176 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter A1 - Frost, K. T1 - Interlaboratory Test 2015 "EN 15188" - Ergebnisse und Schlussfolgerungen N2 - Ergebnisse des Ringversuches "DIN EN 15188: Determination of the spontaneous ignition behaviour of dust acuumulations T2 - Industriearbeitskreis "Brennbare Stäube" CY - Wolfgang-Hanau, Germany DA - 28.06.2016 KW - Selbstentzündung KW - Ringversuch KW - Methodenvalidierung KW - Messunsicherheit PY - 2016 AN - OPUS4-37196 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Emmerling, Franziska T1 - Time- & spatial-resolved X-ray absorption fine structure (XAFS) spectroscopy in a single-shot – new analytical possibilities for in situ material characterization JF - Journal of Synchrotron Radiation N2 - A new concept that comprises both time- and lateral-resolved X-ray absorption fine-structure information simultaneously in a single shot is presented. This uncomplicated set-up was tested at the BAMline at BESSY-II (Berlin, Germany). The primary broadband beam was generated by a double multilayer monochromator. The transmitted beam through the sample is diffracted by a convexly bent Si (111) crystal, producing a divergent beam. This, in turn, is collected by either an energy-sensitive area detector, the so-called color X-ray camera, or by an area-sensitive detector based on a CCD camera, in θ-2θ geometry. The first tests were performed with thin metal foils and some iron oxide mixtures. A time resolution of lower than 1 s together with a spatial resolution in one dimension of at least 50 µm is achieved. KW - Time resolution KW - Single-shot XAFS PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-370892 DO - https://doi.org/10.1107/S1600577516003969 SN - 1600-5775 IS - 23 SP - 769 EP - 776 PB - International Union of Crystallography CY - Chester, UK AN - OPUS4-37089 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin-Sanchez, Pedro Maria A1 - Gorbushina, Anna A1 - Kunte, Hans-Jörg A1 - Toepel, Jörg T1 - A novel qPCR protocol for the specific detection and quantification of the fuel-deteriorating fungus Hormoconis resinae JF - Biofouling N2 - A wide variety of fungi and bacteria are known to contaminate fuels and fuel systems. These microbial contaminants have been linked to fuel system fouling and corrosion. The fungus Hormoconis resinae, a common jet fuel contaminant, is used in this study as a model for developing innovative risk assessment methods. A novel qPCR protocol to detect and quantify H. resinae in, and together with, total fungal contamination of fuel systems is reported. Two primer sets, targeting the markers RPB2 and ITS, were selected for their remarkable specificity and sensitivity. These primers were successfully applied on fungal cultures and diesel samples demonstrating the validity and reliability of the established qPCR protocol. This novel tool allows clarification of the current role of H. resinae in fuel contamination cases, as well as providing a technique to detect fungal outbreaks in fuel systems. This tool can be expanded to other well-known fuel-deteriorating microorganisms. KW - Microbial contamination KW - Real-time quantitative PCR KW - Microbiologically influenced corrosion; KW - Diesel biodeterioration KW - Fouling KW - Indicator PY - 2016 DO - https://doi.org/10.1080/08927014.2016.1177515 SN - 0892-7014 VL - 32 IS - 6 SP - 635 EP - 644 PB - Taylor & Francis Group CY - Abingdon AN - OPUS4-37337 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Coutinho, M.L. A1 - Miller, A. Z. A1 - Martin-Sanchez, Pedro Maria A1 - Mirao, J. A1 - Gomez-Bolea, A. A1 - Machado-Moreira, B. A1 - Cerqueira-Alves, L. A1 - Jurado, V. A1 - Saiz-Jimenez,, C. A1 - Lima, A. A1 - Phillips, A. J. L. A1 - Pina, F. A1 - Macedo, M. F. T1 - A multiproxy approach to evaluate biocidal treatments on biodeteriorated majolica glazed tiles JF - Environmental Microbiology N2 - The Fishing House located on the grounds of the Marquis of Pombal Palace, Oeiras, Portugal, was built in the 18th century. During this epoch, Portuguese gardens, such as the one surrounding the Fishing House, were commonly ornamented with glazed wall tile claddings. Currently, some of these outdoor tile panels are covered with dark colored biofilms, contributing to undesirable aesthetic changes and eventually inducing chemical and physical damage to the tile surfaces. Phylogenetic analyses revealed that the investigated biofilms are mainly composed of green algae, cyanobacteria and dematiaceous fungi. With the aim of mitigating biodeterioration, four different biocides (TiO2 nanoparticles, Biotin® T, Preventol® RI 80 and Albilex Biostat®) were applied in situ to the glazed wall tiles. Their efficacy was monitored by visual examination, epifluorescence microscopy and DNA-based analysis. Significant changes in the microbial community composition were observed 4 months after treatment with Preventol® RI 80 and Biotin® T. Although the original community was inactivated after these treatments, an early stage of re-colonization was detected 6 months after the biocide application. TiO2 nanoparticles showed promising results due to their self-cleaning effect, causing the detachment of the biofilm from the tile surface, which remained clean 6 and even 24 months after biocide application. KW - Biofilm KW - Glazed tiles KW - Fungi PY - 2016 DO - https://doi.org/10.1111/1462-2920.13380 SN - 1462-2912 SN - 1462-2920 VL - 18 IS - 12 SP - 4794 EP - 4816 PB - Society for Applied Microbiology and John Wiley & Sons Ltd AN - OPUS4-37380 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Menzel, M. A1 - Scharf, O. A1 - Novak, S. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Hischenhuber, P. A1 - Buzanich, Günter A1 - Meyer, A. A1 - Lopez, V. A1 - McIntosh, K. A1 - Streli, C. A1 - Havrilla, G. A1 - Fittschen, U. T1 - Shading in TXRF: calculations and experimental validation using a color X-ray camera JF - Journal of Analytical Atomic Spectrometry N2 - Absorption effects in total reflection X-ray fluorescence (TXRF) analysis are important to consider, especially if external calibration is to be applied. With a color X-ray camera (CXC), that enables spatially and energy resolved XRF analysis, the absorption of the primary beam was directly visualized for mL-droplets and an array of pL-droplets printed on a Si-wafer with drop-on-demand technology. As expected, deposits that are hit by the primary beam first shade subsequent droplets, leading to a diminished XRF signal. This shading effect was quantified with enhanced precision making use of sub-pixel analysis that improves the spatial resolution of the camera. The measured absorption was compared to simulated results using three different model calculations. It was found they match very well (average deviation < 10%). Thus errors in quantification due to absorption effects can be accounted for in a more accurate manner. KW - absorption KW - X-ray Fluorescence analysis PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-359000 DO - https://doi.org/10.1039/C5JA00127G IS - 10 SP - 2184 EP - 2193 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-35900 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Emmerling, Franziska ED - de Oliveira Guilherme Buzanich, Ana ED - Strange, R. W. T1 - Time- and spatial-resolved XAFS spectroscopy in a single shot: new analytical possibilities for in situ material characterization JF - Journal of Synchrotron Radiation N2 - A new concept that comprises both time- and lateral-resolved X-ray absorption fine-structure information simultaneously in a single shot is presented. This uncomplicated set-up was tested at the BAMline at BESSY-II (Berlin, Germany). The primary broadband beam was generated by a double multilayer monochromator. The transmitted beam through the sample is diffracted by a convexly bent Si (111) crystal, producing a divergent beam. This, in turn, is collected by either an energy-sensitive area detector, the so-called color X-ray camera, or by an area-sensitive detector based on a CCD camera, in θ–2θ geometry. The first tests were performed with thin metal foils and some iron oxide mixtures. A time resolution of lower than 1 s together with a spatial resolution in one dimension of at least 50 mm is achieved. KW - Single-shot XAFS KW - Time resolution PY - 2016 UR - http://scripts.iucr.org/cgi-bin/paper?S1600577516003969 DO - https://doi.org/10.1107/S1600577516003969 SN - 1600-5775 VL - 23 SP - 769 EP - 776 PB - International Union of Crystallography CY - Liverpool, UK AN - OPUS4-35903 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hattwig, Martin T1 - Der Schutz gegen Staubexplosionen und Staubbrände bei der Vermahlung und Lagerung von Produkten aus tierischen Abfällen JF - Die Fleischmehlindustrie PY - 1982 SN - 1437-949X VL - 34 IS - 1 SP - 9 EP - 16 PB - Wirtschaftsdienst d. Fleischmehlindustrie CY - Bonn AN - OPUS4-36226 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hattwig, Martin T1 - Entstehung und Auswirkungen von Raumexplosionen JF - Amts- und Mitteilungsblatt der Bundesanstalt für Materialprüfung PY - 1982 SN - 0340-7551 VL - 12 IS - 4 SP - 357 EP - 365 CY - Berlin AN - OPUS4-36227 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hattwig, Martin A1 - Wandrey, Peter-Andreas ED - Ziegler, Kurt ED - Becker, Gerhard Wilhelm T1 - Sicherheit bei der Herstellung und beim Transport oxidierend wirkender Stoffe und organischer Per-Verbindungen T2 - Vortragsveranstaltung mit Ausstellung und Großversuchen zum Thema "Grundsätze der Chemischen Sicherheitstechnik und ihre Anwendung in der Praxis" : Berichte T2 - Grundsätze der Chemischen Sicherheitstechnik und ihre Anwendung in der Praxis CY - Berlin, Germany DA - 08.10.1981 PY - 1982 SP - 61 EP - 70 CY - Berlin AN - OPUS4-36229 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hattwig, Martin ED - Ziegler, Kurt ED - Becker, Gerhard Wilhelm T1 - Messung der Rückstoßkraft bei der Explosionsdruckentlastung T2 - Vortragsveranstaltung mit Ausstellung und Großversuchen zum Thema "Grundsätze der Chemischen Sicherheitstechnik und ihre Anwendung in der Praxis" : Berichte T2 - Grundsätze der Chemischen Sicherheitstechnik und ihre Anwendung in der Praxis CY - Berlin, Germany DA - 08.10.1981 PY - 1982 SP - 91 EP - 92 CY - Berlin AN - OPUS4-36222 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hattwig, Martin ED - Ziegler, Kurt ED - Becker, Gerhard Wilhelm T1 - Sicherheitstechnische Probleme bei Detonationen von Gasen T2 - Vortragsveranstaltung mit Ausstellung und Großversuchen zum Thema "Grundsätze der Chemischen Sicherheitstechnik und ihre Anwendung in der Praxis" : Berichte T2 - Grundsätze der Chemischen Sicherheitstechnik und ihre Anwendung in der Praxis CY - Berlin, Germany DA - 08.10.1981 PY - 1982 SP - 103 EP - 104 CY - Berlin AN - OPUS4-36224 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Wittig, Günther A1 - Maser, Dieter T1 - Ein Impuls-Wirbelstromprüfsystem mit rechnergestützter Erfassung und Auswertung der Meßsignale JF - Materialprüfung : MP PY - 1982 SN - 0025-5300 VL - 24 IS - 8 SP - 282 EP - 287 PB - Hanser CY - München AN - OPUS4-36415 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Reinemann, Steffi A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Optimierung industrieller Korundschleifprozesse zur Sicherstellung der Korrosionsbeständigkeit nichtrostender Stähle N2 - Der Vortrag verdeutlicht die Grundlagen der Korrosionsbeständigkeit nichtrostender Stähle und beschäftigt sich vorwiegend mit dem Einfluss der Schleifbearbeitung auf das Korrosionsverhalten. Das AiF-Vorhaben 18823 N/1 wird vorgestellt und erste Ergebnisse zum Einfluss von Schleifprozessen auf die Korrosionsbeständigkeit nichtrostender Stähle werden präsentiert. Darüber hinaus werden Empfehlungen für Verarbeiter nichtrostender Stähle gegeben. T2 - Kursleiterfortbildung 2016 der Informationsstelle Edelstahl Rostfrei CY - Berlin, Germany DA - 26.09.2016 KW - Korrosionsbeständigkeit KW - Corrosion resistance KW - Schleifbearbeitung KW - Surface grinding KW - Nichtrostende Stähle KW - Stainless steels PY - 2016 AN - OPUS4-37517 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, A. T1 - Corrosion investigations by using gel-type electrolytes T2 - EUROCORR European Corrosion Congress 2016 - Conference Proceedings N2 - This contribution will show that gel-type electrolytes influence protective layers on zinc coatings considerably less than typical bulk electrolytes. Different zinc coatings are investigated, their naturally formed protective layers are electrochemically characterized and corrosion relevant values are determined by using a gel pad based on polysaccharide. From the results it is evident that gel-type electrolytes represent a viable and promising field in corrosion research. T2 - EUROCORR European Corrosion Congress 2016 CY - Montpellier, France DA - 11.09.2016 KW - Corrosion investigations KW - Gel-type electrolytes KW - Zinc coatings PY - 2016 SP - Paper P-56097 AN - OPUS4-37546 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bender, S. A1 - Babutzka, Martin A1 - Kirmaier, L. T1 - Korrosionsschutz schnell untersuchen JF - Farbe und Lack N2 - Ergebnisse auf einen Blick Elektrochemische Messungen in wässrigen Lackdispersionen konnten erfolgreich durchgeführt werden und bieten vielversprechende Ergebnisse. Es können zeitnah Aussagen zum Auflösungsverhalten des Substrates in Abhängigkeit von verschiedenen Korrosionsschutzpigmenten, dispergiert im wässrigen Bindemittel, getroffen werden. Somit ist eine Vorauswahl/Screening verschiedener Korrosionsschutzpigmente in Kombination mit dem wässrigen Bindemittel möglich, welche mit konventioneller Korrosionsprüfung bestätigt werden konnte. Das Erkennen und Nutzen synergetischer Wechselwirkungen hilft bei der Entwicklung neuartiger zinkfreier Pigmente. KW - Lackdispersionen KW - Elektrochemische Rauschanalyse KW - Korrosionsschutz PY - 2014 SN - 0014-7699 VL - 120 IS - 5 SP - 22 EP - 28 PB - Vincentz CY - Hannover AN - OPUS4-30773 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ried, Peter A1 - Gaber, Martin A1 - Müller, Ralf A1 - Deubener, J. T1 - Hydrogen permeability of a barium-aluminoborosilicate glass - A methodical approach JF - Journal of non-crystalline solids N2 - The H2 effusion from H2 saturated glass powders, H2 permeation through the wall of blown glass bulbs, and H2 permeation through the wall of glass capillaries were applied to evaluate the permeability of hydrogen gas in a barium-aluminoborosilicate (BABS) glass. To validate these methods, two commercial glasses (vitreous silica and borosilicate) were used as a reference. Permeation values obtained from the different experiments agreed within a factor of 3 or less. The H2 permeability of BABS glass at temperatures close to ambient was found to be at least 3 orders of magnitude below that of borosilicate and silica glasses. The powder method, which requires minimal sample preparation efforts, turned out to provide easy access to the measurement of H2 permeability of glasses down to P = 3.9 × 10- 21 mol s- 1 Pa- 1 m- 1. KW - Hydrogen gas KW - Permeability KW - Solubility KW - Diffusivity KW - Aluminoborosilicate glass PY - 2014 DO - https://doi.org/10.1016/j.jnoncrysol.2014.04.006 SN - 0022-3093 VL - 394-395 SP - 43 EP - 49 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-30720 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Erzeugung korrosionoptimierter Oberflächen bei nichtrostenden Stählen mit industriellen Schleifprozessen T2 - Arbeitskreissitzung der GfKORR "Corrosion Monitoring und Prüf- und Untersuchungsmethoden" T2 - Arbeitskreissitzung der GfKORR "Corrosion Monitoring und Prüf- und Untersuchungsmethoden" CY - Heligoland, Germany DA - 2014-05-12 PY - 2014 AN - OPUS4-30744 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg A1 - Hoffmann, Martin A1 - Scherer, Florian A1 - Schoppa, André A1 - Szczepaniak, Mariusz T1 - Slow burst testing of samples as a method for quantification of composite cylinder degradation JF - International journal of hydrogen energy N2 - The current practise to focus periodic retesting of composite cylinders primarily on the hydraulic pressure test has to be evaluated as critical. The test itself always causes a certain amount of micro damage to the cylinders but does not necessarily deliver sufficient and evaluable information. Thus BAM Federal Institute of Materials Research and Testing (Germany) moves the focal point to a new approach for validation of composite cylinders, based on destructive sample tests parallel to operation. Statistical assessment of results of these destructive tests is employed for the estimation of remaining safe service life, based on reliability demands. The estimated service life is also used for the determination of re-test periods of the examined population of composite cylinders. An essential aspect of this approach is the validation of current residual strength and its prediction at any point of service life. In cases of gas cylinders with very high cycle strength, residual strength cannot be quantified statistically by means of hydraulic load cycles. As a replacement, creep tests or burst tests may be employed. BAM suggests the 'slow burst test SBT' as a combination of these two test procedures. This is a compromise between the practicability of the (conventional) burst test and the practical relevance of sustained loads during service, to be tested in creep rupture tests. In this paper, a variety of 99 burst results of a cylinder design type used for breathing apparatus (CFRP with PE-liner) is evaluated. The influence of test procedure parameters and nature and intensity of artificial ageing on the test sample strength are analysed statistically. This leads to an evaluation of different procedures of artificial ageing and the recommendation to substitute conventional burst tests by slow burst tests for the assessment of composite pressure receptacles. KW - Slow burst test KW - Sample testing KW - Residual strength KW - Scatter KW - Mean value KW - Degradation KW - Pressure rate PY - 2014 DO - https://doi.org/10.1016/j.ijhydene.2014.04.016 SN - 0360-3199 VL - 39 IS - 35 SP - 20522 EP - 20530 PB - Elsevier CY - Oxford AN - OPUS4-30732 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Kwangvitayanon, Yolada A1 - Krietsch, Arne A1 - Klippel, Alexander A1 - Schröder, Volkmar T1 - Validation of the New Ignition Source "Exploding Wire" for Dust Explosion Testing in the 20-l-Sphere T2 - Hazards 24 T2 - Hazards 24 CY - Edinburgh, Scotland DA - 2014-05-07 PY - 2014 AN - OPUS4-30690 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Curado, Jessica A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Guttler, R.A.S. A1 - Rizzutto, M.A. T1 - μ-SRXRF characterization of Brazilian emeralds JF - Journal of physics / Conference series N2 - The aim of the present study is to characterize emeralds from different mines of Brazil by using Synchrotron Radiation X-ray Fluorescence Microanalysis (µ-SRXRF). The advantage of this technique is that we can analyze a homogeneous, inclusion free area of the stone with the microbeam to distinguish the elemental fingerprint according to the provenance of the emerald. A total of 47 samples belonging to 5 different Brazilian mines were studied in this work and 28 elements were identified. By means of Principal Component Analysis (PCA) it is possible to build different groups according to the provenance of the stones, which allows to assign samples of unknown origin to the according mine. T2 - 22nd International congress on X-ray optics and microanalysis CY - Hamburg, Germany DA - 02.09.2013 KW - µ-SRXRF KW - BAMline KW - Emeralds KW - Geoscience PY - 2014 DO - https://doi.org/10.1088/1742-6596/499/1/012016 SN - 1742-6588 SN - 1742-6596 VL - 499 SP - 012016-1 EP - 012016-5 PB - IOP Publ. CY - Bristol, UK AN - OPUS4-30541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisenacher, Germar A1 - Scheidemann, Robert A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard T1 - Crushing characteristics of spruce wood used in impact limiters of type B packages T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials (Proceedings) T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials CY - San Francisco, CA, USA DA - 2013-08-18 KW - Spruce wood KW - Crush test KW - Impact limiter PY - 2013 SP - 1 EP - 10(?) PB - Omnipress AN - OPUS4-30219 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reiche, I. A1 - Muller, K. A1 - Alberic, M. A1 - Scharf, O. A1 - Wahning, A. A1 - Bjeoumikhov, A. A1 - Radtke, Martin A1 - Simon, R. T1 - Discovering vanished paints and naturally formed gold nanoparticles on 2800 years old Phoenician ivories using SR-FF-microXRF with the color X-ray camera JF - Analytical chemistry N2 - Phoenician ivory objects (8th century B.C., Syria) from the collections of the Badisches Landesmuseum, Karlsruhe, Germany, have been studied with full field X-ray fluorescence microimaging, using synchrotron radiation (SR-FF-microXRF). The innovative Color X-ray Camera (CXC), a full-field detection device (SLcam), was used at the X-ray fluorescence beamline of the ANKA synchrotron facility (ANKA-FLUO, KIT, Karlsruhe, Germany) to noninvasively study trace metal distributions at the surface of the archeological ivory objects. The outstanding strength of the imaging technique with the CXC is the capability to record the full XRF spectrum with a spatial resolution of 48 µm on a zone of a size of 11.9 × 12.3 mm² (264 × 264 pixels). For each analyzed region, 69696 spectra were simultaneously recorded. The principal elements detected are P, Ca, and Sr, coming from the ivory material itself; Cu, characteristic of pigments; Fe and Pb, representing sediments or pigments; Mn, revealing deposited soil minerals; Ti, indicating restoration processes or correlated with Fe sediment traces; and Au, linked to a former gilding. This provides essential information for the assessment of the original appearance of the ivory carvings. The determined elemental maps specific of possible pigments are superimposed on one another to visualize their respective distributions and reconstruct the original polychromy and gilding. Reliable hypotheses for the reconstruction of the original polychromy of the carved ivories are postulated on this basis. KW - SR-FF-microXRF KW - Elemental imaging KW - Ivory KW - Paints KW - Au NPs KW - Egyptian blue KW - Fe PY - 2013 DO - https://doi.org/10.1021/ac4006167 SN - 0003-2700 SN - 1520-6882 VL - 85 IS - 12 SP - 5857 EP - 5866 PB - American Chemical Society CY - Washington, DC AN - OPUS4-30222 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Reiche, I. A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Guerra, M.F. T1 - Beyond the Great Wall: Gold of the silk roads and the first empire of the Steppes JF - Analytical chemistry N2 - Fingerprinting ancient gold work requires the use of nondestructive techniques with high spatial resolution (down to 25 µm) and good detection limits (micrograms per gram level). In this work experimental setups and protocols for synchrotron radiation induced X-ray fluorescence (SRXRF) at the BAMline of the Berlin electron storage ring company for synchrotron radiation (BESSY) in Berlin for the measurement of characteristic trace elements of gold are compared considering the difficulties, shown in previous works, connected to the quantification of Pt. The best experimental conditions and calculation methods were achieved by using an excitation energy of 11.58 keV, a silicon drift chamber detector (SDD) detector, and pure element reference standards. A detection limit of 3 µg/g has been reached. This newly developed method was successfully applied to provenancing the Xiongnu gold from the Gol Mod necropolis, excavated under the aegis of the United Nations Educational, Scientific and Cultural Organization (UNESCO). The composition of the base alloys and the presence of Pt and Sn showed that, contrary to what is expected, the gold foils from the first powerful empire of the steppes along the Great Wall were produced with alluvial gold from local placer deposits located in Zaamar, Boroo, and in the Selenga River. KW - Synchrotron radiation KW - X-ray fluorescence KW - Limit of detection KW - Platinum KW - Silicon drift detector KW - SR-microXRF KW - Elemental imaging KW - Gold PY - 2013 DO - https://doi.org/10.1021/ac3025416 SN - 0003-2700 SN - 1520-6882 VL - 85 IS - 3 SP - 1650 EP - 1656 PB - American Chemical Society CY - Washington, DC AN - OPUS4-30224 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rakotondrajoa, Andrianiaina A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Vincze, L. A1 - Raboanary, R. T1 - Improvement of PLS regression-based XRF spectroscopy quantification using multiple step procedure and Monte Carlo simulation JF - X-ray spectrometry N2 - Partial least squares (PLS) regression-based methods have been proven to be a good alternative for quantification in X-ray fluorescence spectroscopy. These methods are fast and easy to use though giving satisfactory results under certain conditions. One of these conditions is the necessity of having a great number of spectra to build the model (training set). The choice of the constituent concentration range in the training set has a big influence on the accuracy of the model. Better accuracy is obtained if the model is built in relatively narrow regions containing (or close to) the real concentration value. In the present work, Monte Carlo (MC) simulated spectra are used to form the training set. The advantage to use MC generated training spectra is the unlimited availability of perfect standards. This paper aims to improve the accuracy of the method by introducing a multiple step procedure in order to build the PLS model using narrow concentration range close to (or containing) the real concentration values in the samples to be measured. This approach consists of an initial guess of the constituents' concentrations and a preliminary PLS model before building the final model. The prediction of ten MC simulated alloy standard samples containing Ti, Mn, Fe, Co, Cu, Zn, Sr, Zr, and Mo using this method allowed to have average relative prediction errors less than 5% for elements with narrow concentration ranges. KW - SR-microXRF KW - Quantification KW - PLS KW - Monte Carlo PY - 2013 DO - https://doi.org/10.1002/xrs.2479 SN - 0049-8246 VL - 42 IS - 4 SP - 183 EP - 188 PB - Wiley CY - Chichester AN - OPUS4-30225 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lahiri, D. A1 - Sharma, S.M. A1 - Verma, A.K. A1 - Vishwanadh, B. A1 - Dey, G.K. A1 - Schumacher, G. A1 - Scherb, T. A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe A1 - Radtke, Martin A1 - Banerjee, S. T1 - Investigation of short-range structural order in Zr69.5Cu12Ni11Al7.5 and Zr41.5Ti41.5Ni17 glasses, using X-ray absorption spectroscopy and ab initio molecular dynamics simulations JF - Journal of synchrotron radiation N2 - Short-range order has been investigated in Zr69.5Cu12Ni11Al7.5 and Zr41.5Ti41.5Ni17 metallic glasses using X-ray absorption spectroscopy and ab initio molecular dynamics simulations. While both of these alloys are good glass formers, there is a difference in their glass-forming abilities (Zr41.5Ti41.5Ni17 > Zr69.5Cu12Ni11Al7.5). This difference is explained by inciting the relative importance of strong chemical order, icosahedral content, cluster symmetry and configuration diversity. KW - Multi-component alloy KW - Glass-forming ability KW - XAFS KW - Local structure KW - AIMD simulation PY - 2014 DO - https://doi.org/10.1107/S1600577514017792 SN - 0909-0495 SN - 1600-5775 VL - 21 IS - 6 SP - 1296 EP - 1304 PB - Blackwell Publishing CY - Oxford AN - OPUS4-31837 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Wie man Brand- und Explosionsgefahren durch Stäube/chemische Verbindungen einschätzt und begegnet T2 - Förderprozess-Foren 2014 T2 - Förderprozess-Foren 2014 CY - Würzburg, Deutschland DA - 2014-11-18 PY - 2014 AN - OPUS4-32113 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Ringversuch Messunsicherheit DIN EN 15188/Ergebnisse INS Projekt "Explodierender Draht" als alternative Zündquelle für die 20-l-Kugel T2 - 61. Industriearbeitskreis "Brennbare Stäube" T2 - 61. Industriearbeitskreis "Brennbare Stäube" CY - Ludwigshafen, Deutschland DA - 2014-06-24 PY - 2014 AN - OPUS4-32115 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klippel, Alexander A1 - Schmidt, Martin A1 - Mücke, Olaf A1 - Krause, U. T1 - Dust concentration measurements during filling of a silo and CFD modeling of filling processes regarding exceeding the lower explosion limit JF - Journal of loss prevention in the process industries N2 - Measurement and numerical simulation of local dust concentrations over time in a vessel can only be done with some uncertainty due to the complexity of the behavior of dust/air mixtures. Dust concentration was measured in a 50 m³ vessel and compared to simulations with a commercial CFD code. A 50 m³ silo was used with two different filling methods. In one setup dust was conveyed with pneumatic filling at the top. The other filling was done with pressurized air and a homogenous injection via eight nozzles. Experiments were repeated three to four times with two kinds of dusts and the results were used to evaluate reproducibility of dust concentration measurements over time in a vessel depending on the filling method. Dust concentrations over time varied up to 30% from the average for homogenous injection and even more for pneumatic filling. Numerical investigations were done with maize starch. Measured concentrations were compared to simulated ones with the commercial CFD code ANSYS CFX R14 using an Euler/Lagrange approach. Drag force, turbulent dispersion force, particle size distribution, particle surface area and particle/particle interaction were modeled. A general agreement of measurement and simulation was achieved. Numerical simulations of filling processes were used to predict parts of the vessel where the lower explosion limit is reached and exceeded. This could help to improve dust explosion protection, if it is used to find configurations where the dust concentration exceeds the lower explosion limit only in small parts of the vessel during filling, e.g. using different injection points or injection angles. The volume where LEL is reached or exceeded in a 50 m³ silo is shown for pneumatic and homogenous filling. Volume of combustible atmosphere in the vessel over time is compared for two pneumatic filling configurations and one worst-case homogenous injection configuration. KW - CFD KW - Euler/Lagrange approach KW - Dust explosion protection KW - Dust concentration measurement KW - Dust explosion KW - Dustiness KW - Dispersion KW - Venting PY - 2014 DO - https://doi.org/10.1016/j.jlp.2014.02.006 SN - 0950-4230 SN - 1873-3352 VL - 29 SP - 122 EP - 137 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-30330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Linnemann, Konrad A1 - Schubert, Sven A1 - Ballheimer, Viktor A1 - Sterthaus, Jens A1 - Droste, Bernhard T1 - Reflection on BAM mechanical design assessment of TN®24E spent fuel transport package T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials (Proceedings) N2 - TN®24 E, a new package design, was developed and applied for by Areva TN for German transport approval certificate. The certificate was issued by BfS, Federal Office for Radiation Protection, on 24th of July 2013. The package is designed as a dual purpose cask for transport and storage of up to 21 PWR spent fuel assemblies from German NPPs. BAM is the German competent authority responsible for the design assessment of RAM packages regarding mechanical and thermal safety cases, activity release analysis and all issues of quality assurance during manufacturing and operation of packages. Certain assessment experiences as well as new developments resulting from the BAM TN®24E approval procedure are presented. The mechanical safety case of the TN®24E is based mainly on finite element calculations, which were verified by the TN®81 1/3 scale drop test program performed at BAM. Thermal analyses rely upon calculations, while the activity release criterion is based upon leakage rate results of TN®81 drop tests. The BAM-GGR 012 guideline for the analysis of bolted lid and trunnion systems has been fully implemented. Due to requirements by BAM, AREVA TN developed a new assessment strategy for fracture mechanical evaluation of welding seams. The material qualification and documentation is also an important aspect of BAM assessment; the qualification of borated aluminum basket material, the determination of strength values for thermal aged hardened aluminum alloys for the basket or consideration of high burn-up fuel assemblies are remarkable issues in this context. In addition, the consideration of the material compatibility, especially taking into account a transport after 40 years of dry interim storage in German facilities, has gained significant importance in the licensing process of the TN®24E. Next to obvious mechanical issues such as the assessment of shell ovalization under 9 m drop test scenario and its impact on basket load, thermo-mechanical interactions had to be addressed in the safety case. Due to BAM requirements, AREVA TN performed a full thermo-mechanical analysis of the cask behavior under fire test conditions. T2 - PATRAM 2013 - 17th International symposium on the packaging and transportation of radioactive materials CY - San Francisco, CA, USA DA - 18.08.2013 KW - Transport KW - RAM KW - Radioactive material cask KW - Nuclear fuel PY - 2013 SP - 1 EP - 12 PB - Omnipress AN - OPUS4-30270 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin T1 - Experimental fire testingof impact limiter of transport package for radioactive material T2 - Fire Science Workshop T2 - Fire Science Workshop CY - Berlin, Germany DA - 2013-11-29 PY - 2013 AN - OPUS4-30977 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Self-ignition of bulk solids: laboratory tests - simulations - reality? T2 - Fire Science Workshop T2 - Fire Science Workshop CY - Berlin, Germany DA - 2013-11-29 PY - 2013 AN - OPUS4-30978 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kerner-Gang, Waltraut A1 - Gersonde, Martin T1 - Einfluß der Probenanzahl im Versuchsgefäß auf das Ergebnis bei Moderfäule-Prüfungen JF - Material und Organismen = Materials and organisms = Matériaux et organismes PY - 1981 SN - 0025-5270 VL - 16 IS - 4 SP - 281 EP - 302 PB - Duncker & Humblot CY - Berlin AN - OPUS4-31966 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Schmidt, Martin T1 - Brand- und Explosionsgefahren von Nanomaterialien T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube / 2014 N2 - Nanotechnologie gilt als die Wachstumsbranche der nächsten Jahrzehnte. Nicht zuletzt ist diese Entwicklung den veränderten Eigenschaften der Materialien im Nanometerbereich zuzuschreiben. Das anders geartete Verhalten solcher Stoffe und die daraus ableitbare Unkenntnis über die Interaktion dieser Materialien mit ihrer Umgebung erfordert zur Risikoabschätzung eine intensive Auseinandersetzung mit der Thematik. Aufgrund von Erfahrungen mit Stäuben mit Partikelgrößen im Mikrometerbereich ist bekannt, dass Stoffe mit abnehmender Partikelgröße kritischer einzustufen sind, da ihre Explosionsheftigkeit und Zündempfindlichkeit durch die Zunahme der reaktiven Oberfläche des Staubs zunimmt. Nachfolgend werden Ergebnisse von Versuchen mit nanoskalig hergestellten Metallstäuben präsentiert. Der Fokus dieser Studie lag darauf, möglichst das kritischste Brand- und Explosionsverhalten solcher Stäube zu erfassen T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Germany DA - 21.10.2014 KW - Brand- und Explosionsschutz KW - Nanostäube KW - Sicherheitstechnische Kenngrößen PY - 2014 SN - 978-3-18-092225-6 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2225 SP - 17 EP - 32 PB - VDI-Verl. CY - Düsseldorf AN - OPUS4-31934 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Martin A1 - Dackermann, U. A1 - Li, J. T1 - Elastic wave modes for the assessment of structural timber: ultrasonic echo for building elements and guided waves for pole and pile structures JF - Journal of civil structural health monitoring N2 - This paper presents the state-of-the-art of using non-destructive testing (NDT) methods based on elastic waves for the condition assessment of structural timber. Two very promising approaches based on the propagation and reflections of elastic waves are described. While the first approach uses ultrasonic echoes for the testing of wooden building elements, the second approach uses guided waves (GW) for the testing of timber pole and pile structures. The basic principle behind both approaches is that elastic waves induced in a timber structure will propagate through its material until they encounter a change in stiffness, cross-sectional area or density, at which point they will reflect back. By measuring the wave echoes, it is possible to determine geometric properties of the tested structures such as the back wall of timber elements or the underground length of timber poles or piles. In addition, the internal state of the tested structures can be assessed since damage and defects such as rot, fungi or termite attacks will cause early reflections of the elastic waves as well as it can result in changes in wave velocity, wave attenuation and wave mode conversion. In the paper, the principles and theory of using elastic wave propagation for the assessment of wooden building elements and timber pole/pile structures are described. The state-of-the-art in testing equipment and procedures is presented and detailed examples are given on the practical application of both testing approaches. Recent encouraging developments of cutting edge research are presented along with challenges for future research. KW - Elastic wave KW - Ultrasonic echo KW - SAFT (synthetic aperture focusing technique) KW - Guided wave KW - Timber structure KW - Timber pole KW - Impulse response KW - Condition assessment KW - Timber KW - Non-destructive testing KW - Ultrasouind PY - 2014 DO - https://doi.org/10.1007/s13349-014-0087-2 SN - 2190-5452 SN - 2190-5479 VL - 5 IS - 2 SP - 221 EP - 249 PB - Springer CY - Berlin; Heidelberg AN - OPUS4-31867 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Passivität und lokale Korrosionserscheinungen bei nichtrostenden Stählen T2 - Seminar Korrosion und Korrosionsschutz, Otto-von-Guericke-Universität Magdeburg T2 - Seminar Korrosion und Korrosionsschutz, Otto-von-Guericke-Universität Magdeburg CY - Magdeburg, Germany DA - 2014-11-07 PY - 2014 AN - OPUS4-31926 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Grundlagen der Korrosion T2 - Seminar Korrosion und Korrosionsschutz, Otto-von-Guericke-Universität Magdeburg T2 - Seminar Korrosion und Korrosionsschutz, Otto-von-Guericke-Universität Magdeburg CY - Magdeburg, Germany DA - 2014-10-24 PY - 2014 AN - OPUS4-31911 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hattwig, Martin T1 - Untersuchungen zum Rückstoss bei der Explosionsdruckentlastung JF - Chemische Rundschau PY - 1981 SN - 0009-2983 VL - 34 IS - 29 SP - 1 EP - 2,5 PB - AZ Fachverl. CY - Aarau AN - OPUS4-31881 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Scheid, Marc A1 - Schmidt, Martin T1 - Burning and explosion properties of metallic nano powders T2 - Hazards 24 Symposium (Proceedings) N2 - This paper describes experiences and results of experiments with several metallic dusts within the nanometer range. The nano dusts (aluminium, .iron, zinc, titanium and copper) were tested in a modified experimental Setup for the test apparatus 20-L sphere (also known as 20-L Siwek Chamber), that enables the test samples to be kept under inert atmospheric conditions nearly until ignition. This setup was already introduced in earlier papers by the authors. It was designed to allow the determination of safety characteristics of nano powders under most critical circumstances (e.g. minimisation of the influence of oxidation before the test itself). Furthermore the influence of passivation on explosion behaviour is investigated and additional tests with deposited dust were carried out to describe the burning behaviour of all dusts. For a better characterisation all samples were tested with a simultaneous thermal analysis (STA). To minimise the influence of oxidation all samples were handled at inert conditions until shortly before ignition or start of the test respectively. T2 - Hazards 24 Symposium CY - Edinburgh, UK DA - 07.05.2014 KW - Nano powder KW - Explosion protection KW - Nano materials PY - 2014 SN - 978-0-85295-582-6 N1 - Serientitel: IChemE Symposium Series – Series title: IChemE Symposium Series VL - 159 SP - 1 EP - 9 AN - OPUS4-30903 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Scheid, Marc A1 - Schmidt, Martin A1 - Krause, U. T1 - Explosion behaviour of metallic nano powders T2 - 10th International symposium on hazards, prevention, and mitigation of industrial explosions - X ISHPMIE (Proceedings) N2 - This paper describes experiences and results of experiments with several metallic dusts within the nanometer range. The nano dusts (aluminium, iron, zinc, titanium and copper) were tested in a modified experimental setup for the test apparatus 20 L-sphere (also known as 20-L Siwek Chamber), that enables the test samples to be kept under inert atmospheric conditions nearly until ignition. This setup was already introduced in earlier papers by the authors. It was designed to allow the determination of safety characteristics of nano powders under most critical circumstances (e.g. minimisation of the influence of oxidation before the test itself). Furthermore the influence of passivation on explosion behaviour is investigated and additional tests with deposited dust were carried out to describe the burning behaviour of all dusts. For a better characterisation all samples were tested with a simultaneous thermal analysis (STA). To minimise the influence of oxidation all samples were handled at inert conditions until shortly before ignition or start of the test respectively. T2 - X ISHPMIE - 10th International symposium on hazards, prevention, and mitigation of industrial explosions CY - Bergen, Norway DA - 10.06.2014 KW - Dust explosion KW - Nano dust KW - Ignition KW - Explosion protection PY - 2014 SN - 978-82-999683-0-0 SP - 1475 EP - 1485 AN - OPUS4-30938 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf A1 - Heyn, Andreas A1 - Fenker, M. A1 - Balzer, Martin T1 - Investigation on defect morphology and corrosion behaviour of TiMgN hard coatings on steel substrate T2 - EUROCORR 2014 - European corrosion congress N2 - Nitride hard coatings, such as Titanium nitride and chromium nitride coatings are widely used for applications focussing on wear protection and decorative purposes. Also these coatings are often applied on low alloyed steel substrates. The inevitable contact of the coated components with the environment through pores and coating defects bears the danger of corrosion of the steel substrate followed by further delamination of the coating and a loss of function of the component. A new attempt to increase the corrosion behaviour of those physically deposited hard coating systems is the implementation of magnesium. The positive effect of magnesium could be verified already electrochemically. Performed experiments on TiMgN have shown that corrosion resistance could drastically improved with increasing Mg content of the TiMgN up to 30 at% compared to steel substrates with applied titanium nitride hard coatings. Besides the clarification of the electrochemical and phenomenological effect of the magnesium on the corrosion behaviour, an additional aim of this work is the investigation of the coating defects, defect morphologies and their influence on the local corrosion behaviour. For this the incorporation of the magnesium and its effects on the coating material, the influence of coating growth related defects and the effect of the coating structure on the corrosion behaviour should be experimental examined by using innovative surface and material analysis methods such as FIB and TEM. Furthermore the evolution of the coating defects should be investigated by combing confocal microscopy with a new developed exposure test method using the electrochemical indication test KorroPad. The function of the KorroPad test, which was developed and patented [1] at the BAM for the detection of corrosion sensitive steel surfaces by indicating dissolution of iron ions [1], allows the detection and identification of critical coating defects for further microscopic investigation. Additional to that the KorroPad test simulates an accelerated exposure test by simultaneous absence of the disadvantages of typical short time exposure test like salt spray tests. Thus it allows a monitoring and analysis of the evolution of the critical coating defects and their influence on the local corrosion behaviour and the overall corrosion mechanisms. The results of this work should contribute to the development of new hard coatings with improved corrosion protection properties and also to a better understanding of the corrosion mechanisms of coated steel substrates. T2 - EUROCORR 2014 - European corrosion congress CY - Pisa, Italy DA - 08.09.2014 KW - Metallic coatings KW - Cathodic protection KW - Corrosion PY - 2014 SN - 978-3-89746-159-8 SP - O EP - 7473, 384 AN - OPUS4-31482 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone T1 - Brandtechnologische Untersuchungen zum Einfluss von Brandbeschleunigern auf den Verlauf von Raumbränden JF - Zeitschrift für Forschung, Technik und Management im Brandschutz / Vfdb, Vereinigung zur Förderung des Deutschen Brandschutzes e.V. N2 - Bei der Ermittlung von Brandursachen und bei der Rekonstruktion von Brandverläufen kommt der Frage, ob und wie bei der Entstehung und Entwicklung des betreffenden Brandes Brandbeschleuniger beteiligt waren, eine bedeutende Rolle zu. Dennoch stehen umfangreiche experimentelle Daten zu originalmaßstäblichen Raumbrandversuchen, die den Einfluss von Brandbeschleunigern untersuchen, oder zumindest beiläufig berücksichtigen, kaum bis nicht zur Verfügung. Dieser Artikel berichtet über eine originalmaßstäbliche Versuchsserie, die diesen Einfluss auf den Verlauf von Raumbränden zum Gegenstand hatte. Es zeigt sich, dass die Beteiligung von Brandbeschleunigern einen unwesentlichen Einfluss auf die Ausprägung einzelner brandtechnologischer Kenngrößen, wie Wärmefreisetzungsrate, Brandraumtemperatur, Kohlenmonoxidfreisetzung uvm. hat, sich die Zeitspannen zum Eintreten von Ereignissen oder zum Erreichen bestimmter Kriterien jedoch erheblich verändern. PY - 2014 SN - 1868-6540 IS - 2 SP - 68 EP - 71 PB - Ebner Verlag GmbH & Co. KG CY - Ulm AN - OPUS4-31488 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kim, Y.S. A1 - Li, Y.-C. A1 - Pitts, W.M. A1 - Werrel, Martin A1 - Davis, R.D. T1 - Rapid growing clay coatings to reduce the fire threat of furniture JF - ACS applied materials & interfaces N2 - Layer-by-layer (LbL) assembly coatings reduce the flammability of textiles and polyurethane foam but require extensive repetitive processing steps to produce the desired coating thickness and nanoparticle fire retardant content that translates into a fire retardant coating. Reported here is a new hybrid bi-layer (BL) approach to fabricate fire retardant coatings on polyurethane foam. Utilizing hydrogen bonding and electrostatic attraction along with the pH adjustment, a fast growing coating with significant fire retardant clay content was achieved. This hybrid BL coating exhibits significant fire performance improvement in both bench scale and real scale tests. Cone calorimetry bench scale tests show a 42% and 71% reduction in peak and average heat release rates, respectively. Real scale furniture mockups constructed using the hybrid LbL coating reduced the peak and average heat release rates by 53% and 63%, respectively. This is the first time that the fire safety in a real scale test has been reported for any LbL technology. This hybrid LbL coating is the fastest approach to develop an effective fire retardant coating for polyurethane foam. KW - Layer-by-layer assembly KW - Polyurethane foam KW - Sodium montmorillonite KW - Flame retardant KW - Real scale mockup PY - 2014 DO - https://doi.org/10.1021/am405259n SN - 1944-8244 SN - 0013-936X SN - 1944-8252 VL - 6 IS - 3 SP - 2146 EP - 2152 PB - ACS Publ. CY - Washington, DC, USA AN - OPUS4-31489 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisenacher, Germar A1 - Wille, Frank A1 - Droste, Bernhard A1 - Neumann, Martin T1 - Modeling of wood filled impact limiters for transport packages - 14111 T2 - WM2014 Conference (Proceedings) N2 - Packages for the transport of SNF and HLW are usually equipped with impact limiters to reduce the loads that result from the regulatory 9 m drop test. A common impact limiter design in Germany is a welded steel sheet structure filled with wood. The material wood is the main energy absorber, while the steel sheet provides the integrity of the impact limiter. The IAEA allows mechanical safety cases of transport packages to be carried out computationally, as long as the models used are reliable. In this context, a Finite Element (FE) modeling approach for wood and its application to impact limiters in the calculation of a 9 m drop test is presented. A user material model for wood was developed for the dynamic FE-Code LS-DYNA. Its features are based on a series of crush tests with spruce wood specimens. The model considers wood as a material with transversely isotropic properties, i.e. in the directions parallel and perpendicular to the fiber. The plastic material behavior depends on the state of stress. This has shown to be important to account for the lateral constraint of wood in impact limiters resulting from steel sheet encapsulation. Lateral constraint or respectively, a multiaxial stress state, increases the compression strength level of wood, limits the softening effect and increases the hardening effect. Lateral constraint also increases volumetric and reduces deviatoric deformation. The wood material model considers various hardening and softening characteristics via input flow curves. It considers effects of temperature and strain rate on strength as well. The development of a multi-surface yield criterion and a plastic potential that enables the user input of plastic Poisson's ratios were the challenges during the development of material model. A dynamic FE calculation of a horizontal drop test with an 18,000 kg test package was performed. The wood material model was used to model the wooden impact limiter inlays. The impact limiter deformation and the package deceleration were compared to the experimental drop test results to rate the performance of the wood material model. T2 - WM2014 Conference CY - Phoenix, Arizona, USA DA - 02.03.2014 KW - Transport package KW - Radioactive material KW - Spruce wood KW - Impact limiter KW - Material model KW - Finite element PY - 2014 SN - 978-0-9836186-3-8 SP - 1 EP - 10 AN - OPUS4-30653 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krietsch, Arne A1 - Schmidt, Martin A1 - Krause, U. T1 - Brand- und Explosionseigenschaften von nanoskalig hergestellten Stäuben JF - Technische Sicherheit N2 - Nanotechnologie gilt als die Wachstumsbranche der nächsten Jahrzehnte. Nicht zuletzt ist diese Entwicklung den veränderten Eigenschaften der Materialien im Nanometerbereich zuzuschreiben. Das anders geartete Verhalten solcher Stoffe und die daraus ableitbare Unkenntnis über die Interaktion dieser Materialien mit ihrer Umgebung erfordert zur Risikoabschätzung eine intensive Auseinandersetzung mit der Thematik. Aufgrund von Erfahrungen mit Stäuben mit Partikelgrößen im Mikrometerbereich ist bekannt, dass Stoffe mit abnehmender Partikelgröße kritischer einzustufen sind, da ihre Explosionsheftigkeit und Zündempfindlichkeit durch die Zunahme der reaktiven Oberfläche des Staubs zunimmt. Nachfolgend werden Ergebnisse von Versuchen mit nanoskalig hergestellten Metallstäuben präsentiert. Der Fokus dieser Studie lag darauf, möglichst das kritischste Brand- und Explosionsverhalten solcher Stäube zu erfassen. KW - Staubexplosion KW - Nanostäube KW - Sicherheitstechnische Kenngrößen PY - 2014 SN - 2191-0073 VL - 4 IS - 9 SP - 44 EP - 49 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-31395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, Andreas A1 - Rosemann, Paul A1 - Halle, Thorsten T1 - Influence of heat treatment on corrosion resistance of martensitic stainless steels 1.4034 and 1.4021 T2 - EUROCORR 2014 T2 - EUROCORR 2014 CY - Pisa, Italy DA - 2014-09-08 PY - 2014 AN - OPUS4-31400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Reinemann, Steffi A1 - Heyn, Andreas T1 - Nachweis von Verarbeitungsfehlern bei nichtrostenden Stählen durch elektochemische Korrosionsuntersuchungen T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik N2 - In diesem Beitrag soll an drei anschaulichen Beispielen dargestellt werden, wie sich Verarbeitungsfehler bei nichtrostenden Stählen auf das Korrosionsverhalten auswirken und zu unerwarteten Schäden führen können. Mit Hilfe von geeigneten elektrochemischen Verfahren werden Proben von drei unterschiedlichen nichtrostenden Stählen charakterisiert. An einem martensitischen nichtrostenden Stahl wird der Einfluss der Wärmebehandlung gezeigt, da dieser besonders empfindlich auf eine falsche Parameterwahl reagiert. Mit zwei austenitischen Stahlgüten wird verdeutlicht, wie sich Gefügeinhomogenitäten, die im Verarbeitungsprozess und bei der Stahlerzeugung entstehen, auf die Passivierung und das Lochkorrosionsverhalten auswirken. Dabei wird der Oberflächenzustand bei allen Untersuchungen gleich gehalten, um eine Rückführung des Korrosionsverhaltens auf die Gefügeinhomogenitäten durch den Vergleich mit Referenzchargen zu ermöglichen. T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik CY - Magdeburg, Germany DA - 12.09.2014 PY - 2014 SN - 978-3-940961-85-3 SP - 197 EP - 206 AN - OPUS4-31475 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf A1 - Heyn, Andreas A1 - Balzer, Martin A1 - Fenker, M. T1 - Untersuchungen zum Einfluss von Magnesium auf das Korrosionsverhalten von TiMgN - Hartstoffbeschichtungen auf Stahlsubstraten T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik N2 - Hartstoffbeschichtungen werden heutzutage in vielen praktischen Bereichen zur Verbesserung der Verschleißbeständigkeit und aus dekorativen Gründen auf verschiedenste Stahlbauteile aufgebracht. Beim unvermeidlichen Kontakt mit einem umgebenden wässrigen Medium über Schichtporen und-fehler sind die beschichteten metallischen Substratwerkstoffe jedoch der Gefahr lokaler Korrosion ausgesetzt, was mittel-oder langfristig zum Funktionsverlust der Bauteile führen kann. Ein neuartiger Ansatz zur Veränderung der mechanisch-technologischen, optischen sowie elektrochemischen Eigenschaften hartstoffbeschichteter Bauteile ist der Einbau des Elements Magnesium in den physikalisch abgeschiedenen Überzug (z.B. TiN). Untersuchungen von Fenker et al., die die Charakterisierung dieser neuartigen TiMgN-Überzüge zum Ziel hatten, konnten zeigen, dass sich mit zunehmenden Mg-Gehalt die Farbe des Überzugs von dem typischen goldgelb des TiN über violett, blau bis hin zu metallisch grau verändert und weiterhin die Oxidationsbeständigkeit deutlich gesteigert wird. Weiterhin zeigte sich in 24-stündigen neutralen Salzsprühtest, dass sich die Korrosionsbeständigkeit der mit TiMgN beschichteten Stähle mit steigendem Mg-Gehalt deutlich verbessern und die Korrosion des Stahlsubstrats zeitlich verzögert wird. Ausgehend von diesen phänomenologischen Beobachtungen wurden drei verschiedene Arbeitshypothesen über die elektrochemische Wirkungsweise des Magnesiums im TiMgN-Schichtsystem entwickelt, die ursächlich für die verbesserte Korrosionsbeständigkeit seien können. Die drei Arbeitshypothesen sind: · Potentialanpassung: Das Mg verringert das Freie Korrosionspotential der Schicht, welches sich dem des Stahlsubstrates annähert, womit Lochkorrosion verhindert bzw. verzögert wird. · Galvanische Anode/Opferanode: Das elektrochemisch unedlere Mg in dem Schichtsystem geht bei Vorhandensein von freiliegendem Fe bevorzugt in Lösung und schützt so den Stahl als galvanische Anode. · Versiegeln kleiner Schichtdefekte: Ausgefallene Korrosionsprodukte von Mg verschließen vorübergehend Schichtdefekte und verhindern bzw. verzögern das Vordringen des Korrosionsmediums zum Stahl. T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik CY - Magdeburg, Germany DA - 12.09.2014 PY - 2014 SN - 978-3-940961-85-3 SP - 187 EP - 196 AN - OPUS4-31476 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, P. A1 - Babutzka, Martin A1 - Müller, Thoralf A1 - Heyn, Andreas T1 - Einfluss von Mikrostruktur und Oberflächenbearbeitung auf die Korrosionsbeständigkeit martensitisch nichtrostender Stähle T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik N2 - Die Qualität von Schneidwaren aus martensitisch nichtrostenden Stählen (MNS) hängt neben ihrer härtebedingten Schneidleistung wesentlich von ihrer Korrosionsbeständigkeit ab, die dauerhaft das hochwertige optische Erscheinungsbild gewährleisten soll. Zur Prüfung der Korrosionsbeständigkeit hat sich bei Schneidwaren aus MNS die Anwendung des Wechseltauchversuchs etabliert, dessen Ausweitung aufwendig und dessen Ergebnisse oftmals fragwürdig sind. In den letzten Jahren wurden daher neue elektrochemische Methoden entwickelt, um das Korrosionsverhalten von MNS objektiver zu bewerten. Diese neuen Untersuchungsmethoden ermöglichen eine genauere Erfassung der teilweise stark schwankenden Korrosionsbeständigkeit von MNS und bilden damit die Grundlage zur Aufklärung der Ursachen dieser Schwankungen. Im Rahmen des IGF-Vorhabens 16636 BG wurden dazu das elektrochemische Rauschen (ECR), das KorroPad und die elektrochemisch potentiodynamische Reaktivierung (EPR) eingesetzt, um die werkstoffseitigen Einflüsse der Mikrostruktur und den Einfluss der Oberflächenbearbeitung auf die Korrosionsbeständigkeit zu untersuchen. Es wurden dazu an drei weit verbreiteten MNS (1.4116, 1.4034 und 1.4021) je acht verschiedene Oberflächenzustände hergestellt und das Korrosionsverhalten untersucht. Um die dabei aufgetretenen Unterschiede im Lochkorrosionsverhalten zwischen den drei Werkstoffen zu erklären, wurde der EPR-Test eingesetzt, der lokale ChromVerarmung im Gefüge als werkstoffbedingte Ursache von Lochkorrosionsanfälligkeit nachweist. Mit der Kombination der Ergebnisse aus EPR, ECR und KorroPad war es möglich, die unterschiedliche Lochkorrosionsanfälligkeit direkt der unterschiedlich stark ausgeprägten Chromverarmung der drei MNS zuzuordnen. Der Einfluss der Chromverarmung auf die Lochkorrosionsanfälligkeit ist dabei deutlich größer als der Effekt der Oberflächenbearbeitung, der nur bei gering ausgeprägter Chromverarmung ersichtlich ist. Damit wurde gezeigt, dass nur bei Betrachtung aller Einflussgrößen sichere Aussagen zur Korrosionsbeständigkeit und zu den Ursachen der Lochkorrosionsanfälligkeit von MNS möglich sind. T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik CY - Magdeburg, Germany DA - 12.09.2014 PY - 2014 SN - 978-3-940961-85-3 SP - 179 EP - 186 AN - OPUS4-31477 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmigalla, S. A1 - Dittmar, Martin A1 - Heyn, Andreas T1 - Möglichkeiten der elektrochemischen Instrumentierung bei der Untersuchung des Erosionskorrosionsverhaltens metallischer Werkstoffe T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik N2 - Unter praktischen Einsatzbedingungen unterliegen die Konstruktionswerkstoffe in Anlagenkomponenten mit strömenden, feststoffhaltigen Medien, wie sie in vielen Anwendungsgebieten wie z.B. im Bereich der Erdölförderung und -Verarbeitung, der Kraftwerkstechnik sowie dem Bergbau auftreten, einer kombinierten mechanischen und korrosiven Beanspruchung. Da Bauteilschäden in den erwähnten Bereichen aufgrund der dort verarbeiteten Medien vielfach mit einer akuten Gefährdung von Mensch und Umwelt infolge des Austritts der transportierten Medien einhergehen, ist es erforderlich, genaue Erkenntnisse über das Werkstoffverhalten unter kombinierter erosiv-korrosiver Beanspruchung zu erlangen. Bisherige Standardprüfverfahren zur Untersuchung des Erosionskorrosionsverhaltens basieren üblicherweise auf der Bestimmung von Abtragsraten aus gravimetrisch bestimmten Masseverlusten unter definierten Prüfbedingungen. Unter Hochrechnung der ermittelten Abtragsraten wird versucht, Aussagen über das langfristige Werkstoffverhalten zu treffen und die voraussichtliche Betriebsdauer von Anlagenkomponenten abschätzen zu können. Durch die Ermittlung integraler Werte über die gesamte Versuchsdauer bleiben jedoch zeitliche Änderungen in den Bedingungen, wie sie unter praktischen Einsatzbedingungen zu erwarten sind, unberücksichtigt. Zudem können aus der Bestimmung von Abtragsraten unter Standardprüfbedingungen keine Rückschlüsse auf die Ursachen des Materialabtrags sowie auf mögliche Wechselwirkungen zwischen der mechanischen sowie korrosiven Beanspruchungskomponente getroffen werden. Die Entwicklung eines elektrochemisch instrumentierten Versuchsaufbaus kann hier einem Informationszugewinn im Hinblick auf die wirkenden Mechanismen unter kombinierter erosiv-korrosiver Beanspruchung generieren und somit einen entscheidenden Beitrag zur Abschätzung des langfristigen Werkstoffverhaltens unter Einsatzbedingungen und folglich auch zur Verbesserung der Bauteilsicherheit leisten. T2 - 15. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik CY - Magdeburg, Germany DA - 12.09.2014 PY - 2014 SN - 978-3-940961-85-3 SP - 165 EP - 178 AN - OPUS4-31478 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosemann, P. A1 - Babutzka, Martin A1 - Heyn, Andreas A1 - Halle, T. T1 - Influence of heat treatment on corrosion resistance of martensitic stainless steels 1.4034 and 1.4021 T2 - EUROCORR 2014 - European corrosion congress N2 - In the last years, new approaches for the evaluation of the corrosion resistance of stainless steels were developed which allow short term corrosion testing with increased information content. This work analyses the extensive influence of heat treatment on microstructure and the resulting corrosion resistance of the martensitic stainless steels 1.4034 and 1.4021 with advanced methods. Different heat treatments at various austenitization temperatures up to 1100°C and the effect of different cooling rates were evaluated; the last has not yet been studied in literature at all. The resulting corrosion behaviour in relation to the different carbon content in the two used alloys and the applied heat treatment will be presented and discussed. The applied methods of investigation were conventional evaluation of the critical pitting corrosion potential (PP), modified electrochemical potentiodynamic reactivation (mEPR) and the "KorroPad" (KP) technique. The performance of modified EPR and its interpretation were optimized to provide additional information about the general passivation ability and the extent of chromium depletion as result of applied heat treatment. The aim using PP and KP was the correlation between the Parameters of the mEPR with the changes in the pitting corrosion resistance. Furthermore the results will demonstrate the functionality and usability of the short term corrosion test methods mEPR and KP in order to increase their acceptance within the scientific community. The results indicate a surprisingly large influence of both austenitization temperature and cooling rate on the corrosion resistance within all three used test methods, which can explain the different corrosion behaviour of martensitic stainless steels in earlier investigations. T2 - EUROCORR 2014 - European corrosion congress CY - Pisa, Italy DA - 08.09.2014 KW - Martensitic stainless steel KW - KorroPad KW - Pitting corrosion KW - Polarisation PY - 2014 SN - 978-3-89746-159-8 SP - O EP - 7455, 146 AN - OPUS4-31481 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin-Sanchez, Pedro Maria T1 - Contribution of culture-independent methods to the cave aerobiology; the case of Lascaux Cave T2 - International Workshop "The Conservation of Subterranean Cultural Heritage" T2 - International Workshop "The Conservation of Subterranean Cultural Heritage" CY - Seville, Spain DA - 2014-03-24 PY - 2014 AN - OPUS4-31623 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Niebergall, Ute A1 - Adam, Adeline A1 - Stark, Wolfgang T1 - Influence of biodiesel sorption on temperature-dependent impact properties of polyethylene JF - Polymer Testing N2 - In a previous paper we investigated the influence of sorbed biodiesel or diesel on mechanical properties of a typical polyethylene grade for tank applications. Besides the basic sorption and desorption behavior of these two fuels, the study addressed the concentration-dependent mechanical properties as revealed by a non-instrumented Charpy impact test and dynamic mechanical analysis (DMA). In the present paper we extend this investigation focusing on the temperature-dependent impact fracture behavior. Therefore, an instrumented Charpy impact test was employed, allowing a more detailed analysis of the fracture behavior. Furthermore, from the load-time-diagrams obtained from the instrumented impact test, corresponding fracture times can be calculated, allowing a clear correlation of the fuel sorption induced changes in fracture toughness with the enhanced ß-relaxation observed by DMA. As in the previous study, the fracture surfaces of the impact tested specimens were analyzed in order to confirm the brittle or ductile character of the fracture indicated by impact strength and the corresponding load-deflection diagrams. KW - Biodiesel KW - Fuel sorption KW - Impact strength KW - Charpy impact test KW - Dynamic-mechanical analysis KW - Relaxation KW - PE-HD PY - 2014 DO - https://doi.org/10.1016/j.polymertesting.2014.09.001 SN - 0142-9418 VL - 40 SP - 133 EP - 142 PB - Elsevier Science CY - Amsterdam [u.a.] AN - OPUS4-31583 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wiggenhauser, Herbert A1 - Kind, Thomas A1 - Krause, Martin A1 - Schulze, S. A1 - Taffe, A. A1 - Trela, Christiane A1 - Wöstmann, Jens T1 - Praktische Anwendung zerstörungsfreier Prüfverfahren an Brücken T2 - 1. Brückenkolloquium - Beurteilung, Ertüchtigung und Instandsetzung von Brücken N2 - Die drei Beispiele zerstörungsfreier Prüfungen an Spannbetonbrücken zeigen unterschiedliche Problemstellungen und deren Lösung mit unterschiedlichen Ansätzen. Allen drei Beispielen gemeinsam ist die Verwendung kommerzieller Geräte. Diese werden von verschiedenen Anbietern bereitgestellt. Eine weitere Gemeinsamkeit ist, dass die Grundgeräte durch zusätzliche Maßnahmen ergänzt. Erst dann ist der gewünschte Untersuchungserfolg sicher gestellt. Im ersten Beispiel wurde die vom Auftraggeber geforderte Präzision dadurch erreicht, dass systematische Voruntersuchungen stattfanden. Die Übertragung der Lokalisierung direkt auf die Betonoberfläche stellte sicher, dass keinen Informationsverluste an die nachfolgenden Aufgaben auftraten. Das zweite Beispiel zeigt den Nutzen von Automatisierung und Kombination von Verfahren. Damit können dem Auftraggeber die notwendigen Angaben über Einbauteile mit großer Detaitreue und leicht verständlicher Visualisierung aufbereitet werden. Der abschließende Bericht zeigt, wie vorhandene Auswertungen sinnvoll durch noch in der Forschung befindliche Ansätze bereichert werden. Insgesamt ist die zerstörungsfreie Prüfung in der Lage, an Brücken preisrelevante Fragestellungen zu lösen. Voraussetzung hierfür ist eine sorgfältig geplante Vorgehensweise und ein sicheres Verständnis der Grundlage der eingesetzten Geräte und Auswertungsschritte. T2 - 1. Brückenkolloquium - Beurteilung, Ertüchtigung und Instandsetzung von Brücken CY - Ostfildern/Stuttgart, Germany DA - 24.06.2014 PY - 2014 SP - Paper 00_08, 1 EP - 8 AN - OPUS4-31032 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, M. A1 - Kaiser, Martin A1 - Stachowski, G.M. A1 - Resch-Genger, Ute A1 - Gaponik, N. A1 - Eychmüller, A. T1 - Photoluminescence quantum yield and matrix-induced luminescence enhancement of colloidal quantum dots embedded in ionic crystals JF - Chemistry of materials N2 - The incorporation of colloidal quantum dots (QDs) into solid matrices, especially ionic salts, holds several advantages for industrial applications. Here, we demonstrated via absolute measurements of photoluminescence quantum yields (PL-QY) that the photoluminescence of aqueous CdTe QDs can be considerably increased upon incorporation into a salt matrix with a simple crystallization procedure. Enhancement factors of up to 2.8 and a PL-QY of 50 to 80%, both in NaCl crystals and incorporated in silicone matrices, were reached. The fact that the achievable PL enhancement factors depend strongly on PL-QY of the parent QDs can be described by the change of the dielectric surrounding and the passivation of the QD surface, modifying radiative and nonradiative rate constants. Time-resolved PL measurements revealed noncorrelating PL lifetimes and PL-QY, suggesting that weakly emissive QDs of the ensemble are more affected by the enhancement mechanism, thereby influencing PL-QY and PL lifetime in a different manner. PY - 2014 DO - https://doi.org/10.1021/cm5009043 SN - 0897-4756 SN - 1520-5002 VL - 26 IS - 10 SP - 3231 EP - 3237 PB - American Chemical Society CY - Washington, DC AN - OPUS4-31074 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Pohl, Rainer A1 - Montag, Hans-Joachim A1 - Thomas, Hans-Martin A1 - Wüstenberg, Hermann T1 - NDT techniques for railroad wheel and gauge corner inspection T2 - Railway engineering - 2002, 5th International Conference and Exhibition T2 - Railway engineering - 2002, 5th International Conference and Exhibition CY - London, England DA - 2002-07-03 PY - 2002 AN - OPUS4-18892 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Gardei, André A1 - Garcia, O. A1 - Riedl, Martin A1 - Vanhellemond, I. A1 - Suput, J.S. A1 - Santarelli, M.-L. A1 - Rodríguez-Maribona, I. A1 - Müller, Urs ED - Jadwiga W. Lukaszewicz, ED - Piotr Niemcewicz, T1 - Performance and durability of a new antigraffiti system for cultural heritage - the EC project GRAFFITAGE T2 - 11th International Congress on Deterioration and Conservation of Stone, September 15-20, 2008, Torun, Poland (Proceedings) T2 - 11th International Congress on Deterioration and Conservation of Stone CY - Torun, Poland DA - 2008-09-15 KW - Cultural heritage KW - Antigraffiti system KW - Sandstone KW - Limestone KW - Brick KW - Monument KW - Cleaning KW - Historische Baustoffe PY - 2008 SN - 978-83-231-2237-1 VL - II SP - 889 EP - 897 PB - Nicolaus Copernicus University Press CY - Torun, Poland AN - OPUS4-18844 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Thomas, Hans-Martin A1 - Wüstenberg, Hermann T1 - Plattierungsprüfung mittels Ultraschall-Gruppenstrahler und Impulswirbelstrom T2 - DGZfP-Jahrestagung T2 - DGZfP-Jahrestagung CY - Fulda, Germany DA - 1992-04-27 PY - 1992 AN - OPUS4-18845 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Boehm, Rainer A1 - Wüstenberg, Hermann A1 - Brekow, Gerhard A1 - Thomas, Hans-Martin T1 - Redundant Defect Detection and Evaluation with NDT-Techniques T2 - EPRI, Vessel and Internal Inspection Conference T2 - EPRI, Vessel and Internal Inspection Conference CY - San Antonio, TX, USA DA - 1994-07-11 PY - 1994 AN - OPUS4-18854 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Thomas, Hans-Martin A1 - Fischer, E. T1 - Prüfung der Plattierung von Behältern mit gepulstem Wirbelstrom und Ultraschall T2 - 1. Französisch-Deutsches Seminar "Anwendung von ZfP-Mehrfachprüftechnik zur Verbesserung von Auffindbarkeit und Deutung" T2 - 1. Französisch-Deutsches Seminar "Anwendung von ZfP-Mehrfachprüftechnik zur Verbesserung von Auffindbarkeit und Deutung" CY - Metz, France DA - 1995-10-12 PY - 1995 AN - OPUS4-18858 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erhard, Anton A1 - Thomas, Hans-Martin A1 - Wüstenberg, Hermann T1 - Inservice Inspection of Pressure Vessels with Special Emphasis on the Surface and Near Surface Areas T2 - EPRI Reactor Pressure Vessels Inspection Conference T2 - EPRI Reactor Pressure Vessels Inspection Conference CY - Olympic Valley, CA, USA DA - 1996-06-04 PY - 1996 AN - OPUS4-18861 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Mayer, K. A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - New examples for ultrasonic imaging of prestressed concrete elements T2 - 1st International RILEM Conference - on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008), Proceedings T2 - 1st International RILEM Conference, - on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Ultrasonic imaging KW - Grouting condition KW - Elastodynamic Finite Integration Technique (EFIT) PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 1 EP - 10 PB - RILEM Publications AN - OPUS4-19069 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Untersuchung des Entzündungs- und Brandverhaltens von Steinkohlen T2 - Kolloquium "Kohlebrände in China", Bundesanstalt für Geowissenschaften und Rohstoffe (BGR) T2 - Kolloquium "Kohlebrände in China", Bundesanstalt für Geowissenschaften und Rohstoffe (BGR) CY - Hanover, Germany DA - 2009-06-16 PY - 2009 AN - OPUS4-19546 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Ergebnisse eines Ringversuches zur Bestimmung der Selbstentzündungstemperatur brennbarer Schüttgüter T2 - Arbeitskreis "Brennbare Stäube" T2 - Arbeitskreis "Brennbare Stäube" CY - Darmstadt, Germany DA - 2009-06-17 PY - 2009 AN - OPUS4-19548 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - von der Ehe, Kerstin A1 - Jaunich, Matthias A1 - Böhning, Martin A1 - Goering, Harald A1 - Wolff, Dietmar T1 - Detection of structural changes of (U)HMW-PE induced by gamma irradiation T2 - 14th International conference "Polymeric materials" - P.2010 (Proceedings) T2 - 14th International conference "Polymeric materials" CY - Halle (Saale), Germany DA - 2010-09-15 PY - 2010 SN - 978-3-86829-282-4 SP - 1 EP - 6 PB - Druck-Zuck GmbH CY - Halle / Saale AN - OPUS4-21997 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Sabel, Martin A1 - Feldmann, Ines A1 - Raedel, Martina A1 - Torge, Manfred A1 - Unger, Brita A1 - Bücker, Michael T1 - SEM-EDX: A universal tool in restoration T2 - SEM 2010 T2 - SEM 2010 CY - London, England DA - 2010-09-09 PY - 2010 AN - OPUS4-22001 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Vincze, L. A1 - Görner, Wolf T1 - Quantification of energy dispersive SRXRF for the certification of reference materials at BAMline JF - Journal of analytical atomic spectrometry N2 - The certification of reference materials (CRMs) is one of the main tasks of the BAM Federal Institute for Materials Research and Testing. In this context CRMs for analytical chemistry play the dominant role. Traditionally, energy dispersive X-ray fluorescence (EDXRF) has been excluded from the final certification scheme. It has lacked the proof to be reliable enough due to peak overlapping and risks of incorrect background subtraction leading to unacceptable uncertainty and bias of the results. The development described aims at enabling ED-SRXRF to really contribute to certification by the aid of synchrotron radiation. This has been partly shown for macrocontents and has been successfully demonstrated for trace elements and thin layers. The method is based on a combination of measurements of pure elements or stoichiometric compounds as comparator materials and Monte Carlo simulations. Measurements have been performed at the BAMline, the hard X-ray beam line of the BAM at the synchrotron BESSY II in Berlin. KW - SyXRF Quantifizierung KW - Monte Carlo Simulation KW - Referenzmaterialien PY - 2010 DO - https://doi.org/10.1039/b926596a SN - 0267-9477 SN - 1364-5544 VL - 25 IS - 5 SP - 631 EP - 634 PB - Royal Society of Chemistry CY - London AN - OPUS4-22895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Chinta, P.K. A1 - Mayer, K. A1 - Krause, Martin T1 - Ultraschallmodellierung und SAFT-Rekonstruktion von Fehlstellen in Holzbauteilen T2 - DGZfP-Jahrestagung 2010 T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Ultraschallecho KW - Holz KW - SAFT PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Poster 59) SP - 1 EP - 8 CY - Berlin AN - OPUS4-22899 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mans, C. A1 - Simons, C. A1 - Hanning, S. A1 - Janßen, A. A1 - Alber, D. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Bühler, A. A1 - Kreyenschmidt, M. T1 - New polymeric candidate reference materials for XRF and LA-ICP-MS - development and preliminary characterization JF - X-ray spectrometry N2 - A set of ten calibration materials based on acrylonitrile-butadiene-styrene terpolymer (ABS) containing the elements Br, Pb, Cd, Cr, and Hg was produced in order to control polymer samples in regard to the restriction on the use of certain hazardous substances (RoHS) directive. The materials were produced with respect to the special demands of X-ray fluorescence analysis (XRF) and inductively coupled plasma mass spectrometry in combination with laser ablation (LA-ICP-MS). The mass fractions of all elements were 0-1500 mg/kg and the materials were produced as granulates and solid discs with a diameter of 40 mm and thicknesses of 1, 2, and 6 mm. It could be shown that the signals measured by XRF strongly depend on the thickness of polymeric samples. Macroscopic homogeneity was assessed with XRF measuring a total of 180 samples. The microscopic homogeneities were determined for a material with average elemental mass fractions with the aid of synchrotron radiation (SR) µ-XRF and LA-ICP-MS. Sufficient macroscopic and microscopic homogeneities for all elements could be achieved. It was observed that organic additives show a better homogeneity than oxides. XRF and LA-ICP-MS were successfully calibrated with the new materials. Limits of detection were in the range of 0.4-22 mg/kg for XRF and 2.3-26.8 mg/kg for LA-ICP-MS. The materials are considered as candidate reference materials (RM) by the Federal Institute of Materials Research and Testing (BAM, Germany). KW - XRF KW - LA.ICP-MS Plastics KW - RoHS KW - CRM PY - 2009 DO - https://doi.org/10.1002/xrs.1120 SN - 0049-8246 VL - 38 IS - 1 SP - 52 EP - 57 PB - Wiley CY - Chichester AN - OPUS4-18681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Ulrich A1 - Schmidt, Martin A1 - Ferrero, Fabio T1 - Investigation of the development of conflagration of solid material via analysis of coupled heat, mass and momentum transport JF - Chemical engineering & technology KW - Bulk materials KW - Fire prevention KW - Numerical modeling KW - Self-ignition KW - Smouldering fires PY - 2009 DO - https://doi.org/10.1002/ceat.200800557 SN - 0930-7516 SN - 1521-4125 VL - 32 IS - 2 SP - 292 EP - 305 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-18916 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Suhendra, Suhendra A1 - Schmidt, Martin A1 - Krause, Ulrich ED - Shengcai Li, ED - Wang, Yajun ED - An, Ying ED - Sun, Xiuyun ED - Li, Xin T1 - Extinguishing underground coal seam fires: Experimental and numerical investigations of coal fire propagation T2 - Progress in safety science and technology - Part B T2 - International Symposium on Safety Science and Technology CY - Beijing, China DA - 2008-09-24 KW - Numerische Simulation KW - Kohlefeuer KW - Klimaschutz KW - Brandlöschung PY - 2008 SN - 978-7-03-022901-4 VL - VII SP - 2523 EP - 2532 PB - Science Press USA Inc. AN - OPUS4-18917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Riedl, Martin A1 - Müller, Urs A1 - Gardei, André T1 - Graffitischutz auf Betonoberflächen T2 - Fachtagung Instandsetzung von Betonbauteilen T2 - Fachtagung Instandsetzung von Betonbauteilen CY - Rostock, Germany DA - 2008-10-02 PY - 2008 AN - OPUS4-18911 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Brände von Massenschüttgütern, Recycling- und Deponiestoffen: Technische Prozesse mit Auftreten von Zündquellen, Ausbreitung von Schwelbränden in Haufwerken, Einflüsse auf das Brandverhalten T2 - Seminar "Schüttgüter" T2 - Seminar "Schüttgüter" CY - Berlin, Germany DA - 2009-03-03 PY - 2009 AN - OPUS4-19328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zencker, Uwe A1 - Weber, Mike A1 - Qiao, Linan A1 - Menzel, Martin A1 - Droste, Bernhard T1 - Beurteilungsmethoden für Transport- und Lagerbehälter mit erhöhten metallischen Reststoffanteilen - Behälterbruchsicherheitsuntersuchungen und Entwicklung eines KONRAD-Referenzprüfstandfundamentes T2 - 9. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle" (KONTEC 2009) - Proceedings T2 - 9. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle" (KONTEC 2009) CY - Dresden DA - 2009-04-15 KW - Duktiles Gusseisen KW - Behälterdesign KW - Sicherheitstechnische Bewertung KW - Bruchmechanik KW - Dynamische Belastungsbedingungen KW - KONRAD KW - Referenzprüfstandfundament PY - 2009 SP - 646 EP - 652 PB - KONTEC CY - Hamburg AN - OPUS4-19396 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Matthies, Klaus A1 - Erhard, Anton A1 - Ernst, h. A1 - Hübschen, G. A1 - Just, Tilman A1 - Völz, Uwe A1 - Wessels, J. A1 - Boehm, Rainer A1 - Gebhardt, W. A1 - Mrasek, Heinz A1 - Neumann, Eberhard A1 - Redmer, Bernhard A1 - Schmitz, V. A1 - Thomas, Hans-Martin A1 - Walte, F. T1 - Ultraschallprüfung von austenitischen Werkstoffen T2 - Ultraschallprüfung von austenitischen Werkstoffen PY - 2009 SN - 978-3-87155-988-4 IS - 1. Aufl. SP - 1 EP - 464 PB - DVS-Verl. CY - Berlin AN - OPUS4-19897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Holtappels, Kai A1 - Kluge, Martin A1 - Gebauer, Marek A1 - Grüneberg, Miriam A1 - Eliezer, D. T1 - Hydrogen storage in glass capillary arrays for portable and mobile systems T2 - 3rd International conference on hydrogen safety (Proceedings) T2 - 3rd International conference on hydrogen safety CY - Ajaccio, Corsica, France DA - 2009-09-16 KW - Glaskapillare KW - Hochdruckwasserstoff KW - Gasspeicherung KW - Mobile Speichersysteme PY - 2009 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. IS - ID 204 SP - 1 EP - 8(?) AN - OPUS4-19905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Reinsch, Stefan A1 - Schadrack, Reinhard A1 - Benemann, Sigrid T1 - Burnout behavior of ceramic coated open cell polyurethane (PU) sponges JF - Journal of the European Ceramic Society N2 - Open cell rigid foams made from polyurethane (PU) are frequently used in ceramic processing for preparation of porous ceramics by the so-called replica technique. This work presents data regarding the PU burnout, shrinkage characteristics as well as the morphology of the ceramic coated PU sponges during heating up. Shrinkage of the ceramic coated PU sponges closely follows the mass loss due to PU decomposition. Two temperatures (i) 267 °C and (ii) 380 °C were identified at which PU decomposition reaches local maxima. Shrinkage measurements on ceramic coated PU sponges reveal that both PU decomposition stages lead to similar extends of shrinkage in the ceramic coated PU sponge. Differential thermal analysis (DTA) showed that the two decomposition related temperatures (267 and 380 °C) differ concerning the energy release. While the low-temperature signal is endothermic, an exothermic signal was detected at 380 °C. The morphology of the ceramic coated PU sponges was investigated with scanning electron microscopy (SEM) which gave insight into the formation of hollow ceramic struts-a well known feature of ceramics being prepared by the replica technique. KW - Polyurethane (PU) KW - Porous ceramics KW - Mass spectrometry KW - Thermal analysis PY - 2009 DO - https://doi.org/10.1016/j.jeurceramsoc.2009.07.025 SN - 0955-2219 SN - 1873-619X VL - 29 IS - 16 SP - 3333 EP - 3339 PB - Elsevier CY - Oxford AN - OPUS4-20092 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Strub, E. A1 - Born, H. T1 - Neues vom Berliner Goldhut: Analyse mit Sy-RFA T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen, SNI 2010 T2 - Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen, SNI 2010 CY - Berlin, Germany DA - 2010-02-24 PY - 2010 AN - OPUS4-20097 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Heuchel, M. A1 - Hölck, Ole T1 - Atomistic simulation of gas sorption isotherms in a polymer of intrinsic microporosity (PIM-1) T2 - EUROMEMBRANE 2009 Conference T2 - EUROMEMBRANE 2009 Conference CY - Montpellier, France DA - 2009-09-06 PY - 2009 AN - OPUS4-20103 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Brekow, Gerhard A1 - Heckel, Thomas A1 - Thomas, Hans-Martin T1 - Zerstörungsfreie Prüfung von Eisenbahnschienen JF - Lernen & lehren : Elektrotechnik - Informatik, Metalltechnik PY - 2009 SN - 0176-0157 SN - 0940-7340 VL - 24 IS - 95 SP - 112 EP - 117 PB - Heckner CY - Wolfenbüttel AN - OPUS4-20105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Heckel, Thomas A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc A1 - Rühe, S. ED - Mazal, Pavel T1 - High speed non-destructive rail testing with advanced ultrasound and eddy-current testing techniques T2 - 5th International workshop of NDT experts - NDT in progress 2009 (Proceedings) T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Non-destructive testing (NDT) KW - Rail inspection KW - Ultrasound KW - Eddy current KW - Signal processing PY - 2009 SN - 978-80-214-3968-9 SP - 101 EP - 109 AN - OPUS4-20340 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Cabral, A. R. A1 - Lehmann, B. A1 - Munnik, F. T1 - Spatially-resolved detection of iodine in natural plantinum-palladium nuggets: a comparison of PIXE and XRF T2 - European Conference on X-ray Spectrometry T2 - European Conference on X-ray Spectrometry CY - Figueira da Foz, Portugal DA - 2010-06-20 PY - 2010 AN - OPUS4-21073 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - García, O. A1 - Rz-Maribona, I. A1 - Gardei, André A1 - Riedl, Martin A1 - Vanhellemont, Y. A1 - Santarelli, M.L. A1 - Strupi Suput, J. T1 - Comparative study of the variation or the hydric properties and aspect of natural stone and brick after the application of 4 types of anti-graffiti JF - Materiales de construcción N2 - In this article a comparative study of the behaviour of different commercial anti-graffiti on natural stone and brick is presented. 8 different European substrates were selected and 4 commercial anti-graffiti of different chemical nature were applied on these substrates. The variations of their hydric properties and aspect (colour and gloss) with regard to the untreated substrates were later studied in the laboratory. The results obtained permitted to assess the suitability of 4 of the main types of chemical formulations employed to be used as anti-graffiti. This study concludes that the sacrificial anti-graffiti with polymeric paraffins in its composition presents the lowest reductions of the hydric properties of the studied substrates, being also the variations in colour the least perceptible. KW - Graffiti KW - Sandstone KW - Limestone KW - Natural stone KW - Brick KW - Anti-graffiti KW - Porous substrates KW - Surface treatments KW - Anti-graffiti coatings KW - Hydric properties KW - Colour KW - Gloss PY - 2010 DO - https://doi.org/10.3989/mc.2010.45507 SN - 0465-2746 N1 - Sprachen: Spanisch/Englisch - Languages: Spanish/English VL - 60 IS - 297 SP - 1 EP - 14 CY - Madrid AN - OPUS4-21087 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Suhendra, Suhendra T1 - Heatpipes: Suitable to Extinguish Coal Fires? T2 - Finale Meeting Sino-German Coal Fire Research Initiative, Phase B T2 - Finale Meeting Sino-German Coal Fire Research Initiative, Phase B CY - Beijing, China DA - 2010-03-24 PY - 2010 AN - OPUS4-21122 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Schmidt, Martin T1 - Ignition and Burning Behaviour of Coals, Gas Emissions T2 - Final Meeting Sino-German Coal Fire Research Initiative, Phase B T2 - Final Meeting Sino-German Coal Fire Research Initiative, Phase B CY - Beijing, China DA - 2010-03-24 PY - 2010 AN - OPUS4-21124 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc A1 - Böhme, Thilo T1 - STK-Bandbreiten von Stäuben in der GSBL Datenbank: Zielsetzung und Beispiele T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" T2 - ProcessNet Arbeitsausschuss "Sicherheitstechnische Kenngrößen" CY - Frankfurt am Main, Germany DA - 2010-04-13 PY - 2010 AN - OPUS4-21125 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Pohl, Rainer T1 - Die Kunst des Prüfens: Wirbelstromprüfung am Schrein der Heiligen Drei Könige T2 - DGZfP-Jahrestagung 2010 Zerstörungsfreie Materialprüfung ZfP in Forschung, Entwicklung und Anwendung T2 - DGZfP-Jahrestagung 2010 Zerstörungsfreie Materialprüfung ZfP in Forschung, Entwicklung und Anwendung CY - Erfurt, Germany DA - 2010-05-10 PY - 2010 AN - OPUS4-21480 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kus, J. A1 - Kaufhold, S. A1 - Klosa, D. A1 - Jianwei, M. A1 - Schmidt, Martin A1 - Suhendra, Suhendra T1 - Coal fire geothermometer: Controlling the extent and temperature field of underground coal fire zones T2 - Latest developments in coal fire research - Bridging the science, economics, and politics of a global disaster / ICCFR2 T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Coal fires KW - Coal petrography KW - Coal mineralogy PY - 2010 SN - 978-3-86012-397-3 IS - Part 2 - Geosciences SP - 75 EP - 85 AN - OPUS4-21459 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fischer, C. A1 - Wu, J. A1 - Meyer, U. A1 - Kong, B. A1 - Schmidt, Martin A1 - Wuttke, M. A1 - Drebenstedt, C. A1 - Barth, Uli A1 - Rüter, H. T1 - Eight years of successful bilateral cooperation: Milestones of sino-german research T2 - Latest developments in coal fire research - Bridging the science, economics, and politics of a global disaster / ICCFR2 T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Underground coal fires KW - Sino-german cooperation PY - 2010 SN - 978-3-86012-397-3 IS - Introduction SP - 3 EP - 18 AN - OPUS4-21460 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krietsch, Arne A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Helmis, Mario T1 - Laboratory investigations on the ignition and burning process of coal: Fire characteristics and gas emissions T2 - Latest developments in coal fire research - Bridging the science, economics, and politics of a global disaster / ICCFR2 T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Spontaneous combustions KW - Coal fires KW - Gas emissions KW - Fire propagation PY - 2010 SN - 978-3-86012-397-3 SP - 147 EP - 152 AN - OPUS4-21461 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Rüter, H. T1 - Heat pipes - Suitable for extinguishing underground coal fires? T2 - Latest developments in coal fire research - Bridging the science, economics, and politics of a global disaster / ICCFR2 T2 - 2nd International conference on coal fire research (ICCFR2) CY - Berlin, Germany DA - 2010-05-19 KW - Coal fires KW - Fire fighting KW - Heat pipes PY - 2010 SN - 978-3-86012-397-3 SP - 433 EP - 437 AN - OPUS4-21462 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Krause, Heike T1 - Vorhersage von Selbstentzündungsvorgängen in Brennstofflagern mit Hilfe numerischer Simulationsrechnungen T2 - 12. BAM/PTB-Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik T2 - 12. BAM/PTB-Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Germany DA - 2010-06-15 PY - 2010 AN - OPUS4-21487 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Schmidtchen, Ulrich A1 - Pahl, Robert A1 - Noack, Jennifer A1 - Kolvitz, Kristian A1 - Runge, Thomas A1 - Holtappels, Kai A1 - Hensel, Christina A1 - Bönig, Jürgen A1 - Schulze, Uwe A1 - Askar, Enis A1 - Frank, M. A1 - Thornton, D. T1 - Experimentelle und numerische Untersuchungen des Verhaltens von Acetylenflaschen im Feuer T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik T2 - 12. Kolloquium zu Fragen der chemischen und physikalischen Sicherheitstechnik CY - Berlin, Deutschland DA - 2010-06-15 KW - Acetylendruckgasbehälter KW - Unterfeuerung KW - Aufheizverhalten KW - CFD-Modellierung PY - 2010 SN - 978-3-9813550-1-7 SN - 0938-5533 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 70 EP - 72 PB - BAM Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-21488 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Krause, Heike A1 - Schröder, Volkmar ED - Suter, G. ED - de Rademaeker, E. T1 - Study of the explosive decomposition of tetrafluoroethylene in a partially heated pipe T2 - 13th International symposium on loss prevention and safety promotion in the process industries (Proceedings) T2 - 13th International symposium on loss prevention and safety promotion in the process industries CY - Brugge, Belgium DA - 2010-06-06 KW - Unstable gases KW - TFE KW - Decomposition KW - Pipes PY - 2010 SN - 978-90-76019-291 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 02 SP - 415 EP - 418 CY - Brugge, Belgium AN - OPUS4-21489 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pelkner, Matthias A1 - Reimund, Verena A1 - Blome, Mark A1 - Thomas, Hans-Martin A1 - Kreutzbruck, Marc T1 - 3D-GMR-Messung an Referenzbauteilen und Rekonstruktion der Rissparameter T2 - DGZfP-Jahrestagung 2010 N2 - Zunehmend werden hochpräzise Magnetfeldsensoren in der Materialprüfung verwendet. Aus dem Zoo der Magnetfeldsensoren eignen sich GMR-Sensoren (Giant Magneto Resistance) aufgrund ihrer hohen Feld- Empfindlichkeit, ihrem hohen Signal-Rausch-Verhältnis sowie ihrer kleinen Sensorflächen (verbunden mit einer hohen Ortsauflösung) hierfür im Besonderen. Mit GMR-Sensoren wurden Risse untersucht und konnten mit einer Tiefe ≤ 50 µm noch mit einem guten Signal-Rausch-Verhältnis aufgelöst werden. Die an Prüfkörpern mit künstlich eingebrachten Defekten gemessenen Streufeldsignale wurden anhand von analytischen Lösungen verifiziert. Anhand der analytischen Lösungen wurden auch Defektparameter zu den aufgezeichneten Signalen rekonstruiert. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (Mo.3.A.4) SP - 1 EP - 9 CY - Berlin AN - OPUS4-21881 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Pohl, Rainer T1 - Die Kunst des Prüfens: Wirbelstromprüfung am Schrein der Heiligen Drei Könige im Kölner Dom T2 - DGZfP-Jahrestagung 2010 N2 - Der Schrein der Heiligen Drei Könige im Kölner Dom ist einer der bedeutendsten Goldschmiedearbeiten des Mittelalters in Europa. Der Schrein übertrifft heute mit seiner Größe und künstlerischen Qualität alle noch erhaltenen Reliquiare des Mittelalters. Diese kunstvoll verkleidete Truhe (2,10 Meter lang, 1,10 Meter breit und 1,51 Meter hoch) wiegt 515 Kilogramm, denn sie ist reich verziert mit Goldblechen, vergoldeten Figuren und Blechen aus Silber und Kupfer, über 300 Gemmen, sowie 1741 Edelsteinen und Perlen. Die Bundesanstalt für Materialforschung und -prüfung in Berlin unterstützte das Rheinische Landesmuseum Bonn und die Kölner Dombauverwaltung bei den Untersuchungen des Schreins der Heiligen Drei Könige mit dem Wirbelstromprüfverfahren. Mit Hilfe von Leitfähigkeitsmessungen auf Basis des Wirbelstromverfahrens konnte die gesamte Metalloberfläche des Dreikönigenschreins untersucht werden. Durch Vergleich der Messwerte mit den zuvor untersuchten Fragmenten konnten die unterschiedlichen Legierungen der Beschläge und Figuren des Schreins identifiziert werden. Die besondere Schwierigkeit hierbei bestand darin, dass es sich überwiegend um sehr dünne Bleche verschiedener Legierungen handelt, die eine stark ausgebildete Reliefstruktur haben und die vergoldet wurden. Mit den Ergebnissen ist der Nachweis gelungen, dass es schon im frühen 19. Jahrhundert eine äußerst überzeugende kopistische Technik bei der Herstellung von Prägewerkzeugen gab. Die Ergebnisse der Wirbelstromprüfung waren für die rheinländischen Kunsthistoriker argumentativ von großer Bedeutung. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 2010-05-10 KW - Wirbelstromprüfung KW - Leitfähigkeitsprüfung PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P23) SP - 1 EP - 6 CY - Berlin AN - OPUS4-21882 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Dey, Anika A1 - Heyder, R. T1 - Eddy current test method for early detection of rolling contact fatigue (RCF) in rails JF - Insight N2 - The findings indicate that rolling contact fatigue with consecutive head checks develops preferentially in rail sections that have experienced operational work-hardening. Such hardening can be identified by instruments measuring the increased hardness values with respect to the base material. Eddy current testing was initially introduced with the aim to detect head checks and determine their damage depth. Because the material texture influences eddy current flow in the test objects very strongly, variations in hardness can easily be visualised using this method. Thus, in principle, it is possible to predict places where head checks will emerge later. This knowledge may be very helpful in improving our understanding of head check emergence under real conditions. This knowledge may also help in developing new and effective precautionary maintenance strategies. KW - Rails KW - Rolling contact fatigue KW - Head checks KW - Non-destructive testing KW - Eddy current technique PY - 2010 DO - https://doi.org/10.1784/insi.2010.52.7.361 SN - 0007-1137 VL - 52 IS - 7 SP - 361 EP - 365 PB - British Institute of Non-Destructive Testing CY - Northampton AN - OPUS4-21934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Hensel, Christina A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - The behavior of acetylene cylinders involved in fire: An experimental and numerical analysis T2 - 19th International congress of chemical and process engineering (CHISA 2010) / 7th European congress of chemical engineering (ECCE-7) N2 - Fire exposure tests of acetylene cylinders were performed. The purpose of the experiments was to gather information on the behavior in fire of such vessels, depending on the initial charge of acetylene. In fact "empty" acetylene cylinders still contain the solvent in which acetylene is dissolved plus the amount of acetylene to saturation at atmospheric pressure and ambient temperature and may still constitute a threat to safety. In the fire exposure tests performed the hazardousness of these vessels was demonstrated, since it was observed that not only fully charged acetylene cylinders but also cylinders with saturated solvent can explode, provided the heat transfer to the vessel is sufficient. The times to explosion were shorter for fully charged cylinders, due to the higher initial pressure and to the faster pressure increase. The effects of the explosions are comparable for both fully charged cylinders and for cylinders with saturated solvent, except for the smaller fireball which is produced in the second case, due to the smaller amount of fuel available. In both cases the cylinder walls or at least fragments can fly further than 100 m away from the burst location. Results of the experiments are presented in the paper. During the tests, temperature measurements at the cylinder walls and in the cylinder interior were performed. Furthermore, the pressure in the cylinder was recorded. The collected data will serve for the validation of a numerical model for the simulation of the heating of acetylene cylinders involved in fire and of the afterward cooling with water, which has been developed. The constitutive model equations and the results of some simulations are presented in the paper. T2 - 19th International congress of chemical and process engineering (CHISA 2010) / 7th European congress of chemical engineering (ECCE-7) CY - Prague, Czech Republic DA - 2010-08-28 KW - Safety KW - Acetylene KW - Heat transfer KW - Fire KW - Simulation PY - 2010 SN - 978-80-02-02210-7 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. IS - F3.1 / 0973 SP - 1 EP - 13 CY - Prague, Czech Republic AN - OPUS4-21923 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Fire and Explosion Risks of Combustible Solids T2 - Seminar at BRE centre for Fire Safety Engineering T2 - Seminar at BRE centre for Fire Safety Engineering CY - Edinburgh, Scotland DA - 2010-08-13 PY - 2010 AN - OPUS4-21904 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin A1 - Ferrero, Fabio A1 - Malow, Marcus A1 - Krause, Ulrich T1 - Vermeidung der Brandentstehung bei der Lagerung von Biomasse T2 - VDI-Berichte 2096 - Sichere Handhabung brennbarer Stäube T2 - VDI-Fachtagung - Sichere Handhabung brennbarer Stäube CY - Nürnberg, Deutschland DA - 2010-11-16 KW - Selbstentzündung KW - Biomasse KW - Numerische Simulation KW - Brandvermeidung PY - 2010 SN - 978-3-18-092096-2 SN - 0083-5560 N1 - Serientitel: VDI-Berichte – Series title: VDI-Berichte IS - 2096 SP - 87 EP - 98 AN - OPUS4-22501 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schoßig, Jörg A1 - Schmidt, Martin A1 - Krause, Ulrich A1 - Steinbach, J. T1 - Beurteilung des Selbstentzündungsverhaltens brennbarer Stäube mit Hilfe adiabatischer Warmlagerung T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 10. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Deutschland DA - 2010-11-04 KW - Anlagensicherheit KW - Umweltschutz KW - Sicherheitstechnik KW - Explosionsschutz PY - 2010 SN - 978-3-89746-119-2 SP - 1 EP - 7(?) CY - Frankfurt/M. AN - OPUS4-22621 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dreßler, Martin A1 - Nofz, Marianne A1 - Klobes, Peter A1 - Dörfel, Ilona A1 - Reinsch, Stefan T1 - Differences between films and monoliths of sol-gel derived aluminas JF - Thin solid films N2 - This work compares thin layers (films) and monoliths prepared from alumina sols with respect to their microstructure, thermal evolution, porosity and specific surface area. After heat treatment at similar temperatures, films and monoliths showed the same qualitative changes in porosity and specific surface area. However, some marked quantitative differences were detected. Film fragments had a lower open porosity, a lower specific surface area and a narrower pore size distribution. Furthermore, the thermal evolution showed a markedly different burnout of organic components between films and monoliths. The observed differences between films and monolith can be explained by the ageing history of the sols during sample preparation. KW - Sol-gel processing KW - Alumina KW - Phase transitions KW - Porosity PY - 2010 DO - https://doi.org/10.1016/j.tsf.2010.07.057 SN - 0040-6090 VL - 519 IS - 1 SP - 42 EP - 51 PB - Elsevier CY - Amsterdam AN - OPUS4-22606 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hasenstab, Andreas A1 - Krause, Martin A1 - Hillemeier, B. A1 - Rieck, C. T1 - Ultraschallecho-Messungen an Holz JF - Holz als Roh- und Werkstoff N2 - In der Praxis kann Fäulnis in Holzkonstruktionen ein großes Problem darstellen. Ein Fäulnisbefall kann zu einer Schädigung in der Gesamtkonstruktion führen. Zusammen mit der TU Berlin wurden an der Bundesanstalt für Materialforschung und -prüfung (BAM) Versuche mit Ultraschallecho zur Detektion von Bauteilrückwänden und verdeckten Hohlstellen durchgeführt. Hierbei werden Sender und Empfänger auf einer Bauteilseite angekoppelt, was eine große Anwendungsvielfalt ermöglicht. Im Rahmen der Versuche an der BAM wurden zylindrische Longitudinalwellenprüfköpfe in Zweikopftechnik mit 100 kHz angeregt und an den Probekörpern mit verschiedenen Koppelmitteln angekoppelt. Die Messergebnisse wurden graphisch als B-Bilder dargestellt und ausgewertet. Dabei zeigte sich, dass die Rückwand der fehlerfreien Probekörper klar geortet wird und eingebrachte Hohlstellen besonders gut detektiert werden können. KW - Zerstörungsfreie Prüfung KW - Ultraschallecho KW - Holz PY - 2006 DO - https://doi.org/10.1007/s00107-006-0124-x SN - 0018-3768 VL - 64 SP - 475 EP - 481 PB - Springer CY - Berlin AN - OPUS4-23056 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Scharf, O. A1 - Reinholz, Uwe A1 - Bjeoumikova, S. A1 - Wedell, R. A1 - Soltau, H. A1 - Gubzhokov, Renat A1 - Riesemeier, Heinrich A1 - Langhoff, N. A1 - Ihle, S. T1 - First images of a colour X-ray camera, a detector with high resolution in energy and space T2 - Technart 2011 T2 - Technart 2011 CY - Berlin, Germany DA - 2011-04-26 PY - 2011 AN - OPUS4-23082 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gabitov, R.I. A1 - Schmitt, A.K. A1 - Rosner, Martin A1 - McKeegan, K.D. A1 - Gaetani, G.A. A1 - Cohen, A.L. A1 - Watson, E.B. A1 - Harrison, T.M. T1 - In situ delta7Li, Li/Ca, and Mg/Ca analyses of synthetic aragonites JF - Geochemistry, geophysics, geosystems N2 - In situ secondary ion mass spectrometry (SIMS) analyses of δ7Li, Li/Ca, and Mg/Ca were performed on five synthetic aragonite samples precipitated from seawater at 25°C at different rates. The compositions of δ7Li in bulk aragonites and experimental fluids were measured by multicollector inductively coupled plasma–mass spectrometry (MC-ICP-MS). Both techniques yielded similar δ7Li in aragonite when SIMS analyses were corrected to calcium carbonate reference materials. Fractionation factors α7Li/6Li range from 0.9895 to 0.9923, which translates to a fractionation between aragonite and fluid from -10.5‰ to -7.7‰. The within-sample δ7Li range determined by SIMS is up to 27‰, exceeding the difference between bulk δ7Li analyses of different aragonite precipitates. Moreover, the centers of aragonite hemispherical bundles (spherulites) are enriched in Li/Ca and Mg/Ca relative to spherulite fibers by up to factors of 2 and 8, respectively. The Li/Ca and Mg/Ca ratios of spherulite fibers increase with aragonite precipitation rate. These results suggest that precipitation rate is a potentially important consideration when using Li isotopes and elemental ratios in natural carbonates as a proxy for seawater composition and temperature. KW - Lithium KW - Isotope KW - Aragonite KW - Rate KW - SIMS KW - Magnesium PY - 2011 DO - https://doi.org/10.1029/2010GC003322 SN - 1525-2027 VL - 12 IS - 3 (Technical Brief) SP - 1 EP - 16 CY - Washington, DC, USA AN - OPUS4-23312 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Röntgenfluoreszenzanalyse mit Synchrotronstrahlung an derr Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin T2 - Seminar: Strahlenphysikalische Anwendungen in Technik und Medizin T2 - Seminar: Strahlenphysikalische Anwendungen in Technik und Medizin CY - Vienna, Austria DA - 2010-01-13 PY - 2010 AN - OPUS4-23261 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - XRF using synchrotron radiation T2 - Vienna summer school 2010 "Radiation physics in cultural heritage studies" T2 - Vienna summer school 2010 "Radiation physics in cultural heritage studies" CY - Vienna, Austria DA - 2010-09-21 PY - 2010 AN - OPUS4-23263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Synchrotronstrahlung für die Untersuchung von Kunstobjekten T2 - DGZfP Arbeitskreis Dresden T2 - DGZfP Arbeitskreis Dresden CY - Dresden, Germany DA - 2010-12-09 PY - 2010 AN - OPUS4-23264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Röntgenfluoreszenzanalyse mit Synchrotronstrahlung an der Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin T2 - Seminar: "Strahlenphysikalische Anwendungen in Technik und Medizin" T2 - Seminar: "Strahlenphysikalische Anwendungen in Technik und Medizin" CY - Vienna, Austria DA - 2011-01-19 PY - 2011 AN - OPUS4-23265 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Schoßig, Jörg T1 - Validierung formalkinetischer Größen aus der adiabaten Warmlagerung T2 - Technische Jahreskonferenz der Chemieindustrie T2 - Technische Jahreskonferenz der Chemieindustrie CY - Marburg, Germany DA - 2011-05-31 PY - 2011 AN - OPUS4-23789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank T1 - Rechnerische Simulation des mechanischen Verhaltens von holzgefüllten Stoßdämpfern von Transportbehältern für radioaktive Stoffe T2 - Jahrestagung Kerntechnik, Berliner Congress Center (BBC) T2 - Jahrestagung Kerntechnik, Berliner Congress Center (BBC) CY - Berlin, Germany DA - 2011-05-17 PY - 2011 AN - OPUS4-23793 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kluge, Martin A1 - Ferrero, Fabio A1 - Schröder, Volkmar A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Modellazione del processo di autoaccensione del TFE JF - ICP - Rivista dell'industria chimica KW - Convezione naturale (free convention) KW - Trasporto reattivo (reactive flow) KW - Reazione in fase gas (gas reaction) KW - Autoignizione (self-ignition) PY - 2011 SN - 0390-2358 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 6 SP - 84 EP - 90 PB - ERIS CY - Milan AN - OPUS4-24094 LA - ita AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Holtappels, Kai A1 - Ried, Peter A1 - Krause, Heike A1 - Eliezer, D. T1 - Pressure resistance of glass capillary structures for gas storage purposes T2 - First International Conference on Materials for Energy T2 - First International Conference on Materials for Energy CY - Karlsruhe, Germany DA - 2010-07-04 PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, Martin - Birth name of Kluge, Martin: Beckmann-Kluge, Martin AN - OPUS4-24056 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone A1 - Krause, Ulrich T1 - Calculation of the Heat Release Rate from Oxygen Consumption in the Cone Calorimeter using the Controlled-atmosphere box T2 - 10th International Symposium on Fire Safety Science, University of Maryland T2 - 10th International Symposium on Fire Safety Science, University of Maryland CY - College Park, MD, USA DA - 2011-06-19 PY - 2011 AN - OPUS4-24086 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - X-ray Fluorescence analysis using synchrotron radiation excitation T2 - 75. Jahrestagung der DPG und DPG Frühjahrstagung T2 - 75. Jahrestagung der DPG und DPG Frühjahrstagung CY - Dresden, Germany DA - 2011-03-13 PY - 2011 AN - OPUS4-24023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Scharf, Oliver A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Buzanich, Günter A1 - Bjeoumikhov, A. A1 - Gubzhokov, Renat A1 - Wedell, R. A1 - Soltau, H. A1 - Ihle, S. A1 - Ordavo, I. A1 - Langhoff, N. T1 - The colour X-ray camera: Basics, Applications and Perspectives T2 - 21st International Congress on X-ray Optics and Microanalysis (ICXOM21) T2 - 21st International Congress on X-ray Optics and Microanalysis (ICXOM21) CY - Campinas, Brazil DA - 2011-09-05 PY - 2011 AN - OPUS4-24024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Scharf, O. A1 - Bjeoumikova, S. A1 - Wedell, R. A1 - Soltau, H. A1 - Ordavo, I. A1 - Langhoff, N. A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Gubzhokov, Renat A1 - Kuehbacher, M. A1 - Giere, P. A1 - Riesemeier, Heinrich T1 - Non-invasive spatial scanning for iron and calcium in the enamel of a red toothed shrew, Sorex araneus (Soricidae, Lipotyphla) T2 - 85th Annual Conference of the German Society of Mammalogy T2 - 85th Annual Conference of the German Society of Mammalogy CY - Luxembourg City, Luxembourg DA - 2011-09-13 PY - 2011 AN - OPUS4-24025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Materialforschung an der BAMline T2 - DGM-Fachausschuss Werkstoffcharakterisierung mit Strahllinien T2 - DGM-Fachausschuss Werkstoffcharakterisierung mit Strahllinien CY - Berlin, Germany DA - 2011-05-27 PY - 2011 AN - OPUS4-24026 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Ferrero, Fabio A1 - Schröder, Volkmar A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Improvements in the modeling of the self ignition of tetrafluoroethylene T2 - COMSOL Conference 2010 (Proceedings) N2 - In order to prevent incidents in the industrial production of Teflon® from Tetrafluoroethylene (TFE), the safety related aspects of the self-heating process of TFE must be taken into account. Simulations of this self heating process were performed with COMSOL Reaction Engineering Lab® and COMSOL® COMSOL Multiphysics®. A complex reaction net was employed, resulting in a model allows for a good agreement with experimentally achieved results. T2 - COMSOL Conference 2010 CY - Paris, France DA - 2010-11-17 KW - Heating KW - Free convection KW - Reactive flow KW - Gas reaction KW - Self ignition PY - 2010 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 1 EP - 7 AN - OPUS4-24174 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Kreißig, Michael A1 - Schmidtchen, Ulrich A1 - Holtappels, Kai T1 - Prevention of the explosion of acetylene cylinders involved in fire: experiments and simulations T2 - 23rd ICDERS 2011 N2 - In order to assess the effectiveness of water cooling of acetylene cylinders involved in fire, a total of 13 bonfire tests with 8.9-, 10 and 50-l-cylinders were performed. During the experiments the pressure in the cylinder and the temperature at different locations within the porous material and on the Shell surface as well as the flame temperature were measured. Overall 8 burst tests were performed, in order to determine the times to explosion for the cylinders. Cylinders failed not later than 15 minutes from the ignition of the bonfire, often with generation of a fireball. During the other 5 tests, the fire was extinguished before the expected burst and the cylinder was cooled with water. In 2 of the 5 extinction experiments, the explosion of the cylinder could be prevented. Noticeably, in one case the on-set of the decomposition of acetylene had already been observed, before the cooling was started. In spite of that, the cooling was still effective. The interpretation of the current results and of the data from previous tests with 40-l-cylinder suggests that single acetylene cylinders involved in fire might be saved by cooling, if their pressure does not exceed a value of about 45 bara. The recorded values of pressure and temperature were used to develop and validate a mathematical model for the prediction of the heat transfer in acetylene cylinders during the exposure to fire and the afterward cooling. The predictions agreed well with the experimental results. T2 - 23rd ICDERS 2011 CY - Irvine, CA, USA DA - 24.07.2011 KW - Acetylene KW - Gas cylinders KW - Fire exposure KW - Decomposition PY - 2011 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. IS - Paper 132 SP - 1 EP - 6 AN - OPUS4-24153 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Komann, Steffen A1 - Neumann, Martin A1 - Ballheimer, Viktor A1 - Wille, Frank A1 - Weber, Mike A1 - Qiao, Linan A1 - Droste, Bernhard T1 - Mechanical assessment within type B packages approval - the application of static and dynamic calculation approaches T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials (Proceedings) T2 - PATRAM 2010 - 16th International symposium on the packaging and transport of radioactive materials CY - London, UK DA - 2010-10-03 KW - Mechanische Bewertung KW - Radioaktives Material KW - Numerische Analyse PY - 2010 SP - 1 EP - 8(?) AN - OPUS4-23384 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bothe, Martin A1 - Binte Gose, H. A1 - Yi Mya, K. A1 - He, Ch. A1 - Pretsch, Thorsten T1 - Dual-Shape Memory Effect in SPOSS-PU T2 - Synthesis and Integration Group Seminar, Institute of Materials Research and Engineering (IMRE) T2 - Synthesis and Integration Group Seminar, Institute of Materials Research and Engineering (IMRE) CY - Singapore DA - 2011-02-23 PY - 2011 AN - OPUS4-23473 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mya, K.Y. A1 - Gose, H.B. A1 - Pretsch, Thorsten A1 - Bothe, Martin A1 - He, C. T1 - Star-shaped POSS-polycaprolactone polyurethanes and their shape memory performance JF - Journal of materials chemistry N2 - Star-shaped polyhedral oligomeric silsesquioxane (SPOSS)-based multi-arm poly(ε-caprolactones) (PCLs) with various arm lengths were synthesized by ring opening polymerization of ε-caprolactone. Increasing the PCL arm lengths was observed to increase the melting temperature and also the melt crystallization temperature in SPOSS-PCLs. Star-shaped POSS-PCL polyurethanes (SPOSS-PUs) were then prepared by cross-linking SPOSS-PCLs with hexamethylene diisocyanate (HMDI) and their shape memory (SM) behaviour was determined. For this purpose two cyclic thermo-mechanical testing concepts with similar programming (deformation and shape fixing) but different recovery strategies (free strain versus fixed-strain constrained stress recovery) were used and the synthesized polymers were systematically investigated around the crystallization and melting temperatures of PCL. SPOSS-PU with the highest POSS content exhibited remarkable cycles-averaged (N = 2–5) shape fixities and strain recoverabilities of 98% and stress recoverabilities close to 100%. The main structural factors that were expected to reduce the SM performances with increasing PCL arm lengths were a lowering of cross-link density (content of octasubstituted POSS) and an increase in chain flexibility/molecular mobility. KW - Shape memory polymer KW - Active polymer KW - Hybrid star-shaped polymer KW - POSS-polycaprolactone polyurethanes KW - Thermo-mechanical properties PY - 2011 DO - https://doi.org/10.1039/c0jm04459h SN - 0959-9428 SN - 1364-5501 VL - 21 IS - 13 SP - 4827 EP - 4836 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-23479 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werrel, Martin A1 - Krüger, Simone A1 - Deubel, Jan A1 - Piechotta, Christian A1 - Fettig, Ina T1 - Cone Calorimeter-Daten als Eingabeparameter für die numerische Simulation von Brandvorgängen T2 - 19. Ulm-Freiberger Kalorimetertage T2 - 19. Ulm-Freiberger Kalorimetertage CY - Freiberg, Germany DA - 2011-03-16 PY - 2011 AN - OPUS4-23409 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rodrigues, M. A1 - Cappa, F. A1 - Schreiner, M. A1 - Ferloni, P. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Woytek, B. A1 - Alram, M. T1 - Further metallurgical analyses on silver coins of Trajan (AD 98-117) JF - Journal of analytical atomic spectrometry N2 - Within an interdisciplinary project, preliminary results of which were published in 2007, a group of 65 silver coins (denarii) of Trajan, evenly distributed over the entire span of his reign (2nd to 6th consulate), as well as 3 coins from the reign of his predecessor, the emperor Nerva (AD 96–98), had been acquired on the coin market. These pieces could be cross-sectioned in order to carry out analyses. Measurements were performed with µ-XRF and µ-SRXRF to check the fineness of the denarius alloy as well as to investigate if the coins of the different consulates showed distinct traits concerning the main impurities which could suggest a change of ore sources. Furthermore, it was examined whether the influx of precious metals into the Roman treasury after Trajan's Dacian campaigns (AD 101/102 and 105/106) could have had any repercussions on the composition of the denarius alloy; comparative data was provided by the analysis of nine imitations of Roman Republican denarii presumably struck in Dacia. Documentation of the cross-sections was performed with SEM/EDX in order to clarify details concerning the specific microstructure of the coins. An enrichment of Ag of approx. 100 to 200 µm in the near surface regions of most of the coins could be observed, which is due to corrosion effects. Previous metallographic analyses done by several scholars had been inadequate to clarify the central numismatic and economic questions. With the presented analyses, it was possible to correct the results of the earlier research and to provide, for the first time, a secure basis of data for the investigation of the development of the silver alloy used for denarii in Trajan's reign. PY - 2011 DO - https://doi.org/10.1039/c0ja00252f SN - 0267-9477 SN - 1364-5544 VL - 26 IS - 5 SP - 873 EP - 1100 PB - Royal Society of Chemistry CY - London AN - OPUS4-23623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Torge, Manfred A1 - Sabel, Martin A1 - Feldmann, Ines A1 - Kohl, Anka T1 - Naturwissenschaftliche Untersuchungen im Rahmen des Projektes 'Konservierung mittelalterlicher Glasmalerei im Kontext spezieller materieller und umweltbedingter Gegebenheiten' T2 - Bauforschung - Denkmalpflege 'Konservierung mittelalterlicher Glasmalerei im Kontext spezieller materieller und umweltbedingter Gegebenheiten' N2 - Nachsicherung geschädigter Zaponlack-Wachs-Sicherungen an den um 1410/20 entstandenen Glasmalereien des Helenafensters nord VIII am Erfurter Dom - Untersuchungen zu Schadensursachen, Schadensphänomenen, Methoden der Nachbehandlung und des Monitorings KW - Glasmalerei KW - Restaurierung KW - Zaponlack PY - 2011 SN - 978-3-8167-8470-8 VL - D 1012 SP - 36 EP - 75 PB - Fraunhofer IRB Verl. CY - Stuttgart AN - OPUS4-23631 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bothe, Martin A1 - Mya, K.Y. A1 - Pretsch, Thorsten T1 - Synthesis of Nanocomposite-based Candidates for Shape Memory Polymers T2 - Synthesis and Integration Group Seminar, Institute of Materials Research and Engineering (IMRE) T2 - Synthesis and Integration Group Seminar, Institute of Materials Research and Engineering (IMRE) CY - Singapore DA - 2011-04-27 PY - 2011 AN - OPUS4-23662 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Scheid, Marc T1 - Staubexplosionen: Gefahren und Schutzmaßnahmen T2 - Behörden-Erfahrungsaustausch, BAM/Umweltbundesamt T2 - Behörden-Erfahrungsaustausch, BAM/Umweltbundesamt CY - Berlin, Germany DA - 2011-05-09 PY - 2011 AN - OPUS4-23666 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Materialforschung an der BAMline T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin CY - Vienna, Austria DA - 2010-01-13 PY - 2010 AN - OPUS4-23605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Musolff, André A1 - Müller, Karsten A1 - Neumann, Martin A1 - Kadji, Arsène Brice A1 - Droste, Bernhard T1 - Results of full scale CONSTOR® V/TC prototype 9 m horizontal drop test JF - Packaging, transport, storage & security of radioactive materials (RAMTRANS) KW - Drop testing KW - Impact limiter KW - Finite element method KW - Full scale cast PY - 2008 DO - https://doi.org/10.1179/174651008X382951 SN - 1746-5095 SN - 1746-5109 SN - 0957-476X VL - 19 IS - 4 SP - 228 EP - 232 PB - Ramtrans Publ. CY - Ashford AN - OPUS4-18625 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Krause, Heike A1 - Schröder, Volkmar A1 - Acikalin, Hatice Aydan A1 - Steinbach, J. T1 - Study of a self heating process of tetrafluoroethylene by the exothermic dimerization reaction to octafluorocyclobutane T2 - Europäische Comsol Conference T2 - Europäische Comsol Conference CY - Hamburg, Germany DA - 2008-11-04 PY - 2008 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. AN - OPUS4-18552 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heuchel, M. A1 - Hölck, Ole A1 - Böhning, Martin A1 - Siegert, R. A1 - Hofmann, D. ED - Qi, Y. ED - H.E. Fang, ED - N. Reynolds, ED - Liu, Z.-K. T1 - Knowledge-based approach to gas sorption in glassy polymers by combining experimental and molecular simulation techniques T2 - MRS Fall Meeting 2008 - Symposium W - Computational Materials Design via Multiscale Modeling (Proceedings) N2 - We present a method which allows to calculate gas sorption in complex polymers where, as slow processes, gas induced plasticization and volume dilation are important factors. Since the relaxational swelling of the polymer matrix that is observed at elevated gas concentrations takes hours or days, the swelling process is orders of magnitudes too slow to simulate the respective molecular dynamics in reasonable time and effort. To address this apparent incompatibility of experiment and simulation, we use single representative reference states from experiment and construct atomistic packing models according to these specifications. Gas sorption of CO2 and CH4 was successfully calculated on polysulfone, a 6FDA-polyimide, and a polymer of intrinsic microporosity, PIM-1, at 308 K and pressures up to 50 bar. T2 - MRS Fall Meeting 2008 - Symposium W - Computational Materials Design via Multiscale Modeling CY - Boston, MA, USA DA - 2008-12-01 KW - Gas sorption KW - Molecular modelling KW - Simulation KW - Glassy polymers PY - 2009 DO - https://doi.org/10.1557/PROC-1130-W06-10 VL - 1130 SP - W06 EP - W10 AN - OPUS4-19106 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Gräfe, Boris A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Streicher, Doreen ED - Christian U. Grosse, T1 - New possibilities for ultrasonic imaging of concrete elements T2 - Advances in Construction Materials 2007 (Proceedings) KW - Beton KW - Zerstörungsfreie Prüfung im Bauwesen (ZfPBau) KW - Ultraschallecho-Verfahren KW - Luftgekoppelter Ultraschall KW - Phased array PY - 2007 SN - 978-3-540-72447-6 SP - 575 EP - 582 PB - Springer CY - Heidelberg AN - OPUS4-19107 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Maack, Stefan A1 - Gräfe, Boris A1 - Mayer, K. T1 - Zerstörungsfreie Prüfung von Betonbauteilen unter besonderer Berücksichtigung von Luftgekoppeltem Ultraschall T2 - Innovative ZfP mit bildgebender Ultraschallprüftechnik, Workshop anlässlich des 25-jährigen Betriebsjubiläums des Ingenieurbüros Dr. Hillger T2 - Innovative ZfP mit bildgebender Ultraschallprüftechnik, Workshop anlässlich des 25-jährigen Betriebsjubiläums des Ingenieurbüros Dr. Hillger CY - Braunschweig, Germany DA - 2009-03-06 PY - 2009 AN - OPUS4-19088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen T1 - Boron isotopes - a new tracer for the origin and authenticity of food T2 - DGMS-Jahrestagung T2 - DGMS-Jahrestagung CY - Konstanz, Germany DA - 2009-03-08 PY - 2009 AN - OPUS4-19134 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Suhendra, Suhendra T1 - Heat Removal from Underground Coal Fires by Heat Pipes T2 - Symposium on Extinction and Prevention of Underground Coal Fires T2 - Symposium on Extinction and Prevention of Underground Coal Fires CY - Ürümqi, China DA - 2009-05-20 PY - 2009 AN - OPUS4-19494 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Hölck, O. A1 - Heuchel, M. A1 - Hofmann, D. T1 - Gas sorption in glassy polymers - Comparative characterization using experimental and molecular modeling techniques T2 - EUROMEMBRANE 2009 Conference T2 - EUROMEMBRANE 2009 Conference CY - Montpellier, France DA - 2009-09-06 PY - 2009 AN - OPUS4-20018 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Strub, Erik A1 - Born, H. T1 - Neues vom Berliner Goldhut: Materialanalysen mit Synchrotronstrahlung JF - Acta praehistorica et archaeologica KW - Sy-RFA KW - Berliner Goldhut PY - 2009 SN - 0341-1184 VL - 41 SP - 29 EP - 35 PB - Marie Leidorf GmbH CY - Berlin AN - OPUS4-20271 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mielentz, Frank A1 - Boehm, Rainer A1 - Krause, Martin A1 - Mayer, K. T1 - Optimierung von Ultraschall-Prüfkopf-Arrays für die zerstörungsfreie Prüfung im Bauwesen mithilfe von Modellierungen T2 - DGZfP-Jahrestagung 2009 T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 KW - Ultraschall KW - Beton KW - Modellierung KW - Schallfeld KW - Punktquellensynthese KW - Elastodynamische Finite Integrationstechnik (EFIT) KW - Prüfkopf KW - Array KW - Gruppenstrahler KW - Phased array PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 (Poster 2) SP - 1 EP - 13 AN - OPUS4-20328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen A1 - Voerkelius, S. T1 - Boron isotope compositions of crop plants: A new tracer for the origin and authenticity of food T2 - TRACE 5th Annual Meeting and Conference T2 - TRACE 5th Annual Meeting and Conference CY - Freising, Germany DA - 2009-04-01 KW - Boron isotopes in food KW - Provenance studies KW - Reference materials KW - Analytical uncertainty PY - 2009 IS - Session A / Part I SP - 1 EP - 2 AN - OPUS4-20293 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina T1 - Complex Resistivity of wood and standing trees T2 - 16th International Symposium on NDT/NDE of Wood T2 - 16th International Symposium on NDT/NDE of Wood CY - Beijing, China DA - 2009-10-12 PY - 2009 AN - OPUS4-20294 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina T1 - Complex Resistivity on Wood T2 - International Workshop on Induced Polarization in Near-Surface Geophysics T2 - International Workshop on Induced Polarization in Near-Surface Geophysics CY - Bonn, Germany DA - 2009-09-30 PY - 2009 AN - OPUS4-20295 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina ED - Zhang, Houjiang ED - Wang, Xiping T1 - Complex resistivity (CR) of wood and standing trees T2 - 16th International symposium on nondestructive testing and evaluation of wood (Proceedings) T2 - 16th International symposium on nondestructive testing and evaluation of wood CY - Beijing, China DA - 2009-10-12 PY - 2009 SP - 10 EP - 15 AN - OPUS4-20313 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Ferrero, Fabio A1 - Kluge, Martin A1 - Holtappels, Kai T1 - COMSOL Multiphysics® as a Tool to Increase Safety in the Handling of Acetylene Cylinders Involved in Fires T2 - COMSOL Conference 2009 (Proceedings) N2 - In this paper a mathematical model for predicting the heating-up of an acetylene cylinder involved in a fire is presented. In the simulations polynomial functions were used to describe the temperature dependency of the thermal properties of the cylinder interior, which is a complex system composed by a solid porous material, a solvent and acetylene dissolved in it. Model equations covered heat conduction in the cylinder interior and at its walls, while the fire surrounding the cylinder was simulated by solving the coupled heat transfer and the momentum equation. Results of the calculations and the effects of some model parameters are discussed. T2 - COMSOL Conference 2009 CY - Milan, Italy DA - 2009-10-14 KW - Acetylene KW - Safety KW - Heat transfer KW - Momentum transfer PY - 2009 SN - 978-0-9825697-0-2 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 1 EP - 5 AN - OPUS4-20261 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nofz, Marianne A1 - Sojref, Regine A1 - Feigl, Michael A1 - Dreßler, Martin A1 - Dörfel, Ilona T1 - Sol-Gel-Aluminiumoxidschichten für den Oxidationsschutz von Hochtemperaturlegierungen, Teil 2 JF - Keramische Zeitschrift KW - Alumosol KW - Sol-Gel-Verfahren KW - Beschichtung KW - Oxidationsschutz PY - 2009 SN - 0023-0561 VL - 61 IS - 5 SP - 272 EP - 277 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-20263 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nofz, Marianne A1 - Sojref, Regine A1 - Feigl, Michael A1 - Dreßler, Martin A1 - Dörfel, Ilona T1 - Sol-Gel-Aluminiumoxidschichten für den Oxidationsschutz von Hochtemperaturlegierungen, Teil 1 JF - Keramische Zeitschrift KW - Alumosol KW - Sol-Gel-Verfahren KW - Beschichtung KW - Oxidationsschutz PY - 2009 SN - 0023-0561 VL - 61 IS - 2-3 SP - 82 EP - 86 PB - DVS-Verl. CY - Düsseldorf AN - OPUS4-20264 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin, Tina T1 - SIP - Tomografie an Bäumen T2 - Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) T2 - Jahrestagung der Deutschen Geophysikalischen Gesellschaft (DGG) CY - Kiel, Germany DA - 2009-03-23 PY - 2009 AN - OPUS4-20296 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bjeoumikhov, A. A1 - Bjeoumikhova, Zemfira A1 - Riesemeier, Heinrich A1 - Radtke, Martin A1 - Wedell, R. T1 - Propagation of synchrotron radiation through nanocapillary structures JF - Physics letters A N2 - The propagation of synchrotron radiation through nanocapillary structures with channel sizes of 200 nm and periods in the micrometer size has been studied experimentally. It was shown that the propagation through individual capillary channels has a mode formation character. Furthermore it was shown that during the propagation through capillary channels the coherence of synchrotron radiation is partially conserved. Interference of beams propagating through different capillary channels is observed which leads to a periodically modulated distribution of the radiation intensity in a plane far from the exit of the structure. These investigations are of high relevance for the understanding of X-ray transmission through nanocapillaries and the appearance of wave properties at this size scale. KW - Polycapillary structure KW - Nanocapillary KW - X-ray optics KW - Wave properties KW - Synchrotron radiation KW - X-ray diffraction PY - 2007 DO - https://doi.org/10.1016/j.physleta.2007.01.092 SN - 0031-9163 SN - 0375-9601 VL - 366 IS - 4-5 SP - 283 EP - 288 PB - North-Holland Publ. Co. CY - Amsterdam AN - OPUS4-20580 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Friese, Martin A1 - Mayer, K. A1 - Ballier, G. T1 - Progress in ultrasonic tendon ducts imaging T2 - 7th International Symposium on Non-destructive Testing in Civil Engineering (NDT-CE) T2 - 7th International Symposium on Non-destructive Testing in Civil Engineering (NDT-CE) CY - Nantes, France DA - 2009-06-30 PY - 2009 AN - OPUS4-20599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Gräfe, Boris A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Friese, Martin A1 - Wiggenhauser, Herbert A1 - Mayer, K. T1 - Ultrasonic Imaging of Post-tensioned Concrete Elements: New Techniques for Reliable Localization of Grouting Defects T2 - Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR) 2008 T2 - Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR) 2008 CY - Cape Town, South Africa DA - 2008-11-24 PY - 2008 AN - OPUS4-20600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin T1 - Boron isotope Composition of Crop Plants T2 - Goldschmidt™2009 T2 - Goldschmidt™2009 CY - Davos, Switzerland DA - 2009-06-21 PY - 2009 AN - OPUS4-20525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Suhendra, Suhendra A1 - Rueter, Horst T1 - Heat Pipes - Suitable for Extinguishing Coal Fires? T2 - 2nd International Conference on Coal Fire Research ICCFR2 T2 - 2nd International Conference on Coal Fire Research ICCFR2 CY - Berlin, Germany DA - 2010-05-19 PY - 2010 AN - OPUS4-21386 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Constantinescu, B. A1 - Vasilescu, A. A1 - Radtke, Martin A1 - Reinholz, Uwe T1 - Micro-SR-XRF studies for archaeological gold identification - the case of carpathian gold and romanian museal objects JF - Applied physics A N2 - In the determination of the provenance of gold in archaeological artifacts, trace elements are more significant than the main components. Several minute fragments of natural Carpathian gold-placer and primary-and some very small (a few milligrams) fragments of archaeological items were studied using micro Synchrotron Radiation X-Ray Fluorescence (micro SR-XRF) at the BESSY Synchrotron Facility in Berlin, Germany. The goal of the study was to identify the trace elements characterizing Carpathian gold, looking especially at Sn, Sb, Pb and Te, and to determine if the gold in the archaeological items is native or refined. Applications to the authentication and provenance of nine Dacian gold bracelets, koson coins and two Bronze Age items are presented. KW - Gold KW - Provenance KW - Archeometry KW - Sy-XRF PY - 2010 DO - https://doi.org/10.1007/s00339-010-5624-1 SN - 0947-8396 VL - 99 IS - 2 SP - 383 EP - 389 PB - Springer CY - Berlin AN - OPUS4-21395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Grunewald, Andreas A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe T1 - SRXRF - measurements at non planar objects: Automatic determination of the angle of inicidence of the exciting X-ray T2 - Synchroton Radiation in Art & Avhaelogy (SR2A-2010) T2 - Synchroton Radiation in Art & Avhaelogy (SR2A-2010) CY - Amsterdam, Netherlands DA - 2010-11-07 PY - 2010 AN - OPUS4-21378 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Martin A1 - Herter, Jürgen A1 - Droste, Bernhard A1 - Hartwig, S. T1 - Compressive behaviour of axially loaded spruce wood under large deformations at different strain rates JF - European journal of wood and wood products N2 - Impact limiting components of packages for the transport of radioactivematerials are often designed as wood filled steel constructions. Wood absorbs major part of the impact energy in order to minimise the impact load acting upon the containment. Dynamic impact experiments with wood filled impact limiters showed different crushing mechanisms for axially loaded wood depending on their lateral constraint. Tests on spruce wood samples (Picea abies) were performed in order to clarify the influence of strain rate from static to 30 s-1 on a) compression strength, b) stress at a global strain level of 50%, and c) energy absorption capacity at 50% deformation, including statistical evaluation of the results. Results were as follows: strain rate increase led to significantly higher compression strength, stress and strain energy at a strain level of 50%. Lateral strain restriction had no effect on compression strength; it had a significant effect on stress and strain energy at strain level of 50%. Therefore, the definition of a general yield curve for wood under large deformations is not possible, the yield curve has to be chosen taking into account lateral constraints. KW - Compression KW - Wood KW - Spruce KW - Picea abies KW - Impact PY - 2011 DO - https://doi.org/10.1007/s00107-010-0442-x SN - 0018-3768 VL - 69 IS - 3 SP - 345 EP - 357 PB - Springer CY - Berlin ; Heidelberg AN - OPUS4-22980 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Behrens, Matthias A1 - Lange, Marco A1 - Maack, Stefan A1 - Milmann, Boris A1 - Wöstmann, Jens A1 - Hintzpeter, F T1 - Bildgebende Ortung von Ablösungen in mehrschichtigen Betonbauteilen mit dem Ultraschallecho-Verfahren T2 - Fachtagung Bauwerksdiagnose, 18.-19.02.2010, Berlin T2 - Fachtagung Bauwerksdiagnose, 18.-19.02.2010, Berlin CY - Berlin, Germany DA - 2010-02-18 PY - 2010 AN - OPUS4-22997 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kluge, Martin A1 - Eliezer, D. A1 - Holtappels, Kai A1 - Krause, Heike A1 - Ried, Peter T1 - Pressure resistance of glass capillary structures for gas storage purposes T2 - 1st International conference on materials for energy (Proceedings) T2 - 1st International conference on materials for energy CY - Karlsruhe, Germany DA - 2010-07-04 KW - Dimerization KW - Numerical simulation KW - CFD KW - FEM KW - Self heating KW - TFE PY - 2010 SN - 978-3-89746-117-8 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. SP - 752 EP - 754 AN - OPUS4-23042 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Holtappels, Kai A1 - Kluge, Martin A1 - Gebauer, Marek A1 - Eliezer, D. T1 - Pressure resistance of glass capillaries for hydrogen storage JF - Materials Testing N2 - Ein entscheidendes Problem neuer Wasserstofftechnologien ist die leichte und sichere Lagerung ausreichender Mengen an Wasserstoff insbesondere für Nutzung bei tragbaren oder mobilen Anwendungen. Eine neue und innovative Technologie basierend auf gebündelte Kapillaren wurde entwickelt. Diese Systeme garantieren eine sichere Speicherung, Lagerung und kontrollierte Freisetzung von Wasserstoff, obgleich Speicherdrücke bis 1200 bar angewendet werden. Die neue Technologie ermöglicht die Lagerung einer erheblich größeren Menge Wasserstoff als andere Systeme und übertraf bereits die Zielsetzung des DOE 2010. Es wird erwartet, die DOE-Zielsetzung für das Jahr 2015 bereits in naher Zukunft zu erreichen. Hauptaspekt für die Speichertechnologie ist die Druckfestigkeit der Glaskapillaren. Es ist weithin bekannt, dass besonders Quarz eine dreimal höhere Festigkeit als Stahl hat. Gleichzeitig ist die Dichte ungefähr dreimal niedriger, was bedeutet, dass viel weniger Material notwendig ist, um die gleiche Druckfestigkeit zu erreichen. Die Druckfestigkeit einzelner Kapillare ist in der Abhängigkeit der Materialien, der Abmessungen, der Wandstärke etc. ermittelt worden, um optimale Parameter für die "finalen" Kapillaren herauszufinden. KW - Wasserstoffspeicherung KW - Glasstruktur KW - Druckefestigkeit KW - Berstdruck PY - 2011 SN - 0025-5300 N1 - Geburtsname von Kluge, Martin: Beckmann-Kluge, M. - Birth name of Kluge, Martin: Beckmann-Kluge, M. VL - 53 IS - 1-2 SP - 14 EP - 18 PB - Hanser CY - München AN - OPUS4-23043 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hodoroaba, Vasile-Dan A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Vincze, L. A1 - Reuter, Dirk T1 - X-ray scattering in X-ray fluorescence spectra with X-ray monochromatic, polarised excitation - modelling, experiment, and Monte-Carlo simulation JF - Nuclear instruments and methods in physics research B N2 - A systematic series of measurements has been carried out with monochromatic X-ray excitation with synchrotron radiation in order to check a physical model on X-ray scattering. The model has recently been successfully tested for the case of polychromatic, unpolarised excitation emitted by an X-ray tube. Our main purpose is the modelling of a physical background in X-ray fluorescence spectra, so that improved quantitative results can be achieved especially for strongly scattering specimens. The model includes single Rayleigh and Compton scattering in the specimen, the effect of bound electrons, the challenging Compton broadening and the polarisation degree. Representative specimens, measurement geometries and excitation energies have been selected with synchrotron monochromatic light at BAMline/BESSY II. Monte-Carlo simulations have been also carried out in order to evaluate the quality of the results achieved with the model. KW - X-ray scattering KW - Monochromatic excitation KW - Polarisation KW - Modelling KW - Monte-Carlo simulation PY - 2011 DO - https://doi.org/10.1016/j.nimb.2011.04.009 SN - 0168-583X SN - 1872-9584 VL - 269 IS - 13 SP - 1493 EP - 1498 PB - Elsevier CY - Amsterdam AN - OPUS4-23765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bothe, Martin A1 - Pretsch, Thorsten A1 - Khine, Y. A1 - Chaobin, H. T1 - Star-shaped poly(caprolactone-urethane) networks: Approach to modify shape memory properties T2 - Polymer Degradation Discussion Group, 29th PDDG Conference T2 - Polymer Degradation Discussion Group, 29th PDDG Conference CY - Sestri Levante, Italy DA - 2011-09-05 PY - 2011 AN - OPUS4-24289 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Wu, D. A1 - Norman, F. A1 - Vanierschot, M. A1 - Verplaetsen, F. A1 - Berghmans, J. A1 - van den Bulck, E. T1 - Numerical investigation on the self-ignition behaviour of coal dust accumulations: The roles of oxygen, diluent gas and dust volume JF - FUEL 188 N2 - Self-ignition of coal dust deposits poses a higher risk of fires in oxygen-enriched oxy-fuel combustion systems. In this work, we develop a numerical method, using the commercial software COMSOL Multiphysics, to investigate self-ignition behaviour of coal dust accumulations with a main emphasis on the roles of oxygen, diluent gas and dust volume. A one-step 2nd-order reaction kinetic model considering both coal density and oxygen density is used to estimate reaction rate using the kinetic parameters from previously conducted hot-oven tests. This model is validated to predict the transient temperature and concentration profiles of South African coal dusts until ignition. The computed self-ignition temperatures of dust volumes show a good agreement with experimental results. In addition, it is found that the inhibiting effect of carbon dioxide is comparatively small and oxygen consumption increases dramatically after ignition. Parameter analysis shows that the heating value and kinetic parameters have a comparatively pronounced effect on self-ignition temperature. The model provides a satisfactory explanation for the dependence of self-ignition behaviour on gas atmospheres, thus helping to further understand the fire risk of self-ignition in oxy-fuel combustion systems. KW - Ignition temperature KW - Oxy-fuel combustion KW - Fire safety KW - Self-ignition KW - Numerical simulation PY - 2017 DO - https://doi.org/10.1016/j.fuel.2016.10.063 SN - 0016-2361 SP - 500 EP - 510 AN - OPUS4-37885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Kreißig, Michael A1 - Liebner, Christian A1 - Spoormaker, Tom ED - DeRademacher, E. ED - Schmelzer, P. T1 - Identifying hazardous conditions for rapid compression scenarios of chemically unstable gases in industrial scaled pipes T2 - Chemical Engineering Transactions N2 - The polymeric industry handles Tetrafluoroethylene (TFE) as basic material for polymer (PTFE) and co-polymer (PCTFE) production. As a chemically unstable gas, it can react in an explosive way, without the presence of any other gases. Once initiated such an exothermic reaction can propagate through the pipe system of a plant and might lead to massive damages and/or fatalities. Especially after maintenance parts of the pipe systems can be filled with TFE, nitrogen or air at pressures up to atmospheric conditions whereas connected parts of pipes might still contain TFE at operating pressure state. Many of the regarding pipes are separated by ball valves, which allow a fast opening procedure. Thereby fast compression of the gas can occur and lead to a massive temperature increase which might induce unwanted reactions. Former tests in laboratory scale described by Meyer (2009) allowed an ignition of a TFE/air system by rapid compression only for a set of sharp defined boundary conditions. First tests in the lower industrial scale were done by Ferrero et al. (2013), where an ignition at typical industrial operating conditions was initiated. The results of the tests indicated that the critical achievable compression temperatures strongly depend on the setup and therefore on the pipe diameter as well. Therefore the necessity of further tests has been pointed out. The original setup presented by Ferrero (2013), which represents the smallest typical industrial size with an inner diameter of 1.125”, was modified to withstand an explosive decomposition reaction and to avoid a deflagration to detonation transition. Different safety concepts as burst discs and time controlled cut-off valves had been tested and evaluated to optimize the experimental setup for reproducible test conditions. This allowed the systematic investigation of the rapid compression of TFE–systems for the first time in the described scale without serious damages after an ignition. In the donor pipe always TFE at high pressure and in the receiving pipe TFE, nitrogen or air were present at an absolute pressure ranging from 500 Pa to atmospheric pressure. The scope was to generate a “hazard diagram” in which the ignition probability in dependence of donor (high) pressure and the receiving (low) pressure is shown. Hazardous conditions can easily be determined. A reference method for the maximum achievable temperatures of non-reacting gas systems was created using an air/air-system. Thus reactive TFE-systems could be evaluated regarding additional exothermic effects. The final hazard diagram demonstrates that there is no sharp limit between a “safe” state and an “ignition” for a TFE/air-system. Rather a transition range exists, which decreases with rising donor pressure. An increased temperature in this range, sometimes combined with small pressure peaks in the profile, indicates first partial restricted reactions near the end flange. The more it gets closer to the “ignition” transition the more traces like soot or undefined solid fractions were found. A TFE/nitrogen- and a TFE/TFE-system could not be ignited at all. A description of the experimental tests as well as a detailed explanation of the hazard diagram will be presented. T2 - 15th International Symposium on Loss Prevention and Safety Promotion in the Process Industries and accompanying exhibition CY - Freiburg, Germany DA - 05.06.2016 KW - explosion KW - adiabatic compression KW - self ignition KW - plant safety KW - decomposable gas KW - fire PY - 2016 SN - 978-88-95608-39-6 DO - https://doi.org/10.3303/CET1648102 SN - 2283-9216 VL - 48 SP - 607 EP - 612 PB - AIDIC Servizi S.r.l. CY - Milano, Italy AN - OPUS4-37917 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Blanchard, R. A1 - Holtappels, Kai A1 - Kluge, Martin A1 - Schildberg, H.-P. A1 - Zeps, Robert ED - de Rademacher, E. ED - Schmelzer, P. T1 - Sizing of Explosion Pressure Relief using the Efflux Function T2 - Chemical Engineering Transactions N2 - Determination of deflagration venting requirements in chemical/process plants is usually carried out using well established standards employing an empirically based formula. However, this formula is shown to have severe shortcomings, especially in the range of low KG-values, where either negative or inconceivably large venting areas can be predicted. Due to these shortcomings a method has been developed using the efflux function for gases as a basis to predict the mass flow through a vent opening in a vessel during an internal explosion. The simulated rise in pressure due to the internal explosion is quantitatively determined from the KG-value, with the mass flow through the vent opening in the vessel resulting from the pressure difference between the vessel and its surroundings. This enables the maximum overpressure as a function of the pressure relief surface area to be predicted. The method takes into account the temperature of the efflux gases and turbulence enhancement brought about by the venting process. In the following paper explosion pressure relief experiments are described and the results from these experiments are compared to predictions from the efflux method. It is shown that by adjusting the assumed turbulence which evolves during the venting process, the reduced explosion pressure can be reasonably well reproduced. T2 - 15th International Symposium on Loss Prevention and Safety Promotion in the Process Industries and accompanying exhibition CY - Freiburg, Germany DA - 05.06.2016 KW - Deflagration KW - Explosion KW - Pressure relief KW - Venting KW - Efflux PY - 2016 SN - 978-88-95608-39-6 DO - https://doi.org/10.3303/CET1648082 SN - 2283-9216 VL - 48 SP - 487 EP - 492 PB - AIDIC Servizi S.r.l CY - Milano, Italy AN - OPUS4-37918 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Liebner, Christian A1 - Spoormaker, Tom A1 - Kreißig, Michael T1 - Schlagartige Kompression chemisch instabiler Gase im industriellen Maßstab – am Beispiel von Tetrafluorethen N2 - Tetrafluorethen wird von der Polymerindustrie seit Jahrzenten als monomeres Ausgangsmaterial sowohl für die Herstellung von Polymeren (PTFE) als auch für Kopolymere (PCTFE) eingesetzt. Aufgrund seiner Eigenschaft als chemisch instabiles Gas kann TFE auch ohne Luftsauerstoff oder einen anderen Oxydator explosionsartig zerfallen. Nach der Initiierung des Zerfalls kann dieser unter bestimmten Bedingungen aufgrund des exothermen Reaktionsverhaltens sich selbstständig in Apparaten und Rohrleitungen ausbreiten. Dies geht aufgrund der freigesetzten Reaktionsenthalpie mit einem schlagartigen Anstieg von Druck und Temperatur einher, was zu erheblichen Belastungen der Materialien bis hin zum Versagen und Bruch und möglichen Folgeschäden einschließlich Personenschäden führen kann und in der Vergangenheit bereits mehrfach geführt hat. Besonders nach Wartungsarbeiten besteht die Gefahr, dass Teilabschnitte im Rohrleitungssystem mit TFE, Stickstoff oder Luft gefüllt sind mit Drücken in einem Bereich zwischen technischem Vakuum und atmosphärischem Druck wohingegen angrenzende Rohrabschnitte oder Behälter immer noch TFE bei Betriebsdrücken bis 32 bar enthalten können. Dabei sind die Abschnitte in der Praxis häufig durch Kugelhähne voneinander getrennt, die aufgrund ihrer Öffnungscharakteristik bereits bei geringen Betätigungswinkeln eine große Querschnittsfreigabe für die Strömung im Rohr ermöglichen. Dadurch können schlagartige Kompressionsvorgänge des Gases im Niederdruckbereich ermöglicht werden, die allein aufgrund der thermodynamischen Zustandsänderung zu einer erheblichen Temperaturerhöhung führen und im schlimmsten Fall zur Initiierung der Zerfallsreaktion führen können. Es wird erstmalig ein Versuchsaufbau im Industriemaßstab, der einer explosionsartigen Zerfallsreaktion von TFE standhalten kann. Zahlreiche Sicherheitskonzepte einschließlich diverser Berstscheibenkonfigurationen als auch zeitgesteuerte Schnellschlussventile wurden eingehend untersucht und bewertet, um die optimale Versuchskonfiguration für bestmögliche Reproduzierbarkeit festzulegen. Es fand eine systematische Untersuchung der schlagartigen Kompression der Systeme Luft/Luft, TFE/Luft, TFE/TFE und TFE/N2 statt. In der Hochdrucksektion wurden Drücke bis 30 bar realisiert und im Niederdrucksektor konnten Anfangsdrücke im Bereich weniger Millibar bis hin zu Atmosphärendruck eingestellt werden. Als Hauptergebnis wurde ein „Hazard diagram“ erstellt, mit dessen Hilfe die Zündwahrscheinlichkeit in Abhängigkeit vom Hochdruck und Niederdruck abgeschätzt werden kann. Gefährliche Bedingungen in Rohrleitungen können dadurch auf einfachem Weg identifiziert werden. Als Referenzsystem zur Beurteilung der maximal erreichbaren nicht reaktiven Kompressions-temperaturen wurde Luft/Luft verwendet. Die damit ermittelten Daten dienten zur Bewertung von zusätzlichen exothermen Effekten, wie sie etwa bei Vorreaktion des TFE im Falle einer Dimerisierung auftreten können. Entgegen der ursprünglichen Annahme konnten die Systeme TFE/Stickstoff und TFE/TFE im verwendeten Aufbau nicht durch Kompressionsvorgänge gezündet werden. T2 - 12. Fachtagung Anlagen-, Arbeits-und Umweltsicherheit CY - Köthen, Germany DA - 05.11.2015 KW - TFE KW - Adiabate Kompression KW - Explosion KW - Zerfallsfähige Gase KW - Anlagensicherheit PY - 2015 AN - OPUS4-37919 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, S. A1 - Walnsch, A. A1 - Nolze, Gert A1 - Leineweber, A. A1 - Léaux, F. A1 - Scheuerlein, C. T1 - The crystal structure of (Nb0.75Cu0.25)Sn-2 in the Cu-Nb-Sn system JF - Intermetallics N2 - During the processing of superconducting Nb3Sn wire, several intermediate intermetallic phases including a previously encountered Cu-Nb-Sn phase show up. The yet unknown crystal structure of this phase is now identified by a combination of different experimental techniques and database search to be of the hexagonal NiMg2 type with a proposed composition of about (Nb0.75Cu0.25)Sn2. The structure determination started from an evaluation of the lattice parameters from EBSD Kikuchi patterns from quenched material suggesting hexagonal or orthorhombic symmetry. A database search then led to the hexagonal NiMg2 type structure, the presence of which was confirmed by a Rietveld analysis on the basis of high energy synchrotron X-ray powder diffraction data. Assuming a partial substitution of Nb in orthorhombic NbSn2 by Cu, the change of the valence electron concentration provokes a structural transformation from the CuMg2 type for NbSn2 to the NiMg2 type for (Nb0.75Cu0.25)Sn2. In the previous literature the (Nb0.75Cu0.25)Sn2 phase described here has occasionally been referred to as Nausite. KW - Electron backscatter diffraction KW - X-ray diffraction KW - Intermetallic compound KW - Structure solution KW - Superconductor PY - 2017 DO - https://doi.org/10.1016/j.intermet.2016.09.008 SN - 0966-9795 SN - 1879-0216 VL - 80 SP - 16 EP - 21 PB - Elsevier Ltd. AN - OPUS4-37874 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard T1 - Introduction of BAM safety assessment experience feedback list T2 - Proceedings of PATRAM 2016 N2 - BAM as competent authority regarding assessment of mechanical and thermal design, activity release and quality assurance aspects of SNF and HLW transport packages developed a thesaurus of experience feedback topics from recent approval procedures. The list is structured according to the European PDSR guide. It involves issues, which from BAM point of view, needed clarification during last package design assessment procedures. The list contains issues from operation (e.g. deactivation of handling lugs not intended for package handling), maintenance (e.g. leak tightness of impact limiting devices) to technical assessment (e.g. formation of hydrogen by radiolysis and its impact on pressure and ignitability, consideration of ageing mechanisms, thermo-mechanical assessment, impact of gaps between content and flask, spent fuel behaviour) as well as to general and specific safety analysis report requirements (e.g. report structure and required data). T2 - PATRAM 2016 CY - Kobe, Japan DA - 18.09.2016 KW - Experience feedback list KW - Radioactive material KW - Transport PY - 2016 UR - http://www.patram2016.org/ SP - Paper 4002, 1 AN - OPUS4-37850 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard T1 - Introduction of BAM safety assessment experience feedback list N2 - BAM as competent authority regarding assessment of mechanical and thermal design, activity release and quality assurance aspects of SNF and HLW transport packages developed a thesaurus of experience feedback topics from recent approval procedures. The list is structured according to the European PDSR guide. It involves issues, which from BAM point of view, needed clarification during last package design assessment procedures. The list contains issues from operation (e.g. deactivation of handling lugs not intended for package handling), maintenance (e.g. leak tightness of impact limiting devices) to technical assessment (e.g. formation of hydrogen by radiolysis and its impact on pressure and ignitability, consideration of ageing mechanisms, thermo-mechanical assessment, impact of gaps between content and flask, spent fuel behaviour) as well as to general and specific safety analysis report requirements (e.g. report structure and required data). T2 - PATRAM 2016 CY - Kobe, Japan DA - 18.09.2016 KW - Experience feedback list KW - Radioactive material KW - Transport PY - 2016 AN - OPUS4-37852 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Nehrig, Marko A1 - Bletzer, Claus A1 - Musolff, André A1 - Erenberg, Marina A1 - Wille, Frank T1 - Behaviour of Wood Filled Impact Limiters during Fire Test T2 - Proceedings of the 18th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2016) N2 - Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood, encapsulated by steel sheets. These impact limiters shall ensure the transport cask meets the mechanical and thermal IAEA regulatory test requirements. After damage caused by the mechanical tests the package has to withstand a severe fire scenario. According to the regulations during and following the thermal test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally. Corresponding to results of the French institute IRSN combustion and smouldering of wood inside the impact limiter occurred during and after the fire test. An additional energy supply from a pre-damaged impact limiter to the cask could be the consequence for the safety assessment of the containment. BAM started a first test phase to examine the issue of combustion for such kind of package components. The goal was to understand the phenomena under the consideration of relevant regulatory boundary conditions. Several metal buckets were filled with wood and equipped with thermocouples. The test specimens have been prepared with different damage arrangements to take the influence of the mechanical tests into account. This paper shows the experimental setup and the conduction of the tests. The first test shows that pre-damaged metal encapsulations can lead to smouldering of the wood and with this to a supplement energy release after the end of the 30 minute fire. BAM is in the preparation process for a second test phase. A thermal test will take place with a wood filled test specimen weighing about 2Mg. T2 - The 18th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2016) CY - Kobe, Japan DA - 18.09.2016 KW - Large scale testing KW - Fire test KW - Impact limiter KW - Shock absorber KW - Thermal test KW - Typ-B KW - Wood KW - Smouldering PY - 2016 SP - paper no. 1011 AN - OPUS4-37854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Nehrig, Marko A1 - Bletzer, Claus A1 - Musolff, André A1 - Erenberg, Marina A1 - Wille, Frank T1 - Behaviour of Wood Filled Impact Limiters during Fire Test N2 - Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood, encapsulated by steel sheets. These impact limiters shall ensure the transport cask meets the mechanical and thermal IAEA regulatory test requirements. After damage caused by the mechanical tests the package has to withstand a severe fire scenario. According to the regulations during and following the thermal test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally. Corresponding to results of the French institute IRSN combustion and smouldering of wood inside the impact limiter occurred during and after the fire test. An additional energy supply from a pre-damaged impact limiter to the cask could be the consequence for the safety assessment of the containment. BAM started a first test phase to examine the issue of combustion for such kind of package components. The goal was to understand the phenomena under the consideration of relevant regulatory boundary conditions. Several metal buckets were filled with wood and equipped with thermocouples. The test specimens have been prepared with different damage arrangements to take the influence of the mechanical tests into account. This paper shows the experimental setup and the conduction of the tests. The first test shows that pre-damaged metal encapsulations can lead to smouldering of the wood and with this to a supplement energy release after the end of the 30 minute fire. BAM is in the preparation process for a second test phase. A thermal test will take place with a wood filled test specimen weighing about 2Mg. T2 - PATRAM 2016 CY - Kobe, Japan DA - 18.09.2016 KW - Burning KW - Fire test KW - Impact limiter KW - Shock absorber KW - Thermal test KW - Typ-B KW - Wood KW - Smouldering KW - Large scale testing PY - 2016 AN - OPUS4-37842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard A1 - Feldkamp, Martin A1 - Linnemann, Konrad T1 - Experience feedback from BAM safety assessment of transport packages N2 - In order to facilitate approval procedures and reduce effort BAM has filed a list of recently encountered issues during different approval procedures. This presentation shows different examples from the list, which are structured according to the PDSR guide. T2 - RAM Tage CY - Berlin, Germany DA - 16.03.2016 KW - Experience feedback list KW - Radioactive material PY - 2016 AN - OPUS4-37848 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Bestimmung von Korrosionsabträgen an Zink mittels gelartiger Elektrolyte N2 - Das Poster zeigt eine Methode zur Bestimmung von Korrosionsraten und Korrosionsabträgen an Zink durch Verwendung von gelartigen Elektrolyten. T2 - Jahrestagung 2016 der GfKORR CY - Frankfurt/Main, Germany DA - 15.11.2016 KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Verzinkungen KW - Zinc coatings KW - Korrosionsabtrag KW - Corrosion loss PY - 2016 AN - OPUS4-38298 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Emmerling, Franziska ED - de Oliveira Guilherme Buzanich, Ana T1 - Time- and spatial-resolved X-ray absorption fine structure (XAFS) spectroscopy in a single-shot: new analytical possibilities for in situ material characterization JF - Journal of Synchrotron Radiation N2 - A new concept that comprises both time- and lateral-resolved X-ray absorption fine-structure information simultaneously in a single shot is presented. This uncomplicated set-up was tested at the BAMline at BESSY-II (Berlin, Germany). The primary broadband beam was generated by a double multilayer monochromator. The transmitted beam through the sample is diffracted by a convexly bent Si (111) crystal, producing a divergent beam. This, in turn, is collected by either an energy-sensitive area detector, the so-called color X-ray camera, or by an area-sensitive detector based on a CCD camera, in θ-2θ geometry. The first tests were performed with thin metal foils and some iron oxide mixtures. A time resolution of lower than 1 s together with a spatial resolution in one dimension of at least 50 µm is achieved. KW - Single-shot XAFS KW - Time resolution KW - Spatial resolution KW - Divergent XAFS PY - 2016 DO - https://doi.org/10.1107/S1600577516003969 SN - 1600-5775 VL - 23 SP - 769 EP - 776 PB - International Union of Crystallography AN - OPUS4-38370 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas A1 - Müller, Thoralf T1 - Process and material-related causes for corrosion defects on stainless steels T2 - Technical Colloquium 2015 der BGH Siegen T2 - Technical Colloquium 2015 der BGH Siegen CY - Siegen DA - 2015-09-17 PY - 2015 AN - OPUS4-34240 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Wittig, Günther T1 - Application of a signal reconstruction method to evaluate pulsed eddy-current signals JF - NDT international PY - 1985 SN - 0308-9126 VL - 18 IS - 5 SP - 251 EP - 256 PB - Elsevier CY - Amsterdam AN - OPUS4-34228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wittig, Günther A1 - Thomas, Hans-Martin A1 - Maser, Dieter T1 - Eigenschaften von Tastspulen für die Anwendung des Impuls-Wirbelstromverfahrens JF - Materialprüfung = Materials testing PY - 1985 SN - 0025-5300 VL - 27 IS - 5 SP - 123 EP - 126 PB - Carl Hanser Verlag CY - München AN - OPUS4-34229 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin A1 - Maser, Dieter A1 - Hennig, P. T1 - Application of the pulsed-eddy-current techniques for the inspection of the austenitic cladding in a thermal shock loaded nozzle of a pressure vessel T2 - Proceedings of the 6th international conference on NDE in the nuclear industry and equipment/service exposition T2 - 6th International Conference on NDE in the Nuclear Industry and Equipment CY - Zürich, Switzerland DA - 1983-11-28 PY - 1984 SN - 0-87170-192-8 SP - 665 EP - 674 PB - American Society for Metals CY - Metals Park, Ohio AN - OPUS4-34232 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin-Sanchez, Pedro Maria T1 - Quantitative PCR Assays for Monitoring Microorganisms Associated with Biodeterioration Cases T2 - XXV Spanish Microbiology Society Congress T2 - XXV Spanish Microbiology Society Congress CY - Logrono, Spain DA - 2015-07-06 PY - 2015 AN - OPUS4-34255 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krüger, Simone A1 - Deubel, Jan A1 - Werrel, Martin A1 - Fettig, Ina A1 - Raspe, Tina T1 - Experimental studies on the effect of fire accelerants during living room fires and detection of ignitable liquids in fire debris JF - Fire and materials N2 - Reconstructing the course of a fire and performing chemical analysis of ignitable liquids in fire debris is an important tool to conduct fire investigations in suspected arson cases. Here, a total of five fire tests has been performed to investigate the effect of fire accelerants on the fire development of a room fire and to prove the capability of analytical methods. Different experimental scenarios have been realized (no accelerant, accelerant applied at different positions, and different amounts of fire accelerant). Each test room was equipped with an identical set of living room furnishing. The location and amount of the fire accelerant applied löschen varied in four of five tests. One experiment was carried out without fire accelerant. Fire quantities such as mass loss (of the entire room), gas temperatures (at several locations in the room), and heat release were determined during the experiments, and chemical-analytical studies were carried out. A headspace solid phase micro extraction procedure, using gas chromatography–mass spectrometry, was used to analyze fire debris samples to potentially detect ignitable liquids. Beside the analysis of fire debris samples, swipe soot samples were analyzed and the detectability of the fire accelerant used was demonstrated. Results show that it is possible to provide evidence of ignitable liquids in soot samples collected from walls. This allows an additional sampling strategy at potential crime scenes, besides taking fire debris samples. KW - Fire behavior KW - Room fire test KW - Heat release KW - Temperatures KW - Fire debris KW - Ignitable liquids KW - Solid phase microextraction KW - Gas chromatography PY - 2015 DO - https://doi.org/10.1002/fam.2263 SN - 0308-0501 SN - 1099-1018 VL - 39 IS - 7 SP - 636 EP - 646 PB - Heyden CY - London AN - OPUS4-34550 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mauke, R. A1 - Effner, Ute A1 - Milmann, Boris A1 - Völker, Christoph A1 - Wiggenhauser, Herbert T1 - Ultrasonic testing of a sealing construction made of salt concrete in an underground disposal facility for radioactive waste T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering (Proceedings) T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 2015-09-15 KW - Ultrasonic reflection measurement KW - Dry contact transducers in boreholes KW - Interface salt-concrete / rock salt KW - Ultrasonic imaging of internal reflectors PY - 2015 SN - 1435-4934 SP - 696 EP - 699 AN - OPUS4-34537 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wiggenhauser, Herbert A1 - Samokrutov, A.A. A1 - Mayer, K. A1 - Krause, Martin A1 - Alekhin, S. G. A1 - Elkin, V. T1 - LAUS - Large aperture ultrasonic system - for testing thick concrete structures JF - The e-journal of nondestructive testing & ultrasonics N2 - A Large Aperture UltraSonic (LAUS) system has been designed and built for testing thick concrete structures. The scalable system consists of twelve ultrasonic units, each hosting 32 individual shear wave transducers with mechanical dry point contact (DPC) to the concrete surface. The twelve units are attached to the concrete surface using a vacuum case which holds them in place during operation. Each LAUS unit can be placed individually depending on the surface condition and optimal ultrasonic condition, e.g. rebar position. Air pressure is supplied to each unit through an air hose. The following extended abstract is a short version of an article to be published in the special edition of ASCE JIS that will describe the outline of the system, the principle of functioning, the data processing and adapted reconstruction calculation based on SAFT as well as the system performance during first applications. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 15.09.2015 KW - Ultrasonic imaging KW - Linear array KW - Reconstruction calculation (SAFT) PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-345383 UR - http://www.ndt.net/?id=18313 SN - 1435-4934 VL - 20 IS - 11 SP - 1 EP - 4 PB - NDT.net CY - Kirchwald AN - OPUS4-34538 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gauert, C. A1 - Schannor, M. A1 - Hecht, L. A1 - Radtke, Martin A1 - Reinholz, Uwe T1 - A comparison of in situ analytical methods for trace element measurement in gold samples from various South African gold deposits JF - Geostandards and geoanalytical research N2 - Trace element concentrations in gold grains from various geological units in South Africa were measured in situ by field emission-electron probe microanalysis (FE-EPMA), laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) and synchrotron micro X-ray fluorescence spectroscopy (SR-µ-XRF). This study assesses the accuracy, precision and detection limits of these mostly non-destructive analytical methods using certified reference materials and discusses their application in natural sample measurement. FE-EPMA point analyses yielded reproducible and discernible concentrations for Au and trace concentrations of S, Cu, Ti, Hg, Fe and Ni, with detection limits well below the actual concentrations in the gold. LA-ICP-MS analyses required larger gold particles (> 60 µm) to avoid contamination during measurement. Elements that measured above detection limits included Ag, Cu, Ti, Fe, Pt, Pd, Mn, Cr, Ni, Sn, Hg, Pb, As and Te, which can be used for geochemical characterisation and gold fingerprinting. Although LA-ICP-MS measurements had lower detection limits, precision was lower than FE-EPMA and SR-µ-XRF. The higher variability in absolute values measured by LA-ICP-MS, possibly due to micro-inclusions, had to be critically assessed. Non-destructive point analyses of gold alloys by SR-µ-XRF revealed Ag, Fe, Cu, Ni, Pb, Ti, Sb, U, Cr, Co, As, Y and Zr in the various gold samples. Detection limits were mostly lower than those for elements measured by FE-EPMA, but higher than those for elements measured by LA-ICP-MS. N2 - Les concentrations en éléments traces de grains d'or provenant de différentes unités géologiques d'Afrique du Sud ont été mesurées in situ par microsonde électronique à émission de champ (FE-EPMA), spectrométrie de masse couplée à une source plasma et un système d'ablation laser (LA-ICP-MS) et micro spectroscopie de fluorescence des rayons X au Synchrotron (SR-µ-XRF). Cette étude évalue l'exactitude, la précision et les limites de détection de ces méthodes d'analyse pour la plupart non-destructives en utilisant des matériaux de référence certifiés, et discute de leur application dans les mesures sur échantillon naturel. Les points d'analyses FE-EPMA ont fournis des concentrations reproductibles et discernables pour l'Au et des concentrations en traces de S, Cu, Ti, Hg, Fe et Ni, avec des limites de détection bien inférieures aux concentrations réelles dans l'or. Les analyses LA-ICP-MS ont nécessitées des particules d'or de plus grande taille (> 60 µm) pour éviter toute contamination pendant la mesure. Les éléments mesurés au-dessus des limites de détection inclus Ag, Cu, Ti, Fe, Pt, Pd, Mn, Cr, Ni, Sn, Hg, Pb, A et Te, qui peuvent être utilisés pour les caractérisations géochimique et le «fingerprinting» de l'or. Bien que les mesures LA-ICP-MS aient des limites de détection plus basses, la précision est inférieure par rapport à celles de la microsonde FE et de la SR-µ-XRF. La plus grande variabilité des valeurs absolues mesurées par LA-ICP-MS, probablement reliée à la présence de micro-inclusions, a du être évaluée de manière critique. Les points d'analyse non-destructifs des alliages d'or par SR-µ-XRF ont révélés la présence de Ag, Fe, Cu, Ni, Pb, Ti, Sb, U, Cr, Co, As, Y et Zr dans les différents échantillons. Les limites de détection ont été pour la plupart inférieures à celles des éléments mesurés par FE-EPMA, mais supérieures à celles des éléments mesurés par LA-ICP-MS. KW - Trace elements KW - Gold KW - FE-EPMA KW - LA-ICP-MS KW - SR-µ-XRF KW - Precision KW - Précision KW - Comparison of techniques KW - Éléments traces PY - 2016 DO - https://doi.org/10.1111/j.1751-908X.2015.00362.x SN - 1639-4488 SN - 1751-908X VL - 40 IS - 2 SP - 267 EP - 289 PB - Blackwell CY - Oxford AN - OPUS4-34882 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Kreißig, Michael A1 - Liebner, Christian A1 - Spoormaker, T. T1 - Identifizierung von sicherheitstechnisch gefährlichen Bedingungen für schlagartige Kompressionsvorgänge chemisch instabiler Gase im industriellen Maßstab T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - Tetrafluorethen wird von der Polymerindustrie seit Jahrzenten als monomeres Ausgangsmaterial sowohl für die Herstellung von Polymeren (PTFE) als auch für Kopolymere (PCTFE) eingesetzt. Aufgrund seiner Eigenschaft als chemisch instabiles Gas kann TFE auch ohne Luftsauerstoff oder einen anderen Oxydator explosionsartig zerfallen. Nach der Initiierung des Zerfalls kann dieser unter bestimmten Bedingungen aufgrund des exothermen Reaktionsverhaltens sich selbstständig in Apparaten und Rohrleitungen ausbreiten. Dies geht aufgrund der freigesetzten Reaktionsenthalpie mit einem schlagartigen Anstieg von Druck und Temperatur einher, was zu erheblichen Belastungen der Materialien bis hin zum Versagen und Bruch und möglichen Folgeschäden einschließlich Personenschäden führen kann und in der Vergangenheit bereits mehrfach geführt hat. Besonders nach Wartungsarbeiten besteht die Gefahr, dass Teilabschnitte im Rohrleitungssystem mit TFE, Stickstoff oder Luft gefüllt sind mit Drücken in einem Bereich zwischen technischem Vakuum und atmosphärischem Druck wohingegen angrenzende Rohrabschnitte oder Behälter immer noch TFE bei Betriebsdrücken bis 32 bar enthalten können. Dabei sind die Abschnitte in der Praxis häufig durch Kugelhähne voneinander getrennt, die aufgrund ihrer Öffnungscharakteristik bereits bei geringen Betätigungswinkeln eine große Querschnittsfreigabe für die Strömung im Rohr ermöglichen. Dadurch können schlagartige Kompressionsvorgänge des Gases im Niederdruckbereich ermöglicht werden, die allein aufgrund der thermodynamischen Zustandsänderung zu einer erheblichen Temperaturerhöhung führen und im schlimmsten Fall zur Initiierung der Zerfallsreaktion führen können. Es wird erstmalig ein Versuchsaufbau im Industriemaßstab, der einer explosionsartigen Zerfallsreaktion von TFE standhalten kann. Zahlreiche Sicherheitskonzepte einschließlich diverser Berstscheibenkonfigurationen als auch zeitgesteuerte Schnellschlussventile wurden eingehend untersucht und bewertet, um die optimale Versuchskonfiguration für bestmögliche Reproduzierbarkeit festzulegen. Es fand eine systematische Untersuchung der schlagartigen Kompression der Systeme Luft/Luft, TFE/Luft, TFE/TFE und TFE/N2 statt. In der Hochdrucksektion wurden Drücke bis 30 bar realisiert und im Niederdrucksektor konnten Anfangsdrücke im Bereich weniger Millibar bis hin zu Atmosphärendruck eingestellt werden. Als Hauptergebnis wurde ein „Hazard diagram" erstellt, mit dessen Hilfe die Zündwahrscheinlichkeit in Abhängigkeit vom Hochdruck und Niederdruck abgeschätzt werden kann. Gefährliche Bedingungen in Rohrleitungen können dadurch auf einfachem Weg identifiziert werden. Als Referenzsystem zur Beurteilung der maximal erreichbaren nicht reaktiven Kompressionstemperaturen wurde Luft/Luft verwendet. Die damit ermittelten Daten dienten zur Bewertung von zusätzlichen exothermen Effekten, wie sie etwa bei Vorreaktion des TFE im Falle einer Dimerisierung auftreten können. Entgegen der ursprünglichen Annahme konnten die Systeme TFE/Stickstoff und TFE/TFE im verwendeten Aufbau nicht durch Kompressionsvorgänge gezündet werden. T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 05.11.2015 KW - Tetrafluoroethen KW - Zerfall KW - Selbstentzündung KW - Adiabate Kompression PY - 2015 SN - 978-3-86011-091-1 SP - 1 EP - 10 AN - OPUS4-34852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schumm, A. A1 - Martin, E. A1 - Beaumont, M. A1 - Ewert, Uwe A1 - Kolkoori, Sanjeevareddy A1 - Zscherpel, Uwe A1 - Wrobel, Norma A1 - Redmer, Bernhard T1 - A comparative study on the performance of digital detector systems for high energy applications JF - The e-journal of nondestructive testing & ultrasonics N2 - For cast components reaching or exceeding total material thicknesses of 150mm, high energy sources such as linear accelerators or Betatrons are required in order to obtain reasonable exposure times. In this study, the performance of digital detector systems, involving imaging plates (IP) and digital detector arrays (DDA), was evaluated with respect to the testing class B requirements as formulated in the standard EN ISO 17636-2. As a reference, traditional radiographic film and a Cobalt-60 source was used. With film exposures, testing class B was achieved with Co-60 and Betatron (7.5 MV) at longer exposure times. The preliminary results show that the testing class B was not obtained with the examined digital detector arrays (DDA) and the high resolution imaging plates (IP) , even at 40, 60 and 80 minutes exposure time with a 7.5 MV Betatron. Class A was achieved using high resolution imaging plates with optimized metal filters between object and IPs and a high resolution DDA with intermediate Cu filters. Class A was also achieved applying a DDA with lower basic spatial resolution than required by Table B.13 of EN ISO 17636-2, but using the compensation principle as described in this standard. The next generation of digital detector arrays might potentially be able to obtain class B performance with the expected spatial resolution and sensitivity improvements. T2 - ECNDT 2014 - 11th European conference on non-destructive testing CY - Prague, Czech Republic DA - 06.10.2014 KW - Radiography KW - Image quality KW - Betatron KW - Digital detector array (DDA) KW - Casting KW - Standards KW - High energy radiography KW - Comparison of detectors KW - Steel weldment PY - 2014 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-323075 UR - https://www.ndt.net/?id=16394 SN - 1435-4934 VL - 19 IS - 12 SP - 1 EP - 6 PB - NDT.net CY - Kirchwald AN - OPUS4-32307 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin-Sanchez, Pedro Maria A1 - Gorbushina, Anna A1 - Toepel, Jörg A1 - Kunte, Hans-Jörg T1 - A novel qPCR protocol to the specific detection and quantification of Hormoconis resinae in fuel systems T2 - XVI International Biodeterioration and Biodegradation Symposium; International Biodeterioration & Biodegradation Society N2 - A novel qPCR protocol to the specific detection and quantification of Hormoconis resinae in fuel systems P.M. Martin-Sanchez1 , J. Toepel1, H.J. Kunte1, A.A. Gorbushina1, 2 1BAM Federal Institute for Materials Research and Testing, Department 4 Materials & Environment, Berlin, Germany 2 Free University of Berlin, Department of Earth Sciences & Biology, Chemistry & Pharmacy, Berlin, Germany Introduction. Microbial contamination of fuels is a phenomenon widely reported in the literature causing dramatic problems in fuel systems such as blockage of pipelines and filters, and corrosion of their metal components. A variety of microorganisms, fungi, yeasts and bacteria, can contaminate the distillate fuels. Between them, the filamentous fungus Hormoconis resinae, previously described as Cladosporium resinae and also known as "kerosene fungus" or "diesel bug", has traditionally been considered the main responsible of such troubles due to its great capacity to produce biomass and biofilms. Aim. The overarching goal of this study was to develop a novel real-time quantitative PCR (qPCR) method to detect and quantify the fungus H. resinae in samples from fuel systems. Materials and methods. Four specific primer sets targeting on two molecular markers, RNA polymerase II second largest subunit (RPB2) and internal transcribed spacers of rDNA (ITS), were designed using Primer Blast. The specificity of primer sets was evaluated by both conventional PCR and qPCR, analyzing the DNA extracts from H. resinae strains and other fungi and yeasts previously described in fuels as well as four taxonomically closest related species. The efficiency and sensitivity of these protocols were assessed by constructing the corresponding standard curves for each primer sets. Results. Two primer sets, Hr556F/Hr814R (RPB2) and Hr101F/Hr408R (ITS), were selected according to their remarkable specificity. Their standard curves showed a good correlation coefficient and efficiency. Additionally, the selected primer pairs showed a high sensitivity detecting a tiny amount of H. resinae DNA, 10 pg for RPB2 primers and 0.1 pg for ITS primers. Conclusions. The established qPCR protocol is a reliable and useful tool to the specific detection and quantification of H. resinae. Its subsequent implementation to analyze samples of fuels or biofilms covering fuel systems will allow the early detection of fungal outbreaks in order to apply the appropriated control procedures. Moreover, these analyses will determine the current incidence of this species in the cases of biological fuel contamination. Keywords. Hormoconis resinae, real-time qPCR, diesel bug, kerosene fungus T2 - XVI International Biodeterioration and Biodegradation Symposium; International Biodeterioration & Biodegradation Society CY - Lodz, Poland DA - 2014-09-03 PY - 2014 AN - OPUS4-32165 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Curado, Jessica A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Scharf, O. T1 - Slicing - a new method for non destructive 3D elemental sensitive characterization of materials JF - Journal of analytical atomic spectrometry N2 - Recent advances in synchrotron sources and detector technology have led to substantial improvements in spatial resolution and detection limits for X-ray fluorescence analysis (XRF). However, the non-destructive three-dimensional elemental sensitive characterization of samples remains a challenge. We demonstrate the use of the so-called 'Color X-ray Camera' (CXC) for 3D measurements for the first time. The excitation of the sample is realized with a thin sheet-beam. The stepwise movement of the sample allows getting the elemental distribution for each layer with one measurement. These layers can be combined to a full 3D dataset for each element afterwards. Since the information is collected layer by layer, there is no need to apply reconstruction techniques, which quite often are the reason for artifacts in the results achieved by computed tomography (CT). The field of applications is wide, as the 3D elemental distribution of a material contains clues to processes inside the samples from a variety of origins. The technique is of special interest and well suited for biological specimens, because their light matrix minimizes restricting absorption effects. Measurement examples of a hornet and the teeth of a Sorex araneus are shown. KW - SR-microXRF KW - 3D KW - CXC PY - 2014 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-324330 DO - https://doi.org/10.1039/c4ja00085d SN - 0267-9477 SN - 1364-5544 VL - 29 IS - 8 SP - 1339 EP - 1344 PB - Royal Society of Chemistry CY - London AN - OPUS4-32433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krietsch, Arne A1 - Scheid, Marc A1 - Schmidt, Martin A1 - Krause, U. T1 - Explosion behaviour of metallic nano powders JF - Journal of loss prevention in the process industries N2 - This paper describes experiences and results of experiments with several metallic dusts within the nanometer range. The nano dusts (aluminium, iron, zinc, titanium and copper) were tested in a modified experimental setup for the test apparatus 20 L-sphere (also known as 20-L Siwek Chamber), that enables the test samples to be kept under inert atmospheric conditions nearly until ignition. This setup was already introduced in earlier papers by the authors. It was designed to allow the determination of safety characteristics of nano powders under most critical circumstances (e.g. minimisation of the influence of oxidation before the test itself). Furthermore the influence of passivation on explosion behaviour is investigated and additional tests with deposited dust were carried out to describe the burning behaviour of all dusts. For a better characterisation all samples were tested with a simultaneous thermal analysis (STA). To minimise the influence of oxidation all samples were handled at inert conditions until shortly before ignition or start of the test respectively. KW - Dust explosion KW - Nano powder KW - Ignition KW - Explosion protection PY - 2015 DO - https://doi.org/10.1016/j.jlp.2015.03.016 SN - 0950-4230 SN - 1873-3352 VL - 36 SP - 237 EP - 243 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-33026 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mielentz, Frank A1 - Feller, Viktor A1 - Krause, Martin A1 - Orglmeister, R. T1 - Ultraschallprüfung von Betonbauteilen - laufzeitgesteuerte Gruppenstrahler mit Punktkontaktprüfköpfen JF - Materials Testing N2 - In den letzten Jahren werden vermehrt trocken ankoppelbare Ultraschall-Punktkontaktprüfköpfe erfolgreich für Prüfaufgaben im Bauwesen angewendet. Oft werden mehrere Punktkontaktprüfköpfe in einem Gehäuse zu einer Strahlergruppe kombiniert, um die Schallbündelung zu verbessern oder um einzelne Prüfköpfe nacheinander als Sender und Empfänger zu betreiben und die Messsignale nach der Messung einer SAFT-Auswertung zuzuführen. Alternativ können die einzelnen Prüfköpfe einer solchen Gruppe laufzeitgesteuert angeregt und dadurch schon während der Messung das Prüfkopfschallfeld beeinflusst werden. Für diese Technik sind die Bezeichnungen laufzeitgesteuerte Ultraschall-Gruppenstrahler oder 'Phased Array' gebräuchlich. Mit den präsentierten Untersuchungen sollen die Anwendungsmöglichkeiten der Gruppenstrahlertechnik im Niederfrequenzbereich durch den Einsatz von Punktkontaktprüfköpfen verbessert werden. Dazu werden verschiedene Wellenarten eingesetzt und der Einfluss der Anordnung der Strahlerelemente im Array untersucht. KW - Ultra sonic testing KW - Concrete KW - Phased array KW - Point contact probes KW - Beton KW - Ultraschallprüfung KW - Laufzeitgesteuerte Gruppenstrahler KW - Punktkontaktprüfköpfe PY - 2015 UR - http://www.hanser-elibrary.com/doi/pdf/10.3139/120.110723 SN - 0025-5300 VL - 57 IS - 4 SP - 329 EP - 336 PB - Hanser CY - München AN - OPUS4-33064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Menzel, M. A1 - Flittschen, U. E. A. A1 - Scharf, O. A1 - Nowak, S. A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Montoya, V. A1 - McIntosh, K. A1 - Havrilla, G. J. A1 - Hischenhuber, P. A1 - Streli, C. T1 - Shading Effects in SR-TXRF: Calcullations and Experimental Visualization using a Color X-ray Camera T2 - Denver X-ray Conference T2 - Denver X-ray Conference CY - BIG SKY RESORT, BIG SKY, MONTANA, USA DA - 2014-07-28 PY - 2014 AN - OPUS4-32386 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Müller, Thoralf A1 - Burkert, Andreas T1 - Optimierung industrieller Korundschleifprozesse zur Sicherstellung der Korrosionsbeständigkeit nichtrostender Stähle T2 - Arbeitskreissitzung des GfKORR e.V., Arbeitskreis "Korrosion und Korrosionsschutz von Eisen und Stahl" T2 - Arbeitskreissitzung des GfKORR e.V., Arbeitskreis "Korrosion und Korrosionsschutz von Eisen und Stahl" CY - Dortmund, Germany DA - 2014-12-11 PY - 2014 AN - OPUS4-32228 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Stalinski, T. A1 - Püschel, F. A1 - Scharf, O. A1 - Arkadiev, V. A1 - Wedell, R. T1 - Adaptive Kanalreduktion eines hyperspektralen Bilddatensatzes kombiniert mit k-mean Clustering T2 - Workshop Farbbildverarbeitung - Wuppertal 2014 T2 - Workshop Farbbildverarbeitung - Wuppertal 2014 CY - Wuppertal DA - 2014-09-25 PY - 2014 AN - OPUS4-32365 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - 3D and Beyond - Basics and Applications of the Color X-ray Camera T2 - Denver X-ray Conference T2 - Denver X-ray Conference CY - BIG SKY RESORT, BIG SKY, MONTana, USA DA - 2014-07-28 PY - 2014 AN - OPUS4-32366 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Röntgenfluoreszenzanalyse mit Synchrotronstrahlung an der Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin T2 - Seminar "Strahlenphysikalische Anwendungen in Technik und Medizin" T2 - Seminar "Strahlenphysikalische Anwendungen in Technik und Medizin" CY - Wien (Österreich) DA - 2014-01-14 PY - 2014 AN - OPUS4-32367 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Curado, Jessica T1 - Slicing - A New Method For Non Destructive 3D Elemental Sensitive Characterization Of Materials T2 - Digital Speciman 2014 T2 - Digital Speciman 2014 CY - Berlin DA - 2014-09-08 PY - 2014 AN - OPUS4-32368 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Scharf, O. T1 - Detection of platinum in gold with D2XRF T2 - SR2A 2014 T2 - SR2A 2014 CY - Paris (Frankreich) DA - 2014-09-09 PY - 2014 AN - OPUS4-32369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Günter A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Scharf, O. T1 - Double Dispersive X-ray Fluorescence T2 - EXRS 2014 T2 - EXRS 2014 CY - Bologna (Italien) DA - 2014-06-15 PY - 2014 AN - OPUS4-32370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Fittschen, U. E. A. A1 - Menzel, M. A1 - Scharf, O. A1 - Nowak, S. A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Montoya, V. A1 - McIntosh, K. T1 - Shading Effects in SR-TXRF: Calculations and Experimental Visualization using a Color X-ray Camera T2 - Denver X-ray Conference T2 - Denver X-ray Conference CY - BIG SKY RESORT, BIG SKY, MONTANA, USA DA - 2014-07-28 PY - 2014 AN - OPUS4-32371 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schulze, S. A1 - Krause, Martin A1 - Mayer, K. A1 - Redmer, Bernhard A1 - Wiggenhauser, Herbert T1 - Grouting defects localized by ultrasonic testing including phase evaluation T2 - SMT 2014 - NDE/NDT for highways and bridges - Structural materials technology N2 - Grouting defects, e.g. in post-tensioned structures or piped anchors may be identified by ultrasonic imaging. Since several years experiences are carried out with false color displayed phase values, which enable distinct localization of ungrouted regions. In this contribution we report on progress in localizing grouting defects in tendon ducts, when they are only partly grouted and the unfilled part is not orientated into the direction of the measuring surface. This is frequently the case e.g. for box girder structures. Düring the project specimens containing different types of grouting faults are investigated in Order to optimize measuring and evaluation techniques. A handheld linear array System (commercially available) is applied for fast 2D-measurement and subsequent phase sensitive 3D-imaging (new Software development). In a large concrete wall specimen tendon ducts and real prestressing Systems containing grouting defects were built in. The ducts are partly covered by non prestressed reinforcement bars in order to investigate its disturbing influence. These included objects were investigated afterwards with the described methods. We report on large area measuring results, which were partly verified by y-radiography. In the frame of practical application results of measuring the position and extend of a blockade within a posttensioned structure are presen ted. T2 - SMT 2014 - NDE/NDT for highways and bridges - Structural materials technology CY - Washington, DC, USA DA - 25.08.2014 KW - Ultraschallecho-Verfahren KW - Spannbeton KW - Phasenauswertung PY - 2014 SN - 978-1-57117-342-3 SP - 321 EP - 328 AN - OPUS4-32846 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Krause, Martin A1 - Mayer, K. A1 - Ballier, G. A1 - Borchardt, Kerstin A1 - Chinta, P.K. A1 - Effner, Ute A1 - Milmann, Boris A1 - Müller, Sabine A1 - Nowak, Thomas Rudolf T1 - Hochgenaue Strukturerkennung von Holzbauteilen mit 3D-Ultraschall T2 - Bauforschung für die Praxis N2 - Inhalt ist die zerstörungsfreie Detailuntersuchung von Holzbauteilen mit einem dreidimensional abbildenden Ultraschall-Echoverfahren. Das neu entwickelte 3D-Verfahren berücksichtigt den anisotropen Aufbau des Holzes. Die Bildschnitte und Projektionen werden aus flächigen Ultraschallaufnahmen berechnet. Die Messungen erfolgen an Probekörpern sowie an Bauteilen aus der Praxis. In dem Forschungsvorhaben wird die für Holz neue 3D-Rekonstruktionsrechnung verwendet und mit dem Ziel weiterentwickelt, unter Berücksichtigung der anisotropen Struktur des Holzes eine dreidimensional aufgelöste Abbildung von Reflektoren im Inneren der Holzbauteile zu ermöglichen. Damit werden die bisher für Holzbauteile zur Verfügung stehenden Verfahren entscheidend ergänzt, weil nun eine hochgenaue dreidimensionale Abbildung erreichbar ist (Auflösung: 20 mm und besser). KW - Ultraschallecho-Verfahren KW - Holzbauteile KW - Abbildungsverfahren KW - Imaging PY - 2014 UR - https://www.irb.fraunhofer.de/bauforschung/baufolit/projekt/Hochgenaue-Strukturerkennung-von-Holzbauteilen-mit-3D-Ultraschall/20138035979 SN - 978-3-8167-9212-3 VL - 109 SP - 1 EP - 101 PB - Fraunhofer IRB Verl. CY - Stuttgart AN - OPUS4-32852 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballier, G. A1 - Mayer, K. A1 - Krause, Martin T1 - Ultraschallabbildung zur zerstörungsfreien Strukturbestimmung von Betonbauteilen mit Hilfe der "One-Way"-Wellengleichung T2 - DGZfP-Jahrestagung 2011 N2 - Die ZfP versucht mit Hilfe von Messdaten, die sie aus z. B. einer Impuls-Echo-Messung gewinnt, Rückschlüsse auf die innere Struktur eines Objektes zu ziehen. Bei Betonbauteilen sollen im Besonderen Verpressfehler, die dann zur Korrosion und damit zur einer Beeinträchtigung der Standsicherheit und Dauerhaftigkeit des Konstruktion (z. B. einer Spannbetonbrücke) führen können, schnell und mit einer hohen Sicherheit aus den Messdaten lokalisiert werden. Das konventionellen SAFT oder FT-SAFT-Verfahren liefern in Verbindung mit einer Phasenauswertung einen schnellen und sicheren Hinweis darauf, dass ein Lufteinschluss/Defekt vorliegt. Darüber hinaus können jedoch Rückausbreitungs-Verfahren, wenn ein gutes Geschwindigkeitsprofil vorliegt, eine wesentlich bessere Lokalisierung des Defekts bieten als SAFT-Verfahren, jedoch mit dem Nachteil, dass sie sehr zeit- und rechenintensiv sind, vor allem im Dreidimensionalen. Als Mittelweg kann hierzu die "One-Way"-Methode dienen. Diese Methode verwendet Pseudo-Differential-Operatoren und ist sehr robust auch bei relativ groben Geschwindigkeitsprofilen. Sie wird an Beispielen aus der Bauwerkdiagnose mit den konventionellen Verfahren verglichen. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Ultraschallecho-Verfahren KW - Betonbauteile KW - Modellierung PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-328714 SN - 978-3-940283-33-7 SP - Poster 66, 1 EP - 8 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-32871 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nehrig, Marko A1 - Wille, Frank A1 - Feldkamp, Martin A1 - Rolle, Annette T1 - Aspects of gas generation caused by residual water inside ILW packages T2 - RAMTRANS 2015 - 10th International conference on radioactive materials transport and storage (Proceedings) N2 - Packages for intermediate level waste (ILW) often contain residual water besides the actual waste. The water either exists as obvious free water or it may be bound physically or chemically, e.g. as pore water. Water driven gas generation could occur by vaporisation and by radiolysis. Steam as the result of vaporisation causes an increasing pressure inside a package and can affect corrosion. Vaporisation and condensation processes itself change the thermal behaviour of the content especially during strongly unsteady thermal situations like accident fire situations. Radiolysis changes the chemical composition of the content which could cause an unexpected interaction, e.g. hydrogen embrittlement. Besides the pressure build-up the radiolysis of water generates hydrogen and oxygen, which can be highly flammable respectively explosive. The gas generation caused by vaporisation and radiolysis must be taken into account during the design and the safety assessment of a package. Pressure build-up, a changed thermal behaviour and content chemistry, and especially the risk of accumulation of combustible gases exceeding the limiting concentration for inflammability has to be considered in the safety assessment. Approaches to ensure the transportability of stored packages due to radiolysis will be discussed. T2 - RAMTRANS 2015 - 10th International conference on radioactive materials transport and storage CY - Oxford, UK DA - 19.05.2015 KW - Typ-B KW - ILW package KW - Gas generation KW - Radiolysis KW - Wet content PY - 2015 SP - 1 EP - 7 AN - OPUS4-33429 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Seewald, J.S. A1 - Reeves, E.P. A1 - Bach, W. A1 - Saccocia, P.J. A1 - Craddock, P.R. A1 - Shanks III, W.C. A1 - Sylva, S.P. A1 - Pichler, T. A1 - Rosner, Martin A1 - Walsh, E. T1 - Submarine venting of magmatic volatiles in the Eastern Manus Basin, Papua New Guinea JF - Geochimica et cosmochimica acta N2 - The SuSu Knolls and DESMOS hydrothermal fields are located in the back-arc extensional transform zone of the Eastern Manus Basin. In 2006, highly acidic and ΣSO4-rich vent fluids were collected at both sites and analyzed for the chemical and isotopic composition of major and trace species. Fluids exiting the seafloor have measured temperatures from 48 to 215 °C and are milky white in appearance due to precipitation of elemental S0. Vent fluid concentrations of Na, K, and Mg are depleted by as much as 30% relative to seawater, but have the same relative abundance. In contrast, the fluids are highly enriched in dissolved ΣCO2, Cl, SiO2(aq), Fe, and Al relative to seawater. Measured pH (25 °C) ranged from 0.95 to 1.87 and aqueous ΣSO4 ranged from 35 to 135 mmol/kg. The chemical and isotopic composition points to formation via subsurface mixing of seawater with a Na-, K-, Mg-, and Ca-free, volatile-rich magmatic fluid exsolved from subsurface magma bodies during a process analogous to subaerial fumarole discharge. Estimates of the magmatic end-member composition indicate a fluid phase where H2O > SO2 > CO2 ≈ Cl > F. The hydrogen and oxygen isotopic composition of H2O and carbon isotopic composition of ΣCO2 in the vent fluids strongly suggest a contribution of slab-derived H2O and CO2 to melts generated in the mantle beneath the Eastern Manus volcanic zone. Abundant magmatically-derived SO2 undergoes disproportionation during cooling in upflow zones and contributes abundant acidity, SO42-, and S0 to the venting fluids. Interaction of these highly acidic fluids with highly altered mineral assemblages in the upflow zone are responsible for extensive aqueous mobilization of SiO2(aq), Fe, and Al. Temporal variability in the speciation and abundance of aqueous S species between 1995 and 2006 at the DESMOS vent field suggests an increase in the relative abundance of SO2 in the magmatic end-member that has mixed with seawater in the subsurface. Results of this study constrain processes responsible for the formation of hot-spring fluids in magmatically active back-arc environments and the resulting chemical exchange between the lithosphere and water column. PY - 2015 DO - https://doi.org/10.1016/j.gca.2015.04.023 SN - 0016-7037 SN - 1872-9533 VL - 163 SP - 178 EP - 199 PB - Elsevier Science CY - New York, NY AN - OPUS4-33433 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Nehrig, Marko A1 - Bletzer, Claus Wilhelm A1 - Musolff, André A1 - Wille, Frank T1 - Combustion of wood encapsulated in steel sheets during fire test T2 - RAMTRANS 2015 - 10th International conference on radioactive materials transport and storage (Proceedings) N2 - Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood, encapsulated by Steel sheets. These impact limiters shall ensure the transport cask meets the IAEA safety requirements. After damage caused by the mechanical tests the package has to withstand a severe fire scenario. According to the regulations during and following the fire test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally. Due to results of the French institute IRSN it was shown that after the fire test an additional energy supply from a pre-damaged impact limiter should be taken into account. The combustion or smouldering of wood was of interest. BAM started a first test phase to examine the issue of combustion for such kind of package components. The goal was to understand the phenomena under the consideration of relevant regulatory boundary conditions. Several metal buckets were filled with wood and equipped with thermocouples. The test specimens have been prepared with different damage arrangements to take the influence of the mechanical tests into account. This paper shows the experimental Setup and the conduction of the tests. The first test shows that pre-damaged metal encapsulations can lead to smouldering of the wood and with this to a Supplement energy release after the end of the 30 minute fire. The consequence could be, to consider additional thermal loads of wood filled impact limiters to filled the IAEA regulations, if the conditions of the tests are transferable to the safety analysis of the package design. T2 - RAMTRANS 2015 - 10th International conference on radioactive materials transport and storage CY - Oxford, UK DA - 19.05.2015 KW - Typ-B KW - Impact limiter KW - Shock absorber KW - Wood KW - Thermal test KW - Fire test PY - 2015 SP - 1 EP - 9 AN - OPUS4-33407 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard T1 - Experience feedback from BAM safety assessment of transport packages T2 - 10th Int. Conference on Transport and Storage of Radioactive Materials T2 - 10th Int. Conference on Transport and Storage of Radioactive Materials CY - Oxford, GB DA - 2015-05-19 PY - 2015 AN - OPUS4-33447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Nehrig, Marko A1 - Bletzer, Claus W. A1 - Musolff, André A1 - Wille, Frank T1 - Combustion of wood encapsulated in steel sheets during fire test T2 - Ramtrans 2015, 10th International Conference on Radioactive Materials Transport and Storage T2 - Ramtrans 2015, 10th International Conference on Radioactive Materials Transport and Storage CY - Oxford, UK DA - 2015-05-19 PY - 2015 AN - OPUS4-33449 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Droste, Bernhard T1 - Experience feedback from BAM safety assessment of transport packages T2 - RAMTRANS 2015 - 10th International conference on radioactive materials transport and storage (Proceedings) N2 - BAM as competent authority regarding assessment of mechanical and thermal design, activity release and quality assurance measures of Type-B(U) transport packages developed a thesaurus of experience feedback topics from recent assessment procedures. The list is structured according to the European PDSR guide. It involves issues, which from BAM's point of view, needed clarification during the last package design assessment procedures. The list contains issues from Operation (e.g. deactivation of handling lugs not intended for package handling), maintenance (e.g. leak tightness of impact limiting devices) to technical assessment (e.g. formation of hydrogen by radiolysis and its impact on pressure and ignitability, consideration of ageing mechanisms, thermo-mechanical assessment, impact of gaps between content and flask) as well as to general and specific safety analysis report requirements (e.g. report structure and required data). T2 - RAMTRANS 2015 - 10th International conference on radioactive materials transport and storage CY - Oxford, UK DA - 19.05.2015 KW - Transport KW - RAM KW - Radioactive material KW - Cask KW - Flask KW - Nuclear fuel PY - 2015 SP - 1 EP - 7 AN - OPUS4-33420 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Einfluss der Oberflächenausführung auf das Korrosionsverhalten nichtrostender Stähle T2 - Arbeitskreissitzung des GfKORR e.V., Arbeitskreis "Korrosion und Korrosionsschutz von Eisen uned Stahl" T2 - Arbeitskreissitzung des GfKORR e.V., Arbeitskreis "Korrosion und Korrosionsschutz von Eisen uned Stahl" CY - Duisburg, Germany DA - 2015-06-10 PY - 2015 AN - OPUS4-33424 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter A1 - Kunath, K. A1 - Uhlig, S. T1 - Ziel, methodisches Konzept und Ergebnisse des Interlaboratory test 2010/11 "DIN EN 15188:2007 - self ignition temperature" T2 - Kolloquium des Arbeitskreises "Brennbare Stäube": Interlaboratory test 2010/11 DIN EN 15188:2007 - self-ignition temperature" T2 - Kolloquium des Arbeitskreises "Brennbare Stäube": Interlaboratory test 2010/11 DIN EN 15188:2007 - self-ignition temperature" CY - Dresden, Deutschland DA - 2013-01-29 PY - 2013 UR - http://www.ceqat-dghs.bam.de/en/events/index.htm AN - OPUS4-33474 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Imaging with the Color X-ray Camera - Basics and Examples T2 - HZB Industry Workshop T2 - HZB Industry Workshop CY - Berlin DA - 2015-02-19 PY - 2015 AN - OPUS4-34023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Reinemann, Steffi T1 - Electrochemical investigations regarding the influence of deformation-induced martensite on the corrosion behaviour of austenitic stainless steels T2 - Eurocorr 2015 T2 - Eurocorr 2015 CY - Graz, Austria DA - 2015-09-06 PY - 2015 AN - OPUS4-34068 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - The KorroPad - A novel test method for assessing the pitting corrosion susceptibility of stainless steel surfaces T2 - Eurocorr 2015 T2 - Eurocorr 2015 CY - Graz, Austria DA - 2015-09-06 PY - 2015 AN - OPUS4-34069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hattwig, Martin T1 - Druckentlastung von Gasexplosionen bei erhöhtem Anfangsdruck T2 - Berichte - 3. Kolloquium über Fragen der Chemischen Sicherheitstechnik T2 - 3. Kolloquium über Fragen der Chemischen Sicherheitstechnik CY - Berlin DA - 1985-05-08 PY - 1985 SP - 51 EP - 57 PB - Bundesanstalt für Materialprüfung CY - Berlin AN - OPUS4-34088 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - The KorroPad - A novel test method for assessing the pitting corrosion susceptibility of stainless steel surfaces T2 - EUROCORR 2015 - European corrosion congress (Proceedings) N2 - Pitting corrosion is one of the most common mechanisms of local passivity breakdown on stainless steels. Electrochemical methods have preferentially been applied for the evaluation of pitting corrosion resistance of stainless steels in laboratory. Nevertheless, some of them are not reliable enough and in general the application of electrochemical methods in the field becomes difficult because of a required deep understanding of corrosion phenomena and measurement technology. A new approach for the evaluation of the pitting corrosion susceptibility of stainless Steel surfaces in the laboratory as well as in the field is frequently demanded by representatives of the metalworking industry. Therefore, the KorroPad-test was invented and patented as part of a research project at the BAM Federal Institute for Materials Research and Testing in Germany. T2 - EUROCORR 2015 - European corrosion congress CY - Graz, Austria DA - 06.09.2015 KW - KorroPad KW - Pitting corrosion KW - Stainless steel PY - 2015 SP - Paper 5_730, 1 AN - OPUS4-34297 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Klippel, Alexander A1 - Koperski, January A1 - Zirker, Stefan A1 - Przybilski, Alexander A1 - Wappler, Mike T1 - Der Einfluss des Staubungsverhaltens auf druckentlastete Staubexplosionen T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen DA - 2015-11-05 PY - 2015 AN - OPUS4-34789 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin, Tina A1 - Nordsiek, S. A1 - Weller, Andreas T1 - Low-frequency impedance spectroscopy of wood JF - Journal of research in spectroscopy N2 - The method of low-frequency impedance spectroscopy has been successfully applied in Earth sciences to characterize soils and rocks. The method uses the diagnosing power of complex electrical resistivity in a frequency range between 1 mHz and 1 kHz. In our study, the potential of this method has been explored for the investigation of wood. We observed remarkable differences in the resulting spectra of complex resistivity for different European and Tropical tree species. The data processing of the acquired low-frequency impedance spectra yields integrating parameters. The comparison of the integrating parameters with the mean pore diameter that has been separately determined for the tropical tree species indicates clear correlations. An additional investigation has revealed remarkable difference in the complex resistivity spectra between oil bearing and non-oil bearing sandal wood. This result and the relations between electrical parameters and structural parameters of wood indicate the prospective potential of low-frequency impedance spectroscopy. KW - Holz KW - Spektroskopie KW - ZfP KW - SIP KW - Nondestructive KW - Low-frequency impedance spectroscopy KW - Spectral induced polarization PY - 2015 DO - https://doi.org/10.5171/2015.910447 SP - 1 EP - 9 PB - IBIMA Publ. AN - OPUS4-34811 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogel, Christian A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Schäfers, F. A1 - Adam, Christian T1 - Chemical state of chromium, sulfur, and iron in sewage sludge ash based phosphorus fertilizers JF - ACS sustainable chemistry & engineering N2 - As an essential element of all life forms, phosphorus (P) is vital to the fertilizer industry. With decreasing quantity and quality of phosphate rock resources, recycling P-fertilizers from wastewater is of increasing interest. The P-fertilizer products of a recently developed thermochemical process for P recovery from sewage sludge ash (SSA) were investigated by chromium, sulfur, and iron K-edge X-ray near-edge structure (XANES) spectroscopy. This paper focuses the formation and prevention of toxic chromium(VI) and toxic sulfides during the thermochemical processes. Reducing conditions prevent the oxidation of chromium(III) in the SSA to toxic chromium(VI). Sulfides formed under the reducing conditions are nontoxic iron sulfides. Hematite (Fe2O3) present in the SSA is reduced to magnetite (Fe3O4). A gentle post-treatment at 400 °C under oxidizing conditions converts the iron sulfides into plant-available iron sulfates. This oxidative post-treatment does not form undesired chromium(VI) compounds. KW - X-ray absorption near-edge structure (XANES) spectroscopy KW - Phosphorus recovery KW - Sewage sludge ash KW - Chromium KW - Sulfur KW - Iron PY - 2015 DO - https://doi.org/10.1021/acssuschemeng.5b00678 SN - 2168-0485 VL - 3 IS - 10 SP - 2376 EP - 2380 PB - ACS Publ. CY - Washington, DC AN - OPUS4-34166 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Deppe, Hans-Joachim A1 - Gersonde, Martin T1 - Zur Beständigkeit imprägnierter Brettschichtholzverleimung JF - Holz als Roh- und Werkstoff PY - 1985 SN - 0018-3768 VL - 43 IS - 1 SP - 33 EP - 37 PB - Springer CY - Berlin AN - OPUS4-34119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Reinemann, S. T1 - Electrochemical investigations regarding the influence of deformation-induced martensite on the corrosion behaviour of austenitic stainless steels T2 - EUROCORR 2015 - European corrosion congress (Proceedings) N2 - Contents of deformation-induced martensite in the lattice structure of austenitic stainless steels lead to an either beneficial or detrimental change of mechanical and magnetic properties depending on the prospective application. Whereas these changes are well-known and investigated widely the influence of deformation-induced martensite on the corrosion behaviour is frequently an issue of scientific discussions. There are opposing opinions that depend on the type of corrosion mechanism being investigated for example regarding pitting corrosion resistance in Chloride containing media. In it is stated that pitting resistance is not influenced by deformationinduced martensite while in it is discussed that more pitting occurs on martensitic structure. The same conflictive opinions appear regarding active dissolution in acidic media or intergranular corrosion. In addition, when having deeper insight into literature it can be concluded that even the type of test method, i. e. dynamic or static testing, has a big influence on the obtained results concerning the influence of martensite in austenitic stainless steels. T2 - EUROCORR 2015 - European corrosion congress CY - Graz, Austria DA - 06.09.2015 KW - Deformation-induced martensite KW - Stainless steel KW - Electrochemical investigations PY - 2015 SP - paper 5_776 AN - OPUS4-34617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf A1 - Burkert, Andreas A1 - Heyn, A. A1 - Balzer, Martin A1 - Fenker, M. T1 - Investigation on the improved corrosion behavior of TiMgN hard coating on steel substrate T2 - EUROCORR 2015 - European corrosion congress (Proceedings) T2 - EUROCORR 2015 - European corrosion congress CY - Graz, Austria DA - 06.09.2015 KW - Hard coatings KW - TiMgN KW - Corrosion PY - 2015 SP - paper 11.1_693 AN - OPUS4-34618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krause, Martin A1 - Mauke, R. A1 - Effner, Ute A1 - Milmann, Boris A1 - Völker, Christoph A1 - Wiggenhauser, Herbert T1 - Ultrasonic testing of a sealing construction made of salt concrete in an underground disposal facility for radioactive waste JF - The e-journal of nondestructive testing & ultrasonics N2 - For the closure of radioactive waste disposal facilities engineered barriers- so called “drift seals” are used. The purpose of these barriers is to constrain the possible infiltration of brine and to prevent the migration of radionuclides into the biosphere. In a rock salt mine a large scale in-situ experiment of a sealing construction made of salt concrete was set up to prove the technical feasibility and operability of such barriers. In order to investigate the integrity of this structure, non-destructive ultrasonic measurements were carried out. Therefore two different methods were applied at the front side of the test-barrier: 1 Reflection measurements from boreholes 2 Ultrasonic imaging by means of scanning ultrasonic echo methods This extended abstract is a short version of an article to be published in a special edition of ASCE Journal that will briefly describe the sealing construction, the application of the non-destructive ultrasonic measurement methods and their adaptation to the onsite conditions -as well as parts of the obtained results. From this a concept for the systematic investigation of possible contribution of ultrasonic methods for quality assurance of sealing structures may be deduced. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 2015-09-15 KW - Ultrasonic reflection measurement KW - Dry contact transducers in boreholes KW - Interface salt-concrete / rock salt KW - Ultrasonic imaging of internal reflectors PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-346203 UR - http://www.ndt.net/?id=18304 SN - 1435-4934 VL - 20 IS - 11 SP - 1 EP - 4 PB - NDT.net CY - Kirchwald AN - OPUS4-34620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fiedler Bremer, C. A1 - Scholz, R. A1 - Myslicki, S. A1 - Starke, P. A1 - Boller, C. A1 - Walther, F. A1 - Krause, Martin T1 - NDT-based characteriazation of timber and vulcanized fiber for civil infrastructure JF - The e-journal of nondestructive testing & ultrasonics N2 - The paper addresses beech wood as well as vulcanized fiber and discusses the results obtained when using acoustic emission and thermography as non-destructive testing techniques along tensile and load increase fatigue tests to characterize the wooden material’s behavior under increasing fatigue loads to get enhanced information regarding the fatigue behavior of both materials. Reference is mainly made to the materials’ anisotropic and microstructural behavior and what implications this has with respect to the materials’ strength. The influence of moisture is discussed, as well as parameters that may deserve monitoring in the sense of structural health monitoring to be applied in timber structures in general. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 15.09.2015 KW - Ermüdung KW - Belastungsversuch KW - Thermographie KW - ZfP KW - Timber PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-346377 UR - https://www.ndt.net/?id=18419 SN - 1435-4934 VL - 20 IS - 11 SP - 1 EP - 11 PB - NDT.net CY - Kirchwald AN - OPUS4-34637 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mayer, K. A1 - Krause, Martin A1 - Wiggenhauser, Herbert A1 - Milmann, Boris T1 - Investigations for the improvement of SAFT imaging quality of a large aperture ultrasonic system T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering (Proceedings) N2 - In parallel to the hardware development of an ultrasonic system for the investigation of thick concrete structures, a software package for interactive reconstruction of data for that special arrangement of ultrasonic transducers was developed. The system which is presented in a further contribution to this conference as "large aperture ultrasonic system" (LAUS) requires special features to the evaluation software because measuring positions can be in a non equidistant grid and there is the possibility to improve the measurement by adding measuring points interactively. Starting from theoretical considerations to the image generation by measuring arrangements of synthetic aperture problems, solution approaches for imaging with SAFT (Synthetic Aperture Focusing Technique) algorithms in space and frequency domain of data from insufficient grid density are presented. A wide range of issues that may arise in the application is precalculated by simulations and experimental studies, so that unavoidable artifacts can be identified and classified. A special focus is put on the application of thick concrete structures considering missing measuring points in a grid, grating lobes and surface waves. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 15.09.2015 KW - Ultraschallecho-Verfahren KW - Betonbauteile KW - Grating lobe reduction KW - Linear array KW - Synthetic aperture focusing technique (SAFT), KW - Ultrasound imaging PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-346421 SN - 1435-4934 SP - 1026 EP - 1034 PB - Technische Universität Berlin / Bundesanstalt für Materialforschung und -prüfung AN - OPUS4-34642 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mayer, K. A1 - Chinta, P.K. A1 - Langenberg, K.-J. A1 - Krause, Martin T1 - Ultrasonic imaging of defects in known anisotropic and inmomogeneous structures with fast synthetic aperture methodes T2 - 18th WCNDT - World conference on nondestructive testing (Proceedings) T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 2012-04-16 KW - SAFT KW - Pulse echo technique KW - Back propagation KW - Inverse scattering KW - Imaging PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 20 AN - OPUS4-35101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Ballier, G. A1 - Mayer, K. A1 - Langenberg, K.-J. A1 - Schulze, Sebastian A1 - Krause, Martin T1 - Improvement on tendon duct examination by modelling and imaging with synthetic aperture and one-way inverse methods T2 - 18th WCNDT - World conference on nondestructive testing (Proceedings) T2 - 18th WCNDT - World conference on nondestructive testing CY - Durban, South Africa DA - 2012-04-16 KW - SAFT KW - Ultrasonic NDT KW - Concrete KW - One way KW - AFIT KW - Time reversal PY - 2012 SN - 978-0-620-52872-6 SP - 1 EP - 8 AN - OPUS4-35102 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Feldmann, Rüdiger A1 - Zoёga, Andreas A1 - Milmann, Boris A1 - Krause, Martin T1 - Ortung tiefliegender Bewehrung durch Ultraschall mit bildgebender Phasenauswertung JF - The e-journal of nondestructive testing & ultrasonics N2 - Die Ortung von schlaffer Bewehrung in Beton erfolgt routinemäßig mit bildgebenden Radar- oder Wirbelstromverfahren. Die Anwendung dieser Verfahren ist aber begrenzt, wenn es sich um die Ortung tiefliegender Bewehrung (ab ca. 30 cm) oder um jungen Beton handelt. Grund ist die Schwächung der Radarpulse durch oberflächennahe Bewehrung oder durch die Betonfeuchte. Das bildgebende Ultraschallechoverfahren bietet den Vorteil, dass die Ultraschallpulse in diesen Fällen eine wesentlich höhere Eindringtiefe erreichen. Im vorliegenden Beitrag wird eine Fallstudie vorgestellt, bei der mehrlagig eingebrachte Bewehrungseisen in einer nur einseitig zugänglichen 60 cm dicken Betonplatte geortet werden sollten, um eine Kernbohrung ohne Verkanten der Bohrkrone durchzuführen. Zur Ortung der Bewehrung wurde das Ultraschallechoverfahren mitScherwellen der Mittenfrequenz 50 kHz mit einem automatisch arbeitenden Bauwerksscanner eingesetzt. Aus den flächig aufgenommenen Messdaten wurde mit der Rekonstruktionsrechnung nach dem Prinzip der synthetischen Apertur (SAFT, Synthetic Aperture Focusing Technique) die Position der Bewehrungseisen bildhaft ortsgenau dargestellt. Dies gelingt mit einer Auswertungsoption, bei der die Phase der reflektierten Ultraschallpulse ermittelt und farbcodiert dargestellt wird (Phasenauswertung). Damit lassen sich Reflexionen der Bewehrung eindeutig von eventuellen Fehlstellen oder Rückwandechos unterscheiden. T2 - Fachtagung Bauwerksdiagnose 2014 CY - Berlin, Germany DA - 13.02.2014 KW - Ultraschallecho-Verfahren KW - SAFT KW - Bewehrung KW - Beton KW - Abbildungsverfahren PY - 2014 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-351056 UR - https://www.ndt.net/?id=15885 SN - 1435-4934 VL - 19 IS - 8 SP - 1 EP - 11 PB - NDT.net CY - Kirchwald AN - OPUS4-35105 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feller, Viktor A1 - Mielentz, Frank A1 - Klewe, T. A1 - Krause, Martin A1 - Orglmeister, R. A1 - Pflugradt, M. T1 - Ultrasonic phased array for investigations of concrete components T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering (Proceedings) N2 - This paper describes an innovation of a phased array using dry contact probes to test concrete components. Based on preceding work on pressure waves, a low-frequency ultrasonic phased array consisting of shear wave probes is used in the experiments. This configuration allows the variation and control of the sound field directivity during the measurement. The measurements are carried out on a concrete test block using a scanning laservibrometer and a scanner system in transmission mode. The laboratory measurements are compared to theoretical calculations to investigate the influence of the probes shape and dimension on the resulting sound field patterns. The comparison of the modelling and the measurements demonstrates the suitability of the point source synthesis as a tool for the optimization of probe array designs. Methods of coded are used to improve the signal to noise ratio. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 15.09.2015 KW - Ultrasonic KW - Phased array KW - Concrete KW - Point source synthesis PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-350417 UR - http://www.ndt.net/article/ndtce2015/papers/059_feller_viktor.pdf SN - 1435-4934 SP - 1 EP - 5 PB - Technische Universität Berlin / Bundesanstalt für Materialforschung und -prüfung AN - OPUS4-35041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Reinemann, Steffi T1 - Elektrochemische Untersuchungen zum Einfluss von Verformungsmartensit auf das Korrosionsverhalten austenitisch nichtrostender Stähle T2 - AK-Sitzung der GfKORR AK "Korrosion und Korrosionsschutz von Eisen und Stahl" T2 - AK-Sitzung der GfKORR AK "Korrosion und Korrosionsschutz von Eisen und Stahl" CY - Duisburg DA - 2015-12-08 PY - 2015 AN - OPUS4-35046 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nowak, S.H. A1 - Bjeoumikhov, A. A1 - Von Borany, J. A1 - Buchriegler, J. A1 - Munnik, F. A1 - Petric, M. A1 - Renno, A.D. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Scharf, O. A1 - Strüder, L. A1 - Wedell, R. A1 - Ziegenrücker, R. T1 - Examples of XRF and PIXE imaging with few microns resolution using SLcam® a color X-ray camera JF - X-ray spectrometry N2 - We present results of recent development of the color X-ray camera, type SLcam®, allowing detection of X-ray images with few microns resolution. Such spectral resolution is achieved with the use of high-quality polycapillary optics combined with sub-pixel resolution. Imaging of Siemens star resolution test chart reveals that the resolution limit of SLcam® can go down to nearly 5µm. Several real sample examples of measurements carried out at the laboratory, synchrotron, and particle-induced X-ray emission beamlines are shown. This is the first time SLcam® is used as particle-induced X-ray emission detector. KW - X-ray KW - Color X-ray camera KW - CXC KW - Synchrotron radiation KW - BESSY KW - BAMline PY - 2015 DO - https://doi.org/10.1002/xrs.2590 SN - 0049-8246 VL - 44 IS - 3 SP - 135 EP - 140 PB - Wiley & Sons, Ltd. CY - Chichester AN - OPUS4-33170 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin-Sanchez, Pedro Maria T1 - Detection and quantification methods for material-colonizing microorganisms by pPCR: from rock paintings in Lascaux to photovoltaic panels T2 - DECHEMA /GfKORR-Fachgruppensitzung "Mikrobielle Materialzerstörung und Materialschutz" T2 - DECHEMA /GfKORR-Fachgruppensitzung "Mikrobielle Materialzerstörung und Materialschutz" CY - Frankfurt am Main, Deutschland DA - 2014-10-17 PY - 2014 AN - OPUS4-33172 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tissot, I. A1 - Troalen, L.G. A1 - Manso, M. A1 - Ponting, M. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Barreiros, M. A. A1 - Shaw, I. A1 - Carvalho, M.L. A1 - Guerra, M.F. T1 - A multi-analytical approach to gold in Ancient Egypt: Studies on provenance and corrosion JF - Spectrochimica acta B N2 - Recent results from a three-year multi-disciplinary project on Ancient Egyptian gold jewellery revealed that items of jewellery from the Middle Kingdom to the New Kingdom were manufactured using a variety of alluvial gold alloys. These alloys cover a wide range of colours and the majority contain Platinum Group Elements inclusions. However, in all the gold foils analysed, these inclusions were found to be absent. In this work a selection of gilded wood and leather items and gold foil fragments, all from the excavations by John Garstang at Abydos (primarily from Middle Kingdom graves), were examined using Scanning Electron Microscopy-Energy Disperse Spectroscopy (SEM-EDS), X-Ray Fluorescence (µXRF), Particle Induced X-Ray Emission (µPIXE) and Double Dispersive X-Ray Fluorescence (D²XRF). The work allowed us to characterise the composition of the base-alloys and also to reveal the presence of Pt at trace levels, confirming the use of alluvial gold deposits. Corrosion products were also investigated in the foils where surface tarnish was visually observed. Results showed that the differences in the colour of corrosion observed for the foils are related not only to the thickness of the corrosion layer but also to a multi-layer structure containing the various corrosion products. KW - Gold KW - Egypt KW - PGE KW - Provenance KW - Corrosion KW - muXRF KW - muPIXE KW - D2XRF KW - SEM-EDS PY - 2015 DO - https://doi.org/10.1016/j.sab.2015.03.012 SN - 0584-8547 SN - 0038-6987 VL - 108 SP - 75 EP - 82 PB - Elsevier CY - Amsterdam AN - OPUS4-33155 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Wehrstedt, Klaus-Dieter A1 - Seifert, Alexander A1 - Bulin, Michael T1 - Sicherheitstechnische Kenngrößen brennbarer Stäube in Datenbanken - Besonderheiten, Anwendungsgrenzen, Bandbreiten JF - Schüttgut N2 - Während die Gefahr von Explosionen dort besteht, wo Stäube aufgewirbelt vorliegen, bergen abgelagerte Stäube das Risiko von Bränden. Die Beurteilung daraus entstehender Gefahren und das Auslegen von vorbeugenden und konstruktiven Schutzmaßnahmen erfolgt über sicherheitstechnische Kenngrößen (STK). Diese lagen bislang in Datenbanken nur in Einzelwerten vor und wurden nun zu Gruppen zusammengefasst. Das Besondere daran: Erstmals werden nun bewertete Bandbreiten angegeben, in denen sich die STK der Stäube bewegen. KW - Brennbare Stäube KW - Kenngrößen KW - Staubexplosionen KW - Brände PY - 2015 SN - 0946-7939 VL - 21 IS - 2 SP - 56 EP - 60 PB - Vogel Trans Tech Publications CY - Würzburg AN - OPUS4-33119 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Nehrig, Marko A1 - Bletzer, Claus Wilhelm A1 - Musolff, André A1 - Wille, Frank T1 - Combustion of shock absorber under IAEA thermal test conditions - recent testing - T2 - IRSN/BAM-Workshop about fire testing T2 - IRSN/BAM-Workshop about fire testing CY - Paris, France DA - 2015-04-13 PY - 2015 AN - OPUS4-33143 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Müller, Thoralf A1 - Heyn, Andreas A1 - Babutzka, Martin A1 - Rosemann, P. T1 - Examination of the influence of heat treatment on the corrosion resistance of martensitic stainless steels JF - Materials and corrosion N2 - Martensitic stainless steels are commonly used in cutlery fabrication requiring high hardness and sufficient corrosion resistance. The heat treatment process affects the mechanical and electrochemical behavior of martensitic stainless steels due to the precipitation of chromium carbides. Depending on the heat treatment the corrosion resistance of these steels can vary strongly, and improper heat treatment parameters can lead to a weak pitting corrosion resistance. The aim of this work is to identify heat treatment parameters influencing the corrosion resistance of martensitic stainless steels by using three different electrochemical testing methods. To this purpose, five different heat treatments were applied to the alloys 1.4116 and 1.4034. In addition to the determination of the critical pitting potentials and the modified double-loop electrochemical potentiodynamic reactivation tests (DL-EPR) a new KorroPad indicator test was used assessing the pitting corrosion behavior. The results showed that all methods used were in good agreement for verifying the influence of the various heat treatment parameters on the corrosion behavior and to identify the effect of heat treatment conditions on the pitting corrosion resistance. KW - DL-EPR KW - Heat treatment KW - KorroPad KW - Martensitic stainless steel KW - Pitting corrosion PY - 2015 DO - https://doi.org/10.1002/maco.201407861 SN - 0947-5117 SN - 1521-4176 VL - 66 IS - 7 SP - 656 EP - 662 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-33621 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Martin-Sanchez, Pedro Maria A1 - Toepel, Jörg A1 - Kunte, Hans-Jörg A1 - Gorbushina, Anna T1 - Fast and reliable qPCR-based detection of microbial contamination in fuel systems T2 - 5th International Symposium on Applied Microbiology and Molecular Biology in Oil Systems (ISMOSS) T2 - 5th International Symposium on Applied Microbiology and Molecular Biology in Oil Systems (ISMOSS) CY - Stavanger, Norway DA - 2015-06-02 PY - 2015 AN - OPUS4-33589 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Muhr, Verena A1 - Wilhelm, Stefan A1 - Würth, Christian A1 - Heiland, Josef A1 - Carillo-Carrion, Carolina A1 - Wolfbeis, Otto S. A1 - Resch-Genger, Ute A1 - Hirsch, Thomas T1 - Influence of Surface Modification on the Luminescence and Colloidal Stability of Water Dispersible Upconverting Nanoparticles T2 - Anakon 2015 T2 - Anakon 2015 CY - Anakon 2015 DA - 2015-03-23 PY - 2015 AN - OPUS4-33656 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Würth, Christian A1 - Geißler, Daniel A1 - Behnke, Thomas A1 - Kaiser, Martin A1 - Resch-Genger, Ute T1 - Critical review of the determination of photoluminescence quantum yields of luminescent reporters JF - Analytical and bioanalytical chemistry N2 - A crucial variable for methodical performance evaluation and comparison of luminescent reporters is the photoluminescence quantum yield (Φ pl). This quantity, defined as the number of emitted photons per number of absorbed photons, is the direct measure of the efficiency of the conversion of absorbed photons into emitted light for small organic dyes, fluorescent proteins, metal–ligand complexes, metal clusters, polymeric nanoparticles, and semiconductor and up-conversion nanocrystals. Φ pl determines the sensitivity for the detection of a specific analyte from the chromophore perspective, together with its molar-absorption coefficient at the excitation wavelength. In this review we discuss different optical and photothermal methods for measuring Φ pl of transparent and scattering systems for the most common classes of luminescent reporters, and critically evaluate their potential and limitations. In addition, reporter-specific effects and sources of uncertainty are addressed. The ultimate objective is to provide users of fluorescence techniques with validated tools for the determination of Φ pl, including a series of Φ pl standards for the ultraviolet, visible, and near-infrared regions, and to enable better judgment of the reliability of literature data. KW - Fluorescence KW - Photoluminescence KW - Quantum yield KW - Organic dye KW - Nanoparticle KW - Quantum dot KW - Up-conversion nanocrystal KW - Optical probe KW - Standard KW - Quality assurance KW - Integrating sphere spectroscopy KW - Photoacoustic spectroscopy KW - Thermal lensing KW - Nanocavity PY - 2015 DO - https://doi.org/10.1007/s00216-014-8130-z SN - 1618-2642 SN - 1618-2650 VL - 407 IS - 1 SP - 59 EP - 78 PB - Springer CY - Berlin AN - OPUS4-32406 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wilhelm, Stefan A1 - Kaiser, Martin A1 - Würth, Christian A1 - Heiland, J. A1 - Carrillo-Carrion, C. A1 - Muhr, V. A1 - Wolfbeis, Otto S. A1 - Parak, W.J. A1 - Resch-Genger, Ute A1 - Hirsch, T. T1 - Water dispersible upconverting nanoparticles: effects of surface modification on their luminescence and colloidal stability JF - Nanoscale N2 - We present a systematic study on the effect of surface ligands on the luminescence properties and colloidal stability of β-NaYF4:Yb3+,Er3+ upconversion nanoparticles (UCNPs), comparing nine different surface coatings to render these UCNPs water-dispersible and bioconjugatable. A prerequisite for this study was a large-scale synthetic method that yields ~2 g per batch of monodisperse oleate-capped UCNPs providing identical core particles. These ~23 nm sized UCNPs display an upconversion quantum yield of ~0.35% when dispersed in cyclohexane and excited with a power density of 150 W cm-2, underlining their high quality. A comparison of the colloidal stability and luminescence properties of these UCNPs, subsequently surface modified with ligand exchange or encapsulation protocols, revealed that the ratio of the green (545 nm) and red (658 nm) emission bands determined at a constant excitation power density clearly depends on the surface chemistry. Modifications relying on the deposition of additional (amphiphilic) layer coatings, where the initial oleate coating is retained, show reduced non-radiative quenching by water as compared to UCNPs that are rendered water-dispersible via ligand exchange. Moreover, we could demonstrate that the brightness of the upconversion luminescence of the UCNPs is strongly affected by the type of surface modification, i.e., ligand exchange or encapsulation, yet hardly by the chemical nature of the ligand. KW - upconverting nanoparticles (UCNPs) KW - Luminescence KW - surface modification PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-324071 DO - https://doi.org/10.1039/c4nr05954a SN - 2040-3364 SN - 2040-3372 VL - 7 IS - 4 SP - 1403 EP - 1410 PB - RSC Publ. CY - Cambridge AN - OPUS4-32407 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hatami, Soheil A1 - Würth, Christian A1 - Kaiser, Martin A1 - Leubner, S. A1 - Gabriel, S. A1 - Bahrig, L. A1 - Lesnyak, V. A1 - Pauli, Jutta A1 - Gaponik, N. A1 - Eychmüller, A. A1 - Resch-Genger, Ute T1 - Absolute photoluminescence quantum yields of IR26 and IR-emissive Cd1-xHgxTe and PbS quantum dots - method- and material-inherent challenges JF - Nanoscale N2 - Bright emitters with photoluminescence in the spectral region of 800–1600 nm are increasingly important as optical reporters for molecular imaging, sensing, and telecommunication and as active components in electrooptical and photovoltaic devices. Their rational design is directly linked to suitable methods for the characterization of their signal-relevant properties, especially their photoluminescence quantum yield (Φf). Aiming at the development of bright semiconductor nanocrystals with emission >1000 nm, we designed a new NIR/IR integrating sphere setup for the wavelength region of 600–1600 nm. We assessed the performance of this setup by acquiring the corrected emission spectra and Φf of the organic dyes Itrybe, IR140, and IR26 and several infrared (IR)-emissive Cd1-xHgxTe and PbS semiconductor nanocrystals and comparing them to data obtained with two independently calibrated fluorescence instruments absolutely or relative to previously evaluated reference dyes. Our results highlight special challenges of photoluminescence studies in the IR ranging from solvent absorption to the lack of spectral and intensity standards together with quantum dot-specific challenges like photobrightening and photodarkening and the size-dependent air stability and photostability of differently sized oleate-capped PbS colloids. These effects can be representative of lead chalcogenides. Moreover, we redetermined the Φf of IR26, the most frequently used IR reference dye, to 1.1 × 10-3 in 1,2-dichloroethane DCE with a thorough sample reabsorption and solvent absorption correction. Our results indicate the need for a critical reevaluation of Φf values of IR-emissive nanomaterials and offer guidelines for improved Φf measurements. PY - 2015 DO - https://doi.org/10.1039/c4nr04608k SN - 2040-3364 SN - 2040-3372 VL - 7 IS - 1 SP - 133 EP - 143 PB - RSC Publ. CY - Cambridge AN - OPUS4-32408 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Sicherstellung des Korrosionsschutzes durch werkstoffgerechte Verarbeitung nichtrostender Stähle T2 - 23. Erfahrungsaustausch und Weiterbildung für Schweißaufsichtspersonen und Verantwortliche der werkseigenen Produktionskontrolle im bauaufsichtlichen Bereich der SLV Halle T2 - 23. Erfahrungsaustausch und Weiterbildung für Schweißaufsichtspersonen und Verantwortliche der werkseigenen Produktionskontrolle im bauaufsichtlichen Bereich der SLV Halle CY - Dresden, Germany DA - 2015-02-25 PY - 2015 AN - OPUS4-32715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Lehmann, Jens T1 - Sicherstellung des Korrosionsschutzes durch werkstoffgerechte Verarbeitung nichtrostender Stähle T2 - 23. Erfahrungsaustausch und Weiterbildung für Schweißaufsichtspersonen und Verantwortliche der werkseigenen Produktionskontrolle im bauaufsichtlichen Bereich der SLV Halle T2 - 23. Erfahrungsaustausch und Weiterbildung für Schweißaufsichtspersonen und Verantwortliche der werkseigenen Produktionskontrolle im bauaufsichtlichen Bereich der SLV Halle CY - Halle, Germany DA - 2015-02-26 PY - 2015 AN - OPUS4-32716 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Klippel, Alexander A1 - Schmidt, Martin A1 - Krause, U. T1 - Dustiness in workplace safety and explosion protection - review and outlook JF - Journal of loss prevention in the process industries N2 - Behavior of dust/air mixtures is very complex and difficult to predict since it depends on material properties as well as boundary conditions. Without other influences airborne particles deposit due to gravity but the time it takes for total deposition as well as easiness of resurrection depends very much on the specific dust sample and the boundary conditions. It still lacks a complete understanding of all interacting reasons and one approach is using experimentally determined characteristics, one is named dustiness. Dustiness is the tendency of dust to form clouds and to stay airborne. Dustiness is determined with two basic principles, which are light attenuation and ratio of filled-in and measured mass. Assessment of dustiness of industrial powders has been done for a long time regarding work place safety. Dustiness is used there to determine inhalable fraction and to evaluate health risks. Lately it became interesting in dust explosion protection as well. Dustiness could be used to optimize determination of zones, adaption of venting area and/or for positioning of suppression systems. Dustiness can be useful in many ways but is not a physical property of dusts, therefore it depends on material properties such as density, particle size distribution, shape and water content as well as boundary conditions or determination method. This makes it very difficult to compare dustiness for different techniques and apparatuses and determination method as well as results should be considered carefully. This work gives an overview of existing standards, recent research and suggests improvements to the new dustiness as proposed for dust explosion protection. KW - Dustiness KW - Measurement methods KW - Workplace exposure KW - Dust explosion protection PY - 2015 DO - https://doi.org/10.1016/j.jlp.2015.01.011 SN - 0950-4230 SN - 1873-3352 VL - 34 SP - 22 EP - 29 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-32467 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vasilescu, A. A1 - Constantinescu, B. A1 - Stan, D. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Ceccato, D. T1 - Studies on ancient silver metallurgy using SR XRF and micro-PIXE JF - Radiation physics and chemistry N2 - This work presents a complex evaluation of a series of Geto-Thracian silver adornments found on Romanian territory, part of the 4th century BC Agighiol (Northern Dobruja) hoard and of an ingot from the 1st century BC Geto-Dacian Surcea (Transylvania) hoard, using Synchrotron Radiation X-Ray Fluorescence and micro- Proton Induced X-ray Emission analysis and mapping in order to investigate aspects related to the elemental composition of the metal and the metallurgy implied in their manufacture. One of the samples can be linked to Laurion as the source of metal, and several items contain silver probably originated in Macedonia. The set of silver items was found to be heteregenous as composition and microstructure, and corrosion-related elements could be also identified in the X-Ray maps. KW - Synchrotron radiation XRF KW - Micro-PIXE KW - Archaeological silver PY - 2015 DO - https://doi.org/10.1016/j.radphyschem.2015.07.008 SN - 0969-806X SN - 0020-7055 SN - 0146-5724 VL - 117 SP - 26 EP - 34 PB - Pergamon Press CY - Oxford [u.a.] ; Frankfurt, M. AN - OPUS4-33809 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Arppe, Riika A1 - Hyppänen, I. A1 - Perälä, N. A1 - Peltomaa, R. A1 - Kaiser, Martin A1 - Würth, Christian A1 - Christ, S. A1 - Resch-Genger, Ute A1 - Schäferling, Michael A1 - Soukka, T. T1 - Quenching of the upconversion luminescence of NaYF4:Yb3+,Er3+ and NaYF4:Yb3+,Tm3+ nanophosphors by water: the role of the sensitizer Yb3+ in non-radiative relaxation JF - Nanoscale N2 - We have studied the mechanisms of water-based quenching of the upconversion photoluminescence of upconverting nanophosphors (UCNPs) via luminescence decay measurements for a better understanding of the non-radiative deactivation pathways responsible for the relatively low upconversion luminescence efficiency in aqueous solutions. This included both upconversion luminescence measurements and the direct excitation of emissive energy states of Er3+ and Yb3+ dopants in NaYF4:Yb3+,Er3+ UCNPs by measuring the decays at 550 and 655 nm upon 380 nm excitation and at 980 nm upon 930 nm excitation, respectively. The luminescence intensities and decays were measured from both bare and silanized NaYF4:Yb3+,Er3+ and NaYF4:Yb3+,Tm3+ UCNPs in H2O and D2O. The measurements revealed up to 99.9% quenching of the upconversion photoluminescence intensity of both Er3+ and Tm3+ doped bare nanophosphors by water. Instead of the multiphonon relaxation of excited energy levels of the activators, the main mechanism of quenching was found to be the multiphonon deactivation of the Yb3+ sensitizer ion caused by OH-vibrations on the surface of the nanophosphor. Due to the nonlinear nature of upconversion, the quenching of Yb3+ has a higher order effect on the upconversion emission intensity with the efficient Yb–Yb energy migration in the ~35 nm nanocrystals making the whole nanophosphor volume susceptible to surface quenching effects. The study underlines the need of efficient surface passivation for the use of UCNPs as labels in bioanalytical applications performed in aqueous solutions. PY - 2015 DO - https://doi.org/10.1039/c5nr02100f SN - 2040-3364 SN - 2040-3372 VL - 7 IS - 27 SP - 11746 EP - 11757 PB - RSC Publ. CY - Cambridge AN - OPUS4-33815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fittschen, U. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Böttger, S. A1 - Rosenberg, D. A1 - Menzel, M. A1 - Jensen, W. A1 - Busker, M. A1 - Gotlib, Z. A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Wobrauschek, P. A1 - Streli, C. ED - de Oliveira Guilherme Buzanich, Ana T1 - A setup for synchrotron-radiation-induced total reflection X-ray fluorescence and X-ray absorption near-edge structure recently commissioned at BESSY II BAMline JF - Journal of Synchrontron Radiation N2 - An automatic sample changer chamber for total reflection X-ray fluorescence (TXRF) and X-ray absorption near-edge structure (XANES) analysis in TXRF geometry was successfully set up at the BAMline at BESSY II. TXRF and TXRF-XANES are valuable tools for elemental determination and speciation, especially where sample amounts are limited (<1 mg) and concentrations are low (ng ml⁻¹ to μg ml⁻¹). TXRF requires a well defined geometry regarding the reflecting surface of a sample carrier and the synchrotron beam. The newly installed chamber allows for reliable sample positioning, remote sample changing and evacuation of the fluorescence beam path. The chamber was successfully used showing accurate determination of elemental amounts in the certified reference material NISTwater 1640. Low limits of detection of less than 100 fg absolute (10 pg ml⁻¹) for Ni were found. TXRF-XANES on different Re species was applied. An unknown species of Re was found to be Re in the +7 oxidation state. KW - TXRF KW - TXRF-XANES KW - Sample changer KW - BAMline KW - Re-XANES PY - 2016 DO - https://doi.org/10.1107/S1600577516001995 SN - 1600-5775 VL - 23 IS - 3 SP - 820 EP - 824 PB - International Union of Crystallography AN - OPUS4-38656 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Frost, K. A1 - Lüth, Peter A1 - Schmidt, Martin A1 - Simon, K. A1 - Uhlig, St. T1 - Evaluation of the interlaboratory test 2015-2016 on the method DIN EN 15188:2007 “Determination of the spontaneous ignition behaviour of dust accumulations” N2 - For the classification, safe handling and use of the chemicals, special standardized testing procedures have been developed and are used worldwide. Safety experts must be able to fully rely on the precise execution of the respective laboratory tests and assessments. In this context, interlaboratory tests are a crucial element of a laboratory's quality system. Participation in interlaboratory tests is explicitly recommended by the standard ISO/IEC 17025. The present document reports the results of the interlaboratory test 2015-2016, which was performed on the test method DIN EN 15188:2007 “Determination of the spontaneous ignition behaviour of dust accumulations”. It was organized by BAM in the frame of the co-operation project CEQAT-DGHS Centre for Quality Assurance for Testing of Dangerous Goods and Hazardous Substances. The test method DIN EN 15188:2007 is applied to characterize the self-ignition behaviour of combustible dusts. The experimental basis for describing the self-ignition behaviour of a given dust is the determination of the self-ignition temperatures (TSI) of differently-sized volumes of the dust sample by isoperibolic hot storage experiments (storage at constant oven temperatures) in commercially available ovens. The results measured this way reflect the dependence of the self-ignition temperatures on the volume of a dust accumulation. The interlaboratory test 2015-2016 on the method DIN EN 15188:2007 is the latest in a systematic stepwise built up series of method validation interlaboratory tests and internal laboratory investigations. The aim of this interlaboratory test was to determine measurement uncertainties of the modified method DIN EN 15188 for different substances, covering a sufficiently wide range of self-ignition behaviours in the scope of the DIN EN 15188 of the four basket test to extrapolate to storage volumes up to 1000 m³ and the single basket test for a basket volume of 1000 cm³. The precision of the four basket test and the single basket of the modified method DIN EN 15188 can be assessed as acceptable for the four sample materials investigated in the current interlaboratory test 2015-2016. It was possible to derive a functional equation for the measurement uncertainty U depending on the storage volume V. The measurement uncertainty cannot be ignored and must be considered, if TSI results should be used in practice. KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung KW - Messunsicherheit KW - Dangerous goods KW - Hazardous substances KW - Round robin test KW - Interlaboratory comparison KW - Test method KW - Validation KW - Measurement uncertainty PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-387343 SN - 978-3-9818270-0-2 SP - 1 EP - 106 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38734 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Becker, D. A1 - Konnertz, Nora A1 - Böhning, Martin A1 - Schmidt, J. A1 - Thomas, A. T1 - Light-switchable polymers of intrinsic microporosity JF - Chemistry of Materials N2 - The interest in (micro)porous systems is greater than ever before with microporous polymers finding application in areas such as gas storage/separation and catalysis. In contrast to the vast majority of publications on microporous polymers seeking ever higher values for surface area or uptake capacity for a particular gas, this work presents a means to render a microporous system responsive to electromagnetic stimuli. The incorporation of a diarylethene (DAE) derivative in the backbone of a polymer of intrinsic microporosity (PIM) produces a microporous system that exhibits photochromism as proven by UV–vis absorption and NMR studies. In the resulting DAE-PIM, surface area is not a fixed unalterable property but can be influenced by the external and nondestructive stimulus light in a reversible manner. Furthermore, in combination with Matrimid, free-standing membranes can be produced that display light-switchable diffusivity and permeability for carbon dioxide and oxygen. In this way, material scientists are offered the potential to employ only one system that can assume several states with different properties for each. KW - Gaspermeation KW - Diffusion KW - Polymer intrinsischer Mikroporosität KW - UV-VIS PY - 2016 DO - https://doi.org/10.1021/acs.chemmater.6b02619 SN - 0897-4756 VL - 28 IS - 23 SP - 8523 EP - 8529 PB - ACS CY - Whashington,DC AN - OPUS4-38735 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Margreiter, R. A1 - Eberhardt, K. A1 - Niemeyer, B. A1 - Strub, E. T1 - Investigation on fire gilding using XRF and NAA N2 - Fire-gilding or amalgam gilding is a historical technique for the gilding of objects. The object to be gilded is coated with an amalgam (a solution of gold (Au) in mercury (Hg)). By heating, the largest part of the Hg is subsequently evaporated and there remains a gold layer, containing still detectable amounts of Hg. The information on the used gilding technique might be crucial for the conservation and preservation of archaeological objects. Therefore, the main objective of this work is the detailed understanding of the behaviour of Hg under conditions of fire gilding. I.e. the understanding of the diffusion and evaporating behaviour of Hg, depending on parameters like substrate material (silver, copper, bronze, brass...), heating temperature and duration, and the resulting Hg depth profiles under these conditions. Secondary objective is the establishment of a measurement protocol for the unambiguous identification of different types of gilding, based solely on non-destructive methods, which can be applied to historical samples. In a first step, fire-gilded samples have been prepared on Cu and Ag sheet metal, respectively. Some of the gildings were produced by a professional goldsmith; another set of samples was produced under laboratory conditions. These samples have been examined with NAA (neutron activation analysis) and SR-XRF (synchrotron radiation induced X-ray fluorescence). First results of these measurements will be presented and discussed. T2 - Synchrotron Radiation and Neutrons in Art & Archaeology (SR2A) CY - Chicago, IL, USA DA - 06.09.2016 KW - Synchrotron KW - BAMline KW - XRF KW - Archaeometry PY - 2016 AN - OPUS4-38766 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Es ist nicht alles Gold was glänzt - Die Analyse von Gold mit Synchrotronstrahlung N2 - Gold ist eines der sieben schon im Altertum bekannten Metalle und wurde wg. seines Glanzes und seiner Seltenheit von alters her als Tauschmittel und zur Herstellung von Schmuck benutzt. Außerdem ist es einfach bearbeitbar und weitestgehend gegen chemische Einflüsse resistent. Die Untersuchungen von Gold mit synchrotronstrahlungsangeregter Röntgenfluoreszenzanalyse sind zerstörungsfrei und geben Auskunft über die in der untersuchten Probe vorhandenen chemischen Elemente. Bei den hier vorgestellten Untersuchungen an der BAMline stehen Fragestellungen wie Herkunft, Herstellungsverfahren und Zusammengehörigkeit von Goldfunden im Vordergrund. Die verschiedenen Fragestellungen werden an einer Reihe von Beispielen erläutert die vom Wikingerschatz aus Hiddensee über die Himmelsscheibe von Nebra bis hin zu Funden aus Ägypten langen. Zusätzlich werden die modernen Messmethoden vorgestellt, die am Synchrotron heutzutage zur Verfügung stehen. T2 - Vortragsreihe „Naturwissenschaftliche Einsichten in Kunst- und Kulturgut" CY - Dresden, Germany DA - 13.10.2016 KW - Synchrotron KW - BAMline KW - Gold KW - XRF PY - 2016 AN - OPUS4-38809 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Von Ägypten bis Hiddensee – Analyse von Gold mit Synchrotronstrahlung N2 - Gold ist eines der sieben schon im Altertum bekannten Metalle und wurde wg. seines Glanzes und seiner Seltenheit von alters her als Tauschmittel und zur Herstellung von Schmuck benutzt. Außerdem ist es einfach bearbeitbar und weitestgehend gegen chemische Einflüsse resistent. Die Untersuchungen von Gold mit synchrotronstrahlungsangeregter Röntgenfluoreszenzanalyse sind zerstörungsfrei und geben Auskunft über die in der untersuchten Probe vorhandenen chemischen Elemente. Bei den hier vorgestellten Untersuchungen an der BAMline stehen Fragestellungen wie Herkunft, Herstellungsverfahren und Zusammengehörigkeit von Goldfunden im Vordergrund. Die verschiedenen Fragestellungen werden an einer Reihe von Beispielen erläutert die vom Wikingerschatz aus Hiddensee über die Himmelsscheibe von Nebra bis hin zu Funden aus Ägypten langen. Zusätzlich werden die modernen Messmethoden vorgestellt, die am Synchrotron heutzutage zur Verfügung stehen. T2 - Vorlesung FU Berlin Einführung in die Archäometrie CY - Berlin, Germany DA - 04.11.2016 KW - Synchrotron KW - BAMline KW - Gold KW - XRF PY - 2016 AN - OPUS4-38810 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Scharf, O. T1 - The Colour X-ray Camera – Basics and Applications of a 2D X-ray Detector N2 - The Color X-ray Camera CXC or SLcam® is an energy-resolving X-ray camera capable of energy- and space-resolved measurements. It consists of a high-speed CCD detector coupled to a polycapil-lary optic that conducts the X-ray photons from the probe to distinct pixels onto the detector. The camera is capable of fast acquisition of spatially and energy resolved fluorescence images. A dedicated software enables the acquisition and the online processing of the spectral data for all 69696 pixels, leading to a real-time visualization of the elements distribution in a sample. It was developed in a joint project with BAM, IFG Berlin and PN Sensors. In this contribution we will mainly discuss the use of the CXC at our beamline, the BAMline at BESSY II and imaging applications of the CXC from different areas, like biology and archaeometry. Additionally new developments for the use of the detector without optics, like wavelength dispersive detection or 1shot-XANES, will be presented. T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin CY - Wien, Austria DA - 20.01.2016 KW - Synchrotron KW - BAMline KW - XRF PY - 2016 AN - OPUS4-38811 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - de Oliveira Guilherme Buzanich, Ana A1 - Kabelitz, Anke A1 - Rolf, Simone A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe A1 - Emmerling, Franziska T1 - First in situ measurements with a newly developed SR-based ‘Single-shot‘ EXAFS set-up N2 - The newly developed EXAFS set-up comprises both time- and spatially-resolved EXAFS information simultaneously in a single-shot. This facile, stable and scanningless set-up was tested at the BAMline @ BESSY-II (Berlin, Germany). The primary broadband beam is generated by a filter/X-ray-mirror combination (bandpass). The transmitted beam through the sample is diffracted by a convexly bent Si (111) crystal, producing a divergent beam. This, in turn, is collected by an area sensitive detector based on a CCD camera, in a theta - 2 theta geometry. The first in situ measurements were successfully carried out and hereby presented. The case-study involved a well known reaction, in which structural changes are induced over time, and continuously measured. We were able to track structural changes within a 1s time resolution. T2 - European Conference on X-Ray Spectrometry (EXRS) CY - Gothenburg, Sweden DA - 19.06.2016 KW - Synchrotron KW - BAMline KW - EXAFS PY - 2016 AN - OPUS4-38807 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Neri, E. A1 - Reinholz, Uwe A1 - Guerra, M.F. T1 - Following Pt in gold Byzantine tesserae: towards provenance and chronology with SR-XRF N2 - Gold mosaics, made from gold and glass, are one of the best expressions of Late Antique Byzantine and Early Islamic art. The gold alloys, whose composition seems to indicate that gold coins were re-used to fabricate the tesserae, can be used to provide information on the mosaics chronology. Monetary Byzantine gold is in fact characterized by the presence of Pt, which contents in the gold alloy change over time, but Pt must be measured in 0.2-0.4 µm thickness gold leaves that were beaten to be sandwiched between two glass layers. To analyze this samples the D²XRF set-up at the BAMline at the BESSY synchrotron in Berlin was used. The combination of a crystal for wavelength dispersion and an energy resolving single photon counting pnCCD allows the realization of this very simple wavelength dispersive detection system. With this system an MDL of 1 μg/g for the determination of Pt in Au under optimal conditions can be reached. Gold leaf tesserae from nine archaeological sites, covering the period that goes from the 5th c. to the 8th c., were analyzed. The presence of Pt in the majority of the samples confirmed the re-use of coins. The Pt contents separate the samples in three groups, one of which having the same chemical characteristics as the Byzantine gold could be compared to dated coins for chronology. The higher Pt contents for one of other groups suggest T2 - Synchrotron Radiation and Neutrons in Art & Archaeology (SR2A) CY - Chicago, USA DA - 06.09.2016 KW - Synchrotron KW - BAMline KW - XRF KW - Archaeometry KW - D2XRF PY - 2016 AN - OPUS4-38808 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten zur Beschreibung der Korrosionsschutzwirkung von Zinküberzügen N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität der gebildeten Deckschichten unter verschiedenen klimatischen Bedingungen erlauben. In diesem Beitrag wird anhand verschiedener Deckschichtzustände an Zink der Mehrwert von Untersuchungen mit gelartigen Elektrolyten für die Korrosionsforschung verdeutlicht. T2 - 16. Tagung "Korrosionsschutz in der maritimen Technik" CY - Hamburg, Germany DA - 25.01.2017 KW - Deckschichtbildung KW - Layer formation KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Korrosionsprüfung KW - Corrosion testing KW - Zinkdeckschichten KW - Zinc coatings PY - 2017 AN - OPUS4-39039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten zur Beschreibung der Korrosionsschutzwirkung von Zinküberzügen T2 - Tagungsband zur 16. Tagung "Korrosionsschutz in der maritimen Technik" N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität der gebildeten Deckschichten unter verschiedenen klimatischen Bedingungen erlauben. In diesem Beitrag wird anhand verschiedener Deckschichtzustände an Zink der Mehrwert von Untersuchungen mit gelartigen Elektrolyten für die Korrosionsforschung verdeutlicht. T2 - 16. Tagung "Korrosionsschutz in der maritimen Technik" CY - Hamburg, Germany DA - 25.01.2017 KW - Deckschichtbildung KW - Layer formation KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Korrosionsprüfung KW - Corrosion testing KW - Zinkdeckschichten KW - Zinc coatings PY - 2017 SN - 978-3-935406-64-2 VL - 16 SP - 35 EP - 44 AN - OPUS4-39041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hachmöller, O. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Aichler, M. A1 - Radtke, Martin A1 - Dietrich, D. A1 - Schwamborn, K. A1 - Lutz, L. A1 - Werner, M. A1 - Sperling, M. A1 - Walch, A. A1 - Karst, U. T1 - Elemental bioimaging and speciation analysis for the investigation of Wilsons disease using μXRF and XANES JF - Metallomics N2 - A liver biopsy specimen from a Wilson’s disease (WD) patient was analyzed by means of micro-X-ray fluorescence (mXRF) spectroscopy to determine the elemental distribution. First, bench-top mXRF was utilized for a coarse scan of the sample under laboratory conditions. The resulting distribution maps of copper and iron enabled the determination of a region of interest (ROI) for further analysis. In order to obtain more detailed elemental information, this ROI was analyzed by synchrotron radiation (SR)-based mXRF with a beam size of 4 mm offering a resolution at the cellular level. Distribution maps of additional elements to copper and iron like zinc and manganese were obtained due to a higher sensitivity of SR-mXRF. In addition to this, X-ray absorption near edge structure spectroscopy (XANES) was performed to identify the oxidation states of copper in WD. This speciation analysis indicated a mixture of copper(I) and copper(II) within the WD liver tissue. KW - progressive hepatolenticular degeneration KW - mXRF Micro-X-ray fluorescence spectroscopy KW - XANES X-ray absorption near edge structure spectroscopy PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-360811 DO - https://doi.org/10.1039/C6MT00001K SN - 1756-5901 SN - 1756-591X PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-36081 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babutzka, Martin A1 - Heyn, A. T1 - Corrosion investigations by using gel-type electrolytes JF - IOP Conf. Series: Materials Science and Engineering N2 - Limitations are encountered regarding the electrolyte when studying atmospheric corrosion reactions on materials that form protective layers on their surface or tend to passivate. For example, the reconstruction of a thin wet film, as well as the interpretation of electrochemical measurements in so-called bulk solutions (a "mass" of electrolyte), often proves to be difficult in view of corrosion behavior under atmospheric conditions. A new approach to this problem in corrosion research includes the use of gel-type electrolytes as an alternative to bulk electrolytes. Gel-type electrolytes form a thin wet film on the surface of the material, whereby the naturally formed protective layer is affected similar to atmospheric conditions and can be examined in an almost non-destructive way. Through electrochemical instrumentation specific values such as polarization resistances and corrosion currents can be determined providing information on kinetics of surface layer formation and stability of surface layers formed under the influence of a thin wet film. Thus, new test methods can be developed that supply a better understanding of corrosion processes in specific atmospheres. In this article different zinc coatings and aluminium alloys were investigated, their naturally formed protective layers were electrochemically characterized and corrosion relevant values were determined by using a gel pad based on polysaccharide. Corrosion relevant values allowed the differentiation of various coating systems and could describe the current protective effect provided by the coating. It is shown that gel-type electrolytes influence protective layers and coatings considerably less than corresponding bulk electrolytes and that an atmospheric wet film is approached by these test conditions. From the results it is evident that gel-type electrolytes represent a viable and promising field in corrosion research. T2 - 18th Chemnitz Seminar on Materials Engineering – 18. Werkstofftechnisches Kolloquium CY - Chemnitz, Germany KW - Corrosion investigations KW - Gel-type electrolytes KW - Zinc coatings PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-366680 DO - https://doi.org/10.1088/1757-899X/118/1/011002 VL - 118 SP - 17 PB - IOP Publishing CY - Bristol, UK AN - OPUS4-36668 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Corrosion investigations on zinc coatings by using gel-type electrolytes N2 - In the presentation different zinc coatings are presented and investigated. Their naturally formed protective layers are electrochemically characterized and corrosion relevant values are determined by using a gel pad based on polysaccharide. The corrosion relevant values allow the differentiation of various zinc coating systems and can describe the current protective effect provided by the coating. It is shown that gel-type electrolytes influence protective layers and coatings considerably less than corresponding bulk electrolytes. From the results it is evident that gel-type electrolytes represent a viable and promising field in corrosion research. T2 - 7th Kurt-Schwabe-Symposium CY - Mittweida, Germany DA - 04.09.2016 KW - zinc coatings KW - gel-type electrolytes KW - corrosion investigations PY - 2016 AN - OPUS4-37409 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Corrosion investigations on zinc coatings by using gel-type electrolytes T2 - Book of Abstracts, 7th Kurt-Schwabe-Symposium N2 - In the presentation different zinc coatings are presented and investigated. Their naturally formed protective layers are electrochemically characterized and corrosion relevant values are determined by using a gel pad based on polysaccharide. The corrosion relevant values allow the differentiation of various zinc coating systems and can describe the current protective effect provided by the coating. It is shown that gel-type electrolytes influence protective layers and coatings considerably less than corresponding bulk electrolytes. From the results it is evident that gel-type electrolytes represent a viable and promising field in corrosion research. T2 - 7th Kurt-Schwabe-Symposium CY - Mittweida, Germany DA - 04.09.2016 KW - zinc coatings KW - gel-type electrolytes KW - corrosion invetsigations PY - 2016 SP - 19 AN - OPUS4-37411 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Balzer, Martin A1 - Fenker, Martin A1 - Kappl, Herbert A1 - Müller, Thoralf A1 - Heyn, Andreas A1 - Heiss, Alexandra T1 - Hunting growth defects in corrosion protective tribological hard coatings: Large area high resolution mapping as a tool for evaluating salt spray test results of TixMgyN films N2 - Hard protective coatings deposited by physical vapour deposition (PVD) methods have been characterised for decades for their corrosion protection capabilities. However, due to growth defects single PVD deposited hard coatings with a thickness below 10 μm are usually not capable to reliably protect steel substrates from corrosion in neutral salt spray (NSS) tests. In this study, 2.5 μm thick TiN and TiMgN films with Mg-contents between 10 and 35 at.-% were deposited onto 1.3505 steel samples by DC magnetron sputtering. The growth defect concentration on each as-deposited sample was determined by large area high resolution (LAHR) mapping, a confocal microscopy based measurement and evaluation method recently introduced. The NSS test results were thus evaluated not only in relation to the Mg content, but also to the amounts and sizes of growth defects, which markedly reduced random influences. Further characterisations of the TiMgN-coated samples comprised hardness, tribological and electrochemical behaviour of the films as well as the microstructure of selected growth defects. TiMgN with a high Mg content of 35 at.-% showed drastically improved corrosion protection capabilities for steel substrates compared to pure TiN. Coated polished as well as sandblasted samples showed almost no corrosion after 24 h in a NSS test. The defect concentration data further indicated an improved corrosion protection also for TiMgN with lower Mg contents. Cathodical corrosion protection was identified to be the main corrosion protection mechanism. The hardness of TiMgN with 35 at.-% Mg is markedly reduced, nevertheless it showed a good tribological behaviour against e.g. steel. This coating material hence demonstrates a unique combination of wear and corrosion protection properties. T2 - 15th International Conference on Plasma Surface Engineering CY - Garmisch-Partenkirchen, Germany DA - 12.09.2016 KW - growth defects KW - protective coatings KW - titanium nitride KW - corrosion PY - 2016 AN - OPUS4-37431 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Corrosion investigations by using gel-type electrolytes N2 - In the presentation different zinc coatings are presented and investigated. Their naturally formed protective layers are electrochemically characterized and corrosion relevant values are determined by using a gel pad based on polysaccharide. The corrosion relevant values allow the differentiation of various zinc coating systems and can describe the current protective effect provided by the coating. It is shown that gel-type electrolytes influence protective layers and coatings considerably less than corresponding bulk electrolytes. From the results it is evident that gel-type electrolytes represent a viable and promising field in corrosion research.zeige mehr T2 - EUROCORR European Corrosion Congress 2016 CY - Montpellier, France DA - 11.09.216 KW - Corrosion investigations KW - Gel-type electrolytes KW - Zinc coatings PY - 2016 AN - OPUS4-37496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Korrosionsuntersuchungen an Verzinkungen mit gelartigen Prüfelektrolyten N2 - Anhand von auf Polysaccharid basierenden Gelpads werden im Vortrag verschiedene Zinkschichtsysteme untersucht, die natürlich gebildeten Deckschichten elektrochemisch charakterisiert und korrosionsrelevante Kennwerte bestimmt. Die ermittelten Kennwerte erlauben eine Differenzierung verschiedener Schichtsysteme und können die momentane Schutzwirkung der Deckschichten unter atmosphärischen Bedingungen beschreiben. Durch den Vergleich zu Bulk-Elektrolyten wird gezeigt, dass gelartige Elektrolyte Zinkschichten deutlich geringer beeinflussen als entsprechende Bulk-Elektrolyte. Aus den Ergebnissen wird ersichtlich, dass gelartige Elektrolyte in der Korrosionsforschung ein entwicklungsfähiges und aussichtsreiches Forschungsfeld zur Beurteilung von Verzinkungen darstellen. T2 - Oberflächentage 2016 CY - Garmisch-Partenkirchen, Germany DA - 21.09.2016 KW - Korrosionsuntersuchungen KW - Corrosion investigations KW - Verzinkungen KW - Zinc coatings KW - Gelartige Elektrolyte KW - Gel-type electrolytes PY - 2016 AN - OPUS4-37497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Hahn, Oliver A1 - Denker, A. A1 - Merchel, S. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Wolff, T. ED - Armbruster, B. ED - Eilbracht, H. ED - Hahn, Oliver ED - Heinrich-Tamaska, O. T1 - Zerstörungsfreie Analyse von Metallartefakten - Eine Fallstudie T2 - Verborgenes Wissen - Innovation und Transformation feinschmiedetechnischer Entwicklungen im diachronen Vergleich N2 - Die naturwissenschaftliche Analyse historischer Materialen ermöglicht die Beantwortung kulturhistorischer Fragestellungen, die mit kunsthistorischen oder archäologischen Ansätzen allein nicht zu leisten sind. In dieser Studie wurden sechs römische Münzen mit unterschiedlich stark ausgeprägten Korrosionsschichten an unbehandelten und polierten Stellen mit vier zerstörungsfreien analytischen Methoden untersucht: Hoch- und Niederenergie Protonen Induzierter Röntgenemission (HE-/PIXE), Synchrotronstrahlungsinduzierte-Röntgenfluoreszenzanalyse (SY-RFA) und Mikro-Röntgenfluoreszenzanalyse (Mikro-RFA) mit einem mobilen Gerät. Aufgrund von Unterschieden in den Messbedingungen und dem Einfluss der Patina-Schichten auf diese ergaben sich nur für wenige Elemente Übereinstimmungen in den quantitativen Daten. Zur Validierung zukünftiger Messkampagnen mit verschiedenen Methoden sind daher Vergleichstudien unerlässlich. N2 - Investigations of physical properties and chemical composition of ancient materials generate important data for answering culture-historical questions that cannot be solved by art historical and archaeological methods alone. This contribution reports on the analysis of six Roman coins, with different degrees of corrosion layers in parts that were not handled or polished, using four non-destructive methods: low-energy particle-induced X-ray emission (PIXE, 2 MeV), high-energy PIXE (68 MeV), μ-X-ray fluorescence (XRF) spectrometry with a portable device and synchrotron-radiation induced XRF. Because of differences in the conditions needed for measurement and the influence of the layers of patina on these measurements, there were few elements where the quantitative data were in agreement. Thus comparative analyses are essential to validate future measurement projects using different methods. KW - Zerstörungsfreie Prüfung KW - Protoneninduzierte Röntgenemission KW - Röntgenfluoreszenzanalyse KW - Non-destructive testing KW - Particle-induced X-ray emission KW - X-ray fluorescence analysis PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-385702 SN - 978-3-9816751-5-3 VL - Berlin studies of the ancient world, Band 35 SP - 117 EP - 137 PB - Edition Topoi CY - Berlin AN - OPUS4-38570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten an natürlich gebildeten Zinkdeckschichten N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität der gebildeten Deckschichten erlauben. In diesem Beitrag wird anhand verschiedener Deckschichtzustände an Zink der Mehrwert von gelartigen Elektrolyten für die Korrosionsforschung verdeutlicht. T2 - Tagung Werkstoffprüfung 2016 CY - Neu-Ulm, Germany DA - 01.12.2016 KW - Zinkdeckschichten KW - Zinc coatings KW - Korrosionsprüfung KW - Corrosion-testing KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Deckschichtbildung KW - Layer formation PY - 2016 AN - OPUS4-38571 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Brandes, E. A1 - Frost, K. A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. T1 - CEQAT-DGHS Ringversuchsprogramm der BAM in Kooperation mit QuoData und PTB T2 - 14. Kolloquium zur chemischen und physikalischen Sicherheitstechnik (BAM-PTB-Kolloquium) N2 - Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. Die Bundesanstalt für Materialforschung und -prüfung (BAM) unterstützt deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS). Bei allen bisher untersuchten Prüfmethoden besteht ein Verbesserungsbedarf. Die RV müssen daher zunächst auf die Methodenentwicklung, -verbesserung und -validierung abzielen und nicht auf Leistungstests. T2 - 14. Kolloquium zur chemischen und physikalischen Sicherheitstechnik (BAM-PTB-Kolloquium) CY - Berlin, Germany DA - 14.06.2016 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 143 EP - 143 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-38464 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten an natürlich gebildeten Zinkdeckschichten T2 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis - Tagung Werkstoffprüfung 2016 N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität der gebildeten Deckschichten erlauben. In diesem Beitrag wird anhand verschiedener Deckschichtzustände an Zink der Mehrwert von gelartigen Elektrolyten für die Korrosionsforschung verdeutlicht. N2 - A new approach in electrochemical corrosion testing includes the use of gel-type electrolytes as an alternative to aqueous test electrolytes. Gel-type electrolytes enable minimally invasive studies of naturally formed zinc coatings. Thus, corrosion-relevant parameters can be determined that allow conclusions on layer formation and layer stability. This contribution will clarify the value of gel-type electrolytes for corrosion research at the example of various coatings on zinc. T2 - Tagung Werkstoffprüfung 2016 CY - Neu-Ulm, Germany DA - 01.12.2016 KW - Zinkdeckschichten KW - Zinc coatings KW - Korrosionsprüfung KW - Corrosion testing KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Deckschichtbildung KW - Layer formation PY - 2016 SN - 978-3-514-00830-4 SP - 125 EP - 130 PB - Verlag Stahleisen GmbH CY - Düsseldorf AN - OPUS4-38578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mayer, K. A1 - Krause, Martin A1 - Ibrahim, M. A1 - Schubert, Marcus T1 - Requirements for a Small Size Ultrasonic Imaging System for Inspection of Concrete Elements T2 - 19th World Conference on Non-Destructive Testing 2016 N2 - Ultrasonic imaging systems usually require an array of ultrasonic transducers for data acquisition on a wide area on top of an object under investigation. The goal of an imaging algorithm is the use of reflected ultrasound data to form a recognizable image. Conventional algorithms like SAFT are based on an inverse Huygens' principle and need therefore a dense measurement grid. This requires a big effort in data capturing. For simple and inexpensive measurement different strategies of imaging with reduced amount of data and examples with a manual scanning device on concrete elements are presented. T2 - 19th World Conference on Non-Destructive Testing 2016 CY - Munich, Germany DA - 13.06.2016 KW - NDT-CE KW - Ultrasonic echo KW - SAFT PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-388548 SP - 1245 EP - 1254 PB - DGZfP CY - Bad Breising, Germany AN - OPUS4-38854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Wiggenhauser, Herbert A1 - Mayer, K. A1 - Samokrutov, A. T1 - LAUS – Large Aperture Ultraschall N2 - Prinzip und erste Anwendungsbeispiele eines neu entwickelten Ultraschall-Arrays für die bildgebende Echomessung an sehr dicken Betonbauteilen T2 - Fachtagung Bauwerksdiagnose CY - Berlin, Germany DA - 25.02.2016 KW - Ultraschall-Echo KW - Beton KW - Ultraschall-Array KW - Abbildungsverfahren PY - 2016 AN - OPUS4-38855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strüder, L. A1 - Hartmann, R. A1 - Holl, P. A1 - Ihle, S. A1 - Huth, M. A1 - Schmidt, J. A1 - Tham, Ch. A1 - Kanngießer, B. A1 - Baumann, J. A1 - Renno, A. A1 - Grenzer, J. A1 - Radtke, Martin A1 - Abboud, A. A1 - Pietsch, U. A1 - Soltau, H. T1 - High Speed, High Resolution imaging spectrometers based on pnCCDs for XRF and XRD applications JF - Microscopy and Microanalysis N2 - For many years pnCCDs have been well known as X-ray detectors for spectroscopic imaging in many fields of science: X-Ray Fluorescence analysis (XRF), X-ray Diffraction (XRD) with light sources in large accelerator facilities as well as with laboratory light sources or with X-rays from celestial sources in X-ray astronomy. A brief introduction in GEXRF (Grazing Emission XRF) measurements with a laboratory laser produced plasma source will be given, PIXE (Particle Induced X-ray Emission) measurements and D2XRF (Double Dispersive X-Ray Fluorescence) and Slicing experiments with pnCCDs coupled to polycapillary optics performed at the BESSY synchrotron will be shown. Energy-dispersive Laue diffraction with ultra-hard X-rays for the analysis of defects in metals will conclude the overview of spectroscopic X-ray imaging measurements in the field of structure and dynamics of matter. KW - PnCCD KW - Synchrotron KW - XRF PY - 2016 DO - https://doi.org/10.1017/S1431927616001355 VL - 22 IS - S3 SP - 100 EP - 101 AN - OPUS4-38884 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pogány, A. A1 - Balslev-Harder, D. A1 - Braban, Ch. F. A1 - Cassidy, N. A1 - Ebert, V. A1 - Ferracci, V. A1 - Hieta, T. A1 - Leuenberger, D. A1 - Martin, N. A. A1 - Pascale, C. A1 - Peltola, J. A1 - Persijn, S. A1 - Tiebe, Carlo A1 - Twigg, M. M. A1 - Vaittinen, Olavi A1 - van Wijk, J. A1 - Wirtz, K. A1 - Niederhauser, B. T1 - A metrological approach to improve accuracy and reliability of ammonia measurements in ambient air JF - Measurement Science and Technology N2 - The environmental impacts of ammonia (NH3) in ambient air have become more evident in the recent decades, leading to intensifying research in this field. A number of novel analytical techniques and monitoring instruments have been developed, and the quality and availability of reference gas mixtures used for the calibration of measuring instruments has also increased significantly. However, recent inter-comparison measurements show significant discrepancies, indicating that the majority of the newly developed devices and reference materials require further thorough validation. There is a clear need for more intensive metrological research focusing on quality assurance, intercomparability and validations. MetNH3 (Metrology for ammonia in ambient air) is a three-year project within the framework of the European Metrology Research Programme (EMRP), which aims to bring metrological traceability to ambient ammonia measurements in the 0.5–500 nmol mol−1 amount fraction range. This is addressed by working in three areas: (1) improving accuracy and stability of static and dynamic reference gas mixtures, (2) developing an optical transfer standard and (3) establishing the link between high-accuracy metrological standards and field measurements. In this article we describe the concept, aims and first results of the project. KW - Ammonia in ambient air KW - Traceability KW - Reference gas standards KW - Optical transfer standard KW - Validation and testing infrastructure PY - 2016 DO - https://doi.org/10.1088/0957-0233/27/11/115012 SN - 0957-0233 VL - 27 IS - 11 SP - 115012 EP - 115026 PB - IOP Publishing Ltd. AN - OPUS4-39130 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konnertz, Nora A1 - Ding, Yi A1 - Harrison, W.J. A1 - Budd, P.M. A1 - Schönhals, Andreas A1 - Böhning, Martin T1 - Molecular mobility and gas transport properties of nanocomposites based on PIM-1 and polyhedral oligomeric phenethyl-silsesquioxanes (POSS) JF - Journal of Membrane Science N2 - Polymers with intrinsic microporosity (PIMs) are of great interest in the field of gas separation membranes. Already the first synthesized PIM-1 shows extraordinary permeability and selectivity. Unfortunately, PIM-1 is susceptible to physical aging and thus gradually loses its outstanding properties. In this study a polyhedral oligomeric silsesquioxane with phenethyl substituents (PhenethylPOSS) was used as a nanofiller (0–40 wt%) in the PIM-1 matrix to potentially improve the gas transport properties and prevent physical aging. The molecular mobility of the solution-cast nanocomposite films was analyzed by Broadband Dielectric Spectroscopy (BDS). Furthermore, gas permeability was determined with the time lag method (0–20 bar upstream pressure) at 35 °C for N2, O2, CH4 and CO2. KW - Broadband Dielectric Spectroscopy KW - Gas separation KW - Gas permeation KW - Polymers of intrinsic microporosity KW - Nanocomposite KW - POSS KW - PIM-1 PY - 2017 DO - https://doi.org/10.1016/j.memsci.2017.02.007 SN - 0376-7388 SN - 1873-3123 VL - 529 SP - 274 EP - 285 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-39169 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Krietsch, Arne T1 - Brand- und Explosionsgefahren beim Umgang mit nanoskalig hergestellten Materialien N2 - In vielen Bereichen der Industrie und im verarbeitenden Gewerbe werden eine Vielzahl brennbarer Stäube produziert, verarbeitet, transportiert oder anderweitig verwendet. Die Partikelgröße der Stäube übt einen entscheidenden Einfluss auf deren Brand- und Explosionsverhalten aus. Mit Abnahme der Partikelgröße nehmen die gefährlichen Auswirkungen im Falle einer Explosion sowie die Zündempfindlichkeit zu. Aufgrund besonderer Eigenschaften nanoskaliger Materialien hat die Produktion solcher Stäube mit sehr geringen Primärpartikelgrößen in den letzten Jahren zugenommen. Über das Brand- und Explosionsverhalten solcher Stäube war bis vor wenigen Jahren jedoch kaum bis wenig bekannt. Untersuchungen haben gezeigt, dass nanoskalig hergestellte Stäube im Fall einer Explosion nicht grundsätzlich heftiger reagieren als die kritischsten Mikrostäube. Dennoch reagieren sogenannte Nanostäube mitunter zündempfindlicher als vergleichbare Mikrostäube; vereinzelt wurden höhere Werte für den maximalen Explosionsdruck und zeitlichen Druckanstieg für vergleichbare Stäube mit mikroskaligen Partikeln festgestellt. Für die Praxis ist daher zu beachten, dass zündempfindliche Stäube dementsprechend transportiert und gehandhabt bzw. entsprechende Schutzmaßnahmen ergriffen werden. T2 - Tagung des Sachgebietes "Explosionsschutz" der deutschen gesetzlichen Unfallversicherung CY - Heidelberg, Germany DA - 24.11.2016 KW - Nanoskalige Stäube KW - Explosionseigenschaften KW - Zündverhalten PY - 2016 AN - OPUS4-39112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nikolic, Nela A1 - Dal Co, Alma A1 - Kiviet, Daniel J. A1 - Bergmiller, Tobias A1 - Littmann, Sten A1 - Kuypers, Marcel M. M. A1 - Ackermann, Martin A1 - Schreiber, Frank T1 - Cell-to-cell variation and specialization in sugar metabolism in clonal bacterial populations JF - PLoS Genetics N2 - While we have good understanding of bacterial metabolism at the population level, we know little about the metabolic behavior of individual cells: do single cells in clonal populations sometimes specialize on different metabolic pathways? Such metabolic specialization could be driven by stochastic gene expression and could provide individual cells with growth benefits of specialization. We measured the degree of phenotypic specialization in two parallel metabolic pathways, the assimilation of glucose and arabinose. We grew Escherichia coli in chemostats, and used isotope-labeled sugars in combination with nanometer-scale secondary ion mass spectrometry and mathematical modeling to quantify sugar assimilation at the single-cell level. We found large variation in metabolic activities between single cells, both in absolute assimilation and in the degree to which individual cells specialize in the assimilation of different sugars. Analysis of transcriptional reporters indicated that this variation was at least partially based on cell-to-cell variation in gene expression. Metabolic differences between cells in clonal populations could potentially reduce metabolic incompatibilities between different pathways, and increase the rate at which parallel reactions can be performed. KW - Metabolism KW - Escherichia coli KW - Phenotypic diversity KW - Phenotypic heterogeneity PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-438873 UR - http://journals.plos.org/plosgenetics/article?id=10.1371/journal.pgen.1007122 DO - https://doi.org/10.1371/journal.pgen.1007122 SN - 1553-7404 VL - 13 IS - 12 SP - e1007122, 1 EP - e1007122, 24 PB - Public Library of Science CY - Cambridge, United Kingdom AN - OPUS4-43887 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin-Sanchez, Pedro Maria A1 - Gebhardt, Christopher A1 - Toepel, Jörg A1 - Barry, J. A1 - Munzke, N. A1 - Günster, Jens A1 - Gorbushina, Anna T1 - Monitoring microbial soiling in photovoltaic systems: A qPCR-based approach JF - International Biodeterioration & Biodegradation N2 - Soiling of photovoltaic (PV) systems compromises their performance causing a significant power loss and demanding periodical cleaning actions. This phenomenon raises great concerns in the solar energy field, thus leading to notable research efforts over the last decades. Soiling is caused by a dual action of dust deposition and biofouling. However, surprisingly, the microbiological contribution to PV soiling is often overlooked or underestimated. In this study, a variety of qPCR-based methods have been developed to quantify the microbial load of fungi, bacteria and phototrophs on PV panels. These protocols were evaluated by comparison with culturedependent methods, and were implemented with real solar plants for two years. The results show that the developed molecular methods are highly sensitive and reliable to monitor the microbial component of the soiling. Fungal biomass was clearly dominant in all analysed PV modules, while bacteria and phototrophs showed much lower abundance. Light microscopy and qPCR results revealed that melanised microcolonial fungi and phototrophs are the main biofilm-forming microorganisms on the studied solar panels. In particular, the fungal qPCR protocol is proposed as a useful tool for monitoring of PV soiling, and investigating the microbial contribution to specific soiling cases. KW - Solar panels KW - PV modules KW - Real-time qPCR KW - Bacteria KW - Fungi KW - Phototrophs PY - 2018 DO - https://doi.org/10.1016/j.ibiod.2017.12.008 SN - 0964-8305 VL - 129 SP - 13 EP - 22 PB - Elsevier Science AN - OPUS4-43892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nilsson, R. H. A1 - Taylor, A. F. S. A1 - Adams, R. I. A1 - Baschien, C. A1 - Bengtsson-Palme, J. A1 - Cangren, P. A1 - Coleine, C. A1 - Iršėnaitė, R. A1 - Martin-Sanchez, Pedro Maria A1 - Meyer, W. A1 - Oh, S.-Y. A1 - Sampaio, J. P. A1 - Seifert, K. A. A1 - Sklenář, F. A1 - Stubbe, D. A1 - Suh, S.-O. A1 - Summerbell, R. A1 - Svantesson, S. A1 - Unterseher, M. A1 - Visagie, C. M. A1 - Weiss, M. A1 - Woudenberg, J. HC. A1 - Wurzbacher, C. A1 - Van den Wyngaert, S. A1 - Yilmaz, N. A1 - Yurkov, A. A1 - Kõljalg, U. A1 - Abarenkov, K. A1 - Daniel, H.-M. A1 - Glassman, S. I. A1 - Hirooka, H. A1 - Irinyi, L. T1 - Taxonomic annotation of public fungal ITS sequences from the built environment – a report from an April 10–11, 2017 workshop (Aberdeen, UK) JF - MycoKeys N2 - Recent DNA-based studies have shown that the built environment is surprisingly rich in fungi. These indoor fungi – whether transient visitors or more persistent residents – may hold clues to the rising levels of human allergies and other medical and building-related health problems observed globally. The taxo¬nomic identity of these fungi is crucial in such pursuits. Molecular identification of the built mycobiome is no trivial undertaking, however, given the large number of unidentified, misidentified, and technically compromised fungal sequences in public sequence databases. In addition, the sequence metadata required to make informed taxonomic decisions – such as country and host/substrate of collection – are often lacking even from reference and ex-type sequences. Here we report on a taxonomic annotation workshop (April 10–11, 2017) organized at the James Hutton Institute/University of Aberdeen (UK) to facilitate reproducible studies of the built mycobiome. The 32 participants went through public fungal ITS bar¬code sequences related to the built mycobiome for taxonomic and nomenclatural correctness, technical quality, and metadata availability. A total of 19,508 changes – including 4,783 name changes, 14,121 metadata annotations, and the removal of 99 technically compromised sequences – were implemented in the UNITE database for molecular identification of fungi (https://unite.ut.ee/) and shared with a range of other databases and downstream resources. Among the genera that saw the largest number of changes were Penicillium, Talaromyces, Cladosporium, Acremonium, and Alternaria, all of them of significant importance in both culture-based and culture-independent surveys of the built environment. KW - Indoor mycobiome KW - Built environment KW - Molecular identification KW - Fungi KW - Taxonomy KW - Systematics KW - Sequence annotation KW - Metadata KW - Open data PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-438949 DO - https://doi.org/10.3897/mycokeys.28.20887 SN - 1314-4049 SN - 1314-4057 VL - 28 SP - 65 EP - 82 PB - Pensoft Publishers CY - Washington, DC AN - OPUS4-43894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas T1 - Untersuchungen zur Versalzung von Metalloberflächen im maritimen Bereich T2 - Tagungsband zur 17. Tagung "Korrosionsschutz in der maritimen Technik" N2 - Die Versalzung und Verunreinigung von Metalloberflächen durch chloridhaltige Aerosole hat eine große Bedeutung für das Korrosionsverhalten von beschichteten Metalloberflächen im maritimen Bereich und bei Offshore-Anwendungen. So ist z. B. zu klären, ob und in welchem Maße eine Versalzung der Oberfläche Einfluss auf die Haftung und Dauerhaftigkeit von Beschichtungen hat. Dafür sind Detailfragen zu klären, etwa mit welcher Versalzung nach welchem Zeitraum zu rechnen ist oder wie für systematische Untersuchungen eine definierte und reproduzierbare Versalzung im Labor nachgestellt werden kann. Der Beitrag widmet sich diesen Fragestellungen. Es werden Ergebnisse eines Feldversuches auf Helgoland gezeigt und ein einfaches Verfahren zur definierten Beladung von Metalloberflächen mit Chloriden im Labormaßstab vorgestellt. T2 - 17. Tagung "Korrosionsschutz in der maritimen Technik" CY - Hamburg, Germany DA - 24.01.2018 KW - Maritime Atmosphäre KW - Maritime atmosphere KW - Versalzung KW - Salinization PY - 2018 SN - 978-3-935406-65-9 VL - 17 SP - 87 EP - 102 AN - OPUS4-43937 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas T1 - Untersuchungen zur Versalzung von Metalloberflächen im maritimen Bereich N2 - Die Versalzung und Verunreinigung von Metalloberflächen durch chloridhaltige Aerosole hat eine große Bedeutung für das Korrosionsverhalten von beschichteten Metalloberflächen im maritimen Bereich und bei Offshore-Anwendungen. So ist z. B. zu klären, ob und in welchem Maße eine Versalzung der Oberfläche Einfluss auf die Haftung und Dauerhaftigkeit von Beschichtungen hat. Dafür sind Detailfragen zu klären, etwa mit welcher Versalzung nach welchem Zeitraum zu rechnen ist oder wie für systematische Untersuchungen eine definierte und reproduzierbare Versalzung im Labor nachgestellt werden kann. Der Beitrag widmet sich diesen Fragestellungen. Es werden Ergebnisse eines Feldversuches auf Helgoland gezeigt und ein einfaches Verfahren zur definierten Beladung von Metalloberflächen mit Chloriden im Labormaßstab vorgestellt. T2 - 17. Tagung "Korrosionsschutz in der maritimen Technik" CY - Hamburg, Germany DA - 24.01.2018 KW - Maritime Atmosphäre KW - Maritime atmosphere KW - Versalzung KW - Salinization PY - 2018 AN - OPUS4-43936 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zorn, R. A1 - Yin, Huajie A1 - Lohstroh, W. A1 - Harrison, W. A1 - Budd, P.M. A1 - Pauw, Brian Richard A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Anomalies in the low frequency vibrational density of states for a polymer with intrinsic microporosity - the Boson peak of PIM-1 JF - Physical Chemistry Chemical Physics N2 - Polymers with intrinsic microporosity are promising candidates for the active separation layer in gas separation membranes. Here, the vibrational density of states (VDOS) for PIM-1, the prototypical polymer with intrinsic microporosity, is investigated by means of inelastic neutron scattering. The results are compared to data measured for a more conventional high-performance polyimide used in gas separation membranes (Matrimid). The measured data show the characteristic low frequency excess contribution to VDOS above the Debye sound wave level, generally known as the Boson peak in glass-forming materials. In comparison to the Boson peak of Matrimid, that of PIM-1 is shifted to lower frequencies. This shift is discussed considering the microporous, sponge-like structure of PIM-1 as providing a higher compressibility at the molecular scale than for conventional polymers. For an annealed PIM-1 sample, the Boson peak shifts to higher frequencies in comparison to the un-annealed sample. These changes in the VDOS of the annealed PIM-1 sample are related to changes in the microporous structure as confirmed by X-ray scattering. KW - Polymers KW - Boson peak KW - Neutron scattering KW - Physical aging KW - Polymer of intrinsic microporosity PY - 2018 DO - https://doi.org/10.1039/C7CP07141H SN - 1463-9076 SN - 1463-9084 VL - 20 IS - 3 SP - 1355 EP - 1363 PB - The Royal Society of Chemistry AN - OPUS4-43808 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Langklotz, U. A1 - Schneider, M. T1 - Lebensdauerabschätzung von Zink- und Zinklegierungsüberzügen durch elektrochemische Untersuchungen und strukturanalytische Beschreibung der gebildeten Deckschichten N2 - Der Vortrag stellt ein neuartiges Korrosionsprüfverfahren für Zinküberzüge auf Basis gelartiger Elektrolyte vor und führt die Vorteile gegenüber konventionellen Prüfverfahren auf. Basierend auf den Ergebnissen wird die Idee für einen IGF-Projektantrag in Kooperation mit dem Fraunhofer IKTS vorgestellt. T2 - Arbeitskreissitzung der GfKORR, AK "Zink und Zinküberzüge" CY - Iserlohn, Germany DA - 25.04.2018 KW - Deckschichtbildung KW - Layer formation KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Korrosionsprüfung KW - Corrosion testing KW - Zinkdeckschichten KW - Zinc coatings PY - 2018 AN - OPUS4-44811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Nehrig, Marko A1 - Erenberg, Marina A1 - Feldkamp, Martin A1 - Bletzer, Claus A1 - Musolff, André A1 - Wille, Frank T1 - Large Scale IAEA Thermal Test with Wood filled Impact Limiters T2 - WM 2018 Symposia (Proceedings) N2 - Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood. Mostly this wood is encapsulated by steel sheets. The impact limiters are needed to ensure that the transport casks meet the IAEA safety requirements. According to the IAEA safety requirements a package has to withstand consecutively severe mechanical tests followed by a thermal test. The mechanical tests have to produce maximum damage concerning the thermal test. Following this, the impact limiters may have serious pre-damage when the thermal tests begins. The IAEA safety requirements state that during and following the fire test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally. Small scale fire tests with wood filled metal drums by BAM and works of the French Institute for Radiological Protection and Nuclear Safety (IRSN) showed that pre-damaged steel encapsulated wooden structures could start smoldering initiated by the thermal test. These processes supply additional energy to the cask which should be considered within the safety assessment of the package. As not much is known about smoldering processes in encapsulated wooden structures with a reduced oxygen supply the need for a test was identified. To investigate the influence of a smoldering impact limiter concerning the amount of energy supplied to the cask in dependence of the time BAM conducted a large scale impact limiter thermal test. For that, a pre-damaged impact limiter with a diameter of 2,3 m was mounted on a water tank simulating a cask. A complex system of a regulated pump, a heater, a cooler, a slide valve, a flow meter and numerous thermocouples were installed and connected to a control unit to ensure all needed operating conditions. After a pre-heating compared to typical SNF decay-heat, the 30 min lasting fire phase of the thermal test was started. After that, the expected and initiated smoldering began. The results of the large scale test are presented in this poster. Systematic small scale tests will follow to identify the influence of different parameters, e.g. moisture content and scale effects. The tests took place at BAM Test Site for Technical Safety (TTS) with its various possibilities for mechanical and thermal tests. The results of these tests will have direct influence in the safety assessment of transport cask for the transport of radioactive material T2 - 2018 WM Symposia CY - Phoenix, AZ, USA DA - 18.03.2018 KW - Type-B Package KW - Thermal Test PY - 2018 SP - Paper 18257, 1 EP - 11 AN - OPUS4-45311 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - C., Ruibal A1 - L., Selbmann A1 - Serap, Avci A1 - Martin-Sanchez, Pedro Maria A1 - Gorbushina, Anna ED - Gorbushina, Anna T1 - Roof-Inhabiting Cousins of Rock-Inhabiting Fungi: Novel Melanized Microcolonial Fungal Species from Photocatalytically Reactive Subaerial Surfaces JF - Life N2 - Subaerial biofilms (SAB) are an important factor in weathering, biofouling, and biodeterioration of bare rocks, building materials, and solar panel surfaces. The realm of SAB is continually widened by modern materials, and the settlers on these exposed solid surfaces always include melanized, stress-tolerant microcolonial ascomycetes. After their first discovery on desert rock surfaces, these melanized chaetothyrialean and dothidealean ascomycetes have been found on Mediterranean monuments after biocidal treatments, Antarctic rocks and solar panels. New man-made modifications of surfaces (e.g., treatment with biocides or photocatalytically active layers) accommodate the exceptional stress-tolerance of microcolonial fungi and thus further select for this well-protected ecological group. Melanized fungal strains were isolated from a microbial community that developed on highly photocatalytic roof tiles after a long-term environmental exposure in a maritime-influenced region in northwestern Germany. Four of the isolated strains are described here as a novel species, Constantinomyces oldenburgensis, based on multilocus ITS, LSU, RPB2 gene phylogeny. Their closest relative is a still-unnamed rock-inhabiting strain TRN431, here described as C. patonensis. Both species cluster in Capnodiales, among typical melanized microcolonial rock fungi from different stress habitats, including Antarctica. These novel strains flourish in hostile conditions of highly oxidizing material surfaces, and shall be used in reference procedures in material testing. KW - Microcolonial fungi KW - Multilocus phylogeny KW - Photocatalytic surfaces KW - Subaerial biofilms KW - Stress tolerance KW - Constantinomyces PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-455182 DO - https://doi.org/10.3390/life8030030 VL - 8 IS - 3 SP - 30 EP - 44 PB - MDPI CY - Basel, Schweiz AN - OPUS4-45518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Corrosion investigations on zinc coatings by using gel-type electrolytes N2 - A new approach to the assessment of the corrosion behaviour of zinc coatings under atmospheric conditions can be achieved using gel-type electrolytes as an alternative to standard aqueous test electrolytes. Gel-type electrolytes allow minimally invasive corrosion investigations on zinc coatings. They also provide the possibility to carry out corrosion investigations onsite. By using gel-type electrolytes corrosion-relevant characteristic values such as corrosion currents and polarization resistanc-es can be determined. These allow to describe the formation and the stability of the formed corrosion product layers under various climatic conditions. With this knowledge, a prediction of the zinc coating life cycle is possible. In this contribution, the value of gel-type electrolytes for corrosion research on zinc coatings is presented. T2 - Intergalva 2018 CY - Berlin, Germany DA - 17.06.2018 KW - Deckschichtbildung KW - Layer formation KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Korrosionsprüfung KW - Corrosion testing KW - Zinkdeckschichten KW - Zinc coatings PY - 2018 AN - OPUS4-45244 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Corrosion investigations on zinc coatings by using gel-type electrolytes T2 - Intergalva 2018 - 25th International Galvanizing Conference - Conference Papers N2 - A new approach to the assessment of the corrosion behaviour of zinc coatings under atmospheric conditions can be achieved using gel-type electrolytes as an alternative to standard aqueous test electrolytes. Gel-type electrolytes allow minimally invasive corrosion investigations on zinc coatings. They also provide the possibility to carry out corrosion investigations onsite. By using gel-type electrolytes corrosion-relevant characteristic values such as corrosion currents and polarization resistances can be determined. These allow to describe the formation and the stability of the formed corrosion product layers under various climatic conditions. With this knowledge, a prediction of the zinc coating life cycle is possible. In this contribution, the value of gel-type electrolytes for corrosion research on zinc coatings is presented. T2 - Intergalva 2018 CY - Berlin, Germany DA - 17.06.2018 KW - Deckschichtbildung KW - Layer formation KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Korrosionsprüfung KW - Corrosion testing KW - Zinkdeckschichten KW - Zinc coatings PY - 2018 SP - 385 EP - 392 AN - OPUS4-45245 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Brandes, E. A1 - Frost, K. A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit -Methodenvalidierung N2 - Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. Die Bundesanstalt für Materialforschung und –prüfung (BAM) unterstützt deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS). Bei allen bisher untersuchten Prüfmethoden besteht ein Verbesserungsbedarf. Die RV müssen daher zunächst auf die Methodenentwicklung, -verbesserung und -validierung und auf die Bestimmung der Messunsicherheit der jeweiligen Prüfmethode abzielen und nicht auf Leistungstests. T2 - Behörden-Erfahungsaustausch CY - Berlin, Germany DA - 4. Juni 2018 KW - Prüfmethode KW - Methodenvalidierung KW - Gefahrgut KW - Gefahrstoff KW - Qualitätssicherung PY - 2018 AN - OPUS4-45297 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yin, Huajie A1 - Chua, Y. Z. A1 - Yang, B. A1 - Schick, C. A1 - Harrison, W. A1 - Budd, P. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - First clear cut experimental evidence for a glass transition in a polymer with intrinsic microporosity: PIM-1 JF - Journal Physical Chemistry Letters N2 - Polymers with intrinsic microporosity (PIMs) represent a novel, innovative class of materials with great potential in various applications from high-performance gas separation membranes to electronic devices. Here for the first time, for PIM-1, as the archetypal PIM, fast scanning calorimetry provides definitive evidence for a glass transition (Tg=715 K, heating rate 3·10^4 K/s) by decoupling the time-scales responsible for glass transition and decomposition. As the rigid molecular structure of PIM-1 prevents any conformational changes, small-scale bend and flex fluctuations must be considered the origin of its glass transition. This result has strong implications for the fundamental understanding of the glass transition and for the physical aging of PIMs and other complex polymers, both topical problems of materials science. KW - Polymers with intrinsic microporosity KW - Fast Scanning Calorimetry PY - 2018 DO - https://doi.org/10.1021/acs.jpclett.8b00422 SN - 1948-7185 VL - 9 IS - 8 SP - 2003 EP - 2008 PB - ACS AN - OPUS4-44683 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Erenberg, Marina A1 - Bletzer, Claus A1 - Musolff, André A1 - Nehrig, Marko A1 - Wille, Frank T1 - Experimental investigations of the burning behavior of transport package impact limiters and of fire spread impact onto the cask N2 - Accident safe packages for the transport of spent nuclear fuel and high-level waste shall fulfil international IAEA safety requirements. Compliance is shown by consecutive mechanical and thermal testing. Additional numerical analysis are usually part of the safety evaluation. For damage protection some package designs are equipped with wood filled impact limiters encapsulated by steel sheets. The safety of these packages is established in compliance with IAEA regulations. Cumulative mechanical and fire tests are conducted to achieve safety standards and to prevent loss of containment. Mechanical reliability is proven by drop tests. Drop testing might cause significant damage of the impact limiter steel sheets and might enable sufficient oxygen supply to the impact limiter during the fire test to ignite the wood filling. The boundary conditions of the fire test are precisely described in the IAEA regulatory. During the test the impact limiter will be subjected to a 30 minute enduring fire phase. Subsequent to the fire phase any burning of the specimen has to extinguish naturally and no artificial cooling is allowed. At BAM a large-scale fire test with a real size impact limiter and a wood volume of about 3m³ was conducted to investigate the burning behaviour of wood filled impact limiters in steel sheet encapsulation. The impact limiter was equipped with extensive temperature monitoring equipment. Until today burning of such impact limiters is not sufficiently considered in transport package design and more investigation is necessary to explore the consequences of the impacting fire. The objective of the large scale test was to find out whether a self-sustaining smouldering or even a flaming fire inside the impact limiter was initiated and what impact on the cask is resulting. The amount of energy, transferred from the impact limiter into the cask is of particular importance for the safety of heavy weight packages. With the intention of heat flux quantification a new approach was made and a test bench was designed. T2 - PVP2018 - Pressure, Vessels and Piping Conference 2018 CY - Prague, Czech Republic DA - 15.07.2018 KW - Smouldering KW - Impact limiter KW - Burning KW - Wood KW - Shock absorber KW - Fire testing KW - IAEA KW - Radioactive material KW - Large-scale fire test KW - Combustion PY - 2018 AN - OPUS4-45594 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Krause, Martin A1 - Schubert, Marcus A1 - Mayer, K. A1 - Ibrahim, M. ED - Fraunhofer-Informationszentrum Raum und Bau, T1 - Sicherstellung der Ausführungsqualität an Neu- und Bestandsbauten aus Beton durch innovative zerstörungsfreie Prüfung T2 - Forschungsinitiative ZukunftBau N2 - Der Fachbereich 8.2 der Bundesanstalt für Materialforschung und -prüfung (BAM) hat eine innovative Methode zur zerstörungsfreien Ultraschallprüfung erarbeitet und den technischen Aufbau in Form eines neuen Gerätes entwickelt. Mit Hilfe des Produktdesigns soll die Etablierung auf dem Markt sichergestellt werden. Die Arbeit erläutert detailliert die Bereiche, die für die Gestaltung des Handscangerätes von Bedeutung sind. Sie befasst sich mit der Installation und Handhabung des Systems am Einsatzort und beleuchtet wichtige technische Details. Der nicht verkleidete technische Aufbau der zwei neu entwickelten Geräte dient als Grundlage für die Erarbeitung eines Gehäusekonzepts. Neben dem Gehäusedesign wird eine Überarbeitung des gesamten Aufbaus durchgeführt, um die Benutzerfreundlichkeit in verschiedenen Punkten zu verbessern. Zukünftige Designentscheidungen werden auf Grundlage von praxisnahen Beobachtungen und der notwendigen Anordnung der technischen Komponenten getroffen. Ziel der Auseinandersetzung ist es, ein funktionelles und ästhetisch ansprechendes Design zu entwickeln. Am Ende sollen unter Beachtung aller Vorgaben die Ergebnisse dieser Arbeit zu einem ergonomischen Gerät führen. Die Problemstellung besteht daraus, den komplexen technischen Vorgaben und Ansprüchen des Projektpartners und Innovationsgebers gerecht zu werden und gleichzeitig ein gutes Designziel zu erreichen. Das Design soll die Funktionalität und Handhabung des Gerätes verbessern und dient als Hilfsmittel, um den komplexen Aufbau zu vereinfachen. Die Benutzerfreundlichkeit soll an allen nötigen Stellen verbessert werden und ein ästhetisch zusammenstehender Gesamteindruck soll entstehen, ohne die Funktionalität negativ zu beeinflussen. KW - Beton KW - Qualitätssicherung KW - Zerstörungsfreie Prüfung KW - Ultraschall-Echo PY - 2018 UR - https://www.baufachinformation.de/sicherstellung-der-ausfuehrungsqualitaet-an-neu-und-bestandsbauten-aus-beton-durch-innovative-zerstoerungsfreie-pruefung/buecher/248990 SN - 978-3-7388-0101-9 VL - 2018 SP - 1 EP - 112 PB - Fraunhofer IRB Verlag CY - Stuttgart AN - OPUS4-45163 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Eisenacher, Germar A1 - Schönfelder, Thorsten A1 - Wille, Frank T1 - Finite element simulation of the crush of package components made of encapsulated wood T2 - 11th International Conference on the Transport, Storage and Disposal of Radioactive Materials N2 - Typical transport packages used in Germany are equipped with encapsulated wooden impact limiting devices. We would like to present the current status regarding the development of a Finite Element (FE) material model for the crush of wood for the FE-code LS-DYNA. The crush of is a phenomenon governed by macroscopic fracture. Here, we would like to reproduce fracture and failure mechanisms over the continuous volume. In a first step we altered an existing LS-DYNA material model for foams, which considers an ellipse shaped yield surface. For the use for longitudinal compression of wood, we modified the existing material model to consider the deviatoric strain for the evolution of the yield surface as well. This is in accordance with the results of crush tests with spruce wood specimens, where the crushing deformation was rather deviatoric for uniaxial stress states and rather volumetric for multiaxial stress states We rate the basic idea of this approach to be reasonable, though other problems exist regarding the shape of the yield surface and the assumption of isotropic material properties. Therefore we developed a new transversal isotropic material model with two main directions, which considers different yield curves according to the multiaxiality of the stress state via a multi-surface yield criterion and a non-associated flow rule. The results show the ability to reproduce the basic strength characteristics of spruce wood. Nevertheless, problems with regularization etc. show that additional investigations are necessary. T2 - 11th International Conference on the Transport, Storage and Disposal of Radioactive Materials CY - London, UK DA - 15.05.2018 KW - Wood KW - FEM PY - 2018 SP - Paper 18517, 1 EP - 12 AN - OPUS4-45091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Eisenacher, Germar A1 - Schönfelder, Thorsten A1 - Wille, Frank T1 - Finite element simulation of the crush of package components made of encapsulated wood N2 - Typical transport packages used in Germany are equipped with encapsulated wooden impact limiting devices. We would like to present the current status regarding the development of a Finite Element (FE) material model for the crush of wood for the FE-code LS-DYNA. The crush of is a phenomenon governed by macroscopic fracture. Here, we would like to reproduce fracture and failure mechanisms over the continuous volume. In a first step we altered an existing LS-DYNA material model for foams, which considers an ellipse shaped yield surface. For the use for longitudinal compression of wood, we modified the existing material model to consider the deviatoric strain for the evolution of the yield surface as well. This is in accordance with the results of crush tests with spruce wood specimens, where the crushing deformation was rather deviatoric for uniaxial stress states and rather volumetric for multiaxial stress states We rate the basic idea of this approach to be reasonable, though other problems exist regarding the shape of the yield surface and the assumption of isotropic material properties. Therefore we developed a new transversal isotropic material model with two main directions, which considers different yield curves according to the multiaxiality of the stress state via a multi-surface yield criterion and a non-associated flow rule. The results show the ability to reproduce the basic strength characteristics of spruce wood. Nevertheless, problems with regularization etc. show that additional investigations are necessary. T2 - 11th International Conference on the Transport, Storage and Disposal of Radioactive Materials CY - London, UK DA - 15.05.2018 KW - Wood KW - FEM PY - 2018 AN - OPUS4-45093 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Komann, Steffen A1 - Gröke, Carsten A1 - Wille, Frank T1 - Assessment of Quality Management for Transport Packages not requiring Authority Design Approval N2 - The poster presents the german approach for the assessment of quality management systems for transport packages for radioactive material not requiring authority design approval. As legal basis the IAEA regulations, the ADR as well as the GGVSEB are highlighted and examples for these transport packages are given. The GGR 016 is mentioned, main duties and responsibilities as well as the manufacturing and quality surveillance system are described. T2 - 11th International Conference on the Transport, Storage and Disposal of Radioactive Materials CY - London, UK DA - 15.05.2018 KW - Quality KW - Type A KW - Competent authority PY - 2018 AN - OPUS4-45095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Erdt, René A1 - Gödde, M. A1 - Salg, St. A1 - Ittemann, L. T1 - Selbstentzündungsverhalten von Feststoffen: Validierung der Extrapolation von Labortests mithilfe halbtechnischer Versuche bis 1 m3 T2 - PTB Mitteilungen N2 - Vorgestellt wird ein 2018 gestartetes Projekt zur Überprüfung der Extrapolation von im Labormaßstab ermittelten Selbstentzündungstemperaturen auf technisch relevante Volumina. Für die Ermittlung reaktionskinetischer Daten von Feststoffschüttungen stehen eine Reihe von Untersuchungsmethoden zur Verfügung. Dies sind thermische Analysen wie z. B. die differential scanning calorimetry DSC sowie Mikrokalorimetrie zur hochgenauen Messung von Wärmeströmen, bei denen sehr geringe Probenmengen zum Einsatz kommen. In der Regel wird das Selbstentzündungsverhalten jedoch mithilfe von isoperibolen oder adiabaten Warmlagerungsversuchen beurteilt, hier liegen die Probenvolumina üblicherweise im Bereich von ca. 100 cm3 bis zu einigen Litern. Die Extrapolation über mehrere Größenordnungen auf technische Volumina birgt Unsicherheiten, da mit Zunahme des Lagervolumens veränderte Start- und Randbedingungen vorliegen können. Zudem besteht die Möglichkeit, dass bei in technischen Lagern vorherrschenden niedrigen Temperaturen Reaktionen ablaufen, die in Standard- Laborversuchen nicht erfasst werden, aber einen wesentlichen Einfluss auf das Selbstentzündungsverhalten aufweisen können. Hauptziel des Projektes ist es daher, die im Labormaßstab vorhandenen Prüfeinrichtungen durch einen Versuchsstand zur Untersuchung von Probengrößen von bis zu 1000 dm3 zu erweitern, die Eignung (oder Nichteignung) der etablierten Methoden nachzuweisen und im Labormaßstab nicht erfassbare Einflussgrößen zu ermitteln. Zudem sollen anhand der kleinskaligen Tests Entscheidungskriterien abgeleitet werden, ob eine Extrapolation nach den derzeit üblichen Methoden zulässig ist. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Brunswick, Germany DA - 21.05.2019 KW - Selbstentzündung KW - Formalkinetische Daten KW - Halbtechnische Versuche KW - Thermoanalytische Methoden PY - 2020 SN - 0030-834X VL - 130 IS - 1 SP - 9 EP - 18 AN - OPUS4-51285 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Yin, Huajie A1 - Schönhals, Andreas T1 - Characterization of high-performance membrane polymers for gas separation using broadband dielectric spectroscopy N2 - In recent years superglassy polymers exhibiting intrinsic microporosity established a new perspective for a number of applications, especially for gas separation membranes as These polymers Combine extremely high permeabilities with attractive selectivities. The essential factor governing the structure Formation in the solid film or layer is either a contorted rigid Backbone (polymers of intrinsic microporosity - PIMs) or extremely bulky side groups (polynorbornenes and polytricyclonenenes). For a deeper understanding of both types of such high-Performance polymers for gas separation membranes and their further development broadband dielectric spectroscopy (BDS) can provide a substantial contribution. BDS addresses molecular relaxations characterizing the dynamics of the solid polymer as a major factor determining the gas transport properties but also the physical aging behavior which is an essential issue for such polymers. BDS is applied on PIMs where fluctuations of molecular dipoles connected to the backbone can be directly monitored. Furthermore, also polynorbornenes were investigated which carry no dipole moment in their repeat unit - the high resolution of modern equipment allows for the detailed analysis also for very small dielectric losses originating from partially oxidized moieties or marginal catalyst residues. Additionally, from interfacial polarization phenomena, such as Maxwell-Wagner-Sillars (MWS) polarization due to blocking of charge carriers at internal interfacial boundaries on a mesoscopic length scale, valuable information on the intrinsic microporosity and its changes induced by physical aging can be obtained. Finally, also conductivity can be characterized in detail in such polymeric systems revealing contributions of interactions of aromatic moieties (π-π-stacking) or the drift motion of charge carriers. These features also determine the structure formation in the solid state. T2 - 257th ACS National Meeting - Symposium "Transport in Polymer Membranes" CY - Orlando, FL, USA DA - 31.03.2019 KW - polymers KW - gas separation membranes KW - polynorbornenes KW - polymers of intrinsic microporosity KW - dielectric spectroscopy KW - molecular mobility PY - 2019 AN - OPUS4-48142 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erdmann, Maren A1 - Kupsch, Andreas A1 - Müller, Bernd R. A1 - Hentschel, Manfred P. A1 - Niebergall, Ute A1 - Böhning, Martin A1 - Bruno, Giovanni ED - Erdmann, Maren T1 - Diesel-induced transparency of plastically deformed high-density polyethylene JF - Journal of Materials Science N2 - High-density polyethylene becomes optically transparent during tensile drawing when previously saturated with diesel fuel. This unusual phenomenon is investigated as it might allow conclusions with respect to the material behavior. Microscopy, differential scanning calorimetry, density measurements are applied together with two scanning X-ray scattering techniques: wide angle X-ray scattering (WAXS) and X-ray refraction, able to extract the spatially resolved crystal orientation and internal surface, respectively. The sorbed diesel softens the material and significantly alters the yielding characteristics. Although the crystallinity among stretched regions is similar, a virgin reference sample exhibits strain whitening during stretching, while the diesel-saturated sample becomes transparent. The WAXS results reveal a pronounced fiber texture in the tensile direction in the stretched region and an isotropic orientation in the unstretched region. This texture implies the formation of fibrils in the stretched region, while spherulites remain intact in the unstretched parts of the specimens. X-ray refraction reveals a preferred orientation of internal surfaces along the tensile direction in the stretched region of virgin samples, while the sample stretched in the diesel-saturated state shows no internal surfaces at all. Besides from stretching saturated samples, optical transparency is also obtained from sorbing samples in diesel after stretching. KW - PE-HD Sorption KW - Cavitation KW - Diesel Fuel KW - X-ray refraction KW - WAXS KW - Internal Surfaces KW - Crystal Texture PY - 2019 DO - https://doi.org/10.1007/s10853-019-03700-8 SN - 1573-4803 SN - 0022-2461 VL - 54 IS - 17 SP - 11739 EP - 11755 PB - Springer US CY - US AN - OPUS4-48226 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Langklotz, U. A1 - Schneider, M. T1 - Beschreibung der Deckschichtbildung bei Zink und Zinklegierungen mittels minimalinvasiver Korrosionsuntersuchungen und analytischer Methoden (MINIMAL) N2 - Der Vortrag stellt ein neuartiges Korrosionsprüfverfahren für Zinküberzüge auf Basis gelartiger Elektrolyte vor und führt die Vorteile gegenüber konventionellen Prüfverfahren auf. Basierend auf den Ergebnissen wird die Idee für einen IGF-Projektantrag in Kooperation mit dem Fraunhofer IKTS vorgestellt. T2 - Sitzung des GAV-Forschungsbeirates CY - Iserlohn, Germany DA - 18.09.2019 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosionsprüfung KW - Zinkdeckschichten KW - Corrosion testing KW - Gel-type electrolytes KW - Layer formation KW - Zinc coatings PY - 2019 AN - OPUS4-49036 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Wille, Frank A1 - Kuschke, Christian A1 - Schubert, Sven A1 - Schilling, Olaf A1 - Günther, Uve A1 - Darnstädt, Andreas T1 - Requirements for management systems for manufacturing of transport packages: the new revision of BAM-GGR 011 guideline N2 - In accordance with IAEA SSR-6 para 306 a management system shall be established and implemented to ensure compliance with the relevant provisions of the IAEA regulations. BAM has issued an update of the guideline: the BAM-GGR 011. The new revision describes necessary quality assurance measures for design, manufacture, testing, documentation, use, maintenance and inspection of packagings for package designs requiring competent authority approval for the transport of radioactive material. The measures can be categorised as system-related and design-related. They are independently approved and monitored by the German competent authority BAM and its authorised expert (BAM/T). The qualification of the organisation applying for the design approval certificate is reviewed in the context of the design approval procedure. The quality assurance measures for manufacture consist of three main steps. Pre-assessment of manufacturing documents such as quality plans, specifications etc., Manufacturing inspections according the pre-assessed documents and inspection before commissioning including documentation review. Periodic inspections during operation as well as relevant specifications for use and maintenance ensure that the properties specified in the approval certificate are preserved over the package life time. Special provisions for the return on experience regarding operational feedback for design, manufacture, use, maintenance and inspection are given. Special focus shall be given here to the rearranged and meanwhile established system of manufacturing inspections. This includes more transparent roles for a) the producers authorised inspection 11282 representative, b) the independent inspection expert (S), acting on behalf of the manufacturer with acceptance of BAM, and c) BAM or its authorised expert (BAM/T). Additional attention shall be drawn to the management of deviations during manufacturing and provisions for maintenance and periodic inspections. T2 - 19th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019 CY - New Orleans, LA, USA DA - 04.08.2019 KW - Quality assurance KW - Transport KW - Manufacturing KW - Surveillance KW - Radioactive material PY - 2019 AN - OPUS4-49056 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Schilling, O. A1 - Kuschke, Christian A1 - Darnstädt, A. A1 - Schubert, Sven A1 - Günther, U. A1 - Wille, Frank T1 - Requirements for management systems for manufacturing of transport packages: the new revision of BAM-GGR 011 guideline T2 - Proceedings of the 19th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019 N2 - In accordance with IAEA SSR-6 para 306 a management system shall be established and implemented to ensure compliance with the relevant provisions of the IAEA regulations. BAM has issued an update of the guideline: the BAM-GGR 011. The new revision describes necessary quality assurance measures for design, manufacture, testing, documentation, use, maintenance and inspection of packagings for package designs requiring competent authority approval for the transport of radioactive material. The measures can be categorised as system-related and design-related. They are independently approved and monitored by the German competent authority BAM and its authorised expert (BAM/T). The qualification of the organisation applying for the design approval certificate is reviewed in the context of the design approval procedure. The quality assurance measures for manufacture consist of three main steps. Pre-assessment of manufacturing documents such as quality plans, specifications etc., Manufacturing inspections according the pre-assessed documents and inspection before commissioning including documentation review. Periodic inspections during operation as well as relevant specifications for use and maintenance ensure that the properties specified in the approval certificate are preserved over the package life time. Special provisions for the return on experience regarding operational feedback for design, manufacture, use, maintenance and inspection are given. Special focus shall be given here to the rearranged and meanwhile established system of manufacturing inspections. This includes more transparent roles for a) the Producers authorised inspection 11282 representative, b) the independent inspection expert (S), acting on behalf of the manufacturer with acceptance of BAM, and c) BAM or its authorised expert (BAM/T). Additional attention shall be drawn to the management of deviations during manufacturing and provisions for maintenance and periodic inspections. T2 - 19th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019 CY - New Orleans, LA, USA DA - 04.08.2019 KW - Quality assurance KW - Transport KW - Manufacturing KW - Surveillance KW - Radioactive material PY - 2019 SP - Paper 1128, 1 AN - OPUS4-49059 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zorn, R. A1 - Lohstroh, W. A1 - Zamponi, M. A1 - Harrison, W. A1 - Budd, P. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Molecular mobility of a polymer of intrinsic microporosity revealed by quasielastic neutron scattering JF - Macromolecules N2 - Quasielastic neutron scattering by employing a combination of time-of-flight and backscattering techniques is carried out to explore the molecular mobility of a polymer of intrinsic microporosity (PIM-1) at microscopic time scales in comparison with a high-performance polyimide. Molecular fluctuations can change the structure of the temporary network of micropores and open or close pathways for gas molecules. Therefore, the investigation might help to understand the selectivity of PIMs in gas separation processes. The performed neutron scattering experiments provide evidence for a low-temperature relaxation process, which was assigned to methyl group rotation. This methyl group rotation was analyzed in terms of jump diffusion in a three-fold potential. The analysis results in a fraction of methyl groups which are immobilized. For PIM-1 it was found that the fraction of immobilized methyl groups decreases with increasing temperature up to 350 K. At higher temperatures the number of immobilized methyl group increases gain due to an underlying relaxation process. This motional process on a somewhat larger length scale might lead to a reversible structural rearrangement which partially hinders the strongly localized methyl group rotation. In addition, it was found that the activation energy for the methyl group rotation for PIM-1 and the polyimide is significantly higher than for conventional polymers. KW - Polymer of intrinsic microporosity KW - Quasielastic neutron scattering PY - 2020 DO - https://doi.org/10.1021/acs.macromol.0c00963 SN - 0024-9297 SN - 1520-5835 VL - 53 IS - 15 SP - 6731 EP - 6739 PB - American Chemical Society CY - Washington, DC AN - OPUS4-51147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zorn, R. A1 - Szymoniak, Paulina A1 - Kolmangadi, Mohamed Aejaz A1 - Wolf, M. A1 - Alentiev, D. A1 - Bermeshev, M. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Low frequency vibrational density of state of highly permeable super glassy polynorbornenes – The Boson peak JF - Physical Chemistry Chemical Physics N2 - Inelastic incoherent neutron time-of flight scattering was employed to measure the low frequency density of states for a series of addition polynorbornenes with bulky side groups. The rigid main chain in combination with the bulky side groups give rise to a microporosity of these polymers in the solid state. The microporosity characterized by the BET surfaces area varies systematically in the considered series. Such materials have some possible application as active separation layer in gas separation membranes. All investigated materials show excess contributions to the Debye type density of states characteristic for glasses known as Boson peak. The maximum position of the Boson peak shifts to lower frequency values with increasing microporosity. Data for PIM-1 and Matrimid included for comparison are in good agreement to this dependency. This result supports the sound wave interpretation of the Boson peak. KW - Polynorbornes KW - Neutron Scattering PY - 2020 DO - https://doi.org/10.1039/d0cp03360j SN - 1463-9076 VL - 22 IS - 33 SP - 18381 EP - 18387 PB - Royal Chemical Society AN - OPUS4-51165 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Outcomes of three large scale fire reference tests conducted in BAM fire test facility T2 - Pressure Vessels & Piping Conference 2020 N2 - Packages for the transport of high-level radioactive material are designed to withstand severe accidents. Hypothetical severe accident conditions are defined in the IAEA Regulations for the Safe Transport of Radioactive Materials. One of these accident conditions is the thermal test, mainly consisting of a 30 minute fully engulfing 800°C pool fire or an equally severe fire test. The heat fluxes into the package depend substantially on the fire characteristics and the Surface temperature of the package. Fire tests can be performed at BAM on a propane gas fire test facility. In order to investigate the heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for multiple use. The package represented the outer geometry of a specific transport cask for radioactive waste. The fire reference package is a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 1500 mm and a diameter of 1050 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Three open-air fire tests were performed in the BAM propane gas fire test facility. The flames exposure time period varied slightly for the fire tests. The wind direction as well as the wind Speed were measured and changed between and during the tests. Test stand parameters such as wind shield location and propane gas volume flow were chosen constant for the three tests. The locally measured fire reference package steel sheet temperatures were used for the calculation of heat fluxes as function of time and surface temperature. The measured temperatures allowed further calculations. In a first approach effective fire characteristics of the propane gas fire, including the flame temperature, the fire convection coefficient and a Radiation exchange coefficient mathematically describing the determined average heat flux over the surface temperature were calculated. T2 - Pressure Vessels & Piping Conference 2020 CY - Online meeting DA - 03.08.2020 KW - Fire KW - Testing KW - Large scale testing KW - Calorimeter KW - Heat flux PY - 2020 SP - 1 EP - 9 PB - ASME CY - New York AN - OPUS4-51192 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Outcomes of three large scale fire reference tests conducted in BAM fire test facility N2 - Packages for the transport of high-level radioactive material are designed to withstand severe accidents. Hypothetical severe accident conditions are defined in the IAEA Regulations for the Safe Transport of Radioactive Materials. One of these accident conditions is the thermal test, mainly consisting of a 30 minute fully engulfing 800°C pool fire or an equally severe fire test. The heat fluxes into the package depend substantially on the fire characteristics and the Surface temperature of the package. Fire tests can be performed at BAM on a propane gas fire test facility. In order to investigate the heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for multiple use. The package represented the outer geometry of a specific transport cask for radioactive waste. The fire reference package is a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 1500 mm and a diameter of 1050 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Three open-air fire tests were performed in the BAM propane gas fire test facility. The flames exposure time period varied slightly for the fire tests. The wind direction as well as the wind Speed were measured and changed between and during the tests. Test stand parameters such as wind shield location and propane gas volume flow were chosen constant for the three tests. The locally measured fire reference package steel sheet temperatures were used for the calculation of heat fluxes as function of time and surface temperature. The measured temperatures allowed further calculations. In a first approach effective fire characteristics of the propane gas fire, including the flame temperature, the fire convection coefficient and a Radiation exchange coefficient mathematically describing the determined average heat flux over the surface temperature were calculated. T2 - Pressure Vessels & Piping Virtual Conference 2020 CY - Online meeting DA - 03.08.2020 KW - Fire KW - Testing KW - Convection coefficient KW - Large scale fire testing KW - Propane gas fire test facility PY - 2020 AN - OPUS4-51194 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kolmangadi, Mohamed Aejaz A1 - Szymoniak, Paulina A1 - Smales, Glen Jacob A1 - Alentiev, D. A1 - Bermeshev, M. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Molecular Dynamics of Janus Polynorbornenes: Glass Transitions and Nanophase Separation JF - Macromolecules N2 - For the first time, dielectric and calorimetric investigations of an homologous series of Janus polynorbornenes with rigid main backbones and flexible -Si(OR)3 side groups, of differing length alkyl chains (R = Propyl, Butyl, Hexyl, Octyl, Decyl) is reported. Generally, this class of polymers has some potential for applications in the field of gas separation membranes. Two dielectrically active processes are observed at low temperatures, denoted as β- and α- relaxation. The former can be assigned to localized fluctuations, whilst the latter is related to the glassy dynamics of the flexible -Si(OR)3 side groups, creating a nanophase separation in both the alkyl chain rich and backbone rich domains. This is confirmed through temperature modulated DSC measurements and X-ray scattering experiments. The glass transition temperatures of the backbone rich domains, which are beyond or near to their degradation temperatures in terms of conventional DSC, are determined for the first time using Fast Scanning Calorimetry employing both fast heating and cooling rates. This is complimented with scattering experiments that show how the size of the alkyl chain rich domains increases with chain length. Alongside these results, a significant conductivity contribution was observed for all poly(tricyclononenes) with -Si(OR)3 side groups, which is interpreted in terms of a percolation model. KW - Polynorbornenes KW - Broadband Dielectric Spectrscopy KW - Advanced calorimetry PY - 2020 DO - https://doi.org/10.1021/acs.macromol.0c01450 VL - 53 IS - 17 SP - 7410 EP - 7419 PB - ACS AN - OPUS4-51196 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reifschneider, O. A1 - Vennemann, A. A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Hogeback, J A1 - Köppen, C. A1 - Großgarten, M. A1 - Sperling, M. A1 - Wiemann, M. A1 - Karst, U. T1 - Revealing Silver Nanoparticle Uptake by Macrophages Using SR-μXRF and LA-ICP-MS JF - Chemical Research in Toxicology N2 - To better study the impact of nanoparticles on both in vitro and in vivo models, tissue distribution and cellular doses need to be described more closely. Here silver nanoparticles were visualized in alveolar macrophages by means of synchrotron radiation micro X-ray fluorescence spectroscopy (SR-μXRF) with high spatial resolution of 3 × 3 μm2. For the spatial allocation of silver signals to cells and tissue structures, additional elemental labeling was carried out by staining with eosin, which binds to protein and can be detected as bromine signal with SR-μXRF. The method was compatible with immunostaining of macrophage antigens. We found that the silver distribution obtained with SR-μXRF was largely congruent with distribution maps from a subsequent laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) of the same tissue sites. The study shows a predominant, though not exclusive uptake of silver into alveolar macrophages in the rat lung, which can be modeled by a similar uptake in cultured alveolar macrophages. Advantages and limitations of the different strategies for measuring nanoparticle uptake at the single cell level are discussed. KW - Synchrotron KW - BAMline KW - XRF KW - Nanoparticle KW - Macrophagen PY - 2020 DO - https://doi.org/10.1021/acs.chemrestox.9b00507 VL - 33 IS - 5 SP - 1250 EP - 1255 PB - American Chemical Society AN - OPUS4-50855 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, Dejian A1 - Schmidt, Martin A1 - Tan, X. A1 - Zhao, P. A1 - Huang, W. A1 - Qian, X. T1 - Minimum ignition temperature of carbonaceous dust clouds in air with CH4/H-2/CO below the gas lower explosion limit JF - Fuel N2 - Godbert-Greenwald furnace was used to investigate the minimum ignition temperature of dust clouds (MITC) in air with the presence of flammable gas which is lower than its lower explosion limit (LEL). Three flammable gases (CH4, H2 and CO) and three carbonaceous dusts (anthracite coal, bituminous coal and sweet potato starch) were tested. Results showed that all flammable gases have distinct effects on the MITC of the dust samples and volatile matter content of dust plays an important role during the ignition process. Specifically, the MITC of anthracite coal dust decreased from 610 °C to 560 °C, 580 °C and 570 °C with 3% CH4, 3% CO and 2.5% H2, respectively. Moreover, a heterogeneous ignition mechanism model was proposed to verify the equally global ignition characteristic between hybrid anthracite coal-CxHy mixture and bituminous coal. All three gases had an ignorable effect on the MITC of starch dust considering the experimental error. The presence of CO and H2 slightly promoted the ignition of bituminous coal dust, but the addition of CH4 showed a distinct concentration effect on the MITC of bituminous coal: the MITC decreased with 1% CH4 while increased with 2% and 3% CH4. This negative-effect of flammable gases at such low concentrations on ignition temperature of bituminous coal dusts was found for the first time. Furthermore, the presence of the 2nd flammable gas had a smaller effect on the MITC of dust samples with a higher volatile content, resulted from the competition of heterogeneous and homogeneous ignition mechanisms. KW - Dust explosions KW - Gas explosions KW - Minimum ignition temperature KW - Hybrid mixtures PY - 2020 DO - https://doi.org/10.1016/j.fuel.2019.116811 SN - 0016-2361 VL - 264 SP - 116811 PB - Elsevier Ltd. AN - OPUS4-50856 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habib, Abdel Karim A1 - Kluge, Martin T1 - Experimentelle Untersuchungen zu Schäden an Membranabdeckungen im Biogasbereich T2 - 14. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - Bei Störfallauswirkungsbetrachtungen an Biogasanlagen muss das Versagen der Membranabdeckung des Fermenters untersucht werden. Hierbei sind insbesondere Risse in derselben hinsichtlich des austretenden Massenstromes an Biogas zu bewerten, ebenso wie der durch eine Zündung resultierende Flammenstrahl. Zurzeit existieren für Membranabdeckungen jedoch keine Erkenntnisse zu realistischen Ausflussziffern für die Massenstromberechnung. Im Leitfaden KAS-32 wird für Störfallauswirkungsbetrachtungen für die Berechnung des austretenden Massenstromes eine Ausflussziffer von 1 und eine „Leckfläche" von 0,6 m2 vorgegeben. Die Anwendbarkeit verfügbarer Modelle zur Berechnung des Flammenstrahls ist bisher ebenso ungeklärt. Um diese Fragestellungen zu untersuchen, wurden in der BAM Versuche zur Bestimmung der Ausflussziffer, sowie der Zündung des austretenden Gases an einem 80 m3 Sack zur Speicherung von Biogas durchgeführt, der aus demselben Material besteht wie die in Biogasanlagen verwendeten Membranabdeckungen. T2 - 14. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2019 KW - Biogas KW - Ausflussziffer KW - Membranabdeckung PY - 2019 SN - 978-3-89746-220-5 VL - 2019 SP - 142 EP - 152 AN - OPUS4-50857 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babutzka, Martin A1 - Müller, Thoralf A1 - Mietz, Jürgen A1 - Burkert, Andreas T1 - Investigation of the influence of iron‐containing abrasives on the corrosion behaviour of the aluminium alloy AlSi1.2Mg0.4 JF - Materials and Corrosion N2 - The corrosion resistance of aluminium surfaces is closely linked to the surfacecstate after a grinding process. For years, iron‐containing abrasive materials were suspected to lead to increased corrosion susceptibility after processing of aluminium surfaces. To prove a possible correlation between the iron content of an abrasive and the corrosion behaviour of aluminium components, scientific investigations and experimentally practical corrosion tests are necessary. For the current investigation, specimens of a technical Al‐Si alloy from the same batch were used. The test specimens were mechanically ground with various resin‐bonded model abrasives containing different iron contents. The performed corrosion tests did not reveal a negative influence of the different iron‐containing abrasives on the corrosion behaviour of the Al–Si alloy. However, the most sensitive measuring method (electrochemical noise) showed differences in the surface activity depending on the type of abrasive. KW - Aluminium KW - Corrosion KW - Corrosion testing KW - Grinding PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-506762 DO - https://doi.org/10.1002/maco.202011657 SN - 0947-5117 SN - 1521-4176 VL - 71 IS - 10 SP - 1667 EP - 1679 PB - Wiley‐VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-50676 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Wiesler, F. A1 - Hund-Rinke, K. A1 - George, E. A1 - Greef, J.-M. A1 - Holz, F. A1 - Hölze, L.E. A1 - Hülsbergen, K.-J. A1 - Martin, S. A1 - Severin, K. A1 - Spielvogel, S. A1 - Geiger, P. A1 - Nawotke, C. A1 - Kehlenbeck, H. A1 - Schenkel, H. A1 - Adam, Christian A1 - Bloem, E. A1 - Frank, D. A1 - Goldbach, H.E. A1 - Heene, M. A1 - Kratz, S. A1 - Kruse, A. A1 - Möller, K. A1 - Pinnekamp, J. A1 - Schoumans, O.F. A1 - Vogel, Christian A1 - Wulf, S. T1 - Recyclingphosphate in der Düngung – Nutzen und Grenzen N2 - Weltweit werden etwa 80–85 % aller abgebauten Rohphosphate für die Produktion von Düngemitteln verwendet. Bei noch steigendem Bedarf an Phosphor (P) geht man derzeit davon aus, dass die weltweiten P-Reserven noch über 200 Jahre ausreichen. Um den P-Vorrat langfristig abzusichern, sollte der in Reststoffen enthaltene Phosphor möglichst umfänglich genutzt werden. Dieser Forderung trägt das von der Bundesregierung 2012 erstmals beschlossene Deutsche Ressourceneffizienzprogramm ProgRess Rechnung. Rohphosphat wird auch seitens der Europäischen Kommission aufgrundseiner ökonomischen Bedeutung und des unsicheren Angebots als „kritischer Rohstoff“ eingestuft. Vor diesem Hintergrund hat die Bundesregierung in der Verordnung zur Neuordnung der Klärschlammverwertung vom 27. September 2017 in Deutschland eine verpflichtende technische Rückgewinnung von Phosphor für Abwasserbehandlungsanlagen ab einer Ausbaugröße von 100.000 Einwohnerwerten (12 Jahre nach Inkrafttreten der Verordnung) bzw. ab einer Ausbaugröße von über 50.000 Einwohnerwerten (15 Jahre nach Inkrafttreten der Verordnung) vorgeschrieben. Die Verordnung enthält keine Vorgaben hinsichtlich der anzuwendenden Technologie bei der Phosphorrückgewinnung. Ausgenommen von der Rückgewinnungspflicht sind Klärschlämme mit niedrigen Phosphorgehalten (weniger als 20 Gramm Phosphor je Kilogramm Klärschlamm-Trockenmasse). Auch die im Jahre 2017 verabschiedeten neuen Rechtsvorschriften für die Düngung verlangen zukünftig einen nachhaltigen und ressourceneffizienten Umgang mit Nährstoffen bei der landwirtschaftlichen Erzeugung und schränken die P-Zufuhr insbesondere auf hoch versorgten Böden ein (Düngeverordnung vom 26. Mai 2017). Dies wird zu einem mehr am Pflanzenbedarf orientierten und ggf. vermehrt überbetrieblichen Einsatz von wirtschaftseigenen Düngern führen. Um den politischen und gesetzlichen Anforderungen gerecht zu werden, müssen einerseits wirksame und kosteneffiziente technische Verfahren zum P-Recycling (weiter)entwickelt werden. Andererseits müssen die Recyclingprodukte die Anforderungen für eine direkte Verwendung in der Landwirtschaft oder als Rohstoff für die Herstellung von Düngemitteln erfüllen. In dem vorliegenden Standpunkt wird zunächst der potenzielle Beitrag von Reststoffen zur Deckung des P-Bedarfs in der deutschen Pflanzenproduktion geschätzt. Für die wichtigsten Reststoffe werden technische Verfahren zur P-Rückgewinnung bzw. Aufarbeitung skizziert. Auf Basis der Anforderungen der Landwirtschaft bzw. der Düngemittelindustrie an die P-Recyclingprodukte werden deren Herstellungsverfahren bewertet. Schließlich wird der Regelungs- und Forschungsbedarf formuliert. KW - Phosphor KW - Düngemittel KW - Diffusive Gradients in thin films (DGT) PY - 2020 SP - 1 EP - 19 PB - Bundesministerium für Ernährung und Landwirtschaft (BMEL) CY - Berlin AN - OPUS4-51011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quercetti, Thomas A1 - Wille, Frank A1 - Neumann, Martin A1 - Linnemann, Konrad ED - Baraldi, P. ED - Di Maio, F. ED - Zio, E. T1 - Safety Evaluation of a Package for Radioactive Waste by Full-Scale Drop Testing T2 - Proceedings of the 30th European Safety and Reliability Conference and 15th Probabilistic Safety Assessment and Management Conference (ESREL2020 PSAM15) N2 - As part of the evaluation of a package for the safe transport of radioactive waste the regulations of the IAEA International Atomic Energy Agency shall be fulfilled. The regulations define requirements for the package and specify mechanical and thermal test conditions. Different methods are allowed for the test performance to demonstrate compliance with the regulations. Next to calculational approaches and the use of models of an appropriate scale, the performance of full-scale testing with prototype packages respectively full-scale models is applied. The use of full-scale models has several advantages within the complete safety assessment procedure for a transport package approval. Scaling and corresponding similarity questions don’t have to be considered, additional material investigations can be limited and analyses to transfer test results to the original package design are reduced in number and complexity. Additionally, experience for future serial design procedures can be built up during manufacturing and assembling of the test model. BAM operates different drop and fire test facilities south of Berlin, Germany. BAM has started to perform a drop test campaign with a full-scale model of 120 metric tons weight for a transport package approval procedure. The paper describes experience with test preparation, drop performance and additional analyses. The measurement concept is explained and test goals regarding the package safety assessment and evaluation of safety margins are introduced. T2 - 30th European Safety and Reliability Conference and 15th Probabilistic Safety Assessment and Management Conference (ESREL2020 PSAM15) CY - Online meeting DA - 01.11.2020 KW - Slap-down KW - Transport safety KW - Package KW - Drop test KW - Similarity KW - FEA KW - Radioactive waste PY - 2020 UR - https://www.rpsonline.com.sg/proceedings/esrel2020/html/3809.xml SN - 987-981-14-8593-0 SP - Paper 3809,1 EP - 8 PB - Research Publishing Services CY - Singapore AN - OPUS4-50981 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erdmann, Maren A1 - Kleinbub, Sherin A1 - Wachtendorf, Volker A1 - Schütter, Jan David A1 - Niebergall, Ute A1 - Böhning, Martin A1 - Koerdt, Andrea T1 - Photo-oxidation of PE-HD affecting polymer/fuel interaction and bacterial attachment JF - Materials Degradation N2 - In the present study, a simple approach was used to investigate the effect of UV-exposure on two high density Polyethylene materials (PE-HD), commonly used for storage tanks, on fuel sorption behavior and colonization by microorganisms. The aim was to investigate whether the sorption behavior of the fuels (diesel/biodiesel) and the colonization by microorganisms, frequently occurring in the fuel, is affected and may lead to undesirable or safety-relevant material changes. We showed that the UV-irradiation leads to significant changes of the sorption behavior due to chemi-crystallization and crosslinking. The fuel Sorption is affected by the UV-induced formation of polar carbonyl and hydroxyl groups predominantly occurring at the surface. With respect to microbial colonization behavior for Bacillus subtilis and Pseudomonas aeruginosa, isolated from a contaminated diesel sample, differences of the initial adhesion could be shown depending on the initial type of polyethylene as well as on the degree of UV-induced degradation. KW - High density polyethylene KW - Bacterial attachment KW - UV-irradiation KW - Fuel sorption PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-510001 DO - https://doi.org/10.1038/s41529-020-0122-1 VL - 4 IS - 1 SP - Article number: 18 PB - Nature Partner Journals AN - OPUS4-51000 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erdmann, Maren A1 - Niebergall, Ute A1 - Wachtendorf, Volker A1 - Böhning, Martin T1 - Evaluation of UV-induced embrittlement of PE-HD by Charpy impact test JF - Journal of Applied Polymer Science N2 - The impact fracture behavior of two common high-density polyethylene grades for container applications were intensively studied by the instrumented Charpy impact test after well-defined exposure to UV-irradiation. Individual stages of the impact event, such as crack initiation and crack propagation energy as well as maximum impact load, were investigated from the recorded load–deflection curves. UV-induced material property changes were further investigated by infrared spectroscopy, differential scanning calorimetry, and dynamic-mechanical analysis as well as density measurements. Based on the results of the Charpy impact test, three indicators were identified to describe the extend of photooxidation on high-density polyethylene: (a) a reduced Charpy impact strength—at least to half of its initial value for a distinctly brittle impact fracture, (b) a marked decrease in the crack propagation contribution to the impact strength, and (c) an increase of the brittle features of the fracture surface. KW - Degradation KW - Mechanical properties KW - Packaging KW - Polyolefins KW - Polyethylene PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-509130 DO - https://doi.org/10.1002/APP.49069 SN - 0021-8995 VL - 137 IS - 36 SP - 49069 PB - Wiley AN - OPUS4-50913 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Langklotz, U. A1 - Schneider, M. T1 - Beschreibung der Deckschichtbildung bei Zink und Zinklegierungen mittels minimalinvasiver Korrosionsuntersuchungen und analytischer Methoden (MINIMAL) N2 - Der Vortrag stellt ein neuartiges Korrosionsprüfverfahren für Zinküberzüge auf Basis gelartiger Elektrolyte vor und führt die Vorteile gegenüber konventionellen Prüfverfahren auf. Basierend auf den Ergebnissen wird die Idee für einen IGF-Projektantrag in Kooperation mit dem Fraunhofer IKTS vorgestellt. T2 - Web-Meeting GAV-Forschungsbeirat CY - Online meeting DA - 29.04.2020 KW - Deckschichtbildung KW - Zink KW - Korrosionsprüfung KW - Gelartige Elektrolyte PY - 2020 AN - OPUS4-50718 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - THES A1 - Babutzka, Martin T1 - Neue Erkenntnisse zur Deckschichtbildung von Zink an der Atmosphäre T2 - Berichte aus der Werkstofftechnik N2 - Die Korrosionsbeständigkeit und die Dauerhaftigkeit von Zink und Zinküberzügen an der Atmosphäre sind direkt mit der Bildungs- und Auflösungskinetik von schützenden Deckschichten aus festhaftenden Korrosionsprodukten verknüpft. Bei einem optimalen Zusammenwirken und einer günstigen Abfolge von atmosphärischen Einflussfaktoren bilden sich gut schützende, bei Feuchtigkeitszutritt nahezu unlösliche Deckschichten aus. Art und Eigenschaften der gebildeten Deckschichten hängen dabei insbesondere von den Luftinhaltsstoffen der Einsatzumgebung sowie von spezifischen Temperatur-Feuchte-Zyklen ab. Dabei besteht das Problem, dass sich die klimatischen Bedingungen und infolge auch die Deckschichtbildungsreaktionen bei Zink an der Atmosphäre im Laufe der letzten Jahrzehnte stark geändert haben. Das Ziel der vorliegenden Arbeit ist die systematische Untersuchung und Beschreibung von Korrosions- und Deckschichtbildungsvorgängen bei Reinzink unter den aktuell in der Bundesrepublik Deutschland vorherrschenden klimatischen Bedingungen. Die Untersuchungen zielen in ihrer Gesamtheit auf das Hinterfragen aktueller und die Etablierung neuer Betrachtungsweisen zur Deckschichtbildung bei Reinzink unter atmosphärischen Korrosionsbedingungen ab und sollen damit einen wesentlichen Beitrag für das Verständnis des Korrosionsschutzes durch Zink und Zinküberzüge liefern. Dabei wurde der Fokus insbesondere auf das Anfangsstadium der Deckschichtbildung gelegt. Eine systematische Untersuchung dieses Zeitraums, der von sehr reaktiven Deckschichten geprägt ist, wurde erst durch den gezielten Einsatz gelartiger Elektrolyte ermöglicht. KW - Zink KW - Korrosion KW - Deckschichtbildung KW - Atmosphäre KW - gelartige Elektrolyte PY - 2020 SN - 978-3-8440-7626-4 DO - https://doi.org/10.2370/9783844076264 SN - 0945-1056 SP - 1 EP - 181 PB - Shaker Verlag CY - Düren AN - OPUS4-51458 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, A. ED - Lampke, T. ED - Wagner, G. ED - Wagner, M.F.-X. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten T2 - Tagungsband zum 18. Werkstofftechnischen Kolloquium N2 - Bei elektrochemischen Untersuchungen von atmosphärischen Korrosionsreaktionen an deckschicht- und passivschichtbildenden Werkstoffen stößt man elektrolytseitig an Grenzen. So erweisen sich sowohl das Nachempfinden eines dünnen Feuchtfilms als auch die Interpretation von elektrochemischen Messungen in so genannten Bulk-Lösungen (eine „Masse“ an Elektrolyt) hinsichtlich des Korrosionsverhaltens unter atmosphärischen Bedingungen häufig als schwierig. Eine neue Herangehensweise an diese Problemstellung in der Korrosionsforschung beinhaltet den Einsatz von gelartigen Elektrolyten als Alternative zu den Bulk-Elektrolyten. Gelartige Elektrolyte bilden einen dünnen Feuchtfilm auf der Werkstoffoberfläche aus, wodurch die natürlich gebildete Deckschicht ähnlich wie an Atmosphäre beeinflusst wird und nahezu zerstörungsfrei untersucht werden kann. Durch eine elektrochemische Instrumentierung können geeignete Kennwerte wie Polarisationswiderstände und Korrosionsströme ermittelt werden, die Aussagen zur Kinetik der Deckschichtbildung und zur Stabilität der gebildeten Deckschichten unter Einwirkung eines dünnen Feuchtfilms ermöglichen. Anhand von auf Polysaccharid basierenden Gelpads werden im vorliegenden Beitrag verschiedene Zinkschichtsysteme und Aluminiumlegierungen untersucht, die natürlich gebildeten Deckschichten elektrochemisch charakterisiert und korrosionsrelevante Kennwerte bestimmt. Die ermittelten Kennwerte erlauben eine Differenzierung verschiedener Schichtsysteme und beschreiben die momentane Schutzwirkung der Deckschichten unter atmosphärischen Bedingungen. T2 - 18. Werkstofftechnisches Kolloquium der TU Chemnitz CY - Chemnitz, Germany DA - 10.03.2016 KW - Korrosionsuntersuchungen KW - Corrosion investigations KW - Verzinkungen KW - Zing coatings KW - gelartige Elektrolyte KW - Gel-type electrolytes PY - 2016 SN - 978-3-00-052212-3 SN - 1439-1597 VL - 59 SP - 313 EP - 323 PB - TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik CY - Chemnitz AN - OPUS4-35637 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, A. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten N2 - Bei elektrochemischen Untersuchungen von atmosphärischen Korrosionsreaktionen an deckschicht- und passivschichtbildenden Werkstoffen stößt man elektrolytseitig an Grenzen. So erweisen sich sowohl das Nachempfinden eines dünnen Feuchtfilms als auch die Interpretation von elektrochemischen Messungen in so genannten Bulk-Lösungen (eine „Masse“ an Elektrolyt) hinsichtlich des Korrosionsverhaltens unter atmosphärischen Bedingungen häufig als schwierig. Eine neue Herangehensweise an diese Problemstellung in der Korrosionsforschung beinhaltet den Einsatz von gelartigen Elektrolyten als Alternative zu den Bulk-Elektrolyten. Gelartige Elektrolyte bilden einen dünnen Feuchtfilm auf der Werkstoffoberfläche aus, wodurch die natürlich gebildete Deckschicht ähnlich wie an Atmosphäre beeinflusst wird und nahezu zerstörungsfrei untersucht werden kann. Durch eine elektrochemische Instrumentierung können geeignete Kennwerte wie Polarisationswiderstände und Korrosionsströme ermittelt werden, die Aussagen zur Kinetik der Deckschichtbildung und zur Stabilität der gebildeten Deckschichten unter Einwirkung eines dünnen Feuchtfilms ermöglichen. Anhand von auf Polysaccharid basierenden Gelpads werden im Vortrag verschiedene Zinkschichtsysteme und Aluminiumlegierungen untersucht, die natürlich gebildeten Deckschichten elektrochemisch charakterisiert und korrosionsrelevante Kennwerte bestimmt. Die ermittelten Kennwerte erlauben eine Differenzierung verschiedener Schichtsysteme und beschreiben die momentane Schutzwirkung der Deckschichten unter atmosphärischen Bedingungen. T2 - 18. Werkstofftechnisches Kolloquium der TU Chemnitz CY - Chemnitz, Germany DA - 10.03.2016 KW - gelartige Elektrolyte KW - Verzinkungen KW - Korrosionsuntersuchungen KW - gel-type electrolytes KW - zinc coatings KW - corrosion investigations PY - 2016 AN - OPUS4-35552 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschaikner, Martin A1 - Redmer, Bernhard A1 - Ewert, Uwe A1 - Bullinger, O. A1 - Schnars, U. A1 - Schulting, D. T1 - Laminographic inspection of large fibre composite structures at the production site N2 - Short describtion of the technology and results of laminography. T2 - 7th International Symposium on NDT in Aerospace CY - Bremen, Germany DA - 16.11.2015 KW - Laminography KW - 3D Reconstruction KW - Inspection of CFRP KW - Laminografie KW - 3D Rekonstruktion KW - Untersuchung von CFK PY - 2015 AN - OPUS4-35610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konnertz, Nora A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Dielectric investigations of nanocomposites based on matrimid and polyhedral oligomeric phenethyl-silsesquioxanes (POSS) JF - Polymer N2 - Matrimid and Matrimid/PhenethylPOSS nanocomposites films were prepared by solution casting. They can be considered as potential membrane materials for gas separation. Theire dielectric properties were investigated using Broadband Dielectric Spectroscopy (BDS) in combination with standard techniques. Matrimid shows one relaxation process assigned as beta*-relaxation and a conductivity contribution. The relaxation process has a high activation energy of 99 kJ/mol. Thus this process is supposed to be of cooperative nature due to a π-π stacking of the phenyl rings of Matrimid. The influence of the thermal history on Matrimid was analyzed with BDS as well where an annealing effect is found. The Matrimid/PhenethylPOSS nanocomposites show up to a concentration of about 4 wt% PhenethylPOSS a miscibility on a molecular level. For higher concentrations a phase separated structure was indicated. The conductivity of both systems is explained by π-π stacking of the phenyl rings which enhances charge transport. KW - Matrimid KW - POSS KW - Nanocomposites KW - Broadband dielectric spectroscopy PY - 2016 DO - https://doi.org/10.1016/j.polymer.2016.02.060 SN - 0032-3861 VL - 90 SP - 89 EP - 101 PB - Elsevier Science AN - OPUS4-35616 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Konnertz, Nora A1 - Böhning, Martin A1 - Schönhals, Andreas A1 - Ding, Yi T1 - Molecular mobility and gas transport properties of PIM-1 and nano composites based on PIM-1 and phenethylPOSS N2 - Polymers with intrinsic microporosity are of highly interest in the field of gas separation membranes. Especially the first synthesized PIM-1 shows extraordinary permeabilities and selectivities. Unfortunately, PIM-1 tends to physical aging and loses its good properties. Physical aging is related to the molecular mobility of PIM-1 which was here investigated by broadband dielectric spectroscopy (BDS). Besides the studies on pure PIM-1 a polyhedral oligomeric silsesquioxane with phenethyl substituents (PhenethylPOSS) was used as nanofiller (0 - 40 wt-%) in the PIM-1 matrix to improve the gas transport properties and prevent physical aging. The molecular mobility of the solution casted nano composite films was analyzed by BDS as well. Furthermore, gas transport properties were determined with the time lag method (0 - 20 bar) in a temperature range of 35°C to 65°C with N2, O2, CH4 and CO2. T2 - 80. Jahrestagung der DPG und DPG-Frühjahrstagung CY - Regensburg, Germany DA - 06.03.2016 KW - PIM-1 PY - 2016 AN - OPUS4-35541 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Müller, Thoralf A1 - Lehmann, Jens A1 - Babutzka, Martin A1 - Burkert, Andreas ED - Borsutzki, M. ED - Moninger, G. T1 - Bewertung werkstofftechnischer Einflussfaktoren auf die Passivschichtstabilität nichtrostender Stähle mittels Korrosionsschneltest T2 - Tagung Werkstoffprüfung 2015 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis N2 - Mit Hilfe des KorroPad-Prüfverfahrens konnten verschiedene umgebungs- sowie prozessbedingte Einflüsse in Parameterstudien gezielt untersucht werden. So konnte der negative Einfluss von korundbasierten Schleifmitteln auf die Passivschichtausbildung nachgewiesen werden. Weiterhin konnte mittels KorroPad die Wirksamkeit verschiedener Oberflächenbearbeitungsverfahren bei der Schweißnahtnachbearbeitung untersucht und daraus Erkenntnisse für die Prozessoptimierung gewonnen werden. In den hier gezeigten Untersuchungen hat sich das KorroPad-Prüfverfahren für die Beschreibung der Passivschichtstabilität als hervorragend geeignet erwiesen. N2 - By using the KorroPad test a wide ränge of environmental and process-related factors couid be investigated in parameter studies. Thus, the negative influence of corundum-based abrasives on passive layer formation was proven. Furthermore the effectiveness of different surface treatments for weld seam reworking was investigated and thus process optimization was possible. The investigations demonstrate that the KorroPad test method is highly suitable for the evaluation of passive layer stability. T2 - Tagung Werkstoffprüfung 2014 - Fortschritte in der Werkstoffprüfung für Forschung und Praxis CY - Bad Neuenahr, Germany DA - 03.12.2015 KW - Rapid corrosion test KW - Surface treatment KW - Quality control KW - Stainless steel KW - Korrosionsschnelltest KW - Oberflächenbehandlung KW - Qualitätskontrolle KW - Nichtrostender Stahl PY - 2015 SN - 978-3-514-00816-8 SP - 95 EP - 100 PB - Verlag Stahleisen CY - Düsseldorf AN - OPUS4-35233 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Buzanich, Günter A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Scharf, O. A1 - Scholz, Philipp A1 - Guerra, M.F. T1 - Double Dispersive X-Ray Fluorescence (D2XRF) based on an Energy Dispersive pnCCD detector for the detection of platinum in gold JF - Microchemical Journal N2 - With the aim of improving limits of detection (LOD) of trace elements in a matrix with adjacent fluorescence energies, a simple double dispersive X-ray fluorescence detection system (D2XRF) was constructed to operate at the beamlines BAMline and the mySpot @ BESSY II. This system is based on the combination of a crystal analyzer with an energy resolving single photon counting pnCCD. Without further collimators, the efficient suppression of the background by the pnCCD and the good energy resolution of the crystal results in improved LOD. In first order reflections, an energy resolution of 13 eV for Cu Kα was reached, and an energy range of 1 keV was covered in one shot. This new system was applied to the detection of platinum (Pt) in gold leaves with a LOD of 0.9 mg/kg, which is the lowest attained by totally non-destructive methods nowadays. The presence of Pt in gilded objects from Abydos and Byzantine mosaics provides vital information, as it indicates the alluvial origin of the gold for these examples. KW - Platinum Wavelength dispersive D2XRF KW - Gold Synchrotron XRF PY - 2016 DO - https://doi.org/10.1016/j.microc.2015.10.039 VL - 125 SP - 56 EP - 61 PB - Elsevier Science CY - Amsterdam AN - OPUS4-35777 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Konnertz, Nora A1 - Ding, Yi A1 - Harrison, W.J. A1 - Budd, P.M. A1 - Schönhals, Andreas A1 - Böhning, Martin T1 - Molecular mobility of the high performance membrane polymer PIM-1 as investigated by dielectric spectroscopy JF - ACS Macro Letters N2 - The increasing demand for energy efficient separation processes fosters the development of new high performance polymers as selective separation layers for membranes. PIM-1 is the archetypal representative of the class of polymers of intrinsic microporosity (PIM) which are considered most promising in this sector, especially for gas separations. Since their introduction, PIMs stimulated a vast amount of research in this field and meanwhile evolved to the state of the art in membrane technology for gas separation. The major obstacle for extending the practical membrane application is their strong tendency to physical aging. For the first time, investigations by broadband dielectric spectroscopy (BDS) addressing molecular dynamics and conductivity in PIM 1 are presented. As chain packing during film formation from the casting solution and physical aging are key factors determining the separation performance of PIMs as membrane materials, characterization of the molecular mobility in such materials as revealed by BDS will provide valuable information for further development and optimization. KW - PIM-1 KW - BDS broadband dielectric spectroscopy KW - Relaxation KW - Membrane PY - 2016 DO - https://doi.org/10.1021/acsmacrolett.6b00209 SN - 2161-1653 VL - 5 IS - 4 SP - 528 EP - 532 PB - ACS American Chemical Society CY - Washington, DC, USA AN - OPUS4-35798 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gaber, Martin A1 - Müller, Ralf A1 - Höland, W. T1 - Degassing phenomena during sintering and crystallization of glass powders N2 - Degassing may cause trouble in manufacture of sintered glass-ceramics via the Formation of bubbles (deteriorate mechanical strength or surface Quality) T2 - 6th Int. Otto Schott Colloquium CY - Jena, Germany DA - 06.09.1998 KW - Bulk diffusion KW - Sintering KW - Crystallization KW - Melting PY - 1998 AN - OPUS4-35785 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hutt, S. A1 - Eisele, G. A1 - Krause, Martin T1 - Ultraschalltransmissionsanalyse am Cottaer Sandstein - Erste messtechnische Tastversuche JF - Restauro N2 - Besonders beim Bauen im Bestand und der Bauwerkserhaltung werden zur Bestimmung des Tragvermögens von historischen, oft unter Denkmalschutz stehenden, natursteinernen Bauteilen Materialkennwerte benötigt. Die üblichen Verfahren mittels Probeentnahme am Objekt und Bestimmung der Kennwerte im Labor bedeuten bei Denkmälern einen massiven Eingriff und sollten vermieden werden. Vermehrt wird daher der Einsatz von zerstörungsfreien Untersuchungsmethoden erforscht und angewendet. Eine dieser Methoden stellt die Ultraschallprüfung dar. KW - Ultraschalltransmission KW - Naturstein KW - Uniaxialer Druck PY - 2015 SN - 0933-4017 VL - 2 SP - 22 EP - 29 PB - Callwey CY - München AN - OPUS4-32980 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Brand- und Explosionsgefahren beim Umgang mit Metallstäuben T2 - Fortbildungsseminar Metallpulver - Erzeugen, Charakterisieren, Anwenden T2 - Fortbildungsseminar Metallpulver - Erzeugen, Charakterisieren, Anwenden CY - Bremen, Deutschland DA - 2015-03-26 PY - 2015 AN - OPUS4-33005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Müller, Thoralf A1 - Burkert, Andreas T1 - Untersuchung des Einflusses von eisenhaltigen Schleifmitteln auf die Korrosion bei der Aluminiumbearbeitung T2 - Jahrestagung 2015 der Forschungsgemeinschaft Schleiftechnik e.V. (FGS) T2 - Jahrestagung 2015 der Forschungsgemeinschaft Schleiftechnik e.V. (FGS) CY - Würzburg, Germany DA - 2015-03-19 PY - 2015 AN - OPUS4-33008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Sicherstellung des Korrosionsschutzes durch werkstoffgerechte Verarbeitung nichtrostender Stähle T2 - 23. Erfahrungsaustasch und Weiterbildung für Schweißaufsichtspersonen und Verantwortliche der werkseigenen Produktionskontrolle im bauaufsichtlichen Bereich, Nachfolgeseminar der GSI SLV Polska T2 - 23. Erfahrungsaustasch und Weiterbildung für Schweißaufsichtspersonen und Verantwortliche der werkseigenen Produktionskontrolle im bauaufsichtlichen Bereich, Nachfolgeseminar der GSI SLV Polska CY - Zabrze, Poland DA - 2015-06-02 PY - 2015 AN - OPUS4-33336 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Thomas, Hans-Martin A1 - Maser, Dieter A1 - Wittig, Günther T1 - Erzeugung sowie analoge und digitale Aufbereitung von Signalen zum Nachweis von Materialfehlern mit dem Impuls-Wirbelstromverfahren JF - Material und Technik PY - 1981 SN - 0376-6845 IS - 3 SP - 153 EP - 158 PB - Schweizerischer Verband für die Materialprüfungen der Technik CY - Dübendorf AN - OPUS4-33328 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin T1 - Design of a Pulsed Eddy-Current Test Equipment with Digital Signal Analysis T2 - Eddy-current characterization of materials and structures: a symposium sponsored by ASTM Committee E-7 on Nondestructive Testing T2 - Symposium on Eddy-Current Characterization of Materials and Structures CY - Gaithersburg, MD, USA DA - 1979-09-05 PY - 1981 N1 - Serientitel: ASTM special technical publication – Series title: ASTM special technical publication IS - 722 SP - 387 EP - 397 PB - ASTM CY - Philadelphia, PA, USA AN - OPUS4-33330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin T1 - Voruntersuchungen an Dampferzeugerrohr-Testkörpern mit dem Impuls-Wirbelstromverfahren T2 - Vorträge / 4. Internationale Konferenz über Zerstörungsfreie Prüfung in der Kerntechnik T2 - 4. Internationale Konferenz über Zerstörungsfreie Prüfung in der Kerntechnik CY - Lindau, Germany DA - 1981-05-25 PY - 1981 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 8 SP - 571 EP - 579 PB - DGZfP CY - Berlin AN - OPUS4-33331 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin T1 - Untersuchungen an Komponenten aus Aluminiumlegierungen mit dem Impuls-Wirbelstromverfahren T2 - 2. Europäische Tagung für Zerstörungsfreie Prüfung T2 - 2. Europäische Tagung für Zerstörungsfreie Prüfung CY - Wien DA - 1981-09-14 PY - 1981 SP - ? (8 S.) CY - Wien AN - OPUS4-33332 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin T1 - Rißnachweis und Rißtiefenbestimmung an Stutzenkanten des HDR mittels Impuls-Wirbelstrom- und Ultraschallverfahren T2 - Beiträge zum: 5. Statusbericht des Projektes HDR-Sicherheitsprogramm des Kernforschungszentrums Karlsruhe T2 - Sitzung des Projektes HDR-Sicherheitsprogramm des Kernforschungszentrums Karlsruhe CY - Karlsruhe, Germany DA - 1981-12-10 PY - 1981 N1 - Serientitel: PHDR-Arbeitsbericht – Series title: PHDR-Arbeitsbericht IS - 81,5.8 SP - 1 EP - 42 PB - Kernforschungszentrum Karlsruhe CY - Karlsruhe AN - OPUS4-33333 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosemann, P. A1 - Müller, Thoralf A1 - Babutzka, Martin A1 - Heyn, Andreas T1 - Influence of microstructure and surface treatment on the corrosion resistance of martensic stainless steels 1.4116, 1.4034, and 1.4021 JF - Materials and corrosion N2 - In the last years, new approaches for the evaluation of the corrosion resistance of martensitic stainless steels were developed, which allow nearly non-destructive as well as short-term corrosion testing. This work analyzes the sensitive influence of microstructure and surface treatment on the corrosion resistance. The effect of alloy composition and microstructure, which is always present in addition to the influence of various surface treatments will be evaluated and discussed. The corrosion behavior was investigated with conventional evaluation of the pitting potential, electrochemical potentiodynamic reactivation (EPR), electrochemical noise (EN), and the 'KorroPad' (KP) technique. EPR provided information about the passivation ability and the extent of chromium content reduction due to chromium carbide precipitation in the microstructure. The use of EN and KP aims to detect the influence of different surface treatment parameters on the corrosion resistance in a nearly non-destructive way. Furthermore the results shall demonstrate the functionality and convenience of the short-term corrosion test methods EN and KP in order to gain more acceptance within the scientific community. The results will allow the extraction of surface treatment effects on the corrosion behavior of the martensitic stainless steels 1.4116, 1.4034, and 1.4021. KW - Corrosion resistance KW - Electrochemical noise KW - Martensitic stainless steel KW - Electrochemical potentiodynamic reactivation KW - KorroPad KW - EPR-Test KW - Heat treatment PY - 2015 DO - https://doi.org/10.1002/maco.201307276 SN - 0947-5117 SN - 1521-4176 VL - 66 IS - 1 SP - 45 EP - 53 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-32572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Nowak, S.H. A1 - Bjeoumikhov, A. A1 - Von Borany, J. A1 - Buchriegler, J. A1 - Munnik, F. A1 - Petric, M. A1 - Radtke, Martin A1 - Renno, A.D. A1 - Reinholz, Uwe A1 - Scharf, O. A1 - Wedell, R. T1 - Sub-pixel resolution with a color X-ray camera JF - Journal of analytical atomic spectrometry N2 - The color X-ray camera SLcam® is a full-field, single photon detector providing scanning-free, energy and spatially resolved X-ray imaging. Spatial resolution is achieved with the use of polycapillary optics guiding X-ray photons from small regions on a sample to distinct energy dispersive pixels on a charged-coupled device detector. Applying sub-pixel resolution, signals from individual capillary channels can be distinguished. Therefore, the SLcam® spatial resolution, which is normally limited to the pixel size of the charge-coupled device, can be improved to the size of individual polycapillary channels. In this work a new approach to a sub-pixel resolution algorithm comprising photon events also from the pixel centers is proposed. The details of the employed numerical method and several sub-pixel resolution examples are presented and discussed. KW - Color X-ray camera KW - Sub pixel analysis PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-334948 DO - https://doi.org/10.1039/c5ja00028a SN - 0267-9477 SN - 1364-5544 SP - 1890 EP - 1897 PB - Royal Society of Chemistry CY - London AN - OPUS4-33494 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter A1 - Kunath, K. A1 - Uhlig, S. T1 - Homogenität und Stabilität der Ringversuchs-Probe, Interlabory test 2010/11 DIN EN 15188:2007 T2 - Kolloquium des Arbeitskreises "Brennbare Stäube":Interlabory test 2010/11 DIN EN 15188:2007 - self-ignition temperature" T2 - Kolloquium des Arbeitskreises "Brennbare Stäube":Interlabory test 2010/11 DIN EN 15188:2007 - self-ignition temperature" CY - Dresden, Deutschland DA - 2013-01-29 PY - 2013 AN - OPUS4-33533 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Kurz, J.H. A1 - Lanata, F. A1 - Krstevska, L. A1 - Cavalli, A. T1 - Needs for further developing monitoring- and NDT-methods for timber structures T2 - SHATIS 2015 - 3rd International conference on structural health assessment of timber structures N2 - For the assessmentand for monitoring of timber structures there are numerous promising methods that enable the quantitative description of the current condition of construction elements or parts of a structure. This concerns material properties like modulus of elasticity, moisture content and density as well as structural properties like dynamic characteristics, localization of inhomogeneities, cracks, and biological attack. During the work in COST Action FP 1101, since 2012 the capability of experimental methods are discussed and compared. This covers electrical and electromagnetic wave methods (resistivity, microwave, Radar, X-Ray), elastic waves (ultrasound, pile testing) and mechanical testing (static and dynamic). Describing and collecting the use of the experimental methods for monitoring purposes was the objective of working group 3 "Monitoring of Timber Structures" of the COST Action. Monitoring capabilities will extend the use of timber structures to further applications in civil engineering. So far, no standard exists but collections of application examples and review papers representing the state of the art. From there needs for further developments regarding monitoring and NDT methods for timber structures can be identified and these are described in this paper. T2 - SHATIS 2015 - 3rd International conference on structural health assessment of timber structures CY - Wroclaw, Poland DA - 09.09.2015 KW - Holz Konstruktionen KW - Monitoring KW - Langzeitverhalten KW - Erdbebensicherheit KW - Historische Bauwerke KW - Ultrasonic echo imaging KW - Historical timber structures KW - Seismic investigation KW - Dynamic tests KW - Anisotropic wave propagation KW - Extending service life PY - 2015 VL - 1 SP - 1 EP - 12 AN - OPUS4-35178 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Mayer, K. A1 - Effner, Ute T1 - Ultrasonic echo methods for structural timber T2 - COST Workshop - Highly performing timber structures: Reliability, assessment, monitoring and strengthening N2 - Ultrasonic echo technique with shear waves in the frequency rang of 50 kHz is one of the promising methods for assessment of structural timber and is already frequently applied for this purpose. The article summarizes the state of the art of applying echo measurement via linear measurements as well as the development and first results for an imaging method for this purpose. The highly anisotropic properties of the ultrasonic velocity have to be considered. 3 D ultrasonic imaging results are described for the example of a pedestrian bridge made from Siberian larch. T2 - COST Workshop - Highly performing timber structures: Reliability, assessment, monitoring and strengthening CY - Biel, Switzerland DA - 23.09.2014 KW - Ultrasonic echo KW - SAFT reconstruction calculation KW - Glued-laminated timber (glulam) KW - Footbridge KW - Ultraschallecho KW - SAFT KW - Brettschichtholz PY - 2014 SN - 978-3-9523787-3-1 SP - 77 EP - 82 PB - Bern University of Applied Sciences CY - Bern AN - OPUS4-35179 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lezhnina, M.M. A1 - Kätker, H. A1 - Kaiser, Martin A1 - Stegemann, L. A1 - Voss, E. A1 - Resch-Genger, Ute A1 - Strassert, C. A1 - Kynast, U. T1 - Chemical behavior and spectroscopic properties of rare earth borates in glazes JF - Journal of Luminescence N2 - Efficient Near UV excited materials (350<λ<400 nm) responding with green line emission are sparse in comparison to higher energy UV excited emitters (λ<350 nm), while corresponding red line emitters are more abundant, albeit typically also restricted to excitation wavelengths below 400 nm. This situation is disadvantageous for several important actual and potential applications. Among these, excitation with high power UV-LEDs and laser diodes are of particular interest. Here we present results on green emitting YBO3:Ce, Tb, which can be excited with 370–380 nm radiation at quantum efficiencies of up to 60% and decay times in excess of 2 ms. Moreover, as powderous phosphors typically require stable matrices to be hosted in, we investigated low melting, lead- and fluoride-free glasses for their capability to accommodate the phosphor and yet retain its optical properties. In these, we even observed an increase of the quantum efficiencies of up to 70% at decay times approaching 3 ms. Finally, we characterized the thermal quenching behavior, which showed a clear advantage of the phosphors in glassy matrices. KW - Rare earth phosphors KW - Energy transfer KW - Luminescent glasses and glazes PY - 2016 DO - https://doi.org/10.1016/j.jlumin.2015.05.005 SN - 0022-2313 SN - 1872-7883 VL - 170 SP - 387 EP - 394 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-35131 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kabelitz, Anke A1 - de Oliveira Guilherme Buzanich, Ana A1 - Joester, Maike A1 - Reinholz, Uwe A1 - Radtke, Martin A1 - Bienert, Ralf A1 - Schulz, K. A1 - Schmack, R. A1 - Kraehnert, R. A1 - Emmerling, Franziska T1 - Time-resolved in situ studies on the formation mechanism of iron oxide nanoparticles using combined fast-XANES and SAXS JF - CrystEngComm N2 - The reaction of iron chlorides with an alkaline reagent is one of the most prominent methods for the synthesis of iron oxide nanoparticles. We studied the particle formation mechanism using triethanolamine as reactant and stabilizing agent. In situ fast-X-ray absorption near edge spectroscopy and small-angle X-ray scattering provide information on the oxidation state and the structural information at the same time. In situ data were complemented by ex situ transmission electron microscopy, wide-angle X-ray scattering and Raman analysis of the formed nanoparticles. The formation of maghemite nanoparticles (γ-Fe2O3) from ferric and ferrous chloride was investigated. Prior to the formation of these nanoparticles, the formation and conversion of intermediate phases (akaganeite, iron(II, III) hydroxides) was observed which undergoes a morphological and structural collapse. The thus formed small magnetite nanoparticles (Fe3O4) grow further and convert to maghemite with increasing reaction time. KW - oxidation state KW - structural information KW - maghemite PY - 2015 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-351376 DO - https://doi.org/10.1039/C5CE01585E SN - 1466-8033 VL - 17 IS - 44 SP - 8463 EP - 8470 CY - London, UK AN - OPUS4-35137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Niebergall, Ute A1 - Zanotto, M. A1 - Wachtendorf, Volker A1 - Böhning, Martin T1 - Impact of biodiesel sorption on tensile properties of PE-HD for container applications JF - Polymer Testing N2 - In previous papers, we investigated the influence of biodiesel or diesel on mechanical properties of a high-density polyethylene (PE-HD) for tank applications using Charpy impact tests and dynamicmechanical analysis (DMA). In this work, covering two more PE-HD materials, we extend our study to addressing the tensile properties, especially changes of Young's modulus, after immersion in biodiesel or diesel at 60 °C. As we cover sorption and desorption behavior, during desorption, i.e. storage at 60 °C in a circulating air oven, ageing or degradation phenomena were also observed and characterized in some detail using spectral reflectance measurements and FT-IR spectroscopy. The results obtained here support the concept of co-oxidation, i.e. the faster oxidation of the PE-HD matrix if the samples were previously saturated with biodiesel, itself easily oxidizable. KW - polyethylene KW - biodiesel KW - biofuels KW - sorption KW - plasticization KW - degradation PY - 2016 DO - https://doi.org/10.1016/j.polymertesting.2016.01.025 SN - 0142-9418 VL - 50 SP - 315 EP - 324 PB - Elsevier AN - OPUS4-35369 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Wille, Frank A1 - Nehrig, Marko A1 - Feldkamp, Martin ED - Sorenson, K.B. T1 - Thermal performance of transportation packages for radioactive materials T2 - Safe and secure transport and storage of radioactive materials - 1st Ed. N2 - Prevention of damage caused by heat is one of the objectives during package safety evaluation. This chapter describes basics of heat transfer and major aspects of regulatory requirements. Package temperature criteria and fire test conditions are explained. Special package design features regarding material properties and safety evaluation concepts are discussed. Experimental fire testing is performed by pool fire or with the help of a furnace. Analysis by numerical or analytical approaches show temperature gradients and whether compliance with the regulatory requirements and specified design temperatures is met. The tightness of the package lid system influenced by geometry changes is in the focus of a holistic thermo-mechanical approach considering the entire mechanical and thermal load conditions according the regulatory requirements. KW - Package KW - Safety KW - Storage KW - Transport KW - Testing KW - Convection KW - Fire test KW - Heat KW - Insulation KW - Thermal analysis PY - 2015 SN - 978-1-78242-309-6 SN - 978-1-78242-322-5 DO - https://doi.org/10.1016/B978-1-78242-309-6.00008-3 N1 - Serientitel: Woodhead publishing series in energy – Series title: Woodhead publishing series in energy IS - 78 SP - Chapter 8, 107 EP - 121 PB - Woodhead Publ. AN - OPUS4-33842 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Röntgenfluoreszenzanalyse mit Synchrotronstrahlung an der Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin T2 - Seminar: "Strahlenphysikalische Anwendungen in Technik und Medizin" T2 - Seminar: "Strahlenphysikalische Anwendungen in Technik und Medizin" CY - Wien, Österreich DA - 2015-01-14 PY - 2015 AN - OPUS4-34014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - Analysis of ancient gold objects with SRXRF at the BAMline T2 - Technart 2015 T2 - Technart 2015 CY - Catania, Italien DA - 2015-04-27 PY - 2015 AN - OPUS4-34007 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Experiences with the Color X-Ray Camera at the BAMline T2 - X-ray Spectroscopy Detectors for Present and Future Synchrotron Storage rings: Opportunities for Horizon 2020 T2 - X-ray Spectroscopy Detectors for Present and Future Synchrotron Storage rings: Opportunities for Horizon 2020 CY - Paris, Frankreich DA - 2015-03-16 PY - 2015 AN - OPUS4-34009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Effner, Ute A1 - Milmann, Boris A1 - Völker, Christoph A1 - Wiggenhauser, Herbert A1 - Mauke, R. T1 - Ultrasonic testing of a sealing construction made of salt concrete in an underground disposal facility for radioactive waste T2 - NDT-CE 2015 T2 - NDT-CE 2015 CY - Berlin, Gemany DA - 2015-09-15 PY - 2015 AN - OPUS4-34443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Ebell, Gino A1 - Burkert, Andreas A1 - Heyn, Andreas T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten T2 - Jahrestagung 2015 der GfKORR T2 - Jahrestagung 2015 der GfKORR CY - Frankfurt/Main DA - 2015-11-03 PY - 2015 AN - OPUS4-34730 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Agroui, K. A1 - Collins, G. A1 - Oreski, G. A1 - Böhning, Martin A1 - Hadj Arab, A. A1 - Ouadjaout, D. T1 - Effect of crosslinking on EVA-based encapsulant properties during photovoltaic module fabrication process JF - Revue des energies renouvelables N2 - The key objective of this work is to create a comprehensive comparison between experimental analysis methods for detecting crosslinking reaction in EVA encapsulant material during PV module fabrication process. Several analytical methods, spanning from classical gel content extraction measurements over different thermo-analytic and mechanical approaches to spectroscopic analysis as Thermally Stimulated Current (TSC), have been investigated as to their ability to reveal the crosslinking state of ethylene vinyl acetate (EVA). The basic results show that TSC complements perfectly other thermal analysis methods like as Differential Scanning Calorimetry (DSC), Dynamic Mechanical Thermal Analysis (DMTA) to determine fundamental properties of EVA such as molecular mobility characteristics and also to monitor the crosslinking reaction. Exothermic peak as revealed by DSC analysis can be used to estimate the crosslinking rate of EVA during PV module encapsulation process as fast quality control test. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L'objectif principal de ce travail est de permettre une meilleure compréhension entre les différentes techniques analyses expérimentales pour détecter la réaction de réticulation au niveau de l’encapsulant Ethylène-Vinyle Acétate (EVA), durant le process de fabrication d'un module PV. Plusieurs méthodes d'analyse, allant du test classique d'extraction du taux de gel aux différentes techniques d'analyses thermomécaniques ainsi que les techniques d'analyse de spectroscopie comme le courant stimulé thermiquement (TSC), ont été étudiés pour permettre de révéler le phénomène de la réaction de réticulation de l'encapsulant l'EVA. Les résultats de base montrent que la TSC complète parfaitement d'autres méthodes d'analyses thermiques comme la calorimétrie différentielle à balayage (DSC), l'analyse mécanique dynamique (DMTA) pour déterminer les propriétés fondamentales de l'EVA. Ces techniques permettent de déterminer les caractéristiques relatives à la mobilité moléculaire et aussi pour mieux mettre en évidence la réaction de réticulation. Le pic exothermique comme révélé par l'analyse par DSC, peut être utilisé pour estimer le taux de réticulation de l'EVA au cours du process d'encapsulation du module PV comme un test rapide de contrôle de qualité. KW - EVA KW - Photovoltaic module KW - Crosslinking process KW - Thermal properties KW - Mechanical properties PY - 2015 SN - 1112-2242 VL - 18 IS - 2 SP - 303 EP - 314 AN - OPUS4-34994 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Schmidt, Martin T1 - Nanoskalig hergestellte Materialien - neueste Erkenntnisse T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - Die steigende Produktion und Nachfrage von Materialien mit Primärpartikelgrößen im Nanometerbereich (insbesondere wegen der veränderten Eigenschaften) erfordert eine intensive Auseinandersetzung mit der Thematik zur Risikoabschätzung. Sogenannte Nanostäube können aus brennbaren Ausgangsmaterialien bestehen. Beispiele für brennbare Nanostäube, die in großen Mengen hergestellt werden, sind Metallstäube, Ruße (Carbon Black) oder andere Kohlenstoffverbindungen, welche u. a. für die Herstellung von Gummi, Kunststoffen, Beschichtungsstoffen oder Farben verwendet werden. Aufgrund von Erfahrungen mit Stäuben mit Partikelgrößen im Mikrometerbereich ist bekannt, dass Stoffe mit abnehmender Partikelgröße kritischer einzustufen sind, da z.B. maximaler Explosionsdruck, zeitlicher Druckanstieg und Zündempfindlichkeit durch die Zunahme der reaktiven Oberfläche des Staubes zunimmt. Alle Erkenntnisse zum Ablauf von Staubexplosionen, aus der Auswertung von Schadensereignissen sowie aus der Bestimmung sicherheitstechnischer Kenngrößen und hierbei gefundene Abhängigkeiten basieren auf Schadensereignissen bzw. Untersuchungen von Stäuben mit Korngrößen im Bereich von Mikrometern. Inwieweit sich die Erkenntnisse auf feinere Partikel bis hin zum Nanometerbereich übertragen lassen, wurde im Rahmen der durchgeführten Arbeiten näher untersucht. In diesem Beitrag werden die wesentlichen Ergebnisse kurz dargestellt und basieren auf den Arbeiten im Zuge der Dissertationsschrift zum Brand- und Explosionsverhalten von Nanostäuben. T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 05.11.2015 KW - Explosionsschutz KW - Brennbare Stäube KW - Nanomaterialien KW - Nanostäube PY - 2015 SN - 978-3-86011-091-1 SP - F-01 EP - 1-10 AN - OPUS4-34943 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Klippel, Alexander T1 - Der Einfluss des Staubungsverhaltens auf druckentlastete Staubexplosionen - experimentelle und numerische Untersuchungen T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - Die Auslegung von Einrichtungen zur Druckentlastung von Staubexplosionen erfolgt in der Regel gemäß DIN EN 14491. Die Norm enthält empirische Gleichungen mit denen, unter Verwendung der sicherheitstechnischen Kenngrößen maximaler Explosions(über)druck und maximaler zeitlicher Druckanstieg bzw. dem KSt-Wert, erforderliche Entlastungsflächen zum konstruktiven Schutz von Behältern und Anlagen berechnet werden. Das Verfahren ermög-licht in der Regel eine konservative Auslegung von Entlastungsflächen. Zur praxisgerechte-ren Betrachtung erfolgten der Vergangenheit bereits Untersuchungen zum Einfluss bestimm-ter Verfahren zur Produkteinleitung bzw. Befüllung auf die Bildung von Staubwolken in Silos oder Behältern, welche einen wesentlichen Einfluss auf die erforderliche Druckentlastungs-fläche aufweisen. Bisher unberücksichtigt blieb, dass die Bildung von Staubwolken sehr stark von den chemischen und physikalischen Eigenschaften des Schüttgutes abhängt. Da auch bei scheinbar ähnlichen Produkten das Aufwirbel- und Schwebeverhalten sehr unterschied-lich sein kann, ist hierdurch ein erheblicher Einfluss auf die Bildung explosionsfähiger Staub/Luft-Gemische und damit auf die erforderliche Entlastungsfläche zu erwarten. Ziel experimenteller und numerischer Untersuchungen war es daher, den Einfluss des Ver-mögens von Stäuben aufgewirbelt zu werden bzw. deren Dispergierverhalten in Luft auf die erforderliche Druckentlastungsfläche zu ermitteln. Hierbei sollte überprüft werden, inwieweit bei Stäuben mit geringer Staubungsneigung eine Verringerung der Druckentlastungsfläche möglich ist. Die durchgeführten Untersuchungen zeigten, dass die Randbedingungen, insbesondere die Strömungsrandbedingungen, die bei einem Verarbeitungs- oder Förderprozess vorliegen, einen wesentlich stärkeren Einfluss auf die Dispergierung eines Staubes aufweisen als sein Staubungsverhalten. Eine Anpassung bzw. Reduzierung der Druckentlastungsfläche allein auf Basis des Staubungsverhaltens ist daher nicht möglich. T2 - 12. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 05.11.2015 KW - Staubexplosionen KW - Staubungsverhalten KW - Explosionsschutz PY - 2015 SN - 978-3-86011-091-1 SP - C-03, 1-15 AN - OPUS4-34944 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kaiser, Martin A1 - Würth, Christian A1 - Resch-Genger, Ute A1 - Hyppänen, I. A1 - Soukka, T. T1 - Integration Sphere Setup of the Absolute Determination of Upconversion Quantum Yields of Rare Earth Doped Nanoparticles T2 - iNOW2013 International Nano Optoelectronics Workshop T2 - iNOW2013 International Nano Optoelectronics Workshop CY - Korsika, France DA - 2013-08-19 PY - 2013 AN - OPUS4-30392 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fittschen, U.E.A. A1 - Menzel, M. A1 - Scharf, O. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Buzanich, Günter A1 - Lopez, V.M. A1 - McIntosh, K. A1 - Streli, C. A1 - Havrilla, G.J. T1 - Observation of X-ray shadings in synchrotron radiation-total reflection X-ray fluorescence using a color X-ray camera JF - Spectrochimica acta B N2 - Absorption effects and the impact of specimen shape on TXRF analysis has been discussed intensively. Model calculations indicated that ring shaped specimens should give better results in terms of higher counts per mass signals than filled rectangle or circle shaped specimens. One major reason for the difference in signal is shading effects. Full field micro-XRF with a color X-ray camera (CXC) was used to investigate shading, which occurs when working with small angles of excitation as in TXRF. The device allows monitoring the illuminated parts of the sample and the shaded parts at the same time. It is expected that sample material hit first by the primary beam shade material behind it. Using the CXC shading could be directly visualized for the high concentration specimens. In order to compare the experimental results with calculation of the shading effect the generation of controlled specimens is crucial. This was achieved by 'drop on demand' technology. It allows generating uniform, microscopic deposits of elements. The experimentally measured shadings match well with those expected from calculation. KW - TXRF KW - Full field micro-XRF KW - Color X-ray camera PY - 2014 DO - https://doi.org/10.1016/j.sab.2014.06.025 SN - 0584-8547 SN - 0038-6987 VL - 99 SP - 179 EP - 184 PB - Elsevier CY - Amsterdam AN - OPUS4-31180 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trela, Christiane A1 - Kind, Thomas A1 - Schubert, Marcus A1 - Klee, Martin ED - Lambot, S. ED - Giannopoulos, A. ED - Pajewski, L. ED - André, F. ED - Slob, E. ED - Craeye, C. T1 - Detection of weak scatterers in reinforced concrete structures T2 - GPR 2014 - 15th International conference on ground penetrating radar (Proceedings) T2 - GPR 2014 - 15th International conference on ground penetrating radar CY - Brussels, Belgium DA - 2014-06-30 KW - Radarmessungen KW - Automatisierung KW - Strukturerkennung KW - Stahlbeton KW - Reflection profiling KW - Data processing KW - SAFT reconstruction and visualisation of NDT-datasets PY - 2014 N1 - Geburtsname von Klee, Martin: Günther, M. - Birth name of Klee, Martin: Günther, M. SP - 904 EP - 910 AN - OPUS4-31168 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krietsch, Arne A1 - Kwangvitayanon, Yolada A1 - Schmidt, Martin A1 - Klippel, Alexander A1 - Schröder, Volkmar A1 - Scheid, M. T1 - Validation of the new ignition source 'exploding wire' for dust explosion testing in the 20-L-sphere T2 - Hazards 24 Symposium (Proceedings) N2 - The safety characteristics Maximum Explosion Pressure pniB, Maximum Explosion Pressure Rise (dp/dt)™* and Lower Explosion Limit LEL are determined in closed vessels such as the 20-L-sphere according to international Standards. Dust ignition is carried out using pyrotechnical igniters which are defined in the Standards. Due to various disadvantages of pyrotechnical igniters the need for alternative ignition sources arises again and again. Studies at the Federal Institute for Material Research and Testing (BAM) with ignition units which were able to generate ignition energies up to 2000 J showed that the so-called “exploding wire” or “fuse wire“ is suitable as an alternative ignition source. The paper presents further test results for the Validation of the exploding wire for the determination of Pm» and (dp/dt)mx in the 20-L-sphere. The tests were performed with a new ignition unit and improved electrodes which allowed ignition energies up to 10000 J. The paper also analyses propagation of flame and electrical arc on basis of high speed camera recordings. Turbulence measurements with a LDA System in the 20-L-sphere allowed investigation whether the activation of the ignition sources has an influence on the turbulence field generated during dust dispersion and whether the influence differs depending on the ignition source. T2 - Hazards 24 Symposium CY - Edinburgh, UK DA - 07.05.2014 KW - Dust explosion testing KW - Exploding wire KW - Explosion characteristics KW - Ignition source PY - 2014 SN - 978-0-85295-582-6 N1 - Serientitel: IChemE Symposium Series – Series title: IChemE Symposium Series VL - 159 SP - 1 EP - 7 AN - OPUS4-31145 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Everard, C.D. A1 - Schmidt, Martin A1 - McDonnell, K.P. A1 - Finnan, J. T1 - Heating processes during storage of Miscanthus chip piles and numerical simulations to predict self-ignition JF - Journal of loss prevention in the process industries N2 - Miscanthus x Giganteus (Miscanthus) energy crop was examined at laboratory scale to assess its self-heating and self-ignition risks during storage. Chipped Miscanthus (18 mm) from February and March harvests, in 2012, were assessed as well as ground Miscanthus (3 mm) from the March harvest. February and March crops had moisture contents of 41.6 and 20.2%, respectively. Self-ignition temperatures were independent of moisture although moisture did affect the time from the beginning of storage until storage temperature was reached. Ground Miscanthus had lower self-ignition temperatures than chipped Miscanthus. Isothermal respirometric tests carried out showed increase risk of self-heating in the February crop compared to the March crop due to increased microbial activity. Numerical simulations were used to determine critical enhanced start temperatures, e.g. caused by microbial decomposition, of the stored Miscanthus. Safe storage conditions have been derived from the investigations. The numerical simulations demonstrated that self-ignition was possible in Miscanthus chip piles with a height greater than 6 m if there was significant heat release from microbiological activity. Reliable assessment of self-heating and self-ignition risks in large scale Miscanthus energy crop clamps or piles are required to prevent losses due to decomposition and fire damage. KW - Miscanthus x Giganteus KW - Hot storage test KW - Respirometric rates KW - Self-heating KW - Self-ignition KW - Numerical simulations KW - Biomass storage PY - 2014 DO - https://doi.org/10.1016/j.jlp.2014.06.003 SN - 0950-4230 SN - 1873-3352 VL - 30 SP - 188 EP - 196 PB - Butterworth CY - Guildford, Surrey AN - OPUS4-31149 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Jaunich, Matthias A1 - Böhning, Martin A1 - Braun, Ulrike A1 - Teteris, G. A1 - Stark, W. T1 - Investigation of the curing state of ethylene/vinyl acetate copolymer (EVA) for photovoltaic applications by gel content determination, rheology, DSC and FTIR JF - Polymer Testing N2 - The cure behaviour of a specific ethylene vinyl acetate material as used for encapsulation of photovoltaic modules was analysed by rheometer, differential scanning calorimetry and Fourier transform infrared spectroscopy to test for a suitable replacement for the laborious determination of gel content. The results show that all applied methods are capable of describing the effects of the cross-linking process. Some provide results very similar to those yielded by analysis of the insoluble content, but the question remains as to whether indirect methods should be preferred over the direct measurement of physical properties, e.g. as performed by the curemeter. A material stored for one year was also tested to demonstrate the effect of extended storage on cure behaviour and how this is detected by different methods. This complements the other methods, which were clearly able to detect the different cure behaviour of the aged EVA, whereas determination of the gel content could not. KW - Photovoltaic cell encapsulation KW - EVA KW - Incoming goods control KW - Insoluble content KW - Rheometer PY - 2016 DO - https://doi.org/10.1016/j.polymertesting.2016.03.013 SN - 0142-9418 VL - 52 IS - 1 SP - 133 EP - 140 PB - Elsevier Ltd. CY - Oxford, UK AN - OPUS4-35918 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Dreyhsig, Gesa A1 - Grasse, Dennis A1 - Donner, Marcel T1 - Untersuchung des Deflagrationsverhaltens von Methan-Luft-Gemischen in einem 5-m³-Behälter bei Single- und Multipoint-Ignition N2 - Vorstellung einer Versuchsreihe, die sich mit dem Einfluss von Flammenausbreitungen in geschlossenen Behältern auf die Druckanstiegsgeschwindigkeiten der explosionsartigen Verbrennung von Methan-Luft-Gemischen beschäftigt. T2 - 14. Fachtagung "Anlagen-, Arbeits- und Umweltsicherheit" CY - Köthen, Germany DA - 07.11.2019 KW - Druckanstiegsgeschwindigkeit KW - Deflagration KW - Flammenausbreitung KW - Explosionsdruck KW - Methan-Luft-Gemisch PY - 2019 AN - OPUS4-50223 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Habib, Abdel Karim A1 - Kluge, Martin T1 - Ausflussziffer und Brandverhalten von Rissen in der Folienabdeckung von Biogasanlagen JF - Technische Sicherheit N2 - Bei Störfallauswirkungsbetrachtungen an Biogasanlagen muss das Versagen der Folienabdeckung der Gärbehälter untersucht werden. Hierbei sind insbesondere Risse in derselben hinsichtlich des austretenden Massenstromes an Biogas zu bewerten, ebenso wie der durch eine Zündung resultierende Flammenstrahl. Zurzeit existieren für Biogasfolien keine Erkenntnisse zu realistischen Ausflussziffern für die Massenstromberechnung. Die Anwendbarkeit verfügbarer Modelle zur Berechnung der Wärmestrahlung ist ebenso bisher ungeklärt. Um diese Fragestellungen zu untersuchen, wurden in der BAM Versuche an einem 80 m3 Biogassack durchgeführt. KW - Biogas KW - Ausflussziffer KW - Abbrand KW - Experimente PY - 2019 SN - 2191-007 VL - 9 IS - Juli/August 2019 SP - 24 EP - 29 PB - VDI Fachmedien GmbH & Co. KG CY - Düsseldorf AN - OPUS4-49181 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - De Samber, B. A1 - Scharf, Oliver A1 - Buzanich, Günter A1 - Garrevoet, J. A1 - Tack, P. A1 - Radtke, Martin A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe A1 - Evens, R. A1 - De Schamphelaere, K. A1 - Falkenberg, G. A1 - Janssen, C. A1 - Vincze, L. T1 - Three-dimensional X-ray fluorescence imaging modes for biological specimens using a full-field energy dispersive CCD camera JF - Journal of analytical atomic spectrometry N2 - Besides conventional scanning X-ray fluorescence imaging at synchrotron sources, full-field X-ray fluorescence (FF-XRF) imaging techniques that do not implicitly require spatial scanning of the sample have become available. FF-XRF has become achievable thanks to the development of a new type of energy dispersive CCD-based 2D detector, also referred to as a 'color X-ray camera (CXC)' or 'SLcam'. We report on different imaging schemes for biological samples using FF-XRF imaging: (a) 2D 'zoom' imaging with pinhole optics using the 'camera obscura' principle; (b) 2D 'fixed magnification' imaging using magnifying polycapillary optics; and (c) 3D-FF-XRF imaging using an X-ray sheet beam or computed tomography (CT). The different FF-XRF imaging modes are illustrated using the crustacean Daphnia magna, a model organism for investigating the effects of metals on organism/ecosystem health, and foraminifera, a class of amoeboid protist. Detailed analytical characterization of the set-up is performed through analyzing various reference materials in order to determine limits of detection (LODs) and sensitivities. Experiments were performed using the BAMline at the BESSY synchrotron (Berlin, Germany) and using the P06 Hard X-ray Microprobe at the PETRAIII synchrotron (Hamburg, Germany). KW - CXC KW - BAMline KW - Maia detector KW - Synchrotron PY - 2019 DO - https://doi.org/10.1039/c9ja00198k VL - 34 IS - 10 SP - 2083 EP - 2093 PB - Royal Society of Chemistry CY - Cambridge, United Kingdom AN - OPUS4-49359 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Offshore-Windenergieanlagen – Ist ein dauerhafter und gleichzeitig “sauberer” Korrosionsschutz möglich? N2 - Der Vortrag verdeutlicht am Beispiel von Offshore-Windenergieanlagen, welchen Beitrag ein geeigneter Korrosionsschutz zu Fragen der Wirtschaftlichkeit, der Gesundheitstechnik und der Sicherheit leistet. Die Umweltverträglichkeit von Korrosionsschutzmaßnahmen wird anhand der Emission von chemischen Substanzen und Verbindungen beleuchtet. T2 - 29. Berliner Gesundheitstechnische Tagung - 70 Jahre Gesundheitstechnische Gesellschaft CY - Berlin, Germany DA - 08.11.2019 KW - Offhsore-Windenergieanlagen KW - Umweltverträglichkeit KW - Korrosion KW - Korrosionsschutz PY - 2019 AN - OPUS4-49560 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Interlaboratory Test Programme for Chemical Safety - Need of Test Methods Validation - N2 - Safety experts, manufacturers, suppliers, importers, employers or consumers must be able to rely on the validity of safety-related test methods and on correct test results and assessments in the laboratory. Via the eChemPortal lots of data from the REACH registration dossiers are available. However, the quality and correctness of the information remains in the responsibility of the data submitter. Unfortunately, we found more or less appropriate information on physicochemical properties and concluded that more quality or adequacy of any data submitted will be needed. Interlaboratory tests play a decisive role in assessing the reliability of test results. Interlaboratory tests on different test methods have been performed by Bundesanstalt für Materialforschung und –prüfung (BAM) and Physikalisch-Technische Bundesanstalt (PTB) in collaboration with the QuoData GmbH during the last 10 years. Significant differences between the results of the participating laboratories were observed in all interlaboratory tests. The deviations of the test results were not caused only by laboratory faults but also by deficiencies of the test method. In view of the interlaboratory test results the following conclusions can be drawn: • To avoid any discrepancy on classification and labelling of chemicals it should become state of the art to use validated test methods and the results accompanied by the measurement uncertainty. • A need for improvement is demonstrated for all examined test methods. Thus, interlaboratory tests shall initially aim at the development, improvement and validation of the test methods and not on proficiency tests. • The laboratory management and the practical execution of the tests need to be improved in many laboratories. • The term "experience of the examiner" must be seen critically: A "long experience with many tests" is not necessarily a guarantee for correct results. T2 - 16th International Symposium on Loss Prevention and Safety Promotion in the Process Industrie CY - Delft, Netherlands DA - 16.06.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Validierung KW - Qualitätssicherung KW - Prüfmethode PY - 2019 AN - OPUS4-49568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Erdt, René A1 - Gödde, M. A1 - Salg, S. T1 - Selbstentzündungsverhalten von Feststoffen: Validierung der Extrapolation von Labortests N2 - In der Regel wird das Selbstentzündungsverhalten mit Hilfe von isoperibolen oder adiabaten Warmlagerungsversuchen beurteilt, hier liegen die Probenvolumina üblicherweise im Bereich von ca. 100 cm3 bis zu einigen Litern. Die Extrapolation auf technisch relevante Volumina birgt jedoch erhebliche Unsicherheiten. Diese beruhen auf: - Extrapolation über mehrere Größenordnungen, - Limitierungen der verwendeten Extrapolationsmethode (enge Start- und Randbedingungen), - dem unterschiedlichen Temperaturniveau der Laborversuche im Vergleich zu technischen Lagerungen, insbesondere der Einfluss des enthaltenen Wassers, - nicht eindeutige Kriterien für Zündung/Nichtzündung, - Einfluss verschiedener Extrapolationsverfahren, - mit Hilfe von Laborversuchen nicht erfassbarer Reaktionen (Niedertemperaturoxidationen, Zersetzung, Autokatalyse etc.), - Streuungen der Messergebnisse. Diese Unsicherheiten zu verringern ist Inhalt des vorgestellten Forschungsprojektes. Hauptziele des Projektes sind daher, die im Labormaßstab vorhandenen Prüfeinrichtungen durch einen Versuchsstand zur Untersuchung von Probengrößen von bis zu 1000 dm3 zu erweitern, die Eignung (oder Nichteignung) der etablierten Methoden nachzuweisen und im Labormaßstab nicht erfassbare Einflussgrößen zu ermitteln. Zudem sollen anhand der kleinskaligen Tests Entscheidungskriterien abgeleitet werden, ob eine Extrapolation nach den derzeit üblichen Methoden zulässig ist. Erste Ergebnisse des Projektes bestätigen, dass die Bestimmung des Selbstentzündungsverhaltens von Stäuben und Schüttgütern und insbesondere die Ermittlung reaktionskinetischer Daten mit erheblichen Unsicherheiten behaftet sind. Sowohl Warmlagefungsversuche im Labormaßstab als auch mit Hilfe verschiedener Methoden ausgewertete thermoanalytische Methoden lassen, insbesondere einzeln betrachtet, zum Teil nur bedingt verlässliche Aussagen über das Selbstentzündungsverhalten großer Schüttungen zu. Vollständige Versuchsreihen unter Nutzung aller vorgestellten Untersuchungsmethoden sollen präsentiert und abhängig vom Probenmaterial - Schlussfolgerungen hinsichtlich der Zulässigkeit der Extrapolationsmethoden diskutiert werden. T2 - 14. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2019 KW - Spontanious ignition KW - Self-ignition KW - Minimun ignition temperature KW - Dust layers PY - 2019 AN - OPUS4-50073 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Gröke, Carsten T1 - Maintenance and periodic inspections for packagings not requiring CA-approval N2 - In this presentation the main requirements of BAM-GGR 016 regarding maintenance and periodic inspections were explained. BAM ensures during acceptance of the quality management program that specific and relevant instructions for maintenance and periodic inspections are developed and handed to the operator of the packaging. Examples are given. T2 - FORO Iberoamericano CY - Madrid, Spain DA - 25.11.2019 KW - Maintenance KW - Periodic inspections KW - Radioactive material KW - Package PY - 2019 AN - OPUS4-50049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kulow, Anicó A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe A1 - Streli, C. A1 - Radtke, Martin T1 - On the way to full-field X-ray fluorescence spectroscopy imaging with coded apertures JF - Journal of Analytical Atomic Spectrometry N2 - Imaging with X-rays is a challenging field, due to the optical properties of X-rays. The fabrication of appropriate optics is usually expensive and requires an elaborate manufacturing process. One simpler and less expensive possibility of imaging high energy radiation is coded aperture imaging, a technique well established in astrophysics and also used in nuclear medicine or radiation detection, e.g., for nuclear decommissioning. Our aim is to adapt coded aperture imaging for X-ray fluorescence spectroscopy in the nearfield. In this work we show theoretical considerations and preliminary simulations of Image formation through a coded aperture and three different reconstruction methods to prepare the experiments. We used a new mask based on an inverted modified uniformly redundant array (MURA) that could be used for the construction of a decoding mask for all investigated geometrical arrangements. The most commonly used reconstruction method, convoluting the detected image with a Decoding mask, does not always deliver satisfactory results. This is more noticeable for small distances between the object, mask and detector. Hence, we developed two new reconstruction methods, one based on iterative algebraic optimization and another one based on a genetic algorithm. Both show good performance even in those cases where the convolution method fails. This provides a basis for further investigations of the ideal parameters for near field coded aperture imaging and refinements of the algorithms. We performed first measurements with a coded aperture at the BAMline at BESSY II and could successfully reconstruct a test object from the obtained recorded images. KW - X-ray fluorescence spectroscopy KW - Coded aperture KW - Imaging KW - Iterative reconstruction PY - 2020 DO - https://doi.org/10.1039/c9ja00232d VL - 35 IS - 2 SP - 347 EP - 356 PB - Royal Society of Chemistry CY - Cambridge AN - OPUS4-50459 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Neue Erkenntnisse zum Korrosionsverhalten von Zink an der Atmosphäre N2 - Die Untersuchungen und Ausführungen im Vortrag belegen, dass verfügbare Modellvorstellungen zur Beschreibung der Deckschichtbildung und Korrosion von Zink unter aktuellen atmosphärischen Bedingungen in Europa nicht mehr gültig sind und neu bewertet werden müssen. So können beispielsweise bisher verfügbare Prognosemodelle den Korrosionsfortschritt nicht mehr ausreichend beschreiben, da durch die Verringerung des Schwefeldioxidgehaltes der Luft veränderte Mechanismen vorliegen. T2 - 69. Sitzung des NA 062-01-71 AA "Korrosion und Korrosionsschutz" CY - Berlin, Germany DA - 27.02.2020 KW - Korrosion KW - Zink KW - Atmosphärische Korrosion KW - Korrosionsprüfung KW - Deckschichtbildung KW - gelartige Elektrolyte PY - 2020 AN - OPUS4-50479 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Patrick P. A1 - Kohlhoff, Harald A1 - Hüllmann, Dino A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Dzierliński, M. A1 - Lilienthal, A. J. A1 - Bartholmai, Matthias T1 - Aerial-based gas tomography – from single beams to complex gas distributions JF - European Journal of Remote Sensing N2 - In this paper, we present and validate the concept of an autonomous aerial robot to reconstruct tomographic 2D slices of gas plumes in outdoor environments. Our platform, the so-called Unmanned Aerial Vehicle for Remote Gas Sensing (UAV-REGAS), combines a lightweight Tunable Diode Laser Absorption Spectroscopy (TDLAS) gas sensor with a 3-axis aerial stabilization gimbal for aiming at a versatile octocopter. While the TDLAS sensor provides integral gas concentration measurements, it does not measure the distance traveled by the laser diode’s beam nor the distribution of gas along the optical path. Thus, we complement the set-up with a laser rangefinder and apply principles of Computed Tomography (CT) to create a model of the spatial gas distribution from a set of integral concentration measurements. To allow for a fundamental ground truth evaluation of the applied gas tomography algorithm, we set up a unique outdoor test environment based on two 3D ultrasonic anemometers and a distributed array of 10 infrared gas transmitters. We present results showing its performance characteristics and 2D plume reconstruction capabilities under realistic conditions. The proposed system can be deployed in scenarios that cannot be addressed by currently available robots and thus constitutes a significant step forward for the field of Mobile Robot Olfaction (MRO). KW - Aerial robot olfaction KW - Mobile robot olfaction KW - Gas tomography KW - TDLAS KW - Plume PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-487843 DO - https://doi.org/10.1080/22797254.2019.1640078 SP - 1 EP - 16 PB - Taylor & Francis CY - London AN - OPUS4-48784 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Investigation of the salinization in marine and offshore environment - test methods and challenges N2 - Salinization and contamination of metal surfaces by chloride-containing aerosols is of great importance with regard to corrosion phenomena in the maritime sector and in offshore applications. Especially Offshore Wind Turbines are exposed to extreme corrosive conditions due to high chloride concentrations in the atmosphere and the resulting high chloride deposition rates. It is of great importance to evaluate to what extent salinization of the surface influences the corrosion protection of coatings and pitting occurrence on stainless steels under atmospheric conditions to evaluate the durability of metallic building structures in offshore and marine environments. The evaluation of the scientific literature and regulatory guidelines has shown that there are still many open questions regarding the contamination of metal surfaces by chlorides. This contribution will discuss how salinization of metal surfaces is evaluated and monitored according to current standards and guidelines. Future challenges concerning test methods and the application of evaluated salinization values and deposition rates will be discussed. T2 - 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures CY - Potsdam, Germany DA - 27.08.2019 KW - Maritime Atmosphäre KW - Versalzung KW - Maritime atmosphere KW - Salinization PY - 2019 AN - OPUS4-48787 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Fire reference test for IAEA package thermal testing in a propane gas fire test facility T2 - Proceedings of the 19th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019 N2 - Packages for the transport of radioactive material shall withstand severe accidents. Therefore, the IAEA Regulations define different test scenarios to cover severe hypothetical accident conditions. One of these tests defined in detail is the thermal test, mainly consisting of a 30 minute fully engulfing 800 °C pool fire or an equally severe fire test. The heat fluxes into the package are of significant importance and depend substantially on the fire characteristics and the surface temperature of the package. In order to investigate the heat fluxes over a wide range of surface temperatures during a propane gas fire test and to get information about local fire impact a fire reference package, representing the outer geometry of a specific type of transport cask for radioactive waste, was designed. A closed steel sheet cylinder with a wall thickness of 10 mm was chosen as fire reference package. The cylinder was filled with refractory insulation material and instrumented with thermocouples distributed all over the cylinder. The local steel sheet temperatures measured allow the determination of local as well as global heat fluxes as a function of time and surface temperature. With this fire reference package three open-air propane gas fire tests were performed at BAM’s open air fire test stand. The flame exposure time period was changed for the different fire tests. Furthermore, the wind conditions changed between and during the tests. Test stand parameters like wind shield location and propane gas volume flow were chosen constant for the three tests. The test results were used to determine the changes of heat flux into the fire reference package in relation to the package surface temperature. This data also allows the calculation of local characteristics of the propane gas fire as there are the flame temperature, the fire convection coefficient and the radiation exchange coefficient in a first approach. The recently conducted tests provide an initial picture of local fire characteristics of the propane gas fire test facility. The test shows that the propane gas fire covers the IAEA-fire over a wide range of surface temperatures with the chosen test stand parameters. T2 - 19th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019 CY - New Orleans, LA, USA DA - 04.08.2019 KW - Fire test KW - Propane gas KW - Calorimetric test KW - IAEA fire testing PY - 2019 SP - Paper 1141, 1 EP - 10 AN - OPUS4-48840 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Fire reference test for IAEA package thermal testing in a propane gas fire test facility N2 - Packages for the transport of radioactive material shall withstand severe accidents. Therefore, the IAEA Regulations define different test scenarios to cover severe hypothetical accident conditions. One of these tests defined in detail is the thermal test, mainly consisting of a 30 minute fully engulfing 800 °C pool fire or an equally severe fire test. The heat fluxes into the package are of significant importance and depend substantially on the fire characteristics and the surface temperature of the package. In order to investigate the heat fluxes over a wide range of surface temperatures during a propane gas fire test and to get information about local fire impact a fire reference package, representing the outer geometry of a specific type of transport cask for radioactive waste, was designed. A closed steel sheet cylinder with a wall thickness of 10 mm was chosen as fire reference package. The cylinder was filled with refractory insulation material and instrumented with thermocouples distributed all over the cylinder. The local steel sheet temperatures measured allow the determination of local as well as global heat fluxes as a function of time and surface temperature. With this fire reference package three open-air propane gas fire tests were performed at BAM’s open air fire test stand. The flame exposure time period was changed for the different fire tests. Furthermore, the wind conditions changed between and during the tests. Test stand parameters like wind shield location and propane gas volume flow were chosen constant for the three tests. The test results were used to determine the changes of heat flux into the fire reference package in relation to the package surface temperature. This data also allows the calculation of local characteristics of the propane gas fire as there are the flame temperature, the fire convection coefficient and the radiation exchange coefficient in a first approach. The recently conducted tests provide an initial picture of local fire characteristics of the propane gas fire test facility. The test shows that the propane gas fire covers the IAEA-fire over a wide range of surface temperatures with the chosen test stand parameters. T2 - 19th International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019 CY - New Orleans, LA, USA DA - 04.08.2019 KW - Thermal testing KW - Convection coefficient KW - IAEA fire KW - Propane gas fire test facility PY - 2019 AN - OPUS4-48841 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe A1 - Emmerling, Franziska T1 - Materials research with synchrotron radiation N2 - Synchrotron radiation sources with their unique properties in terms of intensity, polarization and adjustability offer a wide range of possibilities in materials research. A basic introduction about the creation and special properties of synchrotron radiation will be given. Examples of current work at BAMline, the high-energy measuring facility of the Federal Institute for Materials Research and Testing at the synchrotron BESSY, are used to illustrate the possibilities and limitations of existing measuring methods. It will be shown how the formation of corrosion layers can be tracked, how the abrasion of implants leads to the introduction of heavy metals into the surrounding bone matrix and how the detection of smallest impurities in gold is possible by optimizing the measuring conditions. Finally, an outlook at the hardware and software developments to be expected in the coming years is given. T2 - INCT-FNA Symposium 2019 CY - Niteroi, Brazil DA - 27.05.2019 KW - Synchrotron KW - XRF KW - XANES KW - EXAFS KW - TXRF KW - Color X-ray Camera PY - 2019 AN - OPUS4-48897 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fittschen, U.E.A. A1 - Möckel, R. A1 - Schreiner, M. A1 - klinger, M. A1 - Radtke, Martin A1 - Meyer, B. A1 - Guhl, S. A1 - Renno, A. A1 - Godinho, J. A1 - Gloaguen, R. A1 - Gutzmer, J. T1 - Bundling analytical capacities to understand phase formation in recycling of functional materials JF - Materials Science Forum N2 - Transitioning from combustion engine-driven transportation to e-mobility demands a paradigm shift – from a system geared to maximize energy efficiency (i.e. fuel consumption) to a system that may be constrained by the availability of high technology (critical) metals required for electrical energy storage systems and drives. In the wake of these developments efforts in securing new resources of these metals from recycling of end-of-life products are increasing steadily. Recycling of Li-Ion batteries has recently been evaluated. The results pinpoint to a critical need for understanding slag Formation and its dependence on metal components like Mn under extreme conditions. This will allow researchers to predict optimal Operation setting and to react quickly to changing market demands (which may be Li or Co at one point but may also shift to Ni or rare earth elements (REE)). The long-term goal is to control the formation of specific phases in slags allowing for a Maximum yield of elements of interest and optimal recovery in the separation processes that follows. The combination of data on the physical micro structure and local chemistry of the multi-Phase products during and after processing will help to understand and derive thermodynamic and kinetic data on its formation. In this paper we are giving an overview on the analytical challenges and approaches to provide robust data on local element concentration and species (especially Mn which is a common component of next generation Li-ion batteries cathodes), spanning the dimensions from the nanometer scale to the bulk material. The complementary interactions of X-rays and electrons make them ideal probes to collect Interface and “in-depth” information. Before- and -after studies as well as in situ structural changes and Phase (trans)formation, changes in elemental and elemental species (e.g. oxidation state) distribution may be tracked by X-ray diffraction (XRD), X-ray fluorescence microscopy and X-ray Absorption spectroscopy. The application of such advanced analytical tools will not only provide essential clues during early lab-based experiments towards the development of new recycling technologies, but may also be deployed for on-line and in-line monitoring of industrial processes. KW - Synchrotron KW - XANES KW - Slags KW - Battery PY - 2019 DO - https://doi.org/10.4028/www.scientific.net/MSF.959.183 SN - 1662-9752 VL - 959 SP - 183 EP - 190 PB - Trans Tech Publ. AN - OPUS4-48900 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Machine learning for direct quantification of XRF measurements N2 - In X-ray fluorescence (XRF), a sample is excited with X-rays, and the resulting characteristic radiation is detected to detect elements quantitatively and qualitatively. Quantification is traditionally done in several steps: 1. Normalization of the data 2. Determination of the existing elements 3. Fit of the measured spectrum 4. Calculation of concentrations with fundamental parameters / MC simulations / standard based The problem with standard based procedures is the availability of corresponding standards. The problem with the calculations is that the measured intensities for XRF measurements are matrix-dependent. Calculations must, therefore, be performed iteratively (= time consuming) in order to determine the chemical composition. First experiments with gold samples have shown the feasibility of machine learning based quantification in principle. A large number of compositions were simulated (> 10000) and analyzed with a deep learning network. For first experiments, an ANN (Artificial Neural Network) with 3 hidden layers and 33x33x33 neurons was used. This network learned the mapping of spectra to concentrations using supervised learning by multidimensional regression. The input layer was formed by the normalized spectrum, and the output layer directly yielded the searched values. The applicability for real samples was shown by measurements on certified reference materials. T2 - Denver X-ray Conference CY - Lombard, IL, USA DA - 05.08.2019 KW - Machine learning KW - Artificial intelligence KW - Neural network KW - XRF KW - Synchrotron PY - 2019 AN - OPUS4-48903 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Investigation of the salinization in marine and offshore environment - test methods and challenges T2 - Proceedings of the International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures N2 - Salinization and contamination of metal surfaces by chloride-containing aerosols is of great importance with regard to corrosion phenomena in the maritime sector and in offshore applications. Especially Offshore Wind Turbines are exposed to extreme corrosive conditions due to high chloride concentrations in the atmosphere and the resulting high chloride deposition rates. It is of great importance to evaluate to what extent salinization of the surface influences the corrosion protection of coatings and pitting occurrence on stainless steels under atmospheric conditions to evaluate the durability of metallic building structures in offshore and marine environments. The evaluation of the scientific literature and regulatory guidelines has shown that there are still many open questions regarding the contamination of metal surfaces by chlorides. This contribution will discuss how salinization of metal surfaces is evaluated and monitored according to current standards and guidelines. Future challenges concerning test methods and the application of evaluated salinization values and deposition rates will be discussed. T2 - 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures CY - Potsdam, Germany DA - 27.08.20019 KW - Maritime Atmosphäre KW - Versalzung KW - Maritime atmosphere KW - Salinization PY - 2019 SP - Th.2.A.5, 1 EP - 8 PB - SMAR 2019 AN - OPUS4-48905 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas T1 - Prüfverfahren zur Bewertung der kathodischen Enthaftung bei organischen Beschichtungen – Eine kritische Betrachtung N2 - Zum Schutz vor Korrosionsprozessen werden metallene Werkstoffe in der Automobilindustrie üblicherweise mit komplexen Beschichtungssystemen versehen. Durch eine Beschädigung des Beschichtungssystems kann bei Zutritt von Feuchtigkeit und korrosionsstimulierenden Ionen das Metallsubstrat korrodieren und unter Umständen die Beschichtung im Bereich neben der Verletzung enthaften. Dabei gibt es verschiedene Mechanismen, die zu einer Unterwanderung und Enthaftung der Beschichtung führen können. In jedem Fall wird aber die Dauerhaftigkeit des Korrosionsschutzes negativ beeinflusst und die Lebensdauer des Bauteils herabgesetzt. Die Industrie versucht deshalb, Beschichtungssysteme zu entwickeln, die dem Vorgang der kathodischen Enthaftung bestmöglich widerstehen können. Einen kritischen Entwicklungs- und Qualifizierungsschritt stellt dabei die geeignete Prüfung auf kathodische Unterwanderung und Enthaftung dar, da eine Prüfung der Beschichtung möglichst schnell und kosteneffizient zu belastbaren Ergebnissen führen soll. Neben den industriell üblichen Salzsprühnebeltests kommen häufig elektrochemische Polarisationstests zur Anwendung. Verschiedene Automobilherstellerhaben verwenden jeweils angepasste Tests, die sich bezüglich der Prüfparameter unterscheiden. Bei allen Testvarianten wird aber versucht, durch Verschärfung der Prüfparameter kurze Prüfzeiträume zu erreichen. Dabei kann es aber dazu kommen, dass die real ablaufenden Mechanismen der Unterwanderung beeinflusst und verändert werden und das Prüfergebnis von Ergebnissen im Feld zum Teil stark abweicht. Im Vortrag werden mit Blick auf die geltenden Regelwerke und Normen die Unterschiede verschiedener Prüfmethoden zur kathodischen Enthaftung bei organischen Beschichtungen vorgestellt und deren Aussagekraft kritisch betrachtet. Am Beispiel von systematischen Versuchsreihen an einem ausgewählten Kurzzeittest werden die Grenzen einiger Methoden herausgearbeitet und die Anwendbarkeit für Qualitätsprüfungen betrachtet. Durch den Ansatz der statistischen Versuchsplanung wird der Einfluss einzelner Prüfparameter auf die Enthaftung und das Ergebnis des Kurzzeittests gezeigt. T2 - ZVO-Oberflächentage CY - Berlin, Germany DA - 11.09.2019 KW - Kathodische Enthaftung KW - Korrosionsprüfung KW - Organische Beschichtungen KW - Cathodic delamination KW - Corrosion testing KW - Organic coatings PY - 2019 AN - OPUS4-48960 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Erdt, René A1 - Gödde, M. A1 - Salg, S. A1 - Ittemann, L. T1 - Selbstentzündungsverhalten von Feststoffen: Validierung der Extrapolation von Labortests mit Hilfe halbtechnischer Versuche bis 1 m³ T2 - Tagungsband zum 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik N2 - Vorgestellt wird ein 2018 gestartetes Projekt zur Überprüfung der Extrapolation von im Labormaßstab ermittelten Selbstentzündungstemperaturen auf technisch relevante Volumina. Für die Ermittlung reaktionskinetischer Daten von Feststoffschüttungen stehen eine Reihe von Untersuchungsmethoden zur Verfügung. Dies sind thermische Analysen wie z.B. die differential scanning calorimetry DSC sowie Mikrokalorimetrie zur hochgenauen Messung von Wärmeströmen, bei denen sehr geringe Probenmengen zum Einsatz kommen. In der Regel wird das Selbstentzündungsverhalten jedoch mit Hilfe von isoperibolen oder adiabaten Warmlagerungsversuchen beurteilt, hier liegen die Probenvolumina üblicherweise im Bereich von ca. 100 cm³ bis zu einigen Litern. Die Extrapolation über mehrere Größenordnungen auf technische Volumina birgt Unsicherheiten, da mit Zunahme des Lagervolumens veränderte Start- und Randbedingungen vorliegen können. Zudem besteht die Möglichkeit, dass bei in technischen Lagern vorherrschenden niedrigen Temperaturen Reaktionen ablaufen, die in Standard- Laborversuchen nicht erfasst werden aber einen wesentlichen Einfluss auf das Selbstentzündungsverhalten aufweisen können. Hauptziel des Projektes ist es daher, die im Labormaßstab vorhandenen Prüfeinrichtungen durch einen Versuchsstand zur Untersuchung von Probengrößen von bis zu 1000 dm³ zu erweitern, die Eignung (oder Nichteignung) der etablierten Methoden nachzuweisen und im Labormaßstab nicht erfassbare Einflussgrößen zu ermitteln. Zudem sollen anhand der kleinskaligen Tests Entscheidungskriterien abgeleitet werden, ob eine Extrapolation nach den derzeit üblichen Methoden zulässig ist. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Brunswick, Germany DA - 21.05.2019 KW - Spontanious ignition KW - Self-ignition KW - Minimum ignition temperature KW - Dust layers KW - Große Volumina KW - Explosionsschutz KW - Selbstentzündung KW - DSC PY - 2019 DO - https://doi.org/10.7795/210.20190521B SP - 1 EP - 15 PB - Physikalisch-Technische Bundesanstalt (PTB) AN - OPUS4-48939 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yin, Huajie A1 - B, Yang A1 - Chua, Y. Z. A1 - Szymoniak, Paulina A1 - Carta, M A1 - Malpass-Evans, R A1 - McKeown, N A1 - Harrison, W A1 - Budd, P A1 - Schick, C A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Effect of backbone rigidity on the glass transition of polymers of in-trinsic microporosity probed by fast scanning calorimetry JF - ACS Macro letters N2 - Polymers of Intrinsic Microporosity (PIMs) of high performance have developed as materials with a wide application range in gas separation and other energy-related fields. Further optimization and long-term behavior of devices with PIMs require an understanding of the structure-property relationships including physical aging. In this context the glass transi-tion plays a central role, but with conventional thermal analysis a glass transition is usually not detectable for PIMs be-fore their thermal decomposition. Fast scanning calorimetry provides evidence of the glass transition for a series of PIMs, as the time scales responsible for thermal degradation and for the glass transition are decoupled by employing ultrafast heating rates of tens of thousands K s-1. The investigated PIMs were chosen considering the chain rigidity. The estimated glass transition temperatures follow the order of the rigidity of the backbone of the PIMs. KW - Polymers of intrinsic microporosity KW - Fast scanning calormetry PY - 2019 DO - https://doi.org/10.1021/acsmacrolett.9b00482 SN - 2161-1653 VL - 8 IS - 8 SP - 1022 EP - 1028 PB - ACS Publications AN - OPUS4-48617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Musil, B. A1 - Böhning, Martin A1 - Johlitz, M. A1 - Lion, A. T1 - On the inhomogenous chemo-mechanical ageing behaviour of nitrile rubber: experimental investigations, modelling and parameter identification JF - Continuum Mechanics and Thermodynamics N2 - Elastomers are used in almost all areas of industrial applications, such as tires, engine mounts, bridge bearings, seals or coatings. During their use in operation, they are exposed to different environmental influences. These include, in particular, climatic factors such as air oxygen, high temperatures, light (UV radiation) and the influence of media (e.g. oils, fuels). A very important result of these factors is the chemical ageing of elastomers. In this case, the elastomer degenerates and changes its chemical structure in the aged regions, which leads to an irreversible change in the material properties in connection with the reduction in its usability. In this paper, chemical ageing of nitrile butadiene rubber (NBR) is investigated. Especially in case of thermo-oxidative ageing at elevated operating temperatures, the ageing processes run inhomogeneously. These effects are known as diffusion-limited oxidation (DLO) and are associated with the diffusion–reaction behaviour of atmospheric oxygen with the elastomer network. For these reasons, NBR samples are artificially aged in air and subjected to different experimental methods, which are presented and discussed. Additional results from inhomogeneous mechanical tests and permeation tests indicate the causes of the DLO-effect, show the influence of chemical ageing and are subsequently used for parameter identification in relation to the diffusion–reaction equation. A continuum-mechanical modelling approach is also presented here, which describes the finite hyperelasticity, diffusion–reaction processes as well as chemical degradation and reformation of the elastomer network. This multifield problem leads to a system of partial and ordinary differential equations and constitutive equations and is solved within the finite element method. KW - Rubber KW - Ageing KW - Gas permeability KW - DLO KW - NBR PY - 2019 DO - https://doi.org/10.1007/s00161-019-00791-1 SN - 0935-1175 SN - 1432-0959 VL - 32 IS - 1 SP - 127 EP - 146 PB - Springer CY - Heidelberg AN - OPUS4-48560 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Experimental investigation of heat flux into a fire reference package and determination of propane gas fire characteristics N2 - In order to investigate the heat fluxes over a wide range of surface temperatures during a propane gas fire test and to get information about local fire impact a fire reference package, representing the outer geometry of a specific type of transport cask for radioactive waste, was designed. A closed steel sheet cylinder with a wall thickness of 10 mm was chosen as fire reference package. The cylinder was filled with refractory insulation material and instrumented with thermocouples distributed all over the cylinder. The local steel sheet temperatures measured allow the determination of local as well as global heat fluxes as a function of time and surface temperature. With this fire reference package three open-air propane gas fire tests were performed at BAM’s open air fire test stand. The flame exposure time period was changed for the different fire tests. Furthermore, the wind conditions changed between and during the tests. Test stand parameters like wind shield location and propane gas volume flow were chosen constant for the three tests. The test results were used to determine the changes of heat flux into the fire reference package in relation to the package surface temperature. This data also allows the calculation of local characteristics of the propane gas fire as there are the flame temperature, the fire convection coefficient and the radiation exchange coefficient in a first approach. The recently conducted tests provide an initial picture of local fire characteristics of the propane gas fire test facility. The test shows that the propane gas fire covers the IAEA-fire over a wide range of surface temperatures with the chosen test stand parameters. T2 - Workshop BAM – Sandia National Laboratories CY - Berlin, Germany DA - 01.07.2019 KW - Thermal testing KW - Fire testing KW - Propane gas fire KW - IAEA KW - Convection KW - Radiation KW - Slug KW - Calorimeter PY - 2019 AN - OPUS4-48597 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Wagner, Adrian A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Auslagerungsversuche von Reinzink-Standardproben unter verschiedenen atmosphärischen Bedingungen und in Straßentunneln N2 - Der Vortrag berichtet über die Auslagerung von Standardproben nach DIN EN ISO 9223 bis 9226 aus Zink, Stahl, Kupfer und Aluminium auf den verschiedenen atmosphärischen Bewitterungsständen der Bundesanstalt für Materialforschung und -prüfung (BAM). Im Vortrag werden die Masseverluste, Korrosionsgeschwindigkeiten und Korrosivitätskategorien der Standardproben im freibewitterten und überdachten Bereich nach einem Jahr vorgestellt und Unterschiede hinsichtlich der Atmosphärenbedingungen aufgezeigt. Freibewitterte Proben zeigen dabei deutliche Unterschiede hinsichtlich ihres Korrosionsverhaltens im Vergleich zu überdachten Proben. Die ermittelten Korrosivitätskategorien sind sowohl standort- als auch materialspezifisch. T2 - 11. Arbeitskreissitzung „Zink und Zinküberzüge“ des GfKORR e. V. CY - Frankfurt a. M., Germany DA - 03.07.2019 KW - Atmosphärische Korrosion KW - Auslagerungsversuche KW - Freibewitterung KW - Korrosion PY - 2019 AN - OPUS4-48406 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Wagner, Adrian A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Auslagerungsversuche von Standardproben unter verschiedenen atmosphärischen Bedingungen N2 - Der Vortrag berichtet über die Auslagerung von Standardproben nach DIN EN ISO 9223 bis 9226 aus Zink, Stahl, Kupfer und Aluminium auf den verschiedenen atmosphärischen Bewitterungsständen der Bundesanstalt für Materialforschung und -prüfung (BAM). Im Vortrag werden die Masseverluste, Korrosionsgeschwindigkeiten und Korrosivitätskategorien der Standardproben im freibewitterten und überdachten Bereich nach einem Jahr vorgestellt und Unterschiede hinsichtlich der Atmosphärenbedingungen aufgezeigt. Freibewitterte Proben zeigen dabei deutliche Unterschiede hinsichtlich ihres Korrosionsverhaltens im Vergleich zu überdachten Proben. Die ermittelten Korrosivitätskategorien sind sowohl standort- als auch materialspezifisch. T2 - Arbeitskreissitzung „Eisen und Stahl“ des GfKORR e. V. CY - Duisburg, Germany DA - 26.06.2019 KW - Atmosphärische Korrosion KW - Auslagerungsversuche KW - Freibewitterung KW - Korrosion PY - 2019 AN - OPUS4-48344 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Rakotondrajoa, A. T1 - Machine learning based quantification of synchrotron radiation-induced X-ray fluorescence measurements - a case study JF - Machine Learning: Science and Technology N2 - In this work, we describe the use of artificial neural networks for the quantification of X-ray fluorescence measurements. The training data were generated using Monte Carlo simulation, which avoided the use of adapted reference materials. The extension of the available data set by means of an ANN to generate additional data was demonstrated. Particular emphasis was put on the comparability of simulated and experimental data and how the influence of deviations can be reduced. The search for the optimal hyperparameter, manual and automatic, is also described. For the presented case, we were able to train a network with a mean absolute error of 0.1 weight percent for the synthetic data and 0.7 weight percent for a set of experimental data obtained with certified reference materials. KW - Machine learning KW - BAMline KW - XRF KW - Synchrotron KW - Neural network PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-519008 DO - https://doi.org/10.1088/2632-2153/abc9fb SP - 1 EP - 16 PB - IOP Publishing AN - OPUS4-51900 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - de Oliveira Guilherme Buzanich, Ana T1 - Trace element analysis with synchrotron radiation N2 - Trace elements are chemical elements whose concentration in a material is very low. The exact definition depends on the application and varies for example between 100 micrograms per gram in analytical chemistry and 1000 micrograms per gram in geology. The ability to detect trace elements fast and quantitatively is of great importance in many areas of science and technology. With its high brilliance and flexibility in the excitation conditions, synchrotron radiation is an ideal tool for detecting traces even in small sample quantities. In this contribution I will report about the use of X-ray fluorescence(XRF)for qualitative and quantitative element sensitiveanalysis. In addition to the fundamentals of XRF and its quantification methods, the advantages and problems of different geometries like e.g. microXRF, Total Reflection X-ray Fluorescence (TXRF)or Double Dispersive XRF (D²XRF) will be discussed. Practical examples from BAMline from the research fields of medicine, geology and archaeometry will complete the lecture. T2 - Denver X-Ray Conference CY - Online meeting DA - 03.08.2020 KW - Synchrotron KW - BAMline KW - XRF PY - 2020 AN - OPUS4-51890 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Artificial intelligence for spectroscopy examples from BAMline N2 - Various applications for artificial intelligence in the context of spectroscopy will be presented. in particular, examples from bamline will be featured. After a short introduction to synchrotron radiation, artificial intelligence algorithms for the quantification of X-ray fluorescence measurement are discussed. In the second example, information retrieval by natural language processing is reviewed. As a last example the reconstruction of measurements with the X-ray color camera and coded apertures is presented. T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin CY - ATi Wien, Austria DA - 22.01.2020 KW - Machine learning KW - Natural language processing KW - Neural networks KW - Synchrotron KW - BAMline PY - 2020 AN - OPUS4-51891 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Von Ägypten bis Hiddensee Analyse von Gold mit Synchrotronstrahlung III N2 - Gold ist eines der sieben schon im Altertum bekannten Metalle und wurde wg. seines Glanzes und seiner Seltenheit von alters her als Tauschmittel und zur Herstellung von Schmuck benutzt. Außerdem ist es einfach bearbeitbar und weitestgehend gegen chemische Einflüsse resistent. Die Untersuchungen von Gold mit synchrotronstrahlungsangeregter Röntgenfluoreszenzanalyse sind zerstörungsfrei und geben Auskunft über die in der untersuchten Probe vorhandenen chemischen Elemente. Bei den hier vorgestellten Untersuchungen an der BAMline stehen Fragestellungen wie Herkunft, Herstellungsverfahren und Zusammengehörigkeit von Goldfunden im Vordergrund. Die verschiedenen Fragestellungen werden an einer Reihe von Beispielen erläutert die vom Wikingerschatz aus Hiddensee über die Himmelsscheibe von Nebra bis hin zu Funden aus Ägypten langen. Der Fund von Bernstorf wird ausführlich diskutiert. T2 - Vorlesung FU Berlin Einführung in die Archäometrie CY - Berlin, Germany DA - 06.11.2020 KW - Synchrotron KW - BAMline KW - XRF KW - Gold KW - Archäometrie PY - 2020 AN - OPUS4-51893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - X-Ray fluorescence with synchrotron radiation basics and applications N2 - In this talk, the features of X-ray fluorescence analysis with synchrotron radiation will be presented. First, the basics of the origin of synchrotron radiation and X-ray fluorescence analysis and the experimental setup will be discussed. Then, examples of trace element detection, micrometer resolution, and application of the X-ray color camera will be shown. T2 - HZB Photon school 2020 CY - Berlin, Germany DA - 09.03.2020 KW - Synchrotron KW - BAMline KW - XRF KW - Machine learning PY - 2020 AN - OPUS4-51894 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - de Oliveira Guilherme Buzanich, Ana T1 - SRXRF examples from the BAMline N2 - Synchrotron radiation sources with their unique properties in terms of intensity, polarization and adjustability offer a wide range of possibilities in materials research. A basic introduction about the creation and special properties of synchrotron radiation will be given. Examples of current work at BAMline, the high-energy measuring facility of the Federal Institute for Materials Research and Testing at the synchrotron BESSY, are used to illustrate the possibilities and limitations of existing measuring methods. T2 - Better with Scattering CY - Online meeting DA - 16.03.2020 KW - Synchrotron KW - BAMline KW - XRF PY - 2020 AN - OPUS4-51895 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Machine learning: examples from BAMline N2 - Various applications for artificial intelligence in the context of spectroscopy will be presented. in particular, examples from BAMline will be presented. After a short introduction to synchrotron radiation, artificial intelligence algorithms for the quantification of X-ray fluorescence measurement are discussed. In the second example, information retrieval by natural language processing is discussed. T2 - Analytical Academy CY - Online meeting DA - 02.06.2020 KW - Machine learning KW - BAMline KW - XRF KW - Synchrotron PY - 2020 AN - OPUS4-51898 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Auslagerungsversuche von Standardproben nach DIN EN ISO 9223 unter verschiedenen atmosphärischen Bedingungen N2 - Der Vortrag berichtet über die Auslagerung von Standardproben nach DIN EN ISO 9223 bis 9226 aus Zink, Stahl, Kupfer und Aluminium auf den verschiedenen atmosphärischen Bewitterungsständen der Bundesanstalt für Materialforschung und -prüfung (BAM). Im Vortrag werden die Masseverluste, Korrosionsgeschwindigkeiten und Korrosivitätskategorien der Standardproben im freibewitterten und überdachten Bereich nach einem Jahr vorgestellt und Unterschiede hinsichtlich der Atmosphärenbedingungen aufgezeigt. Freibewitterte Proben zeigen dabei deutliche Unterschiede hinsichtlich ihres Korrosionsverhaltens im Vergleich zu überdachten Proben. Die ermittelten Korrosivitätskategorien sind sowohl standort- als auch materialspezifisch. T2 - Gemeinsame Sitzung des GfKORR Arbeitskreises „Korrosionsschutz von Windenergieanlagen“ mit der Fachgruppe „Korrosionsschutz“ der WAB e.V. CY - Online meeting DA - 07.12.2020 KW - Atmosphärische Korrosion KW - Auslagerungsversuche KW - Freibewitterung KW - Korrosion PY - 2020 AN - OPUS4-51783 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Überarbeitung des GfKORR-Leitfadens „Korrosionsschutz von Offshore-Windenergieanlagen" N2 - Der Vortrag stellt den aktuellen Stand und die Diskussionsthemen für die Überarbeitung des GfKORR-Leitfadens "Korrosionsschutz von Offshore-Windenergieanlagen" vor. T2 - Gemeinsame Sitzung des GfKORR Arbeitskreises „Korrosionsschutz von Windenergieanlagen“ mit der Fachgruppe „Korrosionsschutz“ der WAB e.V. CY - Online meeting DA - 07.12.2020 KW - Leitfaden KW - Korrosionsschutz KW - Offshore-Windenergieanlagen PY - 2020 AN - OPUS4-51784 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lutz, C. A1 - Hampel, S. A1 - Ke, X. A1 - Beuermann, S. A1 - Turek, T. A1 - Kunz, U. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Fittschen, U. T1 - Evidence for redox reactions during vanadium crossover inside the nanoscopic water-body of Nafion 117 using X-ray absorption near edge structure spectroscopy JF - Journal of Power Sources N2 - A major source of capacity fade of the common vanadium redox flow battery (VRFB) is the vanadium ion transport through the separator. However, different transport models disagree significantly in the diffusion coefficient for the different V species and the influence of different transport mechanisms. The underlying hypothesis of this work is that reactions inside the membrane are partly responsible for these discrepancies. Accordingly, it was investigated if redox reactions inside the nanoscopic water body of Nafion 117 can occur. X-ray absorption near edge structure spectroscopy (XANES) was used to distinguish between the different V species inside hydrated Nafion 117 and novel PVDF-based membranes. It was validated that the speciation of vanadium can be performed using the pre-edge peak energy and intensity. The experiments were performed as follows: strips of the membrane were exposed from one site to a V3+ solution (green) and from the other site to a VO2+ solution (yellow). The ions could diffuse into the membrane from both sides. A change of color of the membrane strip was observed. The blue color in the middle of the strip indicated that VO2+ was formed where V3+ and VO2+ got in contact. Using XANES this reaction inside Nafion was proven. KW - PVDF-Based membrane KW - VRFB KW - Vanadium speciation KW - XANES KW - Nafion 117 PY - 2020 DO - https://doi.org/10.1016/j.jpowsour.2020.229176 VL - 483 SP - 229176 PB - Elsevier B.V. AN - OPUS4-51719 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Oliveira Guilherme Buzanich, Ana A1 - Kulow, Anicó A1 - Kabelitz, Anke A1 - Grunewald, C. A1 - Seidel, R. A1 - Chapartegui-Arias, Ander A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Emmerling, Franziska A1 - Beyer, S. T1 - Observation of early ZIF-8 crystallization stages with X-ray absorption spectroscopy JF - Soft Matter N2 - The present study investigates early stages of ZIF-8 crystallization up to 5 minutes post mixing of precursor solutions. Dispersive X-ray Absorption Spectroscopy (DXAS) provides a refined understanding of the evolution of the coordination environment during ZIF-8 crystallization. Linear Combination Fiting (LCF) suggests tetrakis(1-methylimidazole)zinc2+ to be a suitable and stable mononuclear structure analogue for some early stage ZIF-8 intermediates. Our results pave the way for more detailed studies on physico-chemical aspects of ZIF-8 crystallization to better control tailoring ZIF-8 materials for specific applications. KW - In-situ KW - XANES KW - ZIF-8 KW - Crystallization PY - 2020 DO - https://doi.org/10.1039/D0SM01356K SN - 1744-6848 VL - 17 IS - 2 SP - 331 EP - 334 PB - Royal Scociety of Chemistry AN - OPUS4-51723 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Outcomes of Three Large-Scale Fire Reference Tests Conducted in Propane Gas Fire Test Facility N2 - Packages for the transport of high-level radioactive material are designed to withstand severe accidents. Hypothetical severe accident conditions are defined in the IAEA Regulations for the Safe Transport of Radioactive Materials. One of these accident conditions is the thermal test, mainly consisting of a 30 minute fully engulfing 800°C pool fire or an equally severe fire test. The heat fluxes into the package depend substantially on the fire characteristics and the surface temperature of the package. Fire tests can be performed at BAM on a propane gas fire test facility. In order to investigate the heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for multiple use. The package represented the outer geometry of a specific transport cask for radioactive waste. The fire reference package is a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 1500 mm and a diameter of 1050 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Three open-air fire tests were performed in the BAM propane gas fire test facility. The flames exposure time period varied slightly for the fire tests. The wind direction as well as the wind speed were measured and changed between and during the tests. Test stand parameters such as wind shield location and propane gas volume flow were chosen constant for the three tests. The locally measured fire reference package steel sheet temperatures were used for the calculation of heat fluxes as function of time and surface temperature. The measured temperatures allowed further calculations. In a first approach effective fire characteristics of the propane gas fire, including the flame temperature, the fire convection coefficient and a radiation exchange coefficient mathematically describing the determined average heat flux over the surface temperature were calculated. T2 - Abteilungskolloquium 3.3 CY - Online meeting DA - 03.12.2020 KW - Fire KW - Heat flux KW - Convection coefficient KW - Adiabatic surface temperature KW - IAEA PY - 2020 AN - OPUS4-51778 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Uhlig, S. A1 - Frost, K. A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Zakel, S. T1 - CEQAT-DGHS interlaboratory tests for chemical safety: Validation of laboratory test methods by determining the measurement uncertainty and probability of incorrect classification including so-called “Shark profiles” T2 - Proceedings of the 13th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2020) N2 - Laboratory test results are of vital importance for correctly classifying and labelling chemicals as “hazardous” as defined in the UN Globally Harmonized System (GHS) / EC CLP Regulation or as “dangerous goods” as defined in the UN Recommendations on the Transport of Dangerous Goods. Interlaboratory tests play a decisive role in assessing the reliability of laboratory test results. Interlaboratory tests performed over the last 10 years have examined different laboratory test methods. After analysing the results of these interlaboratory tests, the following conclusions can be drawn: 1. There is a need for improvement and validation for all laboratory test methods examined. 2. To avoid any discrepancy concerning the classification and labelling of chemicals, the use of validated laboratory test methods should be state of the art, with the results accompanied by the measurement uncertainty and (if applicable) the probability of incorrect classification. This paper addresses the probability of correct/incorrect classification (for example, as dangerous goods) on the basis of the measurement deviation obtained from interlaboratory tests performed by the Centre for quality assurance for testing of dangerous goods and hazardous substances (CEQAT-DGHS) to validate laboratory test methods. This paper outlines typical results (e.g. so-called “Shark profiles” – the probability of incorrect classification as a function of the true value estimated from interlaboratory test data) as well as general conclusions and steps to be taken to guarantee that laboratory test results are fit for purpose and of high quality. T2 - 13th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2020) CY - Braunschweig, Germany DA - 27.07.2020 KW - Dangerous goods KW - Hazardous substances KW - Interlaboratory test KW - Test method KW - Validation KW - Quality assurance KW - Measurement uncertainty KW - Incorrect classification KW - Shark profile PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-515376 UR - https://oar.ptb.de/files/download/5f3e662f4c93901010006dbf DO - https://doi.org/10.7795/810.20200724 VL - 2020 SP - 50 EP - 61 PB - Open Access Repository der Physikalisch-Technischen Bundesanstalt (PTB-OAR) CY - Braunschweig AN - OPUS4-51537 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Erenberg, Marina A1 - Nehrig, Marko A1 - Bletzer, Claus A1 - Musolff, André A1 - Wille, Frank T1 - Heat Flux from Wood Filled Impact Limiter under Fire Conditions N2 - Packages for the transport of high-level radioactive material must withstand severe hypothetical accidents. Regulatory test conditions shall cover these severe accident conditions and consist of mechanical tests and a following thermal test. To withstand the mechanical tests heavy weight packages are often designed with impact limiters consisting of wood encapsulated in steel sheets. The thermal test is defined precisely in the IAEA-regulations as a 30 minute fully engulfing 800 °C fire. After the fire phase a pre-damaged impact limiter might continue burning or smouldering and influence the cask thermal behaviour with its energy release. The energy transferred from the impact limiter to the cask is of importance for the safety of transport packages. A full-scale fire test with an impact limiter of 2.3 m in diameter and filled with spruce wood was designed and performed. The impact limiter continued burning for 3 days. Energy transfer and temperature measurements were performed. T2 - 9th International Scientific Conference - wood & fire safety 2020 CY - Online meeting DA - 02.11.2020 KW - Fre KW - Smouldering KW - Wood PY - 2020 AN - OPUS4-51517 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kulow, Anicó A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe A1 - Emmerling, Franziska A1 - Hampel, S. A1 - Fittschen, U.E.A. A1 - Streli, C. A1 - Radtke, Martin T1 - Comparison of three reconstruction methods based on deconvolution, iterative algorithm and neural network for X-ray fluorescence imaging with coded apertures JF - Journal of Analytical Atomic Spectrometry N2 - X-ray imaging methods are used in many fields of research, as they allow a non-destructive Investigation of the elemental content of various samples. As for every imaging method, for X-ray imaging the optics are of crucial importance. However, these optics can be very expensive and laborious to build, as the requirements on surface roughness and precision are extremely high. Angles of reflection and refraction are often in the range of a few mrad, making a compact design hard to achieve. In this work we present a possibility to simplify X-ray imaging. We have adapted the coded aperture method, a high energy radiation imaging method that has its origins in astrophysics, to full field X-ray fluorescence imaging. In coded aperture imaging, an object is projected through a known mask, the coded aperture, onto an area sensitive detector. The resulting image consists of overlapping projections of the object and a reconstruction step is necessary to obtain the information from the recorded image. We recorded fluorescence images of different samples with an energy-dispersive 2D detector (pnCCD) and investigated different reconstruction methods. With a small coded aperture with 12 holes we could significantly increase the count rate compared to measurements with a straight polycapillary optic. We show that the reconstruction of two different samples is possible with a deconvolution approach, an iterative algorithm and a neural network. These results demonstrate that X-ray fluorescence imaging with coded apertures has the potential to deliver good results without scanning and with an improved count rate, so that measurement times can be shortened compared to established methods. KW - X-ray fluorescence imaging KW - Coded apertures KW - Imaging KW - Elemental mapping KW - Image reconstruction PY - 2020 DO - https://doi.org/10.1039/d0ja00146e VL - 35 IS - 7 SP - 1423 EP - 1434 PB - Royal Society of Chemistry CY - United Kingdom AN - OPUS4-51518 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Fire reference package - Results of large-scale fire tests N2 - Packages for the transport of high-level radioactive material are designed to withstand severe accidents. Hypothetical severe accident conditions are defined in the IAEA Regulations for the Safe Transport of Radioactive Materials. One of these accident conditions is the thermal test, mainly consisting of a 30 minute fully engulfing 800°C pool fire or an equally severe fire test. The heat fluxes into the package depend substantially on the fire characteristics and the surface temperature of the package. Fire tests can be performed at BAM on a propane gas fire test facility. In order to investigate the heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for multiple use. The package represented the outer geometry of a specific transport cask for radioactive waste. The fire reference package is a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 1500 mm and a diameter of 1050 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Three open-air fire tests were performed in the BAM propane gas fire test facility. The flames exposure time period varied slightly for the fire tests. The wind direction as well as the wind speed were measured and changed between and during the tests. Test stand parameters such as wind shield location and propane gas volume flow were chosen constant for the three tests. The locally measured fire reference package steel sheet temperatures were used for the calculation of heat fluxes as function of time and surface temperature. The measured temperatures allowed further calculations. In a first approach effective fire characteristics of the propane gas fire, including the flame temperature, the fire convection coefficient and a radiation exchange coefficient mathematically describing the determined average heat flux over the surface temperature were calculated. T2 - IRSN-BAM Symposium - Safety of Transport and Storage Packages CY - Online meeting DA - 19.11.2020 KW - Fire reference KW - Calorimetric test KW - Propane KW - Heat flux KW - Propane gas fire test facility PY - 2020 AN - OPUS4-51686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Grengg, C. A1 - Gluth, Gregor A1 - Mittermayr, F. A1 - Ukrainczyk, N. A1 - Bertmer, M. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Leis, A. A1 - Dietzel, M. T1 - Deterioration mechanism of alkali-activated materials in sulfuric acid and the influence of Cu: A micro-to-nano structural, elemental and stable isotopic multi-proxy study JF - Cement and concrete research N2 - In this study, a multi-proxy approach combining 29Si, 27Al and 1H MAS-NMR, FEG-EPMA, XANES at the Cu K-edge and XRD analytics with hydrochemical tools such as ICP-OES analyses, oxygen-isotope signatures, and thermodynamic modelling was applied to K-silicate-activated metakaolin specimens - with and without CuSO4·5H2O addition - exposed to sulfuric acid at pH = 2 for 35 days. The results revealed a multistage deterioration mechanism governed by (i) acid diffusion, (ii) leaching of K-A-S-H, (iii) microstructural damage related to precipitation of expansive (K,Ca,Al)-sulfate-hydrate phases (iv) complete dissolution of the K-A-S-H framework, (v) and formation of silica gel in the outermost corroded regions. Copper ions were mainly located in layered spertiniite-chrysocolla-like phases in the as-cured materials. The results demonstrate an overall negative effect of Cu addition on chemical material durability, implying that the reported higher durability of Cu-doped AAM in biocorrosion environments can be best explained by bacteriostatic effects. KW - Alkali-activated materials KW - Acid resistance KW - Microbially induced corrosion KW - MIC PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-520567 DO - https://doi.org/10.1016/j.cemconres.2021.106373 SN - 0008-8846 VL - 142 SP - 1 EP - 15 PB - Elsevier CY - Oxford AN - OPUS4-52056 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit - Schlussfolgerungen T2 - Beiträge zum 15. BAM-PTB-Kolloquium im Volltext N2 - Die Ursachen für Chemikalienunfälle können vielfältig sein. Prävention beginnt bereits im Prüflabor, wenn Chemikalien auf ihre gefährlichen Eigenschaften getestet werden. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der Prüfmethode und richtige Durchführung der Prüfung im Laboratorium müssen sich Sicherheitsfachkräfte, Transporteure oder Händler verlassen können. Anhand der in den letzten 10 Jahren im Rahmen des CEQAT-DGHS von BAM und PTB durchgeführten Ringversuche (RV) wird gezeigt, dass bei allen bisher untersuchten Prüfmethoden ein Verbesserungsbedarf besteht. Die RV müssen daher zunächst auf die Methodenverbesserung und -validierung abzielen und nicht auf Leistungstests. Das Labormanagement und die praktische Durchführung der Prüfung sind in vielen Laboratorien verbesserungsbedürftig. Der Begriff „Erfahrung der Prüfer“ ist kritisch zu sehen: Eine „lange Erfahrung mit vielen Prüfungen“ ist nicht unbedingt ein Garant für richtige Ergebnisse. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 21.05.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung PY - 2019 UR - https://www.ptb.de/cms/index.php?id=18763 DO - https://doi.org/10.7795/210.20190521M SP - 1 EP - 8 PB - Physikalisch-Technische Bundesanstalt (PTB) CY - Braunschweig AN - OPUS4-49489 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Zakel, S. A1 - Schröder, Volkmar A1 - Askar, Enis A1 - Gabel, D. A1 - Hirsch, W. A1 - Kleinert, J. A1 - Krause, U. A1 - Krietsch, Arne A1 - Meistes, J. A1 - Sachtleben, A. A1 - Schmidt, Martin T1 - Sicherheitstechnische Kenngrößen des Explosionsschutzes von hybriden Stoffgemischen - Normungsfähige Bestimmungsverfahren T2 - Tagungsband der 14. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - In diesem Verbundvorhaben werden standardisierte Messverfahren für hybride Gemische erarbeitet, die der Bestimmung sicherheitstechnischer Kenngrößen des Explosionsschutzes dienen. Unter einem hybriden Gemisch wird dabei ein mehrphasiges System aus Brenngas oder brennbarem Dampf, sowie Luft und brennbarem Staub verstanden. Die Veröffentlichung der Ergebnisse erfolgt in einem Abschlussbericht und als DIN-Spezifikation (DIN SPEC). Diese DIN SPEC versetzt Prüfinstitute und Industrie in die Lage, Explosionsgefahren beim Betrieb technischer Anlagen mit hybriden Gemischen einzuschätzen und damit Prozesse sowohl sicherer als auch effizienter zu steuern. Dieses Projekt wird im Rahmen des WIPANOProgramms (Wissens- und Technologietransfer durch Patente und Normen) vom BMWi gefördert. T2 - 14. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 07.11.2019 KW - Explosionsschutz KW - Sicherheitstechnische Kenngrößen KW - Hybride Gemische KW - Normung PY - 2019 SN - 978-3-89746-220-5 SP - 73 CY - Frankfurt am Main AN - OPUS4-49954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Wu, Dejian A1 - Zhao, P. A1 - Tan, X. A1 - Huang, W. A1 - Qianc, X. T1 - Minimum explosion concentrations of coal dusts with CH4/H2/CO below the gas lower explosion limit JF - Fuel N2 - A 20-L spherical explosion chamber was used to investigate the explosion characteristics of dust clouds in air with the presence of flammable gas which is lower than its lower explosion limit (LEL). including minimum explosion concentration (MEC) of dust. Explosion pressure (Pex) and explosion pressure rise (dp/dt)ex). Two dust samples (anthracite coal, bituminous coal) and were three flammable gases (CH4, H2 and CO) were tested. Experimental results showed that the explosion of hybrid mixtures occurs when both dust and gas concentrations are lower than the LEL/MEC of the single substances. Meanwhile. all flammable gases with different volume fractions have distinct effects on the MEC. Pex and (dp/dt)ex of the dust samples. With the increase of the flammable gas concentration. either the Pex and (dp/dt)ex increase or the MEC decreases for all the hybrid mixtures of both two dust samples. At the same concentration of coal dusts. the addition of CH4 promotes higher explosion risks than the other two flammable gases. The distribution of (dp/dt)ex is quite different with the restricted area defined by empirical formulas. These results improve our understanding of the explosion behaviour and the explosion risk of hybrid dust-gas mixtures in air. KW - Dust explosions KW - Gas explosions KW - Minimum explosible concentration KW - Lower explosion limit KW - Hybrid mixtures PY - 2020 DO - https://doi.org/10.1016/j.fuel.2019.116401 SN - 0032-5910 VL - 260 SP - UNSP 116401 PB - Elsevier Sci. Ltd. AN - OPUS4-49956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Yin, Huajie A1 - Chua, Yeong Zen A1 - Yang, Bin A1 - Schick, Christoph A1 - Schönhals, Andreas T1 - The glass transition temperature of Polymers of Intrinsic Microporosity (PIMs) as determined by fast scanning calorimetry N2 - Polymers of intrinsic microporosity (PIMs) have recently emerged as novel materials for a broad range of high-performance applications from gas separation to electronic devices. The very rigid, contorted polymer chains show only limited molecular mobility and therefore pack inefficiently giving rise to intrinsic microporosity with pore sizes generally smaller than 1 nm resulting in BET surface areas larger than 700 m2/g. Using conventional thermal analysis techniques, no glass transition temperature (Tg) of PIMs could be unambiguously detected up to now. Employing fast scanning calorimetry (FSC) based on a one chip sensor, decoupling the time scales responsible for the glass transition and the thermal decomposition is a reliable strategy to overcome this limitation. The FSC device is capable to heat and cool a small sample (ng-range) with ultrafast rates of several ten thousand K/s. Evidence of a glass transition is obtained for a series of PIMs with different chain rigidities. Local small-scale fluctuations are held responsible for the glass transition of highly rigid PIMs rather than segmental motions as in conventional polymers. T2 - International Polymer Processing Society (PPS) - Europe-Africa 2019 Regional Conference (PPS2019) CY - Pretoria, South Africa DA - 18.11.2019 KW - Polymers KW - Polymers of intrinsic microporosity KW - Glass transition KW - Fast scanning calorimetry PY - 2019 AN - OPUS4-49957 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bruchno, Martin T1 - Konzipierung eines Versuchsaufbaus und Prüfverfahrens zur quantitativen Erfassung der luftübertragenen Partikelfreisetzung aus Gefahrgutsäcken nach stoßartiger Belastung N2 - Täglich werden mehrere tausend Tonnen in Säcken verpackter Gefahrgüter über die Straßen transportiert. Laut den internationalen Gefahrgutvorschriften für den innerstaatlichen und grenzüberschreitenden Verkehr ADR müssen Gefahrgutsäcke aus Papier „staubdicht“ sein. Die Autobahnpolizei Münster wies bei einem Vortrag in der BAM darauf hin, dass im Rahmen polizeilicher LKW-Kontrollen Ladeflächen voller Staub vorgefunden wurden, ohne dass ein Defekt an einem Gefahrgutsack festgestellt werden konnte. Ziel der Arbeit war es, eine Prüfkammer zu entwickeln, welche in der Lage ist, nach Fallversuchen mit Gefahrgutsäcken aus Papier den freigesetzten luftgetragenen Staub zu bestimmen. Eine anschließende Bewertung soll die gesundheitlichen Gefahren des entstandenen Aerosols aufzeigen. Durch die Auswertung erster Fallversuche wurde exemplarisch die „Dichtheit“ vorhandener Gefahrgutsäcke bestimmt und die Fraktionen der entstandenen Aerosole wurden mit den Arbeitsplatzgrenzwerten verglichen. T2 - Abteilungskolloquium der Abteilung 3, BAM CY - Berlin, Germany DA - 05.12.2019 KW - Gefahrgutverpackungen KW - Gefahrgutsäcke KW - Dichtheit PY - 2019 AN - OPUS4-49951 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit – Entwicklung von Verfahren zur Verifizierung der Prüfapparatur am Beispiel der Prüfmethode UN Test N.5 T2 - Beiträge zum 15. BAM-PTB-Kolloquium im Volltext N2 - Prävention beginnt im Prüflabor, wenn Chemikalien auf ihre gefährlichen Eigenschaften getestet werden. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der Prüfmethode und richtige Durchführung der Prüfung im Laboratorium müssen sich Sicherheitsfachkräfte, Transporteure oder Händler verlassen können. Anhand der in den letzten 10 Jahren im Rahmen des CEQAT-DGHS von BAM und PTB durchgeführten Ringversuche (RV) wird gezeigt, dass bei allen bisher untersuchten Prüfmethoden ein Verbesserungsbedarf besteht. Die RV müssen daher zunächst auf die Methodenverbesserung und -validierung abzielen und nicht auf Leistungstests. Das Labormanagement und die praktische Durchführung der Prüfung sind in vielen Laboratorien verbesserungsbedürftig. Der Begriff „Erfahrung der Prüfer“ ist kritisch zu sehen: Eine „lange Erfahrung mit vielen Prüfungen“ ist nicht unbedingt ein Garant für richtige Ergebnisse. Bei der Prüfung der gefährlichen Eigenschaften von Chemikalien sind Referenzmaterialen auf Grund der Instabilität in der Regel nicht verfügbar. Für Prüflaboratorien sind RV daher eine Alternative bei der Qualitätssicherung. RV sind jedoch aufwendig und können nur in relativ großen Zeitabständen durchgeführt werden. Es sind deshalb Verfahren zur Verifizierung z. B. der in den Laboratorien verwendeten Prüfapparaturen zu entwickeln. Die Entwicklung von Verifizierungsverfahren wird am Bespiel der Prüfmethode UN Test N.5 demonstriert. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Braunschweig, Germany DA - 21.05.2019 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung KW - Verifizierung PY - 2019 UR - https://www.ptb.de/cms/index.php?id=18763 DO - https://doi.org/10.7795/210.20190521E SP - 1 EP - 10 CY - Braunschweig AN - OPUS4-49495 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lüth, Peter A1 - Frost, K. A1 - Kurth, Lutz A1 - Malow, Marcus A1 - Michael-Schulz, Heike A1 - Schmidt, Martin A1 - Schulte, Petra A1 - Uhlig, S. A1 - Zakel, S. T1 - CEQAT-DGHS Interlaboratory Test Programme for Chemical Safety - Need of Test Methods Validation JF - CET CHEMICAL ENGINEERING TRANSACTIONS N2 - Safety experts, manufacturers, suppliers, importers, employers or consumers must be able to rely on the validity of safety-related test methods and on correct test results and assessments in the laboratory. Via the eChemPortal lots of data from the REACH registration dossiers are available. However, the quality and correctness of the information remains in the responsibility of the data submitter. Unfortunately, we found more or less appropriate information on physicochemical properties and concluded that more quality or adequacy of any data submitted will be needed. Interlaboratory tests play a decisive role in assessing the reliability of test results. Interlaboratory tests on different test methods have been performed by Bundesanstalt für Materialforschung und –prüfung (BAM) and Physikalisch-Technische Bundesanstalt (PTB) in collaboration with the QuoData GmbH during the last 10 years. Significant differences between the results of the participating laboratories were observed in all interlaboratory tests. The deviations of the test results were not caused only by laboratory faults but also by deficiencies of the test method. In view of the interlaboratory test results the following conclusions can be drawn: • To avoid any discrepancy on classification and labelling of chemicals it should become state of the art to use validated test methods and the results accompanied by the measurement uncertainty. • A need for improvement is demonstrated for all examined test methods. Thus, interlaboratory tests shall initially aim at the development, improvement and validation of the test methods and not on proficiency tests. • The laboratory management and the practical execution of the tests need to be improved in many laboratories. • The term "experience of the examiner" must be seen critically: A "long experience with many tests" is not necessarily a guarantee for correct results. T2 - 16th International Symposium on Loss Prevention and Safety Promotion in the Process Industries and accompanying exhibition. Loss prevention 2019 CY - Delft, The Netherlands DA - 16.06.2019 KW - Dangerous goods KW - Hazardous substances KW - Round robin test KW - Interlaboratory comparison KW - Test method KW - Validation KW - Quality assurance PY - 2019 UR - https://www.aidic.it/cet/19/77/001.pdf SN - 978-88-95608-74-7 DO - https://doi.org/10.3303/CET1977001 SN - 2283-9216 VL - 77 SP - 1 EP - 6 PB - Italian Association of Chemical Engineering AN - OPUS4-49496 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten an Zink - Eine innovative Prüfmethodik N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität von atmosphärisch gebildeten Deckschichten erlauben. In diesem Beitrag wird anhand verschiedener Untersuchungen an Reinzink der Mehrwert von gelartigen Elektrolyten für die Korrosionsforschung und -prüfung verdeutlicht. Darüber hinaus werden neue Erkenntnisse zur Deckschichtbildung von Zink unter atmosphärischen Bedingungen vorgestellt. T2 - GfKORR-Jahrestagung 2019 CY - Frankfurt a. M., Germany DA - 12.11.2019 KW - Zink KW - Gelartige Elektrolyte KW - Korrosionsuntersuchungen KW - Deckschichtbildung PY - 2019 AN - OPUS4-49641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heise, Svenja A1 - Heyn, A. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten an Zink - Eine innovative Prüfmethodik T2 - Tagungsband zur GfKORR-Jahrestagung 2019 N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität von atmosphärisch gebildeten Deckschichten erlauben. In diesem Beitrag wird anhand verschiedener Untersuchungen an Reinzink der Mehrwert von gelartigen Elektrolyten für die Korrosionsforschung und -prüfung verdeutlicht. Darüber hinaus werden neue Erkenntnisse zur Deckschichtbildung von Zink unter atmosphärischen Bedingungen vorgestellt. T2 - GfKORR-Jahrestagung 2019 CY - Frankfurt a. M. DA - 12.11.2019 KW - Zink KW - Gelartige Elektrolyte KW - Korrosionsuntersuchungen KW - Deckschichtbildung PY - 2019 SN - 978-3-935406-71-0 SP - 53 EP - 64 AN - OPUS4-49642 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maack, Stefan A1 - Bertovic, Marija A1 - Radtke, Martin A1 - et al., ED - Wahlster, Wolfgang ED - Winterhalter, Christoph T1 - Deutsche Normungsroadmap künstliche Intelligenz N2 - Rund ein Jahr haben DIN und DKE in einem gemeinsamen Projekt mit dem Bundesministerium für Wirtschaft und Energie und zusammen mit ca. 300 Fachleuten aus Wirtschaft, Wissenschaft, öffentlicher Hand und Zivilgesellschaft an der Normungsroadmap Künstliche Intelligenz gearbeitet. Eine hochrangige Steuerungsgruppe unter dem Vorsitz von Prof. Wolfgang Wahlster hat die Erarbeitung koordiniert und begleitet. Ziel der Roadmap ist die frühzeitige Entwicklung eines Handlungsrahmens für die Normung und Standardisierung, der die internationale Wettbewerbsfähigkeit der deutschen Wirtschaft unterstützt und europäische Wertmaßstäbe auf die internationale Ebene hebt.(...) KW - Künstliche Intelligenz KW - Normung KW - Roadmap PY - 2020 UR - https://www.din.de/resource/blob/772438/ecb20518d982843c3f8b0cd106f13881/normungsroadmap-ki-data.pdf VL - 2020 SP - 1 EP - 232 AN - OPUS4-51733 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Climent Terol, Estela A1 - Gotor, Raul A1 - Tobias, Charlie A1 - Bell, Jérémy A1 - Martin-Sanchez, Pedro A1 - Rurack, Knut T1 - Dip Sticks Embedding Molecular Beacon-Functionalized Core−Mesoporous Shell Particles for the Rapid On-Site Detection of Microbiological Fuel Contamination JF - ACS Sensors N2 - Microbial contamination of fuels by fungi and bacteria presents risks of corrosion and fuel system fouling. In this work, a rapid test for the determination of microbial genomic DNA from aqueous fuel extracts is presented. It combines test strips coated with polystyrene core/mesoporous silica shell particles, to the surface of which modified fluorescent molecular beacons are covalently grafted, with a smartphone detection system. In the hairpin loop, the beacons incorporate a target sequence highly conserved in all bacteria, corresponding to a fragment of the 16S ribosomal RNA gene, which is also present to a significant extent in the 18S rRNA gene of fungi, allowing for broadband microbial detection. In the developed assay, the presence of genomic DNA extracts from bacteria and fungi down to ca. 20−50 μg L−1 induced a distinct fluorescence response. The optical read-out was adapted for on-site monitoring by combining a 3D-printed case with a conventional smartphone, taking advantage of the sensitivity of contemporary complementary metal oxide semiconductor (CMOS) detectors. Such an embedded assembly allowed to detect microbial genomic DNA in aqueous extracts down to ca. 0.2−0.7 mg L−1 and presents an important step toward the on-site uncovering of fuel contamination in a rapid and simple fashion. KW - Bacteria KW - Fungi KW - Rapid test KW - Fluorescence KW - Smartphone KW - Biofouling PY - 2020 DO - https://doi.org/10.1021/acssensors.0c01178 SN - 2379-3694 VL - 6 IS - 1 SP - 27 EP - 34 PB - American Chemical Society CY - Washington, DC AN - OPUS4-51956 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Erdt, René A1 - Gödde, M. A1 - Salg, St. T1 - Validierung der Extrapolation von Labortests mit Hilfe halbtechnischer Versuche bis 1 m3 und thermoanalytischer Methoden T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube 2020" N2 - Zur Bestimmung der reaktionskinetischen Daten von Schüttgütern und iur Vorhersage des Selbstentzündungsverhaltens großer.Lager kommen verschiedene Analysemethoden zum Einsatz. Dabei handelt es sich .um thermische Verfahren wie die Differential-Scanning- Kalorimetrie OS(. die simultane Thermoanalyse STA sowie die Mikrokalorimetrie zur hochpräzisen Messung von Wärmeströmen. Für die oben genannten Methoden werden sehr kleine Probenmengen verwendet. In der Regel wird das Selbstentzündungsverhalten jedoch mit Hilfe von isoperibolen oder adiabatischen Warmlagerungsversuchen ermittelt: die Probenvolumina liegen hier meist im Bereich von ca. 100 cm3 bis zu mehreren Litern. Die Extrapolation auf technisch relevante Volumina birgt jedoch erhebliche Unsicherheiten. Diese Unsicherheiten zu identifizieren und zu reduzieren ist das Hauptziel eines 2018 gestarteten Forschungsprojekts. Dies soll in erster Linie durch den Aufbau eines Versuchsstandes zur Untersuchung von Probengrößen von bis zu. 1000 dm 3 geschehen. Sowohl Warmlagerungsversucl1e im Labormaßstab als auch thermoanalytische Verfahren. die mit Hilfe verschiedener Methoden ausgewertet werden. lassen, einzeln betrachtet. häufig nur bedingt zuverlässige Aussagen über das Selbstentzündungsverhalten von großen Schüttgütern zu. Es werden komplette Versuchsreihen mit allen genannten Prüfverfahren vorgestellt und Aussagen zur Anwendbarkeit der Extrapolationsmethoden diskutiert. T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube 2020" CY - Online meeting DA - 04.11.2020 KW - Selbstentzündung KW - Kinetische Daten KW - Halbtechnische Versuche KW - Thermoanalytische Methoden PY - 2020 SN - 978-3-18-092376-5 SP - 17 EP - 36 AN - OPUS4-52443 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Process- and material-related causes for corrosion defects on stainless steels N2 - The presentation provides information on process- and material-related causes for corrosion on stainless steels. The influence of surface grinding is discussed. Methods for enhancing the corrosion resistance of stainless steels are shown. T2 - 3M Webinar “Technologies, Tools & Tips to avoid corrosion on Stainless Steel” CY - Online meeting DA - 25.02.2021 KW - Stainless steel KW - Corrosion KW - Grinding processes PY - 2021 AN - OPUS4-52358 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Prozess- und materialbedingte Ursachen für Korrosionserscheinungen an nichtrostenden Stählen N2 - Der Vortrag beleuchtet prozess- und materialbedingte Ursachen für Korrosionserscheinungen an nichtrostenden Stählen. Der Fokus liegt auf dem Einfluss von Schleifprozessen. Es werden Maßnahmen erläutert, um die Korrosionsbeständigkeit der Oberfläche zu verbessern. T2 - 3M Webinar „Schleiftechnologien zur Korrosionsvermeidung und Produktivitätssteigerung“ CY - Online meeting DA - 25.03.2021 KW - Nichtrostender Stahl KW - Korrosion KW - Schleifprozesse PY - 2021 AN - OPUS4-52360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Würth, Christian A1 - Kaiser, Martin A1 - Wilhelm, Stefan A1 - Grauel, Bettina A1 - Hirsch, Th. A1 - Resch-Genger, Ute T1 - Excitation power dependent population pathways and absolute quantum yields of upconversion nanoparticles in different solvents JF - Nanoscale N2 - The rational design of brighter upconversion nanoparticles (UCNPs) requires a better understanding of the radiationless deactivation pathways in these materials. Here, we demonstrate the potential of excitation power density (P)-dependent studies of upconversion (UC) luminescence intensities, slope factors, and absolute quantum yields (ΦUC) of popular β-NaYF4:20% Yb3+,2% Er3+ UCNPs of different surface chemistries in organic solvents, D2O, and water as a tool to gain deeper insight into the UC mechanism including population and deactivation pathways particularly of the red emission. Our measurements, covering a P regime of three orders of magnitude, reveal a strong difference of the P-dependence of the ratio of the green and red luminescence bands (Ig/r) in water and organic solvents and P-dependent population pathways of the different emissive energy levels of Er3+. In summary, we provide experimental evidence for three photon processes in UCNPs, particularly for the red emission. Moreover, we demonstrate changes in the excited population dynamics via bi- and triphotonic processes dependent on the environment, surface chemistry, and P, and validate our findings theoretically KW - Upconverion KW - Quantum Yield KW - Photo physics PY - 2017 UR - http://pubs.rsc.org/en/content/articlepdf/2017/nr/c7nr00092h DO - https://doi.org/10.1039/c7nr00092h SN - 2040-3364 SN - 2040-3372 VL - 9 IS - 12 SP - 4283 EP - 4294 PB - The Royal Society of Chemistry AN - OPUS4-39849 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Resch-Genger, Ute A1 - Pilch, A. A1 - Würth, Christian A1 - Kaiser, Martin A1 - Wawrzynczyk, D. A1 - Kurnatowska, M. A1 - Arabasz, S. A1 - Prorok, K. A1 - Samoc, M. A1 - Strek, W. A1 - Bednarkiewicz, A. T1 - Shaping luminescent properties of Yb3+ and Ho3+ co-doped upconverting core-shell ß-NaYF4 nanoparticles by dopant distribution and spacing JF - Small N2 - At the core of luminescence color and lifetime Tuning of rare earth doped upconverting nanoparticles (UCNPs), is the understanding of the Impact of the particle architecture for commonly used sensitizer (S) and activator (A) Ions. In this respect, a series of core@Shell NaYF4 UCNPs doped with Yb3+ and Ho3+ ions are presented here, where the same dopant concentrations are distributed in different particle architectures following the scheme: YbHo core and YbHo@..., ...@YbHo, Yb@Ho, Ho@Yb, YbHo@Yb, and Yb@YbHo core-Shell NPs. As refealed by quantitative steady-state and time-resolved luminescence studies, the relative spatial Distribution of the A and S ions in the UCNPs and their protection from surface quenching has a critical Impact on ther luminescence characteristics. Although the increased amount of Yb3+ Ions boosts UCNP Performance by amplifying the Absorption, the Yb3+ ions can also efficiently dissipate the energy stored in the material through energy Migration to the surface, thereby reducing the Overall energy Transfer Efficiency to the activator ions. The results provide yet another proof that UC Phosphor chemistry combined with materials Engineering through intentional core@shell structures may help to fine-tune the luminescence Features of UCNPs for their specific future applications in biosensing, bioimaging, photovoltaics, and Display technologies. KW - Fluorescence KW - Upconversion KW - NIR KW - Nonlinear KW - Nanoparticle KW - Surface chemistry KW - Quantum yield KW - Liftetime KW - Nanocrystal KW - Lanthanide KW - Ho(III) KW - Yb(III) KW - Mechanism KW - Absolute flourescence KW - Excitation power density dependence PY - 2017 DO - https://doi.org/10.1002/smll.201701635 SN - 1613-6810 VL - 13 IS - 47 SP - 1701635, 1 EP - 13 PB - WILEY-VCH Verlag GmbH & co. KGaA CY - Weinheim AN - OPUS4-43629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Entwicklung der Arbeiten JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 64 EP - 65 PB - Verl. Chemie CY - Berlin AN - OPUS4-43633 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Prüfung von Gasmasken JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 65 EP - 67 PB - Verl. Chemie CY - Berlin AN - OPUS4-43634 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Entwicklung der Arbeiten JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 64 EP - 65 PB - Verl. Chemie CY - Berlin AN - OPUS4-43609 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Prüfung von Gasmasken JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 65 EP - 67 PB - Verl. Chemie CY - Berlin AN - OPUS4-43610 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Prüfung von Filtereinsätzen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 67 EP - 68 PB - Verl. Chemie CY - Berlin AN - OPUS4-43635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Prüfung von Stoffen auf Durchlässigkeit gegen Lost JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 68 EP - 69 PB - Verl. Chemie CY - Berlin AN - OPUS4-43639 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Prüfung von Abdichtungsmitteln JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 69 EP - 69 PB - Verl. Chemie CY - Berlin AN - OPUS4-43640 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Verschiedene Untersuchungen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 69 EP - 72 PB - Verl. Chemie CY - Berlin AN - OPUS4-43641 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten auf dem Gebiete des Gasschutzes - Prüfung von Handfeuerlöschern JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 72 EP - 72 PB - Verl. Chemie CY - Berlin AN - OPUS4-43643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Entwicklung der Arbeiten auf dem Gebiet des Azetylens JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 73 EP - 73 PB - Verl. Chemie CY - Berlin AN - OPUS4-43645 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Nachprüfung der Betriebssicherheit der im Verkehr befindlichen Wasservorlagen für Niederdruckapparate und Erweiterung des Prüfverfahrens für Hochdruck-Wasservorlagen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 73 EP - 78 PB - Verl. Chemie CY - Berlin AN - OPUS4-43647 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Untersuchungen über gelöstes Azetylen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 78 EP - 79 PB - Verl. Chemie CY - Berlin AN - OPUS4-43649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Klärung der Zusammenhänge der durch fließende Gase bewirkten elektrostatischen Aufladung JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 79 EP - 82 PB - Verl. Chemie CY - Berlin AN - OPUS4-43651 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Experimentelle Untersuchungen zur Frage des Druckes in Hochdruckazetylenanlagen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 82 EP - 88 PB - Verl. Chemie CY - Berlin AN - OPUS4-43652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Untersuchungen über Azetylenspaltung JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 87 EP - 88 PB - Verl. Chemie CY - Berlin AN - OPUS4-43655 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Auftreten von Stickoxyden und Kohlenoxyd beim Schweißen und Schneiden JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 88 EP - 90 PB - Verl. Chemie CY - Berlin AN - OPUS4-43657 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Versuche über Vinylazetylen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 90 EP - 94 PB - Verl. Chemie CY - Berlin AN - OPUS4-43659 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Aufstellung bzw. Abänderung von Lieferbedingungen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 53 EP - 57 PB - Verl. Chemie CY - Berlin AN - OPUS4-43600 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Guerra, M. F. A1 - Fischer, M. A1 - Radtke, Martin A1 - Reinholz, Uwe T1 - Inca figurines from the Ethnologisches Museum in Berlin: an analytical study of some typical and atypical productions JF - Bulletin de l’Institut Français d’Études Andines N2 - Fourteen hollow and one cast anthropomorphic and zoomorphic figurines produced in Incan times for ritual offerings from the Ethnologisches Museum in Berlin were selected to investigate the technologies and alloys used for their fabrication with portable optical microscopy and non-destructive XRF elemental analysis. This group of gold and silver figurines includes typical specimens of the Inca production, such as the four silver figurines from the Island Coati in Lake Titicaca and the two gold figurines from Pachacamac, as well as specimens that are seldom present in collections, which makes them atypical. In addition to the tall figurines with atypical hair or standing pose, one bicolour figurine half silver, half gold) and another with coloured inlays were included in this study for comparison. The large majority of the silver specimens are made from very high quality alloys and the gold figurines are made from alloys containing low copper contents and silver ranging from 30wt% to 52wt%. KW - Gold KW - pXRF KW - Inca PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-436015 DO - https://doi.org/10.4000/bifea.8232 SN - 0303-7495 VL - 46 IS - 1 SP - 221 EP - 251 PB - Institut Français d'Études Andines AN - OPUS4-43601 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Untersuchungen verschiedener Art - Explosionssichere Schmiermittel zum Schmieren von Sauerstoffarmaturen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 57 EP - 57 PB - Verl. Chemie CY - Berlin AN - OPUS4-43602 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Untersuchungen verschiedener Art - Verhalten von Dichtungsmaterialien gegen Sauerstoff JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 57 EP - 58 PB - Verl. Chemie CY - Berlin AN - OPUS4-43603 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Untersuchungen verschiedener Art - Schutz der Innenwände von Azetylenentwicklern JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 58 EP - 60 PB - Verl. Chemie CY - Berlin AN - OPUS4-43604 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Untersuchungen verschiedener Art - Erhebungen über synthetischen Kautschuk JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 60 EP - 61 PB - Verl. Chemie CY - Berlin AN - OPUS4-43605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Untersuchungen verschiedener Art - Mitarbeit an der Konstruktion der T-Mine n.A. JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 61 EP - 61 PB - Verl. Chemie CY - Berlin AN - OPUS4-43606 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Untersuchungen verschiedener Art - Sonstige Untersuchungen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 61 EP - 64 PB - Verl. Chemie CY - Berlin AN - OPUS4-43607 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Schweißtechnik - Wärmewirkung der Azetylen-Sauerstoff-Flamme bei verschiedenen Ausströmungsgeschwindigkeiten des Brenngasgemisches JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 115 EP - 118 PB - Verl. Chemie CY - Berlin AN - OPUS4-43688 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Untersuchung von Gasen zwecks Aufnahme in die Polizeiordnung, betr. den Verkehr mit verflüssigten und verdichteten Gasen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 94 EP - 95 PB - Verl. Chemie CY - Berlin AN - OPUS4-43664 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Untersuchung eines Gasanzeigers JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 95 EP - 96 PB - Verl. Chemie CY - Berlin AN - OPUS4-43673 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Untersuchung von sauerstoffabgebenden Massen für unabhängige Gasschutzgeräte JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 96 EP - 96 PB - Verl. Chemie CY - Berlin AN - OPUS4-43674 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über technische Gase, insbesondere Azetylen - Prüfung von Benzinabscheidern JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 96 EP - 97 PB - Verl. Chemie CY - Berlin AN - OPUS4-43675 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Schweißtechnik - Zusatzstoffe für die Azetylenschweißung von Stahl JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 97 EP - 105 PB - Verl. Chemie CY - Berlin AN - OPUS4-43677 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Schweißtechnik - Prüfung von Saugbrennern JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 105 EP - 110 PB - Verl. Chemie CY - Berlin AN - OPUS4-43680 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Schweißtechnik - Leuchtgaszusatz zum Azetylen beim Schweißen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1935 SN - 0368-1785 VL - XIV SP - 110 EP - 114 PB - Verl. Chemie CY - Berlin AN - OPUS4-43684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluose und Nitrocellulose - Neues Nitrierverfahren der Deutschen Celluloidfabrik Eilenburg JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 15 EP - 15 PB - Verl. Chemie CY - Berlin AN - OPUS4-43426 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Cellulose und Nitrocellulose - Verschiedenes JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 15 EP - 15 PB - Verl. Chemie CY - Berlin AN - OPUS4-43427 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 15 EP - 15 PB - Verl. Chemie CY - Berlin AN - OPUS4-43428 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Festlegung des Begriffs Celluloid JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 15 EP - 16 PB - Verl. Chemie CY - Berlin AN - OPUS4-43429 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Zur Röntgenfluoreszenzanalyse von Kulturgütern - Von Nebra bis Ägypten N2 - Im Vortag werden die Möglichkeiten der Synchrotronstrahlungsinduzierten Röntgenfluoreszenzanalayse (SRXRF) dargestellt. Insbesondere werden bei einer Reihe von Beispielen die Vorteile der SRXRF erläutert und der mögliche Einsatz eines portablen Messgeräts für die Analse von Glas diskutiert. T2 - Workshop: Ritter, Goethe, ihre Prismen und die Polarität CY - Jena, Germany DA - 19.05.2017 KW - Gold KW - Synchrotron KW - XRF KW - BESSY KW - Archeometry KW - BAMline PY - 2017 AN - OPUS4-42976 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Scholz, Philipp T1 - The Bernstorf Gold - A challenge to the flexibility of SRXRF N2 - The gold finds from Bernstorf, in the Freising district of Bavaria, were discovered in 1998, in the area of a Bronze Age settlement. First analyses with X-ray fluorescence (XRF) revealed gold of an unusually high purity grade, which was explained by using cementation techniques. A newer analysis with laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) indicated an even higher purity. These analytical results were the starting point of an ongoing discussion. The amount and type of the detected contaminants were highly controversial and led to contradictory interpretations. We reanalysed 11 gold samples with synchrotron radiation induced X-ray fluorescence (SRXRF) at the BAMline at BESSY-II. To reach the desired detection limits a thorough analysis with three different excitation energies and detection conditions were applied to confirm or disprove the previous results. In this contribution we will get into the details for the need of the different measurement conditions and the virtues of the use of synchrotron radiation. The use and effectiveness of cementation techniques will be addressed. Finally we will present the achieved results and their impact on the discussion. T2 - ICXOM 24 CY - Trieste, Italy DA - 25.10.2017 KW - Gold KW - Synchrotron KW - XRF KW - BESSY KW - Archeometry PY - 2017 AN - OPUS4-42977 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich T1 - TXRF and XANES at the BAMline N2 - The BAMline at the synchrotron BESSY II in Berlin supplies users with up to date analytical x-ray methods for the energy range between 5 and 50 keV. Additional to XRF with micron Resolution it provides amongst other things the possibility to use TXRF and XANES. Especially the use of the so-called Color X-Ray Camera (CXC) opens the possibility to use new and effective detection schemes, which allow to measure simultaneously distributions of elements or Absorption spectra in a motionless mode. In this talk the analytical possibilities at the BAMline for samples with biological Background will be introduced. The available methods will be presented and discussed for various examples. A perspective for the future use for XANES in grazing emission and TXRF geometries for plant materials will be given. T2 - TXRF 2017 CY - Brescia, Italy DA - 19.09.2017 KW - XANES KW - Synchrotron KW - XRF KW - BESSY PY - 2017 AN - OPUS4-42978 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Wie sicher ist die Bestimmung des Selbstentzündungsverhaltens großer Feststoffschüttungen? N2 - Für die Klassifizierung sowie die sichere Handhabung und Nutzung von Chemikalien und anderen Stoffen wurden spezielle standardisierte Testmethoden entwickelt, die weltweit zum Einsatz kommen. Die Ableitung von Sicherheitsmaßnahmen durch Experten erfordert, dass aus diesen Untersuchungen verlässliche Daten gewonnen werden. Ringversuche sind ein wesentliches Element bei der Methodenentwicklung (-validierung) und für die Qualitätssicherung von Laboratorien. Die Testmethode DIN EN 15188:2007 dient der Bestimmung des Selbstentzündungsverhaltens von Schüttgütern und Stäuben. Experimentelle Grundlage für die Beschreibung des Selbstentzündungsverhaltens eines bestimmten Materials ist die Bestimmung der Selbstentzündungstemperaturen (TSE) von Proben verschiedener Größen mit Hilfe isoperiboler Warmlagerungsversuche. Die so ermittelten Versuchsdaten ergeben die Abhängigkeit der Selbstentzündungstemperaturen vom Lagervolumen. Zweck einer schrittweise aufgebauten Serie von Ringversuchen und internen Labortests war die Identifizierung von Schwächen der bestehenden Methode bzw. von in der Laborpraxis auftretenden Mängeln bei der Anwendung der Methode, die Validierung der modifizierten und verbesserten Methode sowie die Bestimmung einer allgemeingültigen (Mess-)Unsicherheit dieser modifizierten Methode. T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Nürnberg, Germany DA - 24.10.2017 KW - Selbstentzündung KW - Methodenvalidierung KW - Messunsicherheit KW - Ringversuche PY - 2017 AN - OPUS4-43064 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas T1 - Prüfverfahren zur Bewertung der kathodischen Enthaftung bei organischen Beschichtungen – Eine kritische Betrachtung N2 - Im Vortrag werden mit Blick auf die geltenden Regelwerke und Normen die Unterschiede verschiedener Prüfmethoden zur kathodischen Enthaftung bei organischen Beschichtungen vorgestellt und deren Aussagekraft kritisch betrachtet. Am Beispiel von systematischen Versuchsreihen an einem Kurzzeittest werden die Grenzen einiger Methoden herausgearbeitet und die Anwendbarkeit für Reparaturbeschichtungen in Offshore-Bereich ausgelotet. T2 - Arbeitskreissitzung „Korrosionsuntersuchung und -überwachung“ des GfKORR e. V. CY - Magdeburg, Germany DA - 21.11.2017 KW - Kathodische Enthaftung KW - Cathodic delamination KW - Korrosionsprüfung KW - Corrosion testing KW - Organische Beschichtungen KW - Organic coatings PY - 2017 AN - OPUS4-43038 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Sicherheitsfilme JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 23 EP - 23 PB - Verl. Chemie CY - Berlin AN - OPUS4-43444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Sicherheitsfilme - Verbrennen und Verschwelen von Röntgensicherheitsfilmen und die dabei auftretenden Gase und Dämpfe JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 23 EP - 39 PB - Verl. Chemie CY - Berlin AN - OPUS4-43447 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Sicherheitsfilme - Prüfung von Schmalfilmen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 39 EP - 39 PB - Verl. Chemie CY - Berlin AN - OPUS4-43449 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Sicherheitsschränke JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 39 EP - 45 PB - Verl. Chemie CY - Berlin AN - OPUS4-43453 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Cellulose und Nitrocellulose - Stellungnahme zu einer Denkschrift über die Eignung verschiedener Zellstoffe zur Herstellung von Schießwolle JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 14 EP - 15 PB - Verl. Chemie CY - Berlin AN - OPUS4-43401 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Cellulose und Nitrocellulose - Verwendung einheimischer Rohstoffe statt Baumwolle zur Herstellung von Nitrocellulose JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 10 EP - 11 PB - Verl. Chemie CY - Berlin AN - OPUS4-43394 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Cellulose und Nitrocellulose - Verfahren von Schulze-Tiemann und Lunge zur Bestimmung des Stickstoffgehaltes von Nitrocellulosen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 11 EP - 12 PB - Verl. Chemie CY - Berlin AN - OPUS4-43395 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Cellulose und Nitrocellulose - Untersuchung der chemischen Eigenschaften einiger deutscher, amerikanischer und englischer Lackwollen JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 12 EP - 12 PB - Verl. Chemie CY - Berlin AN - OPUS4-43396 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Ruber, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Cellulose und Nitrocellulose - Beziehungen zwischen den chemischen und physikalischen Eigenschaften von Nitrocellulosen und ihre Eignung zu Lackierungszwecken JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 12 EP - 14 PB - Verl. Chemie CY - Berlin AN - OPUS4-43399 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Celluloidaltmaterial und unstabiles Celluloid - Feststellungen gelegentlich eines Brandes JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 16 EP - 18 PB - Verl. Chemie CY - Berlin AN - OPUS4-43437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Celluloidaltmaterial und unstabiles Celluloid - Untersuchung von Celluloid (Havanna) auf Säurehaltigkeit und Rostbildung JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 18 EP - 21 PB - Verl. Chemie CY - Berlin AN - OPUS4-43438 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Celluloidfilme (Kinofilme) - Erhebung über die Ursache von Bränden in Filmverwertungsanstalten JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 21 EP - 23 PB - Verl. Chemie CY - Berlin AN - OPUS4-43439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Celluloidfilme (Kinofilme) - Neuaufstellung der Sicherheitsvorschriften (Abschnitt V1) JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 23 EP - 23 PB - Verl. Chemie CY - Berlin AN - OPUS4-43440 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Arbeiten über Celluloid (Zellhorn) und Filme - Celluloidfilme (Kinofilme) - Statistische Untersuchungen von Filmabfallmaterial JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 23 EP - 23 PB - Verl. Chemie CY - Berlin AN - OPUS4-43441 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Untersuchungen über Leder, Lederimprägnierungsmittel, Lederfarben und Schuhputzmittel JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 46 EP - 46 PB - Verl. Chemie CY - Berlin AN - OPUS4-43454 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Rubens, Ernst A1 - Konschak, Martin A1 - Wallauer, T1 - Untersuchungen über Leder, Lederimprägnierungsmittel, Lederfarben und Schuhputzmittel - Lederimprägnierungsmittel und Glanzfette JF - Jahresbericht XIV der Chemisch-Technischen Reichsanstalt - 1935 PY - 1936 SN - 0368-1785 VL - XIV SP - 46 EP - 53 PB - Verl. Chemie CY - Berlin AN - OPUS4-43455 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - De la Rosa, J. M. A1 - Martin-Sanchez, Pedro Maria A1 - Santiago-Cortes, S. A1 - Hermosin, B. A1 - Knicker, H. A1 - Saiz-Jimenez, C. ED - De la Rosa, J. M. T1 - Structure of melanins from the fungi Ochroconis lascauxensis and Ochroconis anomala contaminating rock art in the Lascaux Cave JF - Scientific Reports N2 - Two novel species of the fungal genus Ochroconis, O. lascauxensis and O. anomala have been isolated from the walls of the Lascaux Cave, France. The interest in these fungi and their melanins lies in the formation of black stains on the walls and rock art which threatens the integrity of the paintings. Here we report solid-state cross polarization magic-angle spinning 13C and 15N nuclear magnetic resonance (NMR) spectroscopy and surface-enhanced Raman spectroscopy (SERS) of the melanins extracted from the mycelia of O. lascauxensis and O. anomala in order to known their chemical structure. The melanins from these two species were compared with those from other fungi. The melanins from the Ochroconis species have similar SERS and 13C and 15N NMR spectra. Their chemical structures as suggested by the data are not related to 3,4-dihydroxyphenylalanine, 5,6-dihydroxyindole or 1,8-dihydroxynaphthalene precursors and likely the building blocks from the melanins have to be based on other phenols that react with the N-terminal amino acid of proteins. The analytical pyrolysis of the acid hydrolysed melanin from O. lascauxensis supports this assumption. KW - Microbiology KW - Biodeterioration KW - Melanins KW - Fungi PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-435345 DO - https://doi.org/10.1038/s41598-017-13862-7 SN - 2045-2322 VL - 7 SP - 13441, 1 EP - 13441, 11 PB - Nature AN - OPUS4-43534 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Wie sicher sind Labortests - Die Bedeutung von Ringversuchen zur Methodenvalidierung am Beispiel der Bestimmung des Selbstentzündungsverhaltens großer Feststoffschüttungen N2 - Für die Klassifizierung sowie die sichere Handhabung und Nutzung von Chemikalien und anderen Stoffen wurden spezielle standardisierte Testmethoden entwickelt, die weltweit zum Einsatz kommen. Die Ableitung von Sicherheitsmaßnahmen durch Experten erfordert, dass aus diesen Untersuchungen verlässliche Daten gewonnen werden. Ringversuche sind ein wesentliches Element bei der Methodenentwicklung (-validierung) und für die Qualitätssicherung von Laboratorien. Die Testmethode DIN EN 15188:2007 dient der Bestimmung des Selbstentzündungsverhaltens von Schüttgütern und Stäuben. Experimentelle Grundlage für die Beschreibung des Selbstentzündungsverhaltens eines bestimmten Materials ist die Bestimmung der Selbstentzündungstemperaturen (TSE) von Proben verschiedener Größen mit Hilfe isoperiboler Warmlagerungsversuche. Die so ermittelten Versuchsdaten ergeben die Abhängigkeit der Selbstentzündungstemperaturen vom Lagervolumen. Zweck einer schrittweise aufgebauten Serie von Ringversuchen und internen Labortests war die Identifizierung von Schwächen der bestehenden Methode bzw. von in der Laborpraxis auftretenden Mängeln bei der Anwendung der Methode, die Validierung der modifizierten und verbesserten Methode sowie die Bestimmung einer allgemeingültigen (Mess-)Unsicherheit dieser modifizierten Methode. T2 - 13. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 16.11.2017 KW - Selbstentzündung KW - Methodenvalidierung KW - Messunsicherheit KW - Ringversuch PY - 2017 AN - OPUS4-43508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Aldrabee, A. A1 - Wriekat, A. A1 - Abu Saleem, K. A1 - Radtke, Martin T1 - Non-destructive SR-XRF analysis of ancient Mamluk-Ayyubid glazed pottery fragments from Karak Castle, Jordan JF - Jordan Journal of Physics N2 - Sixteen Ayyubid-Mamluk glazed pottery sherds were analyzed in order to identify and characterize the elemental composition to determine their provenance. The tested sherds were collected from the historical site of Karak Castle, southern Jordan. Chemical analysis for the sixteen samples has been carried out using Synchrotron Radiation X-ray Fluorescence Spectrometry (SR-XRF) Technique. Furthermore, the semiquantitative analysis of the elements Fe – Cu – Zn – Br – Rb – Sr – Y – Zr – Nb – Mo – Pd – Ag – Cd and Pb has been performed for the samples based on Principal Component Analysis (PCA) and hierarchical Cluster Analysis with Bray-Curtis in order to define grouping of different glazed pottery by obtaining information on their similarity and clustering. The results of chemical analysis provided persuasive evidence that the Karak Castle pottery sherds have at least three different sources of provenance. KW - BAMline KW - Karak Castle KW - Synchrotron KW - XRF PY - 2015 VL - 8 IS - 3 SP - 157 EP - 163 AN - OPUS4-43489 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Von der Antike in die Zukunft: Materialanalyse mit Synchrotronstrahlung N2 - Die Eigenschaften und die Verlässlichkeit von Materialien jeglicher Art sind seit jeher die Grundlagen der Technik einer Gesellschaft. Tiefgreifende Kenntnisse über sie sind deshalb eine Voraussetzung um neue Produkte zu entwickeln, Verlässlichkeit zu gewährleisten, oder aber auch, wie in der Archäometrie, Kenntnisse über die Vergangenheit zu gewinnen. Ein Schlüssel zum Verständnis ist das Wissen über die chemische Zusammensetzung und die Struktur von Materialien Die Analyse mit Synchrotronstrahlung bietet hierfür herausragende Werkzeuge an, die zerstörungsfrei und hochsensitiv sind. Mit Röntgenfluoreszenzanalyse kann die elementare Zusammensetzung in winzigen Proben bis auf μg/g bestimmt werden. Anwendungsbeispiele aus verschiedenen Themengebieten, aber besonders von archäologischen Fragestellungen wie z.B. dem Goldfund von Bernstorf werden im Vortrag vorgestellt. T2 - Berliner Industriegespräch CY - Berlin, Germany DA - 05.04.2017 KW - Gold KW - Synchrotron KW - XRF KW - BESSY KW - Archeometry KW - BAMline PY - 2017 AN - OPUS4-42979 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - News from the BAMline N2 - In this talk, the newest developments at the BAMline and examples of applications are presented. T2 - Seminar: STRAHLENPHYSIKALISCHE ANWENDUNGEN IN TECHNIK UND MEDIZIN CY - Vienna, Austria DA - 18.01.2017 KW - XANES KW - Synchrotron KW - XRF KW - BESSY PY - 2017 AN - OPUS4-42981 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Niemeyer, B. A1 - Schwarzmaier, A. A1 - Radtke, Martin A1 - Hahn, Oliver T1 - Archaische Goldarbeiten aus Kleinasien in der Berliner Antikensammlung – Herstellungstechnik, Materialanalytik und der Fundkomplex »aus Ephesos« JF - Restaurierung und Archäologie N2 - Ein Konvolut einzelner Schmuckstücke und die Goldbeigaben eines angeblichen Grabfundes wurden technologisch und analytisch untersucht. Die meisten Objekte sind Blecharbeiten, die aus einer Vielzahl von Einzelteilen mit metallischem Goldlot zusammengefügt und mit Granulation oder granulations-imitierendem Perl- oder Kerbdraht verziert wurden. Nur vier kleine Ohrringe sind massiv gegossen. Zwei Zierbleche dürften über Patrizen (Positivmodeln), die Deckel der Astragale in Matrizen (Negativmodeln) geformt worden sein. Alle Objekte wurden mit Synchrotron- und atmosphärischer Röntgenfluoreszenz analysiert. Die Daten zeigen das breite Spektrum an Goldlegierungen, die im 7./6. Jahrhundert v. Chr. in Kleinasien verarbeitet wurden: vom natürlichen Seifengold (Elektrum) bis zu geläutertem, fast reinem Gold. Eine Korrelation zwischen Goldqualität und Verarbeitungsmethode konnte nicht festgestellt werden. Sowohl hochreines als auch mit viel Silber und Kupfer legiertes Gold wurde zum Schmieden von Blecharbeiten, aber auch zum Massivguss verwendet. Aus der Goldfarbe kann wegen des Phänomens der oberflächlichen Goldanreicherung nicht auf eine Legierungszusammensetzung geschlossen werden. Der 1963 angekaufte Fundkomplex aus lydischen Metallarbeiten und ostionischen Salbgefäßen aus Ton dürfte einen Grabfund des frühen 6. Jahrhunderts v. Chr. darstellen, dessen Herkunft aus Ephesos jedoch nicht zu sichern ist. KW - Gold KW - Synchrotron KW - XRF PY - 2017 SN - 1866-7007 VL - 9 SP - 57 EP - 83 PB - RGZM. Archäologische Staatssammmlung München CY - München AN - OPUS4-42986 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lüth, Peter A1 - Brandes, E. A1 - Frost, K. A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Michael-Schulz, Heike A1 - Uhlig, S. T1 - CEQAT-DGHS Ringversuchsprogramm für die Chemikaliensicherheit – Methodenvalidierung T2 - Proceedings der 13. Fachtagung Anlagen, Arbeits- und Umweltsicherheit N2 - Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. Die Bundesanstalt für Materialforschung und –prüfung (BAM) unterstützt deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS). Bei allen bisher untersuchten Prüfmethoden besteht ein Verbesserungsbedarf. Die RV müssen daher zunächst auf die Methodenentwicklung, -verbesserung und -validierung und auf die Bestimmung der Messunsicherheit der jeweiligen Prüfmethode abzielen und nicht auf Leistungstests. T2 - 13. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 16.11.2017 KW - Gefahrgut KW - Gefahrstoff KW - Ringversuch KW - Prüfmethode KW - Validierung KW - Qualitätssicherung PY - 2017 SN - 978-3-96057-032-5 SP - 1 EP - 13 CY - Köthen AN - OPUS4-43299 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Heyn, A. A1 - Rosemann, Paul A1 - Babutzka, Martin A1 - Bender, S. T1 - Electrochemical noise of unalloyed steel in mixtures of water-based binders and pigments JF - Materials and Corrosion N2 - The development of organic coatings for corrosion protection is an elaborate process with a multitude of often interminable investigations and tests of protection properties. Electrochemical methods support the processes of development to a great extent and help to understand mechanisms of action and failure. They are usually carried out on applied coating systems with a completed formulation. An examination possibility is presented in this publication that enables the characterization of waterbased coatings with different formulation variations in the liquid (aqueous) state with the aid of electrochemical noise technique. Thus, selection of binders, pigments, and other additives is supported essentially and made more efficient in a very early Phase of formulation development. The paper shows that a unique insight into the dynamic processes of a metal in contact with an aqueous coating dispersion is possible using the example of the development of zinc-free corrosion-inhibiting pigments for waterbased coatings. In addition, it is presented in which way the results correlate with the performance of applied coatings. KW - Organic coatings KW - Electrochemical noise KW - Corrosion KW - Corrosion protection KW - Corrosion protection pigments PY - 2017 DO - https://doi.org/10.1002/maco.201709671 SN - 0947-5117 SN - 1521-4176 VL - 68 IS - 12 SP - 1295 EP - 1301 PB - Wiley-VCH Verlag CY - Weinheim AN - OPUS4-43319 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas T1 - Vorstellung der Korrosionsuntersuchungen im Rahmen des Themenfeldprojektes LeBeWind an der BAM N2 - Im Vortrag wird das Teilprojekt Korrosion des Themenfeldprojektes LeBeWind vorgestellt. Dabei werden mit Blick auf die geltenden Regelwerke und Normen die Unterschiede verschiedener Prüfmethoden zur kathodischen Enthaftung bei organischen Beschichtungen vorgestellt und deren Aussagekraft kritisch betrachtet. Am Beispiel von systematischen Versuchsreihen an einem Kurzzeittest werden die Grenzen einiger Methoden herausgearbeitet und die Anwendbarkeit für Reparaturbeschichtungen in Offshore-Bereich hinterfragt. Zusätzlich werden die Problemstellungen bei der Versalzung von metallischen Oberflächen im maritimen und Offshore-Bereich betrachtet. T2 - Arbeitskreissitzung „Korrosionsschutz von Windenergieanlagen“ des GfKORR e. V. CY - Bremen, Germany DA - 29.11.2017 KW - Kathodische Enthaftung KW - Cathodic delamination KW - Korrosionsprüfung KW - Corrosion testing KW - Organische Beschichtungen KW - Organic coatings PY - 2017 AN - OPUS4-43231 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Nehrig, Marko A1 - Bletzer, Claus A1 - Musolff, André A1 - Erenberg, Marina A1 - Schönfelder, Thorsten A1 - Wille, Frank T1 - Aspects of Assessment of Packages with Wood Filled Impact Limiters during Fire Tests N2 - Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood, encapsulated by steel sheets. These impact limiters shall ensure that the transport casks meet the mechanical and thermal IAEA regulatory test requirements. According to the accident conditions of transport it is mandatory to expose the specimens to a cumulative effect by mechanical and thermal impacts. The mechanical tests consist of a free drop from 9 m onto a flat unyielding target and a 1 m drop onto a puncture bar. After damage caused by mechanical test sequences the package has to withstand a severe fire scenario. Corresponding to the IAEA advisory material it is required that the impact attitudes for the 9 m drop test and for the puncture test have to be such as to produce maximum damage, taking into account the thermal test. Moreover, any damage, which would give rise to increased radiation or loss of containment or affect the confinement system after the thermal test, should be considered. During and following the thermal test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally. Different works from the French Institute for Radiological Protection and Nuclear Safety (IRSN) and BAM show that additional energy supply from a pre-damaged impact limiter to the cask could occur. This effect should be considered within the safety assessment of the containment. Thermal effects at the closure system of the cask, which might result in an elevated activity release, have to be excluded. BAM conducted small scale tests with wood filled metal buckets showing continuing combustion processes during the cooling down phase. These test results are presented. As not much is known about smouldering processes in wood filled impact limiters, it is highly complex to define pre-damage of impact limiters, which are conservative, regarding the maximum damaging energy flow from the impact limiter to the containment system. More research has to be done to develop models to examine the effects of smouldering impact limiters on the containment of packages for the transport of radioactive material. Aspects of assessment and its difficulties are shown. BAM as a competent authority for the approval of transport casks for radioactive material in Germany operates the test facilities to examine the issue of mechanical damage, combustion and heat transfer for such kind of package systems. For this purpose the knowledge from real drop tests with casks of a mass partly over 100 tons was transferred to a test application. A thermal test will take place with a wood filled test specimen with a diameter of about 2.3 meters. The aim is to understand the phenomena of smouldering under the consideration of relevant regulatory boundary conditions. The process of smouldering is described with regard to the requirements in the thermal assessment of safety of packages for the transport of radioactive material. Requirements concerning the pre-damage of packages for the maximum damage of impact limiters are discussed. Parameters influencing the smouldering process are identified. T2 - WM 2017 Conference CY - Phoenix, Arizona, USA DA - 05.03.2017 KW - Fire test KW - Wood KW - Combustion KW - Smouldering KW - Smoldering KW - Impact limiter KW - Shock absorber KW - Thermal test KW - IAEA PY - 2017 AN - OPUS4-43170 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Erenberg, Marina A1 - Nehrig, Marko A1 - Bletzer, Claus A1 - Musolff, André A1 - Schönfelder, Thorsten A1 - Wille, Frank T1 - Behavior of wood filled impact limiters during the IAEA thermal test T2 - Proceedings-CD, ASME 2017 Pressure Vessels & Piping Conference (PVP 2017) N2 - Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood, encapsulated by steel sheets. These impact limiters shall ensure that transport casks meet the IAEA safety requirements. After damage caused by the mechanical tests the package has to withstand a severe fire scenario. It is required that the mechanical tests have to produce maximum damage, taking into account the thermal test. Furthermore, any damage, which would give rise to increased radiation or loss of containment or affect the confinement system after the thermal test, should be considered. Concerning the thermal test, the IAEA safety requirements state that during and following the fire test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally. Different works from the French Institute for Radiological Protection and Nuclear Safety (IRSN) and BAM show that additional energy supply from a pre-damaged impact limiter to the cask could occur caused by smoldering of the wood. This effect should be considered within the safety assessment of the package. A heat wave from the fire could overlap with the additional energy from the impact limiter in the sealing system. In 2015 BAM conducted small scale fire tests with wood filled metal drums showing continuing combustion processes during the cooling down phase. As not much is known about smoldering processes in wood filled impact limiters, it is highly complex to define pre-damage of impact limiters, which are conservative, regarding the most damaging energy flow from the impact limiter to the containment system in dependence of time. More research has to be done to develop models to examine the effects of smoldering impact limiters on the containment of packages for the assessment. The process of smoldering is described with regard to the requirements in the thermal safety assessment. Parameters influencing the smoldering process are identified. BAM operates test facilities to examine the issue of mechanical damage, combustion and heat transfer of packages for transport of radioactive material. A thermal test will take place with a wood filled test specimen with a diameter of about 2.3 meters. The aim is to understand the phenomena of smoldering under the consideration of relevant regulatory boundary conditions. T2 - ASME 2017 Pressure Vessels and Piping Conference (PVP2017) CY - Waikoloa, Hawaii, USA DA - 16.07.2017 KW - Fire test KW - Wood KW - IAEA KW - Smoldering KW - Smouldering KW - Shock absorber KW - Thermal test KW - Combustion KW - Impact limiter PY - 2017 SN - 978-0-7918-5802-8 VL - 7 SP - Article UNSP V007T07A038, 1 EP - 9 AN - OPUS4-43172 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Erenberg, Marina A1 - Nehrig, Marko A1 - Bletzer, Claus A1 - Musolff, André A1 - Wille, Frank A1 - Schönfelder, Thorsten T1 - Aspects of assessment of packages with wood filled impact limiters during fire tests T2 - WM 2017 Conference Proceedings N2 - Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood, encapsulated by steel sheets. These impact limiters shall ensure that the transport casks meet the mechanical and thermal IAEA regulatory test requirements. According to the accident conditions of transport it is mandatory to expose the specimens to a cumulative effect by mechanical and thermal impacts. The mechanical tests consist of a free drop from 9 m onto a flat unyielding target and a 1 m drop onto a puncture bar. After damage caused by mechanical test sequences the package has to withstand a severe fire scenario. Corresponding to the IAEA advisory material it is required that the impact attitudes for the 9 m drop test and for the puncture test have to be such as to produce maximum damage, taking into account the thermal test. Moreover, any damage, which would give rise to increased radiation or loss of containment or affect the confinement system after the thermal test, should be considered. During and following the thermal test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally. Different works from the French Institute for Radiological Protection and Nuclear Safety (IRSN) and BAM show that additional energy supply from a pre-damaged impact limiter to the cask could occur. This effect should be considered within the safety assessment of the containment. Thermal effects at the closure system of the cask, which might result in an elevated activity release, have to be excluded. BAM conducted small scale tests with wood filled metal buckets showing continuing combustion processes during the cooling down phase. These test results are presented. As not much is known about smouldering processes in wood filled impact limiters, it is highly complex to define pre-damage of impact limiters, which are conservative, regarding the maximum damaging energy flow from the impact limiter to the containment system. More research has to be done to develop models to examine the effects of smouldering impact limiters on the containment of packages for the transport of radioactive material. Aspects of assessment and its difficulties are shown. BAM as a competent authority for the approval of transport casks for radioactive material in Germany operates the test facilities to examine the issue of mechanical damage, combustion and heat transfer for such kind of package systems. For this purpose the knowledge from real drop tests with casks of a mass partly over 100 tons was transferred to a test application. A thermal test will take place with a wood filled test specimen with a diameter of about 2.3 meters. The aim is to understand the phenomena of smouldering under the consideration of relevant regulatory boundary conditions. The process of smouldering is described with regard to the requirements in the thermal assessment of safety of packages for the transport of radioactive material. Requirements concerning the pre-damage of packages for the maximum damage of impact limiters are discussed. Parameters influencing the smouldering process are identified. T2 - WM 2017 Conference CY - Phoenix, AZ, USA DA - 05.03.2017 KW - Fire test KW - Wood KW - Combustion KW - Smouldering KW - Smoldering KW - Impact limiter KW - Shock absorber KW - Thermal test KW - IAEA PY - 2017 SN - 978-0-9828171-6-2 SP - 1 AN - OPUS4-40157 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, A. T1 - Dynamische Anpassung der Tafelkonstanten unter Verwendung gelartiger Elektrolyte für die Bestimmung von Korrosionsraten an Zink N2 - Der Beitrag stellt eine neue Herangehensweise zur Bestimmung und Bewertung von Tafelfaktoren unter Verwendung gelartiger Elektrolyte und der Electrochemical Frequency Modulation (EFM) vor. Diese relativ neue elektrochemische Methode bietet die Möglichkeit, innerhalb einer Messung und in kurzen Messintervallen sowohl Polarisationswiderstände als auch Tafelfaktoren zu bestimmen. Ausgehend von einer umfassenden Parameterstudie wird gezeigt, dass ein direkter Zusammenhang zwischen den beiden Werten besteht, der mathematisch beschrieben werden kann. Die ermittelten B-Werte werden in diesem Beitrag vorgestellt und hinsichtlich ihrer Anwendbarkeit und Grenzen diskutiert. T2 - 19. Werkstofftechnisches Kolloquium der TU Chemnitz CY - Chemnitz, Germany DA - 16.03.2017 KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Zink KW - Zinc KW - Stearn-Geary-Konstante KW - Stern Geary constant PY - 2017 AN - OPUS4-39431 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babutzka, Martin A1 - Heyn, A. T1 - Dynamic tafel factor adaption for the evaluation of instantaneous corrosion rates on zinc by using gel-type electrolytes JF - IOP Conf. Series: Materials Science and Engineering N2 - The paper presents a new method for the determination and evaluation of tafel factors using gel-type electrolytes and electrochemical frequency modulation technique (EFM). This relatively new electrochemical method offers the possibility to determine both polarization resistances and tafel factors within one measurement and in short measuring intervals. Starting from a comprehensive parameter study it is shown that a direct relationship between the two values exists that can be described mathematically. This contribution presents the determined tafel factors for the system gel-type electrolyte/zinc and discusses their applicability and their limits. T2 - 19th Chemnitz Seminar on Materials Engineering – 19. Werkstofftechnisches Kolloquium CY - Chemnitz, Germany DA - 16.03.2017 KW - Gel-type electrolytes KW - Gelartige Elektrolyte KW - Zinc KW - Zink KW - Stern Geary constant KW - Stern-Geary-Konstante PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-394324 UR - http://iopscience.iop.org/article/10.1088/1757-899X/181/1/012021/pdf DO - https://doi.org/10.1088/1757-899X/181/1/012021 SN - 1757-899X SN - 1757-8981 VL - 181 IS - Conference 1 SP - Article UNSP 012021, 1 EP - 11 PB - IOP Publishing CY - Bristol, UK AN - OPUS4-39432 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heyn, A. ED - Lampke, T. ED - Wagner, G. ED - Wagner, M.F.-X. T1 - Dynamic tafel factor adaption for the evaluation of instantaneous corrosion rates on zinc by using gel-type electrolytes T2 - Tagungsband zum 19. Werkstofftechnischen Kolloquium N2 - The paper presents a new method for the determination and evaluation of tafel factors using gel-type electrolytes and electrochemical frequency modulation technique (EFM). This relatively new electrochemical method offers the possibility to determine both polarization resistances and tafel factors within one measurement and in short measuring intervals. Starting from a comprehensive parameter study it is shown that a direct relationship between the two values exists that can be described mathematically. This contribution presents the determined tafel factors for the system gel-type electrolyte/zinc and discusses their applicability and their limits. T2 - 19. Werkstofftechnisches Kolloquium der TU Chemnitz CY - Chemnitz, Germany DA - 16.03.2017 KW - Gel-type electrolytes KW - Gelartige Elektrolyte KW - Zinc KW - Zink KW - Stern Geary constant KW - Stern-Geary-Konstante PY - 2017 SN - 978-3-00-055705-7 SN - 1439-1597 VL - 61 SP - 189 EP - 199 PB - TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik CY - Chemnitz AN - OPUS4-39434 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Babutzka, Martin T1 - Handbuch Korrosionsschutz in der Seeschifffahrt (Book review) T2 - Materials and Corrosion N2 - Mit dem Handbuch Korrosionsschutz in der Seeschifffahrt hat der Seehafen Verlag ein Nachschlagewerk für den Schiffbau und den Offshore-Bereich veröffentlicht. Das Buch richtet sich, nach Angabe des Autors, vorwiegend an Schiffsmechaniker in der Ausbildung, Studierende der Fächer Schiffbau, Nautik und Schiffstechnik sowie technische Offiziere und Inspektoren. Das Handbuch soll als Informationsquelle bei der Beurteilung von Arbeitsergebnissen von Werften helfen, speziell den Korrosionsschutz betreffend. Dabei versteht sich das Buch als praxisorientiertes Handbuch, was durch eine Vielzahl an Rechenbeispielen und anschaulichen Abbildungen aus der Praxis unterstrichen wird. KW - Organische Beschichtungen KW - Organic coatings KW - Korrosionsschutz KW - Corrosion protection KW - Korrosion im maritimen Bereich KW - Corrosion in maritime environment PY - 2017 SN - 0947-5117 SN - 0043-2822 SN - 1521-4176 VL - 68 IS - 6 SP - Korrosionsnachrichten, 3 EP - Korrosionsnachrichten, 4 PB - Wiley-VCH-Verlag GmbH & Co KGaA CY - Weinheim AN - OPUS4-40457 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Nowak, S. H. A1 - Petric, M. A1 - Buchriegler, J. A1 - Bjeoumikhov, A. A1 - Bjeoumikhova, Z. A1 - von Borany, J. A1 - Munnik, F. A1 - Radtke, Martin A1 - Renno, A. D. A1 - Reinholz, Uwe A1 - Scharf, O. A1 - Tilgner, J. A1 - Wedell, R. T1 - Road to micron resolution with a color X-ray camera – polycapillary optics characterization T2 - arXiv.org N2 - In a color X-ray camera spatial resolution is achieved by means of a polycapillary optic conducting X-ray photons from small regions on a sample to distinct energy dispersive pixels on a CCD matrix. At present, the resolution limit of color X-ray camera systems can go down to several microns and is mainly restricted by Pixel dimensions. The recent development of an efficient subpixel resolution algorithm allows a release from pixel size, limiting the resolution only to the quality of theoptics. In this work polycapillary properties that influence the spatial resolution are systematized and assessed both theoretically and experimentally. It is demonstrated that with the current technological Level reaching one micron resolution is challenging, but possible. KW - Color X-ray camera KW - Polycapillary optics PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-404404 UR - https://arxiv.org/abs/1705.08939 SN - 2331-8422 SP - 1 EP - 11 PB - Cornell University CY - Ithaca, NY AN - OPUS4-40440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wiggenhauser, Herbert A1 - Samokrutov, A A1 - Mayer, K A1 - Krause, Martin A1 - Alekhin, S. G. A1 - Elkin, V T1 - Large aperture ultrasonic system for testing thick concrete structures JF - Journal of Infrastructure Systems N2 - A Large Aperture UltraSonic system (LAUS) has been designed and built for testing thick concrete structures. The scalable system consists of twelve ultrasonic units, each hosting 32 individual shear wave transducers with mechanical dry point contact (DPC) to the concrete surface. The twelve units are attached to the concrete surface using a vacuum case which holds them in place during operation. Each LAUS unit can be placed individually on the surface to achieve optimal ultrasonic condition, e.g. to avoid rebars. For the generation of vacuum, air pressure is supplied to each unit through an air hose. The twelve units define an aperture which is necessary for fast reconstruction of the subsurface structure. The well-known SAFT (Synthetic Aperture Focusing Technique) algorithm has been adopted to this situation, where the individual LAUS units form a linear aperture with not necessarily equidistant spacing between the units. The exact geometrical position of the units, which are individually marked with retroreflective labels, is determined using photographs and image processing. All transducers are synchronized and work either as transmitter or receiver. A full scan consists of 12 * 11 recordings, where each unit acts as transmitter once and all others as receivers. An electronic sub-unit on the back of the ultrasonic device holds the battery and handles data acquisition, synchronization and data communication. A computer is used as base unit which communicates with each LAUS unit for control and data acquisition, the synchronization is performed by a radio modem that uses a special algorithm similar to a digital PLL (phase locked loop). No wire connections are necessary between the units and the base system. The LAUS system is designed to investigate concrete structures with thicknesses in excess of 2 m, depending on the acoustic condition of the object under investigation. Highly reinforced concrete may have less penetration depth. The LAUS provides quasi real time imaging, once the transducers are put in place and the data has been acquired. First measurements on a foundation slab confirm, that the system can register ultrasonic echoes from the back wall at 4 m distance. KW - Ultrasound "Large Aperture" NDT Concrete PY - 2017 DO - https://doi.org/10.1061/(ASCE)IS.1943-555X.0000314 SN - 1076-0342 SN - 1943-555X VL - 23 IS - 1 SP - B4016004-1 EP - B4016004-9 PB - American Society of Civil Engineers (ASCE) CY - Reston, VA 20191-4400 USA AN - OPUS4-39372 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rauwolf, M. A1 - Turyanskaya, A. A1 - Roschger, A. A1 - Prost, J. A1 - Simon, R. A1 - Scharf, O. A1 - Radtke, Martin A1 - Schoonjans, Tom A1 - de Oliveira Guilherme Buzanich, Ana A1 - Klaushofer, K. A1 - Wobrauschek, P. A1 - Hofstaetter, J. G. A1 - Roschger, P. A1 - Streli, C. T1 - Synchrotron radiation micro X-ray fluorescence spectroscopy of thin structures in bone samples: comparison of confocal and color X-ray camera setups JF - Journal of Synchrotron Radiation N2 - In the quest for finding the ideal synchrotron-radiation-induced imaging method for the investigation of trace element distributions in human bone samples, experiments were performed using both a scanning confocal synchrotron radiation micro X-ray fluorescence (SR-mXRF) (FLUO beamline at ANKA) setup and a full-field color X-ray camera (BAMline at BESSY-II) setup. As zinc is a trace element of special interest in bone, the setups were optimized for its detection. The setups were compared with respect to count rate, required measurement time and spatial resolution. It was demonstrated that the ideal method depends on the element of interest. Although for Ca (a major constituent of the bone with a low energy of 3.69 keV for its K alpha XRF line) the color X-ray camera provided a higher resolution in the plane, for Zn (a trace element in bone) only the confocal SR-µXRF setup was able to sufficiently image the distribution. KW - Synchrotron KW - BAMline KW - BESSY KW - XRF KW - X-ray Color Camera PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-391944 DO - https://doi.org/10.1107/S1600577516017057 SN - 1600-5775 VL - 24 SP - 307 EP - 311 PB - International Union of Crystallography AN - OPUS4-39194 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Kohlhoff, Harald A1 - Hüllmann, Dino A1 - Lilienthal, A.J. A1 - Kluge, Martin T1 - Bringing Mobile Robot Olfaction to the Next Dimension – UAV-based Remote Sensing of Gas Clouds and Source Localization T2 - Proceedings of the 2017 IEEE International Conference on Robotics and Automation (ICRA) N2 - This paper introduces a novel robotic platform for aerial remote gas sensing. Spectroscopic measurement methods for remote sensing of selected gases lend themselves for use on mini-copters, which offer a number of advantages for inspection and surveillance. No direct contact with the target gas is needed and thus the influence of the aerial platform on the measured gas plume can be kept to a minimum. This allows to overcome one of the major issues with gas-sensitive mini-copters. On the other hand, remote gas sensors, most prominently Tunable Diode Laser Absorption Spectroscopy (TDLAS) sensors have been too bulky given the payload and energy restrictions of mini-copters. Here, we introduce and present the Unmanned Aerial Vehicle for Remote Gas Sensing (UAV-REGAS), which combines a novel lightweight TDLAS sensor with a 3-axis aerial stabilization gimbal for aiming on a versatile hexacopter. The proposed system can be deployed in scenarios that cannot be addressed by currently available robots and thus constitutes a significant step forward for the field of Mobile Robot Olfaction (MRO). It enables tomographic reconstruction of gas plumes and a localization of gas sources. We also present first results showing the gas sensing and aiming capabilities under realistic conditions. T2 - IEEE International Conference on Robotics and Automation (ICRA) CY - Singapore DA - 29.05.2017 KW - Tunable Diode Laser Absorption Spectroscopy (TDLAS) KW - 3-axis gimbal KW - Mobile Robot Olfaction KW - Tomographic reconstruction of gas plumes KW - Localization of gas sources KW - Aerial platform PY - 2017 SN - 978-1-5090-4632-4 SP - 3910 EP - 3916 PB - IEEE AN - OPUS4-40545 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Trela, C. A1 - Kind, Thomas A1 - Günther, Martin T1 - Ground penetrating radar in reflection vs transmission mode for void detection in concrete structures T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering (Proceedings) N2 - The concreting of prefabricated concrete structures can lead to insufficient bonding or even to remaining cavities. Honeycombs (aggregate clusters without cement) represent potential weakening of the structure and need to be detected non-destructively. In our study we tested the capability of ground penetrating radar (GPR)techniques for this purpose. We applied GPR in reflection mode and zero-offset profiling (ZOP) Transmission mode on a precast concrete twin wall with built-in honeycombs. GPR measurements were performed as twochannel measurement with ground coupled antennas with centre frequencies of 1.5 GHz and 2.6 GHz mounted to an automated scanner system. Our findings show that ZOP transmission measurements are a more efficient method to detect voids in reinforced concrete structures compared to reflection mode measurements. This holds for both the effort needed for the measurement and the evaluation as well as the validity of the data. Honeycombs (basically representing voids) are usually characterized by strongly reduced amplitudes and earlier arrivals of the transmitted wave. T2 - NDT-CE 2015 - International symposium non-destructive testing in civil engineering CY - Berlin, Germany DA - 15.09.2015 KW - Ground penetrating radar KW - Reflection KW - Transmission KW - Reinforced concrete KW - Prefabricated wall KW - Void detection PY - 2015 SN - 1435-4934 SP - 324 EP - 344 PB - Technische Universität Berlin / Bundesanstalt für Materialforschung und -prüfung CY - Berlin, Germany AN - OPUS4-40006 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gersonde, Martin A1 - Deppe, Hans-Joachim T1 - Zum Stand von Imprägnierung und Prüfung geschützter Holzwerkstoffe (Typ V 100 G) JF - Holz als Roh- und Werkstoff : European journal of wood and wood products PY - 1983 SN - 0018-3768 VL - 41 IS - 9 SP - 323 EP - 328 PB - Springer CY - Berlin AN - OPUS4-39652 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mitova, M. A1 - Iliev, M. A1 - Nováková, A. A1 - Gorbushina, Anna A1 - Groudeva, V.I. A1 - Martin-Sanchez, Pedro Maria T1 - Diversity and biocide susceptibility of fungal assemblages dwelling in the Art Gallery of Magura Cave, Bulgaria JF - International Journal of Speleology N2 - Magura Cave, north-western Bulgaria, possesses valuable rock-art paintings made with bat guano and dated from the period between the Eneolithic and Bronze Ages. Since 2008, the Art Gallery is closed to the general public in order to protect the paintings from vandalism, microclimatic changes caused by visitors and artificial illumination, and the consequent growth of fungi and phototrophs. Nevertheless, some tourist visits are allowed under the supervision of cave managers. This study provides the first scientific report on cultivable fungal assemblages dwelling different substrata in the Art Gallery. A total of 78 strains, belonging to 37 OTUs (Ascomycota 81%, Zygomycota 13%, Basidiomycota 5%), were isolated in the study. This fungal diversity was clearly dominated by Penicillium (50% of strains) and Aspergillus (13%). The most relevant visible fungal colonies were detected in sediments rich in bat guano, where, besides Penicillium, other guanophilic fungi such as Mucor, Mortierella, Trichosporon and Trichoderma were dominant. Conversely, scarce fungi were detected on rock surface of painted walls. Based on the biocide susceptibility assay, octylisothiazolinone (OIT) and benzalkonium chloride (BAC) were effective inhibiting the in vitro growth of dominant fungal species in Magura Cave, when applied at concentrations ranged from 100 to 1,000 mg/L. These data provide a valuable knowledge about Magura fungi, and exemplify a type of preliminary test that may be conducted before planning any biocide treatment. However, considering the irreversible effects of biocides on the ecological balance in caves, and the low fungal contamination in painted walls of Magura Cave, there is no reason to use conventional biocides in this cave. Further studies, monitoring microbial communities and microclimatic parameters, should be conducted to improve the knowledge on microbial ecology in Magura Cave and possible human impacts, as well as to allow the early detection of potential microbial outbreaks. KW - Fungi KW - Rock-art caves KW - Biocides PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-397436 DO - https://doi.org/10.5038/1827-806X.46.1.2061 SN - 0392-6672 VL - 46 IS - 1 SP - 67 EP - 80 PB - Scholar Commons CY - Tampa, FL, USA AN - OPUS4-39743 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wu, D. A1 - Schmidt, Martin A1 - Huang, X. A1 - Verplaesten, F. T1 - Self-ignition and smoldering characteristics of coal dust accumulations in O2/N2 and O2/CO2 atmospheres JF - Proceedings of the Combustion Institute 36 (2017) N2 - The self-ignition of coal dust deposits and its subsequent smoldering combustion pose a high fire hazard to oxy-fuel power systems which burn fuels using pure oxygen for the sake of carbon capture and storage. The increasing risk of explosion in the gas-phase and self-ignition in the solid-phase for an oxygen enhanced combustion environment has not been well studied yet. In this work, the heterogeneous reactions of a bituminous coal dust are investigated by using a novel hot-basket apparatus with an emphasis on the roles of O2 and diluent gas in chemisorption and smoldering. Experiments show that increasing O2 mole fraction accelerates both self-ignition and the following smoldering combustion. On the other hand, the presence of CO2 increases the ignition temperature and reduces the maximum smoldering temperature. However, the promotion in the fire and explosion risk by elevating O2 mole fraction is substantially stronger than the retardation effected by presence of CO2. The emission-gas measurements show that the CO to CO2 ratio increases significantly after self-ignition, and CH4 counts for 1–8% of the total carbon emission. This research may help improve the understanding of heterogeneous coal combustion and the fire safety in oxy-fuel power systems. KW - Oxy-fuel cobustion KW - Fire hazard KW - FTIR KW - CO/CO2 ratio KW - CH4 PY - 2017 DO - https://doi.org/10.1016/j.proci.2016.08.024 SN - 1540-7489 SN - 1873-2704 VL - 36 IS - 2 SP - 3195 EP - 3202 AN - OPUS4-39927 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Brand- und Explosionsgefahren beim Umgang mit Metallstäuben N2 - Grundlagen des Brand- und Explosionsschutzes mit Schwerpunkt Metallstäube: - Gefahren - Prinzipien des Explosionsschutzes - Ableiten von Schutzmaßnahmen - Bestimmung der Stoffeigenschaften - Umgang mit entsprechenden Datenbanken T2 - DGM-Fortbildungsseminar "Metallpulver Erzeugen - Charakterisieren - Anwenden" CY - Bremen, Germany DA - 30.03.2017 KW - Brandschutz KW - Explosionsschutz KW - Sicherheitstechnische Kenngrößen PY - 2017 AN - OPUS4-39917 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Wittig, Günther A1 - Thomas, Hans-Martin A1 - Maser, Dieter T1 - Developments and Investigations for the Application of the Pulsed Eddy Current Technique T2 - New procedures in nondestructive testing : proceedings of the Germany-U.S. Workshop T2 - New procedures in nondestructive testing CY - Saarbrücken, Germany DA - 30.08.1982 PY - 1983 SN - 3-540-12187-0 SN - 0-387-12187-0 SP - 479 EP - 488 PB - Springer CY - Berlin AN - OPUS4-40605 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dümmel, Martin A1 - Lohrer, Christian A1 - Mücke, Olaf T1 - Tumbling effects of cylindrical shells T2 - 16th International Symposium on Fireworks, Proceedings N2 - In the future new types of lift charges for display Shells will enter the market. These types may not be based on black powder and therefore will show different Performance behaviors. The European standard series EN 16261 deals with the testing and assessment of display fireworks in order to satisfy the essential safety requirements which have to be met before placing these items on the EU market. The aim of the study is to investigate how certain types of lift charges (NC based) influence the lift, tumbling and drift of cylindrical shells. In consequence, if the performance characteristics deviate strongly from those of typical black powder, safety related regulations in the EU and Germany might be affected, as well. For these investigations, over 50 cylindrical shells were specifically manufactured at BAM to guarantee full influence on all relevant constructional aspects. The shells were constructed to be “blind”, i. e. without break and effect charges, to investigate drift effect on ground in relation to the shooting location. The only reactive substances were the lift charges and a tracer star at the bottom of the shells to guarantee visibility for the post processing using the video grammetric system. The cylindrical shells were of a nominal caliber of 100 mm and manufactured in three different length configurations (single, double and triple length). Their gross weights were designed to correspond to typical effect shells of the same kind. In addition, the impact of different weight distributions inside the shells, leading to altered balance points, on the performance parameters of the shells were also part of this study. Three different types of NC based lift charges were used to show a variety in pressure build ups. T2 - 16th International Symposium on Fireworks CY - Omagari, Japan DA - 24.04.2017 KW - Fireworks KW - Shells KW - Tumbling PY - 2017 SP - 305 EP - 322 AN - OPUS4-40608 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schilling, Markus A1 - Niebergall, Ute A1 - Alig, I. A1 - Oehler, H. A1 - Lellinger, D. A1 - Meinel, Dietmar A1 - Böhning, Martin T1 - Crack propagation in PE-HD induced by environmental stress cracking (ESC) analyzed by several imaging techniques JF - Polymer Testing N2 - Different imaging techniques were employed to monitor Full Notch Creep Test (FNCT) experiments addressing environmental stress cracking in more detail. The FNCT is a well-established test method to assess slow crack growth and environmental stress cracking of polymer materials, especially polyethylene. The standard test procedure, as specified in ISO 16770, provides a simple comparative measure of the resistance to crack growth of a certain material based on the overall time to failure when loaded with a well-defined mechanical stress and immersed in a liquid medium promoting crack propagation. Destructive techniques which require a direct view on the free fracture surface, such as light microscopy and laser scanning microscopy, are compared to non-destructive techniques, i.e. scanning acoustic microscopy and xray micro computed tomography. All methods allow the determination of an effective crack length. Based on a series of FNCT specimens progressively damaged for varied Durations under standard test conditions, the estimation of crack propagation rates is also enabled. Despite systematic deviations related to the respective Imaging techniques, this nevertheless provides a valuable tool for the detailed evaluation of the FNCT and its further development. KW - Environmental stress cracking (ESC) KW - Slow crack growth (SCG) KW - Full notch creep test (FNCT) KW - X-ray computed tomography (CT) KW - Laser scanning microscopy (LSM) KW - Scanning acoustic microscopy (SAM) PY - 2018 DO - https://doi.org/10.1016/j.polymertesting.2018.08.014 SN - 0142-9418 SN - 1873-2348 VL - 70 SP - 544 EP - 555 PB - Elsevier AN - OPUS4-45766 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Schulte, Petra A1 - Lüth, Peter T1 - Zuverlässigkeit von sicherheitstechnischen Kenndaten - Validierung von Prüfmethoden durch Ringversuche N2 - Chemikalien werden im Prüflabor auf ihre gefährlichen Eigenschaften getestet, um die Risiken bei deren Handhabung richtig abschätzen zu können. Dazu sind Prüfmethoden entwickelt und veröffentlicht worden, die heute weltweit Anwendung finden. Auf die Validität der jeweiligen Prüfmethode und richtige Durchführung der Prüfung und Bewertung im Laboratorium müssen sich Hersteller, Importeure, Händler, Arbeitgeber oder Verbraucher verlassen können. Die Bundesanstalt für Materialforschung und –prüfung (BAM), Berlin hat eine langjährige Erfahrung sowohl bei der Ermittlung und Bewertung der physikalischen Gefahren von Chemikalien als auch bei der Einstufung und Kennzeichnung nach dem Chemikalienrecht (z.B. gemäß REACH-VO, CLP-VO, Gefahrgutvorschriften u.a.). Es werden drei Poster präsentiert, welche einerseits kritisch die im Rahmen der chemikalienrechtlichen Verfahren von den Registranten vorgelegten Prüfergebnisse / Prüfberichte bewerten und andererseits die Zuverlässigkeit von verschiedenen Prüfmethoden einschätzen bzw. den Aufwand am Beispiel der Validierung einer konkreten Prüfmethode durch Ringversuche demonstrieren. REACH-Registrierungsdossiers z.B. werden mit der Softwareanwendung IUCLID (International Uniform Chemical Information Database) erstellt. Für die Behörden ist die Bewertung der Zuverlässigkeit mit den Informationen zu den Studien im IUCLID-Dossiers oftmals schwer nachvollziehbar. Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. In den letzten 10 Jahren wurden von der BAM und der PTB Ringversuche zu verschiedenen Prüfmethoden durchgeführt. In allen Ringversuchen wurden deutliche Unterschiede zwischen den Ergebnissen der teilnehmenden Laboratorien festgestellt. Die Abweichungen der Prüfergebnisse wurden jedoch nicht nur durch Laborfehler, sondern auch durch Mängel der Prüfmethoden verursacht. Deshalb ist es wichtig zu wissen, wie gut die Prüfmethode ist, mit der ein Gefahrgut oder Gefahrstoff klassifiziert wird oder mit denen sicherheitstechnische Kenndaten bestimmt werden. Ringversuche werden bei der Methodenentwicklung und -validierung eingesetzt und können zur Ermittlung der Messunsicherheit genutzt werden. Validierungsberichte zu Prüfmethoden sorgen für Transparenz, sind für die Regulierung im Chemikalienrecht erforderlich und dienen auch dazu auf globaler Ebene gleiche Wettbewerbsbedingungen zu schaffen. Die BAM und die PTB unterstützen deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS, www.ceqat-dghs.bam.de). Dieses betreibt die BAM gemeinsam mit der PTB und der QuoData Gesellschaft für Qualitätsmanagement und Statistik mbH, Dresden. T2 - Behörden-Erfahrungsaustausch CY - Berlin, Germany DA - 04.06.2018 KW - REACH KW - CLP KW - Methodenvalidierung KW - Messunsicherheit KW - Ringversuch PY - 2018 AN - OPUS4-45809 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Wie sicher sind Labortests - Die Bedeutung von Ringversuchen zur Methodenvalidierung am Beispiel der Bestimmung des Selbstentzündungsverhaltens großer Feststoffschüttungen N2 - Für die Klassifizierung sowie die sichere Handhabung und Nutzung von Chemikalien und anderen Stoffen wurden spezielle standardisierte Testmethoden entwickelt, die weltweit zum Einsatz kommen. Die Ableitung von Sicherheitsmaßnahmen durch Experten erfordert, dass aus diesen Untersuchungen verlässliche Daten gewonnen werden. Ringversuche sind ein wesentliches Element bei der Methodenentwicklung (-validierung) und für die Qualitätssicherung von Laboratorien. Die Testmethode DIN EN 15188:2007 dient der Bestimmung des Selbstentzündungsverhaltens von Schüttgütern und Stäuben. Experimentelle Grundlage für die Beschreibung des Selbstentzündungsverhaltens eines bestimmten Materials ist die Bestimmung der Selbstentzündungstemperaturen (TSE) von Proben verschiedener Größen mit Hilfe isoperiboler Warmlagerungsversuche. Die so ermittelten Versuchsdaten ergeben die Abhängigkeit der Selbstentzündungstemperaturen vom Lagervolumen. Zweck einer schrittweise aufgebauten Serie von Ringversuchen und internen Labortests war die Identifizierung von Schwächen der bestehenden Methode bzw. von in der Laborpraxis auftretenden Mängeln bei der Anwendung der Methode, die Validierung der modifizierten und verbesserten Methode sowie die Bestimmung einer allgemeingültigen (Mess-)Unsicherheit dieser modifizierten Methode. T2 - Behörden-Erfahrungsaustausch CY - Berlin, Germany DA - 04.06.2018 KW - Selbstentzündung KW - Methodenvalidierung KW - Messunsicherheit KW - Ringversuch PY - 2018 AN - OPUS4-45814 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Lüth, Peter T1 - Wie sicher ist die Bestimmung des Selbstentzündungsverhaltens großer Feststoffschüttungen? T2 - Sichere Handhabung brennbarer Stäube 2017 N2 - Für die Klassifizierung sowie die sichere Handhabung und Nutzung von Chemikalien und anderen Stoffen wurden spezielle standardisierte Testmethoden entwickelt, die weltweit zum Einsatz kommen. Die Ableitung von Sicherheitsmaßnahmen durch Experten erfordert, dass aus diesen Untersuchungen verlässliche Daten gewonnen werden. Ringversuche sind ein wesentliches Element bei der Methodenentwicklung (-validierung) und für die Qualitätssicherung von Laboratorien. Die Testmethode DIN EN 15188:2007 dient der Bestimmung des Selbstentzündungsverhaltens von Schüttgütern und Stäuben. Experimentelle Grundlage für die Beschreibung des Selbstentzündungsverhaltens eines bestimmten Materials ist die Bestimmung der Selbstentzündungstemperaturen (TSE) von Proben verschiedener Größen mit Hilfe isoperiboler Warmlagerungsversuche. Die so ermittelten Versuchsdaten ergeben die Abhängigkeit der Selbstentzündungstemperaturen vom Lagervolumen. Zweck einer schrittweise aufgebauten Serie von Ringversuchen und internen Labortests war die Identifizierung von Schwächen der bestehenden Methode bzw. von in der Laborpraxis auftretenden Mängeln bei der Anwendung der Methode, die Validierung der modifizierten und verbesserten Methode sowie die Bestimmung einer allgemeingültigen (Mess-)Unsicherheit dieser modifizierten Methode. T2 - VDI-Fachtagung "Sichere Handhabung brennbarer Stäube" CY - Nürnberg, Germany DA - 24.10.2017 KW - Selbstentzündung KW - Methodenvalidierung KW - Messunsicherheit KW - Ringversuch PY - 2017 SN - 978-3-18092-314-7 SN - 0083-5560 VL - 2314 SP - 95 EP - 105 PB - VDI Verlag GmbH CY - Düsseldorf AN - OPUS4-45815 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Wu, D. A1 - Berghmans, J. T1 - Spontaneous ignition behaviour of coal dust accumulations: A comparison of extrapolation methods from lab-scale to industrial-scale JF - Proceedings of the Combustion Institute N2 - Smouldering fires and explosions arising from self-ignition of coal dust deposits represent a serious hazard for human being, environment and industry. It is essential for plant operators to know the conditions (temperature, duration and quantity) at which storage will be safe. In this work, self-ignition behaviour of three bituminous coal dusts in large scales are theoretically studied, based on the experimental data via a standardized hot-basket apparatus. A comprehensive 2-D transient model is developed, using a 2nd-order reaction kinetics considering both coal and oxygen consumptions, to investigate self-ignition parameters of coal dust accumulations. The numerical model shows a less conservative prediction compared with the steady-state methods. The computational self-ignition temperature and ignition delay time show a satisfaction agreement with lab-scale experimental results. In addition, the influences of ambient temperature and moisture content are analysed. The result shows that the moisture content delays the ignition and a small variation of the ambient temperature nearby the critical condition will lead to a large difference of the ignition delay time. KW - Spontanious ignition KW - Self-ignition KW - Extrapolation methods PY - 2019 DO - https://doi.org/10.1016/j.proci.2018.05.140 SN - 1540-7489 VL - 37 IS - 3 SP - 4181 EP - 4191 PB - Elsevier AN - OPUS4-47291 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Burkert, Andreas A1 - Babutzka, Martin T1 - Korrosionsschutz durch Deckschichtbildung und Passivität T2 - Tagungsband zur 18. Tagung "Korrosionsschutz in der maritimen Technik" N2 - Metallene Konstruktionswerkstoffe reagieren infolge ihres thermodynamisch instabilen Zustandes mehr oder weniger stark mit Stoffen aus der Umgebung. Eine große Rolle bei diesen Reaktionen spielt das Feuchtigkeitsangebot an der Metalloberfläche, welches nicht zwingend mit einem sichtbaren Wasserfilm einhergehen muss. An der Atmosphäre bilden sich an sauberen Metalloberflächen bei etwa 80 % relativer Luftfeuchte, bei versalzten Oberflächen auch schon ab etwa 25 % r. F., Feuchtfilme aus. Im Feuchtfilm laufen grundsätzlich die gleichen elektrochemischen Reaktionen ab, wie diese von wässrigen Medien bekannt sind. Dabei geht das Metall zunächst in Ionenform und in nachgelagerten Reaktionen in einen thermodynamisch stabilen Zustand in Form unterschiedlichster Oxid- und Hydroxidverbindungen über. Die so entstehenden Korrosionsprodukte können im Feuchtigkeitsfilm begrenzt löslich oder unlöslich sein und lagern sich auf den Oberflächen der Konstruktionswerkstoffe häufig als feste Korrosionsprodukte ab bzw. wachsen dort auf. Je nachdem wie die Korrosionsprodukte strukturell zum Untergrund passen, können sich dichte, sehr gut haftende Schichten ausbilden oder poröse, dicke Schichten ohne nennenswerte Haftung aufwachsen. Wachsen dichte, porenfreie Schichten mit guter Haftung auf, die im umgebenden Medium unlöslich sind, wird die weitere Auflösung des Metalls stark gehemmt. Man spricht dann von der Ausbildung schützender Deckschichten bzw. von Passivschichten auf welcher der Korrosionsschutz und damit die Dauerhaftigkeit vieler Konstruktionswerkstoffe beruhen. Kaesche bezeichnete die Passivität sehr treffend als „optimalen Grenzfall des Korrosionsschutzes durch Schichten von Korrosionsprodukten“. Aus technischer Sicht hält Kaesche eine Unterscheidung von Deckschichten bzw. Passivschichten für nicht zwingend erforderlich, da beide die Korrosionsgeschwindigkeit in gleichem Maß herabsetzen können. Die Übergänge zwischen den meist dickeren und dadurch sichtbaren Deckschichten und den meist dünnen, nicht sichtbaren Passivschichten sind fließend. T2 - 18. Tagung "Korrosionsschutz in der maritimen Technik" CY - Hamburg, Germany DA - 30.01.2019 KW - Korrosionsschutz KW - Überzüge KW - Deckschichten KW - Passivität PY - 2019 SN - 978-3-935406-70-3 VL - 18 SP - 25 EP - 38 AN - OPUS4-47307 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Manso, M. A1 - Pessanha, S. A1 - Guerra, M. A1 - Reinholz, Uwe A1 - Afonso, C. A1 - Radtke, Martin A1 - Lourenco, H. A1 - Carvalho, M. L. A1 - de Oliveira Guilherme Buzanich, Ana T1 - Assessment of Toxic Metals and Hazardous Substances in Tattoo Inks Using Sy-XRF, AAS, and Raman Spectroscopy JF - Biological Trace Element Research N2 - Synchrotron radiation X-ray fluorescence spectroscopy, in conjunction with atomic absorption and Raman spectroscopy, was used to analyze a set of top brand tattoo inks to investigate the presence of toxic elements and hazardous substances. The Cr, Cu, and Pb contents were found to be above the maximum allowed levels established by the Council of Europe through the resolution ResAP(2008)1 on requirements and criteria for the safety of tattoos and permanent makeup. Raman analysis has revealed the presence of a set of prohibited substances mentioned in ResAP(2008)1, among which are the pigments Blue 15, Green 7, and Violet 23. Other pigments that were identified in white, black, red, and yellow inks are the Pigment White 6, Carbon Black, Pigment Red 8, and a diazo yellow, respectively. The present results show the importance of regulating tattoo ink composition. KW - Synchrotron KW - Tattoo inks KW - XRF KW - Toxic metals KW - Hazardous substances PY - 2019 DO - https://doi.org/10.1007/s12011-018-1406-y VL - 187 IS - 2 SP - 596 EP - 601 PB - Springer AN - OPUS4-47369 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Erdmann, Maren A1 - Böhning, Martin A1 - Niebergall, Ute T1 - Physical and chemical effects of biodiesel storage on high-density polyethylene: Evidence of co-oxidation JF - Polymer Degradation and Stability N2 - The physical and chemical effects of diesel and biodiesel fuels on two high-density polyethylene (PE-HD) types were investigated. Both semi-crystalline PE-HD are common thermoplastic materials for container and storage tank applications. Biodiesel, a composition of unsaturated fatty acid esters from renewable resources, was chosen as it is regarded a possible green alternative to fossil fuels. The study aims at identifying significant differences between biodiesel and conventional diesel fuels based on the differences in the chemical nature of the two. The physical effects of the fuels on the polymer at first comprises the sorption behavior, i.e. kinetics and final equilibrium concentration. Not only are both fuels absorbed by the amorphous phase of the semi-crystalline PE-HD, they also induce a plasticization effect that modifies the molecular mobility and therefore also the characteristic yielding properties, manifest in the obtained stress-strain curves. The chemical effects related to degradation phenomena is investigated by a long-term storage scenario using partially immersed tensile test specimens in diesel and biodiesel. We were able to confirm the proposed co-oxidation mechanism by Richaud et al. for polyethylene-unsaturated penetrant systems on a larger scale based on practical tensile tests. One of the investigated polyethylene grades subjected to tensile drawing showed a significant loss of plastic deformation and the onset of premature failure after 150 days of storage in biodiesel. Further biodiesel storage showed a systematically reduced elongation at break before necking. None of these effects were observed in diesel. Oxidation of fuels and polymer after progressing storage times were analyzed by the evolution of carbonyl species in FT-IR/ATR spectroscopy. KW - Biodiesel KW - Degradation KW - Long-term storage KW - Sorption KW - Diesel PY - 2019 DO - https://doi.org/10.1016/j.polymdegradstab.2019.01.018 SN - 0141-3910 VL - 161 IS - 1 SP - 139 EP - 149 PB - Elsevier CY - Amsterdam AN - OPUS4-47268 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kulow, Anicó A1 - Witte, S. A1 - Beyer, S. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, H. A1 - Streli, C. T1 - A new experimental setup for time- and laterally-resolved X-ray absorption fine structure spectroscopy in a 'single shot' JF - Journal of Analytical Atomic Spectrometry N2 - In this work, a new setup for dispersive XAFS measurements is presented. This reproducible and scanningfree setup yields both time- and laterally-resolved XAFS experiments in a ‘single-shot’. It allows a straightforward adjustment for probing different elements covering many relevant applications in materials science. An incoming energetic broadband beam is diffracted by a Si (111) crystal after passing through the sample and collected by an area sensitive detector. Depending on the energy range of the incoming beam, XANES and/or EXAFS spectra can be recorded with a time resolution down to 1 s. The feasibility of this setup was demonstrated at the BAMline at BESSY II (Berlin, Germany) with reference Fe and Cu foils and the results are hereby presented and discussed. Additionally, an application where time resolution on the second scale is required is briefly evaluated. The presented example concerns studying early stages of zinc(II)2-methylimidazolate (ZIF-8) crystallization. This is particularly important for biomedical applications. KW - X-ray spectroscopy KW - X-ray absorption fine structure KW - Time-resolved KW - Laterally-resolved KW - Experimental setup PY - 2019 DO - https://doi.org/10.1039/c8ja00313k SN - 0267-9477 SN - 1364-5544 VL - 34 IS - 1 SP - 239 EP - 246 PB - Royal Society of Chemistry CY - London AN - OPUS4-47207 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heise, Svenja A1 - Burkert, Andreas T1 - Normentwurf für ein Prüfverfahren zur Bestimmung von Deckschichtwiderständen an Zinküberzügen mittels gelartiger Elektrolyte N2 - Der Vortrag stellt das WIPANO-Vorhaben GELELEK vor. Zu Beginn werden die Messtechnik und die Projektidee kurz erläutert. Anschließend wird ein Überblick über die Projektpartner, Projektziele und Arbeitsschritte gegeben. T2 - 12. Sitzung des NA 062-01-77 AA "Korrosionsprüfverfahren" CY - Berlin, Germany DA - 20.02.2019 KW - Korrosion KW - Zinküberzüge KW - Gelartige Elektrolyte KW - Deckschichtbildung PY - 2019 AN - OPUS4-47416 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Loewer, M. A1 - Guenther, T. A1 - Igel, J. A1 - Kruschwitz, Sabine A1 - Martin, T. A1 - Wagner, N. T1 - Ultra-broad-band electrical spctroscopy of soils and sediments - a combined permittivity and conductivity model JF - Geophsical Journal International N2 - We combined two completely different methods measuring the frequency-dependent electrical properties of moist porous materials in order to receive an extraordinary large frequency spectrum. In the low-frequency (LF) range, complex electrical resistivity between 1 mHz and 45 kHz was measured for three different soils and sandstone, using the spectral induced polarization (SIP) method with a four electrode cell. In the high-frequency (HF) radio to microwave range, complex dielectric permittivity was measured between 1MHz and 10 GHz for the same samples using dielectric spectroscopy by means of the coaxial transmission line technique. The combined data sets cover 13 orders of magnitude and were transferred into their equivalent expressions: the complex effective dielectric permittivity and the complex effective electrical conductivity.We applied the Kramers-Kronig relation in order to justify the validity of the data combination. A new phenomenological model that consists of both dielectric permittivity and electrical conductivity terms in a Debye- and Cole–Cole-type manner was fitted to the spectra. The combined permittivity and conductivity model accounts for the most common representations of the physical quantities with respect to the individual measuring method. A maximum number of four relaxation processes was identified in the analysed frequency range. Among these are the free water and different interfacial relaxation processes, the Maxwell-Wagner effect, the counterion relaxation in the electrical double layer and the direct-current electrical conductivity. There is evidence that free water relaxation does not affect the electrical response in the SIP range. Moreover, direct current conductivity contribution (bulk and interface) dominates the losses in the HF range. Interfacial relaxation processes with relaxations in the HF range are broadly distributed down to the LF range. The slowest observed process in the LF range has a minor contribution to the HF response. KW - Electrical properties KW - Permeability KW - Porosity KW - Hydrogeophysics PY - 2017 DO - https://doi.org/10.1093/gji/ggx242 VL - 210 IS - 3 SP - 1360 EP - 1373 PB - Oxford University Press CY - Oxford AN - OPUS4-42598 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Gebhard, R. T1 - Synchrotron radiation–induced X-ray fluorescence (SRXRF) analyses of the Bernstorf Gold JF - Archeometry N2 - The gold finds from Bernstorf, in the Freising district of Bavaria, were discovered in 1998, in the area of a Bronze Age settlement. First analyses with X-ray fluorescence (XRF) revealed gold of an unusually high purity grade, which was explained by the use of cementation techniques. A newer analysis with laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) indicated an even higher purity. The analytical results were the starting point of an ongoing discussion. In this study, we re-analysed 11 gold samples with Synchrotron radiation–induced X-ray fluorescence at the BAMline at BESSY. In a thorough analysis, different excitation and detection conditions were applied to confirm or disprove the previous results. It was shown that the purity of the gold from the specimen is higher than 99.9%. The main impurities are silver in a range between 20 and 200 μg/g and copper between 1 and 10 μg/g. The results are in very good agreement with the LA–ICP–MS measurements and provide basic information for discussions about provenance, processing techniques or considerations of authenticity. KW - Gold KW - Synchrotron KW - XRF KW - BESSY KW - Archeometry PY - 2017 DO - https://doi.org/10.1111/arcm.12294 SN - 0003-813X SN - 1475-4754 VL - 59 IS - 5 SP - 891 EP - 899 PB - Wiley AN - OPUS4-42540 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Martin-Sanchez, Pedro Maria A1 - Gorbushina, Anna A1 - Toepel, Jörg T1 - Quantification of microbial load in diesel storage tanks using culture- and qPCR-based approaches JF - International Biodeterioration & Biodegradation N2 - Microbial contamination of fuels, associated with a wide variety of bacteria and fungi, leads to decreased product quality and can compromise equipment performance by biofouling and microbiologically influenced corrosion of pipelines and storage tanks. Detection and quantification of biomass are critical in monitoring fuel systems for an early detection of microbial outbreaks. The aims of this study are (i) to quantify bacterial and fungal contamination in samples from diesel storage tanks of petrol stations, using both culture dependent- and culture independent (qPCR) approaches, and (ii) to analyse the diversity of cultivable diesel-contaminating microorganisms with the purpose to create a strain collection for further use in biodeterioration experiments. Both methodological approaches revealed a high microbial contamination in all studied samples, with the bacterial load being much higher than the fungal load. The diversity of cultivable microorganisms was rather low. Based on criteria of abundance and fuel degradation potential, the most relevant microorganisms were identified as bacteria of genera Bacillus, Citrobacter, Burkholderia and Acetobacter, the filamentous fungi Paecilomyces variotii and Pseudallescheria boydii, and a Dipodascaceae yeast. Furthermore the validity and utility of qPCR-based methods are discussed. KW - Fuel contamination KW - Biofouling KW - Cultivation KW - Real-time qPCR KW - Bacteria KW - Fungi PY - 2016 DO - https://doi.org/10.1016/j.ibiod.2016.04.009 SN - 0964-8305 SN - 1879-0208 VL - 126 SP - 216 EP - 223 PB - Elsevier Ltd. AN - OPUS4-41260 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Verhalten des Celluloids bei mechanischer und physikalischer Beanspruchung - Brennversuche JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 95 EP - 96 PB - Verl. Chemie CY - Berlin AN - OPUS4-42014 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Verhalten des Celluloids bei mechanischer und physikalischer Beanspruchung - Verbrennungsgeschwindigkeit JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 96 EP - 96 PB - Verl. Chemie CY - Berlin AN - OPUS4-42017 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Verhalten des Celluloids bei mechanischer und physikalischer Beanspruchung - Flammenlose Zersetzung JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 97 EP - 97 PB - Verl. Chemie CY - Berlin AN - OPUS4-42019 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Verhalten des Celluloids bei mechanischer und physikalischer Beanspruchung - Brandversuche JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 97 EP - 100 PB - Verl. Chemie CY - Berlin AN - OPUS4-42020 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Prüfung der Festigkeit von Celluloid- und Filmverpackungen JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 100 EP - 102 PB - Verl. Chemie CY - Berlin AN - OPUS4-42023 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Schweißtechnische Arbeiten - Aufnahme von Schwefel und Phosphor durch Eisen und Stahl beim Schweißen mit ungereinigtem Acetylen - Theoretische Betrachtungen JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 83 EP - 85 PB - Verl. Chemie CY - Berlin AN - OPUS4-42001 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Schweißtechnische Arbeiten - Aufnahme von Schwefel und Phosphor durch Eisen und Stahl beim Schweißen mit ungereinigtem Acetylen - Praktische Versuche JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 85 EP - 86 PB - Verl. Chemie CY - Berlin AN - OPUS4-42003 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Schweißtechnische Arbeiten - Aufnahme von Schwefel und Phosphor durch Eisen und Stahl beim Schweißen mit ungereinigtem Acetylen - Zusammenfassung JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 86 EP - 86 PB - Verl. Chemie CY - Berlin AN - OPUS4-42005 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Schweißtechnische Arbeiten - Bewertung des Druckunterschiedes von Acetylen und Sauerstoff im Brenner auf die Wirtschaftlichkeit und Güte der Schweißnaht JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 87 EP - 90 PB - Verl. Chemie CY - Berlin AN - OPUS4-42006 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 90 EP - 91 PB - Verl. Chemie CY - Berlin AN - OPUS4-42008 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Chemische Untersuchungen JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 91 EP - 92 PB - Verl. Chemie CY - Berlin AN - OPUS4-42009 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Verhalten des Celluloids bei mechanischer und physikalischer Beanspruchung JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 93 EP - 93 PB - Verl. Chemie CY - Berlin AN - OPUS4-42010 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Verhalten des Celluloids bei mechanischer und physikalischer Beanspruchung - Reibungs- und Stoßempfindlichkeit JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 93 EP - 94 PB - Verl. Chemie CY - Berlin AN - OPUS4-42011 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit von Celluloid- und Filmmaterial - Verhalten des Celluloids bei mechanischer und physikalischer Beanspruchung - Entzündlichkeit des Celluloids JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 94 EP - 95 PB - Verl. Chemie CY - Berlin AN - OPUS4-42012 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Prüfung von mit Beschleunigern vulkanisiertem Gummi JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 68 EP - 69 PB - Verl. Chemie CY - Berlin AN - OPUS4-42392 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Versuche über die Verhütung des Werfens von Schaftsteifen aus Transparentleder beim Durchnässen JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 69 EP - 70 PB - Verl. Chemie CY - Berlin AN - OPUS4-42394 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Einfluß der Verunreinigungen von Sauerstoff auf die Wirtschaftlichkeit und Güte der Schweißnaht und des Schnittes JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 36 EP - 37 PB - Verl. Chemie CY - Berlin AN - OPUS4-42281 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Das Schneiden mit Sauerstoff JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 37 EP - 39 PB - Verl. Chemie CY - Berlin AN - OPUS4-42282 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Prüfung von Wasservorlagen auf ihre Geeignetheit für die Sicherung von Azetylen-Hochdruckleitungen JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 36 EP - 40 PB - Verl. Chemie CY - Berlin AN - OPUS4-42400 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Prüfung von Vorlagen für Niederdruck-Apparate JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 40 EP - 43 PB - Verl. Chemie CY - Berlin AN - OPUS4-42402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Versuche zur Ermittlung der Explosionsfähigkeit von Azetylen-Wasserdampfgemischen JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 43 EP - 47 PB - Verl. Chemie CY - Berlin AN - OPUS4-42403 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Versuche an der Azetylenrußanlage der Firma Hostmann-Steinberg'sche Farbenfabriken G.m.b.H., Celle JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 47 EP - 48 PB - Verl. Chemie CY - Berlin AN - OPUS4-42404 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Versuche an der Azetylenrußanlage der Firma Hostmann-Steinberg'sche Farbenfabriken G.m.b.H., Celle - Analytische Bestimmung der Gase JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 48 EP - 48 PB - Verl. Chemie CY - Berlin AN - OPUS4-42406 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Versuche an der Azetylenrußanlage der Firma Hostmann-Steinberg'sche Farbenfabriken G.m.b.H., Celle - Qualitative Versuche zur Ermittelung der Art des Reaktionsverlaufes (Explosion oder Detonation) aus der Stärke der Schläge bei verschiedenen Anfangsdrucken und Gemischen JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 48 EP - 50 PB - Verl. Chemie CY - Berlin AN - OPUS4-42408 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Versuche an der Azetylenrußanlage der Firma Hostmann-Steinberg'sche Farbenfabriken G.m.b.H., Celle - Messung der Explosionsdrucke von reinem Azetylen und Azetylen-Ölgasmischungen bei verschiedenen Anfangsdrucken JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 50 EP - 51 PB - Verl. Chemie CY - Berlin AN - OPUS4-42409 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Versuche an der Azetylenrußanlage der Firma Hostmann-Steinberg'sche Farbenfabriken G.m.b.H., Celle - Berechnung der Rußausbeuten JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 51 EP - 51 PB - Verl. Chemie CY - Berlin AN - OPUS4-42410 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Versuche an der Azetylenrußanlage der Firma Hostmann-Steinberg'sche Farbenfabriken G.m.b.H., Celle - Zusammenfassung JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 51 EP - 52 PB - Verl. Chemie CY - Berlin AN - OPUS4-42411 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Schweißtechnische Arbeiten - Zünd- oder Fortpflanzungsgeschwindigkeit von Azetylen-Sauerstoff-Gemischen. Das Zurückschlagen der Schweißbrenner JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 52 EP - 60 PB - Verl. Chemie CY - Berlin AN - OPUS4-42412 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Schweißtechnische Arbeiten - Einfluß der Druckverhältnisse im Azetylen-Sauerstoff-Schweißbrenner auf die Wirtschaftlichkeit und Güte der Schweißung JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 60 EP - 64 PB - Verl. Chemie CY - Berlin AN - OPUS4-42414 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit unbelichteter photographischer Filme in der handelsüblichen Packung und in üblichen Versandkisten JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 64 EP - 66 PB - Verl. Chemie CY - Berlin AN - OPUS4-42417 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit unbelichteter photographischer Filme in der handelsüblichen Packung und in üblichen Versandkisten - Ausgeführte Versuche JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 66 EP - 67 PB - Verl. Chemie CY - Berlin AN - OPUS4-42418 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Versuchsanordnung zur Ermittelung der Zersetzungsprodukte von Tetrachlorkohlenstoff - Karbidbrände JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 60 EP - 62 PB - Verl. Chemie CY - Berlin AN - OPUS4-42376 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Quantitative titrimetrische Bestimmung geringer Mengen von Tetrachlorkohlenstoff JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 62 EP - 63 PB - Verl. Chemie CY - Berlin AN - OPUS4-42377 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Versuche zur Bestimmung der freien Schwefelsäure im Leder JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 63 EP - 66 PB - Verl. Chemie CY - Berlin AN - OPUS4-42379 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Vergleichende Versuche mit Collonil und Gilgschem Lederöl JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 66 EP - 68 PB - Verl. Chemie CY - Berlin AN - OPUS4-42380 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Prüfung poröser Massen für Azetylenflaschen zwecks Feststellung der Sicherheit bei der Herstellung, beim Transport und im Verkehr JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 33 EP - 34 PB - Verl. Chemie CY - Berlin AN - OPUS4-42384 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Azetylen - Ermittelung der Ursachen bei der Explosion von Azetylenflaschen JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 34 EP - 35 PB - Verl. Chemie CY - Berlin AN - OPUS4-42385 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Arbeiten, betr. die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Über einen silberfreien Kinofilm JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 55 EP - 57 PB - Verl. Chemie CY - Berlin AN - OPUS4-42370 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Prüfung von Handfeuerlöschern unter besonderer Berücksichtigung der pyrogenen Zersetzungsprodukte der Löschmittel JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 57 EP - 59 PB - Verl. Chemie CY - Berlin AN - OPUS4-42372 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Versuchsanordnung zur Ermittelung der Zersetzungsprodukte von Tetrachlorkohlenstoff - Ölbrände JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 59 PB - Verl. Chemie CY - Berlin AN - OPUS4-42373 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Versuchsanordnung zur Ermittelung der Zersetzungsprodukte von Tetrachlorkohlenstoff - Benzolbrände JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 59 EP - 60 PB - Verl. Chemie CY - Berlin AN - OPUS4-42375 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Reinemann, Steffi A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Einfluss von Korundschleifprozessen auf die Korrosionsbeständigkeit nichtrostender Stähle N2 - Das Poster stellt aktuelle Eregbnisse des AiF-Vorhabens 18823 N/1 zum Einfluss von Schleifprozessen auf die Korrosionsbeständigkeit nichtrostender Stähle vor. T2 - Jahrestagung 2017 der GfKORR CY - Frankfurt a. M., Germany DA - 07.11.2017 KW - Korrosion KW - Corrosion KW - Korundschleifen KW - Corundum grinding KW - Nichtrostende Stähle KW - Stainless Steels PY - 2017 AN - OPUS4-42773 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten an Zink - Eine innovative Prüfmethodik N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität der gebildeten Deckschichten erlauben. In diesem Beitrag wird anhand verschiedener Deckschichtzustände an Zink der Mehrwert von gelartigen Elektrolyten für die Korrosionsforschung verdeutlicht. T2 - AK-Sitzung der GfKORR AK "Einstieg in die Korrosion" CY - Frankfurt a. M., Germany DA - 07.11.0217 KW - Deckschichtbildung KW - Layer formation KW - Gelartige Elektrolyte KW - Gel-type electrolytes KW - Korrosionsprüfung KW - Corrosion testing KW - Zinkdeckschichten KW - Zinc coatings PY - 2017 AN - OPUS4-42775 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Prüfung poröser Massen für Acetylenflaschen zwecks Feststellung der Sicherheit bei der Herstellung, beim Transport und im Verkehr JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 45 EP - 46 PB - Verl. Chemie CY - Berlin AN - OPUS4-41805 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Prüfung von Wasservorlagen auf ihre Brauchbarkeit als Sicherung von Acetylen-Hochdruckleitungen JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 46 EP - 56 PB - Verl. Chemie CY - Berlin AN - OPUS4-41808 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Ermittelung der Ursachen von Explosionen bei einer Anzahl von Acetylenflaschen JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 21 PB - Verl. Chemie CY - Berlin AN - OPUS4-42275 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Prüfung von Wasservorlagen auf ihre Brauchbarkeit als Sicherung von Acetylen-Hochdruckapparaten, Wirkungsweise der Wasservorlagen und Beschreibung der Vorrichtungen zur Prüfung von Wasservorlagen JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 21 EP - 30 PB - Verl. Chemie CY - Berlin AN - OPUS4-42276 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Die Beseitigung der Explosionsgefahr des Narcylen-Betäubungsapparates aus inneren Ursachen JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 31 EP - 32 PB - Verl. Chemie CY - Berlin AN - OPUS4-42277 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Die Entzündungstemperaturen von Acetylen-Sauerstoff- und Acetylen-Luftgemischen, Beschreibung einer Apparatur zur Messung der Entzündungstemperaturen von Gasgemischen und Bestimmung der Entzündungstemperaturen in Abhängigkeit vom Mischungsverhältnis JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 32 EP - 36 PB - Verl. Chemie CY - Berlin AN - OPUS4-42278 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Einfluß der Sauerstoff-Reinheit auf die Schnittleistung JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 39 EP - 42 PB - Verl. Chemie CY - Berlin AN - OPUS4-42300 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Einfluß der Vorwärmung des Sauerstoffs JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 42 EP - 45 PB - Verl. Chemie CY - Berlin AN - OPUS4-42301 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Veränderung des Gefüges in der Nähe der Schnittflächen JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 45 EP - 47 PB - Verl. Chemie CY - Berlin AN - OPUS4-42302 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Einfluß der Gasverunreinigungen auf die Schweißnaht JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 48 PB - Verl. Chemie CY - Berlin AN - OPUS4-42303 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Die Feuchtigkeit im handelsüblichen Sauerstoff JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 48 EP - 49 PB - Verl. Chemie CY - Berlin AN - OPUS4-42304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Versuche über die Aufnahme von Dimethylsulfat in die Eisenbahnverkehrsordnung JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 49 EP - 52 PB - Verl. Chemie CY - Berlin AN - OPUS4-42305 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Versuche über die Selbstentzündlichkeit von mit Leinöl imprägnierter Schnur JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 52 EP - 53 PB - Verl. Chemie CY - Berlin AN - OPUS4-42306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Äußerung über zweckmäßige Lagerung von Werg JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 53 EP - 54 PB - Verl. Chemie CY - Berlin AN - OPUS4-42308 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Prüfung von Cellonlacken mit Rücksicht auf ihre Versendbarkeit als nicht feuergefährliche Lösungen JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 54 PB - Verl. Chemie CY - Berlin AN - OPUS4-42309 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Teilnahme an der Aufstellung von Lieferungsbedingungen JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 93 EP - 94 PB - Verl. Chemie CY - Berlin AN - OPUS4-42683 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Untersuchung und Begutachtung verschiedener Rohstoffe und Materialien JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 94 EP - 94 PB - Verl. Chemie CY - Berlin AN - OPUS4-42684 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Prüfung von Lederkonservierungs- und Dichtungsmitteln JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 89 EP - 89 PB - Verl. Chemie CY - Berlin AN - OPUS4-42667 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Prüfung von Lederkonservierungs- und Dichtungsmitteln - Zusammensetzung der Imprägnierungsmittel JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 89 EP - 89 PB - Verl. Chemie CY - Berlin AN - OPUS4-42671 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Prüfung von Lederkonservierungs- und Dichtungsmitteln - Bestimmungen der Wasserdurchlässigkeit JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 90 EP - 91 PB - Verl. Chemie CY - Berlin AN - OPUS4-42672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Prüfung von Lederkonservierungs- und Dichtungsmitteln - Prüfung der Abnutzbarkeit von Leder JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 91 EP - 92 PB - Verl. Chemie CY - Berlin AN - OPUS4-42674 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Prüfung von Lederkonservierungs- und Dichtungsmitteln - Chemische Versuche zur Feststellung etwaiger Veränderungen des Leders durch Imprägnierungsmittel JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 92 EP - 92 PB - Verl. Chemie CY - Berlin AN - OPUS4-42675 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Versuche zur Herstellung einer für die Abstempelung von Spielkarten geeigneten Stempelfarbe JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 92 EP - 93 PB - Verl. Chemie CY - Berlin AN - OPUS4-42676 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Untersuchung von mit Indanthrenfarben getarnten Geweben JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 70 EP - 71 PB - Verl. Chemie CY - Berlin AN - OPUS4-42518 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Versuche betr. Verbilligung eines neuartigen Reinigungsmittels für Tuchbekleidungsstücke JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 71 PB - Verl. Chemie CY - Berlin AN - OPUS4-42519 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Mitarbeit bei der Aufstellung von Lieferungsbedingungen für Werkstoffe JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 71 EP - 72 PB - Verl. Chemie CY - Berlin AN - OPUS4-42520 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Untersuchung und Begutachtung verschiedener Rohstoffe und Materialien JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 72 PB - Verl. Chemie CY - Berlin AN - OPUS4-42521 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schilling, Markus A1 - Niebergall, Ute A1 - Böhning, Martin T1 - Full notch creep test (FNCT) of PE-HD – Characterization and differentiation of brittle and ductile fracture behavior during environmental stress cracking (ESC) JF - Polymer Testing N2 - The damage mechanisms slow crack growth (SCG) and environmental stress cracking (ESC), relevant for PE-HD materials are characterized based on improved full notch creep testing (FNCT) of two selected typical PE-HD materials for container applications. In this context, a distinction of the failure mechanisms as well as a categorization of involved media is suggested. Employing a novel FNCT device, elongation data were obtained in addition to conventional time-to-failure results of stress-dependent as well as temperature-dependent measurements. Changes in failure behavior, as determined by fracture surface analysis based on light microscopy (LM) and laser scanning microscopy (LSM), are correlated with FNCT results and used to introduce an additional possibility for the identification of brittle/ductile fracture behavior. KW - Environmental stress cracking (ESC) KW - Slow crack growth (SCG) KW - Full notch creep test (FNCT) KW - High-density polyethylene (PE-HD) PY - 2017 DO - https://doi.org/10.1016/j.polymertesting.2017.09.043 SN - 0142-9418 SN - 1873-2348 VL - 64 SP - 156 EP - 166 PB - Elsevier CY - Amsterdam AN - OPUS4-42484 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transportsicherheit unbelichteter photographischer Filme in der handelsüblichen Packung und in üblichen Versandkisten - Zusammenfassung JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 67 EP - 67 PB - Verl. Chemie CY - Berlin AN - OPUS4-42420 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transport brennbarer Flüssigkeiten - Prüfung von Weißblechkannen JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 67 EP - 68 PB - Verl. Chemie CY - Berlin AN - OPUS4-42422 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transport brennbarer Flüssigkeiten - Prüfung des Verhaltens brennbarer, mehr als 30% feste gelöste oder aufgeschlämmte Stoffe enthaltende Flüssigkeiten beim Eisenbahn- und Seetransport JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 68 EP - 71 PB - Verl. Chemie CY - Berlin AN - OPUS4-42434 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Versuche über die Gefährlichkeit der Darstellung und die Transport- und Handhabungssicherheit von chlorzyanhaltiger Blausäure und über ein neues Aufsaugmaterial JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 71 EP - 79 PB - Verl. Chemie CY - Berlin AN - OPUS4-42435 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Über explosionssichere Schmiermittel JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 79 EP - 80 PB - Verl. Chemie CY - Berlin AN - OPUS4-42436 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Prüfung von Handfeuerlöschverfahren unter besonderer Berücksichtigung der pyrogenen Zersetzungsprodukte der Löschmittel JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 80 EP - 84 PB - Verl. Chemie CY - Berlin AN - OPUS4-42437 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Ergebnisse von Versuchen über das Verhalten von Leder gegen freie Schwefelsäure - Versuche mit Blankleder JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 84 EP - 86 PB - Verl. Chemie CY - Berlin AN - OPUS4-42439 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Ergebnisse von Versuchen über das Verhalten von Leder gegen freie Schwefelsäure - Versuche mit Kalbleder JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 86 EP - 88 PB - Verl. Chemie CY - Berlin AN - OPUS4-42441 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Prüfung von Lederkonservierungs- und Dichtungsmitteln JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 89 EP - 89 PB - Verl. Chemie CY - Berlin AN - OPUS4-42444 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Prüfung von Lederkonservierungs- und Dichtungsmitteln - Zusammensetzung der Imprägnierungsmittel JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 89 EP - 89 PB - Verl. Chemie CY - Berlin AN - OPUS4-42445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über Leder und Lederschutzmittel - Prüfung von Lederkonservierungs- und Dichtungsmitteln - Bestimmungen der Wasserdurchlässigkeit JF - Jahresbericht VIII der Chemisch-Technischen Reichsanstalt - 1929 PY - 1930 SN - 0368-1785 VL - VIII SP - 90 EP - 91 PB - Verl. Chemie CY - Berlin AN - OPUS4-42446 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Müller, Thoralf A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Field exposure studies under sheltered and unsheltered conditions at different test sites in northern and eastern Germany N2 - A series of field exposure tests according to ISO 9223 and 9226 was carried out at different locations to determine the corrosivity of different test sites throughout northern and eastern Germany. Standard test specimens of steel, zinc, copper and aluminium were exposed to rural, city and maritime atmosphere at test sites of the Federal Institute for Materials Research and Testing. Test sites at city atmosphere comprised exposure on a rooftop, next to a highly frequented road and directly at a motorway. Exposure under maritime conditions was carried out at Heligoland in the North Sea and at the North Sea coastline on Sylt. The specimens were stored under sheltered and unsheltered conditions on each test site, respectively. Corrosion rates after the first year of field exposure were determined and used for the classification of the atmospheres and the test sites regarding the corrosivity. The presentation will show the results of the systematic study. First year corrosion rates for steel, zinc, copper and aluminium will be presented and discussed with respect to the type of material, the atmospheric conditions and the time of wetness at the test sites. In addition, the difference between sheltered and unsheltered conditions will be discussed. T2 - EUROCORR 2018 CY - Krakow, Poland DA - 09.09.2018 KW - Standardproben KW - Standard test samples KW - Freibewitterungsprüfung KW - Field exposure studies PY - 2018 AN - OPUS4-45941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Patrick P. A1 - Hüllmann, Dino A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Kohlhoff, Harald A1 - Lilienthal, A. J. T1 - Gas Tomography Up In The Air! T2 - Proceedings of the IEEE Sensors 2018 N2 - In this paper, we present an autonomous aerial robot to reconstruct tomographic 2D slices of gas plumes in outdoor environments. Our platform, the so-called Unmanned Aerial Vehicle for Remote Gas Sensing (UAV-REGAS) combines a lightweight Tunable Diode Laser Absorption Spectroscopy (TDLAS) sensor with a 3-axis aerial stabilization gimbal for aiming on a versatile octocopter. The TDLAS sensor provides integral gas concentration measurements but no information regarding the distance traveled by the laser diode's beam or the distribution of the gas along the optical path. We complemented the set-up with a laser rangefinder and apply principles of Computed Tomography (CT) to create a model of the spatial gas distribution from these integral concentration measurements. To allow for a rudimentary ground truth evaluation of the applied gas tomography algorithm, we set up a unique outdoor test environment based on two 3D ultrasonic anemometers and a distributed array of 10 infrared gas transmitters. We present first results showing the 2D plume reconstruction capabilities of the system under realistic conditions. T2 - IEEE Sensors 2018 CY - New Delhi, India DA - 28.10.2018 KW - Aerial robot KW - TDLAS KW - Gas tomography KW - Plume PY - 2018 SN - 978-1-5386-4707-3 SP - 396 EP - 398 PB - IEEE AN - OPUS4-46477 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin T1 - Von Ägypten bis Hiddensee – Analyse von Gold mit Synchrotronstrahlung - Update 2018 N2 - Gold ist eines der sieben schon im Altertum bekannten Metalle und wurde wg. seines Glanzes und seiner Seltenheit von alters her als Tauschmittel und zur Herstellung von Schmuck benutzt. Außerdem ist es einfach bearbeitbar und weitestgehend gegen chemische Einflüsse resistent. Die Untersuchungen von Gold mit synchrotronstrahlungsangeregter Röntgenfluoreszenzanalyse sind zerstörungsfrei und geben Auskunft über die in der untersuchten Probe vorhandenen chemischen Elemente. Bei den hier vorgestellten Untersuchungen an der BAMline stehen Fragestellungen wie Herkunft, Herstellungsverfahren und Zusammengehörigkeit von Goldfunden im Vordergrund. Die verschiedenen Fragestellungen werden an einer Reihe von Beispielen erläutert die vom Wikingerschatz aus Hiddensee über die Himmelsscheibe von Nebra bis hin zu Funden aus Ägypten langen. Zusätzlich werden die modernen Messmethoden vorgestellt, die am Synchrotron heutzutage zur Verfügung stehen. T2 - Vorlesung FU Berlin Einführung in die Archäometrie CY - Berlin, Germany DA - 01.11.2018 KW - Gold KW - Synchrotron KW - XRF KW - BAMline PY - 2018 AN - OPUS4-46451 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas T1 - Prüfverfahren zur Bewertung der kathodischen Enthaftung bei organischen Beschichtungen – Eine kritische Betrachtung N2 - Im Vortrag werden mit Blick auf die geltenden Regelwerke und Normen die Unterschiede verschiedener Prüfmethoden zur kathodischen Enthaftung bei organischen Beschichtungen vorgestellt und deren Aussagekraft kritisch betrachtet. Am Beispiel von systematischen Versuchsreihen an einem Kurzzeittest werden die Grenzen einiger Methoden herausgearbeitet und die Anwendbarkeit für Reparaturbeschichtungen in Offshore-Bereich ausgelotet. T2 - Arbeitskreissitzung des DIN-Arbeitskreises NA 002-00-07-17 AK „Elektrochemische Verfahren“ CY - Bremerhaven, Germany DA - 07.11.2018 KW - Kathodische Enthaftung KW - Korrosionsprüfung KW - Organische Beschichtungen KW - Cathodic delamination KW - Corrosion testing KW - Organic coatings PY - 2018 AN - OPUS4-46514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Vorstellung des Programms WIPANO sowie aktueller Projektskizzen der BAM im Fachbereich 7.6 N2 - Der Vortrag erläutert die Förderschwerpunkte der Förderinitiative WIPANO des BMWi und zeigt aktuelle Projektskizzen sowie Projekte des Fachbereiches 7.6. T2 - Arbeitskreissitzung „Korrosionsuntersuchung und -überwachung“ des GfKORR e. V. CY - Berlin, Germany DA - 08.10.2018 KW - Korrosion KW - Corrosion KW - Zink KW - Spannstahl KW - KorroPad PY - 2018 AN - OPUS4-46379 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas T1 - Prüfverfahren zur Bewertung der kathodischen Enthaftung bei organischen beschichtungen – Eine kritische Betrachtung N2 - Im Vortrag werden mit Blick auf die geltenden Regelwerke und Normen die Unterschiede verschiedener Prüfmethoden zur kathodischen Enthaftung bei organischen Beschichtungen vorgestellt und deren Aussagekraft kritisch betrachtet. Am Beispiel von systematischen Versuchsreihen an einem Kurzzeittest werden die Grenzen einiger Methoden herausgearbeitet und die Anwendbarkeit für Reparaturbeschichtungen in Offshore-Bereich ausgelotet. T2 - Arbeitskreissitzung „Korrosionsschutz durch Beschichtungen“ des GfKORR e. V. CY - Dresden, Germany DA - 23.10.2018 KW - Kathodische Enthaftung KW - Cathodic delamination KW - Korrosionsprüfung KW - Corrosion testing KW - Organische Beschichtungen KW - Organic coatings PY - 2018 AN - OPUS4-46380 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Berger, Achim T1 - Tragbare RFA an Gläsern: Ergebnisse und Grenzen N2 - Vorstellung der Ergebnisse der Messungen an Gläsern von Goethes Prismen. T2 - 3. Goethe/Ritter-Workshop CY - Berlin, Germany DA - 25.05.2018 KW - Goethe KW - Farbenlehre KW - Prisma KW - Handheld KW - XRF PY - 2018 AN - OPUS4-46369 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - de Oliveira Guilherme Buzanich, Ana A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Scharf, o T1 - The colour X-ray camera – Basics and applications of a 2D X-ray detector N2 - The Color X-ray Camera CXC or SLcam® is an energy-resolving X-ray camera capable of energy- and space-resolved measurements. It consists of a high-speed CCD detector coupled to a polycapil-lary optic that conducts the X-ray photons from the probe to distinct pixels onto the detector. The camera is capable of fast acquisition of spatially and energy resolved fluorescence images. A dedicated software enables the acquisition and the online processing of the spectral data for all 69696 pixels, leading to a real-time visualization of the elements distribution in a sample. It was developed in a joint project with BAM, IFG Berlin and PN Sensors. In this contribution we will mainly discuss the use of the CXC at our beamline, the BAMline at BESSY II and imaging applications of the CXC from different areas, like biology and archaeometry. Additionally new developments for the use of the detector without optics, like wavelength dispersive detection or 1shot-XANES, will be presented. T2 - Seminar Strahlenphysikalische Anwendungen in Technik und Medizin CY - ATi Wien, Austria DA - 24.01.2018 KW - XRF KW - Synchrotron KW - BAMline PY - 2018 AN - OPUS4-46365 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Erenberg, Marina A1 - Bletzer, Claus Wilhelm A1 - Musolff, André A1 - Nehrig, Marko A1 - Wille, Frank T1 - Investigations of the burning behavior of transport package impact limiters and thermal effects onto the cask N2 - Accident safe packages for the transport of spent nuclear fuel and high-level waste shall fulfil international IAEA safety requirements. Compliance is shown by consecutive mechanical and thermal testing. Additional numerical analysis are usually part of the safety evaluation. For damage protection some package designs are equipped with wood filled impact limiters encapsulated by steel sheets. The safety of these packages is established in compliance with IAEA regulations. Cumulative mechanical and fire tests are conducted to achieve safety standards and to prevent loss of containment. Mechanical reliability is proven by drop tests. Drop testing might cause significant damage of the impact limiter steel sheets and might enable sufficient oxygen supply to the impact limiter during the fire test to ignite the wood filling. The boundary conditions of the fire test are precisely described in the IAEA regulatory. During the test the impact limiter will be subjected to a 30 minute enduring fire phase. Subsequent to the fire phase any burning of the specimen has to extinguish naturally and no artificial cooling is allowed. At BAM a large-scale fire test with a real size impact limiter and a wood volume of about 3m³ was conducted to investigate the burning behaviour of wood filled impact limiters in steel sheet encapsulation. The impact limiter was equipped with extensive temperature monitoring equipment. Until today burning of such impact limiters is not sufficiently considered in transport package design and more investigation is necessary to explore the consequences of the impacting fire. The objective of the large scale test was to find out whether a self-sustaining smouldering or even a flaming fire inside the impact limiter was initiated and what impact on the cask is resulting. The amount of energy, transferred from the impact limiter into the cask is of particular importance for the safety of heavy weight packages. With the intention of heat flux quantification a new approach was made and a test bench was designed. A first computational simulation of transport package temperatures taking into account the results of the conducted fire test was performed. T2 - IRSN Conference on Safe Transport of Radioactive Material CY - Fontenay aux Roses, France DA - 13.11.2018 KW - Impact limiter KW - Shock absorber KW - Smoldering KW - Smouldering KW - Burning KW - Thermal testing KW - BAM TTS KW - Combustion KW - Fire KW - Energy release KW - Thermal simulation KW - Heat emission KW - Radioactive KW - Transport KW - IAEA KW - Wood KW - Spruce wood KW - Lid temperature PY - 2018 AN - OPUS4-46882 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Erenberg, Marina A1 - Bletzer, Claus A1 - Feldkamp, Martin A1 - Musolff, André A1 - Nehrig, Marko A1 - Wille, Frank T1 - Experimental investigations of the burning behaviour of transport package impact limiters and of fire spread impact onto the cask T2 - Proceedings of the ASME 2018 Pressure Vessels an Piping Conference N2 - Accident safe packages for the transport of spent nuclear fuel and high-level waste shall fulfil international IAEA safety requirements. Compliance is shown by consecutive mechanical and thermal testing. Additional numerical analysis are usually part of the safety evaluation. For damage protection some package designs are equipped with wood filled impact limiters encapsulated by steel sheets. The safety of these packages is established in compliance with IAEA regulations. Cumulative mechanical and fire tests are conducted to achieve safety standards and to prevent loss of containment. Mechanical reliability is proven by drop tests. Drop testing might cause significant damage of the impact limiter steel sheets and might enable sufficient oxygen supply to the impact limiter during the fire test to ignite the wood filling. The boundary conditions of the fire test are precisely described in the IAEA regulatory. During the test the impact limiter will be subjected to a 30 minute enduring fire phase. Subsequent to the fire phase any burning of the specimen has to extinguish naturally and no artificial cooling is allowed. At BAM a large-scale fire test with a real size impact limiter and a wood volume of about 3m3 was conducted to investigate the burning behaviour of wood filled impact limiters in steel sheet encapsulation. The impact limiter was equipped with extensive temperature monitoring equipment. Until today burning of such impact limiters is not sufficiently considered in transport package design and more investigation is necessary to explore the consequences of the impacting fire. The objective of the large scale test was to find out whether a self-sustaining smouldering or even a flaming fire inside the impact limiter was initiated and what impact on the cask is resulting. The amount of energy, transferred from the impact limiter into the cask is of particular importance for the safety of heavy weight packages. With the intention of heat flux quantification a new approach was made and a test bench was designed. T2 - ASME 2018 Pressure Vessels and Piping Conference CY - Prague, Czech Republic DA - 15.07.2018 KW - Shock absorber KW - Impact limiter KW - Wood KW - Thermal testing KW - Fire KW - Smoldering KW - IAEA KW - Fire test PY - 2018 SN - 978-0-7918-5170-8 VL - PVP2018 SP - 84714-1 EP - 84714-10 AN - OPUS4-46984 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yin, Huajie A1 - Chapala, P. A1 - Bermeshev, M. A1 - Schönhals, Andreas A1 - Böhning, Martin T1 - Molecular Mobility and Physical Aging of a Highly Permeable Glassy Polynorbornene as Revealed by Dielectric Spectroscopy JF - ACS Macro Letters N2 - Polymeric membranes represent a cost- and energy efficient solution for gas separation. Recently superglassy polymers with high free volume outperform many conventional dense polymers in terms of gas permeability and selectivity. However, such polymers are prone to pronounced physical aging, resulting in a dramatic reduction in the gas permeability. Molecular mobility of polymer segments plays an important role in the physical aging and the gas transport performance of polymeric membranes. Molecular mobility and physical aging of a representative superglassy polynorbornene with very high gas permeability, PTCNSi2g, was monitored by using dielectric spectroscopy with state-of-the-art high-resolution analyzers. This work helps to shed some light on the structure−property relationship of superglassy polymers on a molecular level and to provide practical “design rules” for the development of high performance polymers for gas separation. KW - Molecular mobility KW - Gas separation membrane KW - Broadband dielectric spectroscopy KW - Polymer KW - Physical ageing PY - 2017 DO - https://doi.org/10.1021/acsmacrolett.7b00456 SN - 2161-1653 VL - 6 IS - 8 SP - 813 EP - 818 PB - ACS CY - Washington DC, USA AN - OPUS4-41354 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Untersuchung und Begutachtung verschiedener Rohstoffe und Materialien JF - Jahresbericht VII der Chemisch-Technischen Reichsantalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 128 EP - 128 PB - Verl. Chemie CY - Berlin AN - OPUS4-42069 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Untersuchung von Rostschutzfarben für Acetylenentwickler JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 129 EP - 129 PB - Verl. Chemie CY - Berlin AN - OPUS4-42072 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Prüfung poröser Massen für Acetylenflaschen zur Feststellung der Sicherheit bei der Herstellung, beim Transport und im Verkehr, Grundsätze für die amtliche Prüfung poröser Massen, Bestimmung der Porosität, Prüfung der Transportsicherheit, Zündungsversuche zur Ermittlung der Explosionssicherheit von Massen und Übersicht über die im Verkehr befindlichen Massen JF - Jahresbericht VI der Chemisch-Technischen Reichsanstalt - 1927 PY - 1929 SN - 0368-1785 VL - VI SP - 1 EP - 21 PB - Verl. Chemie CY - Berlin AN - OPUS4-42073 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Prüfung von Sicherheitsfilmschränken JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 102 EP - 103 PB - Verl. Chemie CY - Berlin AN - OPUS4-42024 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Prüfung von Sicherheitsfilmschränken - Verhalten eines Filmschranks bei Innenzündung JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 103 EP - 105 PB - Verl. Chemie CY - Berlin AN - OPUS4-42025 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Prüfung von Sicherheitsfilmschränken - Erprobung eines 8teiligen Schranks bei Innenfeuer in einem Fach JF - Jahresbericht VII der Chemisch-Technischen Reichsantalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 105 EP - 105 PB - Verl. Chemie CY - Berlin AN - OPUS4-42026 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Prüfung von Sicherheitsfilmschränken - Verhalten der Filmschränke im Außenfeuer JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 106 EP - 109 PB - Verl. Chemie CY - Berlin AN - OPUS4-42029 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Transport brennbarer Flüssigkeiten JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 109 EP - 112 PB - Verl. Chemie CY - Berlin AN - OPUS4-42037 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Verhütung der Explosion von Tinol-Lötlampen JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 112 EP - 112 PB - Verl. Chemie CY - Berlin AN - OPUS4-42038 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Über explosionssichere Schmiermittel JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 112 EP - 114 PB - Verl. Chemie CY - Berlin AN - OPUS4-42039 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Über explosionssichere Schmiermittel - Prüfung der Entzündlichkeit verschiedener Schmiermittel im Mackeyschen Apparat JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 114 EP - 114 PB - Verl. Chemie CY - Berlin AN - OPUS4-42040 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Über explosionssichere Schmiermittel - Prüfung des Verhaltens verschiedener Schmiermittel beim Zusammentreffen mit strömendem Sauerstoff unter Druck JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 114 EP - 125 PB - Verl. Chemie CY - Berlin AN - OPUS4-42041 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Arbeiten betreffend die Gefährdung der öffentlichen Sicherheit durch verschiedene Stoffe und Fabrikate - Über explosionssichere Schmiermittel - Schlußfolgerungen aus den Versuchen JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 125 EP - 126 PB - Verl. Chemie CY - Berlin AN - OPUS4-42042 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Verhütung von Ausschwitzungen beim Magnesiakitt JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 126 EP - 126 PB - Verl. Chemie CY - Berlin AN - OPUS4-42043 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Verrottung von Linoleum durch Feuchtigkeit im Mauerwerk JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 126 EP - 126 PB - Verl. Chemie CY - Berlin AN - OPUS4-42044 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über die Angreifbarkeit von Leder und Lederschutzmitteln JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 127 EP - 127 PB - Verl. Chemie CY - Berlin AN - OPUS4-42045 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über die Angreifbarkeit von Leder und Lederschutzmitteln - Versuche zur Bestimmung freier Schwefelsäure im Leder JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 127 EP - 127 PB - Verl. Chemie CY - Berlin AN - OPUS4-42047 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über die Angreifbarkeit von Leder und Lederschutzmitteln - Versuche zur Feststellung der Einwirkung von Säuren auf Leder JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 127 EP - 127 PB - Verl. Chemie CY - Berlin AN - OPUS4-42053 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Arbeiten über die Angreifbarkeit von Leder und Lederschutzmitteln - Prüfung von Lederkonservierungsmitteln JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 127 EP - 127 PB - Verl. Chemie CY - Berlin AN - OPUS4-42059 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Allgemeine chemisch-technische Arbeiten - Andere chemisch-technische Arbeiten - Teilnahme an der Aufstellung von Lieferungsbedingungen usw. JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 128 EP - 128 PB - Verl. Chemie CY - Berlin AN - OPUS4-42063 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin A1 - Krietsch, Arne T1 - Selbstentzündung von Feststoffen: EN 15188, metallurgische Kohlen, Holzpellets N2 - Berichtet wird über geplante Änderungen der europäischen Norm EN 15188 "Bestimmung des Selbstentzündungsverhaltens von Schüttgütern und Stäuben"; basierend auf den von der BAM durchgeführten Ringversuchen zur Methodenvalidierung. Zusätzlich wird berichtet von Besonderheiten bei der Gefahrguteinstufung metallurgischer Kohlen als selbsterhitzungsfähiger Feststoff sowie der Selbstentzündung von Holzpellets. T2 - Treffen des Industriearbeitskreises "Brennbare Stäube",Insitut für Arbeitsschutz und Arbeitssicherheit CY - St. Augustin, Germany DA - 20.06.2017 KW - Selbstentzündung KW - Gefahrstoff KW - Einstufung KW - Feststoff PY - 2017 AN - OPUS4-41048 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dümmel, Martin A1 - Lohrer, Christian A1 - Mücke, Olaf T1 - Tumbling effects of cylindrical shells N2 - In the future new types of lift charges for display Shells will enter the market. These types may not be based on black powder and therefore will show different Performance behaviors. The European standard series EN 16261 deals with the testing and assessment of display fireworks in order to satisfy the essential safety requirements which have to be met before placing these items on the EU market. The aim of the study is to investigate how certain types of lift charges (NC based) influence the lift, tumbling and drift of cylindrical shells. In consequence, if the performance characteristics deviate strongly from those of typical black powder, safety related regulations in the EU and Germany might be affected, as well. T2 - 16th International Symposium on Fireworks CY - Omagari, Japan DA - 24.04.2017 KW - Fireworks KW - Shells KW - Tumbling PY - 2017 AN - OPUS4-40610 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wittig, Günther A1 - Thomas, Hans-Martin A1 - Maser, Dieter A1 - Wenke, Hilmar T1 - Untersuchungen zum Nachweis von Korrosionsschäden an austenitischen Komponenten mit dem Impuls-Wirbelstromverfahren JF - Materialprüfung PY - 1983 SN - 0025-5300 VL - 25 IS - 12 SP - 433 EP - 437 PB - Hanser CY - München AN - OPUS4-40617 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Die Temperaturen des explosiblen Zerfalls von Acetylen in Abhängigkeit vom Druck und von der Strömungsgeschwindigkeit - Zusammenfassung JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 71 EP - 71 PB - Verl. Chemie CY - Berlin AN - OPUS4-41819 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Gasuntersuchungen am Zeppelin-Luftschiff L.Z. 127 - Allgemeines JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 71 EP - 74 PB - Verl. Chemie CY - Berlin AN - OPUS4-41820 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Gasuntersuchungen am Zeppelin-Luftschiff L.Z. 127 - Versuche am ruhenden Schiff JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1928 SN - 0368-1785 VL - VII SP - 74 EP - 76 PB - Verl. Chemie CY - Berlin AN - OPUS4-41821 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Gasuntersuchungen am Zeppelin-Luftschiff L.Z. 127 - Versuche im fahrenden Schiff JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 77 EP - 81 PB - Verl. Chemie CY - Berlin AN - OPUS4-41822 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Gasuntersuchungen am Zeppelin-Luftschiff L.Z. 127 - Zusammenfassung JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 81 EP - 83 PB - Verl. Chemie CY - Berlin AN - OPUS4-41823 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schilling, Markus A1 - Böhning, Martin A1 - Oehler, H. A1 - Alig, I. A1 - Niebergall, Ute T1 - Environmental stress cracking of polyethylene high density (PE-HD) induced by liquid media – Validation and verification of the full-notch creep test (FNCT) T1 - Umgebungsinduzierte Spannungsrissbildung von Polyethylen- Werkstoffen hoher Dichte durch flüssige Medien – Validierung und Verifizierung des Kriechversuchs an Probekörpern mit umlaufender Kerbe JF - Materials Science & Engineering Technology N2 - The full-notch creep test (FNCT) is widely used to characterize the slow crack growth (SCG) behavior of polyolefin materials in “inert” media as well as effects of environmental stress cracking (ESC) in which the medium has decisive influence on damage mechanism and time to failure. The test is of greatest importance for pipe and blow molding types of polyethylene, high density (PE-HD). Usually the full-notch creep test is applied as a standardized testing method (ISO 16770) using a few universal liquid media, such as solutions of Arkopal N 100. In our study, selected relevant polyethylene, high density materials are investigated also in real media – practical formulations as well as representative pure chemicals – and influences of temperature and geometry of specimen and notch are explicitly addressed. Furthermore, the investigations comprise also the environmental stress cracking behavior of polyethylene, high density in media that are sorbed to a significant extent – examples are diesel and biodiesel – based on comparison with samples previously saturated with those media. Thus, also the underlying diffusion controlled sorption process has to be assessed before. The investigations were performed using a full-notch creep testing device with 12 individual sub-stations, each equipped with individual electronic stress and temperature control and continuous online monitoring of the specimen elongation. N2 - Der Kriechversuch an Probekörpern mit umlaufender Kerbe (FNCT) wird flächendeckend angewendet, um das Verhalten von Polyolefinen sowohl gegenüber langsamen Risswachstums (SCG) bei Kontakt mit „inerten“ Medien als auch gegenüber umgebungsbedingtem Spannungsrisswachstum (ESC), bei welchem das umgebende Medium entscheidenden Einfluss auf den Schädigungsmechanismus und die Standzeit hat, zu charakterisieren. Der Test ist von großer Bedeutung bei der Analyse von hochdichten Polyethylen-Typen, die als Rohr- und Blasformwerkstoffe angewendet werden – dabei besonders für Transport und Verpackung von Gefahrstoffen, aber auch für weitere Hochleistungsanwendungen. Üblicherweise wird der Kriechversuch an Probekörpern mit umlaufender Kerbe als Normmethode (ISO 16770) unter Verwendung einiger weniger universeller Modellflüssigkeiten, wie z. B. Arkopal N 100, durchgeführt. In dieser Studie werden ausgewählte, marktrelevante Polyethylen-Werkstoffe hoher Dichte in realen Medien – praktisch verwendete Gefahrgüter sowie repräsentative reine Chemikalien – untersucht und explizit die Einflüsse von Temperatur und Prüfkörper- sowie Kerbgeometrie adressiert. Weiterhin beinhalten die Untersuchungen die Analyse des umgebungsbedingten Spannungsriss-Verhaltens von Polyethylen hoher Dichte in Medien, die maßgeblich vom Werkstoff sorbiert sind – beispielsweise mit Kraftstoffen wie diesel und biodiesel – basierend auf dem Vergleich mit vorgesättigten Probekörpern. Der dabei vorliegende diffusionsgesteuerte Sorptionsprozess muss dementsprechend zuvor evaluiert werden. Alle Untersuchungen wurden mithilfe einer Kriechversuchsanlage an Probekörpern mit umlaufender Kerbe mit 12 Stationen durchgeführt, welche jeweils mit einer individuell ansteuerbaren elektronischen Spannungs- und Temperatursteuerung sowie fortwährender Online-Überwachung der Prüfkörperdehnung ausgestattet sind. KW - Full-notch creep test (FNCT) KW - Polyethylene (PE-HD) KW - Environmental stress cracking (ESC) KW - Slow crack growth (SCG) KW - Biodiesel PY - 2017 DO - https://doi.org/10.1002/mawe.201700065 SN - 1521-4052 SN - 0933-5137 VL - 48 IS - 9 SP - 846 EP - 854 PB - Wiley-VCH CY - Weinheim AN - OPUS4-41885 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Heyn, A. A1 - Rosemann, Paul A1 - Babutzka, Martin A1 - Bender, S. T1 - Elektrochemisches Rauschen von unlegiertem Stahl in wasserbasierten Bindemittel-Pigment-Gemischen T2 - Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik N2 - Die Entwicklung von Beschichtungen für den Korrosionsschutz ist ein aufwändiger Prozess mit einer Vielzahl von oftmals langwierigen Untersuchungen und Prüfungen der Schutzeigenschaften. Elektrochemische Methoden unterstützen die Entwicklungsprozesse in hohem Maße und helfen beim Verstehen von Wirk- und Schadensmechanismen. Sie werden meistens an fertig formulierten und applizierten Beschichtungssystemen vorgenommen. Es wird eine Untersuchungsmöglichkeit vorgestellt, bei der sich wasserbasierte Beschichtungsstoffe in unterschiedlichen Formulierungsvarianten bereits im flüssigen Zustand mit Hilfe des elektrochemischen Rauschens charakterisieren lassen. Damit ist es möglich, bereits in einer sehr frühen Phase der Formulierungsentwicklung die Auswahl von Bindemitteln, Pigmenten und weiteren Zusatzstoffen entscheidend zu unterstützen und effizienter zu gestalten. Am Beispiel der Entwicklung von zinkfreien Korrosionsschutzpigmenten für wasserbasierte Beschichtungen wird gezeigt, dass ein einzigartiger Einblick in die dynamischen Prozesse bei Kontakt eines Metalls mit der wässrigen Beschichtungsdispersion möglich ist und wie dies mit der Performance der Beschichtungen korreliert. T2 - 16. Sommerkurs Werkstoffe und Fügen CY - Magdeburg, Germany DA - 08.09.2017 KW - Beschichtung KW - Korrosion KW - Elektrochemisches Rauschen KW - Korrosionsschutzpigmente KW - Korrosionsschutz PY - 2017 SN - 978-3-944722-58-0 DO - https://doi.org/10.24352/UB.OVGU-2017-75 SP - 139 EP - 148 AN - OPUS4-41893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Reinemann, Steffi A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Influence of corundum grinding processes on the corrosion behaviour of austenitic stainless steels N2 - The scientific poster shows by means of corrosion testing in combination with surface analytical methods to which degree corundum grinding influences the corrosion behaviour of stainless steel surfaces. The austenitic stainless steel AISI 304 from a consistent heat was used for all investigations to guarantee the same chemical composition and thus no additional influences caused by the material itself. A wide range of different grinding parameters such as pressure, cooling medium and grain size of the abrasive was varied. Thus, comparison of the corrosion behaviour of different surface states and the evaluation of an optimum grinding process using corundum abrasives were possible. The results will contribute to present discussions and give novel impulses for companies in the metalworking industry. T2 - Eurocorr 2017 CY - Prague, Czech Republic DA - 03.09.2017 KW - Korrosion KW - Corrosion KW - Korundschleifen KW - Corundum grinding KW - Nichtrostende Stähle KW - Stainless steels PY - 2017 AN - OPUS4-41896 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten zur Beschreibung der Korrosionsschutzwirkung von Zinküberzügen N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität der gebildeten Deckschichten erlauben. Der Vortrag stellt das Promotionsthema vor und erläutert die Untersuchungsschwerpunkte. T2 - 16. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik - Doktorandenkolloquium CY - Magdeburg, Germany DA - 08.09.2017 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosionsprüfung KW - Zinkdeckschichten KW - Corrosion testing KW - Gel-type electrolytes KW - Layer formation KW - Zinc coatings PY - 2017 AN - OPUS4-41897 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Burkert, Andreas A1 - Heyn, A. T1 - Korrosionsuntersuchungen mit gelartigen Elektrolyten zur Beschreibung der Korrosionsschutzwirkung von Zinküberzügen T2 - 16. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik N2 - Ein neuer Ansatz bei elektrochemischen Korrosionsuntersuchungen kann durch den Einsatz von gelartigen Elektrolyten als Alternative zu wässrigen Prüfelektrolyten beschritten werden. Gelartige Elektrolyte ermöglichen minimalinvasive Untersuchungen an natürlich gebildeten Zinkdeckschichten. Dadurch können korrosionsrelevante Kennwerte ermittelt werden, die Aussagen zur Deckschichtbildung und zur Stabilität der gebildeten Deckschichten erlauben. In diesem Beitrag wird anhand verschiedener Deckschichtzustände an Zink der Mehrwert von gelartigen Elektrolyten für die Korrosionsforschung verdeutlicht. T2 - 16. Sommerkurs Werkstoffe und Fügen am Institut für Werkstoff- und Fügetechnik CY - Magdeburg, Germany DA - 08.09.2017 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosionsprüfung KW - Zinkdeckschichten KW - Corrosion testing KW - Gel-type electrolytes KW - Layer formation KW - Zinc coatings PY - 2017 SN - 978-3-944722-58-0 DO - https://doi.org/10.24352/UB.OVGU-2017-75 SP - 119 EP - 127 AN - OPUS4-41898 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Messung der Explosionsdrucke von reinem, mit Wasserdampf und Acetondampf gesättigtem Acetylen JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 56 EP - 58 PB - Verl. Chemie CY - Berlin AN - OPUS4-41809 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Messung der Explosionsdrucke von reinem, mit Wasserdampf und Acetondampf gesättigtem Acetylen - Beschreibung der Apparatur JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 59 EP - 59 PB - Verl. Chemie CY - Berlin AN - OPUS4-41811 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Messung der Explosionsdrucke von reinem, mit Wasserdampf und Acetondampf gesättigtem Acetylen - Versuchsergebnisse JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 60 EP - 61 PB - Verl. Chemie CY - Berlin AN - OPUS4-41812 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Messung der Explosionsdrucke von reinem, mit Wasserdampf und Acetondampf gesättigtem Acetylen - Vergleich der gefundenen mit den errechneten Werten JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 61 EP - 62 PB - Verl. Chemie CY - Berlin AN - OPUS4-41813 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Messung der Explosionsdrucke von reinem, mit Wasserdampf und Acetondampf gesättigtem Acetylen - Zusammenfassung JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 63 EP - 63 PB - Verl. Chemie CY - Berlin AN - OPUS4-41814 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Die Temperaturen des explosiblen Zerfalls von Acetylen in Abhängigkeit vom Druck und von der Strömungsgeschwindigkeit JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 63 EP - 64 PB - Verl. Chemie CY - Berlin AN - OPUS4-41815 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Die Temperaturen des explosiblen Zerfalls von Acetylen in Abhängigkeit vom Druck und von der Strömungsgeschwindigkeit - Beschreibung der Apparatur JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 64 EP - 66 PB - Verl. Chemie CY - Berlin AN - OPUS4-41816 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Die Temperaturen des explosiblen Zerfalls von Acetylen in Abhängigkeit vom Druck und von der Strömmungsgeschwindigkeit - Versuchsergebnisse JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 66 EP - 70 PB - Verl. Chemie CY - Berlin AN - OPUS4-41817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rimarski, Walther A1 - Pleus, Bernhard A1 - Friedrich, A1 - Streb, Edmund A1 - Noack, A1 - Kemper, Hugo A1 - Hoffmann, A1 - Konschak, Martin T1 - Gastechnische Arbeiten - Verhütung von Unfällen bei der Verwendung von Acetylen - Die Temperaturen des explosiblen Zerfalls von Acetylen in Abhängigkeit vom Druck und von der Strömungsgeschwindigkeit - Verhalten des Acetylens bei adiabatischer Kompression JF - Jahresbericht VII der Chemisch-Technischen Reichsanstalt - 1928 PY - 1929 SN - 0368-1785 VL - VII SP - 70 EP - 71 PB - Verl. Chemie CY - Berlin AN - OPUS4-41818 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Eisenacher, Germar A1 - Schönfelder, Thorsten A1 - Wille, Frank T1 - Development of a material model for the crush of spruce wood T2 - Proceedings of ASME PVP 2017 N2 - Typical transport packages used in Germany are equipped with wooden impact limiting devices. In this paper we give an overview of the latest status regarding the development of a finite element material model for the crush of spruce wood. Although the crush of wood – mainly in longitudinal direction – is a phenomenon governed by macroscopic fracture and failure of wood fibres we smear fracture and failure mechanisms over the continuous voume. In first step we altered an existing LS-DYNA material model for foams, which considers an ellipse shaped yield surface written in terms of the first two stress invariants. The evolution of the yield surface in the existing model depends on the volumetric strain only. For the use with spruce wood, we modified the existing material model to consider the deviatoric strain for the evolution of the yield surface as well. This is in accordance with the results of crush tests with spruce wood specimens, where the crushing deformation was rather deviatoric for uniaxial stress states and rather volumetric for multiaxial stress states We rate the basic idea of this approach to be reasonable, though other problems exist regarding the shape of the yield surface and the assumption of isotropic material properties. Therefore we developed a new transversal isotropic material model with two main directions, which considers different yield curves according to the multiaxiality of the stress state via a multi-surface yield criterion and a non-associated flow rule. The results show the ability to reproduce the basic strength characteristics of spruce wood. Nevertheless, problems with regularization etc. show that additional investigations are necessary. T2 - ASME PVP 2017 CY - Waikaloa, HY, USA DA - 16.07.2017 KW - Chrush KW - Spruce KW - Wood KW - FEM PY - 2017 SN - 978-0-7918-5802-8 VL - 7 SP - Article UNSP V007T07A037, 1 EP - 9 AN - OPUS4-41613 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Eisenacher, Germar A1 - Schönfelder, Thorsten A1 - Wille, Frank T1 - Development of a material model for the crush of spruce wood N2 - Typical transport packages used in Germany are equipped with wooden impact limiting devices. In this paper we give an overview of the latest status regarding the development of a finite element material model for the crush of spruce wood. Although the crush of wood – mainly in longitudinal direction – is a phenomenon governed by macroscopic fracture and failure of wood fibres we smear fracture and failure mechanisms over the continuous voume. In first step we altered an existing LS-DYNA material model for foams, which considers an ellipse shaped yield surface written in terms of the first two stress invariants. The evolution of the yield surface in the existing model depends on the volumetric strain only. For the use with spruce wood, we modified the existing material model to consider the deviatoric strain for the evolution of the yield surface as well. This is in accordance with the results of crush tests with spruce wood specimens, where the crushing deformation was rather deviatoric for uniaxial stress states and rather volumetric for multiaxial stress states We rate the basic idea of this approach to be reasonable, though other problems exist regarding the shape of the yield surface and the assumption of isotropic material properties. Therefore we developed a new transversal isotropic material model with two main directions, which considers different yield curves according to the multiaxiality of the stress state via a multi-surface yield criterion and a non-associated flow rule. The results show the ability to reproduce the basic strength characteristics of spruce wood. Nevertheless, problems with regularization etc. show that additional investigations are necessary. T2 - ASME PVP 2017 CY - Waikaloa, HY, USA DA - 16.07.2017 KW - Crush KW - Wood KW - Spruce KW - FEM PY - 2017 AN - OPUS4-41617 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babutzka, Martin A1 - Heyn, A. A1 - Rosemann, Paul T1 - Influence of austenitizing and tempering on the corrosion behavior and sensitization of martensitic stainless steel X50CrMoV15 JF - Materials and Corrosion N2 - Electrochemical tests, hardness measurements, and microstructure analysis are performed to study the influence of austenitizing, quenching, and tempering parameters on the corrosion resistance of the martensitic stainless steel grade X50CrMoV15 (1.4116). Different heat treatment states were studied using an adapted EPR-Test to evaluate the chromium distribution and depletion caused by the formation and dissolution of chromium rich carbides. The EPR results were correlated with pitting corrosion behavior, demonstrating the strong effect of heat treatment parameters on the susceptibility of martensitic stainless steels to corrosion phenomena. KW - Martensitic stainless steel KW - Electrochemical potentiokinetic reactivation KW - Heat treatment KW - Pitting corrosion PY - 2018 DO - https://doi.org/10.1002/maco.201810170 SN - 0947-5117 SN - 1521-4176 VL - 69 IS - 10 SP - 1338 EP - 1349 PB - Wiley-VCH Verlag CY - Weinheim AN - OPUS4-46138 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Heise, Svenja A1 - Burkert, Andreas T1 - Normentwurf für ein Prüfverfahren zur Bestimmung von Deckschichtwiderständen an Zinküberzügen mittels gelartiger Elektrolyte N2 - Der Vortrag stellt das WIPANO-Vorhaben GELELEK vor. Zu Beginn werden die Messtechnik und die Projektidee kurz erläutert. Anschließend wird ein Überblick über die Projektpartner, Projektziele und Arbeitsschritte gegeben. T2 - 66. Sitzung des NA 062-01-76 AA "Chemische und elektrochemische Überzüge" CY - Berlin, Germany DA - 19.03.2019 KW - Deckschichtbildung KW - Gelartige Elektrolyte KW - Korrosion KW - Zinküberzüge PY - 2019 AN - OPUS4-47575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hahn, Michael A1 - Buzanich, Günter A1 - Jähn, Katharina A1 - Reinholz, Uwe A1 - Radtke, Martin T1 - Analysis of cobalt deposition in periprosthetic bone specimens by high-resolution synchroton XRF in undecalcified histological thin sections JF - Materialia N2 - Increasing numbers of implant revisions are a current clinical issue. Interactions of the endoprosthesis biomaterial with the body affect implantation time by wear processes, i.e. corrosion and abrasion. Previously, cobalt-chrome implants were shown to cause high levels of cobalt ions being deposited in the bone matrix. To determine a poten- tial functional role of these ions on bone homeostasis, we have developed a non-destructive dual analysis of highly sensitive elemental analysis by synchrotron XRF directly in undecalcified histological bone thin sections (4 μm). In this study, samples from 28 bone samples from hip endoprosthesis carriers (Surface Replacement Arthroplasty, metal-on-metal bearing) with an implant lifetime of 17–1750 days were used. Results were compared to age- matched control specimens. The histological analysis identified areas of bone cell activity and assigned them for XRF measurements. Co-Cr wear particles were identified in the bone marrow. In addition, Co ions were highly enriched in the mineralized bone matrix. The cobalt deposits were not homogeneously distributed, and areas of high signal intensity were identified. Co was distinctly deposited in the newly formed osteoid layer, but also within deeper layers of the bone matrix, whereby the Co concentration increased with higher degrees of bone matrix mineralization. In the current study, we determined cobalt accumulations in the bone matrix and showed for the first time via synchrotron XRF with a high spatial resolution direct on histological slides, that cobalt deposits in the mineralized bone matrix in a mineral-specific way that is dependent upon the implant lifetime. KW - Implant material KW - Cobalt deposition KW - Bone matrix KW - High-resolution synchrotron XRF KW - Histology PY - 2019 DO - https://doi.org/10.1016/j.mtla.2019.100290 SN - 2589-1529 VL - 6 SP - 100290, 1 EP - 8 PB - Elsevier Inc. CY - Amsterdam, Niederlande AN - OPUS4-47620 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Auslagerungsversuche von Standardproben unter verschiedenen atmosphärischen Bedingungen N2 - Der Vortrag berichtet über die Auslagerung von Standardproben nach DIN EN ISO 9223 bis 9226 aus Zink, Stahl, Kupfer und Aluminium auf den verschiedenen atmosphärischen Bewitterungsständen der Bundesanstalt für Materialforschung und -prüfung (BAM). Im Vortrag werden die Masseverluste, Korrosionsgeschwindigkeiten und Korrosivitätskategorien der Standardproben im freibewitterten und überdachten Bereich nach einem Jahr vorgestellt und Unterschiede hinsichtlich der Atmosphärenbedingungen aufgezeigt. Freibewitterte Proben zeigen dabei deutliche Unterschiede hinsichtlich ihres Korrosionsverhaltens im Vergleich zu überdachten Proben. Die ermittelten Korrosivitätskategorien sind sowohl standort- als auch materialspezifisch. T2 - 44. Arbeitskreissitzung „Schadensuntersuchung“ des GfKORR e. V. CY - Frankfurt a. M., Germany DA - 02.04.2019 KW - Korrosion KW - Atmosphärische Korrosion KW - Freibewitterung KW - Auslagerungsversuche PY - 2019 AN - OPUS4-47719 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Babutzka, Martin A1 - Mietz, Jürgen A1 - Burkert, Andreas T1 - Investigation of the salinization of steel surfaces in marine environment JF - Materials and Corrosion N2 - The salinization and contamination of metal surfaces by chloride-containing aerosols is of great importance with regard to corrosion phenomena of damaged coated metal surfaces and stainless steels in the maritime sector and in offshore applications. Detailed questions have to be answered to clarify whether and to what extent salinization of the surface has an influence on the adhesion and durability of coatings in repairing applications and on pitting occurrence on stainless steels under atmospheric conditions. The questions arise which degree of salinization is reached after which period of time and how a defined and reproducible salinization can be simulated in the laboratory for further systematic investigations. The article is dedicated to these questions. Results of a field trial on the Island of Heligoland are presented and a simple procedure for a defined loading of metal surfaces with chlorides at a laboratory scale using a design of experiments (DoE) approach is introduced. KW - Maritime Atmosphäre KW - Versalzung KW - Maritime atmosphere KW - Salinization PY - 2018 DO - https://doi.org/10.1002/maco.201810636 SN - 0947-5117 SN - 1521-4176 VL - 70 IS - 6 SP - 1016 EP - 1025 PB - Wiley-VCH Verlag CY - Weinheim AN - OPUS4-47727 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Langklotz, U. A1 - Babutzka, Martin A1 - Schneider, M. A1 - Burkert, Andreas T1 - The combination of minimally invasive electrochemical investigations and FTIR‐spectroscopy to analyze atmospheric corrosion product layers on zinc JF - Materials and Corrosion N2 - The present work describes the combination of electrochemical investigations by using a gel‐type electrolyte with Fourier‐transformed infrared spectroscopy to investigate partially extremely thin corrosion product films on titanium‐zinc. The gel pad method enables the determination of corrosion relevant parameters such as the potential and the linear polarization resistance without altering the corrosion product layers, which are extremely prone to re‐dissolution when freshly formed. Complementary infrared spectroscopy enables the determination of main compounds of even very thin surface layers of few tenth of nanometers with a certain lateral resolution. It was found that zinc forms mostly zinc carboxy‐hydroxides such as hydrozincite, under various exposure conditions. The protective properties of these hydrozincite layers depend on the structure of the corrosion product film rather than on its thickness. In mid‐term exposure tests, shallow corrosion pits were found even in the absence of corrosive agents such as chloride. KW - Gel-type electrolytes KW - Gelartige Elektolyte KW - Zinc coatings KW - Zinkdeckschichten KW - Korrosionsprüfung KW - Corrosion testing KW - FT-IR PY - 2019 DO - https://doi.org/10.1002/maco.201810696 SN - 0947-5117 SN - 1521-4176 VL - 70 IS - 7 SP - 1314 EP - 1325 PB - Wiley-VCH Verlag CY - Weinheim AN - OPUS4-47728 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Reinemann, Steffi A1 - Lehmann, Jens A1 - Rosemann, Paul A1 - Babutzka, Martin A1 - Bohlmann, Tatjana A1 - Burkert, Andreas T1 - Optimierung industrieller Korundschleifprozesse zur Sicherstellung der Korrosionsbeständigkeit nichtrostender Stähle N2 - Durch eine breite Beteiligung von Schleifmittelherstellern, -anwendern und wissenschaftlichen Einrichtungen im projektbegleitenden Ausschuss (PA) konnte der vielschichtige Themenkomplex „Schleifen“ im Kontext zu den Projektzielen umfassend untersucht werden. Es wurden praxisrelevante Parameterfelder definiert, die eine erfolgreiche Aufklärung der Projektfragestellung ermöglichten. Im Zuge der Untersuchungen wurde ein signifikanter Einfluss beim Einsatz von Granulatschleifbändern auf das Korrosionsverhalten geschliffener Oberflächen festgestellt. Damit zeigten geschliffene Oberflächen regelmäßig eine schlechtere Korrosionsbeständigkeit als Oberflächen, die mit sonst gleichen Parametern mit einlagig gestreuten Bändern bearbeitet wurden. Die durch einige Untersuchungsergebnisse aus vorangegangenen AiF-Vorhaben ursprünglich verfolgte These, dass Unterschiede in der Korrosionsbeständigkeit auf die Kornart der Schleifmittel Korund bzw. SiC zurückzuführen ist, konnte nur bedingt bestätigt werden. Bei den systematischen Untersuchungen innerhalb dieses Projektes erwies sich der Einfluss der Kornart im Vergleich zum Einfluss des Schleifbandtyps (Granulat bzw. einlagig gestreutes Korn) als weniger relevant. Durch weiterführende Untersuchungen konnten auf Oberflächen, die mit Granulatschleifbändern bearbeitet wurden, große Materialaufplattungen aus Eigenmaterial festgestellt werden. Das Eigenmaterial wird dabei im Schleifprozess zunächst abgetragen und aufgrund der Topografie des Schleifbandes zeitweise auf den Bändern festgehalten. Später lösen sich diese Materialanhäufungen vom Band ab und können prozessbedingt durch Wärme- und Krafteinwirkung auf den bearbeiteten Oberflächen aufgeplattet werden. Durch REM und KorroPad Untersuchungen ließen sich Bereiche mit solchen Eigenmaterialaufplattungen eindeutig als wesentliche Ausgangspunkte für Korrosionsprozesse identifizieren. Das aufgeplattete Material ist stark verformt, thermisch beeinflusst und bildet eine Spaltgeometrie zur Bauteiloberfläche aus. Diese Veränderungen führen zur Störung der Passivschichtausbildung in diesen Bereichen und verursachen damit eine erhöhte Korrosionsanfälligkeit der Oberflächen. Durch gezielte Nachbearbeitungsprozesse ist es möglich, die Eigenmaterialaufplattungen von den Oberflächen zu entfernen. Im Rahmen des Vorhabens wurde dazu eine Nachbearbeitung mittels Schleifvlies geprüft, die zu einer Entfernung der Eigenmaterialaufplattungen und damit zu einer Wiederherstellung der erwarteten Korrosionsbeständigkeit führte. Wird der Endschliff von Oberflächen mit einlagig gestreutem Korn ausgeführt, sind ebenfalls keine korrosionsrelevanten Materialaufplattungen zu erwarten. Die in einem vorhergehenden AiF Vorhaben IGF 17136 N/1 entwickelte Methode der KorroPad-Prüfung konnte auch hier erfolgreich für die Untersuchung der Auswirkung unterschiedlicher Prozessparameter auf die Korrosionsbeständigkeit der Oberflächen eingesetzt werden. Zudem erwies sich das EPR-SL-Verfahren als ein weiterer Ansatz, um die Passivschichtstabilität verschieden geschliffener Oberflächen vergleichend untersuchen zu können. Mit den nun vorliegenden Erkenntnissen können kmU künftig durch Anpassungen und Optimierung von Schleifprozessen eine gute Korrosionsbeständigkeit der bearbeiteten Oberflächen sicherstellen. Die Optimierung der Prozessparameter und -schritte kann durch den Einsatz der KorroPad-Prüfung Inhouse erfolgen und somit die laufende Fertigung im Rahmen der Qualitätsprüfung überwacht und dokumentiert werden. KW - KorroPad KW - Korrosion KW - Korrosionsbeständigkeit KW - Korrosionsschutz KW - Verfleckungen KW - Nichtrostender Stahl KW - Schleifen KW - Oberfläche PY - 2019 SP - 1 EP - 74 AN - OPUS4-47729 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Baeßler, Matthias A1 - Babutzka, Martin A1 - Trappe, Volker A1 - Pittner, Andreas A1 - Krankenhagen, Rainer A1 - Kühne, Hans-Carsten T1 - Vorstellung des Aktivitätsfelds Erneuerbare Energie N2 - Auf der Beiratssitzung des TF Energie wurde das Aktivitätsfeld Erneuerbare Energien in seinem breiten Spektrum (aber selektive Auswahl) vorgestellt. T2 - Beiratssitzung TF Energie CY - BAM Berlin-Adlershof, Germany DA - 09.04.2019 KW - Erneuerbare Energien KW - Windenergie PY - 2019 AN - OPUS4-47751 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Brand- und Explosionsgefahren beim Umgang mit Metallstäuben N2 - Grundlagen des Brand- und Explosionsschutzes mit Schwerpunkt Metallstäube: - Gefahren - Prinzipien des Explosionschutzes - Ableiten von Schutzmaßnahmen - Bestimmung der Stoffeigenschaften - Umgang mit entsprechenden Datenbanken T2 - DGM Fortbildungsseminar "Metallpulver Erzeugen - Charakterisieren - Anwenden" CY - Universität Bremen, Germany DA - 14.03.2019 KW - Brandschutz KW - Explosionsschutz KW - Sicherheitstechnische Kenngrößen PY - 2019 AN - OPUS4-47948 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Yin, Huajie A1 - Chapala, P. A1 - Bermeshev, M. A1 - Pauw, Brian Richard A1 - Schönhals, Andreas A1 - Böhning, Martin T1 - Influence of Trimethylsilyl Side Groups on the Molecular Mobility and Charge Transport in Highly Permeable Glassy Polynorbornenes JF - ACS Applied Polymer Materials N2 - Superglassy polymers with a large fractional free volume have emerged as novel materials with a broad range of applications, especially in the field of membrane separations. Highly permeable addition-type substituted polynorbornenes with high thermal resistance and chemical stability are among the most promising materials. The major obstacle for extending the practical membrane application is their strong tendency to physical aging, leading to a partial decline in their superior transport performance over time. In the present study, broadband dielectric spectroscopy with complementary X-ray scattering techniques were employed to reveal changes in microporous structure, molecular mobility, and conductivity by systematic comparison of two polynorbornenes with different numbers of trimethylsilyl side groups. Their response upon heating (aging) was compared in terms of structure, dynamics, and charge transport behavior. Furthermore, a detailed analysis of the observed Maxwell−Wagner−Sillars polarization at internal interfaces provides unique information about the microporous structure in the solid films. The knowledge obtained from the experiments will guide and unlock potential in synthesizing addition-type polynorbornenes with versatile properties. KW - Dielectric spectroscopy KW - Molecular mobility KW - Electrical conductivity KW - Gas separation membranes PY - 2019 DO - https://doi.org/10.1021/acsapm.9b00092 SN - 2637-6105 VL - 1 IS - 4 SP - 844 EP - 855 PB - ACS CY - Washington DC AN - OPUS4-47838 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Reinemann, Steffi A1 - Rosemann, P. A1 - Babutzka, Martin A1 - Lehmann, Jens A1 - Burkert, Andreas T1 - Influence of grinding parameters on the corrosion behavior of austenitic stainless steel JF - Materials and Corrosion N2 - Samples of the austenitic stainless steel grade X5CrNi18‐10 (1.4301, AISI 304) were ground industrially with various grinding parameters to study their influence on corrosion resistance. The ability of the mechanically ground surfaces to form a stable passive layer was evaluated by KorroPad test and a modified electrochemical potentiodynamic reactivation test based on a single loop (EPR‐SL). Furthermore, the surfaces were characterized by surface analytical methods. The main influence was determined regarding abrasive belt type. Surfaces mechanically ground with granulate abrasive belts constantly had a lower corrosion resistance than surfaces ground with single‐coated grain. The granulate abrasive belts generated more sensitized surface areas and left formations of welded sample material on the mechanically ground surfaces. A post‐treatment with a nonwoven abrasive proved to be an effective finishing process by which the surface defects and sensitized material got removed and the surfaces regained the expected corrosion resistance. KW - Abrasive belt KW - Austenitic stainless steel KW - Electrochemical potentiodynamic reactivation KW - Grinding KW - KorroPad KW - Surface KW - Corrosion PY - 2019 DO - https://doi.org/10.1002/maco.201910874 SN - 0947-5117 SN - 1521-4176 VL - 70 IS - 10 SP - 1776 EP - 1787 PB - Wiley-VCH Verlag CY - Weinheim AN - OPUS4-47871 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Martin A1 - Wu, D. A1 - Song, Z. A1 - Zhang, Q. A1 - Qian, X. T1 - Theoretical and numerical study on ignition behaviour of coal dust layers on a hot surface with corrected kinetic parameters JF - Journal of Hazardous Materials N2 - Industrial fires and explosions initiating from self-ignition of combustible porous dust deposits represent a serious hazard for human beings, environment and industry. Understanding the fundamental basis of combustible dust ignition behaviours at different geometries is of importance to prevent and mitigate the accidental risks. A correlation of self-ignition temperatures (SITs) measured by hot-oven tests and minimum ignition temperatures of dust layers (MITLs) determined by hot-plate tests has been established previously. However, this analogy approach based on Frank-Kamenetzkii model is limited by ignoring the influence of oxygen diffusion. In this work, an improved method is developed by implementing a correction factor for the pre-exponential factor caused by the boundary geometry. This method is testified by comparing with experimental data, previous analogy method and numerical simulation. Results show that our proposed method performs a better predictability of MITLs and simplicity. The improved analogy method indicates that the different boundary geometries of a dust deposit significantly impact the apparent pre-exponential factor, while have an ignorable influence on the activation energy, which is also verified by numerical investigations. Furthermore, the numerical model with the corrected kinetic parameters provides a satisfactory explanation compared with experimental observations regarding to temperature and concentration evolutions of dust layers. KW - Spontanious ignition KW - Self-ignition KW - Minimum ignition temperature KW - Dust layers PY - 2019 DO - https://doi.org/10.1016/j.jhazmat.2019.01.032 VL - 368 SP - 156 EP - 162 PB - Elsevier AN - OPUS4-47854 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Pimienta, Pierre A1 - McNamee, Robert A1 - Robert, Fabienne A1 - Boström, Lars A1 - Huang, Shan-Shan A1 - Mróz, Katarzyna A1 - Davie, Colin A1 - Mohaine, Siyimane A1 - Alonso, Maria Cruz A1 - Bodnarova, Lenka A1 - Bosnjak, Josipa A1 - Dal Pont, Stefano A1 - Dao, Vinh A1 - Dauti, Dorjan A1 - Dehn, Frank A1 - Felicetti, Roberto A1 - Hager, Izabela A1 - Hela, Rudolf A1 - Hozjan, Tomaz A1 - Juknat, Michael A1 - Jumppanen, Ulla-Maija A1 - Kirnbauer, Johannes A1 - Kolsek, Jerneja A1 - Korzen, Manfred A1 - Lakhani, Hitesh A1 - Lion, Maxime A1 - Lo Monte, Francesco A1 - Maluk, Cristian A1 - Meftah, Fekri A1 - Miah, Md Jihad A1 - Millard, Alain A1 - Mindeguia, Jean-Christophe A1 - Moreau, Bérénice A1 - Msaad, Yahia A1 - Ozawa, Mitsuo A1 - Pesavento, Francesco A1 - Pham, Duc Toan A1 - Pistol, Klaus A1 - Rickard, Ieuan A1 - Rodrigues, Joao Paulo Correia A1 - Roosefid, Mohsen A1 - Schneider, Martin A1 - Sharma, Umesh Kumar A1 - Sideris, Kosmas A1 - Stelzner, Ludwig A1 - Weber, Benedikt A1 - Weise, Frank T1 - Recommendation of RILEM TC 256-SPF on fire spalling assessment during standardised fire resistance tests: complementary guidance and requirements JF - Materials and Structures N2 - The recommendation is based on the co-authors’ work organized by the RILEM TC 256-SPF “Spalling of concrete due to fire: testing and modelling”. It aims to provide useful information, guidance and best practices in fire spalling assessment to laboratories that perform large-scale tests based on fire resistance test standards. It provides guidance on the spalling observation techniques during testing, as well as post-test spalling quantification/assessment methods. This document is intended to be used in conjunction with the fire resistance test standards, e.g. EN 1363-1 and ISO 834-1. KW - Concrete KW - Fire spalling KW - Large scale tests KW - Standardised fire resistance tests PY - 2024 DO - https://doi.org/10.1617/s11527-023-02248-z SN - 1871-6873 VL - 57 IS - 1 SP - 1 EP - 12 PB - Springer CY - Dordrecht AN - OPUS4-59288 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Emamverdi, Farnaz A1 - Huang, J. A1 - Szymoniak, Paulina A1 - Bojdys, M. J. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Structure and molecular mobility of phosphinine-based covalent organic frameworks – glass transition of amorphous COFs JF - Materials Advances N2 - Two-dimensional covalent organic frameworks (COFs) based on phosphinine and thiophene building blocks have been synthesized with two different side groups. The materials are denoted as CPSF-MeO and CPSF-EtO where CxxF correspond to the covalent framework, whereas P and S are related to heteroatoms phosphorous and sulfur. MeO and EtO indicate the substituents, i.e. methoxy and ethoxy. Their morphologies were studied by scanning electron microcopy and X-ray scattering. The absence of crystalline reflexes in the X-ray pattern reveal that both materials are amorphous and can be considered as glasses. Furthermore, N2 adsorption measurements indicate substantial Brunauer–Emmett–Teller (BET) surface area values pointing to the formation of three-dimensional pores by stacking of the aromatic 2D layer. An analysis of the porosity of both COFs showed a mean radius of the pores to be of ca. 4 nm, consistent with their chemical structure. The COFs form nanoparticles with a radius of around 100 nm. The thermal behavior of the COFs was further investigated by fast scanning calorimetry. These investigations showed that both COFs undergo a glass transition. The glass transition temperature of CPSF-EtO is found to be ca. 100 K higher than that for CPSF-MeO. This large difference in the glass transition is discussed to be due to a change in the interaction of the COF sheets induced by the longer ethoxy group. It might be assumed that for CPSF-EtO more individual COF sheets assemble to larger stacks than for CPSF-MeO. This agrees with the much larger surface area value found for CPSF-EtO compared to CPSF-MeO. To corroborate the results obtained be fast scanning calorimetry dielectric measurements were conducted which confirm the occurrence of a dynamic glass transition. The estimated temperature dependence of the relaxation rates of the dielectric relaxation and their absolute values agrees well with the data obtained by fast scanning calorimetry. Considering the fragility approach to the glass transition, it was further found that CPSF-MeO is a fragile glass former whereas CPSF-EtO behaves as a strong glass forming material. This difference in the fragility points also to distinct differences in the interaction between the 2D COF molecules in both materials. KW - Covalent Organic frameworks PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-596770 DO - https://doi.org/10.1039/d3ma01123b SP - 1 EP - 10 PB - Royal Society of Chemistry (RSC) AN - OPUS4-59677 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Gleim, Tobias A1 - Wille, Frank T1 - Evaluation of Heat Fluxes in Fire Reference Test Conducted in BAM Propane Gas Fire Test Facility T2 - Transactions of SMiRT 27 (27th conference on Structural Mechanics in Reactor Technology) N2 - Packages for the transport of intermediate- and high-level radioactive waste are designed to withstand severe accidents. The International Atomic Energy Agency (IAEA) has established specific mechanical and thermal tests. Packages for the transport of radioactive material must withstand these tests to comply with the Regulations for the Safe Transport of Radioactive Materials IAEA [IAEA (2018)]. A fire reference package was developed with the primary objective to demonstrate that the fire meets the regulatory requirements. Another aim is to characterise the boundary conditions of the actual fire as input parameters for thermo-mechanical simulations. A simple method to characterise the boundary conditions of a real steady state fire with a fire reference package is presented. The thermal test mainly consists of a 30 minute fully engulfing 800°C pool fire or an equally severe fire, such as a propane gas fire. The fire reference tests are performed prior to the actual fire test with the real package. The heat fluxes into the package depend substantially on the fire characteristics and the surface temperature of the package. To investigate local and overall heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for repeated use. The fire reference package presented in this paper represents the outer geometry of a small transport container for radioactive material and is used as a device in civil engineering. It is designed as a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 182 mm and a diameter of 102 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Open-air fire tests were performed in a BAM propane gas fire test facility with the fire reference package. The measured temperatures are used to determine the changes of heat fluxes into the fire reference package in relation to the package surface temperature. The calculated heat fluxes allow its fitting to express the thermal exposure as simple mathematical boundary condition. Therefore, in a first approach, fire properties such as adiabatic surface temperature (AST) as proposed by Wickström et al. (2007), convection coefficient and emissivity are determined mathematically fitting the heat flux development presented in this paper. The evaluated results provide an initial picture of local fire characteristics of the conducted propane gas fire and are a further development of previous works from Feldkamp et al. (2020). The results can be used in thermal and thermo-mechanical models to simulate the load on the real transport package in fire. The test shows that the examined propane gas fire covers the IAEA-fire over a wide range of surface temperatures with the chosen test stand parameters. T2 - SMiRT 27 (27th conference on Structural Mechanics in Reactor Technology) CY - Yokohama, Japan DA - 03.03.2024 KW - Fire KW - Propane KW - Heat Flux KW - Fire Reference PY - 2024 SP - 1 EP - 10 PB - IASMiRT AN - OPUS4-59679 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Szymoniak, Paulina A1 - Kolmangadi, Mohamed A. A1 - Juranyi, Fanni A1 - Böhning, Martin A1 - Zorn, Reiner A1 - Schönhals, Andreas T1 - Low-Frequency Vibrational Density of State of Janus-Polynorbornenes: The Dependence of the Boson Peak on the Nanophase-Separated Structure JF - Macromolecules N2 - Inelastic incoherent neutron time-of-flight scattering was employed to investigate the low-frequency vibrational density of states (VDOSs) for a series of glassy Janus-poly(tricyclononenes), which consist of a rigid main chain and flexible alkyl side chains. Here, the length of the flexible side chains was systematically varied from propyl to octyl. Such materials have potential applications as active separation layers in gas separation membranes as a green future technology, especially for the separation of higher hydrocarbons. From the morphological point of view, the Janus polynorbornenes undergo a nanophase separation into alkyl side chain-rich nanodomains surrounded by a rigid polynorbornene matrix. Here, the influence of the nanophase-separated structure on the low-frequency VDOS is investigated from a fundamental point of view. The low-frequency VDOSs of these Janus polynorbornene show excess contributions to the Debye type VDOS known as the Boson peak (BP) for all side chain lengths. Due to the high incoherent scattering cross-section of hydrogen, most of the scattering comes from the alkyl side chain-rich domains. Compared to conventional glass-forming materials, in the considered Janus polynorbornenes, the BP has a much lower intensity and its frequency position is shifted to higher values. These experimental results are discussed in terms of the nanophase-separated structure where the alkyl chain-rich domains were constrained by the surrounding matrix dominated by the rigid backbone. With increasing alkyl chain length, the size of the alkyl chain-rich domains increases. The frequency position of the BP shifts linearly to lower frequencies with the size of these nanodomains estimated from X-ray measurements. The obtained results support the sound wave interpretation to the BP KW - Inelastic neutron scattering PY - 2023 DO - https://doi.org/10.1021/acs.macromol.3c00913 SN - 0024-9297 SP - 1 EP - 10 PB - ACS AN - OPUS4-57972 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Ecker, K. H. A1 - Wätjen, U. A1 - Berger, Achim A1 - Grötzschel, R. A1 - Persson, L. A1 - Pritzkow, W. A1 - Radtke, Martin A1 - Riebe, Gundel A1 - Riesemeier, Heinrich A1 - Vogl, Jochen T1 - Certification of antimony implanted in silicon wafer with a silicon dioxide diffusion barrier - IRMM-302 and BAM-L001 T2 - IRMM and BAM Information Reference Materials N2 - This Report describes the certification of the reference material antimony implanted in Si/SiO2 intended to be used for calibration of surface and near surface analytical methods. It describes the preparation, homogeneity measurements and the analytical work performed for the certification of both Areal density of antimony Atoms (retained dose) and the isotope amount Ratio as well as giving considerations on the stability of the material. KW - Isotope ratio KW - Areal density KW - Surface analysis PY - 2002 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-355752 SP - 1 EP - 40 PB - Institute for Reference Materials and Measurements CY - Geel, Belgium AN - OPUS4-35575 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Gardei, André A1 - Niederleithinger, Ernst A1 - Hasenstab, Andreas A1 - Hemmleb, Matthias A1 - Wiggenhauser, Herbert A1 - Borchardt, Kerstin T1 - ZfPBau-Kompendium 2004 N2 - Dieses Kompendium ist ein kurzgefasster Abriss, ein Leitfaden und auch ein Handbuch der für den Einsatz im Bauwesen geeigneten zerstörungsfreien Prüfverfahren. In strenger, stets gleicher Gliederung wird jede der mehr als 100 Untersuchungsmethoden in einem eigenen Geräteblatt beschrieben. Hinzu kommen Querverweise zu alternativen Prüfmethoden sowie zahlreiche Hinweise auf einschlägige Fachliteratur und zu bekannt gewordenen Geräteherstellern, Lieferanten und Dienstleistern. PY - 2007 N1 - Das "ZfPBau-Kompendium 2004" war eine Datenbank, die von 2007 bis 2015 im Internet verfügbar war; sie wurde ersatzlos vom Netz genommen, als sie nicht mehr aktuell war – The "ZfPBau-Kompendium 2004" was a database that was accessible on the internet from 2007 to 2015; it was deleted without replacement when it wasn't up-to-date anymore PB - Bundesanstalt für Materialforschung und -prüfung CY - Berlin AN - OPUS4-1497 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Frisch, A. A1 - Merchel, Silke A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Vogl, Jochen ED - Röhrs, S. T1 - Synchrotron-XRF und PIXE Untersuchungen an bronzezeitlichen Fussringen T2 - Archäometrie und Denkmalpflege (Jahrestagung ... / AK Archäometrie in der GDCh 2003) T2 - Jahrestagung 2003 im Ethnologischen Museum Berlin-Dahlem CY - Berlin, Deutschland DA - 2003-03-12 PY - 2003 SN - 3-00-014223-1 SN - 0949-4057 SP - 101 EP - 103 CY - [Frankfurt am Main] AN - OPUS4-2355 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Recknagel, Sebastian A1 - Breitenbach, Martin A1 - Pautz, Joachim A1 - Lück, Detlef T1 - Purity of potassium hydrogen phthalate, determination with precision coulometric and volumetric titration-A comparison JF - Analytica chimica acta N2 - The mass fraction of potassium hydrogen phthalate (KHP) from a specific batch was certified as an acidimetric standard. Two different analytical methods on a metrological level were used to carry out certification analysis: precision constant current coulometric and volumetric titration with NaOH. It could be shown that with a commercial automatic titration system in combination with a reliable software for the end-point detection it is possible to produce equivalent results with the same accuracy in comparison to a definite method handled by a fundamental apparatus for traceable precision coulometry. Prerequisite for titrations are that a high number of single measurement are applied which are calibrated with a high precision certified reference material. KW - Potassium hydrogen phthalate KW - Precision constant current coulometry KW - Volumetric titration KW - Certified reference material PY - 2007 DO - https://doi.org/10.1016/j.aca.2007.07.062 SN - 0003-2670 SN - 1873-4324 SN - 0378-4304 VL - 599 IS - 2 SP - 256 EP - 263 PB - Elsevier CY - Amsterdam AN - OPUS4-15816 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zoega, A. A1 - Krause, Martin A1 - Kurz, J. A1 - Maack, Stefan A1 - Küttenbaum, Stefan A1 - Boßmann, N. T1 - Ultraschalluntersuchungen zur Rissdetektion an Spannbetonschwellen JF - Messtechnik im Bauwesen N2 - Im deutschen Eisenbahnnetz sind ca. 80 Millionen Spannbetonschwellen verbaut. Analog zu anderen Bauwerken werden Wpannbetonschwellen regelmäßig visuell inspiziert. Die Rissbildung ist bei diesen Inspektionen ein Kriterium für die Schädigung einer Spannbetonschwelle. Durch Rissbildung kann es passieren, dass Betonschwellen ihre Nutzungsdauer nicht erreichen. KW - ZfPBau KW - Spannbeton PY - 2017 VL - März 2017 IS - Ernst & Sohn Special 2017 SP - 20 EP - 22 PB - Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG CY - Berlin AN - OPUS4-48112 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen T1 - Boron isotope compositions of food: A potential tool for food authentication T2 - Jahrestagung Deutsche Mineralogische Gesellschaft 2008 T2 - Jahrestagung Deutsche Mineralogische Gesellschaft 2008 CY - Berlin, Deutschland DA - 2008-09-14 KW - Boron isotopes KW - Food KW - Provenance studies PY - 2008 SP - 1 CY - Berlin AN - OPUS4-20785 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogl, Jochen A1 - Rosner, Martin A1 - Pritzkow, Wolfgang T1 - The need for new isotope reference materials JF - Analytical and bioanalytical chemistry N2 - Isotope reference materials are needed to calibrate and validate analytical procedures used for the determination of isotope amount ratios, procedurally defined isotope ratios or so-called δ values. In contrast to the huge analytical progress in isotope ratio analytics, the production of isotope reference materials has not kept pace with the increasing needs of isotope analysts. Three representative isotope systems are used to explain the technical and non-technical difficulties and drawbacks, on one hand, and to demonstrate what can be achieved at its best, on the other hand. A clear statement is given that new isotope reference materials are needed to obtain traceable and thus comparable data, which is essential for all kinds of isotope research. The range of available isotope reference materials and δ reference materials should be increased and matrix reference materials certified for isotope compositions or δ values, which do not exist yet, should be provided. KW - Isotope reference materials KW - Delta reference materials KW - Synthetic isotope mixtures KW - Mass spectrometry KW - Comparability KW - Traceability KW - Measurement uncertainty PY - 2013 DO - https://doi.org/10.1007/s00216-012-6605-3 SN - 1618-2642 SN - 1618-2650 VL - 405 IS - 9 SP - 2763 EP - 2770 PB - Springer CY - Berlin AN - OPUS4-28169 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Krause, Martin A1 - Borchardt, Kerstin A1 - Lange, Marco A1 - Behrens, Matthias A1 - Maack, Stefan A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Schaurich, Dieter A1 - Wöstmann, Jens A1 - Hintzpeter, F. A1 - Sodeikat, C. T1 - Kosteneinsparung durch Anwendung zerstörungsfreier Prüfverfahren für Betonbauteile beim Bauen im Bestand T2 - Bauforschung für die Praxis N2 - In Zeiten knapper Kassen wird überall nach Wegen gesucht Kosten einzusparen. Im Bauwesen geht es dabei um Kosteneinsparungen ohne Reduktion der Sicherheit und Dauerhaftigkeit des Bauwerks. Beim Bauen im Bestand können mit einer zerstörungsfreien Prüfung von Bauwerken die Weiternutzung oder die erforderlichen Umbauten optimiert werden und so Kosten eingespart werden. KW - Zerstörungsfreie Prüfung KW - Bauen im Bestand KW - Radar KW - Ultraschallecho KW - Kosteneinsparung PY - 2011 SN - 978-3-8167-8611-5 VL - 101 SP - 1 EP - 95 PB - Fraunhofer IRB Verl. CY - Stuttgart ET - Abschlussbericht AN - OPUS4-26649 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Müller, Sabine A1 - Niederleithinger, Ernst A1 - Krause, Martin A1 - Bohlen, T. T1 - Reverse time migration: A seismic imaging technique applied to ultrasound data T2 - NDE/NDT for highways and bridges - Structural materials technology (SMT) T2 - NDE/NDT for highways and bridges - Structural materials technology (SMT) CY - New York, USA DA - 2010-08-16 KW - Ultraschall KW - Rekonstruktion KW - Migration PY - 2010 SN - 978-1-57117-211-2 SP - 554 EP - 559 CY - Columbus, OH, USA AN - OPUS4-22543 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Vogl, Jochen T1 - Three new offset Delta11B isotope reference materials for environmental boron isotope studies T2 - International symposium on isotopes in hydrology, marine ecosystems and climate change studies (Proceedings) N2 - The isotopic composition of boron is a well established tool in various areas of Science and industry. Boron isotope compositions are typically reported as 5nB values which indicate the isotopic difference of a sample relative to the isotope reference material NIST SRM 951. A significant drawback of all of the available boron isotope reference materials is that none of them covers a natural boron isotope composition apart from NIST SRM 951. To fill this gap of required 5UB reference materials three new solution boric acid reference materials were produced, which cover 6096o of the natural boron isotope Variation (-20 to 40%oo B) of about 100%o. The new reference materials are certified for their B values and are commercially available through European Reference Materials® (http://wwrv.enn-cmi.org). The newly produced and certified boron isotope reference materials will allow straightforward method Validation and quality control of boron isotope data. T2 - International symposium on isotopes in hydrology, marine ecosystems and climate change studies CY - Monaco DA - 27.03.2011 KW - Boron KW - Boron isotope variations KW - Delta-scale KW - Stable isotopes KW - Isotope reference materials KW - Delta reference materials KW - Metrology in chemistry PY - 2011 SN - 978-92-0-135610-9 VL - 2 SP - 377 EP - 380 AN - OPUS4-31858 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, Simon A1 - Jurtz, N. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Accelerating chemical process development and manufacturing – Design and validation of an integrated NMR micro mixer N2 - The future competitiveness of the process industry and their providers depends on its ability to deliver high quality and high value products at competitive prices in a sustain-able fashion, and to adapt quickly to changing customer needs. The transition of pro-cess industry due to the mounting digitalization of technical devices and their provided data used in chemical plants proceeds. Though, the detailed characteristics and con-sequences for the whole chemical and pharmaceutical industry are still unforeseeable, new potentials arise as well as questions regarding the implementation. As the digitali-zation gains pace fundamental subjects like the standardization of device interfaces or organization of automation systems must be answered. Still, process industry lack of sufficient system and development concepts with commercial advantage from this trend. Compared to traditional batch processes, intensified continuous production allows new and difficult to produce compounds with better product uniformity and reduced con-sumption of raw materials and energy. Flexible (modular) chemical plants can produce various products using the same equipment with short down-times between cam-paigns, and quick introduction of new products to the market. Full automation is a prerequisite to realize such benefits of intensified continuous plants. In continuous flow processes, continuous, automated measurements and closed-loop control of the product quality are required. Consequently, the demand for smart sensors, which can monitor key variables like component concentrations in real-time, is increasing. Low-Field NMR spectroscopy presents itself as such an upcoming smart sensor1,2 (as addressed, e.g., in the CONSENS project3). Systems utilizing such an online NMR analyzer benefits through short development and set-up times when applied to modular production plants starting from a desired chemi-cal reaction3. As an example for such a modular process unit, we present the design and validation of an integrated NMR micro mixer based on computational modelling suited for a desired chemical reaction. This method includes a proper design of a con-tinuous reactor, which is optimized through computational fluid dynamics (CFD) for the demands of the NMR sensor as well as for the given reaction conditions. The system was validated with a chemical reaction process. T2 - Practical Application of NMR in Industry Conference CY - HIlton Head Island, SC, USA DA - 04.03.2019 KW - NMR KW - Benchtop KW - Flow Cell KW - Inline PY - 2019 N1 - Geburtsname von Bornemann-Pfeiffer, Martin: Bornemann, M. - Birth name of Bornemann-Pfeiffer, Martin: Bornemann, M. AN - OPUS4-47568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, S. A1 - Wander, L. A1 - Meyer, Klas A1 - Maiwald, Michael T1 - Modular production involving benchtop NMR Current Application Examples Driven by Digitalization N2 - The demand for increasing product diversity in the chemical and pharmaceutical industry calls for new production processes that enable greater flexibility. Therefore, plants are needed which can be adapted to new processes in a fast manner and be scaled up and down easily to volatile market demands. Modular production techniques in combination with advanced process analytical technology (PAT) are considered as a promising solution able to fulfil these requirements. The success and acceptance of modular concepts in both new and existing plants is dependent of its reliability, easy applicability, and standardization. In recent past, enormous efforts were made to overcome existing barriers in a superordinate level, e.g. DEXPI, ENPRO, or MTP naming just a few. Here, we’d like to present a few, more hands-on, application examples which are shown in Figure 1 aiming to increase process flexibility and applicability. T2 - AK Prozessanalytik Jahrestagung 2022 CY - Amersfoort, The Netherlands DA - 19.09.2022 KW - Process analytical technology KW - NMR spectroscopy KW - Digitization KW - Additive manufacturing PY - 2022 AN - OPUS4-55976 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Guhl, Svetlana A1 - Kern, Simon A1 - Meyer, Klas A1 - Wander, Lukas A1 - Bornemann-Pfeiffer, Martin A1 - Maiwald, Michael T1 - Produzieren Sie schon oder kalibrieren Sie noch? – Online-NMR-Spektrometer als Smarte Feldgeräte T2 - Chemie Ingenieur Technik N2 - Der Vortrag zeigt allgemeine Anforderungen an "smarte Feldgeräte" und deren Entwicklung in den vergangenen Jahren. Am Beispiel eines smarten Online-NMR-Sensors, der in einem EU-Projekt von der BAM entwickelt wurde, wird die Umsetzung der Anforderung aufgezeigt. Schließlich werden weitere Technologieanforderungen und Lösungsansätze vorgestellt. T2 - ProcessNet-Jahrestagung und 33. DECHEMA-Jahrestagung der Biotechnologen CY - Aachen, Germany DA - 10.09.2018 KW - Prozessanalytik KW - Prozessindustrie KW - Online-NMR-Spektroskopie KW - Datenkonzepte KW - Datenanalyse KW - CONSENS PY - 2018 UR - https://onlinelibrary.wiley.com/doi/abs/10.1002/cite.201855229 DO - https://doi.org/10.1002/cite.201855229 SN - 0009-286X N1 - Geburtsname von Bornemann-Pfeiffer, Martin: Bornemann, M. - Birth name of Bornemann-Pfeiffer, Martin: Bornemann, M. VL - 90 IS - 9 SP - 1236 EP - 1236 PB - Wiley-VCH Verlag GmbH & Co. KGaA CY - Weinheim AN - OPUS4-45901 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Martin T1 - Maßnahmen zum Qualitäts- und Alterungsmanagement nicht zulassungspflichtiger Bauarten von Versandstücken zur Beförderung radioaktiver Stoffe T2 - BAM-Gefahrgutregeln N2 - Die BAM-GGR 016 erläutert die Anforderungen des ADR, RID, ADN und IMDG hinsichtlich notwendiger Maßnahmen zum Qualitäts- und Alterungsmanagement bei der Auslegung, Herstellung, Prüfung, Dokumentation, Gebrauch, Wartung und Inspektion von nicht-zulassungspflichtigen Versandstücken für radioaktive Stoffe für alle Bauarten von freigestellten Versandstücken, Industrieversandstücken des Typs IP-1, IP-2 und IP-3 und Versandstücken des Typs A. KW - Radioaktive Stoffe KW - Transport KW - Beförderung KW - Nicht-zulassungspflichtig KW - Prüfpflichtig PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-595229 VL - BAM-GGR 016 SP - 1 EP - 26 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin ET - Revision 1 AN - OPUS4-59522 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kern, Simon A1 - Liehr, Sascha A1 - Wander, Lukas A1 - Bornemann-Pfeiffer, Martin A1 - Müller, S. A1 - Maiwald, Michael A1 - Kowarik, Stefan T1 - Artificial neural networks for quantitative online NMR spectroscopy JF - Analytical and bioanalytical chemistry N2 - Industry 4.0 is all about interconnectivity, sensor-enhanced process control, and data-driven systems. Process analytical technology (PAT) such as online nuclear magnetic resonance (NMR) spectroscopy is gaining in importance, as it increasingly contributes to automation and digitalization in production. In many cases up to now, however, a classical evaluation of process data and their transformation into knowledge is not possible or not economical due to the insufficiently large datasets available. When developing an automated method applicable in process control, sometimes only the basic data of a limited number of batch tests from typical product and process development campaigns are available. However, these datasets are not large enough for training machine-supported procedures. In this work, to overcome this limitation, a new procedure was developed, which allows physically motivated multiplication of the available reference data in order to obtain a sufficiently large dataset for training machine learning algorithms. The underlying example chemical synthesis was measured and analyzed with both application-relevant low-field NMR and high-field NMR spectroscopy as reference method. Artificial neural networks (ANNs) have the potential to infer valuable process information already from relatively limited input data. However, in order to predict the concentration at complex conditions (many reactants and wide concentration ranges), larger ANNs and, therefore, a larger Training dataset are required. We demonstrate that a moderately complex problem with four reactants can be addressed using ANNs in combination with the presented PAT method (low-field NMR) and with the proposed approach to generate meaningful training data. KW - Online NMR spectroscopy KW - Real-time process monitoring KW - Artificial neural networks KW - Automation KW - Process industry PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-507508 DO - https://doi.org/10.1007/s00216-020-02687-5 SN - 1618-2642 VL - 412 IS - 18 SP - 4447 EP - 4459 PB - Springer CY - Berlin AN - OPUS4-50750 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bornemann-Pfeiffer, Martin A1 - Kern, Simon A1 - Maiwald, Michael A1 - Meyer, Klas T1 - Calibration-Free Chemical Process and Quality Control Units as Enablers for Modular Production JF - Chemie Ingenieur Technik N2 - Modular chemical production is a tangible translation of the digital transformation of the process industry for specialty chemicals. In particular, it enables the speeding-up of process development and thus a quicker time to market by flexibly connecting and orchestrating standardised physical modules and bringing them to life (i.e., parameterising them) with digitally accumulated process knowledge. We focus on the specific challenges of chemical process and quality control, which in its current form is not well suited for modular production and provide possible approaches and examples of the change towards direct analytical methods, analytical model transfer or machine-supported processes. KW - Modular Production KW - Chemical Process Control KW - Process Analytical Technology KW - Digital Transformation KW - Industry 4.0 PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517264 DO - https://doi.org/10.1002/cite.202000150 SN - 1522-2640 VL - 93 IS - 1-2 SP - 62 EP - 70 PB - Wiley-VCH CY - Weinheim AN - OPUS4-51726 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bornemann-Pfeiffer, Martin A1 - Meyer, Klas A1 - Lademann, J. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Contributions towards variable temperature shielding for compact NMR instruments JF - Magnetic Resonance in Chemistry N2 - The application of compact NMR instruments to hot flowing samples or exothermically reacting mixtures is limited by the temperature sensitivity of permanent magnets. Typically, such temperature effects directly influence the achievable magnetic field homogeneity and hence measurement quality. The internal-temperature control loop of the magnet and instruments is not designed for such temperature compensation. Passive insulation is restricted by the small dimensions within the magnet borehole. Here, we present a design approach for active heat shielding with the aim of variable temperature control of NMR samples for benchtop NMR instruments using a compressed airstream which is variable in flow and temperature. Based on the system identification and surface temperature measurements through thermography, a model predictive control was set up to minimise any disturbance effect on the permanent magnet from the probe or sample temperature. This methodology will facilitate the application of variable-temperature shielding and, therefore, extend the application of compact NMR instruments to flowing sample temperatures that differ from the magnet temperature. KW - Benchtop NMR KW - Continuous Processes KW - Inline Analytics KW - Model Predictive Control KW - Process Analytical Tecnology KW - Temperature Control PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-579219 DO - https://doi.org/10.1002/mrc.5379 SN - 1097-458X SP - 1 EP - 10 PB - John Wiley & Sons Ltd. AN - OPUS4-57921 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Niederleithinger, Ernst A1 - Herbrand, Martin A1 - Müller, Matthias T1 - Codawelleninterferometrie zur Detektion von Spannungszuständen in Betonbauteilen T2 - DGZfP Jahrestagung 2018 N2 - Informationen zu in Betonbauteilen stattfindenden Umlagerungsprozessen sowie Druckspannungsverteilungen können mit konventioneller Messtechnik bislang nicht zweifelsfrei beantwortet werden. Ultraschallmessungen mit eingebetteten Sensoren könnten hier eine sinnvolle Ergänzung zur konventionellen Messtechnik sein. Durch Einsatz der Codawelleninterferometrie (CWI) sind hiermit schon sehr kleine Änderungen im Material detektierbar. Um diese neue Methodik zu evaluieren, wurde das Forschungsprojekt „Querkrafttragfähigkeit von Spannbetonbrücken – Erfassung von Spannungszuständen in den Spannbetonversuchsträgern mit Ultraschallsensoren“ durch die Bundesanstalt für Straßenwesen (BASt) initiiert. In diesem Projekt wurden durch die Bundesanstalt für Materialforschung und –prüfung (BAM) Ultraschall-Transducer in mehrere Spannbetonträger des Instituts für Massivbau der RWTH Aachen eingebettet, die anschließend bis zum Bruch belastet wurden. Der Belastungsversuch an einem der Spannbetondurchlaufträger zeigte das große Potential dieser Methodik. Die im Netzwerk erfassten Änderungen der Ultraschallwellengeschwindigkeit geben die Spannungsverhältnisse im Längsschnitt des Trägers schon bei sehr niedrigen Belastungen qualitativ richtig wieder und zeigen bei hohen Belastungen eine gute Korrelation zum Rissbild. Dabei weisen räumliche Anomalien und Änderungen in der Charakteristik der Geschwindigkeitsänderungen oft schon auf Rissbildung hin, wenn diese noch nicht an der Oberfläche sichtbar ist. Dies zeigt das Potential im Hinblick auf eine Frühwarnung. Hierfür und ebenso in Bezug auf eine Quantifizierung der Effekte ist aber noch Entwicklungsarbeit notwendig. Ein Vorteil der Methodik ist, dass die Transducer nicht direkt am Ort der Änderung platziert werden müssen und einen relativ großen Bereich um die Transducer herum erfassen. T2 - DGZfP Jahrestagung 2018 CY - Leipzig, Germany DA - 07.05.2018 KW - Ultraschall KW - Monitoring KW - Codawelleninterferometrie KW - Brückenträger PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-448642 SP - Mo.3.A.4, 1 EP - 8 PB - DGZfP AN - OPUS4-44864 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen A1 - Voerkelius, S. T1 - Development and validation of a method to determine the boron isotopic composition of crop plants JF - Analytical chemistry N2 - We present a comprehensive chemical and mass spectrometric method to determine boron isotopic compositions of plant tissue. The method including dry ashing, a three-step ion chromatographic boron–matrix separation, and 11B/10B isotope ratio determinations using the Cs2BO2+ graphite technique has been validated using certified reference and quality control materials. The developed method is capable to determine δ11B values in plant tissue down to boron concentrations of 1 mg/kg with an expanded uncertainty of ≤1.7‰ (k = 2). The determined δ11B values reveal an enormous isotopic range of boron in plant tissues covering three-quarters of the natural terrestrial occurring variation in the boron isotopic composition. As the local environment and anthropogenic activity mainly control the boron intake of plants, the boron isotopic composition of plants can be used for food provenance studies. KW - Boron isotope variations KW - Delta-scale KW - Stable isotopes KW - Isotope reference materials KW - Provenance KW - Authenticity PY - 2011 DO - https://doi.org/10.1021/ac102836h SN - 0003-2700 SN - 1520-6882 VL - 83 IS - 7 SP - 2562 EP - 2568 PB - American Chemical Society CY - Washington, DC AN - OPUS4-23495 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Vogl, Jochen T1 - Three new offset delta 11 B isotope reference materials for environmental boron isotope studies T2 - IAEA 2011 - "International Symposium on Isotopes in Hydrology, Marine Ecosystems, and Climate Change Studies" T2 - IAEA 2011 - "International Symposium on Isotopes in Hydrology, Marine Ecosystems, and Climate Change Studies" CY - Monaco DA - 2011-03-27 PY - 2011 AN - OPUS4-23815 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Vogl, Jochen T1 - New offset delta 11 B isotope reference materials for geochemical and environmental boron isotope studies T2 - Goldschmidt Tagung 2011 T2 - Goldschmidt Tagung 2011 CY - Prague, Czech Republic DA - 2011-08-14 PY - 2011 AN - OPUS4-23817 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Niederleithinger, Ernst A1 - Wiggenhauser, Herbert T1 - Non-destructive testing methods at BAM for damage assessment and quality assurance in civil engineering T2 - International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) N2 - The structural safety, durability and performance of the infrastructure is of primary interest in every country. An efficient system for early and regular structural assessment as well as for quality assurance during and after the construction of new structures and of reconstruction processes is urgently required. At BAM, NDT methods to be applied in civil engineering are developed and their application improved. From the experience of on-site assessments, quality assurance systems and methodologies for regular inspections are elaborated. This work is mainly performed in the frame of externally funded research projects. T2 - 6th International Symposium Non-Destructive Testing in Civil Engineering (NDT-CE) CY - Berlin, Germany DA - 2003-09-16 KW - Non-destructive testing in civil engineering KW - Radar KW - Ultrasonics KW - Impact-echo KW - Impulse thermography KW - Concrete KW - Masonry PY - 2003 UR - http://www.ndt.net/article/ndtce03/papers/v068/v068.htm SN - 3-931381-49-8 PB - DGZfP CY - Berlin AN - OPUS4-3160 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosner, Martin A1 - Vogl, Jochen T1 - New offset Delta11B isotope reference materials for geochemical and environmental boron isotope studies JF - Mineralogical magazine N2 - The isotopic composition of boron is a well established tool in various areas of Science and industries. Boron isotope compositions are typically reported as 6"B values which indicate the isotopic difference of a sample relative to the internationally accepted isotope reference material NIST SRM 951. A significant drawback of all of the available boron isotope reference materials is that non covers a natural boron isotope composition apart from NIST SRM 951. PY - 2011 SN - 1471-8022 VL - 75 IS - 3 SP - 1755 PB - Mineralogical Society of Great Britain and Ireland CY - London AN - OPUS4-32684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Maack, Stefan A1 - Krause, Martin ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Diagnostic investigations of wooden structures using ultrasonic-echo technique T2 - First Internatonal RILEM Symposium "on Site Assessment of Concrete, Masonry and Timber Structures" (SACoMaTiS 2008), September 1-2, 2008, Varenna, Italy (Proceedings) T2 - First Internatonal RILEM Symposium "on Site Assessment of Concrete, Masonry and Timber Structures" (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 PY - 2008 SN - 978-2-35158-063-9 VL - 2 IS - PRO 59 SP - 1 EP - 10 PB - RILEM Publications AN - OPUS4-18219 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Krause, Martin A1 - Dérobert, X. A1 - Hugenschmidt, J. A1 - Moczko, A. A1 - Niederleithinger, Ernst A1 - Taffe, Alexander ED - L. Binda, ED - M. di Prisco, ED - R. Felicetti, T1 - Benchmark for thickness measurement of concrete elements T2 - 1st International RILEM Conference - on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008), Proceedings T2 - 1st International RILEM Conference, on Site Assessment of Concrete, Masonry and Timber Structures (SACoMaTiS 2008) CY - Varenna, Italy DA - 2008-09-01 KW - Thickness measurement KW - Radar KW - Ultrasonic Echo KW - Impact-Echo and Low Strain Techniques PY - 2008 SN - 978-2-35158-062-2 VL - 1 IS - PRO 59 SP - 357 EP - 366 PB - RILEM Publications AN - OPUS4-18030 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krause, Martin A1 - Dérobert, X. A1 - Hugenschmidt, J. A1 - Moczko, A. A1 - Niederleithinger, Ernst A1 - Taffe, Alexander T1 - Benchmarks for Thickness Measurement of Concrete Elements T2 - SACoMaTiS 2008, International RILEM Conference T2 - SACoMaTiS 2008, International RILEM Conference CY - Varenna, Italy DA - 2008-09-01 PY - 2008 AN - OPUS4-18066 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Vogl, Jochen A1 - Rosner, Martin ED - Boschung, D. ED - Bremmer, J.N. T1 - Lead isotope analysis of an ancient voodoo doll T2 - The materiality of magic KW - Archaeometry KW - Isotopes KW - Lead PY - 2015 SN - 978-3-7705-5725-7 SP - 127 EP - 132, Plates 1-5 PB - Wilhelm Fink GmbH & Co. Verlags-KG CY - Paderborn AN - OPUS4-33034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Wiggenhauser, Herbert A1 - Helmerich, Rosemarie A1 - Krause, Martin A1 - Mielentz, Frank A1 - Niederleithinger, Ernst A1 - Taffe, Alexander A1 - Wilsch, Gerd ED - Naus, D. T1 - Non-destructive Testing of Nuclear Power Plant Concrete Structures State of the Art Report T2 - BAM research report N2 - Nuclear Power Plants have been in operation for ca. 50 years. Based on this experience, non-destructive testing tasks specific to thick and highly reinforced nuclear containment structures have materialized. The performance based Service life extension of existing NPPs also needs a measurement based decision to support continuing the service of the concrete part of the installations. By nature, concrete is a very durable material and any natural Deterioration processes may take a long time to become critical to the structure. The experience of more than 50 years of service limits the testing tasks to a few ones which are not yet solved. Research in NDT of concrete structures is performed by many research institutions all over the world with different technical and systematic approaches. Results are mainly obtained on laboratory specimens, sometimes additional field studies are reported. This research takes place independently without coordination and as a result, the outcomes mostly lack full comparability. Software for data analysis has become indispensable and very powerful. This part of testing needs more attention when it comes to evaluate test results. Validation of NDE solutions is becoming a critical part in concrete structure testing. Validation is by definition the proof that a customer´s requirements in the test are being met by the testing solution. This includes equipment, personnel qualification and data analysis. In the following tables, the research recommendation Validation is used in the sense, that proof of the performance of existing solutions needs to be adressed. In general, a validation methodology for NDE solutions for concrete testing in itself needs to be researched and established. Comparability of research also needs an accepted and easily accessible reference. From experience, it is almost impossible to manufacture exact copies of test specimens at different locations. Round Robin tests are therefore needed to evaluate the performance of a test. Data evaluation is generally done using dedicated software, sometimes Hardware dependant and not interchangeable between systems. Software is ever more increasingly becoming more powerful and sophisticated. An in-depth evaluation needs to address the comparability and validation of Software used for data analysis and evaluation. The vision of a unified software pool for NDE investigations would undoubtedly support research tremendously. Quantitative NDE is mostly recommended to assess the condition of a structure. However, qualitative data can be very useful, especially for processes which change the material properties or deteriorate the structure (e.g. corrosion of reinforcement). The need for reliable baseline data is a key factor for such monitoring tasks. KW - Nuclear structures KW - Non-destructive testing KW - State of the art KW - Research needs PY - 2013 SP - 1 EP - 120 PB - BAM CY - Berlin AN - OPUS4-51049 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Taffe, Alexander A1 - Niederleithinger, Ernst A1 - Krause, Martin A1 - Milmann, Boris T1 - Zerstörungsfreie Untersuchungen an Fundamentplatten mit Ultraschallecho JF - Beton- und Stahlbetonbau KW - Zerstörungsfreie Prüfung im Bauwesen KW - ZfPBau KW - Ultraschallecho KW - Dickenmessung KW - Fundamente KW - Baustellenscanner KW - Wiedernutzung PY - 2004 SN - 0005-9900 SN - 1437-1006 VL - 99 IS - 12 SP - 1000 EP - 1004 PB - Ernst CY - Berlin AN - OPUS4-5284 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Taffe, Alexander A1 - Krause, Martin A1 - Milmann, Boris A1 - Niederleithinger, Ernst ED - Alexander, M. T1 - Assessment of foundation slabs with US-echo in the re-use process T2 - Concrete repair, rehabilitation and retrofitting - proceedings of the International Conference on Concrete Repair, Rehabilitation and Retrofitting N2 - During the re-use process of existing concrete memebers like foundations information about geometry and location of piles or strip foundation is necessary. Ultrasonic echo with a need of only one-sided access may provide this information and help the engineer to assess foundations. Cost effectiveness by the re-use of foundations gains an increasing economic role due to decreasing average economic lifetime of buildings on urban sites. Results of systematic ultrasonic echo investigations at a slab from 75 cm to 125 cm thickness with ten different reinforcement ratios are presented. The influence of the varying reinforcement ratio and thickness on the reliability of the results is shown. Available data-processing algorithms based on reconstruction calculation and imaging of results to reveal the geometry of a slab and the location of piles or strip foundations are introduced. Practical guidance for the application of ultrasonic echo and its limits are presented to ensure reliable results. T2 - International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR) CY - Cape Town, South Africa DA - 2006-11-21 KW - Ultraschallecho KW - Fundamentdicke KW - Bildgebende Darstellung KW - Wiedernutzung von Fundamenten KW - SAFT KW - ZfP im Bauwesen KW - Objektortung PY - 2006 SN - 0-415-39654-9 N1 - Serientitel: Balkema proceedings and monographs in engineering, water and earth sciences – Series title: Balkema proceedings and monographs in engineering, water and earth sciences SP - 525 EP - 530 PB - Taylor & Francis CY - London AN - OPUS4-11681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen A1 - Voerkelius, S. T1 - Boron isotope compositions of crop plants: A new tracer for the origin and authenticity of food T2 - TRACE 5th annual meeting and conference - TRACE in practice - New methods and systems for confirming the origin of food; including Isotope ratio mass spectrometry (IRMS)-workshop T2 - TRACE 5th annual meeting and conference - TRACE in practice - New methods and systems for confirming the origin of food; including Isotope ratio mass spectrometry (IRMS)-workshop CY - Freising, Germany DA - 2009-04-01 PY - 2009 AN - OPUS4-20435 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Maack, Stefan A1 - Krause, Martin T1 - Ultraschall-Echoverfahren an Holzbauteilen beim Bauen im Bestand T2 - DGZfP-Jahrestagung 2009 T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 2009-05-18 PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 (Vortrag Mi.1.C.1) SP - 1 EP - 8 AN - OPUS4-20756 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen T1 - Borisotopie: Ein potentieller Tracer für die Herkunft von Lebensmitteln T2 - 21. ICP-MS Anwendertreffen und 8. Symposium über Massenspektrometrische Verfahren der Elementspurenanalyse T2 - 21. ICP-MS Anwendertreffen und 8. Symposium über Massenspektrometrische Verfahren der Elementspurenanalyse CY - Dresden, Germany DA - 2009-09-17 PY - 2009 AN - OPUS4-20433 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen T1 - Boron isotope compositions of crop plants: A new tracer for the origin and authenticity of food T2 - TRACE 5th annual meeting and conference - TRACE in practice T2 - TRACE 5th annual meeting and conference - TRACE in practice CY - Freising, Germany DA - 2009-04-01 PY - 2009 AN - OPUS4-20643 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Pritzkow, Wolfgang A1 - Vogl, Jochen T1 - Authentication of bell peppers using boron and strontium isotope compositions T2 - European Geosciences Union, General Assembly 2010 T2 - European Geosciences Union, General Assembly 2010 CY - Vienna, Austria DA - 2010-05-02 PY - 2010 AN - OPUS4-21541 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Niederleithinger, Ernst A1 - Kruschwitz, Sabine A1 - Martin, Tina A1 - Trela, Christiane T1 - Geophysical investigation of tailings dams - the TAILSAFE challenge JF - Land Contamination & Reclamation N2 - One of the main problems in the assessment of the operability, stability and contamination potential of tailings facilities is the lack of data on subsurface materials, properties and structures. One key task in the use of geophysics is the selection of the proper methods for a given site/problem combination. Interpretation of the acquired and processed physical data (e.g. electrical resistivity distribution) into something useful for site assessment (e.g. contamination distribution) is another. In the TAILSAFE project (funded by the European Commission) we have worked with partners on the use of geophysics for tailings facilities inspection. DC and complex resistivity, ground penetrating radar, and spectral analysis of surface waves and multichannel analysis of surface waves have been used on dams and beaches. In most cases, our methods provided useful information on the subsurface structure, but the translation of geophysical values into geotechnical or other parameters is still challenging. KW - Geophysics KW - Geoelectrics KW - Ground penetrating radar KW - Spectral analysis of surface waves KW - Tailings PY - 2007 SN - 0967-0513 VL - 15 IS - 2 SP - 157 EP - 162 PB - EPP Publ. CY - Richmond AN - OPUS4-25080 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Rosner, Martin A1 - Vogl, Jochen T1 - Bor: Isotopenverhältnisse und die Herkunft einer Probe JF - Nachrichten aus der Chemie N2 - Die Industrie nutzt die Borisotopenanalytik in nukleartechnischen Anwendungen. Umwelt- und Geowissenschaften identifizieren anhand der Borisotopenverhältnisse Kontaminationsquellen und charakterisieren Mischungs- und Fraktionsprozesse. In der Lebensmittelanalytik dient der Parameter dazu, Herkunft und Anbauweise von Obst und Gemüse herauszufinden. Seit kurzem gibt es dafür ein validiertes Verfahren und erste Referenzdaten. KW - Isotopenverhältnisse KW - Herkunft KW - TIMS PY - 2012 SN - 1439-9598 SN - 1521-3854 VL - 60 IS - 2 SP - 147 EP - 149 PB - Wiley-VCH Verl. CY - Weinheim AN - OPUS4-25575 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Rosner, Martin A1 - Vogl, Jochen A1 - Meixner, A. A1 - Kasemann, S. A1 - Noordmann, J. A1 - Rienitz, O. A1 - Schuessler, J. A1 - Kraft, R. A1 - Rabb, S. A1 - Vocke, R. T1 - Intercomparison of delta26Mg Values in Mg Isotope RMs and Standards N2 - Accurate measurements of stable isotope abundance ratio variations are often reported using artifact based delta-scales, which rely on suitable isotopic reference materials (iRM) for their realization. For example, variations in the 26Mg/24Mg isotope abundance ratio in natural systems are typically reported as delta26Mg values that represents the relative difference between the 26Mg/24Mg ratio measured in a sample relative to its measurement preferably in an iRM. In the past, such delta26Mg measurements were referenced to NIST SRM 980, the initial zero of the delta26Mg scale. With the development of MC-ICPMS, the detection of small but measurable isotopic differences in different chips of SRM 980 became apparent. It was then replaced by a Mg solution (DSM3), the new zero of the delta26Mg scale. A potential replacement iRM for DSM3 has been developed, ERM-AE143. This iRM has also been measured for its absolute isotope amount ratios1,2 making it traceable to the SI. The results of an delta26Mg intercomparison experiment include the Mg iRMs SRM 980, IRMM-009, ERM-AE143, AE144, AE145 standards DSM3 and Cambridge-1. The intercomparison involved 5 expert laboratories, consisting of 3 national metrological institutes (BAM, NIST, PTB) and 2 scientific research laboratories (GFZ Potsdam, UBremen). The iRMs were measured relative to AE143 and cover a range of ≈5 ‰ in delta26Mg. IRMM-009 has the lowest delta26Mg value while DSM3 has the highest, spanning a range in values that covers natural Mg isotope variations. The 2SD reproducibilities of the individual values from the different laboratories range from 0.02 to 0.26 ‰. The mean delta26Mg values, calculated from the laboratory means however show 2SD reproducibilities varing between 0.025 and 0.093 ‰. Propagated measurement uncertainties suggest a standard uncertainty of about 0.1‰ for delta26Mg determinations. T2 - Goldschmidt 2017 CY - Paris, France DA - 13.08.2017 KW - Magnesium delta value KW - Isotope reference material KW - Intercalibration KW - Magnesium isotope ratio PY - 2017 AN - OPUS4-44639 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Becker, Ben A1 - Mair, Georg A1 - Schoppa, Andre A1 - Duffner, Eric A1 - Szczepaniak, Mariusz A1 - Klauke, Andre A1 - Lenz, Stefan A1 - Lehr, Christian A1 - Hoffmann, Martin A1 - Gregor, Christian ED - Mair, Georg T1 - CryoCode: Kryodruck Tanksystem und Betankung – Validierung bis zum Normierungsvorschlag N2 - Entwicklung und Validierung eines Kryodruck-Tanksystems für Wasserstoff-Fahrzeuge. Darstellung der Versuchsergebnisse und des Normierungsvorschlags. KW - Kryodruck KW - Wasserstoff KW - Druckbehälter KW - Composite KW - Normierungsvorschlag PY - 2017 SP - 1 EP - 56 AN - OPUS4-40714 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg A1 - Hoffmann, Martin T1 - Regulations and research on RC&S for hydrogen storage relevant to transport and vehicle issues with special focus on composite containments JF - International journal of hydrogen energy N2 - Developers interested in high pressure storage of hydrogen for mobile use increasingly rely on composite cylinders for onboard storage or transport of dangerous goods. Thus, composite materials and systems deserve special consideration. History gives interesting background information important to the understanding of the current situation as to regulations, codes and standards. Based on this review, origins of different regulations for the storage of hydrogen as dangerous good and as propellant for vehicles will be examined. Both categories started out using steel and sometimes aluminium as cylinder material. With composite materials becoming more common, a new problem emerged: vital input for regulations on composite pressure systems was initially derived from decades of experience with steel cylinders. As a result, both regulatory fields suffer somewhat from this common basis. Only recent developments regarding requirements for composite cylinders have begun to go more and more separate ways. Thus these differences lead to some shortcomings in regulation with respect to composite storage systems. In principle, in spite of separate development, these deficits are in both applications very much the same: there are uncertainties in the prediction of safe service life, in retesting procedures of composite cylinders and in their intervals. Hence, different aspects of uncertainties and relevant approaches to solutions will be explained. KW - Regulations KW - Hydrogen storage KW - Composite cylinders KW - Safety KW - Slow burst test KW - Cycle fatigue sensitivity PY - 2014 DO - https://doi.org/10.1016/j.ijhydene.2013.08.141 SN - 0360-3199 VL - 39 IS - 11 SP - 6132 EP - 6145 PB - Elsevier CY - Oxford AN - OPUS4-29218 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg A1 - Hoffmann, Martin T1 - Baumusterprüfung von Composite-Druckgefäßen - Probabilistische Betrachtung der Mindestberstdruckforderung nach Norm JF - Technische Sicherheit N2 - Die Methoden der Sicherheitsbeurteilung von Druckgefäße aus Verbundwerkstoffen werden zunehmend verfeinert, um Material und damit auch Kosten sparen zu können. So steht auch der Mindestberstdruck als eine der Basisforderungen in den relevanten Normen in der Diskussion. Im Beitrag wird dargestellt, wie die Anforderungen nach Norm unter Berücksichtigung der realen Streuung der Festigkeitseigenschaften nach dem Kriterium einer Mindestzuverlässigkeit prinzipiell zu bewerten sind. Im Ergebnis wird abgeleitet, dass eine quantitative Reduzierung bei Beibehaltung des Charakters der Anforderung sicherheitstechnisch bedenklich ist. Der Ansatz, die Sicherheit von Composite-Druckgefäßen nach dem Kriterium eines Mindestberstdrucks anhand einzelner Prüfmustern nachzuweisen, ist weder eine notwendige noch eine hinreichende Bedingung für ein sicheres Baumuster. Das Potenzial zur Materialeinsparung kann nur durch Umstellung der Sicherheitsnachweise auf ein probabilistisches Verfahren genutzt werden. KW - Faserverbundwerkstoffe KW - Druckgefäße KW - Restfestigkeit KW - Degradation KW - Mindestberstdruck KW - Langsame Berstprüfung KW - Überlebenswahrscheinlichkeit KW - Probabilistischer Ansatz KW - Rechtsvorschriften PY - 2013 SN - 2191-0073 VL - 3 IS - 11/12 SP - 48 EP - 54 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-28909 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg A1 - Pöschko, Pascal A1 - Hoffmann, Martin A1 - Schoppa, André A1 - Spode, Manfred T1 - Betrachtung von Grenzwerten der Restfestigkeit von Composite-Druckgefäßen - Teil 1: Kriterien der hydraulischen Lastwechselprüfung JF - techn N2 - Die aktuelle Praxis, auch die wiederkehrende Prüfung von Druckgefäßen aus Verbundwerkstoffen primär auf die hydraulische Innendruckprüfung abzustellen, ist sowohl bezüglich der Schädigung der Prüfmuster als auch ihrer Aussagekraft als kritisch zu bewerten. Die Bundesanstalt für Materialforschung und -prüfung BAM bringt daher bei der Zulassung von Prüffristen für Composite-Druckgefäße von mehr als fünf Jahren zur Absicherung einen neuen Ansatz zur Anwendung. Er ermöglicht eine Zustandsbeschreibung der Population eines Baumusters auf der Basis wiederholt betriebsbegleitend zerstörender Prüfungen. Nachfolgend wird erläutert, wie die statistische Auswertung von Stichproben und deren perspektivische Extrapolation erfolgen und wie Zuverlässigkeitsgrenzwerte von der Größe von Druckgefäßen abhängig gemacht werden können, sowie welchen Einfluss der reale Gasdruck auf die Sicherheitsbewertung im Rahmen des Ansatzes der BAM hat. Insbesondere wird in das zentrale Arbeitsdiagramm des Ansatzes eingeführt und erläutert, wie dieses verwendet werden kann. Hierzu wird auch ausgeführt, wie die Füllzyklenzahl und die Lastwechselfestigkeit über die neu eingeführte Größe der spezifischen Füllempfindlichkeit zusammenhängen. KW - Restfestigkeiten KW - Degradation KW - Betriebssicherheit KW - Hydraulische Lastwechselprüfung KW - Streuung KW - Ausfallwahrscheinlichkeit KW - Lastwechselempfindlichkeit PY - 2012 SN - 2191-0073 VL - 2 IS - 7/8 SP - 30 EP - 38 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-26199 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg A1 - Hoffmann, Martin A1 - Scherer, Florian T1 - Type approval of composite gas cylinders - Probabilistic analysis of rc&s concerning minimum burst pressure T2 - EHEC 2014 - European hydrogen energy conference (Proceedings) T2 - EHEC 2014 - European hydrogen energy conference CY - Seville, Spain DA - 2014-03-12 KW - Composite cylinders KW - Cost optimisation KW - Hydraulic cycle testing KW - Residual strength KW - Safety KW - Scatter KW - Slow burst KW - Pressure rate KW - Sustained load PY - 2014 SP - HS2-6, 242-244 AN - OPUS4-30739 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, Simon A1 - Jurtz, N. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Flow chemistry using benchtop NMR instruments - Current approaches, chances and limitations N2 - Intensified continuous processes are in focus of current research. Compared to traditional batch processes, intensified continuous production allows the synthesis of new and difficult producible compounds with better product uniformity and reduced consumption of raw materials and energy. Flexible (modular) chemical plants can produce various products using the same equipment with short down-times between campaigns, and quick introduction of new products to the market. Consequently, the demand for powerful Process Analytical Technologies, which can monitor key variables like component concentrations in real-time, is increasing. Low-Field NMR spectroscopy presents itself as such an upcoming smart sensor1,2 (as addressed, e.g., in the CONSENS project3,4). Continuous measurement approaches can usually be differed in On- or In-line which both have advantages and drawbacks. On the one hand On-line measurements are easy to integrate even in existing setups through bypass systems, on the other hand issues like the representativity of the sampling must be considered. In the case of Inline analysis, where the whole fluid stream is analyzed, this issue can be avoided. Nevertheless, homogeneity of the mixture must be assured using NMR spectroscopy. This talk shall give a brief summary of current Online and Inline Low-Field NMR approaches. Furthermore, current research results using a tailor-made flow cell for inline analysis are shown pointing out the working range as well as limitations of these method in combination with NMR spectroscopy. T2 - 13. Interdisziplinäres Doktorandenseminar Berlin CY - Berlin, Germany DA - 18.03.2019 KW - NMR KW - Flow Chemistry KW - Inline KW - PAT KW - Benchtop NMR PY - 2019 N1 - Geburtsname von Bornemann-Pfeiffer, Martin: Bornemann, M. - Birth name of Bornemann-Pfeiffer, Martin: Bornemann, M. AN - OPUS4-47567 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Neumann, Martin T1 - Measures for quality and ageing management for non-competent authority approved package designs for the transport of radioactive material T2 - BAM dangerous goods procedural rules N2 - The BAM-GGR 016 explains the requirements of ADR, RID, ADN and IMDG for management systems for design, manufacturing, testing, documentation, use, maintenance, and inspection of packagings for package designs for the transport of radioactive material not requiring competent authority approval for all designs of exempted packages, packages type IP-1, IP-2, IP-3 and type A. KW - Transport KW - Not requiring competent authority approval KW - Radioactive material PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-597214 VL - BAM-GGR 016 SP - 1 EP - 25 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin ET - Revision 1 AN - OPUS4-59721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, Simon A1 - Jurtz, N. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Accelerating Chemical Process Development and Manufacturing – Design and Validation of an Integrated NMR Micro Mixer N2 - The future competitiveness of the process industry and their providers depends on its ability to deliver high quality and high value products at competitive prices in a sus-tainable fashion, and to adapt quickly to changing customer needs. The transition of process industry due to the mounting digitalization of technical devices and their pro-vided data used in chemical plants proceeds. Though, the detailed characteristics and consequences for the whole chemical and pharmaceutical industry are still unfore-seeable, new potentials arise as well as questions regarding the implementation. As the digitalization gains pace fundamental subjects like the standardization of device interfaces or organization of automation systems must be answered. Still, process in-dustry lack of sufficient system and development concepts with commercial advantage from this trend. Compared to traditional batch processes, intensified continuous production allows new and difficult to produce compounds with better product uniformity and reduced consumption of raw materials and energy. Flexible (modular) chemical plants can pro-duce various products using the same equipment with short down-times between campaigns, and quick introduction of new products to the market. Full automation is a prerequisite to realize such benefits of intensified continuous plants. In continuous flow processes, continuous, automated measurements and closed-loop control of the product quality are required. Consequently, the demand for smart sensors, which can monitor key variables like component concentrations in real-time, is increasing. Low-Field NMR spectroscopy presents itself as such an upcoming smart sensor1,2 (as addressed, e.g., in the CONSENS project3). Systems utilizing such an online NMR analyzer benefits through short development and set-up times when applied to modular production plants starting from a desired chemical reaction3. As an example for such a modular process unit, we present the design and validation of an integrated NMR micro mixer based on computational mod-elling suited for a desired chemical reaction. This method includes a proper design of a continuous reactor, which is optimized through computational fluid dynamics (CFD) for the demands of the NMR sensor as well as for the given reaction conditions. The system was validated with a chemical reaction process. References: [1] M. V. Gomez et al., Beilstein J. Org. Chem. 2017, 13, 285-300 [2] K. Meyer et al., Trends Anal. Chem. 2016, 83, 39-52 [3] S. Kern et al., Anal Bioanal Chem. 2018, 410, 3349-3360 T2 - Kolloquium Arbeitskreis Prozessanalytik CY - Hannover, Germany DA - 03.12.2018 KW - NMR KW - Reaction Monitoring KW - Digital Twin KW - Flow Chemistry KW - Process Analytical Technology PY - 2018 N1 - Geburtsname von Bornemann-Pfeiffer, Martin: Bornemann, M. - Birth name of Bornemann-Pfeiffer, Martin: Bornemann, M. AN - OPUS4-46972 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, Simon A1 - Jurtz, N. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Accelerating chemical process development and manufacturing – Design and validation of an integrated NMR micro mixer N2 - The future competitiveness of the process industry and their providers depends on its ability to deliver high quality and high value products at competitive prices in a sustainable fashion, and to adapt quickly to changing customer needs. The transition of process industry due to the mounting digitalization of technical devices and their provided data used in chemical plants proceeds. Though, the detailed characteristics and consequences for the whole chemical and pharmaceutical industry are still unforeseeable, new potentials arise as well as questions regarding the implementation. As the digitalization gains pace fundamental subjects like the standardization of device interfaces or organization of automation systems must be answered. Still, process industry lack of sufficient system and development concepts with commercial advantage from this trend. Intensified continuous processes are in focus of current research. Compared to traditional batch processes, intensified continuous production allows new and difficult to produce compounds with better product uniformity and reduced consumption of raw materials and energy. Flexible (modular) chemical plants can produce various products using the same equipment with short down-times between campaigns, and quick introduction of new products to the market. Full automation is a prerequisite to realize such benefits of intensified continuous plants. In continuous flow processes, continuous, automated measurements and closed-loop control of the product quality are required. Consequently, the demand for smart sensors, which can monitor key variables like component concentrations in real-time, is increasing. Low-Field NMR spectroscopy presents itself as such an upcoming smart sensor (as addressed, e.g., in the CONSENS project – http://www.consens-spire.eu/). Systems utilizing such an online NMR analyzer benefits through short development and set-up times when applied to modular production plants starting from a desired chemical reaction. As an example for such a modular process unit, we present the design and validation of an integrated NMR micro mixer based on computational modelling suited for a desired chemical reaction. This method includes a proper design of a continuous reactor, which is optimized through computational fluid dynamics (CFD) for the demands of the NMR sensor as well as for the given reaction conditions. The system was validated with a chemical reaction process. T2 - ProcessNet PAAT Jahrestreffen CY - Cologne, Germany DA - 12.11.2018 KW - NMR KW - Reaction monitoring KW - Digital twin KW - Flow chemistry KW - Process analytical technology PY - 2018 N1 - Geburtsname von Bornemann-Pfeiffer, Martin: Bornemann, M. - Birth name of Bornemann-Pfeiffer, Martin: Bornemann, M. AN - OPUS4-46579 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, Simon A1 - Jurtz, N. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Design and validation of an integrated NMR micro mixer N2 - Intensified continuous processes are in focus of current research. Compared to traditional batch processes, intensified continuous production allows the synthesis of new and difficult producible compounds with better product uniformity and reduced consumption of raw materials and energy. Flexible (modular) chemical plants can produce various products using the same equipment with short down-times between campaigns, and quick introduction of new products to the market. Full automation is a prerequisite to realize such benefits of intensified continuous plants. In continuous flow processes, continuous, automated measurements and closed-loop control of the product quality are required. Consequently, the demand for smart sensors, which can monitor key variables like component concentrations in real-time, is increasing. Low-Field NMR spectroscopy presents itself as such an upcoming smart sensor (as addressed, e.g., in the CONSENS project1,2). Systems utilizing such an online NMR analyzer benefits through short development and set-up times when applied to modular production plants starting from a desired chemical reaction. As an example for such a modular process unit, we present the design and validation of an integrated NMR micro mixer based on computational modelling suited for a desired chemical reaction. This method includes a proper design of a continuous reactor, which is optimized through computational fluid dynamics (CFD) for the demands of the NMR sensor as well as for the given reaction conditions. The system was validated with a chemical reaction process. T2 - NMRPM Konferenz 2019 CY - Kaiserslautern, Germany DA - 31.01.2019 KW - NMR KW - Mikromischer KW - Flow Chemie KW - Reaktionsmonitoring PY - 2019 N1 - Geburtsname von Bornemann-Pfeiffer, Martin: Bornemann, M. - Birth name of Bornemann-Pfeiffer, Martin: Bornemann, M. AN - OPUS4-47334 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kern, Simon A1 - Liehr, Sascha A1 - Wander, Lukas A1 - Bornemann-Pfeiffer, Martin A1 - Müller, S. A1 - Maiwald, Michael A1 - Kowarik, Stefan T1 - Training data of quantitative online NMR spectroscopy for artificial neural networks N2 - Data set of low-field NMR spectra of continuous synthesis of nitro-4’-methyldiphenylamine (MNDPA). 1H spectra (43 MHz) were recorded as single scans. Two different approaches for the generation of artificial neural networks training data for the prediction of reactant concentrations were used: (i) Training data based on combinations of measured pure component spectra and (ii) Training data based on a spectral model. Synthetic low-field NMR spectra First 4 columns in MAT-files represent component areas of each reactant within the synthetic mixture spectrum. Xi (“pure component spectra dataset”) Xii (“spectral model dataset”) Experimental low-field NMR spectra from MNDPA-Synthesis This data set represents low-field NMR-spectra recorded during continuous synthesis of nitro-4’-methyldiphenylamine (MNDPA). Reference values from high-field NMR results are included. KW - NMR spectroscopy KW - Real-time process monitoring KW - Artificial neural networks KW - Online NMR spectroscopy KW - Automation KW - Process industry PY - 2020 DO - https://doi.org/10.5281/zenodo.3677139 PB - Zenodo CY - Geneva AN - OPUS4-50456 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, S. A1 - Wander, L. A1 - Meyer, Klas A1 - Maiwald, Michael T1 - Modular production involving benchtop NMR Current Application Examples Driven by Digitalization N2 - The demand for increasing product diversity in the chemical and pharmaceutical industry calls for new production processes that enable greater flexibility. Therefore, plants are needed which can be adapted to new processes in a fast manner and be scaled up and down easily to volatile market demands. Modular production techniques in combination with advanced process analytical technology (PAT) are considered as a promising solution able to fulfil these requirements. The success and acceptance of modular concepts in both new and existing plants is dependent of its reliability, easy applicability, and standardization. In recent past, enormous efforts were made to overcome existing barriers in a superordinate level, e.g. DEXPI, ENPRO, or MTP naming just a few. Here, we’d like to present a few, more hands-on, application examples which are shown in Figure 1 aiming to increase process flexibility and applicability. T2 - ProcessNET Jahrestagung 2022 Aachen CY - Aachen, Germany DA - 12.09.2022 KW - Process analytical technology KW - NMR spectroscopy KW - Digitization KW - Additive manufacturing PY - 2022 AN - OPUS4-55975 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, S. A1 - Wander, L. A1 - Meyer, Klas A1 - Maiwald, Michael T1 - Modular production involving benchtop NMR Current Application Examples Driven by Digitalization N2 - The demand for increasing product diversity in the chemical and pharmaceutical industry calls for new production processes that enable greater flexibility. Therefore, plants are needed which can be adapted to new processes in a fast manner and be scaled up and down easily to volatile market demands. Modular production techniques in combination with advanced process analytical technology (PAT) are considered as a promising solution able to fulfil these requirements. The success and acceptance of modular concepts in both new and existing plants is dependent of its reliability, easy applicability, and standardization. In recent past, enormous efforts were made to overcome existing barriers in a superordinate level, e.g. DEXPI, ENPRO, or MTP naming just a few. Here, we’d like to present a few, more hands-on, application examples which are shown in Figure 1 aiming to increase process flexibility and applicability. T2 - Achema 2022 CY - Frankfurt a.M., Germany DA - 22.08.2022 KW - Process analytical technology KW - NMR spectroscopy KW - Digitization PY - 2022 AN - OPUS4-55974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Martin A1 - Gröke, Carsten A1 - Wille, Frank T1 - BAM-GGR 016 - Auf dem aktuelle Stand JF - Gefahrgut N2 - Die BAM-GGR 016 zur Anerkennung und Überwachung von Managementsystemen für nicht zulassungspflichtige Verssandstücke für radioaktive Stoffe wurde kürzliche erstmals revidiert. KW - BAM-GGR 016 KW - Überwachung KW - Anerkennung KW - Radioaktive Stoffe PY - 2024 SN - 0944-6117 IS - 5 SP - 11 EP - 13 PB - Verlag Heinrich Vogel CY - München AN - OPUS4-59998 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Eisenacher, Germar A1 - Scheidemann, Robert A1 - Neumann, Martin A1 - Sterthaus, Jens A1 - Kasparek, Eva Maria A1 - Völzke, Holger T1 - Stauchversuche mit querdehnungsbehinderten Fichtenholzproben verschiedener Faserorientierungen bei veränderlicher Dehnrate T1 - Compression tests with laterally constrained spruce specimens with varying fiber orientations and loading rates T2 - KONTEC 2011 - 10. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle" (Proceedings) N2 - Im Zuge des Forschungsvorhabens ENREA (Entwicklung rechnerischer Analysemethoden für stoßdämpfende Strukturen beim Anprall oder Absturz von Abfallgebinden) führt die BAM systematische Untersuchungen an stoßdämpfenden Werkstoffen, unter anderem an Fichtenholz, durch. Zweck der mit diesen Untersuchungen erzeugten Datenbasis ist die Erstellung und Parametrierung eines Finite-Elemente- (FE-) Materialmodells, das die Modellierung holzgefüllter stoßdämpfender Bauteile von Transportbehältern für radioaktive Stoffe in der FE-Simulation ermöglichen soll. Anhand von Ergebnissen aus der ersten Versuchsphase werden der Einfluss der Dehnrate und der Faserorientierung auf das Kraft-Verformungs-Verhalten von Fichtenholz diskutiert. Anschließend wird die rechnerische Modellierung von Fichtenholz diskutiert und die Anforderungen an ein Materialmodell werden erläutert. N2 - In the course of research project ENREA (development of numerical methods for analyzing impact limiters subjected to impact or drop scenarios), BAM is systematically investigating impact limiting materials, e. g. spruce wood. Goal of these investigations is to establish and parameterize a finite element (FE) material model which enables the modeling of wood filled impact limiting devices of transport casks for radioactive materials. Using results of the first test stage, the effect of loading rate and fiber orientation on the force-deflection characteristics of spruce wood will be presented. Following, computational modeling of spruce wood including requirements for a material model will be discussed. T2 - KONTEC 2011 - 10. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle" CY - Dresden, Germany DA - 06.04.2011 PY - 2011 N1 - Sprachen: Deutsch/Englisch - Languages: German/English SP - 465 EP - 478 AN - OPUS4-23684 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Mair, Georg A1 - Hoffmann, Martin A1 - Schönfelder, Thorsten ED - Carcassi, M.N. T1 - The slow burst testing of composite cylinders - Part I: Slow burst testing of samples as a method for quantification of cylinder degradation T2 - ICHS2013 - 5th International conference on hydrogen safety (Proceedings) N2 - The current practise of focusing the periodic retesting of composite cylinders primarily on the hydraulic pressure test has to be evaluated as critical - with regard to the damage of the specimen as well as in Terms of their significance. This is justified by micro damages caused to the specimen by the test itself and by a lack of informative values. Thus BAM Federal Institute of Materials Research and Testing (Germany) uses a new approach of validation of composite for the determination of re-test periods. It enables the description of the state of a population of composite cylinders based on destructive tests parallel to operation. An essential aspect of this approach is the prediction of residual safe service life. In cases where it cannot be estimated by means of hydraulic load cycle tests, as a replacement the creep or burst test remains. As a combination of these two test procedures BAM suggests the 'slow burst test SBT'. On this a variety of about 150 burst test results on three design types of cylinders with plastic liners are presented. For this purpose both, the parameters of the test protocol as well as the nature and intensity of the pre-damage artificially aged test samples are analysed statistically. This leads first to an evaluation of the different types of artificial ageing but also to the clear recommendation that conventional burst tests be substituted totally if indented for assessment of composite pressure receptacles. T2 - ICHS2013 - 5th International conference on hydrogen safety CY - Brussels, Belgium DA - 09.09.2013 KW - Residual strength KW - CFRP KW - Gas storage KW - Reliability KW - Sample testing PY - 2013 SN - 978-2-9601366-0-9 SP - 1 EP - 12 AN - OPUS4-29260 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bletzer, Claus Wilhelm A1 - Nehrig, Marko A1 - Feldkamp, Martin A1 - Wille, Frank A1 - Völzke, Holger T1 - Pressure build up in casks containing wet waste T2 - KONTEC 2013 - 11. Internationales Symposium 'Konditionierung radioaktiverBetriebs- und Stilllegungsabfälle' (Proceedings) T2 - KONTEC 2013 - 11. Internationales Symposium 'Konditionierung radioaktiverBetriebs- und Stilllegungsabfälle' CY - Dresden, Germany DA - 2013-03-13 KW - Pressure build up KW - Radioactive waste KW - Disposal PY - 2013 IS - Sektion 4 / Vortrag 031 SP - 1 EP - 10(?) AN - OPUS4-28095 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vogl, Jochen A1 - Rosner, Martin A1 - Pritzkow, Wolfgang T1 - Development and validation of a single collector SF-ICPMS procedure for the determination of boron isotope ratios in water and food samples JF - Journal of analytical atomic spectrometry N2 - Boron isotope studies on technical materials and geological and environmental samples are one hot topic in nowadays isotope research. Provenance studies of artefacts, food and other products might become another one, as several recent studies demonstrate. Typically boron isotope determinations have been carried out by TIMS. To open up this research field to a broader scientific community we developed two analytical procedures for boron isotope determinations based on single collector SF-ICPMS combined with a sample preparation procedure consisting of dry-ashing and a three step ion chromatographic boron-matrix separation. The developed procedures consist of one low resolution (LR) and one medium resolution (MR) procedure. The repeatability for the δ11B determination in three independently measured aliquots lies between 0.2 and 0.8‰ for the LR procedure and between 0.3 and 1.5‰ for the MR procedure. The expanded uncertainties with a coverage factor of k=2 range between 1.4 and 1.6‰ for the LR procedure and between 2.9 and 3.2‰ for the MR procedure. The accuracy, expressed as average deviation from the reference values, is 0.43‰ for the LR procedure and 0.33‰ for the MR procedure. To test the practicability of the procedures the matrix tolerance has been investigated as well and was found to be up to 2 mg kg-1 of alkaline and alkaline earth elements in the final measurement solution containing 100 µg kg-1 boron. Thus a highly efficient matrix separation for SF-ICPMS boron isotope determinations is required, similar to TIMS. PY - 2011 DO - https://doi.org/10.1039/c0ja00220h SN - 0267-9477 SN - 1364-5544 VL - 26 IS - 4 SP - 861 EP - 869 PB - Royal Society of Chemistry CY - London AN - OPUS4-23419 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Grelle, Tobias A1 - Jaunich, Matthias A1 - Probst, Ulrich A1 - Wolff, Dietmar A1 - Kömmling, Anja A1 - Zencker, Uwe A1 - Orellana Pérez, Teresa A1 - Völzke, Holger A1 - Wille, Frank T1 - Ongoing research & development about metal and elastomer seals at BAM N2 - Packages for the transport and storage of radioactive materials are often sealed with elastomer or metal seals. These seals are basic components to meet the leak tightness criteria for these kind of packages. An overview over ongoing research and development concerning metal and elastomer seals is given in the presentation. Introductions in the fundamental functionality of elastomer and metal seals are presented. Ageing processes are shown for both components regarding to different ageing effects. T2 - IRSN Conference on Safe Transport of Radioactive Material CY - Fontenay aux Roses, France DA - 13.11.2018 KW - Seal KW - Seals KW - Metal seal KW - Elastomer seal KW - Long term investigation KW - Helical spring KW - Aluminum seal KW - Silver seal KW - Component test KW - Useable resilience KW - Leakage rate KW - Compression set KW - Low temperature investigation KW - Ageing KW - Radioactive KW - Transport KW - Storage KW - IAEA PY - 2018 AN - OPUS4-46881 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bernardy, Christopher A1 - Habib, Abdel Karim A1 - Kluge, Martin A1 - Schalau, Bernd A1 - Kant, Hanjo A1 - Schulze, Marcel A1 - Orchini, Alessandro T1 - Sicherheitstechnische Untersuchungen von Wasserstoff Freistrahlflammen bei Hochdruck im Realmaßstab T2 - Konferenzband Magdeburg-Köthener Brandschutz- und Sicherheitstagung 2024 N2 - Wasserstoff als Energieträger gewinnt zunehmend an Bedeutung. Die Untersuchung von Störfallauswirkungen mit Wasserstoff rückt somit stärker in den Fokus. Da Wasserstoff meist unter Druck gelagert und transportiert wird, ist ein zu betrachtendes Szenario die Freisetzung aus einer Leckage mit anschließender Zündung. Die daraus resultierende Freistrahlflamme (Jet Flame) muss hinsichtlich der in die Umgebung emittierten Wärmestrahlung charakterisiert werden. In der Literatur existieren bereits verschiedene Modelle, welche jedoch vermehrt auf Daten aus Kohlenwasserstoffflammen mit geringem Impuls basieren. Zur Überprüfung dieser Modelle wird im Zuge des BAM internen H2 Jet Flame Projektes die sicherheitstechnische Untersuchung von impulsbehafteten Wasserstoff Freistrahlflammen vorgenommen. Hierfür finden Versuche im Realmaßstab auf dem Testgelände Technische Sicherheit der BAM (BAM-TTS) statt. Gegenstand der Untersuchungen ist die Beurteilung der Auswirkungen von realistischen Freisetzungsszenarien hinsichtlich der Flammengeometrie und der freigesetzten Wärmestrahlung. Dabei werden Parameter wie Freisetzungswinkel, Leckagedurchmesser (z.Zt. 1 mm bis 10 mm), Druck (z.Zt. bis max. 250 bar) und Massenstrom (bis max. 0,5 kg/s) variiert. Zusätzlich können auch Einflüsse wie Art der Zündung, Zündort sowie Zündung mit zeitlichem Verzug untersucht werden. Gewonnene Erkenntnisse werden mit den Ergebnissen bereits vorhandener Modelle verglichen und diese im Bedarfsfall weiterentwickelt. Insbesondere wird der Fokus auf die Modellierung der freigesetzten Wärmestrahlung von Wasserstoffflammen gelegt. Herausforderung dabei stellt die IR-Vermessung und Modellierung von Sichtmodellen der Flammen dar. Die Visualisierung der Flammengeometrie wird mit Hilfe mehrerer Infrarot Kamerasystemen (aus mindestens zwei Blickwinkeln) vorgenommen. Bisherige Messungen, die in der Literatur zu finden sind, basieren meist auf instationären Auströmbedingungen. Der hier verwendete Versuchsaufbau ermöglicht ein stationäres Ausströmen für mehrere Minuten und somit eine direkte Vergleichbarkeit mit den existierenden (stationären) Modellen. Weiterhin ist der Versuchsstand umrüstbar für Vergleichsmessungen mit Kohlenwasserstoffen (Methan etc.) sowie Mischungen aus Wasserstoff und Kohlenwasserstoffen. T2 - Magdeburg-Köthener Brandschutz- und Sicherheitstagung 2024 CY - Magdeburg, Germany DA - 14.03.2024 KW - Wärmestrahlung KW - Wassersoff KW - Freistrahlflamme PY - 2024 SN - 978-3-948749-42-2 SP - 137 EP - 146 CY - Magdeburg AN - OPUS4-59912 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bernardy, Christopher A1 - Habib, Abdel Karim A1 - Kluge, Martin A1 - Schalau, Bernd A1 - Kant, Hanjo A1 - Schulze, Marcel A1 - Orchini, Alessandro ED - Nabizada, A. ED - Dechany, A. ED - B. Carré, B. ED - Stendardo, E. ED - Lappa, F. ED - Vanlaere, J. ED - Mendoza, M.J. ED - Dejonghe, M. ED - Daese, M. ED - Namazifard, N. ED - Jacops, R. ED - Jottrand, S. ED - Pahlavan, S. T1 - Real scale safety investigations of hydrogen jet flames at high pressure T2 - EPHyC2024: European PhD Hydrogen Conference, Book of Abstracts N2 - In order to reduce the human footprint of CO2 emissions and limit global warming effects hydrogen combustion is becoming increasingly important. To enable fuel cells and gas turbines to operates this carbon free fuel, unprecedently large amounts of hydrogen need to be produced and safely transported and stored. The investigation of the effects of accidents involving hydrogen is therefore becoming of outmost importance. Since hydrogen is usually stored and transported under pressure, one scenario to be considered is the release of hydrogen from a leakage with subsequent ignition. The resulting jet flame must be characterized with respect to the thermal radiation emitted into the environment to define safety regulations. Various models that characterize the resulting flame shape and radiation already exist in the literature, but these are mainly based on empirical data from hydrocarbon jet flames.[1-4] To verify these models, a H2 Jet Flame project conducted at BAM, is investigating the safety of momentum driven hydrogen jet flames. For this purpose, large-scale tests are carried out at the Test Site Technical Safety (BAM-TTS). The object of the investigations is to assess the effects of real scale release scenarios regarding flame geometry and the thermal radiation emitted. Parameters such as release angle, leakage diameter (currently 1 mm to 10 mm), pressure (currently up to max. 250 bar) and mass flow (up to max. 0.5 kg/s) are varied. In addition, influences such as the type of ignition, ignition location as well as delayed ignition can also be investigated. The gained knowledge will be compared with existing jet flame models, to validate these and identify a possible need for further development. In particular, the focus will be laid on the thermal radiation of hydrogen flames. The challenge here is the visualization and characterization of the flame geometry in an open environment. Visualization is performed using infrared (IR) camera systems from at least two viewing angles. Measurements of the heat radiation of jet flames, which can be found in the literature, are mostly based on unsteady outflow conditions. The experimental setup used here allows for the generation of a steady-state outflow for several minutes and thus a direct comparability with existing (steady-state) models. Furthermore, the tests can be carried out for comparative measurements with hydrocarbons (methane, etc.) as well as mixtures of hydrogen and hydrocarbons. T2 - European PhD Hydrogen Conference 2024 (EPHyC2024) CY - Gent, Belgium DA - 20.03.2024 KW - Thermal radiation KW - Release KW - Hydrogen KW - Jet flame PY - 2024 SP - 551 EP - 556 AN - OPUS4-59910 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Krüger, Simone A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Experimental investigation of consequences of LPG vehicle tank failure under fire conditions JF - Journal of Loss Prevention in the Process Industries N2 - In case of a vehicle fire, an installed LPG (liquefied petroleum gas) tank with a malfunctioning safety device poses severe hazards. To investigate the consequences in case of tank failure, we conducted 16 tests with toroidal shaped LPG vehicle tanks. Three tanks were used for a Hydraulic Burst Test under standard conditions. Another three tanks were equipped with a statutory safety device and were subjected to a gasoline pool fire. The safety device prevented tank failure, as intended. To generate a statistically valid dataset on tank failure, ten tanks without safety devices were exposed to a gasoline pool fire. Five tanks were filled to a level of 20 %; the re-maining five were filled to a level of 100 %. In order to gain information on the heating process, three tem-perature readings at the tank surface, and three nearby flame temperatures were recorded. At distances of l = (7; 9; 11) m to the tank, the overpressure of the shock wave induced by the tank failure and the unsteady tem-peratures were measured. All ten tanks failed within a time of t < 5 min in a BLEVE (boiling liquid expanding vapor explosion). Seven of these resulted directly in a catastrophic failure. The other three resulted in partial failure followed by catastrophic failure. A near field overpressure at a distance of l = 7 m of up to p = 0.27 bar was measured. All ten tests showed massive fragmentation of the tank mantle. In total, 50 fragments were found. These 50 fragments make-up 88.6 % of the original tank mass. Each fragment was georeferenced and weighed. Fragment throwing distances of l > 250 m occurred. For the tanks with a fill level of 20 %, the average number of fragments was twice as high as it was for the tanks that were filled completely. KW - Blast wave KW - BLEVE KW - Consequences KW - Explosion KW - LPG PY - 2018 UR - https://authors.elsevier.com/a/1XnFv_Ld32ewKu DO - https://doi.org/10.1016/j.jlp.2018.09.006 SN - 0950-4230 VL - 56 SP - 278 EP - 288 PB - Elsevier CY - Kidlington - Oxford AN - OPUS4-46238 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Neumann, Patrick P. A1 - Storm, Sven-Uwe A1 - Rudolph, Michael A1 - Schoppa, André A1 - Szczepaniak, Mariusz T1 - Mobile gas cylinders in fire: Consequences in case of failure T2 - Fire Safety Journal N2 - Commercial, off-the shelf propane cylinders are subjected to high safety regulations. Furthermore, those cylinders are equipped with safety devices like pressure relief valves (PRV). Despite these regulations and safety measures, a failure of the Container is possible if exposed to an intense fire. The result of this is severe hazard for users, rescue forces and infrastructure. Within the framework of a destructive test series, 15 identical propane cylinders, without pressure relief devices, were exposed to an intensive fire in horizontal Position until failure. Each cylinder was filled with a mass of m =11 kg of liquid propane. Three different fire sources were used (wood, petrol, propane). The experiments revealed the failure of all cylinders in a time period t < 155 s. The failure lead to a fragmentation into several major parts with throwing distances of up to l =262 m. In all trials, the temperature of the cylinder wall (top, side, bottom), of the liquid phase inside and of the surrounding fire (top, side, bottom) was recorded. In addition, the inner cylinder pressure and the induced overpressure of the blast wave after the failure were recorded. Overpressures of up to p=0.27 bar were recorded close to the cylinder (l =5 m). AM tests were documented hy video from several positions (general view, close-up, high-speed 5000 fps). This test series creates the basis for further experimental studies in the field of alternative fuels for vehicles. The aim of this test series is to assess and analyse the consequences of the failure of gas vessels (for LPG, CNG, CGH2) in the aftermath of severe incidents. T2 - 12th International Symposium on Fire Safety Science CY - Lund, Sweden DA - 12.06.2017 KW - Explosion KW - Gas cylinders KW - Consequences PY - 2017 DO - https://doi.org/X0.1016/j.firesaf.2017.05.006 SN - 0379-7112 VL - 91 SP - 989 EP - 996 PB - Elsevier Ltd. AN - OPUS4-43028 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Habib, Abdel Karim A1 - Askar, Enis A1 - Kohlhoff, Harald A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Szczepaniak, Mariusz T1 - Versagen von Gasbehältern für alternative Treibstoffe T2 - 14. Kolloquium zur chemischen und physikalischen Sicherheitstechnik N2 - Im Rahmen des Projekts „Complex Fires – Auswirkung von Behälterversagen“ (CoFi-ABV) sollen die Auswirkungen des Versagens von Gasbehältern für alternative Treibstoffe in Fahrzeugen unter Berücksichtigung komplexer Brand- und Explosionsszenarien untersucht werden. Es wird der aktuelle Hintergrund des Forschungsvorhabens erläutert sowie die geplanten Untersuchungen und beabsichtigten Ergebnisse vorgestellt. Hauptbestandteil des Projekts ist eine Vielzahl von zerstörenden Großversuchen. Im Vorfeld dieser Großversuche werden zur Weiterentwicklung und Adaptierung von Messtechnik Versuche im kleineren Maßstab durchgeführt. Im Folgenden werden Teile dieser Ver-suchsaufbauten im „mid-scale“ sowie die dabei verwendete Messtechnik dargestellt. Weiterhin werden erste Ergebnisse aus Wärmeeintragsversuchen zur Quantifizierung verschiedener Unterfeuerungsmethoden für die zerstörenden Großversuche vorgestellt. T2 - 14. Kolloquium zur chemischen und physikalischen Sicherheitstechnik (BAM-PTB-Kolloquium) CY - Berlin, Germany DA - 14.06.2016 KW - Explosion KW - alternative Treibstoffe KW - Behälterversagen KW - Composite PY - 2016 SN - 978-3-9817853-5-7 SN - 0938-5533 SP - 1 EP - 143 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) AN - OPUS4-37172 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Feldkamp, Martin A1 - Linnemann, Konrad A1 - Wille, Frank T1 - Transport of HLW canisters on sea vessels N2 - Germany had been transporting spent fuel to the reprocessing plant in Sellafield and La Hague for decades until around 2005. Resulting from the obligation to take back the vitrified high-level waste from reprocessing six CASTOR® HAW28M filled with 168 canisters with radioactive waste in vitrified form were transported from Sellafield to the interim storage facility Biblis in 2020. Rail wagons were used for the transport to the port in Barrow-in-Furness, where they were loaded into a dedicated seagoing vessel, certified as INF Class 3 according to the INF Code. This was the first time that vitrified high level waste with considerable heat load was transported under a German design approval certificate. BAM was involved in the authority assessment of the conditions for the sea transport. For the first transport BAM required among others, assessment of temperature distribution during transport, logging of temperatures of cargo bays and graphical imaging of temperatures of the bay with the cask in order to ensure compliance with temperature specifications, e.g. maximal neutron absorber and gasket temperatures. Special interest was taken in the identification of possible events exceeding the specified temperatures considering the different philosophies of IMDG code and its supplement INF code regarding temperature control of hatches. Results show compliance with assumed conditions. T2 - RAMTrans 2024 CY - London, GB DA - 14.05.2024 KW - Transport KW - Spent nuclear fuel KW - Ship KW - Sea KW - High level waste PY - 2024 AN - OPUS4-60091 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dey, Anika A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin A1 - Heyder, R. T1 - Erfahrungen mit der Wirbelstromprüfung beim Einsatz an unterschiedlichen Schienenstahlsorten T2 - DGZfP-Jahrestagung 2011 N2 - Die steigenden Anforderungen im Schienenverkehr haben u. a. wachsende Betriebsbeanspruchungen für das Führungselement Schiene zur Folge. Auf Strecken mit hohen Belastungen wird dadurch die Entstehung von Rollkontaktermüdungsrissen, den sog. Head Checks, begünstigt. Für die Quantifizierung von Schäden im Hinblick auf eine optimierte Instandhaltung, setzt die DB AG daher seit einigen Jahren die Wirbelstromprüfung an Schienen ein. Es wurde ein Wirbelstromprüfsystem speziell für die Detektion und Bewertung von Head Checks auf der Schienenstahlsorte R260 entwickelt. Um den Instandhaltungsaufwand möglichst gering zu halten, unterliegen Eisenbahnschienen einer ständigen technologischen Weiterentwicklung durch die Hersteller. Durch Verbesserung der Schienenstahlsorten soll ein größerer Widerstand gegen die Bildung von Rollkontaktermüdungsrissen erreicht werden. Anhand von Streckenversuchen der DB AG in den letzten Jahren konnte festgestellt werden, dass tatsächlich eine Verminderung der Risswachstumsgeschwindigkeit erzielt wurde. Dafür zeigten sich im Vergleich zur Stahlsorte R260 abweichende Rissgeometrien, geringere Abstände zwischen den Ermüdungsrissen und somit eine größere Dichte des Rissfeldes. Die daraus resultierenden Folgen für die Ergebnisse der Wirbelstromprüfung werden hier erläutert. Praktische Prüferfahrungen an Schienenstahlsorten mit höherer Festigkeit werden vorgestellt. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Schienenstahlsorten KW - Schienenfehler KW - Eisenbahnschiene PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-252793 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (Di.2.A.4) SP - 1 EP - 10 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25279 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Pohl, Rainer A1 - Thomas, Hans-Martin A1 - Casperson, Ralf T1 - Mögliche Fehlerquellen und deren Einflüsse bei der Risstiefenbestimmung mit Wirbelstrom T2 - DGZfP-Jahrestagung 2009 N2 - Mit der Wirbelstromprüfung ist die Bestimmung der Tiefe offener Risse in Metallen prinzipiell möglich und wird auch in unterschiedlichen Anwendungen durchgeführt. Hierbei haben die jeweiligen praktischen Prüfbedingungen jedoch erheblichen Einfluss auf die Qualität der Prüfaussage. Es werden einige grundlegende Effekte erläutert, die bei der Risstiefenbestimmung mit Wirbelstrom zu beachten sind. Ein spezieller Labormessplatz wird unter dem Aspekt möglicher Fehlbewertungen vorgestellt und Schlussfolgerungen für die praktische Anwendung werden gezogen. Anhand praktischer Beispiele aus der Schienenprüfung mit Wirbelstrom werden die Auswirkungen verschiedener Fehlereffekte bei der Risstiefenbestimmung gezeigt. T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 18.05.2009 KW - Head Check KW - Wirbelstromprüfung KW - Risstiefenbestimmung PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 (Di.2.B.2) SP - 1 EP - 11 AN - OPUS4-20514 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dey, Anika A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Die Wirbelstromprüfung als Hilfsmittel für die Schieneninstandhaltung T2 - Tagungsband der DGZfP-Jahrestagung 2010 - Zerstörungsfreie Materialprüfung ZfP in Forschung, Entwicklung und Anwendung N2 - Die zerstörungsfreie Oberflächenprüfung an verlegten Eisenbahnschienen mit Wirbelstrom hat in den letzten Jahren durch ständige Weiterentwicklung und Verifizierung enorm an Bedeutung gewonnen. Es wurde u.a. angestrebt zuverlässige Planungsgrößen für den Einsatz von Instandhaltungsmaßnahmen zu erhalten, durch deren gezielten Einsatz Risswachstum unterbunden werden kann. Die Ursache für das Wachstum von Rissen in der Schiene liegt in der Materialermüdung des Werkstoffes infolge der Betriebsbelastungen im RadSchiene-Kontakt. Nach einer gewissen Beanspruchungsdauer kommt es an den Kontaktflächen der Fahrkante zu einer Kaltverfestigung des Schienenstahls. Durch fortschreitende Verfestigung des kontaktbeanspruchten Oberflächenbereichs der gehärteten Schicht wird der Werkstoff spröde und es bilden sich feine Risse aus. Die Risse wachsen anfangs unter einem flachen Winkel in das Schieneninnere hinein, neigen dann aber ab einem gewissen Stadium dazu in das Innere des Schienenkopfes abzukippen, was im Extremfall zu einem Schienenbruch führen kann. Diese Rollkontaktermüdungsrisse, auch genannt Head Checks, entstehen bevorzugt in der Fahrkante von bogenäußeren Schienen. Die Anwendung der Wirbelstromprüfung an der Schiene wurde bisher zur Ermittlung der Schädigungstiefe dieser Rollkontaktermüdungsrisse eingesetzt. Das Wirbelstromverfahren besitzt die Eigenschaft, sehr empfindlich auf alle Veränderungen der Materialeigenschaften an der Oberfläche zu reagieren. Daher wurde festgestellt, dass sich neben der Detektion von Rissen auch Fehler wie Eindrückungen oder Schlupfwellen, bis hin zu Materialveränderungen durch Schweißen oder Aufhärtungen in der Schienenoberfläche bestimmen lassen. Die Wirbelstromprüfung besitzt daher das Potenzial, mögliche Orte der Entstehung von Ermüdungsrissen in einem extrem frühzeitigen Stadium nachzuweisen. Ziel ist es, die rissgefährdeten Zonen schon im Zustand der Kaltverfestigung zu identifizieren. Dadurch können sich neue Aspekte für die präventive Schieneninstandhaltung ergeben. T2 - DGZfP-Jahrestagung 2010 - Zerstörungsfreie Materialprüfung ZfP in Forschung, Entwicklung und Anwendung CY - Erfurt, Germany DA - 10.05.2010 PY - 2010 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-214813 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) CY - Berlin AN - OPUS4-21481 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Dey, Anika A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - 'Verortung' der Prüfergebnisse bei der ZfP an Eisenbahnschienen T2 - DGZfP-Jahrestagung 2011 N2 - Das Schienennetz der DB und anderer Bahngesellschaften wird regelmäßig mit Schienenprüfzügen inspiziert. Die mit den Prüfzügen aufgenommenen Messdaten werden offline zu einem späteren Zeitpunkt ausgewertet. Um Prüfbefunde manuell nachprüfen und ggf. Reparaturmaßnahmen einleiten zu können, ist eine möglichst exakte Zuordnung der Befunde zum Prüfort notwendig. Theoretisch ist jeder Ort des Schienennetzes durch Streckennummer, Richtungskennzahl und Kilometrierung exakt beschrieben. In der Praxis treten jedoch bei der Zuordnung diverse Probleme auf: Die Kilometrierung wird während der Prüfung manuell erfasst, indem die Beschriftung der Kilometer- bzw. Hektometertafeln in das Prüfsystem eingegeben und deren Position beim Vorbeifahren per Tastendruck in die Messdaten 'eingeblitzt' wird. Die Hektometertafeln stehen jedoch nicht an der aufgedruckten Position, sondern sind am nächstgelegenen Mast montiert. Dagegen ist die Ungenauigkeit des manuellen 'Einblitzens' vernachlässigbar. Außerdem ist die Kilometrierung nicht immer eindeutig, da nach Umbaumaßnahmen Kilometersprünge (sowohl fehlende als auch doppelte Kilometer) auftreten können. Abhilfe verspricht der Einsatz des satellitengestützten GPS, vorausgesetzt, die Strecken sind exakt vermessen. Um eine ausreichende Positionsgenauigkeit auch bei schlechten Empfangsbedingungen zu erreichen, ist jedoch ein erheblicher Aufwand notwendig. Die Positionsgenauigkeit eines Standard-GPS-Empfängers genügt hier nicht. Es wird ein Verortungssystem hoher Positionsgenauigkeit auf der Basis des GPS vorgestellt, das sich derzeit in der Erprobung befindet. T2 - DGZfP-Jahrestagung 2011 CY - Bremen, Germany DA - 30.05.2011 KW - Zerstörungsfreie Prüfung KW - Verortung KW - GPS PY - 2011 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-252802 SN - 978-3-940283-33-7 IS - DGZfP-BB 127 (P85) SP - 1 EP - 5 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP) AN - OPUS4-25280 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Knöppchen, Andreas A1 - Pohl, Rainer A1 - Zimne, Lutz A1 - Bode, Johannes A1 - Hollesch, Martin T1 - Manufacturing of reference defects for NDT using low-energy EDM T2 - 19th World Conference on Non-Destructive Testing 2016 N2 - For non-destructive testing (NDT) appropriate reference blocks are required in order to verify and calibrate a testing procedure. At BAM a special electric discharge machining (EDM) system has been developed which is able to manufacture artificial defects having a width down to 30 μm. Especially in the case of austenitic materials conventional EDM leads to a transformation of austenite to martensite. The martensite transformation causes a higher sensitivity of electromagnetic NDT methods (e. g. eddy current testing) at the artificial defects compared to natural defects of same size. The EDM system developed at BAM uses very low energy to avoid this material transformation. A side effect of the low-energy EDM is a lower surface roughness compared to conventional EDM. The artificial defects manufactured at BAM are measured optically and delivered with a certificate. A comparison of artificial defects shows the influence of material transformation on NDT and how differently the quality of the artificial defects can be. T2 - 19th World Conference on Non-Destructive Testing CY - Munich, Germany DA - 13.06.2016 KW - Reference defect KW - EDM KW - Electric discharge machining KW - Artificial defect PY - 2016 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-365995 SN - 978-3-940283-78-8 VL - 157 SP - 1 EP - 10 PB - German Society for Non-Destructive Testing (DGZfP e.V.) CY - Berlin, Germany AN - OPUS4-36599 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Zaghdoudi, M. A1 - Kömmling, Anja A1 - Böhning, Martin A1 - Jaunich, Matthias T1 - Ageing of elastomers in air and in hydrogen environment: A comparative study JF - International Journal of Hydrogen Energy N2 - EPDM, HNBR and FKM materials were exposed at 150 ◦C to air under atmospheric pressure and to hydrogen at 50 bar for different ageing times. All measurements after hydrogen exposure were conducted on samples in degassed condition to assess irreversible effects resulting from that exposure and to compare them to those after ageing in air. Density, hardness, tensile properties, compression set, and hydrogen permeability of all samples were analysed. In both ageing environments, HNBR exhibited the most significant changes of material properties. However, for both EPDM and HNBR, considerably less severe ageing effects were observed under hydrogen in comparison to ageing in air. On the other hand, FKM showed about the same low level of deterioration in both ageing environments but exhibited poor resistance against damage due to rapid gas decompression in hydrogen environment that can lead to seal failure. The obtained results may serve as a guidance toward a better understanding for design and utilisation of elastomeric materials in future hydrogen infrastructure components. KW - Rapid gas decompression KW - Condensed Matter Physics KW - Hydrogen KW - Sustainability and the Environment KW - Rubber sealing KW - Renewable Energy PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-597417 DO - https://doi.org/10.1016/j.ijhydene.2024.03.053 SN - 0360-3199 VL - 63 SP - 207 EP - 216 PB - Elsevier B.V. AN - OPUS4-59741 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dittmar, Stefan A1 - Ruhl, Aki S. A1 - Altmann, Korinna A1 - Jekel, Martin T1 - Settling Velocities of Small Microplastic Fragments and Fibers JF - Environmental Science & Technology N2 - There is only sparse empirical data on the settling velocity of small, non-buoyant microplastics thus far, although it is an important parameter governing their vertical transport within aquatic environments. This study reports the settling velocities of 4031 exemplary microplastic particles. Focusing on the environmentally most prevalent particle shapes, irregular microplastic fragments of four different polymer types (9–289 µm) as well as five discrete length fractions (50–600 µm) of common nylon and polyester fibers were investigated, respectively. All settling experiments were carried out in quiescent water using a specialized optical imaging setup. The method has been previously validated in order to minimize disruptive factors, e.g. thermal convection or particle interactions, and thus enable the precise measurements of the velocities of individual microplastic particles (0.003–9.094 mm/s). Based on the obtained data, ten existing models for predicting a particle’s terminal settling velocity were assessed. It is concluded that models, which were specifically deduced from empirical data on larger microplastics, fail to provide accurate predictions for small microplastics. Instead, a different approach is highlighted as a viable option for computing settling velocities across the microplastics continuum in terms of size, density and shape. KW - Microplastics KW - Microplastic fibers KW - Settling velocity KW - Sinking velocity KW - Sedimentation PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-597455 DO - https://doi.org/10.1021/acs.est.3c09602 SN - 0013-936X VL - 58 IS - 14 SP - 6359 EP - 6369 PB - American Chemical Society (ACS) AN - OPUS4-59745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Scharf, Oliver A1 - Ihle, S. A1 - Ordavo, I. A1 - Arkadiev, V. A1 - Bjeoumikhov, A. A1 - Bjeoumikhova, S. A1 - Buzanich, Günter A1 - Gubzhokov, R. A1 - Günther, A. A1 - Hartmann, R. A1 - Kühbacher, M. A1 - Lang, M. A1 - Langhoff, N. A1 - Liebel, A. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Soltau, H. A1 - Strüder, L. A1 - Thünemann, Andreas A1 - Wedell, R. T1 - Compact pnCCD-based X-ray camera with high spatial and energy resolution: a color X-ray camera JF - Analytical chemistry N2 - For many applications there is a requirement for nondestructive analytical investigation of the elemental distribution in a sample. With the improvement of X-ray optics and spectroscopic X-ray imagers, full field X-ray fluorescence (FF-XRF) methods are feasible. A new device for high-resolution X-ray imaging, an energy and spatial resolving X-ray camera, is presented. The basic idea behind this so-called 'color X-ray camera' (CXC) is to combine an energy dispersive array detector for X-rays, in this case a pnCCD, with polycapillary optics. Imaging is achieved using multiframe recording of the energy and the point of impact of single photons. The camera was tested using a laboratory 30 µm microfocus X-ray tube and synchrotron radiation from BESSY II at the BAMline facility. These experiments demonstrate the suitability of the camera for X-ray fluorescence analytics. The camera simultaneously records 69696 spectra with an energy resolution of 152 eV for manganese Kα with a spatial resolution of 50 µm over an imaging area of 12.7 × 12.7 mm². It is sensitive to photons in the energy region between 3 and 40 keV, limited by a 50 µm beryllium window, and the sensitive thickness of 450 µm of the chip. Online preview of the sample is possible as the software updates the sums of the counts for certain energy channel ranges during the measurement and displays 2-D false-color maps as well as spectra of selected regions. The complete data cube of 264 × 264 spectra is saved for further qualitative and quantitative processing. KW - Color X-ray camera KW - X-ray fluorescence KW - pnCCD KW - Polycapillary optic KW - Synchrotron radiation PY - 2011 DO - https://doi.org/10.1021/ac102811p SN - 0003-2700 SN - 1520-6882 VL - 83 IS - 7 SP - 2532 EP - 2538 PB - American Chemical Society CY - Washington, DC AN - OPUS4-23948 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Emmerling, Franziska A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Thünemann, Andreas T1 - Real-time monitoring of copolymer stabilized growing gold nanoparticles JF - Langmuir N2 - A great challenge in the production of nanoparticles with defined sizes and properties is to control their growth in situ. We developed a dedicated combined small-angle X-ray scattering (SAXS) and X-ray absorption spectroscopy (XAS) setup to monitor nanoparticle formation in solution. The capabilities of simultaneously deriving particle sizes and oxidation states of atoms/ions are illustrated for the formation of spherical gold nanoparticles by the reduction of hydrogen tetrachloroaureate (HAuCl4). Particles with initial radii of 4.60 ± 0.10 nm and final radii of 5.67 ± 0.10 nm were produced in a levitated droplet with a volume of 4 µL. An ethylene oxide/propylene oxide triblock copolymer PEO-PPO-PEO (Pluronic F-127) functions as reducing agent and colloidal stabilizer. XANES shows in situ how the gold was reduced in the droplet from Au(III) to Au(0), and simultaneously SAXS recorded the size distribution of the formed nanoparticles. It is shown that the final particle number is reached quickly. Thereafter, only the particles’ sizes increase. Comparison of XANES and SAXS shows that the quantity of Au(0) is higher than the quantity of gold located in the nanoparticles while the particles are growing. Finally, all the Au(0) is found in the nanoparticles. We tentatively attribute this finding to the pseudo crown ether effect of the polymer surfactant that kinetically stabilizes gold atoms when formed from gold ions within their protecting cavity. A simple “burst” mechanism for the gold nanoparticle formation is the consequence. The possibility of an inhomogeneous particles structure with an enhanced density near the particle surface is discussed. PY - 2010 DO - https://doi.org/10.1021/la903829q SN - 0743-7463 SN - 1520-5827 VL - 26 IS - 8 SP - 5889 EP - 5894 PB - American Chemical Society CY - Washington, DC AN - OPUS4-21223 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Kraehnert, R. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Thünemann, Andreas A1 - Emmerling, Franziska T1 - New insights of the nucleation and growth process of gold nanoparticles via in situ coupling of SAXS and XANES JF - Journal of physics / Conference series N2 - Although metallic nanoparticles play an important role in the area of nanotechnology, a coherent mechanistic explanation for the evolution of the particles during their chemical synthesis has not yet been provided in many cases. To gain a profound understanding of the growth mechanism of colloidal nanoparticles, new approaches using Small Angle X-Ray Scattering (SAXS) combined with X-ray absorption near-edge structure (XANES) are presented. This combination allows for insights into two prominent syntheses routes of gold nanoparticles (GNP): The 'slow' reaction using sodium citrate (30-90 min) as a reducing agent and the 'fast' reaction employing NaBH4 (within few seconds). In the first case data derived with the coupled XANES and SAXS suggests a four-step particle formation mechanism. For the second system a time resolution in the order of 100-200 ms was achieved by coupling a common laboratory SAXS instrument with a microstructured mixer, which allows data acquisition in a continuous-flow mode. The results indicate a coalescence driven growth process. Based on the capabilities to deduce the size, number and polydispersity of the particles, the results of both methods enable the development of mechanistic schemes explaining the different phases of particle formation and growth, thus providing a basis for improved control over the synthesis processes. KW - SAXS KW - XANES KW - Nanoparticle formation PY - 2010 DO - https://doi.org/10.1088/1742-6596/247/1/012051 SN - 1742-6588 SN - 1742-6596 VL - 247 IS - 1 SP - 012051-1 - 012051-10 PB - IOP Publ. CY - Bristol, UK AN - OPUS4-22684 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Buzanich, Günter A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Riesemeier, Heinrich A1 - Thünemann, Andreas A1 - Streli, C. T1 - Impurities in multicrystalline silicon wafers for solar cells detected by synchrotron micro-beam X-ray fluorescence analysis JF - Journal of analytical atomic spectrometry N2 - We report on the trace analysis of copper and iron impurities in multicrystalline silicon wafers with the microbeam X-ray fluorescence (µ-XRF) technique. The efficiency of solar cells, which are based on multicrystalline silicon wafers, is strongly influenced by minor contamination with metals such as copper and iron. Application of compound refractive lenses (CRLs) in µ-XRF allows versatile two-dimensional mapping of relevant contaminations and localization of their sites of deposition. In this context, the measured bulk average limit of detection (LOD) was one picogram of iron and copper per gram of silicon. We suggest that µ-XRF is a valuable tool for non-destructive spatial (3D) quantification of metal impurities in a wide range of materials and devices whose functioning could be critically affected by impurities. KW - X-ray micro beam KW - Compound refractive lens KW - Solar cell KW - Silicon impurities PY - 2012 DO - https://doi.org/10.1039/c2ja30188a SN - 0267-9477 SN - 1364-5544 VL - 27 IS - 11 SP - 1875 EP - 1881 PB - Royal Society of Chemistry CY - London AN - OPUS4-26791 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Polte, Jörg A1 - Herder, Martin A1 - Erler, Robert A1 - Rolf, Simone A1 - Fischer, A. A1 - Würth, Christian A1 - Thünemann, Andreas A1 - Kraehnert, R. A1 - Emmerling, Franziska T1 - Mechanistic insights into seeded growth processes of gold nanoparticles JF - Nanoscale N2 - A facile approach for the synthesis of monodisperse gold nanoparticles with radii in the range of 7 to 20 nm is presented. Starting from monodisperse seeds with radii of 7 nm, produced in the first step, the addition of a defined amount of additional precursor material permits distinct size regulation and the realization of predicted nanoparticle sizes. These information were derived from ex- and in situ investigations by comprehensive small angle X-ray scattering (SAXS), X-ray absorption near edge structure (XANES) and UV-Vis data to obtain information on the physicochemical mechanisms. The obtained mechanisms can be transferred to other seeded growth processes. Compared to similar approaches, the presented synthesis route circumvents the use of different reducing or stabilizing agents. The size of resulting nanoparticles can be varied over a large size range presented for the first time without a measurable change in the shape, polydispersity or surface chemistry. Thus, the resulting nanoparticles are ideal candidates for size dependence investigations. KW - Gold nanoparticles KW - SAXS KW - XANES KW - Growth mechanism PY - 2010 DO - https://doi.org/10.1039/c0nr00541j SN - 2040-3364 SN - 2040-3372 VL - 2 IS - 11 SP - 2463 EP - 2469 PB - RSC Publ. CY - Cambridge AN - OPUS4-22346 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Mair, Georg A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Auswirkungen von unfallbedingtem Behälterversagen bei alternativen Pkw-Antrieben - Teil 1: Problemstellung, Stand der Technik und Voruntersuchungen JF - Technische Sicherheit N2 - Flüssige und komprimierte Gase sind in Deutschland, Europa und der Welt vielfältig als alternative Kraftstoffe im Einsatz. Diese werden unter teilweise hohem Druck in robusten Behältern an Bord gespeichert. Ein Versagen des Treibstoffbehälters im Schadensfall sollen verschiedene Sicherheitseinrichtungen, auch bei einem eventuell unfallbedingt auftretenden Fahrzeugbrand, verhindern. Sind diese Sicherheitseinrichtungen unfallbedingt beschädigt oder liegen die Belastungen dieser Einrichtung außerhalb ihres Auslegungsbereichs, ist ein Versagen des Behälters dennoch möglich. Dadurch kann es zur Bildung eines explosionsfähigen Brennstoff-Luft-Gemischs mit den entsprechenden Folgen für Fahrgäste, Einsatzkräfte und Umfeld kommen. Die Bundesanstalt für Materialforschung und -prüfung (BAM) untersucht im Forschungsprojekt "CoFi-ABV" mit umfangreichen zerstörenden Versuchsreihen im Realmaßstab die Folgen des unfallbedingten Versagens von Behältern für alternative Kraftstoffe und Maßnahmen zur Reduktion dieser Folgen im Rahmen einer ganzheitlichen Auswirkungsbetrachtung. Dieser Beitrag ist der Start einer Reihe und soll die Problemstellung sowie die Projektinhalte umfassend erläutern. KW - Alternative Antriebe KW - Alternative Kraftstoffe KW - Behälterversagen KW - Fahrzeugbrand PY - 2016 SN - 2191-0073 VL - 6 IS - 9 SP - 39 EP - 46 PB - Springer-VDI-Verlag CY - Düsseldorf AN - OPUS4-37360 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Patrick P. A1 - Kohlhoff, Harald A1 - Hüllmann, Dino A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Krentel, Daniel A1 - Mair, Georg A1 - Rudolph, Michael A1 - Schoppa, André A1 - Szczepaniak, Mariusz A1 - Storm, Sven-Uwe A1 - Tschirschwitz, Rico T1 - Auswirkungen von Behälterversagen bei alternativen PKW-Antrieben - Teil 2: UAV-basierte Fernerkundung von Gaswolken JF - Technische Sicherheit N2 - Verkehrsunfälle unter Beteiligung von Fahrzeugen mit alternativen Kraftstoffen wie LPG („Autogas“, Liquefied Petroleum Gas), CNG (Compressed Natural Gas, komprimiertes Erdgas) oder CGH2 (Compressed Gas Hydrogen, komprimierter Wasserstoff), bergen neue, komplexe Risiken für Passagiere, Einsatzkräfte und deren Umfeld. Im Rahmen des Projektes „CoFi-ABV“ beschäftigt sich die Bundesanstalt für Materialforschung und -prüfung (BAM) unter Berücksichtigung komplexer Brand- und Explosionsszenarien mit einer ganzheitlichen Betrachtung der Auswirkungen des unfallbedingten Versagens von Gasbehältern für alternative Kraftstoffe. Ein wichtiger Teil des Forschungsvorhabens umfasst Entwicklung, Aufbau und Validierung einer unbemannten Flugplattform (Unmanned Aerial Vehicle, UAV) zur Ferndetektion von Gaswolken. Für das sogenannte gassensitive Mini-UAV wird ein robuster Open-Path-Gasdetektor auf einer Sensorbewegungsplattform in Form eines modifizierten Kamera-Gimbals, integriert. Ziel ist es, ein leistungsfähiges und robustes Werkzeug zu entwickeln, welches Einsatzkräften im Falle eines Unfalls als Hilfe zur Abschätzung der Gefahr durch Gaswolken, ihrer Ausbreitung und der notwendigen Absperrbereiche zur Verfügung steht. Dieser Artikel ist der zweite der Reihe und legt, nach Projektvorstellung im ersten Teil, nun den Schwerpunkt auf das gassensitive Mini-UAV. KW - UAV KW - Fernerkundung KW - Open-Path-Gasdetektor KW - Alternative Antriebe/Kraftstoffe KW - Behälterversagen PY - 2016 SN - 2191-0073 VL - 6 IS - 11/12 SP - 23 EP - 28 PB - Springer-VDI-Verlag CY - Düsseldorf AN - OPUS4-38517 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Tschirschwitz, Rico A1 - Krentel, Daniel T1 - Complex Fires - Auswirkung von Behälterversagen N2 - Auswirkung des Versagens von Gasbehältern für alternative Treibstoffe in Fahr-zeugen unter Berücksichtigung komplexer Brand- und Explosionsszenarien T2 - 5. Fachtagung „Technische Rettung aus Pkw“ CY - Berlin, Germany DA - 02.03.2016 KW - Behälterversagen KW - Explosionsszenarien KW - Gasbehälter PY - 2016 AN - OPUS4-35499 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Mair, Georg A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczpaniak, Mariusz T1 - Auswirkungen von Behälterversagen - Ein Projekt des Themenfeldes "Infrastruktur" N2 - Vorstellung des Projektes: Auswirkung des Versagens von Gasbehältern für alternative Treibstoffe in Fahrzeugen unter Berücksichtigung komplexer Brand- und Explosionsszenarien. T2 - 1. Öffentlicher Workshop des TF-Projektes CoFi ABV mit externen Partnern (Feuerwehren, Unfallversicherungsträgern etc.) CY - BAM TTS, Horstwalde, Germany DA - 27.01.2016 KW - Alternative Antriebe KW - Alternative Kraftstoffe KW - Behälterversagen KW - Fahrzeugbrand PY - 2016 AN - OPUS4-38596 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Mair, Georg A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Complex fires - Auswirkung von Behälterversagen; CoFi-ABV: Ein Projekt des Themenfelds Infrastruktur N2 - Auswirkung des Versagens von Gasbehältern für alternative Treibstoffe in Fahrzeugen unter Berücksichtigung komplexer Brand- und Explosionsszenarien (Vorstellung des Projektes CoFi-ABV). T2 - 1. Öffentlicher Workshop des TF-Projektes CoFi ABV mit externen Partnern (Feuerwehren, Unfallversicherungsträgern etc.) CY - BAM TTS, Horstwalde, Germany DA - 27.01.2016 KW - Alternative Antriebe KW - Alternative Kraftstoffe KW - Behälterversagen KW - Fahrzeugbrand PY - 2016 AN - OPUS4-38550 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Mair, Georg A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Complex Fires - Auswirkungen von Behälterversagen - Gassensorik zur Gaswolken-Detektion T1 - Complex Fires - Consequences of failure of gas tanks - Sensors for the dynamic detection of gas clouds N2 - Im Rahmen des Projekts CoFi-ABV sollen die Auswirkungen des Versagens von Gasbehältern für alternative Treibstoffe in Fahrzeugen unter Berücksichtigung komplexer Brand-und Explosionsszenarien untersucht werden. Hierfür sind eine Vielzahl von zerstörenden Groß-versuchen geplant. N2 - The focus of the project „Complex Fires –Consequences of accidental failure of gas tanks“ (CoFi-ABV) is the examination of the con-sequences and the impact of failure of gas tanks for alternative fuels for vehicles considering complex fire and explosion scenarios. The project comprises a multitude of destructive tests in real scale. T2 - 2. öffentlicher Workshop des TF-Projektes CoFi-ABV mit externen Partnern (Feuerwehren, Unfallversicherungsträgern, Behörden etc.) CY - BAM, Fabeckstraße, Berlin, Germany DA - 15.11.2016 KW - Alternative Antriebe KW - Alternative Kraftstoffe KW - Behälterversagen KW - Fahrzeugbrand KW - Gassensorik PY - 2016 AN - OPUS4-38632 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Mair, Georg A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Complex Fires - Auswirkung von Behälterversagen - Gas-sensitives Mikro-UAV T1 - ComplexFires–Consequences of failure of gas tanks - Gas-sensitive Micro-UAV N2 - Im Rahmen des Projekts CoFi-ABV sollen die Auswirkungen des Versagens von Gasbehältern für alternative Treibstoffe in Fahrzeugen unter Berücksichtigung komplexer Brand-und Explosionsszenarien untersucht werden. Hierfür sind eine Vielzahl von zerstörenden Groß-versuchen geplant. N2 - The focus of the project „Complex Fires –Consequences of accidental failure of gas tanks“ (CoFi-ABV) is the examination of the con-sequences and the impact of failure of gas tanks for alternative fuels for vehicles considering complex fire and explosion scenarios. The project comprises a multitude of destructive tests in real scale. T2 - 2. öffentlicher Workshop des TF-Projektes CoFi-ABV mit externen Partnern (Feuerwehren, Unfallversicherungsträgern, Behörden etc.) CY - BAM, Fabeckstraße, Berlin, Germany DA - 15.11.2016 KW - Alternative Antriebe KW - Alternative Kraftstoffe KW - Behälterversagen KW - Fahrzeugbrand KW - Gassensorik PY - 2016 AN - OPUS4-38635 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Mair, Georg A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Unterfeuerung einer 33 kg-Propangasflasche zur Bewertung einer Gasbefeuerungsmethode N2 - LPG-Behälter, wie sie etwa in Fahrzeugen häufig als Nachrüstlösung zum Einsatz kommen, können bei einer Unterfeuerung und unzureichender oder versagender Druckentlastung bersten. Im Extremfall ist dabei der sogenannte BLEVE möglich. T2 - 1. öffentlicher Workshop des TF-Projektes CoFi ABV mit externen Partnern (Feuerwehren, Unfallversicherungsträgern etc.) CY - BAM TTS, Horstwalde, Germany DA - 27.01.2016 KW - Alternative Antriebe KW - Alternative Kraftstoffe KW - Behälterversagen KW - Fahrzeugbrand PY - 2016 AN - OPUS4-38624 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Mair, Georg A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Experimentelle Bestimmung des effektiven Wärmeeintrags in einen flaschenähnlichen Prüfkörper N2 - Die hier vorgestellten Versuche sind Teil des Themenfeldprojekts „Auswirkung des Versagens von Gasbehältern für alternative Treibstoffe in Fahrzeugen unter Berücksichtigung komplexer Brand- und Explosionsszenarien (CoFi-ABV )“. T2 - 1. Öffentlicher Workshop des TF-Projektes CoFi ABV mit externen Partnern (Feuerwehren, Unfallversicherungsträgern etc.) CY - BAM TTS, Horstwalde, Germany DA - 27.01.2016 KW - Alternative Antriebe KW - Alternative Kraftstoffe KW - Behälterversagen KW - Fahrzeugbrand PY - 2016 AN - OPUS4-38617 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Neumann, Patrick P. A1 - Storm, Sven-Uwe A1 - Rudolph, Michael A1 - Schoppa, André A1 - Sczepaniak, Mariusz T1 - Mobile gas cylinders in fire: Consequences in case of failure JF - Fire Safety Journal N2 - Commercial, off-the shelf propane cylinders are subjected to high safety regulations. Furthermore, those cylinders are equipped with safety devices like pressure relief valves (PRV). Despite these regulations and safety measures, a failure of the container is possible if exposed to an intense fire. The result of this is severe hazard for users, rescue forces and infrastructure. Within the framework of a destructive test series, 15 identical propane cylinders, without pressure relief devices, were exposed to an intensive fire in horizontal position until failure. Each cylinder was filled with a mass of m =11 kg of liquid propane. Three different fire sources were used (wood, petrol, propane). The experiments revealed the failure of all cylinders in a time period t < 155 s. The failure lead to a fragmentation into several major parts with throwing distances of up to l =262 m. In all trials, the temperature of the cylinder wall (top, side, bottom), of the liquid phase inside and of the surrounding fire (top, side, bottom) was recorded. In addition, the inner cylinder pressure and the induced overpressure of the blast wave after the failure were recorded. Overpressures of up to p=0.27 bar were recorded close to the cylinder (l =5 m). All tests were documented by video from several positions (general view, close-up, high-speed 5000 fps). This test series creates the basis for further experimental studies in the field of alternative fuels for vehicles. The aim of this test series is to assess and analyse the consequences of the failure of gas vessels (for LPG, CNG, CGH2) in the aftermath of severe incidents. KW - Explosion KW - Gas cylinders KW - Consequences PY - 2017 UR - http://www.sciencedirect.com/science/article/pii/S037971121730098X DO - https://doi.org/10.1016/j.firesaf.2017.05.006 SN - 0379-7112 SN - 1873-7226 VL - 91 SP - 989 EP - 996 PB - Elsevier AN - OPUS4-40550 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Krentel, Daniel A1 - Tschirschwitz, Rico T1 - Sicherheit in Technik und Chemie - Großversuche im Bereich Brand- und Explosionsschutz N2 - Der Vortrag enthält eine Beschreibung der umfangreichen Möglichkeiten, die die BAM mit ihrem TTS für Großversuche im Bereich Brand- und Explosionsschutz bereithält. Außerdem wird das Themenfeld-Projekt CoFi-ABV kurz vorgestellt. T2 - Infoveranstaltung des BMBF zum EU-Programm "Sichere Eigenschaften - Horizont 2020" CY - Bonn, Germany DA - 28.03.2017 KW - Großversuche KW - Explosionsschutz KW - Alternative Antriebe KW - Behälterversagen KW - Alternative Kraftstoffe PY - 2017 AN - OPUS4-39607 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Tschirschwitz, Rico A1 - Holtappels, Kai A1 - Pelzl, T. T1 - Feuerwehrmerkblätter zu Druckgasbehältern im Brandeinsatz T2 - Proceedings der 13. Fachtagung Anlagen, Arbeits- und Umweltsicherheit N2 - Die BAM hat zum Verhalten von Acetylen- und Propangasflaschen bei einer Vollunterfeuerung umfangreiche Versuchsreihen zur Auswirkungsbetrachtung des Behälterversagens auf dem TTS durchgeführt. In Zusammenarbeit mit verschiedenen Partnern entstanden zwei Merkblätter mit praktischen Hinweisen für Einsatzkräfte, die die aktuellen Forschungsarbeiten der BAM berücksichtigen. T2 - 13. Fachtagung Anlagen, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 16.11.2017 KW - Behälterversagen KW - Gassicherheit KW - Feuerwehr KW - Acetylen KW - Propan PY - 2017 SN - 978-3-96057-032-5 SP - 1 EP - 9 AN - OPUS4-42953 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Neumann, Patrick P. A1 - Rudolpf, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Propangasbehälter im Feuer: Auswirkungen des Versagens T2 - Proceedings der 13. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit N2 - In einer Großversuchsserie wurden auf dem BAM-TTS 15 11-kg-Propangasflaschen ohne Sicherheitseinrichtung mit drei verschiedenen Methoden (Holz, Benzinpool, Gas) unterfeuert. Der Beitrag beschreibt die dokumentierten Auswirkungen (z. B. Fragmentierung, Überdruck), die Art des Versagens sowie den Behälterzustand zum Zeitpunkt des Versagens. T2 - 13. Fachtagung Anlagen-, Arbeits- und Umweltsicherheit CY - Köthen, Germany DA - 16.11.2017 KW - Behälterversagen KW - Gassicherheit KW - Feuerwehr KW - Propan KW - Auswirkungsbetrachtung PY - 2017 SN - 978-3-96057-032-5 SP - 1 EP - 2 AN - OPUS4-42954 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Kluge, Martin A1 - Askar, Enis A1 - Kohlhoff, Harald A1 - Mair, Georg A1 - Rudolph, Michael A1 - Schoppa, Andre A1 - Storm, Sven-Uwe A1 - Szcepaniak, Mariusz T1 - Consequences of the failure of mobile gas vessels T2 - Hazards 27 N2 - Small, mobile propane gas vessels are widely spread and comprise additional hazards in case of a surrounding, intensive fire. The aim of the presented work is to holistically investigate the potential consequences of failure of these off-the-shelf propane gas vessels in case of an absence or malfunction of safety devices. In order to generate a statistically valid dataset, a total of 15 identical propane gas bottles without pressure relief device, each containing m = 11 kg of liquid propane, were underfired in horizontal position. For each selected fire type (wood fire, petrol pool fire, propane gas fire), five vessels were tested under identical conditions. Next to extensive camera equipment including a high-speed camera, systems to record the internal pressure of the gas cylinder, the resulting shock wave overpressure (three positions) and the flame and vessel temperature (three + three positions) during the underfiring were used. Also the unsteady, highly dynamical thermal radiation caused by the explosion of the expanding gas cloud was logged. The fragments were georeferenced and weighed after each test. The experiments prove the failure of all the gas cylinders at a burst pressure of pb = [71 … 98 bar] with a fragmentation into up to seven parts (average: four objects) and a subsequent explosion of the expanding vapour after mixing with the surrounding air. The overpressure measured in the close-up range (distance to the cylinder d = 5 m) resulting from the shockwave caused by the cylinder burst was up to pmax = 0.27 bar, which can potentially lead to significant injuries to humans and damage to building structures and infrastructure, especially in connection with the explosion and the resultant thermal radiation. The distance covered by the fragments after the failure was up to r = 260 m; 47% of the fragments hit the ground more than r = 50 m away from the position of failure. T2 - Hazards 27 CY - Birmingham, UK DA - 10.05.2017 KW - Failure of gas vessels KW - Propane cylinder KW - Gas explosion KW - Consequences KW - Fragmentation PY - 2017 SN - 978-1-911446-57-6 SP - 1 EP - 12 PB - Instiution of Chemical Engineers CY - Rugby, UK AN - OPUS4-41160 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krentel, Daniel A1 - Rudolph, Michael A1 - Tschirschwitz, Rico A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Neumann, Patrick P. A1 - Schalau, Bernd A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz A1 - Mair, Georg T1 - Infrared radiation measurement at failure of mobile gas vessels T2 - Tagungsband ICDERS N2 - 15 identical off-the-shelf propane cylinders (m = 11 kg liquid propane) were underfired. The infrared Radiation of the Explosion, that occurred in the aftermath of the vessel failure, was recorded using four bolometers. These measurements are compared with an estimation of the Maximum intensity gained by an Analysis of the Video data, an Extended Version of the Stefan-Boltzmann law and a BLEVE model. T2 - 26th International Colloquium on the Dynamics of Explosions and Reactive Systems CY - Boston, USA DA - 30.07.2017 KW - Failure of gas vessels KW - Propane cylinder KW - Gas explosion KW - Consequences KW - Infrared radiation PY - 2017 SP - 1 EP - 6 PB - FM Global CY - Seattle, USA AN - OPUS4-41993 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Auswirkungen von Behälterversagen bei alternativen PKW-Antrieben - Teil 3: Auswirkungen des Versagens von 11-kg-Propangasbehältern im Feuer JF - Technische Sicherheit N2 - In Deutschland gibt es eine große Anzahl von Kraftfahrzeugen, die mit alternativen Antrieben (z. B. LPG (Liquefied Petroleum Gas), CNG (Compressed Natural Gas)) ausgerüstet sind. In zahlreichen Großversuchsserien untersucht die Bundesanstalt für Materialforschung und -prüfung (BAM) im Rahmen des internen Forschungsprojekts CoFi-ABV (Complex Fires – Auswirkungen von Behälterversagen) die Auswirkungen beim Versagen der Treibstoffbehälter dieser alternativen Antriebe. Ziel dieser Untersuchungen ist eine ganzheitliche Auswirkungsbetrachtung, um die Risiken für Feuerwehren und Rettungskräfte besser abschätzen zu können. Im Vorfeld zu den Versuchen für LPG- und CNG-Tanks wurden in einer weiteren Versuchsserie 15handelsübliche 11-kg-Propangasflaschen ohne Sicherheitseinrichtung unterfeuert. Alle 15 Behälter haben – wie zu erwarten war – versagt. Neben den Zustandsdaten des Behälters zum Versagenszeitpunkt (Temperatur des Behältermantels, Innendruck und -temperatur) wurden die Auswirkungen auf die Umgebung hinsichtlich Druckwirkung und Fragmentierung (Anzahl, Masse, Distanz, Richtung) dokumentiert. KW - Behälterversagen KW - Gassicherheit KW - Feuerwehr KW - Propan KW - Auswirkungsbetrachtung PY - 2017 SN - 2191-0073 VL - 7 IS - 11/12 SP - 25 EP - 32 PB - Springer-VDI-Verlag GmbH & Co. KG CY - Düsseldorf AN - OPUS4-43270 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Krüger, Simone A1 - Neumann, Patrick P. A1 - Rudolph, Miachael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz ED - Aga, Diana ED - Daugulis, Andrew ED - Li Puma, Gianluca ED - Lyberatos, Gerasimos ED - Tay, Joo Hwa ED - Lima, Éder Claudio T1 - Hazards from failure of CNG automotive cylinders in fire JF - Journal of Hazardous Materials N2 - Compressed natural gas (CNG) is a widely used automotive fuel in a variety of countries. In case of a vehicle fire where the safety device also malfunctions, a failure of the CNG automotive cylinder could occur. Such a cylinder failure is associated with severe hazards for the surrounding environment. Firstly, a comprehensive analysis is given below, summarizing various accidents involving CNG automotive cylinders and their consequences. In an extensive experimental program, 21 CNG automotive cylinders with no safety device were tested. Of the 21, burst tests were carried out on 5 Type III and 5 Type IV cylinders. Furthermore, fire tests with 8 Type III and 3 Type IV cylinders were conducted. Apart from cylinder pressure, inner temperature and cylinder mantle temperature, the periphery consequences, such as nearfield blast pressure and fragmentation are documented. The maximum measured overpressure due to a Type III cylinder failure was p = 0.41 bar. Each traceable fragment was georeferenced. All-in-all, fragment throw distances of d > 300 m could be observed. As one key result, it can be stated that the tested Type IV CNG cylinders showed less critical failure behavior then the Type III cylinders under fire impingement. KW - CNG KW - Composite cylinder KW - Gas cylinder KW - Tank failure KW - Fragments PY - 2019 DO - https://doi.org/10.1016/j.jhazmat.2018.12.026 SN - 0304-3894 SN - 1873-3336 VL - 367 SP - 1 EP - 7 PB - Elsevier CY - New York City, New York, USA AN - OPUS4-47135 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Kluge, Martin A1 - Grasse, Dennis A1 - Holtappels, Kai A1 - Pelzl, T. T1 - Umgang mit Druckgasbehältern im Brandeinsatz JF - BRANDSchutz N2 - Regelmäßig werden Einsatzkräfte der Feuerwehr bei Brandeinsätzen mit brand- bzw. wärmebeaufschlagten Druckgasbehältern konfrontiert. Aufgrund ihrer großen Verbreitung handelt es sich dabei oftmals um Propan- oder Acetylengasflaschen. Propangasflaschen mit Füllmengen bis 33 Kilogramm sind in flächendeckender Verwendung zum Beispiel in Handwerksbetrieben, Produktionsbereichen, Baustellen und Restaurants, werden aber oftmals auch zum Heizen und Kochen im Privatbereich verwendet. Acetylengasflaschen sind in Verbindung mit entsprechenden Sauerstoffbehältern ebenso in Werkstätten, gewerblichen Anlagen und auf Baustellen zum Autogenschweißen und thermischen Trennen in vielfacher Verwendung. Beide Arten von Druckgasbehältern sind darüber hinaus auch im Straßenverkehr als Gefahrgut und in kleineren Mengen auch als private Fracht anzutreffen. Die Deutsche Gesetzliche Unfallversicherung (DGUV) hat zusammen mit weiteren Experten als Hilfestellung und aufgrund neuer wissenschaftlicher Erkenntnisse zwei DGUV-Informationen für Einsatzkräfte zum Umgang mit wärmebeaufschlagten Druckgasbehältern erstellt. KW - Behälterversagen KW - Brandbekämpfung KW - Feuerwehr KW - Acetylen KW - Propan PY - 2019 SN - 0006-9094 VL - 73 IS - 2 SP - 103 EP - 109 PB - W. Kohlhammer CY - Stuttgart AN - OPUS4-47445 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Krentel, Daniel A1 - Tschirschwitz, Rico A1 - Kluge, Martin A1 - Askar, Enis A1 - Habib, Abdel Karim A1 - Kohlhoff, Harald A1 - Neumann, Patrick P. A1 - Rudolph, Michael A1 - Schoppa, André A1 - Storm, Sven-Uwe A1 - Szczepaniak, Mariusz T1 - Experimental investigation of failure of LPG gas tanks in passenger cars during full fire development T2 - Proceedings from the 5th International Conference on Fires in vehicle FIVE 2018 N2 - In continuation of a preceding test series involving sole LPG vehicle tanks, three passenger cars equipped with identical toroidal steel LPG tanks were set on fire. The tanks were installed in the space normally reserved for the spare tyre, in the car boot. No safety device was installed on the tank, in order to force critical failure of the cylinder. Two of the cars were equipped with a tank filled with liquefied propane to a level of 20 % (5.3 kg), the third one was filled completely (25.5 kg). The partially filled tanks failed critically within a time period of more than 20 min after the initiation of the fire. The fully-filled tank did not rupture; the propane was released continuously through a small leak that appeared during the fire. Comprehensive equipment was used to procure measurement data, enabling an analysis of potential consequences and hazards to humans and infrastructure within the vehicle surroundings. The inner status of the tank (pressure, temperature of the liquid phase and the steel casing), the development of the fire (temperature inside and around the vehicle) and the pressure induced in the near-field in case of tank rupture were recorded. The results were analysed in detail and compared against the data gained in tests involving sole, but identical LPG tanks. T2 - FIVE 2018 CY - Boras, Sweden DA - 03.10.2018 KW - Behälterversagen KW - LPG KW - Alternative Antriebe KW - Fahrzeugbrand KW - Auswirkungsbetrachtung PY - 2018 SN - 978-91-88695-95-6 VL - 51 SP - 123 EP - 131 PB - RISE Safety CY - Boras AN - OPUS4-46310 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Kluge, Martin A1 - Krentel, Daniel ED - Tschirschwitz, Rico T1 - Druckgasbehälter im Feuer - Auswirkungen im Versagensfall T2 - Open Access Repository der Physikalisch-Technischen Bundesanstalt N2 - Es wurden insgesamt 57 Einzelversuche zum Versagen von Druckgasbehältern durchgeführt. Untersucht wurden dabei 11-kg-Propangasflaschen, PKW-Radmuldentanks für LPG- sowie CNG-Tanks vom Typ III (Compositetanks mit Aluminiumliner) und Typ IV (Compositetanks mit Polymerliner). Mit 18 hydraulischen Berstversuchen wurde das Versagensverhalten unter kalten Bedingungen charakterisiert. In 39 Unterfeuerungsversuchen mit den gefüllten LPG- und CNG-Tanks, davon 36 mit Tanks ohne Sicherheitseinrichtung, wurde das Behälter¬ver¬sagen durch Brandbeaufschlagung untersucht. Neben verschiedenen Behältermantel¬temperaturen und dem Behälterinnendruck wurde auch die Temperatur des gespeicherten Mediums dokumentiert. Dadurch war es möglich, genau zu dokumentieren, unter welchen Bedingungen und bei welchem Zustand der Behälter versagt hat. In einem Großteil der Unterfeuerungsversuche mit Behältern ohne Sicherheitseinrichtungen kam es zur Bildung eines Feuerballs, einer massiven Druck- und Temperaturwirkung auf den Nahbereich sowie einer Vielzahl von Fragmenten im Nah- und Fernbereich. In einer Entfernung von l = 7 m wurden Überdrücke von bis zu p = 0,41 bar gemessen. In 30 Unterfeuerungsversuchen kam es zur Fragmentierung des Behälters. Dabei konnten 159 Fragmente mit Wurfweite und Masse dokumentiert werden. Die dabei maximal festgestellte Wurfweite eines Fragments lag bei l = 311 m. T2 - 15. BAM/PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Brunswick, Germany DA - 21.05.2019 KW - Behälterversagen KW - Druckgasbehälter KW - LPG KW - Feuer KW - Propan PY - 2019 DO - https://doi.org/10.7795/210.20190521L VL - 15. SP - 1 EP - 20 PB - PTB CY - Braunschweig AN - OPUS4-48086 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Kluge, Martin T1 - Druckgasbehälter im Feuer - Auswirkungen im Versagensfall T2 - PTB-Mitteilungen N2 - Es wurden insgesamt 57 Einzelversuche zum Versagen von Druckgasbehältern durchgeführt. Untersucht wurden dabei 11-kg-Propangasflaschen, PKW-Radmuldentanks für LPG sowie CNG-Tanks vom Typ III (Compositetanks mit Aluminiumliner) und Typ IV (Compositetanks mit Polymerliner). Mit 18 hydraulischen Berstversuchen wurde das Versagensverhalten unter kalten Bedingungen charakterisiert. In 39 Unterfeuerungsversuchen mit den gefüllten LPG- und CNG-Tanks, davon 36 mit Tanks ohne Sicherheitseinrichtung, wurde das Behälterversagen durch Brandbeaufschlagung untersucht. Neben verschiedenen Behältermanteltemperaturen und dem Behälterinnendruck wurde auch die Temperatur des gespeicherten Mediums dokumentiert. Dadurch war es möglich, genau zu dokumen-tieren, unter welchen Bedingungen und bei welchem Zustand der Behälter versagt hat. In einem Großteil der Unterfeuerungsversuche mit Behältern ohne Sicherheitseinrichtungen kam es zur Bildung eines Feuerballs, einer massiven Druck- und Temperaturwirkung auf den Nahbereich sowie einer Vielzahl von Fragmenten im Nah- und Fernbereich. In einer Entfernung von l = 7 m wurden Überdrücke von bis zu p = 0,41 bar gemessen. In 30 Unterfeuerungsversuchen kam es zur Fragmentierung des Behälters. Dabei konnten 159 Fragmente mit Wurfweite und Masse dokumentiert werden. Die dabei maximal festgestellte Wurfweite eines Fragments lag bei l = 311 m. T2 - 15. BAM-PTB-Kolloquium zur chemischen und physikalischen Sicherheitstechnik CY - Brunswick, Germany DA - 21.05.2019 KW - Behälterversagen KW - Druckgasbehälter KW - Propan KW - LPG KW - CNG PY - 2020 DO - https://doi.org/10.7795/310.20200199 SN - 0030-834X VL - 130 IS - 1 SP - 55 EP - 70 AN - OPUS4-50570 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Tschirschwitz, Rico A1 - Krentel, Daniel A1 - Holtappels, Kai T1 - Research in the field of hydrogen safety at BAM N2 - The presentation introduces the BAM as well as the experimental possibilites at the BAM TTS in the first part. The general possibilities regarding Power2Gas with respect to hydrogen production by electrolysis are preseneted. Furthermore the Hydrogen Strategy of Germany and the status quo regarding grenn energy solutions in the transport sector are given. In the last part of the presentation a short overview of relevant investigations in the field of hydrogen safety and alternative fuels for cars as well as perspectively planned investigations of the BAM in this area are presented. T2 - Fall Meeting of the Korean Society of Safety (KOSOS) CY - Busan, South Korean DA - 13.11.2019 KW - Explosion KW - Power2Gas KW - Hydrogen KW - LPG KW - CNG PY - 2019 AN - OPUS4-50011 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Shanmugam, Sankaran A1 - Peterlechner, Martin A1 - Iskandar, Mohamad Riza A1 - Saikia, Ujjal A1 - Kulitckii, Vladislav A1 - Lipińska-Chwałek, Marta A1 - Mayer, Joachim A1 - Rösner, Harald A1 - Hickel, Tilmann A1 - Divinski, Sergiy V. A1 - Wilde, Gerhard T1 - Coherent twin-oriented Al3Sc-based precipitates in Al matrix JF - Scripta Materialia N2 - Al3(Sc,Zr,Ti) nanoparticles with an ideal twin-type orientation relationship to Al host matrix were found in cold-rolled and subsequently annealed Al-based alloy. Atomic-scale investigations using high-resolution scanning transmission electron microscopy identified particles that form prominent coherent (111) twin-type interfaces along their longer facets and semi-coherent twin interfaces on their shorter facets. Ab-initio calculations showed that a coherent Al/Al3Sc twin-like phase boundary corresponds to a local energy minimum. A model is proposed explaining the formation of the twin orientation relationship of an Al3Sc nanoparticle with the Al host matrix. KW - Al-based alloy KW - Precipitation KW - Twin orientation relationship KW - Ab initio calculations KW - Transition electron microscopy PY - 2023 DO - https://doi.org/10.1016/j.scriptamat.2023.115351 SN - 1359-6462 VL - 229 SP - 1 EP - 6 PB - Elsevier BV AN - OPUS4-58789 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schilling, Markus A1 - Marschall, Niklas A1 - Niebergall, Ute A1 - Böhning, Martin T1 - Dataset of comprehensive Full-notch creep tests (FNCT) of selected high-density polyethylene (PE-HD) materials N2 - The dataset provided in this repository comprises data obtained from a series of full-notch creep tests (FNCT) performed on selected high-density polyethylene (PE-HD) materials (for further details, see section 1 Materials in this document) in accordance with the corresponding standard ISO 16770. The FNCT is one of the mechanical testing procedures used to characterize polymer materials with respect to their environmental stress cracking (ESC) behavior. It is widely applied for PE-HD materials, that are predominantly used for pipe and container applications. It is based on the determination of the time to failure for a test specimen under constant mechanical load in a well-defined and temperature controlled liquid environment. The test device used here also allows for continuous monitoring of applied force, specimen elongation and temperature. KW - Polyethylene KW - Environmental Stress Cracking KW - Full-notch creep test KW - PE-HD KW - Crack growth PY - 2023 DO - https://doi.org/10.5281/zenodo.10143351 PB - Zenodo CY - Geneva AN - OPUS4-58835 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Oliveira Guilherme Buzanich, Ana A1 - Cakir, Cafer Tufan A1 - Radtke, Martin A1 - Haider, M. Bilal A1 - Emmerling, Franziska A1 - F. M. Oliveira, P. A1 - Michalchuk, Adam A. L. T1 - Dispersive x-ray absorption spectroscopy for time-resolved in situ monitoring of mechanochemical reactions JF - Journal of chemical physics N2 - X-ray absorption spectroscopy (XAS) provides a unique, atom-specific tool to probe the electronic structure of solids. By surmounting long-held limitations of powder-based XAS using a dynamically averaged powder in a Resonant Acoustic Mixer (RAM), we demonstrate how time-resolved in situ (TRIS) XAS provides unprecedented detail of mechanochemical synthesis. The use of a custom-designed dispersive XAS (DXAS) setup allows us to increase the time resolution over existing fluorescence measurements from ∼15 min to 2 s for a complete absorption spectrum. Hence, we here establish TRIS-XAS as a viable method for studying mechanochemical reactions and sampling reaction kinetics. The generality of our approach is demonstrated through RAM-induced (i) bottom-up Au nanoparticle mechanosynthesis and (ii) the synthesis of a prototypical metal organic framework, ZIF-8. Moreover, we demonstrate that our approach also works with the addition of a stainless steel milling ball, opening the door to using TRIS-DXAS for following conventional ball milling reactions. We expect that our TRIS-DXAS approach will become an essential part of the mechanochemical tool box. KW - In situ studies KW - Dipsersive XAS KW - Mechanochemistry KW - Time-resolved PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567659 DO - https://doi.org/10.1063/5.0130673 SN - 1089-7690 VL - 157 IS - 21 SP - 1 EP - 12 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-56765 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Gleim, Tobias A1 - Nehrig, Marko A1 - Musolff, André A1 - Wille, Frank T1 - R&D Activities by BAM Related to Transport Package Fire Testing N2 - Packages for the transport of radioactive material shall meet the mechanical and thermal test requirements of the International Atomic Energy Agency (IAEA) regulations for package design approval. Besides mechanical testing, the Federal Institute for Materials Research and Testing (BAM) performs thermal tests in accordance with the IAEA regulations. The thermal test includes a 30-minute 800°C fully engulfing fire. BAM continuously performs various thermal experiments for the investigation of the thermal response of packages with respect to the IAEA fire. The purpose of this paper is to give an overview of the already performed, ongoing and future physical tests and experiments of BAM in the field of thermal investigations. These research and development works shall support our competencies for the authority package design assessment. BAM operates a propane gas fire test facility. To be able to carry out comparative investigations and validity between the propane fire and the in detail prescribed pool fire test in the regulations, BAM carries out various calorimetric tests and investigates the boundary conditions of the fire with the help of fire reference packages. At the same time, we are conducting various fire scenarios with wood-filled impact limiters. Large-scale fire tests of impact limiters are carried out on a full scale as well as on a small scale. Influencing variables are investigated in particular by means of geometric changes and the consideration of artificial damages, in particular holes. In addition to propane fire as a heat source, thermal scenarios are also investigated with hydrogen as heat source and an infrared radiator system to ignite test specimens. For these numerous test arrangements, the transferability to existing and newly developed transport package designs is essential and fruitful within the review of design approvals, especially for Dual Purpose casks with a long-lasting operation time. T2 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 22) CY - Juan-les-Pins, France DA - 11.06.2023 KW - Fire Testing KW - Wood KW - Hydrogen KW - Fire Reference Test PY - 2023 AN - OPUS4-57722 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quercetti, Thomas A1 - Wille, Frank A1 - Neumann, Martin A1 - Linnemann, Konrad T1 - Full-scale drop testing with a heavy-weight package for radioactive waste T2 - Proceedings of the 20th International Symposium on the Packaging and Transportation of Radioactive Materials N2 - Packages for the transport of radioactive materials shall fulfil the requirements of the IAEA regulations for the safe transport. The requirements define mechanical and thermal test conditions including criteria ensuring the package design’s ability to withstand severe accidents and provide a high level of technical safety. Different methods can be used for safety demonstration showing compliance with the regulations. The central part of a safety demonstration which is presented in this paper was a comprehensive drop test program with a full-scale model of a transport package accompanied by pre- and post-test FE analyses. Using full-scale drop test models allow the benefit that similarity and scaling issues become a significant smaller issue, additional material investigations can be limited and analyses for transferring test results to the original package design are reduced. Additionally, experience for the future serial packaging manufacturing and handling procedures can be collected in a very early state of the design approval process. The pre-test finite element analyses derived and justified the drop test program consisting of several drop sequences with different drop orientations of the specimen. The performance and the results of the drop test sequences shows the manageability and the advantage e.g., in view of the direct availability of test results for the package licensing. On the other hand, the drop test performance shows the difficulties during handling and the need for additional equipment during preparation of the specimen. The package presented was intended for the transport and storage of compacted radioactive waste from reprocessing of spent nuclear fuel assemblies - designed and applied for approval by the AGC consortium. The project ended in 2021. The package design was characterized by a cask body made of a forged thick stainless-steel shell, a bolted double lid system with metallic gaskets and wood filled shock absorbers at both ends. The total mass of the entire transport package including content was 120,000 kg, the total length was about 7000 mm and the diameter approximately 3000 mm, both measures include the shock absorbers. The paper provides an insight into the performance of a full-scale drop testing campaign within the package safety evaluation and shows some selected test results. T2 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 22) CY - Juan-Les-Pins, France DA - 11.06.2023 KW - Full-scale KW - Drop testing KW - Package KW - Radioactive materials transport PY - 2023 SP - 1 EP - 10 AN - OPUS4-57732 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Cakir, Cafer Tufan A1 - Piotrowiak, T. A1 - Reinholz, Uwe A1 - Ludwig, A. A1 - Emmerling, Franziska A1 - Streli, C. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin T1 - Exploring the Depths of Corrosion: A Novel GE-XANES Technique for Investigating Compositionally Complex Alloys JF - Analytical Chemistry N2 - In this study, we propose the use of nondestructive, depth-resolved, element-specific characterization using grazing exit X-ray absorption near-edge structure spectroscopy (GE-XANES) to investigate the corrosion process in compositionally complex alloys (CCAs). By combining grazing exit X-ray fluorescence spectroscopy (GE-XRF) geometry and a pnCCD detector, we provide a scanning-free, nondestructive, depth-resolved analysis in a sub-micrometer depth range, which is especially relevant for layered materials, such as corroded CCAs. Our setup allows for spatial and energy-resolved measurements and directly extracts the desired fluorescence line, free from scattering events and other overlapping lines. We demonstrate the potential of our approach on a compositionally complex CrCoNi alloy and a layered reference sample with known composition and specific layer thickness. Our findings indicate that this new GE-XANES approach has exciting opportunities for studying surface catalysis and corrosion processes in real-world materials. KW - Degradation mechanisms KW - Grazin exit XANES KW - Depth resolved XANES KW - Compositional complex alloys KW - Corrosion PY - 2023 DO - https://doi.org/10.1021/acs.analchem.3c00404 VL - 95 SP - 4810 EP - 4818 PB - ACS Publications AN - OPUS4-57823 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Yusenko, Kirill A1 - Stawski, Tomasz A1 - Kulow, Anicó A1 - Cakir, Cafer Tufan A1 - Röder, Bettina A1 - Naese, Christoph A1 - Britzke, Ralf A1 - Sintschuk, Michael A1 - Emmerling, Franziska T1 - BAMline - A real-life sample materials research beamline JF - The Journal of Chemical Physics N2 - With increasing demand and environmental concerns, researchers are exploring new materials that can perform as well or better than traditional materials while reducing environmental impact. The BAMline, a real-life sample materials research beamline, provides unique insights into materials’ electronic and chemical structure at different time and length scales. The beamline specializes in x-ray absorption spectroscopy, x-ray fluorescence spectroscopy, and tomography experiments. This enables real-time optimization of material properties and performance for various applications, such as energy transfer, energy storage, catalysis, and corrosion resistance. This paper gives an overview of the analytical methods and sample environments of the BAMline, which cover non-destructive testing experiments in materials science, chemistry, biology, medicine, and cultural heritage. We also present our own synthesis methods, processes, and equipment developed specifically for the BAMline, and we give examples of synthesized materials and their potential applications. Finally, this article discusses the future perspectives of the BAMline and its potential for further advances in sustainable materials research. KW - Extended X-ray absorption fine structure KW - Energy storage KW - Environmental impacts KW - Nondestructive testing techniques KW - X-ray fluorescence spectroscopy KW - Corrosion KW - Near edge X-ray absorption fine structure spectroscopy KW - X-ray absorption spectroscopy PY - 2023 DO - https://doi.org/10.1063/5.0157194 VL - 158 IS - 24 SP - 1 EP - 22 PB - AIP Publishing AN - OPUS4-57824 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Förste, F. A1 - Bauer, L. A1 - Streeck, C. A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Kadow, D. A1 - Keil, C. A1 - Mantouvalou, I. T1 - Quantitative Analysis and 2D/3D Elemental Imaging of Cocoa Beans Using X‑ray Fluorescence Techniques JF - Analytical Chemistry N2 - As an important raw material for the confectionery industry, the cocoa bean (Theobroma cacao L.) has to meet certain legal requirements in terms of food safety and maximum contaminant levels in order to enter the cocoa market. Understanding the enrichment and distribution of essential minerals but also toxic metals is of utmost importance for improving the nutritional quality of this economically important raw food material. We present three X-ray fluorescence (XRF) techniques for elemental bio-imaging of intact cocoa beans and one additional XRF technique for quantitative analysis of cocoa pellets. The interrelation of all the methods presented gives a detailed picture of the content and 3D-resolved distribution of elements in complete cocoa beans for the first time. KW - BAMline KW - Synchrotron KW - XRF KW - CXC KW - Cocoa PY - 2023 DO - https://doi.org/10.1021/acs.analchem.2c05370 VL - 95 SP - 5627 EP - 5635 PB - ACS Publications AN - OPUS4-57832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schubert, Sven A1 - Reichardt, Adrian A1 - Müller, Lars A1 - Neumann, Martin A1 - Komann, Steffen A1 - Wille, Frank T1 - Introduction of the German ageing management guide for packages for transport of radioactive materials T2 - Proceedings of the 20th international symposium on the packaging and transportation of radioactive materials N2 - The consideration of ageing mechanisms is with integration of the new para 613A into IAEA SSR-6 (Rev. 1) now obligatory for the design of transport packages. In addition, para 809(f) requires for packages intended to be used for shipment after storage the consideration of the effects of ageing mechanisms during storage in safety analyses and the implementation of corresponding instructions for operation and maintenance. Para 503(e) requires that all packaging components and radioactive contents have been maintained during storage in a manner that all requirements specified in IAEA SSR-6 (Rev.1) and in the applicable certificates of approval have been fulfilled. The evaluation of ageing mechanisms and their effects including monitoring are part of BAM’s authority assessment tasks related to the mechanical and thermal package design and quality assurance aspects. BAM has compiled a guideline for the implementation of ageing assessment and of the measures for ageing management of the approval procedure based on requirements of IAEA SSR-6 (Rev.1). The guideline is applicable only for packages requiring a competent authority approval. The paper aims to describe the structure of the guideline and the general approach for ageing management requirements. The type and amount of measures for ageing management depend mainly on the use of the package and on the ageing effects for the component, which result from relevant ageing mechanisms during package operation time. The implementation of measures for ageing management is divided into three levels – systemic measures, package design related measures and documentation. The systemic measures are attributed to the general management system and define the whole activities for organization of ageing management like structure, responsibilities, documentation, reports and evaluation. The package design related measures are defined in an ageing management plan (AMP). These measures shall ensure that the anticipated changes of the package design under consideration of ageing effects still complies with the design approval specification. Therefore, an ageing surveillance program (ASP) and, if necessary, a gap analysis program shall be developed. The ageing management documentation (AMD) ensures the continuous documentation of the compliance of a specific package to the approved package design, comprising mainly records resulting from operation and surveillance. T2 - PATRAM22 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Juan-les-Pins, France DA - 11.06.2023 KW - Guide KW - Ageing KW - Mechanism KW - Package KW - Management PY - 2023 SP - 1 EP - 10 PB - World Nuclear Transport Institute (WNTI) CY - London AN - OPUS4-57770 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Babutzka, Martin A1 - Zekhnini, Khalid A1 - Seifert, Lando A1 - Le, Quynh Hoa A1 - Grabowski, Sven T1 - Schlussbericht zum Forschungsvorhaben „Verbundvorhaben: "KKS-Gründung" - Korrosionsmonitoring und aktiver kathodischer Korrosionsschutz von Offshore-Gründungsstrukturen - Teilvorhaben: Korrosionsprüfungen im Laborcontainer“ in der Fördermaßnahme „Anwendungsorientierte nichtnukleare FuE im 6. Energieforschungsprogramm“ im Förderbereich „Windenergie“ N2 - Das Ziel des Verbundforschungsvorhabens KKS-Gründung war die Entwicklung eines Monitoringsystems zur Erfassung von Korrosion an Gründungsstrukturen im Labormaßstab. Dafür war eine umfassende Bewertung und Beschreibung korrosionsbeeinflussender Faktoren und der Korrosionssysteme notwendig. Im Vorhaben KKS-Gründung wurde die Gründungsstruktur unterhalb der Wasserlinie betrachtet bis hin zum anaeroben Bereich im Sediment. Insbesondere der Sedimentbereich wurde bisher nur unzureichend betrachtet. Da die komplexen Mechanismen in der Sedimentzone noch nicht ausreichend wissenschaftlich untersucht wurden, mussten Möglichkeiten entwickelt werden, um diese zu bewerten. Im Verbundforschungsvorhaben KKS-Gründung agierte die Bundesanstalt für Materialforschung und -prüfung (BAM) als Forschungsstelle. Die Hauptziele des Teilvorhabens der BAM waren die Bereitstellung einer Messumgebung für das von den Partnern entwickelte Monitoringsystem, die umfassende wissenschaftliche Beschreibung der Korrosionssysteme im Unterwasserbereich und Sediment sowie die Gewinnung von Messdaten zur Verifizierung und Überführung in die Simulation. Als Forschungsstelle war die BAM der Ansprechpartner für die Verbundpartner bei wissenschaftlichen Fragestellungen. Die Hauptziele des Vorhabens wurden erreicht und es wurden grundlegende Erkenntnisse zum Korrosionsverhalten von Offshore-Stahl im Unterwasser und Sedimentbereich gewonnen. Darüber hinaus wurden wichtige Erkenntnisse zum Betrieb eines Laborcontainers und zur Nachstellung von Korrosionssystemen in Meerwasserbecken bei Verwendung von künstlichem Meerwasser und Sand als Sediment gewonnen. Eine Beschreibung und Bewertung der Korrosivität und ablaufender Reaktionen in den einzelnen Belastungszonen wurde mittels elektrochemischer und gravimetrischer Verfahren vorgenommen. KW - Korrosionsschutz KW - KKS KW - Korrosionsmonitoring KW - Offshore-Windenergieanlagen KW - Meerwasser KW - Sediment PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-569252 SP - 1 EP - 74 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-56925 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epperlein, Martin A1 - Hilgenberg, Kai A1 - Hellfritz, Benjamin A1 - Löffler, Frank T1 - Digitisation of the quality infrastructure - using the example of additive manufacturing T2 - Proceedings of the Metal Additive Manufacturing Conference 2023 N2 - Rapidly advancing technologies and progressive digitisation are posing challenges to the established quality infrastructure (QI). In response, the key stakeholders of the German QI established the initiative QI-Digital aimed at developing new solutions for modern quality assurance. One of the central use cases herein is quality assurance for additive manufacturing, in which a fully interlinked additive manufacturing process chain is established. The intention is to collect and process data from each production step, allowing for a comprehensive digital view of the physical material flow. Within this process chain, prototypes of digital QI tools like machine readable standards and digital quality certificates are being demonstrated, tested, and evolved. This is complemented by research on the process level, comprising the evaluation and refinement of methods for in-situ and ex-situ quality assurance, as well as algorithms for registration, reduction, and analysis of process data. This paper presents the status, goals, and vision for the QI-Digital use case additive manufacturing. T2 - Metal Additive Manufacturing Conference 2023 CY - Wien, Austria DA - 17.10.2023 KW - Additive Manufacturing KW - Digitalisation KW - Quality Assurance PY - 2023 SP - 96 EP - 104 CY - Wien AN - OPUS4-58628 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epperlein, Martin T1 - Digitisation of the quality infrastructure - Using the example of additive manufacturing N2 - Rapidly advancing technologies and progressive digitisation are posing challenges to the established quality infrastructure (QI). In response, the key stakeholders of the German QI established the initiative QI-Digital aimed at developing new solutions for modern quality assurance. One of the central use cases herein is quality assurance for additive manufacturing, in which a fully interlinked additive manufacturing process chain is established. The intention is to collect and process data from each production step, allowing for a comprehensive digital view of the physical material flow. Within this process chain, prototypes of digital QI tools like machine readable standards and digital quality certificates are being demonstrated, tested, and evolved. This is complemented by research on the process level, comprising the evaluation and refinement of methods for in-situ and ex-situ quality assurance, as well as algorithms for registration, reduction, and analysis of process data. This paper presents the status, goals, and vision for the QI-Digital use case additive manufacturing. T2 - Metal Additive Manufacturing Conference 2023 CY - Vienna, Austria DA - 17.10.2023 KW - Additive Manufacturing KW - Digitalisation KW - Quality Assurance PY - 2023 AN - OPUS4-58629 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dürig, Wiebke A1 - Lindblad, Sofia A1 - Golovko, Oksana A1 - Gkotsis, Georgios A1 - Aalizadeh, Reza A1 - Nika, Maria-Christina A1 - Thomaidis, Nikolaos A1 - Alygizakis, Nikiforos A. A1 - Plassmann, Merle A1 - Haglund, Peter A1 - Fu, Qiuguo A1 - Hollender, Juliane A1 - Chaker, Jade A1 - David, Arthur A1 - Kunkel, Uwe A1 - Macherius, André A1 - Belova, Lidia A1 - Poma, Giulia A1 - Preud'Homme, Hugues A1 - Munschy, Catherine A1 - Aminot, Yann A1 - Jaeger, Carsten A1 - Lisec, Jan A1 - Hansen, Martin A1 - Vorkamp, Katrin A1 - Zhu, Linyan A1 - Cappelli, Francesca A1 - Roscioli, Claudio A1 - Valsecchi, Sara A1 - Bagnati, Renzo A1 - González, Belén A1 - Prieto, Ailette A1 - Zuloaga, Olatz A1 - Gil-Solsona, Ruben A1 - Gago-Ferrero, Pablo A1 - Rodriguez-Mozaz, Sara A1 - Budzinski, Hélène A1 - Devier, Marie-Helene A1 - Dierkes, Georg A1 - Boulard, Lise A1 - Jacobs, Griet A1 - Voorspoels, Stefan A1 - Rüdel, Heinz A1 - Ahrens, Lutz T1 - What is in the fish? Collaborative trial in suspect and non-target screening of organic micropollutants using LC- and GC-HRMS JF - Environment International N2 - A collaborative trial involving 16 participants from nine European countries was conducted within the NORMAN network in efforts to harmonise suspect and non-target screening of environmental contaminants in whole fish samples of bream (Abramis brama). Participants were provided with freeze-dried, homogenised fish samples from a contaminated and a reference site, extracts (spiked and non-spiked) and reference sample preparation protocols for liquid chromatography (LC) and gas chromatography (GC) coupled to high resolution mass spectrometry (HRMS). Participants extracted fish samples using their in-house sample preparation method and/or the protocol provided. Participants correctly identified 9-69% of spiked compounds using LC-HRMS and 20-60% of spiked compounds using GC-HRMS. From the contaminated site, suspect screening with participants’ own suspect lists led to putative identification of on average ~145 and ~20 unique features per participant using LC-HRMS and GC-HRMS, respectively, while non-target screening identified on average ~42 and ~56 unique features per participant using LC-HRMS and GC-HRMS, respectively. Within the same sub-group of sample preparation method, only a few features were identified by at least two participants in suspect screening (16 features using LC-HRMS, 0 features using GC-HRMS) and non-target screening (0 features using LC-HRMS, 2 features using GC-HRMS). The compounds identified had log octanol/water partition coefficient (KOW) values ranging from -9.9 to 16 and mass-to-charge ratio (m/z) of 68 to 761 (LC-HRMS and GC-HRMS). A significant linear trend was found between log KOW and m/z for the GC-HRMS data. Overall, these findings indicate that differences in screening results are mainly due to the data analysis workflows used by different participants. Further work is needed to harmonise the results obtained when applying suspect and non-target screening approaches to environmental biota samples. KW - General Environmental Science KW - Suspect and non-target analysis KW - Biota KW - Expobome KW - Collaborative trial PY - 2023 DO - https://doi.org/10.1016/j.envint.2023.108288 VL - 181 SP - 1 EP - 24 PB - Elsevier B.V. AN - OPUS4-58681 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin A1 - Kromm, Arne A1 - Kannengießer, Thomas A1 - Dittmann, F. A1 - Varfolomeev, I. T1 - Hybrider Einsatz von LTT-Schweißzusatzwerkstoffen N2 - LTT (Low Transformation Temperature) - Schweißzusätze stellen eine Alternative zur Verfügung, um die Schwingfestigkeit in Schweißnähten zu erhöhen. Ziel dieses Vortages ist es zum einem die Thematik der LTT - Schweißzusätze, insbesondere in hybrider Ausführung zu erläutern, Zum anderen werden die Ergebnisse der Vorversuche präsentiert. T2 - BMDK CY - Magdeburg, Germany DA - 25.10.2023 KW - LTT (Low Transformation Temperature) KW - Martensitstarttemperatur KW - Baustähle KW - Eigenspannungen KW - Aufmischung PY - 2023 AN - OPUS4-58690 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Guerra, M.F. A1 - Martinón-Torres, M. A1 - Lemasson, Q. A1 - Moignard, B. A1 - Pacheco, C. A1 - Pichon, L. A1 - Macdonald, L. A1 - Hess, M. A1 - Tissot, I. ED - Guerra, M. F. ED - Martinón-Torres, M. ED - Quirke, S. T1 - Analytical approaches to Egyptian goldwork T2 - Ancient Egyptian gold: Archaeology and science in jewellery (3500–1000 bc) N2 - The structure and composition of ancient gold objects retain information about their long history of manufacture, from the exploitation of the ore to the finishing touches, as well as evidence of their use, deposition, and degradation. By developing an efficient analytical strategy, it is possible to retrieve that information. This chapter sets the necessary foundation 131to explore fully the analytical results presented in the following chapters of this volume. The techniques employed in the analyses of the Egyptian jewellery are described and the analytical parameters provided. For more established techniques, only brief introductions are presented, while more recent developments are presented in greater detail. KW - Gold KW - Synchrotron KW - D2XRF KW - Egypt PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-586039 DO - https://doi.org/10.17863/CAM.99681 SP - 131 EP - 191 AN - OPUS4-58603 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Buzanich, Ana A1 - Cakir, C.T. T1 - Enhancing efficiency at bamline: employing data science and machine learning for x-ray research N2 - This talk discusses how data science and machine learning techniques are being applied at the BAM Federal Institute for Materials Research and Testing to enhance efficiency and automation at the BAMLine synchrotron facility. The methods presented include Gaussian processes and Bayesian optimization for beamline adjustment and optimization of X-ray measurements. These statistical techniques allow automated alignment of beamline components and active learning scanning to reduce measurement time. Additional machine learning methods covered are neural networks for quantification of X-ray fluorescence (XRF) data and decoding coded apertures. T2 - 17th International Work-Conference on Artificial Neural Networks (IWANN2023) CY - Ponta Delgada, Portugal DA - 19.06.2023 KW - Bayesian Optimization KW - Gaussian Process KW - BAMline PY - 2023 AN - OPUS4-58605 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Radtke, Martin A1 - Guilherme Buzanich, Ana A1 - Cakir, C.T. A1 - Yusenko, Kirill A1 - Emmerling, Franziska T1 - Insights into materials with hard x-rays: capabilities of the bamline N2 - This contribution provides an overview of the BAMline synchrotron radiation beamline, which specializes in hard X-ray spectroscopy techniques for materials research. The BAMline offers X-ray absorption spectroscopy (XAS), x-ray fluorescence spectroscopy (XRF), and tomography to study materials' electronic structure, chemical composition, and structure. Key capabilities include standard and dispersive XAS for electronic structure, micro-XRF for elemental mapping, coded aperture imaging, and depth-resolved grazing exit XAS. The BAMline enables in situ characterization during materials synthesis and functions for energy, catalysis, corrosion, biology, and cultural heritage applications. Ongoing developments like the implementation of machine learning techniques for experiment optimization and data analysis will be discussed. For instance, Bayesian optimization is being used to improve beamline alignment and scanning. An outlook to the future, where the BAMline will continue pioneering dynamic and multi-scale characterization, aided by advanced data science methods, to provide unique insights into materials research, will be given. T2 - μ-XRF at Elettra 2.0: challenges and opportunities CY - Trieste, Italy DA - 11.09.2023 KW - Synchrotron KW - XRF KW - XANES KW - Bayes PY - 2023 AN - OPUS4-58607 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epperlein, Martin T1 - Eine digitale QI für die moderne Produktion: Datenbasierte Qualitätssicherung in der Additiven Fertigung N2 - Als Beispiel für moderne Produktion ist die additive Fertigung (ugs. „3D-Druck“) bei der Herstellung von hochkomplexen metallischen Bauteilen, bionisch inspiriertem Leichtbau oder Prototypen nicht mehr wegzudenken. Die Qualitätssicherung (QS) von Bauteilen für sicherheitskritische Anwendungen stellt jedoch noch eine Herausforderung dar. Die Additive Fertigung (AM) ist ein vergleichsweise junges und datenintensives Fertigungsverfahren. Daher ist es ideal geeignet, die neuen Werkzeuge einer digitalen Qualitätsinfrastruktur (QI) für die moderne Produktion zu erproben und weiterzuentwickeln. T2 - 2. QI-Digital Forum CY - Berlin, Germany DA - 10.10.2023 KW - Additive Manufacturing KW - Digitalisation KW - Quality Assurance PY - 2023 AN - OPUS4-58630 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Gleim, Tobias A1 - Wille, Frank T1 - Fire Reference Tests for Qualification of IAEA Fire N2 - A small cylindrical fire reference package was designed. A fire test setup was created using the fire reference package in accordance with IAEA standards. Four propane gas fire tests were conducted to determine heat fluxes into the fire reference package. The initial test setup was modified to create the final design of the fire test facility. This allowed for the heat flux to be adjusted to meet the regulatory IAEA fire qualification criteria. Furthermore, a numerical model of the fire reference package was created using boundary conditions derived from the experimental data. The simulation results demonstrated good agreement with the experimental data and provided additional insights. T2 - Technical Exchange IRSN – BAM Transport & Storage of Packages for Radioactive Material CY - Cadarache, France DA - 13.10.2022 KW - Fire KW - IAEA KW - Propane PY - 2022 AN - OPUS4-57251 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Wilrich, Cordula A1 - Schröder, Volkmar A1 - Brandes, E. A1 - Schmidt, Martin A1 - Wandrey, Peter-Andreas A1 - Mix, K.-H. A1 - Wehrstedt, Klaus-Dieter A1 - Bender, H. A1 - Stephan, U. A1 - Eberz, A. A1 - Steinbach, J. A1 - Stoessel, F. T1 - Plant and process safety - 2. Hazardous materials and process conditions T2 - Ullmann's encyclopedia of industrial chemistry N2 - "Ullmann's Encyclopedia of Industrial Chemistry" is the benchmark reference in chemistry and chemical and life science engineering, covering inorganic and organic chemicals, advanced materials, pharmaceuticals, polymers and plastics, metals and alloys, biotechnology and biotechnological products, food chemistry, process engineering and unit operations, analytical methods, environmental protection, and much more. The present article is part of the topic collection "Environmental Protection and Industrial Safety". It covers plant and process safety, focusing on hazardous materials and process conditions. KW - Flammable gases and vapors KW - Combustibility of liquids KW - Dust explosions KW - Explosive condensed substances KW - Harmful effects of substances KW - Exothermic and pressure-inducing chemical reactions PY - 2012 SN - 978-3-527-30673-2 DO - https://doi.org/10.1002/14356007.q20_q01 SP - 1 EP - 50 PB - Wiley-VCH CY - Weinheim AN - OPUS4-58108 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Peters, Stefan A1 - Kunkel, Benny A1 - Cakir, Cafer Tufan A1 - Kabelitz, Anke A1 - Witte, Steffen A1 - Bernstein, Thomas A1 - Bartling, Stephan A1 - Radtke, Martin A1 - Emmerling, Franziska A1 - Abdel-Mageed, Ali Mohamed A1 - Wohlrab, Sebastian A1 - Guilherme Buzanich, Ana T1 - Time-, space- and energy-resolved in situ characterization of catalysts by X-ray absorption spectroscopy JF - Chemical Communications N2 - A novel setup for dispersive X-ray absorption spectroscopy (XAS) with simultaneous resolution of space, time and energy for in situ characterization of solid materials is demonstrated. KW - Dispersive XAS KW - Catalysis KW - In situ KW - Structure analysis PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-584924 DO - https://doi.org/10.1039/d3cc03277a SN - 1359-7345 SP - 1 EP - 4 PB - Royal Society of Chemistry (RSC) AN - OPUS4-58492 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bell, Jérémy A1 - Climent, Estela A1 - Gotor, Raúl A1 - Tobias, Charlie A1 - Martin-Sanchez, Pedro M. A1 - Rurack, Knut T1 - Dipstick coated with polystyrene-silica core-shell particles for the detection of microbiological fuel contamination N2 - Microbial contamination of fuels by fungi or bacteria poses risks such as corrosion and fuel system fouling, which can lead to critical problems in refineries and distribution systems and has a significant economic impact at every stage of the process. Many factors have been cited as being responsible for microbial growth, like the presence of water in the storage tanks. In fact, only 1 % water in a storage system is sufficient for the growth of microorganisms like bacteria or yeasts, as well as for the development of fungal biomass at the oil/water interface. This work presents a rapid test for the accurate determination of genomic DNA from aqueous fuel extracts. The detection is based on the use of polystyrene-mesoporous silica core-shell particles onto which modified fluorescent molecular beacons are covalently grafted. These beacons contain in the hairpin loop a target sequence highly conserved in all bacteria, corresponding to a fragment of the 16S ribosomal RNA subunit. The designed single-stranded molecular beacon contained fluorescein as an internal indicator and a quencher in its proximity when not hybridized. Upon hybridization in presence of the target sequence, the indicator and the quencher are spatially separated, resulting in fluorescence enhancement. To perform the assay the developed particles were deposited on different glass fibre strips to obtain a portable and sensitive rapid test. The assays showed that the presence of genomic DNA extracts from bacteria down to 50–70 μg L–1 induced a fluorescence response. The optical read-out was adapted for on-site monitoring by fitting a 3D-printed case to a conventional smartphone, taking advantages of the sensitivity of the CMOS detector. Such embedded assembly enabled the detection of genomic DNA in aqueous extracts down to the mg L–1 range and represents an interesting step toward on-site monitoring of fuel contamination. T2 - IMA 2023 CY - Chania, Greece DA - 18.09.2023 KW - Teststreifen KW - Test strip KW - Microbial KW - Mikrobiell KW - Smartphone KW - Particles KW - Partikeln PY - 2023 AN - OPUS4-58526 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sänger, Johanna Christiane A1 - Schwentenwein, Martin A1 - Bermejo, Raúl A1 - Günster, Jens T1 - Hybridizing Lithography-Based Ceramic Additive Manufacturing with Two-Photon-Polymerization JF - Applied Sciences N2 - Stereolithography processes such as lithography-based ceramic manufacturing (LCM) are technologies that can produce centimeter-sized structures in a reasonable time frame. However, for some parts specifications, they lack resolution. Two-photon-polymerization (2PP) ensures the highest geometric accuracy in additive manufacturing so far. Nevertheless, building up parts in sizes as large as a few millimeters or even centimeters is a time-consuming process, which makes the production of 2PP printed parts very costly. Regarding feedstock specification, the requirements for 2PP are different to those for LCM, and generally, feedstocks are designed to meet requirements for only one of these manufacturing technologies. In an attempt to fabricate highly precise ceramic components of a rather large size, it is necessary to develop a feedstock that suits both light-based technologies, taking advantage of LCM’s higher productivity and 2PP’s accuracy. Hybridization should bring the desired precision to the region of interest on reasonably large parts without escalating printing time and costs. In this study, specimens gained from a transparent feedstock with yttria stabilized zirconia (YSZ) particles of 5 nm at 70 wt% were presented. The resin was originally designed to suit 2PP, while being also printable with LCM. This work demonstrates how hybrid parts can be sintered into full YSZ ceramics. KW - Additive Manufacturing KW - Transparent ceramic KW - Nano-powder PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-584541 DO - https://doi.org/10.3390/app13063974 SN - 2076-3417 VL - 13 IS - 6 SP - 1 EP - 9 PB - MDPI CY - Basel AN - OPUS4-58454 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin A1 - Kromm, Arne A1 - Kannengießer, Thomas A1 - Dittmann, F. A1 - Varfolomeev, I. T1 - Hybrid use of LTT welding filler N2 - Through a hybrid use of Low Transforamtion Temperature welding filler, fatigue strength of welds should be increased. Through the hybrid use of LTT welding filler the Integrity of a weld will be less affected. By creating several variants of LTT weld geometries an idea of the optimum residual stress reduction is given. T2 - European Academy of Wind Energy (EAWE) CY - Hannover, Germany DA - 06.09.2023 KW - Welding KW - LTT (Low Transformation Temperature) KW - Fatigue strength KW - High-strength steels KW - Residual stress PY - 2023 AN - OPUS4-58362 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Poka, Konstantin A1 - Merz, Benjamin A1 - Epperlein, Martin A1 - Hilgenberg, Kai T1 - Integration of the whole digital chain in a unique file for PBF-LB/M: practical implementation within a digital thread and its advantages T2 - Industrializing Additive Manufacturing Proceedings of AMPA2023 N2 - The industrialization of AM is only possible by creating synergy with the tools of Industry 4.0. The system technology of Powder Bed Fusion with Laser beam of Metals (PBF-LB/M) reached a level of high performance in terms of process stability and material spectrum in the past years. However, the digital process chain, starting from CAD via CAM and plant-specific compila-tion of the manufacturing file exhibits media disruptions. The consequence is a loss of metadata. A uniform data scheme of simulation for Design for Additive Manufacturing (DfAM), the PBF-LB/M process itself and quality assurance is currently not realized within industry. There is no entity in the common data flows of the process chains, that enables the integration of these functionalities. As part of the creation of a digital quality infrastructure in the QI-Digital pro-ject, an integration of the CAD/CAM chain is being established. The outcome is a file in an advanced commercially available format which includes all simula-tions and manufacturing instructions. The information depth of this file extends to the level of the scan vectors and allows the automatic optimization and holis-tic documentation. In addition, the KPI for the economic analysis are generated by compressing information into a unique file combined with the application of a digital twin. The implementation and advantages of this solution are demon-strated in a case study on a multi-laser PBF-LB/M system. A build job contain-ing a challenging geometry is thermally simulated, optimized, and manufac-tured. To verify its suitability for an Additive Manufacturing Service Platform (AMSP), the identical production file is transferred to a PBF-LB/M system of another manufacturer. Finally, the achieved quality level of the build job is evaluated via 3D scanning. This evaluation is carried out in the identical entity of the production file to highlight the versatility of this format and to integrate quality assurance data. T2 - Additive Manufacturing for Products and Applications 2023 CY - Lucerne, Switzerland DA - 11.09.2023 KW - Laser Powder Bed Fusion KW - Digital Twin KW - Data Integrity KW - Process Chain Integration KW - Computer Aided Manufacturing PY - 2023 SN - 978-3-031-42982-8 DO - https://doi.org/10.1007/978-3-031-42983-5_7 SN - 2730-9576 VL - 3 SP - 91 EP - 114 PB - Springer CY - Cham AN - OPUS4-58363 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Habib, Abdel Karim T1 - Unterfeuerung von Flüssigwasserstofftanks N2 - In einer Versuchsreihe im Realmaßstab wurden drei Flüssigwasserstofftanks (LH2) unterfeuert. Hierbei sollte unter anderem geklärt werden, ob es, analog zu druckverflüssigten Gasen, zu einem BLEVE (Boiling Liquid Expanding Vapor Cloud Explosion) kommen kann. Die Experimente wurden auf dem Testareal Wasserstoffsicherheit des Testgeländes Technische Sicherheit der Bundesanstalt für Materialforschung und -prüfung (BAM-TTS) im Rahmen einer Forschungskooperation zwischen der BAM und Gexcon, als Teil des SH2IFT-Programms durchgeführt. Es handelte sich um doppelwandige, vakuumisolierte Tanks von 1 m³ Volumen. Die zylindrischen Tanks unterschieden sich durch ihre Ausrichtung (horizontal oder vertikal) und das verwendete Isoliermaterial (Perlit oder Mehrschichtisolierung (MLI). Der Füllgrad der Tanks betrug bei jedem der durchgeführten Tests etwa 35-40 %. Die Brandlast wurde homogen durch ein propangasbetriebenes Brennersystem erzeugt. Gemessen wurden die Bedingungen im Behälter (Temperaturen und Druck) sowie äußere Randbedingungen und Auswirkungen beim Versagen (Wärmestrahlung, Druckwellen, Flammenballentwicklung und Fragmentierung). Mit Bolometern wurde die Wärmestrahlung gemessen, die sowohl durch das Propanfeuer als auch durch einen möglichen Feuerball/BLEVE erzeugt wurde. Zur Messung der durch das Bersten von Behältern/BLEVEs erzeugten Druckwellen wurden sog. Pencil-Probes verwendet. Des Weiteren wurden mehrere Kameras zur Überwachung der Experimente eingesetzt: Normalbildkameras, Infrarot (IR)-Kameras und Hochgeschwindigkeitskameras, sowohl bodengestützt als auch mittels einer Drohne. Zwei der untersuchten Tanks, ein horizontaler und der vertikale, die beide mit Perlit isoliert waren, hielten der Brandbelastung stand, ohne dass es zu einem Behälterversagen kam. Der mit MLI isolierte horizontale Behälter barst nach 1 Stunde und 6 Minuten und erzeugte dabei einen Feuerball, Trümmerflug und eine Druckwelle. Neben der Beschreibung der Auswirkungen eines kritischen Versagens eines LH2-Tanks sind weitere Ziele der Arbeit die Identifizierung kritischer Behälterzustände sowie die Erstellung eines umfassendes Datensatzes der Trümmer des geborstenen Tanks. Die größten Abstände für kritische Abstände ergaben sich durch Fragmentwurf. Hier sollen 3D-Scans für die Verwendung in CAD und FEM Anwendungen bereitgestellt werden. Umfassende Daten zu den Fragmentwurfweiten, - massen und -positionen wurden bereits publiziert. Damit soll die Voraussetzung geschaffen werden, um vorhandene Wurfweitenmodelle, die bisher nur für einschalige Behälter konzipiert wurden auf ihre Eignung für mehrschalige Behälter zu überprüfen oder mögliche Anpassungen anhand der realen Daten vornehmen zu können. Zudem wurde damit begonnen die nicht geborstenen Tanks zu vermessen und zu zerlegen, um u.a. die Perlit-Schüttung auf Beeinträchtigungen durch den Transport und die Unterfeuerung zu untersuchen. T2 - Magdeburg-Köthener Brandschutz- und Sicherheitstagung 2024 CY - Magdeburg, Germany DA - 14.03.2024 KW - LH2 KW - BLEVE KW - Bersten KW - Tank KW - Unterfeuerung PY - 2024 AN - OPUS4-59715 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Selbstentzündung von Biokohlen – Lager- und Transportsicherheit N2 - Mit der Abkehr von der Nutzung fossiler Rohstoffe rücken regenerative Energieträger immer weiter in den Focus. Neben klassischen Holzkohlen werden verstärkt so genannte Biokohlen produziert. Dieser Begriff findet Verwendung für mit Hilfe verschiedener Verfahren karbonisierte pflanzliche, tierische oder mikrobielle Ausgangsstoffe. Diese Kohlen werden zum Teil über weite Strecken zum Bestimmungsort transportiert (Überseetransporte) oder vor Verwendung für längere Zeit gelagert. Häufig zeigen diese Kohlen ein kritisches Selbstentzündungsverhalten, wobei Einstufungstests (UN N.4 Test) versagen können. Ein negatives Testergebnis des UN N.4 Tests führte dabei in der Vergangenheit zur Nichteinstufung als selbsterhitzungsfähiger Stoff; in der Praxis entzündeten sich aber bereits vergleichsweise kleine Schüttungen (einige m³), z. B. beim Seetransport in Containern. Der Artikel geht auf dieses Problem ein und stellt Prüfverfahren vor. Aus den Ergebnissen durchgeführter Untersuchungen werden Empfehlungen für sicheren Transport und Lagerung abgeleitet. T2 - Magdeburg-Köthener Brandschutz- und Sicherheitstagung CY - Magdeburg, Germany DA - 14.03.2024 KW - Biokohlen KW - Selbstentzündung KW - Gefahrguteinstufung PY - 2024 AN - OPUS4-59718 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Gleim, Tobias A1 - Wille, Frank T1 - Evaluation of Heat Fluxes in Fire Reference Test Conducted in BAM Propane Gas Fire Test Facility N2 - Packages for the transport of intermediate- and high-level radioactive waste are designed to withstand severe accidents. The International Atomic Energy Agency (IAEA) has established specific mechanical and thermal tests. Packages for the transport of radioactive material must withstand these tests to comply with the Regulations for the Safe Transport of Radioactive Materials IAEA [IAEA (2018)]. A fire reference package was developed with the primary objective to demonstrate that the fire meets the regulatory requirements. Another aim is to characterise the boundary conditions of the actual fire as input parameters for thermo-mechanical simulations. A simple method to characterise the boundary conditions of a real steady state fire with a fire reference package is presented. The thermal test mainly consists of a 30 minute fully engulfing 800°C pool fire or an equally severe fire, such as a propane gas fire. The fire reference tests are performed prior to the actual fire test with the real package. The heat fluxes into the package depend substantially on the fire characteristics and the surface temperature of the package. To investigate local and overall heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for repeated use. The fire reference package presented in this paper represents the outer geometry of a small transport container for radioactive material and is used as a device in civil engineering. It is designed as a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 182 mm and a diameter of 102 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Open-air fire tests were performed in a BAM propane gas fire test facility with the fire reference package. The measured temperatures are used to determine the changes of heat fluxes into the fire reference package in relation to the package surface temperature. The calculated heat fluxes allow its fitting to express the thermal exposure as simple mathematical boundary condition. Therefore, in a first approach, fire properties such as adiabatic surface temperature (AST) as proposed by Wickström et al. (2007), convection coefficient and emissivity are determined mathematically fitting the heat flux development presented in this paper. The evaluated results provide an initial picture of local fire characteristics of the conducted propane gas fire and are a further development of previous works from Feldkamp et al. (2020). The results can be used in thermal and thermo-mechanical models to simulate the load on the real transport package in fire. The test shows that the examined propane gas fire covers the IAEA-fire over a wide range of surface temperatures with the chosen test stand parameters. T2 - SMiRT 27 (27th conference on Structural Mechanics in Reactor Technology) CY - Yokohama, Japan DA - 03.03.2024 KW - Fire KW - Propane KW - Fire Reference Test PY - 2024 AN - OPUS4-59680 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Habib, Abdel Karim A1 - van Wingerden, Kees ED - Beyer, Michael ED - Lucassen, Arnas T1 - Large-scale tests to investigate the consequences of exposing cryogenic storage vessels containing liquid hydrogen to a fire load T2 - Proceedings of the 14th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions N2 - Large Scale Experiments have been performed to determine whether a storage vessel containing liquid hydrogen (LH2) and caught in a fire engulfing the vessel can result in a BLEVE (Boiling Liquid Expanding Vapour Explosion) and if so its consequences. The tests were performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) in Germany at the Hydrogen Test Area (H2TA) within a research cooperation between BAM and Gexcon as part of the SH2IFT program. Three tests were performed using double-walled vacuum insulated vessels of 1 m3 volume. The cylindrical Vessels differed in orientation (horizontal or vertical) and the insulation material used (perlite or multi-layer insulation (MLI)). The degree of filling of the vessels was approximately 35-40 % in each of the tests performed. The fire load was provided by a propane fed burner-system positioned under the storage vessel and designed to give a homogeneous fire load. The conditions in the vessel (temperatures and pressure) as well as external effects (heat radiation, blast waves, flame ball development and fragmentation) were measured. All vessels were equipped with K-type thermocouples at several locations at the inner and outer vessel shell. The pressure inside the inner vessel and in the space between the inner and outer vessels (vacuum pressure) was measured. Bolometers were used to measure the heat radiation generated by both the propane fire and that generated by a possible fireball/BLEVE. To measure blast generated by the vessel burst/BLEVEs blast pencils were positioned at up to three locations. Further several cameras were used to monitor the events: normal cameras, infrared (IR)-cameras, high-speed cameras also on board of an UAV. Two of these vessels, a horizontal and a vertical vessel both insulated with perlite withstood the fire loading for 1 hour 20 minutes and 4 hours respectively without catastrophic failure. A horizontal vessel insulated with MLI failed by bursting after 1 hour and 6 minutes resulting in a fireball, fragments, and blast wave. T2 - 14th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions CY - Braunschweig, Germany DA - 11.07.2022 KW - Prevention KW - Industrial explosions KW - BLEVE KW - LH2 KW - Fire ball KW - Fragments PY - 2022 DO - https://doi.org/10.7795/810.20221124 SP - 168 EP - 181 AN - OPUS4-59440 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habib, Abdel Karim A1 - Kluge, Martin A1 - van Wingerden, Kees ED - Beyer, Michael ED - Lucassen, Arnas T1 - Experimental investigation into the consequences of release of liquified hydrogen onto and under water T2 - Proceedings of the 14th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions N2 - Large-scale experiments have been performed to investigate the possible consequences of realistic amounts of liquified hydrogen (LH2) encountering water. The experiments aimed at simulating an accidental release of LH2 during especially the fuelling of a ship. For liquified natural gas (LNG) it has been demonstrated that when spilled onto water the evaporation rate can be that high that physical explosions occur which are referred as rapid phase transitions (RPTs). It cannot be excluded that RPTs are also possible in the case of LH2. The tests were performed in a 10 m x 10 m x 1.5 m basin filled with water, at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) in Horstwalde, Germany within a research cooperation between BAM and Gexcon as part of the SH2IFT program. LH2 releases were established releasing directly from a trailer carrying LH2 through a long flexible double vacuum insulated transfer line. The releases occurred from a height of 50 cm above and 30 cm under the water surface both pointing downwards and 30 cm under the water surface pointing along the water surface too. The release rate was determined based on the weight loss rate of the road tanker which was placed onto load cells. Special blast pressure sensors were used to measure the shock waves generated by the release processes both in the water and in the air. At several locations the gas concentration was measured. Heat radiation was measured at 3 distances from the point of release. High speed, Infrared (IR) and normal cameras were used to record events and to follow the gas cloud behaviour in time. This includes cameras mounted on a UAV and underwater cameras. Two weather stations were used to measure wind speed, wind direction, temperature and humidity during all tests performed. All investigated release configurations resulted in a very chaotic LH2-water mixing zone, causing considerable evaporation but only minor over pressures. The main phenomenon observed was an ignition of the released gas cloud, resulting in significant blast wave overpressures and heat radiation to the surroundings. The location of the ignition occurred in free air at some distance from the instrumentation and release location. T2 - 14th International Symposium on Hazards, Prevention and Mitigation of Industrial Explosions (ISHPMIE 2022) CY - Braunschweig, Germany DA - 11.07.2022 KW - LH2 KW - RPT KW - Release KW - Gas cloud explosion KW - Heat radiation PY - 2022 SP - 182 EP - 196 AN - OPUS4-59441 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Selbstentzündung von Biokohlen – Lager- und Transportsicherheit T2 - Tagungsband Magdeburg-Köthener Brandschutz- und Sicherheitstagung N2 - Mit der Abkehr von der Nutzung fossiler Rohstoffe rücken regenerative Energieträger immer weiter in den Focus. Neben klassischen Holzkohlen werden verstärkt so genannte Biokohlen produziert. Dieser Begriff findet Verwendung für mit Hilfe verschiedener Verfahren karbonisierte pflanzliche, tierische oder mikrobielle Ausgangsstoffe. Diese Kohlen werden zum Teil über weite Strecken zum Bestimmungsort transportiert (Überseetransporte) oder vor Verwendung für längere Zeit gelagert. Häufig zeigen diese Kohlen ein kritisches Selbstentzündungsverhalten, wobei Einstufungstests (UN N.4 Test) versagen können. Ein negatives Testergebnis des UN N.4 Tests führte dabei in der Vergangenheit zur Nichteinstufung als selbsterhitzungsfähiger Stoff; in der Praxis entzündeten sich aber bereits vergleichsweise kleine Schüttungen (einige m³), z. B. beim Seetransport in Containern. Der Artikel geht auf dieses Problem ein und stellt Prüfverfahren vor. Aus den Ergebnissen durchgeführter Untersuchungen werden Empfehlungen für sicheren Transport und Lagerung abgeleitet. T2 - Magdeburg-Köthener Brandschutz- und Sicherheitstagung CY - Magdeburg, Germany DA - 14.03.2024 KW - Biokohlen KW - Selbstentzündung KW - Gefahrguteinstufung PY - 2024 SN - 978-3-948749-41-5 SP - 68 EP - 77 PB - Otto-von-Guericke-Universität Magdeburg CY - Magdeburg AN - OPUS4-59717 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Habib, Abdel Karim A1 - van Wingerden, Kees T1 - Unterfeuerung von Flüssigwassersttofftanks - Topologie eines kritischen Behälterversagens T2 - Konferenzband Magdeburg-Köthener Brandschutz- und Sicherheitstagung 2024 N2 - In einer Versuchsreihe im Realmaßstab wurden drei Flüssigwasserstofftanks (LH2) unterfeuert. Hierbei sollte unter anderem geklärt werden, ob es, analog zu druckverflüssigten Gasen, zu einem BLEVE (Boiling Liquid Expanding Vapor Cloud Explosion) kommen kann. Die Experimente wurden auf dem Testareal Wasserstoffsicherheit des Testgeländes Technische Sicherheit der Bundesanstalt für Materialforschung und -prüfung (BAM-TTS) im Rahmen einer Forschungskooperation zwischen der BAM und Gexcon, als Teil des SH2IFT-Programms durchgeführt. Es handelte sich um doppelwandige, vakuumisolierte Tanks von 1 m³ Volumen. Die zylindrischen Tanks unterschieden sich durch ihre Ausrichtung (horizontal oder vertikal) und das verwendete Isoliermaterial (Perlit oder Mehrschichtisolierung (MLI). Der Füllgrad der Tanks betrug bei jedem der durchgeführten Tests etwa 35-40 %. Die Brandlast wurde homogen durch ein propangasbetriebenes Brennersystem erzeugt. Gemessen wurden die Bedingungen im Behälter (Temperaturen und Druck) sowie äußere Randbedingungen und Auswirkungen beim Versagen (Wärmestrahlung, Druckwellen, Flammenballentwicklung und Fragmentierung). Mit Bolometern wurde die Wärmestrahlung gemessen, die sowohl durch das Propanfeuer als auch durch einen möglichen Feuerball/BLEVE erzeugt wurde. Zur Messung der durch das Bersten von Behältern/BLEVEs erzeugten Druckwellen wurden sog. Pencil-Probes verwendet. Des Weiteren wurden mehrere Kameras zur Überwachung der Experimente eingesetzt: Normalbildkameras, Infrarot (IR)-Kameras und Hochgeschwindigkeitskameras, sowohl bodengestützt als auch mittels einer Drohne. Zwei der untersuchten Tanks, ein horizontaler und der vertikale, die beide mit Perlit isoliert waren, hielten der Brandbelastung stand, ohne dass es zu einem Behälterversagen kam. Der mit MLI isolierte horizontale Behälter barst nach 1 Stunde und 6 Minuten und erzeugte dabei einen Feuerball, Trümmerflug und eine Druckwelle. Neben der Beschreibung der Auswirkungen eines kritischen Versagens eines LH2-Tanks sind weitere Ziele der Arbeit die Identifizierung kritischer Behälterzustände sowie die Erstellung eines umfassendes Datensatzes der Trümmer des geborstenen Tanks. Die größten Abstände für kritische Abstände ergaben sich durch Fragmentwurf. Hier sollen 3D-Scans für die Verwendung in CAD und FEM Anwendungen bereitgestellt werden. Umfassende Daten zu den Fragmentwurfweiten, -massen und -positionen wurden bereits publiziert. Damit soll die Voraussetzung geschaffen werden, um vorhandene Wurfweitenmodelle, die bisher nur für einschalige Behälter konzipiert wurden auf ihre Eignung für mehrschalige Behälter zu überprüfen oder mögliche Anpassungen anhand der realen Daten vornehmen zu können. Zudem wurde damit begonnen die nicht geborstenen Tanks zu vermessen und zu zerlegen, um u.a. die Perlit-Schüttung auf Beeinträchtigungen durch den Transport und die Unterfeuerung zu untersuchen. T2 - Magdeburg-Köthener Brandschutz- und Sicherheitstagung 2024 CY - Magdeburg, Germany DA - 14.03.2024 KW - LH2 KW - Flüssigwasserstoff KW - Bleve KW - Tank KW - Bersten KW - Unterfeuerung PY - 2024 SN - 978-3-948749-42-2 SP - 117 EP - 126 CY - Magdeburg AN - OPUS4-59711 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Habib, Abdel Karim A1 - Kluge, Martin A1 - van Wingerden, Kees T1 - Untersuchung der Freisetzung von Flüssigwasserstoff auf und unter Wasser T2 - Konferenzband Magdeburg-Köthener Brandschutz- und Sicherheitstagung 2024 N2 - In einer Reihe von Experimenten wurden die möglichen Folgen der Freisetzung von verflüssigtem Wasserstoff (LH2) auf, bzw. unter Wasser untersucht. Die Experimente zielten darauf ab, eine unbeabsichtigte Freisetzung von LH2 (z.B. durch Schlauchabriss) insbesondere bei der Betankung eines Schiffes zu simulieren. Für verflüssigtes Erdgas (LNG) wurden dabei sog. RPT’s (rapid phase transition) nachgewiesen, bei denen die spontane Verdampfung relevante Druckwellen erzeugt. Es kann nicht ausgeschlossen werden, dass RPTs auch im Falle von LH2 möglich sind. Die Versuche wurden auf dem Testareal Wasserstoffsicherheit auf dem Testgelände Technische Sicherheit der Bundesanstalt für Materialforschung und -prüfung (BAM-TTS) in Horstwalde, im Rahmen einer Forschungskooperation zwischen der BAM und Gexcon im Rahmen des SH2IFT-Programms durchgeführt. Die LH2-Freisetzungen erfolgten direkt aus einem LH2-Tanklastwagen über eine lange, flexible, vakuumisolierte Transferleitung. Während die Freisetzung oberhalb und unterhalb der Wasseroberfläche jeweils vertikal orientiert war, wurde bei der Unterwasserfreisetzung zusätzlich eine horizontale Ausströmung, parallel zur Wasseroberfläche realisiert. Zur Bestimmung des Massenstromes, wurde ein Wägesystem unter dem Tankwagen eingesetzt. Spezielle Drucksensoren wurden verwendet, um die durch die Freisetzungsvorgänge erzeugten Stoßwellen sowohl im Wasser als auch in der Luft zu messen. Die Gaskonzentrationen über dem Wasserbecken wurden an verschiedenen Positionen gemessen. Hochgeschwindigkeits-, Infrarot- (IR) und normale Kameras wurden eingesetzt, um die Phänomenologie der Freisetzung aufzuzeichnen und das Verhalten der Gaswolke im Zeitverlauf zu verfolgen. Neben den fest installierten Systemen an Land, kamen auch Unterwasserkameras sowie eine Drohne mit Normal- und IR-Kameras zum Einsatz. Zwei Wetterstationen wurden zur Messung von Windgeschwindigkeit, Windrichtung, Temperatur und Luftfeuchtigkeit während aller durchgeführten Tests eingesetzt. Des Weiteren kamen Bolometer zur Wärmestrahlungsmessung zum Einsatz. Zwar führten die Freisetzung zu einer hochturbulenten LH2/Wasser Mischzone, jedoch zu keinen nennenswerten Überdrücken durch RPT. Im Gegensatz dazu wurde unerwartet, aber reproduzierbar, eine Zündung der Gaswolke in freier Luft in einiger Entfernung von den Instrumenten und dem Ort der Freisetzung beobachtet. Die daraus resultierenden Gaswolkenexplosionen führten zu relevanten Überdrücken und zur Wärmeabstrahlung in die Umgebung. T2 - Magdeburg-Köthener Brandschutz- und Sicherheitstagung 2024 CY - Magdeburg, Germany DA - 14.03.2024 KW - Flüssigwasserstoff KW - LH2 KW - Freisetzung KW - RPT KW - Gaswolkenexplosion PY - 2024 SN - 978-3-948749-42-2 SP - 127 EP - 136 CY - Magedburg AN - OPUS4-59709 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Emamverdi, Farnaz A1 - Huang, J. A1 - Mosane Razavi, Negar A1 - Bojdys, M. J. A1 - Forster, A. B. A1 - Budd, P. M. A1 - Böhning, Martin A1 - Schönhals, Andreas T1 - Molecular Mobility and Gas Transport Properties of Mixed Matrix Membranes Based on PIM‑1 and a Phosphinine Containing Covalent Organic Framework JF - Macromolecules N2 - Polymers with intrinsic microporosity (PIMs) are gaining attention as gas separation membranes. Nevertheless, they face limitations due to pronounced physical aging. In this study a covalent organic framework containing λ5-phosphinine moieties, CPSF-EtO were incorporated as a nanofiller (concentration range 0-10 wt%) into a PIM-1 matrix forming dense films with a thickness of ca. 100 μm. The aim of the investigation was to investigate possible enhancements of gas transport properties and mitigating effects on physical aging. The incorporation of the nanofiller occurred on aggregate level with domains up to 100 nm as observed by T-SEM and confirmed by X-ray scattering. Moreover, the X-ray data show that the structure of the microporous network of the PIM-1 matrix is changed by the nanofiller. As the molecular mobility is fundamental for gas transport as well as for physical aging, the study includes dielectric investigations of pure PIM-1 and PIM-1/CPSF-EtO mixed matrix membranes to establish a correlation between the molecular mobility and the gas transport properties. Using the time-lag method the gas permeability and the permselectivity were determined for N2, O2, CH4 and CO2 for samples with variation in filler content. A significant increase in the permeability of CH4 and CO2 (50 % increase compared to pure PIM-1) was observed for a concentration of 5 wt% of the nanofiller. Furthermore, the most pronounced change in the permselectivity was found for the gas pair CO2/N2 at a filler concentration of 7 wt%. KW - Polymers of Intrinsic Microporosity KW - Nanocomposites PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-595031 DO - https://doi.org/10.1021/acs.macromol.3c02419 SN - 0024-9297 VL - 57 IS - 4 SP - 1829 EP - 1845 PB - ACS Publications AN - OPUS4-59503 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Prabitz, Konstantin Manuel A1 - Antretter, Thomas A1 - Rethmeier, Michael A1 - El-Sari, Bassel A1 - Schubert, Holger A1 - Hilpert, Benjamin A1 - Gruber, Martin A1 - Sierlinger, Robert A1 - Ecker, Werner T1 - Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds JF - Welding in the World N2 - Zinc-based surface coatings are widely applied with high-strength steels in automotive industry. Some of these base materials show an increased brittle cracking risk during loading. It is necessary to examine electrogalvanized and uncoated samples of a high strength steel susceptible to liquid metal embrittlement during spot welding with applied external load. Therefore, a newly developed tensile test method with a simultaneously applied spot weld is conducted. A fully coupled 3D electrical, thermal, metallurgical and mechanical finite element model depicting the resistant spot welding process combined with the tensile test conducted is mandatory to correct geometric influences of the sample geometry and provides insights into the sample’s time dependent local loading. With increasing external loads, the morphology of the brittle cracks formed is affected more than the crack depth. The validated finite element model applies newly developed damage indicators to predict and explain the liquid metal embrittlement cracking onset and development as well as even ductile failure. KW - Resistance spot welding KW - Finite element simulation KW - Advanced high-strength steel KW - Liquid metal embrittlement KW - Damage prediction KW - Tensile resistance spot welding experiment PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-594848 DO - https://doi.org/10.1007/s40194-024-01696-7 SN - 0043-2288 SP - 1 EP - 10 PB - Springer Science and Business Media LLC AN - OPUS4-59484 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Selbstentzündungsverhalten von Holz- und Biokohlen Gefahrguteinstufung sicher? N2 - Mit der Abkehr von der Nutzung fossiler Rohstoffe rücken regenerative Energieträger immer weiter in den Focus. Neben klassischen Holzkohlen werden verstärkt so genannte Biokohlen produziert. Dieser Begriff findet Verwendung für mit Hilfe verschiedener Verfahren karbonisierte pflanzliche, tierische oder mikrobielle Ausgangsstoffe. Diese Kohlen werden zum Teil über weite Strecken zum Bestimmungsort transportiert (Überseetransporte) oder vor Verwendung für längere Zeit gelagert. Häufig zeigen diese Kohlen ein kritisches Selbstentzündungsverhalten, wobei Einstufungstests (UN N.4 Test) versagen können. Ein negatives Testergebnis des UN N.4 Tests führte dabei in der Vergangenheit zur Nichteinstufung als selbsterhitzungsfähiger Stoff; in der Praxis entzündeten sich aber bereits vergleichsweise kleine Schüttungen (einige m³), z. B. beim Seetransport in Containern. Der Artikel geht auf dieses Problem ein, stellt Prüfverfahren vor und gibt Empfehlungen für sicheren Transport und Lagerung. T2 - VDI Fachtagung "Sichere Handhabung brennbarer Stäube CY - Nürnberg, Germany DA - 25.10.2023 KW - Biokohle KW - Selbstentzündung KW - Gefahrguteinstufung PY - 2023 AN - OPUS4-59597 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Schmidt, Martin T1 - Selbstentzündungsverhalten von Biokohlen - Gefahrguteinstufung immer sicher? T2 - VDI-Berichte 2424 N2 - Mit der Abkehr von der Nutzung fossiler Rohstoffe rücken regenerative Energieträger immer weiter in den Focus. Neben klassischen Holzkohlen werden verstärkt so genannte Biokohlen produziert. Dieser Begriff findet Verwendung für mit Hilfe verschiedener Verfahren karbonisierte pflanzliche, tierische oder mikrobielle Ausgangsstoffe. Diese Kohlen werden zum Teil über weite Strecken zum Bestimmungsort transportiert (Überseetransporte) oder vor Verwendung für längere Zeit gelagert. Häufig zeigen diese Kohlen ein kritisches Selbstentzündungsverhalten, wobei Einstufungstests (UN N.4 Test) versagen können. Ein negatives Testergebnis des UN N.4 Tests führte dabei in der Vergangenheit zur Nichteinstufung als selbsterhitzungsfähiger Stoff; in der Praxis entzündeten sich aber bereits vergleichsweise kleine Schüttungen (einige m³), z. B. beim Seetransport in Containern. Der Artikel geht auf dieses Problem ein, stellt Prüfverfahren vor und gibt Empfehlungen für sicheren Transport und Lagerung. KW - Biokohlen KW - Selbstentzündung KW - Gefahrguteinstufung PY - 2023 SN - 978-3-18-092424-3 SN - 978-3-18-092424-9 SN - 0083-5560 SP - 143 EP - 153 PB - VDI Verlag GmbH CY - Düsseldorf AN - OPUS4-59598 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schmidt, Martin T1 - Holzkohlen im Seeverkehr - Selbstentzündung vermeiden, sichere Beförderungsbedingungen schaffen N2 - Mit der Abkehr von der Nutzung fossiler Rohstoffe rücken regenerative Energieträger immer weiter in den Focus. Neben klassischen Holz- und Pflanzenkohlen werden verstärkt so genannte Biokohlen produziert. Dieser Begriff findet Verwendung für mit Hilfe verschiedener Verfahren karbonisierte pflanzliche, tierische oder mikrobielle Ausgangsstoffe. Diese Kohlen werden zum Teil über weite Strecken zum Bestimmungsort transportiert (Überseetransporte) oder vor Verwendung für längere Zeit gelagert. Häufig zeigen diese Kohlen ein kritisches Selbstentzündungsverhalten, wobei Einstufungstests (UN N.4 Test) versagen können. Ein negatives Testergebnis des UN N.4 Tests führte dabei in der Vergangenheit zur Nichteinstufung als selbsterhitzungsfähiger Stoff; in der Praxis entzündeten sich aber bereits vergleichsweise kleine Schüttungen (einige m³), z. B. beim Seetransport in Containern. Ergebnisse eines Projektes zur systematischen Untersuchung verschiedener Pflanzenkohlen werden vorgestellt. T2 - Internationale Gefahrgut-Tage CY - Hamburg, Germany DA - 26.02.2024 KW - Holzkohlen KW - Pflanzenkohlen KW - Selbstentzündung KW - Gefahrguteinstufung KW - Schiffsbrände PY - 2024 AN - OPUS4-59599 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kluge, Martin A1 - Habib, Karim T1 - Consequences of exposing cryogenic storage vessels containing liquid hydrogen to a fire load N2 - Within a research cooperation between BAM and Gexcon as part of the SH2IFT program, large scale experiments have been performed at the Test Site Technical Safety of the Bundesanstalt für Materialforschung und –prüfung (BAM) to determine the hazards emerging from a vacuum insulated cryogenic storage vessel containing liquified hydrogen (LH2) is caught in a fire engulfing it. T2 - ELVHYS, 2nd Safety Workshop CY - Online meeting DA - 29.11.2023 KW - BLEVE KW - Cryoegenic storage vessel KW - Liquified hydrogen PY - 2023 AN - OPUS4-59021 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Inostroza, Manuel A1 - Fernandez, Bárbara A1 - Aguilera, Felipe A1 - Layana, Susana A1 - Walter, Thomas R. A1 - Zimmer, Martin A1 - Rodríguez-Díaz, Augusto A1 - Oelze, Marcus T1 - Physical and chemical characteristics of active sulfur flows observed at Lastarria volcano (northern Chile) in January 2019 JF - Frontiers in Earth Science N2 - Molten sulfur is found in various subaerial volcanoes. However, limited records of the pools and flows of molten sulfur have been reported: therefore, questions remain regarding the physicochemical processes behind this phenomenon. A suite of new sulfur flows, some of which active, was identified at the Lastarria volcano (northern Chile) and studied using satellite imagery, in situ probing, and temperature and video recording. This finding provides a unique opportunity to better understand the emplacement mechanisms and mineral and chemical compositions of molten sulfur, in addition to gaining insight into its origin. Molten sulfur presented temperatures of 124–158°C, with the most prolonged sulfur flow reaching 12 m from the source. Photogrammetric tools permitted the identification of levees and channel structures, with an estimated average flow speed of 0.069 m/s. Field measurements yielded a total volume of 1.45 ± 0.29 m3 of sulfur (equivalent to ∼2.07 tons) mobilized during the January 2019 event for at least 408 min. Solidified sulfur was composed of native sulfur with minor galena and arsenic- and iodine-bearing minerals. Trace element analysis indicated substantial enrichment of Bi, Sb, Sn, Cd, as well as a very high concentration of As (&gt;40.000 ppm). The January 2019 molten sulfur manifestations in Lastarria appear to be more enriched in As compared to the worldwide known volcanoes with molten sulfur records, such as the Shiretoko-Iozan and Poás volcanoes. Furthermore, their rheological properties suggest that the “time of activity” in events such as this could be underestimated as flows in Lastarria have moved significantly slower than previously thought. The origin of molten sulfur is ascribed to the favorable S-rich chemistry of fumarolic gases and changes in host rock permeability (fracture opening). Molten sulfur in Lastarria correlates with a peak in activity characterized by high emissions of SO2 and other acid species, such as HF and HCl, in addition to ground deformation. Consequently, molten sulfur was framed within a period of volcanic unrest in Lastarria, triggered by changes in the magmatic-hydrothermal system. The appearance of molten sulfur is related to physicochemical perturbations inside the volcanic system and is perhaps a precursor of eruptive activity, as observed in the Poás and Turrialba volcanoes. KW - General Earth and Planetary Sciences PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-590331 DO - https://doi.org/10.3389/feart.2023.1197363 VL - 11 SP - 1 EP - 18 PB - Frontiers Media SA AN - OPUS4-59033 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Szymoniak, Paulina A1 - Böhning, Martin A1 - Zorn, Reiner A1 - Schönhals, Andreas T1 - Inelastic and quasielastic neutron scattering experiments on microporous membranes fro green separation processes N2 - Polymers with intrinsic microporosity are promising candidates for the active separation layer in gas separation membranes. These polymers are characterized by a high permeability and reasonable permselectivity. The latter point is somehow surprising because for microporous systems a more Knudson-like diffusion is expected then a size dependent temperature activated sieving process. It was argued in the framework of a random gate model that molecular fluctuations on a time scale from ps to ns are responsible for the permselectivity. Here series of polymers of intrinsic microporosity (PIMs) as well as microporous polynorbornenes with bulky Si side groups and a rigid backbone are considered. The polymers have different microporosity characterized by high BET surface area values. First inelastic time-of-flight neutron scattering measurements were carried out to investigate the low frequency density of state (VDOS). The measured data show the characteristic low frequency excess contribution to the VDOS above the Debye sound wave level, generally known as the Boson peak in glass-forming materials. It was found that the frequency of the maximum position of the Boson peak correlates with the BET surface area value. Secondly elastic scans as well as quasielastic neutron scattering measurements by a combination of neutron time-of-flight and backscattering have been out. A low temperature relaxation process was found for both polymers. This process was assigned to the methyl group rotation. It was analysed in terms of a jump diffusion in a three-fold potential. The analysis of the dependence of the elastic incoherent structure factor on the scattering vector yields the number of methyl groups which might be immobilized. The neutron scattering experiments were accompanied by fast scanning calorimetry and broadband dielectric investigations as well as atomistic molecular dynamic simulations. T2 - Kolloquiumsvortrag an der Technischen Universität München CY - Garching, Germany DA - 20.11.2023 KW - Polymers with intrinsic microporosity PY - 2023 AN - OPUS4-59036 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gleim, Tobias A1 - Neumann, Martin A1 - Linnemann, Konrad A1 - Wille, Frank T1 - Welding Seam Safety Evaluation in a Thick-Walled Type B Transport Package T2 - Proceedings of the 20th International Symposium on the Packaging and Transportation of Radioactive Materials N2 - The safety demonstration of heavy weight type B transport packages used for storing spent nuclear fuel (SNF) or radioactive waste is ensured by a combination of physical testing and numerical calculations. While experiments are performed in accordance with the IAEA regulations for selected drop scenarios, Finite-Element-Method (FEM) simulations are used to predict the most damaging case and to investigate additional drop positions. BAM as competent authority in Germany has performed different investigations of a welding seam for a typical large transport package made of A508 forged steel, where the bottom plate is welded to the cylindrical shell. The package has a mass of approx. 120 t. Results of physical drop tests with a full-scale model and accompanying preliminary FEM simulations are presented to determine the decisive stresses in the welding seam. A drop test only represents one set of a package and test parameters. A further parameter analysis is considered to account for allowable variations of packaging properties (e.g. resulting from the manufacturing process) and, based on IAEA requirements, the temperature dependence of the material behaviour. The results of the stress analyses from the drop test and the simulation form the basis and provide the input parameters for a fracture mechanics analysis. In addition to the IAEA specifications, further standards are taken into account for an in-depth investigation, see R6 [1], BS 7910 [2] and API 579-1/ASME FFS1 [3]. All the above-mentioned standards require a manufacturer-specific defect analysis with respect to size and position. Both result from the welding process and the following heat treatment regime. The maximum defect sizes are ensured with non-destructive test methods (such as ultrasonic or particle methods) as integral part of the manufacturing process of the welding seam. Another important parameter in the welding process is the residual stress (secondary stress). The combination of the primary and secondary stress determines the total stress in the welding seam. The most damaging case of the welding seam is determined and evaluated with help of the abovementioned standards and taking into account the IAEA requirements with respect to defect sizes, material properties, primary and residual stress, yield strength etc. T2 - PATRAM 22 - The International Symposium on the Packaging and Transportation of Radioactive Materials CY - Juan-Les-Pins, Antibes DA - 11.06.2023 KW - Welding KW - Transport Package KW - Fracture Mechanics PY - 2023 SP - 1 EP - 11 AN - OPUS4-59421 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schnell, A. A1 - Rübner, Katrin A1 - Seher, Julia A1 - Müller, A. A1 - Liebezeit, S. A1 - Fenner, J. A1 - Martin, F. A1 - Pniok, N. T1 - REALight ‐ Leichtgranulate und REA‐Gips aus feinkörnigen sulfatbelasteten Bau‐ und Abbruchabfällen JF - ce/papers - Proceedings in Civil Engineering N2 - Ziel des Projekts REALight ist die Entwicklung einer Referenzanlage zur Herstellung von Leichtgranulaten (leichte Gesteinskörnungen) aus Bau‐ und Abbruchabfällen und zur Gipsrückgewinnung. Als Rohstoffe werden bisher ungenutzte oder auf niedrigem Niveau eingesetzte Bau‐ und Abbruchabfälle und industrielle Nebenprodukte verwendet. Als Produkte werden leichte Gesteinskörnungen hergestellt. Die Sulfatabtrennung durch eine thermische Zersetzung bildet die Grundlage für die zusätzliche Gewinnung von Rauchgasentschwefelungs‐Gips (REA‐Gips). Das Projekt wird im Rahmen der Fördermaßnahme „Ressourceneffiziente Kreislaufwirtschaft – Bauen und Mineralische Stoffkreisläufe (ReMin)” gefördert. ReMin ist eine Maßnahme zur Umsetzung des BMBF‐Forschungskonzepts „Ressourceneffiziente Kreislaufwirtschaft” als Teil der BMBF Strategie „Forschung für nachhaltige Entwicklung – FONA”. Ziel der Förderung ist es, den Ausbau der Kreislaufwirtschaft voranzutreiben. Im Mittelpunkt steht dabei die Bauwirtschaft mit ihrer hohen Nachfrage nach Rohstoffen und gleichzeitig großen Mengen an anfallenden mineralischen Abfällen. Am Projekt REALight sind 12 Partner aus verschiedenen Bereichen der Baustoffherstellung und ‐anwendung, Abfallaufbereitung, Verfahrenstechnik sowie Forschung und Entwicklung beteiligt. T2 - 21. Internationale Baustofftagung (ibausil) CY - Weimar, Germany DA - 13.09.2023 KW - Baustoffrecycling KW - Leichtgranulate KW - Gips KW - Leichte Gesteinskörnungen KW - Drehrohrofen KW - Recycling KW - Mauerwerkbruch KW - Infraleichtbeton PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-591708 DO - https://doi.org/10.1002/cepa.2840 SN - 2509-7075 VL - 6 IS - 6 SP - 530 EP - 536 PB - Ernst & Sohn CY - Berlin AN - OPUS4-59170 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Seher, Julia A1 - Rübner, Katrin A1 - Müller, Constanze A1 - Martin, F. A1 - Pniok, N. A1 - Dreisow, B. ED - Döring, I. ED - Villagran Zaccardi, Y. ED - Müller, A. T1 - Lightweight aggregates made from construction and demolition waste - Application in lightweight concrete and mortars T2 - Proceedings of the V International Conference Progress of Recycling in the Built Environment N2 - Heterogeneous construction and demolition waste can be used as raw material to produce lightweight aggregates (LWA) similar to expanded clays. In the joint research project “REALight”, LWA were produced from masonry rubble in a thermal expanding process using a pilot production plant with a rotary kiln. Our research focuses on the characterisation of the novel LWA and their use in different hydraulically bound applications. Infra-lightweight concrete (ILC) was produced with the novel LWA, which accounts for two thirds of total aggregate volume, and Celitement, which is a hydraulic binder with a low carbon footprint. Its dry bulk density is ≤ 800 kg/m³. Strength and durability properties are comparable to ILC data from the literature. Lime-based repair mortars (LRM) containing LWA are beneficial for sandstone conservation due to their similar properties regarding porosity, water absorption and strength. A two-layer repair mortar system, which consists of a filling mortar to fill large voids and a covering mortar to modulate the surface texture to the historic sandstone, was developed. In our contribution, we present results of the LWA characterisation according to the European standard EN 13055:2016. Requirements and challenges of the use of the novel LWA in ILC and LRM are discussed. T2 - V International Conference Progress of Recycling in the Built Environment CY - Weimar, Germany DA - 10.10.2023 KW - CDW recycling KW - Lightweight aggreagtes KW - Lightweight concrete KW - Masonry rubble KW - Repair mortar PY - 2023 SN - 978-2-35158-238-1 VL - PRO 137 SP - 85 EP - 92 PB - RILEM Publications S.A.R.L. CY - Champs-sur-Marne, Frankreich AN - OPUS4-58991 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schischke, Karsten A1 - Rückschloss, Jana A1 - Schlegel, Moritz-C. A1 - Zöllinger, Jonathan A1 - Nissen, Nils F. A1 - Schneider-Ramelow, Martin T1 - The European Union’s Energy Label for Smartphones: Does it guide consumers to make environmentally sustainable choices? T2 - Proceedings 2023 IEEE 13th International Conference on Consumer Electronics N2 - The European Commission adopted an EU Energy Label for smartphones and tablets in June 2023. For the first time, the EU Energy Label will depict, among energy efficiency, also a reparability score, battery endurance, battery lifetime, drop resistance and dust and water ingress protection. However, does the multitude of parameters bear the risk to confuse consumers instead of triggering environmentally sustainable purchase decisions? In a survey in Germany, consumers were asked to make a choice when the label does not clearly identify the environmentally better product. Instead, energy efficiency has to be valued against reparability, reliability against energy efficiency, and reparability against reliability. The sustainability lever of the different aspects is not the same, as e.g. lifetime extension has a much more positive environmental impact than energy efficiency in case of mobile devices. Therefore, the question remains, whether consumers intuitively make the right choice. Results of the survey indicate that consumers interpret the complex label in the desired manner and value those aspects higher, which indeed have a more positive effect on the environment. T2 - 13th International Conference on Consumer Electronics CY - Berlin, Germany DA - 03.09.2023 KW - Energy efficiency KW - EU Energy Labelling KW - Reparability KW - Reliability KW - ESPR PY - 2023 UR - https://ieeexplore.ieee.org/document/10375619 DO - https://doi.org/10.1109/ICCE-Berlin58801.2023.10375619 SP - 1 EP - 6 PB - IEEE AN - OPUS4-59318 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Müller, H. S. A1 - Fenchel, M. A1 - Wiggenhauser, Herbert A1 - Maierhofer, Christiane A1 - Krause, Martin A1 - Gardei, André A1 - Mielentz, Frank A1 - Milmann, Boris A1 - Röllig, Mathias A1 - Wöstmann, Jens T1 - Zerstörungsfreie Ortung von Gefügestörungen in Betonbodenplatten T2 - DAfStb-Heft N2 - Das Ziel des Forschungsvorhabens „Zerstörungsfreie Ortung von Gefügestörungen in Betonbodenplatten“ bestand in der Entwicklung eines Untersuchungskonzepts zur sicheren Ortung und Erfassung von Gefügestörungen in einseitig zugänglichen Betonplatten durch den kombinierten Einsatz verschiedener zerstörungsfreier Prüfverfahren. Hierfür wurde die Leistungsfähigkeit der folgenden Messverfahren hinsichtlich ihrer Aussageschärfe, Anwendungsgrenzen und Messgeschwindigkeit bei praxisnahen Randbedingungen untersucht: - Impakt-Echo, manuelle Impaktauslösung - Impakt-Echo, automatisierte Impaktauslösung - Ultraschall-Echo mit multistatischem Array - Impuls-Thermografie - Radar Als Versuchskörper dienten sechs liegend hergestellte Betonplatten der Abmessungen 200/200/30 cm aus zwei verschiedenen Betongüten und mit unterschiedlichem Bewehrungsgehalt (Bewehrungsgrade 0 %, 0 ,9 %, 2 ,6 %), von denen vier Platten auf trockenem und zwei Platten auf ständig nass gehaltenem Sand gelagert waren. Alle sechs Platten enthielten jeweils dieselben künstlich eingebrachten Fehlstellen: vier quadratische Kiesnester in unterschiedlicher Tiefe mit Kantenlängen zwischen 10 und 15 cm sowie drei oberflächennahe Hohlstellen (Ø 4/6/8 cm). Zur Erfassung eines möglichen Einflusses des Betonalters wurden die Messungen 4 Tage, 28 Tage sowie 180 Tage nach Herstellung der Platten durchgeführt. Um aus den Untersuchungen einen breiten Nutzen für die Praxis zu erzielen, basierten die eingesetzten Messverfahren auf handelsüblichen Geräten, welche jedoch bezüglich ihres Messprinzips und insbesondere der Datenerfassung und -auswertung weiterentwickelt wurden. Die Fehlstellengröße wurde bewusst klein gewählt. Mit Ausnahme des manuellen Impakt-Echo-Verfahrens, mit welchem unter Verwendung der Originalsoftware des Herstellers keine Fehlstellen nachweisbar waren, zeigten sich alle Messverfahren geeignet, unter verschiedenen Randbedingungen Gefügestörungen zu lokalisieren. Insgesamt wurde jeder Fehlstellentyp von zumindest einem Verfahren bei mindestens zwei Versuchskörpern detektiert. Es konnten jedoch an keiner Betonplatte mit einem einzelnen Messverfahren alle vorhandenen Fehlstellen an allen Messterminen geortet werden. Am häufigsten wurden die beiden großen oberflächennahen Fehlstellen (Hohlstelle Ø 8 cm, Kiesnest 10 cm) erkannt. Am schwersten zu lokalisieren waren die kleine Hohlstelle mit 4 cm Durchmesser sowie die beiden auf der Unterseite gelegenen Kiesnester. Die Untersuchungen zeigen, dass für eine erfolgreiche Anwendung zerstörungsfreier Messverfahren in der Praxis die Auswahl des am besten geeigneten Verfahrens bzw. einer Kombination verschiedener Verfahren jeweils auf die vorliegende Problemstellung abgestimmt sein muss. Für Betonbodenplatten mit hohem Feuchtegehalt (junger Beton) oder starker Bewehrung ist entweder das Ultraschall- oder das Impakt-Echo-Verfahren geeignet. Das Ultraschall-Verfahren wird von hohen Bewehrungsgehalten zwar stärker beeinflusst als das Impakt-Echo-Verfahren, besitzt aber eine bessere Auflösung und ermöglicht auch im oberflächennahen Bereich eine quantitative Bestimmung der Fehlstellentiefe. Das Impakt-Echo-Verfahren kann wegen der niederfrequenten Impulsanregung Fehlstellen erst in größeren Tiefen und mit schlechterer Auflösung nachweisen, ist aber ideal geeignet zur Bestimmung der Plattendicke aufgrund seines signifikanten Rückwandechos. Sowohl das Radar-Verfahren als auch die Impuls-Thermografie können bei hohen Feuchte- und Bewehrungsgehalten nur sehr oberflächennah eingesetzt werden. Bei trockenem Beton und geringen bis mittleren Bewehrungsgehalten liefert das Radar-Verfahren sehr gute Ergebnisse. In kurzer Zeit ermöglicht es eine flächendeckende Ortung der Tiefenlage und Größe von Inhomogenitäten bei guter Auflösungsgenauigkeit. Vorhandene Bewehrung wird deutlich abgebildet, kann aber darunterliegende Fehlstellen verschatten. Alternativ kann die Impuls-Thermografie für die Ortung oberflächennaher Gefügestörungen eingesetzt werden. Das Verfahren eignet sich insbesondere bei Oberflächen, die nicht direkt zugänglich sind, da zwischen Infrarotkamera und Messobjekt nur Sichtkontakt bestehen muss. Die Betongüte hatte bei keinem eingesetzten Verfahren einen erkennbaren Einfluss auf die Messergebnisse. Streng genommen ist dies jedoch nur für den Einfluss des Wasserzementwertes, der Zementart und des Zementgehalts bei gleichbleibender Sieblinie und gleicher Kornart gültig. Bei Verwendung von Leichtzuschlag sind abweichende Ergebnisse denkbar. PY - 2010 SN - 978-3-410-65075-1 SN - 0171-7197 IS - 589 SP - 1 EP - 88 PB - Beuth CY - Berlin AN - OPUS4-22699 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Weber, Kathrin A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Reinholz, Uwe A1 - Stephan-Scherb, Christiane T1 - A µ‐XANES study of the combined oxidation/sulfidation of Fe–Cr model alloys JF - Materials and Corrosion N2 - The precise analysis of cation diffusion profiles through corrosion scales is an important aspect to evaluate corrosion phenomena under multicomponent chemical load, as during high‐temperature corrosion under deposits and salts. The present study shows a comprehensive analysis of cation diffusion profiles by electron microprobe analysis and microbeam X‐ray absorption near edge structure (µ‐XANES) spectroscopy in mixed oxide/sulfide scales grown on Fe–Cr model alloys after exposing them to 0.5% SO2. The results presented here correspond to depth‐dependent phase identification of oxides and sulfides in the corrosion scales by µ‐XANES and the description of oxidation‐state‐dependent diffusion profiles. Scales grown on low‐ and high‐alloyed materials show both a well‐pronounced diffusion profile with a high concentration of Fe3+ at the gas and a high concentration of Fe2+ at the alloy interface. The distribution of the cations within a close‐packed oxide lattice is strongly influencing the lattice diffusion phenomena due to their different oxidation states and therefore different crystal‐field preference energies. This issue is discussed based on the results obtained by µ‐XANES analysis. KW - X-ray absorption spectroscopy KW - Oxidation KW - Sulfidation PY - 2019 DO - https://doi.org/10.1002/maco.201810644 VL - 70 IS - 8 SP - 1360 EP - 1370 PB - Wiley VCH-Verlag AN - OPUS4-47934 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Epperlein, Martin T1 - Digitalisierung in der Additiven Fertigung N2 - Die Entwicklung einer digitalen QI ermöglicht die objektive Qualitätssicherung in der Additiven Fertigung und macht die Technologie gerade auch für kleine und mittelständische Unternehmen besser nutzbar. Sie wird vollwertig im Rahmen des Qualitätsanspruchs „Made in Germany“ einsetzbar – gerade auch beim Umbruch in Industriezweigen. Der Vortrag gibt Einblicke in aktuelle Arbeiten und die Ziele des Use Case Additive Fertigung. T2 - LEF-Themenwoche, Bayerisches Laserzentrum CY - Online meeting DA - 21.03.2023 KW - Digitalisierung KW - Qualitätsinfrastruktur KW - Additive Fertigung KW - Qualitätssicherung PY - 2023 AN - OPUS4-57186 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gleim, Tobias A1 - Neumann, Martin A1 - Linnemann, Konrad A1 - Wille, Frank T1 - Fracture Mechanical Analyses of a Welding Seam of a Thick-Walled Transport Package T2 - Proceedings of the 20th International Symposium on the Packaging and Transportation of Radioactive Materials N2 - The safety demonstration of heavy weight type B transport packages used for storing spent nuclear fuel (SNF) or radioactive waste is ensured by a combination of physical testing and numerical calculations. While experiments are performed in accordance with the IAEA regulations for selected drop scenarios, Finite-Element-Method (FEM) simulations are used to predict the most damaging case and to investigate additional drop positions. BAM as competent authority in Germany has performed different investigations of a welding seam for a typical large transport package made of A508 forged steel, where the bottom plate is welded to the cylindrical shell. The package has a mass of approx. 120 t. Results of physical drop tests with a full-scale model and accompanying preliminary FEM simulations are presented to determine the decisive stresses in the welding seam. A drop test only represents one set of a package and test parameters. A further parameter analysis is considered to account for allowable variations of packaging properties (e.g. resulting from the manufacturing process) and, based on IAEA requirements, the temperature dependence of the material behaviour. The results of the stress analyses from the drop test and the simulation form the basis and provide the input parameters for a fracture mechanics analysis. In addition to the IAEA specifications, further standards are taken into account for an in-depth investigation, see R6, BS 7910 and API 579-1/ASME FFS1. All the above-mentioned standards require a manufacturer-specific defect analysis with respect to size and position. Both result from the welding process and the following heat treatment regime. The maximum defect sizes are ensured with non-destructive test methods (such as ultrasonic or particle methods) as integral part of the manufacturing process of the welding seam. Another important parameter in the welding process is the residual stress (secondary stress). The combination of the primary and secondary stress determines the total stress in the welding seam. The most damaging case of the welding seam is determined and evaluated with help of the above-mentioned standards and taking into account the IAEA requirements with respect to defect sizes, material properties, primary and residual stress, yield strength etc. T2 - PATRAM 22 - The International Symposium on the Packaging and Transportation of Radioactive Materials CY - Juan-Les-Pins, Antibes, France DA - 11.06.2023 KW - Transport Package KW - Welding KW - Fracture Mechanics PY - 2023 SP - 1 EP - 10 AN - OPUS4-57696 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Gleim, Tobias A1 - Gradt, Thomas A1 - Wille, Frank T1 - Friction coefficients for wood-wood and wood-steel interfaces in impact limiters for transport casks N2 - Wood is widely used in impact limiters of transport casks for radioactive material. Encapsulated by an outer and inner steel structure, spruce wood is often applied in layers of alternating direction. The friction at the interfaces between these layers is of crucial importance for the impact and energy absorption e.g., at an accidental impact of a cask against a hard target. In order to get detailed information for corresponding numerical calculations, in this study the friction coefficient for the combinations wood-wood and wood-steel was measured in the temperature range between -40°C and 90°C according to the relevant stress conditions for such casks. Results show decreasing friction with increasing temperature, ranging from 0.43 at -40°C to 0.22 for 90°C for wood-steel combinations and from 0.3 at -40°C to 0.24 at 90°C to for a wood-wood combination. T2 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 22) CY - Juan-les-Pins, France DA - 11.06.2023 KW - Wood KW - Friction KW - Transport cask PY - 2023 AN - OPUS4-57702 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Quercetti, Thomas A1 - Wille, Frank A1 - Gröke, Carsten A1 - Neumeyer, Tino T1 - Design assessment, approval of management systems and ageing aspects of transport packages for radioactive material not requiring competent authority approval of design T2 - Proceedings of the 20th International Symposium on the Packaging and Transportation of Radioactive Materials N2 - Most transports of radioactive materials are carried out with packages not requiring competent authority approval of design. These encompass – in accordance with the IAEA SSR-6 regulations – packages of the classification excepted, Industrial packages Type 1, 2 and 3 and Type A packages. Currently an upsurge in number and variation of these package designs can be seen in Germany, resulting from the phase out of nuclear energy in Germany as well as e. g. increased use of radioactive material for medical purposes. A design assessment regarding the package safety is required in the international IAEA SSR-6 regulations. BAM operates facilities for the performance of all regulatory tests required such as drop towers for a wide range of package masses and dimensions, fire test, leak tightness measurements and pressure test facilities. Experiences with several package types are shown. Additionally, IAEA SSR-6 requires the establishment of a management system for design, manufacture, maintenance, and repair of the packaging as well as for the preparation, consigning, loading, carriage, unloading and receipt of the package. Relevant for Germany, BAM has published guidance material on the process of management system acceptance in the technical guide BAM-GGR 016. The requirements encompass quality management plans for the manufacturing of packages including independent manufacturing surveillance and specific instructions for operation, maintenance, and repair of packagings. Examples for management system specifics and requirements are given. Since the latest edition of the IAEA SSR-6 regulations an ageing evaluation including systematic ageing management measures are required for all kind of package types. BAM is going to update the guidance material BAM-GGR 016 to support the stakeholders with relevant information to fulfil the ageing aspect for packages not requiring competent authority approval. The paper explains how the ageing aspect may be included in the safety evaluation process and the management system measures and will give an outlook for the future guidance material. T2 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 22) CY - Juan-Les-Pins, Antibes, France DA - 11.06.2023 KW - Typ KW - Radioactive material KW - Non-approved PY - 2023 SP - 1 EP - 8 AN - OPUS4-57703 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Quercetti, Thomas A1 - Wille, Frank A1 - Gröke, Carsten A1 - Neumeyer, Tino T1 - Design assessment, approval of management systems and ageing aspects of transport packages for radioactive material not requiring competent authority approval of design N2 - Most transports of radioactive materials are carried out with packages not requiring competent authority approval of design. These encompass – in accordance with the IAEA SSR-6 [1] regulations – packages of the classification excepted, Industrial packages Type 1, 2 and 3 and Type A packages. Currently an upsurge in number and variation of these package designs can be seen in Germany, resulting from the phase out of nuclear energy in Germany as well as e. g. increased use of radioactive material for medical purposes. A design assessment regarding the package safety is required in the international IAEA SSR-6 [1] regulations. BAM operates facilities for the performance of all regulatory tests required such as drop towers for a wide range of package masses and dimensions, fire test, leak tightness measurements and pressure test facilities. Experiences with several package types are shown. Additionally, IAEA SSR-6 [1] requires the establishment of a management system for design, manufacture, maintenance, and repair of the packaging as well as for the preparation, consigning, loading, carriage, unloading and receipt of the package. Relevant for Germany, BAM has published guidance material on the process of management system acceptance in the technical guide BAM-GGR 016 [2]. The requirements encompass quality management plans for the manufacturing of packages including independent manufacturing surveillance and specific instructions for operation, maintenance, and repair of packagings. Examples for management system specifics and requirements are given. Since the latest edition of the IAEA SSR-6 [1] regulations an ageing evaluation including systematic ageing management measures are required for all kind of package types. BAM is going to update the guidance material BAM-GGR 016 [2] to support the stakeholders with relevant information to fulfil the ageing aspect for packages not requiring competent authority approval. The paper explains how the ageing aspect may be included in the safety evaluation process and the management system measures and will give an outlook for the future guidance material. T2 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 22) CY - Juan-les-Pins, France DA - 11.06.2023 KW - Radioactive material KW - Type A package KW - Management system KW - Tests KW - Non-approved PY - 2023 AN - OPUS4-57704 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schilling, O. A1 - Neumann, Martin A1 - Wolff, Dietmar A1 - Wille, Frank A1 - Darnstädt, A. T1 - System of Quality Assurance Measures in Manufacturing and Operation of Dual Purpose Casks for Spent Nuclear Fuel and High Level Waste in Germany N2 - German spent nuclear fuel and high level waste is stored in dry conditions in interim storage facilities until a final repository will be ready for operation in the future. Dual purpose casks are used for the packaging of the materials to ensure transportability at any time during long-term interim storage and fulfilling both requirements from interim storage as well as transport. Germany’s 2011 decision to phase out utilization of nuclear energy has led to a high demand for casks for decommissioning power plants as quickly as possible. Cask serial production will continue at a high level for the next few years. In the process, a system of quality assurance measures ensures that every cask reliably complies with design specification according the transport approval certificate and storage license. When the first casks were manufactured in Germany about 40 years ago, quality assurance was oriented towards pressure vessel and general nuclear manufacturing. The system was continuously adapted to the state of the art. In particular serial production, globalization of manufacturing and deep supplier chains had to be taken into account. The system of quality assurance measures applied today for cask manufacturing shall be presented here. The quality assurance measures can be categorized as system-related and design-related. With respect to transport regulations for example, they are independently approved and monitored by the competent authority BAM and its authorized inspection experts. The qualification of the applicant is reviewed first in the context of the design approval procedure and then periodically. The qualification of component and cask manufacturers is also checked at the start of manufacturing and then periodically. Before the start of manufacturing documents such as quality plans are pre-assessed. Manufacturing and inspection are then performed according to the pre-assessed documents. Cask manufacturing is completed by a final inspection before commissioning. Periodic inspections during operation ensure preservation of the properties specified in the approval certificate over package life time. The type and the time interval of periodic inspections depend on the use of the package. For transport after interim storage a system of specific tests and inspections is prescribed. T2 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 22) CY - Juan-les-Pins, France DA - 11.06.2023 KW - Radioactive material KW - Quality Assurance Measures KW - Dual Purpose Casks KW - Independent Surveillance PY - 2023 AN - OPUS4-57705 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Schilling, Markus A1 - Thuy, Maximilian A1 - Niebergall, Ute T1 - Environmental Stress Cracking in PE-HD – Assessment of Crack Propagation and Mechanisms by Optical Methods N2 - Slow crack growth (SCG) under the influence of external fluid media, usually termed environmental stress cracking (ESC), is still one of the most frequent origins of severe damage and failure of polymeric materials. For polyethylene (PE) this is relevant for mass products, like bottles for consumer products, but also for high-performance materials for pipes or industrial packaging, including containers for chemicals and other dangerous goods. Especially for high-density polyethylene (PE-HD) the susceptibility to SGC and ESC is depending on the complex interplay between molecular weight and architecture and the resulting semicrystalline morphology, especially the formation of tie-molecules. A reliable assessment of the resistance against this damage phenomenon is essential for demanding as well as safety-critical applications and has to take into account suitable testing methodologies and conditions in combination with environmental media reflecting the properties representative for typical fillings and relevant components causing ESC. In this context a better understanding of different influencing factors, such as sorption, swelling or surface activity is necessary together with a detailed characterization of different stages of crack propagation and underlying mechanisms. Therefor well-established testing methods, such as the Full Notch Creep Test (FNCT), were complemented by detailed fracture surface analysis using e.g. LSM and SEM in combination with a time-dependent optical monitoring of the progressing crack growth. For the crack growth also the ratio of fibrillated craze zone to crack opening is important for the deeper understanding of crack propagation and related material parameters which can be additionally addressed by X-ray computed tomography. T2 - 34th Polymer Degradation Disscussion Group (PDDG) Conference CY - Dubrovnik, Croatia DA - 12.06.2023 KW - Polyethylen KW - Full Notch Creep Test KW - Environmental Stress Cracking KW - Fracture Surface Analysis PY - 2023 AN - OPUS4-57711 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Gleim, Tobias A1 - Nehrig, Marko A1 - Musolff, André A1 - Wille, Frank T1 - R&D Activities by BAM Related to Transport Package Fire Testing T2 - Proceedings of the 20th International Symposium on the Packaging and Transportation of Radioactive Materials N2 - Packages for the transport of radioactive material shall meet the mechanical and thermal test requirements of the International Atomic Energy Agency (IAEA) regulations for package design approval. Besides mechanical testing, the Federal Institute for Materials Research and Testing (BAM) performs thermal tests in accordance with the IAEA regulations. The thermal test includes a 30-minute 800°C fully engulfing fire. BAM continuously performs various thermal experiments for the investigation of the thermal response of packages with respect to the IAEA fire. The purpose of this paper is to give an overview of the already performed, ongoing and future physical tests and experiments of BAM in the field of thermal investigations. These research and development works shall support our competencies for the authority package design assessment. BAM operates a propane gas fire test facility. To be able to carry out comparative investigations and validity between the propane fire and the in detail prescribed pool fire test in the regulations, BAM carries out various calorimetric tests and investigates the boundary conditions of the fire with the help of fire reference packages. At the same time, we are conducting various fire scenarios with wood-filled impact limiters. Large-scale fire tests of impact limiters are carried out on a full scale as well as on a small scale. Influencing variables are investigated in particular by means of geometric changes and the consideration of artificial damages, in particular holes. In addition to propane fire as a heat source, thermal scenarios are also investigated with hydrogen as heat source and an infrared radiator system to ignite test specimens. For these numerous test arrangements, the transferability to existing and newly developed transport package designs is essential and fruitful within the review of design approvals, especially for Dual Purpose casks with a long-lasting operation time. T2 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 22) CY - Juan-Les-Pins, France DA - 11.06.2023 KW - Fire KW - Testing KW - Hydrogen KW - Wood KW - Propane KW - Heat Flux KW - Fire Reference Package KW - Radioactive Material PY - 2023 SP - 1 EP - 10 AN - OPUS4-57721 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dümmel, Martin T1 - Consumer fireworks in europe - challenges for the future N2 - This presentation gives a brief overview on the current situation of fireworks safety and security on the EU market, outlines the current standardization request of the European Commission with new and more stringent requirements and gives a perspective to further challenges for fireworks in Europe. T2 - 18th International Symposium on Fireworks CY - Valetta, Malta DA - 24.04.2023 KW - Fireworks KW - Standardisation KW - Pyrotechnics PY - 2023 AN - OPUS4-57389 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dümmel, Martin T1 - Consumer fireworks in europe – challenges for the future T2 - Proceedings of the 18th International Symposium on Fireworks N2 - This paper gives a brief overview on the current situation of fireworks safety and security on the EU market, outlines the current standardization request of the European Commission with new and more stringent requirements and gives a perspective to further challenges for fireworks in Europe. T2 - 18th International Symposium on Fireworks CY - Valetta, Malta DA - 24.04.2023 KW - Pyrotechnic articles KW - Fireworks KW - Standardisation PY - 2023 SN - 978-0-9867279-6-2 SP - 33 EP - 42 PB - International Symposium on Fireworks Society Ltd. CY - Whitefish Bay, Wisconsin 53217-5968 USA AN - OPUS4-57395 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Thuy, Maximilian A1 - Brauch, N. A1 - Niebergall, Ute A1 - Alig, I. A1 - Oehler, H. A1 - Böhning, Martin T1 - Environmental Stress Cracking of PE-HD Induced by Liquid Test Media Representing Crop Protection Formulations T2 - Advances in Accelerated Testing and Predictive Methods in Creep, Fatigue, and Environmental Cracking N2 - Packaging containers for dangerous goods that include aggressive liquids require that any packaging material that is based on high-density polyethylene has a high degree of stability and durability. This work is focused on testing the environmental stress cracking of the high-density polyethylenes used for such containers in contact with crop protection formulations, in particular, two model liquids established in Germany as standardized test media representatives for crop protection formulations containing the various admixtures typical for such products. One of the liquids is water-based and contains mostly surface-active ingredients, while the other is solvent-based and includes some emulsifiers. Originally established for pin impression tests, these model liquids and their individual components were here used for the first time as environmental media in the Full Notch Creep Test, which addresses the resistance against environmental stress cracking. The Full Notch Creep Test was carried out on five high-density polyethylene types with both model liquids, and also on one selected material with its components. The evaluation was focused on the fracture surface structures, which were visualized by a scanning electron microscope and by optical in situ imaging of the notch opening. While the water-based model liquid and its surface-active individual components induced environmental stress cracking with the characteristic pattern for a craze-crack mechanism and so-called brittle fracture on the surface, the solvent-based model liquid and its soluble ingredients exhibited rather ductile failure behavior, caused by the plasticizing effect on the polymer that reduced the yield stress of the high-density polyethylene. For both cases, fracture surface analysis, together with side views of the crack opening, showed a clear relation between surface pattern, notch deformation (e.g., by blunting), or crack opening due to crack growth with time to failure and the solubility of the liquids in high-density polyethylene. KW - Environmental stress cracking KW - Fracture surface KW - Full Notch Creep Test KW - Crop protection formulations KW - High-density polyethylene PY - 2023 DO - https://doi.org/10.1520/STP164320210095 SP - 317 EP - 341 PB - ASTM International CY - West Conshohocken, PA (USA) AN - OPUS4-57459 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Neumann, Martin A1 - Gleim, Tobias A1 - Gradt, Thomas A1 - Wille, Frank T1 - Friction coefficients for wood-wood and wood-steel interfaces in impact limiters for transport casks T2 - Proceedings of the 20th International Symposium on the Packaging and Transportation of Radioactive Materials N2 - Wood is widely used in impact limiters of transport casks for radioactive material. Encapsulated by an outer and inner steel structure, spruce wood is often applied in layers of alternating direction. The friction at the interfaces between these layers is of crucial importance for the impact and energy absorption e.g., at an accidental impact of a cask against a hard target. In order to get detailed information for corresponding numerical calculations, in this study the friction coefficient for the combinations wood-wood and wood-steel was measured in the temperature range between -40°C and 90°C according to the relevant stress conditions for such casks. Results show decreasing friction with increasing temperature, ranging from 0.43 at -40°C to 0.22 for 90°C for wood-steel combinations and from 0.3 at -40°C to 0.24 at 90°C to for a wood-wood combination. T2 - 20th International Symposium on the Packaging and Transportation of Radioactive Materials CY - Juan-les-Pins, France DA - 11.06.2023 KW - Wood KW - Friction KW - Transport cask PY - 2023 SP - 1 EP - 11 AN - OPUS4-57334 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Guerra, M.F. A1 - Neri, E. A1 - Radtke, Martin T1 - Gold leaf tesserae: tracing the origins of gold using synchrotron-based techniques JF - The European Physical Journal Plus N2 - To gain insight into the possible origin of the gold used in the production of tesserae containing gold leaf less than 0.5 μm thick placed between two layers of glass, we propose a non-destructive synchrotron radiation (SR) XRF protocol based on sequential analysis under optimised analytical conditions. Using this protocol, trace element analysis is achieved with detection limits of 1–6 mg/kg. As Pt and Au have adjacent fluorescence energies, we tested the most challenging situation, when Pt is present in very low concentrations in gold. Data obtained by double-dispersive XRF (D2XRF) and μXRF for fourth–ninth-century mosaics decorating nine Eastern and Western religious buildings show that the Eastern and Western tesserae are made from different alloys. However, these alloys are identical to those used to make gold leaf for gilding, because plastic deformation requires the use of gold alloys with high ductility and malleability. Although trace element composition of gold used in the concerned period is only available for coins, by comparing the amounts of Pt contained in the tesserae and in the coins we show that Roman tesserae are made from Roman gold, as described in the documentary sources. We observe for the Byzantine period the use of a Byzantine gold and of gold supposedly from different stages of recycling, and we suggest the use of Umayyad and Abbasid gold for the production of Islamic tesserae. KW - Gold KW - XRF KW - Synchrotron KW - BAMline KW - D2XRF KW - Tesserae PY - 2023 DO - https://doi.org/10.1140/epjp/s13360-022-03638-y SN - 2190-5444 VL - 138 IS - 2 SP - 1 EP - 15 AN - OPUS4-57208 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Neumann, Martin A1 - Gleim, Tobias A1 - Gradt, Thomas T1 - Friction coefficients for wood-wood and wood-steel high pressure contact under temperatures between -40 °C and 90 °C JF - Tribologie + Schmierungstechnik N2 - Wood is widely used in impact limiters of Transport casks for radioactive material. Encapsulated by an outer and inner Steel structure, spruce wood is offen applied in layers of altemating direction. The friction at the interfaces between these layers is of crucial importance for the impact and energy absorption e.g., at an accidental impact of a cask against a hard component. In order to get detailed Information for corresponding numerical calculations, in this study the friction coefficient for the combinations wood-wood and wood-steel was measured in the temperature ränge between -40 °C and 90 °C according to the relevant stress conditions for such casks. Results show decreasing friction with increasing temperature, ranging from 0.43 at -40 °C to 0.22 for 90 °C for wood-steel combinations and from 0.3 at -40 °C to 0.24 at 90 °C to for a wood-wood combination. KW - Wood KW - Friction KW - Transport cask KW - Radioactive material PY - 2023 DO - https://doi.org/10.24053/TuS-2023-0007 SN - 0724-3472 VL - 70 IS - 2 SP - 5 EP - 12 PB - expert verlag AN - OPUS4-57787 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Bresch, Harald A1 - Dörfel, Ilona A1 - Steinborn, Gabriele A1 - Krietsch, Arne A1 - Langner, Jeanette A1 - Schmidt, Martin A1 - Österle, Werner A1 - Seeger, Stefan T1 - Physical-chemical characterization of NM105(P25) N2 - NM 105, Ti02 (P25) could not be ignited as dust layer and dispersed in air as dust/air-mixture as well. This dust is not dust explosible and the burning behaviour corresponds to Burning Class 1 (no Ignition). The results have shown that the tested sample is thus not combustible at all, because it is already oxidized completely. KW - OECD KW - WPMN KW - TiO2 KW - NM105 KW - P25 KW - Sponsorship programme PY - 2012 SP - 1 EP - 18 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-27322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bornemann-Pfeiffer, Martin A1 - Kern, Simon A1 - Jurtz, N. A1 - Thiede, Tobias A1 - Kraume, M. A1 - Maiwald, Michael T1 - Design and validation of an additively manufactured flowCell–static mixer combination for inline NMR spectroscopy JF - Industrial & Engineering Chemistry Research N2 - There have been an increasing number of publications on flow chemistry applications of compact NMR. Despite this, there is so far no comprehensive workflow for the technical design of flow cells. Here, we present an approach that is suitable for the design of an NMR flow cell with an integrated static mixing unit. This design moves the mixing of reactants to the active NMR detection region within the NMR instrument, presenting a feature that analyses chemical reactions faster (5–120 s region) than other common setups. During the design phase, the targeted mixing homogeneity of the components was evaluated for different types of mixing units based on CFD simulation. Subsequently, the flow cell was additively manufactured from ceramic material and metal tubing. Within the targeted working mass flow range, excellent mixing properties as well as narrow line widths were confirmed in validation experiments, comparable to common glass tubes. KW - Inline NMR Spectroscopy KW - Integrated Processes KW - Reaction Monitoring KW - Process Analytical Technology KW - Flow Chemistry KW - Static Mixing KW - Modular Production PY - 2019 UR - https://pubs.acs.org/doi/abs/10.1021/acs.iecr.9b03746 DO - https://doi.org/10.1021/acs.iecr.9b03746 SN - 0888-5885 SN - 1520-5045 N1 - Geburtsname von Bornemann-Pfeiffer, Martin: Bornemann, M. - Birth name of Bornemann-Pfeiffer, Martin: Bornemann, M. VL - 58 IS - 42 SP - 19562 EP - 19570 PB - American Chemical Society CY - Washington AN - OPUS4-49041 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, S. A1 - Jurtz, N. A1 - Thiede, T. A1 - Kraume, M. A1 - Maiwald, Michael T1 - Additively manufactured Flow Cells for Inline Mixing and Reaction Monitoring with Low-Field NMR Spectroscopy N2 - The demand for increasing product diversity in the chemical process industry calls for new production processes that enable greater flexibility. Therefore, plants are needed that produce significant quantities for market supply that can be scaled up to several tons per year. Compared to traditional batch processes, intensified continuous production enables not only flexibility but also the production of compounds that are difficult to produce. Custom-designed small-scale reactors significantly improve heat and mass transfer through micro mixing and can improve safety, e.g. in the case of high grade exothermic or high-pressure reactions, and might play an important role for customized, modular production facilities.1 Combined with optimally designed flow cells, compact NMR instruments currently present promising analytical tools for use in flow chemistry applications.2,3 In recent process monitoring applications, the flow cell and the mixing unit are usually separated parts leading to a severe time delay between mixing and first data acquisition. In this work, we present a comprehensive workflow for the design of a flow cell−mixer combination based on CFD simulation and other design principles.4 Due to the increasing opportunities in additive manufacturing of ceramics, it was possible to realize an optimized SMX-type mixer with a fully integrated NMR flow cell (cf. Fig. 1). Validation studies exhibited 1H NMR spectra with a quality comparable to common NMR glass tubes. So far, the mixing performance of the system has been evaluated for different mass flow rates within the intended working range of 5–120 seconds region and compared to ideally mixed samples. Thus, the integrated flow cell−static mixer combination can be used for different purposes such as evaluation of fluid properties, equilibration studies, or reaction monitoring of two instantaneously mixed samples. The ceramic flow cell was additively manufactured and analyzed through x-ray microtomography revealing surface characteristics due to the manufacturing process (cf. Fig. 2). Furthermore, the working range of the whole system was characterized leading to an operational specification for further applications. In summary, the role of custom-designed components for modular, chemical production, amongst other essential factors like fast development of reliable evaluation models is discussed. References [1] Bornemann-Pfeiffer et al., Chem. Ing. Tech. (2021), 93: 1–10 [2] Kern et al., Anal. Bioanal. Chem. (2018) 410: 3349–3360 [3] Kern et al., Anal. Bioanal. Chem. (2019) 411: 3037–3046 [4] Bornemann et al., Ind. Eng. Chem. Res. (2019), 58: 19562−19570 T2 - EUROPACT - European Conference on Process Analytics and Control Technology CY - Online meeting DA - 15.11.2021 KW - Process analytical technology KW - NMR spectroscopy KW - Additive manufacturing KW - Computational fluid dynamics PY - 2021 AN - OPUS4-53804 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bornemann-Pfeiffer, Martin A1 - Wolf, Jakob A1 - Meyer, Klas A1 - Kern, S. A1 - Angelone, D. A1 - Leonov, A. A1 - Cronin, L. A1 - Emmerling, Franziska T1 - Standardization and control of Grignard reactions in a universal chemical synthesis machine using online NMR T1 - Standardisierung und Kontrolle von Grignard-Reaktionen mittels Online-NMR in einer universellen chemischen Syntheseplattform JF - Angewandte Chemie - International Edition N2 - A big problem with the chemistry literature is that it is not standardized with respect to precise operational parameters, and real time corrections are hard to make without expert knowledge. This lack of context means difficult reproducibility because many steps are ambiguous, and hence depend on tacit knowledge. Here we present the integration of online NMR into an automated chemical synthesis machine (CSM aka. “Chemputer” which is capable of small-molecule synthesis using a universal programming language) to allow automated analysis and adjustment of reactions on the fly. The system was validated and benchmarked by using Grignard reactions which were chosen due to their importance in synthesis. The system was monitored in real time using online-NMR, and spectra were measured continuously during the reactions. This shows that the synthesis being done in the Chemputer can be dynamically controlled in response to feedback optimizing the reaction conditions according to the user requirements. N2 - Ein Problem der chemischen Literatur ist die fehlende Standardisierung bezüglich genauer Bedingungen, auch Echtzeit-Korrekturen sind ohne Expertenwissen nur schwer möglich. Dieser Mangel an Details erschwert experimentelle Reproduzierbarkeit, da Schritte oft mehrdeutig sind und daher von implizitem Wissen abhängen. Hier präsentieren wir die Integration von Online-NMR Spektroskopie in eine automatisierte chemische Syntheseplattform (CSM aka. “Chemputer”, unter Verwendung einer universellen Programmiersprache zur Synthese kleiner Moleküle fähig), um eine automatisierte Analyse und Anpassung von Reaktionen im laufenden Betrieb zu ermöglichen. Das System wurde anhand von Grignard-Reaktionen, die aufgrund ihrer Bedeutung für die Synthese ausgewählt wurden, validiert und einem Härtetest unterzogen. Synthesen wurden in Echtzeit mit Online-NMR überwacht, und die Spektren wurden während der Reaktionen kontinuierlich aufgenommen und analysiert. Dies zeigt, dass der Chemputer dynamisch mittels einer Regelung kontrolliert werden kann, um die Reaktionsbedingungen entsprechend den Anforderungen des Benutzers zu optimieren. KW - Grignard reaction KW - NMR spectroscopy KW - Process analytical technology KW - Process control KW - Grignard-Reaktion KW - NMR-Spektroskopie KW - Prozessanalytik KW - Prozesskontrolle PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-531260 DO - https://doi.org/10.1002/anie.202106323 SN - 1521-3773 SN - 1433-7851 N1 - Bibliografische Angaben für die deutsche Version: Angewandte Chemie 2021, Jg. 133, S. 1–7, ISSN 0044-8249, ISSN 1521-3757, https://doi.org/10.1002/ange.202106323 - Bibliographic information for the German version: Angewandte Chemie 2021, vol. 133, p. 1–7, ISSN 0044-8249, ISSN 1521-3757, https://doi.org/10.1002/ange.202106323 VL - 60 IS - 43 SP - 1 EP - 6 PB - Wiley-VCH CY - Weinheim AN - OPUS4-53126 LA - mul AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bornemann-Pfeiffer, Martin A1 - Kern, S. A1 - Wander, Lukas A1 - Meyer, Klas A1 - Maiwald, Michael T1 - Modular production involving Benchtop NMR: Current application examples driven by digitalization N2 - The demand for increasing product diversity in the chemical and pharmaceutical industry calls for new production processes that enable greater flexibility. Therefore, plants are needed which can be adapted to new processes in a fast manner and be scaled up and down easily to volatile market demands. Modular production techniques in combination with advanced process analytical technology (PAT) are considered as a promising solution able to fulfil these requirements. The success and acceptance of modular concepts in both new and existing plants is dependent of its reliability, easy applicability, and standardization. In recent past, enormous efforts were made to overcome existing barriers in a superordinate level, e.g. DEXPI [1], ENPRO [2], or MTP [3] naming just a few. Here, we’d like to present a few, more hands-on, application examples which are shown in Figure 1 aiming to increase process flexibility and applicability. This includes: a) The development of an additively manufactured mixer—flow reactor combination for the application inside of NMR instruments. [4] b) The application of automated, model-based approaches for model development and spectra evaluation. c) The application of machine-assisted spectral model building as a genuine alternative to classical model-based approaches [5] d) Improvement of NIR calibration through online available NMR reference data. [6] These examples represent miscellaneous use cases but result of the same fact: the increased use and availability of data through advanced PAT and therefore new opportunities utilizing them. T2 - SMASH - Small Molecule NMR Conference CY - Online meeting DA - 30.08.2021 KW - Process analytical technology KW - NMR spectroscopy KW - Automation PY - 2021 AN - OPUS4-53803 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hoffmann, Martin A1 - Gregor, Christian A1 - Schulz, Michael A1 - Szczepaniak, Mariusz A1 - Mair, Georg T1 - Entwickelt und validiert - Probengeometrie zur Untersuchung von gewickelten Faserverbundproben JF - Lightweight design N2 - Durch die beschriebene, auf eine Umfangsbelastung ausgelegte Probengeometrie werden Fertigung und Einsatz von Druckbehältern nachempfunden. Dafür wurden bereits bestehende Probenformen überarbeitet, um im Probenkörper eine unidirektionale Zugbelastung zu erzeugen. Da die endgültigen Eigenschaften von faserverstärktem Kunststoff erst in der Fertigung entstehen, sind gleiche Fertigungsbedingungen von Proben und Bauteilen wichtig. Die hier vorgestellte Probe verspricht dadurch eine gute Eignung für den Einsatz bei Untersuchungen zum Zeitstandsverhalten. KW - Faserverstärkte Kunststoffe (FVK) KW - Druckbehälter KW - Zeitstand KW - Zugprobe PY - 2012 SN - 1865-4819 VL - 5 SP - 44 EP - 49 PB - Springer Vieweg, Springer Fachmedien Wiesbaden GmbH CY - Wiesbaden AN - OPUS4-26893 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg A1 - Hoffmann, Martin A1 - Saul, Herbert A1 - Spode, Manfred T1 - Betrachtung von Grenzwerten der Restfestigkeit von Composite-Druckgefäßen - Teil 2: Extrapolation der Lastwechsel-Degradation JF - techn N2 - Die aktuelle Praxis, auch die wiederkehrende Prüfung von Druckgefäßen aus Verbundwerkstoffen primär auf die hydraulische Innendruckprüfung abzustellen, ist sowohl im Hinblick auf die Schädigung der Prüfmuster als auch ihrer Aussagekraft kritisch zu bewerten. Daher bringt die BAM Bundesanstalt für Materialforschung und -prüfung zur Absicherung bei der Zulassung von Prüffristen für Composite-Druckgefäße, die älter als fünf Jahre sind, einen neuen Ansatz zur Anwendung. Er ermöglicht eine Zustandsbeschreibung der Population eines Baumusters auf der Basis wiederholt betriebsbegleitend zerstörender Prüfungen. Ein wesentlicher Aspekt dieses Ansatzes ist die Prognose der sicheren Restlebensdauer. Hierbei stellt der Effekt des übermäßigen Verlusts an hydraulischer Lastwechselfestigkeit im Sinne einer Degradation der Festigkeit einen kritischen Punkt in der Prognose der Sicherheit bis zum Lebensdauerende dar. KW - Faserverbundwerkstoffe KW - Druckgefäße KW - Restfestigkeit KW - Degradation KW - Stichprobenprüfung KW - Hydraulische Lastwechselprüfung KW - Lebensdauer KW - Überlebenswahrscheinlichkeit KW - Lastwechselempfindlichkeit PY - 2012 SN - 2191-0073 VL - 2 IS - 10 SP - 38 EP - 43 PB - Springer-VDI-Verl. CY - Düsseldorf AN - OPUS4-26672 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg A1 - Scherer, Florian A1 - Hoffmann, Martin T1 - Type approval of composite gas cylinders - Probabilistic analysis of standards' requirements concerning minimum burst pressure JF - International journal of hydrogen energy N2 - Gas cylinders made from composite materials receive growing popularity in applications where light weight is of advantage. At the same time manufacturers are interested in cutting cost and weight through material reduction for better acceptance of a product, e.g. H2-vehicles. This requires a better understanding of safety relevant properties. The safety determination of current standards is mainly based on the minimum burst pressure of a few specimens. Various research projects were conducted aiming at reducing minimum burst pressure requirements without compromising safety. No satisfying results were found. While looking at reliability aspects it could be concluded, that the minimum burst pressure of unused specimens is not a satisfying criterion for safety during service life. This paper introduces first ideas for a method to determine one aspect of reliability of composite gas cylinders, employing probabilistic analysis of burst pressures of a sample of specimens. This can create potential for saving material cost while granting a higher safety level than the current method. Additionally, degradation over service time can be assessed. KW - Probabilistic approach KW - Regulations KW - Artificial aging KW - Slow burst test KW - Survival rate KW - Degradation trace KW - Isoasfalen PY - 2015 DO - https://doi.org/10.1016/j.ijhydene.2015.01.161 SN - 0360-3199 VL - 40 IS - 15 SP - 5359 EP - 5366 PB - Elsevier Ltd. CY - Oxford AN - OPUS4-32697 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Mair, Georg A1 - Hoffmann, Martin T1 - Assessment of the residual strength thresholds of composite pressure receptacles - Criteria for hydraulic load cycle testing JF - Materials Testing N2 - Die aktuelle Praxis, die wiederkehrende Prüfung von Druckgefäßen aus Verbundwerkstoffen primär auf die hydraulische Innendruckprüfung zu begründen, ist kritisch sowohl bzgl. der Mikro-Schädigung der Prüfmuster als auch bzgl. ihrer Aussagekraft zu bewerten. Deshalb kommt durch die Bundesanstalt für Materialforschung und -prüfung BAM bei der Zulassung von Prüffristen für Composite-Druckgefäße von mehr als 5 Jahren zur Absicherung ein neuer Validierungsansatz zur Anwendung. Er ermöglicht eine Zustandsbeschreibung der Gesamtheit eines Baumusters auf der Basis wiederholt betriebsbegleitend zerstörender Prüfungen. Mit Bezug auf diesen Ansatz wird erläutert, wie die statistische Auswertung von Stichproben und deren perspektivische Extrapolation zur Vorhersage des Endes der Lebensdauer bzw. zumindest des Zeitpunkts der nächsten wiederholten Prüfung erfolgen können. Ferner wird erläutert, wie Zuverlässigkeitsgrenzwerte von der Größe von Druckgefäßen abhängig gemacht werden können und welchen Einfluss der reale Gasdruck auf die Sicherheitsbewertung im Rahmen des Ansatzes der BAM hat. Es wird insbesondere in das zentrale Arbeitsdiagramm des vorgenannten Ansatzes, das für Sicherheitsbewertungen wesentlich ist, eingeführt und erläutert, wie dieses verwendet werden kann. Hierzu wird auch ausgeführt, wie die Füllzyklenzahl und die Lastwechselfestigkeit über die neu eingeführte Größe der spezifischen Füllempfindlichkeit zusammenhängen. N2 - The current practice of periodic retesting of composite pressure receptacles primarily based on the hydraulic pressure test has to be evaluated as critical. This is justified by micro damages caused to the specimen by the test itself and by a lack of informative values. Thus, BAM Federal Institute of Materials Research and Testing uses a new validation approach in the case of retest periods of more than 5 years. It enables the description of the condition of a specific design type series based on destructive tests parallel to operation. With respect to this approach it is explained how the statistical evaluation of sample tests and their extrapolation to end of life or at least to the time of next retesting can be achieved. In addition, it is explained how the reliability limits may be linked to the size and pressure level of the respective composite pressure receptacle. The frame of this safety Approach includes the influence of the maximum working pressure on the safety assessment. One topic of this approach is the introduction of the working diagram essential for safety assessments that allows graphical evaluation of load cycle strength by mean value, scatter and survival rate of samples as well as instruction how to use it. For this, it is explained how the number of filling cycles and the reduction of the respective hydraulic residual cycle strength interacts with the newly introduced value of specific filling sensitivity. KW - Composite cylinders KW - Hydraulic cycle testing KW - Residual strength KW - Sample testing KW - Probabilis-tic PY - 2013 SN - 0025-5300 VL - 55 IS - 2 SP - 121 EP - 129 PB - Hanser CY - München AN - OPUS4-27645 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Schwarzer, Martin A1 - Becker, Roland A1 - Kuhnhardt, Claus A1 - Nehls, Irene T1 - Methodenvergleich zur Bestimmung von extrahierbaren organischem Halogen (EOX) in Bodenproben N2 - Ziel der vorliegenden Untersuchungen, die im Rahmen einer Diplomarbeit der Fachhochschule Lausitz/Senftenberg an der BAM durchgeführt wurden, war ein Vergleich unterschiedlicher Extraktionsverfahren für die Bestimmung von extrahierbarem organischem Halogen (EOX) in Bodenproben. EOX ist ein für die rasche Bewertung der Organochlor- Belastung kontaminationsverdächtiger Flächen wertvoller Summenparameter, der sämtliche mit organischen Lösungsmittel extrahierbare Organohalogenverbindungen erfasst. Gegenwärtig existiert jedoch kein für die Bodenanalytik genormtes Verfahren für die Durchführung von EOX-Bestimmungen. Daher wird in der Praxis auf das für Schlämme und Sedimente entwickelte Verfahren nach DIN 38414 S17 (1990) zurückgegriffen, so auch in der Bundesbodenschutz- und Altlasten-Verordung (BBodSchV). Literaturangaben und Erfahrungen mit der Wiederfindungsrate polarer Extraktionsmittel und moderner Extraktionsverfahren bei Organochlorpestiziden, die eine bedeutende Quelle für EOX in Schlämmen und Böden darstellen, lassen vermuten, dass das genannte Normverfahren systematisch zu Unterbefunden neigen könnte. Für die Untersuchungen wurden an der BAM entwickelte Boden-Referenzmaterialien mit "natürlicher", über jahrzehntelangen Eintrag entstandener DDT- und Lindan-Belastung verwendet. Neben den klassischen Extraktionsverfahren nach Soxhlet kamen die ultraschallunterstützte Extraktion, die Mikrowellen- und die beschleunigte Lösungsmittelextraktion (ASE) jeweils mit Lösungsmitteln unterschiedlicher Polarität zum Einsatz. Extraktionsausbeuten und Wiederholpräzision der einzelnen Varianten wurden verglichen und vor dem Hintergrund der Ergebnisse unabhängiger Verfahren wie der gaschromatographischen Bestimmung der einzelnen Organochlorverbindungen bewertet. Die Polarität des Extraktionsmittels weist auch bei trockenen Böden den größten Einfluss auf die Extraktionsausbeuten der in den untersuchten Proben enthaltenen Organochlorverbindungen auf. Die Mischung Hexan/Aceton (1:1), die sich für die Extraktion verschiedener organischer Parameter bewährt hat, ist hinsichtlich der EOX-Analytik der existierenden Norm überlegen. T3 - BAM Forschungsberichtreihe - 263 PY - 2003 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-1884 SN - 978-3-86509-083-4 SN - 0938-5533 VL - 263 SP - 1 EP - 64 PB - Wirtschaftsverlag NW CY - Bremerhaven AN - OPUS4-188 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Tidjani, Adams A1 - Wald, Oliver A1 - Brzezinka, Klaus-Werner A1 - Turky, Gamal A1 - Goering, Harald A1 - Schartel, Bernhard A1 - Schönhals, Andreas T1 - Dielectric and gas transport properties of polypropylene-clay nanocomposites T2 - DPG-Frühjahrstagung (Polymerphysik), Fachverband CPP, Themenkreis 3 T2 - DPG-Frühjahrstagung (Polymerphysik), Fachverband CPP, Themenkreis 3 CY - Regensburg, Germany DA - 2002-03-11 PY - 2002 AN - OPUS4-3623 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Wald, Oliver A1 - Turky, Gamal A1 - Goering, Harald A1 - Brzezinka, Klaus-Werner A1 - Schartel, Bernhard A1 - Schönhals, Andreas T1 - Dielectric Relaxation and Gas Transport Properties in Polypropylene Based Nanocomposites T2 - ACS 2002 Biennial Symposium: Polymeric Nanomaterials T2 - ACS 2002 Biennial Symposium: Polymeric Nanomaterials CY - Rohnert Park, CA, USA DA - 2002-11-17 PY - 2002 AN - OPUS4-3622 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Tidjani, Adams A1 - Wald, Oliver A1 - Brzezinka, Klaus-Werner A1 - Turky, Gamal A1 - Goering, Harald A1 - Schartel, Bernhard A1 - Schönhals, Andreas T1 - Dielectric and gas transport properties of polypropylene-clay nanocomposites JF - Verhandlungen der Deutschen Physikalischen Gesellschaft T2 - Frühjahrstagung des Arbeitskreises Festkörperphysik bei der DPG CY - Regensburg, Germany DA - 2002-03-11 PY - 2002 SN - 0420-0195 SN - 0372-5448 SN - 0343-9216 IS - CPP 5.4 SP - 425 CY - Bad Honnef AN - OPUS4-2036 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Tidjani, Adams A1 - Wald, Oliver A1 - Turky, Gamal A1 - Goering, Harald A1 - Brzezinka, Klaus-Werner A1 - Schartel, Bernhard A1 - Schönhals, Andreas T1 - Polypropylene/Clay Nanocomposites - Gas Transport Characteristics and Molecular Mobility T2 - Polydays 2002 T2 - Polydays 2002 CY - Berlin, Germany DA - 2002-09-30 PY - 2002 SP - 1(?) EP - 2(?) AN - OPUS4-2038 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Wald, Oliver A1 - Turky, Gamal A1 - Goering, Harald A1 - Brzezinka, Klaus-Werner A1 - Schartel, Bernhard A1 - Schönhals, Andreas T1 - Dielectric Relaxation and Gas Transport Properties in Polypropylene Based Nanocomposites T2 - Proceedings of the ACS 2002 Biennial Symposium "Polymeric Nanomaterials" T2 - ACS 2002 Biennial Symposium "Polymeric Nanomaterials" CY - Rohnert Park, CA, USA DA - 2002-11-17 PY - 2002 SP - 1(?) EP - 3(?) AN - OPUS4-2035 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Turky, Gamal A1 - Goering, Harald A1 - Wald, Oliver A1 - Schartel, Bernhard A1 - Schönhals, Andreas T1 - Polypropylene/Clay Nanocomposites - Dielectric Relaxation and Gas Transport Properties T2 - Proceedings of the 2nd International Conference on Broadband Dielectric Spectroscopy and Its Applications T2 - 2nd International Conference on Broadband Dielectric Spectroscopy and Its Applications CY - Leipzig, Germany DA - 2002-09-02 PY - 2002 AN - OPUS4-2037 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gallo, Emanuela A1 - Schartel, Bernhard A1 - Schmaucks, G. A1 - von der Ehe, Kerstin A1 - Böhning, Martin T1 - Effect of well dispersed amorphous silicon dioxide in flame retarded styrene butadiene rubber JF - Plastics rubber and composites N2 - Spherically shaped amorphous silicon dioxide with broad size particle distribution was used in combination with aluminium trihydroxide (ATH) in styrene butadiene rubber composites. The pyrolysis, flammability, fire properties, flame spread and gas diffusion were investigated. The kind and amount of ATH, but in particular the fine silicon dioxide chosen as an additive, influenced the thermal decomposition and fire behaviour of styrene butadiene rubber composites. Gravimetric gas sorption measurements showed that the gas diffusion was systematically lower with silicon dioxide. The initial pyrolysis gas release was hindered, increasing the temperature at which decomposition begins as well as the ignition time in fire tests. During combustion, ATH and silicon dioxide accumulate on the surface of the specimen, forming a residual protective layer. A reduced peak heat release rate and fire spread were observed. The addition of a special kind of silicon dioxide is proposed to play a key role in optimising fire retardancy. KW - Flame retardancy KW - Styrene butadiene rubber KW - SBR KW - Silicon dioxide KW - Aluminium trihydroxide KW - ATH PY - 2013 DO - https://doi.org/10.1179/1743289812Y.0000000012 SN - 1465-8011 SN - 1743-2898 VL - 42 IS - 1 SP - 34 EP - 42 PB - IOM Communications CY - London, UK AN - OPUS4-27626 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sanchez-Martin, Pedro A1 - Becker, Roland A1 - Toepel, J. A1 - Gorbushina, Anna T1 - An improved test for the evaluation of hydrocarbon degradation capacities of diesel-contaminating microorganisms JF - International Biodeterioration & Biodegradation N2 - The development of a test to evaluate the degradation of semi-volatile fuels as diesel by microorganisms is presented. This method is based on the principles described in the CEC-L-103 Standard procedure that is exclusively meant for testing the biodegradability of non-volatile lubricants. Therefore, significant modifications involve aseptic conditions for testing specific microorganisms and conducting the test in closed vessels avoiding evaporation losses, while fuel quantification using gas chromatography-flame ionization detection (GC-FID) is retained. It is suggested that the modified procedure should enable routine application for semi-volatile hydrocarbon-based fuels. GC-FID provides additionally valuable information on the alteration of fuel component patterns during biodegradation. The procedure was successfully tested using two bacteria (Pseudomonas aeruginosa and Sphingomonas sp.) and two yeasts (Moesziomyces sp. and Candida sp.) isolated from real diesel contamination cases. All tested microorganisms caused a significant degradation of diesel fuel achieving hydrocarbon degradation percentages ranging from 23% to 35%. Specific aspects on the test modification and prospects for further modification regarding targeted investigations in the field of fuel contamination by microorganisms are briefly discussed. KW - Biofouling KW - Bacteria KW - Fungi KW - CEC-L-103 KW - GC-FID KW - Reference organisms PY - 2018 DO - https://doi.org/10.1016/j.ibiod.2018.01.009 SN - 0964-8305 VL - 129 SP - 89 EP - 94 PB - Elsevier AN - OPUS4-44524 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kreutzbruck, Marc A1 - Thomas, Hans-Martin A1 - Sickert, Roland A1 - Casperson, Ralf A1 - Boehm, Rainer A1 - Allweins, K. A1 - Lemke, G. T1 - A numerical study of the inclusion problem in electromagnetic testing JF - MP materials testing KW - FEM KW - Eddy Current Testing (ECT) KW - Eddy Current (EC) PY - 2009 SN - 0025-5300 VL - 51 IS - 11-12 SP - 819 EP - 827 PB - Hanser CY - München AN - OPUS4-20507 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strommer, Bettina A1 - Battig, Alexander A1 - Frasca, Daniele A1 - Schulze, Dietmar A1 - Huth, Christian A1 - Böhning, Martin A1 - Schartel, Bernhard T1 - Multifunctional Property Improvements by Combining Graphene and Conventional Fillers in Chlorosulfonated Polyethylene Rubber Composites JF - ACS Applied Polymer Materials N2 - The incorporation of nanoparticles like multilayer graphene (MLG) into elastomeric composites boosts their technical performance, such as their mechanical behavior and electrical conductivity. Common filler types (carbon black (CB) and aluminum trihydroxide (ATH)) generally fulfill single, specific purposes and are often used in high loadings. CB typically reinforces rubber mechanically, while ATH increases flame retardancy. Small amounts of MLG reduce these high filler contents and maintain the multifunctional characteristics of rubber composites. In chlorosulfonated polyethylene (CSM) + ATH, an intrinsically flame-retardant rubber was designed to achieve the highest standards such as maximum average of heat emission (MARHE) <90 kW m−2, 3 phrMLG was substituted for 15 phr CB and/or 3 phr ATH via an industrially applicable processing approach. Replacing either CB or ATH resulted in a property profile that was multifunctionally improved in terms of features such as mechanical performance, reduced sorption, and flame retardance. MLG nanocomposites are reported to show promise as an industrially utilizable route to obtain multifunctional high-performance rubbers. KW - Nanocomposites KW - Rubber KW - Multilayer graphene KW - Flame retardancy KW - Synergy KW - Nanoparticles KW - Elastomers PY - 2022 DO - https://doi.org/10.1021/acsapm.1c01469 SN - 2637-6105 VL - 4 IS - 2 SP - 1021 EP - 1034 PB - ACS Publ. CY - Washington, DC AN - OPUS4-54330 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Böhning, Martin A1 - Goering, Harald A1 - Fritz, Andreas A1 - Brzezinka, Klaus-Werner A1 - Turky, Gamal A1 - Schönhals, Andreas A1 - Schartel, Bernhard T1 - Dielectric Study of Molecular Mobility in Poly(propylene-graft-maleic anhydride)/Clay Nanocomposites JF - Macromolecules N2 - Polymer/clay nanocomposite materials based on poly(propylene-graft-maleic anhydride) (PPgMAH) and two different organophilic modified clays were investigated by dielectric relaxation spectroscopy (DRS). In contrast to ungrafted polypropylene (PP), PPgMAH shows a dielectrically active relaxation process which can be assigned to localized fluctuations of the polar maleic anhydride groups. Its relaxation rate exhibits an unusual temperature dependence, which could be attributed to a redistribution of water molecules in the polymeric matrix. This is confirmed by a combination of Raman spectroscopy and thermogravimetric experiments (TGA) with real-time dielectric measurements under controlled atmospheres. In the nanocomposites this relaxation process is shifted to higher frequencies up to 3 orders of magnitude compared to the unfilled polymer. This indicates a significantly enhanced molecular mobility in the interfacial regions. In the nanocomposite materials a separate high-temperature process due to Maxwell-Wagner-Sillars (MWS) polarization was observed. The time constant of this MWS process can be correlated with characteristic length scales in nanocomposites and therefore provides additional information on dispersion and delamination/exfoliation of clay platelets in these materials. These properties also influence the diffusivity of the water molecules as revealed by real-time dielectric investigations. KW - Polymer clay nanocomposites KW - Molecular mobility KW - Dielectric relaxation spectroscopy PY - 2005 DO - https://doi.org/10.1021/ma048315c SN - 0024-9297 SN - 1520-5835 VL - 38 IS - 7 SP - 2764 EP - 2774 PB - American Chemical Society CY - Washington, DC AN - OPUS4-7281 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Böhning, Martin A1 - Goering, Harald A1 - Schönhals, Andreas A1 - Schartel, Bernhard A1 - Mach, Reinhard A1 - Maneck, Heinz-Eberhard T1 - Preparation and Characterisation of Nanoscaled Nanostructured Materials T2 - Nanofair 2004 T2 - Nanofair 2004 CY - Karlsruhe, Germany DA - 2004-11-22 PY - 2004 AN - OPUS4-7296 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kreutzbruck, Marc A1 - Thomas, Hans-Martin A1 - Casperson, Ralf A1 - Reimund, Verena A1 - Blome, Mark A1 - Allweins, K. A1 - Lembke, G. T1 - Magnetic response field of spherical defects on non-destructive evaluation T2 - NDE 2009 (Proceedings) T2 - NDE 2009 CY - Tiruchirappalli, India DA - 2009-12-10 KW - Electromagnetic testing KW - Spherical defects KW - Finite element method PY - 2009 SP - 271 EP - 275 AN - OPUS4-20831 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lenz, J. A1 - Pospiech, D. A1 - Paven, M. A1 - Albach, R. W. A1 - Günther, Martin A1 - Schartel, Bernhard A1 - Voit, B. T1 - Improving the Flame Retardance of Polyisocyanurate Foams by Dibenzo[d,f][1,3,2]dioxaphosphepine 6-Oxide-Containing Additives JF - Polymers N2 - A series of new flame retardants (FR) based on dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (BPPO) incorporating acrylates and benzoquinone were developed previously. In this study, we examine the fire behavior of the new flame retardants in polyisocyanurate (PIR) foams. The foam characteristics, thermal decomposition, and fire behavior are investigated. The fire properties of the foams containing BPPO-based derivatives were found to depend on the chemical structure of the substituents. We also compare our results to state-of-the-art non-halogenated FR such as triphenylphosphate and chemically similar phosphinate, i.e. 9,10-dihydro-9-oxa-10- phosphaphenanthrene-10-oxide (DOPO), based derivatives to discuss the role of the phosphorus oxidation state. KW - Polyisocyanurate KW - Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide KW - Phospha-Michael addition KW - Flame retardant KW - Foams PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-485590 DO - https://doi.org/10.3390/polym11081242 SN - 2073-4360 VL - 11 IS - 8 SP - Article 1242 PB - MDPI AN - OPUS4-48559 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin A1 - Dittmann, Florian A1 - Kromm, Arne A1 - Varfolomeev, Igor A1 - Kannengießer, Thomas T1 - Einfluss der Nahtgeometrie auf den Eigenspannungsabbau unter Verwendung von Low Transformation Temperature (LTT) – Schweißzusätzen N2 - Low Transformation Temperature (LTT)-Schweißzusätze stellen einen innovativen Ansatz zur Erhöhung der Ermüdungsfestigkeit geschweißter Konstruktionen dar. LTT-Schweißzusätze zeichnen sich durch eine martensitische Phasenumwandlung nahe der Raumtemperatur aus, welche Druckeigenspannungen in der Schweißnaht und der Wärmeeinflusszone (WEZ) generieren. Dieser Vortrag fokussiert sich auf die gezielte Einbringung zusätzlicher LTT-Lagen an ermüdungskritischen Stellen von konventionell geschweißten Verbindungen. Dies ermöglicht eine ökonomische Anwendung, ohne dass die Schweißnahtintegrität zu stark beeinflusst wird. Die Auswirkungen zusätzlicher LTT-Lagen wurden anhand geschweißter Längssteifen aus hochfestem Stahl hinsichtlich der chemischen Zusammensetzung und der Eigenspannungen untersucht. Unter Variation der Schweißgeschwindigkeit und Abstand zur konventionellen Naht konnten 3 unterschiedliche Nahtausführungen des Chrom-Nickellegierten LTT-Zusatzes bewertet werden. Die chemische Zusammensetzung wurde mittels OES-Analysen untersucht. Dabei stellte heraus, dass die Aufmischung in allen Varianten sehr ähnlich war trotz teils unterschiedlicher LTT-Volumina. Härtebestimmungen ergaben in allen 3 Varianten eine ähnliche Härte. Daraus lässt sich annehmen, dass die Martensitstarttemperatur bei allen Nahtvarianten ähnlich ist. Röntgenografische Eigenspannungsmessungen belegen, dass die Eigenspannungen am versa-genskritischen Nahtübergang bei Einsatz von LTT-Schweißzusätzen deutlich abgesenkt werden. Während die konventionelle Schweißnaht Zugeigenspannungen von ca. 350 MPa aufweist, können an den LTT-Nähten teilweise Druckeigenspannungen von bis zu -150 MPa nachgewiesen werden. Je höher der Abstand zur konventionellen Naht und je größer das eingebrachte LTT-Volumen ist, umso stärker sind die Eigenspannungsreduzierungen am Nahtübergang. Da in allen 3 Varianten eine ähnliche Martensitstarttemperatur angenommen werden kann, ist somit die Geometrische Komponente der LTT-Zusatzlage ein entscheidender Faktor für die Eigenspannungsreduzierung. T2 - AWT FA 13 CY - Wolfsburg, Germany DA - 19.03.2024 KW - Chemische Zusammensetzung, KW - LTT KW - Nahtgeometrie KW - Eigenspannungen PY - 2024 AN - OPUS4-60135 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Günther, Martin A1 - Levchik, S. V. A1 - Schartel, Bernhard T1 - Bubbles and collapses: Fire phenomena of flame-retarded flexible polyurethane foams JF - Polymer for Advanced Technologies N2 - Flexible polyurethane foams (FPUF) are easy to ignite and exhibit rapid flame spread. In this paper, the fire phenomena of two standard foam formulations containing tris (1,3-dichloro-2-propyl) phosphate (FR-2) and a halogen-freepoly (ethyl ethylene phosphate) (PNX), respectively, as flame retardants are compared. A multimethodological approach is proposed which combines standard fire tests as well as new investigatory approaches. The thermophysical properties of the foams were determined by thermogravimetric analysis (TG), reaction to small flames was studied by means of the limiting oxygen index (LOI) and UL 94 HBF test, and the burning behavior was investigated with the cone calorimeter. Further, temperature development in burning cone calorimeter samples was monitored using thermocouples, and rheological measurements were performed on pyrolyzed material, delivering insight into the dripping behavior of the foams. This paper gives comprehensive insight into the fire phenomena of flame-retarded FPUFs that are driven by the two-step decomposition behavior of the foams. LOI and UL 94 HBF tests showed a reduced flammability and reduced tendency to drip for the flame-retarded foams. TG and cone calorimeter measurements revealed that the two-step decomposition behavior causes two stages during combustion, namely structural collapse and pool fire. The flame-retardant mode of action was identified to take place primarily during the foam collapse and be based mainly on flame inhibition. However, some condensed-phase action was been measured, leading to significantly increased melt viscosity and improved dripping behavior for foams containing PNX. KW - Burning behavior KW - Flame retardant KW - Flexible PU foam PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-512145 DO - https://doi.org/10.1002/pat.4939 SN - 1042-7147 SN - 1099-1581 VL - 31 IS - 10 SP - 2185 EP - 2198 PB - Wiley Online Libary AN - OPUS4-51214 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Shabir Mahr, Muhammad A1 - Hübert, Thomas A1 - Sabel, Martin A1 - Schartel, Bernhard A1 - Bahr, Horst A1 - Militz, H. T1 - Fire retardancy of sol-gel derived titania wood-inorganic composites JF - Journal of materials science N2 - Sol–gel technology was applied in tailoring novel wood-made-inorganic composites with improved thermal and fire properties. In practice, composites materials were prepared by impregnating pine sapwood wood with nano-scaled precursor solutions derived from titanium(IV) isopropoxide followed by a thermal curing process. Thermal and fire properties were evaluated by thermal analysis and cone calorimetry, whereas flammability was specified by oxygen index (LOI) and UL 94 test. Peak heat release rates were moderately reduced indicating fire retardance potential in terms of flame spread attributed to the appropriate protection layer action of the titania-based depositions. LOI (oxygen index) values of these composites were increased up to 38 vol.% in comparison to 23 vol.% for untreated wood. The flame retardancy performance depends on the fire scenario and is strongly influenced by wood loading and crackfree deposition of the titania layers inside the composite. PY - 2012 DO - https://doi.org/10.1007/s10853-012-6628-3 SN - 0022-2461 SN - 1573-4803 VL - 47 IS - 19 SP - 6849 EP - 6861 PB - Springer Science + Business Media B.V. CY - Norwell, Mass. AN - OPUS4-26235 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dey, Anika A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Die Klassifizierung von Oberflächenfehlern in Schienen mit der Wirbelstromprüfung T2 - DGZfP-Jahrestagung 2009 N2 - Die Rissbildung durch Rollkontaktermüdung, der Materialverschleiß oder die Bildung von Einzelfehlern – aufgrund solcher Schädigungsarten wird die Lebensdauer der Schiene signifikant verkürzt. Mit entsprechenden Methoden der ZfP können diese Schäden an Schienen erkannt und bewertet werden. Ein sehr geeignetes Verfahren zur Feststellung von Schädigungen und Unregelmäßigkeiten in der Oberfläche ist die Wirbelstromprüfung. Die zerstörungsfreie Prüfung der Schienenoberfläche durch das Wirbelstromverfahren wurde ursprünglich zur Detektion von Rollkontaktermüdungsrissen entwickelt. Anhand von Ergebnissen aus zahlreichen Prüfeinsätzen in den letzten Jahren wurde außerdem festgestellt, dass unter anderen auch Fehler wie Squats, Belgrospis, Eindrückungen oder Riffel in den Wirbelstromsignalen erkannt werden können. Aufgrund dieser Erfahrungen ist es möglich geworden, den Oberflächenfehlern in der Schiene ein charakteristisches Wirbelstromsignal zuzuordnen. Somit eröffnet sich die Möglichkeit die Wirbelstromprüfung an Schienen nicht ausschließlich zur Detektion von Rollkontaktermüdungsris-sen zu verwenden, sondern auch zur Feststellung von Einzelfehlern oder Materialveränderungen in der Oberfläche. Zusätzlich besteht das Potential durch Ultraschall erfasste Anzeigen, wie z.B. Schweißnähte, Squats etc. mit der Wirbelstromprüfung zu bestätigen und die Aussagesicherheit und Qualität dieser Prüfmethoden noch zu erhöhen. T2 - DGZfP-Jahrestagung 2009 CY - Münster, Deutschland DA - 18.05.2009 KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Schienenfehler KW - Eisenbahnschiene PY - 2009 SN - 978-3-940283-16-0 IS - DGZfP-BB 115 (Di.2.B.3) SP - 1 EP - 9 AN - OPUS4-20512 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Kreutzbruck, Marc A1 - Thomas, Hans-Martin A1 - Casperson, Ralf A1 - Reimund, Verena A1 - Blome, Mark A1 - Allweins, K. A1 - Lembke, G. ED - Mazal, Pavel T1 - Magnetic response field of spherical defects within conductive components T2 - 5th International workshop of NDT experts - NDT in progress 2009 (Proceedings) T2 - 5th International workshop of NDT experts - NDT in progress 2009 CY - Prague, Czech Republic DA - 2009-10-12 KW - Electromagnetic testing KW - Spherical defects KW - Finite element method PY - 2009 SN - 978-80-214-3968-9 SP - 163 EP - 172 AN - OPUS4-20336 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Martin A1 - Lorenzetti, A. A1 - Schartel, Bernhard T1 - Bubbles and Collapses: Fire Phenomena of Polyurethane Foams N2 - This work investigates the fire phenomena of rigid polyurethane foams (RPUFs) in detail. To elucidate structure-property relationships, systematically varied sets of materials were prepared covering polyurethane, polyisocyanurate-polyurethane and flame retarded polyurethane foams. Advanced cone calorimeter investigations provide insight into the fire behavior under forced flaming conditions. Thermocouples inside specimens give information about the temperature gradient during combustion. Furthermore, fire phenomena were characterized using cross sections of quenched samples and the scanning electron microscope. By using a Multi methodological approach and systematically varied sets of foam materials, new insights into the burning of RPUFs were won. For the flame retarded foams, the dominant flame retardant mode of action changed with density. PIR foams exhibited a cellular structure in the residue leading to the superior fire performance compared to polyurethane foams. The understanding of fire phenomena contributes to future development of tailored flame retardant strategies for RPUFs. T2 - AOFSM’3, 3rd Asia-Oceania Symposium for Fire Safety Materials Science and Engineering CY - Shanghai, China DA - 24.10.2019 KW - PU-Foam KW - Fire behaviour PY - 2019 AN - OPUS4-49457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lenz, J. U. A1 - Pospiech, D. A1 - Komber, H. A1 - Korwitz, A. A1 - Kobsch, O. A1 - Paven, M. A1 - Albach, R. W. A1 - Günther, Martin A1 - Schartel, Bernhard T1 - Effective halogen-free flame-retardant additives for crosslinked rigid polyisocyanurate foams: Comparison of chemical structures JF - Materials N2 - The impact of phosphorus-containing flame retardants (FR) on rigid polyisocyanurate (PIR) foams is studied by systematic variation of the chemical structure of the FR, including non-NCO-reactive and NCO-reactive dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (BPPO)- and 9,10 dihydro-9-oxa-10 phosphaphenanthrene-10-oxide (DOPO)-containing compounds, among them a number of compounds not reported so far. These PIR foams are compared with PIR foams without FR and with standard FRs with respect to foam properties, thermal decomposition, and fire behavior. Although BPPO and DOPO differ by just one oxygen atom, the impact on the FR properties is very significant: when the FR is a filler or a dangling (dead) end in the PIR polymer network, DOPO is more effective than BPPO. When the FR is a subunit of a diol and it is fully incorporated in the PIR network, BPPO delivers superior results. KW - Flame retardant; KW - Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO KW - 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO KW - Polyisocyanurate; PIR KW - Rigid foam KW - Cone calorimeter KW - Pudovik reaction PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-567712 DO - https://doi.org/10.3390/ma16010172 SN - 1996-1944 VL - 16 IS - 1 SP - 1 EP - 22 PB - MDPI CY - Basel AN - OPUS4-56771 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Günther, Martin A1 - Lorenzetti, A. A1 - Schartel, Bernhard T1 - Fire Phenomena of Rigid Polyurethane Foams JF - Polymers N2 - Rigid polyurethane foams (RPUFs) typically exhibit low thermal inertia, resulting in short ignition times and rapid flame spread. In this study, the fire phenomena of RPUFs were investigated using a multi-methodological approach to gain detailed insight into the fire behaviour of pentaneand water-blown polyurethane (PUR) as well as pentane-blown polyisocyanurate Polyurethane (PIR) foams with densities ranging from 30 to 100 kg/m3. Thermophysical properties were studied using thermogravimetry (TG); flammability and fire behaviour were investigated by means of the limiting oxygen index (LOI) and a cone calorimeter. Temperature development in burning cone calorimeter specimens was monitored with thermocouples inside the foam samples and visual investigation of quenched specimens’ cross sections gave insight into the morphological changes during burning. A comprehensive investigation is presented, illuminating the processes taking place during foam combustion. Cone calorimeter tests revealed that in-depth absorption of radiation is a significant factor in estimating the time to ignition. Cross sections examined with an electron scanning microscope (SEM) revealed a pyrolysis front with an intact foam structure underneath, and temperature measurement inside burning specimens indicated that, as foam density increased, their burning behaviour shifted towards that of solid materials. The superior fire performance of PIR foams was found to be based on the cellular structure, which is retained in the residue to some extent. KW - Foam KW - Polyurethane KW - Fire behaviour KW - Flammability PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-465577 DO - https://doi.org/10.3390/polym10101166 SN - 2073-4360 VL - 10 IS - 10 SP - 1166-1 EP - 1166-22 PB - MDPI AN - OPUS4-46557 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strommer, Bettina A1 - Schulze, Dietmar A1 - Schartel, Bernhard A1 - Böhning, Martin T1 - The quantification of anisotropy in graphene/natural rubber nanocomposites: Evaluation of the aspect ratio, concentration, and crosslinking JF - Journal of Applied Polymer Science N2 - In the processing of nanocomposites, high shear stresses at elevated tempera-tures orient two-dimensional nanoparticles like graphene. This orientationleads to anisotropic mechanical, thermal or barrier properties of the nanocom-posite. This anisotropy is addressed in this study by comparing graphene (few-layer graphene, FLG) with a nanoscaled carbon black (nCB) at a filler contentof 3 phr, by varying the vulcanization, and by comparing different FLG con-tents. Transmission electron microscopy gives insight into the qualitative ori-entation in the nanocomposite with FLG or nCB. The storage moduli paralleland normal to the orientation reveal the direction dependency of reinforce-ment through dynamic mechanical analysis (DMA). Dimensional swellingmeasurements show a restriction of the expansion parallel to the FLG orienta-tion, and an increased expansion normal to the orientation. The vulcanizationsystem and crosslinking determine the respective level of property values, andhigher crosslinking densities increase the anisotropy in DMA resulting invalues of up to 2.9 for the quantified anisotropy factor. With increasing FLGcontent, the anisotropy increases. A comparison of the results reveals swellingmeasurements as the most suitable method for the determination of anisot-ropy. Compared to recent literature, the presented processing induces higheranisotropy, leading to higher reinforcing effects in the direction of orientation KW - Natural rubber KW - Graphene KW - Nanocomposite KW - Mechanical properties KW - Swelling PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-571522 DO - https://doi.org/10.1002/app.53753 SN - 1097-4628 VL - 140 IS - 16 SP - 1 EP - 15 PB - Wiley online library CY - Hoboken, New Jersey (USA) AN - OPUS4-57152 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard A1 - Frasca, Daniele A1 - Schulze, Dietmar A1 - Wachtendorf, Volker A1 - Krafft, Bernd A1 - Morys, Michael A1 - Böhning, Martin A1 - Rybak, Thomas T1 - Multilayer graphene rubber nanocomposites JF - AIP Conference Proceedings N2 - Multilayer Graphene (MLG), a nanoparticle with a specific surface of BET = 250 m²/g and thus made of only approximately 10 graphene sheets, is proposed as a nanofiller for rubbers. When homogenously dispersed, it works at low loadings enabling the replacement of carbon black (CB), increase in efficiency, or reduction in filler concentration. Actually the appropriate preparation yielded nanocomposites in which just 3 phr are sufficient to significantly improve the rheological, curing and mechanical properties of different rubbers, as shown for Chlorine-Isobutylene-Isoprene Rubber (CIIR), Nitrile-Butadiene Rubber (NBR), Natural Rubber (NR), and Styrene-Butadiene Rubber (SBR). A mere 3 phr of MLG tripled the Young’s modulus of CIIR, an effect equivalent to 20 phr of carbon black. Similar equivalents are observed for MLG/CB mixtures. MLG reduces gas permeability, increases thermal and electrical conductivities, and retards fire behavior. The later shown by the reduction in heat release rate in the cone calorimeter. The higher the nanofiller concentration is (3 phr, 5 phr, and 10 phr was investigated), the greater the improvement in the properties of the nanocomposites. Moreover, the MLG nanocomposites improve stability of mechanical properties against weathering. An increase in UV-absorption as well as a pronounced radical scavenging are proposed and were proved experimentally. To sum up, MLG is interesting as a multifunctional nanofiller and seems to be quite ready for rubber development. T2 - TOP 2016, VIII International Conference on “Times of Polymers and Composites” CY - Naples, Italy DA - 19.06.2016 KW - Graphene KW - Nanocomposite KW - Rubber PY - 2016 SN - 978-0-7354-1390-0 DO - https://doi.org/10.1063/1.4949621 SN - 0094-243X SN - 1551-7616 VL - 1736 SP - 020046, 1 EP - 4 PB - AIP AN - OPUS4-36864 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dey, Anika A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Die Wirbelstromprüfung als Hilfsmittel für die Schieneninstandhaltung T2 - DGZfP-Jahrestagung 2010 N2 - Die zerstörungsfreie Oberflächenprüfung an verlegten Eisenbahnschienen mit Wirbelstrom hat in den letzten Jahren durch ständige Weiterentwicklung und Verifizierung enorm an Bedeutung gewonnen. Es wurde u.a. angestrebt zuverlässige Planungsgrößen für den Einsatz von Instandhaltungsmaßnahmen zu erhalten, durch deren gezielten Einsatz Risswachstum unterbunden werden kann. Die Ursache für das Wachstum von Rissen in der Schiene liegt in der Materialermüdung des Werkstoffes infolge der Betriebsbelastungen im Rad-Schiene-Kontakt. Nach einer gewissen Beanspruchungsdauer kommt es an den Kontaktflächen der Fahrkante zu einer Kaltverfestigung des Schienenstahls. Durch fortschreitende Verfestigung des kontaktbeanspruchten Oberflächenbereichs der gehärteten Schicht wird der Werkstoff spröde und es bilden sich feine Risse aus. Die Risse wachsen anfangs unter einem flachen Winkel in das Schieneninnere hinein, neigen dann aber ab einem gewissen Stadium dazu in das Innere des Schienenkopfes abzukippen, was im Extremfall zu einem Schienenbruch führen kann. Diese Rollkontaktermüdungsrisse, auch genannt Head Checks, entstehen bevorzugt in der Fahrkante von bogenäußeren Schienen. Die Anwendung der Wirbelstromprüfung an der Schiene wurde bisher zur Ermittlung der Schädigungstiefe dieser Rollkontaktermüdungsrisse eingesetzt. Das Wirbelstromverfahren besitzt die Eigenschaft, sehr empfindlich auf alle Veränderungen der Materialeigenschaften an der Oberfläche zu reagieren. Daher wurde festgestellt, dass sich neben der Detektion von Rissen auch Fehler wie Eindrückungen oder Schlupfwellen, bis hin zu Materialveränderungen durch Schweißen oder Aufhärtungen in der Schienenoberfläche bestimmen lassen. Die Wirbelstromprüfung besitzt daher das Potenzial, mögliche Orte der Entstehung von Ermüdungsrissen in einem extrem frühzeitigen Stadium nachzuweisen. Ziel ist es, die rissgefährdeten Zonen schon im Zustand der Kaltverfestigung zu identifizieren. Dadurch können sich neue Aspekte für die präventive Schieneninstandhaltung ergeben. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 10.05.2010 KW - Wirbelstromprüfung KW - Rollkontaktermüdung KW - Schienenfehler KW - Eisenbahnschiene PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P68) SP - 1 EP - 7 CY - Berlin AN - OPUS4-21886 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Kreutzbruck, Marc A1 - Thomas, Hans-Martin A1 - Casperson, Ralf A1 - Reimund, Verena A1 - Blome, Mark A1 - Allweins, K. A1 - Lembke, G. ED - Thompson, D.O. ED - Chimenti, D.E. T1 - Magnetic response field of spherical defects within conductive components T2 - QNDE conference 2010 - Review of progress in quantitative nondestructive evaluation (Proceedings) N2 - The determination of magnetic distortion fields caused by inclusions hidden in a conductive matrix using homogeneous current flow needs to be addressed in multiple tasks of electromagnetic non-destructive testing and materials science. This includes a series of testing problems such as the detection of tantalum inclusions hidden in niobium plates, metal inclusion in a nonmetallic base material or porosity in aluminum laser welds. Unfortunately, straightforward tools for an estimation of the defect response fields above the sample using pertinent detection concepts are still missing. In this study the Finite Element Method (FEM) was used for modeling spherically shaped defects and an analytical expression developed for the strength of the response field including the conductivity of the defect and matrix, the sensor-to-inclusion separation and the defect size. Finally, the results also can be useful for Eddy Current Testing problems, by taking the skin effect into consideration. T2 - 36th Annual Review of Progress in Quantitative Nondestructive Evaluation CY - Kingston, RI, USA DA - 2009-07-26 KW - Electromagnetic testing KW - Spherical defects KW - Finite element method PY - 2010 SN - 978-0-7354-0748-0 SN - 0743-0760 SN - 0094-243X N1 - Serientitel: AIP conference proceedings – Series title: AIP conference proceedings SP - 1 EP - 8 CY - Melville, NY AN - OPUS4-21815 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Dey, Anika A1 - Pohl, Rainer A1 - Reimund, Verena A1 - Thomas, Hans-Martin T1 - Einfluss lokaler Aufhärtung ferritischer Stähle auf die Risstiefenbestimmung mit dem Wirbelstromprüfverfahren T2 - DGZfP-Jahrestagung 2010 N2 - Mechanische Belastung wie z. B. der Rollkontakt zwischen den Rollen und Lagerringen eines Wälzlagers oder der Rad-Schiene-Kontakt bei der Eisenbahn führen bei ferritischen Stählen zu einer Aufhärtung der Oberfläche. Die mit der Aufhärtung verbundene Versprödung begünstigt die Entstehung von Ermüdungsrissen. Zur Risstiefenbestimmung mit dem Wirbelstromprüfverfahren werden in der Regel Kalibrierkörper mit künstlichen Testfehlern aus dem Grundwerkstoff des Prüfteils verwendet. Die betriebsbedingte Aufhärtung der Prüfteiloberfläche bleibt bei der Kalibrierung unberücksichtigt. Die lokale Aufhärtung der Oberfläche führt zu einem ortsabhängigen Offset des Wirbelstromsignals in Richtung der Rissanzeigen und somit zu einer Überbewertung der Risstiefe. Bei einzelnen Rissen lässt sich der Effekt kompensieren, in dem das Wirbelstromgerät neben jedem Riss abgeglichen bzw. die Differenz zwischen dem Offset und der Rissanzeige berechnet wird. In der Realität liegen die Ermüdungsrisse jedoch oft so dicht nebeneinander, dass auf Grund der Überlagerung benachbarter Rissanzeigen weder ein Abgleich zwischen den Rissen noch eine Bestimmung des Offsets möglich ist. Finite-Elemente-Berechnungen ermöglichen es, die in der Realität stets kombiniert auftretenden Wirbelstromsignale der Ermüdungsrisse und der Oberflächenaufhärtung getrennt zu simulieren, um Erkenntnisse für eine Verbesserung der Risstiefenbestimmung zu erlangen. T2 - DGZfP-Jahrestagung 2010 CY - Erfurt, Deutschland DA - 10.05.2010 PY - 2010 SN - 978-3-940283-26-9 IS - DGZfP-BB 122 (P25) SP - 1 EP - 5 CY - Berlin AN - OPUS4-21887 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Schartel, Bernhard A1 - Richter, K. H. A1 - Böhning, Martin ED - Morgan, A. B. ED - Wilkie, C. A. ED - Nelson, G. L. T1 - Synergistic use of talc in halogen-free flame retarded polycarbonate/Acrylonitrile-butadiene-styrene blends T2 - Fire and polymers VI: New advances in flame retardant chemistry and science N2 - Pyrolysis, flammability, fire behavior, melt viscosity, and gas diffusion of bisphenol A polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) were investigated, with bisphenol A bis(diphenyl phosphate) (BDP), with 10 wt.% talc and with BDP in combination with 5, 10 and 20 wt.% talc, respectively. Compared to PC/ABS, PC/ABS + BDP results in an increased decomposition temperature of PC, a higher char yield, a significantly increased LOI, a V-0 classification in UL 94, a reduced peak heat release rate (pHRR), and a reduced total heat release (THR) in the cone calorimeter. This efficient flame retardancy is due to mechanisms in both the gas and condensed phases. PC/ABS + 10 wt.% talc shows a decrease in the PC decomposition temperature. The fire behavior is improved in part compared to PC/ABS, with an increased LOI and reduced pHRR. PC/ABS + BDP + 10 wt.% talc shows a strong synergism in LOI, a V-0 classification, and a decrease in pHRR, whereas THR is slightly increased compared to PC/ABS + BDP. Talc decreases the gas diffusion and enhances the flow limit for low shear rates, both of which influence the pyrolysis and flammability results. Further, talc improves the protection properties of the fire residues. Nevertheless it also partly suppresses flame inhibition and the charring effect of BDP. The synergism between BDP and talc in LOI is obtained even for low talc loadings in PC/ABS + BDP + talc, whereas for higher loadings saturation is observed. KW - Flame retardancy KW - PC/ABS KW - Aryl phosphate KW - Talc PY - 2012 SN - 978-0-8412-2780-4 DO - https://doi.org/10.1021/bk-2012-1118.ch002 N1 - Serientitel: ACS Symposium Series – Series title: ACS Symposium Series VL - 1118 IS - Chapter 2 SP - 15 EP - 36 PB - Oxford University Press AN - OPUS4-27563 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Shabir Mahr, Muhammad A1 - Hübert, Thomas A1 - Schartel, Bernhard A1 - Bahr, Horst A1 - Sabel, Martin A1 - Militz, H. T1 - Fire retardancy effects in single and double layered sol-gel derived TiO2 and SiO2-wood composites JF - Journal of sol gel science and technology N2 - Sol–gel derived TiO2 and SiO2-wood inorganic composites are prepared by direct vacuum infiltration of silicon and titanium alkoxide based precursors in pine sapwood in one or two cycles followed by a controlled thermal curing process. The resulting flame retardancy effect is investigated under two different fire scenarios using cone calorimetry and oxygen index (LOI). Heat release rates (HRR) especially the values for the second peak, are reduced moderately for all single layered composites. This effect is more pronounced for double layered composites where HRR was reduced up to 40 % showing flame retardancy potential in developing fires. Beside this, smoke release was lowered up to 72 % indicating that these systems had less fire hazards compared to untreated wood, whereas no meaningful improvement is realized in terms of fire load (total heat evolved) and initial HRR increase. However impressively, the LOI of the composites were increased up to 41 vol% in comparison to 23 vol% for untreated wood displaying a remarkable flame retardancy against reaction to a small flame. An approximate linear interdependence among the fire properties and the material loading as well as fire residue was observed. A residual protection layer mechanism is proposed improving the residue properties for the investigated composites. KW - Wood KW - Sol-gel KW - Composite materials KW - Cone calorimeter KW - Fire retardance KW - Flammability PY - 2012 DO - https://doi.org/10.1007/s10971-012-2877-5 SN - 0928-0707 SN - 1573-4846 VL - 64 IS - 2 SP - 452 EP - 464 PB - Kluwer Academic Publ. CY - Dordrecht AN - OPUS4-27618 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Gleim, Tobias A1 - Feldkamp, Martin A1 - Quercetti, Thomas A1 - Musolff, André A1 - Werner, Jan A1 - Wille, Frank T1 - Enhancement of Fire Test Stand Performance at Test Site of BAM: Installation and Evaluation of an Augmented System with a Fire Reference Package T2 - Wood & Fire Safety 2024 - Proceedings of the 10th International Conference on Wood & Fire Safety 2024 N2 - Packages for the transport of radioactive material are designed to en-dure severe accidents. Packages for the transportation of radioactive material must demonstrate that the package can withstand certain prescribed tests from the IAEA Regulations [1]. In addition to mechanical tests, a thermal test in form of a fire test must be carried out. As packages to be tested at BAM are signifi-cantly larger than previous package designs, BAM has expanded an existing fire test stand. A modular concept is chosen, which means that the arrangement of the burner nozzles can be adapted to the test specimen. The dimensions of the burner rings, the type, the orientation and the number of burner nozzles can be varied depending on the test specimen. In addition, various pumps can be used to set the corresponding mass flow. With the help of a calorimeter test, the fire test stand can be qualified for a specific size of packages regarding the boundary conditions of the IAEA Regulations [1]. Due to the typically wood filled impact limiters in German package designs, a fire test is necessary, as experiments have shown that possible openings that occurred during a mechanical test contributed to the igni-tion of the wood filled impact limiters within the prescribed 30 minutes of the IAEA Regulations [1]. From a series of experiments, two experiments are pre-sented to show the possibilities to obtain different temperatures and temperature rates in the test specimen. In addition to sensor data, the heat flux into the package is calculated to verify that the IAEA boundary conditions are satisfied. In addition to the temperature data, other data such as wind speed and wind direction are also recorded to explain subsequent effects in the measurement data in a comprehen-sible manner. T2 - Wood & Fire Safety 2024 CY - Strbske Pleso, Slowakei DA - 13.05.2024 KW - IAEA Regu-lations KW - Fire Test Stand KW - Accident Scenario KW - Fire Qualification PY - 2024 UR - https://link.springer.com/book/9783031591761 SN - 978-3-031-59176-1 SN - 978-3-031-59179-2 SN - 978-3-031-59177-8 VL - 1 SP - 1 EP - 8 PB - Springer Cham AN - OPUS4-60101 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dilz, K. A1 - Pohl, J. A1 - Rühe, S. A1 - Thomas, Hans-Martin A1 - Casperson, Ralf T1 - Online-Schweißnahterkennung von Schienenprüfzügen mittels Wirbelstromverfahren T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2003 N2 - Zur Detektion von Schweißnähten an verlegten Schienen gehört deren Identifikation und Lokalisation. Die Aufgabe, Schweißnähte derart zu detektieren, stellt sich bei der Prüfung eines Gleisnetzes auf Schädigungen, aber auch unabhängig davon. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2003 CY - Mainz, Deutschland DA - 26.05.2003 PY - 2003 UR - http://www.ndt.net/article/dgzfp03/papers/v07/v07.htm SN - 3-931381-47-1 N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 83-CD SP - 1 EP - 4 PB - DGZfP CY - Berlin AN - OPUS4-3491 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Casperson, Ralf A1 - Thomas, Hans-Martin A1 - Pohl, Rainer T1 - Wirbelstromprüfung an Eisenbahnschienen - Integration der Wirbelstromtechnik in Ultraschallprüfzüge T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2004 T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2004 CY - Salzburg, Österreich DA - 2004-05-17 KW - Wirbelstromprüfung an Eisenbahnschienen KW - Schienenprüfzug PY - 2004 UR - http://www.ndt.net/article/dgzfp04/papers/v72/v72.htm SN - 3-931381-55-2 SP - 1(?) EP - 5(?) PB - DGZfP CY - Berlin AN - OPUS4-5290 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Berührungslose Wirbelstromprüfung mit geregelter Sondenführung bei hoher Prüfgeschwindigkeit T2 - ZfP im Übergang zum 3. Jahrtausend (Berichtsband / Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. 73 N2 - Eine berührungslose Abtastung ist bei hoher Prüfgeschwindigkeit unabdingbar. Nur so kann ein Verschleiß der Wirbelstromsonde durch Abrieb verhindert werden. Gleichzeitig wird eine Beschädigung der zu prüfenden Oberfläche vermieden. Das Wirbelstromverfahren reagiert empfindlich auf Abstandsänderungen zwischen Wirbelstromsonde und Prüfoberfläche. Eine Trennung des Nutzsignals von dem stö-renden Abstandseffekt gelingt mit Hilfe der Phasenselektion in der Regel nur unzu-reichend. Dieses führt insbesondere bei unebenen Oberflächen zu einer Reduzie-rung der Prüfempfindlichkeit. Abhilfe schafft eine geregelte Sondenführung, bei der der Abstand konstant gehalten wird. Es wurden spezielle Sondenhalter nach zwei verschiedenen Verfahren der Ab-standsregelung entwickelt: Ein selbstregelndes System nach dem Luftkissenprinzip sowie ein elektrodynamischer Sondenhalter, angesteuert von einem elektronischen Regler. Erst durch den Einsatz der geregelten Sondenführung wurde die Detektion kleinster Inhomogenitäten (Ø = 100 µm) innerhalb von Mulden möglich. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2000 CY - Innsbruck, Österreich DA - 2000-05-29 KW - Wirbelstromprüfung KW - ZfP KW - Berührungslos KW - Abstandsregelung PY - 2000 UR - http://www.ndt.net/abstract/dgzfp00/data/30.htm SN - 3-931381-32-3 VL - 73-1 IS - 2 SP - 299 EP - 308 PB - DGZfP CY - Berlin AN - OPUS4-880 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Nachweis von Verunreinigungen in Supraleitern mit dem Wirbelstromverfahren T2 - 10 Jahre Vereinigung der ZfP in Deutschland (Berichtsband ... / Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. 68) N2 - Zusammenfassung Inhomogenitäten in supraleitenden Hohlraumresonatoren eines Linearbeschleunigers führen beim Betrieb zu einem lokalen Zusammenbruch der Supraleitung (Quench) und begrenzen dadurch die maximale Leistung des Beschleunigers. Es wurde ein Prüfsystem zur Qualitätsüberwachung der Niob-Bleche entwickelt, aus denen die Resonatoren gefertigt werden. Die Bleche werden mit dem Wirbelstromverfahren berührungslos abgetastet, wobei ein in der BAM entwickelter Sondenhalter nach dem Luftkissenprinzip verwendet wird. Mit dem Prüfsystem lassen sich Poren und Verun-reinigungen mit einer Ausdehnung ab ca. 80 µm sowohl an der Oberfläche als auch verdeckt nachweisen. T2 - Jahrestagung Zerstörungsfreie Materialprüfung 1999 CY - Celle, Deutschland DA - 1999-05-10 KW - Supraleiter PY - 1999 UR - http://www.ndt.net/article/v04n08/casperson/casperson.htm SN - 3-931381-27-7 VL - 2 IS - 68 SP - 735 EP - 742 PB - DGZfP CY - Berlin AN - OPUS4-795 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Pohl, Rainer A1 - Thomas, Hans-Martin T1 - Wirbelstrom-Prüfeinrichtung zur Qualitätskontrolle von Niob-Blechen T2 - ZfP in Anwendung, Entwicklung und Forschung - Jahrestagung 2001 T2 - Jahrestagung Zerstörungsfreie Materialprüfung 2001 CY - Berlin, Deutschland DA - 2001-05-21 PY - 2001 UR - http://www.ndt.net/article/dgzfp01/papers/p36/p36.htm N1 - Serientitel: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. – Series title: Berichtsband / Deutsche Gesellschaft für zerstörungsfreie Prüfung e. V. IS - 75-CD, CD-ROM PB - DGZfP CY - Berlin AN - OPUS4-1304 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Thomas, Hans-Martin A1 - Casperson, Ralf T1 - Optimierung von Wirbelstromsensoren für die Visualisierung von Materialschäden T2 - Vorträge des Querschnittseminars Bildhafte Darstellung und Auswertung der Ergebnisse Zerstörungsfreier Prüfungen T2 - Querschnittseminar Bildhafte Darstellung und Auswertung der Ergebnisse Zerstörungsfreier Prüfungen CY - Stutensee, Deutschland DA - 1995-11-27 KW - Wirbelstromprüfung KW - Sonde KW - Zerstörungsfreie Prüfung PY - 1995 SN - 3-931381-04-8 N1 - Serientitel: Berichtsband der Deutschen Gesellschaft für Zerstörungsfreie Prüfung – Series title: Berichtsband der Deutschen Gesellschaft für Zerstörungsfreie Prüfung IS - 50 SP - 83 EP - 91 PB - Deutsche Gesellschaft für Zerstörungsfreie Prüfung CY - Berlin AN - OPUS4-621 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Casperson, Ralf A1 - Thomas, Hans-Martin A1 - Pohl, Rainer A1 - Meierhofer, R. T1 - Wirbelstromprüfung beim Schienenschleifen T2 - ZfP in Forschung, Entwicklung und Anwendung - Jahrestagung 2007 T2 - DGZfP-Jahrestagung 2007 CY - Fürth, Deutschland DA - 2007-05-14 KW - Wirbelstrom KW - Eisenbahnschienen KW - Schienenschleifen PY - 2007 SN - 978-3-931381-98-1 SP - 1 EP - 8 (Vortrag 76) PB - DGZfP CY - Berlin AN - OPUS4-15855 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schilling, Markus A1 - Niebergall, Ute A1 - Marschall, Niklas A1 - Meinel, Dietmar A1 - Böhning, Martin T1 - Relation of craze to crack length during slow crack growth phenomena in high‐density polyethylene JF - Polymer Engineering & Science N2 - The craze‐crack mechanism occurring in high‐density polyethylene (HDPE) causing slow crack growth and environmental stress cracking is investigated in detail with respect to the relation of crack length and the related craze zone. This is essential for the understanding of the resulting features of the formed fracture surface and their interpretation in the context of the transition from crack propagation to ductile shear deformation. It turns out that an already formed craze zone does not inevitably result in formation of a propagating crack, but could also undergo ductile failure. For the examination, the full notch creep test (FNCT) was employed with a subsequent advanced fracture surface analysis that was performed using various imaging techniques: light microscopy, laser scanning microscopy, scanning electron microscopy, and X‐ray micro computed tomography scan. FNCT specimens were progressively damaged for increasing durations under standard test conditions applying Arkopal, the standard surfactant solution, and biodiesel as test media were used to analyze the stepwise growth of cracks and crazes. From considerations based on well‐established fracture mechanics approaches, a theoretical correlation between the length of the actual crack and the length of the preceding craze zone was established that could be evidenced and affirmed by FNCT fracture surface analysis. Moreover, the yield strength of a HDPE material exposed to a certain medium as detected by a classic tensile test was found to be the crucial value of true stress to induce the transition from crack propagation due to the craze‐crack mechanism to shear deformation during FNCT measurements. Highlights - Progress of crack formation in high‐density polyethylene is analyzed by different imaging techniques - Determined growth rates depend on distinction between craze zone and crack - The ratio of the present crack to the anteceding craze zone is validated theoretically - The transition from crack propagation to ductile shear deformation is identified - An already formed craze zone may still fail by ductile mechanisms KW - Craze-crack mechanism KW - Environmental stress cracking (ESC) KW - Full notch creep test (FNCT) KW - Laser scanning microscopy (LSM) KW - Slow crack growth (SCG) KW - X-ray computed tomography (CT) PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601831 DO - https://doi.org/10.1002/pen.26698 SN - 1548-2634 VL - 64 IS - 6 SP - 2387 EP - 2403 PB - Wiley AN - OPUS4-60183 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Schubert, Sven A1 - Komann, Steffen A1 - Neumann, Martin A1 - Reichardt, Adrian A1 - Müller, Lars A1 - Wille, Frank T1 - Ageing management measures of transport packages for radioactive materials T2 - Proceedings of Conference RAMTRANS 2024 N2 - The consideration of ageing mechanisms is with integration into the IAEA-requirements now obligatory for the design of transport packages. For packages intended to be used for shipment after storage the consideration of the effects of ageing mechanisms during storage in safety analyses and the implementation of corresponding instructions for operation and maintenance are required. Therefore, these packages have been maintained during storage in a manner that all requirements specified in the IAEA-requirements and in the applicable certificates of approval have been fulfilled. BAM is the competent authority in Germany for evaluating the thermal and mechanical design of packages for the transport of radioactive materials. In this context, BAM also evaluates the aging mechanisms and aging effects occurring during the long-term storage period of such transport packages. BAM has developed a guideline for the implementation of ageing assessment and of the measures for ageing management into the approval procedure based on IAEA-requirements. The goal of the presented paper is to introduce this guideline and the general approach for ageing management requirements and to describe the application to a specific package design. The type and amount of the ageing management not only depend on the use of the packaging, but also on the accessibility of the components that are considered in the ageing assessment. The different operating phases of a packaging are considered for the ageing assessment, such as loading, interim storage or transport. The implementation of measures for ageing management is divided into three levels – systemic measures, package design related measures and documentation. The systemic measures are attributed to the general management system and define the whole activities for organization of ageing management like structure, responsibilities, documentation, reports and evaluation. The package design related measures are defined in an ageing management plan. These measures shall ensure that the anticipated changes of the package design under consideration of ageing effects still complies with the design approval specification. Therefore, an ageing surveillance program and, if necessary, a gap analysis program shall be developed. The ageing management documentation ensures the continuous documentation of the compliance of a specific package to the approved package design, comprising mainly records resulting from operation and surveillance. T2 - RAMTRANS 2024 CY - London, United Kingdom DA - 15.05.2024 KW - Radioactive Materials KW - Ageing Management KW - Transport Packages KW - Dual Purpose Casks PY - 2024 VL - 2024 SP - 1 EP - 8 PB - Nuclear Institute CY - London AN - OPUS4-60186 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Langfeld, Kirsten A1 - Wilke, Antje A1 - Sut, Aleksandra A1 - Greiser, Sebastian A1 - Ulmer, B. A1 - Andrievici, V. A1 - Limbach, P. A1 - Bastian, Martin A1 - Schartel, Bernhard T1 - Halogen-free fire retardant styrene-ethylene-butylene-styrene-based thermoplastic elastomers using synergistic aluminium diethylphosphinate-based combinations JF - Journal of fire sciences N2 - Multicomponent flame retardant systems containing aluminum diethylphosphinate in thermoplastic styrene–ethylene–butylene–styrene elastomers are investigated (oxygen index, UL 94, cone calorimeter, and mechanical testing). Solid-state nuclear magnetic resonance, scanning electron microscopy, and elemental analysis illuminate the interactions in the condensed phase. Thermoplastic styrene–ethylene–butylene–styrene elastomers are a challenge for flame retardancy (peak heat release rate at 50 kW m-2 > 2000 kW m-2, oxygen index = 17.2 vol%, no UL-94 horizontal burn rating) since it burns without residue and with a very high effective heat of combustion. Adding aluminum diethylphosphinate results in efficient flame inhibition and improves the reaction to small flame, but it is less effective in the cone calorimeter. Its efficacy levels off for amounts >~25 wt%. As the most promising synergistic system, aluminum diethylphosphinate/melamine polyphosphate was identified, combining the main gas action of aluminum diethylphosphinate with condensed phase mechanisms. The protection layer was further improved with several adjuvants. Keeping the overall flame retardant content at 30 wt%, aluminum diethylphosphinate/melamine polyphosphate/titanium dioxide and aluminum diethylphosphinate/melamine polyphosphate/boehmite were the best approaches. An oxygen index of up to 27 vol% was achieved and a horizontal burn rating in UL 94 with immediate self-extinction; peak heat release rate decreased by up to 85% compared to thermoplastic styrene–ethylene–butylene–styrene elastomers, to <300 kW m-2. KW - Flame retardancy KW - Aluminium phosphinate KW - Thermoplastic elastomers KW - Cone calorimetry KW - Flammability PY - 2015 DO - https://doi.org/10.1177/0734904114565581 SN - 0734-9041 SN - 1530-8049 VL - 33 IS - 2 SP - 157 EP - 177 PB - Sage CY - London AN - OPUS4-32692 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Wilke, Antje A1 - Langfeld, Kirsten A1 - Ulmer, B. A1 - Andrievici, V. A1 - Hörold, Andreas A1 - Limbach, P. A1 - Bastian, Martin A1 - Schartel, Bernhard T1 - Halogen-free Multicomponent Flame Retardant Thermoplastic Styrene-Ethylene-Butylene-Styrene Elastomers Based on Ammonium Polyphosphate – Expandable Graphite Synergy JF - Industrial Engineering Chemistry Research N2 - Developing flame retarded thermoplastic elastomers (TPES) based on styrene−ethylene−butylene−styrene, polypropylene, and mineral oil is a challenging task because of their very high fire loads and flammability. A promising approach is the synergistic combination of expandable graphite (EG) and ammonium polyphosphate (APP). Cone calorimetry, oxygen index, and UL 94 classification were applied. The optimal EG:APP ratio is 3:1, due to the most effective fire residue morphology. Exchanging APP with melamine-coated APPm yielded crucial improvement in fire properties, whereas replacing EG/APP with melamine polyphosphate did not. Adjuvants, such as aluminum diethyl phosphinate (AlPi), zinc borate, melamine cyanurate, titanium dioxide, dipentaerylthritol, diphenyl-2-ethyl phosphate, boehmite, SiO2, chalk, and talcum, were tested. All flame retardants reinforced the TPE-S. The combination with AlPi is proposed, because with 30 wt % flame retardants a maximum averaged rate of heat emission below 200 kW m−2 and a V-0 rating was achieved. Multicomponent EG/APP/adjuvants systems are proposed as a suitable route to achieve efficient halogen-free flame retarded TPE-S. KW - Thermoplastic elastomers KW - Amonium polyphosphate KW - Expandable graphite KW - Synergy PY - 2017 DO - https://doi.org/10.1021/acs.iecr.7b01177 SN - 0888-5885 VL - 56 IS - 29 SP - 8251 EP - 8263 PB - ACS Publications AN - OPUS4-41509 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Gómez-Fernández, S. A1 - Günther, Martin A1 - Schartel, Bernhard A1 - Corcuera, M. A. A1 - Eceiza, A. T1 - Impact of the combined use of layered double hydroxides, lignin and phosphorous polyol on the fire behavior of flexible polyurethane foams JF - Industrial Crops & Products N2 - Flexible polyurethane foams with densities of 40 ± 2 kg m−3 were prepared by combining different ecofriendly fillers such as layered double hydroxides (LDH) and kraft lignin (a byproduct of the pulp and paper industry) with a phosphorous polyol (E560) in order to study their effect on the mechanical performance and fire behavior of the foams. Two series of foams were prepared, some containing lignin or LDH separately, and some with a combination of both: one of the series was prepared without E560 (0E foam series) and the other with 5 parts per hundred of E560 polyol (5E series). The use of fillers resulted in increased viscosity of the reactive mixture, requiring higher blowing agent content in order to hold the density of the foams constant. It was observed that urea phase segregation was favored in the series of 0E foams due to their lower viscosity than the 5E series. This had consequent effects on the resilience, compression force deflection and compression set of these foams. In terms of fire behavior it was observed that while the limiting oxygen index decreased, cone calorimeter results showed that the combination of lignin, LDH and E560 decreased the heat release of the foams. In addition, the combination of fillers and E560 contributed to increase the viscosity of the pyrolysis products, preventing the dripping of the molten polymer, which is a key factor in flame propagation towards adjacent objects in fire scenarios. KW - Ligning KW - Foam KW - Flexible polyurethane foam KW - Flame retardant PY - 2018 SN - 0926-6690 VL - 125 SP - 346 EP - 359 PB - Elsevier B.V. AN - OPUS4-45971 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Poka, Konstantin A1 - Ali, Sozol A1 - Saeed, Waleed A1 - Merz, Benjamin A1 - Epperlein, Martin A1 - Hilgenberg, Kai T1 - Design and implementation of a machine log for PBF-LB/M on basis of IoT communication architectures and an ETL pipeline JF - Progress in Additive Manufacturing N2 - AbstractPowder Bed Fusion with Laser Beam of Metals (PBF-LB/M) has gained more industrial relevance and already demonstrated applications at a small series scale. However, its widespread adoption in various use cases faces challenges due to the absence of interfaces to established Manufacturing Execution Systems (MES) that support customers in the predominantly data-driven quality assurance. Current state-of-the-art PBF-LB/M machines utilize communication architectures, such as OPC Unified Architecture (OPC UA), Message Queuing Telemetry Transport (MQTT) and Representational State Transfer Application Programming Interface (REST API). In the context of the Reference Architecture Model Industry 4.0 (RAMI 4.0) and the Internet of Things (IoT), the assets, particularly the physical PBF-LB/M machines, already have an integration layer implemented to communicate data such as process states or sensor values. Missing is an MES component acting as a communication and information layer. To address this gap, the proposed Extract Transform Load (ETL) pipeline aims to extract relevant data from the fabrication of each build cycle down to the level of scan vectors and additionally to register process signals. The suggested data schema for archiving each build cycle adheres to all terms defined by ISO/TC 261—Additive Manufacturing (AM). In relation to the measurement frequency, all data are reorganized into entities, such as the AM machine, build cycle, part, layer, and scan vector. These scan vectors are stored in a runtime-independent format, including all metadata, to be valid and traceable. The resulting machine log represents a comprehensive documentation of each build cycle, enabling data-driven quality assurance at process level. KW - FAIR data KW - Data-driven quality assurance KW - Laser powder bed fusion PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-601256 DO - https://doi.org/10.1007/s40964-024-00660-7 SN - 2363-9512 SP - 1 EP - 12 PB - Springer Science and Business Media LLC AN - OPUS4-60125 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - BOOK A1 - Schubert, Martina A1 - Schartel, Bernhard A1 - Lang, M. A1 - Yin, Huajie A1 - Dittrich, Bettina A1 - Heidemeyer, P. A1 - Bastian, Martin T1 - Wirkungsweise von halogenfreien Flammschutzmitteln in WPC N2 - Das Ziel des Forschungsvorhabens war die Untersuchung der Wirkungsweise von halogenfreien Flammschutzmitteln in WPC. Eine große Anzahl verschiedener Flammschutzmittel wurde hinsichtlich ihrer Wirkmechanismen umfassend untersucht, um ein Verständnis für die ablaufenden Prozesse zu entwickeln. Hierbei wurden verschiedene Brandtests eingesetzt, um die Materialien bezüglich verschiedener Applikationen (E&E, Transportwesen, Bauwesen) zu beleuchten. Die verschiedenen Untersuchungen liefern aber auch ein umfassendes Bild vom Brandverhalten in den verschiedenen Eigenschaften, wie Entflammbarkeit und Brandausbreitung. Die prinzipiellen Ansätze wurden anhand von verschiedenen Flammschutzmitteln beleuchtet, ihre Pyrolyse und ihre Performance in verschiedenen Brandtests gegenübergestellt. Bei der angestrebten geringen Zusatzmenge ist durch den Zusatz eines einzigen Flammschutzmittels keine zufriedenstellende Reduktion der Brandeigenschaften zu erwarten. Multikomponentensysteme zur Steigerung der Effizienz sind angezeigt. Einige prinzipielle Kombinationsmöglichkeiten wurden für alle Hauptflammschutzmittel durchgespielt. Die teilweise deutlichen Verbesserungen zeigen Wege zur erfolgreichen Produktentwicklung auf. So konnten bei den Spritzgießcompounds Eigenschaften erzielt werden, die eine UL 94 V0 Klassifizierung ermöglichen. Ein Einsatz der im Forschungsvorhaben hergestellten Compounds als Baustoff ist aufgrund des Brandverhaltens in den baustoffspezifischen Prüfungen nicht möglich. Hier sind weitere Flammschutz-Konzepte zu erproben. Gleitmittel nehmen bei den untersuchten Extrusionscompounds keinen Einfluss auf das Brandverhalten. Haftvermittler nehmen ebenfalls keinen signifikanten Einfluss auf das untersuchte Brandverhalten, können aber zu einer veränderten Verteilung der Füllstoffe und damit zur Ausbildung einer effektiveren Schutzschicht führen. Feinere Holzpartikel schneiden bei den Brandprüfungen besser ab als grobe Holzpartikel. Bei Einsatz von grobem Holz wird eine schlechtere Rückstandsstruktur ausgebildet, was das Brandverhalten negativ beeinflusst. Der Einsatz von vorbehandeltem Holz brachte nicht die erwartete Verbesserung. Die neu konzipierte Aufbereitungsanlage auf Basis des Planetwalzenextruders konnte erfolgreich in Betrieb genommen werden. Vergleichende Versuche mit dem Doppelschneckenextruder zeigten, dass der PWE-Aufbau eine gute Alternative zur etablierten DSE-Aufbereitung darstellt. Zusätzlich wurden an Compounds vielversprechender Flammschutzansätze weitere Materialprüfungen (Biegeversuch, Schlagversuch, Wasseraufnahme) durchgeführt, um den Einfluss der FSM auf die spezifischen Eigenschaften der WPC zu beleuchten. N2 - The objective of the research project was to investigate the effect of halogen-free flame retardants in WPC. A large number of different flame retardants was thoroughly examined regarding their effect mechanisms to develop an understanding for the processes taking place. Different fire tests were used to examine the materials with respect to the different applications (E&E, transportation, construction). Additionally, the different investigations provide a comprehensive picture of the fire behavior regarding the different properties, such as flammability and fire spread. The fundamental approaches were examined by means of different flame retardants and their pyrolysis and performance were compared in different fire tests. A satisfactory reduction of the fire properties by adding only one flame retardant cannot be expected with the intended low added amount. Multi-component systems to increase the efficiency are indicated. Some basic combination options were tried out for all main flame retardants. The partially considerable improvements illustrate ways for successful product development. This way, properties could be achieved in injection molding compounds, which allow for a UL 94 V0 classification. It is not possible to use the compounds introduced in the research project as building material due to the fire behavior in the building material specific tests. Further flame protection concepts need to be tested in this area. Slip agents do not have an influence on the fire behavior of the examined extrusion compounds. Adhesion promoters also do not have a significant influence on the examined fire behavior but can lead to a change in the distribution of the fillers and thus to the formation of a more effective protective layer. Finer wood particles performed better in the fire tests than coarse wood particles. When using coarse wood, an inferior residual structure is formed, which has an adverse effect on the fire behavior. The use of pretreated wood fibers did not bring the expected improvement. The newly conceived processing technique based on a planetary roller extruder (PRE) was successfully put into operation. Comparative tests with twin-screw extruders (TSE) showed that the PRE configuration is a good alternative to the established TSE processing. Additionally, further material testing (bending test, impact test, water absorption) was performed on promising flame retarded compounds to examine the influence of the fire retardants on the specific properties of the WPC. KW - Wood plastic composite KW - Halogen free KW - Flame retardancy PY - 2016 SN - 978-3-8440-4645-8 SN - 2364-754X SP - 1 EP - 88 PB - Shaker Verlag CY - Aachen AN - OPUS4-37482 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CHAP A1 - Böhning, Martin A1 - Frasca, Daniele A1 - Schulze, Dietmar A1 - Schartel, Bernhard ED - Yaragalla, S. ED - Kumar Mishra, R. ED - Thomas, S. ED - Kalarikkal, N. ED - Maria, H. J. T1 - Multilayer Graphene/Elastomer Nanocomposites T2 - Carbon-based Nanofillers and their Rubber Nanocomposites N2 - Elastomers are usually reinforced by large amount of fillers like carbon black (CB) or silica in order to improve various mechanical properties, such as Young’s modulus, hardness, tear resistance, abrasion resistance, and gas barrier properties. In recent years, such improvements were also obtained by using nanoparticles at significantly lower filler loadings. Graphene is a twodimensional (2D) sheet of a thickness in the atomic scale, composed of a honeycomb structure of sp2 carbon atoms. Besides significant mechanical reinforcement, graphene harbors the potential to be used as a multifunctional filler, as it can also increase the conductivity and weathering stability of elastomer matrices. Ultraviolet (UV) irradiation and oxidative agents can lead to the degradation of elastomers due to a multistep photooxidative process, including the formation of radicals. Carbon-based fillers have an influence on these reactions, as they can absorb UV radiation and act as radical scavengers. This chapter summarizes the results of our larger project on multilayer graphene (MLG)/elastomer nanocomposites, previously published, which present a comprehensive case study of MLG as a multifunctional nanofiller in elastomer/graphene nanocomposites. Different elastomeric matrices are compared in order to demonstrate the outstanding impact of MLG as a general benefit. The dependency of this effect on concentration is discussed in detail. Taking into account the key role of dispersion, different mixing procedures are compared, evaluating a facile implementation of graphene nanocomposites into conventional rubber processing. Finally, the most probable commercial uses of MLG nanofillers in combination with conventional CB are studied. The nanocomposites were prepared in the kg scale in order to obtain enough specimens to investigate various properties of the uncured and vulcanized rubbers at the highest quality level, including rheology, curing, morphology, several mechanical properties, abrasion, conductivity, gas permeation, burning behavior, and weathering stability. The structure property relationships are asserted and questioned, for example, by investigating the radical scavenging ability or aspect ratio of the MLG. This chapter illustrates the state of the art of graphene/rubber nanocomposites targeted for commercial mass applications. KW - Nanocomposite KW - Graphene KW - Rubber KW - Reinforcement KW - Durability KW - Masterbatch KW - Gas Barrier Properties KW - Conductivity PY - 2019 SN - 978-0-12-817342-8 SP - 139 EP - 200 PB - Elsevier AN - OPUS4-47408 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Frasca, Daniele A1 - Schulze, Dietmar A1 - Böhning, Martin A1 - Krafft, Bernd A1 - Schartel, Bernhard T1 - Chlorbutylkautschuk/Multilayergraphen-Nanocomposites JF - GAK Gummi Fasern Kunststoffe N2 - In den letzten Jahren werden zunehmend Nanopartikel als Füllstoff für Polymere vorgeschlagen und auch erfolgreich in Elastomer-Nanocomposites eingesetzt. In dieser Arbeit wird Multilayergraphen (MLG) als Nanofüllstoff näher untersucht, der sich bereits bei geringen Konzentrationen als effizient erweist. MLG besteht aus nur etwa zehn Graphenlagen. Chlorbutylkautschuk (CIIR)/MLG-Nanocomposites mit verschiedenen MLG-Gehalten wurden mit Hilfe eines ultraschallunterstützen Mischverfahrens in Lösung hergestellt und auf einem Walzwerk weiterverarbeitet. Das Einmischen von MLG führt zu einer deutlichen Verbesserung der rheologischen und mechanischen Eigenschaften, des Vernetzungsverhaltens sowie der Barrierewirkung gegenüber Gasen. Bereits der Zusatz von 3 phr MLG zu CIIR führt zu einem mehr als zweifach höheren E-Modul und zu einer Reduktion der Permeabilität von O2 und CO2 um 30 %. Höhere Konzentrationen an Nanofüllstoff resultieren in einer weiteren Verbesserung der Eigenschaften der Nanocomposites. Weiterhin zeigten die CIIR/MLG-Nanocomposites auch eine geringere Entflammbarkeit. KW - Elastomere KW - Nanokomposite KW - Graphen KW - Chlorbutylkautschuk PY - 2017 SN - 0176-1625 VL - 70 IS - 5 SP - 311 EP - 322 PB - Dr. Gupta Verlag CY - Ratingen AN - OPUS4-40327 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Markwart, Jens C. A1 - Battig, Alexander A1 - Zimmermann, Lisa A1 - Wagner, Martin A1 - Fischer, Jochen A1 - Schartel, Bernhard A1 - Wurm, Frederik R. T1 - Systematically controlled decomposition mechanism in phosphorus flame retardants by precise molecular architecture: P−O vs P−N JF - ACS Applied Polymer Materials N2 - Flame retardants (FR) are inevitable additives to many plastics. Halogenated organics are effective FRs but are controversially discussed due to the release of toxic gases during a fire or their persistence if landfilled. Phosphorus-containing compounds are effective alternatives to halogenated FRs and have potential lower toxicity and degradability. In addition, nitrogencontaining additives were reported to induce synergistic effects with phosphorus-based FRs. However, no systematic study of the gradual variation on a single phosphorus FR containing both P−O and P−N moieties and their comparison to the respective blends of phosphates and phosphoramides was reported. This study developed general design principles for P−O- and P−N-based FRs and will help to design effective FRs for various polymers. We synthesized a library of phosphorus FRs that only differ in their P-binding pattern from each other and studied their decomposition mechanism in epoxy resins. Systematic control over the decomposition pathways of phosphate (PO(OR)3), phosphoramidate (PO(OR)2(NHR)), phosphorodiamidate (PO(OR)(NHR)2), phosphoramide (PO(NHR)3), and their blends was identified, for example, by reducing cis-elimination and the formation of P−N-rich char with increasing nitrogen content in the P-binding sphere. Our FR epoxy resins can compete with commercial FRs in most cases, but we proved that the blending of esters and amides outperformed the single molecule amidates/diamidates due to distinctively different decomposition mechanisms acting synergistically when blended. KW - Phosphorus KW - Flame retardants KW - Epoxies KW - Mechanistic study KW - Toxicity PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-481549 DO - https://doi.org/10.1021/acsapm.9b00129 SN - 2637-6105 VL - 1 IS - 5 SP - 1118 EP - 1128 PB - ACS AN - OPUS4-48154 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strommer, Bettina A1 - Schulze, Dietmar A1 - Schartel, Bernhard A1 - Böhning, Martin T1 - Networking Skills: The Effect of Graphene on the Crosslinking of Natural Rubber Nanocomposites with Sulfur and Peroxide Systems JF - Polymers N2 - Tailored crosslinking in elastomers is crucial for their technical applications. The incorporation of nanoparticles with high surface-to-volume ratios not only leads to the formation of physical networks and influences the ultimate performance of nanocomposites, but it also affects the chemical crosslinking reactions. The influence of few-layer graphene (FLG) on the crosslinking behavior of natural rubber is investigated. Four different curing systems, two sulfur-based with different accelerator-to-sulfur ratios, and two peroxide-based with different peroxide concentrations, are combined with different FLG contents. Using differential scanning calorimetry (DSC), vulcametry (MDR) and swelling measurements, the results show an accelerating effect of FLG on the kinetics of the sulfur-based curing systems, with an exothermic reaction peak in DSC shifted to lower temperatures and lower scorch and curing times in the MDR. While a higher accelerator-to-sulfur ratio in combination with FLG leads to reduced crosslinking densities, the peroxide crosslinkers are hardly affected by the presence of FLG. The good agreement of crosslink densities obtained from the swelling behavior confirms the suitability of vulcameter measurements for monitoring the complex vulcanization process of such nanocomposite systems in a simple and efficient way. The reinforcing effect of FLG shows the highest relative improvements in weakly crosslinked nanocomposites. KW - Nanocomposite KW - Elastomers KW - Graphene KW - Crosslinking KW - Network KW - Rubber KW - Vulcanization PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-560409 DO - https://doi.org/10.3390/polym14204363 VL - 14 IS - 20 PB - MDPI AN - OPUS4-56040 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Casperson, Ralf A1 - Engert, D. A1 - Heilmann, S. A1 - Herold, F. A1 - Hofmann, D. A1 - Küchler, H. A1 - Leinenbach, F. A1 - Lorenz, S. A1 - Martin, J. A1 - Rehbein, J. A1 - Sprau, B. A1 - Suppes, A. A1 - Vrana, J. A1 - Wild, E. T1 - DICONDE in der ZfP N2 - DICONDE (Digital Imaging and Communication in Non-Destructive Evaluation) ist ein offener internationaler Standard zur Speicherung und zum Austausch industrieller Prüfdaten und prozessbezogener Informationen. Der DICONDE-Standard definiert sowohl die Semantik für eine strukturierte Speicherung von Daten als auch die netzwerkbasierte Kommunikation zwischen zwei Endpunkten. Damit lassen sich viele Vorgänge von Prüfprozessen digital und sicher abbilden und gleichzeitig normative Anforderungen wie eine Rückführbarkeit zum Prüfer und Prüfobjekt sowie eine Reproduzierbarkeit von Prüfergebnissen erfüllen. KW - DICONDE KW - ZfP KW - Interoperabilität KW - Datenspeicherung KW - Kommunikation PY - 2023 SP - 1 EP - 13 PB - DGZfP CY - Berlin AN - OPUS4-58578 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Brierley, N. A1 - Casperson, Ralf A1 - Engert, D. A1 - Heilmann, S. A1 - Herold, F. A1 - Hofmann, D. A1 - Küchler, H. A1 - Leinenbach, F. A1 - Lorenz, S. A1 - Martin, J. A1 - Rehbein, J. A1 - Sprau, B. A1 - Suppes, A. A1 - Vrana, J. A1 - Wild, E. T1 - DICONDE in industrial inspection N2 - DICONDE (Digital Imaging and Communication in Non-Destructive Testing) is an open international standard for storing and exchanging industrial test data and process-related information. The DICONDE standard defines both the semantics for structured storage of data and the network-based communication between two endpoints. This allows many test processes to be mapped digitally and securely, while at the same time meeting normative requirements such as traceability to the tester and test object and reproducibility of test results. KW - DICONDE KW - NDT KW - Interoperability KW - Data storage KW - Communication PY - 2023 SP - 1 EP - 13 PB - DGZfP CY - Berlin AN - OPUS4-58576 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Paul, Martin A1 - Weller, Michael G. T1 - Antibody Screening by Microarray Technology - Direct Identification of Selective High-Affinity Clones JF - Antibodies N2 - The primary screening of hybridoma cells is a time-critical and laborious step during the development of monoclonal antibodies. Often, critical errors occur in this phase, which supports the notion that the generation of monoclonal antibodies with hybridoma technology is difficult to control and hence, a risky venture. We think that it is crucial to improve the screening process to eliminate most of the critical deficits of the conventional approach. With this new microarray-based procedure, several advances could be achieved: Selectivity for excellent binders, high-throughput, reproducible signals, avoidance of misleading avidity (multivalency) effects, and performance of simultaneous competition experiments. The latter can also be used to select clones of desired cross-reactivity properties. In this paper, a model system with two excellent clones against carbamazepine, two weak clones, and blank supernatant containing fetal bovine serum was designed to examine the effectiveness of the new system. The excellent clones could be detected largely independent of the immunoglobulin G (IgG) concentration, which is usually unknown during the clone screening since the determination and subsequent adjustment of the antibody concentration are not feasible in most cases. Furthermore, in this approach, the enrichment, isolation, and purification of IgG for characterization is not necessary. Raw cell culture supernatant can be used directly, even when fetal calf serum (FCS) or other complex media is used. In addition, an improved method for the oriented antibody-immobilization on epoxy-silanized slides is presented. Based on the results of this model system with simulated hybridoma supernatants, we conclude that this approach should be preferable to most other protocols leading to many false positives, causing expensive and lengthy elimination steps to weed out the poor clones. KW - ELISA KW - Immunoassay KW - Microarray KW - Lab-on-a-chip KW - Miniaturization KW - Aautomatisation KW - HTS KW - High-throughput KW - Screening KW - Fluorescence KW - Label KW - Hybridoma KW - Inhibition PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-503361 DO - https://doi.org/10.3390/antib9010001 SN - 2073-4468 VL - 9 IS - 1 SP - 1 EP - 16 PB - MDPI CY - Basel AN - OPUS4-50336 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Paul, Martin A1 - Tscheuschner, Georg A1 - Herrmann, Stefan A1 - Weller, Michael G. T1 - Fast Detection of 2,4,6-Trinitrotoluene (TNT) at ppt Level by a Laser-Induced Immunofluorometric Biosensor JF - Biosensors N2 - The illegal use of explosives by terrorists and other criminals is an increasing issue in public spaces, such as airports, railway stations, highways, sports venues, theaters, and other large buildings. Security in these environments can be achieved by different means, including the installation of scanners and other analytical devices to detect ultra-small traces of explosives in a very short time-frame to be able to take action as early as possible to prevent the detonation of such devices. Unfortunately, an ideal explosive detection system still does not exist, which means that a compromise is needed in practice. Most detection devices lack the extreme analytical sensitivity, which is nevertheless necessary due to the low vapor pressure of nearly all explosives. In addition, the rate of false positives needs to be virtually zero, which is also very difficult to achieve. Here we present an immunosensor system based on kinetic competition, which is known to be very fast and may even overcome affinity limitation, which impairs the performance of many traditional competitive assays. This immunosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. In the case of the explosive 2,4,6-trinitrotoluene (TNT), some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and chip-based mixing-devices and flow-cells. The system achieved limits of detection of 1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 min. A cross-reactivity test with 5000 pM solutions showed no signal by pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX). This immunosensor belongs to the most sensitive and fastest detectors for TNT with no significant cross-reactivity by non-related compounds. The consumption of the labeled antibody is surprisingly low: 1 mg of the reagent would be sufficient for more than one year of continuous biosensor operation. KW - Airport KW - Aviation KW - Bombs KW - Terrorism KW - Biosensing KW - Continuous Sensor KW - High-Speed KW - Ultrasensitive PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-511245 DO - https://doi.org/10.3390/bios10080089 VL - 10 IS - 8 SP - 89 PB - MDPI CY - Basel AN - OPUS4-51124 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paul, Martin A1 - Weller, Michael G. T1 - Antibody Screening by Microarray Technology – Direct Identification of Selective High-Affinity Clones T2 - Preprints N2 - The primary screening of hybridoma cells is a time-critical and laborious step during the development of monoclonal antibodies. Often critical errors occur in this phase, which supports the notion that the generation of monoclonal antibodies with hybridoma technology is difficult to control and hence a risky venture. We think that it is crucial to improve the screening process to eliminate most of the immanent deficits of the conventional approach. With this new microarray-based procedure, several advances could be achieved: Selectivity for excellent binders, high throughput, reproducible signals, avoidance of misleading avidity (multivalency) effects, and simultaneous performance of competition experiments. The latter can directly be used to select clones of desired cross-reactivity properties. In this paper, a model system with two excellent clones against carbamazepine, two weak clones and blank supernatant has been designed to examine the effectiveness of the new system. The excellent clones could be detected largely independent of the IgG concentration, which is unknown during the clone screening since the determination and subsequent adjustment of the antibody concentration is not possible in most cases. Furthermore, in this approach, the enrichment, isolation, and purification of IgG for characterization is not necessary. Raw cell culture supernatant can be used directly, even when fetal calf serum (FCS) or other complex media had been used. In addition, an improved method for the oriented antibody-immobilization on epoxy-silanized slides is presented. Based on the results of this model system, we conclude that this approach should be preferable to most other protocols leading to many of false positives, causing expensive and lengthy confirmation steps to weed out the poor clones. KW - Hybridoma KW - Monoclonal Antibodies KW - Clones KW - Competitive Immunoassay KW - Hapten Immunoassay KW - False Positives PY - 2019 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-506621 DO - https://doi.org/10.20944/preprints201911.0023.v1 SN - 2310-287X SP - 1 EP - 17 PB - MDPI CY - Basel AN - OPUS4-50662 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paul, Martin T1 - Microarrays for the screening of monoclonal antibodies from supernatants T2 - Masterarbeit N2 - In this thesis a protocol based on a direct competitive and non-competitive immunoassay using the microarray format was developed to screen emulated hybridoma supernatants against the drug carbamazepine (CBZ). As support, epoxy slides were manufactured by coating microscope glass slides with epoxy silanes. The manufactured epoxy slides showed similar capacity for protein immobilization as commercially available NEXTERION slides, but showed a higher autofluorescence background. On the epoxy slides, protein A, Cys-A, G and Cys-G were immobilized as antibody capturing coating. It could be shown that the Cys-tag considerably increased the immobilization of all compared proteins, especially of protein G. Protein Cys-G immobilized at pH 8-9 was considered the most suitable protein for antibody immobilization due to good spot uniformity and a high binding capacity for IgG. Additionally, in immobilization experiments it could be shown, that 10-500 fold excess of bovine IgG, introduced by two different fetal bovine serum (FBS) products, showed no significant competition on the immobilization of mice or goat IgG on protein Cys-G. To examine the captured antibodies for affinity to CBZ, the CBZ-TOTA-DY654 tracer was custom synthesized. It could be demonstrated, that the tracer antibody interaction was competitive with the tracer precursor, CBZ-TOTA-NH2 and CBZ. Furthermore, the synthesized tracer was also successfully used by externals to evaluate CBZ affine hybriodoma cells in flow cytometry. In the simulated screening, five antibodies with known affinity to CBZ were diluted in a cell culture medium. The screening method allowed to differentiate between affine antibodies (IC50 < 20 µg/ml) and unaffine antibodies (IC50 > 20 µg/ml), when concentrations of 0.1 µg/ml IgG or greater have been used. Of five applied antibodies, all highly affine clones (CE2 and B3212M) were reported as positives while no false-positive samples were observed. The screening included competitive, with around 89500 fold excess of CBZ, and non-competitive tracer incubation on different segments of the same chip, which resulted in total signal suppression on the competitive segment. The screening was performed in 20 hours, only a few nanoliters, of each simulated supernatant, were consumed in the screening process, furthermore in the method standard 96 well MTPs were used and no cleanroom facilities were required. KW - Carbamazepine KW - Microscopic slides KW - Protein A cys KW - Competition KW - Epoxy silanes KW - Supernatant KW - Antibody immobilization PY - 2017 SP - 1 EP - 96 PB - Humboldt-Universität zu Berlin CY - Berlin AN - OPUS4-54645 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Martin A1 - Schleeh, Clemens A1 - Weller, Michael G. T1 - High sensitivity online detection of Trinitrotoluene (TNT) N2 - The antibody A.1.1.1 was labeled and found to be very sensitive and highly selective for TNT. A novel monolithic affinity column was coated with a Trinitroaniline (TNA)-BSA affinity conjugate and a custom laser induced fluorescence detector were built to allow for continuous and sensitive detection. The affinity column combined with the high sensitivity detector resulted in a limit of detection of approx. 100 pM TNT or 20 ppt TNT for offline detection and was able to detect picogram amounts within three minutes. T2 - SALSA Make and Measure 2020 CY - Online meeting DA - 15.10.2020 KW - Biosensor KW - Explosive KW - Antibody KW - Online KW - Fluorescence PY - 2020 AN - OPUS4-51529 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Martin A1 - Weller, Michael G. T1 - Fast Detection of TNT at ppt Level by an Immunofluorometric Biosensor N2 - The mechanism of this system is based on kinetic competition. This biosensor consists of a monolithic glass column with a vast excess of immobilized hapten, which traps the fluorescently labeled antibody as long as no explosive is present. If the explosive 2,4,6-trinitrotoluene (TNT) is introduced some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein. The fluorescence is detected by highly sensitive laser-induced fluorescence with a conventional CMOS camera. The system achieved limits of detection of approx.1 pM (1 ppt) of the fluorescent label and around 100 pM (20 ppt) of TNT. The total assay time is less than 8 minutes. A cross-reactivity test with 5000 pM solutions of pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) showed no cross reactivity. T2 - Doktorandenseminar 2020 des Arbeitskreis-Prozessanalytik CY - Online meeting DA - 21.09.2020 KW - TNT KW - Explosive KW - Antibody KW - Fluorescence KW - Biosensor KW - Affinity PY - 2020 AN - OPUS4-51314 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Martin A1 - Weller, Michael G. T1 - Development of a biosensor for the online detection of explosives N2 - An affinity column, which removed up to 99 % of high affinity Anti-TNT antibody at high antibody concentrations, was manufactured based on a monolithic glass core and a trinitroaniline-BSA conjugate. To detect the label Dy654 in the nM range an epi-fluorescence microscope setup with a CMOS camera was established to serve as online fluorescence detector with multiplexing capabilities. T2 - ANAKON 2019 CY - Münster, Germany DA - 25.03.2019 KW - Online fluorescence KW - Trinitro KW - Affinty KW - Antibody PY - 2019 AN - OPUS4-47745 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steglich, P. A1 - Bondarenko, S. A1 - Mai, C. A1 - Paul, Martin A1 - Weller, Michael G. A1 - Mai, A. T1 - CMOS-Compatible Silicon Photonic Sensor for Refractive Index Sensing Using Local Back-Side Release JF - IEEE Photonics Technology Letters N2 - Silicon photonic sensors are promising candidates for lab-on-a-chip solutions with versatile applications and scalable production prospects using complementary metal-oxide semiconductor (CMOS) fabrication methods. However, the widespread use has been hindered because the sensing area adjoins optical and electrical components making packaging and sensor handling challenging. In this work, a local back-side release of the photonic sensor is employed, enabling a separation of the sensing area from the rest of the chip. This approach allows preserving the compatibility of photonic integrated circuits in the front-end of line and metal interconnects in the back-end of line. The sensor is based on a micro-ring resonator and is fabricated on wafer-level using a CMOS technology. We revealed a ring resonator sensitivity for homogeneous sensing of 106 nm/RIU. KW - Photonic biosensor KW - Lab-on-a-chip KW - Ring resonator KW - Resonance wavelength shift KW - PIC technology KW - Back-side integration PY - 2020 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-517139 DO - https://doi.org/10.1109/LPT.2020.3019114 VL - 32 IS - 19 SP - 1241 EP - 1244 PB - IEEE AN - OPUS4-51713 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steglich, Patrick A1 - Paul, Martin A1 - Mai, C. A1 - Böhme, A. A1 - Bondarenko, S. A1 - Weller, Michael G. A1 - Mai, A. T1 - A monolithically integrated microfluidic channel in a silicon-based photonic-integrated-circuit technology for biochemical sensing JF - Proceedings of SPIE N2 - In this work, a cost-effective optofluidic system is proposed and preliminary experimental results are presented. A microfluidic channel monolithically integrated into a photonic integrated circuit technology is used in conjunction with a cyclic olefin copolymer (COC) substrate to provide fluidic in- and output ports. We report on initial experimental results as well as on the simple and cost-effective fabrication of this optofluidic system by means of micro-milling. KW - Biosensors KW - Biophotonics KW - Optical sensors KW - Photonic sensors KW - Ring resonators KW - Silicon photonics KW - Lab-on-a-chip KW - Microfluidics KW - Chip KW - Biochip PY - 2021 DO - https://doi.org/10.1117/12.2588791 VL - 11772 SP - 1 EP - 5 PB - SPIE AN - OPUS4-53559 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Steglich, P. A1 - Rabus, D. G. A1 - Sada, C. A1 - Paul, Martin A1 - Weller, Michael G. A1 - Mai, C. A1 - Mai, A. T1 - Silicon Photonic Micro-Ring Resonators for Chemical and Biological Sensing: A Tutorial JF - IEEE Sensors Journal N2 - Silicon photonic micro-ring resonators (MRR) developed on the silicon-on-insulator (SOI) platform, owing to their high sensitivity and small footprint, show great potential for many chemical and biological sensing applications such as label-free detection in environmental monitoring, biomedical engineering, and food analysis. In this tutorial,we provide the theoretical background and give design guidelines for SOI-based MRR as well as examples of surface functionalization procedures for label-free detection of molecules. After introducing the advantages and perspectives of MRR, fundamentals of MRR are described in detail, followed by an introduction to the fabrication methods, which are based on a complementary metal-oxide semiconductor (CMOS) technology. Optimization of MRR for chemical and biological sensing is provided, with special emphasis on the optimization of waveguide geometry. At this point, the difference between chemical bulk sensing and label-free surface sensing is explained, and definitions like waveguide sensitivity, ring sensitivity, overall sensitivity as well as the limit of detection (LoD) of MRR are introduced. Further, we show and explain chemical bulk sensing of sodium chloride (NaCl) in water and provide a recipe for label-free surface sensing. KW - Biosensors KW - Biophotonics KW - Chemosensor KW - Biosensor KW - Microresonator KW - Nanophotonics KW - Optical sensors KW - Photonic sensors KW - Optoelectronic KW - Ring resonator KW - Silicon photonics KW - Miniaturization KW - Lab-on-a-chip KW - Lab-on-chip KW - Waveguide KW - Surface chemistry KW - Silanization KW - Glutaraldehyde KW - Affinity immobilization KW - Antibody KW - Oriented immobilization KW - Real-time measurement PY - 2022 DO - https://doi.org/10.1109/JSEN.2021.3119547 SN - 1530-437X VL - 22 IS - 11 SP - 10089 EP - 10105 PB - IEEE AN - OPUS4-55147 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Paul, Martin A1 - Tannenberg, Robert A1 - Tscheuschner, Georg A1 - Ponader, Marco A1 - Weller, Michael G. T1 - Cocaine Detection by a Laser-Induced Immunofluorometric Biosensor JF - Biosensors N2 - The trafficking of illegal drugs by criminal networks at borders, harbors, or airports is an increasing issue for public health as these routes ensure the main supply of illegal drugs. The prevention of drug smuggling, including the installation of scanners and other analytical devices to detect small traces of drugs within a reasonable time frame, remains a challenge. The presented immunosensor is based on a monolithic affinity column with a large excess of immobilized hapten, which traps fluorescently labeled antibodies as long as the analyte cocaine is absent. In the presence of the drug, some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and microfluidic chip-based mixing devices and flow cells. The biosensor achieved limits of detection of 7 ppt (23 pM) of cocaine with a response time of 90 s and a total assay time below 3 min. With surface wipe sampling, the biosensor was able to detect 300 pg of cocaine. This immunosensor belongs to the most sensitive and fastest detectors for cocaine and offers near-continuous analyte measurement. KW - Online detection KW - Security KW - Monoclonal antibody KW - Microfluidic mixing KW - Microfluidics KW - Lab-on-a-chip KW - Monolithic column KW - Affinity chromatography KW - Laser-induced fluorescence KW - LIF KW - ELISA KW - Wipe test KW - Low-cost PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-534487 DO - https://doi.org/10.3390/bios11090313 VL - 11 IS - 9 SP - 1 EP - 15 PB - MDPI CY - Basel AN - OPUS4-53448 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Paul, Martin A1 - Tannenberg, Robert A1 - Tscheuschner, Georg A1 - Wilke, Marco A1 - Weller, Michael G. T1 - Cocaine Detection by a Laser-induced Immunofluorometric Biosensor T2 - Preprints N2 - The trafficking of illegal drugs by criminal networks at borders, harbors, or airports is an increasing issue in public health as these routes ensure the main supply of illegal drugs. The prevention of drug smuggling, including the installation of scanners and other analytical devices to detect ultra-small traces of drugs within a reasonable time frame, remains a challenge. The presented immunosensor is based on a monolithic affinity column with a large excess of immobilized hapten, which traps fluorescently labeled antibodies as long as the analyte cocaine is absent. In the presence of the drug, some binding sites of the antibody will be blocked, which leads to an immediate breakthrough of the labeled protein, detectable by highly sensitive laser-induced fluorescence with the help of a Peltier-cooled complementary metal-oxide-semiconductor (CMOS) camera. Liquid handling is performed with high-precision syringe pumps and microfluidic chip-based mixing devices and flow cells. The biosensor achieved limits of detection of 23 pM (7 ppt) of cocaine with a response time of 90 seconds and a total assay time below 3 minutes. With surface wipe sampling, the biosensor was able to detect 300 pg of cocaine. This immunosensor belongs to the most sensitive and fastest detectors for cocaine and offers near-continuous analyte measurement. KW - Drug search KW - Customs KW - Confiscation KW - Border surveillance KW - Narcotics KW - International drug trade KW - Drug trafficking KW - Illicit drug KW - Immunosensor KW - Antibodies KW - Detection PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-529951 DO - https://doi.org/10.20944/preprints202107.0521.v1 SP - 1 PB - MDPI CY - Basel AN - OPUS4-52995 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Steglich, P. A1 - Mai, C. A1 - Bondarenko, S. A1 - Paul, Martin A1 - Weller, Michael G. A1 - Schrader, S. A1 - Mai, A. T1 - BioPIC - Integration of Biosensors based on Photonic Integrated Circuits by Local-Backside Etching T2 - ATTRACT Showroom N2 - Silicon photonic sensors are promising candidates for lab-on-a-chip solutions with versatile applications and scalable production prospects using complementary metal-oxide semiconductor (CMOS) fabrication methods. However, the widespread use has been hindered because the sensing area adjoins optical and electrical components making packaging and sensor handling challenging. In this work, a local back-side release of the photonic sensor is employed, enabling a separation of the sensing area from the rest of the chip. This approach allows preserving the compatibility of photonic integrated circuits in the front-end of line and metal interconnects in the back-end of line. T2 - ATTRACT online Conference CY - Online meeting DA - 22.09.2020 KW - Silicon Photonics KW - Photonic Sensor KW - Photonic Integrated Circuits KW - Point-Of-Care-Diagnostics KW - CMOS KW - Microfluidics KW - Lab-on-a-chip KW - Ring resonator PY - 2020 UR - https://attract-eu.com/showroom/project/integration-of-biosensors-based-on-photonic-integrated-circuits-by-local-backside-etching-biopic/ SP - 1 EP - 5 AN - OPUS4-51735 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Paul, Martin A1 - Schleeh, C. A1 - Weller, Michael G. T1 - Development of a high-sensitivity biosensor for the quasi-continuous detection of the explosive TNT and the illegal drug cocaine N2 - An immunofluorometric biosensor with laser-induced fluorescence detection was presented. For TNT an LOD of 60 ppb and for cocaine an LOD of 9 ppb was achieved. A swipe test was performed in less than 3 minutes. No significant cross-reactivity was observed. T2 - 15. Interdisziplinäres Doktorandenseminar des Arbeitskreises Prozessanalytik der GDCh CY - Online meeting DA - 06.09.2021 KW - PETN KW - HMX KW - RDX KW - Microfluidic mixing KW - Lab-on-a-chip KW - Affinity column KW - Monolithic material KW - Sintered glass KW - Dy-654 KW - Flowcell KW - Epifluorescence KW - CMOS camera KW - Diode laser KW - Antibody screening PY - 2021 AN - OPUS4-53329 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kühn, Andreas A1 - Scharf, Oliver A1 - Ordavo, I. A1 - Riesemeier, Heinrich A1 - Reinholz, Uwe A1 - Radtke, Martin A1 - Berger, Achim A1 - Ostermann, Markus A1 - Panne, Ulrich T1 - Pushing the limits for fast spatially resolved elemental distribution patterns JF - Journal of analytical atomic spectrometry N2 - A new setup for fast spatially resolved measurements of elemental trace amounts under total reflection conditions using a new colour X-ray camera is described. Samples prepared on conventional total reflection X-ray fluorescence (TXRF) reflectors were measured at BESSY II synchrotron. A spatial resolution of 50 × 50 µm² was obtained, while the required time for the investigation of a 10 × 10 mm² sample is 30 seconds. The set-up is up to 350 times faster than conventional X-ray fluorescence systems for elemental traces. The major components of the X-ray camera are polycapillary optics and a pn-CCD chip with an active area of 13 × 13 mm². This area is divided into 264 × 264 pixels of 48 × 48 µm². A full X-ray spectrum with a resolution of 152 eV @ 5.9 keV and a chip temperature of 246 K is recorded for each pixel. The chip has a read-out rate of 400 Hz. PY - 2011 DO - https://doi.org/10.1039/c1ja10069f SN - 0267-9477 SN - 1364-5544 VL - 26 SP - 1986 EP - 1989 PB - Royal Society of Chemistry CY - London AN - OPUS4-24386 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Behnke, Thomas A1 - Würth, Christian A1 - Hoffmann, Katrin A1 - Hübner, Martin A1 - Panne, Ulrich A1 - Resch-Genger, Ute T1 - Encapsulation of hydrophobic dyes in polystyrene micro- and nanoparticles via swelling procedures JF - Journal of fluorescence N2 - Aiming at the derivation of a generalized procedure for the straightforward preparation of particles fluorescing in the visible and near-infrared (NIR) spectral region, different swelling procedures for the loading of the hydrophobic polarity-probe Nile Red into nano- and micrometer sized polystyrene particles were studied and compared with respect to the optical properties of the resulting particles. The effect of the amount of incorporated dye on the spectroscopic properties of the particles was investigated for differently sized beads with different surface chemistries, i.e., non-functionalized, aminomodified and PEG-grafted surfaces. Moreover, photostability and leaking studies were performed. The main criterion for the optimization of the dye loading procedures was a high and thermally and photochemically stable fluorescence output of the particles for the future application of these systems as fluorescent labels. KW - Fluorescence KW - Nile red KW - Polystyrene KW - Nanoparticles KW - Microparticles KW - Encapsulation KW - Swelling PY - 2011 DO - https://doi.org/10.1007/s10895-010-0632-2 SN - 1053-0509 SN - 1573-4994 VL - 21 IS - 3 SP - 937 EP - 944 PB - Plenum Publ. Corp. CY - New York, NY AN - OPUS4-22692 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lozano-Martín, D. A1 - Tuma, Dirk A1 - Kipphardt, Heinrich A1 - Khanipour, Peyman A1 - Chamorro, C. R. T1 - Thermodynamic characterization of the (H2 + C3H8) system significant for the hydrogen economy: Experimental (p, rho, T) determination and equation-of-state modelling JF - International Journal of Hydrogen Energy N2 - For the gradual introduction of hydrogen in the energy market, the study of the properties of mixtures of hydrogen with typical components of natural gas (NG) and liquefied petroleum gas (LPG) is of great importance. This work aims to provide accurate experimental (p, rho, T) data for three hydrogen-propane mixtures with nominal compositions (amount of substance, mol/mol) of (0.95 H2 + 0.05 C3H8), (0.90 H2 + 0.10 C3H8), and (0.83 H2 + 0.17 C3H8), at temperatures of 250, 275, 300, 325, 350, and 375 K, and pressures up to 20 MPa. A single-sinker densimeter was used to determine the density of the mixtures. Experimental density data were compared to the densities calculated from two reference equations of state: the GERG-2008 and the AGA8-DC92. Relative deviations from the GERG-2008 EoS are systematically larger than those from the AGA8-DC92. They are within the ±0.5% band for the mixture with 5% of propane, but deviations are higher than 0.5% for the mixtures with 10% and 17% of propane, especially at low temperatures and high pressures. Finally, the sets of new experimental data have been processed by the application of two different statistical equations of state: the virial equation of state, through the second and third virial coefficients, B(T, x) and C(T, x), and the PC-SAFT equation of state. KW - Hydrogen-containing gas mixture KW - Density data KW - Equation of state KW - Virial coefficients PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-570056 DO - https://doi.org/10.1016/j.ijhydene.2022.11.170 SN - 0360-3199 VL - 48 IS - 23 SP - 8645 EP - 8667 PB - Elsevier B. V. CY - Amsterdam AN - OPUS4-57005 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Abad Andrade, Carlos Enrique A1 - Florek, S. A1 - Becker-Ross, H. A1 - Huang, M.-D. A1 - de Oliveira Guilherme Buzanich, Ana A1 - Radtke, Martin A1 - Lippitz, Andreas A1 - Hodoroaba, Vasile-Dan A1 - Schmid, Thomas A1 - Heinrich, Hans-Joachim A1 - Recknagel, Sebastian A1 - Jakubowski, Norbert A1 - Panne, Ulrich T1 - Zirconium permanent modifiers for graphite furnaces used in absorption spectrometry: understanding their structure and mechanism of action JF - Journal of Analytical Atomic Spectrometry N2 - The mechanism of action of zirconium permanent modifiers on graphite surfaces was investigated in order to understand its influence on the analytical signal in atomic and molecular absorption spectrometry (AAS/MAS). For this, the molecule formation of CaF was studied, which is used for the indirect analytical determination of fluorine in high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GFMAS). The kinetics of this reaction was established by monitoring its molecular spectrum at different atomisation temperatures. An Arrhenius plot showed a pseudo-first order reaction with respect to fluorine (n = 1). An intermediate state was isolated, and its structure was elucidated by spectroscopic methods: scanning electron microscopy with energy dispersive X-ray spectroscopy (SEMEDX), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XANES and EXAFS), and Raman microspectroscopy. We propose here a mechanism, where ZrO2 acts as a heterogeneous catalyst: after a pyrolytic step, an intermediate state of ZrO(OCaF) is activated, and at higher temperatures, CaF(g) is released from the zirconium-coated graphite surface. No evidence of the formation of zirconium carbide was found. Consequently, as the CaF formation is catalysed by a heterogeneous catalyst, surface modifications with ZrO2 nanoparticles and ZrO xerogels were investigated in order to increase the surface area. Their influence was evaluated in the molecule formation of CaF, CaCl, CaBr, and CaI. Graphite furnace modification with zirconium oxide nanoparticles proves to be the best choice for fluorine analysis with a signal enhancement of more than eleven times with respect a non-coated graphite furnace. However, the influence of zirconium modifications in the analytical signals of Cl, and I is lower than the F signals or even negative in case of the Br. Understanding zirconium modifiers as heterogeneous catalysts offers a new perspective to AAS and MAS, and reveals the potential of surface analytical methods for development of improved permanent modifiers and graphite furnace coatings. KW - Zirconium KW - HR-CS-MAS KW - Graphite furnace KW - Nanoparticles KW - Xerogel KW - Calcium monofluoride KW - Absorption spectrometry PY - 2018 UR - https://pubs.rsc.org/en/content/articlelanding/2018/ja/c8ja00190a DO - https://doi.org/10.1039/C8JA00190A SN - 0267-9477 VL - 33 IS - 12 SP - 2034 EP - 2042 PB - Royal Society of Chemistry AN - OPUS4-46775 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Interphase Characterization via the Stiffness Contrast of a Scanning Force Microscope in Displacement Modulation Mode JF - Surface and interface analysis N2 - The physical properties as well as the thickness of the interphase between polymer and reinforcing phase are generally expected to show a strong influence on the macroscopic mechanical properties of composite materials. In this study the scanning force microscope (SFM) has been applied for detecting stiffness gradients near the interface between copper and epoxide. In displacement modulation mode the load exerted by the tip is modulated sinusoidally by vibrating the normal position of the cantilever or the sample. The corresponding amplitude of dynamic cantilever bending is related to local surface stiffness. Thus, using the SFM, the local mechanical properties of the surface under investigation can be probed. When scanning the tip across the reinforcement/polymer interface, the polymeric interphasial zone can be identified with the observed stiffness gradient. For a commercial epoxide based on diglycidyl ether of bisphenol A (DGEBA) cured with an amine-containing hardener, a stiffness gradient was detected that could be fitted by a Gaussian profile typical for diffusional processes. The width of the stiffness gradient was 280 nm. The observation is discussed in terms of interface-induced segregation processes between resin and hardener, as well as heat conduction mechanisms that can occur during the exothermic curing reaction. Both mechanisms are diffusional in nature and, via the local network structure, are expected to show some influence on the local stiffness of the cured epoxy. Copyright © 2000 John Wiley & Sons, Ltd. T2 - ECASIA 99 CY - Sevilla, Spain DA - 1999-10-04 KW - Scanning Force Microscopy KW - Surface properties KW - Nanomechanics KW - Interface/Interphase KW - Polymer-matrix composites (PMCs) KW - Adherends PY - 2000 DO - https://doi.org/10.1002/1096-9918(200008)30:1<410::AID-SIA846>3.0.CO;2-G SN - 0142-2421 SN - 1096-9918 VL - 30 IS - 1 SP - 410 EP - 414 PB - Wiley CY - Chichester AN - OPUS4-873 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - The scanning force microscope as a tool for the detection of local mechanical properties within the interphase of fibre reinforced polymers JF - Composites / A N2 - Scanning force microscopy (SFM) has been used to assess the local mechanical properties of fibre-reinforced polymers. Using a sinusoidal displacement modulation (DM) and lock-in technique the method allows to characterize local viscoelastic properties with a high lateral resolution. The simultaneous measurement of the local electrical conductivity is proposed which facilitates the interpretation of the mechanical data. The investigation of cross-sections perpendicular to the axis of carbon fibres embedded in PPS delivers some information about the change in local stiffness within the interfacial region. As a first approach, assuming a single-exponential decrease in local stiffness along a radial line from fibre to polymer we find characteristic decay lengths which are distributed in a range between 20 and 80nm. Further, a modified DM-mode is proposed which is expected to provide a contrast enhancement of the signal which is related to local stiffness. This can be achieved by installing an additional feedback loop which keeps constant the amplitude of dynamic indentation (CDI-mode). KW - Polymer-matrix composites (PMC´s) KW - Interface/interphase KW - SFM/AFM KW - Surface properties KW - Nondestructive testing PY - 1998 DO - https://doi.org/10.1016/S1359-835X(98)00077-3 SN - 1359-835X VL - 29 SP - 1251 EP - 1259 PB - Elsevier CY - Oxford AN - OPUS4-1294 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Munz, Martin A1 - Schulz, Eckhard A1 - Sturm, Heinz T1 - Use of scanning force microscopy studies with combined friction, stiffness and thermal diffusivity contrasts for microscopic characterization of automotive brake pads JF - Surface and interface analysis KW - Antimony sulphide KW - Polybutadiene KW - Phenolic resin KW - SFM/AFM KW - Friction KW - Thermal diffusivity PY - 2002 DO - https://doi.org/10.1002/sia.1171 SN - 0142-2421 SN - 1096-9918 VL - 33 IS - 2 SP - 100 EP - 107 PB - Wiley CY - Chichester AN - OPUS4-1293 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - RPRT A1 - Fettig, Ina A1 - Seeger, Stefan A1 - Werrel, Martin A1 - Deubel, Jan A1 - Raspe, Tina A1 - Piechotta, Christian A1 - Krüger, Simone T1 - Raumbrände - Teil 2: Versuchsaufbau und Brandspurenanalytik T2 - BAM Innovationsoffensive - Projekt Brandspurenanalytik N2 - Der vorliegende Bericht ist der 2.Teil eines Gesamtberichtes und schildert ausführlich die im Kontext des BAM-Innovationsoffensive-Projektes „Chemische Brandspurenanalytik“ durchgeführten Untersuchungen und fasst die gewonnenen analytischen Erkenntnisse zusammen. Der gesamte Bericht gliedert sich in drei Teile. Der erste Teil beinhaltet den Aufbau, die Durchführung und die brandtechnologische Auswertung der durchgeführten Raumbrandversuche, während in dem hier vorliegenden Teil die analytischen Methoden zum Nachweis des Brandbeschleunigers in den Brandrückständen vorgestellt und ausgewertet werden. Die Beurteilung von Brandspuren und daraus abgeleitet die Rekonstruktion eines Brandverlaufes beruhen auch auf der präzisen chemischen Analyse der Brandprodukte. Im Rahmen dieses Projektes wurde eine innovative Methodik entwickelt, wie verfügbare Analysetechniken in geeigneter Weise kombiniert werden können, um aus festen, flüssigen und gasförmigen Brandrückständen Rückschlüsse auf den Brandverlauf ziehen zu können. Neben der Untersuchung von Proben von realen Brandorten wurden verschiedene wohnungstypische Materialien unter Laborbedingungen unterschiedlichen Brandszenarien unterworfen. Die dabei entstehenden Brandgase, Aerosole sowie der verbleibende Brandrückstand wurden durch geeignete analytische Verfahren analysiert, um mögliche Brandursachen beurteilen zu können. Der Schwerpunkt dieses Berichtes liegt in dem Nachweis von Brandbeschleunigern. Es zeigte sich, dass mittels der Kombination aus HS-SPME-GC-MS sowohl in den festen Brandrückständen, als auch in den Kondensaten Brandbeschleuniger eindeutig und verlässlich nachgewiesen werden können. Anhand von 5 verschiedenen Zimmerbrandversuchen wurde der Einfluss von Brandbeschleunigern auf den Brandverlauf experimentell untersucht. Es wurden verschiedene brandtechnologische Kennwerte, wie der Massenverlust des gesamten Brandraums, Brandraumtemperaturen, die Wärmefreisetzungen sowie die Rauchgasemissionen ermittelt und beurteilt. Die Rauchgasanalyse erfolgte im Schlot, im Brandraum sowie in der Brandraumöffnung mittels Fourier Transformierte Infrarot-FTIR-Spektroskopie. Neben diesen brandtechnologischen Untersuchungen, die im Bericht Teil 1 enthalten sind, erfolgten auch chemisch-analytische Untersuchungen nach dem Brand, mit dem Ziel, den eingesetzten Brandbeschleuniger nachzuweisen. Im Anschluss an die jeweiligen Zimmerbrandversuche wurden verschiedene Brandrückstandsproben aus dem Brandschutt, Wischproben von den Wänden und den übriggebliebenen Gegenständen genommen und mit Hilfe einer entwickelten HS-SPME-GC-MS-Methode (Headspace-Solid Phase Micro Extraction-Gas Chromatographie-Massenspekrometrie) in Hinblick eines möglichen Brandbeschleunigernachweis analysiert. KW - Raumbrände KW - Rauchgase KW - Wärmefreisetzung KW - Rauchgastemperaturen KW - Analytik PY - 2013 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-301257 SN - 978-3-9815944-8-5 SP - 1 EP - 190 PB - Bundesanstalt für Materialforschung und -prüfung (BAM) CY - Berlin AN - OPUS4-30125 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ahlawat, A. A1 - Seeger, Stefan A1 - Gottschalk, Martin A1 - Tuch, T. A1 - Wiedensohler, A. T1 - Observation of systematic deviations between Faraday cup aerosol electrometers for varying particle sizes and flow rates - results of the AEROMET FCAE workshop JF - Metrologia N2 - Condensation particle counters (CPCs) are widely used for the measurement of aerosol particle number concentrations in the size range from approximately 3 nm to 3 μm. For an SI-traceable calibration of the size-dependent counting efficiency, which is advisable on a regular basis and required in several applications, Faraday cup aerosol electrometers (FCAEs) are considered to be a suitable SI-traceable reference.While the volumetric aerosol inlet flowrate and the electrical current measurement in FCAEs can be related to respective SI references, inter-comparison exercises for FCAEs are still performed on a regular basis to establish reliable uncertainty budgets and to further investigate the influences of designs and operational parameters on comparability. This is strongly demanded in the international community of metrological institutes and aerosol calibration facilities around the world, which provide CPC calibrations. In the present study, the performance of FCAEs was investigated,using Ag test aerosol particles with a 30 nm particle diameter by varying the inlet flowrates from 0.5 l min−1 to 4 l min−1. From our experimental results, significant deviations were observed in FCAE currents at sample flowrates smaller than 1.5 l min−1. It is recommended that these discrepancies should be quantified before an FCAE is used for CPC calibration at low sample flowrates and small particle sizes in the sub-30 nm size range. KW - Faraday cup aerosol electrometer KW - CPC calibration KW - Inter-comparison KW - Aerosol measurement instruments PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-531315 DO - https://doi.org/10.1088/1681-7575/ac0710 SN - 1681-7575 SN - 0026-1394 VL - 58 IS - 5 SP - 1 EP - 8 PB - Institute of Physics (IOP) CY - Bristol, UK AN - OPUS4-53131 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Vigna, L. A1 - Gottschalk, Martin A1 - Cacocciola, N. A1 - Verna, A. A1 - Marasso, S. L. A1 - Seeger, Stefan A1 - Pirri, C.F. A1 - Cocuzza, M. T1 - Flexible and reusable parylene C mask technology for applications in cascade impactor air quality monitoring systems JF - Micro and Nano Engineering N2 - The development of traceable new methodologies to quantify elemental air pollutants in particulate matter (PM) supports modernization of methods used in air quality monitoring networks in Europe. In the framework of the EURAMET EMPIR AEROMET II project, the combination of cascade impactor aerosol sampling and total reflection X-ray fluorescence elemental spectroscopy (TXRF) was investigated. This technique requires a traceable calibration based on reference samples. This paper describes a new, simple and effective method to produce such reference samples using flexible, reusable, and low-cost parylene C shadow masks, fabricated by photolithographic steps. These shadow masks can be used to produce reference samples that mimic the Dekati cascade impactor’s deposition patterns by applying as-prepared micro stencils to 30 mm acrylic substrates and evaporating a reference material (Ti) in arrangements of thin circular dots. The highly flexible direct patterning of acrylic discs with reference material, otherwise impossible with conventional photolithography, allows multiple reusing of the same micro stencils. The aspect ratios of the dots could be repeated with an error less than 4 %. A first set of standard reference samples for the 13 stages of the Dekati cascade impactor was produced and preliminary TXRF measurements of the deposited Ti masses were performed. The centricity of the deposition patterns turned out to be an important parameter for the quality of the TXRF results. The parylene mask technology for the production of reference samples turns out to be a promising new approach for the traceable calibration of TXRF spectrometers for the quantification of element concentrations in environmental aerosol samples but, due to its great versatility, it could be used for several other micropatterning applications on conventional and unconventional substrates. KW - AEROMET II KW - Aerosol KW - Parylene C KW - Reference samples KW - Flexible shadow masks KW - Cascade impactor KW - Air quality monitoring KW - Micropatterning KW - Mask fabrication KW - Elemental aerosol analysis KW - TXRF PY - 2022 DO - https://doi.org/10.1016/j.mne.2022.100108 SN - 2590-0072 VL - 14 SP - 1 EP - 19 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-54252 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Steglich, P. A1 - Rabus, D. G. A1 - Sada, C. A1 - Paul, Martin A1 - Weller, Michael G. A1 - Mai, C. A1 - Mai, A. T1 - Silicon Photonic Micro-Ring Resonators for Chemical and Biological Sensing: A Tutorial T2 - TechRixv N2 - Silicon photonic micro-ring resonators (MRR) developed on the silicon-on-insulator (SOI) platform, owing to their high sensitivity and small footprint, show great potential for many chemical and biological sensing applications such as label-free detection in environmental monitoring, biomedical engineering, and food analysis. In this tutorial, we provide the theoretical background and give design guidelines for SOI-based MRR as well as examples of surface functionalization procedures for label-free detection of molecules. After introducing the advantages and perspectives of MRR, fundamentals of MRR are described in detail, followed by an introduction to the fabrication methods, which are based on a complementary metal-oxide semiconductor (CMOS) technology. Optimization of MRR for chemical and biological sensing is provided, with special emphasis on the optimization of waveguide geometry. At this point, the difference between chemical bulk sensing and label-free surface sensing is explained, and definitions like waveguide sensitivity, ring sensitivity, overall sensitivity as well as the limit of detection (LoD) of MRR are introduced. Further, we show and explain chemical bulk sensing of sodium chloride (NaCl) in water and provide a recipe for label-free surface sensing. KW - Lab on a chip KW - Biosensor KW - Cmos KW - Silanization KW - Surface derivatization KW - Evanescent wave PY - 2021 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-529360 DO - https://doi.org/10.36227/techrxiv.14909901.v1 SP - 1 EP - 18 PB - IEEE CY - Piscataway Township AN - OPUS4-52936 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tannenberg, Robert A1 - Paul, Martin A1 - Röder, Bettina A1 - Gande, S. L. A1 - Sreeramulu, S. A1 - Saxena, K. A1 - Richter, C. A1 - Schwalbe, H. A1 - Swart, C. A1 - Weller, Michael G. T1 - Chemiluminescence biosensor for the determination of cardiac troponin I (cTnI) JF - Biosensors N2 - Cardiac troponin I (cTnI) is a crucial biomarker for diagnosing cardiac vascular diseases, including acute myocardial infarction (AMI). This study presents a proof-of-concept chemiluminescence-based immunosensor for rapid and accurate measurement of cTnI, with the potential for online monitoring. The immunosensor incorporates a flow cell design and a sensitive complementary metal-oxide-semiconductor (CMOS) camera for optical readout. A microfluidic setup was established to enable selective and quasi-online determination of cTnI within ten minutes. The sensor was tested with recombinant cTnI in phosphate buffer, demonstrating measurements in the concentration range of 2–25 µg/L, with a limit of detection (LoD) of 0.6 µg/L (23 pmol/L) achieved using the optimized system. The immunosensor exhibited high selectivity, as no cross-reactivity was observed with other recombinant proteins such as cTnT and cTnC at a concentration of 16 µg/L. Measurements with diluted blood plasma and serum yielded an LoD of 60 µg/L (2.4 nmol/L) and 70 µg/L (2.9 nmol/L), respectively. This biosensor offers a promising approach for the rapid and sensitive detection of cTnI, contributing to the diagnosis and management of acute myocardial infarction and other cardiac vascular diseases. N2 - Das kardiale Troponin I (cTnI) ist ein wichtiger Biomarker für die Diagnose von Herz-Kreislauf-Erkrankungen, einschließlich des akuten Myokardinfarkts (AMI). In dieser Studie wird ein auf Chemilumineszenz basierender Immunsensor für die schnelle und genaue Messung von cTnI vorgestellt, der das Potenzial für eine Online-Überwachung hat. Der Immunsensor besteht aus einer Durchflusszelle und einer empfindlichen CMOS-Kamera (Complementary Metal-Oxide-Semiconductor) zur optischen Detektion. Es wurde ein mikrofluidischer Aufbau entwickelt, der eine selektive und quasi Online-Bestimmung von cTnI innerhalb von zehn Minuten ermöglicht. Der Sensor wurde mit rekombinantem cTnI in Phosphatpuffer getestet und zeigte einen Messbereich von 2-25 µg/L, wobei mit dem optimierten System eine Nachweisgrenze (LoD) von 0,6 µg/L (23 pmol/L) erreicht wurde. Der Immunsensor zeigte eine hohe Selektivität, da keine Kreuzreaktivität mit anderen rekombinanten Proteinen wie cTnT und cTnC bei einer Konzentration von 16 µg/L beobachtet wurde. Messungen mit verdünntem Blutplasma und Serum ergaben einen LoD von 60 µg/L (2,4 nmol/L) bzw. 70 µg/L (2,9 nmol/L). Dieser Biosensor bietet einen vielversprechenden Ansatz für den schnellen und empfindlichen Nachweis von cTnI, der zur Diagnose und Behandlung des akuten Myokardinfarkts und anderer kardialer Gefäßerkrankungen beitragen kann. KW - Acute myocardial infarction KW - Heart attack KW - Emergency KW - Diagnosis KW - Cardiac troponin KW - Biomarker KW - Immunosensor KW - Biosensor KW - Chemiluminescence KW - Luminol KW - Peroxidase KW - Monoclonal antibodies KW - Flow injection immunoassay KW - Immunometric assay KW - Immunometric biosensor KW - Microfluidic system KW - Monolithic column KW - Online biosensor PY - 2023 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-575471 DO - https://doi.org/10.3390/bios13040455 SN - 2079-6374 VL - 13 IS - 4 SP - 1 EP - 20 PB - MDPI CY - Basel AN - OPUS4-57547 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Kuhne, Maren A1 - Dippong, Martin A1 - Flemig, Sabine A1 - Hoffmann, Katrin A1 - Petsch, K. A1 - Schenk, J.A. A1 - Kunte, Hans-Jörg A1 - Schneider, Rudolf T1 - Comparative characterization of mAb producing hapten-specific hybridoma cells by flow cytometric analysis and ELISA JF - Journal of immunological methods N2 - A novel method that optimizes the screening for antibody-secreting hapten-specific hybridoma cells by using flow cytometry is described. Cell clones specific for five different haptens were analyzed. We selectively double stained and analyzed fixed hybridoma cells with fluorophore-labeled haptens to demonstrate the target-selectivity, and with a fluorophore-labeled anti-mouse IgG antibody to characterize the level of surface expression of membrane-bound IgGs. ELISA measurements with the supernatants of the individual hybridoma clones revealed that antibodies from those cells, which showed the highest fluorescence intensities in the flow cytometric analysis, also displayed the highest affinities for the target antigens. The fluorescence intensity of antibody-producing cells corresponded well with the produced antibodies' affinities toward their respective antigens. Immunohistochemical staining verified the successful double labeling of the cells. Our method makes it possible to perform a high-throughput screening for hybridoma cells, which have both an adequate IgG production rate and a high target affinity. KW - Immunization KW - Hapten KW - Monoclonal antibodies KW - Hybridoma KW - Flow cytometry KW - ELISA KW - Estradiol KW - Estrone KW - Digoxigenin KW - Zearalenone KW - Aflatoxin KW - CLSM PY - 2014 DO - https://doi.org/10.1016/j.jim.2014.07.004 SN - 0022-1759 SN - 1872-7905 VL - 413 SP - 45 EP - 56 PB - Elsevier B.V. CY - Amsterdam AN - OPUS4-32322 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Dippong, Martin A1 - Carl, Peter A1 - Lenz, C. A1 - Schenk, J. A. A1 - Hoffmann, Katrin A1 - Schwaar, Timm A1 - Schneider, Rudolf A1 - Kuhne, Maren T1 - Hapten-specific single-cell selection of hybridoma clones by fluorescence-activated cell sorting for the generation of monoclonal antibodies JF - Analytical Chemistry N2 - The conventional hybridoma screening and subcloning process is generally considered to be one of the most critical steps in hapten-specific antibody production. It is time-consuming, monoclonality is not guaranteed, and the number of clones that can be screened is limited. Our approach employs a novel hapten-specific labeling technique of hybridoma cells. This allows for fluorescence-activated cell sorting (FACS) and single-cell deposition and thereby eliminates the above-mentioned problems. A two-step staining approach is used to detect antigen specificity and antibody expression: in order to detect antigen specificity, hybridoma cells are incubated with a hapten−horseradish peroxidase conjugate (hapten−HRP), which is subsequently incubated with a fluorophore-labeled polyclonal anti-peroxidase antibody (anti-HRP−Alexa Fluor 488). To characterize the expression of membrane-bound immunoglobulin G (IgG), a fluorophore-labeled anti-mouse IgG antibody (anti-IgG−Alexa Fluor 647) is used. Hundreds of labeled hybridoma cells producing monoclonal antibodies (mAbs) specific for a hapten were rapidly isolated and deposited from a fusion mixture as single-cell clones via FACS. Enzyme-linked immunosorbent assay (ELISA) measurements of the supernatants of the sorted hybridoma clones revealed that all hapten-specific hybridoma clones secrete antibodies against the target. There are significant improvements using this high-throughput technique for the generation of mAbs including increased yield of antibody-producing hybridoma clones, ensured monoclonality of sorted cells, and reduced development times. KW - Monoclonal antibodies KW - FACS KW - Hybridoma cells PY - 2017 DO - https://doi.org/10.1021/acs.analchem.6b04569 SN - 0003-2700 SN - 1520-6882 VL - 89 IS - 7 SP - 4007 EP - 4012 PB - ACS Publications AN - OPUS4-40320 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schmidt, Stephan A1 - Hoffmann, Holger A1 - Garbe, Leif-Alexander A1 - Harrer, Andrea A1 - Steiner, Markus A1 - Himly, Martin A1 - Schneider, Rudolf T1 - Re-assessment of monoclonal antibodies against diclofenac for their application in the analysis of environmental waters JF - Analytical Methods N2 - The non-steroidal anti-inflammatory drug (NSAID) diclofenac (DCF) is an important environmental contaminant occurring in surface waters all over the world, because, after excretion, it is not adequately removed from wastewater in sewage treatment plants. To be able to monitor this pollutant, highly efficient analytical methods are needed, including immunoassays. In a medical research project, monoclonal antibodies against diclofenac and its metabolites had been produced. Based on this monoclonal anti-DCF antibody, a new indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed and applied for environmental samples. The introduction of a spacer between diclofenac and the carrier protein in the coating conjugate led to higher sensitivity. With a test midpoint of 3 mg L−1 and a measurement range of 1–30 mg L−1, the system is not sensitive enough for direct analysis of surface water. However, this assay is quite robust against matrix influences and can be used for wastewater. Without adjustment of the calibration, organic solvents up to 5%, natural organic matter (NOM) up to 10 mg L−1, humic acids up to 2.5 mg L−1, and salt concentrations up to 6 g L−1 NaCl and 75 mg L−1 CaCl2 are tolerated. The antibody is also stable in a pH range from 3 to 12. Cross-reactivity (CR) of 1% or less was determined for the metabolites 40-hydroxydiclofenac (40-OH-DCF), 5-hydroxydiclofenac (5-OH-DCF), DCF lactam, and other NSAIDs. Relevant cross-reactivity occurred only with an amide derivative of DCF, 6-aminohexanoic acid (DCF-Ahx), aceclofenac (ACF) and DCF methyl ester (DCF-Me) with 150%, 61% and 44%, respectively. These substances, however, have not been found in samples. Only DCF-acyl glucuronide with a cross-reactivity of 57% is of some relevance. For the first time, photodegradation products were tested for cross-reactivity. With the ELISA based on this antibody, water samples were analysed. In sewage treatment plant effluents, concentrations in the range of 1.9–5.2 mg L−1 were determined directly, with recoveries compared to HPLC-MS/MS averaging 136%. Concentrations in lakes ranged from 3 to 4.4 ng L−1 and were, after pre-concentration, determined with an average recovery of 100% KW - Antikörper KW - Immunoassay KW - Wasser PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-602280 DO - https://doi.org/10.1039/d3ay01333b VL - 16 IS - 21 SP - 3349 EP - 3363 PB - Royal Society of Chemistry (RSC) CY - London AN - OPUS4-60228 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Braymer, Joseph J. A1 - Stehling, Oliver A1 - Stümpfig, Martin A1 - Rösser, Ralf A1 - Spantgar, Farah A1 - Blinn, Catharina M. A1 - Mühlenhoff, Ulrich A1 - Pierik, Antonio J. A1 - Lill, Roland T1 - Requirements for the biogenesis of [2Fe-2S] proteins in the human and yeast cytosol JF - Proceedings of the National Academy of Sciences N2 - The biogenesis of iron–sulfur (Fe/S) proteins entails the synthesis and trafficking of Fe/S clusters, followed by their insertion into target apoproteins. In eukaryotes, the multiple steps of biogenesis are accomplished by complex protein machineries in both mitochondria and cytosol. The underlying biochemical pathways have been elucidated over the past decades, yet the mechanisms of cytosolic [2Fe-2S] protein assembly have remained ill-defined. Similarly, the precise site of glutathione (GSH) requirement in cytosolic and nuclear Fe/S protein biogenesis is unclear, as is the molecular role of the GSH-dependent cytosolic monothiol glutaredoxins (cGrxs). Here, we investigated these questions in human and yeast cells by various in vivo approaches. [2Fe-2S] cluster assembly of cytosolic target apoproteins required the mitochondrial ISC machinery, the mitochondrial transporter Atm1/ABCB7 and GSH, yet occurred independently of both the CIA system and cGrxs. This mechanism was strikingly different from the ISC-, Atm1/ABCB7-, GSH-, and CIA-dependent assembly of cytosolic–nuclear [4Fe-4S] proteins. One notable exception to this cytosolic [2Fe-2S] protein maturation pathway defined here was yeast Apd1 which used the CIA system via binding to the CIA targeting complex through its C-terminal tryptophan. cGrxs, although attributed as [2Fe-2S] cluster chaperones or trafficking proteins, were not essential in vivo for delivering [2Fe-2S] clusters to either CIA components or target apoproteins. Finally, the most critical GSH requirement was assigned to Atm1-dependent export, i.e. a step before GSH-dependent cGrxs function. Our findings extend the general model of eukaryotic Fe/S protein biogenesis by adding the molecular requirements for cytosolic [2Fe-2S] protein maturation. KW - Biokorrosion KW - Hydrogenasen KW - Microbially Induced Corrosion PY - 2024 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-602328 DO - https://doi.org/10.1073/pnas.2400740121 VL - 121 IS - 21 SP - 1 EP - 12 PB - Proceedings of the National Academy of Sciences CY - Washington D.C. AN - OPUS4-60232 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Gleim, Tobias A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Combustion Chamber Design for Encapsulated Wood-Component Testing T2 - Wood & Fire Safety 2024 - Proceedings of the 10th International Conference on Wood & Fire Safety 2024 N2 - Heavy-weight packages for the safe transport of radioactive material are equippedwith impact limiters often built ofwood-filled steel sheet structures to fulfil the requirements of the International Atomic Energy Agency (IAEA) regulations. The requirements definemechanical tests followed by a thermal test, including criteria ensuring the package design’s ability to withstand severe accidents and provide a high level of technical safety. Impact limiters are a package component mainly designed for the packages to withstand severe mechanical accident scenarios. In drop tests the impact limiters absorb the kinetic energy during impact of the package. The package must then - with its pre-damaged impact limiters - endure a thermal test defined precisely in the IAEA regulations as a 30-min fully engulfing 800 °C-fire. After the fire, a wood-filled impact limiter may continue to release thermal energy from an ongoing combustion process, defining relevant package temperatures. The energy flow from a possible burning impact limiter to the package is important for the safety evaluation of transport packages. To investigate the combustion behaviour of densely packed layers of spruce wood, encapsulated in pre-damaged cylindrical metal enclosures, a test set-up has been realised. The set-up consists of a combustion chamber to perform these tests under defined boundary conditions. The temperature development of the test specimens will be observed fromoutside with a thermographic imager, with HD-Cameras, and the mass loss will be measured during the entire test. Airflow conditions in the combustion chamber are analysed using Computational Fluid Dynamics (CFD) calculations in OpenFOAM. The planned combustion test setup is described. T2 - Wood & Fire Safety 2024 CY - Štrbské Pleso, Slovakia DA - 12.05.2024 KW - Fire KW - Combustion KW - Smouldering PY - 2024 SN - 978-3-031-59176-1 SN - 978-3-031-59179-2 SN - 978-3-031-59177-8 DO - https://doi.org/10.1007/978-3-031-59177-8 SP - 215 EP - 222 PB - Springer Nature Switzerland AG CY - Gewerbestrasse 11, 6330 Cham, Switzerland AN - OPUS4-60226 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Sturm, Heinz ED - Bhushan, B. T1 - Nanomechanical Characterization of Structural and Pressure-Sensitive Adhesives T2 - Applied scanning probe methods / 7: Biomimetics and industrial applications (NanoScience and technology) KW - Scanning Force Microscopy KW - Modulated Lateral Force Microscopy KW - Stiffness KW - Friction KW - Interface/Interphase Interdiffusion PY - 2007 SN - 3-540-37320-9 DO - https://doi.org/10.1007/978-3-540-37321-6_8 VL - 7 SP - 301 EP - 347 PB - Springer CY - Berlin AN - OPUS4-14974 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Lozano-Martín, D. A1 - Akubue, G. U. A1 - Moreau, A. A1 - Tuma, Dirk A1 - Chamorro, C. R. T1 - Accurate experimental (p, rho, T) data of the (CO2 + O2) binary system for the development of models for CCS processes JF - Journal of Chemical Thermodynamics N2 - The limited availability of accurate experimental data in wide ranges of pressure, temperature, and composition is the main constraining factor for the proper development and assessment of thermodynamic models and equations of state. In the particular case of carbon capture and storage (CCS) processes, there is a clear need for data sets related to the (carbon dioxide + oxygen) mixtures that this work aims to address. This work provides new experimental (p, rho, T) data for three binary (CO2 + O2) mixtures with mole fractions of oxygen x(O2) = (0.05, 0.10, and 0.20) mol/mol, in the temperature range T = (250 to 375) K and pressure range p = (0.5 to 13) MPa. The measurements were performed with a high-precision single-sinker densimeter with magnetic suspension coupling. The density data were obtained with estimated expanded relative uncertainties of 0.02 % for the highest densities and up to 0.3 % for the lowest ones.The results were compared to the corresponding results calculated by the current reference equations of state for this kind of mixtures, namely the EOS-CG (combustion gases) and the GERG-2008 equation of state, respectively. The EOS-CG yields better estimations in density than the GERG-2008 equation of state. The results from the EOS-GC model show no systematic temperature dependence. For the GERG-2008 model, however, this criterion is significantly less fulfilled. KW - carbon capture and storage KW - single-sinker densimeter KW - equation of state PY - 2020 DO - https://doi.org/10.1016/j.jct.2020.106210 SN - 0021-9614 VL - 150 SP - 106210 PB - Elsevier Ltd. CY - Amsterdam AN - OPUS4-50925 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Martin A1 - Lorenzetti, Alessandra A1 - Schartel, Bernhard T1 - Fire phenomena of rigid polyurethane foams N2 - This work investigates the fire phenomena of rigid polyurethane foams (RPUF) in detail. To elucidate structure-property relationships systematically varied sets of foams were prepared. RPUF were synthesized with different densities using water and pentane as blowing agent. What is more, a flame retarded RPUF and rigid polyisocyanurate-polyurethane foams were examined. The comprehensive understanding of the processes taking place during combustion is the foundation of customized development of successful flame retardant approaches. Advanced cone calorimeter investigations provide insight into the fire behavior under forced flaming conditions. Thermocouples in the inside of specimens give information about the temperature gradient and temperature of the pyrolysis zone during combustion. Furthermore, fire phenomena were characterized using SEM, LOI and thermal analysis. By using a multi-methodological approach and systematically varied sets of foam materials, new insights into the burning of RPUF were won. The detailed knowledge of fire phenomena is essential for future development of tailored flame retardant strategies for RPUF. T2 - 15th International Conference on Advances in Foam Materials & Technology, FOAMS 2017 CY - Bayreuth, Germany DA - 11.10.2017 KW - Foam KW - Cone calorimeter KW - Flame retardancy KW - Fire behaviour KW - Polyurethane PY - 2017 AN - OPUS4-42755 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard A1 - Günther, Martin T1 - Flammschutz von Polyurethanen JF - PU Magazin N2 - Polyurethane (PU) bilden eine der vielseitigsten Klassen der Polymerwerkstoffe. Kein anderer Kunststoff wird sowohl als Thermoplast, als Elastomer wie auch als Duroplast verarbeitet und eingesetzt. Entsprechend vielfältig sind auch die Anforderungen an den Flammschutz. Je nach Material und Anwendung müssen spezifische Brandnormen erfüllt werden. Der vorliegende Aufsatz gibt einen Überblick über die verfügbaren Ansätze, um durch geeignete Auswahl der Rohstoffe und der Flammschutzmittel diese verschiedensten Anforderungen an das Brandverhalten zu erfüllen. KW - Polyurethan KW - Flammschutz KW - Pyrolyse KW - Schaum KW - Cone calorimeter PY - 2020 VL - 20 IS - 1 SP - 48 EP - 53 PB - Dr. Gupta AN - OPUS4-50736 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Schartel, Bernhard A1 - Günther, Martin T1 - Flame retardancy of polyurethanes JF - PU Magazine N2 - Polyurethanes (PU) represent one of the most versatile classes of plastics. They are processed and used as thermoplastic, elastomer, and thermoset. The requirements regarding flammability are correspondingly versatile. Depending on the material and the field of application, specific fire tests have to be fulfilled. This paper describes the different concepts used to fulfil these requirements by choosing the right raw materials and flame retardants. KW - Polyurethane KW - Flame retardant KW - Foam KW - Flammability KW - Pyrolysis KW - Cone calorimeter PY - 2020 VL - 17 IS - 1 SP - 44 EP - 48 PB - Dr. Gupta AN - OPUS4-50737 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Strommer, Bettina A1 - Battig, Alexander A1 - Schulze, Dietmar A1 - Agudo Jacome, Leonardo A1 - Schartel, Bernhard A1 - Böhning, Martin T1 - Shape, orientation, interaction, or dispersion: valorization of the influence factors in natural rubber nanocomposites JF - Rubber Chemistry and Technology N2 - The addition of nanoparticles as reinforcing fillers in elastomers yields nanocomposites with unique property profiles, which opens the door for various new application fields. Major factors influencing the performance of nanocomposites are studied by varying the type and shape of nanoparticles and their dispersion in the natural rubber matrix. The industrial applicability of these nanocomposites is put into focus using two types of graphene and a nanoscale carbon black, all commercially available, and scalable processing techniques in the form of a highly filled masterbatch production via latex premixing by simple stirring or ultrasonically assisted dispersing with surfactant followed by conventional two-roll milling and hot pressing. Different processing and measurement methods reveal the potential for possible improvements: rheology, curing behavior, static and dynamic mechanical properties, swelling, and fire behavior. The aspect ratio of the nanoparticles and their interaction with the surrounding matrix prove to be crucial for the development of superior nanocomposites. An enhanced dispersing method enables the utilization of the improvement potential at low filler loadings (3 parts per hundred of rubber [phr]) and yields multifunctional rubber nanocomposites: two-dimensional layered particles (graphene) result in anisotropic material behavior with strong reinforcement in the in-plane direction (157% increase in the Young's modulus). The peak heat release rate in the cone calorimeter is reduced by 55% by incorporating 3 phr of few-layer graphene via an optimized dispersing process. KW - Graphene KW - Natural rubber KW - Nanocomposites KW - Anisotropy KW - Fire behavior PY - 2023 DO - https://doi.org/10.5254/rct.23.77961 SN - 0035-9475 SN - 1943-4804 VL - 96 IS - 1 SP - 40 EP - 58 PB - Allen Press CY - Lawrence (KA), USA AN - OPUS4-57568 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Frasca, Daniele A1 - Schulze, Dietmar A1 - Böhning, Martin A1 - Krafft, Bernd A1 - Schartel, Bernhard T1 - Multilayer graphene chlorine isobutyl isoprene rubber nanocomposites: influence of the multilayer graphene concentration on physical and flame-retardant properties JF - Rubber Chemistry and Technology N2 - In recent years, different nanoparticles have been proposed and successfully introduced as nanofillers in rubber nanocomposites. In this study, multilayer graphene (MLG) is proposed as a nanoparticle that functions efficiently at low concentrations. MLG consists of just 10 or so graphene sheets. Chlorine isobutyl isoprene rubber (CIIR)/MLG nanocomposites with different MLG loadings were prepared using an ultrasonically assisted solution mixing procedure followed by two-roll milling. The incorporation of MLG provides a clear improvement in the rheological, mechanical, curing, and gas barrier properties of the nanocomposites. Adding only 3 phr ofMLGto CIIR increased the Young’s modulus by more than two times and reduced the permeability ofO2 andCO2 by 30%. Higher nanofiller concentrations yielded further improvement in the properties of the nanocomposites. Moreover, CIIR/MLG nanocomposites showed reduced flammability. KW - Graphene KW - Rubber KW - Nanocomposites KW - Flammability KW - Reinforcement PY - 2016 DO - https://doi.org/10.5254/rct.15.84838 SN - 0035-9475 VL - 89 IS - 2 SP - 316 EP - 334 AN - OPUS4-37595 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Martin A1 - Lorenzetti, A. A1 - Schartel, Bernhard T1 - Bubbles And Collapses: Fire Phenomena Of Rigid Polyurethane Foams N2 - Rigid polyurethane foams (RPUF) are widely used in industry and daily life because of their outstanding mechanical and thermal insulating properties. While their convenient mechanical characteristics predestine these materials for shock absorption, their low thermal conductivity is responsible for their excellent thermal insulation properties. A principal characteristic affecting not only the use properties, but also the burning behaviour, is the density of RPUF. In case of fire, cellular polymers like RPUF behave differently from bulk materials. The reason for their comparatively high ignitability is the high rate of temperature rise on the surface when exposed to heat, which is due to their cellular structure and characterised as low thermal inertia. The heat build-up on the surface results in a short time to ignition. Therefore foams are able to develop fire and large amounts of smoke within a short period of time. Even though their fire load is quite low because of their low density, their heat release rate is high. These burning properties are not only a consequence of the chemical consistence of such materials, but also a result of their morphology. The aim of the work is to investigate the fire phenomena of RPUF. Characterised by simultaneous physical and chemical processes which interact, depend, and compete with each other, the combustion of RPUF is a highly complex occurrence. Therefore it is necessary to study all aspects in detail. The fire phenomena that were examined are gasification, liquefaction, charring and structural integrity as well as collapse. The melting of cellular polymers and dripping of pyrolysis products, together with the ability to form pool fires, are the main hazards in fires involving foams. Structural collapse via melting or decomposition, or the retention of the foam’s morphology through charring, are the main characteristics of their burning behaviour. Cellular structure is a further important factor influencing the materials’ response to fire, and deserves examination in greater depth. Since the cells in closed-cell foam are filled with the blowing agent used to produce the material, and this blowing agent can be inert (carbon dioxide) or highly flammable (pentane), this component also affects the burning properties and will be investigated. Examination of the influence of the macroscopic morphology, namely the cell size and thickness of cell walls, will contribute to the study. In order to provide comprehensive insight into the processes taking place during combustion, and to elucidate structure-property relationships, a set of foams with systematically varied properties was prepared. RPUF was obtained using water and pentane as a blowing agent. Besides RPUF, a flame-retarded RPUF and rigid polyisocyanurate-polyurethane foam were examined, since these foams are known for their higher stability from a thermodanymic point of view. As a flame retardant active in the gas phase, triethylphosphate was used. Using a multi-methodological approach, the complex interaction of fire phenomena was studied in detail. Cone calorimeter measurements provide insight into fire behaviour under forced-flaming conditions. They were carried out in an horizontal and a vertical orientation to account for the effects of melt flow and dripping. Sample-holders were equipped with glass windows to monitor the materials’ response to forced-flaming conditions with a video camera. Thermocouples were inserted into the specimens, giving information about the temperature gradient in the inside of the sample and the temperature of the pyrolysis zone during combustion. Changes in the morphology and thickness of the pyrolysis zone were examined using a hot-stage microscope, as well as SEM images of cross-sections of quenched foam specimens. The determination of the Oxygen Index and the use of thermogravimetry measurements rounded out the investigation. T2 - FRPM 2017, 16th European Meeting on Fire Retardant Polymeric Materials CY - Manchester, UK DA - 03.07.2017 KW - Foam KW - Polyurethane KW - Polyisocyanurate PY - 2017 AN - OPUS4-40950 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Günther, Martin A1 - Lorenzetti, Alessandra A1 - Schartel, Bernhard T1 - Investigating the fire phenomena of rigid polyurethane foams N2 - This work investigates the fire phenomena of rigid polyurethane foams (RPUF) in detail. Rigid polyurethane foams (RPUF) are widely used in industry and daily life because of their outstanding mechanical and thermal insulating properties. In case of fire, cellular polymers like RPUF behave differently from bulk materials, the reason for this is their low thermal inertia. The aim of this study is to investigate the fire phenomena of RPUF in detail. Characterized by simultaneous physical and chemical processes which interact, depend, and compete with each other, the combustion of RPUF is a highly complex occurrence. Therefore it is necessary to study all aspects in detail. The fire phenomena that were examined are gasification, liquefaction, charring and structural integrity as well as collapse. The comprehensive understanding of the processes taking place during combustion is the foundation of customized development of successful flame retardant approaches. Advanced cone calorimeter investigations provide insight into the fire behavior under forced flaming conditions. Thermocouples in the inside of specimens give information about the temperature gradient and temperature of the pyrolysis zone during combustion. Changes in the morphology and thickness of the pyrolysis zone were examined using a hot-stage microscope, as well as SEM images of cross-sections of quenched foam specimens. Furthermore, fire phenomena were characterized using LOI and thermal analysis. By using a multimethodological approach and systematically varied sets of Polyurethane and Polyisocyanurate foams, new insights into the burning of RPUF were won. The detailed knowledge of fire phenomena is essential for future development of tailored flame retardant strategies for RPUF. T2 - AMI Fire Retardants in Plastics 2019 CY - Pittsburgh, PA, USA DA - 02.04.2019 KW - Fire behavior KW - Rigid polyurethane foam PY - 2019 AN - OPUS4-47835 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Günther, Martin A1 - Lorenzetti, A. A1 - Schartel, Bernhard T1 - From Cells to Residues: Flame-Retarded Rigid Polyurethane Foams JF - Combustion Science and Technology N2 - Rigid polyurethane foams (RPUFs) exhibit short times to ignition as well as rapid flame spread and are therefore considered to be hazardous materials. This paper focuses on the fire phenomena of RPUFs, which were investigated through a multimethodological approach. Water-blown polyurethane (PUR) foams without flame retardants (FRs) as well as waterblown PUR foams containing triethyl phosphate as a gas phase-active FR were examined. The aim of this study is to clarify the influence of the FR on the fire phenomena during combustion of the foams. Additionally, materials’ densitieswere varied to range from 30 to 100 kg/m3. Thermophysical properties were studied bymeans of thermogravimetry; fire behavior and flammability were investigated via cone calorimeter and limiting Oxygen index, respectively. During the cone calorimeter test, the temperature development inside the burning specimens was monitored with thermocouples, and cross sections of quenched specimens were examined visually, giving insight into the morphological changes during combustion. The present paper delivers a comprehensive study, illuminating phenomena occurring during foam combustion and the influence of a FR active in the gas phase. The superior fire performance of flameretarded PUR foams was found to be based on flame inhibition, and on increased char yield leading to a more effective protective layer. It was proven that in-depth absorption of radiation is a significant factor for estimation of time to ignition. Cross sections investigated with the electron scanning microscope exhibited a pyrolysis front with an intact foam structure underneath. The measurement of temperature development inside burning specimens implied a shift of burning behavior towards that of non-cellular materials with rising foam density. KW - Polyurethane KW - Rigid foams KW - Fire behavior PY - 2020 DO - https://doi.org/10.1080/00102202.2019.1634060 SN - 0010-2202 SN - 1563-521X VL - 192 IS - 12 SP - 2209 EP - 2237 PB - Taylor & Francis AN - OPUS4-51483 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Quercetti, Thomas A1 - Feldkamp, Martin A1 - Gleim, Tobias A1 - Musolff, Andre A1 - Werner, Jan A1 - Wille, Frank T1 - Enhancement of the BAM Fire Test Stand for Testing a Large Transport Package for Radioactive Materials T2 - Proceedings of RAMTrans 2024 N2 - Packages for the transport of spent nuclear fuel are designed to endure severe accidents. To obtain approval, these transport packages must adhere to the specification-based criteria of the international transport regulations SSR-6 of the International Atomic Energy Agency (IAEA). To ensure compliance with these requirements, specific mechanical and thermal tests need to be addressed with respect to the package type. Typically, SSR-6 prescribes a mechanical test followed by a thermal fire test as part of different testing scenarios. To approve the latter test of the sequence, BAM performs calorimeter tests in advance with so-called fire reference packages for characterizing the actual fire and its impact on the package to be tested. Packages are designed with different geometry sizes depending on their purpose. For previous tests, the implemented test setups in the fire test stand were sufficiently dimensioned and could cover all requirements in this respect. However, to cover additional testing needs in the future, BAM is expanding the test setup for the purpose of testing significantly larger packages. In previous test setups one ring burner for propane surrounding the test specimen was sufficient. The limiting size in this configuration was the design height of the transport package to be tested. According to the thermal test of the IAEA-Regulations [1], a 30-minute fully engulfing 800°C pool fire or an equally severe fire, e.g., propane gas fire, must be applied to the transport package. Possible adjustments such as nozzle cross-section and propane mass flow can be adjusted to a certain extent. Further modifications, to cover significantly higher and larger packages all-around with a fully engulfing fire, must be accomplished with an additional, second burner ring. Both burner rings had the same dimensions and were mounted on top of each other at different heights to create a significantly larger volume of fire that completely engulfs the package including its impact limiter. To meet the IAEA regulatory boundary conditions, the enhanced fire test stand with the second burner ring is tested with a large fire reference package and will then be used for real-size transport packages after all parameters are successfully met. This fire reference package represents the external geometry of a generic transport cask for radioactive material and is equipped with numerous temperature sensors to record temperature curves at the interior wall surfaces. T2 - RAMTrans 2024 CY - London, United Kingdom DA - 14.05.2024 KW - Fire testing KW - Full-scale KW - Transport package PY - 2024 SP - 1 EP - 7 AN - OPUS4-60253 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin A1 - Kromm, Arne A1 - Kannengiesser, Thomas A1 - Dittmann, Florian A1 - Varfolomeev, Igor T1 - Influence of the weld geometry on the residual stress reduction using low transformation temperature welding consumables N2 - Low transformation temperature (LTT) welding consumables offer an innovative approach to increase the fatigue strength of welded high-strength steel structures. LTT welding consumables are characterized by a martensitic phase transformation near ambient temperature, which generates compressive residual stresses in the weld and heat affected zone (HAZ). The aim is to achieve a weld geometry, which generate high compressive residual stresses at the fatigue crack critical weld toe. Longitudinal stiffeners were gas metal arc welded using a conventional welding consumable; the base material was a high strength steel S700M. A chromium-nickel alloyed LTT consumable was deposit subsequently just on front sides of the stiffeners. Different welding parameters led to varying cross sections of the weld. The residual stresses were determined using X-ray diffraction (XRD) in the crack critical HAZ. When using only the conventional, the HAZ is characterized by high tensile residual stresses. The additional application of the LTT alloy leads to a significant reduction of the tensile residual stresses. Depending on the weld geometry, even compressive residual stresses can be observed at the weld toe T2 - ECRS 2024 CY - Prague, Czech Republic DA - 03.06.2024 KW - LTT (Low Transformation Temperature) KW - Residual stress reduction KW - Fatigue PY - 2024 AN - OPUS4-60305 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Fortes Martin, R. A1 - Thünemann, Andreas A1 - Stockmann, Jörg M. A1 - Radnik, Jörg A1 - Koetz, J. T1 - From Nanoparticle Heteroclusters to Filament Networks by Self-Assembly at the Water–Oil Interface of Reverse Microemulsions JF - Langmuir N2 - Surface self-assembly of spherical nanoparticles of sizes below 10 nm into hierarchical heterostructures is under arising development despite the inherent difficulties of obtaining complex ordering patterns on a larger scale. Due to template-mediated interactions between oil-dispersible superparamagnetic nanoparticles (MNPs) and polyethylenimine-stabilized gold nanoparticles (Au(PEI)NPs) at the water–oil interface of microemulsions, complex nanostructured films can be formed. Characterization of the reverse microemulsion phase by UV–vis absorption revealed the formation of heteroclusters from Winsor type II phases (WPII) using Aerosol-OT (AOT) as the surfactant. SAXS measurements verify the mechanism of initial nanoparticle clustering in defined dimensions. XPS suggested an influence of AOT at the MNP surface. Further, cryo-SEM and TEM visualization demonstrated the elongation of the reverse microemulsions into cylindrical, wormlike structures, which subsequently build up larger nanoparticle superstructure arrangements. Such WPII phases are thus proven to be a new form of soft template, mediating the self-assembly of different nanoparticles in hierarchical network-like filaments over a substrate during solvent evaporation. KW - Small-angle X-ray scattering KW - SAXS KW - Nanoparticle KW - Nano structure PY - 2021 DO - https://doi.org/10.1021/acs.langmuir.1c01348 VL - 37 IS - 29 SP - 8876 EP - 8885 PB - American Chemical Society AN - OPUS4-53034 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Munz, Martin T1 - Scanning force microscopy experiments probing micromechanical properties on polymer surfaces using harmonically modulated friction techniques - II. Investigations of heterogeneous systems JF - Macromolecular symposia N2 - Applying a high-frequency lateral vibration between tip and sample in a scanning force microscope (SFM), a harmonically modulated lateral (friction) force image can be obtained using lock-in techniques. Harmonically modulated lateral force microscopy (HM-LFM) offers several advantages compared with standard lateral force microscopy (LFM). After a brief investigation of the scan velocity dependence of LFM and HM-LFM, two samples were investigated. First, the surface of a poly(acrylonitrile-co-styrene)/polybutadiene blend (ABS) was used to demonstrate the ability of the new technique to decrease the stick effects of the SFM tip. Second, an interface between two chemically very similar polymers was prepared by melting polypropylene (PP) and poly(propene-block-ethene) (PP-block-PE) films on each other. After cutting, the surface roughness of this sample was very high. It is shown that only HM-LFM clearly resolves the local micromechanical properties without artefacts. KW - Scale PY - 1999 DO - https://doi.org/10.1002/masy.19991470125 SN - 1022-1360 SN - 0258-0322 SN - 1521-3900 VL - 147 SP - 259 EP - 267 PB - Wiley-VCH Verl. CY - Weinheim, Germany AN - OPUS4-6856 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Munz, Martin A1 - Sturm, Heinz A1 - Stark, Wolfgang T1 - Mechanical gradient interphase by interdiffusion and antiplasticisation effect - study of an epoxy/thermoplastic system JF - Polymer N2 - A stoichiometric amine–epoxy formulation was cured in the presence of a thermoplastic, namely poly(vinylpyrrolidone) (PVP). The epoxy system consisted of the resin diglycidyl ether of bisphenol A (DGEBA) and the aromatic curing agent 4,4'-diaminodiphenylsulfone (DDS). As shown for this system in a former study by Oyama et al. [Oyama HT, Lesko JJ, Wightman JP. J Polym Sci B 1997;35:331–46. [36]], preferential absorption of amine molecules by PVP can occur. In the present study, the focus is on the variations of local elastic properties within the epoxy interphase adjacent to the PVP layer. The curing was performed close to the glass transition temperature, Tα, of the PVP film, namely at 170 °C. Variations of the local amine concentration were tracked using energy-dispersive analysis of X-rays (EDX), by taking benefit of the sulfur contained in DDS. Using temperature-dependent dynamic mechanical analysis (DMA), a series of epoxy reference samples of different amine–epoxy concentration ratios, r, was investigated in order to work out the relationship between r and the epoxy storage modulus at room temperature. In the excess-epoxy regime, r<1, the modulus is observed to increase with departure from the stoichiometric ratio, r=1. Considering the respective suppression of the ß-transition, the observed characteristic can be explained by an antiplasticisation effect. Depth-sensing indentation (DSI) experiments across the epoxy/PVP interphase provided evidence for strong modulus variations. In consistency with the EDX and the DMA data, in the vicinity of the PVP layer the local epoxy modulus is increased. The total change of the epoxy Young's modulus is ~1.1 GPa. However, the total width of the modulus decay of ~175 µm is ~2.5 times larger than the one of the DDS concentration gradient. This finding is discussed in terms of additional spatial variations of the DGEBA concentration as well as long-range diffusion currents of DDS induced by the interdiffusion processes and their effect on the final network of crosslinks. KW - Interdiffusion KW - Interphase/interface KW - Polymer PY - 2005 DO - https://doi.org/10.1016/j.polymer.2005.06.098 SN - 0032-3861 SN - 1873-2291 VL - 46 IS - 21 SP - 9097 EP - 9112 PB - Springer CY - Berlin AN - OPUS4-10893 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Kalinka, Gerhard T1 - On the stiffness gradient at the interface between an amine-cured epoxy and a thermoplast T2 - 6. Workshop 'Rasterkraftmikroskopie in der Werkstoffwissenschaft' an der Uni Erlangen, Inst. für Werkstoffwissenschaften veranstaltet vom Arbeitskreis 'Rastersondenmikroskopie in der Werkstoffwissenschaft' im Fachausschuss Metallographie der Deutschen Gesellschaft für Materialkunde (DGM) T2 - 6. Workshop 'Rasterkraftmikroskopie in der Werkstoffwissenschaft' an der Uni Erlangen, Inst. für Werkstoffwissenschaften veranstaltet vom Arbeitskreis 'Rastersondenmikroskopie in der Werkstoffwissenschaft' im Fachausschuss Metallographie der Deutschen Gesellschaft für Materialkunde (DGM) CY - Erlangen, Germany DA - 2005-02-17 PY - 2005 AN - OPUS4-7137 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Stark, Wolfgang T1 - Mechanical gradient interphase within amine-cured epoxy by interdiffusion and antiplasticisation effect T2 - 9th International Conference on the Science and Technology of Adhesion and Ahesives (Adhesion'05) T2 - 9th International Conference on the Science and Technology of Adhesion and Ahesives (Adhesion'05) CY - Oxford, England DA - 2005-09-07 PY - 2005 AN - OPUS4-10937 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Chung, Jae Un A1 - Sturm, Heinz T1 - Stiffness variations across epoxy interphases T2 - 69. Jahrestagung der Deutschen Physikalischen Gesellschaft (DPG) T2 - 69. Jahrestagung der Deutschen Physikalischen Gesellschaft (DPG) CY - Berlin, Germany DA - 2005-03-04 PY - 2005 AN - OPUS4-7321 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Seeburg, Dominik A1 - Liu, Dongjing A1 - Radnik, Jörg A1 - Atia, Hanan A1 - Pohl, Marga-Martina A1 - Schneider, Matthias A1 - Martin, Andreas A1 - Wohlrab, Sebastian T1 - Structural changes of highly active Pd/MeOx (Me = Fe, Co, Ni) during catalytic methane combustion JF - Catalysts N2 - Fe2O3, Co3O4 and NiO nanoparticles were prepared via a citrate method and further functionalized with Pd by impregnation. The pure oxides as well as Pd/Fe2O3, Pd/Co3O4, and Pd/NiO (1, 5 and 10 wt % Pd) were employed for catalytic methane combustion under methane lean (1 vol %)/oxygen rich (18 vol %, balanced with nitrogen) conditions. Already, the pure metal oxides showed a high catalytic activity leading to complete conversion temperature of T100 ≤ 500 °C. H2-TPR (Temperature-programmed reduction) experiments revealed that Pd-functionalized metal oxides exhibited enhanced redox activity compared to the pure oxides leading to improved catalytic combustion activity at lower temperatures. At a loading of 1 wt % Pd, 1Pd/Co3O4 (T100 = 360 °C) outperforms 1Pd/Fe2O3 (T100 = 410 °C) as well as 1Pd/NiO (T100 = 380 °C). At a loading of 10 wt % Pd, T100 could only be slightly reduced in all cases. 1Pd/Co3O4 and 1Pd/NiO show reasonable stability over 70 h on stream at T100. XPS (X-ray photoelectron spectroscopy) and STEM (Scanning transmission electron microscopy) investigations revealed strong interactions between Pd and NiO as well as Co3O4, respectively, leading to dynamic transformations and reoxidation of Pd due to solid state reactions, which leads to the high long-term stability. KW - Methane total oxidation KW - Methane removal KW - Carbon dioxide KW - X-ray photoelectron spectroscopy PY - 2018 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-439412 DO - https://doi.org/10.3390/catal8020042 SN - 2073-4344 VL - 8 IS - 2 SP - Article 42, 1 EP - 13 PB - MDPI AN - OPUS4-43941 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Hübner, Martin A1 - Kromm, Arne A1 - Kannengießer, Thomas A1 - Dittmann, Florian A1 - Varfolomeev, Igor T1 - Eigenspannungsabbau mittels LTT – Schweißzusätzen unter Berücksichtigung der Nahtgeometrie N2 - Low Transformation Temperature (LTT)-Schweißzusätze sind ein innovativer Ansatz, um Eigenspannungen in Schweißnähten zu reduzieren. Dieser Vortrag behandelt neben den Einfluss der LTT-Schweißzusätze auch deren Naht-Ausführungen. Die unterschiedlichen LTT-Nahtgeometrien haben einen signifikanten Einfluss auf den Eigenspannungsabbau in der Schweißnaht und der Wärmeeinflusszone (WEZ). T2 - SFB 1120 Summer School CY - Steinfeld, Germany DA - 11.06.2024 KW - LTT (Low Transformation Temperature) KW - Eigenspannungen KW - Ermüdungsfestigkeit KW - Aufmischung PY - 2024 AN - OPUS4-60306 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Dutschke, Andreas A1 - Lohrer, Christian A1 - Seeger, Stefan A1 - Kurth, Lutz A1 - Schmidt, Martin A1 - Kaiser, Michael A1 - Stattaus, Kim A1 - Panne, Ulrich T1 - Determination of reaction products during a large firework display in Germany T2 - 11th international symposium on fireworks T2 - 11th International symposium on fireworks CY - Puerto Vallarta, México DA - 2009-04-20 KW - Firework display KW - Reaction products KW - Particles KW - Sound pressure PY - 2009 SN - 978-0-9734123-8-3 SP - 50 EP - 63 AN - OPUS4-19383 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Lozano-Martín, D. A1 - Moreau, A. A1 - Vega-Maza, D. A1 - Chamorro, C. R. A1 - Tuma, Dirk A1 - Martín, M. C. A1 - Akubue, G. U. T1 - High-pressure density data of binary (carbon dioxide + oxygen) mixtures for the development of equation-of-state models N2 - On the way to a low carbon economy mixtures containing carbon dioxide become increasingly important. Processing of such gas mixtures requires reliable thermodynamic models that can accurately describe the state of matter over an extended range. Mixtures with oxygen for example, are frequently encountered in carbon capture and storage (CCS) processes. This work reports new experimental (p, rho, T) data at T = (250 to 375 K) and up to a maximum pressure pmax = 20 MPa for five binary (CO2 + O2) mixtures which cover the entire composition range. T2 - 31st European Symposium on Applied Thermodynamics CY - Online meeting DA - 05.07.2021 KW - Binary mixtures CO2 + O2 KW - Density measurements KW - Equations of state PY - 2021 AN - OPUS4-53990 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Feldkamp, Martin A1 - Gleim, Tobias A1 - Quercetti, Thomas A1 - Wille, Frank T1 - Combustion Chamber Design for Encapsulated Wood-Component Testing N2 - eavy-weight packages for the safe transport of radioactive material are equippedwith impact limiters often built ofwood-filled steel sheet structures to fulfil the requirements of the International Atomic Energy Agency (IAEA) regulations. The requirements definemechanical tests followed by a thermal test, including criteria ensuring the package design’s ability to withstand severe accidents and provide a high level of technical safety. Impact limiters are a package component mainly designed for the packages to withstand severe mechanical accident scenarios. In drop tests the impact limiters absorb the kinetic energy during impact of the package. The package must then - with its pre-damaged impact limiters - endure a thermal test defined precisely in the IAEA regulations as a 30-min fully engulfing 800 °C-fire. After the fire, a wood-filled impact limiter may continue to release thermal energy from an ongoing combustion process, defining relevant package temperatures. The energy flow from a possible burning impact limiter to the package is important for the safety evaluation of transport packages. To investigate the combustion behaviour of densely packed layers of spruce wood, encapsulated in pre-damaged cylindrical metal enclosures, a test set-up has been realised. The set-up consists of a combustion chamber to perform these tests under defined boundary conditions. The temperature development of the test specimens will be observed fromoutside with a thermographic imager, with HD-Cameras, and the mass loss will be measured during the entire test. Airflow conditions in the combustion chamber are analysed using Computational Fluid Dynamics (CFD) calculations in OpenFOAM. The planned combustion test setup is described. T2 - Wood & Fire Safety 2024 CY - Štrbské Pleso, Slovakia DA - 12.05.2024 KW - IAEA KW - Combustion Chamber KW - Smouldering KW - Wood PY - 2024 AN - OPUS4-60227 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Krause, U. T1 - The calculation of the heat release rate by oxygen consumption in a controlled-atmosphere cone calorimeter JF - Fire and materials N2 - The standard cone calorimeter according to ASTM E 1354 and ISO 5660 enables reaction-to-fire tests to be performed in ambient atmospheric conditions. A controlled-atmosphere chamber modifies the standard apparatus in a way that allows tests to be performed in nonambient conditions as well. The enclosed chamber is placed underneath the standard exhaust hood and does not have a closed connection to the hood. With this open arrangement, the exhaust gases are diluted by excess air drawn in from the laboratory surroundings. Heat-induced changes in the consequential dilution ratio affect the calculation of fire quantities and, when neglected, lead to deviations of up to 30% in heat release rate. The paper introduces a test protocol and equations to calculate the heat release rate taking dilution effects into account. A mathematical correction is shown that compensates for the dilution effects while avoiding extensive mechanical changes in the equipment. KW - Controlled-atmosphere cone calorimeter KW - Heat release rate KW - Oxygen consumption KW - Cone calorimeter KW - Vitiation and ventilation control KW - Excess air PY - 2014 DO - https://doi.org/10.1002/fam.2175 SN - 0308-0501 SN - 1099-1018 VL - 38 IS - 2 SP - 204 EP - 226 PB - Heyden CY - London AN - OPUS4-30317 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dippong, Martin A1 - Flemig, Sabine A1 - Hoffmann, Katrin A1 - Kunte, Hans-Jörg A1 - Schenk, J. A. A1 - Resch-Genger, Ute A1 - Schneider, Rudolf A1 - Kuhne, Maren T1 - Flow Cytometry (FACS) for characterization and sorting of murine B cells to advance development of monoclonal antibodies T2 - Trends in Diagnostics T2 - Trends in Diagnostics CY - Tübingen, Germany DA - 2013-10-07 PY - 2013 AN - OPUS4-29241 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Dippong, Martin A1 - Gürnth-Marschner, C. A1 - Kirschbaum, M. A1 - Duschl, C. A1 - Schneider, Rudolf A1 - Kuhne, Maren A1 - Hoffmann, Katrin T1 - Fraunhofer Life Science Day N2 - Their high affinity, selectivity and specificity make monoclonal antibodies (mAbs) very important tools in research, diagnostics and therapy. The production of mAbs is routinely performed by hybridoma technique. Hybridomas are generated by fusing antibody-producing B cells with indefinitely proliferating myeloma cells. Both, cell fusion and the indispensable identification and isolation of the desired antibody-producing hybridoma clone is still far from being trivial. We describe a novel method that should help to optimize the cell fusion, and the screening for antibody-secreting hapten-specific hybridoma cells by using fluorescence activated cell sorting and single-cell fusion. Hybridoma cells specific for a hapten were incubated with a hapten-peroxidase conjugate (hapten-HRP), which was subsequently incubated with a fluorophore-labeled polyclonal anti-peroxidase antibody (anti-HRP-Alexa Fluor® 488). To characterize the expression of membrane-bound immunoglobulin G (IgG) a fluorophore-labeled anti-mouse IgG antibody (anti-IgG-Alexa Fluor® 647) was used. Successful staining was verified by confocal laser scanning microscopy (CLSM). We show that it is possible to specifically label hapten-specific hybridoma cells. It should also be possible to use this labelling approach for the isolation of hapten-specific B cells from the spleen and use these cells for single-cell fusion. Parallelized cell fusion chips were developed to increase fusion efficiencies. T2 - Fraunhofer Life Science Day 2015 CY - Leipzig, Germany DA - 03.07.2015 KW - Single-cell fusion KW - Hybridoma KW - Monoclonal antibodies PY - 2015 AN - OPUS4-37872 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Krause, Ulrich A1 - Deuerler, Frederike T1 - Ventilation vs. Vitiation Effects on the CO Pruduktion in a Controlled-atmosphere Cone Calorimeter T2 - IAFSS International Symposium on Fire Safety Science T2 - IAFSS International Symposium on Fire Safety Science CY - Christchurch, New Zealand DA - 2014-02-10 PY - 2014 AN - OPUS4-30291 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja A1 - Antonatus, E. A1 - Krause, U. A1 - Duerler, F. T1 - Use and benefit of a controlled-atmosphere cone calorimeter T2 - Fire and materials 2013 - 13th International conference and exhibition (Proceedings) N2 - A controlled-atmosphere cone calorimeter that is built by modifying the Standard apparatus with the addition of a controlled-atmosphere chamber offers a time- and cost-saving approach for reaction-to-fire testing in vitiation- and ventilation-controlled atmospheres. Due to the design of the added enclosure no mechanical changes on cone calorimeter’s Standard ductwork are required. This offers some advantages but also important limitations. The design has an open connection between the outlet of the added enclosure and the cone calorimeter’s exhaust hood. Therefore, sufficient ambient air from the laboratory surroundings is drawn into the System to introduce effects which have the potential to affect test results significantly. A procedure which is is suitable to consider physical effects of the ambient air on the calculation of the heat release rate is presented as well as initial results of an application towards toxic potency assessment. Signs for Chemical effects of the ambient air such as post reactions are shown but subject of an ongoing work. T2 - Fire and materials 2013 - 13th International conference and exhibition CY - San Francisco, CA, USA DA - 28.01.2013 KW - Controlled-atmosphere cone calorimeter KW - Heat release rate KW - Oxygen consumption KW - Smoke toxicity PY - 2013 SP - 273 EP - 286 PB - Interscience Communications CY - London, UK AN - OPUS4-27707 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Werrel, Martin A1 - Deubel, Jan A1 - Krüger, Simone A1 - Hofmann-Böllinghaus, Anja T1 - Oxygen-reduced Cone Calorimeter - Characteristic effects on the calculation of the heat release rate T2 - ISO-Meeting T2 - ISO-Meeting CY - Brussels, Belgium DA - 2011-11-02 PY - 2011 AN - OPUS4-24710 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Bonse, Jörn T1 - Scanning force microscopic investigations of the femtosecond pulse laser ablation of indium phosphide in air T2 - Tagung "Microtechnologies for the New Millennium 2003", SPIE conference no.5118 "Nanotechnology" T2 - Tagung "Microtechnologies for the New Millennium 2003", SPIE conference no.5118 "Nanotechnology" CY - San Agustín (Gran Canaria), Spain DA - 2003-05-19 PY - 2003 AN - OPUS4-2918 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bonse, Jörn A1 - Munz, Martin A1 - Sturm, Heinz T1 - Scanning force microscopic investigations of the femtosecond laser pulse irradiation of indium phosphide in air JF - IEEE transactions on nanotechnology N2 - Laser ablation of single-crystalline indium phosphide (InP) was performed in air by means of linearly polarized Ti : sapphire femtosecond pulses (800 nm, 130 fs, 10 Hz). As a result of the irradiation with a variable number of laser pulses per spot (N /spl les/ 5), several morphological changes (crater formation, rim formation, ripple structures, and cones) were observed. These effects were explored using force modulation microscopy (FMM), a technique based on scanning force microscopy, allowing the simultaneous imaging of both topography and local stiffness at a high lateral resolution. The first laser pulse induces the formation of a protruding rim (height < 20 nm, width /spl ap/ 300 nm) bordering the ablated crater. A Fourier analysis of the multipulse generated topographies reveals the formation of wavelength-sized periodic ripples (modulation depth < 100 nm) with an orientation perpendicular to that of the electric field vector of the laser radiation. Besides these morphological alterations, material modifications were also observed in the irradiated regions by means of the FMM technique. Within the ablated craters, local stiffness variations were found revealing an inhomogeneous material composition/structure as a consequence of the femtosecond pulse laser treatment. KW - Laser materials-processing applications KW - Laser radiation effects KW - Microscopy KW - Semiconductor materials KW - Ultrafast optics PY - 2004 DO - https://doi.org/10.1109/TNANO.2004.828574 SN - 1536-125X SN - 1941-0085 VL - 3 IS - 3 SP - 358 EP - 367 PB - Institute of Electrical and Electronics Engineers CY - New York, NY AN - OPUS4-4067 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Cappella, Brunero A1 - Sturm, Heinz A1 - Geuss, Markus A1 - Schulz, Eckhard T1 - Materials contrasts and nanolithography techniques in scanning force microscopy (SFM) and their application to polymers and polymer composites T2 - Filler-reinforced elastomers scanning force microscopy N2 - Beyond measuring the topography of surfaces, scanning force microscopy (SFM) has proved to be valuable both for mapping of various materials properties and for modifying surfaces via lithography techniques. Thus, SFM has gained relevance as a surface analysis technique as well as a tool for nanoscale engineering purposes. Different kinds of tip-sample interactions are exploitable, e.g. mechanical, thermal and electrical ones. Owing to its versatility, SFM has found plenty of applications in polymer science. Among others, the examples reported on in this review article encompass issues related to commodity polymers, various polymer-based composites, polymer blends, or ferroelectric polymers. For instance, stiffness imaging is elucidated as a technique for detecting interphases occurring in composites with inorganic fillers. The described applications are mainly related to mechanical and electrical tip-sample interactions. The respective fundamentals are outlined as well as some aspects of the measurement of materials contrasts. The presented techniques of nano-scale modification are a dynamical sort of plowing lithography and electrical poling, both performed by means of SFM-probes. KW - Local electrical-properties KW - Probing micromechanical properties KW - Spreading resistance microscopy KW - Modulated friction techniques KW - Nanometer-scale modification KW - Ferroelectric domain-walls KW - Interfacial shear-strength KW - Self-assembled monolayers KW - Maxwell-stress microscopy KW - Solid-liquid interfaces KW - Contact mechanics KW - Electrical properties KW - Interface/interphase KW - Nanolithography KW - Polymer-matrix composites (PMC) scanning/atomic force KW - Microscopy (SFM/AFM) thermal diffusivity PY - 2003 SN - 3-540-00530-7 DO - https://doi.org/10.1007/b11055 SN - 0065-3195 SN - 1436-5030 N1 - Serientitel: Advances in polymer science – Series title: Advances in polymer science IS - 164 SP - 87 EP - 210 PB - Springer CY - Berlin AN - OPUS4-2892 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Hernández-Gómez, R. A1 - Tuma, Dirk A1 - Lozano-Martín, D. A1 - Chamorro, C. R. T1 - Accurate experimental (p, rho, T) data of natural gas mixtures for the assessment of reference equations of state when dealing with hydrogen-enriched natural gas JF - International Journal of Hydrogen Energy N2 - The GERG-2008 equation of state is the approved ISO standard (ISO 20765-2) for the calculation of thermophysical properties of natural gas mixtures. The composition of natural gas can vary considerably due to the diversity of origin. Further diversification was generated by adding hydrogen, biogas, or other non-conventional energy gases. In this work, high-precision experimental (p, rho, T) data for two gravimetrically prepared synthetic natural gas mixtures are reported. One mixture resembled a conventional natural gas of 11 components (11 M) with a nominal mixture composition (amount-of-substance fraction) of 0.8845 for methane as the matrix compound with the other compounds being 0.005 for oxygen, 0.04 for nitrogen, 0.015 for carbon dioxide, 0.04 for ethane, 0.01 for propane, 0.002 each for n- and isobutane, and ultimately 0.0005 each for isopentane, n-pentane, and nhexane. The other mixture was a 13-component hydrogen-enriched natural gas with a low calorific value featuring a nominal composition of 0.7885 for methane, 0.03 for hydrogen, 0.005 for helium, 0.12 for nitrogen, 0.04 for carbon dioxide, 0.0075 for ethane, 0.003 for propane, 0.002 each for n- and isobutane, and 0.0005 each for neopentane, isopentane, npentane, and n-hexane. Density measurements were performed in an isothermal operational mode at temperatures between 260 and 350 K and at pressures up to 20 MPa by using a single-sinker densimeter with magnetic suspension coupling. The data were compared with the corresponding densities calculated from both GERG-2008 and AGA8-DC92 equations of state to test their performance on real mixtures. The average absolute Deviation from GERG-2008 (AGA8-DC92) is 0.027% (0.078%) for 11 M and 0.095% (0.062%) for the 13-component H2-enriched mixture, respectively. The corresponding maximum relative Deviation from GERG-2008 (AGA8-DC92) amounts to 0.095% (0.127%) for 11 M and 0.291% (0.193%) for the H2-enriched mixture. KW - Hydrogen-enriched natural gas KW - Gravimetric preparation KW - Volumetric data KW - GERG-2008 equation of state PY - 2018 DO - https://doi.org/10.1016/j.ijhydene.2018.10.027 SN - 0360-3199 SN - 1879-3487 VL - 43 IS - 49 SP - 21983 EP - 21998 PB - Elsevier CY - Amsterdam AN - OPUS4-46686 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Schulz, Eckhard A1 - Sturm, Heinz T1 - Reliability of polymer materials - the nanoscopic view on interphases T2 - Kick-off Meeting T2 - Kick-off Meeting zu einem gemeinsamen DAAD-Projekt mit der Universidad Pais Vasco (UVP), Dept. of Chemical and Environmental Engineering, Industrial Engineering School (EITI), Materials and Technologies Group CY - San Sebastián, Spain DA - 2002-08-08 PY - 2002 SP - 1(?) EP - 12(?) AN - OPUS4-1832 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Reliability of polymer based composites - interfaces and interphases from the nanomechanical point of view T2 - Proceedings of the 15th International Congress on Electron Microscopy T2 - 15th International Congress on Electron Microscopy (ICEM) CY - Durban, South Africa DA - 2002-09-01 PY - 2002 SN - 0-620-29294-6 SP - 619 EP - 620 PB - Microscopy Society of Southern Africa CY - Onderstepoort AN - OPUS4-1833 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Munz, Martin A1 - Chung, Jae Un A1 - Eltanany, Gehan A1 - Sturm, Heinz A1 - Schulz, Eckhard ED - Degischer, H.-P. T1 - Interphasial stiffness gradients in polymer materials T2 - Verbundwerkstoffe : 14. Symposium Verbundwerkstoffe und Werkstoffverbunde T2 - Symposium Verbundwerkstoffe und Werkstoffverbunde CY - Wien, Österreich DA - 2003-07-02 PY - 2003 SN - 3-527-30762-1 PB - Wiley-VCH CY - Weinheim AN - OPUS4-2525 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Zuverlässigkeit von Polymer-Werkstoffen - Interphasen nanoskopisch betrachtet T2 - 3. Workshop "Rasterkraftmikroskopie in der Werkstoffwissenschaft" T2 - 3. Workshop "Rasterkraftmikroskopie in der Werkstoffwissenschaft" CY - Berlin, BAM, Deutschland DA - 2002-02-28 PY - 2002 SP - 14 AN - OPUS4-1831 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Bonse, Jörn A1 - Munz, Martin A1 - Sturm, Heinz T1 - Structure formation on the surface of indium phosphide irradiated by femtosecond laser pulses JF - Journal of applied physics N2 - Laser-induced periodic surface structures (LIPSS; ripples) with different spatial characteristics have been observed after irradiation of single-crystalline indium phosphide (c-InP) with multiple linearly polarized femtosecond pulses (130 fs, 800 nm) in air. With an increasing number of pulses per spot, N, up to 100, a characteristic evolution of two different types of ripples has been observed, i.e., (i) the growth of a grating perpendicular to the polarization vector consisting of nearly wavelength-sized periodic lines and (ii), in a specific pulse number regime (N = 5–30), the additional formation of equally oriented ripples with a spatial period close to half of the laser wavelength. For pulse numbers higher than 50, the formation of micrometer-spaced grooves has been found, which are oriented perpendicular to the ripples. These topographical surface alterations are discussed in the frame of existing LIPSS theories. KW - Femtosecond laser irradiation KW - Indium phosphide KW - Microstructure KW - Laser induced periodic surface structures KW - LIPSS KW - SEM PY - 2005 DO - https://doi.org/10.1063/1.1827919 SN - 0021-8979 SN - 1089-7550 VL - 97 SP - 013538-1 EP - 013538-9 PB - American Institute of Physics CY - Melville, NY AN - OPUS4-5992 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Chung, Jae Un A1 - Sturm, Heinz T1 - The epoxy-interphase at copper microelectrodes as investigated by scanning force microscopy T2 - 7th European Adhesion Conference "EURADH2004", veranstaltet von der DECHEMA T2 - 7th European Adhesion Conference "EURADH2004", veranstaltet von der DECHEMA CY - Freiburg, Germany DA - 2004-09-06 PY - 2004 AN - OPUS4-4159 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Bonse, Jörn A1 - Munz, Martin A1 - Sturm, Heinz ED - Vajtai, R. T1 - Scanning force microscopic investigations of the femtosecond pulse laser ablation of indium phosphide in air T2 - Nanotechnology 2003 N2 - Laser ablation of single-crystalline indium phosphide (InP) was performed in air by means of linearly polarized Ti:sapphire femtosecond-pulses (800 nm, 130 fs, 10 Hz). As a result of the first laser pulses, several morphological changes (crater formation, rim formation, ripple structures and cones) were observed. These effects were explored using force modulation microscopy (FMM), a technique based on scanning force microscopy (SFM), allowing the simultaneous imaging of both topography and local stiffness at a high lateral resolution. The first laser pulse induces the formation of a protruding rim (height <20 nm, width ~300 nm) bordering the ablated crater. A Fourier-analysis of the multi-pulse generated topographies reveals the formation of wavelength-sized periodic ripples (modulation depth <100 nm) with an orientation perpendicular to that of the electric field vector of the laser radiation. Besides these morphological alterations, also material modifications were observed in the irradiated regions by means of the FFM technique. Within the ablated craters, local stiffness variations were found revealing an inhomogeneous material composition/structure as a consequence of the femtosecond pulse laser treatment. T2 - Nanotechnology Conference 2003 CY - Maspalomas, Gran Canaria, Spain DA - 2003-05-19 KW - Femtosecond laser irradiation KW - Microstructure KW - Indium phosphide KW - Scanning/atomic force microscopy (SFM/AFM) KW - Stiffness KW - Laser induced periodic surface structures (LIPSS) PY - 2003 UR - http://cat.inist.fr/?aModele=afficheN&cpsidt=15329222 SN - 0-8194-4978-4 N1 - Serientitel: SPIE proceedings series – Series title: SPIE proceedings series IS - 5118 SP - 221 EP - 234 PB - SPIE, the International Society for Optical Engineering CY - Bellingham, Wash. AN - OPUS4-2865 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Chung, Jae Un A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Influence of copper electrode on xring of epoxy-anime systems T2 - STM'03, Abstractband TU-POS-11 T2 - STM'03, Abstractband TU-POS-11 CY - Eindhoven, Netherlands DA - 2003-07-21 PY - 2003 AN - OPUS4-4651 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - The force-modulation mode of a SFM as a method for studying local mechanical properties of interphases T2 - IPCM '97 T2 - IPCM '97 CY - Eger, Hungary DA - 1997-09-01 PY - 1997 AN - OPUS4-6435 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - The normal force modulation as a method for studying the interphase of fibre reinforced polymers T2 - STM '97 T2 - STM '97 CY - Hamburg, Germany DA - 1997-07-20 PY - 1997 AN - OPUS4-6434 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - Messung lokaler mechanischer Eigenschaften heterogener Polymerproben T2 - Topo-Metrix Workshop T2 - Topo-Metrix Workshop CY - Dresden, Germany DA - 1997-03-13 PY - 1997 AN - OPUS4-6430 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Schulz, Eckhard A1 - Sturm, Heinz T1 - Dynamische Rasterkraftmikroskopie T2 - Graduiertenkolleg: Polymerwerkstoffe T2 - Graduiertenkolleg: Polymerwerkstoffe CY - Berlin, Germany DA - 1997-06-20 PY - 1997 AN - OPUS4-6432 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Schulz, Eckhard A1 - Sturm, Heinz T1 - Detektion und Charakterisierung von Steifigkeitsgradienten im Bereich der Interphase verstärkter Polymere T2 - Berliner Polymerentage 2000 T2 - Berliner Polymerentage 2000 CY - Berlin, Germany DA - 2000-10-10 PY - 2000 AN - OPUS4-6509 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Arbeitsprogramm des Teilprojektes A1 des Sfb 605 - Begutachtung des Sfb605 durch die DFG T2 - Sfb605 "Elementarreibereignisse" T2 - Sfb605 "Elementarreibereignisse" CY - Berlin, Germany DA - 2001-05-07 PY - 2001 AN - OPUS4-6519 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Arbeitsprogramm des Teilprojektes B5 des Sfb 605 - Begutachtung des Sfb 605 durch die DFG T2 - Sfb 605 "Elementarreibereignisse" T2 - Sfb 605 "Elementarreibereignisse" CY - Berlin, Germany DA - 2001-05-07 PY - 2001 AN - OPUS4-6520 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - RKM in der Werkstoffwissenschaft T2 - AK Rasterkraftmikroskopie in der Werkstoffwissenschaft der DGM T2 - AK Rasterkraftmikroskopie in der Werkstoffwissenschaft der DGM CY - Berlin, Germany DA - 2002-02-28 PY - 2002 AN - OPUS4-6532 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - The Normal Force Modulation as a method for Studying the Interphase of Fibre Reinforced Polymer T2 - 24th Intern. TopoMetrix-Workshop: Aktuelle Entwicklungen in der Nanotechnologie und Rastersondenmikroskopie, Humboldt-Universität T2 - 24th Intern. TopoMetrix-Workshop: Aktuelle Entwicklungen in der Nanotechnologie und Rastersondenmikroskopie, Humboldt-Universität CY - Berlin, Germany DA - 1998-03-12 PY - 1998 AN - OPUS4-6457 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Schulz, Eckhard A1 - Sturm, Heinz T1 - Harmonically modulated friction measurements in Scanning Force Microscopy (SFM) - A valuable tool for testing surface properties of micro- and nanomechanical systems T2 - Workshop Nanotribology: Critical Assessment and Research Needs - National Istitute of Standards and Technology (NIST) T2 - Workshop Nanotribology: Critical Assessment and Research Needs - National Istitute of Standards and Technology (NIST) CY - Gaithersburg, MD, USA DA - 2000-03-13 PY - 2000 AN - OPUS4-6511 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - On the nanomechanical characterisation of the interphase of reinforced polymers T2 - 2. DGM-Workshop - Rasterkraftmikroskopie in der Werkstoffwissenschaft, Fhl Schicht- und Oberflächentechnik T2 - 2. DGM-Workshop - Rasterkraftmikroskopie in der Werkstoffwissenschaft, Fhl Schicht- und Oberflächentechnik CY - Braunschweig, Germany DA - 2001-02-22 PY - 2001 AN - OPUS4-6522 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - On the nanomechanical characterisation of the interphase of reinforced polymers T2 - Workshop Rastersondenmikroskopie in Forschung und Industrie T2 - Workshop Rastersondenmikroskopie in Forschung und Industrie CY - Berlin, Germany DA - 2001-03-08 PY - 2001 AN - OPUS4-6523 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - The nanoscopic view on polymer based composites T2 - Scanning Probe Microscopy on Organic Materials X T2 - Scanning Probe Microscopy on Organic Materials X CY - Kaiserslautern, Germany DA - 2001-10-08 PY - 2001 AN - OPUS4-6524 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Bericht des Teilprojektes A1 des Sfb 605 - Begutachtung des Sfb 605 durch die DFG T2 - Sfb 605 "Elemantarreibereignisse" T2 - Sfb 605 "Elemantarreibereignisse" CY - Berlin, Germany DA - 2001-05-07 PY - 2001 AN - OPUS4-6521 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard A1 - Hinrichsen, G. T1 - Messung lokaler mechanischer Eigenschaften von Faser-Verbunden mit dem Rasterkraftmikroskop T2 - Diskussionstagung: Raster-Sonden-Mikroskopien und organische Materialien V T2 - Diskussionstagung: Raster-Sonden-Mikroskopien und organische Materialien V CY - Münster, Germany DA - 1996-10-07 PY - 1996 AN - OPUS4-6402 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Wegvermittelte Normalkraftmodulation mit lokal angepasster Modulationsamplitude T2 - Digital Instruments User Meeting an der LMU T2 - Digital Instruments User Meeting an der LMU CY - Munich, Germany DA - 1998-03-04 PY - 1998 AN - OPUS4-6450 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - CONF A1 - Munz, Martin A1 - Sturm, Heinz A1 - Schulz, Eckhard T1 - Zur nanoskopischen Charakterisierung der Interphase verstärkter Polymere T2 - Berliner Polymerentage 2000 T2 - Berliner Polymerentage 2000 CY - Berlin, Germany DA - 2000-10-09 PY - 2000 AN - OPUS4-6508 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - López de Ipina, J.-M. A1 - Arevalillo, A. A1 - Martín, A. A1 - Caillard, B. A1 - Marcoulaki, E. A1 - Aguerre- Charol, O. A1 - van Duuren-Stuurman, B. A1 - Hodoroaba, Vasile-Dan A1 - Viitanen, A.-K. A1 - Witters, H. A1 - Vercauteren, S. A1 - Persson, K. A1 - Bard, D. A1 - Evans, G. A1 - Jensen, K.A. A1 - Himly, M. A1 - Scalbi, S. A1 - Papin, A. A1 - Le Bihan, O. A1 - Kanerva, T. A1 - Tirez, K. A1 - Frijns, E. A1 - Niga, P. A1 - Eleftheriadis, K. A1 - Travlos, A. A1 - Geppert, M. A1 - Himly, M. A1 - Radnik, Jörg A1 - Kuchenbecker, Petra A1 - Resch-Genger, Ute A1 - Fraboulet, I. A1 - Bressot, C. A1 - Rissler, J. A1 - Gaucher, R. A1 - Binotto, G. A1 - Krietsch, Arne A1 - Braun, A. A1 - Abenet, S. A1 - Catalan, J. A1 - Verstraelen, S. A1 - Manier, N. A1 - Manzo, S. A1 - Fransman, S. A1 - Queron, J. A1 - Charpentier, D. A1 - Taxell, D. A1 - Säämänen, A. A1 - Brignon, J.-M. A1 - Jovanovic, A. A1 - Bisson, M A1 - Neofytou, P. T1 - EC4Safenano - Catalogue of Services N2 - The publicly available document encapsulates the first version of the Catalogue of Services of the future EC4Safenano Centre (CoS 2019). The CoS 2019 is structured in 12 Service Categories and 27 Service Topics, for each of the 12 categories considered. This architecture configures a 12 x 27 matrix that allows ordering the potential EC4Safenano offer in 324 types of services/groups of services. Each type of service/group of services is described, in a simple and friendly way, by means of a specific service sheet: the EC4Safenano - Service Data Sheet (EC4-SDS). These EC4-SDSs allow structuring and summarizing the information of each service, providing the customer with a concise view of characteristics of the service and also the contact details with the service provider. The CoS 2019 deploys a map of services consisting of a set of 100 EC4-SDSs, covering 7 of the 12 Service Categories and 17 of the 27 Service Topics. The harmonization of services is visualized as a future necessary step in EC4Safenano, in order to strengthen the offer and provide added value to customers with a growing offer of harmonized services in future versions of the CoS. The information contained in this document is structured in 3 main sections, as follows: • Catalogue structure. This section describes in short the main characteristics of the CoS 2019. • Catalogue content. This section represents the core part of the document and encapsulates the set of 100 SDSs displaying the offer proposed by the CoS 2019. • Online Catalogue. This section describes the resources implemented by EC4Safenano to facilitate the on-line consultation of the CoS 2019 by customers and other interested parties. KW - Nano-safety KW - Analytical services KW - Nanomaterials KW - Catalogue of services KW - EC4SafeNano KW - European Centre PY - 2021 UR - https://ec4safenano.eu-vri.eu/Public/Guidance SP - 1 EP - 72 PB - EU-VRi – European Virtual Institute for Integrated Risk Management CY - Stuttgart, Germany AN - OPUS4-52943 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Tuma, Dirk A1 - Moreau, A. A1 - Polishuk, I. A1 - Segovia, J. J. A1 - Vega-Maza, D. A1 - Martín, M. C. T1 - Measurements and predictions of densities and viscosities in CO2 + hydrocarbon mixtures at high pressures and temperatures: CO2 + n-pentane and CO2 + n-hexane blends JF - Journal of Molecular Liquids N2 - This work reports new experimental data on densities and viscosities of (CO2 + n-pentane) and (CO2 + n-hexane) mixtures at high pressures and temperatures. The densities were measured by a vibrating-tube densimeter with an expanded uncertainty (k = 2) smaller than 1.8 kg/m3 at six isotherms (from 273.15 K to 373.15 K), twelve pressures starting at 5 MPa up to 100 MPa, and at six CO2 molar compositions (from 0 to 0.6). The viscosities were measured by a vibrating-wire viscometer with the corresponding relative expanded uncertainty (k = 2) smaller than 0.016 at five isotherms (from 273.15 K to 373.15 K), twelve pressures (from 5 MPa up to 100 MPa), and at two CO2 molar compositions (0.1 and 0.3). The densities were fitted by the semiempirical Tammann-Tait equation for density data and the Vogel-Fulcher-Tammann (VFT) equation for viscosity data, respectively. The Groupe Européen de Recherches Gazières (GERG-2008) equation of state was also applied for modelling the densities. Over-all robustness and reliability of the Perturbed-Chain Statistical Association Fluid Theory (PC-SAFT) and its critical point-based modification (CP-PC-SAFT) were examined. Accuracies of the Modified Yarranton-Satyro (MYS) coupled with CP-PC-SAFT and the NIST Reference Fluid Thermodynamic and Transport Properties Database (REFPROP 10) in predicting the viscosities were evaluated. KW - CO2 + n-alkanes KW - thermophysical properties KW - Perturbed-Chain Statistical Association Fluid Theory PY - 2022 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-555728 DO - https://doi.org/10.1016/j.molliq.2022.119518 SN - 0167-7322 VL - 360 SP - 1 EP - 15 PB - Elsevier CY - Amsterdam AN - OPUS4-55572 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Ha, Q. L. M. A1 - Armbruster, U. A1 - Atia, Hanan A1 - Lund, H. A1 - Agostini, G. A1 - Radnik, Jörg A1 - Vuong, H. T. A1 - Martin, A. T1 - Development of active and stable low nickel content catalysts for dry reforming of methane JF - Catalysts N2 - Methane dry reforming (DRM) was investigated over highly active Ni catalysts with low metal content (2.5wt%) supported on Mg-Al mixed oxide. The aim was to minimize carbon Deposition and metal sites agglomeration on the working catalyst which are known to cause catalyst deactivation. The solids were characterized using N2 adsorption, X-ray diffraction, temperature-programmed reduction, X-ray photoelectron spectroscopy, and UV-Vis diffuse reflectance spectroscopy. The results showed that MgO-Al2O3 solid solution phases are obtained when calcining Mg-Al hydrotalcite precursor in the temperature range of 550–800 °C. Such phases contribute to the high activity of catalysts with low Ni content even at low temperature (500 °C). Modifying the catalyst preparation with citric acid significantly slows the coking rate and reduces the size of large octahedrally coordinated NiO-like domains, which may easily agglomerate on the surface during DRM. The most effective Ni catalyst shows a stable DRM course over 60 h at high weight hourly space velocity with very low coke deposition. This is a promising result for considering such catalyst systems for further development of an industrial DRM technology. KW - Dry reforming of methane KW - Carbon dioxide KW - Ni PY - 2017 UR - https://nbn-resolving.org/urn:nbn:de:kobv:b43-402904 DO - https://doi.org/10.3390/catal7050157 SN - 2073-4344 VL - 7 IS - 5 SP - 157, 1 EP - 157, 17 PB - MDPI AN - OPUS4-40290 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - JOUR A1 - Chung, Jae Un A1 - Munz, Martin A1 - Sturm, Heinz T1 - Stiffness variation in the interphase of amine-cured epoxy adjacent to copper microstructures JF - Surface and interface analysis N2 - In an effort to expand the understanding of the mechanical properties of the polymeric interphase on a metal surface, a composite consisting of epoxy and copper was prepared and analyzed. Scanning force microscopy-based force modulation microscopy (SFM-FMM) was employed along with dynamic mechanical analysis (DMA) and energy dispersive X-ray analysis (EDX). Diglycidyl ether of bisphenol A (DGEBA)-based epoxy resins were applied with amine curing agents. The samples were made taking advantage of electron beam lithography (EBL) in order to produce sharp edges of copper structures and a flat surface suitable for the SFM-FMM analysis, which was able to depict the stiffness within the interphase. It is considered significant information because the mechanical characteristic within the narrow interphase was revealed. Comparing with DMA and EDX, the stiffness information of SFM-FMM demonstrated a matching correlation and agreement in terms of preferential adsorption of the curing agent in the vicinity of the interface. The stiffness profiles of the two epoxy systems turned out to be different, and it shows the material dependence of the interphase characteristics. KW - Polymer-metal KW - Interphase KW - Stiffness KW - SFM/AFM KW - DMA KW - EDX KW - Epoxy KW - Copper PY - 2007 SN - 0142-2421 SN - 1096-9918 VL - 39 IS - 7 SP - 624 EP - 633 PB - Wiley CY - Chichester AN - OPUS4-14973 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Fabry, Çağtay A1 - Hirthammer, Volker A1 - Scherer, Martin K. T1 - weldx - welding data exchange format N2 - Scientific welding data covers a wide range of physical domains and timescales and are measured using various different sensors. Complex and highly specialized experimental setups at different welding institutes complicate the exchange of welding research data further. The WelDX research project aims to foster the exchange of scientific data inside the welding community by developing and establishing a new open source file format suitable for the documentation of experimental welding data and upholding associated quality standards. In addition to fostering scientific collaboration inside the national and international welding community an associated advisory committee will be established to oversee the future development of the file format. The proposed file format will be developed with regard to current needs of the community regarding interoperability, data quality and performance and will be published under an appropriate open source license. By using the file format objectivity, comparability and reproducibility across different experimental setups can be improved. KW - Welding KW - Research data management KW - Open science KW - Open Data KW - WelDX PY - 2021 DO - https://doi.org/10.5281/zenodo.6563282 PB - Zenodo CY - Geneva AN - OPUS4-55226 LA - eng AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER - TY - GEN A1 - Rübner, Katrin A1 - Seher, Julia A1 - Müller, Constanze A1 - Müller, Anette A1 - Liebezeit, Steffen A1 - Schnell, Alexander A1 - Martin, Falk ED - Schermer, Detleff ED - Brehm, Eric T1 - REALight - Leichtgranulate und REA-Gips aus feinkörnigen sulfatbelasteten Bau- und Abbruchabfällen und industriellen Nebenprodukten T2 - Mauerwerk-Kalender 2024 N2 - Die Zielstellung des Forschungsprojekts REALight ist die Entwicklung eines Verfahrens zur Herstellung von Leichtgranulaten auf der Grundlage der Ergebnisse des BMBF-Projekts „Aufbaukörnungen“ unter Erweiterung der Technologie, um Gips zurückzugewinnen und weitere mineralische Einsatzstoffe zu nutzen. In einem thermischen Verfahren werden mineralische Bau- und Abbruchabfälle über ein rohstoffliches Recycling, d. h. einen thermisch-chemischen Stoffumwandlungsprozess, zu leichten Gesteinskörnungen verarbeitet. Dabei werden im Bauschutt vorhandene Sulfate zersetzt. In einer anschließenden Rauchgaswäsche werden die Sulfate abgetrennt. Sie können als Ersatz für REA-Gips verwendet werden. Dies ist Voraussetzung für die Übertragung der Produkt- und Verfahrensidee in die Praxis und für den Nachweis der Sulfatabtrennung und -rückgewinnung aus gipshaltigem Inputmaterial. Es werden Untersuchungen zur Verbreiterung der Rohstoffbasis durch Einkopplung spezifischer mineralischer Stoffströme durchgeführt, die im Ergebnis zu einer Reduktion des Blähmittelbedarfs und einer Absenkung der Brenntemperatur führen sollen. Die Herstellung ausreichender Mengen Leichtgranulate für eine umfassende Charakterisierung nach Norm und die Praxiserprobung in bekannten Anwendungen und neuen Einsatzfeldern ist ein weiteres Projektziel. KW - Bau- und Abbruchabfälle KW - Bauschutt KW - Leichtgranulat KW - Leichte Gesteinskörnung KW - Gipsrückgewinnung PY - 2024 UR - https://www.ernst-und-sohn.de/mauerwerk-kalender-2024-schwerpunkte-klimagerechtes-und-nachhaltiges-bauen-befestigungen-bauen-im?tab=inhalt#rs SN - 978-3-433-03408-8 SP - 515 EP - 518 PB - Ernst & Sohn CY - Berlin AN - OPUS4-60356 LA - deu AD - Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin, Germany ER -